Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

1 files changed, 2 insertions, 34 deletions

diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index a0703624d5e5..b13949ad3408 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -44,8 +44,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#define PORT_M32R_BASE	PORT_M32R_SIO
-#define PORT_INDEX(x)	(x - PORT_M32R_BASE + 1)
 #define BAUD_RATE	115200
 
 #include <linux/serial_core.h>
@@ -132,22 +130,6 @@ struct irq_info {
 
 static struct irq_info irq_lists[NR_IRQS];
 
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
-	[PORT_UNKNOWN] = {
-		.name			= "unknown",
-		.dfl_xmit_fifo_size	= 1,
-		.flags			= 0,
-	},
-	[PORT_INDEX(PORT_M32R_SIO)] = {
-		.name			= "M32RSIO",
-		.dfl_xmit_fifo_size	= 1,
-		.flags			= 0,
-	},
-};
-
 #ifdef CONFIG_SERIAL_M32R_PLDSIO
 
 #define __sio_in(x) inw((unsigned long)(x))
@@ -907,8 +889,7 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
 
 	spin_lock_irqsave(&up->port.lock, flags);
 
-	up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
-	up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+	up->port.fifosize = 1;
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
@@ -916,23 +897,11 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
 static int
 m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	if (ser->irq >= nr_irqs || ser->irq < 0 ||
-	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
-	    ser->type >= ARRAY_SIZE(uart_config))
+	if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600)
 		return -EINVAL;
 	return 0;
 }
 
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
-	int type = port->type;
-
-	if (type >= ARRAY_SIZE(uart_config))
-		type = 0;
-	return uart_config[type].name;
-}
-
 static struct uart_ops m32r_sio_pops = {
 	.tx_empty	= m32r_sio_tx_empty,
 	.set_mctrl	= m32r_sio_set_mctrl,
@@ -946,7 +915,6 @@ static struct uart_ops m32r_sio_pops = {
 	.shutdown	= m32r_sio_shutdown,
 	.set_termios	= m32r_sio_set_termios,
 	.pm		= m32r_sio_pm,
-	.type		= m32r_sio_type,
 	.release_port	= m32r_sio_release_port,
 	.request_port	= m32r_sio_request_port,
 	.config_port	= m32r_sio_config_port,