Merge tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add upper and lower limits clamps for the cooling device state in the
   power allocator governor (Michael Kao)

 - Add upper and lower limits support for the power allocator governor
   (Lukasz Luba)

 - Optimize conditions testing for the trip points (Bernard Zhao)

 - Replace spin_lock_irqsave by spin_lock in hard IRQ on the rcar driver
   (Tian Tao)

 - Add MT8516 dt-bindings and device reset optional support (Fabien
   Parent)

 - Add a quiescent period to cool down the PCH when entering S0iX
   (Sumeet Pawnikar)

 - Use bitmap API instead of re-inventing the wheel on sun8i (Yangtao
   Li)

 - Remove useless NULL check in the hwmon driver (Bernard Zhao)

 - Update the current state in the cpufreq cooling device only if the
   frequency change is effective (Zhuguangqing)

 - Improve the schema validation for the rcar DT bindings (Geert
   Uytterhoeven)

 - Fix the user time unit in the documentation (Viresh Kumar)

 - Add PCI ids for Lewisburg PCH (Andres Freund)

 - Add hwmon support on amlogic (Martin Blumenstingl)

 - Fix build failure for PCH entering on in S0iX (Randy Dunlap)

 - Improve the k_* coefficient for the power allocator governor (Lukasz
   Luba)

 - Fix missing const on a sysfs attribute (Rikard Falkeborn)

 - Remove broken interrupt support on rcar to be replaced by a new one
   (Niklas Söderlund)

 - Improve the error code handling at init time on imx8mm (Fabio
   Estevam)

 - Compute interval validity once instead at each temperature reading
   iteration on acerhdf (Daniel Lezcano)

 - Add r8a779a0 support (Niklas Söderlund)

 - Add PCI ids for AlderLake PCH and mmio refactoring (Srinivas
   Pandruvada)

 - Add RFIM and mailbox support on int340x (Srinivas Pandruvada)

 - Use macro for temperature calculation on PCH (Sumeet Pawnikar)

 - Simplify return conditions at probe time on Broadcom (Zheng Yongjun)

 - Fix workload name on PCH (Srinivas Pandruvada)

 - Migrate the devfreq cooling device code to the energy model API
   (Lukasz Luba)

 - Emit a warning if the thermal_zone_device_update is called without
   the .get_temp() ops (Daniel Lezcano)

 - Add critical and hot ops for the thermal zone (Daniel Lezcano)

 - Remove notification usage when critical is reached on rcar (Daniel
   Lezcano)

 - Fix devfreq build when ENERGY_MODEL is not set (Lukasz Luba)

* tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
  thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL
  thermal/drivers/rcar: Remove notification usage
  thermal/core: Add critical and hot ops
  thermal/core: Emit a warning if the thermal zone is updated without ops
  drm/panfrost: Register devfreq cooling and attempt to add Energy Model
  thermal: devfreq_cooling: remove old power model and use EM
  thermal: devfreq_cooling: add new registration functions with Energy Model
  thermal: devfreq_cooling: use a copy of device status
  thermal: devfreq_cooling: change tracing function and arguments
  thermal: int340x: processor_thermal: Correct workload type name
  thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()
  thermal: intel: pch: use macro for temperature calculation
  thermal: int340x: processor_thermal: Add mailbox driver
  thermal: int340x: processor_thermal: Add RFIM driver
  thermal: int340x: processor_thermal: Add AlderLake PCI device id
  thermal: int340x: processor_thermal: Refactor MMIO interface
  thermal: rcar_gen3_thermal: Add r8a779a0 support
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
  platform/x86/drivers/acerhdf: Check the interval value when it is set
  platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval
  ...

3 files changed, 22 insertions, 27 deletions

diff --git a/include/linux/devfreq_cooling.h b/include/linux/devfreq_cooling.h
index 9df2dfca68dd..14baa73fc2de 100644
--- a/include/linux/devfreq_cooling.h
+++ b/include/linux/devfreq_cooling.h
@@ -16,17 +16,6 @@
 
