pwm: atmel: Implement .get_state()

This function reads back the configured parameters from the hardware. As
.apply() rounds down (mostly) I'm rounding up in .get_state() to achieve
that applying a state just read from hardware is a no-op.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

1 files changed, 40 insertions, 0 deletions

diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index b8b47c315ac0..6161e7e3e9ac 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -295,8 +295,48 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+static void atmel_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				struct pwm_state *state)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	u32 sr, cmr;
+
+	sr = atmel_pwm_readl(atmel_pwm, PWM_SR);
+	cmr = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+
+	if (sr & (1 << pwm->hwpwm)) {
+		unsigned long rate = clk_get_rate(atmel_pwm->clk);
+		u32 cdty, cprd, pres;
+		u64 tmp;
+
+		pres = cmr & PWM_CMR_CPRE_MSK;
+
+		cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+					  atmel_pwm->data->regs.period);
+		tmp = (u64)cprd * NSEC_PER_SEC;
+		tmp <<= pres;
+		state->period = DIV64_U64_ROUND_UP(tmp, rate);
+
+		cdty = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+					  atmel_pwm->data->regs.duty);
+		tmp = (u64)cdty * NSEC_PER_SEC;
+		tmp <<= pres;
+		state->duty_cycle = DIV64_U64_ROUND_UP(tmp, rate);
+
+		state->enabled = true;
+	} else {
+		state->enabled = false;
+	}
+
+	if (cmr & PWM_CMR_CPOL)
+		state->polarity = PWM_POLARITY_INVERSED;
+	else
+		state->polarity = PWM_POLARITY_NORMAL;
+}
+
 static const struct pwm_ops atmel_pwm_ops = {
 	.apply = atmel_pwm_apply,
+	.get_state = atmel_pwm_get_state,
 	.owner = THIS_MODULE,
 };