Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Here's the main drm pull request for 4.7, it's been a busy one, and
  I've been a bit more distracted in real life this merge window.  Lots
  more ARM drivers, not sure if it'll ever end.  I think I've at least
  one more coming the next merge window.

  But changes are all over the place, support for AMD Polaris GPUs is in
  here, some missing GM108 support for nouveau (found in some Lenovos),
  a bunch of MST and skylake fixes.

  I've also noticed a few fixes from Arnd in my inbox, that I'll try and
  get in asap, but I didn't think they should hold this up.

  New drivers:
   - Hisilicon kirin display driver
   - Mediatek MT8173 display driver
   - ARC PGU - bitstreamer on Synopsys ARC SDP boards
   - Allwinner A13 initial RGB output driver
   - Analogix driver for DisplayPort IP found in exynos and rockchip

  DRM Core:
   - UAPI headers fixes and C++ safety
   - DRM connector reference counting
   - DisplayID mode parsing for Dell 5K monitors
   - Removal of struct_mutex from drivers
   - Connector registration cleanups
   - MST robustness fixes
   - MAINTAINERS updates
   - Lockless GEM object freeing
   - Generic fbdev deferred IO support

  panel:
   - Support for a bunch of new panels

  i915:
   - VBT refactoring
   - PLL computation cleanups
   - DSI support for BXT
   - Color manager support
   - More atomic patches
   - GEM improvements
   - GuC fw loading fixes
   - DP detection fixes
   - SKL GPU hang fixes
   - Lots of BXT fixes

  radeon/amdgpu:
   - Initial Polaris support
   - GPUVM/Scheduler/Clock/Power improvements
   - ASYNC pageflip support
   - New mesa feature support

  nouveau:
   - GM108 support
   - Power sensor support improvements
   - GR init + ucode fixes.
   - Use GPU provided topology information

  vmwgfx:
   - Add host messaging support

  gma500:
   - Some cleanups and fixes

  atmel:
   - Bridge support
   - Async atomic commit support

  fsl-dcu:
   - Timing controller for LCD support
   - Pixel clock polarity support

  rcar-du:
   - Misc fixes

  exynos:
   - Pipeline clock support
   - Exynoss4533 SoC support
   - HW trigger mode support
   - export HDMI_PHY clock
   - DECON5433 fixes
   - Use generic prime functions
   - use DMA mapping APIs

  rockchip:
   - Lots of little fixes

  vc4:
   - Render node support
   - Gamma ramp support
   - DPI output support

  msm:
   - Mostly cleanups and fixes
   - Conversion to generic struct fence

  etnaviv:
   - Fix for prime buffer handling
   - Allow hangcheck to be coalesced with other wakeups

  tegra:
   - Gamme table size fix"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
  drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
  drm/edid: move displayid validation to it's own function.
  drm/displayid: Iterate over all DisplayID blocks
  drm/edid: move displayid tiled block parsing into separate function.
  drm: Nuke ->vblank_disable_allowed
  drm/vmwgfx: Report vmwgfx version to vmware.log
  drm/vmwgfx: Add VMWare host messaging capability
  drm/vmwgfx: Kill some lockdep warnings
  drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
  drm/nouveau/core: recognise GM108 chipsets
  drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
  drm/nouveau/gr/gk104-: share implementation of ppc exception init
  drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
  drm/nouveau/bios/pll: check BIT table version before trying to parse it
  drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
  drm/nouveau/volt/gk104: round up in gk104_volt_set
  drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
  drm/nouveau/fb/gf100-: allocate mmu debug buffers
  drm/nouveau/fb: allow chipset-specific actions for oneinit()
  ...

1 files changed, 93 insertions, 23 deletions

diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index e0170bf80bb0..d1559cd04e3d 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -45,20 +45,12 @@ struct drm_clip_rect;
 struct device_node;
 struct fence;
 
-#define DRM_MODE_OBJECT_CRTC 0xcccccccc
-#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
-#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0
-#define DRM_MODE_OBJECT_MODE 0xdededede
-#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0
-#define DRM_MODE_OBJECT_FB 0xfbfbfbfb
-#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
-#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
-#define DRM_MODE_OBJECT_ANY 0
-
 struct drm_mode_object {
 	uint32_t id;
 	uint32_t type;
 	struct drm_object_properties *properties;
+	struct kref refcount;
+	void (*free_cb)(struct kref *kref);
 };
 
 #define DRM_OBJECT_MAX_PROPERTY 24
@@ -126,6 +118,14 @@ enum subpixel_order {
 #define DRM_COLOR_FORMAT_RGB444		(1<<0)
 #define DRM_COLOR_FORMAT_YCRCB444	(1<<1)
 #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
+
+#define DRM_BUS_FLAG_DE_LOW		(1<<0)
+#define DRM_BUS_FLAG_DE_HIGH		(1<<1)
+/* drive data on pos. edge */
+#define DRM_BUS_FLAG_PIXDATA_POSEDGE	(1<<2)
+/* drive data on neg. edge */
+#define DRM_BUS_FLAG_PIXDATA_NEGEDGE	(1<<3)
+
 /*
  * Describes a given display (e.g. CRT or flat panel) and its limitations.
  */
@@ -147,6 +147,7 @@ struct drm_display_info {
 
 	const u32 *bus_formats;
 	unsigned int num_bus_formats;
+	u32 bus_flags;
 
 	/* Mask of supported hdmi deep color modes */
 	u8 edid_hdmi_dc_modes;
@@ -233,8 +234,8 @@ struct drm_framebuffer {
 	 * should be deferred.  In cases like this, the driver would like to
 	 * hold a ref to the fb even though it has already been removed from
 	 * userspace perspective.
+	 * The refcount is stored inside the mode object.
 	 */
-	struct kref refcount;
 	/*
 	 * Place on the dev->mode_config.fb_list, access protected by
 	 * dev->mode_config.fb_lock.
@@ -258,7 +259,6 @@ struct drm_framebuffer {
 struct drm_property_blob {
 	struct drm_mode_object base;
 	struct drm_device *dev;
-	struct kref refcount;
 	struct list_head head_global;
 	struct list_head head_file;
 	size_t length;
@@ -1895,7 +1895,7 @@ struct drm_mode_config_funcs {
 	 * drm_atomic_helper_commit(), or one of the exported sub-functions of
 	 * it.
 	 *
-	 * Asynchronous commits (as indicated with the async parameter) must
+	 * Nonblocking commits (as indicated with the nonblock parameter) must
 	 * do any preparatory work which might result in an unsuccessful commit
 	 * in the context of this callback. The only exceptions are hardware
 	 * errors resulting in -EIO. But even in that case the driver must
@@ -1908,7 +1908,7 @@ struct drm_mode_config_funcs {
 	 * The driver must wait for any pending rendering to the new
 	 * framebuffers to complete before executing the flip. It should also
 	 * wait for any pending rendering from other drivers if the underlying
-	 * buffer is a shared dma-buf. Asynchronous commits must not wait for
+	 * buffer is a shared dma-buf. Nonblocking commits must not wait for
 	 * rendering in the context of this callback.
 	 *
 	 * An application can request to be notified when the atomic commit has
@@ -1939,7 +1939,7 @@ struct drm_mode_config_funcs {
 	 *
 	 * 0 on success or one of the below negative error codes:
 	 *
-	 *  - -EBUSY, if an asynchronous updated is requested and there is
+	 *  - -EBUSY, if a nonblocking updated is requested and there is
 	 *    an earlier updated pending. Drivers are allowed to support a queue
 	 *    of outstanding updates, but currently no driver supports that.
 	 *    Note that drivers must wait for preceding updates to complete if a
@@ -1969,7 +1969,7 @@ struct drm_mode_config_funcs {
 	 */
 	int (*atomic_commit)(struct drm_device *dev,
 			     struct drm_atomic_state *state,
-			     bool async);
+			     bool nonblock);
 
 	/**
 	 * @atomic_state_alloc:
@@ -2259,8 +2259,9 @@ static inline unsigned drm_connector_index(struct drm_connector *connector)
 	return connector->connector_id;
 }
 
