Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

136 files changed, 56047 insertions, 0 deletions

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
new file mode 100644
index 000000000000..027054dea032
--- /dev/null
+++ b/drivers/mtd/Kconfig
@@ -0,0 +1,265 @@
+# $Id: Kconfig,v 1.7 2004/11/22 11:33:56 ijc Exp $
+
+menu "Memory Technology Devices (MTD)"
+
+config MTD
+	tristate "Memory Technology Device (MTD) support"
+	help
+	  Memory Technology Devices are flash, RAM and similar chips, often
+	  used for solid state file systems on embedded devices. This option
+	  will provide the generic support for MTD drivers to register
+	  themselves with the kernel and for potential users of MTD devices
+	  to enumerate the devices which are present and obtain a handle on
+	  them. It will also allow you to select individual drivers for 
+	  particular hardware and users of MTD devices. If unsure, say N.
+
+config MTD_DEBUG
+	bool "Debugging"
+	depends on MTD
+	help
+	  This turns on low-level debugging for the entire MTD sub-system.
+	  Normally, you should say 'N'.
+
+config MTD_DEBUG_VERBOSE
+	int "Debugging verbosity (0 = quiet, 3 = noisy)"
+	depends on MTD_DEBUG
+	default "0"
+	help
+	  Determines the verbosity level of the MTD debugging messages.
+
+config MTD_CONCAT
+	tristate "MTD concatenating support"
+	depends on MTD
+	help
+	  Support for concatenating several MTD devices into a single
+	  (virtual) one. This allows you to have -for example- a JFFS(2)
+	  file system spanning multiple physical flash chips. If unsure,
+	  say 'Y'.
+
+config MTD_PARTITIONS
+	bool "MTD partitioning support"
+	depends on MTD
+	help
+	  If you have a device which needs to divide its flash chip(s) up
+	  into multiple 'partitions', each of which appears to the user as
+	  a separate MTD device, you require this option to be enabled. If
+	  unsure, say 'Y'.
+
+	  Note, however, that you don't need this option for the DiskOnChip
+	  devices. Partitioning on NFTL 'devices' is a different - that's the
+	  'normal' form of partitioning used on a block device.
+
+config MTD_REDBOOT_PARTS
+	tristate "RedBoot partition table parsing"
+	depends on MTD_PARTITIONS
+	---help---
+	  RedBoot is a ROM monitor and bootloader which deals with multiple
+	  'images' in flash devices by putting a table one of the erase
+	  blocks on the device, similar to a partition table, which gives
+	  the offsets, lengths and names of all the images stored in the
+	  flash.
+
+	  If you need code which can detect and parse this table, and register
+	  MTD 'partitions' corresponding to each image in the table, enable
+	  this option. 
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The 
+	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 
+	  example.
+
+config MTD_REDBOOT_DIRECTORY_BLOCK
+	int "Location of RedBoot partition table"
+	depends on MTD_REDBOOT_PARTS
+	default "-1"
+	---help---
+	  This option is the Linux counterpart to the
+	  CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
+	  option.
+
+	  The option specifies which Flash sectors holds the RedBoot
+	  partition table.  A zero or positive value gives an absolete
+	  erase block number. A negative value specifies a number of
+	  sectors before the end of the device.
+	  
+	  For example "2" means block number 2, "-1" means the last
+	  block and "-2" means the penultimate block.
+	  
+config MTD_REDBOOT_PARTS_UNALLOCATED
+	bool "  Include unallocated flash regions"
+	depends on MTD_REDBOOT_PARTS
+	help
+	  If you need to register each unallocated flash region as a MTD
+	  'partition', enable this option.
+
+config MTD_REDBOOT_PARTS_READONLY
+	bool "  Force read-only for RedBoot system images"
+	depends on MTD_REDBOOT_PARTS
+	help
+	  If you need to force read-only for 'RedBoot', 'RedBoot Config' and
+	  'FIS directory' images, enable this option.
+
+config MTD_CMDLINE_PARTS
+	bool "Command line partition table parsing"
+	depends on MTD_PARTITIONS = "y"
+	---help---
+	  Allow generic configuration of the MTD paritition tables via the kernel
+	  command line. Multiple flash resources are supported for hardware where
+	  different kinds of flash memory are available. 
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The 
+	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 
+	  example.
+
+	  The format for the command line is as follows:
+
+	  mtdparts=<mtddef>[;<mtddef]
+	  <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
+	  <partdef> := <size>[@offset][<name>][ro]
+	  <mtd-id>  := unique id used in mapping driver/device
+	  <size>    := standard linux memsize OR "-" to denote all 
+	  remaining space
+	  <name>    := (NAME)
+
+	  Due to the way Linux handles the command line, no spaces are 
+	  allowed in the partition definition, including mtd id's and partition 
+	  names.
+
+	  Examples:
+
+	  1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
+	  mtdparts=sa1100:-
+
+	  Same flash, but 2 named partitions, the first one being read-only:
+	  mtdparts=sa1100:256k(ARMboot)ro,-(root)
+
+	  If unsure, say 'N'.
+
+config MTD_AFS_PARTS
+	tristate "ARM Firmware Suite partition parsing"
+	depends on ARM && MTD_PARTITIONS
+	---help---
+	  The ARM Firmware Suite allows the user to divide flash devices into
+	  multiple 'images'. Each such image has a header containing its name
+	  and offset/size etc.
+
+	  If you need code which can detect and parse these tables, and
+	  register MTD 'partitions' corresponding to each image detected,
+	  enable this option.
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The
+	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+
+comment "User Modules And Translation Layers"
+	depends on MTD
+
+config MTD_CHAR
+	tristate "Direct char device access to MTD devices"
+	depends on MTD
+	help
+	  This provides a character device for each MTD device present in
+	  the system, allowing the user to read and write directly to the
+	  memory chips, and also use ioctl() to obtain information about
+	  the device, or to erase parts of it.
+
+config MTD_BLOCK
+	tristate "Caching block device access to MTD devices"
+	depends on MTD
+	---help---
+	  Although most flash chips have an erase size too large to be useful
+	  as block devices, it is possible to use MTD devices which are based
+	  on RAM chips in this manner. This block device is a user of MTD
+	  devices performing that function.
+
+	  At the moment, it is also required for the Journalling Flash File
+	  System(s) to obtain a handle on the MTD device when it's mounted
+	  (although JFFS and JFFS2 don't actually use any of the functionality
+	  of the mtdblock device).
+
+	  Later, it may be extended to perform read/erase/modify/write cycles
+	  on flash chips to emulate a smaller block size. Needless to say,
+	  this is very unsafe, but could be useful for file systems which are
+	  almost never written to.
+
+	  You do not need this option for use with the DiskOnChip devices. For
+	  those, enable NFTL support (CONFIG_NFTL) instead.
+
+config MTD_BLOCK_RO
+	tristate "Readonly block device access to MTD devices"
+	depends on MTD_BLOCK!=y && MTD
+	help
+	  This allows you to mount read-only file systems (such as cramfs)
+	  from an MTD device, without the overhead (and danger) of the caching
+	  driver.
+
+	  You do not need this option for use with the DiskOnChip devices. For
+	  those, enable NFTL support (CONFIG_NFTL) instead.
+
+config FTL
+	tristate "FTL (Flash Translation Layer) support"
+	depends on MTD
+	---help---
+	  This provides support for the original Flash Translation Layer which
+	  is part of the PCMCIA specification. It uses a kind of pseudo-
+	  file system on a flash device to emulate a block device with
+	  512-byte sectors, on top of which you put a 'normal' file system.
+
+	  You may find that the algorithms used in this code are patented
+	  unless you live in the Free World where software patents aren't
+	  legal - in the USA you are only permitted to use this on PCMCIA
+	  hardware, although under the terms of the GPL you're obviously
+	  permitted to copy, modify and distribute the code as you wish. Just
+	  not use it.
+
+config NFTL
+	tristate "NFTL (NAND Flash Translation Layer) support"
+	depends on MTD
+	---help---
+	  This provides support for the NAND Flash Translation Layer which is
+	  used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
+	  file system on a flash device to emulate a block device with
+	  512-byte sectors, on top of which you put a 'normal' file system.
+
+	  You may find that the algorithms used in this code are patented
+	  unless you live in the Free World where software patents aren't
+	  legal - in the USA you are only permitted to use this on DiskOnChip
+	  hardware, although under the terms of the GPL you're obviously
+	  permitted to copy, modify and distribute the code as you wish. Just
+	  not use it.
+
+config NFTL_RW
+	bool "Write support for NFTL"
+	depends on NFTL
+	help
+	  Support for writing to the NAND Flash Translation Layer, as used
+	  on the DiskOnChip.
+
+config INFTL
+	tristate "INFTL (Inverse NAND Flash Translation Layer) support"
+	depends on MTD
+	---help---
+	  This provides support for the Inverse NAND Flash Translation 
+	  Layer which is used on M-Systems' newer DiskOnChip devices. It
+	  uses a kind of pseudo-file system on a flash device to emulate
+	  a block device with 512-byte sectors, on top of which you put
+	  a 'normal' file system.
+
+	  You may find that the algorithms used in this code are patented
+	  unless you live in the Free World where software patents aren't
+	  legal - in the USA you are only permitted to use this on DiskOnChip
+	  hardware, although under the terms of the GPL you're obviously
+	  permitted to copy, modify and distribute the code as you wish. Just
+	  not use it.
+
+source "drivers/mtd/chips/Kconfig"
+
+source "drivers/mtd/maps/Kconfig"
+
+source "drivers/mtd/devices/Kconfig"
+
+source "drivers/mtd/nand/Kconfig"
+
+endmenu
+
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
new file mode 100644
index 000000000000..e4ad588327f7
--- /dev/null
+++ b/drivers/mtd/Makefile
@@ -0,0 +1,27 @@
+#
+# Makefile for the memory technology device drivers.
+#
+# $Id: Makefile.common,v 1.5 2004/08/10 20:51:49 dwmw2 Exp $
+
+# Core functionality.
+mtd-y				:= mtdcore.o
+mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
+obj-$(CONFIG_MTD)		+= $(mtd-y)
+
+obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
+obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+
+# 'Users' - code which presents functionality to userspace.
+obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
+obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o mtd_blkdevs.o
+obj-$(CONFIG_MTD_BLOCK_RO)	+= mtdblock_ro.o mtd_blkdevs.o
+obj-$(CONFIG_FTL)		+= ftl.o mtd_blkdevs.o
+obj-$(CONFIG_NFTL)		+= nftl.o mtd_blkdevs.o
+obj-$(CONFIG_INFTL)		+= inftl.o mtd_blkdevs.o
+
+nftl-objs		:= nftlcore.o nftlmount.o
+inftl-objs		:= inftlcore.o inftlmount.o
+
+obj-y		+= chips/ maps/ devices/ nand/
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
new file mode 100644
index 000000000000..801e6c7d0892
--- /dev/null
+++ b/drivers/mtd/afs.c
@@ -0,0 +1,296 @@
+/*======================================================================
+
+    drivers/mtd/afs.c: ARM Flash Layout/Partitioning
+  
+    Copyright (C) 2000 ARM Limited
+  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+  
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+  
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+  
+   This is access code for flashes using ARM's flash partitioning 
+   standards.
