Merge branch 'drm-intel-fixes' into drm-intel-next

56 files changed, 738 insertions, 227 deletions

diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index eb6b54dbb806..85ffd5e38c50 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -1213,3 +1213,4 @@ module_exit(sh_dmae_exit);
 MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
 MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-dma-engine");
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index e23c06893d19..599f6c9e0fbf 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -56,6 +56,18 @@ static struct cs5535_gpio_chip {
  * registers, see include/linux/cs5535.h.
  */
 
+static void errata_outl(u32 val, unsigned long addr)
+{
+	/*
+	 * According to the CS5536 errata (#36), after suspend
+	 * a write to the high bank GPIO register will clear all
+	 * non-selected bits; the recommended workaround is a
+	 * read-modify-write operation.
+	 */
+	val |= inl(addr);
+	outl(val, addr);
+}
+
 static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		unsigned int reg)
 {
@@ -64,7 +76,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << offset, chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << (offset - 16), chip->base + 0x80 + reg);
+		errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -86,7 +98,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << (offset + 16), chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << offset, chip->base + 0x80 + reg);
+		errata_outl(1 << offset, chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_clear(unsigned offset, unsigned int reg)
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 7ca59359fee2..bede10a03407 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -241,7 +241,7 @@ void drm_helper_disable_unused_functions(struct drm_device *dev)
 	}
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		if (!drm_helper_encoder_in_use(encoder)) {
+		if (encoder->crtc && !drm_helper_encoder_in_use(encoder)) {
 			drm_encoder_disable(encoder);
 			/* disconnector encoder from any connector */
 			encoder->crtc = NULL;
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 9d3a5030b6e1..722700d5d73e 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -585,10 +585,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	struct timeval now;
 	unsigned long flags;
 	unsigned int seq;
+	int ret;
 
 	e = kzalloc(sizeof *e, GFP_KERNEL);
-	if (e == NULL)
-		return -ENOMEM;
+	if (e == NULL) {
+		ret = -ENOMEM;
+		goto err_put;
+	}
 
 	e->pipe = pipe;
 	e->base.pid = current->pid;
@@ -603,9 +606,8 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	spin_lock_irqsave(&dev->event_lock, flags);
 
 	if (file_priv->event_space < sizeof e->event) {
-		spin_unlock_irqrestore(&dev->event_lock, flags);
-		kfree(e);
-		return -ENOMEM;
+		ret = -EBUSY;
+		goto err_unlock;
 	}
 
 	file_priv->event_space -= sizeof e->event;
@@ -638,6 +640,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
 	return 0;
+
+err_unlock:
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+	kfree(e);
+err_put:
+	drm_vblank_put(dev, e->pipe);
+	return ret;
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c
index 65c88f9ba12c..2cb8e0b9f1ee 100644
--- a/drivers/gpu/drm/i915/intel_acpi.c
+++ b/drivers/gpu/drm/i915/intel_acpi.c
@@ -190,37 +190,6 @@ out:
 	kfree(output.pointer);
 }
 
-static int intel_dsm_switchto(enum vga_switcheroo_client_id id)
-{
-	return 0;
-}
-
-static int intel_dsm_power_state(enum vga_switcheroo_client_id id,
-				 enum vga_switcheroo_state state)
-{
-	return 0;
-}
-
-static int intel_dsm_init(void)
-{
-	return 0;
-}
-
-static int intel_dsm_get_client_id(struct pci_dev *pdev)
-{
-	if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev))
-		return VGA_SWITCHEROO_IGD;
-	else
-		return VGA_SWITCHEROO_DIS;
-}
-
-static struct vga_switcheroo_handler intel_dsm_handler = {
-	.switchto = intel_dsm_switchto,
-	.power_state = intel_dsm_power_state,
-	.init = intel_dsm_init,
-	.get_client_id = intel_dsm_get_client_id,
-};
-
 static bool intel_dsm_pci_probe(struct pci_dev *pdev)
 {
 	acpi_handle dhandle, intel_handle;
@@ -276,11 +245,8 @@ void intel_register_dsm_handler(void)
 {
 	if (!intel_dsm_detect())
 		return;
-
-	vga_switcheroo_register_handler(&intel_dsm_handler);
 }
 
 void intel_unregister_dsm_handler(void)
 {
-	vga_switcheroo_unregister_handler();
 }
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 63101230b78d..1dc60408d5b8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -479,6 +479,7 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 	uint16_t address = algo_data->address;
 	uint8_t msg[5];
 	uint8_t reply[2];
+	unsigned retry;
 	int msg_bytes;
 	int reply_bytes;
 	int ret;
@@ -513,14 +514,33 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 		break;
 	}
 
-	for (;;) {
-	  ret = intel_dp_aux_ch(intel_dp,
-				msg, msg_bytes,
-				reply, reply_bytes);
+	for (retry = 0; retry < 5; retry++) {
+		ret = intel_dp_aux_ch(intel_dp,
+				      msg, msg_bytes,
+				      reply, reply_bytes);
 		if (ret < 0) {
 			DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
 			return ret;
 		}
+
+		switch (reply[0] & AUX_NATIVE_REPLY_MASK) {
+		case AUX_NATIVE_REPLY_ACK:
+			/* I2C-over-AUX Reply field is only valid
+			 * when paired with AUX ACK.
+			 */
+			break;
+		case AUX_NATIVE_REPLY_NACK:
+			DRM_DEBUG_KMS("aux_ch native nack\n");
+			return -EREMOTEIO;
+		case AUX_NATIVE_REPLY_DEFER:
+			udelay(100);
+			continue;
+		default:
+			DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
+				  reply[0]);
+			return -EREMOTEIO;
+		}
+
 		switch (reply[0] & AUX_I2C_REPLY_MASK) {
 		case AUX_I2C_REPLY_ACK:
 			if (mode == MODE_I2C_READ) {
@@ -528,17 +548,20 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 			}
 			return reply_bytes - 1;
 		case AUX_I2C_REPLY_NACK:
-			DRM_DEBUG_KMS("aux_ch nack\n");
+			DRM_DEBUG_KMS("aux_i2c nack\n");
 			return -EREMOTEIO;
 		case AUX_I2C_REPLY_DEFER:
-			DRM_DEBUG_KMS("aux_ch defer\n");
+			DRM_DEBUG_KMS("aux_i2c defer\n");
 			udelay(100);
 			break;
 		default:
-			DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
+			DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
 			return -EREMOTEIO;
 		}
 	}
+
+	DRM_ERROR("too many retries, giving up\n");
+	return -EREMOTEIO;
 }
 
 static int
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 67c545204f19..74b99718a1fb 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -696,20 +696,17 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
 	unsigned long end;
 	u32 head;
 
-	head = intel_read_status_page(ring, 4);
-	if (head) {
-		ring->head = head & HEAD_ADDR;
-		ring->space = ring->head - (ring->tail + 8);
-		if (ring->space < 0)
-			ring->space += ring->size;
-		if (ring->space >= n)
-			return 0;
-	}
-
 	trace_i915_ring_wait_begin (dev);
 	end = jiffies + 3 * HZ;
 	do {
-		ring->head = I915_READ_HEAD(ring) & HEAD_ADDR;
+		/* If the reported head position has wrapped or hasn't advanced,
+		 * fallback to the slow and accurate path.
+		 */
+		head = intel_read_status_page(ring, 4);
+		if (head < ring->actual_head)
+			head = I915_READ_HEAD(ring);
+		ring->actual_head = head;
+		ring->head = head & HEAD_ADDR;
 		ring->space = ring->head - (ring->tail + 8);
 		if (ring->space < 0)
 			ring->space += ring->size;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 6a3822bc6af2..9652e4600b5e 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -44,8 +44,9 @@ struct  intel_ring_buffer {
 	struct		drm_device *dev;
 	struct		drm_i915_gem_object *obj;
 
-	unsigned int	head;
-	unsigned int	tail;
+	u32		actual_head;
+	u32		head;
+	u32		tail;
 	int		space;
 	int		size;
 	struct intel_hw_status_page status_page;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d97e6cb52d34..27e63abf2a73 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1908,9 +1908,12 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
 		speed = mapping->i2c_speed;
 	}
 
