diff options
author | Neil Armstrong <narmstrong@baylibre.com> | 2019-03-25 10:39:40 +0100 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2019-04-17 14:12:50 +0530 |
commit | 16df8bcb672c45e69a7bf4b37bb6de12c705e195 (patch) | |
tree | f5e93abdc598a480204fabbd5016b8b37c92ce43 /drivers/phy/amlogic | |
parent | ab6dbeb24d1a93425b2d1d91b17a7bce79dba41b (diff) | |
download | lwn-16df8bcb672c45e69a7bf4b37bb6de12c705e195.tar.gz lwn-16df8bcb672c45e69a7bf4b37bb6de12c705e195.zip |
phy: amlogic: add Amlogic G12A USB2 PHY Driver
This adds support for the USB2 PHY found in the Amlogic G12A SoC Family.
It supports Host and/or Peripheral mode, depending on it's position.
The first PHY is only used as Host, but the second supports Dual modes
defined by the USB Control Glue HW in front of the USB Controllers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy/amlogic')
-rw-r--r-- | drivers/phy/amlogic/Kconfig | 11 | ||||
-rw-r--r-- | drivers/phy/amlogic/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/amlogic/phy-meson-g12a-usb2.c | 341 |
3 files changed, 353 insertions, 0 deletions
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 23fe1cda2f70..560ff0f1ed4c 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -36,3 +36,14 @@ config PHY_MESON_GXL_USB3 Enable this to support the Meson USB3 PHY and OTG detection IP block found in Meson GXL and GXM SoCs. If unsure, say N. + +config PHY_MESON_G12A_USB2 + tristate "Meson G12A USB2 PHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson USB2 PHYs found in Meson + G12A SoCs. + If unsure, say N. diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index 4fd8848c194d..7d4d10f5a6b3 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o +obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c new file mode 100644 index 000000000000..9065ffc85eb4 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Meson G12A USB2 PHY driver + * + * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + * Copyright (C) 2017 Amlogic, Inc. All rights reserved + * Copyright (C) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define PHY_CTRL_R0 0x0 +#define PHY_CTRL_R1 0x4 +#define PHY_CTRL_R2 0x8 +#define PHY_CTRL_R3 0xc + #define PHY_CTRL_R3_SQUELCH_REF GENMASK(1, 0) + #define PHY_CTRL_R3_HSDIC_REF GENMASK(3, 2) + #define PHY_CTRL_R3_DISC_THRESH GENMASK(7, 4) + +#define PHY_CTRL_R4 0x10 + #define PHY_CTRL_R4_CALIB_CODE_7_0 GENMASK(7, 0) + #define PHY_CTRL_R4_CALIB_CODE_15_8 GENMASK(15, 8) + #define PHY_CTRL_R4_CALIB_CODE_23_16 GENMASK(23, 16) + #define PHY_CTRL_R4_I_C2L_CAL_EN BIT(24) + #define PHY_CTRL_R4_I_C2L_CAL_RESET_N BIT(25) + #define PHY_CTRL_R4_I_C2L_CAL_DONE BIT(26) + #define PHY_CTRL_R4_TEST_BYPASS_MODE_EN BIT(27) + #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0 GENMASK(29, 28) + #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2 GENMASK(31, 30) + +#define PHY_CTRL_R5 0x14 +#define PHY_CTRL_R6 0x18 +#define PHY_CTRL_R7 0x1c +#define PHY_CTRL_R8 0x20 +#define PHY_CTRL_R9 0x24 +#define PHY_CTRL_R10 0x28 +#define PHY_CTRL_R11 0x2c +#define PHY_CTRL_R12 0x30 +#define PHY_CTRL_R13 0x34 + #define PHY_CTRL_R13_CUSTOM_PATTERN_19 GENMASK(7, 0) + #define PHY_CTRL_R13_LOAD_STAT BIT(14) + #define PHY_CTRL_R13_UPDATE_PMA_SIGNALS BIT(15) + #define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET GENMASK(20, 16) + #define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT BIT(21) + #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL BIT(22) + #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN BIT(23) + #define PHY_CTRL_R13_I_C2L_HS_EN BIT(24) + #define PHY_CTRL_R13_I_C2L_FS_EN BIT(25) + #define PHY_CTRL_R13_I_C2L_LS_EN BIT(26) + #define PHY_CTRL_R13_I_C2L_HS_OE BIT(27) + #define PHY_CTRL_R13_I_C2L_FS_OE BIT(28) + #define PHY_CTRL_R13_I_C2L_HS_RX_EN BIT(29) + #define PHY_CTRL_R13_I_C2L_FSLS_RX_EN BIT(30) + +#define PHY_CTRL_R14 0x38 + #define PHY_CTRL_R14_I_RDP_EN BIT(0) + #define PHY_CTRL_R14_I_RPU_SW1_EN BIT(1) + #define PHY_CTRL_R14_I_RPU_SW2_EN GENMASK(2, 3) + #define