Merge tag 'renesas-pinctrl-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v6.13

  - Marks GPIOs as used on RZ/A1 and RZ/A2,
  - Add open-drain and schmitt-trigger support on RZ/V2H(P),
  - Miscellaneous fixes and improvements.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

4 files changed, 59 insertions, 3 deletions

diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 14bd55d64731..7f3f41c7fe54 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig
@@ -41,6 +41,7 @@ config PINCTRL_RENESAS
 	select PINCTRL_PFC_R8A779H0 if ARCH_R8A779H0
 	select PINCTRL_RZG2L if ARCH_RZG2L
 	select PINCTRL_RZV2M if ARCH_R9A09G011
+	select PINCTRL_RZG2L if ARCH_R9A09G057
 	select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203
 	select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264
 	select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269
diff --git a/drivers/pinctrl/renesas/pinctrl-rza1.c b/drivers/pinctrl/renesas/pinctrl-rza1.c
index 6527872813dc..b1058504e0bb 100644
--- a/drivers/pinctrl/renesas/pinctrl-rza1.c
+++ b/drivers/pinctrl/renesas/pinctrl-rza1.c
@@ -19,6 +19,7 @@
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
@@ -750,6 +751,11 @@ static int rza1_pin_mux_single(struct rza1_pinctrl *rza1_pctl,
 static int rza1_gpio_request(struct gpio_chip *chip, unsigned int gpio)
 {
 	struct rza1_port *port = gpiochip_get_data(chip);
+	int ret;
+
+	ret = pinctrl_gpio_request(chip, gpio);
+	if (ret)
+		return ret;
 
 	rza1_pin_reset(port, gpio);
 
@@ -771,6 +777,7 @@ static void rza1_gpio_free(struct gpio_chip *chip, unsigned int gpio)
 	struct rza1_port *port = gpiochip_get_data(chip);
 
 	rza1_pin_reset(port, gpio);
+	pinctrl_gpio_free(chip, gpio);
 }
 
 static int rza1_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
diff --git a/drivers/pinctrl/renesas/pinctrl-rza2.c b/drivers/pinctrl/renesas/pinctrl-rza2.c
index af689d7c117f..dd1f8c29d3e7 100644
--- a/drivers/pinctrl/renesas/pinctrl-rza2.c
+++ b/drivers/pinctrl/renesas/pinctrl-rza2.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 
@@ -229,6 +230,8 @@ static const char * const rza2_gpio_names[] = {
 static struct gpio_chip chip = {
 	.names = rza2_gpio_names,
 	.base = -1,
+	.request = pinctrl_gpio_request,
+	.free = pinctrl_gpio_free,
 	.get_direction = rza2_chip_get_direction,
 	.direction_input = rza2_chip_direction_input,
 	.direction_output = rza2_chip_direction_output,
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 5a403915fed2..5eefbace7d91 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -139,6 +139,8 @@
 #define IEN(off)		(0x1800 + (off) * 8)
 #define PUPD(off)		(0x1C00 + (off) * 8)
 #define ISEL(off)		(0x2C00 + (off) * 8)
+#define NOD(off)		(0x3000 + (off) * 8)
+#define SMT(off)		(0x3400 + (off) * 8)
 #define SD_CH(off, ch)		((off) + (ch) * 4)
 #define ETH_POC(off, ch)	((off) + (ch) * 4)
 #define QSPI			(0x3008)
@@ -160,6 +162,8 @@
 #define IOLH_MASK		0x03
 #define SR_MASK			0x01
 #define PUPD_MASK		0x03
+#define NOD_MASK		0x01
+#define SMT_MASK		0x01
 
 #define PM_INPUT		0x1
 #define PM_OUTPUT		0x2
@@ -168,7 +172,6 @@
 #define RZG2L_PIN_ID_TO_PIN(id)		((id) % RZG2L_PINS_PER_PORT)
 
 #define RZG2L_TINT_MAX_INTERRUPT	32
-#define RZG2L_TINT_IRQ_START_INDEX	9
 #define RZG2L_PACK_HWIRQ(t, i)		(((t) << 16) | (i))
 
