Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...

1 files changed, 139 insertions, 0 deletions

diff --git a/include/linux/qed/qed_ll2_if.h b/include/linux/qed/qed_ll2_if.h
new file mode 100644
index 000000000000..fd75c265dba3
--- /dev/null
+++ b/include/linux/qed/qed_ll2_if.h
@@ -0,0 +1,139 @@
+/* QLogic qed NIC Driver
+ *
+ * Copyright (c) 2015 QLogic Corporation
+ *
+ * This software is available under the terms of the GNU General Public License
+ * (GPL) Version 2, available from the file COPYING in the main directory of
+ * this source tree.
+ */
+
+#ifndef _QED_LL2_IF_H
+#define _QED_LL2_IF_H
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/qed/qed_if.h>
+
+struct qed_ll2_stats {
+	u64 gsi_invalid_hdr;
+	u64 gsi_invalid_pkt_length;
+	u64 gsi_unsupported_pkt_typ;
+	u64 gsi_crcchksm_error;
+
+	u64 packet_too_big_discard;
+	u64 no_buff_discard;
+
+	u64 rcv_ucast_bytes;
+	u64 rcv_mcast_bytes;
+	u64 rcv_bcast_bytes;
+	u64 rcv_ucast_pkts;
+	u64 rcv_mcast_pkts;
+	u64 rcv_bcast_pkts;
+
+	u64 sent_ucast_bytes;
+	u64 sent_mcast_bytes;
+	u64 sent_bcast_bytes;
+	u64 sent_ucast_pkts;
+	u64 sent_mcast_pkts;
+	u64 sent_bcast_pkts;
+};
+
+#define QED_LL2_UNUSED_HANDLE   (0xff)
+
+struct qed_ll2_cb_ops {
+	int (*rx_cb)(void *, struct sk_buff *, u32, u32);
+	int (*tx_cb)(void *, struct sk_buff *, bool);
+};
+
+struct qed_ll2_params {
+	u16 mtu;
+	bool drop_ttl0_packets;
+	bool rx_vlan_stripping;
+	u8 tx_tc;
+	bool frags_mapped;
+	u8 ll2_mac_address[ETH_ALEN];
+};
+
+struct qed_ll2_ops {
+/**
+ * @brief start - initializes ll2
+ *
+ * @param cdev
+ * @param params - protocol driver configuration for the ll2.
+ *
+ * @return 0 on success, otherwise error value.
+ */
+	int (*start)(struct qed_dev *cdev, struct qed_ll2_params *params);
+
+/**
+ * @brief stop - stops the ll2
+ *
+ * @param cdev
+ *
+ * @return 0 on success, otherwise error value.
+ */
+	int (*stop)(struct qed_dev *cdev);
+
+/**
+ * @brief start_xmit - transmits an skb over the ll2 interface
+ *
+ * @param cdev
+ * @param skb
+ *
+ * @return 0 on success, otherwise error value.
+ */
+	int (*start_xmit)(struct qed_dev *cdev, struct sk_buff *skb);
+
+/**
+ * @brief register_cb_ops - protocol driver register the callback for Rx/Tx
+ * packets. Should be called before `start'.
+ *
+ * @param cdev
+ * @param cookie - to be passed to the callback functions.
+ * @param ops - the callback functions to register for Rx / Tx.
+ *
+ * @return 0 on success, otherwise error value.
+ */
+	void (*register_cb_ops)(struct qed_dev *cdev,
+				const struct qed_ll2_cb_ops *ops,
+				void *cookie);
+
+/**
+ * @brief get LL2 related statistics
+ *
+ * @param cdev
+ * @param stats - pointer to struct that would be filled with stats
+ *
+ * @return 0 on success, error otherwise.
+ */
+	int (*get_stats)(struct qed_dev *cdev, struct qed_ll2_stats *stats);
+};
+
+#ifdef CONFIG_QED_LL2
+int qed_ll2_alloc_if(struct qed_dev *);
+void qed_ll2_dealloc_if(struct qed_dev *);
+#else
+static const struct qed_ll2_ops qed_ll2_ops_pass = {
+	.start = NULL,
+	.stop = NULL,
+	.start_xmit = NULL,
+	.register_cb_ops = NULL,
+	.get_stats = NULL,
+};
+
+static inline int qed_ll2_alloc_if(struct qed_dev *cdev)
+{
+	return 0;
+}
+
+static inline void qed_ll2_dealloc_if(struct qed_dev *cdev)
+{
+}
+#endif
+#endif