Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...

14 files changed, 456 insertions, 39 deletions

diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
new file mode 100644
index 000000000000..524d6077ac1b
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
@@ -0,0 +1,210 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+
+/*	RESET0					*/
+#define RESET_HIU			0
+/*					1	*/
+#define RESET_DOS_RESET			2
+#define RESET_DDR_TOP			3
+#define RESET_DCU_RESET			4
+#define RESET_VIU			5
+#define RESET_AIU			6
+#define RESET_VID_PLL_DIV		7
+/*					8	*/
+#define RESET_PMUX			9
+#define RESET_VENC			10
+#define RESET_ASSIST			11
+#define RESET_AFIFO2			12
+#define RESET_VCBUS			13
+/*					14	*/
+/*					15	*/
+#define RESET_GIC			16
+#define RESET_CAPB3_DECODE		17
+#define RESET_NAND_CAPB3		18
+#define RESET_HDMITX_CAPB3		19
+#define RESET_MALI_CAPB3		20
+#define RESET_DOS_CAPB3			21
+#define RESET_SYS_CPU_CAPB3		22
+#define RESET_CBUS_CAPB3		23
+#define RESET_AHB_CNTL			24
+#define RESET_AHB_DATA			25
+#define RESET_VCBUS_CLK81		26
+#define RESET_MMC			27
+#define RESET_MIPI_0			28
+#define RESET_MIPI_1			29
+#define RESET_MIPI_2			30
+#define RESET_MIPI_3			31
+/*	RESET1					*/
+#define RESET_CPPM			32
+#define RESET_DEMUX			33
+#define RESET_USB_OTG			34
+#define RESET_DDR			35
+#define RESET_AO_RESET			36
+#define RESET_BT656			37
+#define RESET_AHB_SRAM			38
+/*					39	*/
+#define RESET_PARSER			40
+#define RESET_BLKMV			41
+#define RESET_ISA			42
+#define RESET_ETHERNET			43
+#define RESET_SD_EMMC_A			44
+#define RESET_SD_EMMC_B			45
+#define RESET_SD_EMMC_C			46
+#define RESET_ROM_BOOT			47
+#define RESET_SYS_CPU_0			48
+#define RESET_SYS_CPU_1			49
+#define RESET_SYS_CPU_2			50
+#define RESET_SYS_CPU_3			51
+#define RESET_SYS_CPU_CORE_0		52
+#define RESET_SYS_CPU_CORE_1		53
+#define RESET_SYS_CPU_CORE_2		54
+#define RESET_SYS_CPU_CORE_3		55
+#define RESET_SYS_PLL_DIV		56
+#define RESET_SYS_CPU_AXI		57
+#define RESET_SYS_CPU_L2		58
+#define RESET_SYS_CPU_P			59
+#define RESET_SYS_CPU_MBIST		60
+/*					61	*/
+/*					62	*/
+/*					63	*/
+/*	RESET2					*/
+#define RESET_VD_RMEM			64
+#define RESET_AUDIN			65
+#define RESET_HDMI_TX			66
+/*					67	*/
+/*					68	*/
+/*					69	*/
+#define RESET_GE2D			70
+#define RESET_PARSER_REG		71
+#define RESET_PARSER_FETCH		72
+#define RESET_PARSER_CTL		73
+#define RESET_PARSER_TOP		74
+/*					75	*/
+/*					76	*/
+#define RESET_AO_CPU_RESET		77
+#define RESET_MALI			78
+#define RESET_HDMI_SYSTEM_RESET		79
+/*					80-95	*/
+/*	RESET3					*/
+#define RESET_RING_OSCILLATOR		96
+#define RESET_SYS_CPU			97
+#define RESET_EFUSE			98
+#define RESET_SYS_CPU_BVCI		99
+#define RESET_AIFIFO			100
+#define RESET_TVFE			101
+#define RESET_AHB_BRIDGE_CNTL		102
+/*					103	*/
+#define RESET_AUDIO_DAC			104
+#define RESET_DEMUX_TOP			105
+#define RESET_DEMUX_DES			106
+#define RESET_DEMUX_S2P_0		107
+#define RESET_DEMUX_S2P_1		108
+#define RESET_DEMUX_RESET_0		109
+#define RESET_DEMUX_RESET_1		110
+#define RESET_DEMUX_RESET_2		111
+/*					112-127	*/
+/*	RESET4					*/
+/*					128	*/
+/*					129	*/
+/*					130	*/
+/*					131	*/
+#define RESET_DVIN_RESET		132
+#define RESET_RDMA			133
+#define RESET_VENCI			134
+#define RESET_VENCP			135
+/*					136	*/
+#define RESET_VDAC			137
+#define RESET_RTC			138
+/*					139	*/
+#define RESET_VDI6			140
+#define RESET_VENCL			141
+#define RESET_I2C_MASTER_2		142
+#define RESET_I2C_MASTER_1		143
+/*					144-159	*/
+/*	RESET5					*/
+/*					160-191	*/
+/*	RESET6					*/
+#define RESET_PERIPHS_GENERAL		192
+#define RESET_PERIPHS_SPICC		193
+#define RESET_PERIPHS_SMART_CARD	194
+#define RESET_PERIPHS_SAR_ADC		195
+#define RESET_PERIPHS_I2C_MASTER_0	196
+#define RESET_SANA			197
+/*					198	*/
+#define RESET_PERIPHS_STREAM_INTERFACE	199
+#define RESET_PERIPHS_SDIO		200
+#define RESET_PERIPHS_UART_0		201
+#define RESET_PERIPHS_UART_1_2		202
+#define RESET_PERIPHS_ASYNC_0		203
+#define RESET_PERIPHS_ASYNC_1		204
+#define RESET_PERIPHS_SPI_0		205
+#define RESET_PERIPHS_SDHC		206
+#define RESET_UART_SLIP			207
+/*					208-223	*/
+/*	RESET7					*/
