chelsio: Move the Chelsio drivers

Moves the drivers for the Chelsio chipsets into
drivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile
changes.

CC: Divy Le Ray <divy@chelsio.com>
CC: Dimitris Michailidis <dm@chelsio.com>
CC: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 files changed, 0 insertions, 7735 deletions

diff --git a/drivers/net/cxgb4vf/Makefile b/drivers/net/cxgb4vf/Makefile
deleted file mode 100644
index d72ee26cb4c7..000000000000
--- a/drivers/net/cxgb4vf/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Chelsio T4 SR-IOV Virtual Function Driver
-#
-
-obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf.o
-
-cxgb4vf-objs := cxgb4vf_main.o t4vf_hw.o sge.o
diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/cxgb4vf/adapter.h
deleted file mode 100644
index 594334d5c711..000000000000
--- a/drivers/net/cxgb4vf/adapter.h
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
- * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
- * driver for Linux.
- *
- * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file should not be included directly.  Include t4vf_common.h instead.
- */
-
-#ifndef __CXGB4VF_ADAPTER_H__
-#define __CXGB4VF_ADAPTER_H__
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/skbuff.h>
-#include <linux/if_ether.h>
-#include <linux/netdevice.h>
-
-#include "../cxgb4/t4_hw.h"
-
-/*
- * Constants of the implementation.
- */
-enum {
-	MAX_NPORTS	= 1,		/* max # of "ports" */
-	MAX_PORT_QSETS	= 8,		/* max # of Queue Sets / "port" */
-	MAX_ETH_QSETS	= MAX_NPORTS*MAX_PORT_QSETS,
-
-	/*
-	 * MSI-X interrupt index usage.
-	 */
-	MSIX_FW		= 0,		/* MSI-X index for firmware Q */
-	MSIX_IQFLINT	= 1,		/* MSI-X index base for Ingress Qs */
-	MSIX_EXTRAS	= 1,
-	MSIX_ENTRIES	= MAX_ETH_QSETS + MSIX_EXTRAS,
-
-	/*
-	 * The maximum number of Ingress and Egress Queues is determined by
-	 * the maximum number of "Queue Sets" which we support plus any
-	 * ancillary queues.  Each "Queue Set" requires one Ingress Queue
-	 * for RX Packet Ingress Event notifications and two Egress Queues for
-	 * a Free List and an Ethernet TX list.
-	 */
-	INGQ_EXTRAS	= 2,		/* firmware event queue and */
-					/*   forwarded interrupts */
-	MAX_INGQ	= MAX_ETH_QSETS+INGQ_EXTRAS,
-	MAX_EGRQ	= MAX_ETH_QSETS*2,
-};
-
-/*
- * Forward structure definition references.
- */
-struct adapter;
-struct sge_eth_rxq;
-struct sge_rspq;
-
-/*
- * Per-"port" information.  This is really per-Virtual Interface information
- * but the use of the "port" nomanclature makes it easier to go back and forth
- * between the PF and VF drivers ...
- */
-struct port_info {
-	struct adapter *adapter;	/* our adapter */
-	u16 viid;			/* virtual interface ID */
-	s16 xact_addr_filt;		/* index of our MAC address filter */
-	u16 rss_size;			/* size of VI's RSS table slice */
-	u8 pidx;			/* index into adapter port[] */
-	u8 port_id;			/* physical port ID */
-	u8 nqsets;			/* # of "Queue Sets" */
-	u8 first_qset;			/* index of first "Queue Set" */
-	struct link_config link_cfg;	/* physical port configuration */
-};
-
-/*
- * Scatter Gather Engine resources for the "adapter".  Our ingress and egress
- * queues are organized into "Queue Sets" with one ingress and one egress
- * queue per Queue Set.  These Queue Sets are aportionable between the "ports"
- * (Virtual Interfaces).  One extra ingress queue is used to receive
- * asynchronous messages from the firmware.  Note that the "Queue IDs" that we
- * use here are really "Relative Queue IDs" which are returned as part of the
- * firmware command to allocate queues.  These queue IDs are relative to the
- * absolute Queue ID base of the section of the Queue ID space allocated to
- * the PF/VF.
- */
-
-/*
- * SGE free-list queue state.
- */
-struct rx_sw_desc;
-struct sge_fl {
-	unsigned int avail;		/* # of available RX buffers */
-	unsigned int pend_cred;		/* new buffers since last FL DB ring */
-	unsigned int cidx;		/* consumer index */
-	unsigned int pidx;		/* producer index */
-	unsigned long alloc_failed;	/* # of buffer allocation failures */
-	unsigned long large_alloc_failed;
-	unsigned long starving;		/* # of times FL was found starving */
-
-	/*
-	 * Write-once/infrequently fields.
-	 * -------------------------------
-	 */
-
-	unsigned int cntxt_id;		/* SGE relative QID for the free list */
-	unsigned int abs_id;		/* SGE absolute QID for the free list */
-	unsigned int size;		/* capacity of free list */
-	struct rx_sw_desc *sdesc;	/* address of SW RX descriptor ring */
-	__be64 *desc;			/* address of HW RX descriptor ring */
-	dma_addr_t addr;		/* PCI bus address of hardware ring */
-};
-
-/*
- * An ingress packet gather list.
- */
-struct pkt_gl {
-	skb_frag_t frags[MAX_SKB_FRAGS];
-	void *va;			/* virtual address of first byte */
-	unsigned int nfrags;		/* # of fragments */
-	unsigned int tot_len;		/* total length of fragments */
-};
-
-typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *,
-			      const struct pkt_gl *);
-
-/*
- * State for an SGE Response Queue.
- */
-struct sge_rspq {
-	struct napi_struct napi;	/* NAPI scheduling control */
-	const __be64 *cur_desc;		/* current descriptor in queue */
-	unsigned int cidx;		/* consumer index */
-	u8 gen;				/* current generation bit */
-	u8 next_intr_params;		/* holdoff params for next interrupt */
-	int offset;			/* offset into current FL buffer */
-
-	unsigned int unhandled_irqs;	/* bogus interrupts */
-
-	/*
-	 * Write-once/infrequently fields.
-	 * -------------------------------
-	 */
-
-	u8 intr_params;			/* interrupt holdoff parameters */
-	u8 pktcnt_idx;			/* interrupt packet threshold */
-	u8 idx;				/* queue index within its group */
-	u16 cntxt_id;			/* SGE rel QID for the response Q */
-	u16 abs_id;			/* SGE abs QID for the response Q */
-	__be64 *desc;			/* address of hardware response ring */
-	dma_addr_t phys_addr;		/* PCI bus address of ring */
-	unsigned int iqe_len;		/* entry size */
-	unsigned int size;		/* capcity of response Q */
-	struct adapter *adapter;	/* our adapter */
-	struct net_device *netdev;	/* associated net device */
-	rspq_handler_t handler;		/* the handler for this response Q */
-};
-
-/*
- * Ethernet queue statistics
- */
-struct sge_eth_stats {
-	unsigned long pkts;		/* # of ethernet packets */
-	unsigned long lro_pkts;		/* # of LRO super packets */
-	unsigned long lro_merged;	/* # of wire packets merged by LRO */
-	unsigned long rx_cso;		/* # of Rx checksum offloads */
-	unsigned long vlan_ex;		/* # of Rx VLAN extractions */
-	unsigned long rx_drops;		/* # of packets dropped due to no mem */
-};
-
-/*
- * State for an Ethernet Receive Queue.
- */
-struct sge_eth_rxq {
-	struct sge_rspq rspq;		/* Response Queue */
-	struct sge_fl fl;		/* Free List */
-	struct sge_eth_stats stats;	/* receive statistics */
-};
-
-/*
- * SGE Transmit Queue state.  This contains all of the resources associated
- * with the hardware status of a TX Queue which is a circular ring of hardware
- * TX Descriptors.  For convenience, it also contains a pointer to a parallel
- * "Software Descriptor" array but we don't know anything about it here other
- * than its type name.
- */
-struct tx_desc {
-	/*
-	 * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the
-	 * hardware: Sizes, Producer and Consumer indices, etc.
-	 */
-	__be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)];
-};
-struct tx_sw_desc;
-struct sge_txq {
-	unsigned int in_use;		/* # of in-use TX descriptors */
-	unsigned int size;		/* # of descriptors */
-	unsigned int cidx;		/* SW consumer index */
-	unsigned int pidx;		/* producer index */
-	unsigned long stops;		/* # of times queue has been stopped */
-	unsigned long restarts;		/* # of queue restarts */
-
-	/*
-	 * Write-once/infrequently fields.
-	 * -------------------------------
-	 */
-
-	unsigned int cntxt_id;		/* SGE relative QID for the TX Q */
-	unsigned int abs_id;		/* SGE absolute QID for the TX Q */
-	struct tx_desc *desc;		/* address of HW TX descriptor ring */
-	struct tx_sw_desc *sdesc;	/* address of SW TX descriptor ring */
-	struct sge_qstat *stat;		/* queue status entry */
-	dma_addr_t phys_addr;		/* PCI bus address of hardware ring */
-};
-
-/*
- * State for an Ethernet Transmit Queue.
- */
-struct sge_eth_txq {
-	struct sge_txq q;		/* SGE TX Queue */
-	struct netdev_queue *txq;	/* associated netdev TX queue */
-	unsigned long tso;		/* # of TSO requests */
-	unsigned long tx_cso;		/* # of TX checksum offloads */
-	unsigned long vlan_ins;		/* # of TX VLAN insertions */
-	unsigned long mapping_err;	/* # of I/O MMU packet mapping errors */
-};
-
-/*
- * The complete set of Scatter/Gather Engine resources.
- */
-struct sge {
-	/*
-	 * Our "Queue Sets" ...
-	 */
-	struct sge_eth_txq ethtxq[MAX_ETH_QSETS];
-	struct sge_eth_rxq ethrxq[MAX_ETH_QSETS];
-
-	/*
-	 * Extra ingress queues for asynchronous firmware events and
-	 * forwarded interrupts (when in MSI mode).
-	 */
-	struct sge_rspq fw_evtq ____cacheline_aligned_in_smp;
-
-	struct sge_rspq intrq ____cacheline_aligned_in_smp;
-	spinlock_t intrq_lock;
-
-	/*
-	 * State for managing "starving Free Lists" -- Free Lists which have
-	 * fallen below a certain threshold of buffers available to the
-	 * hardware and attempts to refill them up to that threshold have
-	 * failed.  We have a regular "slow tick" timer process which will
-	 * make periodic attempts to refill these starving Free Lists ...
-	 */
-	DECLARE_BITMAP(starving_fl, MAX_EGRQ);
-	struct timer_list rx_timer;
-
-	/*
-	 * State for cleaning up completed TX descriptors.
-	 */
-	struct timer_list tx_timer;
-
-	/*
-	 * Write-once/infrequently fields.
-	 * -------------------------------
-	 */
-
-	u16 max_ethqsets;		/* # of available Ethernet queue sets */
-	u16 ethqsets;			/* # of active Ethernet queue sets */
-	u16 ethtxq_rover;		/* Tx queue to clean up next */
-	u16 timer_val[SGE_NTIMERS];	/* interrupt holdoff timer array */
-	u8 counter_val[SGE_NCOUNTERS];	/* interrupt RX threshold array */
-
-	/*
-	 * Reverse maps from Absolute Queue IDs to associated queue pointers.
-	 * The absolute Queue IDs are in a compact range which start at a
-	 * [potentially large] Base Queue ID.  We perform the reverse map by
-	 * first converting the Absolute Queue ID into a Relative Queue ID by
-	 * subtracting off the Base Queue ID and then use a Relative Queue ID
-	 * indexed table to get the pointer to the corresponding software
-	 * queue structure.
-	 */
-	unsigned int egr_base;
-	unsigned int ingr_base;
-	void *egr_map[MAX_EGRQ];
-	struct sge_rspq *ingr_map[MAX_INGQ];
-};
-
-/*
- * Utility macros to convert Absolute- to Relative-Queue indices and Egress-
- * and Ingress-Queues.  The EQ_MAP() and IQ_MAP() macros which provide
- * pointers to Ingress- and Egress-Queues can be used as both L- and R-values
- */
-#define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base))
-#define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base))
-
-#define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)])
-#define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)])
-
-/*
- * Macro to iterate across Queue Sets ("rxq" is a historic misnomer).
- */
-#define for_each_ethrxq(sge, iter) \
-	for (iter = 0; iter < (sge)->ethqsets; iter++)
-
-/*
- * Per-"adapter" (Virtual Function) information.
- */
-struct adapter {
-	/* PCI resources */
-	void __iomem *regs;
-	struct pci_dev *pdev;
-	struct device *pdev_dev;
-
-	/* "adapter" resources */
-	unsigned long registered_device_map;
-	unsigned long open_device_map;
-	unsigned long flags;
-	struct adapter_params params;
-
-	/* queue and interrupt resources */
-	struct {
-		unsigned short vec;
-		char desc[22];
-	} msix_info[MSIX_ENTRIES];
-	struct sge sge;
-
-	/* Linux network device resources */
-	struct net_device *port[MAX_NPORTS];
-	const char *name;
-	unsigned int msg_enable;
-
-	/* debugfs resources */
-	struct dentry *debugfs_root;
-
-	/* various locks */
-	spinlock_t stats_lock;
-};
-
-enum { /* adapter flags */
-	FULL_INIT_DONE     = (1UL << 0),
-	USING_MSI          = (1UL << 1),
-	USING_MSIX         = (1UL << 2),
-	QUEUES_BOUND       = (1UL << 3),
-};
-
-/*
- * The following register read/write routine definitions are required by
- * the common code.
- */
-
-/**
- * t4_read_reg - read a HW register
- * @adapter: the adapter
- * @reg_addr: the register address
- *
- * Returns the 32-bit value of the given HW register.
- */
-static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr)
-{
-	return readl(adapter->regs + reg_addr);
-}
-
-/**
- * t4_write_reg - write a HW register
- * @adapter: the adapter
- * @reg_addr: the register address
- * @val: the value to write
- *
- * Write a 32-bit value into the given HW register.
- */
-static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
-{
-	writel(val, adapter->regs + reg_addr);
-}
-
-#ifndef readq
-static inline u64 readq(const volatile void __iomem *addr)
-{
-	return readl(addr) + ((u64)readl(addr + 4) << 32);
-}
-
-static inline void writeq(u64 val, volatile void __iomem *addr)
-{
-	writel(val, addr);
-	writel(val >> 32, addr + 4);
-}
-#endif
-
-/**
- * t4_read_reg64 - read a 64-bit HW register
- * @adapter: the adapter
- * @reg_addr: the register address
- *
- * Returns the 64-bit value of the given HW register.
- */
-static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr)
-{
-	return readq(adapter->regs + reg_addr);
-}
-
-/**
- * t4_write_reg64 - write a 64-bit HW register
- * @adapter: the adapter
- * @reg_addr: the register address
- * @val: the value to write
- *
- * Write a 64-bit value into the given HW register.
- */
-static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr,
-				  u64 val)
-{
-	writeq(val, adapter->regs + reg_addr);
-}
-
-/**
- * port_name - return the string name of a port
- * @adapter: the adapter
- * @pidx: the port index
- *
- * Return the string name of the selected port.
- */
-static inline const char *port_name(struct adapter *adapter, int pidx)
-{
-	return adapter->port[pidx]->name;
-}
-
-/**
- * t4_os_set_hw_addr - store a port's MAC address in SW
- * @adapter: the adapter
- * @pidx: the port index
- * @hw_addr: the Ethernet address
- *
- * Store the Ethernet address of the given port in SW.  Called by the common
- * code when it retrieves a port's Ethernet address from EEPROM.
- */
-static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx,
-				     u8 hw_addr[])
-{
-	memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN);
-	memcpy(adapter->port[pidx]->perm_addr, hw_addr, ETH_ALEN);
-}
-
-/**
- * netdev2pinfo - return the port_info structure associated with a net_device
- * @dev: the netdev
- *
- * Return the struct port_info associated with a net_device
- */
-static inline struct port_info *netdev2pinfo(const struct net_device *dev)
-{
-	return netdev_priv(dev);
-}
-
-/**
- * adap2pinfo - return the port_info of a port
- * @adap: the adapter
- * @pidx: the port index
- *
- * Return the port_info structure for the adapter.
- */
-static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx)
-{
-	return netdev_priv(adapter->port[pidx]);
-}
-
-/**
- * netdev2adap - return the adapter structure associated with a net_device
- * @dev: the netdev
- *
- * Return the struct adapter associated with a net_device
- */
-static inline struct adapter *netdev2adap(const struct net_device *dev)
-{
-	return netdev2pinfo(dev)->adapter;
-}
-
-/*
- * OS "Callback" function declarations.  These are functions that the OS code
- * is "contracted" to provide for the common code.
- */
-void t4vf_os_link_changed(struct adapter *, int, int);
-
-/*
- * SGE function prototype declarations.
- */
-int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool,
-		       struct net_device *, int,
-		       struct sge_fl *, rspq_handler_t);
-int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *,
-			   struct net_device *, struct netdev_queue *,
-			   unsigned int);
-void t4vf_free_sge_resources(struct adapter *);
-
-int t4vf_eth_xmit(struct sk_buff *, struct net_device *);
-int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *,
-		       const struct pkt_gl *);
-
-irq_handler_t t4vf_intr_handler(struct adapter *);
-irqreturn_t t4vf_sge_intr_msix(int, void *);
-
-int t4vf_sge_init(struct adapter *);
-void t4vf_sge_start(struct adapter *);
-void t4vf_sge_stop(struct adapter *);
-
-#endif /* __CXGB4VF_ADAPTER_H__ */
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
deleted file mode 100644
index ec799139dfe2..000000000000
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ /dev/null
@@ -1,2947 +0,0 @@
-/*
- * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
- * driver for Linux.
- *
- * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/debugfs.h>
-#include <linux/ethtool.h>
-
-#include "t4vf_common.h"
-#include "t4vf_defs.h"
-
-#include "../cxgb4/t4_regs.h"
-#include "../cxgb4/t4_msg.h"
-
-/*
- * Generic information about the driver.
- */
-#define DRV_VERSION "1.0.0"
-#define DRV_DESC "Chelsio T4 Virtual Function (VF) Network Driver"
-
-/*
- * Module Parameters.
- * ==================
- */
-
-/*
- * Default ethtool "message level" for adapters.
- */
-#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
-			 NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
-			 NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
-
-static int dflt_msg_enable = DFLT_MSG_ENABLE;
-
-module_param(dflt_msg_enable, int, 0644);
-MODULE_PARM_DESC(dflt_msg_enable,
-		 "default adapter ethtool message level bitmap");
-
-/*
- * The driver uses the best interrupt scheme available on a platform in the
- * order MSI-X then MSI.  This parameter determines which of these schemes the
- * driver may consider as follows:
- *
- *     msi = 2: choose from among MSI-X and MSI
- *     msi = 1: only consider MSI interrupts
- *
- * Note that unlike the Physical Function driver, this Virtual Function driver
- * does _not_ support legacy INTx interrupts (this limitation is mandated by
- * the PCI-E SR-IOV standard).
- */
-#define MSI_MSIX	2
-#define MSI_MSI		1
-#define MSI_DEFAULT	MSI_MSIX
-
-static int msi = MSI_DEFAULT;
-
-module_param(msi, int, 0644);
-MODULE_PARM_DESC(msi, "whether to use MSI-X or MSI");
-
-/*
- * Fundamental constants.
- * ======================
- */
-
-enum {
-	MAX_TXQ_ENTRIES		= 16384,
-	MAX_RSPQ_ENTRIES	= 16384,
-	MAX_RX_BUFFERS		= 16384,
-
-	MIN_TXQ_ENTRIES		= 32,
-	MIN_RSPQ_ENTRIES	= 128,
-	MIN_FL_ENTRIES		= 16,
-
-	/*
-	 * For purposes of manipulating the Free List size we need to
-	 * recognize that Free Lists are actually Egress Queues (the host
-	 * produces free buffers which the hardware consumes), Egress Queues
-	 * indices are all in units of Egress Context Units bytes, and free
-	 * list entries are 64-bit PCI DMA addresses.  And since the state of
-	 * the Producer Index == the Consumer Index implies an EMPTY list, we
-	 * always have at least one Egress Unit's worth of Free List entries
-	 * unused.  See sge.c for more details ...
-	 */
-	EQ_UNIT = SGE_EQ_IDXSIZE,
-	FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
-	MIN_FL_RESID = FL_PER_EQ_UNIT,
-};
-
-/*
- * Global driver state.
- * ====================
- */
-
-static struct dentry *cxgb4vf_debugfs_root;
-
-/*
- * OS "Callback" functions.
- * ========================
- */
-
-/*
- * The link status has changed on the indicated "port" (Virtual Interface).
- */
-void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok)
-{
-	struct net_device *dev = adapter->port[pidx];
-
-	/*
-	 * If the port is disabled or the current recorded "link up"
-	 * status matches the new status, just return.
-	 */
-	if (!netif_running(dev) || link_ok == netif_carrier_ok(dev))
-		return;
-
-	/*
-	 * Tell the OS that the link status has changed and print a short
-	 * informative message on the console about the event.
-	 */
-	if (link_ok) {
-		const char *s;
-		const char *fc;
-		const struct port_info *pi = netdev_priv(dev);
-
-		netif_carrier_on(dev);
-
-		switch (pi->link_cfg.speed) {
-		case SPEED_10000:
-			s = "10Gbps";
-			break;
-
-		case SPEED_1000:
-			s = "1000Mbps";
-			break;
-
-		case SPEED_100:
-			s = "100Mbps";
-			break;
-
-		default:
-			s = "unknown";
-			break;
-		}
-
-		switch (pi->link_cfg.fc) {
-		case PAUSE_RX:
-			fc = "RX";
-			break;
-
-		case PAUSE_TX:
-			fc = "TX";
-			break;
-
-		case PAUSE_RX|PAUSE_TX:
-			fc = "RX/TX";
-			break;
-
-		default:
-			fc = "no";
-			break;
-		}
-
-		printk(KERN_INFO "%s: link up, %s, full-duplex, %s PAUSE\n",
-		       dev->name, s, fc);
-	} else {
-		netif_carrier_off(dev);
-		printk(KERN_INFO "%s: link down\n", dev->name);
-	}
-}
-
-/*
- * Net device operations.
- * ======================
- */
-
-
-
-
-/*
- * Perform the MAC and PHY actions needed to enable a "port" (Virtual
- * Interface).
- */
-static int link_start(struct net_device *dev)
-{
-	int ret;
-	struct port_info *pi = netdev_priv(dev);
-
-	/*
-	 * We do not set address filters and promiscuity here, the stack does
-	 * that step explicitly. Enable vlan accel.
-	 */
-	ret = t4vf_set_rxmode(pi->adapter, pi->viid, dev->mtu, -1, -1, -1, 1,
-			      true);
-	if (ret == 0) {
-		ret = t4vf_change_mac(pi->adapter, pi->viid,
-				      pi->xact_addr_filt, dev->dev_addr, true);
-		if (ret >= 0) {
-			pi->xact_addr_filt = ret;
-			ret = 0;
-		}
-	}
-
-	/*
-	 * We don't need to actually "start the link" itself since the
-	 * firmware will do that for us when the first Virtual Interface
-	 * is enabled on a port.
-	 */
-	if (ret == 0)
-		ret = t4vf_enable_vi(pi->adapter, pi->viid, true, true);
-	return ret;
-}
-
-/*
- * Name the MSI-X interrupts.
- */
-static void name_msix_vecs(struct adapter *adapter)
-{
-	int namelen = sizeof(adapter->msix_info[0].desc) - 1;
-	int pidx;
-
-	/*
-	 * Firmware events.
-	 */
-	snprintf(adapter->msix_info[MSIX_FW].desc, namelen,
-		 "%s-FWeventq", adapter->name);
-	adapter->msix_info[MSIX_FW].desc[namelen] = 0;
-
-	/*
-	 * Ethernet queues.
-	 */
-	for_each_port(adapter, pidx) {
-		struct net_device *dev = adapter->port[pidx];
-		const struct port_info *pi = netdev_priv(dev);
-		int qs, msi;
-
-		for (qs = 0, msi = MSIX_IQFLINT; qs < pi->nqsets; qs++, msi++) {
-			snprintf(adapter->msix_info[msi].desc, namelen,
-				 "%s-%d", dev->name, qs);
-			adapter->msix_info[msi].desc[namelen] = 0;
-		}
-	}
-}
-
-/*
- * Request all of our MSI-X resources.
- */
-static int request_msix_queue_irqs(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-	int rxq, msi, err;
-
-	/*
-	 * Firmware events.
-	 */
-	err = request_irq(adapter->msix_info[MSIX_FW].vec, t4vf_sge_intr_msix,
-			  0, adapter->msix_info[MSIX_FW].desc, &s->fw_evtq);
-	if (err)
-		return err;
-
-	/*
-	 * Ethernet queues.
-	 */
-	msi = MSIX_IQFLINT;
-	for_each_ethrxq(s, rxq) {
-		err = request_irq(adapter->msix_info[msi].vec,
-				  t4vf_sge_intr_msix, 0,
-				  adapter->msix_info[msi].desc,
-				  &s->ethrxq[rxq].rspq);
-		if (err)
-			goto err_free_irqs;
-		msi++;
-	}
-	return 0;
-
-err_free_irqs:
-	while (--rxq >= 0)
-		free_irq(adapter->msix_info[--msi].vec, &s->ethrxq[rxq].rspq);
-	free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq);
-	return err;
-}
-
-/*
- * Free our MSI-X resources.
- */
-static void free_msix_queue_irqs(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-	int rxq, msi;
-
-	free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq);
-	msi = MSIX_IQFLINT;
-	for_each_ethrxq(s, rxq)
-		free_irq(adapter->msix_info[msi++].vec,
-			 &s->ethrxq[rxq].rspq);
-}
-
-/*
- * Turn on NAPI and start up interrupts on a response queue.
- */
-static void qenable(struct sge_rspq *rspq)
-{
-	napi_enable(&rspq->napi);
-
-	/*
-	 * 0-increment the Going To Sleep register to start the timer and
-	 * enable interrupts.
-	 */
-	t4_write_reg(rspq->adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS,
-		     CIDXINC(0) |
-		     SEINTARM(rspq->intr_params) |
-		     INGRESSQID(rspq->cntxt_id));
-}
-
-/*
- * Enable NAPI scheduling and interrupt generation for all Receive Queues.
- */
-static void enable_rx(struct adapter *adapter)
-{
-	int rxq;
-	struct sge *s = &adapter->sge;
-
-	for_each_ethrxq(s, rxq)
-		qenable(&s->ethrxq[rxq].rspq);
-	qenable(&s->fw_evtq);
-
-	/*
-	 * The interrupt queue doesn't use NAPI so we do the 0-increment of
-	 * its Going To Sleep register here to get it started.
-	 */
-	if (adapter->flags & USING_MSI)
-		t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS,
-			     CIDXINC(0) |
-			     SEINTARM(s->intrq.intr_params) |
-			     INGRESSQID(s->intrq.cntxt_id));
-
-}
-
-/*
- * Wait until all NAPI handlers are descheduled.
- */
-static void quiesce_rx(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-	int rxq;
-
-	for_each_ethrxq(s, rxq)
-		napi_disable(&s->ethrxq[rxq].rspq.napi);
-	napi_disable(&s->fw_evtq.napi);
-}
-
-/*
- * Response queue handler for the firmware event queue.
- */
-static int fwevtq_handler(struct sge_rspq *rspq, const __be64 *rsp,
-			  const struct pkt_gl *gl)
-{
-	/*
-	 * Extract response opcode and get pointer to CPL message body.
-	 */
-	struct adapter *adapter = rspq->adapter;
-	u8 opcode = ((const struct rss_header *)rsp)->opcode;
-	void *cpl = (void *)(rsp + 1);
-
-	switch (opcode) {
-	case CPL_FW6_MSG: {
-		/*
-		 * We've received an asynchronous message from the firmware.
-		 */
-		const struct cpl_fw6_msg *fw_msg = cpl;
-		if (fw_msg->type == FW6_TYPE_CMD_RPL)
-			t4vf_handle_fw_rpl(adapter, fw_msg->data);
-		break;
-	}
-
-	case CPL_SGE_EGR_UPDATE: {
-		/*
-		 * We've received an Egress Queue Status Update message.  We
-		 * get these, if the SGE is configured to send these when the
-		 * firmware passes certain points in processing our TX
-		 * Ethernet Queue or if we make an explicit request for one.
-		 * We use these updates to determine when we may need to
-		 * restart a TX Ethernet Queue which was stopped for lack of
-		 * free TX Queue Descriptors ...
-		 */
-		const struct cpl_sge_egr_update *p = (void *)cpl;
-		unsigned int qid = EGR_QID(be32_to_cpu(p->opcode_qid));
-		struct sge *s = &adapter->sge;
-		struct sge_txq *tq;
-		struct sge_eth_txq *txq;
-		unsigned int eq_idx;
-
-		/*
-		 * Perform sanity checking on the Queue ID to make sure it
-		 * really refers to one of our TX Ethernet Egress Queues which
-		 * is active and matches the queue's ID.  None of these error
-		 * conditions should ever happen so we may want to either make
-		 * them fatal and/or conditionalized under DEBUG.
-		 */
-		eq_idx = EQ_IDX(s, qid);
-		if (unlikely(eq_idx >= MAX_EGRQ)) {
-			dev_err(adapter->pdev_dev,
-				"Egress Update QID %d out of range\n", qid);
-			break;
-		}
-		tq = s->egr_map[eq_idx];
-		if (unlikely(tq == NULL)) {
-			dev_err(adapter->pdev_dev,
-				"Egress Update QID %d TXQ=NULL\n", qid);
-			break;
-		}
-		txq = container_of(tq, struct sge_eth_txq, q);
-		if (unlikely(tq->abs_id != qid)) {
-			dev_err(adapter->pdev_dev,
-				"Egress Update QID %d refers to TXQ %d\n",
-				qid, tq->abs_id);
-			break;
-		}
-
-		/*
-		 * Restart a stopped TX Queue which has less than half of its
-		 * TX ring in use ...
-		 */
-		txq->q.restarts++;
-		netif_tx_wake_queue(txq->txq);
-		break;
-	}
-
-	default:
-		dev_err(adapter->pdev_dev,
-			"unexpected CPL %#x on FW event queue\n", opcode);
-	}
-
-	return 0;
-}
-
-/*
- * Allocate SGE TX/RX response queues.  Determine how many sets of SGE queues
- * to use and initializes them.  We support multiple "Queue Sets" per port if
- * we have MSI-X, otherwise just one queue set per port.
- */
-static int setup_sge_queues(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-	int err, pidx, msix;
-
-	/*
-	 * Clear "Queue Set" Free List Starving and TX Queue Mapping Error
-	 * state.
-	 */
-	bitmap_zero(s->starving_fl, MAX_EGRQ);
-
-	/*
-	 * If we're using MSI interrupt mode we need to set up a "forwarded
-	 * interrupt" queue which we'll set up with our MSI vector.  The rest
-	 * of the ingress queues will be set up to forward their interrupts to
-	 * this queue ...  This must be first since t4vf_sge_alloc_rxq() uses
-	 * the intrq's queue ID as the interrupt forwarding queue for the
-	 * subsequent calls ...
-	 */
-	if (adapter->flags & USING_MSI) {
-		err = t4vf_sge_alloc_rxq(adapter, &s->intrq, false,
-					 adapter->port[0], 0, NULL, NULL);
-		if (err)
-			goto err_free_queues;
-	}
-
-	/*
-	 * Allocate our ingress queue for asynchronous firmware messages.
-	 */
-	err = t4vf_sge_alloc_rxq(adapter, &s->fw_evtq, true, adapter->port[0],
-				 MSIX_FW, NULL, fwevtq_handler);
-	if (err)
-		goto err_free_queues;
-
-	/*
-	 * Allocate each "port"'s initial Queue Sets.  These can be changed
-	 * later on ... up to the point where any interface on the adapter is
-	 * brought up at which point lots of things get nailed down
-	 * permanently ...
-	 */
-	msix = MSIX_IQFLINT;
-	for_each_port(adapter, pidx) {
-		struct net_device *dev = adapter->port[pidx];
-		struct port_info *pi = netdev_priv(dev);
-		struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset];
-		struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset];
-		int qs;
-
-		for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) {
-			err = t4vf_sge_alloc_rxq(adapter, &rxq->rspq, false,
-						 dev, msix++,
-						 &rxq->fl, t4vf_ethrx_handler);
-			if (err)
-				goto err_free_queues;
-
-			err = t4vf_sge_alloc_eth_txq(adapter, txq, dev,
-					     netdev_get_tx_queue(dev, qs),
-					     s->fw_evtq.cntxt_id);
-			if (err)
-				goto err_free_queues;
-
-			rxq->rspq.idx = qs;
-			memset(&rxq->stats, 0, sizeof(rxq->stats));
-		}
-	}
-
-	/*
-	 * Create the reverse mappings for the queues.
