diff options
author | Martin K. Petersen <martin.petersen@oracle.com> | 2008-07-17 04:28:35 -0400 |
---|---|---|
committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2008-07-26 15:14:56 -0400 |
commit | af55ff675a8461da6a632320710b050af4366e0c (patch) | |
tree | 2d85ec327340f11f79cedb7d962d232c31819a8c /drivers/scsi/sd.c | |
parent | e0597d70012c82e16ee152270a55d89d8bf66693 (diff) | |
download | lwn-af55ff675a8461da6a632320710b050af4366e0c.tar.gz lwn-af55ff675a8461da6a632320710b050af4366e0c.zip |
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field
Support for controllers and disks that implement DIF protection
information:
- During command preparation the RDPROTECT/WRPROTECT must be set
correctly if the target has DIF enabled.
- READ(6) and WRITE(6) are not supported when DIF is on.
- The controller must be told how to handle the I/O via the
protection operation field in scsi_cmnd.
- Refactor the I/O completion code that extracts failed LBA from the
returned sense data and handle DIF failures correctly.
- sd_dif.c implements the functions required to prepare and complete
requests with protection information attached.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi/sd.c')
-rw-r--r-- | drivers/scsi/sd.c | 121 |
1 files changed, 81 insertions, 40 deletions
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 56b9501d12f3..8e08d51a0f05 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -373,6 +373,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) struct scsi_cmnd *SCpnt; struct scsi_device *sdp = q->queuedata; struct gendisk *disk = rq->rq_disk; + struct scsi_disk *sdkp; sector_t block = rq->sector; unsigned int this_count = rq->nr_sectors; unsigned int timeout = sdp->timeout; @@ -389,6 +390,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) if (ret != BLKPREP_OK) goto out; SCpnt = rq->special; + sdkp = scsi_disk(disk); /* from here on until we're complete, any goto out * is used for a killable error condition */ @@ -478,6 +480,11 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } SCpnt->cmnd[0] = WRITE_6; SCpnt->sc_data_direction = DMA_TO_DEVICE; + + if (blk_integrity_rq(rq) && + sd_dif_prepare(rq, block, sdp->sector_size) == -EIO) + goto out; + } else if (rq_data_dir(rq) == READ) { SCpnt->cmnd[0] = READ_6; SCpnt->sc_data_direction = DMA_FROM_DEVICE; @@ -492,8 +499,12 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) "writing" : "reading", this_count, rq->nr_sectors)); - SCpnt->cmnd[1] = 0; - + /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */ + if (scsi_host_dif_capable(sdp->host, sdkp->protection_type)) + SCpnt->cmnd[1] = 1 << 5; + else + SCpnt->cmnd[1] = 0; + if (block > 0xffffffff) { SCpnt->cmnd[0] += READ_16 - READ_6; SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0; @@ -511,6 +522,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) SCpnt->cmnd[13] = (unsigned char) this_count & 0xff; SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0; } else if ((this_count > 0xff) || (block > 0x1fffff) || + scsi_device_protection(SCpnt->device) || SCpnt->device->use_10_for_rw) { if (this_count > 0xffff) this_count = 0xffff; @@ -545,6 +557,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } SCpnt->sdb.length = this_count * sdp->sector_size; + /* If DIF or DIX is enabled, tell HBA how to handle request */ + if (sdkp->protection_type || scsi_prot_sg_count(SCpnt)) + sd_dif_op(SCpnt, sdkp->protection_type, scsi_prot_sg_count(SCpnt)); + /* * We shouldn't disconnect in the middle of a sector, so with a dumb * host adapter, it's safe to assume that we can at least transfer @@ -939,6 +955,48 @@ static struct block_device_operations sd_fops = { .revalidate_disk = sd_revalidate_disk, }; +static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) +{ + u64 start_lba = scmd->request->sector; + u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512); + u64 bad_lba; + int info_valid; + + if (!blk_fs_request(scmd->request)) + return 0; + + info_valid = scsi_get_sense_info_fld(scmd->sense_buffer, + SCSI_SENSE_BUFFERSIZE, + &bad_lba); + if (!info_valid) + return 0; + + if (scsi_bufflen(scmd) <= scmd->device->sector_size) + return 0; + + if (scmd->device->sector_size < 512) { + /* only legitimate sector_size here is 256 */ + start_lba <<= 1; + end_lba <<= 1; + } else { + /* be careful ... don't want any overflows */ + u64 factor = scmd->device->sector_size / 512; + do_div(start_lba, factor); + do_div(end_lba, factor); + } + + /* The bad lba was reported incorrectly, we have no idea where + * the error is. + */ + if (bad_lba < start_lba || bad_lba >= end_lba) + return 0; + + /* This computation should always be done in terms of + * the resolution of the device's medium. + */ + return (bad_lba - start_lba) * scmd->device->sector_size; +} + /** * sd_done - bottom half handler: called when the lower level * driver has completed (successfully or otherwise) a scsi command. @@ -949,15 +1007,10 @@ static struct block_device_operations sd_fops = { static int sd_done(struct scsi_cmnd *SCpnt) { int result = SCpnt->result; - unsigned int xfer_size = scsi_bufflen(SCpnt); - unsigned int good_bytes = result ? 0 : xfer_size; - u64 start_lba = SCpnt->request->sector; - u64 end_lba = SCpnt->request->sector + (xfer_size / 512); - u64 bad_lba; + unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); struct scsi_sense_hdr sshdr; int sense_valid = 0; int sense_deferred = 0; - int info_valid; if (result) { sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr); @@ -982,36 +1035,7 @@ static int sd_done(struct scsi_cmnd *SCpnt) switch (sshdr.sense_key) { case HARDWARE_ERROR: case MEDIUM_ERROR: - if (!blk_fs_request(SCpnt->request)) - goto out; - info_valid = scsi_get_sense_info_fld(SCpnt->sense_buffer, - SCSI_SENSE_BUFFERSIZE, - &bad_lba); - if (!info_valid) - goto out; - if (xfer_size <= SCpnt->device->sector_size) - goto out; - if (SCpnt->device->sector_size < 512) { - /* only legitimate sector_size here is 256 */ - start_lba <<= 1; - end_lba <<= 1; - } else { - /* be careful ... don't want any overflows */ - u64 factor = SCpnt->device->sector_size / 512; - do_div(start_lba, factor); - do_div(end_lba, factor); - } - - if (bad_lba < start_lba || bad_lba >= end_lba) - /* the bad lba was reported incorrectly, we have - * no idea where the error is - */ - goto out; - - /* This computation should always be done in terms of - * the resolution of the device's medium. - */ - good_bytes = (bad_lba - start_lba)*SCpnt->device->sector_size; + good_bytes = sd_completed_bytes(SCpnt); break; case RECOVERED_ERROR: case NO_SENSE: @@ -1021,10 +1045,23 @@ static int sd_done(struct scsi_cmnd *SCpnt) scsi_print_sense("sd", SCpnt); SCpnt->result = 0; memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); - good_bytes = xfer_size; + good_bytes = scsi_bufflen(SCpnt); + break; + case ABORTED_COMMAND: + if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */ + scsi_print_result(SCpnt); + scsi_print_sense("sd", SCpnt); + good_bytes = sd_completed_bytes(SCpnt); + } break; case ILLEGAL_REQUEST: - if (SCpnt->device->use_10_for_rw && + if (sshdr.asc == 0x10) { /* DIX: HBA detected corruption */ + scsi_print_result(SCpnt); + scsi_print_sense("sd", SCpnt); + good_bytes = sd_completed_bytes(SCpnt); + } + if (!scsi_device_protection(SCpnt->device) && + SCpnt->device->use_10_for_rw && (SCpnt->cmnd[0] == READ_10 || SCpnt->cmnd[0] == WRITE_10)) SCpnt->device->use_10_for_rw = 0; @@ -1037,6 +1074,9 @@ static int sd_done(struct scsi_cmnd *SCpnt) break; } out: + if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt)) + sd_dif_complete(SCpnt, good_bytes); + return good_bytes; } @@ -1826,6 +1866,7 @@ static int sd_probe(struct device *dev) dev_set_drvdata(dev, sdkp); add_disk(gd); + sd_dif_config_host(sdkp); sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", sdp->removable ? "removable " : ""); |