Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.8-rc1.

  As usual, Jiri has a bunch of refactoring and cleanups for the tty
  core and drivers in here, along with the usual set of rs485 updates
  (someday this might work properly...)

  Along with those, in here are changes for:

   - sc16is7xx serial driver updates

   - platform driver removal api updates

   - amba-pl011 driver updates

   - tty driver binding updates

   - other small tty/serial driver updates and changes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
  serial: sc16is7xx: refactor EFR lock
  serial: sc16is7xx: reorder code to remove prototype declarations
  serial: sc16is7xx: refactor FIFO access functions to increase commonality
  serial: sc16is7xx: drop unneeded MODULE_ALIAS
  serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
  serial: sc16is7xx: add explicit return for some switch default cases
  serial: sc16is7xx: add macro for max number of UART ports
  serial: sc16is7xx: add driver name to struct uart_driver
  serial: sc16is7xx: use i2c_get_match_data()
  serial: sc16is7xx: use spi_get_device_match_data()
  serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
  serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
  serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
  serial: sc16is7xx: set safe default SPI clock frequency
  serial: sc16is7xx: add check for unsupported SPI modes during probe
  serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
  serial: 8250_exar: Set missing rs485_supported flag
  serial: omap: do not override settings for RS485 support
  serial: core, imx: do not set RS485 enabled if it is not supported
  serial: core: make sure RS485 cannot be enabled when it is not supported
  ...

8 files changed, 184 insertions, 203 deletions

diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index a1307b58cc2c..9120de05ead0 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -10,6 +10,11 @@
 #ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
 #define ASM_ARM_HARDWARE_SERIAL_AMBA_H
 
+#ifndef __ASSEMBLY__
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#endif
+
 #include <linux/types.h>
 
 /* -------------------------------------------------------------------------------
@@ -70,141 +75,145 @@
 #define ZX_UART011_ICR		0x4c
 #define ZX_UART011_DMACR	0x50
 
-#define UART011_DR_OE		(1 << 11)
-#define UART011_DR_BE		(1 << 10)
-#define UART011_DR_PE		(1 << 9)
-#define UART011_DR_FE		(1 << 8)
-
-#define UART01x_RSR_OE 		0x08
-#define UART01x_RSR_BE 		0x04
-#define UART01x_RSR_PE 		0x02
-#define UART01x_RSR_FE 		0x01
-
-#define UART011_FR_RI		0x100
-#define UART011_FR_TXFE		0x080
-#define UART011_FR_RXFF		0x040
-#define UART01x_FR_TXFF		0x020
-#define UART01x_FR_RXFE		0x010
-#define UART01x_FR_BUSY		0x008
-#define UART01x_FR_DCD 		0x004
-#define UART01x_FR_DSR 		0x002
-#define UART01x_FR_CTS 		0x001
+#define UART011_DR_OE		BIT(11)
+#define UART011_DR_BE		BIT(10)
+#define UART011_DR_PE		BIT(9)
+#define UART011_DR_FE		BIT(8)
+
+#define UART01x_RSR_OE		BIT(3)
+#define UART01x_RSR_BE		BIT(2)
+#define UART01x_RSR_PE		BIT(1)
+#define UART01x_RSR_FE		BIT(0)
+
+#define UART011_FR_RI		BIT(8)
+#define UART011_FR_TXFE		BIT(7)
+#define UART011_FR_RXFF		BIT(6)
+#define UART01x_FR_TXFF		(1 << 5)	/* used in ASM */
+#define UART01x_FR_RXFE		BIT(4)
+#define UART01x_FR_BUSY		(1 << 3)	/* used in ASM */
+#define UART01x_FR_DCD		BIT(2)
+#define UART01x_FR_DSR		BIT(1)
+#define UART01x_FR_CTS		BIT(0)
 #define UART01x_FR_TMSK		(UART01x_FR_TXFF + UART01x_FR_BUSY)
 