-	 */
-	s->egr_base = s->ethtxq[0].q.abs_id - s->ethtxq[0].q.cntxt_id;
-	s->ingr_base = s->ethrxq[0].rspq.abs_id - s->ethrxq[0].rspq.cntxt_id;
-	IQ_MAP(s, s->fw_evtq.abs_id) = &s->fw_evtq;
-	for_each_port(adapter, pidx) {
-		struct net_device *dev = adapter->port[pidx];
-		struct port_info *pi = netdev_priv(dev);
-		struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset];
-		struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset];
-		int qs;
-
-		for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) {
-			IQ_MAP(s, rxq->rspq.abs_id) = &rxq->rspq;
-			EQ_MAP(s, txq->q.abs_id) = &txq->q;
-
-			/*
-			 * The FW_IQ_CMD doesn't return the Absolute Queue IDs
-			 * for Free Lists but since all of the Egress Queues
-			 * (including Free Lists) have Relative Queue IDs
-			 * which are computed as Absolute - Base Queue ID, we
-			 * can synthesize the Absolute Queue IDs for the Free
-			 * Lists.  This is useful for debugging purposes when
-			 * we want to dump Queue Contexts via the PF Driver.
-			 */
-			rxq->fl.abs_id = rxq->fl.cntxt_id + s->egr_base;
-			EQ_MAP(s, rxq->fl.abs_id) = &rxq->fl;
-		}
-	}
-	return 0;
-
-err_free_queues:
-	t4vf_free_sge_resources(adapter);
-	return err;
-}
-
-/*
- * Set up Receive Side Scaling (RSS) to distribute packets to multiple receive
- * queues.  We configure the RSS CPU lookup table to distribute to the number
- * of HW receive queues, and the response queue lookup table to narrow that
- * down to the response queues actually configured for each "port" (Virtual
- * Interface).  We always configure the RSS mapping for all ports since the
- * mapping table has plenty of entries.
- */
-static int setup_rss(struct adapter *adapter)
-{
-	int pidx;
-
-	for_each_port(adapter, pidx) {
-		struct port_info *pi = adap2pinfo(adapter, pidx);
-		struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset];
-		u16 rss[MAX_PORT_QSETS];
-		int qs, err;
-
-		for (qs = 0; qs < pi->nqsets; qs++)
-			rss[qs] = rxq[qs].rspq.abs_id;
-
-		err = t4vf_config_rss_range(adapter, pi->viid,
-					    0, pi->rss_size, rss, pi->nqsets);
-		if (err)
-			return err;
-
-		/*
-		 * Perform Global RSS Mode-specific initialization.
-		 */
-		switch (adapter->params.rss.mode) {
-		case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL:
-			/*
-			 * If Tunnel All Lookup isn't specified in the global
-			 * RSS Configuration, then we need to specify a
-			 * default Ingress Queue for any ingress packets which
-			 * aren't hashed.  We'll use our first ingress queue
-			 * ...
-			 */
-			if (!adapter->params.rss.u.basicvirtual.tnlalllookup) {
-				union rss_vi_config config;
-				err = t4vf_read_rss_vi_config(adapter,
-							      pi->viid,
-							      &config);
-				if (err)
-					return err;
-				config.basicvirtual.defaultq =
-					rxq[0].rspq.abs_id;
-				err = t4vf_write_rss_vi_config(adapter,
-							       pi->viid,
-							       &config);
-				if (err)
-					return err;
-			}
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Bring the adapter up.  Called whenever we go from no "ports" open to having
- * one open.  This function performs the actions necessary to make an adapter
- * operational, such as completing the initialization of HW modules, and
- * enabling interrupts.  Must be called with the rtnl lock held.  (Note that
- * this is called "cxgb_up" in the PF Driver.)
- */
-static int adapter_up(struct adapter *adapter)
-{
-	int err;
-
-	/*
-	 * If this is the first time we've been called, perform basic
-	 * adapter setup.  Once we've done this, many of our adapter
-	 * parameters can no longer be changed ...
-	 */
-	if ((adapter->flags & FULL_INIT_DONE) == 0) {
-		err = setup_sge_queues(adapter);
-		if (err)
-			return err;
-		err = setup_rss(adapter);
-		if (err) {
-			t4vf_free_sge_resources(adapter);
-			return err;
-		}
-
-		if (adapter->flags & USING_MSIX)
-			name_msix_vecs(adapter);
-		adapter->flags |= FULL_INIT_DONE;
-	}
-
-	/*
-	 * Acquire our interrupt resources.  We only support MSI-X and MSI.
-	 */
-	BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0);
-	if (adapter->flags & USING_MSIX)
-		err = request_msix_queue_irqs(adapter);
-	else
-		err = request_irq(adapter->pdev->irq,
-				  t4vf_intr_handler(adapter), 0,
-				  adapter->name, adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "request_irq failed, err %d\n",
-			err);
-		return err;
-	}
-
-	/*
-	 * Enable NAPI ingress processing and return success.
-	 */
-	enable_rx(adapter);
-	t4vf_sge_start(adapter);
-	return 0;
-}
-
-/*
- * Bring the adapter down.  Called whenever the last "port" (Virtual
- * Interface) closed.  (Note that this routine is called "cxgb_down" in the PF
- * Driver.)
- */
-static void adapter_down(struct adapter *adapter)
-{
-	/*
-	 * Free interrupt resources.
-	 */
-	if (adapter->flags & USING_MSIX)
-		free_msix_queue_irqs(adapter);
-	else
-		free_irq(adapter->pdev->irq, adapter);
-
-	/*
-	 * Wait for NAPI handlers to finish.
-	 */
-	quiesce_rx(adapter);
-}
-
-/*
- * Start up a net device.
- */
-static int cxgb4vf_open(struct net_device *dev)
-{
-	int err;
-	struct port_info *pi = netdev_priv(dev);
-	struct adapter *adapter = pi->adapter;
-
-	/*
-	 * If this is the first interface that we're opening on the "adapter",
-	 * bring the "adapter" up now.
-	 */
-	if (adapter->open_device_map == 0) {
-		err = adapter_up(adapter);
-		if (err)
-			return err;
-	}
-
-	/*
-	 * Note that this interface is up and start everything up ...
-	 */
-	netif_set_real_num_tx_queues(dev, pi->nqsets);
-	err = netif_set_real_num_rx_queues(dev, pi->nqsets);
-	if (err)
-		goto err_unwind;
-	err = link_start(dev);
-	if (err)
-		goto err_unwind;
-
-	netif_tx_start_all_queues(dev);
-	set_bit(pi->port_id, &adapter->open_device_map);
-	return 0;
-
-err_unwind:
-	if (adapter->open_device_map == 0)
-		adapter_down(adapter);
-	return err;
-}
-
-/*
- * Shut down a net device.  This routine is called "cxgb_close" in the PF
- * Driver ...
- */
-static int cxgb4vf_stop(struct net_device *dev)
-{
-	struct port_info *pi = netdev_priv(dev);
-	struct adapter *adapter = pi->adapter;
-
-	netif_tx_stop_all_queues(dev);
-	netif_carrier_off(dev);
-	t4vf_enable_vi(adapter, pi->viid, false, false);
-	pi->link_cfg.link_ok = 0;
-
-	clear_bit(pi->port_id, &adapter->open_device_map);
-	if (adapter->open_device_map == 0)
-		adapter_down(adapter);
-	return 0;
-}
-
-/*
- * Translate our basic statistics into the standard "ifconfig" statistics.
- */
-static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev)
-{
-	struct t4vf_port_stats stats;
-	struct port_info *pi = netdev2pinfo(dev);
-	struct adapter *adapter = pi->adapter;
-	struct net_device_stats *ns = &dev->stats;
-	int err;
-
-	spin_lock(&adapter->stats_lock);
-	err = t4vf_get_port_stats(adapter, pi->pidx, &stats);
-	spin_unlock(&adapter->stats_lock);
-
-	memset(ns, 0, sizeof(*ns));
-	if (err)
-		return ns;
-
-	ns->tx_bytes = (stats.tx_bcast_bytes + stats.tx_mcast_bytes +
-			stats.tx_ucast_bytes + stats.tx_offload_bytes);
-	ns->tx_packets = (stats.tx_bcast_frames + stats.tx_mcast_frames +
-			  stats.tx_ucast_frames + stats.tx_offload_frames);
-	ns->rx_bytes = (stats.rx_bcast_bytes + stats.rx_mcast_bytes +
-			stats.rx_ucast_bytes);
-	ns->rx_packets = (stats.rx_bcast_frames + stats.rx_mcast_frames +
-			  stats.rx_ucast_frames);
-	ns->multicast = stats.rx_mcast_frames;
-	ns->tx_errors = stats.tx_drop_frames;
-	ns->rx_errors = stats.rx_err_frames;
-
-	return ns;
-}
-
-/*
- * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting
- * at a specified offset within the list, into an array of addrss pointers and
- * return the number collected.
- */
-static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev,
-							const u8 **addr,
-							unsigned int offset,
-							unsigned int maxaddrs)
-{
-	unsigned int index = 0;
-	unsigned int naddr = 0;
-	const struct netdev_hw_addr *ha;
-
-	for_each_dev_addr(dev, ha)
-		if (index++ >= offset) {
-			addr[naddr++] = ha->addr;
-			if (naddr >= maxaddrs)
-				break;
-		}
-	return naddr;
-}
-
-/*
- * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting
- * at a specified offset within the list, into an array of addrss pointers and
- * return the number collected.
- */
-static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev,
-							const u8 **addr,
-							unsigned int offset,
-							unsigned int maxaddrs)
-{
-	unsigned int index = 0;
-	unsigned int naddr = 0;
-	const struct netdev_hw_addr *ha;
-
-	netdev_for_each_mc_addr(ha, dev)
-		if (index++ >= offset) {
-			addr[naddr++] = ha->addr;
-			if (naddr >= maxaddrs)
-				break;
-		}
-	return naddr;
-}
-
-/*
- * Configure the exact and hash address filters to handle a port's multicast
- * and secondary unicast MAC addresses.
- */
-static int set_addr_filters(const struct net_device *dev, bool sleep)
-{
-	u64 mhash = 0;
-	u64 uhash = 0;
-	bool free = true;
-	unsigned int offset, naddr;
-	const u8 *addr[7];
-	int ret;
-	const struct port_info *pi = netdev_priv(dev);
-
-	/* first do the secondary unicast addresses */
-	for (offset = 0; ; offset += naddr) {
-		naddr = collect_netdev_uc_list_addrs(dev, addr, offset,
-						     ARRAY_SIZE(addr));
-		if (naddr == 0)
-			break;
-
-		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, NULL, &uhash, sleep);
-		if (ret < 0)
-			return ret;
-
-		free = false;
-	}
-
-	/* next set up the multicast addresses */
-	for (offset = 0; ; offset += naddr) {
-		naddr = collect_netdev_mc_list_addrs(dev, addr, offset,
-						     ARRAY_SIZE(addr));
-		if (naddr == 0)
-			break;
-
-		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, NULL, &mhash, sleep);
-		if (ret < 0)
-			return ret;
-		free = false;
-	}
-
-	return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,
-				  uhash | mhash, sleep);
-}
-
-/*
- * Set RX properties of a port, such as promiscruity, address filters, and MTU.
- * If @mtu is -1 it is left unchanged.
- */
-static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok)
-{
-	int ret;
-	struct port_info *pi = netdev_priv(dev);
-
-	ret = set_addr_filters(dev, sleep_ok);
-	if (ret == 0)
-		ret = t4vf_set_rxmode(pi->adapter, pi->viid, -1,
-				      (dev->flags & IFF_PROMISC) != 0,
-				      (dev->flags & IFF_ALLMULTI) != 0,
-				      1, -1, sleep_ok);
-	return ret;
-}
-
-/*
- * Set the current receive modes on the device.
- */
-static void cxgb4vf_set_rxmode(struct net_device *dev)
-{
-	/* unfortunately we can't return errors to the stack */
-	set_rxmode(dev, -1, false);
-}
-
-/*
- * Find the entry in the interrupt holdoff timer value array which comes
- * closest to the specified interrupt holdoff value.
- */
-static int closest_timer(const struct sge *s, int us)
-{
-	int i, timer_idx = 0, min_delta = INT_MAX;
-
-	for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
-		int delta = us - s->timer_val[i];
-		if (delta < 0)
-			delta = -delta;
-		if (delta < min_delta) {
-			min_delta = delta;
-			timer_idx = i;
-		}
-	}
-	return timer_idx;
-}
-
-static int closest_thres(const struct sge *s, int thres)
-{
-	int i, delta, pktcnt_idx = 0, min_delta = INT_MAX;
-
-	for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
-		delta = thres - s->counter_val[i];
-		if (delta < 0)
-			delta = -delta;
-		if (delta < min_delta) {
-			min_delta = delta;
-			pktcnt_idx = i;
-		}
-	}
-	return pktcnt_idx;
-}
-
-/*
- * Return a queue's interrupt hold-off time in us.  0 means no timer.
- */
-static unsigned int qtimer_val(const struct adapter *adapter,
-			       const struct sge_rspq *rspq)
-{
-	unsigned int timer_idx = QINTR_TIMER_IDX_GET(rspq->intr_params);
-
-	return timer_idx < SGE_NTIMERS
-		? adapter->sge.timer_val[timer_idx]
-		: 0;
-}
-
-/**
- *	set_rxq_intr_params - set a queue's interrupt holdoff parameters
- *	@adapter: the adapter
- *	@rspq: the RX response queue
- *	@us: the hold-off time in us, or 0 to disable timer
- *	@cnt: the hold-off packet count, or 0 to disable counter
- *
- *	Sets an RX response queue's interrupt hold-off time and packet count.
- *	At least one of the two needs to be enabled for the queue to generate
- *	interrupts.
- */
-static int set_rxq_intr_params(struct adapter *adapter, struct sge_rspq *rspq,
-			       unsigned int us, unsigned int cnt)
-{
-	unsigned int timer_idx;
-
-	/*
-	 * If both the interrupt holdoff timer and count are specified as
-	 * zero, default to a holdoff count of 1 ...
-	 */
-	if ((us | cnt) == 0)
-		cnt = 1;
-
-	/*
-	 * If an interrupt holdoff count has been specified, then find the
-	 * closest configured holdoff count and use that.  If the response
-	 * queue has already been created, then update its queue context
-	 * parameters ...
-	 */
-	if (cnt) {
-		int err;
-		u32 v, pktcnt_idx;
-
-		pktcnt_idx = closest_thres(&adapter->sge, cnt);
-		if (rspq->desc && rspq->pktcnt_idx != pktcnt_idx) {
-			v = FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
-			    FW_PARAMS_PARAM_X(
-					FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) |
-			    FW_PARAMS_PARAM_YZ(rspq->cntxt_id);
-			err = t4vf_set_params(adapter, 1, &v, &pktcnt_idx);
-			if (err)
-				return err;
-		}
-		rspq->pktcnt_idx = pktcnt_idx;
-	}
-
-	/*
-	 * Compute the closest holdoff timer index from the supplied holdoff
-	 * timer value.
-	 */
-	timer_idx = (us == 0
-		     ? SGE_TIMER_RSTRT_CNTR
-		     : closest_timer(&adapter->sge, us));
-
-	/*
-	 * Update the response queue's interrupt coalescing parameters and
-	 * return success.
-	 */
-	rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) |
-			     (cnt > 0 ? QINTR_CNT_EN : 0));
-	return 0;
-}
-
-/*
- * Return a version number to identify the type of adapter.  The scheme is:
- * - bits 0..9: chip version
- * - bits 10..15: chip revision
- */
-static inline unsigned int mk_adap_vers(const struct adapter *adapter)
-{
-	/*
-	 * Chip version 4, revision 0x3f (cxgb4vf).
-	 */
-	return 4 | (0x3f << 10);
-}
-
-/*
- * Execute the specified ioctl command.
- */
-static int cxgb4vf_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	int ret = 0;
-
-	switch (cmd) {
-	    /*
-	     * The VF Driver doesn't have access to any of the other
-	     * common Ethernet device ioctl()'s (like reading/writing
-	     * PHY registers, etc.
-	     */
-
-	default:
-		ret = -EOPNOTSUPP;
-		break;
-	}
-	return ret;
-}
-
-/*
- * Change the device's MTU.
- */
-static int cxgb4vf_change_mtu(struct net_device *dev, int new_mtu)
-{
-	int ret;
-	struct port_info *pi = netdev_priv(dev);
-
-	/* accommodate SACK */
-	if (new_mtu < 81)
-		return -EINVAL;
-
-	ret = t4vf_set_rxmode(pi->adapter, pi->viid, new_mtu,
-			      -1, -1, -1, -1, true);
-	if (!ret)
-		dev->mtu = new_mtu;
-	return ret;
-}
-
-static u32 cxgb4vf_fix_features(struct net_device *dev, u32 features)
-{
-	/*
-	 * Since there is no support for separate rx/tx vlan accel
-	 * enable/disable make sure tx flag is always in same state as rx.
-	 */
-	if (features & NETIF_F_HW_VLAN_RX)
-		features |= NETIF_F_HW_VLAN_TX;
-	else
-		features &= ~NETIF_F_HW_VLAN_TX;
-
-	return features;
-}
-
-static int cxgb4vf_set_features(struct net_device *dev, u32 features)
-{
-	struct port_info *pi = netdev_priv(dev);
-	u32 changed = dev->features ^ features;
-
-	if (changed & NETIF_F_HW_VLAN_RX)
-		t4vf_set_rxmode(pi->adapter, pi->viid, -1, -1, -1, -1,
-				features & NETIF_F_HW_VLAN_TX, 0);
-
-	return 0;
-}
-
-/*
- * Change the devices MAC address.
- */
-static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr)
-{
-	int ret;
-	struct sockaddr *addr = _addr;
-	struct port_info *pi = netdev_priv(dev);
-
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EINVAL;
-
-	ret = t4vf_change_mac(pi->adapter, pi->viid, pi->xact_addr_filt,
-			      addr->sa_data, true);
-	if (ret < 0)
-		return ret;
-
-	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-	pi->xact_addr_filt = ret;
-	return 0;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Poll all of our receive queues.  This is called outside of normal interrupt
- * context.
- */
-static void cxgb4vf_poll_controller(struct net_device *dev)
-{
-	struct port_info *pi = netdev_priv(dev);
-	struct adapter *adapter = pi->adapter;
-
-	if (adapter->flags & USING_MSIX) {
-		struct sge_eth_rxq *rxq;
-		int nqsets;
-
-		rxq = &adapter->sge.ethrxq[pi->first_qset];
-		for (nqsets = pi->nqsets; nqsets; nqsets--) {
-			t4vf_sge_intr_msix(0, &rxq->rspq);
-			rxq++;
-		}
-	} else
-		t4vf_intr_handler(adapter)(0, adapter);
-}
-#endif
-
-/*
- * Ethtool operations.
- * ===================
- *
- * Note that we don't support any ethtool operations which change the physical
- * state of the port to which we're linked.
- */
-
-/*
- * Return current port link settings.
- */
-static int cxgb4vf_get_settings(struct net_device *dev,
-				struct ethtool_cmd *cmd)
-{
-	const struct port_info *pi = netdev_priv(dev);
-
-	cmd->supported = pi->link_cfg.supported;
-	cmd->advertising = pi->link_cfg.advertising;
-	ethtool_cmd_speed_set(cmd,
-			      netif_carrier_ok(dev) ? pi->link_cfg.speed : -1);
-	cmd->duplex = DUPLEX_FULL;
-
-	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
-	cmd->phy_address = pi->port_id;
-	cmd->transceiver = XCVR_EXTERNAL;
-	cmd->autoneg = pi->link_cfg.autoneg;
-	cmd->maxtxpkt = 0;
-	cmd->maxrxpkt = 0;
-	return 0;
-}
-
-/*
- * Return our driver information.
- */
-static void cxgb4vf_get_drvinfo(struct net_device *dev,
-				struct ethtool_drvinfo *drvinfo)
-{
-	struct adapter *adapter = netdev2adap(dev);
-
-	strcpy(drvinfo->driver, KBUILD_MODNAME);
-	strcpy(drvinfo->version, DRV_VERSION);
-	strcpy(drvinfo->bus_info, pci_name(to_pci_dev(dev->dev.parent)));
-	snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
-		 "%u.%u.%u.%u, TP %u.%u.%u.%u",
-		 FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.fwrev),
-		 FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.fwrev),
-		 FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.fwrev),
-		 FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.fwrev),
-		 FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.tprev),
-		 FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.tprev),
-		 FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.tprev),
-		 FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.tprev));
-}
-
-/*
- * Return current adapter message level.
- */
-static u32 cxgb4vf_get_msglevel(struct net_device *dev)
-{
-	return netdev2adap(dev)->msg_enable;
-}
-
-/*
- * Set current adapter message level.
- */
-static void cxgb4vf_set_msglevel(struct net_device *dev, u32 msglevel)
-{
-	netdev2adap(dev)->msg_enable = msglevel;
-}
-
-/*
- * Return the device's current Queue Set ring size parameters along with the
- * allowed maximum values.  Since ethtool doesn't understand the concept of
- * multi-queue devices, we just return the current values associated with the
- * first Queue Set.
- */
-static void cxgb4vf_get_ringparam(struct net_device *dev,
-				  struct ethtool_ringparam *rp)
-{
-	const struct port_info *pi = netdev_priv(dev);
-	const struct sge *s = &pi->adapter->sge;
-
-	rp->rx_max_pending = MAX_RX_BUFFERS;
-	rp->rx_mini_max_pending = MAX_RSPQ_ENTRIES;
-	rp->rx_jumbo_max_pending = 0;
-	rp->tx_max_pending = MAX_TXQ_ENTRIES;
-
-	rp->rx_pending = s->ethrxq[pi->first_qset].fl.size - MIN_FL_RESID;
-	rp->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size;
-	rp->rx_jumbo_pending = 0;
-	rp->tx_pending = s->ethtxq[pi->first_qset].q.size;
-}
-
-/*
- * Set the Queue Set ring size parameters for the device.  Again, since
- * ethtool doesn't allow for the concept of multiple queues per device, we'll
- * apply these new values across all of the Queue Sets associated with the
- * device -- after vetting them of course!
- */
-static int cxgb4vf_set_ringparam(struct net_device *dev,
-				 struct ethtool_ringparam *rp)
-{
-	const struct port_info *pi = netdev_priv(dev);
-	struct adapter *adapter = pi->adapter;
-	struct sge *s = &adapter->sge;
-	int qs;
-
-	if (rp->rx_pending > MAX_RX_BUFFERS ||
-	    rp->rx_jumbo_pending ||
-	    rp->tx_pending > MAX_TXQ_ENTRIES ||
-	    rp->rx_mini_pending > MAX_RSPQ_ENTRIES ||
-	    rp->rx_mini_pending < MIN_RSPQ_ENTRIES ||
-	    rp->rx_pending < MIN_FL_ENTRIES ||
-	    rp->tx_pending < MIN_TXQ_ENTRIES)
-		return -EINVAL;
-
-	if (adapter->flags & FULL_INIT_DONE)
-		return -EBUSY;
-
-	for (qs = pi->first_qset; qs < pi->first_qset + pi->nqsets; qs++) {
-		s->ethrxq[qs].fl.size = rp->rx_pending + MIN_FL_RESID;
-		s->ethrxq[qs].rspq.size = rp->rx_mini_pending;
-		s->ethtxq[qs].q.size = rp->tx_pending;
-	}
-	return 0;
-}
-
-/*
- * Return the interrupt holdoff timer and count for the first Queue Set on the
- * device.  Our extension ioctl() (the cxgbtool interface) allows the
- * interrupt holdoff timer to be read on all of the device's Queue Sets.
- */
-static int cxgb4vf_get_coalesce(struct net_device *dev,
-				struct ethtool_coalesce *coalesce)
-{
-	const struct port_info *pi = netdev_priv(dev);
-	const struct adapter *adapter = pi->adapter;
-	const struct sge_rspq *rspq = &adapter->sge.ethrxq[pi->first_qset].rspq;
-
-	coalesce->rx_coalesce_usecs = qtimer_val(adapter, rspq);
-	coalesce->rx_max_coalesced_frames =
-		((rspq->intr_params & QINTR_CNT_EN)
-		 ? adapter->sge.counter_val[rspq->pktcnt_idx]
-		 : 0);
-	return 0;
-}
-
-/*
- * Set the RX interrupt holdoff timer and count for the first Queue Set on the
- * interface.  Our extension ioctl() (the cxgbtool interface) allows us to set
- * the interrupt holdoff timer on any of the device's Queue Sets.
- */
-static int cxgb4vf_set_coalesce(struct net_device *dev,
-				struct ethtool_coalesce *coalesce)
-{
-	const struct port_info *pi = netdev_priv(dev);
-	struct adapter *adapter = pi->adapter;
-
-	return set_rxq_intr_params(adapter,
-				   &adapter->sge.ethrxq[pi->first_qset].rspq,
-				   coalesce->rx_coalesce_usecs,
-				   coalesce->rx_max_coalesced_frames);
-}
-
-/*
- * Report current port link pause parameter settings.
- */
-static void cxgb4vf_get_pauseparam(struct net_device *dev,
-				   struct ethtool_pauseparam *pauseparam)
-{
-	struct port_info *pi = netdev_priv(dev);
-
-	pauseparam->autoneg = (pi->link_cfg.requested_fc & PAUSE_AUTONEG) != 0;
-	pauseparam->rx_pause = (pi->link_cfg.fc & PAUSE_RX) != 0;
-	pauseparam->tx_pause = (pi->link_cfg.fc & PAUSE_TX) != 0;
-}
-
-/*
- * Identify the port by blinking the port's LED.
- */
-static int cxgb4vf_phys_id(struct net_device *dev,
-			   enum ethtool_phys_id_state state)
-{
-	unsigned int val;
-	struct port_info *pi = netdev_priv(dev);
-
-	if (state == ETHTOOL_ID_ACTIVE)
-		val = 0xffff;
-	else if (state == ETHTOOL_ID_INACTIVE)
-		val = 0;
-	else
-		return -EINVAL;
-
-	return t4vf_identify_port(pi->adapter, pi->viid, val);
-}
-
-/*
- * Port stats maintained per queue of the port.
- */
-struct queue_port_stats {
-	u64 tso;
-	u64 tx_csum;
-	u64 rx_csum;
-	u64 vlan_ex;
-	u64 vlan_ins;
-	u64 lro_pkts;
-	u64 lro_merged;
-};
-
-/*
- * Strings for the ETH_SS_STATS statistics set ("ethtool -S").  Note that
- * these need to match the order of statistics returned by
- * t4vf_get_port_stats().
- */
-static const char stats_strings[][ETH_GSTRING_LEN] = {
-	/*
-	 * These must match the layout of the t4vf_port_stats structure.
-	 */
-	"TxBroadcastBytes  ",
-	"TxBroadcastFrames ",
-	"TxMulticastBytes  ",
-	"TxMulticastFrames ",
-	"TxUnicastBytes    ",
-	"TxUnicastFrames   ",
-	"TxDroppedFrames   ",
-	"TxOffloadBytes    ",
-	"TxOffloadFrames   ",
-	"RxBroadcastBytes  ",
-	"RxBroadcastFrames ",
-	"RxMulticastBytes  ",
-	"RxMulticastFrames ",
-	"RxUnicastBytes    ",
-	"RxUnicastFrames   ",
-	"RxErrorFrames     ",
-
-	/*
-	 * These are accumulated per-queue statistics and must match the
-	 * order of the fields in the queue_port_stats structure.
-	 */
-	"TSO               ",
-	"TxCsumOffload     ",
-	"RxCsumGood        ",
-	"VLANextractions   ",
-	"VLANinsertions    ",
-	"GROPackets        ",
-	"GROMerged         ",
-};
-
-/*
- * Return the number of statistics in the specified statistics set.
- */
-static int cxgb4vf_get_sset_count(struct net_device *dev, int sset)
-{
-	switch (sset) {
-	case ETH_SS_STATS:
-		return ARRAY_SIZE(stats_strings);
-	default:
-		return -EOPNOTSUPP;
-	}
-	/*NOTREACHED*/
-}
-
-/*
- * Return the strings for the specified statistics set.
- */
-static void cxgb4vf_get_strings(struct net_device *dev,
-				u32 sset,
-				u8 *data)
-{
-	switch (sset) {
-	case ETH_SS_STATS:
-		memcpy(data, stats_strings, sizeof(stats_strings));
-		break;
-	}
-}
-
-/*
- * Small utility routine to accumulate queue statistics across the queues of
- * a "port".
- */
-static void collect_sge_port_stats(const struct adapter *adapter,
-				   const struct port_info *pi,
-				   struct queue_port_stats *stats)
-{
-	const struct sge_eth_txq *txq = &adapter->sge.ethtxq[pi->first_qset];
-	const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset];
-	int qs;
-
-	memset(stats, 0, sizeof(*stats));
-	for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) {
-		stats->tso += txq->tso;
-		stats->tx_csum += txq->tx_cso;
-		stats->rx_csum += rxq->stats.rx_cso;
-		stats->vlan_ex += rxq->stats.vlan_ex;
-		stats->vlan_ins += txq->vlan_ins;
-		stats->lro_pkts += rxq->stats.lro_pkts;
-		stats->lro_merged += rxq->stats.lro_merged;
-	}
-}
-
-/*
- * Return the ETH_SS_STATS statistics set.
- */
-static void cxgb4vf_get_ethtool_stats(struct net_device *dev,
-				      struct ethtool_stats *stats,
-				      u64 *data)
-{
-	struct port_info *pi = netdev2pinfo(dev);
-	struct adapter *adapter = pi->adapter;
-	int err = t4vf_get_port_stats(adapter, pi->pidx,
-				      (struct t4vf_port_stats *)data);
-	if (err)
-		memset(data, 0, sizeof(struct t4vf_port_stats));
-
-	data += sizeof(struct t4vf_port_stats) / sizeof(u64);
-	collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data);
-}
-
-/*
- * Return the size of our register map.
- */
-static int cxgb4vf_get_regs_len(struct net_device *dev)
-{
-	return T4VF_REGMAP_SIZE;
-}
-
-/*
- * Dump a block of registers, start to end inclusive, into a buffer.
- */
-static void reg_block_dump(struct adapter *adapter, void *regbuf,
-			   unsigned int start, unsigned int end)
-{
-	u32 *bp = regbuf + start - T4VF_REGMAP_START;
-
-	for ( ; start <= end; start += sizeof(u32)) {
-		/*
-		 * Avoid reading the Mailbox Control register since that
-		 * can trigger a Mailbox Ownership Arbitration cycle and
-		 * interfere with communication with the firmware.
-		 */
-		if (start == T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL)
-			*bp++ = 0xffff;
-		else
-			*bp++ = t4_read_reg(adapter, start);
-	}
-}
-
-/*
- * Copy our entire register map into the provided buffer.
- */
-static void cxgb4vf_get_regs(struct net_device *dev,
-			     struct ethtool_regs *regs,
-			     void *regbuf)
-{
-	struct adapter *adapter = netdev2adap(dev);
-
-	regs->version = mk_adap_vers(adapter);
-
-	/*
-	 * Fill in register buffer with our register map.
-	 */
-	memset(regbuf, 0, T4VF_REGMAP_SIZE);
-
-	reg_block_dump(adapter, regbuf,
-		       T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_FIRST,
-		       T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_LAST);
-	reg_block_dump(adapter, regbuf,
-		       T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_FIRST,
-		       T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_LAST);
-	reg_block_dump(adapter, regbuf,
-		       T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_FIRST,
-		       T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_LAST);
-	reg_block_dump(adapter, regbuf,
-		       T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_FIRST,
-		       T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_LAST);
-
-	reg_block_dump(adapter, regbuf,
-		       T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_FIRST,
-		       T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_LAST);
-}
-
-/*
- * Report current Wake On LAN settings.
- */
-static void cxgb4vf_get_wol(struct net_device *dev,
-			    struct ethtool_wolinfo *wol)
-{
-	wol->supported = 0;
-	wol->wolopts = 0;
-	memset(&wol->sopass, 0, sizeof(wol->sopass));
-}
-
-/*
- * TCP Segmentation Offload flags which we support.
- */
-#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
-
-static struct ethtool_ops cxgb4vf_ethtool_ops = {
-	.get_settings		= cxgb4vf_get_settings,
-	.get_drvinfo		= cxgb4vf_get_drvinfo,
-	.get_msglevel		= cxgb4vf_get_msglevel,
-	.set_msglevel		= cxgb4vf_set_msglevel,
-	.get_ringparam		= cxgb4vf_get_ringparam,
-	.set_ringparam		= cxgb4vf_set_ringparam,
-	.get_coalesce		= cxgb4vf_get_coalesce,
-	.set_coalesce		= cxgb4vf_set_coalesce,
-	.get_pauseparam		= cxgb4vf_get_pauseparam,
-	.get_link		= ethtool_op_get_link,
-	.get_strings		= cxgb4vf_get_strings,
-	.set_phys_id		= cxgb4vf_phys_id,
-	.get_sset_count		= cxgb4vf_get_sset_count,
-	.get_ethtool_stats	= cxgb4vf_get_ethtool_stats,
-	.get_regs_len		= cxgb4vf_get_regs_len,
-	.get_regs		= cxgb4vf_get_regs,
-	.get_wol		= cxgb4vf_get_wol,
-};
-
-/*
- * /sys/kernel/debug/cxgb4vf support code and data.
