diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2019-10-26 23:47:32 +0200 |
---|---|---|
committer | Lee Jones <lee.jones@linaro.org> | 2019-11-11 08:45:04 +0000 |
commit | 22fb3ad0cc5f578398953ddcab9c8239a08caccd (patch) | |
tree | ad7ac7fab95c75124bc4471b735f282e3ed3b520 /include/linux/mfd/db8500-prcmu.h | |
parent | 59dbc0e0d498c8bdb26a661ee080ee8d147c3c5d (diff) | |
download | lwn-22fb3ad0cc5f578398953ddcab9c8239a08caccd.tar.gz lwn-22fb3ad0cc5f578398953ddcab9c8239a08caccd.zip |
mfd: db8500-prcmu: Support U8420-sysclk firmware
There is a distinct version of the Ux500 U8420 variant
with "sysclk", as can be seen from the vendor code that
didn't make it upstream, this firmware lacks the
ULPPLL (ultra-low power phase locked loop) which in
effect means that the timer clock is instead wired to
the 32768 Hz always-on clock.
This has some repercussions when enabling the timer
clock as the code as it stands will disable the timer
clock on these platforms (lacking the so-called
"doze mode") and obtaining the wrong rate of the timer
clock.
The timer frequency is of course needed very early in
the boot, and as a consequence, we need to shuffle
around the early PRCMU init code: whereas in the past
we did not need to look up the PRCMU firmware version
in the early init, but now we need to know the version
before the core system timers are registered so we
restructure the platform callbacks to the PRCMU so as
not to take any arguments and instead look up the
resources it needs directly from the device tree
when initializing.
As we do not yet support any platforms using this
firmware it is not a regression, but as PostmarketOS
is starting to support products with this firmware we
need to fix this up.
The low rate of 32kHz also makes the MTU timer unsuitable
as delay timer but this needs to be fixed in a separate
patch.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'include/linux/mfd/db8500-prcmu.h')
-rw-r--r-- | include/linux/mfd/db8500-prcmu.h | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 813710aa2cfd..1fc75d2b4a38 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -489,7 +489,7 @@ struct prcmu_auto_pm_config { #ifdef CONFIG_MFD_DB8500_PRCMU -void db8500_prcmu_early_init(u32 phy_base, u32 size); +void db8500_prcmu_early_init(void); int prcmu_set_rc_a2p(enum romcode_write); enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); @@ -546,7 +546,7 @@ void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value); #else /* !CONFIG_MFD_DB8500_PRCMU */ -static inline void db8500_prcmu_early_init(u32 phy_base, u32 size) {} +static inline void db8500_prcmu_early_init(void) {} static inline int prcmu_set_rc_a2p(enum romcode_write code) { |