[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback

Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.

With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:

        int (*probe)            (struct pcmcia_device *dev);
        void (*remove)          (struct pcmcia_device *dev);

        int (*suspend)          (struct pcmcia_device *dev);
        int (*resume)           (struct pcmcia_device *dev);

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 11 insertions, 49 deletions

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 21e498fe7b14..48e10b0c7e74 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -105,7 +105,6 @@ module_param(pc_debug, int, 0);
  */
 static void wl3501_config(dev_link_t *link);
 static void wl3501_release(dev_link_t *link);
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args);
 
 /*
  * The dev_info variable is the "key" that is used to match up this
@@ -1954,18 +1953,16 @@ static const struct iw_handler_def wl3501_handler_def = {
  * The dev_link structure is initialized, but we don't actually configure the
  * card at this point -- we wait until we receive a card insertion event.
  */
-static dev_link_t *wl3501_attach(void)
+static int wl3501_attach(struct pcmcia_device *p_dev)
 {
-	client_reg_t client_reg;
 	dev_link_t *link;
 	struct net_device *dev;
 	struct wl3501_card *this;
-	int ret;
 
 	/* Initialize the dev_link_t structure */
 	link = kzalloc(sizeof(*link), GFP_KERNEL);
 	if (!link)
-		goto out;
+		return -ENOMEM;
 
 	/* The io structure describes IO port mapping */
 	link->io.NumPorts1	= 16;
@@ -2001,24 +1998,17 @@ static dev_link_t *wl3501_attach(void)
 	netif_stop_queue(dev);
 	link->priv = link->irq.Instance = dev;
 
-	/* Register with Card Services */
-	link->next		 = wl3501_dev_list;
-	wl3501_dev_list		 = link;
-	client_reg.dev_info	 = &wl3501_dev_info;
-	client_reg.Version	 = 0x0210;
-	client_reg.event_callback_args.client_data = link;
-	ret = pcmcia_register_client(&link->handle, &client_reg);
-	if (ret) {
-		cs_error(link->handle, RegisterClient, ret);
-		wl3501_detach(link->handle);
-		link = NULL;
-	}
-out:
-	return link;
+	link->handle = p_dev;
+	p_dev->instance = link;
+
+	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+	wl3501_config(link);
+
+	return 0;
 out_link:
 	kfree(link);
 	link = NULL;
-	goto out;
+	return -ENOMEM;
 }
 
 #define CS_CHECK(fn, ret) \
@@ -2206,33 +2196,6 @@ static int wl3501_resume(struct pcmcia_device *p_dev)
 }
 
 
-/**
- * wl3501_event - The card status event handler
- * @event - event
- * @pri - priority
- * @args - arguments for this event
- *
- * The card status event handler. Mostly, this schedules other stuff to run
- * after an event is received. A CARD_REMOVAL event also sets some flags to
- * discourage the net drivers from trying to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag to block
- * future accesses to this device. All the functions that actually access the
- * device should check this flag to make sure the card is still present.
- */
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args)
-{
-	dev_link_t *link = args->client_data;
-
-	switch (event) {
-	case CS_EVENT_CARD_INSERTION:
-		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
-		wl3501_config(link);
-		break;
-	}
-	return 0;
-}
-
 static struct pcmcia_device_id wl3501_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0001),
 	PCMCIA_DEVICE_NULL
@@ -2244,8 +2207,7 @@ static struct pcmcia_driver wl3501_driver = {
 	.drv		= {
 		.name	= "wl3501_cs",
 	},
-	.attach		= wl3501_attach,
-	.event		= wl3501_event,
+	.probe		= wl3501_attach,
 	.remove		= wl3501_detach,
 	.id_table	= wl3501_ids,
 	.suspend	= wl3501_suspend,