Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Merge in the left-over fixes before the net-next pull-request.

net/mptcp/subflow.c
  d3295fee3c75 ("mptcp: use proper req destructor for IPv6")
  36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

3 files changed, 10 insertions, 17 deletions

diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index 3222c48ce6ae..ec704222925d 100644
--- a/drivers/net/ethernet/amd/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -824,7 +824,7 @@ lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	lp->memcpy_f( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
 	head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
 	dev->stats.tx_bytes += skb->len;
-	dev_kfree_skb( skb );
+	dev_consume_skb_irq(skb);
 	lp->cur_tx++;
 	while( lp->cur_tx >= TX_RING_SIZE && lp->dirty_tx >= TX_RING_SIZE ) {
 		lp->cur_tx -= TX_RING_SIZE;
diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c
index fb8686214a32..8971665a4b2a 100644
--- a/drivers/net/ethernet/amd/lance.c
+++ b/drivers/net/ethernet/amd/lance.c
@@ -1001,7 +1001,7 @@ static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
 		skb_copy_from_linear_data(skb, &lp->tx_bounce_buffs[entry], skb->len);
 		lp->tx_ring[entry].base =
 			((u32)isa_virt_to_bus((lp->tx_bounce_buffs + entry)) & 0xffffff) | 0x83000000;
-		dev_kfree_skb(skb);
+		dev_consume_skb_irq(skb);
 	} else {
 		lp->tx_skbuff[entry] = skb;
 		lp->tx_ring[entry].base = ((u32)isa_virt_to_bus(skb->data) & 0xffffff) | 0x83000000;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 4064c3e3dd49..c731a04731f8 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -189,6 +189,7 @@ enum xgbe_sfp_cable {
 	XGBE_SFP_CABLE_UNKNOWN = 0,
 	XGBE_SFP_CABLE_ACTIVE,
 	XGBE_SFP_CABLE_PASSIVE,
+	XGBE_SFP_CABLE_FIBER,
 };
 
 enum xgbe_sfp_base {
@@ -236,10 +237,7 @@ enum xgbe_sfp_speed {
 
 #define XGBE_SFP_BASE_BR			12
 #define XGBE_SFP_BASE_BR_1GBE_MIN		0x0a
-#define XGBE_SFP_BASE_BR_1GBE_MAX		0x0d
 #define XGBE_SFP_BASE_BR_10GBE_MIN		0x64
-#define XGBE_SFP_BASE_BR_10GBE_MAX		0x68
-#define XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX	0x78
 
 #define XGBE_SFP_BASE_CU_CABLE_LEN		18
 
@@ -826,29 +824,22 @@ static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata)
 static bool xgbe_phy_sfp_bit_rate(struct xgbe_sfp_eeprom *sfp_eeprom,
 				  enum xgbe_sfp_speed sfp_speed)
 {
-	u8 *sfp_base, min, max;
+	u8 *sfp_base, min;
 
 	sfp_base = sfp_eeprom->base;
 
 	switch (sfp_speed) {
 	case XGBE_SFP_SPEED_1000:
 		min = XGBE_SFP_BASE_BR_1GBE_MIN;
-		max = XGBE_SFP_BASE_BR_1GBE_MAX;
 		break;
 	case XGBE_SFP_SPEED_10000:
 		min = XGBE_SFP_BASE_BR_10GBE_MIN;
-		if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME],
-			   XGBE_MOLEX_VENDOR, XGBE_SFP_BASE_VENDOR_NAME_LEN) == 0)
-			max = XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX;
-		else
-			max = XGBE_SFP_BASE_BR_10GBE_MAX;
 		break;
 	default:
 		return false;
 	}
 
-	return ((sfp_base[XGBE_SFP_BASE_BR] >= min) &&
-		(sfp_base[XGBE_SFP_BASE_BR] <= max));
+	return sfp_base[XGBE_SFP_BASE_BR] >= min;
 }
 
 static void xgbe_phy_free_phy_device(struct xgbe_prv_data *pdata)
@@ -1149,16 +1140,18 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata)
 	phy_data->sfp_tx_fault = xgbe_phy_check_sfp_tx_fault(phy_data);
 	phy_data->sfp_rx_los = xgbe_phy_check_sfp_rx_los(phy_data);
 
-	/* Assume ACTIVE cable unless told it is PASSIVE */
+	/* Assume FIBER cable unless told otherwise */
 	if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_PASSIVE) {
 		phy_data->sfp_cable = XGBE_SFP_CABLE_PASSIVE;
 		phy_data->sfp_cable_len = sfp_base[XGBE_SFP_BASE_CU_CABLE_LEN];
-	} else {
+	} else if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_ACTIVE) {
 		phy_data->sfp_cable = XGBE_SFP_CABLE_ACTIVE;
+	} else {
+		phy_data->sfp_cable = XGBE_SFP_CABLE_FIBER;
 	}
 
 	/* Determine the type of SFP */
-	if (phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE &&
+	if (phy_data->sfp_cable != XGBE_SFP_CABLE_FIBER &&
 	    xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000))
 		phy_data->sfp_base = XGBE_SFP_BASE_10000_CR;
 	else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR)