Base Au1200 2.6 support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

6 files changed, 1066 insertions, 77 deletions

diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index b1e57d783604..404856e6b82d 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -177,6 +177,8 @@
 #define  MACH_MTX1		7       /* 4G MTX-1 Au1500-based board */
 #define  MACH_PB1550		8       /* Au1550-based eval board */
 #define  MACH_DB1550		9       /* Au1550-based eval board */
+#define  MACH_PB1200		10       /* Au1200-based eval board */
+#define  MACH_DB1200		11       /* Au1200-based eval board */
 
 /*
  * Valid machtype for group NEC_VR41XX
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index c60281799801..8e167bfd40b1 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -182,7 +182,8 @@
 #define CPU_VR4133		56
 #define CPU_AU1550		57
 #define CPU_24K			58
-#define CPU_LAST		58
+#define CPU_AU1200		59
+#define CPU_LAST		59
 
 /*
  * ISA Level encodings
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 148bae2fa7d3..28b04a5f67cf 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -162,27 +162,355 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
 #endif
 
-/* SDRAM Controller */
+/*
+ * SDRAM Register Offsets
+ */
 #if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0                0xB4000000
-#define MEM_SDMODE1                0xB4000004
-#define MEM_SDMODE2                0xB4000008
+#define MEM_SDMODE0		(0x0000)
+#define MEM_SDMODE1		(0x0004)
+#define MEM_SDMODE2		(0x0008)
+#define MEM_SDADDR0		(0x000C)
+#define MEM_SDADDR1		(0x0010)
+#define MEM_SDADDR2		(0x0014)
+#define MEM_SDREFCFG	(0x0018)
+#define MEM_SDPRECMD	(0x001C)
+#define MEM_SDAUTOREF	(0x0020)
+#define MEM_SDWRMD0		(0x0024)
+#define MEM_SDWRMD1		(0x0028)
+#define MEM_SDWRMD2		(0x002C)
+#define MEM_SDSLEEP		(0x0030)
+#define MEM_SDSMCKE		(0x0034)
+
+#ifndef ASSEMBLER
+/*typedef volatile struct
+{
+	uint32 sdmode0;
+	uint32 sdmode1;
+	uint32 sdmode2;
+	uint32 sdaddr0;
+	uint32 sdaddr1;
+	uint32 sdaddr2;
+	uint32 sdrefcfg;
+	uint32 sdautoref;
+	uint32 sdwrmd0;
+	uint32 sdwrmd1;
+	uint32 sdwrmd2;
+	uint32 sdsleep;
+	uint32 sdsmcke;
+
+} AU1X00_SDRAM;*/
+#endif
+
+/*
+ * MEM_SDMODE register content definitions
+ */
+#define MEM_SDMODE_F		(1<<22)
+#define MEM_SDMODE_SR		(1<<21)
+#define MEM_SDMODE_BS		(1<<20)
+#define MEM_SDMODE_RS		(3<<18)
+#define MEM_SDMODE_CS		(7<<15)
+#define MEM_SDMODE_TRAS		(15<<11)
+#define MEM_SDMODE_TMRD		(3<<9)
+#define MEM_SDMODE_TWR		(3<<7)
+#define MEM_SDMODE_TRP		(3<<5)
+#define MEM_SDMODE_TRCD		(3<<3)
+#define MEM_SDMODE_TCL		(7<<0)
+
+#define MEM_SDMODE_BS_2Bank	(0<<20)
+#define MEM_SDMODE_BS_4Bank	(1<<20)
+#define MEM_SDMODE_RS_11Row	(0<<18)
+#define MEM_SDMODE_RS_12Row	(1<<18)
+#define MEM_SDMODE_RS_13Row	(2<<18)
+#define MEM_SDMODE_RS_N(N)	((N)<<18)
+#define MEM_SDMODE_CS_7Col	(0<<15)
+#define MEM_SDMODE_CS_8Col	(1<<15)
+#define MEM_SDMODE_CS_9Col	(2<<15)
+#define MEM_SDMODE_CS_10Col	(3<<15)
+#define MEM_SDMODE_CS_11Col	(4<<15)
+#define MEM_SDMODE_CS_N(N)		((N)<<15)
+#define MEM_SDMODE_TRAS_N(N)	((N)<<11)
+#define MEM_SDMODE_TMRD_N(N)	((N)<<9)
+#define MEM_SDMODE_TWR_N(N)		((N)<<7)
+#define MEM_SDMODE_TRP_N(N)		((N)<<5)
+#define MEM_SDMODE_TRCD_N(N)	((N)<<3)
+#define MEM_SDMODE_TCL_N(N)		((N)<<0)
+
+/*
+ * MEM_SDADDR register contents definitions
+ */
+#define MEM_SDADDR_E			(1<<20)
+#define MEM_SDADDR_CSBA			(0x03FF<<10)
+#define MEM_SDADDR_CSMASK		(0x03FF<<0)
+#define MEM_SDADDR_CSBA_N(N)	((N)&(0x03FF<<22)>>12)
+#define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF<<22)>>22)
+
+/*
+ * MEM_SDREFCFG register content definitions
+ */
+#define MEM_SDREFCFG_TRC		(15<<28)
+#define MEM_SDREFCFG_TRPM		(3<<26)
+#define MEM_SDREFCFG_E			(1<<25)
+#define MEM_SDREFCFG_RE			(0x1ffffff<<0)
+#define MEM_SDREFCFG_TRC_N(N)	((N)<<MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N)	((N)<<MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N)	(N)
+#endif
 
