kernel/watchdog: Prevent false positives with turbo modes

The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.

The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.

A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.

Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.

That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.

Fixes: 58687acba592 ("lockup_detector: Combine nmi_watchdog and softlockup detector")
Reported-and-tested-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dzickus@redhat.com
Cc: prarit@redhat.com
Cc: ak@linux.intel.com
Cc: babu.moger@oracle.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: acme@redhat.com
Cc: stable@vger.kernel.org
Cc: atomlin@redhat.com
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos

1 files changed, 59 insertions, 0 deletions

diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c
index 295a0d84934c..3a09ea1b1d3d 100644
--- a/kernel/watchdog_hld.c
+++ b/kernel/watchdog_hld.c
@@ -37,6 +37,62 @@ void arch_touch_nmi_watchdog(void)
 }
 EXPORT_SYMBOL(arch_touch_nmi_watchdog);
 
+#ifdef CONFIG_HARDLOCKUP_CHECK_TIMESTAMP
+static DEFINE_PER_CPU(ktime_t, last_timestamp);
+static DEFINE_PER_CPU(unsigned int, nmi_rearmed);
+static ktime_t watchdog_hrtimer_sample_threshold __read_mostly;
+
+void watchdog_update_hrtimer_threshold(u64 period)
+{
+	/*
+	 * The hrtimer runs with a period of (watchdog_threshold * 2) / 5
+	 *
+	 * So it runs effectively with 2.5 times the rate of the NMI
+	 * watchdog. That means the hrtimer should fire 2-3 times before
+	 * the NMI watchdog expires. The NMI watchdog on x86 is based on
+	 * unhalted CPU cycles, so if Turbo-Mode is enabled the CPU cycles
+	 * might run way faster than expected and the NMI fires in a
+	 * smaller period than the one deduced from the nominal CPU
+	 * frequency. Depending on the Turbo-Mode factor this might be fast
+	 * enough to get the NMI period smaller than the hrtimer watchdog
+	 * period and trigger false positives.
+	 *
+	 * The sample threshold is used to check in the NMI handler whether
+	 * the minimum time between two NMI samples has elapsed. That
+	 * prevents false positives.
+	 *
+	 * Set this to 4/5 of the actual watchdog threshold period so the
+	 * hrtimer is guaranteed to fire at least once within the real
+	 * watchdog threshold.
+	 */
+	watchdog_hrtimer_sample_threshold = period * 2;
+}
+
+static bool watchdog_check_timestamp(void)
+{
+	ktime_t delta, now = ktime_get_mono_fast_ns();
+
+	delta = now - __this_cpu_read(last_timestamp);
+	if (delta < watchdog_hrtimer_sample_threshold) {
+		/*
+		 * If ktime is jiffies based, a stalled timer would prevent
+		 * jiffies from being incremented and the filter would look
+		 * at a stale timestamp and never trigger.
+		 */
+		if (__this_cpu_inc_return(nmi_rearmed) < 10)
+			return false;
+	}
+	__this_cpu_write(nmi_rearmed, 0);
+	__this_cpu_write(last_timestamp, now);
+	return true;
+}
+#else
+static inline bool watchdog_check_timestamp(void)
+{
+	return true;
+}
+#endif
+
 static struct perf_event_attr wd_hw_attr = {
 	.type		= PERF_TYPE_HARDWARE,
 	.config		= PERF_COUNT_HW_CPU_CYCLES,
@@ -61,6 +117,9 @@ static void watchdog_overflow_callback(struct perf_event *event,
 		return;
 	}
 
+	if (!watchdog_check_timestamp())
+		return;
+
 	/* check for a hardlockup
 	 * This is done by making sure our timer interrupt
 	 * is incrementing.  The timer interrupt should have