 /*
  * Some bits of Flag Register on ZTE device have different position from
  * standard ones.
  */
-#define ZX_UART01x_FR_BUSY	0x100
-#define ZX_UART01x_FR_DSR	0x008
-#define ZX_UART01x_FR_CTS	0x002
-#define ZX_UART011_FR_RI	0x001
-
-#define UART011_CR_CTSEN	0x8000	/* CTS hardware flow control */
-#define UART011_CR_RTSEN	0x4000	/* RTS hardware flow control */
-#define UART011_CR_OUT2		0x2000	/* OUT2 */
-#define UART011_CR_OUT1		0x1000	/* OUT1 */
-#define UART011_CR_RTS		0x0800	/* RTS */
-#define UART011_CR_DTR		0x0400	/* DTR */
-#define UART011_CR_RXE		0x0200	/* receive enable */
-#define UART011_CR_TXE		0x0100	/* transmit enable */
-#define UART011_CR_LBE		0x0080	/* loopback enable */
-#define UART010_CR_RTIE		0x0040
-#define UART010_CR_TIE 		0x0020
-#define UART010_CR_RIE 		0x0010
-#define UART010_CR_MSIE		0x0008
-#define ST_UART011_CR_OVSFACT	0x0008	/* Oversampling factor */
-#define UART01x_CR_IIRLP	0x0004	/* SIR low power mode */
-#define UART01x_CR_SIREN	0x0002	/* SIR enable */
-#define UART01x_CR_UARTEN	0x0001	/* UART enable */
- 
-#define UART011_LCRH_SPS	0x80
+#define ZX_UART01x_FR_BUSY	BIT(8)
+#define ZX_UART01x_FR_DSR	BIT(3)
+#define ZX_UART01x_FR_CTS	BIT(1)
+#define ZX_UART011_FR_RI	BIT(0)
+
+#define UART011_CR_CTSEN	BIT(15)	/* CTS hardware flow control */
+#define UART011_CR_RTSEN	BIT(14)	/* RTS hardware flow control */
+#define UART011_CR_OUT2		BIT(13)	/* OUT2 */
+#define UART011_CR_OUT1		BIT(12)	/* OUT1 */
+#define UART011_CR_RTS		BIT(11)	/* RTS */
+#define UART011_CR_DTR		BIT(10)	/* DTR */
+#define UART011_CR_RXE		BIT(9)	/* receive enable */
+#define UART011_CR_TXE		BIT(8)	/* transmit enable */
+#define UART011_CR_LBE		BIT(7)	/* loopback enable */
+#define UART010_CR_RTIE		BIT(6)
+#define UART010_CR_TIE		BIT(5)
+#define UART010_CR_RIE		BIT(4)
+#define UART010_CR_MSIE		BIT(3)
+#define ST_UART011_CR_OVSFACT	BIT(3)	/* Oversampling factor */
+#define UART01x_CR_IIRLP	BIT(2)	/* SIR low power mode */
+#define UART01x_CR_SIREN	BIT(1)	/* SIR enable */
+#define UART01x_CR_UARTEN	BIT(0)	/* UART enable */
+
+#define UART011_LCRH_SPS	BIT(7)
 #define UART01x_LCRH_WLEN_8	0x60
 #define UART01x_LCRH_WLEN_7	0x40
 #define UART01x_LCRH_WLEN_6	0x20
 #define UART01x_LCRH_WLEN_5	0x00
-#define UART01x_LCRH_FEN	0x10
-#define UART01x_LCRH_STP2	0x08
-#define UART01x_LCRH_EPS	0x04
-#define UART01x_LCRH_PEN	0x02
-#define UART01x_LCRH_BRK	0x01
-
-#define ST_UART011_DMAWM_RX_1	(0 << 3)
-#define ST_UART011_DMAWM_RX_2	(1 << 3)
-#define ST_UART011_DMAWM_RX_4	(2 << 3)
-#define ST_UART011_DMAWM_RX_8	(3 << 3)
-#define ST_UART011_DMAWM_RX_16	(4 << 3)
-#define ST_UART011_DMAWM_RX_32	(5 << 3)
-#define ST_UART011_DMAWM_RX_48	(6 << 3)
-#define ST_UART011_DMAWM_TX_1	0
-#define ST_UART011_DMAWM_TX_2	1
-#define ST_UART011_DMAWM_TX_4	2
-#define ST_UART011_DMAWM_TX_8	3
-#define ST_UART011_DMAWM_TX_16	4
-#define ST_UART011_DMAWM_TX_32	5
-#define ST_UART011_DMAWM_TX_48	6
-
-#define UART010_IIR_RTIS	0x08
-#define UART010_IIR_TIS		0x04
-#define UART010_IIR_RIS		0x02
-#define UART010_IIR_MIS		0x01
-
-#define UART011_IFLS_RX1_8	(0 << 3)
-#define UART011_IFLS_RX2_8	(1 << 3)
-#define UART011_IFLS_RX4_8	(2 << 3)
-#define UART011_IFLS_RX6_8	(3 << 3)
-#define UART011_IFLS_RX7_8	(4 << 3)
-#define UART011_IFLS_TX1_8	(0 << 0)
-#define UART011_IFLS_TX2_8	(1 << 0)
-#define UART011_IFLS_TX4_8	(2 << 0)
-#define UART011_IFLS_TX6_8	(3 << 0)
-#define UART011_IFLS_TX7_8	(4 << 0)
+#define UART01x_LCRH_FEN	BIT(4)
+#define UART01x_LCRH_STP2	BIT(3)
+#define UART01x_LCRH_EPS	BIT(2)
+#define UART01x_LCRH_PEN	BIT(1)
+#define UART01x_LCRH_BRK	BIT(0)
+
+#define ST_UART011_DMAWM_RX	GENMASK(5, 3)
+#define ST_UART011_DMAWM_RX_1	FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 0)