-	sdvo->i2c = &dev_priv->gmbus[pin].adapter;
-	intel_gmbus_set_speed(sdvo->i2c, speed);
-	intel_gmbus_force_bit(sdvo->i2c, true);
+	if (pin < GMBUS_NUM_PORTS) {
+		sdvo->i2c = &dev_priv->gmbus[pin].adapter;
+		intel_gmbus_set_speed(sdvo->i2c, speed);
+		intel_gmbus_force_bit(sdvo->i2c, true);
+	} else
+		sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
 }
 
 static bool
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index a3552594ccc4..a322d4f647bd 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1195,8 +1195,10 @@ void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 				mc->vram_end, mc->real_vram_size >> 20);
 	} else {
 		u64 base = 0;
-		if (rdev->flags & RADEON_IS_IGP)
-			base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
+		if (rdev->flags & RADEON_IS_IGP) {
+			base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF;
+			base <<= 24;
+		}
 		radeon_vram_location(rdev, &rdev->mc, base);
 		rdev->mc.gtt_base_align = 0;
 		radeon_gtt_location(rdev, mc);
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index d8ac1849180d..e12e79326cb1 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -286,7 +286,7 @@ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64
 		mc->mc_vram_size = mc->aper_size;
 	}
 	mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
-	dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
+	dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
 			mc->mc_vram_size >> 20, mc->vram_start,
 			mc->vram_end, mc->real_vram_size >> 20);
 }
@@ -323,7 +323,7 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 		mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
 	}
 	mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
-	dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
+	dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n",
 			mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end);
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 1d067743fee0..a598d0049aa5 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -69,7 +69,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain)
 	u32 c = 0;
 
 	rbo->placement.fpfn = 0;
-	rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
+	rbo->placement.lpfn = 0;
 	rbo->placement.placement = rbo->placements;
 	rbo->placement.busy_placement = rbo->placements;
 	if (domain & RADEON_GEM_DOMAIN_VRAM)
@@ -91,7 +91,8 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 {
 	struct radeon_bo *bo;
 	enum ttm_bo_type type;
-	int page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+	unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+	unsigned long max_size = 0;
 	int r;
 
 	if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
@@ -104,6 +105,14 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 	}
 	*bo_ptr = NULL;
 
+	/* maximun bo size is the minimun btw visible vram and gtt size */
+	max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+	if ((page_align << PAGE_SHIFT) >= max_size) {
+		printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
+			__func__, __LINE__, page_align  >> (20 - PAGE_SHIFT), max_size >> 20);
+		return -ENOMEM;
+	}
+
 retry:
 	bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
 	if (bo == NULL)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 515345b11ac9..88cb04e7962b 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1386,6 +1386,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 54b017ad258d..5a1b52e0eb85 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -221,7 +221,7 @@ static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	struct egalax_data *td;
 	struct hid_report *report;
 
-	td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+	td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
 	if (!td) {
 		dev_err(&hdev->dev, "cannot allocate eGalax data\n");
 		return -ENOMEM;
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index bb0b3659437b..d8d372bae3cc 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
 
 		clear_bit(*old_keycode, dev->keybit);
 		set_bit(usage->code, dev->keybit);
-		dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+		dbg_hid("Assigned keycode %d to HID usage code %x\n",
 			usage->code, usage->hid);
 
 		/*
@@ -203,8 +203,8 @@ static int hidinput_setkeycode(struct input_dev *dev,
  *
  * as seen in the HID specification v1.11 6.2.2.7 Global Items.
  *
- * Only exponent 1 length units are processed. Centimeters are converted to
- * inches. Degrees are converted to radians.
+ * Only exponent 1 length units are processed. Centimeters and inches are
+ * converted to millimeters. Degrees are converted to radians.
  */
 static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 {
@@ -225,13 +225,16 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 	 */
 	if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
 		if (field->unit == 0x11) {		/* If centimeters */
-			/* Convert to inches */
-			prev = logical_extents;
-			logical_extents *= 254;
-			if (logical_extents < prev)
+			/* Convert to millimeters */
+			unit_exponent += 1;
+		} else if (field->unit == 0x13) {	/* If inches */
+			/* Convert to millimeters */
+			prev = physical_extents;
+			physical_extents *= 254;
+			if (physical_extents < prev)
 				return 0;
-			unit_exponent += 2;
-		} else if (field->unit != 0x13) {	/* If not inches */
+			unit_exponent -= 1;
+		} else {
 			return 0;
 		}
 	} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 15434c814793..25be4e1461bd 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -256,6 +256,8 @@ static const struct hid_device_id tm_devices[] = {
 		.driver_data = (unsigned long)ff_joystick },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654),	/* FGT Force Feedback Wheel */
 		.driver_data = (unsigned long)ff_joystick },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a),	/* F430 Force Feedback Wheel */
+		.driver_data = (unsigned long)ff_joystick },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, tm_devices);
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index b923074b2cbe..30f06e956bfb 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -75,8 +75,7 @@ config I2C_HELPER_AUTO
 	  In doubt, say Y.
 
 config I2C_SMBUS
-	tristate
-	prompt "SMBus-specific protocols" if !I2C_HELPER_AUTO
+	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
 	help
 	  Say Y here if you want support for SMBus extensions to the I2C
 	  specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 3998dd620a03..f1cfe7e5508b 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menu "I2C Algorithms"
-	depends on !I2C_HELPER_AUTO
+	visible if !I2C_HELPER_AUTO
 
 config I2C_ALGOBIT
 	tristate "I2C bit-banging interfaces"
@@ -15,15 +15,3 @@ config I2C_ALGOPCA
 	tristate "I2C PCA 9564 interfaces"
 
 endmenu
-
-# In automatic configuration mode, we still have to define the
-# symbols to avoid unmet dependencies.
-
-if I2C_HELPER_AUTO
-config I2C_ALGOBIT
-	tristate
-config I2C_ALGOPCF
-	tristate
-config I2C_ALGOPCA
-	tristate
-endif
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index d53b9e900234..27b6a3ce18ca 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -245,6 +245,7 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
 		goto err_free_tgfx;
         }
 
+	parport_put_port(pp);
 	return tgfx;
 
  err_free_dev:
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b8c51b9781db..3a87f3ba5f75 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -179,6 +179,22 @@ config KEYBOARD_GPIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio_keys.
 
