Merge tag 'bd71847-support' into regulator-4.20

regulator/mfd: Support for the ROHM BD71847

This adds support for the BD71847 which touches both MFD and regulator.
There's a few other bits and pieces included as some dependency patches
had already been applied so would've required rebasing.

2 files changed, 22 insertions, 4 deletions

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 0fd8fbb74763..a9c030192147 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -271,9 +271,16 @@ enum regulator_type {
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
  * @min_dropout_uV: The minimum dropout voltage this regulator can handle
  * @linear_ranges: A constant table of possible voltage ranges.
- * @n_linear_ranges: Number of entries in the @linear_ranges table.
+ * @linear_range_selectors: A constant table of voltage range selectors.
+ *			    If pickable ranges are used each range must
+ *			    have corresponding selector here.
+ * @n_linear_ranges: Number of entries in the @linear_ranges (and in
+ *		     linear_range_selectors if used) table(s).
  * @volt_table: Voltage mapping table (if table based mapping)
  *
+ * @vsel_range_reg: Register for range selector when using pickable ranges
+ *		    and regulator_regmap_X_voltage_X_pickable functions.
+ * @vsel_range_mask: Mask for register bitfield used for range selector
  * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
  * @vsel_mask: Mask for register bitfield used for selector
  * @csel_reg: Register for TPS65218 LS3 current regulator
@@ -338,10 +345,14 @@ struct regulator_desc {
 	int min_dropout_uV;
 
 	const struct regulator_linear_range *linear_ranges;
+	const unsigned int *linear_range_selectors;
+
 	int n_linear_ranges;
 
 	const unsigned int *volt_table;
 
+	unsigned int vsel_range_reg;
+	unsigned int vsel_range_mask;
 	unsigned int vsel_reg;
 	unsigned int vsel_mask;
 	unsigned int csel_reg;
@@ -498,18 +509,25 @@ int regulator_mode_to_status(unsigned int);
 
 int regulator_list_voltage_linear(struct regulator_dev *rdev,
 				  unsigned int selector);
+int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
+						   unsigned int selector);
 int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
 					unsigned int selector);
 int regulator_list_voltage_table(struct regulator_dev *rdev,
 				  unsigned int selector);
 int regulator_map_voltage_linear(struct regulator_dev *rdev,
 				  int min_uV, int max_uV);
+int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
+						  int min_uV, int max_uV);
 int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 				       int min_uV, int max_uV);
 int regulator_map_voltage_iterate(struct regulator_dev *rdev,
 				  int min_uV, int max_uV);
 int regulator_map_voltage_ascend(struct regulator_dev *rdev,
 				  int min_uV, int max_uV);
+int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
+						unsigned int sel);
 int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev);
 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
 int regulator_is_enabled_regmap(struct regulator_dev *rdev);
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 3468703d663a..a459a5e973a7 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -48,9 +48,9 @@ struct regulator;
  * DISABLE_IN_SUSPEND	- turn off regulator in suspend states
  * ENABLE_IN_SUSPEND	- keep regulator on in suspend states
  */
-#define DO_NOTHING_IN_SUSPEND	(-1)
-#define DISABLE_IN_SUSPEND	0
-#define ENABLE_IN_SUSPEND	1
+#define DO_NOTHING_IN_SUSPEND	0
+#define DISABLE_IN_SUSPEND	1
+#define ENABLE_IN_SUSPEND	2
 
 /* Regulator active discharge flags */
 enum regulator_active_discharge {