Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1617 insertions, 0 deletions

diff --git a/drivers/net/dgrs.c b/drivers/net/dgrs.c
new file mode 100644
index 000000000000..7809838e6c4c
--- /dev/null
+++ b/drivers/net/dgrs.c
@@ -0,0 +1,1617 @@
+/*
+ *	Digi RightSwitch SE-X loadable device driver for Linux
+ *
+ *	The RightSwitch is a 4 (EISA) or 6 (PCI) port etherswitch and
+ *	a NIC on an internal board.
+ *
+ *	Author: Rick Richardson, rick@remotepoint.com
+ *	Derived from the SVR4.2 (UnixWare) driver for the same card.
+ *
+ *	Copyright 1995-1996 Digi International Inc.
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU General Public License, incorporated herein by reference.
+ *
+ *	For information on purchasing a RightSwitch SE-4 or SE-6
+ *	board, please contact Digi's sales department at 1-612-912-3444
+ *	or 1-800-DIGIBRD.  Outside the U.S., please check our Web page
+ *	at http://www.dgii.com for sales offices worldwide.
+ *
+ *	OPERATION:
+ *	When compiled as a loadable module, this driver can operate
+ *	the board as either a 4/6 port switch with a 5th or 7th port
+ *	that is a conventional NIC interface as far as the host is
+ *	concerned, OR as 4/6 independent NICs.  To select multi-NIC
+ *	mode, add "nicmode=1" on the insmod load line for the driver.
+ *
+ *	This driver uses the "dev" common ethernet device structure
+ *	and a private "priv" (dev->priv) structure that contains
+ *	mostly DGRS-specific information and statistics.  To keep
+ *	the code for both the switch mode and the multi-NIC mode
+ *	as similar as possible, I have introduced the concept of
+ *	"dev0"/"priv0" and "devN"/"privN"  pointer pairs in subroutines
+ *	where needed.  The first pair of pointers points to the
+ *	"dev" and "priv" structures of the zeroth (0th) device
+ *	interface associated with a board.  The second pair of
+ *	pointers points to the current (Nth) device interface
+ *	for the board: the one for which we are processing data.
+ *
+ *	In switch mode, the pairs of pointers are always the same,
+ *	that is, dev0 == devN and priv0 == privN.  This is just
+ *	like previous releases of this driver which did not support
+ *	NIC mode.
+ *
+ *	In multi-NIC mode, the pairs of pointers may be different.
+ *	We use the devN and privN pointers to reference just the
+ *	name, port number, and statistics for the current interface.
+ *	We use the dev0 and priv0 pointers to access the variables
+ *	that control access to the board, such as board address
+ *	and simulated 82596 variables.  This is because there is
+ *	only one "fake" 82596 that serves as the interface to
+ *	the board.  We do not want to try to keep the variables
+ *	associated with this 82596 in sync across all devices.
+ *
+ *	This scheme works well.  As you will see, except for
+ *	initialization, there is very little difference between
+ *	the two modes as far as this driver is concerned.  On the
+ *	receive side in NIC mode, the interrupt *always* comes in on
+ *	the 0th interface (dev0/priv0).  We then figure out which
+ *	real 82596 port it came in on from looking at the "chan"
+ *	member that the board firmware adds at the end of each
+ *	RBD (a.k.a. TBD). We get the channel number like this:
+ *		int chan = ((I596_RBD *) S2H(cbp->xmit.tbdp))->chan;
+ *
+ *	On the transmit side in multi-NIC mode, we specify the
+ *	output 82596 port by setting the new "dstchan" structure
+ *	member that is at the end of the RFD, like this:
+ *		priv0->rfdp->dstchan = privN->chan;
+ *
+ *	TODO:
+ *	- Multi-NIC mode is not yet supported when the driver is linked
+ *	  into the kernel.
+ *	- Better handling of multicast addresses.
+ *
+ *	Fixes:
+ *	Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
+ *	- fix dgrs_found_device wrt checking kmalloc return and
+ *	rollbacking the partial steps of the whole process when
+ *	one of the devices can't be allocated. Fix SET_MODULE_OWNER
+ *	on the loop to use devN instead of repeated calls to dev.
+ *
+ *	davej <davej@suse.de> - 9/2/2001
+ *	- Enable PCI device before reading ioaddr/irq
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/eisa.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+static char version[] __initdata =
+	"$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $";
+
+/*
+ *	DGRS include files
+ */
+typedef unsigned char uchar;
+typedef unsigned int bool;
+#define vol volatile
+
+#include "dgrs.h"
+#include "dgrs_es4h.h"
+#include "dgrs_plx9060.h"
+#include "dgrs_i82596.h"
+#include "dgrs_ether.h"
+#include "dgrs_asstruct.h"
+#include "dgrs_bcomm.h"
+
+#ifdef CONFIG_PCI
+static struct pci_device_id dgrs_pci_tbl[] = {
+	{ SE6_PCI_VENDOR_ID, SE6_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, },
+	{ }			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, dgrs_pci_tbl);
+#endif
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id dgrs_eisa_tbl[] = {
+	{ "DBI0A01" },
+	{ }
+};
+MODULE_DEVICE_TABLE(eisa, dgrs_eisa_tbl);
+#endif
+
+MODULE_LICENSE("GPL");
+
+
+/*
+ *	Firmware.  Compiled separately for local compilation,
+ *	but #included for Linux distribution.
+ */
+#ifndef NOFW
+	#include "dgrs_firmware.c"
+#else
+	extern int	dgrs_firmnum;
+	extern char	dgrs_firmver[];
+	extern char	dgrs_firmdate[];
+	extern uchar	dgrs_code[];
+	extern int	dgrs_ncode;
+#endif
+
+/*
+ *	Linux out*() is backwards from all other operating systems
+ */
+#define	OUTB(ADDR, VAL)	outb(VAL, ADDR)
+#define	OUTW(ADDR, VAL)	outw(VAL, ADDR)
+#define	OUTL(ADDR, VAL)	outl(VAL, ADDR)
+
+/*
+ *	Macros to convert switch to host and host to switch addresses
+ *	(assumes a local variable priv points to board dependent struct)
+ */
+#define	S2H(A)	( ((unsigned long)(A)&0x00ffffff) + priv0->vmem )
+#define	S2HN(A)	( ((unsigned long)(A)&0x00ffffff) + privN->vmem )
+#define	H2S(A)	( ((char *) (A) - priv0->vmem) + 0xA3000000 )
+
+/*
+ *	Convert a switch address to a "safe" address for use with the
+ *	PLX 9060 DMA registers and the associated HW kludge that allows
+ *	for host access of the DMA registers.
+ */
+#define	S2DMA(A)	( (unsigned long)(A) & 0x00ffffff)
+
+/*
+ *	"Space.c" variables, now settable from module interface
+ *	Use the name below, minus the "dgrs_" prefix.  See init_module().