+config KEYBOARD_GPIO_POLLED
+	tristate "Polled GPIO buttons"
+	depends on GENERIC_GPIO
+	select INPUT_POLLDEV
+	help
+	  This driver implements support for buttons connected
+	  to GPIO pins that are not capable of generating interrupts.
+
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio_keys_polled.
+
 config KEYBOARD_TCA6416
 	tristate "TCA6416 Keypad Support"
 	depends on I2C
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index a34452e8ebe2..622de73a445d 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED)	+= gpio_keys_polled.o
 obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
new file mode 100644
index 000000000000..4c17aff20657
--- /dev/null
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -0,0 +1,261 @@
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *	Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *	Copyright 2005 Phil Blundell
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#define DRV_NAME	"gpio-keys-polled"
+
+struct gpio_keys_button_data {
+	int last_state;
+	int count;
+	int threshold;
+	int can_sleep;
+};
+
+struct gpio_keys_polled_dev {
+	struct input_polled_dev *poll_dev;
+	struct device *dev;
+	struct gpio_keys_platform_data *pdata;
+	struct gpio_keys_button_data data[0];
+};
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+					 struct gpio_keys_button *button,
+					 struct gpio_keys_button_data *bdata)
+{
+	int state;
+
+	if (bdata->can_sleep)
+		state = !!gpio_get_value_cansleep(button->gpio);
+	else
+		state = !!gpio_get_value(button->gpio);
+
+	if (state != bdata->last_state) {
+		unsigned int type = button->type ?: EV_KEY;
+
+		input_event(input, type, button->code,
+			    !!(state ^ button->active_low));
+		input_sync(input);
+		bdata->count = 0;
+		bdata->last_state = state;
+	}
+}
+
+static void gpio_keys_polled_poll(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+	struct input_dev *input = dev->input;
+	int i;
+
+	for (i = 0; i < bdev->pdata->nbuttons; i++) {
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+		if (bdata->count < bdata->threshold)
+			bdata->count++;
+		else
+			gpio_keys_polled_check_state(input, &pdata->buttons[i],
+						     bdata);
+	}
+}
+
+static void gpio_keys_polled_open(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->enable)
+		pdata->enable(bdev->dev);
+}
+
+static void gpio_keys_polled_close(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->disable)
+		pdata->disable(bdev->dev);
+}
+
+static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
+{
+	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct gpio_keys_polled_dev *bdev;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	int error;
+	int i;
+
+	if (!pdata || !pdata->poll_interval)
+		return -EINVAL;
+
+	bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
+		       pdata->nbuttons * sizeof(struct gpio_keys_button_data),
+		       GFP_KERNEL);
+	if (!bdev) {
+		dev_err(dev, "no memory for private data\n");
+		return -ENOMEM;
+	}
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		dev_err(dev, "no memory for polled device\n");
+		error = -ENOMEM;
+		goto err_free_bdev;
+	}
+
+	poll_dev->private = bdev;
+	poll_dev->poll = gpio_keys_polled_poll;
+	poll_dev->poll_interval = pdata->poll_interval;
+	poll_dev->open = gpio_keys_polled_open;
+	poll_dev->close = gpio_keys_polled_close;
+
+	input = poll_dev->input;
+
+	input->evbit[0] = BIT(EV_KEY);
+	input->name = pdev->name;
+	input->phys = DRV_NAME"/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_keys_button *button = &pdata->buttons[i];
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+		unsigned int gpio = button->gpio;
+		unsigned int type = button->type ?: EV_KEY;
+
+		if (button->wakeup) {
+			dev_err(dev, DRV_NAME " does not support wakeup\n");
+			error = -EINVAL;
+			goto err_free_gpio;
+		}
+
+		error = gpio_request(gpio,
+				     button->desc ? button->desc : DRV_NAME);
+		if (error) {
+			dev_err(dev, "unable to claim gpio %u, err=%d\n",
+				gpio, error);
+			goto err_free_gpio;
+		}
+
+		error = gpio_direction_input(gpio);
+		if (error) {
+			dev_err(dev,
+				"unable to set direction on gpio %u, err=%d\n",
+				gpio, error);
+			goto err_free_gpio;
+		}
+
+		bdata->can_sleep = gpio_cansleep(gpio);
+		bdata->last_state = -1;
+		bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+						pdata->poll_interval);
+
+		input_set_capability(input, type, button->code);
+	}
+
+	bdev->poll_dev = poll_dev;
+	bdev->dev = dev;
+	bdev->pdata = pdata;
+	platform_set_drvdata(pdev, bdev);
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		dev_err(dev, "unable to register polled device, err=%d\n",
+			error);
+		goto err_free_gpio;
+	}
+
+	/* report initial state of the buttons */
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_keys_polled_check_state(input, &pdata->buttons[i],
+					 &bdev->data[i]);
+
+	return 0;
+
+err_free_gpio:
+	while (--i >= 0)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(poll_dev);
+
+err_free_bdev:
+	kfree(bdev);
+
+	platform_set_drvdata(pdev, NULL);
+	return error;
+}
+
+static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
+{
+	struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+	int i;
+
+	input_unregister_polled_device(bdev->poll_dev);
+
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(bdev->poll_dev);
+
+	kfree(bdev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+	.probe	= gpio_keys_polled_probe,
+	.remove	= __devexit_p(gpio_keys_polled_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init gpio_keys_polled_init(void)
+{
+	return platform_driver_register(&gpio_keys_polled_driver);
+}
+
+static void __exit gpio_keys_polled_exit(void)
+{
+	platform_driver_unregister(&gpio_keys_polled_driver);
+}
+
+module_init(gpio_keys_polled_init);
+module_exit(gpio_keys_polled_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 613a3652f98f..0aefaa885871 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,7 +51,8 @@
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
-#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100100)
+#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
+#define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
 #define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
 
 /* synaptics modes query bits */
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 3c287dd879d3..4225f5d6b15f 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -358,7 +358,7 @@ static int __devinit gscps2_probe(struct parisc_device *dev)
 	gscps2_reset(ps2port);
 	ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f;
 
-	snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
+	snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
 		 (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
 	strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
 	serio->id.type		= SERIO_8042;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b3252ef1e279..4852b440960a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1436,6 +1436,12 @@ static struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
 static struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD8 =
+	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDA =
+	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDB =
+	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023, 63, BAMBOO_PT };
 
 #define USB_DEVICE_WACOM(prod)					\
 	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
@@ -1504,6 +1510,9 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xD1) },
 	{ USB_DEVICE_WACOM(0xD2) },
 	{ USB_DEVICE_WACOM(0xD3) },
+	{ USB_DEVICE_WACOM(0xD8) },
+	{ USB_DEVICE_WACOM(0xDA) },
+	{ USB_DEVICE_WACOM(0xDB) },
 	{ USB_DEVICE_WACOM(0xF0) },
 	{ USB_DEVICE_WACOM(0xCC) },
 	{ USB_DEVICE_WACOM(0x90) },
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index f45f80f6d336..73fd6642b681 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -178,6 +178,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 
 #ifdef CONFIG_TOUCHSCREEN_USB_ITM
 	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+	{USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 77b8fd20cd90..6f190f4cdbc0 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -7,20 +7,20 @@ menuconfig NEW_LEDS
 	  This is not related to standard keyboard LEDs which are controlled
 	  via the input system.
 
-if NEW_LEDS
-
 config LEDS_CLASS
 	bool "LED Class Support"
+	depends on NEW_LEDS
 	help
 	  This option enables the led sysfs class in /sys/class/leds.  You'll
 	  need this to do anything useful with LEDs.  If unsure, say N.
 
-if LEDS_CLASS
+if NEW_LEDS
 
 comment "LED drivers"
 
 config LEDS_88PM860X
 	tristate "LED Support for Marvell 88PM860x PMIC"
+	depends on LEDS_CLASS
 	depends on MFD_88PM860X
 	help
 	  This option enables support for on-chip LED drivers found on Marvell
@@ -28,6 +28,7 @@ config LEDS_88PM860X
 
 config LEDS_ATMEL_PWM
 	tristate "LED Support using Atmel PWM outputs"
+	depends on LEDS_CLASS
 	depends on ATMEL_PWM
 	help
 	  This option enables support for LEDs driven using outputs
@@ -35,6 +36,7 @@ config LEDS_ATMEL_PWM
 
 config LEDS_LOCOMO
 	tristate "LED Support for Locomo device"
+	depends on LEDS_CLASS
 	depends on SHARP_LOCOMO
 	help
 	  This option enables support for the LEDs on Sharp Locomo.
@@ -42,6 +44,7 @@ config LEDS_LOCOMO
 
 config LEDS_MIKROTIK_RB532
 	tristate "LED Support for Mikrotik Routerboard 532"
+	depends on LEDS_CLASS
 	depends on MIKROTIK_RB532
 	help
 	  This option enables support for the so called "User LED" of
@@ -49,6 +52,7 @@ config LEDS_MIKROTIK_RB532
 
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+	depends on LEDS_CLASS
 	depends on ARCH_S3C2410
 	help
 	  This option enables support for LEDs connected to GPIO lines
@@ -56,12 +60,14 @@ config LEDS_S3C24XX
 
 config LEDS_AMS_DELTA
 	tristate "LED Support for the Amstrad Delta (E3)"
+	depends on LEDS_CLASS
 	depends on MACH_AMS_DELTA
 	help
 	  This option enables support for the LEDs on Amstrad Delta (E3).
 
 config LEDS_NET48XX
 	tristate "LED Support for Soekris net48xx series Error LED"
+	depends on LEDS_CLASS
 	depends on SCx200_GPIO
 	help
 	  This option enables support for the Soekris net4801 and net4826 error
@@ -79,18 +85,21 @@ config LEDS_NET5501
 
 config LEDS_FSG
 	tristate "LED Support for the Freecom FSG-3"
+	depends on LEDS_CLASS
 	depends on MACH_FSG
 	help
 	  This option enables support for the LEDs on the Freecom FSG-3.
 
 config LEDS_WRAP
 	tristate "LED Support for the WRAP series LEDs"
+	depends on LEDS_CLASS
 	depends on SCx200_GPIO
 	help
 	  This option enables support for the PCEngines WRAP programmable LEDs.
 
 config LEDS_ALIX2
 	tristate "LED Support for ALIX.2 and ALIX.3 series"
+	depends on LEDS_CLASS
 	depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
 	help
 	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
@@ -98,12 +107,14 @@ config LEDS_ALIX2
 
 config LEDS_H1940
 	tristate "LED Support for iPAQ H1940 device"
+	depends on LEDS_CLASS
 	depends on ARCH_H1940
 	help
 	  This option enables support for the LEDs on the h1940.
 