+#define ST_UART011_DMAWM_RX_2	FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 1)
+#define ST_UART011_DMAWM_RX_4	FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 2)
+#define ST_UART011_DMAWM_RX_8	FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 3)
+#define ST_UART011_DMAWM_RX_16	FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 4)
+#define ST_UART011_DMAWM_RX_32	FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 5)
+#define ST_UART011_DMAWM_RX_48	FIELD_PREP_CONST(ST_UART011_DMAWM_RX, 6)
+#define ST_UART011_DMAWM_TX	GENMASK(2, 0)
+#define ST_UART011_DMAWM_TX_1	FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 0)
+#define ST_UART011_DMAWM_TX_2	FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 1)
+#define ST_UART011_DMAWM_TX_4	FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 2)
+#define ST_UART011_DMAWM_TX_8	FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 3)
+#define ST_UART011_DMAWM_TX_16	FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 4)
+#define ST_UART011_DMAWM_TX_32	FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 5)
+#define ST_UART011_DMAWM_TX_48	FIELD_PREP_CONST(ST_UART011_DMAWM_TX, 6)
+
+#define UART010_IIR_RTIS	BIT(3)
+#define UART010_IIR_TIS		BIT(2)
+#define UART010_IIR_RIS		BIT(1)
+#define UART010_IIR_MIS		BIT(0)
+
+#define UART011_IFLS_RXIFLSEL	GENMASK(5, 3)
+#define UART011_IFLS_RX1_8	FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 0)
+#define UART011_IFLS_RX2_8	FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 1)
+#define UART011_IFLS_RX4_8	FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 2)
+#define UART011_IFLS_RX6_8	FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 3)
+#define UART011_IFLS_RX7_8	FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 4)
+#define UART011_IFLS_TXIFLSEL	GENMASK(2, 0)
+#define UART011_IFLS_TX1_8	FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 0)
+#define UART011_IFLS_TX2_8	FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 1)
+#define UART011_IFLS_TX4_8	FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 2)
+#define UART011_IFLS_TX6_8	FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 3)
+#define UART011_IFLS_TX7_8	FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 4)
 /* special values for ST vendor with deeper fifo */
-#define UART011_IFLS_RX_HALF	(5 << 3)
-#define UART011_IFLS_TX_HALF	(5 << 0)
-
-#define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
-#define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
-#define UART011_PEIM		(1 << 8)	/* parity error interrupt mask */
-#define UART011_FEIM		(1 << 7)	/* framing error interrupt mask */
-#define UART011_RTIM		(1 << 6)	/* receive timeout interrupt mask */
-#define UART011_TXIM		(1 << 5)	/* transmit interrupt mask */
-#define UART011_RXIM		(1 << 4)	/* receive interrupt mask */
-#define UART011_DSRMIM		(1 << 3)	/* DSR interrupt mask */
-#define UART011_DCDMIM		(1 << 2)	/* DCD interrupt mask */
-#define UART011_CTSMIM		(1 << 1)	/* CTS interrupt mask */
-#define UART011_RIMIM		(1 << 0)	/* RI interrupt mask */
-
-#define UART011_OEIS		(1 << 10)	/* overrun error interrupt status */
-#define UART011_BEIS		(1 << 9)	/* break error interrupt status */
-#define UART011_PEIS		(1 << 8)	/* parity error interrupt status */
-#define UART011_FEIS		(1 << 7)	/* framing error interrupt status */
-#define UART011_RTIS		(1 << 6)	/* receive timeout interrupt status */
-#define UART011_TXIS		(1 << 5)	/* transmit interrupt status */
-#define UART011_RXIS		(1 << 4)	/* receive interrupt status */
-#define UART011_DSRMIS		(1 << 3)	/* DSR interrupt status */
-#define UART011_DCDMIS		(1 << 2)	/* DCD interrupt status */
