diff options
| author | Nishanth Menon <nm@ti.com> | 2014-07-22 10:39:54 -0500 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2014-07-23 01:44:50 -0700 |
| commit | 23d9cec07c589276561c13b180577c0b87930140 (patch) | |
| tree | e721dcf07a8c042684b6dd14978ec99e7b45d65d /include | |
| parent | ba394f0b6aa7a4a6afe67176da5d29f0ac59c48d (diff) | |
| download | lwn-23d9cec07c589276561c13b180577c0b87930140.tar.gz lwn-23d9cec07c589276561c13b180577c0b87930140.zip | |
pinctrl: dra: dt-bindings: Fix pull enable/disable
The DRA74/72 control module pins have a weak pull up and pull down.
This is configured by bit offset 17. if BIT(17) is 1, a pull up is
selected, else a pull down is selected.
However, this pull resisstor is applied based on BIT(16) -
PULLUDENABLE - if BIT(18) is *0*, then pull as defined in BIT(17) is
applied, else no weak pulls are applied. We defined this in reverse.
Reference: Table 18-5 (Description of the pad configuration register
bits) in Technical Reference Manual Revision (DRA74x revision Q:
SPRUHI2Q Revised June 2014 and DRA72x revision F: SPRUHP2F - Revised
June 2014)
Fixes: 6e58b8f1daaf1a ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/pinctrl/dra.h | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h index 002a2855c046..3d33794e4f3e 100644 --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h @@ -30,7 +30,8 @@ #define MUX_MODE14 0xe #define MUX_MODE15 0xf -#define PULL_ENA (1 << 16) +#define PULL_ENA (0 << 16) +#define PULL_DIS (1 << 16) #define PULL_UP (1 << 17) #define INPUT_EN (1 << 18) #define SLEWCONTROL (1 << 19) @@ -38,10 +39,10 @@ #define WAKEUP_EVENT (1 << 25) /* Active pin states */ -#define PIN_OUTPUT 0 +#define PIN_OUTPUT (0 | PULL_DIS) #define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) #define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) -#define PIN_INPUT INPUT_EN +#define PIN_INPUT (INPUT_EN | PULL_DIS) #define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL) #define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) #define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) |