+
+   $Id: afs.c,v 1.13 2004/02/27 22:09:59 rmk Exp $
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+struct footer_struct {
+	u32 image_info_base;	/* Address of first word of ImageFooter  */
+	u32 image_start;	/* Start of area reserved by this footer */
+	u32 signature;		/* 'Magic' number proves it's a footer   */
+	u32 type;		/* Area type: ARM Image, SIB, customer   */
+	u32 checksum;		/* Just this structure                   */
+};
+
+struct image_info_struct {
+	u32 bootFlags;		/* Boot flags, compression etc.          */
+	u32 imageNumber;	/* Unique number, selects for boot etc.  */
+	u32 loadAddress;	/* Address program should be loaded to   */
+	u32 length;		/* Actual size of image                  */
+	u32 address;		/* Image is executed from here           */
+	char name[16];		/* Null terminated                       */
+	u32 headerBase;		/* Flash Address of any stripped header  */
+	u32 header_length;	/* Length of header in memory            */
+	u32 headerType;		/* AIF, RLF, s-record etc.               */
+	u32 checksum;		/* Image checksum (inc. this struct)     */
+};
+
+static u32 word_sum(void *words, int num)
+{
+	u32 *p = words;
+	u32 sum = 0;
+
+	while (num--)
+		sum += *p++;
+
+	return sum;
+}
+
+static int
+afs_read_footer(struct mtd_info *mtd, u_int *img_start, u_int *iis_start,
+		u_int off, u_int mask)
+{
+	struct footer_struct fs;
+	u_int ptr = off + mtd->erasesize - sizeof(fs);
+	size_t sz;
+	int ret;
+
+	ret = mtd->read(mtd, ptr, sizeof(fs), &sz, (u_char *) &fs);
+	if (ret >= 0 && sz != sizeof(fs))
+		ret = -EINVAL;
+
+	if (ret < 0) {
+		printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
+			ptr, ret);
+		return ret;
+	}
+
+	ret = 1;
+
+	/*
+	 * Does it contain the magic number?
+	 */
+	if (fs.signature != 0xa0ffff9f)
+		ret = 0;
+
+	/*
+	 * Check the checksum.
+	 */
+	if (word_sum(&fs, sizeof(fs) / sizeof(u32)) != 0xffffffff)
+		ret = 0;
+
+	/*
+	 * Don't touch the SIB.
+	 */
+	if (fs.type == 2)
+		ret = 0;
+
+	*iis_start = fs.image_info_base & mask;
+	*img_start = fs.image_start & mask;
+
+	/*
+	 * Check the image info base.  This can not
+	 * be located after the footer structure.
+	 */
+	if (*iis_start >= ptr)
+		ret = 0;
+
+	/*
+	 * Check the start of this image.  The image
+	 * data can not be located after this block.
+	 */
+	if (*img_start > off)
+		ret = 0;
+
+	return ret;
+}
+
+static int
+afs_read_iis(struct mtd_info *mtd, struct image_info_struct *iis, u_int ptr)
+{
+	size_t sz;
+	int ret, i;
+
+	memset(iis, 0, sizeof(*iis));
+	ret = mtd->read(mtd, ptr, sizeof(*iis), &sz, (u_char *) iis);
+	if (ret < 0)
+		goto failed;
+
+	if (sz != sizeof(*iis)) {
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	ret = 0;
+
+	/*
+	 * Validate the name - it must be NUL terminated.
+	 */
+	for (i = 0; i < sizeof(iis->name); i++)
+		if (iis->name[i] == '\0')
+			break;
+
+	if (i < sizeof(iis->name))
+		ret = 1;
+
+	return ret;
+
+ failed:
+	printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
+		ptr, ret);
+	return ret;
+}
+
+static int parse_afs_partitions(struct mtd_info *mtd, 
+                         struct mtd_partition **pparts,
+                         unsigned long origin)
+{
+	struct mtd_partition *parts;
+	u_int mask, off, idx, sz;
+	int ret = 0;
+	char *str;
+
+	/*
+	 * This is the address mask; we use this to mask off out of
+	 * range address bits.
+	 */
+	mask = mtd->size - 1;
+
+	/*
+	 * First, calculate the size of the array we need for the
+	 * partition information.  We include in this the size of
+	 * the strings.
+	 */
+	for (idx = off = sz = 0; off < mtd->size; off += mtd->erasesize) {
+		struct image_info_struct iis;
+		u_int iis_ptr, img_ptr;
+
+		ret = afs_read_footer(mtd, &img_ptr, &iis_ptr, off, mask);
+		if (ret < 0)
+			break;
+		if (ret == 0)
+			continue;
+
+		ret = afs_read_iis(mtd, &iis, iis_ptr);
+		if (ret < 0)
+			break;
+		if (ret == 0)
+			continue;
+
+		sz += sizeof(struct mtd_partition);
+		sz += strlen(iis.name) + 1;
+		idx += 1;
+	}
+
+	if (!sz)
+		return ret;
+
+	parts = kmalloc(sz, GFP_KERNEL);
+	if (!parts)
+		return -ENOMEM;
+
+	memset(parts, 0, sz);
+	str = (char *)(parts + idx);
+
+	/*
+	 * Identify the partitions
+	 */
+	for (idx = off = 0; off < mtd->size; off += mtd->erasesize) {
+		struct image_info_struct iis;
+		u_int iis_ptr, img_ptr, size;
+
+		/* Read the footer. */
+		ret = afs_read_footer(mtd, &img_ptr, &iis_ptr, off, mask);
+		if (ret < 0)
+			break;
+		if (ret == 0)
+			continue;
+
+		/* Read the image info block */
+		ret = afs_read_iis(mtd, &iis, iis_ptr);
+		if (ret < 0)
+			break;
+		if (ret == 0)
+			continue;
+
+		strcpy(str, iis.name);
+		size = mtd->erasesize + off - img_ptr;
+
+		/*
+		 * In order to support JFFS2 partitions on this layout,
+		 * we must lie to MTD about the real size of JFFS2
+		 * partitions; this ensures that the AFS flash footer
+		 * won't be erased by JFFS2.  Please ensure that your
+		 * JFFS2 partitions are given image numbers between
+		 * 1000 and 2000 inclusive.
+		 */
+		if (iis.imageNumber >= 1000 && iis.imageNumber < 2000)
+			size -= mtd->erasesize;
+
+		parts[idx].name		= str;
+		parts[idx].size		= size;
+		parts[idx].offset	= img_ptr;
+		parts[idx].mask_flags	= 0;
+
+		printk("  mtd%d: at 0x%08x, %5dKB, %8u, %s\n",
+			idx, img_ptr, parts[idx].size / 1024,
+			iis.imageNumber, str);
+
+		idx += 1;
+		str = str + strlen(iis.name) + 1;
+	}
+
+	if (!idx) {
+		kfree(parts);
+		parts = NULL;
+	}
+
+	*pparts = parts;
+	return idx ? idx : ret;
+}
+
+static struct mtd_part_parser afs_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_afs_partitions,
+	.name = "afs",
+};
+
+static int __init afs_parser_init(void)
+{
+	return register_mtd_parser(&afs_parser);
+}
+
+static void __exit afs_parser_exit(void)
+{
+	deregister_mtd_parser(&afs_parser);
+}
+
+module_init(afs_parser_init);
+module_exit(afs_parser_exit);
+
+
+MODULE_AUTHOR("ARM Ltd");
+MODULE_DESCRIPTION("ARM Firmware Suite partition parser");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
new file mode 100644
index 000000000000..d682dbc8157e
--- /dev/null
+++ b/drivers/mtd/chips/Kconfig
@@ -0,0 +1,286 @@
+# drivers/mtd/chips/Kconfig
+# $Id: Kconfig,v 1.13 2004/12/01 15:49:10 nico Exp $
+
+menu "RAM/ROM/Flash chip drivers"
+	depends on MTD!=n
+
+config MTD_CFI
+	tristate "Detect flash chips by Common Flash Interface (CFI) probe"
+	depends on MTD
+	select MTD_GEN_PROBE
+	help
+	  The Common Flash Interface specification was developed by Intel,
+	  AMD and other flash manufactures that provides a universal method
+	  for probing the capabilities of flash devices. If you wish to
+	  support any device that is CFI-compliant, you need to enable this
+	  option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
+	  for more information on CFI.
+
+config MTD_JEDECPROBE
+	tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
+	depends on MTD
+	select MTD_GEN_PROBE
+	help
+	  This option enables JEDEC-style probing of flash chips which are not
+	  compatible with the Common Flash Interface, but will use the common
+	  CFI-targetted flash drivers for any chips which are identified which
+	  are in fact compatible in all but the probe method. This actually
+	  covers most AMD/Fujitsu-compatible chips, and will shortly cover also
+	  non-CFI Intel chips (that code is in MTD CVS and should shortly be sent
+	  for inclusion in Linus' tree)
+
+config MTD_GEN_PROBE
+	tristate
+
+config MTD_CFI_ADV_OPTIONS
+	bool "Flash chip driver advanced configuration options"
+	depends on MTD_GEN_PROBE
+	help
+	  If you need to specify a specific endianness for access to flash
+	  chips, or if you wish to reduce the size of the kernel by including
+	  support for only specific arrangements of flash chips, say 'Y'. This
+	  option does not directly affect the code, but will enable other 
+	  configuration options which allow you to do so.
+
+	  If unsure, say 'N'.
+
+choice
+	prompt "Flash cmd/query data swapping"
+	depends on MTD_CFI_ADV_OPTIONS
+	default MTD_CFI_NOSWAP
+
+config MTD_CFI_NOSWAP
+	bool "NO"
+	---help---
+	  This option defines the way in which the CPU attempts to arrange
+	  data bits when writing the 'magic' commands to the chips. Saying
+	  'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't
+	  enabled, means that the CPU will not do any swapping; the chips
+	  are expected to be wired to the CPU in 'host-endian' form. 
+	  Specific arrangements are possible with the BIG_ENDIAN_BYTE and
+	  LITTLE_ENDIAN_BYTE, if the bytes are reversed.
+
+	  If you have a LART, on which the data (and address) lines were
+	  connected in a fashion which ensured that the nets were as short
+	  as possible, resulting in a bit-shuffling which seems utterly
+	  random to the untrained eye, you need the LART_ENDIAN_BYTE option.
+
+	  Yes, there really exists something sicker than PDP-endian :)
+
+config MTD_CFI_BE_BYTE_SWAP
+	bool "BIG_ENDIAN_BYTE"
+
+config MTD_CFI_LE_BYTE_SWAP
+	bool "LITTLE_ENDIAN_BYTE"
+
+endchoice
+
+config MTD_CFI_GEOMETRY
+	bool "Specific CFI Flash geometry selection"
+	depends on MTD_CFI_ADV_OPTIONS
+	help
+	  This option does not affect the code directly, but will enable 
+	  some other configuration options which would allow you to reduce
+	  the size of the kernel by including support for only certain 
+	  arrangements of CFI chips. If unsure, say 'N' and all options 
+	  which are supported by the current code will be enabled.
+
+config MTD_MAP_BANK_WIDTH_1
+	bool "Support  8-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  8 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_2
+	bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  16 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_4
+	bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  32 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_8
+	bool "Support 64-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  64 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_16
+	bool "Support 128-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  128 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_32
+	bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  256 bits wide, say 'Y'.
+
+config MTD_CFI_I1
+	bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If your flash chips are not interleaved - i.e. you only have one
+	  flash chip addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I2
+	bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If your flash chips are interleaved in pairs - i.e. you have two
+	  flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I4
+	bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If your flash chips are interleaved in fours - i.e. you have four
+	  flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I8
+	bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If your flash chips are interleaved in eights - i.e. you have eight
+	  flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_INTELEXT
+	tristate "Support for Intel/Sharp flash chips"
+	depends on MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  The Common Flash Interface defines a number of different command
+	  sets which a CFI-compliant chip may claim to implement. This code
+	  provides support for one of those command sets, used on Intel
+	  StrataFlash and other parts.
+
+config MTD_CFI_AMDSTD
+	tristate "Support for AMD/Fujitsu flash chips"
+	depends on MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  The Common Flash Interface defines a number of different command
+	  sets which a CFI-compliant chip may claim to implement. This code
+	  provides support for one of those command sets, used on chips 
+	  including the AMD Am29LV320.