-#define UART011_CTSMIS		(1 << 1)	/* CTS interrupt status */
-#define UART011_RIMIS		(1 << 0)	/* RI interrupt status */
-
-#define UART011_OEIC		(1 << 10)	/* overrun error interrupt clear */
-#define UART011_BEIC		(1 << 9)	/* break error interrupt clear */
-#define UART011_PEIC		(1 << 8)	/* parity error interrupt clear */
-#define UART011_FEIC		(1 << 7)	/* framing error interrupt clear */
-#define UART011_RTIC		(1 << 6)	/* receive timeout interrupt clear */
-#define UART011_TXIC		(1 << 5)	/* transmit interrupt clear */
-#define UART011_RXIC		(1 << 4)	/* receive interrupt clear */
-#define UART011_DSRMIC		(1 << 3)	/* DSR interrupt clear */
-#define UART011_DCDMIC		(1 << 2)	/* DCD interrupt clear */
-#define UART011_CTSMIC		(1 << 1)	/* CTS interrupt clear */
-#define UART011_RIMIC		(1 << 0)	/* RI interrupt clear */
-
-#define UART011_DMAONERR	(1 << 2)	/* disable dma on error */
-#define UART011_TXDMAE		(1 << 1)	/* enable transmit dma */
-#define UART011_RXDMAE		(1 << 0)	/* enable receive dma */
-
-#define UART01x_RSR_ANY		(UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
-#define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
+#define UART011_IFLS_RX_HALF	FIELD_PREP_CONST(UART011_IFLS_RXIFLSEL, 5)
+#define UART011_IFLS_TX_HALF	FIELD_PREP_CONST(UART011_IFLS_TXIFLSEL, 5)
+
+#define UART011_OEIM		BIT(10)	/* overrun error interrupt mask */
+#define UART011_BEIM		BIT(9)	/* break error interrupt mask */
+#define UART011_PEIM		BIT(8)	/* parity error interrupt mask */
+#define UART011_FEIM		BIT(7)	/* framing error interrupt mask */
+#define UART011_RTIM		BIT(6)	/* receive timeout interrupt mask */
+#define UART011_TXIM		BIT(5)	/* transmit interrupt mask */
+#define UART011_RXIM		BIT(4)	/* receive interrupt mask */
+#define UART011_DSRMIM		BIT(3)	/* DSR interrupt mask */
+#define UART011_DCDMIM		BIT(2)	/* DCD interrupt mask */
+#define UART011_CTSMIM		BIT(1)	/* CTS interrupt mask */
+#define UART011_RIMIM		BIT(0)	/* RI interrupt mask */
+
+#define UART011_OEIS		BIT(10)	/* overrun error interrupt status */
+#define UART011_BEIS		BIT(9)	/* break error interrupt status */
+#define UART011_PEIS		BIT(8)	/* parity error interrupt status */
+#define UART011_FEIS		BIT(7)	/* framing error interrupt status */
+#define UART011_RTIS		BIT(6)	/* receive timeout interrupt status */
+#define UART011_TXIS		BIT(5)	/* transmit interrupt status */
+#define UART011_RXIS		BIT(4)	/* receive interrupt status */
+#define UART011_DSRMIS		BIT(3)	/* DSR interrupt status */
+#define UART011_DCDMIS		BIT(2)	/* DCD interrupt status */
+#define UART011_CTSMIS		BIT(1)	/* CTS interrupt status */
+#define UART011_RIMIS		BIT(0)	/* RI interrupt status */
+
+#define UART011_OEIC		BIT(10)	/* overrun error interrupt clear */
+#define UART011_BEIC		BIT(9)	/* break error interrupt clear */
+#define UART011_PEIC		BIT(8)	/* parity error interrupt clear */
+#define UART011_FEIC		BIT(7)	/* framing error interrupt clear */
+#define UART011_RTIC		BIT(6)	/* receive timeout interrupt clear */
+#define UART011_TXIC		BIT(5)	/* transmit interrupt clear */
+#define UART011_RXIC		BIT(4)	/* receive interrupt clear */
+#define UART011_DSRMIC		BIT(3)	/* DSR interrupt clear */
+#define UART011_DCDMIC		BIT(2)	/* DCD interrupt clear */
+#define UART011_CTSMIC		BIT(1)	/* CTS interrupt clear */
+#define UART011_RIMIC		BIT(0)	/* RI interrupt clear */
+
+#define UART011_DMAONERR	BIT(2)	/* disable dma on error */
+#define UART011_TXDMAE		BIT(1)	/* enable transmit dma */
+#define UART011_RXDMAE		BIT(0)	/* enable receive dma */
+
+#define UART01x_RSR_ANY		(UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE)
+#define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS)
 
