Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

5 files changed, 12 insertions, 12 deletions

diff --git a/drivers/net/wireless/st/cw1200/main.c b/drivers/net/wireless/st/cw1200/main.c
index 0e51e27d2e3f..dc478cedbde0 100644
--- a/drivers/net/wireless/st/cw1200/main.c
+++ b/drivers/net/wireless/st/cw1200/main.c
@@ -102,7 +102,7 @@ static struct ieee80211_rate cw1200_mcs_rates[] = {
 
 
 #define CHAN2G(_channel, _freq, _flags) {			\
-	.band			= IEEE80211_BAND_2GHZ,		\
+	.band			= NL80211_BAND_2GHZ,		\
 	.center_freq		= (_freq),			\
 	.hw_value		= (_channel),			\
 	.flags			= (_flags),			\
@@ -111,7 +111,7 @@ static struct ieee80211_rate cw1200_mcs_rates[] = {
 }
 
 #define CHAN5G(_channel, _flags) {				\
-	.band			= IEEE80211_BAND_5GHZ,		\
+	.band			= NL80211_BAND_5GHZ,		\
 	.center_freq	= 5000 + (5 * (_channel)),		\
 	.hw_value		= (_channel),			\
 	.flags			= (_flags),			\
@@ -311,12 +311,12 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr,
 
 	hw->sta_data_size = sizeof(struct cw1200_sta_priv);
 
-	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &cw1200_band_2ghz;
+	hw->wiphy->bands[NL80211_BAND_2GHZ] = &cw1200_band_2ghz;
 	if (have_5ghz)
-		hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &cw1200_band_5ghz;
+		hw->wiphy->bands[NL80211_BAND_5GHZ] = &cw1200_band_5ghz;
 
 	/* Channel params have to be cleared before registering wiphy again */
-	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+	for (band = 0; band < NUM_NL80211_BANDS; band++) {
 		struct ieee80211_supported_band *sband = hw->wiphy->bands[band];
 		if (!sband)
 			continue;
diff --git a/drivers/net/wireless/st/cw1200/scan.c b/drivers/net/wireless/st/cw1200/scan.c
index bff81b8d4164..983788156bb0 100644
--- a/drivers/net/wireless/st/cw1200/scan.c
+++ b/drivers/net/wireless/st/cw1200/scan.c
@@ -402,7 +402,7 @@ void cw1200_probe_work(struct work_struct *work)
 	}
 	wsm = (struct wsm_tx *)frame.skb->data;
 	scan.max_tx_rate = wsm->max_tx_rate;
-	scan.band = (priv->channel->band == IEEE80211_BAND_5GHZ) ?
+	scan.band = (priv->channel->band == NL80211_BAND_5GHZ) ?
 		WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
 	if (priv->join_status == CW1200_JOIN_STATUS_STA ||
 	    priv->join_status == CW1200_JOIN_STATUS_IBSS) {
diff --git a/drivers/net/wireless/st/cw1200/sta.c b/drivers/net/wireless/st/cw1200/sta.c
index d0ddcde6c695..daf06a4f842e 100644
--- a/drivers/net/wireless/st/cw1200/sta.c
+++ b/drivers/net/wireless/st/cw1200/sta.c
@@ -1278,7 +1278,7 @@ static void cw1200_do_join(struct cw1200_common *priv)
 	join.dtim_period = priv->join_dtim_period;
 
 	join.channel_number = priv->channel->hw_value;
-	join.band = (priv->channel->band == IEEE80211_BAND_5GHZ) ?
+	join.band = (priv->channel->band == NL80211_BAND_5GHZ) ?
 		WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
 
 	memcpy(join.bssid, bssid, sizeof(join.bssid));
@@ -1462,7 +1462,7 @@ int cw1200_enable_listening(struct cw1200_common *priv)
 	};
 
 	if (priv->channel) {
-		start.band = priv->channel->band == IEEE80211_BAND_5GHZ ?
+		start.band = priv->channel->band == NL80211_BAND_5GHZ ?
 			     WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
 		start.channel_number = priv->channel->hw_value;
 	} else {
@@ -2315,7 +2315,7 @@ static int cw1200_start_ap(struct cw1200_common *priv)
 	struct wsm_start start = {
 		.mode = priv->vif->p2p ?
 				WSM_START_MODE_P2P_GO : WSM_START_MODE_AP,
-		.band = (priv->channel->band == IEEE80211_BAND_5GHZ) ?
+		.band = (priv->channel->band == NL80211_BAND_5GHZ) ?
 				WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G,
 		.channel_number = priv->channel->hw_value,
 		.beacon_interval = conf->beacon_int,
diff --git a/drivers/net/wireless/st/cw1200/txrx.c b/drivers/net/wireless/st/cw1200/txrx.c
index d28bd49cb5fd..3d170287cd0b 100644
--- a/drivers/net/wireless/st/cw1200/txrx.c
+++ b/drivers/net/wireless/st/cw1200/txrx.c
@@ -1079,7 +1079,7 @@ void cw1200_rx_cb(struct cw1200_common *priv,
 
 	hdr->band = ((arg->channel_number & 0xff00) ||
 		     (arg->channel_number > 14)) ?
-			IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
+			NL80211_BAND_5GHZ : NL80211_BAND_2GHZ;
 	hdr->freq = ieee80211_channel_to_frequency(
 			arg->channel_number,
 			hdr->band);
diff --git a/drivers/net/wireless/st/cw1200/wsm.c b/drivers/net/wireless/st/cw1200/wsm.c
index 9e0ca3048657..680d60eabc75 100644
--- a/drivers/net/wireless/st/cw1200/wsm.c
+++ b/drivers/net/wireless/st/cw1200/wsm.c
@@ -849,9 +849,9 @@ static int wsm_startup_indication(struct cw1200_common *priv,
 
 	/* Disable unsupported frequency bands */
 	if (!(priv->wsm_caps.fw_cap & 0x1))
-		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
+		priv->hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL;
 	if (!(priv->wsm_caps.fw_cap & 0x2))
-		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
+		priv->hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL;
 
 	priv->firmware_ready = 1;
 	wake_up(&priv->wsm_startup_done);