 /**
  * struct devfreq_cooling_power - Devfreq cooling power ops
- * @get_static_power:	Take voltage, in mV, and return the static power
- *			in mW.  If NULL, the static power is assumed
- *			to be 0.
- * @get_dynamic_power:	Take voltage, in mV, and frequency, in HZ, and
- *			return the dynamic power draw in mW.  If NULL,
- *			a simple power model is used.
- * @dyn_power_coeff:	Coefficient for the simple dynamic power model in
- *			mW/(MHz mV mV).
- *			If get_dynamic_power() is NULL, then the
- *			dynamic power is calculated as
- *			@dyn_power_coeff * frequency * voltage^2
  * @get_real_power:	When this is set, the framework uses it to ask the
  *			device driver for the actual power.
  *			Some devices have more sophisticated methods
@@ -46,14 +35,8 @@
  *			max total (static + dynamic) power value for each OPP.
  */
 struct devfreq_cooling_power {
-	unsigned long (*get_static_power)(struct devfreq *devfreq,
-					  unsigned long voltage);
-	unsigned long (*get_dynamic_power)(struct devfreq *devfreq,
-					   unsigned long freq,
-					   unsigned long voltage);
 	int (*get_real_power)(struct devfreq *df, u32 *power,
 			      unsigned long freq, unsigned long voltage);
-	unsigned long dyn_power_coeff;
 };
 
 #ifdef CONFIG_DEVFREQ_THERMAL
@@ -65,6 +48,9 @@ struct thermal_cooling_device *
 of_devfreq_cooling_register(struct device_node *np, struct devfreq *df);
 struct thermal_cooling_device *devfreq_cooling_register(struct devfreq *df);
 void devfreq_cooling_unregister(struct thermal_cooling_device *dfc);
+struct thermal_cooling_device *
+devfreq_cooling_em_register(struct devfreq *df,
+			    struct devfreq_cooling_power *dfc_power);
 
 #else /* !CONFIG_DEVFREQ_THERMAL */
 
@@ -87,6 +73,13 @@ devfreq_cooling_register(struct devfreq *df)
 	return ERR_PTR(-EINVAL);
 }
 
+static inline struct thermal_cooling_device *
+devfreq_cooling_em_register(struct devfreq *df,
+			    struct devfreq_cooling_power *dfc_power)
+{
+	return ERR_PTR(-EINVAL);
+}
+
 static inline void
 devfreq_cooling_unregister(struct thermal_cooling_device *dfc)
 {
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index d07ea27e72a9..31b84404f047 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -79,6 +79,8 @@ struct thermal_zone_device_ops {
 			  enum thermal_trend *);
 	int (*notify) (struct thermal_zone_device *, int,
 		       enum thermal_trip_type);
+	void (*hot)(struct thermal_zone_device *);
+	void (*critical)(struct thermal_zone_device *);
 };
 
 struct thermal_cooling_device_ops {
@@ -399,6 +401,7 @@ void thermal_cdev_update(struct thermal_cooling_device *);
 void thermal_notify_framework(struct thermal_zone_device *, int);
 int thermal_zone_device_enable(struct thermal_zone_device *tz);
 int thermal_zone_device_disable(struct thermal_zone_device *tz);
+void thermal_zone_device_critical(struct thermal_zone_device *tz);
 #else
 static inline struct thermal_zone_device *thermal_zone_device_register(
 	const char *type, int trips, int mask, void *devdata,
diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h
index 135e5421f003..8a5f04888abd 100644
--- a/include/trace/events/thermal.h
+++ b/include/trace/events/thermal.h
@@ -153,31 +153,30 @@ TRACE_EVENT(thermal_power_cpu_limit,
 TRACE_EVENT(thermal_power_devfreq_get_power,
 	TP_PROTO(struct thermal_cooling_device *cdev,
 		 struct devfreq_dev_status *status, unsigned long freq,
-		u32 dynamic_power, u32 static_power, u32 power),
+		u32 power),
 
-	TP_ARGS(cdev, status,  freq, dynamic_power, static_power, power),
+	TP_ARGS(cdev, status,  freq, power),
 
 	TP_STRUCT__entry(
 		__string(type,         cdev->type    )
 		__field(unsigned long, freq          )
-		__field(u32,           load          )
-		__field(u32,           dynamic_power )
-		__field(u32,           static_power  )
+		__field(u32,           busy_time)
+		__field(u32,           total_time)
 		__field(u32,           power)
 	),
 
 	TP_fast_assign(
 		__assign_str(type, cdev->type);
 		__entry->freq = freq;
-		__entry->load = (100 * status->busy_time) / status->total_time;
-		__entry->dynamic_power = dynamic_power;
-		__entry->static_power = static_power;
+		__entry->busy_time = status->busy_time;
+		__entry->total_time = status->total_time;
 		__entry->power = power;
 	),
 
-	TP_printk("type=%s freq=%lu load=%u dynamic_power=%u static_power=%u power=%u",
+	TP_printk("type=%s freq=%lu load=%u power=%u",
 		__get_str(type), __entry->freq,
-		__entry->load, __entry->dynamic_power, __entry->static_power,
+		__entry->total_time == 0 ? 0 :
+			(100 * __entry->busy_time) / __entry->total_time,
 		__entry->power)
 );