summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>2012-09-05 16:35:20 -0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-09-14 10:00:33 -0700
commitbbebafa0d9507206793a05fbeb010eafb1fdb0d0 (patch)
treef97c78c97a495081de59374d803bf1e5d2999853 /drivers
parent095ac020be339cad6f158508cc3b9f740c60b53a (diff)
downloadlwn-bbebafa0d9507206793a05fbeb010eafb1fdb0d0.tar.gz
lwn-bbebafa0d9507206793a05fbeb010eafb1fdb0d0.zip
xen/pciback: Fix proper FLR steps.
commit 80ba77dfbce85f2d1be54847de3c866de1b18a9a upstream. When we do FLR and save PCI config we did it in the wrong order. The end result was that if a PCI device was unbind from its driver, then binded to xen-pciback, and then back to its driver we would get: > lspci -s 04:00.0 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 13:42:12 # 4 :~/ > echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind > modprobe e1000e e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s L1 e1000e 0000:04:00.0: enabling device (0000 -> 0002) xen: registering gsi 48 triggering 0 polarity 1 Already setup the GSI :48 e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: probe of 0000:04:00.0 failed with error -2 This fixes it by first saving the PCI configuration space, then doing the FLR. Reported-by: Ren, Yongjie <yongjie.ren@intel.com> Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/xen/xen-pciback/pci_stub.c8
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 097e536e8672..03342728bf23 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -353,16 +353,16 @@ static int __devinit pcistub_init_device(struct pci_dev *dev)
if (err)
goto config_release;
- dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
- __pci_reset_function_locked(dev);
-
/* We need the device active to save the state. */
dev_dbg(&dev->dev, "save state of device\n");
pci_save_state(dev);
dev_data->pci_saved_state = pci_store_saved_state(dev);
if (!dev_data->pci_saved_state)
dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
-
+ else {
+ dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
+ __pci_reset_function_locked(dev);
+ }
/* Now disable the device (this also ensures some private device
* data is setup before we export)
*/