Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 122 insertions, 25 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 2b691161830f..dad8c8f8581f 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -296,13 +296,14 @@
  *	to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
- *	attributes determining the channel width; this is used for setting
- *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
- *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- *	instead, the support here is for backward compatibility only.
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
+ *	channel width; this is used for setting monitor mode channel),
+ *	%NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
+ *	%NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
+ *	%NL80211_ATTR_WIPHY_RTS_THRESHOLD.  However, for setting the channel,
+ *	see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
+ *	compatibility only.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -351,7 +352,8 @@
  *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *	The channel to use can be set on the interface or be given using the
- *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
+ *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
+ *	attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
  * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
  * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
@@ -536,11 +538,12 @@
  *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
- *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
- *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- *	to be added to the frame.
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
+ *	authentication type. %NL80211_ATTR_IE is used to define IEs
+ *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
+ *	to the frame.
  *	When used as an event, this reports reception of an Authentication
  *	frame in station and IBSS modes when the local MLME processed the
  *	frame, i.e., it was for the local STA and was received in correct
@@ -595,8 +598,9 @@
  *	requests to connect to a specified network but without separating
  *	auth and assoc steps. For this, you need to specify the SSID in a
  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
- *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
+ *	%NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
  *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
  *	%NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
@@ -687,6 +691,10 @@
  *	four bytes for vendor frames including the OUI. The registration
  *	cannot be dropped, but is removed automatically when the netlink
  *	socket is closed. Multiple registrations can be made.
+ *	The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
+ *	%NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
+ *	case the registration can also be modified to include/exclude the
+ *	flag, rather than requiring unregistration to change it.
  * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
  *	backward compatibility
  * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
@@ -1151,6 +1159,17 @@
  * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
  *	is passed using %NL80211_ATTR_TID_CONFIG attribute.
  *
+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
+ *	frame. This event is used to indicate that a received Beacon frame was
+ *	dropped because it did not include a valid MME MIC while beacon
+ *	protection was enabled (BIGTK configured in station mode).
+ *
+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
+ *	port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
+ *	%NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
+ *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+ *	if the recipient acknowledged the frame.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1377,6 +1396,10 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_TID_CONFIG,
 
+	NL80211_CMD_UNPROT_BEACON,
+
+	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1422,7 +1445,8 @@ enum nl80211_commands {
  *	of &enum nl80211_chan_width, describing the channel width. See the
  *	documentation of the enum for more information.
  * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- *	channel, used for anything but 20 MHz bandwidth
+ *	channel, used for anything but 20 MHz bandwidth. In S1G this is the
+ *	operating channel center frequency.
  * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
  *	channel, used only for 80+80 MHz bandwidth
  * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
@@ -2469,6 +2493,17 @@ enum nl80211_commands {
  *	entry without having to force a disconnection after the PMK timeout. If
  *	no roaming occurs between the reauth threshold and PMK expiration,
  *	disassociation is still forced.
+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
+ *	%NL80211_CMD_REGISTER_FRAME command, see the description there.
+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
+ *	%NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
+ *	an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
+ *	first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
+ *
+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
+ *	association request when used with NL80211_CMD_NEW_STATION).
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2945,6 +2980,13 @@ enum nl80211_attrs {
 	NL80211_ATTR_PMK_LIFETIME,
 	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
 
+	NL80211_ATTR_RECEIVE_MULTICAST,
+	NL80211_ATTR_WIPHY_FREQ_OFFSET,
+	NL80211_ATTR_CENTER_FREQ1_OFFSET,
+	NL80211_ATTR_SCAN_FREQ_KHZ,
+
+	NL80211_ATTR_HE_6GHZ_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3523,6 +3565,8 @@ enum nl80211_mpath_info {
  *     defined in HE capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
  *     defined
+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
+ *	given for all 6 GHz band channels
  * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_band_iftype_attr {
@@ -3533,6 +3577,7 @@ enum nl80211_band_iftype_attr {
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
+	NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
 
 	/* keep last */
 	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
@@ -3666,6 +3711,7 @@ enum nl80211_wmm_rule {
  *	(see &enum nl80211_wmm_rule)
  * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
  *	in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3696,6 +3742,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
 	NL80211_FREQUENCY_ATTR_WMM,
 	NL80211_FREQUENCY_ATTR_NO_HE,
+	NL80211_FREQUENCY_ATTR_OFFSET,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4466,6 +4513,7 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
  *	Contains a nested array of signal strength attributes (u8, dBm),
  *	using the nesting index as the antenna number.
+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -4490,6 +4538,7 @@ enum nl80211_bss {
 	NL80211_BSS_PARENT_TSF,
 	NL80211_BSS_PARENT_BSSID,
 	NL80211_BSS_CHAIN_SIGNAL,
+	NL80211_BSS_FREQUENCY_OFFSET,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -4800,6 +4849,17 @@ enum nl80211_tid_config {
 	NL80211_TID_CONFIG_DISABLE,
 };
 