+
+config MTD_CFI_AMDSTD_RETRY
+	int "Retry failed commands (erase/program)"
+	depends on MTD_CFI_AMDSTD
+	default "0"
+	help
+	  Some chips, when attached to a shared bus, don't properly filter
+	  bus traffic that is destined to other devices.  This broken
+	  behavior causes erase and program sequences to be aborted when
+	  the sequences are mixed with traffic for other devices.
+
+	  SST49LF040 (and related) chips are know to be broken.
+
+config MTD_CFI_AMDSTD_RETRY_MAX
+	int "Max retries of failed commands (erase/program)"
+	depends on MTD_CFI_AMDSTD_RETRY
+	default "0"
+	help
+	  If you have an SST49LF040 (or related chip) then this value should
+	  be set to at least 1.  This can also be adjusted at driver load
+	  time with the retry_cmd_max module parameter.
+
+config MTD_CFI_STAA
+	tristate "Support for ST (Advanced Architecture) flash chips"
+	depends on MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  The Common Flash Interface defines a number of different command
+	  sets which a CFI-compliant chip may claim to implement. This code
+	  provides support for one of those command sets.
+
+config MTD_CFI_UTIL
+	tristate
+
+config MTD_RAM
+	tristate "Support for RAM chips in bus mapping"
+	depends on MTD
+	help
+	  This option enables basic support for RAM chips accessed through 
+	  a bus mapping driver.
+
+config MTD_ROM
+	tristate "Support for ROM chips in bus mapping"
+	depends on MTD
+	help
+	  This option enables basic support for ROM chips accessed through 
+	  a bus mapping driver.
+
+config MTD_ABSENT
+	tristate "Support for absent chips in bus mapping"
+	depends on MTD
+	help
+	  This option enables support for a dummy probing driver used to
+	  allocated placeholder MTD devices on systems that have socketed
+	  or removable media.  Use of this driver as a fallback chip probe
+	  preserves the expected registration order of MTD device nodes on
+	  the system regardless of media presence.  Device nodes created
+	  with this driver will return -ENODEV upon access.
+
+config MTD_OBSOLETE_CHIPS
+	depends on MTD && BROKEN
+	bool "Older (theoretically obsoleted now) drivers for non-CFI chips"
+	help
+	  This option does not enable any code directly, but will allow you to
+	  select some other chip drivers which are now considered obsolete,
+	  because the generic CONFIG_JEDECPROBE code above should now detect
+	  the chips which are supported by these drivers, and allow the generic
+	  CFI-compatible drivers to drive the chips. Say 'N' here unless you have
+	  already tried the CONFIG_JEDECPROBE method and reported its failure
+	  to the MTD mailing list at <linux-mtd@lists.infradead.org>
+
+config MTD_AMDSTD
+	tristate "AMD compatible flash chip support (non-CFI)"
+	depends on MTD && MTD_OBSOLETE_CHIPS
+	help
+	  This option enables support for flash chips using AMD-compatible
+	  commands, including some which are not CFI-compatible and hence 
+	  cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
+
+	  It also works on AMD compatible chips that do conform to CFI.
+
+config MTD_SHARP
+	tristate "pre-CFI Sharp chip support"
+	depends on MTD && MTD_OBSOLETE_CHIPS
+	help
+	  This option enables support for flash chips using Sharp-compatible
+	  commands, including some which are not CFI-compatible and hence 
+	  cannot be used with the CONFIG_MTD_CFI_INTELxxx options.
+
+config MTD_JEDEC
+	tristate "JEDEC device support"
+	depends on MTD && MTD_OBSOLETE_CHIPS
+	help
+	  Enable older older JEDEC flash interface devices for self
+	  programming flash.  It is commonly used in older AMD chips.  It is
+	  only called JEDEC because the JEDEC association
+	  <http://www.jedec.org/> distributes the identification codes for the
+	  chips.
+
+config MTD_XIP
+	bool "XIP aware MTD support"
+	depends on !SMP && MTD_CFI_INTELEXT && EXPERIMENTAL
+	default y if XIP_KERNEL
+	help
+	  This allows MTD support to work with flash memory which is also
+	  used for XIP purposes.  If you're not sure what this is all about
+	  then say N.
+
+endmenu
+
diff --git a/drivers/mtd/chips/Makefile b/drivers/mtd/chips/Makefile
new file mode 100644
index 000000000000..6830489828c6
--- /dev/null
+++ b/drivers/mtd/chips/Makefile
@@ -0,0 +1,26 @@
+#
+# linux/drivers/chips/Makefile
+#
+# $Id: Makefile.common,v 1.4 2004/07/12 16:07:30 dwmw2 Exp $
+
+#                       *** BIG UGLY NOTE ***
+#
+# The removal of get_module_symbol() and replacement with
+# inter_module_register() et al has introduced a link order dependency
+# here where previously there was none.  We now have to ensure that
+# the CFI command set drivers are linked before gen_probe.o
+
+obj-$(CONFIG_MTD)		+= chipreg.o
+obj-$(CONFIG_MTD_AMDSTD)	+= amd_flash.o 
+obj-$(CONFIG_MTD_CFI)		+= cfi_probe.o
+obj-$(CONFIG_MTD_CFI_UTIL)	+= cfi_util.o
+obj-$(CONFIG_MTD_CFI_STAA)	+= cfi_cmdset_0020.o
+obj-$(CONFIG_MTD_CFI_AMDSTD)	+= cfi_cmdset_0002.o
+obj-$(CONFIG_MTD_CFI_INTELEXT)	+= cfi_cmdset_0001.o
+obj-$(CONFIG_MTD_GEN_PROBE)	+= gen_probe.o
+obj-$(CONFIG_MTD_JEDEC)		+= jedec.o
+obj-$(CONFIG_MTD_JEDECPROBE)	+= jedec_probe.o
+obj-$(CONFIG_MTD_RAM)		+= map_ram.o
+obj-$(CONFIG_MTD_ROM)		+= map_rom.o
+obj-$(CONFIG_MTD_SHARP)		+= sharp.o
+obj-$(CONFIG_MTD_ABSENT)	+= map_absent.o
diff --git a/drivers/mtd/chips/amd_flash.c b/drivers/mtd/chips/amd_flash.c
new file mode 100644
index 000000000000..41e2e3e31603
--- /dev/null
+++ b/drivers/mtd/chips/amd_flash.c
@@ -0,0 +1,1415 @@
+/*
+ * MTD map driver for AMD compatible flash chips (non-CFI)
+ *
+ * Author: Jonas Holmberg <jonas.holmberg@axis.com>
+ *
+ * $Id: amd_flash.c,v 1.26 2004/11/20 12:49:04 dwmw2 Exp $
+ *
+ * Copyright (c) 2001 Axis Communications AB
+ *
+ * This file is under GPL.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+
+/* There's no limit. It exists only to avoid realloc. */
+#define MAX_AMD_CHIPS 8
+
+#define DEVICE_TYPE_X8	(8 / 8)
+#define DEVICE_TYPE_X16	(16 / 8)
+#define DEVICE_TYPE_X32	(32 / 8)
+
+/* Addresses */
+#define ADDR_MANUFACTURER		0x0000
+#define ADDR_DEVICE_ID			0x0001
+#define ADDR_SECTOR_LOCK		0x0002
+#define ADDR_HANDSHAKE			0x0003
+#define ADDR_UNLOCK_1			0x0555
+#define ADDR_UNLOCK_2			0x02AA
+
+/* Commands */
+#define CMD_UNLOCK_DATA_1		0x00AA
+#define CMD_UNLOCK_DATA_2		0x0055
+#define CMD_MANUFACTURER_UNLOCK_DATA	0x0090
+#define CMD_UNLOCK_BYPASS_MODE		0x0020
+#define CMD_PROGRAM_UNLOCK_DATA		0x00A0
+#define CMD_RESET_DATA			0x00F0
+#define CMD_SECTOR_ERASE_UNLOCK_DATA	0x0080
+#define CMD_SECTOR_ERASE_UNLOCK_DATA_2	0x0030
+
+#define CMD_UNLOCK_SECTOR		0x0060
+
+/* Manufacturers */
+#define MANUFACTURER_AMD	0x0001
+#define MANUFACTURER_ATMEL	0x001F
+#define MANUFACTURER_FUJITSU	0x0004
+#define MANUFACTURER_ST		0x0020
+#define MANUFACTURER_SST	0x00BF
+#define MANUFACTURER_TOSHIBA	0x0098
+
+/* AMD */
+#define AM29F800BB	0x2258
+#define AM29F800BT	0x22D6
+#define AM29LV800BB	0x225B
+#define AM29LV800BT	0x22DA
+#define AM29LV160DT	0x22C4
+#define AM29LV160DB	0x2249
+#define AM29BDS323D     0x22D1
+#define AM29BDS643D	0x227E
+
+/* Atmel */
+#define AT49xV16x	0x00C0
+#define AT49xV16xT	0x00C2
+
+/* Fujitsu */
+#define MBM29LV160TE	0x22C4
+#define MBM29LV160BE	0x2249
+#define MBM29LV800BB	0x225B
+
+/* ST - www.st.com */
+#define M29W800T	0x00D7
+#define M29W160DT	0x22C4
+#define M29W160DB	0x2249
+
+/* SST */
+#define SST39LF800	0x2781
+#define SST39LF160	0x2782
+
+/* Toshiba */
+#define TC58FVT160	0x00C2
+#define TC58FVB160	0x0043
+
+#define D6_MASK	0x40
+
+struct amd_flash_private {
+	int device_type;	
+	int interleave;	
+	int numchips;	
+	unsigned long chipshift;
+//	const char *im_name;
+	struct flchip chips[0];
+};
+
+struct amd_flash_info {
+	const __u16 mfr_id;
+	const __u16 dev_id;
+	const char *name;
+	const u_long size;
+	const int numeraseregions;
+	const struct mtd_erase_region_info regions[4];
+};
+
+
+
+static int amd_flash_read(struct mtd_info *, loff_t, size_t, size_t *,
+			  u_char *);
+static int amd_flash_write(struct mtd_info *, loff_t, size_t, size_t *,
+			   const u_char *);
+static int amd_flash_erase(struct mtd_info *, struct erase_info *);
+static void amd_flash_sync(struct mtd_info *);
+static int amd_flash_suspend(struct mtd_info *);
+static void amd_flash_resume(struct mtd_info *);
+static void amd_flash_destroy(struct mtd_info *);
+static struct mtd_info *amd_flash_probe(struct map_info *map);
+
+
+static struct mtd_chip_driver amd_flash_chipdrv = {
+	.probe = amd_flash_probe,
+	.destroy = amd_flash_destroy,
+	.name = "amd_flash",
+	.module = THIS_MODULE
+};
+
+
+
+static const char im_name[] = "amd_flash";
+
+
+
+static inline __u32 wide_read(struct map_info *map, __u32 addr)
+{
+	if (map->buswidth == 1) {
+		return map_read8(map, addr);
+	} else if (map->buswidth == 2) {
+		return map_read16(map, addr);
+	} else if (map->buswidth == 4) {
+		return map_read32(map, addr);
+        }
+
+	return 0;
+}
+
+static inline void wide_write(struct map_info *map, __u32 val, __u32 addr)
+{
+	if (map->buswidth == 1) {
+		map_write8(map, val, addr);
+	} else if (map->buswidth == 2) {
+		map_write16(map, val, addr);
+	} else if (map->buswidth == 4) {
+		map_write32(map, val, addr);
+	}
+}
+
+static inline __u32 make_cmd(struct map_info *map, __u32 cmd)
+{
+	const struct amd_flash_private *private = map->fldrv_priv;
+	if ((private->interleave == 2) &&
+	    (private->device_type == DEVICE_TYPE_X16)) {
+		cmd |= (cmd << 16);
+	}
+
+	return cmd;
+}
+
+static inline void send_unlock(struct map_info *map, unsigned long base)
+{
+	wide_write(map, (CMD_UNLOCK_DATA_1 << 16) | CMD_UNLOCK_DATA_1,
+		   base + (map->buswidth * ADDR_UNLOCK_1));
+	wide_write(map, (CMD_UNLOCK_DATA_2 << 16) | CMD_UNLOCK_DATA_2,
+		   base + (map->buswidth * ADDR_UNLOCK_2));
+}
+
+static inline void send_cmd(struct map_info *map, unsigned long base, __u32 cmd)
+{
+	send_unlock(map, base);
+	wide_write(map, make_cmd(map, cmd),
+		   base + (map->buswidth * ADDR_UNLOCK_1));
+}
+
+static inline void send_cmd_to_addr(struct map_info *map, unsigned long base,
+				    __u32 cmd, unsigned long addr)
+{
+	send_unlock(map, base);
+	wide_write(map, make_cmd(map, cmd), addr);
+}
+
+static inline int flash_is_busy(struct map_info *map, unsigned long addr,
+				int interleave)
+{
+
+	if ((interleave == 2) && (map->buswidth == 4)) {
+		__u32 read1, read2;
+
+		read1 = wide_read(map, addr);
+		read2 = wide_read(map, addr);
+
+		return (((read1 >> 16) & D6_MASK) !=
+			((read2 >> 16) & D6_MASK)) ||
+		       (((read1 & 0xffff) & D6_MASK) !=
+			((read2 & 0xffff) & D6_MASK));
+	}
+
+	return ((wide_read(map, addr) & D6_MASK) !=
+		(wide_read(map, addr) & D6_MASK));
+}
+
+static inline void unlock_sector(struct map_info *map, unsigned long sect_addr,
+				 int unlock)
+{
+	/* Sector lock address. A6 = 1 for unlock, A6 = 0 for lock */
+	int SLA = unlock ?