- * ================================================
- */
-
-/*
- * Show SGE Queue Set information.  We display QPL Queues Sets per line.
- */
-#define QPL	4
-
-static int sge_qinfo_show(struct seq_file *seq, void *v)
-{
-	struct adapter *adapter = seq->private;
-	int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL);
-	int qs, r = (uintptr_t)v - 1;
-
-	if (r)
-		seq_putc(seq, '\n');
-
-	#define S3(fmt_spec, s, v) \
-		do {\
-			seq_printf(seq, "%-12s", s); \
-			for (qs = 0; qs < n; ++qs) \
-				seq_printf(seq, " %16" fmt_spec, v); \
-			seq_putc(seq, '\n'); \
-		} while (0)
-	#define S(s, v)		S3("s", s, v)
-	#define T(s, v)		S3("u", s, txq[qs].v)
-	#define R(s, v)		S3("u", s, rxq[qs].v)
-
-	if (r < eth_entries) {
-		const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL];
-		const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL];
-		int n = min(QPL, adapter->sge.ethqsets - QPL * r);
-
-		S("QType:", "Ethernet");
-		S("Interface:",
-		  (rxq[qs].rspq.netdev
-		   ? rxq[qs].rspq.netdev->name
-		   : "N/A"));
-		S3("d", "Port:",
-		   (rxq[qs].rspq.netdev
-		    ? ((struct port_info *)
-		       netdev_priv(rxq[qs].rspq.netdev))->port_id
-		    : -1));
-		T("TxQ ID:", q.abs_id);
-		T("TxQ size:", q.size);
-		T("TxQ inuse:", q.in_use);
-		T("TxQ PIdx:", q.pidx);
-		T("TxQ CIdx:", q.cidx);
-		R("RspQ ID:", rspq.abs_id);
-		R("RspQ size:", rspq.size);
-		R("RspQE size:", rspq.iqe_len);
-		S3("u", "Intr delay:", qtimer_val(adapter, &rxq[qs].rspq));
-		S3("u", "Intr pktcnt:",
-		   adapter->sge.counter_val[rxq[qs].rspq.pktcnt_idx]);
-		R("RspQ CIdx:", rspq.cidx);
-		R("RspQ Gen:", rspq.gen);
-		R("FL ID:", fl.abs_id);
-		R("FL size:", fl.size - MIN_FL_RESID);
-		R("FL avail:", fl.avail);
-		R("FL PIdx:", fl.pidx);
-		R("FL CIdx:", fl.cidx);
-		return 0;
-	}
-
-	r -= eth_entries;
-	if (r == 0) {
-		const struct sge_rspq *evtq = &adapter->sge.fw_evtq;
-
-		seq_printf(seq, "%-12s %16s\n", "QType:", "FW event queue");
-		seq_printf(seq, "%-12s %16u\n", "RspQ ID:", evtq->abs_id);
-		seq_printf(seq, "%-12s %16u\n", "Intr delay:",
-			   qtimer_val(adapter, evtq));
-		seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:",
-			   adapter->sge.counter_val[evtq->pktcnt_idx]);
-		seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", evtq->cidx);
-		seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", evtq->gen);
-	} else if (r == 1) {
-		const struct sge_rspq *intrq = &adapter->sge.intrq;
-
-		seq_printf(seq, "%-12s %16s\n", "QType:", "Interrupt Queue");
-		seq_printf(seq, "%-12s %16u\n", "RspQ ID:", intrq->abs_id);
-		seq_printf(seq, "%-12s %16u\n", "Intr delay:",
-			   qtimer_val(adapter, intrq));
-		seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:",
-			   adapter->sge.counter_val[intrq->pktcnt_idx]);
-		seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", intrq->cidx);
-		seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", intrq->gen);
-	}
-
-	#undef R
-	#undef T
-	#undef S
-	#undef S3
-
-	return 0;
-}
-
-/*
- * Return the number of "entries" in our "file".  We group the multi-Queue
- * sections with QPL Queue Sets per "entry".  The sections of the output are:
- *
- *     Ethernet RX/TX Queue Sets
- *     Firmware Event Queue
- *     Forwarded Interrupt Queue (if in MSI mode)
- */
-static int sge_queue_entries(const struct adapter *adapter)
-{
-	return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 +
-		((adapter->flags & USING_MSI) != 0);
-}
-
-static void *sge_queue_start(struct seq_file *seq, loff_t *pos)
-{
-	int entries = sge_queue_entries(seq->private);
-
-	return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
-}
-
-static void sge_queue_stop(struct seq_file *seq, void *v)
-{
-}
-
-static void *sge_queue_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	int entries = sge_queue_entries(seq->private);
-
-	++*pos;
-	return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
-}
-
-static const struct seq_operations sge_qinfo_seq_ops = {
-	.start = sge_queue_start,
-	.next  = sge_queue_next,
-	.stop  = sge_queue_stop,
-	.show  = sge_qinfo_show
-};
-
-static int sge_qinfo_open(struct inode *inode, struct file *file)
-{
-	int res = seq_open(file, &sge_qinfo_seq_ops);
-
-	if (!res) {
-		struct seq_file *seq = file->private_data;
-		seq->private = inode->i_private;
-	}
-	return res;
-}
-
-static const struct file_operations sge_qinfo_debugfs_fops = {
-	.owner   = THIS_MODULE,
-	.open    = sge_qinfo_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release,
-};
-
-/*
- * Show SGE Queue Set statistics.  We display QPL Queues Sets per line.
- */
-#define QPL	4
-
-static int sge_qstats_show(struct seq_file *seq, void *v)
-{
-	struct adapter *adapter = seq->private;
-	int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL);
-	int qs, r = (uintptr_t)v - 1;
-
-	if (r)
-		seq_putc(seq, '\n');
-
-	#define S3(fmt, s, v) \
-		do { \
-			seq_printf(seq, "%-16s", s); \
-			for (qs = 0; qs < n; ++qs) \
-				seq_printf(seq, " %8" fmt, v); \
-			seq_putc(seq, '\n'); \
-		} while (0)
-	#define S(s, v)		S3("s", s, v)
-
-	#define T3(fmt, s, v)	S3(fmt, s, txq[qs].v)
-	#define T(s, v)		T3("lu", s, v)
-
-	#define R3(fmt, s, v)	S3(fmt, s, rxq[qs].v)
-	#define R(s, v)		R3("lu", s, v)
-
-	if (r < eth_entries) {
-		const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL];
-		const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL];
-		int n = min(QPL, adapter->sge.ethqsets - QPL * r);
-
-		S("QType:", "Ethernet");
-		S("Interface:",
-		  (rxq[qs].rspq.netdev
-		   ? rxq[qs].rspq.netdev->name
-		   : "N/A"));
-		R3("u", "RspQNullInts:", rspq.unhandled_irqs);
-		R("RxPackets:", stats.pkts);
-		R("RxCSO:", stats.rx_cso);
-		R("VLANxtract:", stats.vlan_ex);
-		R("LROmerged:", stats.lro_merged);
-		R("LROpackets:", stats.lro_pkts);
-		R("RxDrops:", stats.rx_drops);
-		T("TSO:", tso);
-		T("TxCSO:", tx_cso);
-		T("VLANins:", vlan_ins);
-		T("TxQFull:", q.stops);
-		T("TxQRestarts:", q.restarts);
-		T("TxMapErr:", mapping_err);
-		R("FLAllocErr:", fl.alloc_failed);
-		R("FLLrgAlcErr:", fl.large_alloc_failed);
-		R("FLStarving:", fl.starving);
-		return 0;
-	}
-
-	r -= eth_entries;
-	if (r == 0) {
-		const struct sge_rspq *evtq = &adapter->sge.fw_evtq;
-
-		seq_printf(seq, "%-8s %16s\n", "QType:", "FW event queue");
-		seq_printf(seq, "%-16s %8u\n", "RspQNullInts:",
-			   evtq->unhandled_irqs);
-		seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", evtq->cidx);
-		seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", evtq->gen);
-	} else if (r == 1) {
-		const struct sge_rspq *intrq = &adapter->sge.intrq;
-
-		seq_printf(seq, "%-8s %16s\n", "QType:", "Interrupt Queue");
-		seq_printf(seq, "%-16s %8u\n", "RspQNullInts:",
-			   intrq->unhandled_irqs);
-		seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", intrq->cidx);
-		seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", intrq->gen);
-	}
-
-	#undef R
-	#undef T
-	#undef S
-	#undef R3
-	#undef T3
-	#undef S3
-
-	return 0;
-}
-
-/*
- * Return the number of "entries" in our "file".  We group the multi-Queue
- * sections with QPL Queue Sets per "entry".  The sections of the output are:
- *
- *     Ethernet RX/TX Queue Sets
- *     Firmware Event Queue
- *     Forwarded Interrupt Queue (if in MSI mode)
- */
-static int sge_qstats_entries(const struct adapter *adapter)
-{
-	return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 +
-		((adapter->flags & USING_MSI) != 0);
-}
-
-static void *sge_qstats_start(struct seq_file *seq, loff_t *pos)
-{
-	int entries = sge_qstats_entries(seq->private);
-
-	return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
-}
-
-static void sge_qstats_stop(struct seq_file *seq, void *v)
-{
-}
-
-static void *sge_qstats_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	int entries = sge_qstats_entries(seq->private);
-
-	(*pos)++;
-	return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
-}
-
-static const struct seq_operations sge_qstats_seq_ops = {
-	.start = sge_qstats_start,
-	.next  = sge_qstats_next,
-	.stop  = sge_qstats_stop,
-	.show  = sge_qstats_show
-};
-
-static int sge_qstats_open(struct inode *inode, struct file *file)
-{
-	int res = seq_open(file, &sge_qstats_seq_ops);
-
-	if (res == 0) {
-		struct seq_file *seq = file->private_data;
-		seq->private = inode->i_private;
-	}
-	return res;
-}
-
-static const struct file_operations sge_qstats_proc_fops = {
-	.owner   = THIS_MODULE,
-	.open    = sge_qstats_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release,
-};
-
-/*
- * Show PCI-E SR-IOV Virtual Function Resource Limits.
- */
-static int resources_show(struct seq_file *seq, void *v)
-{
-	struct adapter *adapter = seq->private;
-	struct vf_resources *vfres = &adapter->params.vfres;
-
-	#define S(desc, fmt, var) \
-		seq_printf(seq, "%-60s " fmt "\n", \
-			   desc " (" #var "):", vfres->var)
-
-	S("Virtual Interfaces", "%d", nvi);
-	S("Egress Queues", "%d", neq);
-	S("Ethernet Control", "%d", nethctrl);
-	S("Ingress Queues/w Free Lists/Interrupts", "%d", niqflint);
-	S("Ingress Queues", "%d", niq);
-	S("Traffic Class", "%d", tc);
-	S("Port Access Rights Mask", "%#x", pmask);
-	S("MAC Address Filters", "%d", nexactf);
-	S("Firmware Command Read Capabilities", "%#x", r_caps);
-	S("Firmware Command Write/Execute Capabilities", "%#x", wx_caps);
-
-	#undef S
-
-	return 0;
-}
-
-static int resources_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, resources_show, inode->i_private);
-}
-
-static const struct file_operations resources_proc_fops = {
-	.owner   = THIS_MODULE,
-	.open    = resources_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = single_release,
-};
-
-/*
- * Show Virtual Interfaces.
- */
-static int interfaces_show(struct seq_file *seq, void *v)
-{
-	if (v == SEQ_START_TOKEN) {
-		seq_puts(seq, "Interface  Port   VIID\n");
-	} else {
-		struct adapter *adapter = seq->private;
-		int pidx = (uintptr_t)v - 2;
-		struct net_device *dev = adapter->port[pidx];
-		struct port_info *pi = netdev_priv(dev);
-
-		seq_printf(seq, "%9s  %4d  %#5x\n",
-			   dev->name, pi->port_id, pi->viid);
-	}
-	return 0;
-}
-
-static inline void *interfaces_get_idx(struct adapter *adapter, loff_t pos)
-{
-	return pos <= adapter->params.nports
-		? (void *)(uintptr_t)(pos + 1)
-		: NULL;
-}
-
-static void *interfaces_start(struct seq_file *seq, loff_t *pos)
-{
-	return *pos
-		? interfaces_get_idx(seq->private, *pos)
-		: SEQ_START_TOKEN;
-}
-
-static void *interfaces_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	(*pos)++;
-	return interfaces_get_idx(seq->private, *pos);
-}
-
-static void interfaces_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations interfaces_seq_ops = {
-	.start = interfaces_start,
-	.next  = interfaces_next,
-	.stop  = interfaces_stop,
-	.show  = interfaces_show
-};
-
-static int interfaces_open(struct inode *inode, struct file *file)
-{
-	int res = seq_open(file, &interfaces_seq_ops);
-
-	if (res == 0) {
-		struct seq_file *seq = file->private_data;
-		seq->private = inode->i_private;
-	}
-	return res;
-}
-
-static const struct file_operations interfaces_proc_fops = {
-	.owner   = THIS_MODULE,
-	.open    = interfaces_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release,
-};
-
-/*
- * /sys/kernel/debugfs/cxgb4vf/ files list.
- */
-struct cxgb4vf_debugfs_entry {
-	const char *name;		/* name of debugfs node */
-	mode_t mode;			/* file system mode */
-	const struct file_operations *fops;
-};
-
-static struct cxgb4vf_debugfs_entry debugfs_files[] = {
-	{ "sge_qinfo",  S_IRUGO, &sge_qinfo_debugfs_fops },
-	{ "sge_qstats", S_IRUGO, &sge_qstats_proc_fops },
-	{ "resources",  S_IRUGO, &resources_proc_fops },
-	{ "interfaces", S_IRUGO, &interfaces_proc_fops },
-};
-
-/*
- * Module and device initialization and cleanup code.
- * ==================================================
- */
-
-/*
- * Set up out /sys/kernel/debug/cxgb4vf sub-nodes.  We assume that the
- * directory (debugfs_root) has already been set up.
- */
-static int __devinit setup_debugfs(struct adapter *adapter)
-{
-	int i;
-
-	BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root));
-
-	/*
-	 * Debugfs support is best effort.
-	 */
-	for (i = 0; i < ARRAY_SIZE(debugfs_files); i++)
-		(void)debugfs_create_file(debugfs_files[i].name,
-				  debugfs_files[i].mode,
-				  adapter->debugfs_root,
-				  (void *)adapter,
-				  debugfs_files[i].fops);
-
-	return 0;
-}
-
-/*
- * Tear down the /sys/kernel/debug/cxgb4vf sub-nodes created above.  We leave
- * it to our caller to tear down the directory (debugfs_root).
- */
-static void cleanup_debugfs(struct adapter *adapter)
-{
-	BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root));
-
-	/*
-	 * Unlike our sister routine cleanup_proc(), we don't need to remove
-	 * individual entries because a call will be made to
-	 * debugfs_remove_recursive().  We just need to clean up any ancillary
-	 * persistent state.
-	 */
-	/* nothing to do */
-}
-
-/*
- * Perform early "adapter" initialization.  This is where we discover what
- * adapter parameters we're going to be using and initialize basic adapter
- * hardware support.
- */
-static int __devinit adap_init0(struct adapter *adapter)
-{
-	struct vf_resources *vfres = &adapter->params.vfres;
-	struct sge_params *sge_params = &adapter->params.sge;
-	struct sge *s = &adapter->sge;
-	unsigned int ethqsets;
-	int err;
-
-	/*
-	 * Wait for the device to become ready before proceeding ...
-	 */
-	err = t4vf_wait_dev_ready(adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "device didn't become ready:"
-			" err=%d\n", err);
-		return err;
-	}
-
-	/*
-	 * Some environments do not properly handle PCIE FLRs -- e.g. in Linux
-	 * 2.6.31 and later we can't call pci_reset_function() in order to
-	 * issue an FLR because of a self- deadlock on the device semaphore.
-	 * Meanwhile, the OS infrastructure doesn't issue FLRs in all the
-	 * cases where they're needed -- for instance, some versions of KVM
-	 * fail to reset "Assigned Devices" when the VM reboots.  Therefore we
-	 * use the firmware based reset in order to reset any per function
-	 * state.
-	 */
-	err = t4vf_fw_reset(adapter);
-	if (err < 0) {
-		dev_err(adapter->pdev_dev, "FW reset failed: err=%d\n", err);
-		return err;
-	}
-
-	/*
-	 * Grab basic operational parameters.  These will predominantly have
-	 * been set up by the Physical Function Driver or will be hard coded
-	 * into the adapter.  We just have to live with them ...  Note that
-	 * we _must_ get our VPD parameters before our SGE parameters because
-	 * we need to know the adapter's core clock from the VPD in order to
-	 * properly decode the SGE Timer Values.
-	 */
-	err = t4vf_get_dev_params(adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "unable to retrieve adapter"
-			" device parameters: err=%d\n", err);
-		return err;
-	}
-	err = t4vf_get_vpd_params(adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "unable to retrieve adapter"
-			" VPD parameters: err=%d\n", err);
-		return err;
-	}
-	err = t4vf_get_sge_params(adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "unable to retrieve adapter"
-			" SGE parameters: err=%d\n", err);
-		return err;
-	}
-	err = t4vf_get_rss_glb_config(adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "unable to retrieve adapter"
-			" RSS parameters: err=%d\n", err);
-		return err;
-	}
-	if (adapter->params.rss.mode !=
-	    FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
-		dev_err(adapter->pdev_dev, "unable to operate with global RSS"
-			" mode %d\n", adapter->params.rss.mode);
-		return -EINVAL;
-	}
-	err = t4vf_sge_init(adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "unable to use adapter parameters:"
-			" err=%d\n", err);
-		return err;
-	}
-
-	/*
-	 * Retrieve our RX interrupt holdoff timer values and counter
-	 * threshold values from the SGE parameters.
-	 */
-	s->timer_val[0] = core_ticks_to_us(adapter,
-		TIMERVALUE0_GET(sge_params->sge_timer_value_0_and_1));
-	s->timer_val[1] = core_ticks_to_us(adapter,
-		TIMERVALUE1_GET(sge_params->sge_timer_value_0_and_1));
-	s->timer_val[2] = core_ticks_to_us(adapter,
-		TIMERVALUE0_GET(sge_params->sge_timer_value_2_and_3));
-	s->timer_val[3] = core_ticks_to_us(adapter,
-		TIMERVALUE1_GET(sge_params->sge_timer_value_2_and_3));
-	s->timer_val[4] = core_ticks_to_us(adapter,
-		TIMERVALUE0_GET(sge_params->sge_timer_value_4_and_5));
-	s->timer_val[5] = core_ticks_to_us(adapter,
-		TIMERVALUE1_GET(sge_params->sge_timer_value_4_and_5));
-
-	s->counter_val[0] =
-		THRESHOLD_0_GET(sge_params->sge_ingress_rx_threshold);
-	s->counter_val[1] =
-		THRESHOLD_1_GET(sge_params->sge_ingress_rx_threshold);
-	s->counter_val[2] =
-		THRESHOLD_2_GET(sge_params->sge_ingress_rx_threshold);
-	s->counter_val[3] =
-		THRESHOLD_3_GET(sge_params->sge_ingress_rx_threshold);
-
-	/*
-	 * Grab our Virtual Interface resource allocation, extract the
-	 * features that we're interested in and do a bit of sanity testing on
-	 * what we discover.
-	 */
-	err = t4vf_get_vfres(adapter);
-	if (err) {
-		dev_err(adapter->pdev_dev, "unable to get virtual interface"
-			" resources: err=%d\n", err);
-		return err;
-	}
-
-	/*
-	 * The number of "ports" which we support is equal to the number of
-	 * Virtual Interfaces with which we've been provisioned.
-	 */
-	adapter->params.nports = vfres->nvi;
-	if (adapter->params.nports > MAX_NPORTS) {
-		dev_warn(adapter->pdev_dev, "only using %d of %d allowed"
-			 " virtual interfaces\n", MAX_NPORTS,
-			 adapter->params.nports);
-		adapter->params.nports = MAX_NPORTS;
-	}
-
-	/*
-	 * We need to reserve a number of the ingress queues with Free List
-	 * and Interrupt capabilities for special interrupt purposes (like
-	 * asynchronous firmware messages, or forwarded interrupts if we're
-	 * using MSI).  The rest of the FL/Intr-capable ingress queues will be
-	 * matched up one-for-one with Ethernet/Control egress queues in order
-	 * to form "Queue Sets" which will be aportioned between the "ports".
-	 * For each Queue Set, we'll need the ability to allocate two Egress
-	 * Contexts -- one for the Ingress Queue Free List and one for the TX
-	 * Ethernet Queue.
-	 */
-	ethqsets = vfres->niqflint - INGQ_EXTRAS;
-	if (vfres->nethctrl != ethqsets) {
-		dev_warn(adapter->pdev_dev, "unequal number of [available]"
-			 " ingress/egress queues (%d/%d); using minimum for"
-			 " number of Queue Sets\n", ethqsets, vfres->nethctrl);
-		ethqsets = min(vfres->nethctrl, ethqsets);
-	}
-	if (vfres->neq < ethqsets*2) {
-		dev_warn(adapter->pdev_dev, "Not enough Egress Contexts (%d)"
-			 " to support Queue Sets (%d); reducing allowed Queue"
-			 " Sets\n", vfres->neq, ethqsets);
-		ethqsets = vfres->neq/2;
-	}
-	if (ethqsets > MAX_ETH_QSETS) {
-		dev_warn(adapter->pdev_dev, "only using %d of %d allowed Queue"
-			 " Sets\n", MAX_ETH_QSETS, adapter->sge.max_ethqsets);
-		ethqsets = MAX_ETH_QSETS;
-	}
-	if (vfres->niq != 0 || vfres->neq > ethqsets*2) {
-		dev_warn(adapter->pdev_dev, "unused resources niq/neq (%d/%d)"
-			 " ignored\n", vfres->niq, vfres->neq - ethqsets*2);
-	}
-	adapter->sge.max_ethqsets = ethqsets;
-
-	/*
-	 * Check for various parameter sanity issues.  Most checks simply
-	 * result in us using fewer resources than our provissioning but we
-	 * do need at least  one "port" with which to work ...
-	 */
-	if (adapter->sge.max_ethqsets < adapter->params.nports) {
-		dev_warn(adapter->pdev_dev, "only using %d of %d available"
-			 " virtual interfaces (too few Queue Sets)\n",
-			 adapter->sge.max_ethqsets, adapter->params.nports);
-		adapter->params.nports = adapter->sge.max_ethqsets;
-	}
-	if (adapter->params.nports == 0) {
-		dev_err(adapter->pdev_dev, "no virtual interfaces configured/"
-			"usable!\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static inline void init_rspq(struct sge_rspq *rspq, u8 timer_idx,
-			     u8 pkt_cnt_idx, unsigned int size,
-			     unsigned int iqe_size)
-{
-	rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) |
-			     (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0));
-	rspq->pktcnt_idx = (pkt_cnt_idx < SGE_NCOUNTERS
-			    ? pkt_cnt_idx
-			    : 0);
-	rspq->iqe_len = iqe_size;
-	rspq->size = size;
-}
-
-/*
- * Perform default configuration of DMA queues depending on the number and
- * type of ports we found and the number of available CPUs.  Most settings can
- * be modified by the admin via ethtool and cxgbtool prior to the adapter
- * being brought up for the first time.
- */
-static void __devinit cfg_queues(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-	int q10g, n10g, qidx, pidx, qs;
-	size_t iqe_size;
-
-	/*
-	 * We should not be called till we know how many Queue Sets we can
-	 * support.  In particular, this means that we need to know what kind
-	 * of interrupts we'll be using ...
-	 */
-	BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0);
-
-	/*
-	 * Count the number of 10GbE Virtual Interfaces that we have.
-	 */
-	n10g = 0;
-	for_each_port(adapter, pidx)
-		n10g += is_10g_port(&adap2pinfo(adapter, pidx)->link_cfg);
-
-	/*
-	 * We default to 1 queue per non-10G port and up to # of cores queues
-	 * per 10G port.
-	 */
-	if (n10g == 0)
-		q10g = 0;
-	else {
-		int n1g = (adapter->params.nports - n10g);
-		q10g = (adapter->sge.max_ethqsets - n1g) / n10g;
-		if (q10g > num_online_cpus())
-			q10g = num_online_cpus();
-	}
-
-	/*
-	 * Allocate the "Queue Sets" to the various Virtual Interfaces.
-	 * The layout will be established in setup_sge_queues() when the
-	 * adapter is brough up for the first time.
-	 */
-	qidx = 0;
-	for_each_port(adapter, pidx) {
-		struct port_info *pi = adap2pinfo(adapter, pidx);
-
-		pi->first_qset = qidx;
-		pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1;
-		qidx += pi->nqsets;
-	}
-	s->ethqsets = qidx;
-
-	/*
-	 * The Ingress Queue Entry Size for our various Response Queues needs
-	 * to be big enough to accommodate the largest message we can receive
-	 * from the chip/firmware; which is 64 bytes ...
-	 */
-	iqe_size = 64;
-
-	/*
-	 * Set up default Queue Set parameters ...  Start off with the
-	 * shortest interrupt holdoff timer.
-	 */
-	for (qs = 0; qs < s->max_ethqsets; qs++) {
-		struct sge_eth_rxq *rxq = &s->ethrxq[qs];
-		struct sge_eth_txq *txq = &s->ethtxq[qs];
-
-		init_rspq(&rxq->rspq, 0, 0, 1024, iqe_size);
-		rxq->fl.size = 72;
-		txq->q.size = 1024;
-	}
-
-	/*
-	 * The firmware event queue is used for link state changes and
-	 * notifications of TX DMA completions.
-	 */
-	init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, iqe_size);
-
-	/*
-	 * The forwarded interrupt queue is used when we're in MSI interrupt
-	 * mode.  In this mode all interrupts associated with RX queues will
-	 * be forwarded to a single queue which we'll associate with our MSI
-	 * interrupt vector.  The messages dropped in the forwarded interrupt
-	 * queue will indicate which ingress queue needs servicing ...  This
-	 * queue needs to be large enough to accommodate all of the ingress
-	 * queues which are forwarding their interrupt (+1 to prevent the PIDX
-	 * from equalling the CIDX if every ingress queue has an outstanding
-	 * interrupt).  The queue doesn't need to be any larger because no
-	 * ingress queue will ever have more than one outstanding interrupt at
-	 * any time ...
-	 */
-	init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1,
-		  iqe_size);
-}
-
-/*
- * Reduce the number of Ethernet queues across all ports to at most n.
- * n provides at least one queue per port.
- */
-static void __devinit reduce_ethqs(struct adapter *adapter, int n)
-{
-	int i;
-	struct port_info *pi;
-
-	/*
-	 * While we have too many active Ether Queue Sets, interate across the
-	 * "ports" and reduce their individual Queue Set allocations.
-	 */
-	BUG_ON(n < adapter->params.nports);
-	while (n < adapter->sge.ethqsets)
-		for_each_port(adapter, i) {
-			pi = adap2pinfo(adapter, i);
-			if (pi->nqsets > 1) {
-				pi->nqsets--;
-				adapter->sge.ethqsets--;
-				if (adapter->sge.ethqsets <= n)
-					break;
-			}
-		}
-
-	/*
-	 * Reassign the starting Queue Sets for each of the "ports" ...
-	 */
-	n = 0;
-	for_each_port(adapter, i) {
-		pi = adap2pinfo(adapter, i);
-		pi->first_qset = n;
-		n += pi->nqsets;
-	}
-}
-
-/*
- * We need to grab enough MSI-X vectors to cover our interrupt needs.  Ideally
- * we get a separate MSI-X vector for every "Queue Set" plus any extras we
- * need.  Minimally we need one for every Virtual Interface plus those needed
- * for our "extras".  Note that this process may lower the maximum number of
- * allowed Queue Sets ...
- */
-static int __devinit enable_msix(struct adapter *adapter)
-{
-	int i, err, want, need;
-	struct msix_entry entries[MSIX_ENTRIES];
-	struct sge *s = &adapter->sge;
-
-	for (i = 0; i < MSIX_ENTRIES; ++i)
-		entries[i].entry = i;
-
-	/*
-	 * We _want_ enough MSI-X interrupts to cover all of our "Queue Sets"
-	 * plus those needed for our "extras" (for example, the firmware
-	 * message queue).  We _need_ at least one "Queue Set" per Virtual
-	 * Interface plus those needed for our "extras".  So now we get to see
-	 * if the song is right ...
-	 */
-	want = s->max_ethqsets + MSIX_EXTRAS;
-	need = adapter->params.nports + MSIX_EXTRAS;
-	while ((err = pci_enable_msix(adapter->pdev, entries, want)) >= need)
-		want = err;
-
-	if (err == 0) {
-		int nqsets = want - MSIX_EXTRAS;
-		if (nqsets < s->max_ethqsets) {
-			dev_warn(adapter->pdev_dev, "only enough MSI-X vectors"
-				 " for %d Queue Sets\n", nqsets);
-			s->max_ethqsets = nqsets;
-			if (nqsets < s->ethqsets)
-				reduce_ethqs(adapter, nqsets);
-		}
-		for (i = 0; i < want; ++i)
-			adapter->msix_info[i].vec = entries[i].vector;
-	} else if (err > 0) {
-		pci_disable_msix(adapter->pdev);
-		dev_info(adapter->pdev_dev, "only %d MSI-X vectors left,"
-			 " not using MSI-X\n", err);
-	}
-	return err;
-}
-
-static const struct net_device_ops cxgb4vf_netdev_ops	= {
-	.ndo_open		= cxgb4vf_open,
-	.ndo_stop		= cxgb4vf_stop,
-	.ndo_start_xmit		= t4vf_eth_xmit,
-	.ndo_get_stats		= cxgb4vf_get_stats,
-	.ndo_set_rx_mode	= cxgb4vf_set_rxmode,
-	.ndo_set_mac_address	= cxgb4vf_set_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_do_ioctl		= cxgb4vf_do_ioctl,
-	.ndo_change_mtu		= cxgb4vf_change_mtu,
-	.ndo_fix_features	= cxgb4vf_fix_features,
-	.ndo_set_features	= cxgb4vf_set_features,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= cxgb4vf_poll_controller,
-#endif
-};
-
-/*
- * "Probe" a device: initialize a device and construct all kernel and driver
- * state needed to manage the device.  This routine is called "init_one" in
- * the PF Driver ...
- */
-static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
-				       const struct pci_device_id *ent)
-{
-	static int version_printed;
-
-	int pci_using_dac;
-	int err, pidx;
-	unsigned int pmask;
-	struct adapter *adapter;
-	struct port_info *pi;
-	struct net_device *netdev;
-
-	/*
-	 * Print our driver banner the first time we're called to initialize a
-	 * device.
-	 */
-	if (version_printed == 0) {
-		printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
-		version_printed = 1;
-	}
-
-	/*
-	 * Initialize generic PCI device state.
-	 */
-	err = pci_enable_device(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "cannot enable PCI device\n");
-		return err;
-	}
-
-	/*
-	 * Reserve PCI resources for the device.  If we can't get them some
-	 * other driver may have already claimed the device ...
-	 */
-	err = pci_request_regions(pdev, KBUILD_MODNAME);
-	if (err) {
-		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
-		goto err_disable_device;
-	}
-
-	/*
-	 * Set up our DMA mask: try for 64-bit address masking first and
-	 * fall back to 32-bit if we can't get 64 bits ...
-	 */
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (err == 0) {
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-		if (err) {
-			dev_err(&pdev->dev, "unable to obtain 64-bit DMA for"
-				" coherent allocations\n");
-			goto err_release_regions;
-		}
-		pci_using_dac = 1;
-	} else {
-		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (err != 0) {
-			dev_err(&pdev->dev, "no usable DMA configuration\n");
-			goto err_release_regions;
-		}
-		pci_using_dac = 0;
-	}
-
-	/*
-	 * Enable bus mastering for the device ...
-	 */
-	pci_set_master(pdev);
-
-	/*
-	 * Allocate our adapter data structure and attach it to the device.
-	 */
-	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
-	if (!adapter) {
-		err = -ENOMEM;
-		goto err_release_regions;
-	}
-	pci_set_drvdata(pdev, adapter);
-	adapter->pdev = pdev;
-	adapter->pdev_dev = &pdev->dev;
-
-	/*
-	 * Initialize SMP data synchronization resources.
-	 */
-	spin_lock_init(&adapter->stats_lock);
-
-	/*
-	 * Map our I/O registers in BAR0.
-	 */
-	adapter->regs = pci_ioremap_bar(pdev, 0);
-	if (!adapter->regs) {
-		dev_err(&pdev->dev, "cannot map device registers\n");
-		err = -ENOMEM;
-		goto err_free_adapter;
-	}
-
-	/*
-	 * Initialize adapter level features.
-	 */
-	adapter->name = pci_name(pdev);
-	adapter->msg_enable = dflt_msg_enable;
-	err = adap_init0(adapter);
-	if (err)
-		goto err_unmap_bar;
-
-	/*
-	 * Allocate our "adapter ports" and stitch everything together.