+/* enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+	NL80211_TX_RATE_AUTOMATIC,
+	NL80211_TX_RATE_LIMITED,
+	NL80211_TX_RATE_FIXED,
+};
+
 /* enum nl80211_tid_config_attr - TID specific configuration.
  * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
  * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
@@ -4807,12 +4867,10 @@ enum nl80211_tid_config {
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer
- *	is selected, if set indicates that the new configuration overrides
- *	all previous peer configurations, otherwise previous peer specific
- *	configurations should be left untouched. If peer is selected then
- *	it will reset particular TID configuration of that peer and it will
- *	not accept other TID config attributes along with peer.
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ *	that the new configuration overrides all previous peer
+ *	configurations, otherwise previous peer specific configurations
+ *	should be left untouched.
  * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
  *	Its type is u16.
  * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
@@ -4828,12 +4886,23 @@ enum nl80211_tid_config {
  *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
  *	the max value is advertised by the driver in this attribute on
  *	output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs
- *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using
- *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ *	Its type is u8, using the values from &nl80211_tid_config.
  * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
  *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
  *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ *	Its type is u8, using the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
+ *	to notfiy the driver that what type of txrate should be used
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
+ *	the values form &nl80211_tx_rate_setting.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
+ *	with the parameters passed through %NL80211_ATTR_TX_RATES.
+ *	configuration is applied to the data frame for the tid to that connected
+ *	station.
  */
 enum nl80211_tid_config_attr {
 	__NL80211_TID_CONFIG_ATTR_INVALID,
@@ -4847,6 +4916,9 @@ enum nl80211_tid_config_attr {
 	NL80211_TID_CONFIG_ATTR_RETRY_LONG,
 	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
 	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
+	NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
+	NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
+	NL80211_TID_CONFIG_ATTR_TX_RATE,
 
 	/* keep last */
 	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
@@ -5324,6 +5396,8 @@ enum plink_actions {
 
 #define NL80211_KCK_LEN			16
 #define NL80211_KEK_LEN			16
+#define NL80211_KCK_EXT_LEN		24
+#define NL80211_KEK_EXT_LEN		32
 #define NL80211_REPLAY_CTR_LEN		8
 
 /**
@@ -5332,6 +5406,7 @@ enum plink_actions {
  * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
  * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
  * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
  * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
  * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
  */
@@ -5340,6 +5415,7 @@ enum nl80211_rekey_data {
 	NL80211_REKEY_DATA_KEK,
 	NL80211_REKEY_DATA_KCK,
 	NL80211_REKEY_DATA_REPLAY_CTR,
+	NL80211_REKEY_DATA_AKM,
 
 	/* keep last */
 	NUM_NL80211_REKEY_DATA,
@@ -5674,6 +5750,8 @@ enum nl80211_feature_flags {
  *
  * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
  *	and can receive key configuration for BIGTK using key indexes 6 and 7.
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
+ *	protection as a client only and cannot transmit protected beacons.
  *
  * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
  *	forwarding of preauth frames over the control port. They are then
@@ -5684,6 +5762,17 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
  *      in IBSS mode, essentially by dropping their state.
  *
+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
+ *	are possible for multicast frames and those will be reported properly.
+ *
+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
+ *	reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
+ *	report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
+ *	included in the scan request.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
+ *	can report tx status for control port over nl80211 tx operations.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5735,6 +5824,10 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
 	NL80211_EXT_FEATURE_PROTECTED_TWT,
 	NL80211_EXT_FEATURE_DEL_IBSS_STA,
+	NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
+	NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
+	NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
+	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5846,6 +5939,9 @@ enum nl80211_timeout_reason {
  * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
  *	only have supported rates and no additional capabilities (unless
  *	added by userspace explicitly.)
+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
+ *	%NL80211_ATTR_SCAN_FREQ_KHZ. This also means
+ *	%NL80211_ATTR_SCAN_FREQUENCIES will not be included.
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -5861,6 +5957,7 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
 	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
 	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
+	NL80211_SCAN_FLAG_FREQ_KHZ				= 1<<13,
 };
 
 /**