Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 672 insertions, 0 deletions

diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
new file mode 100644
index 000000000000..b9fbc5cf6262
--- /dev/null
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -0,0 +1,672 @@
+/*
+ * Marvell Wireless LAN device driver: SDIO specific definitions
+ *
+ * Copyright (C) 2011-2014, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#ifndef	_MWIFIEX_SDIO_H
+#define	_MWIFIEX_SDIO_H
+
+
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include "main.h"
+
+#define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin"
+#define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
+#define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
+#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
+#define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
+#define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
+#define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
+
+#define BLOCK_MODE	1
+#define BYTE_MODE	0
+
+#define REG_PORT			0
+
+#define MWIFIEX_SDIO_IO_PORT_MASK		0xfffff
+
+#define MWIFIEX_SDIO_BYTE_MODE_MASK	0x80000000
+
+#define MWIFIEX_MAX_FUNC2_REG_NUM	13
+#define MWIFIEX_SDIO_SCRATCH_SIZE	10
+
+#define SDIO_MPA_ADDR_BASE		0x1000
+#define CTRL_PORT			0
+#define CTRL_PORT_MASK			0x0001
+
+#define CMD_PORT_UPLD_INT_MASK		(0x1U<<6)
+#define CMD_PORT_DNLD_INT_MASK		(0x1U<<7)
+#define HOST_TERM_CMD53			(0x1U << 2)
+#define REG_PORT			0
+#define MEM_PORT			0x10000
+
+#define CMD53_NEW_MODE			(0x1U << 0)
+#define CMD_PORT_RD_LEN_EN		(0x1U << 2)
+#define CMD_PORT_AUTO_EN		(0x1U << 0)
+#define CMD_PORT_SLCT			0x8000
+#define UP_LD_CMD_PORT_HOST_INT_STATUS	(0x40U)
+#define DN_LD_CMD_PORT_HOST_INT_STATUS	(0x80U)
+
+#define MWIFIEX_MP_AGGR_BUF_SIZE_16K	(16384)
+#define MWIFIEX_MP_AGGR_BUF_SIZE_32K	(32768)
+/* we leave one block of 256 bytes for DMA alignment*/
+#define MWIFIEX_MP_AGGR_BUF_SIZE_MAX    (65280)
+
+/* Misc. Config Register : Auto Re-enable interrupts */
+#define AUTO_RE_ENABLE_INT              BIT(4)
+
+/* Host Control Registers : Configuration */
+#define CONFIGURATION_REG		0x00
+/* Host Control Registers : Host power up */
+#define HOST_POWER_UP			(0x1U << 1)
+
+/* Host Control Registers : Upload host interrupt mask */
+#define UP_LD_HOST_INT_MASK		(0x1U)
+/* Host Control Registers : Download host interrupt mask */
+#define DN_LD_HOST_INT_MASK		(0x2U)
+
+/* Host Control Registers : Upload host interrupt status */
+#define UP_LD_HOST_INT_STATUS		(0x1U)
+/* Host Control Registers : Download host interrupt status */
+#define DN_LD_HOST_INT_STATUS		(0x2U)
+
+/* Host Control Registers : Host interrupt status */
+#define CARD_INT_STATUS_REG		0x28
+
+/* Card Control Registers : Card I/O ready */
+#define CARD_IO_READY                   (0x1U << 3)
+/* Card Control Registers : Download card ready */
+#define DN_LD_CARD_RDY                  (0x1U << 0)
+
+/* Max retry number of CMD53 write */
+#define MAX_WRITE_IOMEM_RETRY		2
+
+/* SDIO Tx aggregation in progress ? */
+#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0)
+
+/* SDIO Tx aggregation buffer room for next packet ? */