 config LEDS_COBALT_QUBE
 	tristate "LED Support for the Cobalt Qube series front LED"
+	depends on LEDS_CLASS
 	depends on MIPS_COBALT
 	help
 	  This option enables support for the front LED on Cobalt Qube series
@@ -117,6 +128,7 @@ config LEDS_COBALT_RAQ
 
 config LEDS_SUNFIRE
 	tristate "LED support for SunFire servers."
+	depends on LEDS_CLASS
 	depends on SPARC64
 	select LEDS_TRIGGERS
 	help
@@ -125,6 +137,7 @@ config LEDS_SUNFIRE
 
 config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
+	depends on LEDS_CLASS
 	depends on SH_HP6XX
 	help
 	  This option enables LED support for the handheld
@@ -132,6 +145,7 @@ config LEDS_HP6XX
 
 config LEDS_PCA9532
 	tristate "LED driver for PCA9532 dimmer"
+	depends on LEDS_CLASS
 	depends on I2C && INPUT && EXPERIMENTAL
 	help
 	  This option enables support for NXP pca9532
@@ -140,6 +154,7 @@ config LEDS_PCA9532
 
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
+	depends on LEDS_CLASS
 	depends on GENERIC_GPIO
 	help
 	  This option enables support for the LEDs connected to GPIO
@@ -167,6 +182,7 @@ config LEDS_GPIO_OF
 
 config LEDS_LP3944
 	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+	depends on LEDS_CLASS
 	depends on I2C
 	help
 	  This option enables support for LEDs connected to the National
@@ -196,6 +212,7 @@ config LEDS_LP5523
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
+	depends on LEDS_CLASS
 	depends on X86 && SERIO_I8042 && DMI
 	help
 	  This driver makes the mail LED accessible from userspace
@@ -226,6 +243,7 @@ config LEDS_CLEVO_MAIL
 
 config LEDS_PCA955X
 	tristate "LED Support for PCA955x I2C chips"
+	depends on LEDS_CLASS
 	depends on I2C
 	help
 	  This option enables support for LEDs connected to PCA955x
@@ -234,6 +252,7 @@ config LEDS_PCA955X
 
 config LEDS_WM831X_STATUS
 	tristate "LED support for status LEDs on WM831x PMICs"
+	depends on LEDS_CLASS
 	depends on MFD_WM831X
 	help
 	  This option enables support for the status LEDs of the WM831x
@@ -241,6 +260,7 @@ config LEDS_WM831X_STATUS
 
 config LEDS_WM8350
 	tristate "LED Support for WM8350 AudioPlus PMIC"
+	depends on LEDS_CLASS
 	depends on MFD_WM8350
 	help
 	  This option enables support for LEDs driven by the Wolfson
@@ -248,6 +268,7 @@ config LEDS_WM8350
 
 config LEDS_DA903X
 	tristate "LED Support for DA9030/DA9034 PMIC"
+	depends on LEDS_CLASS
 	depends on PMIC_DA903X
 	help
 	  This option enables support for on-chip LED drivers found
@@ -255,6 +276,7 @@ config LEDS_DA903X
 
 config LEDS_DAC124S085
 	tristate "LED Support for DAC124S085 SPI DAC"
+	depends on LEDS_CLASS
 	depends on SPI
 	help
 	  This option enables support for DAC124S085 SPI DAC from NatSemi,
@@ -262,18 +284,21 @@ config LEDS_DAC124S085
 
 config LEDS_PWM
 	tristate "PWM driven LED Support"
+	depends on LEDS_CLASS
 	depends on HAVE_PWM
 	help
 	  This option enables support for pwm driven LEDs
 
 config LEDS_REGULATOR
 	tristate "REGULATOR driven LED support"
+	depends on LEDS_CLASS
 	depends on REGULATOR
 	help
 	  This option enables support for regulator driven LEDs.
 
 config LEDS_BD2802
 	tristate "LED driver for BD2802 RGB LED"
+	depends on LEDS_CLASS
 	depends on I2C
 	help
 	  This option enables support for BD2802GU RGB LED driver chips
@@ -281,6 +306,7 @@ config LEDS_BD2802
 
 config LEDS_INTEL_SS4200
 	tristate "LED driver for Intel NAS SS4200 series"
+	depends on LEDS_CLASS
 	depends on PCI && DMI
 	help
 	  This option enables support for the Intel SS4200 series of
@@ -290,6 +316,7 @@ config LEDS_INTEL_SS4200
 
 config LEDS_LT3593
 	tristate "LED driver for LT3593 controllers"
+	depends on LEDS_CLASS
 	depends on GENERIC_GPIO
 	help
 	  This option enables support for LEDs driven by a Linear Technology
@@ -298,6 +325,7 @@ config LEDS_LT3593
 
 config LEDS_ADP5520
 	tristate "LED Support for ADP5520/ADP5501 PMIC"
+	depends on LEDS_CLASS
 	depends on PMIC_ADP5520
 	help
 	  This option enables support for on-chip LED drivers found
@@ -308,6 +336,7 @@ config LEDS_ADP5520
 
 config LEDS_DELL_NETBOOKS
 	tristate "External LED on Dell Business Netbooks"
+	depends on LEDS_CLASS
 	depends on X86 && ACPI_WMI
 	help
 	  This adds support for the Latitude 2100 and similar
@@ -315,6 +344,7 @@ config LEDS_DELL_NETBOOKS
 
 config LEDS_MC13783
 	tristate "LED Support for MC13783 PMIC"
+	depends on LEDS_CLASS
 	depends on MFD_MC13783
 	help
 	  This option enable support for on-chip LED drivers found
@@ -322,6 +352,7 @@ config LEDS_MC13783
 
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
+	depends on LEDS_CLASS
 	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
 	default y
 	help
@@ -340,17 +371,17 @@ config LEDS_NETXBIG
 
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
+	depends on LEDS_CLASS
 	help
 	  This option enables trigger support for the leds class.
 	  These triggers allow kernel events to drive the LEDs and can
 	  be configured via sysfs. If unsure, say Y.
 
-if LEDS_TRIGGERS
-
 comment "LED Triggers"
 
 config LEDS_TRIGGER_TIMER
 	tristate "LED Timer Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a programmable timer
 	  via sysfs. Some LED hardware can be programmed to start
@@ -362,12 +393,14 @@ config LEDS_TRIGGER_TIMER
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
 	depends on IDE_GD_ATA
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by IDE disk activity.
 	  If unsure, say Y.
 
 config LEDS_TRIGGER_HEARTBEAT
 	tristate "LED Heartbeat Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a CPU load average.
 	  The flash frequency is a hyperbolic function of the 1-minute
@@ -376,6 +409,7 @@ config LEDS_TRIGGER_HEARTBEAT
 
 config LEDS_TRIGGER_BACKLIGHT
 	tristate "LED backlight Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled as a backlight device: they
 	  turn off and on when the display is blanked and unblanked.
@@ -384,6 +418,7 @@ config LEDS_TRIGGER_BACKLIGHT
 
 config LEDS_TRIGGER_GPIO
 	tristate "LED GPIO Trigger"
+	depends on LEDS_TRIGGERS
 	depends on GPIOLIB
 	help
 	  This allows LEDs to be controlled by gpio events. It's good
@@ -396,6 +431,7 @@ config LEDS_TRIGGER_GPIO
 
 config LEDS_TRIGGER_DEFAULT_ON
 	tristate "LED Default ON Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be initialised in the ON state.
 	  If unsure, say Y.
@@ -403,8 +439,4 @@ config LEDS_TRIGGER_DEFAULT_ON
 comment "iptables trigger is under Netfilter config (LED target)"
 	depends on LEDS_TRIGGERS
 
-endif # LEDS_TRIGGERS
-
-endif # LEDS_CLASS
-
 endif # NEW_LEDS
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3d7355ff7308..fa51af11c6f1 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -102,6 +102,7 @@ config ADB_PMU_LED
 config ADB_PMU_LED_IDE
 	bool "Use front LED as IDE LED by default"
 	depends on ADB_PMU_LED
+	depends on LEDS_CLASS
 	select LEDS_TRIGGERS
 	select LEDS_TRIGGER_IDE_DISK
 	help
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 2385e6cca635..78b089526e02 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -31,7 +31,7 @@ config MEDIA_TUNER
 	select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
 
-menuconfig MEDIA_TUNER_CUSTOMISE
+config MEDIA_TUNER_CUSTOMISE
 	bool "Customize analog and hybrid tuner modules to build"
 	depends on MEDIA_TUNER
 	default y if EMBEDDED
@@ -44,7 +44,8 @@ menuconfig MEDIA_TUNER_CUSTOMISE
 
 	  If unsure say N.
 