-	 */
-	pmask = adapter->params.vfres.pmask;
-	for_each_port(adapter, pidx) {
-		int port_id, viid;
-
-		/*
-		 * We simplistically allocate our virtual interfaces
-		 * sequentially across the port numbers to which we have
-		 * access rights.  This should be configurable in some manner
-		 * ...
-		 */
-		if (pmask == 0)
-			break;
-		port_id = ffs(pmask) - 1;
-		pmask &= ~(1 << port_id);
-		viid = t4vf_alloc_vi(adapter, port_id);
-		if (viid < 0) {
-			dev_err(&pdev->dev, "cannot allocate VI for port %d:"
-				" err=%d\n", port_id, viid);
-			err = viid;
-			goto err_free_dev;
-		}
-
-		/*
-		 * Allocate our network device and stitch things together.
-		 */
-		netdev = alloc_etherdev_mq(sizeof(struct port_info),
-					   MAX_PORT_QSETS);
-		if (netdev == NULL) {
-			dev_err(&pdev->dev, "cannot allocate netdev for"
-				" port %d\n", port_id);
-			t4vf_free_vi(adapter, viid);
-			err = -ENOMEM;
-			goto err_free_dev;
-		}
-		adapter->port[pidx] = netdev;
-		SET_NETDEV_DEV(netdev, &pdev->dev);
-		pi = netdev_priv(netdev);
-		pi->adapter = adapter;
-		pi->pidx = pidx;
-		pi->port_id = port_id;
-		pi->viid = viid;
-
-		/*
-		 * Initialize the starting state of our "port" and register
-		 * it.
-		 */
-		pi->xact_addr_filt = -1;
-		netif_carrier_off(netdev);
-		netdev->irq = pdev->irq;
-
-		netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
-			NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-			NETIF_F_HW_VLAN_RX | NETIF_F_RXCSUM;
-		netdev->vlan_features = NETIF_F_SG | TSO_FLAGS |
-			NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-			NETIF_F_HIGHDMA;
-		netdev->features = netdev->hw_features | NETIF_F_HW_VLAN_TX;
-		if (pci_using_dac)
-			netdev->features |= NETIF_F_HIGHDMA;
-
-		netdev->netdev_ops = &cxgb4vf_netdev_ops;
-		SET_ETHTOOL_OPS(netdev, &cxgb4vf_ethtool_ops);
-
-		/*
-		 * Initialize the hardware/software state for the port.
-		 */
-		err = t4vf_port_init(adapter, pidx);
-		if (err) {
-			dev_err(&pdev->dev, "cannot initialize port %d\n",
-				pidx);
-			goto err_free_dev;
-		}
-	}
-
-	/*
-	 * The "card" is now ready to go.  If any errors occur during device
-	 * registration we do not fail the whole "card" but rather proceed
-	 * only with the ports we manage to register successfully.  However we
-	 * must register at least one net device.
-	 */
-	for_each_port(adapter, pidx) {
-		netdev = adapter->port[pidx];
-		if (netdev == NULL)
-			continue;
-
-		err = register_netdev(netdev);
-		if (err) {
-			dev_warn(&pdev->dev, "cannot register net device %s,"
-				 " skipping\n", netdev->name);
-			continue;
-		}
-
-		set_bit(pidx, &adapter->registered_device_map);
-	}
-	if (adapter->registered_device_map == 0) {
-		dev_err(&pdev->dev, "could not register any net devices\n");
-		goto err_free_dev;
-	}
-
-	/*
-	 * Set up our debugfs entries.
-	 */
-	if (!IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) {
-		adapter->debugfs_root =
-			debugfs_create_dir(pci_name(pdev),
-					   cxgb4vf_debugfs_root);
-		if (IS_ERR_OR_NULL(adapter->debugfs_root))
-			dev_warn(&pdev->dev, "could not create debugfs"
-				 " directory");
-		else
-			setup_debugfs(adapter);
-	}
-
-	/*
-	 * See what interrupts we'll be using.  If we've been configured to
-	 * use MSI-X interrupts, try to enable them but fall back to using
-	 * MSI interrupts if we can't enable MSI-X interrupts.  If we can't
-	 * get MSI interrupts we bail with the error.
-	 */
-	if (msi == MSI_MSIX && enable_msix(adapter) == 0)
-		adapter->flags |= USING_MSIX;
-	else {
-		err = pci_enable_msi(pdev);
-		if (err) {
-			dev_err(&pdev->dev, "Unable to allocate %s interrupts;"
-				" err=%d\n",
-				msi == MSI_MSIX ? "MSI-X or MSI" : "MSI", err);
-			goto err_free_debugfs;
-		}
-		adapter->flags |= USING_MSI;
-	}
-
-	/*
-	 * Now that we know how many "ports" we have and what their types are,
-	 * and how many Queue Sets we can support, we can configure our queue
-	 * resources.
-	 */
-	cfg_queues(adapter);
-
-	/*
-	 * Print a short notice on the existence and configuration of the new
-	 * VF network device ...
-	 */
-	for_each_port(adapter, pidx) {
-		dev_info(adapter->pdev_dev, "%s: Chelsio VF NIC PCIe %s\n",
-			 adapter->port[pidx]->name,
-			 (adapter->flags & USING_MSIX) ? "MSI-X" :
-			 (adapter->flags & USING_MSI)  ? "MSI" : "");
-	}
-
-	/*
-	 * Return success!
-	 */
-	return 0;
-
-	/*
-	 * Error recovery and exit code.  Unwind state that's been created
-	 * so far and return the error.
-	 */
-
-err_free_debugfs:
-	if (!IS_ERR_OR_NULL(adapter->debugfs_root)) {
-		cleanup_debugfs(adapter);
-		debugfs_remove_recursive(adapter->debugfs_root);
-	}
-
-err_free_dev:
-	for_each_port(adapter, pidx) {
-		netdev = adapter->port[pidx];
-		if (netdev == NULL)
-			continue;
-		pi = netdev_priv(netdev);
-		t4vf_free_vi(adapter, pi->viid);
-		if (test_bit(pidx, &adapter->registered_device_map))
-			unregister_netdev(netdev);
-		free_netdev(netdev);
-	}
-
-err_unmap_bar:
-	iounmap(adapter->regs);
-
-err_free_adapter:
-	kfree(adapter);
-	pci_set_drvdata(pdev, NULL);
-
-err_release_regions:
-	pci_release_regions(pdev);
-	pci_set_drvdata(pdev, NULL);
-	pci_clear_master(pdev);
-
-err_disable_device:
-	pci_disable_device(pdev);
-
-	return err;
-}
-
-/*
- * "Remove" a device: tear down all kernel and driver state created in the
- * "probe" routine and quiesce the device (disable interrupts, etc.).  (Note
- * that this is called "remove_one" in the PF Driver.)
- */
-static void __devexit cxgb4vf_pci_remove(struct pci_dev *pdev)
-{
-	struct adapter *adapter = pci_get_drvdata(pdev);
-
-	/*
-	 * Tear down driver state associated with device.
-	 */
-	if (adapter) {
-		int pidx;
-
-		/*
-		 * Stop all of our activity.  Unregister network port,
-		 * disable interrupts, etc.
-		 */
-		for_each_port(adapter, pidx)
-			if (test_bit(pidx, &adapter->registered_device_map))
-				unregister_netdev(adapter->port[pidx]);
-		t4vf_sge_stop(adapter);
-		if (adapter->flags & USING_MSIX) {
-			pci_disable_msix(adapter->pdev);
-			adapter->flags &= ~USING_MSIX;
-		} else if (adapter->flags & USING_MSI) {
-			pci_disable_msi(adapter->pdev);
-			adapter->flags &= ~USING_MSI;
-		}
-
-		/*
-		 * Tear down our debugfs entries.
-		 */
-		if (!IS_ERR_OR_NULL(adapter->debugfs_root)) {
-			cleanup_debugfs(adapter);
-			debugfs_remove_recursive(adapter->debugfs_root);
-		}
-
-		/*
-		 * Free all of the various resources which we've acquired ...
-		 */
-		t4vf_free_sge_resources(adapter);
-		for_each_port(adapter, pidx) {
-			struct net_device *netdev = adapter->port[pidx];
-			struct port_info *pi;
-
-			if (netdev == NULL)
-				continue;
-
-			pi = netdev_priv(netdev);
-			t4vf_free_vi(adapter, pi->viid);
-			free_netdev(netdev);
-		}
-		iounmap(adapter->regs);
-		kfree(adapter);
-		pci_set_drvdata(pdev, NULL);
-	}
-
-	/*
-	 * Disable the device and release its PCI resources.
-	 */
-	pci_disable_device(pdev);
-	pci_clear_master(pdev);
-	pci_release_regions(pdev);
-}
-
-/*
- * "Shutdown" quiesce the device, stopping Ingress Packet and Interrupt
- * delivery.
- */
-static void __devexit cxgb4vf_pci_shutdown(struct pci_dev *pdev)
-{
-	struct adapter *adapter;
-	int pidx;
-
-	adapter = pci_get_drvdata(pdev);
-	if (!adapter)
-		return;
-
-	/*
-	 * Disable all Virtual Interfaces.  This will shut down the
-	 * delivery of all ingress packets into the chip for these
-	 * Virtual Interfaces.
-	 */
-	for_each_port(adapter, pidx) {
-		struct net_device *netdev;
-		struct port_info *pi;
-
-		if (!test_bit(pidx, &adapter->registered_device_map))
-			continue;
-
-		netdev = adapter->port[pidx];
-		if (!netdev)
-			continue;
-
-		pi = netdev_priv(netdev);
-		t4vf_enable_vi(adapter, pi->viid, false, false);
-	}
-
-	/*
-	 * Free up all Queues which will prevent further DMA and
-	 * Interrupts allowing various internal pathways to drain.
-	 */
-	t4vf_free_sge_resources(adapter);
-}
-
-/*
- * PCI Device registration data structures.
- */
-#define CH_DEVICE(devid, idx) \
-	{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, PCI_ANY_ID, 0, 0, idx }
-
-static struct pci_device_id cxgb4vf_pci_tbl[] = {
-	CH_DEVICE(0xb000, 0),	/* PE10K FPGA */
-	CH_DEVICE(0x4800, 0),	/* T440-dbg */
-	CH_DEVICE(0x4801, 0),	/* T420-cr */
-	CH_DEVICE(0x4802, 0),	/* T422-cr */
-	CH_DEVICE(0x4803, 0),	/* T440-cr */
-	CH_DEVICE(0x4804, 0),	/* T420-bch */
-	CH_DEVICE(0x4805, 0),   /* T440-bch */
-	CH_DEVICE(0x4806, 0),	/* T460-ch */
-	CH_DEVICE(0x4807, 0),	/* T420-so */
-	CH_DEVICE(0x4808, 0),	/* T420-cx */
-	CH_DEVICE(0x4809, 0),	/* T420-bt */
-	CH_DEVICE(0x480a, 0),   /* T404-bt */
-	{ 0, }
-};
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_AUTHOR("Chelsio Communications");
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION(DRV_VERSION);
-MODULE_DEVICE_TABLE(pci, cxgb4vf_pci_tbl);
-
-static struct pci_driver cxgb4vf_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= cxgb4vf_pci_tbl,
-	.probe		= cxgb4vf_pci_probe,
-	.remove		= __devexit_p(cxgb4vf_pci_remove),
-	.shutdown	= __devexit_p(cxgb4vf_pci_shutdown),
-};
-
-/*
- * Initialize global driver state.
- */
-static int __init cxgb4vf_module_init(void)
-{
-	int ret;
-
-	/*
-	 * Vet our module parameters.
-	 */
-	if (msi != MSI_MSIX && msi != MSI_MSI) {
-		printk(KERN_WARNING KBUILD_MODNAME
-		       ": bad module parameter msi=%d; must be %d"
-		       " (MSI-X or MSI) or %d (MSI)\n",
-		       msi, MSI_MSIX, MSI_MSI);
-		return -EINVAL;
-	}
-
-	/* Debugfs support is optional, just warn if this fails */
-	cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
-	if (IS_ERR_OR_NULL(cxgb4vf_debugfs_root))
-		printk(KERN_WARNING KBUILD_MODNAME ": could not create"
-		       " debugfs entry, continuing\n");
-
-	ret = pci_register_driver(&cxgb4vf_driver);
-	if (ret < 0 && !IS_ERR_OR_NULL(cxgb4vf_debugfs_root))
-		debugfs_remove(cxgb4vf_debugfs_root);
-	return ret;
-}
-
-/*
- * Tear down global driver state.
- */
-static void __exit cxgb4vf_module_exit(void)
-{
-	pci_unregister_driver(&cxgb4vf_driver);
-	debugfs_remove(cxgb4vf_debugfs_root);
-}
-
-module_init(cxgb4vf_module_init);
-module_exit(cxgb4vf_module_exit);
diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c
deleted file mode 100644
index cffb328c46c3..000000000000
--- a/drivers/net/cxgb4vf/sge.c
+++ /dev/null
@@ -1,2465 +0,0 @@
-/*
- * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
- * driver for Linux.
- *
- * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if_vlan.h>
-#include <linux/ip.h>
-#include <net/ipv6.h>
-#include <net/tcp.h>
-#include <linux/dma-mapping.h>
-#include <linux/prefetch.h>
-
-#include "t4vf_common.h"
-#include "t4vf_defs.h"
-
-#include "../cxgb4/t4_regs.h"
-#include "../cxgb4/t4fw_api.h"
-#include "../cxgb4/t4_msg.h"
-
-/*
- * Decoded Adapter Parameters.
- */
-static u32 FL_PG_ORDER;		/* large page allocation size */
-static u32 STAT_LEN;		/* length of status page at ring end */
-static u32 PKTSHIFT;		/* padding between CPL and packet data */
-static u32 FL_ALIGN;		/* response queue message alignment */
-
-/*
- * Constants ...
- */
-enum {
-	/*
-	 * Egress Queue sizes, producer and consumer indices are all in units
-	 * of Egress Context Units bytes.  Note that as far as the hardware is
-	 * concerned, the free list is an Egress Queue (the host produces free
-	 * buffers which the hardware consumes) and free list entries are
-	 * 64-bit PCI DMA addresses.
-	 */
-	EQ_UNIT = SGE_EQ_IDXSIZE,
-	FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
-	TXD_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
-
-	/*
-	 * Max number of TX descriptors we clean up at a time.  Should be
-	 * modest as freeing skbs isn't cheap and it happens while holding
-	 * locks.  We just need to free packets faster than they arrive, we
-	 * eventually catch up and keep the amortized cost reasonable.
-	 */
-	MAX_TX_RECLAIM = 16,
-
-	/*
-	 * Max number of Rx buffers we replenish at a time.  Again keep this
-	 * modest, allocating buffers isn't cheap either.
-	 */
-	MAX_RX_REFILL = 16,
-
-	/*
-	 * Period of the Rx queue check timer.  This timer is infrequent as it
-	 * has something to do only when the system experiences severe memory
-	 * shortage.
-	 */
-	RX_QCHECK_PERIOD = (HZ / 2),
-
-	/*
-	 * Period of the TX queue check timer and the maximum number of TX
-	 * descriptors to be reclaimed by the TX timer.
-	 */
-	TX_QCHECK_PERIOD = (HZ / 2),
-	MAX_TIMER_TX_RECLAIM = 100,
-
-	/*
-	 * An FL with <= FL_STARVE_THRES buffers is starving and a periodic
-	 * timer will attempt to refill it.
-	 */
-	FL_STARVE_THRES = 4,
-
-	/*
-	 * Suspend an Ethernet TX queue with fewer available descriptors than
-	 * this.  We always want to have room for a maximum sized packet:
-	 * inline immediate data + MAX_SKB_FRAGS. This is the same as
-	 * calc_tx_flits() for a TSO packet with nr_frags == MAX_SKB_FRAGS
-	 * (see that function and its helpers for a description of the
-	 * calculation).
-	 */
-	ETHTXQ_MAX_FRAGS = MAX_SKB_FRAGS + 1,
-	ETHTXQ_MAX_SGL_LEN = ((3 * (ETHTXQ_MAX_FRAGS-1))/2 +
-				   ((ETHTXQ_MAX_FRAGS-1) & 1) +
-				   2),
-	ETHTXQ_MAX_HDR = (sizeof(struct fw_eth_tx_pkt_vm_wr) +
-			  sizeof(struct cpl_tx_pkt_lso_core) +
-			  sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64),
-	ETHTXQ_MAX_FLITS = ETHTXQ_MAX_SGL_LEN + ETHTXQ_MAX_HDR,
-
-	ETHTXQ_STOP_THRES = 1 + DIV_ROUND_UP(ETHTXQ_MAX_FLITS, TXD_PER_EQ_UNIT),
-
-	/*
-	 * Max TX descriptor space we allow for an Ethernet packet to be
-	 * inlined into a WR.  This is limited by the maximum value which
-	 * we can specify for immediate data in the firmware Ethernet TX
-	 * Work Request.
-	 */
-	MAX_IMM_TX_PKT_LEN = FW_WR_IMMDLEN_MASK,
-
-	/*
-	 * Max size of a WR sent through a control TX queue.
-	 */
-	MAX_CTRL_WR_LEN = 256,
-
-	/*
-	 * Maximum amount of data which we'll ever need to inline into a
-	 * TX ring: max(MAX_IMM_TX_PKT_LEN, MAX_CTRL_WR_LEN).
-	 */
-	MAX_IMM_TX_LEN = (MAX_IMM_TX_PKT_LEN > MAX_CTRL_WR_LEN
-			  ? MAX_IMM_TX_PKT_LEN
-			  : MAX_CTRL_WR_LEN),
-
-	/*
-	 * For incoming packets less than RX_COPY_THRES, we copy the data into
-	 * an skb rather than referencing the data.  We allocate enough
-	 * in-line room in skb's to accommodate pulling in RX_PULL_LEN bytes
-	 * of the data (header).
-	 */
-	RX_COPY_THRES = 256,
-	RX_PULL_LEN = 128,
-
-	/*
-	 * Main body length for sk_buffs used for RX Ethernet packets with
-	 * fragments.  Should be >= RX_PULL_LEN but possibly bigger to give
-	 * pskb_may_pull() some room.
-	 */
-	RX_SKB_LEN = 512,
-};
-
-/*
- * Software state per TX descriptor.
- */
-struct tx_sw_desc {
-	struct sk_buff *skb;		/* socket buffer of TX data source */
-	struct ulptx_sgl *sgl;		/* scatter/gather list in TX Queue */
-};
-
-/*
- * Software state per RX Free List descriptor.  We keep track of the allocated
- * FL page, its size, and its PCI DMA address (if the page is mapped).  The FL
- * page size and its PCI DMA mapped state are stored in the low bits of the
- * PCI DMA address as per below.
- */
-struct rx_sw_desc {
-	struct page *page;		/* Free List page buffer */
-	dma_addr_t dma_addr;		/* PCI DMA address (if mapped) */
-					/*   and flags (see below) */
-};
-
-/*
- * The low bits of rx_sw_desc.dma_addr have special meaning.  Note that the
- * SGE also uses the low 4 bits to determine the size of the buffer.  It uses
- * those bits to index into the SGE_FL_BUFFER_SIZE[index] register array.
- * Since we only use SGE_FL_BUFFER_SIZE0 and SGE_FL_BUFFER_SIZE1, these low 4
- * bits can only contain a 0 or a 1 to indicate which size buffer we're giving
- * to the SGE.  Thus, our software state of "is the buffer mapped for DMA" is
- * maintained in an inverse sense so the hardware never sees that bit high.
- */
-enum {
-	RX_LARGE_BUF    = 1 << 0,	/* buffer is SGE_FL_BUFFER_SIZE[1] */
-	RX_UNMAPPED_BUF = 1 << 1,	/* buffer is not mapped */
-};
-
-/**
- *	get_buf_addr - return DMA buffer address of software descriptor
- *	@sdesc: pointer to the software buffer descriptor
- *
- *	Return the DMA buffer address of a software descriptor (stripping out
- *	our low-order flag bits).
- */
-static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *sdesc)
-{
-	return sdesc->dma_addr & ~(dma_addr_t)(RX_LARGE_BUF | RX_UNMAPPED_BUF);
-}
-
-/**
- *	is_buf_mapped - is buffer mapped for DMA?
- *	@sdesc: pointer to the software buffer descriptor
- *
- *	Determine whether the buffer associated with a software descriptor in
- *	mapped for DMA or not.
- */
-static inline bool is_buf_mapped(const struct rx_sw_desc *sdesc)
-{
-	return !(sdesc->dma_addr & RX_UNMAPPED_BUF);
-}
-
-/**
- *	need_skb_unmap - does the platform need unmapping of sk_buffs?
- *
- *	Returns true if the platform needs sk_buff unmapping.  The compiler
- *	optimizes away unnecessary code if this returns true.
- */
-static inline int need_skb_unmap(void)
-{
-#ifdef CONFIG_NEED_DMA_MAP_STATE
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-/**
- *	txq_avail - return the number of available slots in a TX queue
- *	@tq: the TX queue
- *
- *	Returns the number of available descriptors in a TX queue.
- */
-static inline unsigned int txq_avail(const struct sge_txq *tq)
-{
-	return tq->size - 1 - tq->in_use;
-}
-
-/**
- *	fl_cap - return the capacity of a Free List
- *	@fl: the Free List
- *
- *	Returns the capacity of a Free List.  The capacity is less than the
- *	size because an Egress Queue Index Unit worth of descriptors needs to
- *	be left unpopulated, otherwise the Producer and Consumer indices PIDX
- *	and CIDX will match and the hardware will think the FL is empty.
- */
-static inline unsigned int fl_cap(const struct sge_fl *fl)
-{
-	return fl->size - FL_PER_EQ_UNIT;
-}
-
-/**
- *	fl_starving - return whether a Free List is starving.
- *	@fl: the Free List
- *
- *	Tests specified Free List to see whether the number of buffers
- *	available to the hardware has falled below our "starvation"
- *	threshold.
- */
-static inline bool fl_starving(const struct sge_fl *fl)
-{
-	return fl->avail - fl->pend_cred <= FL_STARVE_THRES;
-}
-
-/**
- *	map_skb -  map an skb for DMA to the device
- *	@dev: the egress net device
- *	@skb: the packet to map
- *	@addr: a pointer to the base of the DMA mapping array
- *
- *	Map an skb for DMA to the device and return an array of DMA addresses.
- */
-static int map_skb(struct device *dev, const struct sk_buff *skb,
-		   dma_addr_t *addr)
-{
-	const skb_frag_t *fp, *end;
-	const struct skb_shared_info *si;
-
-	*addr = dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, *addr))
-		goto out_err;
-
-	si = skb_shinfo(skb);
-	end = &si->frags[si->nr_frags];
-	for (fp = si->frags; fp < end; fp++) {
-		*++addr = dma_map_page(dev, fp->page, fp->page_offset, fp->size,
-				       DMA_TO_DEVICE);
-		if (dma_mapping_error(dev, *addr))
-			goto unwind;
-	}
-	return 0;
-
-unwind:
-	while (fp-- > si->frags)
-		dma_unmap_page(dev, *--addr, fp->size, DMA_TO_DEVICE);
-	dma_unmap_single(dev, addr[-1], skb_headlen(skb), DMA_TO_DEVICE);
-
-out_err:
-	return -ENOMEM;
-}
-
-static void unmap_sgl(struct device *dev, const struct sk_buff *skb,
-		      const struct ulptx_sgl *sgl, const struct sge_txq *tq)
-{
-	const struct ulptx_sge_pair *p;
-	unsigned int nfrags = skb_shinfo(skb)->nr_frags;
-
-	if (likely(skb_headlen(skb)))
-		dma_unmap_single(dev, be64_to_cpu(sgl->addr0),
-				 be32_to_cpu(sgl->len0), DMA_TO_DEVICE);
-	else {
-		dma_unmap_page(dev, be64_to_cpu(sgl->addr0),
-			       be32_to_cpu(sgl->len0), DMA_TO_DEVICE);
-		nfrags--;
-	}
-
-	/*
-	 * the complexity below is because of the possibility of a wrap-around
-	 * in the middle of an SGL
-	 */
-	for (p = sgl->sge; nfrags >= 2; nfrags -= 2) {
-		if (likely((u8 *)(p + 1) <= (u8 *)tq->stat)) {
-unmap:
-			dma_unmap_page(dev, be64_to_cpu(p->addr[0]),
-				       be32_to_cpu(p->len[0]), DMA_TO_DEVICE);
-			dma_unmap_page(dev, be64_to_cpu(p->addr[1]),
-				       be32_to_cpu(p->len[1]), DMA_TO_DEVICE);
-			p++;
-		} else if ((u8 *)p == (u8 *)tq->stat) {
-			p = (const struct ulptx_sge_pair *)tq->desc;
-			goto unmap;
-		} else if ((u8 *)p + 8 == (u8 *)tq->stat) {
-			const __be64 *addr = (const __be64 *)tq->desc;
-
-			dma_unmap_page(dev, be64_to_cpu(addr[0]),
-				       be32_to_cpu(p->len[0]), DMA_TO_DEVICE);
-			dma_unmap_page(dev, be64_to_cpu(addr[1]),
-				       be32_to_cpu(p->len[1]), DMA_TO_DEVICE);
-			p = (const struct ulptx_sge_pair *)&addr[2];
-		} else {
-			const __be64 *addr = (const __be64 *)tq->desc;
-
-			dma_unmap_page(dev, be64_to_cpu(p->addr[0]),
-				       be32_to_cpu(p->len[0]), DMA_TO_DEVICE);
-			dma_unmap_page(dev, be64_to_cpu(addr[0]),
-				       be32_to_cpu(p->len[1]), DMA_TO_DEVICE);
-			p = (const struct ulptx_sge_pair *)&addr[1];
-		}
-	}
-	if (nfrags) {
-		__be64 addr;
-
-		if ((u8 *)p == (u8 *)tq->stat)
-			p = (const struct ulptx_sge_pair *)tq->desc;
-		addr = ((u8 *)p + 16 <= (u8 *)tq->stat
-			? p->addr[0]
-			: *(const __be64 *)tq->desc);
-		dma_unmap_page(dev, be64_to_cpu(addr), be32_to_cpu(p->len[0]),
-			       DMA_TO_DEVICE);
-	}
-}
-
-/**
- *	free_tx_desc - reclaims TX descriptors and their buffers
- *	@adapter: the adapter
- *	@tq: the TX queue to reclaim descriptors from
- *	@n: the number of descriptors to reclaim
- *	@unmap: whether the buffers should be unmapped for DMA
- *
- *	Reclaims TX descriptors from an SGE TX queue and frees the associated
- *	TX buffers.  Called with the TX queue lock held.
- */
-static void free_tx_desc(struct adapter *adapter, struct sge_txq *tq,
-			 unsigned int n, bool unmap)
-{
-	struct tx_sw_desc *sdesc;
-	unsigned int cidx = tq->cidx;
-	struct device *dev = adapter->pdev_dev;
-
-	const int need_unmap = need_skb_unmap() && unmap;
-
-	sdesc = &tq->sdesc[cidx];
-	while (n--) {
-		/*
-		 * If we kept a reference to the original TX skb, we need to
-		 * unmap it from PCI DMA space (if required) and free it.
-		 */
-		if (sdesc->skb) {
-			if (need_unmap)
-				unmap_sgl(dev, sdesc->skb, sdesc->sgl, tq);
-			kfree_skb(sdesc->skb);
-			sdesc->skb = NULL;
-		}
-
-		sdesc++;
-		if (++cidx == tq->size) {
-			cidx = 0;
-			sdesc = tq->sdesc;
-		}
-	}
-	tq->cidx = cidx;
-}
-
-/*
- * Return the number of reclaimable descriptors in a TX queue.
- */
-static inline int reclaimable(const struct sge_txq *tq)
-{
-	int hw_cidx = be16_to_cpu(tq->stat->cidx);
-	int reclaimable = hw_cidx - tq->cidx;
-	if (reclaimable < 0)
-		reclaimable += tq->size;
-	return reclaimable;
-}
-
-/**
- *	reclaim_completed_tx - reclaims completed TX descriptors
- *	@adapter: the adapter
- *	@tq: the TX queue to reclaim completed descriptors from
- *	@unmap: whether the buffers should be unmapped for DMA
- *
- *	Reclaims TX descriptors that the SGE has indicated it has processed,
- *	and frees the associated buffers if possible.  Called with the TX
- *	queue locked.
- */
-static inline void reclaim_completed_tx(struct adapter *adapter,
-					struct sge_txq *tq,
-					bool unmap)
-{
-	int avail = reclaimable(tq);
-
-	if (avail) {
-		/*
-		 * Limit the amount of clean up work we do at a time to keep
-		 * the TX lock hold time O(1).
-		 */
-		if (avail > MAX_TX_RECLAIM)
-			avail = MAX_TX_RECLAIM;
-
-		free_tx_desc(adapter, tq, avail, unmap);
-		tq->in_use -= avail;
-	}
-}
-
-/**
- *	get_buf_size - return the size of an RX Free List buffer.
- *	@sdesc: pointer to the software buffer descriptor
- */
-static inline int get_buf_size(const struct rx_sw_desc *sdesc)
-{
-	return FL_PG_ORDER > 0 && (sdesc->dma_addr & RX_LARGE_BUF)
-		? (PAGE_SIZE << FL_PG_ORDER)
-		: PAGE_SIZE;
-}
-
-/**
- *	free_rx_bufs - free RX buffers on an SGE Free List
- *	@adapter: the adapter
- *	@fl: the SGE Free List to free buffers from
- *	@n: how many buffers to free
- *
- *	Release the next @n buffers on an SGE Free List RX queue.   The
- *	buffers must be made inaccessible to hardware before calling this
- *	function.
- */
-static void free_rx_bufs(struct adapter *adapter, struct sge_fl *fl, int n)
-{
-	while (n--) {
-		struct rx_sw_desc *sdesc = &fl->sdesc[fl->cidx];
-
-		if (is_buf_mapped(sdesc))
-			dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc),
-				       get_buf_size(sdesc), PCI_DMA_FROMDEVICE);
-		put_page(sdesc->page);
-		sdesc->page = NULL;
-		if (++fl->cidx == fl->size)
-			fl->cidx = 0;
-		fl->avail--;
-	}
-}
-
-/**
- *	unmap_rx_buf - unmap the current RX buffer on an SGE Free List
- *	@adapter: the adapter
- *	@fl: the SGE Free List
- *
- *	Unmap the current buffer on an SGE Free List RX queue.   The
- *	buffer must be made inaccessible to HW before calling this function.
- *
- *	This is similar to @free_rx_bufs above but does not free the buffer.
- *	Do note that the FL still loses any further access to the buffer.
- *	This is used predominantly to "transfer ownership" of an FL buffer
- *	to another entity (typically an skb's fragment list).
- */
-static void unmap_rx_buf(struct adapter *adapter, struct sge_fl *fl)
-{
-	struct rx_sw_desc *sdesc = &fl->sdesc[fl->cidx];
-
-	if (is_buf_mapped(sdesc))
-		dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc),
-			       get_buf_size(sdesc), PCI_DMA_FROMDEVICE);
-	sdesc->page = NULL;
-	if (++fl->cidx == fl->size)
-		fl->cidx = 0;
-	fl->avail--;
-}
-
-/**
- *	ring_fl_db - righ doorbell on free list
- *	@adapter: the adapter
- *	@fl: the Free List whose doorbell should be rung ...
- *
- *	Tell the Scatter Gather Engine that there are new free list entries
- *	available.
- */
-static inline void ring_fl_db(struct adapter *adapter, struct sge_fl *fl)
-{
-	/*
-	 * The SGE keeps track of its Producer and Consumer Indices in terms
-	 * of Egress Queue Units so we can only tell it about integral numbers
-	 * of multiples of Free List Entries per Egress Queue Units ...
-	 */
-	if (fl->pend_cred >= FL_PER_EQ_UNIT) {
-		wmb();
-		t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_KDOORBELL,
-			     DBPRIO |
-			     QID(fl->cntxt_id) |
-			     PIDX(fl->pend_cred / FL_PER_EQ_UNIT));
-		fl->pend_cred %= FL_PER_EQ_UNIT;
-	}
-}
-
-/**
- *	set_rx_sw_desc - initialize software RX buffer descriptor
- *	@sdesc: pointer to the softwore RX buffer descriptor
- *	@page: pointer to the page data structure backing the RX buffer
- *	@dma_addr: PCI DMA address (possibly with low-bit flags)
- */
-static inline void set_rx_sw_desc(struct rx_sw_desc *sdesc, struct page *page,
-				  dma_addr_t dma_addr)
-{
-	sdesc->page = page;
-	sdesc->dma_addr = dma_addr;
-}
-
-/*
- * Support for poisoning RX buffers ...