 #ifndef __ASSEMBLY__
 struct amba_device; /* in uncompress this is included but amba/bus.h is not */
@@ -220,8 +229,8 @@ struct amba_pl011_data {
 	bool dma_rx_poll_enable;
 	unsigned int dma_rx_poll_rate;
 	unsigned int dma_rx_poll_timeout;
-        void (*init) (void);
-	void (*exit) (void);
+	void (*init)(void);
+	void (*exit)(void);
 };
 #endif
 
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index f5f97fa25e8a..3fab88ba265e 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -27,7 +27,7 @@ struct serdev_device;
  *			not sleep.
  */
 struct serdev_device_ops {
-	int (*receive_buf)(struct serdev_device *, const unsigned char *, size_t);
+	ssize_t (*receive_buf)(struct serdev_device *, const u8 *, size_t);
 	void (*write_wakeup)(struct serdev_device *);
 };
 
@@ -82,7 +82,7 @@ enum serdev_parity {
  * serdev controller structures
  */
 struct serdev_controller_ops {
-	int (*write_buf)(struct serdev_controller *, const unsigned char *, size_t);
+	ssize_t (*write_buf)(struct serdev_controller *, const u8 *, size_t);
 	void (*write_flush)(struct serdev_controller *);
 	int (*write_room)(struct serdev_controller *);
 	int (*open)(struct serdev_controller *);
@@ -99,12 +99,14 @@ struct serdev_controller_ops {
 /**
  * struct serdev_controller - interface to the serdev controller
  * @dev:	Driver model representation of the device.
+ * @host:	Serial port hardware controller device
  * @nr:		number identifier for this controller/bus.
  * @serdev:	Pointer to slave device for this controller.
  * @ops:	Controller operations.
  */
 struct serdev_controller {
 	struct device		dev;
+	struct device		*host;
 	unsigned int		nr;
 	struct serdev_device	*serdev;
 	const struct serdev_controller_ops *ops;
@@ -167,7 +169,9 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *);
 int serdev_device_add(struct serdev_device *);
 void serdev_device_remove(struct serdev_device *);
 