PHY_CTRL_R14_PG_RSTN BIT(4) + #define PHY_CTRL_R14_I_C2L_DATA_16_8 BIT(5) + #define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO BIT(6) + #define PHY_CTRL_R14_BYPASS_CTRL_7_0 GENMASK(15, 8) + #define PHY_CTRL_R14_BYPASS_CTRL_15_8 GENMASK(23, 16) + +#define PHY_CTRL_R15 0x3c +#define PHY_CTRL_R16 0x40 + #define PHY_CTRL_R16_MPLL_M GENMASK(8, 0) + #define PHY_CTRL_R16_MPLL_N GENMASK(14, 10) + #define PHY_CTRL_R16_MPLL_TDC_MODE BIT(20) + #define PHY_CTRL_R16_MPLL_SDM_EN BIT(21) + #define PHY_CTRL_R16_MPLL_LOAD BIT(22) + #define PHY_CTRL_R16_MPLL_DCO_SDM_EN BIT(23) + #define PHY_CTRL_R16_MPLL_LOCK_LONG GENMASK(25, 24) + #define PHY_CTRL_R16_MPLL_LOCK_F BIT(26) + #define PHY_CTRL_R16_MPLL_FAST_LOCK BIT(27) + #define PHY_CTRL_R16_MPLL_EN BIT(28) + #define PHY_CTRL_R16_MPLL_RESET BIT(29) + #define PHY_CTRL_R16_MPLL_LOCK BIT(30) + #define PHY_CTRL_R16_MPLL_LOCK_DIG BIT(31) + +#define PHY_CTRL_R17 0x44 + #define PHY_CTRL_R17_MPLL_FRAC_IN GENMASK(13, 0) + #define PHY_CTRL_R17_MPLL_FIX_EN BIT(16) + #define PHY_CTRL_R17_MPLL_LAMBDA1 GENMASK(19, 17) + #define PHY_CTRL_R17_MPLL_LAMBDA0 GENMASK(22, 20) + #define PHY_CTRL_R17_MPLL_FILTER_MODE BIT(23) + #define PHY_CTRL_R17_MPLL_FILTER_PVT2 GENMASK(27, 24) + #define PHY_CTRL_R17_MPLL_FILTER_PVT1 GENMASK(31, 28) + +#define PHY_CTRL_R18 0x48 + #define PHY_CTRL_R18_MPLL_LKW_SEL GENMASK(1, 0) + #define PHY_CTRL_R18_MPLL_LK_W GENMASK(5, 2) + #define PHY_CTRL_R18_MPLL_LK_S GENMASK(11, 6) + #define PHY_CTRL_R18_MPLL_DCO_M_EN BIT(12) + #define PHY_CTRL_R18_MPLL_DCO_CLK_SEL BIT(13) + #define PHY_CTRL_R18_MPLL_PFD_GAIN GENMASK(15, 14) + #define PHY_CTRL_R18_MPLL_ROU GENMASK(18, 16) + #define PHY_CTRL_R18_MPLL_DATA_SEL GENMASK(21, 19) + #define PHY_CTRL_R18_MPLL_BIAS_ADJ GENMASK(23, 22) + #define PHY_CTRL_R18_MPLL_BB_MODE GENMASK(25, 24) + #define PHY_CTRL_R18_MPLL_ALPHA GENMASK(28, 26) + #define PHY_CTRL_R18_MPLL_ADJ_LDO GENMASK(30, 29) + #define PHY_CTRL_R18_MPLL_ACG_RANGE BIT(31) + +#define PHY_CTRL_R19 0x4c +#define PHY_CTRL_R20 0x50 + #define PHY_CTRL_R20_USB2_IDDET_EN BIT(0) + #define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0 GENMASK(3, 1) + #define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN BIT(4) + #define PHY_CTRL_R20_USB2_AMON_EN BIT(5) + #define PHY_CTRL_R20_USB2_CAL_CODE_R5 BIT(6) + #define PHY_CTRL_R20_BYPASS_OTG_DET BIT(7) + #define PHY_CTRL_R20_USB2_DMON_EN BIT(8) + #define PHY_CTRL_R20_USB2_DMON_SEL_3_0 GENMASK(12, 9) + #define PHY_CTRL_R20_USB2_EDGE_DRV_EN BIT(13) + #define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0 GENMASK(15, 14) + #define PHY_CTRL_R20_USB2_BGR_ADJ_4_0 GENMASK(20, 16) + #define PHY_CTRL_R20_USB2_BGR_START BIT(21) + #define PHY_CTRL_R20_USB2_BGR_VREF_4_0 GENMASK(28, 24) + #define PHY_CTRL_R20_USB2_BGR_DBG_1_0 GENMASK(30, 29) + #define PHY_CTRL_R20_BYPASS_CAL_DONE_R5 BIT(31) + +#define PHY_CTRL_R21 0x54 + #define PHY_CTRL_R21_USB2_BGR_FORCE BIT(0) + #define PHY_CTRL_R21_USB2_CAL_ACK_EN BIT(1) + #define PHY_CTRL_R21_USB2_OTG_ACA_EN BIT(2) + #define PHY_CTRL_R21_USB2_TX_STRG_PD BIT(3) + #define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0 GENMASK(5, 4) + #define PHY_CTRL_R21_BYPASS_UTMI_CNTR GENMASK(15, 6) + #define PHY_CTRL_R21_BYPASS_UTMI_REG GENMASK(25, 20) + +#define PHY_CTRL_R22 0x58 +#define PHY_CTRL_R23 0x5c + +#define RESET_COMPLETE_TIME 1000 +#define PLL_RESET_COMPLETE_TIME 100 + +struct phy_meson_g12a_usb2_priv { + struct device *dev; + struct regmap *regmap; + struct clk *clk; + struct reset_control *reset; +}; + +static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = PHY_CTRL_R23, +}; + +static int phy_meson_g12a_usb2_init(struct phy *phy) +{ + struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = reset_control_reset(priv->reset); + if (ret) + return ret; + + udelay(RESET_COMPLETE_TIME); + + /* usb2_otg_aca_en == 0 */ + regmap_update_bits(priv->regmap, PHY_CTRL_R21, + PHY_CTRL_R21_USB2_OTG_ACA_EN, 0); + + /* PLL Setup : 24MHz * 20 / 1 = 480MHz */ + regmap_write(priv->regmap, PHY_CTRL_R16, + FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) | + FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) | + PHY_CTRL_R16_MPLL_LOAD | + FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) | + PHY_CTRL_R16_MPLL_FAST_LOCK | + PHY_CTRL_R16_MPLL_EN | + PHY_CTRL_R16_MPLL_RESET); + + regmap_write(priv->regmap, PHY_CTRL_R17, + FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) | + FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) | + FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) | + FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) | + FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9)); + + regmap_write(priv->regmap, PHY_CTRL_R18, + FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) | + FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) | + FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) | + FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) | + FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) | + PHY_CTRL_R18_MPLL_ACG_RANGE); + + udelay(PLL_RESET_COMPLETE_TIME); + + /* UnReset PLL */ + regmap_write(priv->regmap, PHY_CTRL_R16, + FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) | + FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) | + PHY_CTRL_R16_MPLL_LOAD | + FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) | + PHY_CTRL_R16_MPLL_FAST_LOCK | + PHY_CTRL_R16_MPLL_EN); + + /* PHY Tuning */ + regmap_write(priv->regmap, PHY_CTRL_R20, + FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) | + PHY_CTRL_R20_USB2_OTG_VBUSDET_EN | + FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) | + PHY_CTRL_R20_USB2_EDGE_DRV_EN | + FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0)); + + regmap_write(priv->regmap, PHY_CTRL_R4, + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) | + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) | + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) | + PHY_CTRL_R4_TEST_BYPASS_MODE_EN | + FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) | + FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0)); + + /* Tuning Disconnect Threshold */ + regmap_write(priv->regmap, PHY_CTRL_R3, + FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) | + FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) | + FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3)); + + /* Analog Settings */ + regmap_write(priv->regmap, PHY_CTRL_R14, 0); + regmap_write(priv->regmap, PHY_CTRL_R13, + PHY_CTRL_R13_UPDATE_PMA_SIGNALS | + FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7)); + + return 0; +} + +static int phy_meson_g12a_usb2_exit(struct phy *phy) +{ + struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy); + + return reset_control_reset(priv->reset); +} + +/* set_mode is not needed, mode setting is handled via the UTMI bus */ +static const struct phy_ops phy_meson_g12a_usb2_ops = { + .init = phy_meson_g12a_usb2_init, + .exit = phy_meson_g12a_usb2_exit, + .owner = THIS_MODULE, +}; + +static int phy_meson_g12a_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *res; + struct phy_meson_g12a_usb2_priv *priv; + struct phy *phy; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_meson_g12a_usb2_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->clk = devm_clk_get(dev, "xtal"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + ret = reset_control_deassert(priv->reset); + if (ret) + return ret; + + phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + + return ret; + } + + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id phy_meson_g12a_usb2_of_match[] = { + { .compatible = "amlogic,g12a-usb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match); + +static struct platform_driver phy_meson_g12a_usb2_driver = { + .probe = phy_meson_g12a_usb2_probe, + .driver = { + .name = "phy-meson-g12a-usb2", + .of_match_table = phy_meson_g12a_usb2_of_match, + }, +}; +module_platform_driver(phy_meson_g12a_usb2_driver); + +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Meson G12A USB2 PHY driver"); +MODULE_LICENSE("GPL v2"); |