Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
  x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
  PCI: Increase resource array mask bit size in pcim_iomap_regions()
  PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
  PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
  PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
  x86/PCI: amd: factor out MMCONFIG discovery
  PCI: Enable ATS at the device state restore
  PCI: msi: fix imbalanced refcount of msi irq sysfs objects
  PCI: kconfig: English typo in pci/pcie/Kconfig
  PCI/PM/Runtime: make PCI traces quieter
  PCI: remove pci_create_bus()
  xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
  x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
  x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
  x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
  sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
  sparc/PCI: convert to pci_create_root_bus()
  sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
  powerpc/PCI: convert to pci_create_root_bus()
  powerpc/PCI: split PHB part out of pcibios_map_io_space()
  ...

Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
to the same patches being applied in other branches.

2 files changed, 63 insertions, 56 deletions

diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index bcd5d54b7d4d..7ff10c1e8664 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -562,19 +562,6 @@ dino_fixup_bus(struct pci_bus *bus)
 	/* Firmware doesn't set up card-mode dino, so we have to */
 	if (is_card_dino(&dino_dev->hba.dev->id)) {
 		dino_card_setup(bus, dino_dev->hba.base_addr);
-	} else if(bus->parent == NULL) {
-		/* must have a dino above it, reparent the resources
-		 * into the dino window */
-		int i;
-		struct resource *res = &dino_dev->hba.lmmio_space;
-
-		bus->resource[0] = &(dino_dev->hba.io_space);
-		for(i = 0; i < DINO_MAX_LMMIO_RESOURCES; i++) {
-			if(res[i].flags == 0)
-				break;
-			bus->resource[i+1] = &res[i];
-		}
-
 	} else if (bus->parent) {
 		int i;
 
@@ -927,6 +914,7 @@ static int __init dino_probe(struct parisc_device *dev)
 	const char *version = "unknown";
 	char *name;
 	int is_cujo = 0;
+	LIST_HEAD(resources);
 	struct pci_bus *bus;
 	unsigned long hpa = dev->hpa.start;
 
@@ -1003,26 +991,37 @@ static int __init dino_probe(struct parisc_device *dev)
 
 	dev->dev.platform_data = dino_dev;
 
+	pci_add_resource(&resources, &dino_dev->hba.io_space);
+	if (dino_dev->hba.lmmio_space.flags)
+		pci_add_resource(&resources, &dino_dev->hba.lmmio_space);
+	if (dino_dev->hba.elmmio_space.flags)
+		pci_add_resource(&resources, &dino_dev->hba.elmmio_space);
+	if (dino_dev->hba.gmmio_space.flags)
+		pci_add_resource(&resources, &dino_dev->hba.gmmio_space);
+
 	/*
 	** It's not used to avoid chicken/egg problems
 	** with configuration accessor functions.
 	*/
-	dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
-			 dino_current_bus, &dino_cfg_ops, NULL);
-
-	if(bus) {
-		/* This code *depends* on scanning being single threaded
-		 * if it isn't, this global bus number count will fail
-		 */
-		dino_current_bus = bus->subordinate + 1;
-		pci_bus_assign_resources(bus);
-		pci_bus_add_devices(bus);
-	} else {
+	dino_dev->hba.hba_bus = bus = pci_create_root_bus(&dev->dev,
+			 dino_current_bus, &dino_cfg_ops, NULL, &resources);
+	if (!bus) {
 		printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
 		       dev_name(&dev->dev), dino_current_bus);
+		pci_free_resource_list(&resources);
 		/* increment the bus number in case of duplicates */
 		dino_current_bus++;
+		return 0;
 	}
+
+	bus->subordinate = pci_scan_child_bus(bus);
+
+	/* This code *depends* on scanning being single threaded
+	 * if it isn't, this global bus number count will fail
+	 */
+	dino_current_bus = bus->subordinate + 1;
+	pci_bus_assign_resources(bus);
+	pci_bus_add_devices(bus);
 	return 0;
 }
 
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 3aeb3279c92a..d5f3d753a108 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -653,7 +653,7 @@ lba_fixup_bus(struct pci_bus *bus)
 		}
 	} else {
 		/* Host-PCI Bridge */
-		int err, i;
+		int err;
 
 		DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n",
 			ldev->hba.io_space.name,
@@ -669,9 +669,6 @@ lba_fixup_bus(struct pci_bus *bus)
 			lba_dump_res(&ioport_resource, 2);
 			BUG();
 		}
-		/* advertize Host bridge resources to PCI bus */
-		bus->resource[0] = &(ldev->hba.io_space);
-		i = 1;
 
 		if (ldev->hba.elmmio_space.start) {
 			err = request_resource(&iomem_resource,
@@ -685,35 +682,17 @@ lba_fixup_bus(struct pci_bus *bus)
 