+#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len)	\
+						<= a->mpa_tx.buf_size)
+
+/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */
+#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do {		\
+	memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len],			\
+			payload, pkt_len);				\
+	a->mpa_tx.buf_len += pkt_len;					\
+	if (!a->mpa_tx.pkt_cnt)						\
+		a->mpa_tx.start_port = port;				\
+	if (a->mpa_tx.start_port <= port)				\
+		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt));		\
+	else								\
+		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+		\
+						(a->max_ports -	\
+						a->mp_end_port)));	\
+	a->mpa_tx.pkt_cnt++;						\
+} while (0)
+
+/* SDIO Tx aggregation limit ? */
+#define MP_TX_AGGR_PKT_LIMIT_REACHED(a)					\
+			(a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)
+
+/* Reset SDIO Tx aggregation buffer parameters */
+#define MP_TX_AGGR_BUF_RESET(a) do {					\
+	a->mpa_tx.pkt_cnt = 0;						\
+	a->mpa_tx.buf_len = 0;						\
+	a->mpa_tx.ports = 0;						\
+	a->mpa_tx.start_port = 0;					\
+} while (0)
+
+/* SDIO Rx aggregation limit ? */
+#define MP_RX_AGGR_PKT_LIMIT_REACHED(a)					\
+			(a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)
+
+/* SDIO Rx aggregation in progress ? */
+#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)
+
+/* SDIO Rx aggregation buffer room for next packet ? */
+#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len)				\
+			((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)
+
+/* Reset SDIO Rx aggregation buffer parameters */
+#define MP_RX_AGGR_BUF_RESET(a) do {					\
+	a->mpa_rx.pkt_cnt = 0;						\
+	a->mpa_rx.buf_len = 0;						\
+	a->mpa_rx.ports = 0;						\
+	a->mpa_rx.start_port = 0;					\
+} while (0)
+
+/* data structure for SDIO MPA TX */
+struct mwifiex_sdio_mpa_tx {
+	/* multiport tx aggregation buffer pointer */
+	u8 *buf;
+	u32 buf_len;
+	u32 pkt_cnt;
+	u32 ports;
+	u16 start_port;
+	u8 enabled;
+	u32 buf_size;
+	u32 pkt_aggr_limit;
+};
+
+struct mwifiex_sdio_mpa_rx {
+	u8 *buf;
+	u32 buf_len;
+	u32 pkt_cnt;
+	u32 ports;
+	u16 start_port;
+
+	struct sk_buff **skb_arr;
+	u32 *len_arr;
+
+	u8 enabled;
+	u32 buf_size;
+	u32 pkt_aggr_limit;
+};
+
+int mwifiex_bus_register(void);
+void mwifiex_bus_unregister(void);
+
+struct mwifiex_sdio_card_reg {
+	u8 start_rd_port;
+	u8 start_wr_port;
+	u8 base_0_reg;
+	u8 base_1_reg;
+	u8 poll_reg;
+	u8 host_int_enable;
+	u8 host_int_rsr_reg;
+	u8 host_int_status_reg;
+	u8 host_int_mask_reg;
+	u8 status_reg_0;
+	u8 status_reg_1;
+	u8 sdio_int_mask;
+	u32 data_port_mask;
+	u8 io_port_0_reg;
+	u8 io_port_1_reg;
+	u8 io_port_2_reg;
+	u8 max_mp_regs;
+	u8 rd_bitmap_l;
+	u8 rd_bitmap_u;
+	u8 rd_bitmap_1l;
+	u8 rd_bitmap_1u;
+	u8 wr_bitmap_l;
+	u8 wr_bitmap_u;
+	u8 wr_bitmap_1l;
+	u8 wr_bitmap_1u;
+	u8 rd_len_p0_l;
+	u8 rd_len_p0_u;
+	u8 card_misc_cfg_reg;
+	u8 card_cfg_2_1_reg;
+	u8 cmd_rd_len_0;
+	u8 cmd_rd_len_1;
+	u8 cmd_rd_len_2;
+	u8 cmd_rd_len_3;
+	u8 cmd_cfg_0;
+	u8 cmd_cfg_1;
+	u8 cmd_cfg_2;
+	u8 cmd_cfg_3;
+	u8 fw_dump_host_ready;
+	u8 fw_dump_ctrl;
+	u8 fw_dump_start;
+	u8 fw_dump_end;
+	u8 func1_dump_reg_start;
+	u8 func1_dump_reg_end;
+	u8 func1_scratch_reg;
+	u8 func1_spec_reg_num;
+	u8 func1_spec_reg_table[MWIFIEX_MAX_FUNC2_REG_NUM];
+};
+
+struct sdio_mmc_card {
+	struct sdio_func *func;
+	struct mwifiex_adapter *adapter;
+
+	const char *firmware;
+	const struct mwifiex_sdio_card_reg *reg;
+	u8 max_ports;
+	u8 mp_agg_pkt_limit;
+	u16 tx_buf_size;
+	u32 mp_tx_agg_buf_size;
+	u32 mp_rx_agg_buf_size;
+
+	u32 mp_rd_bitmap;
+	u32 mp_wr_bitmap;
+
+	u16 mp_end_port;
+	u32 mp_data_port_mask;
+
+	u8 curr_rd_port;
+	u8 curr_wr_port;
+
+	u8 *mp_regs;
+	bool supports_sdio_new_mode;
+	bool has_control_mask;
+	bool can_dump_fw;
+	bool fw_dump_enh;
+	bool can_auto_tdls;
+	bool can_ext_scan;
+
+	struct mwifiex_sdio_mpa_tx mpa_tx;
+	struct mwifiex_sdio_mpa_rx mpa_rx;
+
+	/* needed for card reset */
+	const struct sdio_device_id *device_id;
+};
+
+struct mwifiex_sdio_device {
+	const char *firmware;
+	const struct mwifiex_sdio_card_reg *reg;
+	u8 max_ports;
+	u8 mp_agg_pkt_limit;
+	u16 tx_buf_size;
+	u32 mp_tx_agg_buf_size;
+	u32 mp_rx_agg_buf_size;
+	bool supports_sdio_new_mode;
+	bool has_control_mask;
+	bool can_dump_fw;
+	bool fw_dump_enh;
+	bool can_auto_tdls;
+	bool can_ext_scan;
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
+	.start_rd_port = 1,
+	.start_wr_port = 1,
+	.base_0_reg = 0x0040,
+	.base_1_reg = 0x0041,
+	.poll_reg = 0x30,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK,
+	.host_int_rsr_reg = 0x1,
+	.host_int_mask_reg = 0x02,
+	.host_int_status_reg = 0x03,
+	.status_reg_0 = 0x60,
+	.status_reg_1 = 0x61,
+	.sdio_int_mask = 0x3f,
+	.data_port_mask = 0x0000fffe,
+	.io_port_0_reg = 0x78,
+	.io_port_1_reg = 0x79,
+	.io_port_2_reg = 0x7A,
+	.max_mp_regs = 64,
+	.rd_bitmap_l = 0x04,
+	.rd_bitmap_u = 0x05,
+	.wr_bitmap_l = 0x06,
+	.wr_bitmap_u = 0x07,
+	.rd_len_p0_l = 0x08,
+	.rd_len_p0_u = 0x09,
+	.card_misc_cfg_reg = 0x6c,
+	.func1_dump_reg_start = 0x0,
+	.func1_dump_reg_end = 0x9,
+	.func1_scratch_reg = 0x60,
+	.func1_spec_reg_num = 5,
+	.func1_spec_reg_table = {0x28, 0x30, 0x34, 0x38, 0x3c},
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0x60,
+	.base_1_reg = 0x61,
+	.poll_reg = 0x50,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+			CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.host_int_rsr_reg = 0x1,
+	.host_int_status_reg = 0x03,
+	.host_int_mask_reg = 0x02,
+	.status_reg_0 = 0xc0,
+	.status_reg_1 = 0xc1,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.io_port_0_reg = 0xD8,
+	.io_port_1_reg = 0xD9,
+	.io_port_2_reg = 0xDA,
+	.max_mp_regs = 184,
+	.rd_bitmap_l = 0x04,
+	.rd_bitmap_u = 0x05,
+	.rd_bitmap_1l = 0x06,
+	.rd_bitmap_1u = 0x07,
+	.wr_bitmap_l = 0x08,
+	.wr_bitmap_u = 0x09,
+	.wr_bitmap_1l = 0x0a,
+	.wr_bitmap_1u = 0x0b,
+	.rd_len_p0_l = 0x0c,
+	.rd_len_p0_u = 0x0d,
+	.card_misc_cfg_reg = 0xcc,
+	.card_cfg_2_1_reg = 0xcd,
+	.cmd_rd_len_0 = 0xb4,
+	.cmd_rd_len_1 = 0xb5,
+	.cmd_rd_len_2 = 0xb6,
+	.cmd_rd_len_3 = 0xb7,
+	.cmd_cfg_0 = 0xb8,
+	.cmd_cfg_1 = 0xb9,
+	.cmd_cfg_2 = 0xba,
+	.cmd_cfg_3 = 0xbb,
+	.fw_dump_host_ready = 0xee,
+	.fw_dump_ctrl = 0xe2,
+	.fw_dump_start = 0xe3,
+	.fw_dump_end = 0xea,
+	.func1_dump_reg_start = 0x0,
