Merge tag 'mmc-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix releasing the host by canceling the delayed work
   - Fix pause retune on all RPMB partitions

  MMC host:
   - meson-mx-sdhc: Fix HW hang during card initialization
   - sdhci-sprd: Fix eMMC init failure after HW reset"

* tag 'mmc-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix eMMC init failure after hw reset
  mmc: core: Cancel delayed work before releasing host
  mmc: rpmb: fixes pause retune on all RPMB partitions.
  mmc: meson-mx-sdhc: Fix initialization frozen issue

4 files changed, 17 insertions, 27 deletions

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index f9a5cffa64b1..134c36edb6cf 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -851,9 +851,10 @@ static const struct block_device_operations mmc_bdops = {
 static int mmc_blk_part_switch_pre(struct mmc_card *card,
 				   unsigned int part_type)
 {
+	const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB;
 	int ret = 0;
 
-	if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
+	if ((part_type & mask) == mask) {
 		if (card->ext_csd.cmdq_en) {
 			ret = mmc_cmdq_disable(card);
 			if (ret)
@@ -868,9 +869,10 @@ static int mmc_blk_part_switch_pre(struct mmc_card *card,
 static int mmc_blk_part_switch_post(struct mmc_card *card,
 				    unsigned int part_type)
 {
+	const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB;
 	int ret = 0;
 
-	if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
+	if ((part_type & mask) == mask) {
 		mmc_retune_unpause(card->host);
 		if (card->reenable_cmdq && !card->ext_csd.cmdq_en)
 			ret = mmc_cmdq_enable(card);
@@ -3145,4 +3147,3 @@ module_exit(mmc_blk_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
-
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 096093f7be00..2f51db4df1a8 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -692,6 +692,7 @@ EXPORT_SYMBOL(mmc_remove_host);
  */
 void mmc_free_host(struct mmc_host *host)
 {
+	cancel_delayed_work_sync(&host->detect);
 	mmc_pwrseq_free(host);
 	put_device(&host->class_dev);
 }
diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c
index 528ec8166e7c..1ed9731e77ef 100644
--- a/drivers/mmc/host/meson-mx-sdhc-mmc.c
+++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c
@@ -269,7 +269,7 @@ static int meson_mx_sdhc_enable_clks(struct mmc_host *mmc)
 static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct meson_mx_sdhc_host *host = mmc_priv(mmc);
-	u32 rx_clk_phase;
+	u32 val, rx_clk_phase;
 	int ret;
 
 	meson_mx_sdhc_disable_clks(mmc);
@@ -290,27 +290,11 @@ static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios)
 		mmc->actual_clock = clk_get_rate(host->sd_clk);
 
 		/*
-		 * according to Amlogic the following latching points are
-		 * selected with empirical values, there is no (known) formula
-		 * to calculate these.
+		 * Phase 90 should work in most cases. For data transmission,
+		 * meson_mx_sdhc_execute_tuning() will find a accurate value
 		 */
-		if (mmc->actual_clock > 100000000) {
-			rx_clk_phase = 1;
-		} else if (mmc->actual_clock > 45000000) {
-			if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
-				rx_clk_phase = 15;
-			else
-				rx_clk_phase = 11;
-		} else if (mmc->actual_clock >= 25000000) {
-			rx_clk_phase = 15;
-		} else if (mmc->actual_clock > 5000000) {
-			rx_clk_phase = 23;
-		} else if (mmc->actual_clock > 1000000) {
-			rx_clk_phase = 55;
-		} else {
-			rx_clk_phase = 1061;
-		}
-
+		regmap_read(host->regmap, MESON_SDHC_CLKC, &val);
+		rx_clk_phase = FIELD_GET(MESON_SDHC_CLKC_CLK_DIV, val) / 4;
 		regmap_update_bits(host->regmap, MESON_SDHC_CLK2,
 				   MESON_SDHC_CLK2_RX_CLK_PHASE,
 				   FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE,
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 6b8a57e2d20f..bed57a1c64b5 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -239,15 +239,19 @@ static inline void _sdhci_sprd_set_clock(struct sdhci_host *host,
 	div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8);
 	sdhci_enable_clk(host, div);
 
+	val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
+	mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
 	/* Enable CLK_AUTO when the clock is greater than 400K. */
 	if (clk > 400000) {
-		val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
-		mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN |
-			SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
 		if (mask != (val & mask)) {
 			val |= mask;
 			sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
 		}
+	} else {
+		if (val & mask) {
+			val &= ~mask;
+			sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
+		}
 	}
 }