-struct serdev_controller *serdev_controller_alloc(struct device *, size_t);
+struct serdev_controller *serdev_controller_alloc(struct device *host,
+						  struct device *parent,
+						  size_t size);
 int serdev_controller_add(struct serdev_controller *);
 void serdev_controller_remove(struct serdev_controller *);
 
@@ -181,9 +185,9 @@ static inline void serdev_controller_write_wakeup(struct serdev_controller *ctrl
 	serdev->ops->write_wakeup(serdev);
 }
 
-static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
-					      const unsigned char *data,
-					      size_t count)
+static inline ssize_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
+						    const u8 *data,
+						    size_t count)
 {
 	struct serdev_device *serdev = ctrl->serdev;
 
@@ -200,13 +204,13 @@ void serdev_device_close(struct serdev_device *);
 int devm_serdev_device_open(struct device *, struct serdev_device *);
 unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
 void serdev_device_set_flow_control(struct serdev_device *, bool);
-int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
+int serdev_device_write_buf(struct serdev_device *, const u8 *, size_t);
 void serdev_device_wait_until_sent(struct serdev_device *, long);
 int serdev_device_get_tiocm(struct serdev_device *);
 int serdev_device_set_tiocm(struct serdev_device *, int, int);
 int serdev_device_break_ctl(struct serdev_device *serdev, int break_state);
 void serdev_device_write_wakeup(struct serdev_device *);
-int serdev_device_write(struct serdev_device *, const unsigned char *, size_t, long);
+ssize_t serdev_device_write(struct serdev_device *, const u8 *, size_t, long);
 void serdev_device_write_flush(struct serdev_device *);
 int serdev_device_write_room(struct serdev_device *);
 
@@ -244,7 +248,7 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev
 }
 static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
 static inline int serdev_device_write_buf(struct serdev_device *serdev,
-					  const unsigned char *buf,
+					  const u8 *buf,
 					  size_t count)
 {
 	return -ENODEV;
@@ -262,8 +266,9 @@ static inline int serdev_device_break_ctl(struct serdev_device *serdev, int brea
 {
 	return -EOPNOTSUPP;
 }
-static inline int serdev_device_write(struct serdev_device *sdev, const unsigned char *buf,
-				      size_t count, unsigned long timeout)
+static inline ssize_t serdev_device_write(struct serdev_device *sdev,
+					  const u8 *buf, size_t count,
+					  unsigned long timeout)
 {
 	return -ENODEV;
 }
@@ -311,11 +316,13 @@ struct tty_driver;
 
 #ifdef CONFIG_SERIAL_DEV_CTRL_TTYPORT
 struct device *serdev_tty_port_register(struct tty_port *port,
+					struct device *host,
 					struct device *parent,
 					struct tty_driver *drv, int idx);
 int serdev_tty_port_unregister(struct tty_port *port);
 #else
 static inline struct device *serdev_tty_port_register(struct tty_port *port,
+					   struct device *host,
 					   struct device *parent,
 					   struct tty_driver *drv, int idx)
 {
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 89f7b6c63598..536b2581d3e2 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -852,9 +852,9 @@ static inline unsigned long uart_fifo_timeout(struct uart_port *port)
 }
 