+	.func1_dump_reg_end = 0xb,
+	.func1_scratch_reg = 0xc0,
+	.func1_spec_reg_num = 8,
+	.func1_spec_reg_table = {0x4C, 0x50, 0x54, 0x55, 0x58,
+				 0x59, 0x5c, 0x5d},
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0xF8,
+	.base_1_reg = 0xF9,
+	.poll_reg = 0x5C,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+			CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.host_int_rsr_reg = 0x4,
+	.host_int_status_reg = 0x0C,
+	.host_int_mask_reg = 0x08,
+	.status_reg_0 = 0xE8,
+	.status_reg_1 = 0xE9,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.io_port_0_reg = 0xE4,
+	.io_port_1_reg = 0xE5,
+	.io_port_2_reg = 0xE6,
+	.max_mp_regs = 196,
+	.rd_bitmap_l = 0x10,
+	.rd_bitmap_u = 0x11,
+	.rd_bitmap_1l = 0x12,
+	.rd_bitmap_1u = 0x13,
+	.wr_bitmap_l = 0x14,
+	.wr_bitmap_u = 0x15,
+	.wr_bitmap_1l = 0x16,
+	.wr_bitmap_1u = 0x17,
+	.rd_len_p0_l = 0x18,
+	.rd_len_p0_u = 0x19,
+	.card_misc_cfg_reg = 0xd8,
+	.card_cfg_2_1_reg = 0xd9,
+	.cmd_rd_len_0 = 0xc0,
+	.cmd_rd_len_1 = 0xc1,
+	.cmd_rd_len_2 = 0xc2,
+	.cmd_rd_len_3 = 0xc3,
+	.cmd_cfg_0 = 0xc4,
+	.cmd_cfg_1 = 0xc5,
+	.cmd_cfg_2 = 0xc6,
+	.cmd_cfg_3 = 0xc7,
+	.fw_dump_host_ready = 0xcc,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+	.func1_dump_reg_start = 0x10,
+	.func1_dump_reg_end = 0x17,
+	.func1_scratch_reg = 0xe8,
+	.func1_spec_reg_num = 13,
+	.func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D,
+				 0x60, 0x61, 0x62, 0x64,
+				 0x65, 0x66, 0x68, 0x69,
+				 0x6a},
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0x6C,
+	.base_1_reg = 0x6D,
+	.poll_reg = 0x5C,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+			CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.host_int_rsr_reg = 0x4,
+	.host_int_status_reg = 0x0C,
+	.host_int_mask_reg = 0x08,
+	.status_reg_0 = 0x90,
+	.status_reg_1 = 0x91,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.io_port_0_reg = 0xE4,
+	.io_port_1_reg = 0xE5,
+	.io_port_2_reg = 0xE6,
+	.max_mp_regs = 196,
+	.rd_bitmap_l = 0x10,
+	.rd_bitmap_u = 0x11,
+	.rd_bitmap_1l = 0x12,
+	.rd_bitmap_1u = 0x13,
+	.wr_bitmap_l = 0x14,
+	.wr_bitmap_u = 0x15,
+	.wr_bitmap_1l = 0x16,
+	.wr_bitmap_1u = 0x17,
+	.rd_len_p0_l = 0x18,
+	.rd_len_p0_u = 0x19,
+	.card_misc_cfg_reg = 0xd8,
+	.card_cfg_2_1_reg = 0xd9,
+	.cmd_rd_len_0 = 0xc0,
+	.cmd_rd_len_1 = 0xc1,
+	.cmd_rd_len_2 = 0xc2,
+	.cmd_rd_len_3 = 0xc3,
+	.cmd_cfg_0 = 0xc4,
+	.cmd_cfg_1 = 0xc5,
+	.cmd_cfg_2 = 0xc6,
+	.cmd_cfg_3 = 0xc7,
+	.func1_dump_reg_start = 0x10,
+	.func1_dump_reg_end = 0x17,
+	.func1_scratch_reg = 0x90,
+	.func1_spec_reg_num = 13,
+	.func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D, 0x60,
+				 0x61, 0x62, 0x64, 0x65, 0x66,
+				 0x68, 0x69, 0x6a},
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
+	.firmware = SD8786_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+	.can_dump_fw = false,
+	.can_auto_tdls = false,
+	.can_ext_scan = false,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
+	.firmware = SD8787_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+	.can_dump_fw = false,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