-if MEDIA_TUNER_CUSTOMISE
+menu "Customize TV tuners"
+	visible if MEDIA_TUNER_CUSTOMISE
 
 config MEDIA_TUNER_SIMPLE
 	tristate "Simple tuner support"
@@ -185,5 +186,4 @@ config MEDIA_TUNER_TDA18218
 	default m if MEDIA_TUNER_CUSTOMISE
 	help
 	  NXP TDA18218 silicon tuner driver.
-
-endif # MEDIA_TUNER_CUSTOMISE
+endmenu
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index e9062b08a485..96b27016670e 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -12,9 +12,8 @@ config DVB_FE_CUSTOMISE
 
 	  If unsure say N.
 
-if DVB_FE_CUSTOMISE
-
 menu "Customise DVB Frontends"
+	visible if DVB_FE_CUSTOMISE
 
 comment "Multistandard (satellite) frontends"
 	depends on DVB_CORE
@@ -619,5 +618,3 @@ config DVB_DUMMY_FE
 	tristate "Dummy frontend driver"
 	default n
 endmenu
-
-endif
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ac16e815e275..6830d2848bd7 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -112,7 +112,7 @@ config VIDEO_IR_I2C
 #
 
 menu "Encoders/decoders and other helper chips"
-	depends on !VIDEO_HELPER_CHIPS_AUTO
+	visible if !VIDEO_HELPER_CHIPS_AUTO
 
 comment "Audio decoders"
 
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index c2960ac9f39c..811775aa8ee8 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -482,10 +482,17 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 	uint32_t data = 0;
 	struct ubi_vid_hdr vid_hdr;
 
-	addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset;
+	/*
+	 * It is important to first invalidate the EC header, and then the VID
+	 * header. Otherwise a power cut may lead to valid EC header and
+	 * invalid VID header, in which case UBI will treat this PEB as
+	 * corrupted and will try to preserve it, and print scary warnings (see
+	 * the header comment in scan.c for more information).
+	 */
+	addr = (loff_t)pnum * ubi->peb_size;
 	err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
 	if (!err) {
-		addr -= ubi->vid_hdr_aloffset;
+		addr += ubi->vid_hdr_aloffset;
 		err = ubi->mtd->write(ubi->mtd, addr, 4, &written,
 				      (void *)&data);
 		if (!err)
@@ -494,18 +501,24 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 
 	/*
 	 * We failed to write to the media. This was observed with Spansion
-	 * S29GL512N NOR flash. Most probably the eraseblock erasure was
-	 * interrupted at a very inappropriate moment, so it became unwritable.
-	 * In this case we probably anyway have garbage in this PEB.
+	 * S29GL512N NOR flash. Most probably the previously eraseblock erasure
+	 * was interrupted at a very inappropriate moment, so it became
+	 * unwritable. In this case we probably anyway have garbage in this
+	 * PEB.
 	 */
 	err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
-	if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
-		/*
-		 * The VID header is corrupted, so we can safely erase this
-		 * PEB and not afraid that it will be treated as a valid PEB in
-		 * case of an unclean reboot.
-		 */
-		return 0;
+	if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR) {
+		struct ubi_ec_hdr ec_hdr;
+
+		err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+		if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
+			/*
+			 * Both VID and EC headers are corrupted, so we can
+			 * safely erase this PEB and not afraid that it will be
+			 * treated as a valid PEB in case of an unclean reboot.
+			 */
+			return 0;
+	}
 
 	/*
 	 * The PEB contains a valid VID header, but we cannot invalidate it.
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 204345be8e62..79ca304fc4db 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -953,6 +953,10 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			 * impossible to distinguish it from a PEB which just
 			 * contains garbage because of a power cut during erase
 			 * operation. So we just schedule this PEB for erasure.
+			 *
+			 * Besides, in case of NOR flash, we deliberatly
+			 * corrupt both headers because NOR flash erasure is
+			 * slow and can start from the end.
 			 */
 			err = 0;
 		else
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index d9f51485beee..9383063d2b16 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -349,7 +349,6 @@ static struct irq_chip dino_interrupt_type = {
 	.name	= "GSC-PCI",
 	.unmask	= dino_unmask_irq,
 	.mask	= dino_mask_irq,
-	.ack	= no_ack_irq,
 };
 
 
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 1211974f55aa..e860038b0b84 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -186,7 +186,6 @@ static struct irq_chip eisa_interrupt_type = {
 	.name	=	"EISA",
 	.unmask	=	eisa_unmask_irq,
 	.mask	=	eisa_mask_irq,
-	.ack	=	no_ack_irq,
 };
 
 static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
@@ -340,7 +339,7 @@ static int __init eisa_probe(struct parisc_device *dev)
 	setup_irq(2, &irq2_action);
 	for (i = 0; i < 16; i++) {
 		set_irq_chip_and_handler(i, &eisa_interrupt_type,
-			handle_level_irq);
+					 handle_simple_irq);
 	}
 	
 	EISA_bus = 1;
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index e605298e3aee..772b1939ac21 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -143,7 +143,6 @@ static struct irq_chip gsc_asic_interrupt_type = {
 	.name	=	"GSC-ASIC",
 	.unmask	=	gsc_asic_unmask_irq,
 	.mask	=	gsc_asic_mask_irq,
-	.ack	=	no_ack_irq,
 };
 
 int gsc_assign_irq(struct irq_chip *type, void *data)
@@ -153,7 +152,7 @@ int gsc_assign_irq(struct irq_chip *type, void *data)
 	if (irq > GSC_IRQ_MAX)
 		return NO_IRQ;
 
-	set_irq_chip_and_handler(irq, type, handle_level_irq);
+	set_irq_chip_and_handler(irq, type, handle_simple_irq);
 	set_irq_chip_data(irq, data);
 
 	return irq++;
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index a3120a09c43d..0327894bf235 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -669,6 +669,13 @@ printk("\n");
 	DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq,
 			vi->eoi_addr, vi->eoi_data);
 	iosapic_eoi(vi->eoi_addr, vi->eoi_data);
+}
+
+static void iosapic_eoi_irq(unsigned int irq)
+{
+	struct vector_info *vi = get_irq_chip_data(irq);
+
+	iosapic_eoi(vi->eoi_addr, vi->eoi_data);
 	cpu_eoi_irq(irq);
 }
 
@@ -705,6 +712,7 @@ static struct irq_chip iosapic_interrupt_type = {
 	.unmask	=	iosapic_unmask_irq,
 	.mask	=	iosapic_mask_irq,
 	.ack	=	cpu_ack_irq,
+	.eoi	=	iosapic_eoi_irq,
 #ifdef CONFIG_SMP
 	.set_affinity =	iosapic_set_affinity_irq,
 #endif
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 2350e8a86eef..f2f501e5b6a0 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -64,6 +64,7 @@ static unsigned int led_diskio    __read_mostly = 1;
 static unsigned int led_lanrxtx   __read_mostly = 1;
 static char lcd_text[32]          __read_mostly;
 static char lcd_text_default[32]  __read_mostly;
+static int  lcd_no_led_support    __read_mostly = 0; /* KittyHawk doesn't support LED on its LCD */
 
 
 static struct workqueue_struct *led_wq;
@@ -115,7 +116,7 @@ lcd_info __attribute__((aligned(8))) __read_mostly =
 	.lcd_width =		16,
 	.lcd_cmd_reg_addr =	KITTYHAWK_LCD_CMD,
 	.lcd_data_reg_addr =	KITTYHAWK_LCD_DATA,
-	.min_cmd_delay =	40,
+	.min_cmd_delay =	80,
 	.reset_cmd1 =		0x80,
 	.reset_cmd2 =		0xc0,
 };
@@ -135,6 +136,9 @@ static int start_task(void)
 	/* Display the default text now */
 	if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
 
+	/* KittyHawk has no LED support on its LCD */
+	if (lcd_no_led_support) return 0;
+
 	/* Create the work queue and queue the LED task */
 	led_wq = create_singlethread_workqueue("led_wq");	
 	queue_delayed_work(led_wq, &led_task, 0);
@@ -248,9 +252,13 @@ static int __init led_create_procfs(void)
 
 	proc_pdc_root = proc_mkdir("pdc", 0);
 	if (!proc_pdc_root) return -1;
-	ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
-				&led_proc_fops, (void *)LED_NOLCD); /* LED */
-	if (!ent) return -1;
+
+	if (!lcd_no_led_support)
+	{
+		ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
+					&led_proc_fops, (void *)LED_NOLCD); /* LED */
+		if (!ent) return -1;
+	}
 
 	if (led_type == LED_HASLCD)
 	{
@@ -692,6 +700,7 @@ int __init led_init(void)
 	case 0x58B:		/* KittyHawk DC2 100 (K200) */
 		printk(KERN_INFO "%s: KittyHawk-Machine (hversion 0x%x) found, "
 				"LED detection skipped.\n", __FILE__, CPU_HVERSION);
+		lcd_no_led_support = 1;
 		goto found;	/* use the preinitialized values of lcd_info */
 	}
 
