Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

4 files changed, 109 insertions, 30 deletions

diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
index f88c1cc0cb0f..a9e8bd157673 100644
--- a/include/linux/mfd/mcp.h
+++ b/include/linux/mfd/mcp.h
@@ -10,8 +10,6 @@
 #ifndef MCP_H
 #define MCP_H
 
-#include <mach/dma.h>
-
 struct mcp_ops;
 
 struct mcp {
@@ -21,12 +19,7 @@ struct mcp {
 	int		use_count;
 	unsigned int	sclk_rate;
 	unsigned int	rw_timeout;
-	dma_device_t	dma_audio_rd;
-	dma_device_t	dma_audio_wr;
-	dma_device_t	dma_telco_rd;
-	dma_device_t	dma_telco_wr;
 	struct device	attached_device;
-	int		gpio_base;
 };
 
 struct mcp_ops {
@@ -47,15 +40,14 @@ void mcp_disable(struct mcp *);
 #define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
 
 struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *);
-void mcp_host_unregister(struct mcp *);
+int mcp_host_add(struct mcp *, void *);
+void mcp_host_del(struct mcp *);
+void mcp_host_free(struct mcp *);
 
 struct mcp_driver {
 	struct device_driver drv;
 	int (*probe)(struct mcp *);
 	void (*remove)(struct mcp *);
-	int (*suspend)(struct mcp *, pm_message_t);
-	int (*resume)(struct mcp *);
 };
 
 int mcp_driver_register(struct mcp_driver *);
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
index 4321f044d1e4..28af41756360 100644
--- a/include/linux/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -12,7 +12,7 @@
 
 #include <linux/mfd/mcp.h>
 #include <linux/gpio.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
 
 #define UCB_IO_DATA	0x00
 #define UCB_IO_DIR	0x01
@@ -104,17 +104,27 @@
 #define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
 #define UCB_MODE_AUD_OFF_CAN	(1 << 13)
 
+enum ucb1x00_reset {
+	UCB_RST_PROBE,
+	UCB_RST_RESUME,
+	UCB_RST_SUSPEND,
+	UCB_RST_REMOVE,
+	UCB_RST_PROBE_FAIL,
+};
 
-struct ucb1x00_irq {
-	void *devid;
-	void (*fn)(int, void *);
+struct ucb1x00_plat_data {
+	void			(*reset)(enum ucb1x00_reset);
+	unsigned		irq_base;
+	int			gpio_base;
+	unsigned		can_wakeup;
 };
 
 struct ucb1x00 {
-	spinlock_t		lock;
+	raw_spinlock_t		irq_lock;
 	struct mcp		*mcp;
 	unsigned int		irq;
-	struct semaphore	adc_sem;
+	int			irq_base;
+	struct mutex		adc_mutex;
 	spinlock_t		io_lock;
 	u16			id;
 	u16			io_dir;
@@ -122,7 +132,8 @@ struct ucb1x00 {
 	u16			adc_cr;
 	u16			irq_fal_enbl;
 	u16			irq_ris_enbl;
-	struct ucb1x00_irq	irq_handler[16];
+	u16			irq_mask;
+	u16			irq_wake;
 	struct device		dev;
 	struct list_head	node;
 	struct list_head	devs;
@@ -144,7 +155,7 @@ struct ucb1x00_driver {
 	struct list_head	devs;
 	int	(*add)(struct ucb1x00_dev *dev);
 	void	(*remove)(struct ucb1x00_dev *dev);
-	int	(*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
+	int	(*suspend)(struct ucb1x00_dev *dev);
 	int	(*resume)(struct ucb1x00_dev *dev);
 };
 
@@ -245,15 +256,4 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
 void ucb1x00_adc_enable(struct ucb1x00 *ucb);
 void ucb1x00_adc_disable(struct ucb1x00 *ucb);
 
-/*
- * Which edges of the IRQ do you want to control today?
- */
-#define UCB_RISING	(1 << 0)
-#define UCB_FALLING	(1 << 1)
-
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
-
 #endif
diff --git a/include/linux/sa11x0-dma.h b/include/linux/sa11x0-dma.h
new file mode 100644
index 000000000000..65839a58b8e5
--- /dev/null
+++ b/include/linux/sa11x0-dma.h
@@ -0,0 +1,24 @@
+/*
+ * SA11x0 DMA Engine support
+ *
+ * Copyright (C) 2012 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_SA11X0_DMA_H
+#define __LINUX_SA11X0_DMA_H
+
+struct dma_chan;
+
+#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE)
+bool sa11x0_dma_filter_fn(struct dma_chan *, void *);
+#else
+static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d)
+{
+	return false;
+}
+#endif
+
+#endif
diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h
new file mode 100644
index 000000000000..4ab409653785
--- /dev/null
+++ b/include/video/sa1100fb.h
@@ -0,0 +1,63 @@
+/*
+ * StrongARM 1100 LCD Controller Frame Buffer Device
+ *
+ * Copyright (C) 1999 Eric A. Thomas
+ *  Based on acornfb.c Copyright (C) Russell King.
+ *  
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _VIDEO_SA1100FB_H
+#define _VIDEO_SA1100FB_H
+
+#include <linux/fb.h>
+#include <linux/types.h>
+
+#define RGB_4	0
+#define RGB_8	1
+#define RGB_16	2
+#define NR_RGB	3
+
+/* These are the bitfields for each display depth that we support. */
+struct sa1100fb_rgb {
+	struct fb_bitfield	red;
+	struct fb_bitfield	green;
+	struct fb_bitfield	blue;
+	struct fb_bitfield	transp;
+};
+
+/* This structure describes the machine which we are running on. */
+struct sa1100fb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		lccr0;
+	u_int		lccr3;
+
+	/* Overrides for the default RGB maps */
+	const struct sa1100fb_rgb *rgb[NR_RGB];
+
+	void (*backlight_power)(int);
+	void (*lcd_power)(int);
+	void (*set_visual)(u32);
+};
+
+#endif