-#define MEM_SDADDR0                0xB400000C
-#define MEM_SDADDR1                0xB4000010
-#define MEM_SDADDR2                0xB4000014
+/***********************************************************************/
 
-#define MEM_SDREFCFG               0xB4000018
-#define MEM_SDPRECMD               0xB400001C
-#define MEM_SDAUTOREF              0xB4000020
+/*
+ * Au1550 SDRAM Register Offsets
+ */
 
-#define MEM_SDWRMD0                0xB4000024
-#define MEM_SDWRMD1                0xB4000028
-#define MEM_SDWRMD2                0xB400002C
+/***********************************************************************/
 
-#define MEM_SDSLEEP                0xB4000030
-#define MEM_SDSMCKE                0xB4000034
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_SDMODE0		(0x0800)
+#define MEM_SDMODE1		(0x0808)
+#define MEM_SDMODE2		(0x0810)
+#define MEM_SDADDR0		(0x0820)
+#define MEM_SDADDR1		(0x0828)
+#define MEM_SDADDR2		(0x0830)
+#define MEM_SDCONFIGA	(0x0840)
+#define MEM_SDCONFIGB	(0x0848)
+#define MEM_SDSTAT		(0x0850)
+#define MEM_SDERRADDR	(0x0858)
+#define MEM_SDSTRIDE0	(0x0860)
+#define MEM_SDSTRIDE1	(0x0868)
+#define MEM_SDSTRIDE2	(0x0870)
+#define MEM_SDWRMD0		(0x0880)
+#define MEM_SDWRMD1		(0x0888)
+#define MEM_SDWRMD2		(0x0890)
+#define MEM_SDPRECMD	(0x08C0)
+#define MEM_SDAUTOREF	(0x08C8)
+#define MEM_SDSREF		(0x08D0)
+#define MEM_SDSLEEP		MEM_SDSREF
+
+#ifndef ASSEMBLER
+/*typedef volatile struct
+{
+	uint32 sdmode0;
+	uint32 reserved0;
+	uint32 sdmode1;
+	uint32 reserved1;
+	uint32 sdmode2;
+	uint32 reserved2[3];
+	uint32 sdaddr0;
+	uint32 reserved3;
+	uint32 sdaddr1;
+	uint32 reserved4;
+	uint32 sdaddr2;
+	uint32 reserved5[3];
+	uint32 sdconfiga;
+	uint32 reserved6;
+	uint32 sdconfigb;
+	uint32 reserved7;
+	uint32 sdstat;
+	uint32 reserved8;
+	uint32 sderraddr;
+	uint32 reserved9;
+	uint32 sdstride0;
+	uint32 reserved10;
+	uint32 sdstride1;
+	uint32 reserved11;
+	uint32 sdstride2;
+	uint32 reserved12[3];
+	uint32 sdwrmd0;
+	uint32 reserved13;
+	uint32 sdwrmd1;
+	uint32 reserved14;
+	uint32 sdwrmd2;
+	uint32 reserved15[11];
+	uint32 sdprecmd;
+	uint32 reserved16;
+	uint32 sdautoref;
+	uint32 reserved17;
+	uint32 sdsref;
+
+} AU1550_SDRAM;*/
 #endif
+#endif
+
+/*
+ * Physical base addresses for integrated peripherals
+ */
+
+#ifdef CONFIG_SOC_AU1000
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define	IRDA_PHYS_ADDR		0x10300000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MAC1_PHYS_ADDR		0x10510000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART2_PHYS_ADDR		0x11300000
+#define	UART3_PHYS_ADDR		0x11400000
+#define	SSI0_PHYS_ADDR		0x11600000
+#define	SSI1_PHYS_ADDR		0x11680000
+#define	SYS_PHYS_ADDR		0x11900000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1500
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define PCI_PHYS_ADDR		0x14005000
+#define	MAC0_PHYS_ADDR		0x11500000
+#define	MAC1_PHYS_ADDR		0x11510000
+#define	MACEN_PHYS_ADDR		0x11520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART3_PHYS_ADDR		0x11400000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define PCI_MEM_PHYS_ADDR     0x400000000
+#define PCI_IO_PHYS_ADDR      0x500000000
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1100
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define SD0_PHYS_ADDR		0x10600000
+#define SD1_PHYS_ADDR		0x10680000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define	IRDA_PHYS_ADDR		0x10300000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART3_PHYS_ADDR		0x11400000
+#define	SSI0_PHYS_ADDR		0x11600000
+#define	SSI1_PHYS_ADDR		0x11680000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define LCD_PHYS_ADDR		0x15000000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1550
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	USBH_PHYS_ADDR		0x14020000
+#define	USBD_PHYS_ADDR		0x10200000
+#define PCI_PHYS_ADDR		0x14005000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MAC1_PHYS_ADDR		0x10510000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART3_PHYS_ADDR		0x11400000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define	DDMA_PHYS_ADDR		0x14002000
+#define PE_PHYS_ADDR		0x14008000
+#define PSC0_PHYS_ADDR	 	0x11A00000
+#define PSC1_PHYS_ADDR	 	0x11B00000
+#define PSC2_PHYS_ADDR	 	0x10A00000
+#define PSC3_PHYS_ADDR	 	0x10B00000
+#define PCI_MEM_PHYS_ADDR     0x400000000
+#define PCI_IO_PHYS_ADDR      0x500000000
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1200
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define AES_PHYS_ADDR		0x10300000
+#define CIM_PHYS_ADDR		0x14004000
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define USBM_PHYS_ADDR		0x14020000
+#define	USBH_PHYS_ADDR		0x14020100
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define	DDMA_PHYS_ADDR		0x14002000
+#define PSC0_PHYS_ADDR	 	0x11A00000
+#define PSC1_PHYS_ADDR	 	0x11B00000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#define SD0_PHYS_ADDR		0x10600000
+#define SD1_PHYS_ADDR		0x10680000
+#define LCD_PHYS_ADDR		0x15000000
+#define SWCNT_PHYS_ADDR		0x1110010C
+#define MAEFE_PHYS_ADDR		0x14012000
+#define MAEBE_PHYS_ADDR		0x14010000
+#endif
+
 