+ */
+static int	dgrs_debug = 1;
+static int	dgrs_dma = 1;
+static int	dgrs_spantree = -1;
+static int	dgrs_hashexpire = -1;
+static uchar	dgrs_ipaddr[4] = { 0xff, 0xff, 0xff, 0xff};
+static uchar	dgrs_iptrap[4] = { 0xff, 0xff, 0xff, 0xff};
+static __u32	dgrs_ipxnet = -1;
+static int	dgrs_nicmode;
+
+/*
+ *	Private per-board data structure (dev->priv)
+ */
+typedef struct
+{
+	/*
+	 *	Stuff for generic ethercard I/F
+	 */
+	struct net_device_stats	stats;
+
+	/*
+	 *	DGRS specific data
+	 */
+	char		*vmem;
+
+        struct bios_comm *bcomm;        /* Firmware BIOS comm structure */
+        PORT            *port;          /* Ptr to PORT[0] struct in VM */
+        I596_SCB        *scbp;          /* Ptr to SCB struct in VM */
+        I596_RFD        *rfdp;          /* Current RFD list */
+        I596_RBD        *rbdp;          /* Current RBD list */
+
+        volatile int    intrcnt;        /* Count of interrupts */
+
+        /*
+         *      SE-4 (EISA) board variables
+         */
+        uchar		is_reg;		/* EISA: Value for ES4H_IS reg */
+
+        /*
+         *      SE-6 (PCI) board variables
+         *
+         *      The PLX "expansion rom" space is used for DMA register
+         *      access from the host on the SE-6.  These are the physical
+         *      and virtual addresses of that space.
+         */
+        ulong		plxreg;		/* Phys address of PLX chip */
+        char            *vplxreg;	/* Virtual address of PLX chip */
+        ulong		plxdma;		/* Phys addr of PLX "expansion rom" */
+        ulong volatile  *vplxdma;	/* Virtual addr of "expansion rom" */
+        int             use_dma;        /* Flag: use DMA */
+	DMACHAIN	*dmadesc_s;	/* area for DMA chains (SW addr.) */
+	DMACHAIN	*dmadesc_h;	/* area for DMA chains (Host Virtual) */
+
+	/*
+	 *	Multi-NIC mode variables
+	 *
+	 *	All entries of the devtbl[] array are valid for the 0th
+	 *	device (i.e. eth0, but not eth1...eth5).  devtbl[0] is
+	 *	valid for all devices (i.e. eth0, eth1, ..., eth5).
+	 */
+	int		nports;		/* Number of physical ports (4 or 6) */
+	int		chan;		/* Channel # (1-6) for this device */
+	struct net_device	*devtbl[6];	/* Ptrs to N device structs */
+
+} DGRS_PRIV;
+
+
+/*
+ *	reset or un-reset the IDT processor
+ */
+static void
+proc_reset(struct net_device *dev0, int reset)
+{
+	DGRS_PRIV	*priv0 = (DGRS_PRIV *) dev0->priv;
+
+	if (priv0->plxreg)
+	{
+		ulong		val;
+		val = inl(dev0->base_addr + PLX_MISC_CSR);
+		if (reset)
+			val |= SE6_RESET;
+		else
+			val &= ~SE6_RESET;
+		OUTL(dev0->base_addr + PLX_MISC_CSR, val);
+	}
+	else
+	{
+		OUTB(dev0->base_addr + ES4H_PC, reset ? ES4H_PC_RESET : 0);
+	}
+}
+
+/*
+ *	See if the board supports bus master DMA
+ */
+static int
+check_board_dma(struct net_device *dev0)
+{
+	DGRS_PRIV	*priv0 = (DGRS_PRIV *) dev0->priv;
+	ulong	x;
+
+	/*
+	 *	If Space.c says not to use DMA, or if it's not a PLX based
+	 *	PCI board, or if the expansion ROM space is not PCI
+	 *	configured, then return false.
+	 */
+	if (!dgrs_dma || !priv0->plxreg || !priv0->plxdma)
+		return (0);
+
+	/*
+	 *	Set the local address remap register of the "expansion rom"
+	 *	area to 0x80000000 so that we can use it to access the DMA
+	 *	registers from the host side.
+	 */
+	OUTL(dev0->base_addr + PLX_ROM_BASE_ADDR, 0x80000000);
+
+	/*
+	 * Set the PCI region descriptor to:
+	 *      Space 0:
+	 *              disable read-prefetch
+	 *              enable READY
+	 *              enable BURST
+	 *              0 internal wait states
+	 *      Expansion ROM: (used for host DMA register access)
+	 *              disable read-prefetch
+	 *              enable READY
+	 *              disable BURST
+	 *              0 internal wait states
+	 */
+	OUTL(dev0->base_addr + PLX_BUS_REGION, 0x49430343);
+
+	/*
+	 *	Now map the DMA registers into our virtual space
+	 */
+	priv0->vplxdma = (ulong *) ioremap (priv0->plxdma, 256);
+	if (!priv0->vplxdma)
+	{
+		printk("%s: can't *remap() the DMA regs\n", dev0->name);
+		return (0);
+	}
+
+	/*
+	 *	Now test to see if we can access the DMA registers
+	 *	If we write -1 and get back 1FFF, then we accessed the
+	 *	DMA register.  Otherwise, we probably have an old board
+	 *	and wrote into regular RAM.
+	 */
+	priv0->vplxdma[PLX_DMA0_MODE/4] = 0xFFFFFFFF;
+	x = priv0->vplxdma[PLX_DMA0_MODE/4];
+	if (x != 0x00001FFF) {
+		iounmap((void *)priv0->vplxdma);
+		return (0);
+	}
+
+	return (1);
+}
+
+/*
+ *	Initiate DMA using PLX part on PCI board.  Spin the
+ *	processor until completed.  All addresses are physical!
+ *
+ *	If pciaddr is NULL, then it's a chaining DMA, and lcladdr is
+ *	the address of the first DMA descriptor in the chain.
+ *
+ *	If pciaddr is not NULL, then it's a single DMA.
+ *
+ *	In either case, "lcladdr" must have been fixed up to make
+ *	sure the MSB isn't set using the S2DMA macro before passing
+ *	the address to this routine.