+		(sect_addr |  (0x40 * map->buswidth)) :
+		(sect_addr & ~(0x40 * map->buswidth)) ;
+
+	__u32 cmd = make_cmd(map, CMD_UNLOCK_SECTOR);
+
+	wide_write(map, make_cmd(map, CMD_RESET_DATA), 0);
+	wide_write(map, cmd, SLA); /* 1st cycle: write cmd to any address */
+	wide_write(map, cmd, SLA); /* 2nd cycle: write cmd to any address */
+	wide_write(map, cmd, SLA); /* 3rd cycle: write cmd to SLA */
+}
+
+static inline int is_sector_locked(struct map_info *map,
+				   unsigned long sect_addr)
+{
+	int status;
+
+	wide_write(map, CMD_RESET_DATA, 0);
+	send_cmd(map, sect_addr, CMD_MANUFACTURER_UNLOCK_DATA);
+
+	/* status is 0x0000 for unlocked and 0x0001 for locked */
+	status = wide_read(map, sect_addr + (map->buswidth * ADDR_SECTOR_LOCK));
+	wide_write(map, CMD_RESET_DATA, 0);
+	return status;
+}
+
+static int amd_flash_do_unlock(struct mtd_info *mtd, loff_t ofs, size_t len,
+			       int is_unlock)
+{
+	struct map_info *map;
+	struct mtd_erase_region_info *merip;
+	int eraseoffset, erasesize, eraseblocks;
+	int i;
+	int retval = 0;
+	int lock_status;
+      
+	map = mtd->priv;
+
+	/* Pass the whole chip through sector by sector and check for each
+	   sector if the sector and the given interval overlap */
+	for(i = 0; i < mtd->numeraseregions; i++) {
+		merip = &mtd->eraseregions[i];
+
+		eraseoffset = merip->offset;
+		erasesize = merip->erasesize;
+		eraseblocks = merip->numblocks;
+
+		if (ofs > eraseoffset + erasesize)
+			continue;
+
+		while (eraseblocks > 0) {
+			if (ofs < eraseoffset + erasesize && ofs + len > eraseoffset) {
+				unlock_sector(map, eraseoffset, is_unlock);
+
+				lock_status = is_sector_locked(map, eraseoffset);
+				
+				if (is_unlock && lock_status) {
+					printk("Cannot unlock sector at address %x length %xx\n",
+					       eraseoffset, merip->erasesize);
+					retval = -1;
+				} else if (!is_unlock && !lock_status) {
+					printk("Cannot lock sector at address %x length %x\n",
+					       eraseoffset, merip->erasesize);
+					retval = -1;
+				}
+			}
+			eraseoffset += erasesize;
+			eraseblocks --;
+		}
+	}
+	return retval;
+}
+
+static int amd_flash_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	return amd_flash_do_unlock(mtd, ofs, len, 1);
+}
+
+static int amd_flash_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	return amd_flash_do_unlock(mtd, ofs, len, 0);
+}
+
+
+/*
+ * Reads JEDEC manufacturer ID and device ID and returns the index of the first
+ * matching table entry (-1 if not found or alias for already found chip).
+ */ 
+static int probe_new_chip(struct mtd_info *mtd, __u32 base,
+			  struct flchip *chips,
+			  struct amd_flash_private *private,
+			  const struct amd_flash_info *table, int table_size)
+{
+	__u32 mfr_id;
+	__u32 dev_id;
+	struct map_info *map = mtd->priv;
+	struct amd_flash_private temp;
+	int i;
+
+	temp.device_type = DEVICE_TYPE_X16;	// Assume X16 (FIXME)
+	temp.interleave = 2;
+	map->fldrv_priv = &temp;
+
+	/* Enter autoselect mode. */
+	send_cmd(map, base, CMD_RESET_DATA);
+	send_cmd(map, base, CMD_MANUFACTURER_UNLOCK_DATA);
+
+	mfr_id = wide_read(map, base + (map->buswidth * ADDR_MANUFACTURER));
+	dev_id = wide_read(map, base + (map->buswidth * ADDR_DEVICE_ID));
+
+	if ((map->buswidth == 4) && ((mfr_id >> 16) == (mfr_id & 0xffff)) &&
+	    ((dev_id >> 16) == (dev_id & 0xffff))) {
+		mfr_id &= 0xffff;
+		dev_id &= 0xffff;
+	} else {
+		temp.interleave = 1;
+	}
+
+	for (i = 0; i < table_size; i++) {
+		if ((mfr_id == table[i].mfr_id) &&
+		    (dev_id == table[i].dev_id)) {
+			if (chips) {
+				int j;
+
+				/* Is this an alias for an already found chip?
+				 * In that case that chip should be in
+				 * autoselect mode now.
+				 */
+				for (j = 0; j < private->numchips; j++) {
+					__u32 mfr_id_other;
+					__u32 dev_id_other;
+
+					mfr_id_other =
+						wide_read(map, chips[j].start +
+							       (map->buswidth *
+								ADDR_MANUFACTURER
+							       ));
+					dev_id_other =
+						wide_read(map, chips[j].start +
+					    		       (map->buswidth *
+							        ADDR_DEVICE_ID));
+					if (temp.interleave == 2) {
+						mfr_id_other &= 0xffff;
+						dev_id_other &= 0xffff;
+					}
+					if ((mfr_id_other == mfr_id) &&
+					    (dev_id_other == dev_id)) {
+
+						/* Exit autoselect mode. */
+						send_cmd(map, base,
+							 CMD_RESET_DATA);
+
+						return -1;
+					}
+				}
+
+				if (private->numchips == MAX_AMD_CHIPS) {
+					printk(KERN_WARNING
+					       "%s: Too many flash chips "
+					       "detected. Increase "
+					       "MAX_AMD_CHIPS from %d.\n",
+					       map->name, MAX_AMD_CHIPS);
+
+					return -1;
+				}
+
+				chips[private->numchips].start = base;
+				chips[private->numchips].state = FL_READY;
+				chips[private->numchips].mutex =
+					&chips[private->numchips]._spinlock;
+				private->numchips++;
+			}
+
+			printk("%s: Found %d x %ldMiB %s at 0x%x\n", map->name,
+			       temp.interleave, (table[i].size)/(1024*1024),
+			       table[i].name, base);
+
+			mtd->size += table[i].size * temp.interleave;
+			mtd->numeraseregions += table[i].numeraseregions;
+
+			break;
+		}
+	}
+
+	/* Exit autoselect mode. */
+	send_cmd(map, base, CMD_RESET_DATA);
+
+	if (i == table_size) {
+		printk(KERN_DEBUG "%s: unknown flash device at 0x%x, "
+		       "mfr id 0x%x, dev id 0x%x\n", map->name,
+		       base, mfr_id, dev_id);
+		map->fldrv_priv = NULL;
+
+		return -1;
+	}
+
+	private->device_type = temp.device_type;
+	private->interleave = temp.interleave;
+
+	return i;
+}
+
+
+
+static struct mtd_info *amd_flash_probe(struct map_info *map)
+{
+	static const struct amd_flash_info table[] = {
+	{
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29LV160DT,
+		.name = "AMD AM29LV160DT",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 31 },
+			{ .offset = 0x1F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x1F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x1FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29LV160DB,
+		.name = "AMD AM29LV160DB",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x04000, .numblocks =  1 },
+			{ .offset = 0x004000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x008000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 31 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_TOSHIBA,
+		.dev_id = TC58FVT160,
+		.name = "Toshiba TC58FVT160",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 31 },
+			{ .offset = 0x1F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x1F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x1FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_FUJITSU,
+		.dev_id = MBM29LV160TE,
+		.name = "Fujitsu MBM29LV160TE",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 31 },
+			{ .offset = 0x1F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x1F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x1FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_TOSHIBA,
+		.dev_id = TC58FVB160,
+		.name = "Toshiba TC58FVB160",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x04000, .numblocks =  1 },
+			{ .offset = 0x004000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x008000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 31 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_FUJITSU,
+		.dev_id = MBM29LV160BE,
+		.name = "Fujitsu MBM29LV160BE",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x04000, .numblocks =  1 },
+			{ .offset = 0x004000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x008000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 31 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29LV800BB,
+		.name = "AMD AM29LV800BB",
+		.size = 0x00100000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x04000, .numblocks =  1 },
+			{ .offset = 0x004000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x008000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 15 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29F800BB,
+		.name = "AMD AM29F800BB",
+		.size = 0x00100000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x04000, .numblocks =  1 },
+			{ .offset = 0x004000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x008000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 15 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29LV800BT,
+		.name = "AMD AM29LV800BT",
+		.size = 0x00100000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 15 },
+			{ .offset = 0x0F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x0F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x0FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29F800BT,
+		.name = "AMD AM29F800BT",
+		.size = 0x00100000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 15 },
+			{ .offset = 0x0F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x0F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x0FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29LV800BB,
+		.name = "AMD AM29LV800BB",
+		.size = 0x00100000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 15 },
+			{ .offset = 0x0F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x0F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x0FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_FUJITSU,
+		.dev_id = MBM29LV800BB,
+		.name = "Fujitsu MBM29LV800BB",
+		.size = 0x00100000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x04000, .numblocks =  1 },
+			{ .offset = 0x004000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x008000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 15 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_ST,
+		.dev_id = M29W800T,
+		.name = "ST M29W800T",
+		.size = 0x00100000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 15 },
