UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 1 insertions, 168 deletions

diff --git a/include/linux/scc.h b/include/linux/scc.h
index 3495bd953cc6..c5a004962679 100644
--- a/include/linux/scc.h
+++ b/include/linux/scc.h
@@ -1,175 +1,9 @@
 /* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
 #ifndef	_SCC_H
 #define	_SCC_H
 
+#include <uapi/linux/scc.h>
 
-/* selection of hardware types */
-
-#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE		0x01    /* hardware type for EAGLE card */
-#define PC100		0x02	/* hardware type for PC100 card */
-#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
-#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-	SIOCSCCRESERVED = SIOCDEVPRIVATE,
-	SIOCSCCCFG,
-	SIOCSCCINI,
-	SIOCSCCCHANINI,
-	SIOCSCCSMEM,
-	SIOCSCCGKISS,
-	SIOCSCCSKISS,
-	SIOCSCCGSTAT,
-	SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-	PARAM_DATA,
-	PARAM_TXDELAY,
-	PARAM_PERSIST,
-	PARAM_SLOTTIME,
-	PARAM_TXTAIL,
-	PARAM_FULLDUP,
-	PARAM_SOFTDCD,		/* was: PARAM_HW */
-	PARAM_MUTE,		/* ??? */
-	PARAM_DTR,
-	PARAM_RTS,
-	PARAM_SPEED,
-	PARAM_ENDDELAY,		/* ??? */
-	PARAM_GROUP,
-	PARAM_IDLE,
-	PARAM_MIN,
-	PARAM_MAXKEY,
-	PARAM_WAIT,
-	PARAM_MAXDEFER,
-	PARAM_TX,
-	PARAM_HWEVENT = 31,
-	PARAM_RETURN = 255	/* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-	KISS_DUPLEX_HALF,	/* normal CSMA operation */
-	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
-	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
-	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF	65535U	/* to switch off timers */
-#define NO_SUCH_PARAM	65534U	/* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-	HWEV_DCD_ON,
-	HWEV_DCD_OFF,
-	HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP		0100	/* if set, only tx when all channels clear */
-#define TXGROUP		0200	/* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-	CLK_DPLL,	/* normal halfduplex operation */
-	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
-	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
-			/* modems without clock regeneration */
-	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
-			/* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-	TXS_IDLE,	/* Transmitter off, no data pending */
-	TXS_BUSY,	/* waiting for permission to send / tailtime */
-	TXS_ACTIVE,	/* Transmitter on, sending data */
-	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
-	TXS_IDLE2,	/* Transmitter on, no data pending */
-	TXS_WAIT,	/* Waiting for Mintime to expire */
-	TXS_TIMEOUT	/* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;	/* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;		/* KISS errors */
-        
-	unsigned int nospace;	/* "Out of buffers" */
-	unsigned int rx_over;	/* Receiver Overruns */
-	unsigned int tx_under;	/* Transmitter Underruns */
-
-	unsigned int tx_state;	/* Transmitter state */
-	int tx_queued;		/* tx frames enqueued */
-
-	unsigned int maxqueue;	/* allocated tx_buffers */
-	unsigned int bufsize;	/* used buffersize */
-};
-
-struct scc_modem {
-	long speed;		/* Line speed, bps */
-	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
-	char nrz;		/* NRZ instead of NRZI */	
-};
-
-struct scc_kiss_cmd {
-	int  	 command;	/* one of the KISS-Commands defined above */
-	unsigned param;		/* KISS-Param */
-};
-
-struct scc_hw_config {
-	io_port data_a;		/* data port channel A */
-	io_port ctrl_a;		/* control port channel A */
-	io_port data_b;		/* data port channel B */
-	io_port ctrl_b;		/* control port channel B */
-	io_port vector_latch;	/* INTACK-Latch (#) */
-	io_port	special;	/* special function port */
-
-	int	irq;		/* irq */
-	long	clock;		/* clock */
-	char	option;		/* command for function port */
-
-	char brand;		/* hardware type */
-	char escc;		/* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-	unsigned int dummy;
-	unsigned int bufsize;
-};
-
-struct scc_calibrate {
-	unsigned int time;
-	unsigned char pattern;
-};
-
-#ifdef __KERNEL__
 
 enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
 
@@ -248,5 +82,4 @@ struct scc_channel {
 	spinlock_t	lock;		/* Channel guard lock */
 };
 
-#endif /* defined(__KERNEL__) */
 #endif /* defined(_SCC_H) */