Merge branch 'perf/urgent' into perf/core

Pick up the latest fixes, refresh the development tree.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 58 insertions, 36 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 20dcc02431ca..11fc79585491 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -3865,6 +3865,19 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 
 		bnx2x_warpcore_enable_AN_KR2(phy, params, vars);
 	} else {
+		/* Enable Auto-Detect to support 1G over CL37 as well */
+		bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+				 MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10);
+
+		/* Force cl48 sync_status LOW to avoid getting stuck in CL73
+		 * parallel-detect loop when CL73 and CL37 are enabled.
+		 */
+		CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+				  MDIO_AER_BLOCK_AER_REG, 0);
+		bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+				 MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800);
+		bnx2x_set_aer_mmd(params, phy);
+
 		bnx2x_disable_kr2(params, vars, phy);
 	}
 
@@ -8120,17 +8133,20 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 				*edc_mode = EDC_MODE_ACTIVE_DAC;
 			else
 				check_limiting_mode = 1;
-		} else if (copper_module_type &
-			SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
+		} else {
+			*edc_mode = EDC_MODE_PASSIVE_DAC;
+			/* Even in case PASSIVE_DAC indication is not set,
+			 * treat it as a passive DAC cable, since some cables
+			 * don't have this indication.
+			 */
+			if (copper_module_type &
+			    SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
 				DP(NETIF_MSG_LINK,
 				   "Passive Copper cable detected\n");
-				*edc_mode =
-				      EDC_MODE_PASSIVE_DAC;
-		} else {
-			DP(NETIF_MSG_LINK,
-			   "Unknown copper-cable-type 0x%x !!!\n",
-			   copper_module_type);
-			return -EINVAL;
+			} else {
+				DP(NETIF_MSG_LINK,
+				   "Unknown copper-cable-type\n");
+			}
 		}
 		break;
 	}
@@ -10825,9 +10841,9 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
 			   (1<<11));
 
 	if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
-			(phy->speed_cap_mask &
-			PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
-			(phy->req_line_speed == SPEED_1000)) {
+	     (phy->speed_cap_mask &
+	      PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
+	    (phy->req_line_speed == SPEED_1000)) {
 		an_1000_val |= (1<<8);
 		autoneg_val |= (1<<9 | 1<<12);
 		if (phy->req_duplex == DUPLEX_FULL)
@@ -10843,30 +10859,32 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
 			0x09,
 			&an_1000_val);
 
-	/* Set 100 speed advertisement */
-	if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
-			(phy->speed_cap_mask &
-			(PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
-			PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) {
-		an_10_100_val |= (1<<7);
-		/* Enable autoneg and restart autoneg for legacy speeds */
-		autoneg_val |= (1<<9 | 1<<12);
-
-		if (phy->req_duplex == DUPLEX_FULL)
-			an_10_100_val |= (1<<8);
-		DP(NETIF_MSG_LINK, "Advertising 100M\n");
-	}
-
-	/* Set 10 speed advertisement */
-	if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
-			(phy->speed_cap_mask &
-			(PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL |
-			PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) {
-		an_10_100_val |= (1<<5);
-		autoneg_val |= (1<<9 | 1<<12);
-		if (phy->req_duplex == DUPLEX_FULL)
+	/* Advertise 10/100 link speed */
+	if (phy->req_line_speed == SPEED_AUTO_NEG) {
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+			an_10_100_val |= (1<<5);
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 10M-HD\n");
+		}
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
 			an_10_100_val |= (1<<6);
-		DP(NETIF_MSG_LINK, "Advertising 10M\n");
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 10M-FD\n");
+		}
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+			an_10_100_val |= (1<<7);
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 100M-HD\n");
+		}
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+			an_10_100_val |= (1<<8);
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 100M-FD\n");
+		}
 	}
 
 	/* Only 10/100 are allowed to work in FORCE mode */
@@ -13342,6 +13360,10 @@ static u8 bnx2x_analyze_link_error(struct link_params *params,
 	DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up,
 	   old_status, status);
 
+	/* Do not touch the link in case physical link down */
+	if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
+		return 1;
+
 	/* a. Update shmem->link_status accordingly
 	 * b. Update link_vars->link_up
 	 */
@@ -13550,7 +13572,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
 	 */
 	not_kr2_device = (((base_page & 0x8000) == 0) ||
 			  (((base_page & 0x8000) &&
-			    ((next_page & 0xe0) == 0x2))));
+			    ((next_page & 0xe0) == 0x20))));
 
 	/* In case KR2 is already disabled, check if we need to re-enable it */
 	if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {