treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

1 files changed, 8 insertions, 8 deletions

diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index f4500f04147d..70f754abbeca 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -3,7 +3,7 @@ config MKISS
 	tristate "Serial port KISS driver"
 	depends on AX25 && TTY
 	select CRC16
-	---help---
+	help
 	  KISS is a protocol used for the exchange of data between a computer
 	  and a Terminal Node Controller (a small embedded system commonly
 	  used for networking over AX.25 amateur radio connections; it
@@ -20,7 +20,7 @@ config MKISS
 config 6PACK
 	tristate "Serial port 6PACK driver"
 	depends on AX25 && TTY
-	---help---
+	help
 	  6pack is a transmission protocol for the data exchange between your
 	  PC and your TNC (the Terminal Node Controller acts as a kind of
 	  modem connecting your computer's serial port to your radio's
@@ -48,7 +48,7 @@ config BPQETHER
 config DMASCC
 	tristate "High-speed (DMA) SCC driver for AX.25"
 	depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API
-	---help---
+	help
 	  This is a driver for high-speed SCC boards, i.e. those supporting
 	  DMA on one port. You usually use those boards to connect your
 	  computer to an amateur radio modem (such as the WA4DSY 56kbps
@@ -81,7 +81,7 @@ config DMASCC
 config SCC
 	tristate "Z8530 SCC driver"
 	depends on ISA && AX25 && ISA_DMA_API
-	---help---
+	help
 	  These cards are used to connect your Linux box to an amateur radio
 	  in order to communicate with other computers. If you want to use
 	  this, read <file:Documentation/networking/z8530drv.rst> and the
@@ -116,7 +116,7 @@ config BAYCOM_SER_FDX
 	tristate "BAYCOM ser12 fullduplex driver for AX.25"
 	depends on AX25 && !S390
 	select CRC_CCITT
-	---help---
+	help
 	  This is one of two drivers for Baycom style simple amateur radio
 	  modems that connect to a serial interface. The driver supports the
 	  ser12 design in full-duplex mode. In addition, it allows the
@@ -136,7 +136,7 @@ config BAYCOM_SER_HDX
 	tristate "BAYCOM ser12 halfduplex driver for AX.25"
 	depends on AX25 && !S390
 	select CRC_CCITT
-	---help---
+	help
 	  This is one of two drivers for Baycom style simple amateur radio
 	  modems that connect to a serial interface. The driver supports the
 	  ser12 design in half-duplex mode. This is the old driver.  It is
@@ -154,7 +154,7 @@ config BAYCOM_PAR
 	tristate "BAYCOM picpar and par96 driver for AX.25"
 	depends on PARPORT && AX25
 	select CRC_CCITT
-	---help---
+	help
 	  This is a driver for Baycom style simple amateur radio modems that
 	  connect to a parallel interface. The driver supports the picpar and
 	  par96 designs. To configure the driver, use the sethdlc utility
@@ -169,7 +169,7 @@ config BAYCOM_EPP
 	tristate "BAYCOM epp driver for AX.25"
 	depends on PARPORT && AX25 && !64BIT
 	select CRC_CCITT
-	---help---
+	help
 	  This is a driver for Baycom style simple amateur radio modems that
 	  connect to a parallel interface. The driver supports the EPP
 	  designs. To configure the driver, use the sethdlc utility available