+ */
+static int
+do_plx_dma(
+	struct net_device *dev,
+	ulong pciaddr,
+	ulong lcladdr,
+	int len,
+	int to_host
+)
+{
+        int     	i;
+        ulong   	csr = 0;
+	DGRS_PRIV	*priv = (DGRS_PRIV *) dev->priv;
+
+	if (pciaddr)
+	{
+		/*
+		 *	Do a single, non-chain DMA
+		 */
+		priv->vplxdma[PLX_DMA0_PCI_ADDR/4] = pciaddr;
+		priv->vplxdma[PLX_DMA0_LCL_ADDR/4] = lcladdr;
+		priv->vplxdma[PLX_DMA0_SIZE/4] = len;
+		priv->vplxdma[PLX_DMA0_DESCRIPTOR/4] = to_host
+					? PLX_DMA_DESC_TO_HOST
+					: PLX_DMA_DESC_TO_BOARD;
+		priv->vplxdma[PLX_DMA0_MODE/4] =
+					  PLX_DMA_MODE_WIDTH32
+					| PLX_DMA_MODE_WAITSTATES(0)
+					| PLX_DMA_MODE_READY
+					| PLX_DMA_MODE_NOBTERM
+					| PLX_DMA_MODE_BURST
+					| PLX_DMA_MODE_NOCHAIN;
+	}
+	else
+	{
+		/*
+		 *	Do a chaining DMA
+		 */
+		priv->vplxdma[PLX_DMA0_MODE/4] =
+					  PLX_DMA_MODE_WIDTH32
+					| PLX_DMA_MODE_WAITSTATES(0)
+					| PLX_DMA_MODE_READY
+					| PLX_DMA_MODE_NOBTERM
+					| PLX_DMA_MODE_BURST
+					| PLX_DMA_MODE_CHAIN;
+		priv->vplxdma[PLX_DMA0_DESCRIPTOR/4] = lcladdr;
+	}
+
+	priv->vplxdma[PLX_DMA_CSR/4] =
+				PLX_DMA_CSR_0_ENABLE | PLX_DMA_CSR_0_START;
+
+        /*
+	 *	Wait for DMA to complete
+	 */
+        for (i = 0; i < 1000000; ++i)
+        {
+		/*
+		 *	Spin the host CPU for 1 usec, so we don't thrash
+		 *	the PCI bus while the PLX 9060 is doing DMA.
+		 */
+		udelay(1);
+
+		csr = (volatile unsigned long) priv->vplxdma[PLX_DMA_CSR/4];
+
+                if (csr & PLX_DMA_CSR_0_DONE)
+                        break;
+        }
+
+        if ( ! (csr & PLX_DMA_CSR_0_DONE) )
+        {
+		printk("%s: DMA done never occurred. DMA disabled.\n",
+			dev->name);
+		priv->use_dma = 0;
+                return 1;
+        }
+        return 0;
+}
+
+/*
+ *	dgrs_rcv_frame()
+ *
+ *	Process a received frame.  This is called from the interrupt
+ *	routine, and works for both switch mode and multi-NIC mode.
+ *
+ *	Note that when in multi-NIC mode, we want to always access the
+ *	hardware using the dev and priv structures of the first port,
+ *	so that we are using only one set of variables to maintain
+ *	the board interface status, but we want to use the Nth port
+ *	dev and priv structures to maintain statistics and to pass
+ *	the packet up.
+ *
+ *	Only the first device structure is attached to the interrupt.
+ *	We use the special "chan" variable at the end of the first RBD
+ *	to select the Nth device in multi-NIC mode.
+ *
+ *	We currently do chained DMA on a per-packet basis when the
+ *	packet is "long", and we spin the CPU a short time polling
+ *	for DMA completion.  This avoids a second interrupt overhead,
+ *	and gives the best performance for light traffic to the host.
+ *
+ *	However, a better scheme that could be implemented would be
+ *	to see how many packets are outstanding for the host, and if
+ *	the number is "large", create a long chain to DMA several
+ *	packets into the host in one go.  In this case, we would set
+ *	up some state variables to let the host CPU continue doing
+ *	other things until a DMA completion interrupt comes along.
+ */
+static void
+dgrs_rcv_frame(
+	struct net_device	*dev0,
+	DGRS_PRIV	*priv0,
+	I596_CB		*cbp
+)
+{
+	int		len;
+	I596_TBD	*tbdp;
+	struct sk_buff	*skb;
+	uchar		*putp;
+	uchar		*p;
+	struct net_device	*devN;
+	DGRS_PRIV	*privN;
+
+	/*
+	 *	Determine Nth priv and dev structure pointers
+	 */
+	if (dgrs_nicmode)
+	{	/* Multi-NIC mode */
+		int chan = ((I596_RBD *) S2H(cbp->xmit.tbdp))->chan;
+
+		devN = priv0->devtbl[chan-1];
+		/*
+		 * If devN is null, we got an interrupt before the I/F
+		 * has been initialized.  Pitch the packet.
+		 */
+		if (devN == NULL)
+			goto out;
+		privN = (DGRS_PRIV *) devN->priv;
+	}
+	else
+	{	/* Switch mode */
+		devN = dev0;
+		privN = priv0;
+	}
+
+	if (0) printk("%s: rcv len=%ld\n", devN->name, cbp->xmit.count);
+
+	/*
+	 *	Allocate a message block big enough to hold the whole frame
+	 */
+	len = cbp->xmit.count;
+	if ((skb = dev_alloc_skb(len+5)) == NULL)
+	{
+		printk("%s: dev_alloc_skb failed for rcv buffer\n", devN->name);
+		++privN->stats.rx_dropped;
+		/* discarding the frame */
+		goto out;
+	}
+	skb->dev = devN;
+	skb_reserve(skb, 2);	/* Align IP header */
+
+again:
+	putp = p = skb_put(skb, len);
+
+	/*
+	 *	There are three modes here for doing the packet copy.
+	 *	If we have DMA, and the packet is "long", we use the
+	 *	chaining mode of DMA.  If it's shorter, we use single
+	 *	DMA's.  Otherwise, we use memcpy().
+	 */
+	if (priv0->use_dma && priv0->dmadesc_h && len > 64)
+	{
+		/*
+		 *	If we can use DMA and it's a long frame, copy it using
+		 *	DMA chaining.
+		 */
+		DMACHAIN	*ddp_h;	/* Host virtual DMA desc. pointer */
+		DMACHAIN	*ddp_s;	/* Switch physical DMA desc. pointer */
+		uchar		*phys_p;
+
+		/*
+		 *	Get the physical address of the STREAMS buffer.
+		 *	NOTE: allocb() guarantees that the whole buffer
+		 *	is in a single page if the length < 4096.
+		 */
+		phys_p = (uchar *) virt_to_phys(putp);
+
+		ddp_h = priv0->dmadesc_h;
+		ddp_s = priv0->dmadesc_s;
+		tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
+		for (;;)
+		{
+			int	count;
+			int	amt;
+
+			count = tbdp->count;
+			amt = count & 0x3fff;
+			if (amt == 0)
+				break; /* For safety */
+			if ( (p-putp) >= len)
+			{
+				printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
+				proc_reset(dev0, 1);	/* Freeze IDT */
+				break; /* For Safety */
+			}
+
+			ddp_h->pciaddr = (ulong) phys_p;
+			ddp_h->lcladdr = S2DMA(tbdp->buf);
+			ddp_h->len = amt;
+
+			phys_p += amt;
+			p += amt;
+
+			if (count & I596_TBD_EOF)
+			{
+				ddp_h->next = PLX_DMA_DESC_TO_HOST
+						| PLX_DMA_DESC_EOC;
+				++ddp_h;
+				break;
+			}
+			else
+			{
+				++ddp_s;
+				ddp_h->next = PLX_DMA_DESC_TO_HOST
+						| (ulong) ddp_s;
+				tbdp = (I596_TBD *) S2H(tbdp->next);
+				++ddp_h;
+			}
+		}
+		if (ddp_h - priv0->dmadesc_h)
+		{
+			int	rc;
+
+			rc = do_plx_dma(dev0,
+				0, (ulong) priv0->dmadesc_s, len, 0);
+			if (rc)
+			{
+				printk("%s: Chained DMA failure\n", devN->name);
+				goto again;
+			}
+		}
+	}
+	else if (priv0->use_dma)
+	{
+		/*
+		 *	If we can use DMA and it's a shorter frame, copy it
+		 *	using single DMA transfers.
