ab8500-bm: Add support for the new ab8540 platform

Provide AB8540 platform specific information required to run the
Battery Management subsystem on AB8540 based devices. For this to
happen we see the introduction of separate platform specific data
structures and a means in which to process them.

Signed-off-by: Lee Jones <lee.jones@linaro.org>

1 files changed, 88 insertions, 3 deletions

diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index e8759763fbe0..85742a6d29ff 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -414,13 +414,20 @@ static const struct abx500_fg_parameters fg = {
 	.pcut_debounce_time = 2,
 };
 
-static const struct abx500_maxim_parameters maxi_params = {
+static const struct abx500_maxim_parameters ab8500_maxi_params = {
 	.ena_maxi = true,
 	.chg_curr = 910,
 	.wait_cycles = 10,
 	.charger_curr_step = 100,
 };
 
+static const struct abx500_maxim_parameters abx540_maxi_params = {
+        .ena_maxi = true,
+        .chg_curr = 3000,
+        .wait_cycles = 10,
+        .charger_curr_step = 200,
+};
+
 static const struct abx500_bm_charger_parameters chg = {
 	.usb_volt_max		= 5500,
 	.usb_curr_max		= 1500,
@@ -428,6 +435,46 @@ static const struct abx500_bm_charger_parameters chg = {
 	.ac_curr_max		= 1500,
 };
 
+/*
+ * This array maps the raw hex value to charger output current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_output_curr_map[] = {
+        100,    200,    300,    400,    500,    600,    700,    800,
+        900,    1000,   1100,   1200,   1300,   1400,   1500,   1500,
+};
+
+static int ab8540_charge_output_curr_map[] = {
+        0,      0,      0,      75,     100,    125,    150,    175,
+        200,    225,    250,    275,    300,    325,    350,    375,
+        400,    425,    450,    475,    500,    525,    550,    575,
+        600,    625,    650,    675,    700,    725,    750,    775,
+        800,    825,    850,    875,    900,    925,    950,    975,
+        1000,   1025,   1050,   1075,   1100,   1125,   1150,   1175,
+        1200,   1225,   1250,   1275,   1300,   1325,   1350,   1375,
+        1400,   1425,   1450,   1500,   1600,   1700,   1900,   2000,
+};
+
+/*
+ * This array maps the raw hex value to charger input current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_input_curr_map[] = {
+        50,     98,     193,    290,    380,    450,    500,    600,
+        700,    800,    900,    1000,   1100,   1300,   1400,   1500,
+};
+
+static int ab8540_charge_input_curr_map[] = {
+        25,     50,     75,     100,    125,    150,    175,    200,
+        225,    250,    275,    300,    325,    350,    375,    400,
+        425,    450,    475,    500,    525,    550,    575,    600,
+        625,    650,    675,    700,    725,    750,    775,    800,
+        825,    850,    875,    900,    925,    950,    975,    1000,
+        1025,   1050,   1075,   1100,   1125,   1150,   1175,   1200,
+        1225,   1250,   1275,   1300,   1325,   1350,   1375,   1400,
+        1425,   1450,   1475,   1500,   1500,   1500,   1500,   1500,
+};
+
 struct abx500_bm_data ab8500_bm_data = {
 	.temp_under             = 3,
 	.temp_low               = 8,
@@ -447,15 +494,53 @@ struct abx500_bm_data ab8500_bm_data = {
 	.fg_res                 = 100,
 	.cap_levels             = &cap_levels,
 	.bat_type               = bat_type_thermistor,
-	.n_btypes               = 3,
+	.n_btypes               = ARRAY_SIZE(bat_type_thermistor),
 	.batt_id                = 0,
 	.interval_charging      = 5,
 	.interval_not_charging  = 120,
 	.temp_hysteresis        = 3,
 	.gnd_lift_resistance    = 34,
-	.maxi                   = &maxi_params,
+	.chg_output_curr        = ab8500_charge_output_curr_map,
+	.n_chg_out_curr         = ARRAY_SIZE(ab8500_charge_output_curr_map),
+	.maxi                   = &ab8500_maxi_params,
 	.chg_params             = &chg,
 	.fg_params              = &fg,
+        .chg_input_curr         = ab8500_charge_input_curr_map,
+        .n_chg_in_curr          = ARRAY_SIZE(ab8500_charge_input_curr_map),
+};
+
+struct abx500_bm_data ab8540_bm_data = {
+        .temp_under             = 3,
+        .temp_low               = 8,
+        .temp_high              = 43,
+        .temp_over              = 48,
+        .main_safety_tmr_h      = 4,
+        .temp_interval_chg      = 20,
+        .temp_interval_nochg    = 120,
+        .usb_safety_tmr_h       = 4,
+        .bkup_bat_v             = BUP_VCH_SEL_2P6V,
+        .bkup_bat_i             = BUP_ICH_SEL_150UA,
+        .no_maintenance         = false,
+        .capacity_scaling       = false,
+        .adc_therm              = ABx500_ADC_THERM_BATCTRL,
+        .chg_unknown_bat        = false,
+        .enable_overshoot       = false,
+        .fg_res                 = 100,
+        .cap_levels             = &cap_levels,
+        .bat_type               = bat_type_thermistor,
+        .n_btypes               = ARRAY_SIZE(bat_type_thermistor),
+        .batt_id                = 0,
+        .interval_charging      = 5,
+        .interval_not_charging  = 120,
+        .temp_hysteresis        = 3,
+        .gnd_lift_resistance    = 0,
+        .maxi                   = &abx540_maxi_params,
+        .chg_params             = &chg,
+        .fg_params              = &fg,
+        .chg_output_curr        = ab8540_charge_output_curr_map,
+        .n_chg_out_curr         = ARRAY_SIZE(ab8540_charge_output_curr_map),
+        .chg_input_curr         = ab8540_charge_input_curr_map,
+        .n_chg_in_curr          = ARRAY_SIZE(ab8540_charge_input_curr_map),
 };
 
 int ab8500_bm_of_probe(struct device *dev,