video: move fbdev to drivers/video/fbdev

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 0 insertions, 121 deletions

diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
deleted file mode 100644
index dde4281663b1..000000000000
--- a/drivers/video/omap2/dss/Kconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-menuconfig OMAP2_DSS
-        tristate "OMAP2+ Display Subsystem support"
-	select VIDEOMODE_HELPERS
-        help
-	  OMAP2+ Display Subsystem support.
-
-if OMAP2_DSS
-
-config OMAP2_DSS_DEBUG
-	bool "Debug support"
-	default n
-	help
-	  This enables printing of debug messages. Alternatively, debug messages
-	  can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting
-	  appropriate flags in <debugfs>/dynamic_debug/control.
-
-config OMAP2_DSS_DEBUGFS
-	bool "Debugfs filesystem support"
-	depends on DEBUG_FS
-	default n
-	help
-	  This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables
-	  querying about clock configuration and register configuration of dss,
-	  dispc, dsi, hdmi and rfbi.
-
-config OMAP2_DSS_COLLECT_IRQ_STATS
-	bool "Collect DSS IRQ statistics"
-	depends on OMAP2_DSS_DEBUGFS
-	default n
-	help
-	  Collect DSS IRQ statistics, printable via debugfs.
-
-	  The statistics can be found from
-	  <debugfs>/omapdss/dispc_irq for DISPC interrupts, and
-	  <debugfs>/omapdss/dsi_irq for DSI interrupts.
-
-config OMAP2_DSS_DPI
-	bool "DPI support"
-	default y
-	help
-	  DPI Interface. This is the Parallel Display Interface.
-
-config OMAP2_DSS_RFBI
-	bool "RFBI support"
-	depends on BROKEN
-        default n
-	help
-	  MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
-	  Instrument's terminology).
-
-	  DBI is a bus between the host processor and a peripheral,
-	  such as a display or a framebuffer chip.
-
-	  See http://www.mipi.org/ for DBI specifications.
-
-config OMAP2_DSS_VENC
-	bool "VENC support"
-        default y
-	help
-	  OMAP Video Encoder support for S-Video and composite TV-out.
-
-config OMAP4_DSS_HDMI
-	bool "HDMI support"
-        default y
-	help
-	  HDMI Interface. This adds the High Definition Multimedia Interface.
-	  See http://www.hdmi.org/ for HDMI specification.
-
-config OMAP4_DSS_HDMI_AUDIO
-	bool
-
-config OMAP2_DSS_SDI
-	bool "SDI support"
-        default n
-	help
-	  SDI (Serial Display Interface) support.
-
-	  SDI is a high speed one-way display serial bus between the host
-	  processor and a display.
-
-config OMAP2_DSS_DSI
-	bool "DSI support"
-        default n
-	help
-	  MIPI DSI (Display Serial Interface) support.
-
-	  DSI is a high speed half-duplex serial interface between the host
-	  processor and a peripheral, such as a display or a framebuffer chip.
-
-	  See http://www.mipi.org/ for DSI specifications.
-
-config OMAP2_DSS_MIN_FCK_PER_PCK
-	int "Minimum FCK/PCK ratio (for scaling)"
-	range 0 32
-	default 0
-	help
-	  This can be used to adjust the minimum FCK/PCK ratio.
-
-	  With this you can make sure that DISPC FCK is at least
-	  n x PCK. Video plane scaling requires higher FCK than
-	  normally.
-
-	  If this is set to 0, there's no extra constraint on the
-	  DISPC FCK. However, the FCK will at minimum be
-	  2xPCK (if active matrix) or 3xPCK (if passive matrix).
-
-	  Max FCK is 173MHz, so this doesn't work if your PCK
-	  is very high.
-
-config OMAP2_DSS_SLEEP_AFTER_VENC_RESET
-	bool "Sleep 20ms after VENC reset"
-	default y
-	help
-	  There is a 20ms sleep after VENC reset which seemed to fix the
-	  reset. The reason for the bug is unclear, and it's also unclear
-	  on what platforms this happens.
-
-	  This option enables the sleep, and is enabled by default. You can
-	  disable the sleep if it doesn't cause problems on your platform.
-
-endif