+	.firmware = SD8797_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+	.can_dump_fw = false,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
+	.firmware = SD8897_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8897,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+	.can_dump_fw = true,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
+	.firmware = SD8997_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8997,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+	.can_dump_fw = true,
+	.fw_dump_enh = true,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
+	.firmware = SD8887_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8887,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+	.can_dump_fw = false,
+	.can_auto_tdls = true,
+	.can_ext_scan = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
+	.firmware = SD8801_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.can_dump_fw = false,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
+/*
+ * .cmdrsp_complete handler
+ */
+static inline int mwifiex_sdio_cmdrsp_complete(struct mwifiex_adapter *adapter,
+					       struct sk_buff *skb)
+{
+	dev_kfree_skb_any(skb);
+	return 0;
+}
+
+/*
+ * .event_complete handler
+ */
+static inline int mwifiex_sdio_event_complete(struct mwifiex_adapter *adapter,
+					      struct sk_buff *skb)
+{
+	dev_kfree_skb_any(skb);
+	return 0;
+}
+
+static inline bool
+mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+	u8 tmp;
+
+	if (card->curr_rd_port < card->mpa_rx.start_port) {
+		if (card->supports_sdio_new_mode)
+			tmp = card->mp_end_port >> 1;
+		else
+			tmp = card->mp_agg_pkt_limit;
+
+		if (((card->max_ports - card->mpa_rx.start_port) +
+		    card->curr_rd_port) >= tmp)
+			return true;
+	}
+
+	if (!card->supports_sdio_new_mode)
+		return false;
+
+	if ((card->curr_rd_port - card->mpa_rx.start_port) >=
+	    (card->mp_end_port >> 1))
+		return true;
+
+	return false;
+}
+
+static inline bool
+mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+	u16 tmp;
+
+	if (card->curr_wr_port < card->mpa_tx.start_port) {
+		if (card->supports_sdio_new_mode)
+			tmp = card->mp_end_port >> 1;
+		else
+			tmp = card->mp_agg_pkt_limit;
+
+		if (((card->max_ports - card->mpa_tx.start_port) +
+		    card->curr_wr_port) >= tmp)
+			return true;
+	}
+
+	if (!card->supports_sdio_new_mode)
+		return false;
+
+	if ((card->curr_wr_port - card->mpa_tx.start_port) >=
+	    (card->mp_end_port >> 1))
+		return true;
+
+	return false;
+}
+
+/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
+static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card,
+				    u16 rx_len, u8 port)
+{
+	card->mpa_rx.buf_len += rx_len;
+
+	if (!card->mpa_rx.pkt_cnt)
+		card->mpa_rx.start_port = port;
+
+	if (card->supports_sdio_new_mode) {
+		card->mpa_rx.ports |= (1 << port);
+	} else {
+		if (card->mpa_rx.start_port <= port)
+			card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt);
+		else
+			card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1);
+	}
+	card->mpa_rx.skb_arr[card->mpa_rx.pkt_cnt] = NULL;
+	card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = rx_len;
+	card->mpa_rx.pkt_cnt++;
+}
+#endif /* _MWIFIEX_SDIO_H */