 				/* lba_dump_res(&iomem_resource, 2); */
 				/* BUG(); */
-			} else
-				bus->resource[i++] = &(ldev->hba.elmmio_space);
+			}
 		}
 
-
-		/*   Overlaps with elmmio can (and should) fail here.
-		 *   We will prune (or ignore) the distributed range.
-		 *
-		 *   FIXME: SBA code should register all elmmio ranges first.
-		 *      that would take care of elmmio ranges routed
-		 *	to a different rope (already discovered) from
-		 *	getting registered *after* LBA code has already
-		 *	registered it's distributed lmmio range.
-		 */
-		if (truncate_pat_collision(&iomem_resource,
-				       	&(ldev->hba.lmmio_space))) {
-
-			printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n",
-					(long)ldev->hba.lmmio_space.start,
-					(long)ldev->hba.lmmio_space.end);
-		} else {
+		if (ldev->hba.lmmio_space.flags) {
 			err = request_resource(&iomem_resource, &(ldev->hba.lmmio_space));
 			if (err < 0) {
 				printk(KERN_ERR "FAILED: lba_fixup_bus() request for "
 					"lmmio_space [%lx/%lx]\n",
 					(long)ldev->hba.lmmio_space.start,
 					(long)ldev->hba.lmmio_space.end);
-			} else
-				bus->resource[i++] = &(ldev->hba.lmmio_space);
+			}
 		}
 
 #ifdef CONFIG_64BIT
@@ -728,7 +707,6 @@ lba_fixup_bus(struct pci_bus *bus)
 				lba_dump_res(&iomem_resource, 2);
 				BUG();
 			}
-			bus->resource[i++] = &(ldev->hba.gmmio_space);
 		}
 #endif
 
@@ -1404,6 +1382,7 @@ static int __init
 lba_driver_probe(struct parisc_device *dev)
 {
 	struct lba_device *lba_dev;
+	LIST_HEAD(resources);
 	struct pci_bus *lba_bus;
 	struct pci_ops *cfg_ops;
 	u32 func_class;
@@ -1518,10 +1497,41 @@ lba_driver_probe(struct parisc_device *dev)
 	if (lba_dev->hba.bus_num.start < lba_next_bus)
 		lba_dev->hba.bus_num.start = lba_next_bus;
 
+	/*   Overlaps with elmmio can (and should) fail here.
+	 *   We will prune (or ignore) the distributed range.
+	 *
+	 *   FIXME: SBA code should register all elmmio ranges first.
+	 *      that would take care of elmmio ranges routed
+	 *	to a different rope (already discovered) from
+	 *	getting registered *after* LBA code has already
+	 *	registered it's distributed lmmio range.
+	 */
+	if (truncate_pat_collision(&iomem_resource,
+				   &(lba_dev->hba.lmmio_space))) {
+		printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n",
+				(long)lba_dev->hba.lmmio_space.start,
+				(long)lba_dev->hba.lmmio_space.end);
+		lba_dev->hba.lmmio_space.flags = 0;
+	}
+
+	pci_add_resource(&resources, &lba_dev->hba.io_space);
+	if (lba_dev->hba.elmmio_space.start)
+		pci_add_resource(&resources, &lba_dev->hba.elmmio_space);
+	if (lba_dev->hba.lmmio_space.flags)
+		pci_add_resource(&resources, &lba_dev->hba.lmmio_space);
+	if (lba_dev->hba.gmmio_space.flags)
+		pci_add_resource(&resources, &lba_dev->hba.gmmio_space);
+
 	dev->dev.platform_data = lba_dev;
 	lba_bus = lba_dev->hba.hba_bus =
-		pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
-				cfg_ops, NULL);
+		pci_create_root_bus(&dev->dev, lba_dev->hba.bus_num.start,
+				    cfg_ops, NULL, &resources);
+	if (!lba_bus) {
+		pci_free_resource_list(&resources);
+		return 0;
+	}
+
+	lba_bus->subordinate = pci_scan_child_bus(lba_bus);
 
 	/* This is in lieu of calling pci_assign_unassigned_resources() */
 	if (is_pdc_pat()) {
@@ -1551,10 +1561,8 @@ lba_driver_probe(struct parisc_device *dev)
 		lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
 	}
 
-	if (lba_bus) {
-		lba_next_bus = lba_bus->subordinate + 1;
-		pci_bus_add_devices(lba_bus);
-	}
+	lba_next_bus = lba_bus->subordinate + 1;
+	pci_bus_add_devices(lba_bus);
 
 	/* Whew! Finally done! Tell services we got this one covered. */
 	return 0;