diff options
| author | Wen Gong <wgong@codeaurora.org> | 2020-04-27 16:04:14 +0800 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2020-04-28 12:12:31 +0300 |
| commit | 0f7cb26830a6e740455a7064e46ff1e926197ecb (patch) | |
| tree | bf3a4c0cd5fc2d81ecad98df8a4bb96a38a2b327 /drivers/net/wireless/ath/ath10k/wmi.h | |
| parent | 2289bef25e32808bb6d748edc667ca297792bf8f (diff) | |
| download | lwn-0f7cb26830a6e740455a7064e46ff1e926197ecb.tar.gz lwn-0f7cb26830a6e740455a7064e46ff1e926197ecb.zip | |
ath10k: add rx bitrate report for SDIO
For SDIO chip, its rx indication is struct htt_rx_indication_hl, which
does not include the bitrate info as well as PCIe, for PCIe, it use
function ath10k_htt_rx_h_rates to parse the bitrate info in struct
rx_ppdu_start and then report it to mac80211 via ieee80211_rx_status.
SDIO does not have the same info as PCIe, then iw command can not get
the rx bitrate by "iw wlan0 station dump".
for example, it always show 6.0 MBit/s
localhost ~ # iw wlan0 link
Connected to 3c:28:6d:96:fd:69 (on wlan0)
SSID: kukui_test
freq: 5180
RX: 111800 bytes (595 packets)
TX: 35419 bytes (202 packets)
signal: -41 dBm
rx bitrate: 6.0 MBit/s
This patch is to send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware
for ath10k_sta_statistics and save the rx bitrate for WMI event
WMI_TLV_PEER_STATS_INFO_EVENTID.
This patch only effect SDIO chip, ath10k_mac_sta_get_peer_stats_info
has check for bitrate_statistics of hw_params, this patch only enable
it for "qca6174 hw3.2 sdio".
Tested with QCA6174 SDIO firmware WLAN.RMH.4.4.1-00042.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200427080416.8265-3-wgong@codeaurora.org
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 46740e16f3ce..0f05405bebc0 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -940,6 +940,7 @@ struct wmi_cmd_map { u32 vdev_spectral_scan_configure_cmdid; u32 vdev_spectral_scan_enable_cmdid; u32 request_stats_cmdid; + u32 request_peer_stats_info_cmdid; u32 set_arp_ns_offload_cmdid; u32 network_list_offload_config_cmdid; u32 gtk_offload_cmdid; @@ -4579,6 +4580,13 @@ struct wmi_request_stats_cmd { struct wlan_inst_rssi_args inst_rssi_args; } __packed; +enum wmi_peer_stats_info_request_type { + /* request stats of one specified peer */ + WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01, + /* request stats of all peers belong to specified VDEV */ + WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02, +}; + /* Suspend option */ enum { /* suspend */ |