+		 */
+		uchar		*phys_p;
+
+		/*
+		 *	Get the physical address of the STREAMS buffer.
+		 *	NOTE: allocb() guarantees that the whole buffer
+		 *	is in a single page if the length < 4096.
+		 */
+		phys_p = (uchar *) virt_to_phys(putp);
+
+		tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
+		for (;;)
+		{
+			int	count;
+			int	amt;
+			int	rc;
+
+			count = tbdp->count;
+			amt = count & 0x3fff;
+			if (amt == 0)
+				break; /* For safety */
+			if ( (p-putp) >= len)
+			{
+				printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
+				proc_reset(dev0, 1);	/* Freeze IDT */
+				break; /* For Safety */
+			}
+			rc = do_plx_dma(dev0, (ulong) phys_p,
+						S2DMA(tbdp->buf), amt, 1);
+			if (rc)
+			{
+				memcpy(p, S2H(tbdp->buf), amt);
+				printk("%s: Single DMA failed\n", devN->name);
+			}
+			phys_p += amt;
+			p += amt;
+			if (count & I596_TBD_EOF)
+				break;
+			tbdp = (I596_TBD *) S2H(tbdp->next);
+		}
+	}
+	else
+	{
+		/*
+		 *	Otherwise, copy it piece by piece using memcpy()
+		 */
+		tbdp = (I596_TBD *) S2H(cbp->xmit.tbdp);
+		for (;;)
+		{
+			int	count;
+			int	amt;
+
+			count = tbdp->count;
+			amt = count & 0x3fff;
+			if (amt == 0)
+				break; /* For safety */
+			if ( (p-putp) >= len)
+			{
+				printk("%s: cbp = %lx\n", devN->name, (long) H2S(cbp));
+				proc_reset(dev0, 1);	/* Freeze IDT */
+				break; /* For Safety */
+			}
+			memcpy(p, S2H(tbdp->buf), amt);
+			p += amt;
+			if (count & I596_TBD_EOF)
+				break;
+			tbdp = (I596_TBD *) S2H(tbdp->next);
+		}
+	}
+
+	/*
+	 *	Pass the frame to upper half
+	 */
+	skb->protocol = eth_type_trans(skb, devN);
+	netif_rx(skb);
+	devN->last_rx = jiffies;
+	++privN->stats.rx_packets;
+	privN->stats.rx_bytes += len;
+
+out:
+	cbp->xmit.status = I596_CB_STATUS_C | I596_CB_STATUS_OK;
+}
+
+/*
+ *	Start transmission of a frame
+ *
+ *	The interface to the board is simple: we pretend that we are
+ *	a fifth 82596 ethernet controller 'receiving' data, and copy the
+ *	data into the same structures that a real 82596 would.  This way,
+ *	the board firmware handles the host 'port' the same as any other.
+ *
+ *	NOTE: we do not use Bus master DMA for this routine.  Turns out
+ *	that it is not needed.  Slave writes over the PCI bus are about
+ *	as fast as DMA, due to the fact that the PLX part can do burst
+ *	writes.  The same is not true for data being read from the board.
+ *
+ *	For multi-NIC mode, we tell the firmware the desired 82596
+ *	output port by setting the special "dstchan" member at the
+ *	end of the traditional 82596 RFD structure.
+ */
+
+static int dgrs_start_xmit(struct sk_buff *skb, struct net_device *devN)
+{
+	DGRS_PRIV	*privN = (DGRS_PRIV *) devN->priv;
+	struct net_device	*dev0;
+	DGRS_PRIV	*priv0;
+	I596_RBD	*rbdp;
+	int		count;
+	int		i, len, amt;
+
+	/*
+	 *	Determine 0th priv and dev structure pointers
+	 */
+	if (dgrs_nicmode)
+	{
+		dev0 = privN->devtbl[0];
+		priv0 = (DGRS_PRIV *) dev0->priv;
+	}
+	else
+	{
+		dev0 = devN;
+		priv0 = privN;
+	}
+
+	if (dgrs_debug > 1)
+		printk("%s: xmit len=%d\n", devN->name, (int) skb->len);
+
+	devN->trans_start = jiffies;
+	netif_start_queue(devN);
+
+	if (priv0->rfdp->cmd & I596_RFD_EL)
+	{	/* Out of RFD's */
+		if (0) printk("%s: NO RFD's\n", devN->name);
+		goto no_resources;
+	}
+
+	rbdp = priv0->rbdp;
+	count = 0;
+	priv0->rfdp->rbdp = (I596_RBD *) H2S(rbdp);
+
+	i = 0; len = skb->len;
+	for (;;)
+	{
+		if (rbdp->size & I596_RBD_EL)
+		{	/* Out of RBD's */
+			if (0) printk("%s: NO RBD's\n", devN->name);
+			goto no_resources;
+		}
+
+		amt = min_t(unsigned int, len, rbdp->size - count);
+		memcpy( (char *) S2H(rbdp->buf) + count, skb->data + i, amt);
+		i += amt;
+		count += amt;
+		len -= amt;
+		if (len == 0)
+		{
+			if (skb->len < 60)
+				rbdp->count = 60 | I596_RBD_EOF;
+			else
+				rbdp->count = count | I596_RBD_EOF;
+			rbdp = (I596_RBD *) S2H(rbdp->next);
+			goto frame_done;
+		}
+		else if (count < 32)
+		{
+			/* More data to come, but we used less than 32
+			 * bytes of this RBD.  Keep filling this RBD.