+#define RESET_USB_DDR_0			224
+#define RESET_USB_DDR_1			225
+#define RESET_USB_DDR_2			226
+#define RESET_USB_DDR_3			227
+/*					228	*/
+#define RESET_DEVICE_MMC_ARB		229
+/*					230	*/
+#define RESET_VID_LOCK			231
+#define RESET_A9_DMC_PIPEL		232
+/*					233-255	*/
+
+#endif
diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h
new file mode 100644
index 000000000000..614aff2c7aff
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h
@@ -0,0 +1,175 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
+
+/*	RESET0					*/
+#define RESET_HIU			0
+#define RESET_VLD			1
+#define RESET_IQIDCT			2
+#define RESET_MC			3
+/*					8	*/
+#define RESET_VIU			5
+#define RESET_AIU			6
+#define RESET_MCPU			7
+#define RESET_CCPU			8
+#define RESET_PMUX			9
+#define RESET_VENC			10
+#define RESET_ASSIST			11
+#define RESET_AFIFO2			12
+#define RESET_MDEC			13
+#define RESET_VLD_PART			14
+#define RESET_VIFIFO			15
+/*					16-31	*/
+/*	RESET1					*/
+/*					32	*/
+#define RESET_DEMUX			33
+#define RESET_USB_OTG			34
+#define RESET_DDR			35
+#define RESET_VDAC_1			36
+#define RESET_BT656			37
+#define RESET_AHB_SRAM			38
+#define RESET_AHB_BRIDGE		39
+#define RESET_PARSER			40
+#define RESET_BLKMV			41
+#define RESET_ISA			42
+#define RESET_ETHERNET			43
+#define RESET_ABUF			44
+#define RESET_AHB_DATA			45
+#define RESET_AHB_CNTL			46
+#define RESET_ROM_BOOT			47
+/*					48-63	*/
+/*	RESET2					*/
+#define RESET_VD_RMEM			64
+#define RESET_AUDIN			65
+#define RESET_DBLK			66
+#define RESET_PIC_DC			66
+#define RESET_PSC			66
+#define RESET_NAND			66
+#define RESET_GE2D			70
+#define RESET_PARSER_REG		71
+#define RESET_PARSER_FETCH		72
+#define RESET_PARSER_CTL		73
+#define RESET_PARSER_TOP		74
+#define RESET_HDMI_APB			75
+#define RESET_AUDIO_APB			76
+#define RESET_MEDIA_CPU			77
+#define RESET_MALI			78
+#define RESET_HDMI_SYSTEM_RESET		79
+/*					80-95	*/
+/*	RESET3					*/
+#define RESET_RING_OSCILLATOR		96
+#define RESET_SYS_CPU_0			97
+#define RESET_EFUSE			98
+#define RESET_SYS_CPU_BVCI		99
+#define RESET_AIFIFO			100
+#define RESET_AUDIO_PLL_MODULATOR	101
+#define RESET_AHB_BRIDGE_CNTL		102
+#define RESET_SYS_CPU_1			103
+#define RESET_AUDIO_DAC			104
+#define RESET_DEMUX_TOP			105
+#define RESET_DEMUX_DES			106
+#define RESET_DEMUX_S2P_0		107
+#define RESET_DEMUX_S2P_1		108
+#define RESET_DEMUX_RESET_0		109
+#define RESET_DEMUX_RESET_1		110
+#define RESET_DEMUX_RESET_2		111
+/*					112-127	*/
+/*	RESET4					*/
+#define RESET_PL310			128
+#define RESET_A5_APB			129
+#define RESET_A5_AXI			130
+#define RESET_A5			131
+#define RESET_DVIN			132
+#define RESET_RDMA			133
+#define RESET_VENCI			134
+#define RESET_VENCP			135
+#define RESET_VENCT			136
+#define RESET_VDAC_4			137
+#define RESET_RTC			138
+#define RESET_A5_DEBUG			139
+#define RESET_VDI6			140
+#define RESET_VENCL			141
+/*					142-159	*/
+/*	RESET5					*/
+#define RESET_DDR_PLL			160
+#define RESET_MISC_PLL			161
+#define RESET_SYS_PLL			162
+#define RESET_HPLL_PLL			163
+#define RESET_AUDIO_PLL			164
+#define RESET_VID2_PLL			165
+/*					166-191	*/
+/*	RESET6					*/
+#define RESET_PERIPHS_GENERAL		192
+#define RESET_PERIPHS_IR_REMOTE		193
+#define RESET_PERIPHS_SMART_CARD	194
+#define RESET_PERIPHS_SAR_ADC		195
+#define RESET_PERIPHS_I2C_MASTER_0	196
+#define RESET_PERIPHS_I2C_MASTER_1	197
+#define RESET_PERIPHS_I2C_SLAVE		198
+#define RESET_PERIPHS_STREAM_INTERFACE	199
+#define RESET_PERIPHS_SDIO		200
+#define RESET_PERIPHS_UART_0		201
+#define RESET_PERIPHS_UART_1		202
+#define RESET_PERIPHS_ASYNC_0		203
+#define RESET_PERIPHS_ASYNC_1		204
+#define RESET_PERIPHS_SPI_0		205
+#define RESET_PERIPHS_SPI_1		206
+#define RESET_PERIPHS_LED_PWM		207
+/*					208-223	*/
+/*	RESET7					*/
+/*					224-255	*/
+
+#endif
diff --git a/include/dt-bindings/reset/hisi,hi6220-resets.h b/include/dt-bindings/reset/hisi,hi6220-resets.h
index ca08a7e5248e..322ec5335b65 100644
--- a/include/dt-bindings/reset/hisi,hi6220-resets.h
+++ b/include/dt-bindings/reset/hisi,hi6220-resets.h
@@ -64,4 +64,12 @@
 #define PERIPH_RSDIST9_CARM_SOCDBG      0x507
 #define PERIPH_RSDIST9_CARM_ETM         0x508
 
