Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 238 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
new file mode 100644
index 000000000000..c84a0299d43e
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
@@ -0,0 +1,238 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <linuxwifi@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include "iwl-config.h"
+#include "iwl-agn-hw.h"
+
+/* Highest firmware API version supported */
+#define IWL8000_UCODE_API_MAX	20
+
+/* Oldest version we won't warn about */
+#define IWL8000_UCODE_API_OK	13
+
+/* Lowest firmware API version supported */
+#define IWL8000_UCODE_API_MIN	13
+
+/* NVM versions */
+#define IWL8000_NVM_VERSION		0x0a1d
+#define IWL8000_TX_POWER_VERSION	0xffff /* meaningless */
+
+/* Memory offsets and lengths */
+#define IWL8260_DCCM_OFFSET		0x800000
+#define IWL8260_DCCM_LEN		0x18000
+#define IWL8260_DCCM2_OFFSET		0x880000
+#define IWL8260_DCCM2_LEN		0x8000
+#define IWL8260_SMEM_OFFSET		0x400000
+#define IWL8260_SMEM_LEN		0x68000
+
+#define IWL8000_FW_PRE "iwlwifi-8000"
+#define IWL8000_MODULE_FIRMWARE(api) \
+	IWL8000_FW_PRE "-" __stringify(api) ".ucode"
+
+#define NVM_HW_SECTION_NUM_FAMILY_8000		10
+#define DEFAULT_NVM_FILE_FAMILY_8000B		"nvmData-8000B"
+#define DEFAULT_NVM_FILE_FAMILY_8000C		"nvmData-8000C"
+
+/* Max SDIO RX/TX aggregation sizes of the ADDBA request/response */
+#define MAX_RX_AGG_SIZE_8260_SDIO	21
+#define MAX_TX_AGG_SIZE_8260_SDIO	40
+
+/* Max A-MPDU exponent for HT and VHT */
+#define MAX_HT_AMPDU_EXPONENT_8260_SDIO	IEEE80211_HT_MAX_AMPDU_32K
+#define MAX_VHT_AMPDU_EXPONENT_8260_SDIO	IEEE80211_VHT_MAX_AMPDU_32K
+
+static const struct iwl_base_params iwl8000_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_8000,
+	.num_of_queues = 31,
+	.pll_cfg_val = 0,
+	.shadow_ram_support = true,
+	.led_compensation = 57,
+	.wd_timeout = IWL_LONG_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = true,
+	.pcie_l1_allowed = true,
+};
+
+static const struct iwl_ht_params iwl8000_ht_params = {
+	.stbc = true,
+	.ldpc = true,
+	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
+};
+
+static const struct iwl_tt_params iwl8000_tt_params = {
+	.ct_kill_entry = 115,
+	.ct_kill_exit = 93,
+	.ct_kill_duration = 5,
+	.dynamic_smps_entry = 111,
+	.dynamic_smps_exit = 107,
+	.tx_protection_entry = 112,
+	.tx_protection_exit = 105,
+	.tx_backoff = {
+		{.temperature = 110, .backoff = 200},
+		{.temperature = 111, .backoff = 600},
+		{.temperature = 112, .backoff = 1200},
+		{.temperature = 113, .backoff = 2000},
+		{.temperature = 114, .backoff = 4000},
+	},
+	.support_ct_kill = true,
+	.support_dynamic_smps = true,
+	.support_tx_protection = true,
+	.support_tx_backoff = true,
+};
+
+#define IWL_DEVICE_8000							\
+	.ucode_api_max = IWL8000_UCODE_API_MAX,				\
+	.ucode_api_ok = IWL8000_UCODE_API_OK,				\
+	.ucode_api_min = IWL8000_UCODE_API_MIN,				\
+	.device_family = IWL_DEVICE_FAMILY_8000,			\
+	.max_inst_size = IWL60_RTC_INST_SIZE,				\
+	.max_data_size = IWL60_RTC_DATA_SIZE,				\
+	.base_params = &iwl8000_base_params,				\
+	.led_mode = IWL_LED_RF_STATE,					\
+	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000,		\
+	.features = NETIF_F_RXCSUM,					\
+	.non_shared_ant = ANT_A,					\
+	.dccm_offset = IWL8260_DCCM_OFFSET,				\
+	.dccm_len = IWL8260_DCCM_LEN,					\
+	.dccm2_offset = IWL8260_DCCM2_OFFSET,				\
+	.dccm2_len = IWL8260_DCCM2_LEN,					\
+	.smem_offset = IWL8260_SMEM_OFFSET,				\
+	.smem_len = IWL8260_SMEM_LEN,					\
+	.default_nvm_file_B_step = DEFAULT_NVM_FILE_FAMILY_8000B,	\
+	.default_nvm_file_C_step = DEFAULT_NVM_FILE_FAMILY_8000C,	\
+	.thermal_params = &iwl8000_tt_params,				\
+	.apmg_not_supported = true
+
+const struct iwl_cfg iwl8260_2n_cfg = {
+	.name = "Intel(R) Dual Band Wireless N 8260",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+};
+
+const struct iwl_cfg iwl8260_2ac_cfg = {
+	.name = "Intel(R) Dual Band Wireless AC 8260",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+	.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K,
+};
+
+const struct iwl_cfg iwl8265_2ac_cfg = {
+	.name = "Intel(R) Dual Band Wireless AC 8265",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+	.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K,
+};
+
+const struct iwl_cfg iwl4165_2ac_cfg = {
+	.name = "Intel(R) Dual Band Wireless AC 4165",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+	.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K,
+};
+
+const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
+	.name = "Intel(R) Dual Band Wireless-AC 8260",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+	.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
+	.max_tx_agg_size = MAX_TX_AGG_SIZE_8260_SDIO,
+	.disable_dummy_notification = true,
+	.max_ht_ampdu_exponent  = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
+	.max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
+};
+
+const struct iwl_cfg iwl4165_2ac_sdio_cfg = {
+	.name = "Intel(R) Dual Band Wireless-AC 4165",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+	.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
+	.max_tx_agg_size = MAX_TX_AGG_SIZE_8260_SDIO,
+	.bt_shared_single_ant = true,
+	.disable_dummy_notification = true,
+	.max_ht_ampdu_exponent  = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
+	.max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
+};
+
+MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));