- */
-#define POISON_BUF_VAL -1
-
-static inline void poison_buf(struct page *page, size_t sz)
-{
-#if POISON_BUF_VAL >= 0
-	memset(page_address(page), POISON_BUF_VAL, sz);
-#endif
-}
-
-/**
- *	refill_fl - refill an SGE RX buffer ring
- *	@adapter: the adapter
- *	@fl: the Free List ring to refill
- *	@n: the number of new buffers to allocate
- *	@gfp: the gfp flags for the allocations
- *
- *	(Re)populate an SGE free-buffer queue with up to @n new packet buffers,
- *	allocated with the supplied gfp flags.  The caller must assure that
- *	@n does not exceed the queue's capacity -- i.e. (cidx == pidx) _IN
- *	EGRESS QUEUE UNITS_ indicates an empty Free List!  Returns the number
- *	of buffers allocated.  If afterwards the queue is found critically low,
- *	mark it as starving in the bitmap of starving FLs.
- */
-static unsigned int refill_fl(struct adapter *adapter, struct sge_fl *fl,
-			      int n, gfp_t gfp)
-{
-	struct page *page;
-	dma_addr_t dma_addr;
-	unsigned int cred = fl->avail;
-	__be64 *d = &fl->desc[fl->pidx];
-	struct rx_sw_desc *sdesc = &fl->sdesc[fl->pidx];
-
-	/*
-	 * Sanity: ensure that the result of adding n Free List buffers
-	 * won't result in wrapping the SGE's Producer Index around to
-	 * it's Consumer Index thereby indicating an empty Free List ...
-	 */
-	BUG_ON(fl->avail + n > fl->size - FL_PER_EQ_UNIT);
-
-	/*
-	 * If we support large pages, prefer large buffers and fail over to
-	 * small pages if we can't allocate large pages to satisfy the refill.
-	 * If we don't support large pages, drop directly into the small page
-	 * allocation code.
-	 */
-	if (FL_PG_ORDER == 0)
-		goto alloc_small_pages;
-
-	while (n) {
-		page = alloc_pages(gfp | __GFP_COMP | __GFP_NOWARN,
-				   FL_PG_ORDER);
-		if (unlikely(!page)) {
-			/*
-			 * We've failed inour attempt to allocate a "large
-			 * page".  Fail over to the "small page" allocation
-			 * below.
-			 */
-			fl->large_alloc_failed++;
-			break;
-		}
-		poison_buf(page, PAGE_SIZE << FL_PG_ORDER);
-
-		dma_addr = dma_map_page(adapter->pdev_dev, page, 0,
-					PAGE_SIZE << FL_PG_ORDER,
-					PCI_DMA_FROMDEVICE);
-		if (unlikely(dma_mapping_error(adapter->pdev_dev, dma_addr))) {
-			/*
-			 * We've run out of DMA mapping space.  Free up the
-			 * buffer and return with what we've managed to put
-			 * into the free list.  We don't want to fail over to
-			 * the small page allocation below in this case
-			 * because DMA mapping resources are typically
-			 * critical resources once they become scarse.
-			 */
-			__free_pages(page, FL_PG_ORDER);
-			goto out;
-		}
-		dma_addr |= RX_LARGE_BUF;
-		*d++ = cpu_to_be64(dma_addr);
-
-		set_rx_sw_desc(sdesc, page, dma_addr);
-		sdesc++;
-
-		fl->avail++;
-		if (++fl->pidx == fl->size) {
-			fl->pidx = 0;
-			sdesc = fl->sdesc;
-			d = fl->desc;
-		}
-		n--;
-	}
-
-alloc_small_pages:
-	while (n--) {
-		page = __netdev_alloc_page(adapter->port[0],
-					   gfp | __GFP_NOWARN);
-		if (unlikely(!page)) {
-			fl->alloc_failed++;
-			break;
-		}
-		poison_buf(page, PAGE_SIZE);
-
-		dma_addr = dma_map_page(adapter->pdev_dev, page, 0, PAGE_SIZE,
-				       PCI_DMA_FROMDEVICE);
-		if (unlikely(dma_mapping_error(adapter->pdev_dev, dma_addr))) {
-			netdev_free_page(adapter->port[0], page);
-			break;
-		}
-		*d++ = cpu_to_be64(dma_addr);
-
-		set_rx_sw_desc(sdesc, page, dma_addr);
-		sdesc++;
-
-		fl->avail++;
-		if (++fl->pidx == fl->size) {
-			fl->pidx = 0;
-			sdesc = fl->sdesc;
-			d = fl->desc;
-		}
-	}
-
-out:
-	/*
-	 * Update our accounting state to incorporate the new Free List
-	 * buffers, tell the hardware about them and return the number of
-	 * bufers which we were able to allocate.
-	 */
-	cred = fl->avail - cred;
-	fl->pend_cred += cred;
-	ring_fl_db(adapter, fl);
-
-	if (unlikely(fl_starving(fl))) {
-		smp_wmb();
-		set_bit(fl->cntxt_id, adapter->sge.starving_fl);
-	}
-
-	return cred;
-}
-
-/*
- * Refill a Free List to its capacity or the Maximum Refill Increment,
- * whichever is smaller ...
- */
-static inline void __refill_fl(struct adapter *adapter, struct sge_fl *fl)
-{
-	refill_fl(adapter, fl,
-		  min((unsigned int)MAX_RX_REFILL, fl_cap(fl) - fl->avail),
-		  GFP_ATOMIC);
-}
-
-/**
- *	alloc_ring - allocate resources for an SGE descriptor ring
- *	@dev: the PCI device's core device
- *	@nelem: the number of descriptors
- *	@hwsize: the size of each hardware descriptor
- *	@swsize: the size of each software descriptor
- *	@busaddrp: the physical PCI bus address of the allocated ring
- *	@swringp: return address pointer for software ring
- *	@stat_size: extra space in hardware ring for status information
- *
- *	Allocates resources for an SGE descriptor ring, such as TX queues,
- *	free buffer lists, response queues, etc.  Each SGE ring requires
- *	space for its hardware descriptors plus, optionally, space for software
- *	state associated with each hardware entry (the metadata).  The function
- *	returns three values: the virtual address for the hardware ring (the
- *	return value of the function), the PCI bus address of the hardware
- *	ring (in *busaddrp), and the address of the software ring (in swringp).
- *	Both the hardware and software rings are returned zeroed out.
- */
-static void *alloc_ring(struct device *dev, size_t nelem, size_t hwsize,
-			size_t swsize, dma_addr_t *busaddrp, void *swringp,
-			size_t stat_size)
-{
-	/*
-	 * Allocate the hardware ring and PCI DMA bus address space for said.
-	 */
-	size_t hwlen = nelem * hwsize + stat_size;
-	void *hwring = dma_alloc_coherent(dev, hwlen, busaddrp, GFP_KERNEL);
-
-	if (!hwring)
-		return NULL;
-
-	/*
-	 * If the caller wants a software ring, allocate it and return a
-	 * pointer to it in *swringp.
-	 */
-	BUG_ON((swsize != 0) != (swringp != NULL));
-	if (swsize) {
-		void *swring = kcalloc(nelem, swsize, GFP_KERNEL);
-
-		if (!swring) {
-			dma_free_coherent(dev, hwlen, hwring, *busaddrp);
-			return NULL;
-		}
-		*(void **)swringp = swring;
-	}
-
-	/*
-	 * Zero out the hardware ring and return its address as our function
-	 * value.
-	 */
-	memset(hwring, 0, hwlen);
-	return hwring;
-}
-
-/**
- *	sgl_len - calculates the size of an SGL of the given capacity
- *	@n: the number of SGL entries
- *
- *	Calculates the number of flits (8-byte units) needed for a Direct
- *	Scatter/Gather List that can hold the given number of entries.
- */
-static inline unsigned int sgl_len(unsigned int n)
-{
-	/*
-	 * A Direct Scatter Gather List uses 32-bit lengths and 64-bit PCI DMA
-	 * addresses.  The DSGL Work Request starts off with a 32-bit DSGL
-	 * ULPTX header, then Length0, then Address0, then, for 1 <= i <= N,
-	 * repeated sequences of { Length[i], Length[i+1], Address[i],
-	 * Address[i+1] } (this ensures that all addresses are on 64-bit
-	 * boundaries).  If N is even, then Length[N+1] should be set to 0 and
-	 * Address[N+1] is omitted.
-	 *
-	 * The following calculation incorporates all of the above.  It's
-	 * somewhat hard to follow but, briefly: the "+2" accounts for the
-	 * first two flits which include the DSGL header, Length0 and
-	 * Address0; the "(3*(n-1))/2" covers the main body of list entries (3
-	 * flits for every pair of the remaining N) +1 if (n-1) is odd; and
-	 * finally the "+((n-1)&1)" adds the one remaining flit needed if
-	 * (n-1) is odd ...
-	 */
-	n--;
-	return (3 * n) / 2 + (n & 1) + 2;
-}
-
-/**
- *	flits_to_desc - returns the num of TX descriptors for the given flits
- *	@flits: the number of flits
- *
- *	Returns the number of TX descriptors needed for the supplied number
- *	of flits.
- */
-static inline unsigned int flits_to_desc(unsigned int flits)
-{
-	BUG_ON(flits > SGE_MAX_WR_LEN / sizeof(__be64));
-	return DIV_ROUND_UP(flits, TXD_PER_EQ_UNIT);
-}
-
-/**
- *	is_eth_imm - can an Ethernet packet be sent as immediate data?
- *	@skb: the packet
- *
- *	Returns whether an Ethernet packet is small enough to fit completely as
- *	immediate data.
- */
-static inline int is_eth_imm(const struct sk_buff *skb)
-{
-	/*
-	 * The VF Driver uses the FW_ETH_TX_PKT_VM_WR firmware Work Request
-	 * which does not accommodate immediate data.  We could dike out all
-	 * of the support code for immediate data but that would tie our hands
-	 * too much if we ever want to enhace the firmware.  It would also
-	 * create more differences between the PF and VF Drivers.
-	 */
-	return false;
-}
-
-/**
- *	calc_tx_flits - calculate the number of flits for a packet TX WR
- *	@skb: the packet
- *
- *	Returns the number of flits needed for a TX Work Request for the
- *	given Ethernet packet, including the needed WR and CPL headers.
- */
-static inline unsigned int calc_tx_flits(const struct sk_buff *skb)
-{
-	unsigned int flits;
-
-	/*
-	 * If the skb is small enough, we can pump it out as a work request
-	 * with only immediate data.  In that case we just have to have the
-	 * TX Packet header plus the skb data in the Work Request.
-	 */
-	if (is_eth_imm(skb))
-		return DIV_ROUND_UP(skb->len + sizeof(struct cpl_tx_pkt),
-				    sizeof(__be64));
-
-	/*
-	 * Otherwise, we're going to have to construct a Scatter gather list
-	 * of the skb body and fragments.  We also include the flits necessary
-	 * for the TX Packet Work Request and CPL.  We always have a firmware
-	 * Write Header (incorporated as part of the cpl_tx_pkt_lso and
-	 * cpl_tx_pkt structures), followed by either a TX Packet Write CPL
-	 * message or, if we're doing a Large Send Offload, an LSO CPL message
-	 * with an embeded TX Packet Write CPL message.
-	 */
-	flits = sgl_len(skb_shinfo(skb)->nr_frags + 1);
-	if (skb_shinfo(skb)->gso_size)
-		flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) +
-			  sizeof(struct cpl_tx_pkt_lso_core) +
-			  sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
-	else
-		flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) +
-			  sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
-	return flits;
-}
-
-/**
- *	write_sgl - populate a Scatter/Gather List for a packet
- *	@skb: the packet
- *	@tq: the TX queue we are writing into
- *	@sgl: starting location for writing the SGL
- *	@end: points right after the end of the SGL
- *	@start: start offset into skb main-body data to include in the SGL
- *	@addr: the list of DMA bus addresses for the SGL elements
- *
- *	Generates a Scatter/Gather List for the buffers that make up a packet.
- *	The caller must provide adequate space for the SGL that will be written.
- *	The SGL includes all of the packet's page fragments and the data in its
- *	main body except for the first @start bytes.  @pos must be 16-byte
- *	aligned and within a TX descriptor with available space.  @end points
- *	write after the end of the SGL but does not account for any potential
- *	wrap around, i.e., @end > @tq->stat.
- */
-static void write_sgl(const struct sk_buff *skb, struct sge_txq *tq,
-		      struct ulptx_sgl *sgl, u64 *end, unsigned int start,
-		      const dma_addr_t *addr)
-{
-	unsigned int i, len;
-	struct ulptx_sge_pair *to;
-	const struct skb_shared_info *si = skb_shinfo(skb);
-	unsigned int nfrags = si->nr_frags;
-	struct ulptx_sge_pair buf[MAX_SKB_FRAGS / 2 + 1];
-
-	len = skb_headlen(skb) - start;
-	if (likely(len)) {
-		sgl->len0 = htonl(len);
-		sgl->addr0 = cpu_to_be64(addr[0] + start);
-		nfrags++;
-	} else {
-		sgl->len0 = htonl(si->frags[0].size);
-		sgl->addr0 = cpu_to_be64(addr[1]);
-	}
-
-	sgl->cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) |
-			      ULPTX_NSGE(nfrags));
-	if (likely(--nfrags == 0))
-		return;
-	/*
-	 * Most of the complexity below deals with the possibility we hit the
-	 * end of the queue in the middle of writing the SGL.  For this case
-	 * only we create the SGL in a temporary buffer and then copy it.
-	 */
-	to = (u8 *)end > (u8 *)tq->stat ? buf : sgl->sge;
-
-	for (i = (nfrags != si->nr_frags); nfrags >= 2; nfrags -= 2, to++) {
-		to->len[0] = cpu_to_be32(si->frags[i].size);
-		to->len[1] = cpu_to_be32(si->frags[++i].size);
-		to->addr[0] = cpu_to_be64(addr[i]);
-		to->addr[1] = cpu_to_be64(addr[++i]);
-	}
-	if (nfrags) {
-		to->len[0] = cpu_to_be32(si->frags[i].size);
-		to->len[1] = cpu_to_be32(0);
-		to->addr[0] = cpu_to_be64(addr[i + 1]);
-	}
-	if (unlikely((u8 *)end > (u8 *)tq->stat)) {
-		unsigned int part0 = (u8 *)tq->stat - (u8 *)sgl->sge, part1;
-
-		if (likely(part0))
-			memcpy(sgl->sge, buf, part0);
-		part1 = (u8 *)end - (u8 *)tq->stat;
-		memcpy(tq->desc, (u8 *)buf + part0, part1);
-		end = (void *)tq->desc + part1;
-	}
-	if ((uintptr_t)end & 8)           /* 0-pad to multiple of 16 */
-		*(u64 *)end = 0;
-}
-
-/**
- *	check_ring_tx_db - check and potentially ring a TX queue's doorbell
- *	@adapter: the adapter
- *	@tq: the TX queue
- *	@n: number of new descriptors to give to HW
- *
- *	Ring the doorbel for a TX queue.
- */
-static inline void ring_tx_db(struct adapter *adapter, struct sge_txq *tq,
-			      int n)
-{
-	/*
-	 * Warn if we write doorbells with the wrong priority and write
-	 * descriptors before telling HW.
-	 */
-	WARN_ON((QID(tq->cntxt_id) | PIDX(n)) & DBPRIO);
-	wmb();
-	t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_KDOORBELL,
-		     QID(tq->cntxt_id) | PIDX(n));
-}
-
-/**
- *	inline_tx_skb - inline a packet's data into TX descriptors
- *	@skb: the packet
- *	@tq: the TX queue where the packet will be inlined
- *	@pos: starting position in the TX queue to inline the packet
- *
- *	Inline a packet's contents directly into TX descriptors, starting at
- *	the given position within the TX DMA ring.
- *	Most of the complexity of this operation is dealing with wrap arounds
- *	in the middle of the packet we want to inline.
- */
-static void inline_tx_skb(const struct sk_buff *skb, const struct sge_txq *tq,
-			  void *pos)
-{
-	u64 *p;
-	int left = (void *)tq->stat - pos;
-
-	if (likely(skb->len <= left)) {
-		if (likely(!skb->data_len))
-			skb_copy_from_linear_data(skb, pos, skb->len);
-		else
-			skb_copy_bits(skb, 0, pos, skb->len);
-		pos += skb->len;
-	} else {
-		skb_copy_bits(skb, 0, pos, left);
-		skb_copy_bits(skb, left, tq->desc, skb->len - left);
-		pos = (void *)tq->desc + (skb->len - left);
-	}
-
-	/* 0-pad to multiple of 16 */
-	p = PTR_ALIGN(pos, 8);
-	if ((uintptr_t)p & 8)
-		*p = 0;
-}
-
-/*
- * Figure out what HW csum a packet wants and return the appropriate control
- * bits.
- */
-static u64 hwcsum(const struct sk_buff *skb)
-{
-	int csum_type;
-	const struct iphdr *iph = ip_hdr(skb);
-
-	if (iph->version == 4) {
-		if (iph->protocol == IPPROTO_TCP)
-			csum_type = TX_CSUM_TCPIP;
-		else if (iph->protocol == IPPROTO_UDP)
-			csum_type = TX_CSUM_UDPIP;
-		else {
-nocsum:
-			/*
-			 * unknown protocol, disable HW csum
-			 * and hope a bad packet is detected
-			 */
-			return TXPKT_L4CSUM_DIS;
-		}
-	} else {
-		/*
-		 * this doesn't work with extension headers
-		 */
-		const struct ipv6hdr *ip6h = (const struct ipv6hdr *)iph;
-
-		if (ip6h->nexthdr == IPPROTO_TCP)
-			csum_type = TX_CSUM_TCPIP6;
-		else if (ip6h->nexthdr == IPPROTO_UDP)
-			csum_type = TX_CSUM_UDPIP6;
-		else
-			goto nocsum;
-	}
-
-	if (likely(csum_type >= TX_CSUM_TCPIP))
-		return TXPKT_CSUM_TYPE(csum_type) |
-			TXPKT_IPHDR_LEN(skb_network_header_len(skb)) |
-			TXPKT_ETHHDR_LEN(skb_network_offset(skb) - ETH_HLEN);
-	else {
-		int start = skb_transport_offset(skb);
-
-		return TXPKT_CSUM_TYPE(csum_type) |
-			TXPKT_CSUM_START(start) |
-			TXPKT_CSUM_LOC(start + skb->csum_offset);
-	}
-}
-
-/*
- * Stop an Ethernet TX queue and record that state change.
- */
-static void txq_stop(struct sge_eth_txq *txq)
-{
-	netif_tx_stop_queue(txq->txq);
-	txq->q.stops++;
-}
-
-/*
- * Advance our software state for a TX queue by adding n in use descriptors.
- */
-static inline void txq_advance(struct sge_txq *tq, unsigned int n)
-{
-	tq->in_use += n;
-	tq->pidx += n;
-	if (tq->pidx >= tq->size)
-		tq->pidx -= tq->size;
-}
-
-/**
- *	t4vf_eth_xmit - add a packet to an Ethernet TX queue
- *	@skb: the packet
- *	@dev: the egress net device
- *
- *	Add a packet to an SGE Ethernet TX queue.  Runs with softirqs disabled.
- */
-int t4vf_eth_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	u32 wr_mid;
-	u64 cntrl, *end;
-	int qidx, credits;
-	unsigned int flits, ndesc;
-	struct adapter *adapter;
-	struct sge_eth_txq *txq;
-	const struct port_info *pi;
-	struct fw_eth_tx_pkt_vm_wr *wr;
-	struct cpl_tx_pkt_core *cpl;
-	const struct skb_shared_info *ssi;
-	dma_addr_t addr[MAX_SKB_FRAGS + 1];
-	const size_t fw_hdr_copy_len = (sizeof(wr->ethmacdst) +
-					sizeof(wr->ethmacsrc) +
-					sizeof(wr->ethtype) +
-					sizeof(wr->vlantci));
-
-	/*
-	 * The chip minimum packet length is 10 octets but the firmware
-	 * command that we are using requires that we copy the Ethernet header
-	 * (including the VLAN tag) into the header so we reject anything
-	 * smaller than that ...
-	 */
-	if (unlikely(skb->len < fw_hdr_copy_len))
-		goto out_free;
-
-	/*
-	 * Figure out which TX Queue we're going to use.
-	 */
-	pi = netdev_priv(dev);
-	adapter = pi->adapter;
-	qidx = skb_get_queue_mapping(skb);
-	BUG_ON(qidx >= pi->nqsets);
-	txq = &adapter->sge.ethtxq[pi->first_qset + qidx];
-
-	/*
-	 * Take this opportunity to reclaim any TX Descriptors whose DMA
-	 * transfers have completed.
-	 */
-	reclaim_completed_tx(adapter, &txq->q, true);
-
-	/*
-	 * Calculate the number of flits and TX Descriptors we're going to
-	 * need along with how many TX Descriptors will be left over after
-	 * we inject our Work Request.
-	 */
-	flits = calc_tx_flits(skb);
-	ndesc = flits_to_desc(flits);
-	credits = txq_avail(&txq->q) - ndesc;
-
-	if (unlikely(credits < 0)) {
-		/*
-		 * Not enough room for this packet's Work Request.  Stop the
-		 * TX Queue and return a "busy" condition.  The queue will get
-		 * started later on when the firmware informs us that space
-		 * has opened up.
-		 */
-		txq_stop(txq);
-		dev_err(adapter->pdev_dev,
-			"%s: TX ring %u full while queue awake!\n",
-			dev->name, qidx);
-		return NETDEV_TX_BUSY;
-	}
-
-	if (!is_eth_imm(skb) &&
-	    unlikely(map_skb(adapter->pdev_dev, skb, addr) < 0)) {
-		/*
-		 * We need to map the skb into PCI DMA space (because it can't
-		 * be in-lined directly into the Work Request) and the mapping
-		 * operation failed.  Record the error and drop the packet.
-		 */
-		txq->mapping_err++;
-		goto out_free;
-	}
-
-	wr_mid = FW_WR_LEN16(DIV_ROUND_UP(flits, 2));
-	if (unlikely(credits < ETHTXQ_STOP_THRES)) {
-		/*
-		 * After we're done injecting the Work Request for this
-		 * packet, we'll be below our "stop threshold" so stop the TX
-		 * Queue now and schedule a request for an SGE Egress Queue
-		 * Update message.  The queue will get started later on when
-		 * the firmware processes this Work Request and sends us an
-		 * Egress Queue Status Update message indicating that space
-		 * has opened up.
-		 */
-		txq_stop(txq);
-		wr_mid |= FW_WR_EQUEQ | FW_WR_EQUIQ;
-	}
-
-	/*
-	 * Start filling in our Work Request.  Note that we do _not_ handle
-	 * the WR Header wrapping around the TX Descriptor Ring.  If our
-	 * maximum header size ever exceeds one TX Descriptor, we'll need to
-	 * do something else here.
-	 */
-	BUG_ON(DIV_ROUND_UP(ETHTXQ_MAX_HDR, TXD_PER_EQ_UNIT) > 1);
-	wr = (void *)&txq->q.desc[txq->q.pidx];
-	wr->equiq_to_len16 = cpu_to_be32(wr_mid);
-	wr->r3[0] = cpu_to_be64(0);
-	wr->r3[1] = cpu_to_be64(0);
-	skb_copy_from_linear_data(skb, (void *)wr->ethmacdst, fw_hdr_copy_len);
-	end = (u64 *)wr + flits;
-
-	/*
-	 * If this is a Large Send Offload packet we'll put in an LSO CPL
-	 * message with an encapsulated TX Packet CPL message.  Otherwise we
-	 * just use a TX Packet CPL message.
-	 */
-	ssi = skb_shinfo(skb);
-	if (ssi->gso_size) {
-		struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
-		bool v6 = (ssi->gso_type & SKB_GSO_TCPV6) != 0;
-		int l3hdr_len = skb_network_header_len(skb);
-		int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN;
-
-		wr->op_immdlen =
-			cpu_to_be32(FW_WR_OP(FW_ETH_TX_PKT_VM_WR) |
-				    FW_WR_IMMDLEN(sizeof(*lso) +
-						  sizeof(*cpl)));
-		/*
-		 * Fill in the LSO CPL message.
-		 */
-		lso->lso_ctrl =
-			cpu_to_be32(LSO_OPCODE(CPL_TX_PKT_LSO) |
-				    LSO_FIRST_SLICE |
-				    LSO_LAST_SLICE |
-				    LSO_IPV6(v6) |
-				    LSO_ETHHDR_LEN(eth_xtra_len/4) |
-				    LSO_IPHDR_LEN(l3hdr_len/4) |
-				    LSO_TCPHDR_LEN(tcp_hdr(skb)->doff));
-		lso->ipid_ofst = cpu_to_be16(0);
-		lso->mss = cpu_to_be16(ssi->gso_size);
-		lso->seqno_offset = cpu_to_be32(0);
-		lso->len = cpu_to_be32(skb->len);
-
-		/*
-		 * Set up TX Packet CPL pointer, control word and perform
-		 * accounting.
-		 */
-		cpl = (void *)(lso + 1);
-		cntrl = (TXPKT_CSUM_TYPE(v6 ? TX_CSUM_TCPIP6 : TX_CSUM_TCPIP) |
-			 TXPKT_IPHDR_LEN(l3hdr_len) |
-			 TXPKT_ETHHDR_LEN(eth_xtra_len));
-		txq->tso++;
-		txq->tx_cso += ssi->gso_segs;
-	} else {
-		int len;
-
-		len = is_eth_imm(skb) ? skb->len + sizeof(*cpl) : sizeof(*cpl);
-		wr->op_immdlen =
-			cpu_to_be32(FW_WR_OP(FW_ETH_TX_PKT_VM_WR) |
-				    FW_WR_IMMDLEN(len));
-
-		/*
-		 * Set up TX Packet CPL pointer, control word and perform
-		 * accounting.
-		 */
-		cpl = (void *)(wr + 1);
-		if (skb->ip_summed == CHECKSUM_PARTIAL) {
-			cntrl = hwcsum(skb) | TXPKT_IPCSUM_DIS;
-			txq->tx_cso++;
-		} else
-			cntrl = TXPKT_L4CSUM_DIS | TXPKT_IPCSUM_DIS;
-	}
-
-	/*
-	 * If there's a VLAN tag present, add that to the list of things to
-	 * do in this Work Request.
-	 */
-	if (vlan_tx_tag_present(skb)) {
-		txq->vlan_ins++;
-		cntrl |= TXPKT_VLAN_VLD | TXPKT_VLAN(vlan_tx_tag_get(skb));
-	}
-
-	/*
-	 * Fill in the TX Packet CPL message header.
-	 */
-	cpl->ctrl0 = cpu_to_be32(TXPKT_OPCODE(CPL_TX_PKT_XT) |
-				 TXPKT_INTF(pi->port_id) |
-				 TXPKT_PF(0));
-	cpl->pack = cpu_to_be16(0);
-	cpl->len = cpu_to_be16(skb->len);
-	cpl->ctrl1 = cpu_to_be64(cntrl);
-
-#ifdef T4_TRACE
-	T4_TRACE5(adapter->tb[txq->q.cntxt_id & 7],
-		  "eth_xmit: ndesc %u, credits %u, pidx %u, len %u, frags %u",
-		  ndesc, credits, txq->q.pidx, skb->len, ssi->nr_frags);
-#endif
-
-	/*
-	 * Fill in the body of the TX Packet CPL message with either in-lined
-	 * data or a Scatter/Gather List.
-	 */
-	if (is_eth_imm(skb)) {
-		/*
-		 * In-line the packet's data and free the skb since we don't
-		 * need it any longer.
-		 */
-		inline_tx_skb(skb, &txq->q, cpl + 1);
-		dev_kfree_skb(skb);
-	} else {
-		/*
-		 * Write the skb's Scatter/Gather list into the TX Packet CPL
-		 * message and retain a pointer to the skb so we can free it
-		 * later when its DMA completes.  (We store the skb pointer
-		 * in the Software Descriptor corresponding to the last TX
-		 * Descriptor used by the Work Request.)
-		 *
-		 * The retained skb will be freed when the corresponding TX
-		 * Descriptors are reclaimed after their DMAs complete.
-		 * However, this could take quite a while since, in general,
-		 * the hardware is set up to be lazy about sending DMA
-		 * completion notifications to us and we mostly perform TX
-		 * reclaims in the transmit routine.
-		 *
-		 * This is good for performamce but means that we rely on new
-		 * TX packets arriving to run the destructors of completed
-		 * packets, which open up space in their sockets' send queues.
-		 * Sometimes we do not get such new packets causing TX to
-		 * stall.  A single UDP transmitter is a good example of this
-		 * situation.  We have a clean up timer that periodically
-		 * reclaims completed packets but it doesn't run often enough
-		 * (nor do we want it to) to prevent lengthy stalls.  A
-		 * solution to this problem is to run the destructor early,
-		 * after the packet is queued but before it's DMAd.  A con is
-		 * that we lie to socket memory accounting, but the amount of
-		 * extra memory is reasonable (limited by the number of TX
-		 * descriptors), the packets do actually get freed quickly by
-		 * new packets almost always, and for protocols like TCP that
-		 * wait for acks to really free up the data the extra memory
-		 * is even less.  On the positive side we run the destructors
-		 * on the sending CPU rather than on a potentially different
-		 * completing CPU, usually a good thing.
-		 *
-		 * Run the destructor before telling the DMA engine about the
-		 * packet to make sure it doesn't complete and get freed
-		 * prematurely.
-		 */
-		struct ulptx_sgl *sgl = (struct ulptx_sgl *)(cpl + 1);
-		struct sge_txq *tq = &txq->q;
-		int last_desc;
-
-		/*
-		 * If the Work Request header was an exact multiple of our TX
-		 * Descriptor length, then it's possible that the starting SGL
-		 * pointer lines up exactly with the end of our TX Descriptor
-		 * ring.  If that's the case, wrap around to the beginning
-		 * here ...
-		 */
-		if (unlikely((void *)sgl == (void *)tq->stat)) {
-			sgl = (void *)tq->desc;
-			end = (void *)((void *)tq->desc +
-				       ((void *)end - (void *)tq->stat));
-		}
-
-		write_sgl(skb, tq, sgl, end, 0, addr);
-		skb_orphan(skb);
-
-		last_desc = tq->pidx + ndesc - 1;
-		if (last_desc >= tq->size)
-			last_desc -= tq->size;
-		tq->sdesc[last_desc].skb = skb;
-		tq->sdesc[last_desc].sgl = sgl;
-	}
-
-	/*
-	 * Advance our internal TX Queue state, tell the hardware about
-	 * the new TX descriptors and return success.
-	 */
-	txq_advance(&txq->q, ndesc);
-	dev->trans_start = jiffies;
-	ring_tx_db(adapter, &txq->q, ndesc);
-	return NETDEV_TX_OK;
-
-out_free:
-	/*
-	 * An error of some sort happened.  Free the TX skb and tell the
-	 * OS that we've "dealt" with the packet ...
-	 */
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-/**
- *	t4vf_pktgl_to_skb - build an sk_buff from a packet gather list
- *	@gl: the gather list
- *	@skb_len: size of sk_buff main body if it carries fragments
- *	@pull_len: amount of data to move to the sk_buff's main body
- *
- *	Builds an sk_buff from the given packet gather list.  Returns the
- *	sk_buff or %NULL if sk_buff allocation failed.
- */
-struct sk_buff *t4vf_pktgl_to_skb(const struct pkt_gl *gl,
-				  unsigned int skb_len, unsigned int pull_len)
-{
-	struct sk_buff *skb;
-	struct skb_shared_info *ssi;
-
-	/*
-	 * If the ingress packet is small enough, allocate an skb large enough
-	 * for all of the data and copy it inline.  Otherwise, allocate an skb
-	 * with enough room to pull in the header and reference the rest of
-	 * the data via the skb fragment list.
-	 *
-	 * Below we rely on RX_COPY_THRES being less than the smallest Rx
-	 * buff!  size, which is expected since buffers are at least
-	 * PAGE_SIZEd.  In this case packets up to RX_COPY_THRES have only one
-	 * fragment.
-	 */
-	if (gl->tot_len <= RX_COPY_THRES) {
-		/* small packets have only one fragment */
-		skb = alloc_skb(gl->tot_len, GFP_ATOMIC);
-		if (unlikely(!skb))
-			goto out;
-		__skb_put(skb, gl->tot_len);
-		skb_copy_to_linear_data(skb, gl->va, gl->tot_len);
-	} else {
-		skb = alloc_skb(skb_len, GFP_ATOMIC);
-		if (unlikely(!skb))
-			goto out;
-		__skb_put(skb, pull_len);
-		skb_copy_to_linear_data(skb, gl->va, pull_len);
-
-		ssi = skb_shinfo(skb);
-		ssi->frags[0].page = gl->frags[0].page;
-		ssi->frags[0].page_offset = gl->frags[0].page_offset + pull_len;
-		ssi->frags[0].size = gl->frags[0].size - pull_len;
-		if (gl->nfrags > 1)
-			memcpy(&ssi->frags[1], &gl->frags[1],
-			       (gl->nfrags-1) * sizeof(skb_frag_t));
-		ssi->nr_frags = gl->nfrags;
-
-		skb->len = gl->tot_len;
-		skb->data_len = skb->len - pull_len;
-		skb->truesize += skb->data_len;
-
-		/* Get a reference for the last page, we don't own it */
-		get_page(gl->frags[gl->nfrags - 1].page);
-	}
-
-out:
-	return skb;
-}
-
-/**
- *	t4vf_pktgl_free - free a packet gather list
- *	@gl: the gather list
- *
- *	Releases the pages of a packet gather list.  We do not own the last
- *	page on the list and do not free it.
- */
-void t4vf_pktgl_free(const struct pkt_gl *gl)
-{
-	int frag;
-
-	frag = gl->nfrags - 1;
-	while (frag--)
-		put_page(gl->frags[frag].page);
-}
-
-/**
- *	copy_frags - copy fragments from gather list into skb_shared_info
- *	@si: destination skb shared info structure
- *	@gl: source internal packet gather list
- *	@offset: packet start offset in first page
- *
- *	Copy an internal packet gather list into a Linux skb_shared_info
- *	structure.
- */
-static inline void copy_frags(struct skb_shared_info *si,
-			      const struct pkt_gl *gl,
-			      unsigned int offset)
-{
-	unsigned int n;
-
-	/* usually there's just one frag */
-	si->frags[0].page = gl->frags[0].page;
-	si->frags[0].page_offset = gl->frags[0].page_offset + offset;
-	si->frags[0].size = gl->frags[0].size - offset;
-	si->nr_frags = gl->nfrags;
-
-	n = gl->nfrags - 1;
-	if (n)
-		memcpy(&si->frags[1], &gl->frags[1], n * sizeof(skb_frag_t));
-
-	/* get a reference to the last page, we don't own it */
-	get_page(gl->frags[n].page);
-}
-
-/**
- *	do_gro - perform Generic Receive Offload ingress packet processing
- *	@rxq: ingress RX Ethernet Queue
- *	@gl: gather list for ingress packet
- *	@pkt: CPL header for last packet fragment
- *
- *	Perform Generic Receive Offload (GRO) ingress packet processing.
- *	We use the standard Linux GRO interfaces for this.
- */
-static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
-		   const struct cpl_rx_pkt *pkt)
-{
-	int ret;
-	struct sk_buff *skb;
-
-	skb = napi_get_frags(&rxq->rspq.napi);
-	if (unlikely(!skb)) {
-		t4vf_pktgl_free(gl);
-		rxq->stats.rx_drops++;
-		return;
-	}
-
-	copy_frags(skb_shinfo(skb), gl, PKTSHIFT);
-	skb->len = gl->tot_len - PKTSHIFT;
-	skb->data_len = skb->len;
-	skb->truesize += skb->data_len;
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	skb_record_rx_queue(skb, rxq->rspq.idx);
-
-	if (pkt->vlan_ex)
-		__vlan_hwaccel_put_tag(skb, be16_to_cpu(pkt->vlan));
-	ret = napi_gro_frags(&rxq->rspq.napi);
-
-	if (ret == GRO_HELD)
-		rxq->stats.lro_pkts++;
-	else if (ret == GRO_MERGED || ret == GRO_MERGED_FREE)
-		rxq->stats.lro_merged++;
-	rxq->stats.pkts++;
-	rxq->stats.rx_cso++;
-}
-
-/**
- *	t4vf_ethrx_handler - process an ingress ethernet packet
- *	@rspq: the response queue that received the packet
- *	@rsp: the response queue descriptor holding the RX_PKT message
- *	@gl: the gather list of packet fragments
- *
- *	Process an ingress ethernet packet and deliver it to the stack.
- */
-int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
-		       const struct pkt_gl *gl)
-{
-	struct sk_buff *skb;
-	const struct cpl_rx_pkt *pkt = (void *)&rsp[1];
-	bool csum_ok = pkt->csum_calc && !pkt->err_vec;
-	struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
-
-	/*
-	 * If this is a good TCP packet and we have Generic Receive Offload
-	 * enabled, handle the packet in the GRO path.
-	 */
-	if ((pkt->l2info & cpu_to_be32(RXF_TCP)) &&
-	    (rspq->netdev->features & NETIF_F_GRO) && csum_ok &&
-	    !pkt->ip_frag) {
-		do_gro(rxq, gl, pkt);
-		return 0;
-	}
-
-	/*
-	 * Convert the Packet Gather List into an skb.
-	 */
-	skb = t4vf_pktgl_to_skb(gl, RX_SKB_LEN, RX_PULL_LEN);
-	if (unlikely(!skb)) {
-		t4vf_pktgl_free(gl);
-		rxq->stats.rx_drops++;
-		return 0;
-	}
-	__skb_pull(skb, PKTSHIFT);
-	skb->protocol = eth_type_trans(skb, rspq->netdev);
-	skb_record_rx_queue(skb, rspq->idx);
-	rxq->stats.pkts++;
-
-	if (csum_ok && (rspq->netdev->features & NETIF_F_RXCSUM) &&
-	    !pkt->err_vec && (be32_to_cpu(pkt->l2info) & (RXF_UDP|RXF_TCP))) {
-		if (!pkt->ip_frag)
-			skb->ip_summed = CHECKSUM_UNNECESSARY;
-		else {
-			__sum16 c = (__force __sum16)pkt->csum;
-			skb->csum = csum_unfold(c);
-			skb->ip_summed = CHECKSUM_COMPLETE;
-		}
-		rxq->stats.rx_cso++;
-	} else
-		skb_checksum_none_assert(skb);
-
-	if (pkt->vlan_ex) {
-		rxq->stats.vlan_ex++;
-		__vlan_hwaccel_put_tag(skb, be16_to_cpu(pkt->vlan));
-	}
-
-	netif_receive_skb(skb);
-
-	return 0;
-}
-
-/**
- *	is_new_response - check if a response is newly written
- *	@rc: the response control descriptor
- *	@rspq: the response queue
- *
- *	Returns true if a response descriptor contains a yet unprocessed
- *	response.
- */
-static inline bool is_new_response(const struct rsp_ctrl *rc,
-				   const struct sge_rspq *rspq)
-{
-	return RSPD_GEN(rc->type_gen) == rspq->gen;
-}
-
-/**
- *	restore_rx_bufs - put back a packet's RX buffers
- *	@gl: the packet gather list
- *	@fl: the SGE Free List
- *	@nfrags: how many fragments in @si
- *
- *	Called when we find out that the current packet, @si, can't be
- *	processed right away for some reason.  This is a very rare event and
- *	there's no effort to make this suspension/resumption process
- *	particularly efficient.
- *
- *	We implement the suspension by putting all of the RX buffers associated
- *	with the current packet back on the original Free List.  The buffers
- *	have already been unmapped and are left unmapped, we mark them as
- *	unmapped in order to prevent further unmapping attempts.  (Effectively
- *	this function undoes the series of @unmap_rx_buf calls which were done
- *	to create the current packet's gather list.)  This leaves us ready to
- *	restart processing of the packet the next time we start processing the
- *	RX Queue ...
- */
-static void restore_rx_bufs(const struct pkt_gl *gl, struct sge_fl *fl,
-			    int frags)
-{
-	struct rx_sw_desc *sdesc;
-
-	while (frags--) {
-		if (fl->cidx == 0)
-			fl->cidx = fl->size - 1;
-		else
-			fl->cidx--;
-		sdesc = &fl->sdesc[fl->cidx];
-		sdesc->page = gl->frags[frags].page;
-		sdesc->dma_addr |= RX_UNMAPPED_BUF;
-		fl->avail++;
-	}
-}
-
-/**
- *	rspq_next - advance to the next entry in a response queue
- *	@rspq: the queue
- *
- *	Updates the state of a response queue to advance it to the next entry.
- */
-static inline void rspq_next(struct sge_rspq *rspq)
-{
-	rspq->cur_desc = (void *)rspq->cur_desc + rspq->iqe_len;
-	if (unlikely(++rspq->cidx == rspq->size)) {
-		rspq->cidx = 0;
-		rspq->gen ^= 1;
-		rspq->cur_desc = rspq->desc;
-	}
-}
-
-/**
- *	process_responses - process responses from an SGE response queue
- *	@rspq: the ingress response queue to process
- *	@budget: how many responses can be processed in this round
- *
- *	Process responses from a Scatter Gather Engine response queue up to
- *	the supplied budget.  Responses include received packets as well as
- *	control messages from firmware or hardware.
- *
- *	Additionally choose the interrupt holdoff time for the next interrupt
- *	on this queue.  If the system is under memory shortage use a fairly
- *	long delay to help recovery.
- */
-int process_responses(struct sge_rspq *rspq, int budget)
-{
-	struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
-	int budget_left = budget;
-
-	while (likely(budget_left)) {
-		int ret, rsp_type;
-		const struct rsp_ctrl *rc;
-
-		rc = (void *)rspq->cur_desc + (rspq->iqe_len - sizeof(*rc));
-		if (!is_new_response(rc, rspq))
-			break;
-
-		/*
-		 * Figure out what kind of response we've received from the
-		 * SGE.
-		 */
-		rmb();
-		rsp_type = RSPD_TYPE(rc->type_gen);
-		if (likely(rsp_type == RSP_TYPE_FLBUF)) {
-			skb_frag_t *fp;
-			struct pkt_gl gl;
-			const struct rx_sw_desc *sdesc;
-			u32 bufsz, frag;
-			u32 len = be32_to_cpu(rc->pldbuflen_qid);
-
-			/*
-			 * If we get a "new buffer" message from the SGE we
-			 * need to move on to the next Free List buffer.
-			 */
-			if (len & RSPD_NEWBUF) {
-				/*
-				 * We get one "new buffer" message when we
-				 * first start up a queue so we need to ignore
-				 * it when our offset into the buffer is 0.
-				 */
-				if (likely(rspq->offset > 0)) {
-					free_rx_bufs(rspq->adapter, &rxq->fl,
-						     1);
-					rspq->offset = 0;
-				}
-				len = RSPD_LEN(len);
-			}
-			gl.tot_len = len;
-
-			/*
-			 * Gather packet fragments.
-			 */
-			for (frag = 0, fp = gl.frags; /**/; frag++, fp++) {
-				BUG_ON(frag >= MAX_SKB_FRAGS);
-				BUG_ON(rxq->fl.avail == 0);
-				sdesc = &rxq->fl.sdesc[rxq->fl.cidx];
-				bufsz = get_buf_size(sdesc);
-				fp->page = sdesc->page;
-				fp->page_offset = rspq->offset;
-				fp->size = min(bufsz, len);
-				len -= fp->size;
-				if (!len)
-					break;
-				unmap_rx_buf(rspq->adapter, &rxq->fl);
-			}
-			gl.nfrags = frag+1;
-
-			/*
-			 * Last buffer remains mapped so explicitly make it
-			 * coherent for CPU access and start preloading first
-			 * cache line ...
-			 */
-			dma_sync_single_for_cpu(rspq->adapter->pdev_dev,
-						get_buf_addr(sdesc),
-						fp->size, DMA_FROM_DEVICE);
-			gl.va = (page_address(gl.frags[0].page) +
-				 gl.frags[0].page_offset);
-			prefetch(gl.va);
-
-			/*
-			 * Hand the new ingress packet to the handler for
-			 * this Response Queue.
-			 */
-			ret = rspq->handler(rspq, rspq->cur_desc, &gl);
-			if (likely(ret == 0))
-				rspq->offset += ALIGN(fp->size, FL_ALIGN);
-			else
-				restore_rx_bufs(&gl, &rxq->fl, frag);
-		} else if (likely(rsp_type == RSP_TYPE_CPL)) {
-			ret = rspq->handler(rspq, rspq->cur_desc, NULL);
-		} else {
-			WARN_ON(rsp_type > RSP_TYPE_CPL);
-			ret = 0;
-		}
-
-		if (unlikely(ret)) {
-			/*
-			 * Couldn't process descriptor, back off for recovery.
-			 * We use the SGE's last timer which has the longest
-			 * interrupt coalescing value ...
-			 */
-			const int NOMEM_TIMER_IDX = SGE_NTIMERS-1;
-			rspq->next_intr_params =
-				QINTR_TIMER_IDX(NOMEM_TIMER_IDX);
-			break;
-		}
-
-		rspq_next(rspq);
-		budget_left--;
-	}
-
-	/*
-	 * If this is a Response Queue with an associated Free List and
-	 * at least two Egress Queue units available in the Free List
-	 * for new buffer pointers, refill the Free List.
-	 */
-	if (rspq->offset >= 0 &&
-	    rxq->fl.size - rxq->fl.avail >= 2*FL_PER_EQ_UNIT)
-		__refill_fl(rspq->adapter, &rxq->fl);
-	return budget - budget_left;
-}
-
-/**
- *	napi_rx_handler - the NAPI handler for RX processing
- *	@napi: the napi instance
- *	@budget: how many packets we can process in this round
- *
- *	Handler for new data events when using NAPI.  This does not need any
- *	locking or protection from interrupts as data interrupts are off at
- *	this point and other adapter interrupts do not interfere (the latter
- *	in not a concern at all with MSI-X as non-data interrupts then have
- *	a separate handler).
- */
-static int napi_rx_handler(struct napi_struct *napi, int budget)
-{
-	unsigned int intr_params;
-	struct sge_rspq *rspq = container_of(napi, struct sge_rspq, napi);
-	int work_done = process_responses(rspq, budget);
-
-	if (likely(work_done < budget)) {
-		napi_complete(napi);
-		intr_params = rspq->next_intr_params;
-		rspq->next_intr_params = rspq->intr_params;
-	} else
-		intr_params = QINTR_TIMER_IDX(SGE_TIMER_UPD_CIDX);
-
-	if (unlikely(work_done == 0))
-		rspq->unhandled_irqs++;
-
-	t4_write_reg(rspq->adapter,
-		     T4VF_SGE_BASE_ADDR + SGE_VF_GTS,
-		     CIDXINC(work_done) |
-		     INGRESSQID((u32)rspq->cntxt_id) |
-		     SEINTARM(intr_params));
-	return work_done;
-}
-
-/*
- * The MSI-X interrupt handler for an SGE response queue for the NAPI case
- * (i.e., response queue serviced by NAPI polling).
- */
-irqreturn_t t4vf_sge_intr_msix(int irq, void *cookie)
-{
-	struct sge_rspq *rspq = cookie;
-
-	napi_schedule(&rspq->napi);
-	return IRQ_HANDLED;
-}
-
-/*
- * Process the indirect interrupt entries in the interrupt queue and kick off
- * NAPI for each queue that has generated an entry.
- */
-static unsigned int process_intrq(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-	struct sge_rspq *intrq = &s->intrq;
-	unsigned int work_done;
-
-	spin_lock(&adapter->sge.intrq_lock);
-	for (work_done = 0; ; work_done++) {
-		const struct rsp_ctrl *rc;
-		unsigned int qid, iq_idx;
-		struct sge_rspq *rspq;
-
-		/*
-		 * Grab the next response from the interrupt queue and bail
-		 * out if it's not a new response.
-		 */
-		rc = (void *)intrq->cur_desc + (intrq->iqe_len - sizeof(*rc));
-		if (!is_new_response(rc, intrq))
-			break;
-
-		/*
-		 * If the response isn't a forwarded interrupt message issue a
-		 * error and go on to the next response message.  This should
-		 * never happen ...
-		 */
-		rmb();
-		if (unlikely(RSPD_TYPE(rc->type_gen) != RSP_TYPE_INTR)) {
-			dev_err(adapter->pdev_dev,
-				"Unexpected INTRQ response type %d\n",
-				RSPD_TYPE(rc->type_gen));
-			continue;
-		}
-
-		/*
-		 * Extract the Queue ID from the interrupt message and perform
-		 * sanity checking to make sure it really refers to one of our
-		 * Ingress Queues which is active and matches the queue's ID.
-		 * None of these error conditions should ever happen so we may
-		 * want to either make them fatal and/or conditionalized under
-		 * DEBUG.
-		 */
-		qid = RSPD_QID(be32_to_cpu(rc->pldbuflen_qid));
-		iq_idx = IQ_IDX(s, qid);
-		if (unlikely(iq_idx >= MAX_INGQ)) {
-			dev_err(adapter->pdev_dev,
-				"Ingress QID %d out of range\n", qid);
-			continue;
-		}
-		rspq = s->ingr_map[iq_idx];
-		if (unlikely(rspq == NULL)) {
-			dev_err(adapter->pdev_dev,
-				"Ingress QID %d RSPQ=NULL\n", qid);
-			continue;
-		}
-		if (unlikely(rspq->abs_id != qid)) {
-			dev_err(adapter->pdev_dev,
-				"Ingress QID %d refers to RSPQ %d\n",
-				qid, rspq->abs_id);
-			continue;
-		}
-
-		/*
-		 * Schedule NAPI processing on the indicated Response Queue
-		 * and move on to the next entry in the Forwarded Interrupt
-		 * Queue.
-		 */
-		napi_schedule(&rspq->napi);
-		rspq_next(intrq);
-	}
-
-	t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS,
-		     CIDXINC(work_done) |
-		     INGRESSQID(intrq->cntxt_id) |
-		     SEINTARM(intrq->intr_params));
-
-	spin_unlock(&adapter->sge.intrq_lock);
-
-	return work_done;
-}
-
-/*
- * The MSI interrupt handler handles data events from SGE response queues as
- * well as error and other async events as they all use the same MSI vector.
- */
-irqreturn_t t4vf_intr_msi(int irq, void *cookie)
-{
-	struct adapter *adapter = cookie;
-
-	process_intrq(adapter);
-	return IRQ_HANDLED;
-}
-
-/**
- *	t4vf_intr_handler - select the top-level interrupt handler
- *	@adapter: the adapter
- *
- *	Selects the top-level interrupt handler based on the type of interrupts
- *	(MSI-X or MSI).
- */
-irq_handler_t t4vf_intr_handler(struct adapter *adapter)
-{
-	BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0);
-	if (adapter->flags & USING_MSIX)
-		return t4vf_sge_intr_msix;
-	else
-		return t4vf_intr_msi;
-}
-
-/**
- *	sge_rx_timer_cb - perform periodic maintenance of SGE RX queues
- *	@data: the adapter
- *
- *	Runs periodically from a timer to perform maintenance of SGE RX queues.
- *
- *	a) Replenishes RX queues that have run out due to memory shortage.
- *	Normally new RX buffers are added when existing ones are consumed but
- *	when out of memory a queue can become empty.  We schedule NAPI to do
- *	the actual refill.
- */
-static void sge_rx_timer_cb(unsigned long data)
-{
-	struct adapter *adapter = (struct adapter *)data;
-	struct sge *s = &adapter->sge;
-	unsigned int i;
-
-	/*
-	 * Scan the "Starving Free Lists" flag array looking for any Free
-	 * Lists in need of more free buffers.  If we find one and it's not
-	 * being actively polled, then bump its "starving" counter and attempt
-	 * to refill it.  If we're successful in adding enough buffers to push
-	 * the Free List over the starving threshold, then we can clear its
-	 * "starving" status.
-	 */
-	for (i = 0; i < ARRAY_SIZE(s->starving_fl); i++) {
-		unsigned long m;
-
-		for (m = s->starving_fl[i]; m; m &= m - 1) {
-			unsigned int id = __ffs(m) + i * BITS_PER_LONG;
-			struct sge_fl *fl = s->egr_map[id];
-
-			clear_bit(id, s->starving_fl);
-			smp_mb__after_clear_bit();
-
-			/*
-			 * Since we are accessing fl without a lock there's a
-			 * small probability of a false positive where we
-			 * schedule napi but the FL is no longer starving.
-			 * No biggie.
-			 */
-			if (fl_starving(fl)) {
-				struct sge_eth_rxq *rxq;
-
-				rxq = container_of(fl, struct sge_eth_rxq, fl);
-				if (napi_reschedule(&rxq->rspq.napi))
-					fl->starving++;
-				else
-					set_bit(id, s->starving_fl);
-			}
-		}
-	}
-
-	/*
-	 * Reschedule the next scan for starving Free Lists ...
-	 */
-	mod_timer(&s->rx_timer, jiffies + RX_QCHECK_PERIOD);
-}
-
-/**
- *	sge_tx_timer_cb - perform periodic maintenance of SGE Tx queues
- *	@data: the adapter
- *
- *	Runs periodically from a timer to perform maintenance of SGE TX queues.
- *
- *	b) Reclaims completed Tx packets for the Ethernet queues.  Normally
- *	packets are cleaned up by new Tx packets, this timer cleans up packets
- *	when no new packets are being submitted.  This is essential for pktgen,
- *	at least.
- */
-static void sge_tx_timer_cb(unsigned long data)
-{
-	struct adapter *adapter = (struct adapter *)data;
-	struct sge *s = &adapter->sge;
-	unsigned int i, budget;
-
-	budget = MAX_TIMER_TX_RECLAIM;
-	i = s->ethtxq_rover;
-	do {
-		struct sge_eth_txq *txq = &s->ethtxq[i];
-
-		if (reclaimable(&txq->q) && __netif_tx_trylock(txq->txq)) {
-			int avail = reclaimable(&txq->q);
-
-			if (avail > budget)
-				avail = budget;
-
-			free_tx_desc(adapter, &txq->q, avail, true);
-			txq->q.in_use -= avail;
-			__netif_tx_unlock(txq->txq);
-
-			budget -= avail;
-			if (!budget)
-				break;
-		}
-
-		i++;
-		if (i >= s->ethqsets)
-			i = 0;
-	} while (i != s->ethtxq_rover);
-	s->ethtxq_rover = i;
-
-	/*
-	 * If we found too many reclaimable packets schedule a timer in the
-	 * near future to continue where we left off.  Otherwise the next timer
-	 * will be at its normal interval.
-	 */
-	mod_timer(&s->tx_timer, jiffies + (budget ? TX_QCHECK_PERIOD : 2));
-}
-
-/**
- *	t4vf_sge_alloc_rxq - allocate an SGE RX Queue
- *	@adapter: the adapter
- *	@rspq: pointer to to the new rxq's Response Queue to be filled in
- *	@iqasynch: if 0, a normal rspq; if 1, an asynchronous event queue
- *	@dev: the network device associated with the new rspq
- *	@intr_dest: MSI-X vector index (overriden in MSI mode)
- *	@fl: pointer to the new rxq's Free List to be filled in
- *	@hnd: the interrupt handler to invoke for the rspq
- */
-int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq,
-		       bool iqasynch, struct net_device *dev,
-		       int intr_dest,
-		       struct sge_fl *fl, rspq_handler_t hnd)
-{
-	struct port_info *pi = netdev_priv(dev);
-	struct fw_iq_cmd cmd, rpl;
-	int ret, iqandst, flsz = 0;
-
-	/*
-	 * If we're using MSI interrupts and we're not initializing the
-	 * Forwarded Interrupt Queue itself, then set up this queue for
-	 * indirect interrupts to the Forwarded Interrupt Queue.  Obviously
-	 * the Forwarded Interrupt Queue must be set up before any other
-	 * ingress queue ...
-	 */
-	if ((adapter->flags & USING_MSI) && rspq != &adapter->sge.intrq) {
-		iqandst = SGE_INTRDST_IQ;
-		intr_dest = adapter->sge.intrq.abs_id;
-	} else
-		iqandst = SGE_INTRDST_PCI;
-
-	/*
-	 * Allocate the hardware ring for the Response Queue.  The size needs
-	 * to be a multiple of 16 which includes the mandatory status entry
-	 * (regardless of whether the Status Page capabilities are enabled or
-	 * not).
-	 */
-	rspq->size = roundup(rspq->size, 16);
-	rspq->desc = alloc_ring(adapter->pdev_dev, rspq->size, rspq->iqe_len,
-				0, &rspq->phys_addr, NULL, 0);
-	if (!rspq->desc)
-		return -ENOMEM;
-
-	/*
-	 * Fill in the Ingress Queue Command.  Note: Ideally this code would
-	 * be in t4vf_hw.c but there are so many parameters and dependencies
-	 * on our Linux SGE state that we would end up having to pass tons of
-	 * parameters.  We'll have to think about how this might be migrated
-	 * into OS-independent common code ...
-	 */
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_IQ_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_WRITE |
-				    FW_CMD_EXEC);
-	cmd.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_ALLOC |
-					 FW_IQ_CMD_IQSTART(1) |
-					 FW_LEN16(cmd));
-	cmd.type_to_iqandstindex =
-		cpu_to_be32(FW_IQ_CMD_TYPE(FW_IQ_TYPE_FL_INT_CAP) |
-			    FW_IQ_CMD_IQASYNCH(iqasynch) |
-			    FW_IQ_CMD_VIID(pi->viid) |
-			    FW_IQ_CMD_IQANDST(iqandst) |
-			    FW_IQ_CMD_IQANUS(1) |
-			    FW_IQ_CMD_IQANUD(SGE_UPDATEDEL_INTR) |
-			    FW_IQ_CMD_IQANDSTINDEX(intr_dest));
-	cmd.iqdroprss_to_iqesize =
-		cpu_to_be16(FW_IQ_CMD_IQPCIECH(pi->port_id) |
-			    FW_IQ_CMD_IQGTSMODE |
-			    FW_IQ_CMD_IQINTCNTTHRESH(rspq->pktcnt_idx) |
-			    FW_IQ_CMD_IQESIZE(ilog2(rspq->iqe_len) - 4));
-	cmd.iqsize = cpu_to_be16(rspq->size);
-	cmd.iqaddr = cpu_to_be64(rspq->phys_addr);
-
-	if (fl) {
-		/*
-		 * Allocate the ring for the hardware free list (with space
-		 * for its status page) along with the associated software
-		 * descriptor ring.  The free list size needs to be a multiple
-		 * of the Egress Queue Unit.
-		 */
-		fl->size = roundup(fl->size, FL_PER_EQ_UNIT);
-		fl->desc = alloc_ring(adapter->pdev_dev, fl->size,
-				      sizeof(__be64), sizeof(struct rx_sw_desc),
-				      &fl->addr, &fl->sdesc, STAT_LEN);
-		if (!fl->desc) {
-			ret = -ENOMEM;
-			goto err;
-		}
-
-		/*
-		 * Calculate the size of the hardware free list ring plus
-		 * Status Page (which the SGE will place after the end of the
-		 * free list ring) in Egress Queue Units.
-		 */
-		flsz = (fl->size / FL_PER_EQ_UNIT +
-			STAT_LEN / EQ_UNIT);
-
-		/*
-		 * Fill in all the relevant firmware Ingress Queue Command
-		 * fields for the free list.
-		 */
-		cmd.iqns_to_fl0congen =
-			cpu_to_be32(
-				FW_IQ_CMD_FL0HOSTFCMODE(SGE_HOSTFCMODE_NONE) |
-				FW_IQ_CMD_FL0PACKEN |
-				FW_IQ_CMD_FL0PADEN);
-		cmd.fl0dcaen_to_fl0cidxfthresh =
-			cpu_to_be16(
-				FW_IQ_CMD_FL0FBMIN(SGE_FETCHBURSTMIN_64B) |
-				FW_IQ_CMD_FL0FBMAX(SGE_FETCHBURSTMAX_512B));
-		cmd.fl0size = cpu_to_be16(flsz);
-		cmd.fl0addr = cpu_to_be64(fl->addr);
-	}
-
-	/*
-	 * Issue the firmware Ingress Queue Command and extract the results if
-	 * it completes successfully.
-	 */
-	ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (ret)
-		goto err;
-
-	netif_napi_add(dev, &rspq->napi, napi_rx_handler, 64);
-	rspq->cur_desc = rspq->desc;
-	rspq->cidx = 0;
-	rspq->gen = 1;
-	rspq->next_intr_params = rspq->intr_params;
-	rspq->cntxt_id = be16_to_cpu(rpl.iqid);
-	rspq->abs_id = be16_to_cpu(rpl.physiqid);
-	rspq->size--;			/* subtract status entry */
-	rspq->adapter = adapter;
-	rspq->netdev = dev;
-	rspq->handler = hnd;
-
-	/* set offset to -1 to distinguish ingress queues without FL */
-	rspq->offset = fl ? 0 : -1;
-
-	if (fl) {
-		fl->cntxt_id = be16_to_cpu(rpl.fl0id);
-		fl->avail = 0;
-		fl->pend_cred = 0;
-		fl->pidx = 0;
-		fl->cidx = 0;
-		fl->alloc_failed = 0;
-		fl->large_alloc_failed = 0;
-		fl->starving = 0;
-		refill_fl(adapter, fl, fl_cap(fl), GFP_KERNEL);
-	}
-
-	return 0;
-
-err:
-	/*
-	 * An error occurred.  Clean up our partial allocation state and
-	 * return the error.
-	 */
-	if (rspq->desc) {
-		dma_free_coherent(adapter->pdev_dev, rspq->size * rspq->iqe_len,
-				  rspq->desc, rspq->phys_addr);
-		rspq->desc = NULL;
-	}
-	if (fl && fl->desc) {
-		kfree(fl->sdesc);
-		fl->sdesc = NULL;
-		dma_free_coherent(adapter->pdev_dev, flsz * EQ_UNIT,
-				  fl->desc, fl->addr);
-		fl->desc = NULL;
-	}
-	return ret;
-}
-
-/**
- *	t4vf_sge_alloc_eth_txq - allocate an SGE Ethernet TX Queue
- *	@adapter: the adapter
- *	@txq: pointer to the new txq to be filled in
- *	@devq: the network TX queue associated with the new txq
- *	@iqid: the relative ingress queue ID to which events relating to
- *		the new txq should be directed
- */
-int t4vf_sge_alloc_eth_txq(struct adapter *adapter, struct sge_eth_txq *txq,
-			   struct net_device *dev, struct netdev_queue *devq,
-			   unsigned int iqid)
-{
-	int ret, nentries;
-	struct fw_eq_eth_cmd cmd, rpl;
-	struct port_info *pi = netdev_priv(dev);
-
-	/*
-	 * Calculate the size of the hardware TX Queue (including the Status
-	 * Page on the end of the TX Queue) in units of TX Descriptors.
-	 */
-	nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
-
-	/*
-	 * Allocate the hardware ring for the TX ring (with space for its
-	 * status page) along with the associated software descriptor ring.
-	 */
-	txq->q.desc = alloc_ring(adapter->pdev_dev, txq->q.size,
-				 sizeof(struct tx_desc),
-				 sizeof(struct tx_sw_desc),
-				 &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN);
-	if (!txq->q.desc)
-		return -ENOMEM;
-
-	/*
-	 * Fill in the Egress Queue Command.  Note: As with the direct use of
-	 * the firmware Ingress Queue COmmand above in our RXQ allocation
-	 * routine, ideally, this code would be in t4vf_hw.c.  Again, we'll
-	 * have to see if there's some reasonable way to parameterize it
-	 * into the common code ...
-	 */
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_EQ_ETH_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_WRITE |
-				    FW_CMD_EXEC);
-	cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_ALLOC |
-					 FW_EQ_ETH_CMD_EQSTART |
-					 FW_LEN16(cmd));
-	cmd.viid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_VIID(pi->viid));
-	cmd.fetchszm_to_iqid =
-		cpu_to_be32(FW_EQ_ETH_CMD_HOSTFCMODE(SGE_HOSTFCMODE_STPG) |
-			    FW_EQ_ETH_CMD_PCIECHN(pi->port_id) |
-			    FW_EQ_ETH_CMD_IQID(iqid));
-	cmd.dcaen_to_eqsize =
-		cpu_to_be32(FW_EQ_ETH_CMD_FBMIN(SGE_FETCHBURSTMIN_64B) |
-			    FW_EQ_ETH_CMD_FBMAX(SGE_FETCHBURSTMAX_512B) |
-			    FW_EQ_ETH_CMD_CIDXFTHRESH(SGE_CIDXFLUSHTHRESH_32) |
-			    FW_EQ_ETH_CMD_EQSIZE(nentries));
-	cmd.eqaddr = cpu_to_be64(txq->q.phys_addr);
-
-	/*
-	 * Issue the firmware Egress Queue Command and extract the results if
-	 * it completes successfully.
-	 */
-	ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (ret) {
-		/*
-		 * The girmware Ingress Queue Command failed for some reason.
-		 * Free up our partial allocation state and return the error.
-		 */
-		kfree(txq->q.sdesc);
-		txq->q.sdesc = NULL;
-		dma_free_coherent(adapter->pdev_dev,
-				  nentries * sizeof(struct tx_desc),
-				  txq->q.desc, txq->q.phys_addr);
-		txq->q.desc = NULL;
-		return ret;
-	}
-
-	txq->q.in_use = 0;
-	txq->q.cidx = 0;
-	txq->q.pidx = 0;
-	txq->q.stat = (void *)&txq->q.desc[txq->q.size];
-	txq->q.cntxt_id = FW_EQ_ETH_CMD_EQID_GET(be32_to_cpu(rpl.eqid_pkd));
-	txq->q.abs_id =
-		FW_EQ_ETH_CMD_PHYSEQID_GET(be32_to_cpu(rpl.physeqid_pkd));
-	txq->txq = devq;
-	txq->tso = 0;
-	txq->tx_cso = 0;
-	txq->vlan_ins = 0;
-	txq->q.stops = 0;
-	txq->q.restarts = 0;
-	txq->mapping_err = 0;
-	return 0;
-}
-
-/*
- * Free the DMA map resources associated with a TX queue.
- */
-static void free_txq(struct adapter *adapter, struct sge_txq *tq)
-{
-	dma_free_coherent(adapter->pdev_dev,
-			  tq->size * sizeof(*tq->desc) + STAT_LEN,
-			  tq->desc, tq->phys_addr);
-	tq->cntxt_id = 0;
-	tq->sdesc = NULL;
-	tq->desc = NULL;
-}
-
-/*
- * Free the resources associated with a response queue (possibly including a
- * free list).