+			{ .offset = 0x0F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x0F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x0FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_ST,
+		.dev_id = M29W160DT,
+		.name = "ST M29W160DT",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 31 },
+			{ .offset = 0x1F0000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x1F8000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x1FC000, .erasesize = 0x04000, .numblocks =  1 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_ST,
+		.dev_id = M29W160DB,
+		.name = "ST M29W160DB",
+		.size = 0x00200000,
+		.numeraseregions = 4,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x04000, .numblocks =  1 },
+			{ .offset = 0x004000, .erasesize = 0x02000, .numblocks =  2 },
+			{ .offset = 0x008000, .erasesize = 0x08000, .numblocks =  1 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 31 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29BDS323D,
+		.name = "AMD AM29BDS323D",
+		.size = 0x00400000,
+		.numeraseregions = 3,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 48 },
+			{ .offset = 0x300000, .erasesize = 0x10000, .numblocks = 15 },
+			{ .offset = 0x3f0000, .erasesize = 0x02000, .numblocks =  8 },
+		}
+	}, {
+		.mfr_id = MANUFACTURER_AMD,
+		.dev_id = AM29BDS643D,
+		.name = "AMD AM29BDS643D",
+		.size = 0x00800000,
+		.numeraseregions = 3,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 96 },
+			{ .offset = 0x600000, .erasesize = 0x10000, .numblocks = 31 },
+			{ .offset = 0x7f0000, .erasesize = 0x02000, .numblocks =  8 },
+		}
+	}, {
+		.mfr_id = MANUFACTURER_ATMEL,
+		.dev_id = AT49xV16x,
+		.name = "Atmel AT49xV16x",
+		.size = 0x00200000,
+		.numeraseregions = 2,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x02000, .numblocks =  8 },
+			{ .offset = 0x010000, .erasesize = 0x10000, .numblocks = 31 }
+		}
+	}, {
+		.mfr_id = MANUFACTURER_ATMEL,
+		.dev_id = AT49xV16xT,
+		.name = "Atmel AT49xV16xT",
+		.size = 0x00200000,
+		.numeraseregions = 2,
+		.regions = {
+			{ .offset = 0x000000, .erasesize = 0x10000, .numblocks = 31 },
+			{ .offset = 0x1F0000, .erasesize = 0x02000, .numblocks =  8 }
+		}
+	} 
+	};
+
+	struct mtd_info *mtd;
+	struct flchip chips[MAX_AMD_CHIPS];
+	int table_pos[MAX_AMD_CHIPS];
+	struct amd_flash_private temp;
+	struct amd_flash_private *private;
+	u_long size;
+	unsigned long base;
+	int i;
+	int reg_idx;
+	int offset;
+
+	mtd = (struct mtd_info*)kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if (!mtd) {
+		printk(KERN_WARNING
+		       "%s: kmalloc failed for info structure\n", map->name);
+		return NULL;
+	}
+	memset(mtd, 0, sizeof(*mtd));
+	mtd->priv = map;
+
+	memset(&temp, 0, sizeof(temp));
+
+	printk("%s: Probing for AMD compatible flash...\n", map->name);
+
+	if ((table_pos[0] = probe_new_chip(mtd, 0, NULL, &temp, table,
+					   sizeof(table)/sizeof(table[0])))
+	    == -1) {
+		printk(KERN_WARNING
+		       "%s: Found no AMD compatible device at location zero\n",
+		       map->name);
+		kfree(mtd);
+
+		return NULL;
+	}
+
+	chips[0].start = 0;
+	chips[0].state = FL_READY;
+	chips[0].mutex = &chips[0]._spinlock;
+	temp.numchips = 1;
+	for (size = mtd->size; size > 1; size >>= 1) {
+		temp.chipshift++;
+	}
+	switch (temp.interleave) {
+		case 2:
+			temp.chipshift += 1;
+			break;
+		case 4:
+			temp.chipshift += 2;
+			break;
+	}
+
+	/* Find out if there are any more chips in the map. */
+	for (base = (1 << temp.chipshift);
+	     base < map->size;
+	     base += (1 << temp.chipshift)) {
+	     	int numchips = temp.numchips;
+		table_pos[numchips] = probe_new_chip(mtd, base, chips,
+			&temp, table, sizeof(table)/sizeof(table[0]));
+	}
+
+	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) *
+				    mtd->numeraseregions, GFP_KERNEL);
+	if (!mtd->eraseregions) { 
+		printk(KERN_WARNING "%s: Failed to allocate "
+		       "memory for MTD erase region info\n", map->name);
+		kfree(mtd);
+		map->fldrv_priv = NULL;
+		return NULL;
+	}
+
+	reg_idx = 0;
+	offset = 0;
+	for (i = 0; i < temp.numchips; i++) {
+		int dev_size;
+		int j;
+
+		dev_size = 0;
+		for (j = 0; j < table[table_pos[i]].numeraseregions; j++) {
+			mtd->eraseregions[reg_idx].offset = offset +
+				(table[table_pos[i]].regions[j].offset *
+				 temp.interleave);
+			mtd->eraseregions[reg_idx].erasesize =
+				table[table_pos[i]].regions[j].erasesize *
+				temp.interleave;
+			mtd->eraseregions[reg_idx].numblocks =
+				table[table_pos[i]].regions[j].numblocks;
+			if (mtd->erasesize <
+			    mtd->eraseregions[reg_idx].erasesize) {
+				mtd->erasesize =
+					mtd->eraseregions[reg_idx].erasesize;
+			}
+			dev_size += mtd->eraseregions[reg_idx].erasesize *
+				    mtd->eraseregions[reg_idx].numblocks;
+			reg_idx++;
+		}
+		offset += dev_size;
+	}
+	mtd->type = MTD_NORFLASH;
+	mtd->flags = MTD_CAP_NORFLASH;
+	mtd->name = map->name;
+	mtd->erase = amd_flash_erase;	
+	mtd->read = amd_flash_read;	
+	mtd->write = amd_flash_write;	
+	mtd->sync = amd_flash_sync;	
+	mtd->suspend = amd_flash_suspend;	
+	mtd->resume = amd_flash_resume;	
+	mtd->lock = amd_flash_lock;
+	mtd->unlock = amd_flash_unlock;
+
+	private = kmalloc(sizeof(*private) + (sizeof(struct flchip) *
+					      temp.numchips), GFP_KERNEL);
+	if (!private) {
+		printk(KERN_WARNING
+		       "%s: kmalloc failed for private structure\n", map->name);
+		kfree(mtd);
+		map->fldrv_priv = NULL;
+		return NULL;
+	}
+	memcpy(private, &temp, sizeof(temp));
+	memcpy(private->chips, chips,
+	       sizeof(struct flchip) * private->numchips);
+	for (i = 0; i < private->numchips; i++) {
+		init_waitqueue_head(&private->chips[i].wq);
+		spin_lock_init(&private->chips[i]._spinlock);
+	}
+
+	map->fldrv_priv = private;
+
+	map->fldrv = &amd_flash_chipdrv;
+
+	__module_get(THIS_MODULE);
+	return mtd;
+}
+
+
+
+static inline int read_one_chip(struct map_info *map, struct flchip *chip,
+			       loff_t adr, size_t len, u_char *buf)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	unsigned long timeo = jiffies + HZ;
+
+retry:
+	spin_lock_bh(chip->mutex);
+
+	if (chip->state != FL_READY){
+		printk(KERN_INFO "%s: waiting for chip to read, state = %d\n",
+		       map->name, chip->state);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+                
+		spin_unlock_bh(chip->mutex);
+
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+
+		if(signal_pending(current)) {
+			return -EINTR;
+		}
+
+		timeo = jiffies + HZ;
+
+		goto retry;
+	}	
+
+	adr += chip->start;
+
+	chip->state = FL_READY;
+
+	map_copy_from(map, buf, adr, len);
+
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+
+	return 0;
+}
+
+
+
+static int amd_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
+			  size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct amd_flash_private *private = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+	int ret = 0;
+
+	if ((from + len) > mtd->size) {
+		printk(KERN_WARNING "%s: read request past end of device "
+		       "(0x%lx)\n", map->name, (unsigned long)from + len);
+
+		return -EINVAL;
+	}
+
+	/* Offset within the first chip that the first read should start. */
+	chipnum = (from >> private->chipshift);
+	ofs = from - (chipnum <<  private->chipshift);
+
+	*retlen = 0;
+
+	while (len) {
+		unsigned long this_len;
+
+		if (chipnum >= private->numchips) {
+			break;
+		}
+
+		if ((len + ofs - 1) >> private->chipshift) {
+			this_len = (1 << private->chipshift) - ofs;
+		} else {
+			this_len = len;
+		}
+
+		ret = read_one_chip(map, &private->chips[chipnum], ofs,
+				    this_len, buf);
+		if (ret) {
+			break;
+		}
+
+		*retlen += this_len;
+		len -= this_len;
+		buf += this_len;
+
+		ofs = 0;
+		chipnum++;
+	}
+
+	return ret;
+}
+
+
+
+static int write_one_word(struct map_info *map, struct flchip *chip,
+			  unsigned long adr, __u32 datum)
+{
+	unsigned long timeo = jiffies + HZ;
+	struct amd_flash_private *private = map->fldrv_priv;
+	DECLARE_WAITQUEUE(wait, current);
+	int ret = 0;
+	int times_left;
+
+retry:
+	spin_lock_bh(chip->mutex);
+
+	if (chip->state != FL_READY){
+		printk("%s: waiting for chip to write, state = %d\n",
+		       map->name, chip->state);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+                
+		spin_unlock_bh(chip->mutex);
+
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		printk(KERN_INFO "%s: woke up to write\n", map->name);
+		if(signal_pending(current))
+			return -EINTR;
+
+		timeo = jiffies + HZ;
+
+		goto retry;
+	}	
+
+	chip->state = FL_WRITING;
+
+	adr += chip->start;
+	ENABLE_VPP(map);
+	send_cmd(map, chip->start, CMD_PROGRAM_UNLOCK_DATA);
+	wide_write(map, datum, adr);
+
+	times_left = 500000;
+	while (times_left-- && flash_is_busy(map, adr, private->interleave)) { 
+		if (need_resched()) {
+			spin_unlock_bh(chip->mutex);
+			schedule();
+			spin_lock_bh(chip->mutex);
+		}
+	}
+
+	if (!times_left) {
+		printk(KERN_WARNING "%s: write to 0x%lx timed out!\n",
+		       map->name, adr);
+		ret = -EIO;
+	} else {
+		__u32 verify;
+		if ((verify = wide_read(map, adr)) != datum) {
+			printk(KERN_WARNING "%s: write to 0x%lx failed. "
+			       "datum = %x, verify = %x\n",
+			       map->name, adr, datum, verify);
+			ret = -EIO;
+		}
+	}
+
+	DISABLE_VPP(map);
+	chip->state = FL_READY;
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+
+	return ret;
+}
+
+
+
+static int amd_flash_write(struct mtd_info *mtd, loff_t to , size_t len,
+			   size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct amd_flash_private *private = map->fldrv_priv;
+	int ret = 0;
+	int chipnum;
+	unsigned long ofs;
+	unsigned long chipstart;
+
+	*retlen = 0;
+	if (!len) {
+		return 0;
+	}
+
+	chipnum = to >> private->chipshift;
