[SCSI] hpsa: add driver for HP Smart Array controllers.

This driver supports a subset of HP Smart Array Controllers.
It is a SCSI alternative to the cciss driver.

[akpm@linux-foundation.org: avoid helpful cleanup patches]
[achiang@hp.com: make device attrs static]
[akpm@linux-foundation.org: msleep() does set_current_state() itself]
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 273 insertions, 0 deletions

diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
new file mode 100644
index 000000000000..6bd1949144b5
--- /dev/null
+++ b/drivers/scsi/hpsa.h
@@ -0,0 +1,273 @@
+/*
+ *    Disk Array driver for HP Smart Array SAS controllers
+ *    Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+#ifndef HPSA_H
+#define HPSA_H
+
+#include <scsi/scsicam.h>
+
+#define IO_OK		0
+#define IO_ERROR	1
+
+struct ctlr_info;
+
+struct access_method {
+	void (*submit_command)(struct ctlr_info *h,
+		struct CommandList *c);
+	void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
+	unsigned long (*fifo_full)(struct ctlr_info *h);
+	unsigned long (*intr_pending)(struct ctlr_info *h);
+	unsigned long (*command_completed)(struct ctlr_info *h);
+};
+
+struct hpsa_scsi_dev_t {
+	int devtype;
+	int bus, target, lun;		/* as presented to the OS */
+	unsigned char scsi3addr[8];	/* as presented to the HW */
+#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
+	unsigned char device_id[16];    /* from inquiry pg. 0x83 */
+	unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
+	unsigned char model[16];        /* bytes 16-31 of inquiry data */
+	unsigned char revision[4];      /* bytes 32-35 of inquiry data */
+	unsigned char raid_level;	/* from inquiry page 0xC1 */
+};
+
+struct ctlr_info {
+	int	ctlr;
+	char	devname[8];
+	char    *product_name;
+	char	firm_ver[4]; /* Firmware version */
+	struct pci_dev *pdev;
+	__u32	board_id;
+	void __iomem *vaddr;
+	unsigned long paddr;
+	int 	nr_cmds; /* Number of commands allowed on this controller */
+	struct CfgTable __iomem *cfgtable;
+	int	interrupts_enabled;
+	int	major;
+	int 	max_commands;
+	int	commands_outstanding;
+	int 	max_outstanding; /* Debug */
+	int	usage_count;  /* number of opens all all minor devices */
+#	define DOORBELL_INT	0
+#	define PERF_MODE_INT	1
+#	define SIMPLE_MODE_INT	2
+#	define MEMQ_MODE_INT	3
+	unsigned int intr[4];
+	unsigned int msix_vector;
+	unsigned int msi_vector;
+	struct access_method access;
+
+	/* queue and queue Info */
+	struct hlist_head reqQ;
+	struct hlist_head cmpQ;
+	unsigned int Qdepth;
+	unsigned int maxQsinceinit;
+	unsigned int maxSG;
+	spinlock_t lock;
+
+	/* pointers to command and error info pool */
+	struct CommandList 	*cmd_pool;
+	dma_addr_t		cmd_pool_dhandle;
+	struct ErrorInfo 	*errinfo_pool;
+	dma_addr_t		errinfo_pool_dhandle;
+	unsigned long  		*cmd_pool_bits;
+	int			nr_allocs;
+	int			nr_frees;
+	int			busy_initializing;
+	int			busy_scanning;
+	struct mutex		busy_shutting_down;
+	struct list_head	scan_list;
+	struct completion	scan_wait;
+
+	struct Scsi_Host *scsi_host;
+	spinlock_t devlock; /* to protect hba[ctlr]->dev[];  */
+	int ndevices; /* number of used elements in .dev[] array. */
+#define HPSA_MAX_SCSI_DEVS_PER_HBA 256
+	struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+};
+#define HPSA_ABORT_MSG 0
+#define HPSA_DEVICE_RESET_MSG 1
+#define HPSA_BUS_RESET_MSG 2
+#define HPSA_HOST_RESET_MSG 3
+#define HPSA_MSG_SEND_RETRY_LIMIT 10
+#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS 1000
+
+/* Maximum time in seconds driver will wait for command completions
+ * when polling before giving up.
+ */
+#define HPSA_MAX_POLL_TIME_SECS (20)
+
+/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines
+ * how many times to retry TEST UNIT READY on a device
+ * while waiting for it to become ready before giving up.
+ * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval
+ * between sending TURs while waiting for a device