 /* Custom pinconf parameters */
@@ -247,6 +250,7 @@ enum rzg2l_iolh_index {
  * @iolh_groupb_ua: IOLH group B uA specific values
  * @iolh_groupc_ua: IOLH group C uA specific values
  * @iolh_groupb_oi: IOLH group B output impedance specific values
+ * @tint_start_index: the start index for the TINT interrupts
  * @drive_strength_ua: drive strength in uA is supported (otherwise mA is supported)
  * @func_base: base number for port function (see register PFC)
  * @oen_max_pin: the maximum pin number supporting output enable
@@ -258,6 +262,7 @@ struct rzg2l_hwcfg {
 	u16 iolh_groupb_ua[RZG2L_IOLH_IDX_MAX];
 	u16 iolh_groupc_ua[RZG2L_IOLH_IDX_MAX];
 	u16 iolh_groupb_oi[4];
+	u16 tint_start_index;
 	bool drive_strength_ua;
 	u8 func_base;
 	u8 oen_max_pin;
@@ -1337,6 +1342,27 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 	}
 
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		if (!(cfg & PIN_CFG_NOD))
+			return -EINVAL;
+
+		arg = rzg2l_read_pin_config(pctrl, NOD(off), bit, NOD_MASK);
+		if (!arg && param != PIN_CONFIG_DRIVE_PUSH_PULL)
+			return -EINVAL;
+		if (arg && param != PIN_CONFIG_DRIVE_OPEN_DRAIN)
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		if (!(cfg & PIN_CFG_SMT))
+			return -EINVAL;
+
+		arg = rzg2l_read_pin_config(pctrl, SMT(off), bit, SMT_MASK);
+		if (!arg)
+			return -EINVAL;
+		break;
+
 	case RENESAS_RZV2H_PIN_CONFIG_OUTPUT_IMPEDANCE:
 		if (!(cfg & PIN_CFG_IOLH_RZV2H))
 			return -EINVAL;
@@ -1466,6 +1492,22 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
 			break;
 
+		case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		case PIN_CONFIG_DRIVE_PUSH_PULL:
+			if (!(cfg & PIN_CFG_NOD))
+				return -EINVAL;
+
+			rzg2l_rmw_pin_config(pctrl, NOD(off), bit, NOD_MASK,
+					     param == PIN_CONFIG_DRIVE_OPEN_DRAIN ? 1 : 0);
+			break;
+
+		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+			if (!(cfg & PIN_CFG_SMT))
+				return -EINVAL;
+
+			rzg2l_rmw_pin_config(pctrl, SMT(off), bit, SMT_MASK, arg);
+			break;
+
 		case RENESAS_RZV2H_PIN_CONFIG_OUTPUT_IMPEDANCE:
 			if (!(cfg & PIN_CFG_IOLH_RZV2H))
 				return -EINVAL;
@@ -2379,7 +2421,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
 
 	rzg2l_gpio_irq_endisable(pctrl, child, true);
 	pctrl->hwirq[irq] = child;
-	irq += RZG2L_TINT_IRQ_START_INDEX;
+	irq += pctrl->data->hwcfg->tint_start_index;
 
 	/* All these interrupts are level high in the CPU */
 	*parent_type = IRQ_TYPE_LEVEL_HIGH;
@@ -2710,7 +2752,7 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl)
 
 	ret = pinctrl_enable(pctrl->pctl);
 	if (ret)
-		dev_err_probe(pctrl->dev, ret, "pinctrl enable failed\n");
+		return dev_err_probe(pctrl->dev, ret, "pinctrl enable failed\n");
 
 	ret = rzg2l_gpio_register(pctrl);
 	if (ret)
@@ -3034,6 +3076,7 @@ static const struct rzg2l_hwcfg rzg2l_hwcfg = {
 		[RZG2L_IOLH_IDX_3V3] = 2000, 4000, 8000, 12000,
 	},
 	.iolh_groupb_oi = { 100, 66, 50, 33, },
+	.tint_start_index = 9,
 	.oen_max_pin = 0,
 };
 
@@ -3063,6 +3106,7 @@ static const struct rzg2l_hwcfg rzg3s_hwcfg = {
 		/* 3v3 power source */
 		[RZG2L_IOLH_IDX_3V3] = 4500, 5200, 5700, 6050,
 	},
+	.tint_start_index = 9,
 	.drive_strength_ua = true,
 	.func_base = 1,
 	.oen_max_pin = 1, /* Pin 1 of P0 and P7 is the maximum OEN pin. */
@@ -3073,6 +3117,7 @@ static const struct rzg2l_hwcfg rzv2h_hwcfg = {
 	.regs = {
 		.pwpr = 0x3c04,
 	},
+	.tint_start_index = 17,
 };
 
 static struct rzg2l_pinctrl_data r9a07g043_data = {