+			 */
+			{}	/* Yes, we do nothing here */
+		}
+		else
+		{
+			rbdp->count = count;
+			rbdp = (I596_RBD *) S2H(rbdp->next);
+			count = 0;
+		}
+	}
+
+frame_done:
+	priv0->rbdp = rbdp;
+	if (dgrs_nicmode)
+		priv0->rfdp->dstchan = privN->chan;
+	priv0->rfdp->status = I596_RFD_C | I596_RFD_OK;
+	priv0->rfdp = (I596_RFD *) S2H(priv0->rfdp->next);
+
+	++privN->stats.tx_packets;
+
+	dev_kfree_skb (skb);
+	return (0);
+
+no_resources:
+	priv0->scbp->status |= I596_SCB_RNR;	/* simulate I82596 */
+	return (-EAGAIN);
+}
+
+/*
+ *	Open the interface
+ */
+static int
+dgrs_open( struct net_device *dev )
+{
+	netif_start_queue(dev);
+	return (0);
+}
+
+/*
+ *	Close the interface
+ */
+static int dgrs_close( struct net_device *dev )
+{
+	netif_stop_queue(dev);
+	return (0);
+}
+
+/*
+ *	Get statistics
+ */
+static struct net_device_stats *dgrs_get_stats( struct net_device *dev )
+{
+	DGRS_PRIV	*priv = (DGRS_PRIV *) dev->priv;
+
+	return (&priv->stats);
+}
+
+/*
+ *	Set multicast list and/or promiscuous mode
+ */
+
+static void dgrs_set_multicast_list( struct net_device *dev)
+{
+	DGRS_PRIV	*priv = (DGRS_PRIV *) dev->priv;
+
+	priv->port->is_promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
+}
+
+/*
+ *	Unique ioctl's
+ */
+static int dgrs_ioctl(struct net_device *devN, struct ifreq *ifr, int cmd)
+{
+	DGRS_PRIV	*privN = (DGRS_PRIV *) devN->priv;
+	DGRS_IOCTL	ioc;
+	int		i;
+
+	if (cmd != DGRSIOCTL)
+		return -EINVAL;
+
+	if(copy_from_user(&ioc, ifr->ifr_data, sizeof(DGRS_IOCTL)))
+		return -EFAULT;
+
+	switch (ioc.cmd)
+	{
+		case DGRS_GETMEM:
+			if (ioc.len != sizeof(ulong))
+				return -EINVAL;
+			if(copy_to_user(ioc.data, &devN->mem_start, ioc.len))
+				return -EFAULT;
+			return (0);
+		case DGRS_SETFILTER:
+			if (!capable(CAP_NET_ADMIN))
+				return -EPERM;
+			if (ioc.port > privN->bcomm->bc_nports)
+				return -EINVAL;
+			if (ioc.filter >= NFILTERS)
+				return -EINVAL;
+			if (ioc.len > privN->bcomm->bc_filter_area_len)
+				return -EINVAL;
+
+			/* Wait for old command to finish */
+			for (i = 0; i < 1000; ++i)
+			{
+				if ( (volatile long) privN->bcomm->bc_filter_cmd <= 0 )
+					break;
+				udelay(1);
+			}
+			if (i >= 1000)
+				return -EIO;
+
+			privN->bcomm->bc_filter_port = ioc.port;
+			privN->bcomm->bc_filter_num = ioc.filter;
+			privN->bcomm->bc_filter_len = ioc.len;
+	
+			if (ioc.len)
+			{
+				if(copy_from_user(S2HN(privN->bcomm->bc_filter_area),
+					ioc.data, ioc.len))
+					return -EFAULT;
+				privN->bcomm->bc_filter_cmd = BC_FILTER_SET;
+			}
+			else
+				privN->bcomm->bc_filter_cmd = BC_FILTER_CLR;
+			return(0);
+		default:
+			return -EOPNOTSUPP;
+	}
+}
+
+/*
+ *	Process interrupts
+ *
+ *	dev, priv will always refer to the 0th device in Multi-NIC mode.
+ */
+
+static irqreturn_t dgrs_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct net_device	*dev0 = (struct net_device *) dev_id;
+	DGRS_PRIV	*priv0 = (DGRS_PRIV *) dev0->priv;
+	I596_CB		*cbp;
+	int		cmd;
+	int		i;
+
+	++priv0->intrcnt;
+	if (1) ++priv0->bcomm->bc_cnt[4];
+	if (0)
+	{
+		static int cnt = 100;
+		if (--cnt > 0)
+		printk("%s: interrupt: irq %d\n", dev0->name, irq);
+	}
+
+	/*
+	 *	Get 596 command
+	 */
+	cmd = priv0->scbp->cmd;
+
+	/*
+	 *	See if RU has been restarted
+	 */
+	if ( (cmd & I596_SCB_RUC) == I596_SCB_RUC_START)
+	{
+		if (0) printk("%s: RUC start\n", dev0->name);
+		priv0->rfdp = (I596_RFD *) S2H(priv0->scbp->rfdp);
+		priv0->rbdp = (I596_RBD *) S2H(priv0->rfdp->rbdp);
+		priv0->scbp->status &= ~(I596_SCB_RNR|I596_SCB_RUS);
+		/*
+		 * Tell upper half (halves)
+		 */
+		if (dgrs_nicmode)
+		{
+			for (i = 0; i < priv0->nports; ++i)
+				netif_wake_queue (priv0->devtbl[i]);
+		}
+		else
+			netif_wake_queue (dev0);
+		/* if (bd->flags & TX_QUEUED)
+			DL_sched(bd, bdd); */
+	}
+
+	/*
+	 *	See if any CU commands to process
+	 */
+	if ( (cmd & I596_SCB_CUC) != I596_SCB_CUC_START)
+	{
+		priv0->scbp->cmd = 0;	/* Ignore all other commands */
+		goto ack_intr;
+	}
+	priv0->scbp->status &= ~(I596_SCB_CNA|I596_SCB_CUS);
+
+	/*
+	 *	Process a command
+	 */
+	cbp = (I596_CB *) S2H(priv0->scbp->cbp);
+	priv0->scbp->cmd = 0;	/* Safe to clear the command */
+	for (;;)
+	{
+		switch (cbp->nop.cmd & I596_CB_CMD)
+		{
+		case I596_CB_CMD_XMIT:
+			dgrs_rcv_frame(dev0, priv0, cbp);
+			break;
+		default:
+			cbp->nop.status = I596_CB_STATUS_C | I596_CB_STATUS_OK;
+			break;
+		}
+		if (cbp->nop.cmd & I596_CB_CMD_EL)
+			break;
+		cbp = (I596_CB *) S2H(cbp->nop.next);
+	}
+	priv0->scbp->status |= I596_SCB_CNA;
+
+	/*
+	 * Ack the interrupt
+	 */
+ack_intr:
+	if (priv0->plxreg)
+		OUTL(dev0->base_addr + PLX_LCL2PCI_DOORBELL, 1);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *	Download the board firmware
+ */
+static int __init 
+dgrs_download(struct net_device *dev0)
+{
+	DGRS_PRIV	*priv0 = (DGRS_PRIV *) dev0->priv;
+	int		is;
+	unsigned long	i;
+
+	static int	iv2is[16] = {
+				0, 0, 0, ES4H_IS_INT3,
+				0, ES4H_IS_INT5, 0, ES4H_IS_INT7,
+				0, 0, ES4H_IS_INT10, ES4H_IS_INT11,
+				ES4H_IS_INT12, 0, 0, ES4H_IS_INT15 };