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 0846dafdfff1..28241532c0fd 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -323,7 +323,6 @@ static struct irq_chip superio_interrupt_type = {
 	.name	=	SUPERIO,
 	.unmask	=	superio_unmask_irq,
 	.mask	=	superio_mask_irq,
-	.ack =		no_ack_irq,
 };
 
 #ifdef DEBUG_SUPERIO_INIT
@@ -354,7 +353,7 @@ int superio_fixup_irq(struct pci_dev *pcidev)
 #endif
 
 	for (i = 0; i < 16; i++) {
-		set_irq_chip_and_handler(i, &superio_interrupt_type, handle_level_irq);
+		set_irq_chip_and_handler(i, &superio_interrupt_type, handle_simple_irq);
 	}
 
 	/*
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 3753fd0722e7..2fe8cb8e95cd 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -70,6 +70,7 @@ void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
 		va_end(args);
 	}
 }
+EXPORT_SYMBOL(soc_pcmcia_debug);
 
 #endif
 
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 60a5a5c6b50a..d235f44fd7a3 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -81,6 +81,8 @@ MODULE_PARM_DESC(wapf, "WAPF value");
 
 static int wlan_status = 1;
 static int bluetooth_status = 1;
+static int wimax_status = -1;
+static int wwan_status = -1;
 
 module_param(wlan_status, int, 0444);
 MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
@@ -92,6 +94,16 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
 		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
 		 "default is 1");
 
+module_param(wimax_status, int, 0444);
+MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is 1");
+
+module_param(wwan_status, int, 0444);
+MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is 1");
+
 /*
  * Some events we use, same for all Asus
  */
@@ -114,6 +126,8 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
  */
 #define WL_RSTS		0x01	/* internal Wifi */
 #define BT_RSTS		0x02	/* internal Bluetooth */
+#define WM_RSTS		0x08    /* internal wimax */
+#define WW_RSTS		0x20    /* internal wwan */
 
 /* LED */
 #define METHOD_MLED		"MLED"
@@ -132,6 +146,11 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
  */
 #define METHOD_WLAN		"WLED"
 #define METHOD_BLUETOOTH	"BLED"
+
+/* WWAN and WIMAX */
+#define METHOD_WWAN		"GSMC"
+#define METHOD_WIMAX		"WMXC"
+
 #define METHOD_WL_STATUS	"RSTS"
 
 /* Brightness */
@@ -883,6 +902,64 @@ static ssize_t store_bluetooth(struct device *dev,
 }
 
 /*
+ * Wimax
+ */
+static int asus_wimax_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
+		pr_warning("Error setting wimax status to %d", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t show_wimax(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS));
+}
+
+static ssize_t store_wimax(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX);
+}
+
+/*
+ * Wwan
+ */
+static int asus_wwan_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
+		pr_warning("Error setting wwan status to %d", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t show_wwan(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS));
+}
+
+static ssize_t store_wwan(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_WWAN);
+}
+
+/*
  * Display
  */
 static void asus_set_display(struct asus_laptop *asus, int value)
@@ -1202,6 +1279,8 @@ static DEVICE_ATTR(infos, S_IRUGO, show_infos, NULL);
 static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan);
 static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR,
 		   show_bluetooth, store_bluetooth);
+static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax);
+static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan);
 static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp);
 static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd);
 static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl);
@@ -1212,6 +1291,8 @@ static struct attribute *asus_attributes[] = {
 	&dev_attr_infos.attr,
 	&dev_attr_wlan.attr,
 	&dev_attr_bluetooth.attr,
+	&dev_attr_wimax.attr,
+	&dev_attr_wwan.attr,
 	&dev_attr_display.attr,
 	&dev_attr_ledd.attr,
 	&dev_attr_ls_level.attr,
@@ -1239,6 +1320,13 @@ static mode_t asus_sysfs_is_visible(struct kobject *kobj,
 	} else if (attr == &dev_attr_display.attr) {
 		supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL);
 
+	} else if (attr == &dev_attr_wimax.attr) {
+		supported =
+			!acpi_check_handle(asus->handle, METHOD_WIMAX, NULL);
+
+	} else if (attr == &dev_attr_wwan.attr) {
+		supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL);
+
 	} else if (attr == &dev_attr_ledd.attr) {
 		supported = !acpi_check_handle(handle, METHOD_LEDD, NULL);
 
@@ -1397,7 +1485,8 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 
 	/*
 	 * The HWRS method return informations about the hardware.
-	 * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+	 * 0x80 bit is for WLAN, 0x100 for Bluetooth,
+	 * 0x40 for WWAN, 0x10 for WIMAX.
 	 * The significance of others is yet to be found.
 	 */
 	status =
@@ -1440,6 +1529,12 @@ static int __devinit asus_acpi_init(struct asus_laptop *asus)
 	if (wlan_status >= 0)
 		asus_wlan_set(asus, !!wlan_status);
 
+	if (wimax_status >= 0)
+		asus_wimax_set(asus, !!wimax_status);
+
+	if (wwan_status >= 0)
+		asus_wwan_set(asus, !!wwan_status);
+
 	/* Keyboard Backlight is on by default */
 	if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL))
 		asus_kled_set(asus, 1);
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 462ceab93f87..0d50fbbe2478 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -298,8 +298,8 @@ static void eeepc_wmi_notify(u32 value, void *context)
 	kfree(obj);
 }
 
-static int store_cpufv(struct device *dev, struct device_attribute *attr,
-		       const char *buf, size_t count)
+static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
 {
 	int value;
 	struct acpi_buffer input = { (acpi_size)sizeof(value), &value };
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1dac659b5e0c..9e05af9c41cb 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -172,6 +172,8 @@ static int hp_wmi_perform_query(int query, int write, u32 *buffer,
 	bios_return = *((struct bios_return *)obj->buffer.pointer);
 
 	memcpy(buffer, &bios_return.value, sizeof(bios_return.value));
+
+	kfree(obj);
 	return 0;
 }
 
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index 3c2c6b91ecb3..94a114aa8e28 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 #include <linux/dmi.h>
+#include <linux/efi.h>
 #include <linux/mutex.h>
 #include <asm/bios_ebda.h>
 
@@ -220,32 +221,13 @@ static void rtl_teardown_sysfs(void) {
 	sysdev_class_unregister(&class_rtl);
 }
 
-static int dmi_check_cb(const struct dmi_system_id *id)
-{
-	RTL_DEBUG("found IBM server '%s'\n", id->ident);
-	return 0;
-}
-
-#define ibm_dmi_entry(NAME, TYPE)                  \
-{                                                  \
-	.ident = NAME,                             \
-	.matches = {                               \
-		DMI_MATCH(DMI_SYS_VENDOR, "IBM"),  \
-		DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \
-	},                                         \
-	.callback = dmi_check_cb                   \
-}
 
 static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = {
-	ibm_dmi_entry("BladeCenter LS21", "7971"),
-	ibm_dmi_entry("BladeCenter LS22", "7901"),
-	ibm_dmi_entry("BladeCenter HS21 XM", "7995"),
-	ibm_dmi_entry("BladeCenter HS22", "7870"),
-	ibm_dmi_entry("BladeCenter HS22V", "7871"),
-	ibm_dmi_entry("System x3550 M2", "7946"),
-	ibm_dmi_entry("System x3650 M2", "7947"),
-	ibm_dmi_entry("System x3550 M3", "7944"),
-	ibm_dmi_entry("System x3650 M3", "7945"),
+	{                                                  \
+		.matches = {                               \
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),  \
+		},                                         \
+	},
 	{ }
 };
 
@@ -257,7 +239,7 @@ static int __init ibm_rtl_init(void) {
 	if (force)
 		pr_warning("ibm-rtl: module loaded by force\n");
 	/* first ensure that we are running on IBM HW */
-	else if (!dmi_check_system(ibm_rtl_dmi_table))
+	else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
 		return -ENODEV;
 
 	/* Get the address for the Extended BIOS Data Area */
@@ -302,7 +284,7 @@ static int __init ibm_rtl_init(void) {
 			RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
 			      rtl_cmd_width, rtl_cmd_type);
 			addr = ioread32(&rtl_table->cmd_port_address);
-			RTL_DEBUG("addr = %#llx\n", addr);
+			RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
 			plen = rtl_cmd_width/sizeof(char);
 			rtl_cmd_addr = rtl_port_map(addr, plen);
 			RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 42a5469a2459..35278ad7e628 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -43,16 +43,18 @@ MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2");
 