 /* Static Bus Controller */
 #define MEM_STCFG0                 0xB4001000
@@ -369,7 +697,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1000_MAC0_ENABLE       0xB0520000
 #define AU1000_MAC1_ENABLE       0xB0520004
 #define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1000
+#endif /* CONFIG_SOC_AU1000 */
 
 /* Au1500 */
 #ifdef CONFIG_SOC_AU1500
@@ -440,7 +768,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1500_MAC0_ENABLE       0xB1520000
 #define AU1500_MAC1_ENABLE       0xB1520004
 #define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1500
+#endif /* CONFIG_SOC_AU1500 */
 
 /* Au1100 */
 #ifdef CONFIG_SOC_AU1100
@@ -485,6 +813,22 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1000_GPIO_13            45
 #define AU1000_GPIO_14            46
 #define AU1000_GPIO_15            47
+#define AU1000_GPIO_16            48
+#define AU1000_GPIO_17            49
+#define AU1000_GPIO_18            50
+#define AU1000_GPIO_19            51
+#define AU1000_GPIO_20            52
+#define AU1000_GPIO_21            53
+#define AU1000_GPIO_22            54
+#define AU1000_GPIO_23            55
+#define AU1000_GPIO_24            56
+#define AU1000_GPIO_25            57
+#define AU1000_GPIO_26            58
+#define AU1000_GPIO_27            59
+#define AU1000_GPIO_28            60
+#define AU1000_GPIO_29            61
+#define AU1000_GPIO_30            62
+#define AU1000_GPIO_31            63
 
 #define UART0_ADDR                0xB1100000
 #define UART1_ADDR                0xB1200000
@@ -496,7 +840,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1100_ETH0_BASE	  0xB0500000
 #define AU1100_MAC0_ENABLE       0xB0520000
 #define NUM_ETH_INTERFACES 1
-#endif // CONFIG_SOC_AU1100
+#endif /* CONFIG_SOC_AU1100 */
 
 #ifdef CONFIG_SOC_AU1550
 #define AU1550_UART0_INT          0
@@ -513,14 +857,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1550_PSC1_INT           11
 #define AU1550_PSC2_INT           12
 #define AU1550_PSC3_INT           13
-#define AU1550_TOY_INT			  14
-#define AU1550_TOY_MATCH0_INT     15
-#define AU1550_TOY_MATCH1_INT     16
-#define AU1550_TOY_MATCH2_INT     17
-#define AU1550_RTC_INT            18
-#define AU1550_RTC_MATCH0_INT     19
-#define AU1550_RTC_MATCH1_INT     20
-#define AU1550_RTC_MATCH2_INT     21
+#define AU1000_TOY_INT			  14
+#define AU1000_TOY_MATCH0_INT     15
+#define AU1000_TOY_MATCH1_INT     16
+#define AU1000_TOY_MATCH2_INT     17
+#define AU1000_RTC_INT            18
+#define AU1000_RTC_MATCH0_INT     19
+#define AU1000_RTC_MATCH1_INT     20
+#define AU1000_RTC_MATCH2_INT     21
 #define AU1550_NAND_INT           23
 #define AU1550_USB_DEV_REQ_INT    24
 #define AU1550_USB_DEV_SUS_INT    25
@@ -575,7 +919,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1550_MAC0_ENABLE       0xB0520000
 #define AU1550_MAC1_ENABLE       0xB0520004
 #define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1550
+#endif /* CONFIG_SOC_AU1550 */
 