+
+	/*
+	 * Map in the dual port memory
+	 */
+	priv0->vmem = ioremap(dev0->mem_start, 2048*1024);
+	if (!priv0->vmem)
+	{
+		printk("%s: cannot map in board memory\n", dev0->name);
+		return -ENXIO;
+	}
+
+	/*
+	 *	Hold the processor and configure the board addresses
+	 */
+	if (priv0->plxreg)
+	{	/* PCI bus */
+		proc_reset(dev0, 1);
+	}
+	else
+	{	/* EISA bus */
+		is = iv2is[dev0->irq & 0x0f];
+		if (!is)
+		{
+			printk("%s: Illegal IRQ %d\n", dev0->name, dev0->irq);
+			iounmap(priv0->vmem);
+			priv0->vmem = NULL;
+			return -ENXIO;
+		}
+		OUTB(dev0->base_addr + ES4H_AS_31_24,
+			(uchar) (dev0->mem_start >> 24) );
+		OUTB(dev0->base_addr + ES4H_AS_23_16,
+			(uchar) (dev0->mem_start >> 16) );
+		priv0->is_reg = ES4H_IS_LINEAR | is |
+			((uchar) (dev0->mem_start >> 8) & ES4H_IS_AS15);
+		OUTB(dev0->base_addr + ES4H_IS, priv0->is_reg);
+		OUTB(dev0->base_addr + ES4H_EC, ES4H_EC_ENABLE);
+		OUTB(dev0->base_addr + ES4H_PC, ES4H_PC_RESET);
+		OUTB(dev0->base_addr + ES4H_MW, ES4H_MW_ENABLE | 0x00);
+	}
+
+	/*
+	 *	See if we can do DMA on the SE-6
+	 */
+	priv0->use_dma = check_board_dma(dev0);
+	if (priv0->use_dma)
+		printk("%s: Bus Master DMA is enabled.\n", dev0->name);
+
+	/*
+	 * Load and verify the code at the desired address
+	 */
+	memcpy(priv0->vmem, dgrs_code, dgrs_ncode);	/* Load code */
+	if (memcmp(priv0->vmem, dgrs_code, dgrs_ncode))
+	{
+		iounmap(priv0->vmem);
+		priv0->vmem = NULL;
+		printk("%s: download compare failed\n", dev0->name);
+		return -ENXIO;
+	}
+
+	/*
+	 * Configurables
+	 */
+	priv0->bcomm = (struct bios_comm *) (priv0->vmem + 0x0100);
+	priv0->bcomm->bc_nowait = 1;	/* Tell board to make printf not wait */
+	priv0->bcomm->bc_squelch = 0;	/* Flag from Space.c */
+	priv0->bcomm->bc_150ohm = 0;	/* Flag from Space.c */
+
+	priv0->bcomm->bc_spew = 0;	/* Debug flag from Space.c */
+	priv0->bcomm->bc_maxrfd = 0;	/* Debug flag from Space.c */
+	priv0->bcomm->bc_maxrbd = 0;	/* Debug flag from Space.c */
+
+	/*
+	 * Tell board we are operating in switch mode (1) or in
+	 * multi-NIC mode (2).
+	 */
+	priv0->bcomm->bc_host = dgrs_nicmode ? BC_MULTINIC : BC_SWITCH;
+
+	/*
+	 * Request memory space on board for DMA chains
+	 */
+	if (priv0->use_dma)
+		priv0->bcomm->bc_hostarea_len = (2048/64) * 16;
+
+	/*
+	 * NVRAM configurables from Space.c
+	 */
+	priv0->bcomm->bc_spantree = dgrs_spantree;
+	priv0->bcomm->bc_hashexpire = dgrs_hashexpire;
+	memcpy(priv0->bcomm->bc_ipaddr, dgrs_ipaddr, 4);
+	memcpy(priv0->bcomm->bc_iptrap, dgrs_iptrap, 4);
+	memcpy(priv0->bcomm->bc_ipxnet, &dgrs_ipxnet, 4);
+
+	/*
+	 * Release processor, wait 8 seconds for board to initialize
+	 */
+	proc_reset(dev0, 0);
+
+	for (i = jiffies + 8 * HZ; time_after(i, jiffies); )
+	{
+		barrier();		/* Gcc 2.95 needs this */
+		if (priv0->bcomm->bc_status >= BC_RUN)
+			break;
+	}
+
+	if (priv0->bcomm->bc_status < BC_RUN)
+	{
+		printk("%s: board not operating\n", dev0->name);
+		iounmap(priv0->vmem);
+		priv0->vmem = NULL;
+		return -ENXIO;
+	}
+
+	priv0->port = (PORT *) S2H(priv0->bcomm->bc_port);
+	priv0->scbp = (I596_SCB *) S2H(priv0->port->scbp);
+	priv0->rfdp = (I596_RFD *) S2H(priv0->scbp->rfdp);
+	priv0->rbdp = (I596_RBD *) S2H(priv0->rfdp->rbdp);
+
+	priv0->scbp->status = I596_SCB_CNA;	/* CU is idle */
+
+	/*
+	 *	Get switch physical and host virtual pointers to DMA
+	 *	chaining area.  NOTE: the MSB of the switch physical
+	 *	address *must* be turned off.  Otherwise, the HW kludge
+	 *	that allows host access of the PLX DMA registers will
+	 *	erroneously select the PLX registers.
+	 */
+	priv0->dmadesc_s = (DMACHAIN *) S2DMA(priv0->bcomm->bc_hostarea);
+	if (priv0->dmadesc_s)
+		priv0->dmadesc_h = (DMACHAIN *) S2H(priv0->dmadesc_s);
+	else
+		priv0->dmadesc_h = NULL;
+
+	/*
+	 *	Enable board interrupts
+	 */
+	if (priv0->plxreg)
+	{	/* PCI bus */
+		OUTL(dev0->base_addr + PLX_INT_CSR,
+			inl(dev0->base_addr + PLX_INT_CSR)
+			| PLX_PCI_DOORBELL_IE);	/* Enable intr to host */
+		OUTL(dev0->base_addr + PLX_LCL2PCI_DOORBELL, 1);
+	}
+	else
+	{	/* EISA bus */
+	}
+
+	return (0);
+}
+
+/*
+ *	Probe (init) a board
+ */
+static int __init 
+dgrs_probe1(struct net_device *dev)
+{
+	DGRS_PRIV	*priv = (DGRS_PRIV *) dev->priv;
+	unsigned long	i;
+	int		rc;
+
+	printk("%s: Digi RightSwitch io=%lx mem=%lx irq=%d plx=%lx dma=%lx\n",
+		dev->name, dev->base_addr, dev->mem_start, dev->irq,
+		priv->plxreg, priv->plxdma);
+
+	/*
+	 *	Download the firmware and light the processor
+	 */
+	rc = dgrs_download(dev);
+	if (rc)
+		goto err_out;
+
+	/*
+	 * Get ether address of board
+	 */
+	printk("%s: Ethernet address", dev->name);
+	memcpy(dev->dev_addr, priv->port->ethaddr, 6);
+	for (i = 0; i < 6; ++i)
+		printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
+	printk("\n");
+
+	if (dev->dev_addr[0] & 1)
+	{
+		printk("%s: Illegal Ethernet Address\n", dev->name);
+		rc = -ENXIO;
+		goto err_out;
+	}
+
+	/*
+	 *	ACK outstanding interrupts, hook the interrupt,
+	 *	and verify that we are getting interrupts from the board.