+#define MEDIA_G3D                       0
+#define MEDIA_CODEC_VPU                 2
+#define MEDIA_CODEC_JPEG                3
+#define MEDIA_ISP                       4
+#define MEDIA_ADE                       5
+#define MEDIA_MMU                       6
+#define MEDIA_XG2RAM1                   7
+
 #endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/
diff --git a/include/dt-bindings/reset/ti-syscon.h b/include/dt-bindings/reset/ti-syscon.h
new file mode 100644
index 000000000000..884fd91df8e9
--- /dev/null
+++ b/include/dt-bindings/reset/ti-syscon.h
@@ -0,0 +1,38 @@
+/*
+ * TI Syscon Reset definitions
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_RESET_TI_SYSCON_H__
+#define __DT_BINDINGS_RESET_TI_SYSCON_H__
+
+/*
+ * The reset does not support the feature and corresponding
+ * values are not valid
+ */
+#define ASSERT_NONE	(1 << 0)
+#define DEASSERT_NONE	(1 << 1)
+#define STATUS_NONE	(1 << 2)
+
+/* When set this function is activated by setting(vs clearing) this bit */
+#define ASSERT_SET	(1 << 3)
+#define DEASSERT_SET	(1 << 4)
+#define STATUS_SET	(1 << 5)
+
+/* The following are the inverse of the above and are added for consistency */
+#define ASSERT_CLEAR	(0 << 3)
+#define DEASSERT_CLEAR	(0 << 4)
+#define STATUS_CLEAR	(0 << 5)
+
+#endif
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 689312745b2f..01024d1aed0e 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -37,12 +37,6 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 	return ab8500_sysctrl_write(reg, bits, 0);
 }
 
-/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
-struct ab8500_sysctrl_platform_data {
-	u8 initial_req_buf_config[8];
-	u16 (*reboot_reason_code)(const char *cmd);
-};
-
 /* Registers */
 #define AB8500_TURNONSTATUS		0x100
 #define AB8500_RESETSTATUS		0x101
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index bf5109d38a26..5d374601404c 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -178,16 +178,6 @@ enum ddr_pwrst {
 