- */
-static void free_rspq_fl(struct adapter *adapter, struct sge_rspq *rspq,
-			 struct sge_fl *fl)
-{
-	unsigned int flid = fl ? fl->cntxt_id : 0xffff;
-
-	t4vf_iq_free(adapter, FW_IQ_TYPE_FL_INT_CAP,
-		     rspq->cntxt_id, flid, 0xffff);
-	dma_free_coherent(adapter->pdev_dev, (rspq->size + 1) * rspq->iqe_len,
-			  rspq->desc, rspq->phys_addr);
-	netif_napi_del(&rspq->napi);
-	rspq->netdev = NULL;
-	rspq->cntxt_id = 0;
-	rspq->abs_id = 0;
-	rspq->desc = NULL;
-
-	if (fl) {
-		free_rx_bufs(adapter, fl, fl->avail);
-		dma_free_coherent(adapter->pdev_dev,
-				  fl->size * sizeof(*fl->desc) + STAT_LEN,
-				  fl->desc, fl->addr);
-		kfree(fl->sdesc);
-		fl->sdesc = NULL;
-		fl->cntxt_id = 0;
-		fl->desc = NULL;
-	}
-}
-
-/**
- *	t4vf_free_sge_resources - free SGE resources
- *	@adapter: the adapter
- *
- *	Frees resources used by the SGE queue sets.
- */
-void t4vf_free_sge_resources(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-	struct sge_eth_rxq *rxq = s->ethrxq;
-	struct sge_eth_txq *txq = s->ethtxq;
-	struct sge_rspq *evtq = &s->fw_evtq;
-	struct sge_rspq *intrq = &s->intrq;
-	int qs;
-
-	for (qs = 0; qs < adapter->sge.ethqsets; qs++, rxq++, txq++) {
-		if (rxq->rspq.desc)
-			free_rspq_fl(adapter, &rxq->rspq, &rxq->fl);
-		if (txq->q.desc) {
-			t4vf_eth_eq_free(adapter, txq->q.cntxt_id);
-			free_tx_desc(adapter, &txq->q, txq->q.in_use, true);
-			kfree(txq->q.sdesc);
-			free_txq(adapter, &txq->q);
-		}
-	}
-	if (evtq->desc)
-		free_rspq_fl(adapter, evtq, NULL);
-	if (intrq->desc)
-		free_rspq_fl(adapter, intrq, NULL);
-}
-
-/**
- *	t4vf_sge_start - enable SGE operation
- *	@adapter: the adapter
- *
- *	Start tasklets and timers associated with the DMA engine.
- */
-void t4vf_sge_start(struct adapter *adapter)
-{
-	adapter->sge.ethtxq_rover = 0;
-	mod_timer(&adapter->sge.rx_timer, jiffies + RX_QCHECK_PERIOD);
-	mod_timer(&adapter->sge.tx_timer, jiffies + TX_QCHECK_PERIOD);
-}
-
-/**
- *	t4vf_sge_stop - disable SGE operation
- *	@adapter: the adapter
- *
- *	Stop tasklets and timers associated with the DMA engine.  Note that
- *	this is effective only if measures have been taken to disable any HW
- *	events that may restart them.
- */
-void t4vf_sge_stop(struct adapter *adapter)
-{
-	struct sge *s = &adapter->sge;
-
-	if (s->rx_timer.function)
-		del_timer_sync(&s->rx_timer);
-	if (s->tx_timer.function)
-		del_timer_sync(&s->tx_timer);
-}
-
-/**
- *	t4vf_sge_init - initialize SGE
- *	@adapter: the adapter
- *
- *	Performs SGE initialization needed every time after a chip reset.
- *	We do not initialize any of the queue sets here, instead the driver
- *	top-level must request those individually.  We also do not enable DMA
- *	here, that should be done after the queues have been set up.
- */
-int t4vf_sge_init(struct adapter *adapter)
-{
-	struct sge_params *sge_params = &adapter->params.sge;
-	u32 fl0 = sge_params->sge_fl_buffer_size[0];
-	u32 fl1 = sge_params->sge_fl_buffer_size[1];
-	struct sge *s = &adapter->sge;
-
-	/*
-	 * Start by vetting the basic SGE parameters which have been set up by
-	 * the Physical Function Driver.  Ideally we should be able to deal
-	 * with _any_ configuration.  Practice is different ...
-	 */
-	if (fl0 != PAGE_SIZE || (fl1 != 0 && fl1 <= fl0)) {
-		dev_err(adapter->pdev_dev, "bad SGE FL buffer sizes [%d, %d]\n",
-			fl0, fl1);
-		return -EINVAL;
-	}
-	if ((sge_params->sge_control & RXPKTCPLMODE) == 0) {
-		dev_err(adapter->pdev_dev, "bad SGE CPL MODE\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Now translate the adapter parameters into our internal forms.
-	 */
-	if (fl1)
-		FL_PG_ORDER = ilog2(fl1) - PAGE_SHIFT;
-	STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE) ? 128 : 64);
-	PKTSHIFT = PKTSHIFT_GET(sge_params->sge_control);
-	FL_ALIGN = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
-			 SGE_INGPADBOUNDARY_SHIFT);
-
-	/*
-	 * Set up tasklet timers.
-	 */
-	setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adapter);
-	setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adapter);
-
-	/*
-	 * Initialize Forwarded Interrupt Queue lock.
-	 */
-	spin_lock_init(&s->intrq_lock);
-
-	return 0;
-}
diff --git a/drivers/net/cxgb4vf/t4vf_common.h b/drivers/net/cxgb4vf/t4vf_common.h
deleted file mode 100644
index a65c80aed1f2..000000000000
--- a/drivers/net/cxgb4vf/t4vf_common.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
- * driver for Linux.
- *
- * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef __T4VF_COMMON_H__
-#define __T4VF_COMMON_H__
-
-#include "../cxgb4/t4fw_api.h"
-
-/*
- * The "len16" field of a Firmware Command Structure ...
- */
-#define FW_LEN16(fw_struct) FW_CMD_LEN16(sizeof(fw_struct) / 16)
-
-/*
- * Per-VF statistics.
- */
-struct t4vf_port_stats {
-	/*
-	 * TX statistics.
-	 */
-	u64 tx_bcast_bytes;		/* broadcast */
-	u64 tx_bcast_frames;
-	u64 tx_mcast_bytes;		/* multicast */
-	u64 tx_mcast_frames;
-	u64 tx_ucast_bytes;		/* unicast */
-	u64 tx_ucast_frames;
-	u64 tx_drop_frames;		/* TX dropped frames */
-	u64 tx_offload_bytes;		/* offload */
-	u64 tx_offload_frames;
-
-	/*
-	 * RX statistics.
-	 */
-	u64 rx_bcast_bytes;		/* broadcast */
-	u64 rx_bcast_frames;
-	u64 rx_mcast_bytes;		/* multicast */
-	u64 rx_mcast_frames;
-	u64 rx_ucast_bytes;
-	u64 rx_ucast_frames;		/* unicast */
-
-	u64 rx_err_frames;		/* RX error frames */
-};
-
-/*
- * Per-"port" (Virtual Interface) link configuration ...
- */
-struct link_config {
-	unsigned int   supported;        /* link capabilities */
-	unsigned int   advertising;      /* advertised capabilities */
-	unsigned short requested_speed;  /* speed user has requested */
-	unsigned short speed;            /* actual link speed */
-	unsigned char  requested_fc;     /* flow control user has requested */
-	unsigned char  fc;               /* actual link flow control */
-	unsigned char  autoneg;          /* autonegotiating? */
-	unsigned char  link_ok;          /* link up? */
-};
-
-enum {
-	PAUSE_RX      = 1 << 0,
-	PAUSE_TX      = 1 << 1,
-	PAUSE_AUTONEG = 1 << 2
-};
-
-/*
- * General device parameters ...
- */
-struct dev_params {
-	u32 fwrev;			/* firmware version */
-	u32 tprev;			/* TP Microcode Version */
-};
-
-/*
- * Scatter Gather Engine parameters.  These are almost all determined by the
- * Physical Function Driver.  We just need to grab them to see within which
- * environment we're playing ...
- */
-struct sge_params {
-	u32 sge_control;		/* padding, boundaries, lengths, etc. */
-	u32 sge_host_page_size;		/* RDMA page sizes */
-	u32 sge_queues_per_page;	/* RDMA queues/page */
-	u32 sge_user_mode_limits;	/* limits for BAR2 user mode accesses */
-	u32 sge_fl_buffer_size[16];	/* free list buffer sizes */
-	u32 sge_ingress_rx_threshold;	/* RX counter interrupt threshold[4] */
-	u32 sge_timer_value_0_and_1;	/* interrupt coalescing timer values */
-	u32 sge_timer_value_2_and_3;
-	u32 sge_timer_value_4_and_5;
-};
-
-/*
- * Vital Product Data parameters.
- */
-struct vpd_params {
-	u32 cclk;			/* Core Clock (KHz) */
-};
-
-/*
- * Global Receive Side Scaling (RSS) parameters in host-native format.
- */
-struct rss_params {
-	unsigned int mode;		/* RSS mode */
-	union {
-	    struct {
-		unsigned int synmapen:1;	/* SYN Map Enable */
-		unsigned int syn4tupenipv6:1;	/* enable hashing 4-tuple IPv6 SYNs */
-		unsigned int syn2tupenipv6:1;	/* enable hashing 2-tuple IPv6 SYNs */
-		unsigned int syn4tupenipv4:1;	/* enable hashing 4-tuple IPv4 SYNs */
-		unsigned int syn2tupenipv4:1;	/* enable hashing 2-tuple IPv4 SYNs */
-		unsigned int ofdmapen:1;	/* Offload Map Enable */
-		unsigned int tnlmapen:1;	/* Tunnel Map Enable */
-		unsigned int tnlalllookup:1;	/* Tunnel All Lookup */
-		unsigned int hashtoeplitz:1;	/* use Toeplitz hash */
-	    } basicvirtual;
-	} u;
-};
-
-/*
- * Virtual Interface RSS Configuration in host-native format.
- */
-union rss_vi_config {
-    struct {
-	u16 defaultq;			/* Ingress Queue ID for !tnlalllookup */
-	unsigned int ip6fourtupen:1;	/* hash 4-tuple IPv6 ingress packets */
-	unsigned int ip6twotupen:1;	/* hash 2-tuple IPv6 ingress packets */
-	unsigned int ip4fourtupen:1;	/* hash 4-tuple IPv4 ingress packets */
-	unsigned int ip4twotupen:1;	/* hash 2-tuple IPv4 ingress packets */
-	int udpen;			/* hash 4-tuple UDP ingress packets */
-    } basicvirtual;
-};
-
-/*
- * Maximum resources provisioned for a PCI VF.
- */
-struct vf_resources {
-	unsigned int nvi;		/* N virtual interfaces */
-	unsigned int neq;		/* N egress Qs */
-	unsigned int nethctrl;		/* N egress ETH or CTRL Qs */
-	unsigned int niqflint;		/* N ingress Qs/w free list(s) & intr */
-	unsigned int niq;		/* N ingress Qs */
-	unsigned int tc;		/* PCI-E traffic class */
-	unsigned int pmask;		/* port access rights mask */
-	unsigned int nexactf;		/* N exact MPS filters */
-	unsigned int r_caps;		/* read capabilities */
-	unsigned int wx_caps;		/* write/execute capabilities */
-};
-
-/*
- * Per-"adapter" (Virtual Function) parameters.
- */
-struct adapter_params {
-	struct dev_params dev;		/* general device parameters */
-	struct sge_params sge;		/* Scatter Gather Engine */
-	struct vpd_params vpd;		/* Vital Product Data */
-	struct rss_params rss;		/* Receive Side Scaling */
-	struct vf_resources vfres;	/* Virtual Function Resource limits */
-	u8 nports;			/* # of Ethernet "ports" */
-};
-
-#include "adapter.h"
-
-#ifndef PCI_VENDOR_ID_CHELSIO
-# define PCI_VENDOR_ID_CHELSIO 0x1425
-#endif
-
-#define for_each_port(adapter, iter) \
-	for (iter = 0; iter < (adapter)->params.nports; iter++)
-
-static inline bool is_10g_port(const struct link_config *lc)
-{
-	return (lc->supported & SUPPORTED_10000baseT_Full) != 0;
-}
-
-static inline unsigned int core_ticks_per_usec(const struct adapter *adapter)
-{
-	return adapter->params.vpd.cclk / 1000;
-}
-
-static inline unsigned int us_to_core_ticks(const struct adapter *adapter,
-					    unsigned int us)
-{
-	return (us * adapter->params.vpd.cclk) / 1000;
-}
-
-static inline unsigned int core_ticks_to_us(const struct adapter *adapter,
-					    unsigned int ticks)
-{
-	return (ticks * 1000) / adapter->params.vpd.cclk;
-}
-
-int t4vf_wr_mbox_core(struct adapter *, const void *, int, void *, bool);
-
-static inline int t4vf_wr_mbox(struct adapter *adapter, const void *cmd,
-			       int size, void *rpl)
-{
-	return t4vf_wr_mbox_core(adapter, cmd, size, rpl, true);
-}
-
-static inline int t4vf_wr_mbox_ns(struct adapter *adapter, const void *cmd,
-				  int size, void *rpl)
-{
-	return t4vf_wr_mbox_core(adapter, cmd, size, rpl, false);
-}
-
-int __devinit t4vf_wait_dev_ready(struct adapter *);
-int __devinit t4vf_port_init(struct adapter *, int);
-
-int t4vf_fw_reset(struct adapter *);
-int t4vf_query_params(struct adapter *, unsigned int, const u32 *, u32 *);
-int t4vf_set_params(struct adapter *, unsigned int, const u32 *, const u32 *);
-
-int t4vf_get_sge_params(struct adapter *);
-int t4vf_get_vpd_params(struct adapter *);
-int t4vf_get_dev_params(struct adapter *);
-int t4vf_get_rss_glb_config(struct adapter *);
-int t4vf_get_vfres(struct adapter *);
-
-int t4vf_read_rss_vi_config(struct adapter *, unsigned int,
-			    union rss_vi_config *);
-int t4vf_write_rss_vi_config(struct adapter *, unsigned int,
-			     union rss_vi_config *);
-int t4vf_config_rss_range(struct adapter *, unsigned int, int, int,
-			  const u16 *, int);
-
-int t4vf_alloc_vi(struct adapter *, int);
-int t4vf_free_vi(struct adapter *, int);
-int t4vf_enable_vi(struct adapter *, unsigned int, bool, bool);
-int t4vf_identify_port(struct adapter *, unsigned int, unsigned int);
-
-int t4vf_set_rxmode(struct adapter *, unsigned int, int, int, int, int, int,
-		    bool);
-int t4vf_alloc_mac_filt(struct adapter *, unsigned int, bool, unsigned int,
-			const u8 **, u16 *, u64 *, bool);
-int t4vf_change_mac(struct adapter *, unsigned int, int, const u8 *, bool);
-int t4vf_set_addr_hash(struct adapter *, unsigned int, bool, u64, bool);
-int t4vf_get_port_stats(struct adapter *, int, struct t4vf_port_stats *);
-
-int t4vf_iq_free(struct adapter *, unsigned int, unsigned int, unsigned int,
-		 unsigned int);
-int t4vf_eth_eq_free(struct adapter *, unsigned int);
-
-int t4vf_handle_fw_rpl(struct adapter *, const __be64 *);
-
-#endif /* __T4VF_COMMON_H__ */
diff --git a/drivers/net/cxgb4vf/t4vf_defs.h b/drivers/net/cxgb4vf/t4vf_defs.h
deleted file mode 100644
index c7b127d93767..000000000000
--- a/drivers/net/cxgb4vf/t4vf_defs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
- * driver for Linux.
- *
- * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef __T4VF_DEFS_H__
-#define __T4VF_DEFS_H__
-
-#include "../cxgb4/t4_regs.h"
-
-/*
- * The VF Register Map.
- *
- * The Scatter Gather Engine (SGE), Multiport Support module (MPS), PIO Local
- * bus module (PL) and CPU Interface Module (CIM) components are mapped via
- * the Slice to Module Map Table (see below) in the Physical Function Register
- * Map.  The Mail Box Data (MBDATA) range is mapped via the PCI-E Mailbox Base
- * and Offset registers in the PF Register Map.  The MBDATA base address is
- * quite constrained as it determines the Mailbox Data addresses for both PFs
- * and VFs, and therefore must fit in both the VF and PF Register Maps without
- * overlapping other registers.
- */
-#define T4VF_SGE_BASE_ADDR	0x0000
-#define T4VF_MPS_BASE_ADDR	0x0100
-#define T4VF_PL_BASE_ADDR	0x0200
-#define T4VF_MBDATA_BASE_ADDR	0x0240
-#define T4VF_CIM_BASE_ADDR	0x0300
-
-#define T4VF_REGMAP_START	0x0000
-#define T4VF_REGMAP_SIZE	0x0400
-
-/*
- * There's no hardware limitation which requires that the addresses of the
- * Mailbox Data in the fixed CIM PF map and the programmable VF map must
- * match.  However, it's a useful convention ...
- */
-#if T4VF_MBDATA_BASE_ADDR != CIM_PF_MAILBOX_DATA
-#error T4VF_MBDATA_BASE_ADDR must match CIM_PF_MAILBOX_DATA!
-#endif
-
-/*
- * Virtual Function "Slice to Module Map Table" definitions.
- *
- * This table allows us to map subsets of the various module register sets
- * into the T4VF Register Map.  Each table entry identifies the index of the
- * module whose registers are being mapped, the offset within the module's
- * register set that the mapping should start at, the limit of the mapping,
- * and the offset within the T4VF Register Map to which the module's registers
- * are being mapped.  All addresses and qualtities are in terms of 32-bit
- * words.  The "limit" value is also in terms of 32-bit words and is equal to
- * the last address mapped in the T4VF Register Map 1 (i.e. it's a "<="
- * relation rather than a "<").
- */
-#define T4VF_MOD_MAP(module, index, first, last) \
-	T4VF_MOD_MAP_##module##_INDEX  = (index), \
-	T4VF_MOD_MAP_##module##_FIRST  = (first), \
-	T4VF_MOD_MAP_##module##_LAST   = (last), \
-	T4VF_MOD_MAP_##module##_OFFSET = ((first)/4), \
-	T4VF_MOD_MAP_##module##_BASE = \
-		(T4VF_##module##_BASE_ADDR/4 + (first)/4), \
-	T4VF_MOD_MAP_##module##_LIMIT = \
-		(T4VF_##module##_BASE_ADDR/4 + (last)/4),
-
-#define SGE_VF_KDOORBELL 0x0
-#define SGE_VF_GTS 0x4
-#define MPS_VF_CTL 0x0
-#define MPS_VF_STAT_RX_VF_ERR_FRAMES_H 0xfc
-#define PL_VF_WHOAMI 0x0
-#define CIM_VF_EXT_MAILBOX_CTRL 0x0
-#define CIM_VF_EXT_MAILBOX_STATUS 0x4
-
-enum {
-    T4VF_MOD_MAP(SGE, 2, SGE_VF_KDOORBELL, SGE_VF_GTS)
-    T4VF_MOD_MAP(MPS, 0, MPS_VF_CTL, MPS_VF_STAT_RX_VF_ERR_FRAMES_H)
-    T4VF_MOD_MAP(PL,  3, PL_VF_WHOAMI, PL_VF_WHOAMI)
-    T4VF_MOD_MAP(CIM, 1, CIM_VF_EXT_MAILBOX_CTRL, CIM_VF_EXT_MAILBOX_STATUS)
-};
-
-/*
- * There isn't a Slice to Module Map Table entry for the Mailbox Data
- * registers, but it's convenient to use similar names as above.  There are 8
- * little-endian 64-bit Mailbox Data registers.  Note that the "instances"
- * value below is in terms of 32-bit words which matches the "word" addressing
- * space we use above for the Slice to Module Map Space.
- */
-#define NUM_CIM_VF_MAILBOX_DATA_INSTANCES 16
-
-#define T4VF_MBDATA_FIRST	0
-#define T4VF_MBDATA_LAST	((NUM_CIM_VF_MAILBOX_DATA_INSTANCES-1)*4)
-
-#endif /* __T4T4VF_DEFS_H__ */
diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c
deleted file mode 100644
index fe3fd3dad6f7..000000000000
--- a/drivers/net/cxgb4vf/t4vf_hw.c
+++ /dev/null
@@ -1,1387 +0,0 @@
-/*
- * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
- * driver for Linux.
- *
- * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-
-#include "t4vf_common.h"
-#include "t4vf_defs.h"
-
-#include "../cxgb4/t4_regs.h"
-#include "../cxgb4/t4fw_api.h"
-
-/*
- * Wait for the device to become ready (signified by our "who am I" register
- * returning a value other than all 1's).  Return an error if it doesn't
- * become ready ...
- */
-int __devinit t4vf_wait_dev_ready(struct adapter *adapter)
-{
-	const u32 whoami = T4VF_PL_BASE_ADDR + PL_VF_WHOAMI;
-	const u32 notready1 = 0xffffffff;
-	const u32 notready2 = 0xeeeeeeee;
-	u32 val;
-
-	val = t4_read_reg(adapter, whoami);
-	if (val != notready1 && val != notready2)
-		return 0;
-	msleep(500);
-	val = t4_read_reg(adapter, whoami);
-	if (val != notready1 && val != notready2)
-		return 0;
-	else
-		return -EIO;
-}
-
-/*
- * Get the reply to a mailbox command and store it in @rpl in big-endian order
- * (since the firmware data structures are specified in a big-endian layout).
- */
-static void get_mbox_rpl(struct adapter *adapter, __be64 *rpl, int size,
-			 u32 mbox_data)
-{
-	for ( ; size; size -= 8, mbox_data += 8)
-		*rpl++ = cpu_to_be64(t4_read_reg64(adapter, mbox_data));
-}
-
-/*
- * Dump contents of mailbox with a leading tag.
- */
-static void dump_mbox(struct adapter *adapter, const char *tag, u32 mbox_data)
-{
-	dev_err(adapter->pdev_dev,
-		"mbox %s: %llx %llx %llx %llx %llx %llx %llx %llx\n", tag,
-		(unsigned long long)t4_read_reg64(adapter, mbox_data +  0),
-		(unsigned long long)t4_read_reg64(adapter, mbox_data +  8),
-		(unsigned long long)t4_read_reg64(adapter, mbox_data + 16),
-		(unsigned long long)t4_read_reg64(adapter, mbox_data + 24),
-		(unsigned long long)t4_read_reg64(adapter, mbox_data + 32),
-		(unsigned long long)t4_read_reg64(adapter, mbox_data + 40),
-		(unsigned long long)t4_read_reg64(adapter, mbox_data + 48),
-		(unsigned long long)t4_read_reg64(adapter, mbox_data + 56));
-}
-
-/**
- *	t4vf_wr_mbox_core - send a command to FW through the mailbox
- *	@adapter: the adapter
- *	@cmd: the command to write
- *	@size: command length in bytes
- *	@rpl: where to optionally store the reply
- *	@sleep_ok: if true we may sleep while awaiting command completion
- *
- *	Sends the given command to FW through the mailbox and waits for the
- *	FW to execute the command.  If @rpl is not %NULL it is used to store
- *	the FW's reply to the command.  The command and its optional reply
- *	are of the same length.  FW can take up to 500 ms to respond.
- *	@sleep_ok determines whether we may sleep while awaiting the response.
- *	If sleeping is allowed we use progressive backoff otherwise we spin.
- *
- *	The return value is 0 on success or a negative errno on failure.  A
- *	failure can happen either because we are not able to execute the
- *	command or FW executes it but signals an error.  In the latter case
- *	the return value is the error code indicated by FW (negated).
- */
-int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
-		      void *rpl, bool sleep_ok)
-{
-	static const int delay[] = {
-		1, 1, 3, 5, 10, 10, 20, 50, 100
-	};
-
-	u32 v;
-	int i, ms, delay_idx;
-	const __be64 *p;
-	u32 mbox_data = T4VF_MBDATA_BASE_ADDR;
-	u32 mbox_ctl = T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL;
-
-	/*
-	 * Commands must be multiples of 16 bytes in length and may not be
-	 * larger than the size of the Mailbox Data register array.
-	 */
-	if ((size % 16) != 0 ||
-	    size > NUM_CIM_VF_MAILBOX_DATA_INSTANCES * 4)
-		return -EINVAL;
-
-	/*
-	 * Loop trying to get ownership of the mailbox.  Return an error
-	 * if we can't gain ownership.
-	 */
-	v = MBOWNER_GET(t4_read_reg(adapter, mbox_ctl));
-	for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
-		v = MBOWNER_GET(t4_read_reg(adapter, mbox_ctl));
-	if (v != MBOX_OWNER_DRV)
-		return v == MBOX_OWNER_FW ? -EBUSY : -ETIMEDOUT;
-
-	/*
-	 * Write the command array into the Mailbox Data register array and
-	 * transfer ownership of the mailbox to the firmware.
-	 *
-	 * For the VFs, the Mailbox Data "registers" are actually backed by
-	 * T4's "MA" interface rather than PL Registers (as is the case for
-	 * the PFs).  Because these are in different coherency domains, the
-	 * write to the VF's PL-register-backed Mailbox Control can race in
-	 * front of the writes to the MA-backed VF Mailbox Data "registers".
-	 * So we need to do a read-back on at least one byte of the VF Mailbox
-	 * Data registers before doing the write to the VF Mailbox Control
-	 * register.
-	 */
-	for (i = 0, p = cmd; i < size; i += 8)
-		t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++));
-	t4_read_reg(adapter, mbox_data);         /* flush write */
-
-	t4_write_reg(adapter, mbox_ctl,
-		     MBMSGVALID | MBOWNER(MBOX_OWNER_FW));
-	t4_read_reg(adapter, mbox_ctl);          /* flush write */
-
-	/*
-	 * Spin waiting for firmware to acknowledge processing our command.
-	 */
-	delay_idx = 0;
-	ms = delay[0];
-
-	for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) {
-		if (sleep_ok) {
-			ms = delay[delay_idx];
-			if (delay_idx < ARRAY_SIZE(delay) - 1)
-				delay_idx++;
-			msleep(ms);
-		} else
-			mdelay(ms);
-
-		/*
-		 * If we're the owner, see if this is the reply we wanted.
-		 */
-		v = t4_read_reg(adapter, mbox_ctl);
-		if (MBOWNER_GET(v) == MBOX_OWNER_DRV) {
-			/*
-			 * If the Message Valid bit isn't on, revoke ownership
-			 * of the mailbox and continue waiting for our reply.
-			 */
-			if ((v & MBMSGVALID) == 0) {
-				t4_write_reg(adapter, mbox_ctl,
-					     MBOWNER(MBOX_OWNER_NONE));
-				continue;
-			}
-
-			/*
-			 * We now have our reply.  Extract the command return
-			 * value, copy the reply back to our caller's buffer
-			 * (if specified) and revoke ownership of the mailbox.
-			 * We return the (negated) firmware command return
-			 * code (this depends on FW_SUCCESS == 0).
-			 */
-
-			/* return value in low-order little-endian word */
-			v = t4_read_reg(adapter, mbox_data);
-			if (FW_CMD_RETVAL_GET(v))
-				dump_mbox(adapter, "FW Error", mbox_data);
-
-			if (rpl) {
-				/* request bit in high-order BE word */
-				WARN_ON((be32_to_cpu(*(const u32 *)cmd)
-					 & FW_CMD_REQUEST) == 0);
-				get_mbox_rpl(adapter, rpl, size, mbox_data);
-				WARN_ON((be32_to_cpu(*(u32 *)rpl)
-					 & FW_CMD_REQUEST) != 0);
-			}
-			t4_write_reg(adapter, mbox_ctl,
-				     MBOWNER(MBOX_OWNER_NONE));
-			return -FW_CMD_RETVAL_GET(v);
-		}
-	}
-
-	/*
-	 * We timed out.  Return the error ...
-	 */
-	dump_mbox(adapter, "FW Timeout", mbox_data);
-	return -ETIMEDOUT;
-}
-
-/**
- *	hash_mac_addr - return the hash value of a MAC address
- *	@addr: the 48-bit Ethernet MAC address
- *
- *	Hashes a MAC address according to the hash function used by hardware
- *	inexact (hash) address matching.
- */
-static int hash_mac_addr(const u8 *addr)
-{
-	u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2];
-	u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5];
-	a ^= b;
-	a ^= (a >> 12);
-	a ^= (a >> 6);
-	return a & 0x3f;
-}
-
-/**
- *	init_link_config - initialize a link's SW state
- *	@lc: structure holding the link state
- *	@caps: link capabilities
- *
- *	Initializes the SW state maintained for each link, including the link's
- *	capabilities and default speed/flow-control/autonegotiation settings.
- */
-static void __devinit init_link_config(struct link_config *lc,
-				       unsigned int caps)
-{
-	lc->supported = caps;
-	lc->requested_speed = 0;
-	lc->speed = 0;
-	lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
-	if (lc->supported & SUPPORTED_Autoneg) {
-		lc->advertising = lc->supported;
-		lc->autoneg = AUTONEG_ENABLE;
-		lc->requested_fc |= PAUSE_AUTONEG;
-	} else {
-		lc->advertising = 0;
-		lc->autoneg = AUTONEG_DISABLE;
-	}
-}
-
-/**
- *	t4vf_port_init - initialize port hardware/software state
- *	@adapter: the adapter
- *	@pidx: the adapter port index
- */
-int __devinit t4vf_port_init(struct adapter *adapter, int pidx)
-{
-	struct port_info *pi = adap2pinfo(adapter, pidx);
-	struct fw_vi_cmd vi_cmd, vi_rpl;
-	struct fw_port_cmd port_cmd, port_rpl;
-	int v;
-	u32 word;
-
-	/*
-	 * Execute a VI Read command to get our Virtual Interface information
-	 * like MAC address, etc.
-	 */
-	memset(&vi_cmd, 0, sizeof(vi_cmd));
-	vi_cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) |
-				       FW_CMD_REQUEST |
-				       FW_CMD_READ);
-	vi_cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(vi_cmd));
-	vi_cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID(pi->viid));
-	v = t4vf_wr_mbox(adapter, &vi_cmd, sizeof(vi_cmd), &vi_rpl);
-	if (v)
-		return v;
-
-	BUG_ON(pi->port_id != FW_VI_CMD_PORTID_GET(vi_rpl.portid_pkd));
-	pi->rss_size = FW_VI_CMD_RSSSIZE_GET(be16_to_cpu(vi_rpl.rsssize_pkd));
-	t4_os_set_hw_addr(adapter, pidx, vi_rpl.mac);
-
-	/*
-	 * If we don't have read access to our port information, we're done
-	 * now.  Otherwise, execute a PORT Read command to get it ...
-	 */
-	if (!(adapter->params.vfres.r_caps & FW_CMD_CAP_PORT))
-		return 0;
-
-	memset(&port_cmd, 0, sizeof(port_cmd));
-	port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP(FW_PORT_CMD) |
-					    FW_CMD_REQUEST |
-					    FW_CMD_READ |
-					    FW_PORT_CMD_PORTID(pi->port_id));
-	port_cmd.action_to_len16 =
-		cpu_to_be32(FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) |
-			    FW_LEN16(port_cmd));
-	v = t4vf_wr_mbox(adapter, &port_cmd, sizeof(port_cmd), &port_rpl);
-	if (v)
-		return v;
-
-	v = 0;
-	word = be16_to_cpu(port_rpl.u.info.pcap);
-	if (word & FW_PORT_CAP_SPEED_100M)
-		v |= SUPPORTED_100baseT_Full;
-	if (word & FW_PORT_CAP_SPEED_1G)
-		v |= SUPPORTED_1000baseT_Full;
-	if (word & FW_PORT_CAP_SPEED_10G)
-		v |= SUPPORTED_10000baseT_Full;
-	if (word & FW_PORT_CAP_ANEG)
-		v |= SUPPORTED_Autoneg;
-	init_link_config(&pi->link_cfg, v);
-
-	return 0;
-}
-
-/**
- *      t4vf_fw_reset - issue a reset to FW
- *      @adapter: the adapter
- *
- *	Issues a reset command to FW.  For a Physical Function this would
- *	result in the Firmware reseting all of its state.  For a Virtual
- *	Function this just resets the state associated with the VF.
- */
-int t4vf_fw_reset(struct adapter *adapter)
-{
-	struct fw_reset_cmd cmd;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RESET_CMD) |
-				      FW_CMD_WRITE);
-	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-}
-
-/**
- *	t4vf_query_params - query FW or device parameters
- *	@adapter: the adapter
- *	@nparams: the number of parameters
- *	@params: the parameter names
- *	@vals: the parameter values
- *
- *	Reads the values of firmware or device parameters.  Up to 7 parameters
- *	can be queried at once.