 #ifdef CONFIG_SOC_AU1200
 #define AU1200_UART0_INT          0
@@ -592,14 +936,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1200_PSC1_INT           11
 #define AU1200_AES_INT            12
 #define AU1200_CAMERA_INT         13
-#define AU1200_TOY_INT			  14
-#define AU1200_TOY_MATCH0_INT     15
-#define AU1200_TOY_MATCH1_INT     16
-#define AU1200_TOY_MATCH2_INT     17
-#define AU1200_RTC_INT            18
-#define AU1200_RTC_MATCH0_INT     19
-#define AU1200_RTC_MATCH1_INT     20
-#define AU1200_RTC_MATCH2_INT     21
+#define AU1000_TOY_INT			  14
+#define AU1000_TOY_MATCH0_INT     15
+#define AU1000_TOY_MATCH1_INT     16
+#define AU1000_TOY_MATCH2_INT     17
+#define AU1000_RTC_INT            18
+#define AU1000_RTC_MATCH0_INT     19
+#define AU1000_RTC_MATCH1_INT     20
+#define AU1000_RTC_MATCH2_INT     21
 #define AU1200_NAND_INT           23
 #define AU1200_GPIO_204           24
 #define AU1200_GPIO_205           25
@@ -607,6 +951,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define AU1200_GPIO_207           27
 #define AU1200_GPIO_208_215       28 // Logical OR of 208:215
 #define AU1200_USB_INT            29
+#define AU1000_USB_HOST_INT		  AU1200_USB_INT
 #define AU1200_LCD_INT            30
 #define AU1200_MAE_BOTH_INT       31
 #define AU1000_GPIO_0             32
@@ -645,21 +990,36 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define UART0_ADDR                0xB1100000
 #define UART1_ADDR                0xB1200000
 
-#define USB_OHCI_BASE             0x14020000 // phys addr for ioremap
-#define USB_HOST_CONFIG           0xB4027ffc
-
-// these are here for prototyping on au1550 (do not exist on au1200)
-#define AU1200_ETH0_BASE      0xB0500000
-#define AU1200_ETH1_BASE      0xB0510000
-#define AU1200_MAC0_ENABLE       0xB0520000
-#define AU1200_MAC1_ENABLE       0xB0520004
-#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1200
+#define USB_UOC_BASE              0x14020020
+#define USB_UOC_LEN               0x20
+#define USB_OHCI_BASE             0x14020100
+#define USB_OHCI_LEN              0x100
+#define USB_EHCI_BASE             0x14020200
+#define USB_EHCI_LEN              0x100
+#define USB_UDC_BASE              0x14022000
+#define USB_UDC_LEN               0x2000
+#define USB_MSR_BASE			  0xB4020000
+#define USB_MSR_MCFG              4
+#define USBMSRMCFG_OMEMEN         0
+#define USBMSRMCFG_OBMEN          1
+#define USBMSRMCFG_EMEMEN         2
+#define USBMSRMCFG_EBMEN          3
+#define USBMSRMCFG_DMEMEN         4
+#define USBMSRMCFG_DBMEN          5
+#define USBMSRMCFG_GMEMEN         6
+#define USBMSRMCFG_OHCCLKEN       16
+#define USBMSRMCFG_EHCCLKEN       17
+#define USBMSRMCFG_UDCCLKEN       18
+#define USBMSRMCFG_PHYPLLEN       19
+#define USBMSRMCFG_RDCOMB         30
+#define USBMSRMCFG_PFEN           31
+
+#endif /* CONFIG_SOC_AU1200 */
 
 #define AU1000_LAST_INTC0_INT     31
+#define AU1000_LAST_INTC1_INT     63
 #define AU1000_MAX_INTR           63
 
-
 /* Programmable Counters 0 and 1 */
 #define SYS_BASE                   0xB1900000
 #define SYS_COUNTER_CNTRL          (SYS_BASE + 0x14)
@@ -730,6 +1090,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
   #define I2S_CONTROL_D         (1<<1)
   #define I2S_CONTROL_CE        (1<<0)
 
+#ifndef CONFIG_SOC_AU1200
+
 /* USB Host Controller */
 #define USB_OHCI_LEN              0x00100000
 
@@ -775,6 +1137,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
   #define USBDEV_ENABLE (1<<1)
   #define USBDEV_CE     (1<<0)
 
+#endif /* !CONFIG_SOC_AU1200 */
+
 /* Ethernet Controllers  */
 
 /* 4 byte offsets from AU1000_ETH_BASE */
@@ -1173,6 +1537,37 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
   #define SYS_PF_PSC1_S1		(1 << 1)
   #define SYS_PF_MUST_BE_SET		((1 << 5) | (1 << 2))
 
+/* Au1200 Only */
+#ifdef CONFIG_SOC_AU1200
+#define SYS_PINFUNC_DMA		(1<<31)
+#define SYS_PINFUNC_S0A		(1<<30)
+#define SYS_PINFUNC_S1A		(1<<29)
+#define SYS_PINFUNC_LP0		(1<<28)
+#define SYS_PINFUNC_LP1		(1<<27)
+#define SYS_PINFUNC_LD16	(1<<26)
+#define SYS_PINFUNC_LD8		(1<<25)
+#define SYS_PINFUNC_LD1		(1<<24)
+#define SYS_PINFUNC_LD0		(1<<23)
+#define SYS_PINFUNC_P1A		(3<<21)
+#define SYS_PINFUNC_P1B		(1<<20)
+#define SYS_PINFUNC_FS3		(1<<19)
+#define SYS_PINFUNC_P0A		(3<<17)
+#define SYS_PINFUNC_CS		(1<<16)
+#define SYS_PINFUNC_CIM		(1<<15)
+#define SYS_PINFUNC_P1C		(1<<14)
+#define SYS_PINFUNC_U1T		(1<<12)
+#define SYS_PINFUNC_U1R		(1<<11)
+#define SYS_PINFUNC_EX1		(1<<10)
+#define SYS_PINFUNC_EX0		(1<<9)
+#define SYS_PINFUNC_U0R		(1<<8)
+#define SYS_PINFUNC_MC		(1<<7)
+#define SYS_PINFUNC_S0B		(1<<6)
+#define SYS_PINFUNC_S0C		(1<<5)
+#define SYS_PINFUNC_P0B		(1<<4)
+#define SYS_PINFUNC_U0T		(1<<3)
+#define SYS_PINFUNC_S1B		(1<<2)
+#endif
+
 #define SYS_TRIOUTRD              0xB1900100
 #define SYS_TRIOUTCLR             0xB1900100
 #define SYS_OUTPUTRD              0xB1900108
@@ -1300,7 +1695,6 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define SD1_XMIT_FIFO	0xB0680000
 #define SD1_RECV_FIFO	0xB0680004
 