 /* Base timer interval for polling */
-static inline int uart_poll_timeout(struct uart_port *port)
+static inline unsigned long uart_poll_timeout(struct uart_port *port)
 {
-	int timeout = uart_fifo_timeout(port);
+	unsigned long timeout = uart_fifo_timeout(port);
 
 	return timeout > 6 ? (timeout / 2 - 2) : 1;
 }
diff --git a/include/linux/tty.h b/include/linux/tty.h
index d219a11e3fe0..8c76fd97d4ad 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -242,7 +242,7 @@ struct tty_struct {
 	void *driver_data;
 	spinlock_t files_lock;
 	int write_cnt;
-	unsigned char *write_buf;
+	u8 *write_buf;
 
 	struct list_head tty_files;
 
@@ -393,8 +393,10 @@ extern const struct class tty_class;
  * tty_kref_get - get a tty reference
  * @tty: tty device
  *
- * Returns: a new reference to a tty object. The caller must hold sufficient
- * locks/counts to ensure that their existing reference cannot go away
+ * Returns: a new reference to a tty object
+ *
+ * Locking: The caller must hold sufficient locks/counts to ensure that their
+ * existing reference cannot go away.
  */
 static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
 {
@@ -408,8 +410,8 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout);
 void stop_tty(struct tty_struct *tty);
 void start_tty(struct tty_struct *tty);
 void tty_write_message(struct tty_struct *tty, char *msg);
-int tty_send_xchar(struct tty_struct *tty, char ch);
-int tty_put_char(struct tty_struct *tty, unsigned char c);
+int tty_send_xchar(struct tty_struct *tty, u8 ch);
+int tty_put_char(struct tty_struct *tty, u8 c);
 unsigned int tty_chars_in_buffer(struct tty_struct *tty);
 unsigned int tty_write_room(struct tty_struct *tty);
 void tty_driver_flush_buffer(struct tty_struct *tty);
@@ -437,12 +439,11 @@ void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud,
  * tty_get_baud_rate - get tty bit rates
  * @tty: tty to query
  *
- * Returns: the baud rate as an integer for this terminal. The termios lock
- * must be held by the caller and the terminal bit flags may be updated.
+ * Returns: the baud rate as an integer for this terminal
  *
- * Locking: none
+ * Locking: The termios lock must be held by the caller.
  */
-static inline speed_t tty_get_baud_rate(struct tty_struct *tty)
+static inline speed_t tty_get_baud_rate(const struct tty_struct *tty)
 {
 	return tty_termios_baud_rate(&tty->termios);
 }
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 18beff0cec1a..7372124fbf90 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -72,8 +72,7 @@ struct serial_struct;
  *	is closed for the last time freeing up the resources. This is
  *	actually the second part of shutdown for routines that might sleep.
  *
- * @write: ``ssize_t ()(struct tty_struct *tty, const unsigned char *buf,
- *		    size_t count)``
+ * @write: ``ssize_t ()(struct tty_struct *tty, const u8 *buf, size_t count)``
  *
  *	This routine is called by the kernel to write a series (@count) of
  *	characters (@buf) to the @tty device. The characters may come from
@@ -85,7 +84,7 @@ struct serial_struct;
  *
  *	Optional: Required for writable devices. May not sleep.
  *
- * @put_char: ``int ()(struct tty_struct *tty, unsigned char ch)``
+ * @put_char: ``int ()(struct tty_struct *tty, u8 ch)``
  *
  *	This routine is called by the kernel to write a single character @ch to
  *	the @tty device. If the kernel uses this routine, it must call the
@@ -243,7 +242,7 @@ struct serial_struct;
  *	Optional: If not provided, the device is assumed to have no FIFO.
  *	Usually correct to invoke via tty_wait_until_sent(). May sleep.
  *
- * @send_xchar: ``void ()(struct tty_struct *tty, char ch)``
+ * @send_xchar: ``void ()(struct tty_struct *tty, u8 ch)``
  *
  *	This routine is used to send a high-priority XON/XOFF character (@ch)
  *	to the @tty device.
@@ -375,7 +374,7 @@ struct tty_operations {
 	void (*flush_buffer)(struct tty_struct *tty);
 	void (*set_ldisc)(struct tty_struct *tty);
 	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
-	void (*send_xchar)(struct tty_struct *tty, char ch);
+	void (*send_xchar)(struct tty_struct *tty, u8 ch);
 	int (*tiocmget)(struct tty_struct *tty);
 	int (*tiocmset)(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
diff --git a/include/linux/tty_port.h b/include/linux/tty_port.h
index 6b367eb17979..1b861f2100b6 100644
--- a/include/linux/tty_port.h
+++ b/include/linux/tty_port.h
@@ -114,8 +114,8 @@ struct tty_port {
 	unsigned char		console:1;
 	struct mutex		mutex;
 	struct mutex		buf_mutex;
-	unsigned char		*xmit_buf;
-	DECLARE_KFIFO_PTR(xmit_fifo, unsigned char);
+	u8			*xmit_buf;
+	DECLARE_KFIFO_PTR(xmit_fifo, u8);
 	unsigned int		close_delay;
 	unsigned int		closing_wait;
 	int			drain_delay;
@@ -149,10 +149,10 @@ struct device *tty_port_register_device_attr(struct tty_port *port,
 		const struct attribute_group **attr_grp);
 struct device *tty_port_register_device_serdev(struct tty_port *port,
 		struct tty_driver *driver, unsigned index,
-		struct device *device);
+		struct device *host, struct device *parent);
 struct device *tty_port_register_device_attr_serdev(struct tty_port *port,
 		struct tty_driver *driver, unsigned index,
-		struct device *device, void *drvdata,
+		struct device *host, struct device *parent, void *drvdata,
 		const struct attribute_group **attr_grp);
 void tty_port_unregister_device(struct tty_port *port,
 		struct tty_driver *driver, unsigned index);
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
deleted file mode 100644
index d2e2785af602..000000000000
--- a/include/linux/virtio_console.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers:
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
- * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
- */
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-
-#include <uapi/linux/virtio_console.h>
-
-int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
index 53bc1af67a41..9086367db043 100644
--- a/include/uapi/linux/serial.h
+++ b/include/uapi/linux/serial.h
@@ -11,6 +11,7 @@
 #ifndef _UAPI_LINUX_SERIAL_H
 #define _UAPI_LINUX_SERIAL_H
 