- */
-int t4vf_query_params(struct adapter *adapter, unsigned int nparams,
-		      const u32 *params, u32 *vals)
-{
-	int i, ret;
-	struct fw_params_cmd cmd, rpl;
-	struct fw_params_param *p;
-	size_t len16;
-
-	if (nparams > 7)
-		return -EINVAL;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PARAMS_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_READ);
-	len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd,
-				      param[nparams].mnem), 16);
-	cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
-	for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++)
-		p->mnem = htonl(*params++);
-
-	ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (ret == 0)
-		for (i = 0, p = &rpl.param[0]; i < nparams; i++, p++)
-			*vals++ = be32_to_cpu(p->val);
-	return ret;
-}
-
-/**
- *	t4vf_set_params - sets FW or device parameters
- *	@adapter: the adapter
- *	@nparams: the number of parameters
- *	@params: the parameter names
- *	@vals: the parameter values
- *
- *	Sets the values of firmware or device parameters.  Up to 7 parameters
- *	can be specified at once.
- */
-int t4vf_set_params(struct adapter *adapter, unsigned int nparams,
-		    const u32 *params, const u32 *vals)
-{
-	int i;
-	struct fw_params_cmd cmd;
-	struct fw_params_param *p;
-	size_t len16;
-
-	if (nparams > 7)
-		return -EINVAL;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PARAMS_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_WRITE);
-	len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd,
-				      param[nparams]), 16);
-	cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
-	for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++) {
-		p->mnem = cpu_to_be32(*params++);
-		p->val = cpu_to_be32(*vals++);
-	}
-
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-}
-
-/**
- *	t4vf_get_sge_params - retrieve adapter Scatter gather Engine parameters
- *	@adapter: the adapter
- *
- *	Retrieves various core SGE parameters in the form of hardware SGE
- *	register values.  The caller is responsible for decoding these as
- *	needed.  The SGE parameters are stored in @adapter->params.sge.
- */
-int t4vf_get_sge_params(struct adapter *adapter)
-{
-	struct sge_params *sge_params = &adapter->params.sge;
-	u32 params[7], vals[7];
-	int v;
-
-	params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_CONTROL));
-	params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_HOST_PAGE_SIZE));
-	params[2] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_FL_BUFFER_SIZE0));
-	params[3] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_FL_BUFFER_SIZE1));
-	params[4] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_0_AND_1));
-	params[5] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_2_AND_3));
-	params[6] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_4_AND_5));
-	v = t4vf_query_params(adapter, 7, params, vals);
-	if (v)
-		return v;
-	sge_params->sge_control = vals[0];
-	sge_params->sge_host_page_size = vals[1];
-	sge_params->sge_fl_buffer_size[0] = vals[2];
-	sge_params->sge_fl_buffer_size[1] = vals[3];
-	sge_params->sge_timer_value_0_and_1 = vals[4];
-	sge_params->sge_timer_value_2_and_3 = vals[5];
-	sge_params->sge_timer_value_4_and_5 = vals[6];
-
-	params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
-		     FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD));
-	v = t4vf_query_params(adapter, 1, params, vals);
-	if (v)
-		return v;
-	sge_params->sge_ingress_rx_threshold = vals[0];
-
-	return 0;
-}
-
-/**
- *	t4vf_get_vpd_params - retrieve device VPD paremeters
- *	@adapter: the adapter
- *
- *	Retrives various device Vital Product Data parameters.  The parameters
- *	are stored in @adapter->params.vpd.
- */
-int t4vf_get_vpd_params(struct adapter *adapter)
-{
-	struct vpd_params *vpd_params = &adapter->params.vpd;
-	u32 params[7], vals[7];
-	int v;
-
-	params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
-		     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK));
-	v = t4vf_query_params(adapter, 1, params, vals);
-	if (v)
-		return v;
-	vpd_params->cclk = vals[0];
-
-	return 0;
-}
-
-/**
- *	t4vf_get_dev_params - retrieve device paremeters
- *	@adapter: the adapter
- *
- *	Retrives various device parameters.  The parameters are stored in
- *	@adapter->params.dev.
- */
-int t4vf_get_dev_params(struct adapter *adapter)
-{
-	struct dev_params *dev_params = &adapter->params.dev;
-	u32 params[7], vals[7];
-	int v;
-
-	params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
-		     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FWREV));
-	params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
-		     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_TPREV));
-	v = t4vf_query_params(adapter, 2, params, vals);
-	if (v)
-		return v;
-	dev_params->fwrev = vals[0];
-	dev_params->tprev = vals[1];
-
-	return 0;
-}
-
-/**
- *	t4vf_get_rss_glb_config - retrieve adapter RSS Global Configuration
- *	@adapter: the adapter
- *
- *	Retrieves global RSS mode and parameters with which we have to live
- *	and stores them in the @adapter's RSS parameters.
- */
-int t4vf_get_rss_glb_config(struct adapter *adapter)
-{
-	struct rss_params *rss = &adapter->params.rss;
-	struct fw_rss_glb_config_cmd cmd, rpl;
-	int v;
-
-	/*
-	 * Execute an RSS Global Configuration read command to retrieve
-	 * our RSS configuration.
-	 */
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) |
-				      FW_CMD_REQUEST |
-				      FW_CMD_READ);
-	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
-	v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (v)
-		return v;
-
-	/*
-	 * Transate the big-endian RSS Global Configuration into our
-	 * cpu-endian format based on the RSS mode.  We also do first level
-	 * filtering at this point to weed out modes which don't support
-	 * VF Drivers ...
-	 */
-	rss->mode = FW_RSS_GLB_CONFIG_CMD_MODE_GET(
-			be32_to_cpu(rpl.u.manual.mode_pkd));
-	switch (rss->mode) {
-	case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: {
-		u32 word = be32_to_cpu(
-				rpl.u.basicvirtual.synmapen_to_hashtoeplitz);
-
-		rss->u.basicvirtual.synmapen =
-			((word & FW_RSS_GLB_CONFIG_CMD_SYNMAPEN) != 0);
-		rss->u.basicvirtual.syn4tupenipv6 =
-			((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV6) != 0);
-		rss->u.basicvirtual.syn2tupenipv6 =
-			((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV6) != 0);
-		rss->u.basicvirtual.syn4tupenipv4 =
-			((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV4) != 0);
-		rss->u.basicvirtual.syn2tupenipv4 =
-			((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV4) != 0);
-
-		rss->u.basicvirtual.ofdmapen =
-			((word & FW_RSS_GLB_CONFIG_CMD_OFDMAPEN) != 0);
-
-		rss->u.basicvirtual.tnlmapen =
-			((word & FW_RSS_GLB_CONFIG_CMD_TNLMAPEN) != 0);
-		rss->u.basicvirtual.tnlalllookup =
-			((word  & FW_RSS_GLB_CONFIG_CMD_TNLALLLKP) != 0);
-
-		rss->u.basicvirtual.hashtoeplitz =
-			((word & FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ) != 0);
-
-		/* we need at least Tunnel Map Enable to be set */
-		if (!rss->u.basicvirtual.tnlmapen)
-			return -EINVAL;
-		break;
-	}
-
-	default:
-		/* all unknown/unsupported RSS modes result in an error */
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- *	t4vf_get_vfres - retrieve VF resource limits
- *	@adapter: the adapter
- *
- *	Retrieves configured resource limits and capabilities for a virtual
- *	function.  The results are stored in @adapter->vfres.
- */
-int t4vf_get_vfres(struct adapter *adapter)
-{
-	struct vf_resources *vfres = &adapter->params.vfres;
-	struct fw_pfvf_cmd cmd, rpl;
-	int v;
-	u32 word;
-
-	/*
-	 * Execute PFVF Read command to get VF resource limits; bail out early
-	 * with error on command failure.
-	 */
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PFVF_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_READ);
-	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
-	v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (v)
-		return v;
-
-	/*
-	 * Extract VF resource limits and return success.
-	 */
-	word = be32_to_cpu(rpl.niqflint_niq);
-	vfres->niqflint = FW_PFVF_CMD_NIQFLINT_GET(word);
-	vfres->niq = FW_PFVF_CMD_NIQ_GET(word);
-
-	word = be32_to_cpu(rpl.type_to_neq);
-	vfres->neq = FW_PFVF_CMD_NEQ_GET(word);
-	vfres->pmask = FW_PFVF_CMD_PMASK_GET(word);
-
-	word = be32_to_cpu(rpl.tc_to_nexactf);
-	vfres->tc = FW_PFVF_CMD_TC_GET(word);
-	vfres->nvi = FW_PFVF_CMD_NVI_GET(word);
-	vfres->nexactf = FW_PFVF_CMD_NEXACTF_GET(word);
-
-	word = be32_to_cpu(rpl.r_caps_to_nethctrl);
-	vfres->r_caps = FW_PFVF_CMD_R_CAPS_GET(word);
-	vfres->wx_caps = FW_PFVF_CMD_WX_CAPS_GET(word);
-	vfres->nethctrl = FW_PFVF_CMD_NETHCTRL_GET(word);
-
-	return 0;
-}
-
-/**
- *	t4vf_read_rss_vi_config - read a VI's RSS configuration
- *	@adapter: the adapter
- *	@viid: Virtual Interface ID
- *	@config: pointer to host-native VI RSS Configuration buffer
- *
- *	Reads the Virtual Interface's RSS configuration information and
- *	translates it into CPU-native format.
- */
-int t4vf_read_rss_vi_config(struct adapter *adapter, unsigned int viid,
-			    union rss_vi_config *config)
-{
-	struct fw_rss_vi_config_cmd cmd, rpl;
-	int v;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_READ |
-				     FW_RSS_VI_CONFIG_CMD_VIID(viid));
-	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
-	v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (v)
-		return v;
-
-	switch (adapter->params.rss.mode) {
-	case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: {
-		u32 word = be32_to_cpu(rpl.u.basicvirtual.defaultq_to_udpen);
-
-		config->basicvirtual.ip6fourtupen =
-			((word & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN) != 0);
-		config->basicvirtual.ip6twotupen =
-			((word & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) != 0);
-		config->basicvirtual.ip4fourtupen =
-			((word & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN) != 0);
-		config->basicvirtual.ip4twotupen =
-			((word & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) != 0);
-		config->basicvirtual.udpen =
-			((word & FW_RSS_VI_CONFIG_CMD_UDPEN) != 0);
-		config->basicvirtual.defaultq =
-			FW_RSS_VI_CONFIG_CMD_DEFAULTQ_GET(word);
-		break;
-	}
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- *	t4vf_write_rss_vi_config - write a VI's RSS configuration
- *	@adapter: the adapter
- *	@viid: Virtual Interface ID
- *	@config: pointer to host-native VI RSS Configuration buffer
- *
- *	Write the Virtual Interface's RSS configuration information
- *	(translating it into firmware-native format before writing).
- */
-int t4vf_write_rss_vi_config(struct adapter *adapter, unsigned int viid,
-			     union rss_vi_config *config)
-{
-	struct fw_rss_vi_config_cmd cmd, rpl;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     FW_RSS_VI_CONFIG_CMD_VIID(viid));
-	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
-	switch (adapter->params.rss.mode) {
-	case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: {
-		u32 word = 0;
-
-		if (config->basicvirtual.ip6fourtupen)
-			word |= FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN;
-		if (config->basicvirtual.ip6twotupen)
-			word |= FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN;
-		if (config->basicvirtual.ip4fourtupen)
-			word |= FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN;
-		if (config->basicvirtual.ip4twotupen)
-			word |= FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN;
-		if (config->basicvirtual.udpen)
-			word |= FW_RSS_VI_CONFIG_CMD_UDPEN;
-		word |= FW_RSS_VI_CONFIG_CMD_DEFAULTQ(
-				config->basicvirtual.defaultq);
-		cmd.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(word);
-		break;
-	}
-
-	default:
-		return -EINVAL;
-	}
-
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-}
-
-/**
- *	t4vf_config_rss_range - configure a portion of the RSS mapping table
- *	@adapter: the adapter
- *	@viid: Virtual Interface of RSS Table Slice
- *	@start: starting entry in the table to write
- *	@n: how many table entries to write
- *	@rspq: values for the "Response Queue" (Ingress Queue) lookup table
- *	@nrspq: number of values in @rspq
- *
- *	Programs the selected part of the VI's RSS mapping table with the
- *	provided values.  If @nrspq < @n the supplied values are used repeatedly
- *	until the full table range is populated.
- *
- *	The caller must ensure the values in @rspq are in the range 0..1023.
- */
-int t4vf_config_rss_range(struct adapter *adapter, unsigned int viid,
-			  int start, int n, const u16 *rspq, int nrspq)
-{
-	const u16 *rsp = rspq;
-	const u16 *rsp_end = rspq+nrspq;
-	struct fw_rss_ind_tbl_cmd cmd;
-
-	/*
-	 * Initialize firmware command template to write the RSS table.
-	 */
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_IND_TBL_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     FW_RSS_IND_TBL_CMD_VIID(viid));
-	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
-
-	/*
-	 * Each firmware RSS command can accommodate up to 32 RSS Ingress
-	 * Queue Identifiers.  These Ingress Queue IDs are packed three to
-	 * a 32-bit word as 10-bit values with the upper remaining 2 bits
-	 * reserved.
-	 */
-	while (n > 0) {
-		__be32 *qp = &cmd.iq0_to_iq2;
-		int nq = min(n, 32);
-		int ret;
-
-		/*
-		 * Set up the firmware RSS command header to send the next
-		 * "nq" Ingress Queue IDs to the firmware.
-		 */
-		cmd.niqid = cpu_to_be16(nq);
-		cmd.startidx = cpu_to_be16(start);
-
-		/*
-		 * "nq" more done for the start of the next loop.
-		 */
-		start += nq;
-		n -= nq;
-
-		/*
-		 * While there are still Ingress Queue IDs to stuff into the
-		 * current firmware RSS command, retrieve them from the
-		 * Ingress Queue ID array and insert them into the command.
-		 */
-		while (nq > 0) {
-			/*
-			 * Grab up to the next 3 Ingress Queue IDs (wrapping
-			 * around the Ingress Queue ID array if necessary) and
-			 * insert them into the firmware RSS command at the
-			 * current 3-tuple position within the commad.
-			 */
-			u16 qbuf[3];
-			u16 *qbp = qbuf;
-			int nqbuf = min(3, nq);
-
-			nq -= nqbuf;
-			qbuf[0] = qbuf[1] = qbuf[2] = 0;
-			while (nqbuf) {
-				nqbuf--;
-				*qbp++ = *rsp++;
-				if (rsp >= rsp_end)
-					rsp = rspq;
-			}
-			*qp++ = cpu_to_be32(FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) |
-					    FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) |
-					    FW_RSS_IND_TBL_CMD_IQ2(qbuf[2]));
-		}
-
-		/*
-		 * Send this portion of the RRS table update to the firmware;
-		 * bail out on any errors.
-		 */
-		ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-		if (ret)
-			return ret;
-	}
-	return 0;
-}
-
-/**
- *	t4vf_alloc_vi - allocate a virtual interface on a port
- *	@adapter: the adapter
- *	@port_id: physical port associated with the VI
- *
- *	Allocate a new Virtual Interface and bind it to the indicated
- *	physical port.  Return the new Virtual Interface Identifier on
- *	success, or a [negative] error number on failure.
- */
-int t4vf_alloc_vi(struct adapter *adapter, int port_id)
-{
-	struct fw_vi_cmd cmd, rpl;
-	int v;
-
-	/*
-	 * Execute a VI command to allocate Virtual Interface and return its
-	 * VIID.
-	 */
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_WRITE |
-				    FW_CMD_EXEC);
-	cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) |
-					 FW_VI_CMD_ALLOC);
-	cmd.portid_pkd = FW_VI_CMD_PORTID(port_id);
-	v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (v)
-		return v;
-
-	return FW_VI_CMD_VIID_GET(be16_to_cpu(rpl.type_viid));
-}
-
-/**
- *	t4vf_free_vi -- free a virtual interface
- *	@adapter: the adapter
- *	@viid: the virtual interface identifier
- *
- *	Free a previously allocated Virtual Interface.  Return an error on
- *	failure.
- */
-int t4vf_free_vi(struct adapter *adapter, int viid)
-{
-	struct fw_vi_cmd cmd;
-
-	/*
-	 * Execute a VI command to free the Virtual Interface.
-	 */
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_EXEC);
-	cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) |
-					 FW_VI_CMD_FREE);
-	cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID(viid));
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-}
-
-/**
- *	t4vf_enable_vi - enable/disable a virtual interface
- *	@adapter: the adapter
- *	@viid: the Virtual Interface ID
- *	@rx_en: 1=enable Rx, 0=disable Rx
- *	@tx_en: 1=enable Tx, 0=disable Tx
- *
- *	Enables/disables a virtual interface.
- */
-int t4vf_enable_vi(struct adapter *adapter, unsigned int viid,
-		   bool rx_en, bool tx_en)
-{
-	struct fw_vi_enable_cmd cmd;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_ENABLE_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_EXEC |
-				     FW_VI_ENABLE_CMD_VIID(viid));
-	cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN(rx_en) |
-				       FW_VI_ENABLE_CMD_EEN(tx_en) |
-				       FW_LEN16(cmd));
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-}
-
-/**
- *	t4vf_identify_port - identify a VI's port by blinking its LED
- *	@adapter: the adapter
- *	@viid: the Virtual Interface ID
- *	@nblinks: how many times to blink LED at 2.5 Hz
- *
- *	Identifies a VI's port by blinking its LED.
- */
-int t4vf_identify_port(struct adapter *adapter, unsigned int viid,
-		       unsigned int nblinks)
-{
-	struct fw_vi_enable_cmd cmd;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_ENABLE_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_EXEC |
-				     FW_VI_ENABLE_CMD_VIID(viid));
-	cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED |
-				       FW_LEN16(cmd));
-	cmd.blinkdur = cpu_to_be16(nblinks);
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-}
-
-/**
- *	t4vf_set_rxmode - set Rx properties of a virtual interface
- *	@adapter: the adapter
- *	@viid: the VI id
- *	@mtu: the new MTU or -1 for no change
- *	@promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
- *	@all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
- *	@bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
- *	@vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it,
- *		-1 no change
- *
- *	Sets Rx properties of a virtual interface.
- */
-int t4vf_set_rxmode(struct adapter *adapter, unsigned int viid,
-		    int mtu, int promisc, int all_multi, int bcast, int vlanex,
-		    bool sleep_ok)
-{
-	struct fw_vi_rxmode_cmd cmd;
-
-	/* convert to FW values */
-	if (mtu < 0)
-		mtu = FW_VI_RXMODE_CMD_MTU_MASK;
-	if (promisc < 0)
-		promisc = FW_VI_RXMODE_CMD_PROMISCEN_MASK;
-	if (all_multi < 0)
-		all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_MASK;
-	if (bcast < 0)
-		bcast = FW_VI_RXMODE_CMD_BROADCASTEN_MASK;
-	if (vlanex < 0)
-		vlanex = FW_VI_RXMODE_CMD_VLANEXEN_MASK;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_RXMODE_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     FW_VI_RXMODE_CMD_VIID(viid));
-	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
-	cmd.mtu_to_vlanexen =
-		cpu_to_be32(FW_VI_RXMODE_CMD_MTU(mtu) |
-			    FW_VI_RXMODE_CMD_PROMISCEN(promisc) |
-			    FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) |
-			    FW_VI_RXMODE_CMD_BROADCASTEN(bcast) |
-			    FW_VI_RXMODE_CMD_VLANEXEN(vlanex));
-	return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok);
-}
-
-/**
- *	t4vf_alloc_mac_filt - allocates exact-match filters for MAC addresses
- *	@adapter: the adapter
- *	@viid: the Virtual Interface Identifier
- *	@free: if true any existing filters for this VI id are first removed
- *	@naddr: the number of MAC addresses to allocate filters for (up to 7)
- *	@addr: the MAC address(es)
- *	@idx: where to store the index of each allocated filter
- *	@hash: pointer to hash address filter bitmap
- *	@sleep_ok: call is allowed to sleep
- *
- *	Allocates an exact-match filter for each of the supplied addresses and
- *	sets it to the corresponding address.  If @idx is not %NULL it should
- *	have at least @naddr entries, each of which will be set to the index of
- *	the filter allocated for the corresponding MAC address.  If a filter
- *	could not be allocated for an address its index is set to 0xffff.
- *	If @hash is not %NULL addresses that fail to allocate an exact filter
- *	are hashed and update the hash filter bitmap pointed at by @hash.
- *
- *	Returns a negative error number or the number of filters allocated.
- */
-int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free,
-			unsigned int naddr, const u8 **addr, u16 *idx,
-			u64 *hash, bool sleep_ok)
-{
-	int offset, ret = 0;
-	unsigned nfilters = 0;
-	unsigned int rem = naddr;
-	struct fw_vi_mac_cmd cmd, rpl;
-
-	if (naddr > FW_CLS_TCAM_NUM_ENTRIES)
-		return -EINVAL;
-
-	for (offset = 0; offset < naddr; /**/) {
-		unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact)
-					 ? rem
-					 : ARRAY_SIZE(cmd.u.exact));
-		size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
-						     u.exact[fw_naddr]), 16);
-		struct fw_vi_mac_exact *p;
-		int i;
-
-		memset(&cmd, 0, sizeof(cmd));
-		cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
-					     FW_CMD_REQUEST |
-					     FW_CMD_WRITE |
-					     (free ? FW_CMD_EXEC : 0) |
-					     FW_VI_MAC_CMD_VIID(viid));
-		cmd.freemacs_to_len16 =
-			cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
-				    FW_CMD_LEN16(len16));
-
-		for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) {
-			p->valid_to_idx = cpu_to_be16(
-				FW_VI_MAC_CMD_VALID |
-				FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
-			memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
-		}
-
-
-		ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl,
-					sleep_ok);
-		if (ret && ret != -ENOMEM)
-			break;
-
-		for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) {
-			u16 index = FW_VI_MAC_CMD_IDX_GET(
-				be16_to_cpu(p->valid_to_idx));
-
-			if (idx)
-				idx[offset+i] =
-					(index >= FW_CLS_TCAM_NUM_ENTRIES
-					 ? 0xffff
-					 : index);
-			if (index < FW_CLS_TCAM_NUM_ENTRIES)
-				nfilters++;
-			else if (hash)
-				*hash |= (1ULL << hash_mac_addr(addr[offset+i]));
-		}
-
-		free = false;
-		offset += fw_naddr;
-		rem -= fw_naddr;
-	}
-
-	/*
-	 * If there were no errors or we merely ran out of room in our MAC
-	 * address arena, return the number of filters actually written.
-	 */
-	if (ret == 0 || ret == -ENOMEM)
-		ret = nfilters;
-	return ret;
-}
-
-/**
- *	t4vf_change_mac - modifies the exact-match filter for a MAC address
- *	@adapter: the adapter
- *	@viid: the Virtual Interface ID
- *	@idx: index of existing filter for old value of MAC address, or -1
- *	@addr: the new MAC address value
- *	@persist: if idx < 0, the new MAC allocation should be persistent
- *
- *	Modifies an exact-match filter and sets it to the new MAC address.
- *	Note that in general it is not possible to modify the value of a given
- *	filter so the generic way to modify an address filter is to free the
- *	one being used by the old address value and allocate a new filter for
- *	the new address value.  @idx can be -1 if the address is a new
- *	addition.
- *
- *	Returns a negative error number or the index of the filter with the new
- *	MAC value.
- */
-int t4vf_change_mac(struct adapter *adapter, unsigned int viid,
-		    int idx, const u8 *addr, bool persist)
-{
-	int ret;
-	struct fw_vi_mac_cmd cmd, rpl;
-	struct fw_vi_mac_exact *p = &cmd.u.exact[0];
-	size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
-					     u.exact[1]), 16);
-
-	/*
-	 * If this is a new allocation, determine whether it should be
-	 * persistent (across a "freemacs" operation) or not.
-	 */
-	if (idx < 0)
-		idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     FW_VI_MAC_CMD_VIID(viid));
-	cmd.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
-	p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID |
-				      FW_VI_MAC_CMD_IDX(idx));
-	memcpy(p->macaddr, addr, sizeof(p->macaddr));
-
-	ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
-	if (ret == 0) {
-		p = &rpl.u.exact[0];
-		ret = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx));
-		if (ret >= FW_CLS_TCAM_NUM_ENTRIES)
-			ret = -ENOMEM;
-	}
-	return ret;
-}
-
-/**
- *	t4vf_set_addr_hash - program the MAC inexact-match hash filter
- *	@adapter: the adapter
- *	@viid: the Virtual Interface Identifier
- *	@ucast: whether the hash filter should also match unicast addresses
- *	@vec: the value to be written to the hash filter
- *	@sleep_ok: call is allowed to sleep
- *
- *	Sets the 64-bit inexact-match hash filter for a virtual interface.
- */
-int t4vf_set_addr_hash(struct adapter *adapter, unsigned int viid,
-		       bool ucast, u64 vec, bool sleep_ok)
-{
-	struct fw_vi_mac_cmd cmd;
-	size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
-					     u.exact[0]), 16);
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     FW_VI_ENABLE_CMD_VIID(viid));
-	cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN |
-					    FW_VI_MAC_CMD_HASHUNIEN(ucast) |
-					    FW_CMD_LEN16(len16));
-	cmd.u.hash.hashvec = cpu_to_be64(vec);
-	return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok);
-}
-
-/**
- *	t4vf_get_port_stats - collect "port" statistics
- *	@adapter: the adapter
- *	@pidx: the port index
- *	@s: the stats structure to fill
- *
- *	Collect statistics for the "port"'s Virtual Interface.
- */
-int t4vf_get_port_stats(struct adapter *adapter, int pidx,
-			struct t4vf_port_stats *s)
-{
-	struct port_info *pi = adap2pinfo(adapter, pidx);
-	struct fw_vi_stats_vf fwstats;
-	unsigned int rem = VI_VF_NUM_STATS;
-	__be64 *fwsp = (__be64 *)&fwstats;
-
-	/*
-	 * Grab the Virtual Interface statistics a chunk at a time via mailbox
-	 * commands.  We could use a Work Request and get all of them at once
-	 * but that's an asynchronous interface which is awkward to use.
-	 */
-	while (rem) {
-		unsigned int ix = VI_VF_NUM_STATS - rem;
-		unsigned int nstats = min(6U, rem);
-		struct fw_vi_stats_cmd cmd, rpl;
-		size_t len = (offsetof(struct fw_vi_stats_cmd, u) +
-			      sizeof(struct fw_vi_stats_ctl));
-		size_t len16 = DIV_ROUND_UP(len, 16);
-		int ret;
-
-		memset(&cmd, 0, sizeof(cmd));
-		cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_STATS_CMD) |
-					     FW_VI_STATS_CMD_VIID(pi->viid) |
-					     FW_CMD_REQUEST |
-					     FW_CMD_READ);
-		cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
-		cmd.u.ctl.nstats_ix =
-			cpu_to_be16(FW_VI_STATS_CMD_IX(ix) |
-				    FW_VI_STATS_CMD_NSTATS(nstats));
-		ret = t4vf_wr_mbox_ns(adapter, &cmd, len, &rpl);
-		if (ret)
-			return ret;
-
-		memcpy(fwsp, &rpl.u.ctl.stat0, sizeof(__be64) * nstats);
-
-		rem -= nstats;
-		fwsp += nstats;
-	}
-
-	/*
-	 * Translate firmware statistics into host native statistics.
-	 */
-	s->tx_bcast_bytes = be64_to_cpu(fwstats.tx_bcast_bytes);
-	s->tx_bcast_frames = be64_to_cpu(fwstats.tx_bcast_frames);
-	s->tx_mcast_bytes = be64_to_cpu(fwstats.tx_mcast_bytes);
-	s->tx_mcast_frames = be64_to_cpu(fwstats.tx_mcast_frames);
-	s->tx_ucast_bytes = be64_to_cpu(fwstats.tx_ucast_bytes);
-	s->tx_ucast_frames = be64_to_cpu(fwstats.tx_ucast_frames);
-	s->tx_drop_frames = be64_to_cpu(fwstats.tx_drop_frames);
-	s->tx_offload_bytes = be64_to_cpu(fwstats.tx_offload_bytes);
-	s->tx_offload_frames = be64_to_cpu(fwstats.tx_offload_frames);
-
-	s->rx_bcast_bytes = be64_to_cpu(fwstats.rx_bcast_bytes);
-	s->rx_bcast_frames = be64_to_cpu(fwstats.rx_bcast_frames);
-	s->rx_mcast_bytes = be64_to_cpu(fwstats.rx_mcast_bytes);
-	s->rx_mcast_frames = be64_to_cpu(fwstats.rx_mcast_frames);
-	s->rx_ucast_bytes = be64_to_cpu(fwstats.rx_ucast_bytes);
-	s->rx_ucast_frames = be64_to_cpu(fwstats.rx_ucast_frames);
-
-	s->rx_err_frames = be64_to_cpu(fwstats.rx_err_frames);
-
-	return 0;
-}
-
-/**
- *	t4vf_iq_free - free an ingress queue and its free lists
- *	@adapter: the adapter
- *	@iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
- *	@iqid: ingress queue ID
- *	@fl0id: FL0 queue ID or 0xffff if no attached FL0
- *	@fl1id: FL1 queue ID or 0xffff if no attached FL1
- *
- *	Frees an ingress queue and its associated free lists, if any.
- */
-int t4vf_iq_free(struct adapter *adapter, unsigned int iqtype,
-		 unsigned int iqid, unsigned int fl0id, unsigned int fl1id)
-{
-	struct fw_iq_cmd cmd;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_IQ_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_EXEC);
-	cmd.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE |
-					 FW_LEN16(cmd));
-	cmd.type_to_iqandstindex =
-		cpu_to_be32(FW_IQ_CMD_TYPE(iqtype));
-
-	cmd.iqid = cpu_to_be16(iqid);
-	cmd.fl0id = cpu_to_be16(fl0id);
-	cmd.fl1id = cpu_to_be16(fl1id);
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-}
-
-/**
- *	t4vf_eth_eq_free - free an Ethernet egress queue
- *	@adapter: the adapter
- *	@eqid: egress queue ID
- *
- *	Frees an Ethernet egress queue.
- */
-int t4vf_eth_eq_free(struct adapter *adapter, unsigned int eqid)
-{
-	struct fw_eq_eth_cmd cmd;
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_EQ_ETH_CMD) |
-				    FW_CMD_REQUEST |
-				    FW_CMD_EXEC);
-	cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE |
-					 FW_LEN16(cmd));
-	cmd.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID(eqid));
-	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
-}
-
-/**
- *	t4vf_handle_fw_rpl - process a firmware reply message
- *	@adapter: the adapter
- *	@rpl: start of the firmware message
- *
- *	Processes a firmware message, such as link state change messages.
- */
-int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
-{
-	const struct fw_cmd_hdr *cmd_hdr = (const struct fw_cmd_hdr *)rpl;
-	u8 opcode = FW_CMD_OP_GET(be32_to_cpu(cmd_hdr->hi));
-
-	switch (opcode) {
-	case FW_PORT_CMD: {
-		/*
-		 * Link/module state change message.
-		 */
-		const struct fw_port_cmd *port_cmd =
-			(const struct fw_port_cmd *)rpl;
-		u32 word;
-		int action, port_id, link_ok, speed, fc, pidx;
-
-		/*
-		 * Extract various fields from port status change message.
-		 */
-		action = FW_PORT_CMD_ACTION_GET(
-			be32_to_cpu(port_cmd->action_to_len16));
-		if (action != FW_PORT_ACTION_GET_PORT_INFO) {
-			dev_err(adapter->pdev_dev,
-				"Unknown firmware PORT reply action %x\n",
-				action);
-			break;
-		}
-
-		port_id = FW_PORT_CMD_PORTID_GET(
-			be32_to_cpu(port_cmd->op_to_portid));
-
-		word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype);
-		link_ok = (word & FW_PORT_CMD_LSTATUS) != 0;
-		speed = 0;
-		fc = 0;
-		if (word & FW_PORT_CMD_RXPAUSE)
-			fc |= PAUSE_RX;
-		if (word & FW_PORT_CMD_TXPAUSE)
-			fc |= PAUSE_TX;
-		if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
-			speed = SPEED_100;
-		else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
-			speed = SPEED_1000;
-		else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
-			speed = SPEED_10000;
-
-		/*
-		 * Scan all of our "ports" (Virtual Interfaces) looking for
-		 * those bound to the physical port which has changed.  If
-		 * our recorded state doesn't match the current state,
-		 * signal that change to the OS code.
-		 */
-		for_each_port(adapter, pidx) {
-			struct port_info *pi = adap2pinfo(adapter, pidx);
-			struct link_config *lc;
-
-			if (pi->port_id != port_id)
-				continue;
-
-			lc = &pi->link_cfg;
-			if (link_ok != lc->link_ok || speed != lc->speed ||
-			    fc != lc->fc) {
-				/* something changed */
-				lc->link_ok = link_ok;
-				lc->speed = speed;
-				lc->fc = fc;
-				t4vf_os_link_changed(adapter, pidx, link_ok);
-			}
-		}
-		break;
-	}
-
-	default:
-		dev_err(adapter->pdev_dev, "Unknown firmware reply %X\n",
-			opcode);
-	}
-	return 0;
-}