wm831x: Factor out WM831x backup battery charger

The backup battery on WM831x is a separate IP block to the main PMU
and is largely unrelated to the main supply functionality. Factor it
out into a separate driver in order to reflect this and better support
future hardware versions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>

1 files changed, 3 insertions, 141 deletions

diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c
index 2a4c8b0b829c..f85e80b1b400 100644
--- a/drivers/power/wm831x_power.c
+++ b/drivers/power/wm831x_power.c
@@ -21,7 +21,6 @@
 struct wm831x_power {
 	struct wm831x *wm831x;
 	struct power_supply wall;
-	struct power_supply backup;
 	struct power_supply usb;
 	struct power_supply battery;
 };
@@ -454,125 +453,6 @@ static irqreturn_t wm831x_bat_irq(int irq, void *data)
 
 
 /*********************************************************************
- *		Backup supply properties
- *********************************************************************/
-
-static void wm831x_config_backup(struct wm831x *wm831x)
-{
-	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
-	struct wm831x_backup_pdata *pdata;
-	int ret, reg;
-
-	if (!wm831x_pdata || !wm831x_pdata->backup) {
-		dev_warn(wm831x->dev,
-			 "No backup battery charger configuration\n");
-		return;
-	}
-
-	pdata = wm831x_pdata->backup;
-
-	reg = 0;
-
-	if (pdata->charger_enable)
-		reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
-	if (pdata->no_constant_voltage)
-		reg |= WM831X_BKUP_CHG_MODE;
-
-	switch (pdata->vlim) {
-	case 2500:
-		break;
-	case 3100:
-		reg |= WM831X_BKUP_CHG_VLIM;
-		break;
-	default:
-		dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
-			pdata->vlim);
-	}
-
-	switch (pdata->ilim) {
-	case 100:
-		break;
-	case 200:
-		reg |= 1;
-		break;
-	case 300:
-		reg |= 2;
-		break;
-	case 400:
-		reg |= 3;
-		break;
-	default:
-		dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
-			pdata->ilim);
-	}
-
-	ret = wm831x_reg_unlock(wm831x);
-	if (ret != 0) {
-		dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
-		return;
-	}
-
-	ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
-			      WM831X_BKUP_CHG_ENA_MASK |
-			      WM831X_BKUP_CHG_MODE_MASK |
-			      WM831X_BKUP_BATT_DET_ENA_MASK |
-			      WM831X_BKUP_CHG_VLIM_MASK |
-			      WM831X_BKUP_CHG_ILIM_MASK,
-			      reg);
-	if (ret != 0)
-		dev_err(wm831x->dev,
-			"Failed to set backup charger config: %d\n", ret);
-
-	wm831x_reg_lock(wm831x);
-}
-
-static int wm831x_backup_get_prop(struct power_supply *psy,
-				  enum power_supply_property psp,
-				  union power_supply_propval *val)
-{
-	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
-	struct wm831x *wm831x = wm831x_power->wm831x;
-	int ret = 0;
-
-	ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
-	if (ret < 0)
-		return ret;
-
-	switch (psp) {
-	case POWER_SUPPLY_PROP_STATUS:
-		if (ret & WM831X_BKUP_CHG_STS)
-			val->intval = POWER_SUPPLY_STATUS_CHARGING;
-		else
-			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-		break;
-
-	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
-						val);
-		break;
-
-	case POWER_SUPPLY_PROP_PRESENT:
-		if (ret & WM831X_BKUP_CHG_STS)
-			val->intval = 1;
-		else
-			val->intval = 0;
-		break;
-
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static enum power_supply_property wm831x_backup_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_PRESENT,
-};
-
-/*********************************************************************
  *		Initialisation
  *********************************************************************/
 
@@ -595,10 +475,7 @@ static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
 
 	dev_dbg(wm831x->dev, "Power source changed\n");
 
-	/* Just notify for everything - little harm in overnotifying.
-	 * The backup battery is not a power source while the system
-	 * is running so skip that.
-	 */
+	/* Just notify for everything - little harm in overnotifying. */
 	power_supply_changed(&wm831x_power->battery);
 	power_supply_changed(&wm831x_power->usb);
 	power_supply_changed(&wm831x_power->wall);
@@ -613,7 +490,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
 	struct power_supply *usb;
 	struct power_supply *battery;
 	struct power_supply *wall;
-	struct power_supply *backup;
 	int ret, irq, i;
 
 	power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL);
@@ -626,13 +502,11 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
 	usb = &power->usb;
 	battery = &power->battery;
 	wall = &power->wall;
-	backup = &power->backup;
 
 	/* We ignore configuration failures since we can still read back
-	 * the status without enabling either of the chargers.
+	 * the status without enabling the charger.
 	 */
 	wm831x_config_battery(wm831x);
-	wm831x_config_backup(wm831x);
 
 	wall->name = "wm831x-wall";
 	wall->type = POWER_SUPPLY_TYPE_MAINS;
@@ -661,15 +535,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_battery;
 
-	backup->name = "wm831x-backup";
-	backup->type = POWER_SUPPLY_TYPE_BATTERY;
-	backup->properties = wm831x_backup_props;
-	backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
-	backup->get_property = wm831x_backup_get_prop;
-	ret = power_supply_register(&pdev->dev, backup);
-	if (ret)
-		goto err_usb;
-
 	irq = platform_get_irq_byname(pdev, "SYSLO");
 	ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq,
 				 IRQF_TRIGGER_RISING, "SYSLO",
@@ -677,7 +542,7 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
 			irq, ret);
-		goto err_backup;
+		goto err_usb;
 	}
 
 	irq = platform_get_irq_byname(pdev, "PWR SRC");
@@ -716,8 +581,6 @@ err_bat_irq:
 err_syslo:
 	irq = platform_get_irq_byname(pdev, "SYSLO");
 	wm831x_free_irq(wm831x, irq, power);
-err_backup:
-	power_supply_unregister(backup);
 err_usb:
 	power_supply_unregister(usb);
 err_battery:
@@ -746,7 +609,6 @@ static __devexit int wm831x_power_remove(struct platform_device *pdev)
 	irq = platform_get_irq_byname(pdev, "SYSLO");
 	wm831x_free_irq(wm831x, irq, wm831x_power);
 
-	power_supply_unregister(&wm831x_power->backup);
 	power_supply_unregister(&wm831x_power->battery);
 	power_supply_unregister(&wm831x_power->wall);
 	power_supply_unregister(&wm831x_power->usb);