+ * to become ready.
+ */
+#define HPSA_TUR_RETRY_LIMIT (20)
+#define HPSA_MAX_WAIT_INTERVAL_SECS (30)
+
+/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds.  HPSA_BOARD_READY_POLL_INTERVAL and
+ * HPSA_BOARD_READY_ITERATIONS are derived from those.
+ */
+#define HPSA_BOARD_READY_WAIT_SECS (120)
+#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define HPSA_BOARD_READY_POLL_INTERVAL \
+	((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
+#define HPSA_BOARD_READY_ITERATIONS \
+	((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
+		HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
+#define HPSA_POST_RESET_PAUSE_MSECS (3000)
+#define HPSA_POST_RESET_NOOP_RETRIES (12)
+
+/*  Defining the diffent access_menthods */
+/*
+ * Memory mapped FIFO interface (SMART 53xx cards)
+ */
+#define SA5_DOORBELL	0x20
+#define SA5_REQUEST_PORT_OFFSET	0x40
+#define SA5_REPLY_INTR_MASK_OFFSET	0x34
+#define SA5_REPLY_PORT_OFFSET		0x44
+#define SA5_INTR_STATUS		0x30
+#define SA5_SCRATCHPAD_OFFSET	0xB0
+
+#define SA5_CTCFG_OFFSET	0xB4
+#define SA5_CTMEM_OFFSET	0xB8
+
+#define SA5_INTR_OFF		0x08
+#define SA5B_INTR_OFF		0x04
+#define SA5_INTR_PENDING	0x08
+#define SA5B_INTR_PENDING	0x04
+#define FIFO_EMPTY		0xffffffff
+#define HPSA_FIRMWARE_READY	0xffff0000 /* value in scratchpad register */
+
+#define HPSA_ERROR_BIT		0x02
+#define HPSA_TAG_CONTAINS_INDEX(tag) ((tag) & 0x04)
+#define HPSA_TAG_TO_INDEX(tag) ((tag) >> 3)
+#define HPSA_TAG_DISCARD_ERROR_BITS(tag) ((tag) & ~3)
+
+#define HPSA_INTR_ON 	1
+#define HPSA_INTR_OFF	0
+/*
+	Send the command to the hardware
+*/
+static void SA5_submit_command(struct ctlr_info *h,
+	struct CommandList *c)
+{
+#ifdef HPSA_DEBUG
+	 printk(KERN_WARNING "hpsa: Sending %x - down to controller\n",
+		c->busaddr);
+#endif /* HPSA_DEBUG */
+	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+	h->commands_outstanding++;
+	if (h->commands_outstanding > h->max_outstanding)
+		h->max_outstanding = h->commands_outstanding;
+}
+
+/*
+ *  This card is the opposite of the other cards.
+ *   0 turns interrupts on...
+ *   0x08 turns them off...
+ */
+static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+	if (val) { /* Turn interrupts on */
+		h->interrupts_enabled = 1;
+		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	} else { /* Turn them off */
+		h->interrupts_enabled = 0;
+		writel(SA5_INTR_OFF,
+			h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	}
+}
+/*
+ *  Returns true if fifo is full.
+ *
+ */
+static unsigned long SA5_fifo_full(struct ctlr_info *h)
+{
+	if (h->commands_outstanding >= h->max_commands)
+		return 1;
+	else
+		return 0;
+
+}
+/*
+ *   returns value read from hardware.
+ *     returns FIFO_EMPTY if there is nothing to read
+ */
+static unsigned long SA5_completed(struct ctlr_info *h)
+{
+	unsigned long register_value
+		= readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
+
+	if (register_value != FIFO_EMPTY)
+		h->commands_outstanding--;
+
+#ifdef HPSA_DEBUG
+	if (register_value != FIFO_EMPTY)
+		printk(KERN_INFO "hpsa:  Read %lx back from board\n",
+			register_value);
+	else
+		printk(KERN_INFO "hpsa:  FIFO Empty read\n");
+#endif
+
+	return register_value;
+}
+/*
+ *	Returns true if an interrupt is pending..
+ */
+static unsigned long SA5_intr_pending(struct ctlr_info *h)
+{
+	unsigned long register_value  =
+		readl(h->vaddr + SA5_INTR_STATUS);
+#ifdef HPSA_DEBUG
+	printk(KERN_INFO "hpsa: intr_pending %lx\n", register_value);
+#endif  /* HPSA_DEBUG */
+	if (register_value &  SA5_INTR_PENDING)
+		return  1;
+	return 0 ;
+}
+
+
+static struct access_method SA5_access = {
+	SA5_submit_command,
+	SA5_intr_mask,
+	SA5_fifo_full,
+	SA5_intr_pending,
+	SA5_completed,
+};
+
+struct board_type {
+	__u32	board_id;
+	char	*product_name;
+	struct access_method *access;
+};
+
+
+/* end of old hpsa_scsi.h file */
+
+#endif /* HPSA_H */
+