+	 */
+	if (priv->plxreg)
+		OUTL(dev->base_addr + PLX_LCL2PCI_DOORBELL, 1);
+	
+	rc = request_irq(dev->irq, &dgrs_intr, SA_SHIRQ, "RightSwitch", dev);
+	if (rc)
+		goto err_out;
+
+	priv->intrcnt = 0;
+	for (i = jiffies + 2*HZ + HZ/2; time_after(i, jiffies); )
+	{
+		cpu_relax();
+		if (priv->intrcnt >= 2)
+			break;
+	}
+	if (priv->intrcnt < 2)
+	{
+		printk(KERN_ERR "%s: Not interrupting on IRQ %d (%d)\n",
+				dev->name, dev->irq, priv->intrcnt);
+		rc = -ENXIO;
+		goto err_free_irq;
+	}
+
+	/*
+	 *	Entry points...
+	 */
+	dev->open = &dgrs_open;
+	dev->stop = &dgrs_close;
+	dev->get_stats = &dgrs_get_stats;
+	dev->hard_start_xmit = &dgrs_start_xmit;
+	dev->set_multicast_list = &dgrs_set_multicast_list;
+	dev->do_ioctl = &dgrs_ioctl;
+
+	return rc;
+
+err_free_irq:
+	free_irq(dev->irq, dev);
+err_out:
+       	return rc;
+}
+
+static int __init 
+dgrs_initclone(struct net_device *dev)
+{
+	DGRS_PRIV	*priv = (DGRS_PRIV *) dev->priv;
+	int		i;
+
+	printk("%s: Digi RightSwitch port %d ",
+		dev->name, priv->chan);
+	for (i = 0; i < 6; ++i)
+		printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
+	printk("\n");
+
+	return (0);
+}
+
+static struct net_device * __init 
+dgrs_found_device(
+	int		io,
+	ulong		mem,
+	int		irq,
+	ulong		plxreg,
+	ulong		plxdma,
+	struct device   *pdev
+)
+{
+	DGRS_PRIV *priv;
+	struct net_device *dev;
+	int i, ret = -ENOMEM;
+
+	dev = alloc_etherdev(sizeof(DGRS_PRIV));
+	if (!dev)
+		goto err0;
+
+	priv = (DGRS_PRIV *)dev->priv;
+
+	dev->base_addr = io;
+	dev->mem_start = mem;
+	dev->mem_end = mem + 2048 * 1024 - 1;
+	dev->irq = irq;
+	priv->plxreg = plxreg;
+	priv->plxdma = plxdma;
+	priv->vplxdma = NULL;
+
+	priv->chan = 1;
+	priv->devtbl[0] = dev;
+
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, pdev);
+	
+	ret = dgrs_probe1(dev);
+	if (ret) 
+		goto err1;
+
+	ret = register_netdev(dev);
+	if (ret)
+		goto err2;
+
+	if ( !dgrs_nicmode )
+		return dev;	/* Switch mode, we are done */
+
+	/*
+	 * Operating card as N separate NICs
+	 */
+
+	priv->nports = priv->bcomm->bc_nports;
+
+	for (i = 1; i < priv->nports; ++i)
+	{
+		struct net_device	*devN;
+		DGRS_PRIV	*privN;
+			/* Allocate new dev and priv structures */
+		devN = alloc_etherdev(sizeof(DGRS_PRIV));
+		ret = -ENOMEM;
+		if (!devN) 
+			goto fail;
+
+		/* Don't copy the network device structure! */
+
+		/* copy the priv structure of dev[0] */
+		privN = (DGRS_PRIV *)devN->priv;
+		*privN = *priv;
+
+			/* ... and zero out VM areas */
+		privN->vmem = NULL;
+		privN->vplxdma = NULL;
+			/* ... and zero out IRQ */
+		devN->irq = 0;
+			/* ... and base MAC address off address of 1st port */
+		devN->dev_addr[5] += i;
+
+		ret = dgrs_initclone(devN);
+		if (ret)
+			goto fail;
+
+		SET_MODULE_OWNER(devN);
+		SET_NETDEV_DEV(dev, pdev);
+
+		ret = register_netdev(devN);
+		if (ret) {
+			free_netdev(devN);
+			goto fail;
+		}
+		privN->chan = i+1;
+		priv->devtbl[i] = devN;
+	}
+	return dev;
+
+ fail:	
+	while (i >= 0) {
+		struct net_device *d = priv->devtbl[i--];
+		unregister_netdev(d);
+		free_netdev(d);
+	}
+
+ err2:
+	free_irq(dev->irq, dev);
+ err1:
+	free_netdev(dev);
+ err0:
+	return ERR_PTR(ret);
+}
+
+static void __devexit dgrs_remove(struct net_device *dev)
+{
+	DGRS_PRIV *priv = dev->priv;
+	int i;
+
+	unregister_netdev(dev);
+
+	for (i = 1; i < priv->nports; ++i) {
+		struct net_device *d = priv->devtbl[i];
+		if (d) {
+			unregister_netdev(d);
+			free_netdev(d);
+		}
+	}
+
+	proc_reset(priv->devtbl[0], 1);
+
+	if (priv->vmem)
+		iounmap(priv->vmem);
+	if (priv->vplxdma)
+		iounmap((uchar *) priv->vplxdma);
+
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+
+	for (i = 1; i < priv->nports; ++i) {
+		if (priv->devtbl[i])
+			unregister_netdev(priv->devtbl[i]);
+	}
+}
+
+#ifdef CONFIG_PCI
+static int __init dgrs_pci_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	int err;
+	uint	io;
+	uint	mem;
+	uint	irq;
+	uint	plxreg;
+	uint	plxdma;
+
+	/*
+	 * Get and check the bus-master and latency values.
+	 * Some PCI BIOSes fail to set the master-enable bit,
+	 * and the latency timer must be set to the maximum
+	 * value to avoid data corruption that occurs when the
+	 * timer expires during a transfer.  Yes, it's a bug.