+#include <linux/const.h>
 #include <linux/types.h>
 
 #include <linux/tty_flags.h>
@@ -137,17 +138,19 @@ struct serial_icounter_struct {
  * * %SER_RS485_ADDRB		- Enable RS485 addressing mode.
  * * %SER_RS485_ADDR_RECV - Receive address filter (enables @addr_recv). Requires %SER_RS485_ADDRB.
  * * %SER_RS485_ADDR_DEST - Destination address (enables @addr_dest). Requires %SER_RS485_ADDRB.
+ * * %SER_RS485_MODE_RS422	- Enable RS422. Requires %SER_RS485_ENABLED.
  */
 struct serial_rs485 {
 	__u32	flags;
-#define SER_RS485_ENABLED		(1 << 0)
-#define SER_RS485_RTS_ON_SEND		(1 << 1)
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)
-#define SER_RS485_RX_DURING_TX		(1 << 4)
-#define SER_RS485_TERMINATE_BUS		(1 << 5)
-#define SER_RS485_ADDRB			(1 << 6)
-#define SER_RS485_ADDR_RECV		(1 << 7)
-#define SER_RS485_ADDR_DEST		(1 << 8)
+#define SER_RS485_ENABLED		_BITUL(0)
+#define SER_RS485_RTS_ON_SEND		_BITUL(1)
+#define SER_RS485_RTS_AFTER_SEND	_BITUL(2)
+#define SER_RS485_RX_DURING_TX		_BITUL(3)
+#define SER_RS485_TERMINATE_BUS		_BITUL(4)
+#define SER_RS485_ADDRB			_BITUL(5)
+#define SER_RS485_ADDR_RECV		_BITUL(6)
+#define SER_RS485_ADDR_DEST		_BITUL(7)
+#define SER_RS485_MODE_RS422		_BITUL(8)
 
 	__u32	delay_rts_before_send;
 	__u32	delay_rts_after_send;