-
 #if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
 /* Au1500 PCI Controller */
 #define Au1500_CFG_BASE           0xB4005000 // virtual, kseg0 addr
@@ -1363,36 +1757,77 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 		      _ctl_; })
 
 
-#else /* Au1000 and Au1100 */
+#else /* Au1000 and Au1100 and Au1200 */
 
 /* don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START 0x10000000;
+#define IOPORT_RESOURCE_START 0x10000000
 #define IOPORT_RESOURCE_END   0xffffffff
 #define IOMEM_RESOURCE_START  0x10000000
 #define IOMEM_RESOURCE_END    0xffffffff
 
-#ifdef CONFIG_MIPS_PB1000
-#define PCI_IO_START      0x10000000
-#define PCI_IO_END        0x1000ffff
-#define PCI_MEM_START     0x18000000
-#define PCI_MEM_END       0x18ffffff
-#define PCI_FIRST_DEVFN   0
-#define PCI_LAST_DEVFN    1
-#else
-/* no PCI bus controller */
 #define PCI_IO_START    0
 #define PCI_IO_END      0
 #define PCI_MEM_START   0
 #define PCI_MEM_END     0
 #define PCI_FIRST_DEVFN 0
 #define PCI_LAST_DEVFN  0
-#endif
 
 #endif
 
+#ifndef _LANGUAGE_ASSEMBLY
+typedef volatile struct
+{
+	/* 0x0000 */ u32 toytrim;
+	/* 0x0004 */ u32 toywrite;
+	/* 0x0008 */ u32 toymatch0;
+	/* 0x000C */ u32 toymatch1;
+	/* 0x0010 */ u32 toymatch2;
+	/* 0x0014 */ u32 cntrctrl;
+	/* 0x0018 */ u32 scratch0;
+	/* 0x001C */ u32 scratch1;
+	/* 0x0020 */ u32 freqctrl0;
+	/* 0x0024 */ u32 freqctrl1;
+	/* 0x0028 */ u32 clksrc;
+	/* 0x002C */ u32 pinfunc;
+	/* 0x0030 */ u32 reserved0;
+	/* 0x0034 */ u32 wakemsk;
+	/* 0x0038 */ u32 endian;
+	/* 0x003C */ u32 powerctrl;
+	/* 0x0040 */ u32 toyread;
+	/* 0x0044 */ u32 rtctrim;
+	/* 0x0048 */ u32 rtcwrite;
+	/* 0x004C */ u32 rtcmatch0;
+	/* 0x0050 */ u32 rtcmatch1;
+	/* 0x0054 */ u32 rtcmatch2;
+	/* 0x0058 */ u32 rtcread;
+	/* 0x005C */ u32 wakesrc;
+	/* 0x0060 */ u32 cpupll;
+	/* 0x0064 */ u32 auxpll;
+	/* 0x0068 */ u32 reserved1;
+	/* 0x006C */ u32 reserved2;
+	/* 0x0070 */ u32 reserved3;
+	/* 0x0074 */ u32 reserved4;
+	/* 0x0078 */ u32 slppwr;
+	/* 0x007C */ u32 sleep;
+	/* 0x0080 */ u32 reserved5[32];
+	/* 0x0100 */ u32 trioutrd;
+#define trioutclr trioutrd
+	/* 0x0104 */ u32 reserved6;
+	/* 0x0108 */ u32 outputrd;
+#define outputset outputrd
+	/* 0x010C */ u32 outputclr;
+	/* 0x0110 */ u32 pinstaterd;
+#define pininputen pinstaterd
+
+} AU1X00_SYS;
+
+static AU1X00_SYS* const sys  = (AU1X00_SYS *)SYS_BASE;
+
+#endif
 /* Processor information base on prid.
  * Copied from PowerPC.
  */
+#ifndef _LANGUAGE_ASSEMBLY
 struct cpu_spec {
 	/* CPU is matched via (PRID & prid_mask) == prid_value */
 	unsigned int	prid_mask;
@@ -1406,3 +1841,6 @@ struct cpu_spec {
 extern struct cpu_spec		cpu_specs[];
 extern struct cpu_spec		*cur_cpu_spec[];
 #endif
+
+#endif
+
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index d5eb88cd7d51..ddbd9f5a2489 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -45,7 +45,7 @@
 #define DDMA_GLOBAL_BASE	0xb4003000
 #define DDMA_CHANNEL_BASE	0xb4002000
 
-typedef struct dbdma_global {
+typedef volatile struct dbdma_global {
 	u32	ddma_config;
 	u32	ddma_intstat;
 	u32	ddma_throttle;
@@ -62,7 +62,7 @@ typedef struct dbdma_global {
 
 /* The structure of a DMA Channel.
 */
-typedef struct au1xxx_dma_channel {
+typedef volatile struct au1xxx_dma_channel {
 	u32	ddma_cfg;	/* See below */
 	u32	ddma_desptr;	/* 32-byte aligned pointer to descriptor */
 	u32	ddma_statptr;	/* word aligned pointer to status word */
@@ -98,7 +98,7 @@ typedef struct au1xxx_dma_channel {
 /* "Standard" DDMA Descriptor.
  * Must be 32-byte aligned.
  */
-typedef struct au1xxx_ddma_desc {
+typedef volatile struct au1xxx_ddma_desc {
 	u32	dscr_cmd0;		/* See below */
 	u32	dscr_cmd1;		/* See below */
 	u32	dscr_source0;		/* source phys address */
@@ -107,6 +107,12 @@ typedef struct au1xxx_ddma_desc {
 	u32	dscr_dest1;		/* See below */
 	u32	dscr_stat;		/* completion status */
 	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
+	/* First 32bytes are HW specific!!!
+	   Lets have some SW data following.. make sure its 32bytes
+	 */
+	u32	sw_status;
+	u32 	sw_context;
+	u32	sw_reserved[6];
 } au1x_ddma_desc_t;
 
 #define DSCR_CMD0_V		(1 << 31)	/* Descriptor valid */
@@ -125,8 +131,11 @@ typedef struct au1xxx_ddma_desc {
 #define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
 #define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
 
+#define SW_STATUS_INUSE		(1<<0)
+
 /* Command 0 device IDs.
 */
+#ifdef CONFIG_SOC_AU1550
 #define DSCR_CMD0_UART0_TX	0
 #define DSCR_CMD0_UART0_RX	1
 #define DSCR_CMD0_UART3_TX	2
@@ -155,9 +164,45 @@ typedef struct au1xxx_ddma_desc {
 #define DSCR_CMD0_MAC0_TX	25
 #define DSCR_CMD0_MAC1_RX	26
 #define DSCR_CMD0_MAC1_TX	27
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+#define DSCR_CMD0_UART0_TX	0
+#define DSCR_CMD0_UART0_RX	1
+#define DSCR_CMD0_UART1_TX	2
+#define DSCR_CMD0_UART1_RX	3
+#define DSCR_CMD0_DMA_REQ0	4
+#define DSCR_CMD0_DMA_REQ1	5
+#define DSCR_CMD0_MAE_BE	6
+#define DSCR_CMD0_MAE_FE	7
+#define DSCR_CMD0_SDMS_TX0	8
+#define DSCR_CMD0_SDMS_RX0	9
+#define DSCR_CMD0_SDMS_TX1	10
+#define DSCR_CMD0_SDMS_RX1	11
+#define DSCR_CMD0_AES_TX	13
+#define DSCR_CMD0_AES_RX	12
+#define DSCR_CMD0_PSC0_TX	14
+#define DSCR_CMD0_PSC0_RX	15
+#define DSCR_CMD0_PSC1_TX	16
+#define DSCR_CMD0_PSC1_RX	17
+#define DSCR_CMD0_CIM_RXA	18
+#define DSCR_CMD0_CIM_RXB	19
+#define DSCR_CMD0_CIM_RXC	20
+#define DSCR_CMD0_MAE_BOTH	21
+#define DSCR_CMD0_LCD		22
+#define DSCR_CMD0_NAND_FLASH	23
+#define DSCR_CMD0_PSC0_SYNC	24
+#define DSCR_CMD0_PSC1_SYNC	25
+#define DSCR_CMD0_CIM_SYNC	26
+#endif /* CONFIG_SOC_AU1200 */
+
 #define DSCR_CMD0_THROTTLE	30
 #define DSCR_CMD0_ALWAYS	31
 #define DSCR_NDEV_IDS		32
+/* THis macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x,d)	(((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
+#define DSCR_CUSTOM2DEV_ID(x)	((x)&0xFF)
+
 
 #define DSCR_CMD0_SID(x)	(((x) & 0x1f) << 25)
 #define DSCR_CMD0_DID(x)	(((x) & 0x1f) << 20)
@@ -246,6 +291,43 @@ typedef struct au1xxx_ddma_desc {
 */
 #define NUM_DBDMA_CHANS	16
 
+/*
+ * Ddma API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+	u32		dev_id;
+	u32		dev_flags;
+	u32		dev_tsize;
+	u32		dev_devwidth;
+	u32		dev_physaddr;		/* If FIFO */
+	u32		dev_intlevel;
+	u32		dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+	spinlock_t      lock;
+
+	u32			chan_flags;
+	u32			chan_index;
+	dbdev_tab_t		*chan_src;
+	dbdev_tab_t		*chan_dest;
+	au1x_dma_chan_t		*chan_ptr;
+	au1x_ddma_desc_t	*chan_desc_base;
+	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
+	void			*chan_callparam;
+	void (*chan_callback)(int, void *, struct pt_regs *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE		(1 << 0)
+#define DEV_FLAGS_ANYUSE	(1 << 1)
+#define DEV_FLAGS_OUT		(1 << 2)
+#define DEV_FLAGS_IN		(1 << 3)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_SYNC		(1 << 5)
+/* end Ddma API definitions */
+
 /* External functions for drivers to use.
 */
 /* Use this to allocate a dbdma channel.  The device ids are one of the
@@ -258,18 +340,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 
 #define DBDMA_MEM_CHAN	DSCR_CMD0_ALWAYS
 
-/* ACK!  These should be in a board specific description file.
-*/
-#ifdef CONFIG_MIPS_PB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#endif
-#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#endif
-
-
 /* Set the device width of a in/out fifo.
 */
 u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
@@ -280,8 +350,8 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
 
 /* Put buffers on source/destination descriptors.
 */
-u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes);
-u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes);
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
 
 /* Get a buffer from the destination descriptor.
 */
@@ -295,5 +365,25 @@ u32 au1xxx_get_dma_residue(u32 chanid);
 void au1xxx_dbdma_chan_free(u32 chanid);
 void au1xxx_dbdma_dump(u32 chanid);
 
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
+
+u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
+
+/*
+ 	Some compatibilty macros --
+		Needed to make changes to API without breaking existing drivers
+*/
+#define	au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define	au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+
+#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define	au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+
+/*
+ *	Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE	(1<<0)
+#define DDMA_FLAGS_NOIE (1<<1)
+
 #endif /* _LANGUAGE_ASSEMBLY */
 #endif /* _AU1000_DBDMA_H_ */
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
new file mode 100644
index 000000000000..6d1ddf43d290
--- /dev/null
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -0,0 +1,214 @@
+/*
+ * AMD Alchemy DB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1200_H
+#define __ASM_DB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+   Refer to board documentation.
+ */
+#define SPI_PSC_BASE        PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE      PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+   Refer to board documentation.
+ */
+#define AC97_PSC_BASE       PSC1_BASE_ADDR
+#define I2S_PSC_BASE		PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xB9800000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 board;
+		u16 reserved5;
+	/*18*/	u16 disk_leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+	/*20*/	u16 intclr;
+		u16 reserved8;
+	/*24*/	u16 intset;
+		u16 reserved9;
+	/*28*/	u16 intclr_mask;
+		u16 reserved10;
+	/*2C*/	u16 intset_mask;
+		u16 reserved11;
+
+	/*30*/	u16 sig_status;
+		u16 reserved12;
+	/*34*/	u16 int_status;
+		u16 reserved13;
+	/*38*/	u16 reserved14;
+		u16 reserved15;
+	/*3C*/	u16 reserved16;
+		u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_IDECBLID	0x0200
+#define BCSR_STATUS_SD0WP		0x0400
+#define BCSR_STATUS_U0RXD		0x1000
+#define BCSR_STATUS_U1RXD		0x2000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_ETH		0x0001
+#define BCSR_RESETS_CAMERA	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_IDE		0x0008
+#define BCSR_RESETS_TV		0x0010
+/* not resets but in the same register */
+#define BCSR_RESETS_PWMR1mUX 0x0800
+#define BCSR_RESETS_PCS0MUX	0x1000
+#define BCSR_RESETS_PCS1MUX	0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_BOARD_LCDVEE	0x0001
+#define BCSR_BOARD_LCDVDD	0x0002
+#define BCSR_BOARD_LCDBL	0x0004
+#define BCSR_BOARD_CAMSNAP	0x0010
+#define BCSR_BOARD_CAMPWR	0x0020
+#define BCSR_BOARD_SD0PWR	0x0040
+
+#define BCSR_LEDS_DECIMALS	0x0003
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC			0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+
+#define AU1XXX_SMC91111_PHYS_ADDR	(0x19000300)
+#define AU1XXX_SMC91111_IRQ			DB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR		(0x18800000)
+#define AU1XXX_ATA_PHYS_LEN			(0x100)
+#define AU1XXX_ATA_REG_OFFSET	(5)
+#define AU1XXX_ATA_INT			DB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ		DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE		128
+
+#define NAND_PHYS_ADDR   0x20000000
+
+/*
+ *	External Interrupts for Pb1200 as of 8/6/2004.
+ *   Bit positions in the CPLD registers can be calculated by taking
+ *   the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ *    *example: IDE bis pos is  = 64 - 64
+                ETH bit pos is  = 65 - 64
+ */
+#define DB1200_INT_BEGIN		(AU1000_LAST_INTC1_INT + 1)
+#define DB1200_IDE_INT			(DB1200_INT_BEGIN + 0)
+#define DB1200_ETH_INT			(DB1200_INT_BEGIN + 1)
+#define DB1200_PC0_INT			(DB1200_INT_BEGIN + 2)
+#define DB1200_PC0_STSCHG_INT	(DB1200_INT_BEGIN + 3)
+#define DB1200_PC1_INT			(DB1200_INT_BEGIN + 4)
+#define DB1200_PC1_STSCHG_INT	(DB1200_INT_BEGIN + 5)
+#define DB1200_DC_INT			(DB1200_INT_BEGIN + 6)
+#define DB1200_FLASHBUSY_INT	(DB1200_INT_BEGIN + 7)
+#define DB1200_PC0_INSERT_INT	(DB1200_INT_BEGIN + 8)
+#define DB1200_PC0_EJECT_INT	(DB1200_INT_BEGIN + 9)
+#define DB1200_PC1_INSERT_INT	(DB1200_INT_BEGIN + 10)
+#define DB1200_PC1_EJECT_INT	(DB1200_INT_BEGIN + 11)
+#define DB1200_SD0_INSERT_INT	(DB1200_INT_BEGIN + 12)
+#define DB1200_SD0_EJECT_INT	(DB1200_INT_BEGIN + 13)
+
+#define DB1200_INT_END			(DB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_DB1200_H */
+
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
new file mode 100644
index 000000000000..0f6646335e90
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -0,0 +1,244 @@
+/*
+ * AMD Alchemy PB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+   Refer to board documentation.
+ */
+#define SPI_PSC_BASE        PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE      PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+   Refer to board documentation.
+ */
+#define AC97_PSC_BASE       PSC1_BASE_ADDR
+#define I2S_PSC_BASE		PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 board;
+		u16 reserved5;
+	/*18*/	u16 disk_leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+	/*20*/	u16 intclr;
+		u16 reserved8;
+	/*24*/	u16 intset;
+		u16 reserved9;
+	/*28*/	u16 intclr_mask;
+		u16 reserved10;
+	/*2C*/	u16 intset_mask;
+		u16 reserved11;
+
+	/*30*/	u16 sig_status;
+		u16 reserved12;
+	/*34*/	u16 int_status;
+		u16 reserved13;
+	/*38*/	u16 reserved14;
+		u16 reserved15;
+	/*3C*/	u16 reserved16;
+		u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_IDECBLID	0x0200
+#define BCSR_STATUS_SD0WP		0x0400
+#define BCSR_STATUS_SD1WP		0x0800
+#define BCSR_STATUS_U0RXD		0x1000
+#define BCSR_STATUS_U1RXD		0x2000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_ETH		0x0001
+#define BCSR_RESETS_CAMERA	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_IDE		0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM  0x0800
+#define BCSR_RESETS_PCS0MUX	0x1000
+#define BCSR_RESETS_PCS1MUX	0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_SD1MUX  0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_BOARD_LCDVEE	0x0001
+#define BCSR_BOARD_LCDVDD	0x0002
+#define BCSR_BOARD_LCDBL	0x0004
+#define BCSR_BOARD_CAMSNAP	0x0010
+#define BCSR_BOARD_CAMPWR	0x0020
+#define BCSR_BOARD_SD0PWR	0x0040
+#define BCSR_BOARD_SD1PWR	0x0080
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC			0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+#define BCSR_INT_SD1INSERT	0x4000
+#define BCSR_INT_SD1EJECT	0x8000
+
+#define AU1XXX_SMC91111_PHYS_ADDR	(0x0D000300)
+#define AU1XXX_SMC91111_IRQ			PB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR		(0x0C800000)
+#define AU1XXX_ATA_PHYS_LEN			(0x100)
+#define AU1XXX_ATA_REG_OFFSET	(5)
+#define AU1XXX_ATA_INT			PB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ		DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE		128
+
+#define NAND_PHYS_ADDR   0x1C000000
+
+/* Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H			(18 >> 2)
+#define NAND_T_PUL			(30 >> 2)
+#define NAND_T_SU			(30 >> 2)
+#define NAND_T_WH			(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
+			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
+			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
+			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
+
+
+/*
+ *	External Interrupts for Pb1200 as of 8/6/2004.
+ *   Bit positions in the CPLD registers can be calculated by taking
+ *   the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ *    *example: IDE bis pos is  = 64 - 64
+                ETH bit pos is  = 65 - 64
+ */
+#define PB1200_INT_BEGIN		(AU1000_LAST_INTC1_INT + 1)
+#define PB1200_IDE_INT			(PB1200_INT_BEGIN + 0)
+#define PB1200_ETH_INT			(PB1200_INT_BEGIN + 1)
+#define PB1200_PC0_INT			(PB1200_INT_BEGIN + 2)
+#define PB1200_PC0_STSCHG_INT	(PB1200_INT_BEGIN + 3)
+#define PB1200_PC1_INT			(PB1200_INT_BEGIN + 4)
+#define PB1200_PC1_STSCHG_INT	(PB1200_INT_BEGIN + 5)
+#define PB1200_DC_INT			(PB1200_INT_BEGIN + 6)
+#define PB1200_FLASHBUSY_INT	(PB1200_INT_BEGIN + 7)
+#define PB1200_PC0_INSERT_INT	(PB1200_INT_BEGIN + 8)
+#define PB1200_PC0_EJECT_INT	(PB1200_INT_BEGIN + 9)
+#define PB1200_PC1_INSERT_INT	(PB1200_INT_BEGIN + 10)
+#define PB1200_PC1_EJECT_INT	(PB1200_INT_BEGIN + 11)
+#define PB1200_SD0_INSERT_INT	(PB1200_INT_BEGIN + 12)
+#define PB1200_SD0_EJECT_INT	(PB1200_INT_BEGIN + 13)
+#define PB1200_SD1_INSERT_INT	(PB1200_INT_BEGIN + 14)
+#define PB1200_SD1_EJECT_INT	(PB1200_INT_BEGIN + 15)
+
+#define PB1200_INT_END			(PB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_PB1200_H */
+