 #define dprintk(msg...) pr_debug(DRV_PFX msg)
 
-#define KEYCODE_BASE 0xD0
-#define MSI_WMI_BRIGHTNESSUP   KEYCODE_BASE
-#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1)
-#define MSI_WMI_VOLUMEUP       (KEYCODE_BASE + 2)
-#define MSI_WMI_VOLUMEDOWN     (KEYCODE_BASE + 3)
+#define SCANCODE_BASE 0xD0
+#define MSI_WMI_BRIGHTNESSUP   SCANCODE_BASE
+#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
+#define MSI_WMI_VOLUMEUP       (SCANCODE_BASE + 2)
+#define MSI_WMI_VOLUMEDOWN     (SCANCODE_BASE + 3)
+#define MSI_WMI_MUTE           (SCANCODE_BASE + 4)
 static struct key_entry msi_wmi_keymap[] = {
 	{ KE_KEY, MSI_WMI_BRIGHTNESSUP,   {KEY_BRIGHTNESSUP} },
 	{ KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} },
 	{ KE_KEY, MSI_WMI_VOLUMEUP,       {KEY_VOLUMEUP} },
 	{ KE_KEY, MSI_WMI_VOLUMEDOWN,     {KEY_VOLUMEDOWN} },
+	{ KE_KEY, MSI_WMI_MUTE,           {KEY_MUTE} },
 	{ KE_END, 0}
 };
 static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
@@ -169,7 +171,7 @@ static void msi_wmi_notify(u32 value, void *context)
 			ktime_t diff;
 			cur = ktime_get_real();
 			diff = ktime_sub(cur, last_pressed[key->code -
-					KEYCODE_BASE]);
+					SCANCODE_BASE]);
 			/* Ignore event if the same event happened in a 50 ms
 			   timeframe -> Key press may result in 10-20 GPEs */
 			if (ktime_to_us(diff) < 1000 * 50) {
@@ -178,7 +180,7 @@ static void msi_wmi_notify(u32 value, void *context)
 					 key->code, ktime_to_us(diff));
 				return;
 			}
-			last_pressed[key->code - KEYCODE_BASE] = cur;
+			last_pressed[key->code - SCANCODE_BASE] = cur;
 
 			if (key->type == KE_KEY &&
 			/* Brightness is served via acpi video driver */
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2d61186ad5a2..e8c21994b36d 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8497,7 +8497,6 @@ static void ibm_exit(struct ibm_struct *ibm)
 					   ibm->acpi->type,
 					   dispatch_acpi_notify);
 		ibm->flags.acpi_notify_installed = 0;
-		ibm->flags.acpi_notify_installed = 0;
 	}
 
 	if (ibm->flags.proc_created) {
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 06f304f46e02..4276da7291b8 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -135,6 +135,7 @@ static const struct key_entry toshiba_acpi_keymap[] __initconst = {
 	{ KE_KEY, 0x141, { KEY_BRIGHTNESSUP } },
 	{ KE_KEY, 0x142, { KEY_WLAN } },
 	{ KE_KEY, 0x143, { KEY_PROG1 } },
+	{ KE_KEY, 0x17f, { KEY_FN } },
 	{ KE_KEY, 0xb05, { KEY_PROG2 } },
 	{ KE_KEY, 0xb06, { KEY_WWW } },
 	{ KE_KEY, 0xb07, { KEY_MAIL } },
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 104b77c87ef5..aecd9a9b549f 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -755,7 +755,7 @@ static bool guid_already_parsed(const char *guid_string)
 	struct wmi_block *wblock;
 
 	list_for_each_entry(wblock, &wmi_block_list, list)
-		if (strncmp(wblock->gblock.guid, guid_string, 16) == 0)
+		if (memcmp(wblock->gblock.guid, guid_string, 16) == 0)
 			return true;
 
 	return false;
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index a5050e217150..825951b6b83f 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -635,7 +635,7 @@ static void css_process_crw(struct crw *crw0, struct crw *crw1, int overflow)
 	init_subchannel_id(&mchk_schid);
 	mchk_schid.sch_no = crw0->rsid;
 	if (crw1)
-		mchk_schid.ssid = (crw1->rsid >> 8) & 3;
+		mchk_schid.ssid = (crw1->rsid >> 4) & 3;
 
 	/*
 	 * Since we are always presented with IPI in the CRW, we have to
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index cad7d45c8bac..c265aed09e04 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1029,10 +1029,6 @@ static int __init fb_probe(struct platform_device *device)
 		goto err_release_pl_mem;
 	}
 
-	ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
-	if (ret)
-		goto err_release_pl_mem;
-
 	/* Initialize par */
 	da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp;
 
@@ -1060,7 +1056,7 @@ static int __init fb_probe(struct platform_device *device)
 
 	ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
 	if (ret)
-		goto err_free_irq;
+		goto err_release_pl_mem;
 	da8xx_fb_info->cmap.len = par->palette_sz;
 
 	/* initialize var_screeninfo */
@@ -1088,8 +1084,13 @@ static int __init fb_probe(struct platform_device *device)
 		goto err_cpu_freq;
 	}
 #endif
+
+	ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+	if (ret)
+		goto irq_freq;
 	return 0;
 
+irq_freq:
 #ifdef CONFIG_CPU_FREQ
 err_cpu_freq:
 	unregister_framebuffer(da8xx_fb_info);
@@ -1098,9 +1099,6 @@ err_cpu_freq:
 err_dealloc_cmap:
 	fb_dealloc_cmap(&da8xx_fb_info->cmap);
 
-err_free_irq:
-	free_irq(par->irq, par);
-
 err_release_pl_mem:
 	dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
 			  par->p_palette_base);
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index affdf3e32cf3..5c3960da755a 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -80,6 +80,7 @@ static const struct fb_cmap default_16_colors = {
  *	@cmap: frame buffer colormap structure
  *	@len: length of @cmap
  *	@transp: boolean, 1 if there is transparency, 0 otherwise
+ *	@flags: flags for kmalloc memory allocation
  *
  *	Allocates memory for a colormap @cmap.  @len is the
  *	number of entries in the palette.
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index e4c4d89b7860..be8ccb47ebe0 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -22,6 +22,7 @@
 #define DC_HFILT_COUNT	0x100
 #define DC_VFILT_COUNT	0x100
 #define VP_COEFF_SIZE	0x1000
+#define VP_PAL_COUNT	0x100
 
 #define OUTPUT_CRT   0x01
 #define OUTPUT_PANEL 0x02
@@ -48,7 +49,8 @@ struct lxfb_par {
 	uint64_t vp[VP_REG_COUNT];
 	uint64_t fp[FP_REG_COUNT];
 
-	uint32_t pal[DC_PAL_COUNT];
+	uint32_t dc_pal[DC_PAL_COUNT];
+	uint32_t vp_pal[VP_PAL_COUNT];
 	uint32_t hcoeff[DC_HFILT_COUNT * 2];
 	uint32_t vcoeff[DC_VFILT_COUNT];
 	uint32_t vp_coeff[VP_COEFF_SIZE / 4];
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 85ec7f64c42a..79e9abc72b83 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -610,10 +610,15 @@ static void lx_save_regs(struct lxfb_par *par)
 	memcpy(par->vp, par->vp_regs, sizeof(par->vp));
 	memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
 
-	/* save the palette */
+	/* save the display controller palette */
 	write_dc(par, DC_PAL_ADDRESS, 0);
-	for (i = 0; i < ARRAY_SIZE(par->pal); i++)
-		par->pal[i] = read_dc(par, DC_PAL_DATA);
+	for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+		par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
+
+	/* save the video processor palette */
+	write_vp(par, VP_PAR, 0);
+	for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+		par->vp_pal[i] = read_vp(par, VP_PDR);
 
 	/* save the horizontal filter coefficients */
 	filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -706,8 +711,8 @@ static void lx_restore_display_ctlr(struct lxfb_par *par)
 
 	/* restore the palette */
 	write_dc(par, DC_PAL_ADDRESS, 0);
-	for (i = 0; i < ARRAY_SIZE(par->pal); i++)
-		write_dc(par, DC_PAL_DATA, par->pal[i]);
+	for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+		write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
 
 	/* restore the horizontal filter coefficients */
 	filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -751,6 +756,11 @@ static void lx_restore_video_proc(struct lxfb_par *par)
 		}
 	}
 
+	/* restore video processor palette */
+	write_vp(par, VP_PAR, 0);
+	for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+		write_vp(par, VP_PDR, par->vp_pal[i]);
+
 	/* restore video coeff ram */
 	memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
 }
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 2b17ad5b4b32..43f9f02c7db0 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -412,8 +412,16 @@ static int __init balloon_init(void)
 
 	register_balloon(&balloon_sysdev);
 
-	/* Initialise the balloon with excess memory space. */
-	extra_pfn_end = min(e820_end_of_ram_pfn(),
+	/*
+	 * Initialise the balloon with excess memory space.  We need
+	 * to make sure we don't add memory which doesn't exist or
+	 * logically exist.  The E820 map can be trimmed to be smaller
+	 * than the amount of physical memory due to the mem= command
+	 * line parameter.  And if this is a 32-bit non-HIGHMEM kernel
+	 * on a system with memory which requires highmem to access,
+	 * don't try to use it.
+	 */
+	extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
 			    (unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
 	for (pfn = PFN_UP(xen_extra_mem_start);
 	     pfn < extra_pfn_end;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 2811bb988ea0..31af0ac31a98 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -105,7 +105,6 @@ struct irq_info
 
 static struct irq_info *irq_info;
 static int *pirq_to_irq;
-static int nr_pirqs;
 
 static int *evtchn_to_irq;
 struct cpu_evtchn_s {
@@ -385,12 +384,17 @@ static int get_nr_hw_irqs(void)
 	return ret;
 }
 
-/* callers of this function should make sure that PHYSDEVOP_get_nr_pirqs
- * succeeded otherwise nr_pirqs won't hold the right value */
-static int find_unbound_pirq(void)
+static int find_unbound_pirq(int type)
 {
-	int i;
-	for (i = nr_pirqs-1; i >= 0; i--) {
+	int rc, i;
+	struct physdev_get_free_pirq op_get_free_pirq;
+	op_get_free_pirq.type = type;
+
+	rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_free_pirq, &op_get_free_pirq);
+	if (!rc)
+		return op_get_free_pirq.pirq;
+
+	for (i = 0; i < nr_irqs; i++) {
 		if (pirq_to_irq[i] < 0)
 			return i;
 	}
@@ -423,7 +427,7 @@ static int find_unbound_irq(void)
 	if (irq == start)
 		goto no_irqs;
 
-	res = irq_alloc_desc_at(irq, 0);
+	res = irq_alloc_desc_at(irq, -1);
 
 	if (WARN_ON(res != irq))
 		return -1;
@@ -611,10 +615,10 @@ int xen_map_pirq_gsi(unsigned pirq, unsigned gsi, int shareable, char *name)
 
 	spin_lock(&irq_mapping_update_lock);
 
-	if ((pirq > nr_pirqs) || (gsi > nr_irqs)) {
+	if ((pirq > nr_irqs) || (gsi > nr_irqs)) {
 		printk(KERN_WARNING "xen_map_pirq_gsi: %s %s is incorrect!\n",
-			pirq > nr_pirqs ? "nr_pirqs" :"",
-			gsi > nr_irqs ? "nr_irqs" : "");
+			pirq > nr_irqs ? "pirq" :"",
+			gsi > nr_irqs ? "gsi" : "");
 		goto out;
 	}
 
@@ -630,7 +634,7 @@ int xen_map_pirq_gsi(unsigned pirq, unsigned gsi, int shareable, char *name)
 	if (identity_mapped_irq(gsi) || (!xen_initial_domain() &&
 				xen_pv_domain())) {
 		irq = gsi;
-		irq_alloc_desc_at(irq, 0);
+		irq_alloc_desc_at(irq, -1);
 	} else
 		irq = find_unbound_irq();
 
@@ -664,17 +668,21 @@ out:
 #include <linux/msi.h>
 #include "../pci/msi.h"
 
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc)
 {
 	spin_lock(&irq_mapping_update_lock);
 
-	*irq = find_unbound_irq();
-	if (*irq == -1)
-		goto out;
+	if (alloc & XEN_ALLOC_IRQ) {
+		*irq = find_unbound_irq();
+		if (*irq == -1)
+			goto out;
+	}
 
-	*pirq = find_unbound_pirq();
-	if (*pirq == -1)
-		goto out;
+	if (alloc & XEN_ALLOC_PIRQ) {
+		*pirq = find_unbound_pirq(MAP_PIRQ_TYPE_MSI);
+		if (*pirq == -1)
+			goto out;
+	}
 
 	set_irq_chip_and_handler_name(*irq, &xen_pirq_chip,
 				      handle_level_irq, name);
@@ -762,6 +770,7 @@ int xen_destroy_irq(int irq)
 			printk(KERN_WARNING "unmap irq failed %d\n", rc);
 			goto out;
 		}
+		pirq_to_irq[info->u.pirq.pirq] = -1;
 	}
 	irq_info[irq] = mk_unbound_info();
 
@@ -782,6 +791,11 @@ int xen_gsi_from_irq(unsigned irq)
 	return gsi_from_irq(irq);
 }
 
+int xen_irq_from_pirq(unsigned pirq)
+{
+	return pirq_to_irq[pirq];
+}
+
 int bind_evtchn_to_irq(unsigned int evtchn)
 {
 	int irq;
@@ -1279,6 +1293,42 @@ static int retrigger_dynirq(unsigned int irq)
 	return ret;
 }
 
+static void restore_cpu_pirqs(void)
+{
+	int pirq, rc, irq, gsi;
+	struct physdev_map_pirq map_irq;
+
+	for (pirq = 0; pirq < nr_irqs; pirq++) {
+		irq = pirq_to_irq[pirq];
+		if (irq == -1)
+			continue;
+
+		/* save/restore of PT devices doesn't work, so at this point the
+		 * only devices present are GSI based emulated devices */
+		gsi = gsi_from_irq(irq);
+		if (!gsi)
+			continue;
+
+		map_irq.domid = DOMID_SELF;
+		map_irq.type = MAP_PIRQ_TYPE_GSI;
+		map_irq.index = gsi;
+		map_irq.pirq = pirq;
+
+		rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+		if (rc) {
+			printk(KERN_WARNING "xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n",
+					gsi, irq, pirq, rc);
+			irq_info[irq] = mk_unbound_info();
+			pirq_to_irq[pirq] = -1;
+			continue;
+		}
+
+		printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
+
+		startup_pirq(irq);
+	}
+}
+
 static void restore_cpu_virqs(unsigned int cpu)
 {
 	struct evtchn_bind_virq bind_virq;
@@ -1422,6 +1472,8 @@ void xen_irq_resume(void)
 
 		unmask_evtchn(evtchn);
 	}
+
+	restore_cpu_pirqs();
 }
 
 static struct irq_chip xen_dynamic_chip __read_mostly = {
@@ -1506,26 +1558,17 @@ void xen_callback_vector(void) {}
 
 void __init xen_init_IRQ(void)
 {
-	int i, rc;
-	struct physdev_nr_pirqs op_nr_pirqs;
+	int i;
 
 	cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
 				    GFP_KERNEL);
 	irq_info = kcalloc(nr_irqs, sizeof(*irq_info), GFP_KERNEL);
 
-	rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_nr_pirqs, &op_nr_pirqs);
-	if (rc < 0) {
-		nr_pirqs = nr_irqs;
-		if (rc != -ENOSYS)
-			printk(KERN_WARNING "PHYSDEVOP_get_nr_pirqs returned rc=%d\n", rc);
-	} else {
-		if (xen_pv_domain() && !xen_initial_domain())
-			nr_pirqs = max((int)op_nr_pirqs.nr_pirqs, nr_irqs);
-		else
-			nr_pirqs = op_nr_pirqs.nr_pirqs;
-	}
-	pirq_to_irq = kcalloc(nr_pirqs, sizeof(*pirq_to_irq), GFP_KERNEL);
-	for (i = 0; i < nr_pirqs; i++)
+	/* We are using nr_irqs as the maximum number of pirq available but
+	 * that number is actually chosen by Xen and we don't know exactly
+	 * what it is. Be careful choosing high pirq numbers. */
+	pirq_to_irq = kcalloc(nr_irqs, sizeof(*pirq_to_irq), GFP_KERNEL);
+	for (i = 0; i < nr_irqs; i++)
 		pirq_to_irq[i] = -1;
 
 	evtchn_to_irq = kcalloc(NR_EVENT_CHANNELS, sizeof(*evtchn_to_irq),
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index ef9c7db52077..db8c4c4ac880 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -49,6 +49,7 @@ static int xen_hvm_suspend(void *data)
 
 	if (!*cancelled) {
 		xen_irq_resume();
+		xen_console_resume();
 		xen_timer_resume();
 	}