 #define DB8500_PRCMU_LEGACY_OFFSET		0xDD4
 
-struct prcmu_pdata
-{
-	bool enable_set_ddr_opp;
-	bool enable_ape_opp_100_voltage;
-	struct ab8500_platform_data *ab_platdata;
-	u32 version_offset;
-	u32 legacy_offset;
-	u32 adt_offset;
-};
-
 #define PRCMU_FW_PROJECT_U8500		2
 #define PRCMU_FW_PROJECT_U8400		3
 #define PRCMU_FW_PROJECT_U9500		4 /* Customer specific */
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
deleted file mode 100644
index 3af0da1f3be5..000000000000
--- a/include/linux/platform_data/clk-ux500.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Clock definitions for ux500 platforms
- *
- * Copyright (C) 2012 ST-Ericsson SA
- * Author: Ulf Hansson <ulf.hansson@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __CLK_UX500_H
-#define __CLK_UX500_H
-
-void u8500_clk_init(void);
-void u9540_clk_init(void);
-void u8540_clk_init(void);
-
-#endif /* __CLK_UX500_H */
diff --git a/include/linux/platform_data/media/ir-rx51.h b/include/linux/platform_data/media/ir-rx51.h
index 3038120ca46e..812d87307877 100644
--- a/include/linux/platform_data/media/ir-rx51.h
+++ b/include/linux/platform_data/media/ir-rx51.h
@@ -2,10 +2,7 @@
 #define _LIRC_RX51_H
 
 struct lirc_rx51_platform_data {
-	int pwm_timer;
-
 	int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
-	struct pwm_omap_dmtimer_pdata *dmtimer;
 };
 
 #endif
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 9e12000914b3..cc32ab852fbc 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -29,6 +29,14 @@ extern bool qcom_scm_hdcp_available(void);
 extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
 		u32 *resp);
 
+extern bool qcom_scm_pas_supported(u32 peripheral);
+extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
+		size_t size);
+extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
+		phys_addr_t size);
+extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
+extern int qcom_scm_pas_shutdown(u32 peripheral);
+
 #define QCOM_SCM_CPU_PWR_DOWN_L2_ON	0x0
 #define QCOM_SCM_CPU_PWR_DOWN_L2_OFF	0x1
 
diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
index b91ba932bbd4..db1fe6772ad5 100644
--- a/include/linux/reset-controller.h
+++ b/include/linux/reset-controller.h
@@ -53,4 +53,8 @@ struct reset_controller_dev {
 int reset_controller_register(struct reset_controller_dev *rcdev);
 void reset_controller_unregister(struct reset_controller_dev *rcdev);
 
+struct device;
+int devm_reset_controller_register(struct device *dev,
+				   struct reset_controller_dev *rcdev);
+
 #endif
diff --git a/include/linux/reset.h b/include/linux/reset.h
index 45a4abeb6acb..5daff15722d3 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -71,14 +71,14 @@ static inline struct reset_control *__of_reset_control_get(
 					struct device_node *node,
 					const char *id, int index, int shared)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline struct reset_control *__devm_reset_control_get(
 					struct device *dev,
 					const char *id, int index, int shared)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 #endif /* CONFIG_RESET_CONTROLLER */
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
index 35de50a65665..dc5f989be226 100644
--- a/include/linux/scpi_protocol.h
+++ b/include/linux/scpi_protocol.h
@@ -70,6 +70,8 @@ struct scpi_ops {
 	int (*sensor_get_capability)(u16 *sensors);
 	int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *);
 	int (*sensor_get_value)(u16, u64 *);
+	int (*device_get_power_state)(u16);
+	int (*device_set_power_state)(u16, u8);
 };
 
 #if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL)
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
new file mode 100644
index 000000000000..a37bc5538f19
--- /dev/null
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -0,0 +1,8 @@
+#ifndef __WCNSS_CTRL_H__
+#define __WCNSS_CTRL_H__
+
+#include <linux/soc/qcom/smd.h>
+
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
+
+#endif
diff --git a/include/soc/tegra/cpuidle.h b/include/soc/tegra/cpuidle.h
index ea04f4225638..1fae9c7800d1 100644
--- a/include/soc/tegra/cpuidle.h
+++ b/include/soc/tegra/cpuidle.h
@@ -14,7 +14,7 @@
 #ifndef __SOC_TEGRA_CPUIDLE_H__
 #define __SOC_TEGRA_CPUIDLE_H__
 
-#ifdef CONFIG_CPU_IDLE
+#if defined(CONFIG_ARM) && defined(CONFIG_CPU_IDLE)
 void tegra_cpuidle_pcie_irqs_in_use(void);
 #else
 static inline void tegra_cpuidle_pcie_irqs_in_use(void)