-/* helper to unplug all connectors from sysfs for device */
-extern void drm_connector_unplug_all(struct drm_device *dev);
+/* helpers to {un}register all connectors from sysfs for device */
+extern int drm_connector_register_all(struct drm_device *dev);
+extern void drm_connector_unregister_all(struct drm_device *dev);
 
 extern int drm_bridge_add(struct drm_bridge *bridge);
 extern void drm_bridge_remove(struct drm_bridge *bridge);
@@ -2386,8 +2387,6 @@ extern int drm_framebuffer_init(struct drm_device *dev,
 				const struct drm_framebuffer_funcs *funcs);
 extern struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev,
 						      uint32_t id);
-extern void drm_framebuffer_unreference(struct drm_framebuffer *fb);
-extern void drm_framebuffer_reference(struct drm_framebuffer *fb);
 extern void drm_framebuffer_remove(struct drm_framebuffer *fb);
 extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb);
 extern void drm_framebuffer_unregister_private(struct drm_framebuffer *fb);
@@ -2445,6 +2444,8 @@ extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
 					 int gamma_size);
 extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
 		uint32_t id, uint32_t type);
+void drm_mode_object_reference(struct drm_mode_object *obj);
+void drm_mode_object_unreference(struct drm_mode_object *obj);
 
 /* IOCTLs */
 extern int drm_mode_getresources(struct drm_device *dev,
@@ -2510,6 +2511,8 @@ extern int drm_edid_header_is_valid(const u8 *raw_edid);
 extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
 				 bool *edid_corrupt);
 extern bool drm_edid_is_valid(struct edid *edid);
+extern void drm_edid_get_monitor_name(struct edid *edid, char *name,
+				      int buflen);
 
 extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
 							 char topology[8]);
@@ -2577,7 +2580,15 @@ static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev,
 	return mo ? obj_to_encoder(mo) : NULL;
 }
 
-static inline struct drm_connector *drm_connector_find(struct drm_device *dev,
+/**
+ * drm_connector_lookup - lookup connector object
+ * @dev: DRM device
+ * @id: connector object id
+ *
+ * This function looks up the connector object specified by id
+ * add takes a reference to it.
+ */
+static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
 		uint32_t id)
 {
 	struct drm_mode_object *mo;
@@ -2600,14 +2611,73 @@ static inline struct drm_property *drm_property_find(struct drm_device *dev,
 static inline uint32_t drm_color_lut_extract(uint32_t user_input,
 					     uint32_t bit_precision)
 {
-	uint32_t val = user_input + (1 << (16 - bit_precision - 1));
+	uint32_t val = user_input;
 	uint32_t max = 0xffff >> (16 - bit_precision);
 
-	val >>= 16 - bit_precision;
+	/* Round only if we're not using full precision. */
+	if (bit_precision < 16) {
+		val += 1UL << (16 - bit_precision - 1);
+		val >>= 16 - bit_precision;
+	}
 
 	return clamp_val(val, 0, max);
 }
 
+/**
+ * drm_framebuffer_reference - incr the fb refcnt
+ * @fb: framebuffer
+ *
+ * This functions increments the fb's refcount.
+ */
+static inline void drm_framebuffer_reference(struct drm_framebuffer *fb)
+{
+	drm_mode_object_reference(&fb->base);
+}
+
+/**
+ * drm_framebuffer_unreference - unref a framebuffer
+ * @fb: framebuffer to unref
+ *
+ * This functions decrements the fb's refcount and frees it if it drops to zero.
+ */
+static inline void drm_framebuffer_unreference(struct drm_framebuffer *fb)
+{
+	drm_mode_object_unreference(&fb->base);
+}
+
+/**
+ * drm_framebuffer_read_refcount - read the framebuffer reference count.
+ * @fb: framebuffer
+ *
+ * This functions returns the framebuffer's reference count.
+ */
+static inline uint32_t drm_framebuffer_read_refcount(struct drm_framebuffer *fb)
+{
+	return atomic_read(&fb->base.refcount.refcount);
+}
+
+/**
+ * drm_connector_reference - incr the connector refcnt
+ * @connector: connector
+ *
+ * This function increments the connector's refcount.
+ */
+static inline void drm_connector_reference(struct drm_connector *connector)
+{
+	drm_mode_object_reference(&connector->base);
+}
+
+/**
+ * drm_connector_unreference - unref a connector
+ * @connector: connector to unref
+ *
+ * This function decrements the connector's refcount and frees it if it drops to zero.
+ */
+static inline void drm_connector_unreference(struct drm_connector *connector)
+{
+	drm_mode_object_unreference(&connector->base);
+}
+
 /* Plane list iterator for legacy (overlay only) planes. */
 #define drm_for_each_legacy_plane(plane, dev) \
 	list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \