Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 111 insertions, 3 deletions

diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index c773eeb92d04..4e5696cfade7 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -6,13 +6,18 @@
 #define _LINUX_PSE_CONTROLLER_H
 
 #include <linux/list.h>
+#include <linux/netlink.h>
+#include <linux/kfifo.h>
 #include <uapi/linux/ethtool.h>
+#include <uapi/linux/ethtool_netlink_generated.h>
+#include <linux/regulator/driver.h>
 
 /* Maximum current in uA according to IEEE 802.3-2022 Table 145-1 */
 #define MAX_PI_CURRENT 1920000
 /* Maximum power in mW according to IEEE 802.3-2022 Table 145-16 */
 #define MAX_PI_PW 99900
 
+struct net_device;
 struct phy_device;
 struct pse_controller_dev;
 struct netlink_ext_ack;
@@ -38,6 +43,19 @@ struct ethtool_c33_pse_pw_limit_range {
 };
 
 /**
+ * struct pse_irq_desc - notification sender description for IRQ based events.
+ *
+ * @name: the visible name for the IRQ
+ * @map_event: driver callback to map IRQ status into PSE devices with events.
+ */
+struct pse_irq_desc {
+	const char *name;
+	int (*map_event)(int irq, struct pse_controller_dev *pcdev,
+			 unsigned long *notifs,
+			 unsigned long *notifs_mask);
+};
+
+/**
  * struct pse_control_config - PSE control/channel configuration.
  *
  * @podl_admin_control: set PoDL PSE admin control as described in
@@ -98,6 +116,7 @@ struct pse_pw_limit_ranges {
 /**
  * struct ethtool_pse_control_status - PSE control/channel status.
  *
+ * @pw_d_id: PSE power domain index.
  * @podl_admin_state: operational state of the PoDL PSE
  *	functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
  * @podl_pw_status: power detection status of the PoDL PSE.
@@ -117,8 +136,12 @@ struct pse_pw_limit_ranges {
  *	is in charge of the memory allocation
  * @c33_pw_limit_nb_ranges: number of supported power limit configuration
  *	ranges
+ * @prio_max: max priority allowed for the c33_prio variable value.
+ * @prio: priority of the PSE. Managed by PSE core in case of static budget
+ *	evaluation strategy.
  */
 struct ethtool_pse_control_status {
+	u32 pw_d_id;
 	enum ethtool_podl_pse_admin_state podl_admin_state;
 	enum ethtool_podl_pse_pw_d_status podl_pw_status;
 	enum ethtool_c33_pse_admin_state c33_admin_state;
@@ -129,12 +152,20 @@ struct ethtool_pse_control_status {
 	u32 c33_avail_pw_limit;
 	struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges;
 	u32 c33_pw_limit_nb_ranges;
+	u32 prio_max;
+	u32 prio;
 };
 
 /**
  * struct pse_controller_ops - PSE controller driver callbacks
  *
- * @setup_pi_matrix: setup PI matrix of the PSE controller
+ * @setup_pi_matrix: Setup PI matrix of the PSE controller.
+ *		     The PSE PIs devicetree nodes have already been parsed by
+ *		     of_load_pse_pis() and the pcdev->pi[x]->pairset[y].np
+ *		     populated. This callback should establish the
+ *		     relationship between the PSE controller hardware ports
+ *		     and the PSE Power Interfaces, either through software
+ *		     mapping or hardware configuration.
  * @pi_get_admin_state: Get the operational state of the PSE PI. This ops
  *			is mandatory.
  * @pi_get_pw_status: Get the power detection status of the PSE PI. This
@@ -152,6 +183,11 @@ struct ethtool_pse_control_status {
  *			    range. The driver is in charge of the memory
  *			    allocation and should return the number of
  *			    ranges.
+ * @pi_get_prio: Get the PSE PI priority.
+ * @pi_set_prio: Configure the PSE PI priority.
+ * @pi_get_pw_req: Get the power requested by a PD before enabling the PSE PI.
+ *		   This is only relevant when an interrupt is registered using
+ *		   devm_pse_irq_helper helper.
  */
 struct pse_controller_ops {
 	int (*setup_pi_matrix)(struct pse_controller_dev *pcdev);
@@ -172,6 +208,10 @@ struct pse_controller_ops {
 			       int id, int max_mW);
 	int (*pi_get_pw_limit_ranges)(struct pse_controller_dev *pcdev, int id,
 				      struct pse_pw_limit_ranges *pw_limit_ranges);
+	int (*pi_get_prio)(struct pse_controller_dev *pcdev, int id);
+	int (*pi_set_prio)(struct pse_controller_dev *pcdev, int id,
+			   unsigned int prio);
+	int (*pi_get_pw_req)(struct pse_controller_dev *pcdev, int id);
 };
 
 struct module;
@@ -206,12 +246,35 @@ struct pse_pi_pairset {
  * @np: device node pointer of the PSE PI node
  * @rdev: regulator represented by the PSE PI
  * @admin_state_enabled: PI enabled state
+ * @pw_d: Power domain of the PSE PI
+ * @prio: Priority of the PSE PI. Used in static budget evaluation strategy
+ * @isr_pd_detected: PSE PI detection status managed by the interruption
+ *		     handler. This variable is relevant when the power enabled
+ *		     management is managed in software like the static
+ *		     budget evaluation strategy.
+ * @pw_allocated_mW: Power allocated to a PSE PI to manage power budget in
+ *		     static budget evaluation strategy.
  */
 struct pse_pi {
 	struct pse_pi_pairset pairset[2];
 	struct device_node *np;
 	struct regulator_dev *rdev;
 	bool admin_state_enabled;
+	struct pse_power_domain *pw_d;
+	int prio;
+	bool isr_pd_detected;
+	int pw_allocated_mW;
+};
+
+/**
+ * struct pse_ntf - PSE notification element
+ *
+ * @id: ID of the PSE control
+ * @notifs: PSE notifications to be reported
+ */
+struct pse_ntf {
+	int id;
+	unsigned long notifs;
 };
 
 /**
@@ -228,6 +291,13 @@ struct pse_pi {
  * @types: types of the PSE controller
  * @pi: table of PSE PIs described in this controller device
  * @no_of_pse_pi: flag set if the pse_pis devicetree node is not used
+ * @irq: PSE interrupt
+ * @pis_prio_max: Maximum value allowed for the PSE PIs priority
+ * @supp_budget_eval_strategies: budget evaluation strategies supported
+ *				 by the PSE
+ * @ntf_work: workqueue for PSE notification management
+ * @ntf_fifo: PSE notifications FIFO
+ * @ntf_fifo_lock: protect @ntf_fifo writer
  */
 struct pse_controller_dev {
 	const struct pse_controller_ops *ops;
@@ -241,6 +311,30 @@ struct pse_controller_dev {
 	enum ethtool_pse_types types;
 	struct pse_pi *pi;
 	bool no_of_pse_pi;
+	int irq;
+	unsigned int pis_prio_max;
+	u32 supp_budget_eval_strategies;
+	struct work_struct ntf_work;
+	DECLARE_KFIFO_PTR(ntf_fifo, struct pse_ntf);
+	spinlock_t ntf_fifo_lock; /* Protect @ntf_fifo writer */
+};
+
+/**
+ * enum pse_budget_eval_strategies - PSE budget evaluation strategies.
+ * @PSE_BUDGET_EVAL_STRAT_DISABLED: Budget evaluation strategy disabled.
+ * @PSE_BUDGET_EVAL_STRAT_STATIC: PSE static budget evaluation strategy.
+ *	Budget evaluation strategy based on the power requested during PD
+ *	classification. This strategy is managed by the PSE core.
+ * @PSE_BUDGET_EVAL_STRAT_DYNAMIC: PSE dynamic budget evaluation
+ *	strategy. Budget evaluation strategy based on the current consumption
+ *	per ports compared to the total	power budget. This mode is managed by
+ *	the PSE controller.
+ */
+
+enum pse_budget_eval_strategies {
+	PSE_BUDGET_EVAL_STRAT_DISABLED	= 1 << 0,
+	PSE_BUDGET_EVAL_STRAT_STATIC	= 1 << 1,
+	PSE_BUDGET_EVAL_STRAT_DYNAMIC	= 1 << 2,
 };
 
 #if IS_ENABLED(CONFIG_PSE_CONTROLLER)
@@ -249,8 +343,11 @@ void pse_controller_unregister(struct pse_controller_dev *pcdev);
 struct device;
 int devm_pse_controller_register(struct device *dev,
 				 struct pse_controller_dev *pcdev);
+int devm_pse_irq_helper(struct pse_controller_dev *pcdev, int irq,
+			int irq_flags, const struct pse_irq_desc *d);
 
-struct pse_control *of_pse_control_get(struct device_node *node);
+struct pse_control *of_pse_control_get(struct device_node *node,
+				       struct phy_device *phydev);
 void pse_control_put(struct pse_control *psec);
 
 int pse_ethtool_get_status(struct pse_control *psec,
@@ -262,13 +359,17 @@ int pse_ethtool_set_config(struct pse_control *psec,
 int pse_ethtool_set_pw_limit(struct pse_control *psec,
 			     struct netlink_ext_ack *extack,
 			     const unsigned int pw_limit);
+int pse_ethtool_set_prio(struct pse_control *psec,
+			 struct netlink_ext_ack *extack,
+			 unsigned int prio);
 
 bool pse_has_podl(struct pse_control *psec);
 bool pse_has_c33(struct pse_control *psec);
 
 #else
 
-static inline struct pse_control *of_pse_control_get(struct device_node *node)
+static inline struct pse_control *of_pse_control_get(struct device_node *node,
+						     struct phy_device *phydev)
 {
 	return ERR_PTR(-ENOENT);
 }
@@ -298,6 +399,13 @@ static inline int pse_ethtool_set_pw_limit(struct pse_control *psec,
 	return -EOPNOTSUPP;
 }
 
+static inline int pse_ethtool_set_prio(struct pse_control *psec,
+				       struct netlink_ext_ack *extack,
+				       unsigned int prio)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline bool pse_has_podl(struct pse_control *psec)
 {
 	return false;