+	 */
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	err = pci_request_regions(pdev, "RightSwitch");
+	if (err)
+		return err;
+
+	pci_set_master(pdev);
+
+	plxreg = pci_resource_start (pdev, 0);
+	io = pci_resource_start (pdev, 1);
+	mem = pci_resource_start (pdev, 2);
+	pci_read_config_dword(pdev, 0x30, &plxdma);
+	irq = pdev->irq;
+	plxdma &= ~15;
+
+	/*
+	 * On some BIOSES, the PLX "expansion rom" (used for DMA)
+	 * address comes up as "0".  This is probably because
+	 * the BIOS doesn't see a valid 55 AA ROM signature at
+	 * the "ROM" start and zeroes the address.  To get
+	 * around this problem the SE-6 is configured to ask
+	 * for 4 MB of space for the dual port memory.  We then
+	 * must set its range back to 2 MB, and use the upper
+	 * half for DMA register access
+	 */
+	OUTL(io + PLX_SPACE0_RANGE, 0xFFE00000L);
+	if (plxdma == 0)
+		plxdma = mem + (2048L * 1024L);
+	pci_write_config_dword(pdev, 0x30, plxdma + 1);
+	pci_read_config_dword(pdev, 0x30, &plxdma);
+	plxdma &= ~15;
+
+	dev = dgrs_found_device(io, mem, irq, plxreg, plxdma, &pdev->dev);
+	if (IS_ERR(dev)) {
+		pci_release_regions(pdev);
+		return PTR_ERR(dev);
+	}
+
+	pci_set_drvdata(pdev, dev);
+	return 0;
+}
+
+static void __devexit dgrs_pci_remove(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	dgrs_remove(dev);
+	pci_release_regions(pdev);
+	free_netdev(dev);
+}
+
+static struct pci_driver dgrs_pci_driver = {
+	.name = "dgrs",
+	.id_table = dgrs_pci_tbl,
+	.probe = dgrs_pci_probe,
+	.remove = __devexit_p(dgrs_pci_remove),
+};
+#endif
+
+
+#ifdef CONFIG_EISA
+static int is2iv[8] __initdata = { 0, 3, 5, 7, 10, 11, 12, 15 };
+
+static int __init dgrs_eisa_probe (struct device *gendev)
+{
+	struct net_device *dev;
+	struct eisa_device *edev = to_eisa_device(gendev);
+	uint	io = edev->base_addr;
+	uint	mem;
+	uint	irq;
+	int 	rc = -ENODEV; /* Not EISA configured */
+
+	if (!request_region(io, 256, "RightSwitch")) {
+		printk(KERN_ERR "dgrs: eisa io 0x%x, which is busy.\n", io);
+		return -EBUSY;
+	}
+
+	if ( ! (inb(io+ES4H_EC) & ES4H_EC_ENABLE) ) 
+		goto err_out;
+
+	mem = (inb(io+ES4H_AS_31_24) << 24)
+		+ (inb(io+ES4H_AS_23_16) << 16);
+
+	irq = is2iv[ inb(io+ES4H_IS) & ES4H_IS_INTMASK ];
+
+	dev = dgrs_found_device(io, mem, irq, 0L, 0L, gendev);
+	if (IS_ERR(dev)) {
+		rc = PTR_ERR(dev);
+		goto err_out;
+	}
+
+	gendev->driver_data = dev;
+	return 0;
+ err_out:
+	release_region(io, 256);
+	return rc;
+}
+
+static int __devexit dgrs_eisa_remove(struct device *gendev)
+{
+	struct net_device *dev = gendev->driver_data;
+	
+	dgrs_remove(dev);
+
+	release_region(dev->base_addr, 256);
+		
+	free_netdev(dev);
+	return 0;
+}
+
+
+static struct eisa_driver dgrs_eisa_driver = {
+	.id_table = dgrs_eisa_tbl,
+	.driver = {
+		.name = "dgrs",
+		.probe = dgrs_eisa_probe,
+		.remove = __devexit_p(dgrs_eisa_remove),
+	}
+};
+#endif
+
+/*
+ *	Variables that can be overriden from module command line
+ */
+static int	debug = -1;
+static int	dma = -1;
+static int	hashexpire = -1;
+static int	spantree = -1;
+static int	ipaddr[4] = { -1 };
+static int	iptrap[4] = { -1 };
+static __u32	ipxnet = -1;
+static int	nicmode = -1;
+
+module_param(debug, int, 0);
+module_param(dma, int, 0);
+module_param(hashexpire, int, 0);
+module_param(spantree, int, 0);
+module_param_array(ipaddr, int, NULL, 0);
+module_param_array(iptrap, int, NULL, 0);
+module_param(ipxnet, int, 0);
+module_param(nicmode, int, 0);
+MODULE_PARM_DESC(debug, "Digi RightSwitch enable debugging (0-1)");
+MODULE_PARM_DESC(dma, "Digi RightSwitch enable BM DMA (0-1)");
+MODULE_PARM_DESC(nicmode, "Digi RightSwitch operating mode (1: switch, 2: multi-NIC)");
+
+static int __init dgrs_init_module (void)
+{
+	int	i;
+	int eisacount = 0, pcicount = 0;
+
+	/*
+	 *	Command line variable overrides
+	 *		debug=NNN
+	 *		dma=0/1
+	 *		spantree=0/1
+	 *		hashexpire=NNN
+	 *		ipaddr=A,B,C,D
+	 *		iptrap=A,B,C,D
+	 *		ipxnet=NNN
+	 *		nicmode=NNN
+	 */
+	if (debug >= 0)
+		dgrs_debug = debug;
+	if (dma >= 0)
+		dgrs_dma = dma;
+	if (nicmode >= 0)
+		dgrs_nicmode = nicmode;
+	if (hashexpire >= 0)
+		dgrs_hashexpire = hashexpire;
+	if (spantree >= 0)
+		dgrs_spantree = spantree;
+	if (ipaddr[0] != -1)
+		for (i = 0; i < 4; ++i)
+			dgrs_ipaddr[i] = ipaddr[i];
+	if (iptrap[0] != -1)
+		for (i = 0; i < 4; ++i)
+			dgrs_iptrap[i] = iptrap[i];
+	if (ipxnet != -1)
+		dgrs_ipxnet = htonl( ipxnet );
+
+	if (dgrs_debug)
+	{
+		printk(KERN_INFO "dgrs: SW=%s FW=Build %d %s\nFW Version=%s\n",
+		       version, dgrs_firmnum, dgrs_firmdate, dgrs_firmver);
+	}
+
+	/*
+	 *	Find and configure all the cards
+	 */
+#ifdef CONFIG_EISA
+	eisacount = eisa_driver_register(&dgrs_eisa_driver);
+	if (eisacount < 0)
+		return eisacount;
+#endif
+#ifdef CONFIG_PCI
+	pcicount = pci_register_driver(&dgrs_pci_driver);
+	if (pcicount)
+		return pcicount;
+#endif
+	return 0;
+}
+
+static void __exit dgrs_cleanup_module (void)
+{
+#ifdef CONFIG_EISA
+	eisa_driver_unregister (&dgrs_eisa_driver);
+#endif
+#ifdef CONFIG_PCI
+	pci_unregister_driver (&dgrs_pci_driver);
+#endif
+}
+
+module_init(dgrs_init_module);
+module_exit(dgrs_cleanup_module);