+	ofs = to  - (chipnum << private->chipshift);
+	chipstart = private->chips[chipnum].start;
+
+	/* If it's not bus-aligned, do the first byte write. */
+	if (ofs & (map->buswidth - 1)) {
+		unsigned long bus_ofs = ofs & ~(map->buswidth - 1);
+		int i = ofs - bus_ofs;
+		int n = 0;
+		u_char tmp_buf[4];
+		__u32 datum;
+
+		map_copy_from(map, tmp_buf,
+			       bus_ofs + private->chips[chipnum].start,
+			       map->buswidth);
+		while (len && i < map->buswidth)
+			tmp_buf[i++] = buf[n++], len--;
+
+		if (map->buswidth == 2) {
+			datum = *(__u16*)tmp_buf;
+		} else if (map->buswidth == 4) {
+			datum = *(__u32*)tmp_buf;
+		} else {
+			return -EINVAL;  /* should never happen, but be safe */
+		}
+
+		ret = write_one_word(map, &private->chips[chipnum], bus_ofs,
+				     datum);
+		if (ret) {
+			return ret;
+		}
+		
+		ofs += n;
+		buf += n;
+		(*retlen) += n;
+
+		if (ofs >> private->chipshift) {
+			chipnum++;
+			ofs = 0;
+			if (chipnum == private->numchips) {
+				return 0;
+			}
+		}
+	}
+	
+	/* We are now aligned, write as much as possible. */
+	while(len >= map->buswidth) {
+		__u32 datum;
+
+		if (map->buswidth == 1) {
+			datum = *(__u8*)buf;
+		} else if (map->buswidth == 2) {
+			datum = *(__u16*)buf;
+		} else if (map->buswidth == 4) {
+			datum = *(__u32*)buf;
+		} else {
+			return -EINVAL;
+		}
+
+		ret = write_one_word(map, &private->chips[chipnum], ofs, datum);
+
+		if (ret) {
+			return ret;
+		}
+
+		ofs += map->buswidth;
+		buf += map->buswidth;
+		(*retlen) += map->buswidth;
+		len -= map->buswidth;
+
+		if (ofs >> private->chipshift) {
+			chipnum++;
+			ofs = 0;
+			if (chipnum == private->numchips) {
+				return 0;
+			}
+			chipstart = private->chips[chipnum].start;
+		}
+	}
+
+	if (len & (map->buswidth - 1)) {
+		int i = 0, n = 0;
+		u_char tmp_buf[2];
+		__u32 datum;
+
+		map_copy_from(map, tmp_buf,
+			       ofs + private->chips[chipnum].start,
+			       map->buswidth);
+		while (len--) {
+			tmp_buf[i++] = buf[n++];
+		}
+
+		if (map->buswidth == 2) {
+			datum = *(__u16*)tmp_buf;
+		} else if (map->buswidth == 4) {
+			datum = *(__u32*)tmp_buf;
+		} else {
+			return -EINVAL;  /* should never happen, but be safe */
+		}
+
+		ret = write_one_word(map, &private->chips[chipnum], ofs, datum);
+
+		if (ret) {
+			return ret;
+		}
+		
+		(*retlen) += n;
+	}
+
+	return 0;
+}
+
+
+
+static inline int erase_one_block(struct map_info *map, struct flchip *chip,
+				  unsigned long adr, u_long size)
+{
+	unsigned long timeo = jiffies + HZ;
+	struct amd_flash_private *private = map->fldrv_priv;
+	DECLARE_WAITQUEUE(wait, current);
+
+retry:
+	spin_lock_bh(chip->mutex);
+
+	if (chip->state != FL_READY){
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+                
+		spin_unlock_bh(chip->mutex);
+
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+
+		if (signal_pending(current)) {
+			return -EINTR;
+		}
+
+		timeo = jiffies + HZ;
+
+		goto retry;
+	}	
+
+	chip->state = FL_ERASING;
+
+	adr += chip->start;
+	ENABLE_VPP(map);
+	send_cmd(map, chip->start, CMD_SECTOR_ERASE_UNLOCK_DATA);
+	send_cmd_to_addr(map, chip->start, CMD_SECTOR_ERASE_UNLOCK_DATA_2, adr);
+	
+	timeo = jiffies + (HZ * 20);
+
+	spin_unlock_bh(chip->mutex);
+	msleep(1000);
+	spin_lock_bh(chip->mutex);
+	
+	while (flash_is_busy(map, adr, private->interleave)) {
+
+		if (chip->state != FL_ERASING) {
+			/* Someone's suspended the erase. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_INFO "%s: erase suspended. Sleeping\n",
+			       map->name);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			
+			if (signal_pending(current)) {
+				return -EINTR;
+			}
+			
+			timeo = jiffies + (HZ*2); /* FIXME */
+			spin_lock_bh(chip->mutex);
+			continue;
+		}
+
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			chip->state = FL_READY;
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_WARNING "%s: waiting for erase to complete "
+			       "timed out.\n", map->name);
+			DISABLE_VPP(map);
+
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+
+		if (need_resched())
+			schedule();
+		else
+			udelay(1);
+		
+		spin_lock_bh(chip->mutex);
+	}
+
+	/* Verify every single word */
+	{
+		int address;
+		int error = 0;
+		__u8 verify;
+
+		for (address = adr; address < (adr + size); address++) {
+			if ((verify = map_read8(map, address)) != 0xFF) {
+				error = 1;
+				break;
+			}
+		}
+		if (error) {
+			chip->state = FL_READY;
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_WARNING
+			       "%s: verify error at 0x%x, size %ld.\n",
+			       map->name, address, size);
+			DISABLE_VPP(map);
+
+			return -EIO;
+		}
+	}
+	
+	DISABLE_VPP(map);
+	chip->state = FL_READY;
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+
+	return 0;
+}
+
+
+
+static int amd_flash_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct map_info *map = mtd->priv;
+	struct amd_flash_private *private = map->fldrv_priv;
+	unsigned long adr, len;
+	int chipnum;
+	int ret = 0;
+	int i;
+	int first;
+	struct mtd_erase_region_info *regions = mtd->eraseregions;
+
+	if (instr->addr > mtd->size) {
+		return -EINVAL;
+	}
+
+	if ((instr->len + instr->addr) > mtd->size) {
+		return -EINVAL;
+	}
+
+	/* Check that both start and end of the requested erase are
+	 * aligned with the erasesize at the appropriate addresses.
+	 */
+
+	i = 0;
+
+        /* Skip all erase regions which are ended before the start of
+           the requested erase. Actually, to save on the calculations,
+           we skip to the first erase region which starts after the
+           start of the requested erase, and then go back one.
+        */
+
+        while ((i < mtd->numeraseregions) &&
+	       (instr->addr >= regions[i].offset)) {
+               i++;
+	}
+        i--;
+
+	/* OK, now i is pointing at the erase region in which this
+	 * erase request starts. Check the start of the requested
+	 * erase range is aligned with the erase size which is in
+	 * effect here.
+	 */
+
+	if (instr->addr & (regions[i].erasesize-1)) {
+		return -EINVAL;
+	}
+
+	/* Remember the erase region we start on. */
+
+	first = i;
+
+	/* Next, check that the end of the requested erase is aligned
+	 * with the erase region at that address.
+	 */
+
+	while ((i < mtd->numeraseregions) && 
+	       ((instr->addr + instr->len) >= regions[i].offset)) {
+                i++;
+	}
+
+	/* As before, drop back one to point at the region in which
+	 * the address actually falls.
+	 */
+
+	i--;
+
+	if ((instr->addr + instr->len) & (regions[i].erasesize-1)) {
+                return -EINVAL;
+	}
+
+	chipnum = instr->addr >> private->chipshift;
+	adr = instr->addr - (chipnum << private->chipshift);
+	len = instr->len;
+
+	i = first;
+
+	while (len) {
+		ret = erase_one_block(map, &private->chips[chipnum], adr,
+				      regions[i].erasesize);
+
+		if (ret) {
+			return ret;
+		}
+
+		adr += regions[i].erasesize;
+		len -= regions[i].erasesize;
+
+		if ((adr % (1 << private->chipshift)) ==
+		    ((regions[i].offset + (regions[i].erasesize *
+		    			   regions[i].numblocks))
+		     % (1 << private->chipshift))) {
+			i++;
+		}
+
+		if (adr >> private->chipshift) {
+			adr = 0;
+			chipnum++;
+			if (chipnum >= private->numchips) {
+				break;
+			}
+		}
+	}
+		
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	
+	return 0;
+}
+
+
+
+static void amd_flash_sync(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct amd_flash_private *private = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	for (i = 0; !ret && (i < private->numchips); i++) {
+		chip = &private->chips[i];
+
+	retry:
+		spin_lock_bh(chip->mutex);
+
+		switch(chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			chip->oldstate = chip->state;
+			chip->state = FL_SYNCING;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		case FL_SYNCING:
+			spin_unlock_bh(chip->mutex);
+			break;
+
+		default:
+			/* Not an idle state */
+			add_wait_queue(&chip->wq, &wait);
+			
+			spin_unlock_bh(chip->mutex);
+
+			schedule();
+
+		        remove_wait_queue(&chip->wq, &wait);
+			
+			goto retry;
+		}
+	}
+
+	/* Unlock the chips again */
+	for (i--; i >= 0; i--) {
+		chip = &private->chips[i];
+
+		spin_lock_bh(chip->mutex);
+		
+		if (chip->state == FL_SYNCING) {
+			chip->state = chip->oldstate;
+			wake_up(&chip->wq);
+		}
+		spin_unlock_bh(chip->mutex);
+	}
+}
+
+
+
+static int amd_flash_suspend(struct mtd_info *mtd)
+{
+printk("amd_flash_suspend(): not implemented!\n");
+	return -EINVAL;
+}
+
+
+
+static void amd_flash_resume(struct mtd_info *mtd)
+{
+printk("amd_flash_resume(): not implemented!\n");
+}
+
+
+
+static void amd_flash_destroy(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct amd_flash_private *private = map->fldrv_priv;
+	kfree(private);
+}
+
+int __init amd_flash_init(void)
+{
+	register_mtd_chip_driver(&amd_flash_chipdrv);
+	return 0;
+}
+
+void __exit amd_flash_exit(void)
+{
+	unregister_mtd_chip_driver(&amd_flash_chipdrv);
+}
+
+module_init(amd_flash_init);
+module_exit(amd_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Holmberg <jonas.holmberg@axis.com>");
+MODULE_DESCRIPTION("Old MTD chip driver for AMD flash chips");
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
new file mode 100644
index 000000000000..c268bcd71720
--- /dev/null
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -0,0 +1,2160 @@
+/*
+ * Common Flash Interface support:
+ *   Intel Extended Vendor Command Set (ID 0x0001)
+ *
+ * (C) 2000 Red Hat. GPL'd
+ *
+ * $Id: cfi_cmdset_0001.c,v 1.164 2004/11/16 18:29:00 dwmw2 Exp $
+ *
+ * 
+ * 10/10/2000	Nicolas Pitre <nico@cam.org>
+ * 	- completely revamped method functions so they are aware and
+ * 	  independent of the flash geometry (buswidth, interleave, etc.)
+ * 	- scalability vs code size is completely set at compile-time
+ * 	  (see include/linux/mtd/cfi.h for selection)
+ *	- optimized write buffer method
+ * 02/05/2002	Christopher Hoover <ch@hpl.hp.com>/<ch@murgatroid.com>
+ *	- reworked lock/unlock/erase support for var size flash
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/xip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/mtd/cfi.h>
+
+/* #define CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE */
+/* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
+
+// debugging, turns off buffer write mode if set to 1
+#define FORCE_WORD_WRITE 0
+
+#define MANUFACTURER_INTEL	0x0089
+#define I82802AB	0x00ad
+#define I82802AC	0x00ac
+#define MANUFACTURER_ST         0x0020
+#define M50LPW080       0x002F
+
+static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+//static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+//static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int cfi_intelext_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *);
+static void cfi_intelext_sync (struct mtd_info *);
+static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len);
+static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
+static int cfi_intelext_suspend (struct mtd_info *);
+static void cfi_intelext_resume (struct mtd_info *);
+
+static void cfi_intelext_destroy(struct mtd_info *);
+
+struct mtd_info *cfi_cmdset_0001(struct map_info *, int);
+
+static struct mtd_info *cfi_intelext_setup (struct mtd_info *);
+static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private **);
+
+static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len,
+		     size_t *retlen, u_char **mtdbuf);
+static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from,
+			size_t len);
+
+static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
+static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr);
+#include "fwh_lock.h"
+
+
+
+/*
+ *  *********** SETUP AND PROBE BITS  ***********
+ */
+
+static struct mtd_chip_driver cfi_intelext_chipdrv = {
+	.probe		= NULL, /* Not usable directly */
+	.destroy	= cfi_intelext_destroy,
+	.name		= "cfi_cmdset_0001",
+	.module		= THIS_MODULE
+};
+
+/* #define DEBUG_LOCK_BITS */
+/* #define DEBUG_CFI_FEATURES */
+
+#ifdef DEBUG_CFI_FEATURES
+static void cfi_tell_features(struct cfi_pri_intelext *extp)
+{
+	int i;
+	printk("  Feature/Command Support:      %4.4X\n", extp->FeatureSupport);
+	printk("     - Chip Erase:              %s\n", extp->FeatureSupport&1?"supported":"unsupported");
+	printk("     - Suspend Erase:           %s\n", extp->FeatureSupport&2?"supported":"unsupported");
+	printk("     - Suspend Program:         %s\n", extp->FeatureSupport&4?"supported":"unsupported");
+	printk("     - Legacy Lock/Unlock:      %s\n", extp->FeatureSupport&8?"supported":"unsupported");
+	printk("     - Queued Erase:            %s\n", extp->FeatureSupport&16?"supported":"unsupported");
+	printk("     - Instant block lock:      %s\n", extp->FeatureSupport&32?"supported":"unsupported");
+	printk("     - Protection Bits:         %s\n", extp->FeatureSupport&64?"supported":"unsupported");
+	printk("     - Page-mode read:          %s\n", extp->FeatureSupport&128?"supported":"unsupported");
+	printk("     - Synchronous read:        %s\n", extp->FeatureSupport&256?"supported":"unsupported");
+	printk("     - Simultaneous operations: %s\n", extp->FeatureSupport&512?"supported":"unsupported");
+	for (i=10; i<32; i++) {
+		if (extp->FeatureSupport & (1<<i)) 
+			printk("     - Unknown Bit %X:      supported\n", i);
+	}
+	
+	printk("  Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport);
+	printk("     - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported");
+	for (i=1; i<8; i++) {
+		if (extp->SuspendCmdSupport & (1<<i))
+			printk("     - Unknown Bit %X:               supported\n", i);
+	}
+	
+	printk("  Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask);
+	printk("     - Lock Bit Active:      %s\n", extp->BlkStatusRegMask&1?"yes":"no");
+	printk("     - Valid Bit Active:     %s\n", extp->BlkStatusRegMask&2?"yes":"no");
+	for (i=2; i<16; i++) {
+		if (extp->BlkStatusRegMask & (1<<i))
+			printk("     - Unknown Bit %X Active: yes\n",i);
+	}
+	
+	printk("  Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n", 
+	       extp->VccOptimal >> 4, extp->VccOptimal & 0xf);
+	if (extp->VppOptimal)
+		printk("  Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", 
+		       extp->VppOptimal >> 4, extp->VppOptimal & 0xf);
+}
+#endif
+
+#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+/* Some Intel Strata Flash prior to FPO revision C has bugs in this area */ 
+static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+
+	printk(KERN_WARNING "cfi_cmdset_0001: Suspend "
+	                    "erase on write disabled.\n");
+	extp->SuspendCmdSupport &= ~1;
+}
+#endif
+
+#ifdef CMDSET0001_DISABLE_WRITE_SUSPEND
+static void fixup_no_write_suspend(struct mtd_info *mtd, void* param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
+
+	if (cfip && (cfip->FeatureSupport&4)) {
+		cfip->FeatureSupport &= ~4;
+		printk(KERN_WARNING "cfi_cmdset_0001: write suspend disabled\n");
+	}
+}
+#endif
+
+static void fixup_st_m28w320ct(struct mtd_info *mtd, void* param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	
+	cfi->cfiq->BufWriteTimeoutTyp = 0;	/* Not supported */
+	cfi->cfiq->BufWriteTimeoutMax = 0;	/* Not supported */
+}
+
+static void fixup_st_m28w320cb(struct mtd_info *mtd, void* param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	
+	/* Note this is done after the region info is endian swapped */
+	cfi->cfiq->EraseRegionInfo[1] =
+		(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
+};
+
+static void fixup_use_point(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	if (!mtd->point && map_is_linear(map)) {
+		mtd->point   = cfi_intelext_point;
+		mtd->unpoint = cfi_intelext_unpoint;
+	}
+}
+
+static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	if (cfi->cfiq->BufWriteTimeoutTyp) {
+		printk(KERN_INFO "Using buffer write method\n" );
+		mtd->write = cfi_intelext_write_buffers;
+	}
+}
+
+static struct cfi_fixup cfi_fixup_table[] = {
+#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL }, 
+#endif
+#ifdef CMDSET0001_DISABLE_WRITE_SUSPEND
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_no_write_suspend, NULL },
+#endif
+#if !FORCE_WORD_WRITE
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL },
+#endif
+	{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL },
+	{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL },
+	{ 0, 0, NULL, NULL }
+};
+
+static struct cfi_fixup jedec_fixup_table[] = {
+	{ MANUFACTURER_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
+	{ 0, 0, NULL, NULL }
+};
+static struct cfi_fixup fixup_table[] = {
+	/* The CFI vendor ids and the JEDEC vendor IDs appear
+	 * to be common.  It is like the devices id's are as
+	 * well.  This table is to pick all cases where
+	 * we know that is the case.
+	 */
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_point, NULL },
+	{ 0, 0, NULL, NULL }
+};
+
+static inline struct cfi_pri_intelext *
+read_pri_intelext(struct map_info *map, __u16 adr)
+{
+	struct cfi_pri_intelext *extp;
+	unsigned int extp_size = sizeof(*extp);
+
+ again:
+	extp = (struct cfi_pri_intelext *)cfi_read_pri(map, adr, extp_size, "Intel/Sharp");
+	if (!extp)
+		return NULL;
+
+	/* Do some byteswapping if necessary */
+	extp->FeatureSupport = le32_to_cpu(extp->FeatureSupport);
+	extp->BlkStatusRegMask = le16_to_cpu(extp->BlkStatusRegMask);
+	extp->ProtRegAddr = le16_to_cpu(extp->ProtRegAddr);
+
+	if (extp->MajorVersion == '1' && extp->MinorVersion == '3') {
+		unsigned int extra_size = 0;
+		int nb_parts, i;
+
+		/* Protection Register info */
+		extra_size += (extp->NumProtectionFields - 1) * (4 + 6);
+
+		/* Burst Read info */
+		extra_size += 6;
+
+		/* Number of hardware-partitions */
+		extra_size += 1;
+		if (extp_size < sizeof(*extp) + extra_size)
+			goto need_more;
+		nb_parts = extp->extra[extra_size - 1];
+
+		for (i = 0; i < nb_parts; i++) {
+			struct cfi_intelext_regioninfo *rinfo;
+			rinfo = (struct cfi_intelext_regioninfo *)&extp->extra[extra_size];
+			extra_size += sizeof(*rinfo);
+			if (extp_size < sizeof(*extp) + extra_size)
+				goto need_more;
+			rinfo->NumIdentPartitions=le16_to_cpu(rinfo->NumIdentPartitions);
+			extra_size += (rinfo->NumBlockTypes - 1)
+				      * sizeof(struct cfi_intelext_blockinfo);
+		}
+
+		if (extp_size < sizeof(*extp) + extra_size) {
+			need_more:
+			extp_size = sizeof(*extp) + extra_size;
+			kfree(extp);
+			if (extp_size > 4096) {
+				printk(KERN_ERR
+					"%s: cfi_pri_intelext is too fat\n",
+					__FUNCTION__);
+				return NULL;
+			}
+			goto again;
+		}
+	}
+		
+	return extp;
+}
+
+/* This routine is made available to other mtd code via
+ * inter_module_register.  It must only be accessed through
+ * inter_module_get which will bump the use count of this module.  The
+ * addresses passed back in cfi are valid as long as the use count of
+ * this module is non-zero, i.e. between inter_module_get and
+ * inter_module_put.  Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
+ */
+struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct mtd_info *mtd;
+	int i;
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if (!mtd) {
+		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+		return NULL;
+	}
+	memset(mtd, 0, sizeof(*mtd));
+	mtd->priv = map;
+	mtd->type = MTD_NORFLASH;
+
+	/* Fill in the default mtd operations */
+	mtd->erase   = cfi_intelext_erase_varsize;
+	mtd->read    = cfi_intelext_read;
+	mtd->write   = cfi_intelext_write_words;
+	mtd->sync    = cfi_intelext_sync;
+	mtd->lock    = cfi_intelext_lock;
+	mtd->unlock  = cfi_intelext_unlock;
+	mtd->suspend = cfi_intelext_suspend;
+	mtd->resume  = cfi_intelext_resume;
+	mtd->flags   = MTD_CAP_NORFLASH;
+	mtd->name    = map->name;
+	
+	if (cfi->cfi_mode == CFI_MODE_CFI) {
+		/* 
+		 * It's a real CFI chip, not one for which the probe
+		 * routine faked a CFI structure. So we read the feature
+		 * table from it.
+		 */
+		__u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR;
+		struct cfi_pri_intelext *extp;
+
+		extp = read_pri_intelext(map, adr);
+		if (!extp) {
+			kfree(mtd);
+			return NULL;
+		}
+
+		/* Install our own private info structure */
+		cfi->cmdset_priv = extp;	
+
+		cfi_fixup(mtd, cfi_fixup_table);
+
+#ifdef DEBUG_CFI_FEATURES
+		/* Tell the user about it in lots of lovely detail */
+		cfi_tell_features(extp);
+#endif	
+
+		if(extp->SuspendCmdSupport & 1) {
+			printk(KERN_NOTICE "cfi_cmdset_0001: Erase suspend on write enabled\n");
+		}
+	}
+	else if (cfi->cfi_mode == CFI_MODE_JEDEC) {
+		/* Apply jedec specific fixups */
+		cfi_fixup(mtd, jedec_fixup_table);
+	}
+	/* Apply generic fixups */
+	cfi_fixup(mtd, fixup_table);
+
+	for (i=0; i< cfi->numchips; i++) {
+		cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
+		cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
+		cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
+		cfi->chips[i].ref_point_counter = 0;
+	}		
+
+	map->fldrv = &cfi_intelext_chipdrv;
+	
+	return cfi_intelext_setup(mtd);
+}
+
+static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long offset = 0;
+	int i,j;
+	unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave;
+
+	//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
+
+	mtd->size = devsize * cfi->numchips;
+
+	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
+	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) 
+			* mtd->numeraseregions, GFP_KERNEL);
+	if (!mtd->eraseregions) { 
+		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
+		goto setup_err;
+	}
+	
+	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
+		unsigned long ernum, ersize;
+		ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave;
+		ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1;
+
+		if (mtd->erasesize < ersize) {
+			mtd->erasesize = ersize;
+		}
+		for (j=0; j<cfi->numchips; j++) {
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum;
+		}
+		offset += (ersize * ernum);
+	}
+
+	if (offset != devsize) {
+		/* Argh */
+		printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
+		goto setup_err;
+	}
+
+	for (i=0; i<mtd->numeraseregions;i++){
+		printk(KERN_DEBUG "%d: offset=0x%x,size=0x%x,blocks=%d\n",
+		       i,mtd->eraseregions[i].offset,
+		       mtd->eraseregions[i].erasesize,
+		       mtd->eraseregions[i].numblocks);
+	}
+
+#if 0
+	mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg;
+	mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg;
+#endif
+
+	/* This function has the potential to distort the reality
+	   a bit and therefore should be called last. */
+	if (cfi_intelext_partition_fixup(mtd, &cfi) != 0)
+		goto setup_err;
+
+	__module_get(THIS_MODULE);
+	return mtd;
+
+ setup_err:
+	if(mtd) {
+		if(mtd->eraseregions)
+			kfree(mtd->eraseregions);
+		kfree(mtd);
+	}
+	kfree(cfi->cmdset_priv);
+	return NULL;
+}
+
+static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
+					struct cfi_private **pcfi)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = *pcfi;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+	/*
+	 * Probing of multi-partition flash ships.
+	 *
+	 * To support multiple partitions when available, we simply arrange
+	 * for each of them to have their own flchip structure even if they
+	 * are on the same physical chip.  This means completely recreating
+	 * a new cfi_private structure right here which is a blatent code
+	 * layering violation, but this is still the least intrusive
+	 * arrangement at this point. This can be rearranged in the future
+	 * if someone feels motivated enough.  --nico
+	 */
+	if (extp && extp->MajorVersion == '1' && extp->MinorVersion == '3'
+	    && extp->FeatureSupport & (1 << 9)) {
+		struct cfi_private *newcfi;
+		struct flchip *chip;
+		struct flchip_shared *shared;
+		int offs, numregions, numparts, partshift, numvirtchips, i, j;
+
+		/* Protection Register info */
+		offs = (extp->NumProtectionFields - 1) * (4 + 6);
+
+		/* Burst Read info */
+		offs += 6;
+
+		/* Number of partition regions */
+		numregions = extp->extra[offs];
+		offs += 1;
+
+		/* Number of hardware partitions */
+		numparts = 0;
+		for (i = 0; i < numregions; i++) {
+			struct cfi_intelext_regioninfo *rinfo;
+			rinfo = (struct cfi_intelext_regioninfo *)&extp->extra[offs];
+			numparts += rinfo->NumIdentPartitions;
+			offs += sizeof(*rinfo)
+				+ (rinfo->NumBlockTypes - 1) *
+				  sizeof(struct cfi_intelext_blockinfo);
+		}
+
+		/*
+		 * All functions below currently rely on all chips having
+		 * the same geometry so we'll just assume that all hardware
+		 * partitions are of the same size too.
+		 */
+		partshift = cfi->chipshift - __ffs(numparts);
+
+		if ((1 << partshift) < mtd->erasesize) {
+			printk( KERN_ERR
+				"%s: bad number of hw partitions (%d)\n",
+				__FUNCTION__, numparts);
+			return -EINVAL;
+		}
+
+		numvirtchips = cfi->numchips * numparts;
+		newcfi = kmalloc(sizeof(struct cfi_private) + numvirtchips * sizeof(struct flchip), GFP_KERNEL);
+		if (!newcfi)
+			return -ENOMEM;
+		shared = kmalloc(sizeof(struct flchip_shared) * cfi->numchips, GFP_KERNEL);
+		if (!shared) {
+			kfree(newcfi);
+			return -ENOMEM;
+		}
+		memcpy(newcfi, cfi, sizeof(struct cfi_private));
+		newcfi->numchips = numvirtchips;
+		newcfi->chipshift = partshift;
+
+		chip = &newcfi->chips[0];
+		for (i = 0; i < cfi->numchips; i++) {
+			shared[i].writing = shared[i].erasing = NULL;
+			spin_lock_init(&shared[i].lock);
+			for (j = 0; j < numparts; j++) {
+				*chip = cfi->chips[i];
+				chip->start += j << partshift;
+				chip->priv = &shared[i];
+				/* those should be reset too since
+				   they create memory references. */
+				init_waitqueue_head(&chip->wq);
+				spin_lock_init(&chip->_spinlock);
+				chip->mutex = &chip->_spinlock;
+				chip++;
+			}
+		}
+
+		printk(KERN_DEBUG "%s: %d set(s) of %d interleaved chips "
+				  "--> %d partitions of %d KiB\n",
+				  map->name, cfi->numchips, cfi->interleave,
+				  newcfi->numchips, 1<<(newcfi->chipshift-10));
+
+		map->fldrv_priv = newcfi;
+		*pcfi = newcfi;
+		kfree(cfi);
+	}
+
+	return 0;
+}
+
+/*
+ *  *********** CHIP ACCESS FUNCTIONS ***********
+ */
+
+static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK = CMD(0x80), status_PWS = CMD(0x01);
+	unsigned long timeo;
+	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
+
+ resettime:
+	timeo = jiffies + HZ;
+ retry:
+	if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING)) {
+		/*
+		 * OK. We have possibility for contension on the write/erase
+		 * operations which are global to the real chip and not per
+		 * partition.  So let's fight it over in the partition which
+		 * currently has authority on the operation.
+		 *
+		 * The rules are as follows:
+		 *
+		 * - any write operation must own shared->writing.
+		 *
+		 * - any erase operation must own _both_ shared->writing and
+		 *   shared->erasing.
+		 *
+		 * - contension arbitration is handled in the owner's context.
+		 *
+		 * The 'shared' struct can be read when its lock is taken.
+		 * However any writes to it can only be made when the current
+		 * owner's lock is also held.
+		 */
+		struct flchip_shared *shared = chip->priv;
+		struct flchip *contender;
+		spin_lock(&shared->lock);
+		contender = shared->writing;
+		if (contender && contender != chip) {
+			/*
+			 * The engine to perform desired operation on this
+			 * partition is already in use by someone else.
+			 * Let's fight over it in the context of the chip
+			 * currently using it.  If it is possible to suspend,
+			 * that other partition will do just that, otherwise
+			 * it'll happily send us to sleep.  In any case, when
+			 * get_chip returns success we're clear to go ahead.
+			 */
+			int ret = spin_trylock(contender->mutex);
+			spin_unlock(&shared->lock);
+			if (!ret)
+				goto retry;
+			spin_unlock(chip->mutex);
+			ret = get_chip(map, contender, contender->start, mode);
+			spin_lock(chip->mutex);
+			if (ret) {
+				spin_unlock(contender->mutex);
+				return ret;
+			}
+			timeo = jiffies + HZ;
+			spin_lock(&shared->lock);
+		}
+
+		/* We now own it */
+		shared->writing = chip;
+		if (mode == FL_ERASING)
+			shared->erasing = chip;
+		if (contender && contender != chip)
+			spin_unlock(contender->mutex);
+		spin_unlock(&shared->lock);
+	}
+
+	switch (chip->state) {
+
+	case FL_STATUS:
+		for (;;) {
+			status = map_read(map, adr);
+			if (map_word_andequal(map, status, status_OK, status_OK))
+				break;
+
+			/* At this point we're fine with write operations
+			   in other partitions as they don't conflict. */
+			if (chip->priv && map_word_andequal(map, status, status_PWS, status_PWS))
+				break;
+
+			if (time_after(jiffies, timeo)) {
+				printk(KERN_ERR "Waiting for chip to be ready timed out. Status %lx\n", 
+				       status.x[0]);
+				return -EIO;
+			}
+			spin_unlock(chip->mutex);
+			cfi_udelay(1);
+			spin_lock(chip->mutex);
+			/* Someone else might have been playing with it. */
+			goto retry;
+		}
+				
+	case FL_READY:
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+		return 0;
+
+	case FL_ERASING:
+		if (!cfip ||
+		    !(cfip->FeatureSupport & 2) ||
+		    !(mode == FL_READY || mode == FL_POINT ||
+		     (mode == FL_WRITING && (cfip->SuspendCmdSupport & 1))))
+			goto sleep;
+
+
+		/* Erase suspend */
+		map_write(map, CMD(0xB0), adr);
+
+		/* If the flash has finished erasing, then 'erase suspend'
+		 * appears to make some (28F320) flash devices switch to
+		 * 'read' mode.  Make sure that we switch to 'read status'
+		 * mode so we get the right data. --rmk
+		 */
+		map_write(map, CMD(0x70), adr);
+		chip->oldstate = FL_ERASING;
+		chip->state = FL_ERASE_SUSPENDING;
+		chip->erase_suspended = 1;
+		for (;;) {
+			status = map_read(map, adr);
+			if (map_word_andequal(map, status, status_OK, status_OK))
+			        break;
+
+			if (time_after(jiffies, timeo)) {
+				/* Urgh. Resume and pretend we weren't here.  */
+				map_write(map, CMD(0xd0), adr);
+				/* Make sure we're in 'read status' mode if it had finished */
+				map_write(map, CMD(0x70), adr);
+				chip->state = FL_ERASING;
+				chip->oldstate = FL_READY;
+				printk(KERN_ERR "Chip not ready after erase "
+				       "suspended: status = 0x%lx\n", status.x[0]);
+				return -EIO;
+			}
+
+			spin_unlock(chip->mutex);
+			cfi_udelay(1);
+			spin_lock(chip->mutex);
+			/* Nobody will touch it while it's in state FL_ERASE_SUSPENDING.
+			   So we can just loop here. */
+		}
+		chip->state = FL_STATUS;
+		return 0;
+
+	case FL_XIP_WHILE_ERASING:
+		if (mode != FL_READY && mode != FL_POINT &&
+		    (mode != FL_WRITING || !cfip || !(cfip->SuspendCmdSupport&1)))
+			goto sleep;
+		chip->oldstate = chip->state;
+		chip->state = FL_READY;
+		return 0;
+
+	case FL_POINT:
+		/* Only if there's no operation suspended... */
+		if (mode == FL_READY && chip->oldstate == FL_READY)
+			return 0;
+
+	default:
+	sleep:
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		spin_lock(chip->mutex);
+		goto resettime;
+	}
+}
+
+static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	if (chip->priv) {
+		struct flchip_shared *shared = chip->priv;
+		spin_lock(&shared->lock);
+		if (shared->writing == chip && chip->oldstate == FL_READY) {
+			/* We own the ability to write, but we're done */
+			shared->writing = shared->erasing;
+			if (shared->writing && shared->writing != chip) {
+				/* give back ownership to who we loaned it from */
+				struct flchip *loaner = shared->writing;
+				spin_lock(loaner->mutex);
+				spin_unlock(&shared->lock);
+				spin_unlock(chip->mutex);
+				put_chip(map, loaner, loaner->start);
+				spin_lock(chip->mutex);
+				spin_unlock(loaner->mutex);
+				wake_up(&chip->wq);
+				return;
+			}
+			shared->erasing = NULL;
+			shared->writing = NULL;
+		} else if (shared->erasing == chip && shared->writing != chip) {
+			/*
+			 * We own the ability to erase without the ability
+			 * to write, which means the erase was suspended
+			 * and some other partition is currently writing.
+			 * Don't let the switch below mess things up since
+			 * we don't have ownership to resume anything.
+			 */
+			spin_unlock(&shared->lock);
+			wake_up(&chip->wq);
+			return;
+		}
+		spin_unlock(&shared->lock);
+	}
+
+	switch(chip->oldstate) {
+	case FL_ERASING:
+		chip->state = chip->oldstate;
+		/* What if one interleaved chip has finished and the 
+		   other hasn't? The old code would leave the finished
+		   one in READY mode. That's bad, and caused -EROFS 
+		   errors to be returned from do_erase_oneblock because
+		   that's the only bit it checked for at the time.
+		   As the state machine appears to explicitly allow 
+		   sending the 0x70 (Read Status) command to an erasing
+		   chip and expecting it to be ignored, that's what we 
+		   do. */
+		map_write(map, CMD(0xd0), adr);
+		map_write(map, CMD(0x70), adr);
+		chip->oldstate = FL_READY;
+		chip->state = FL_ERASING;
+		break;
+
+	case FL_XIP_WHILE_ERASING:
+		chip->state = chip->oldstate;
+		chip->oldstate = FL_READY;
+		break;
+
+	case FL_READY:
+	case FL_STATUS:
+	case FL_JEDEC_QUERY:
+		/* We should really make set_vpp() count, rather than doing this */
+		DISABLE_VPP(map);
+		break;
+	default:
+		printk(KERN_ERR "put_chip() called with oldstate %d!!\n", chip->oldstate);
+	}
+	wake_up(&chip->wq);
+}
+
+#ifdef CONFIG_MTD_XIP
+
+/*
+ * No interrupt what so ever can be serviced while the flash isn't in array
+ * mode.  This is ensured by the xip_disable() and xip_enable() functions
+ * enclosing any code path where the flash is known not to be in array mode.
+ * And within a XIP disabled code path, only functions marked with __xipram
+ * may be called and nothing else (it's a good thing to inspect generated
+ * assembly to make sure inline functions were actually inlined and that gcc
+ * didn't emit calls to its own support functions). Also configuring MTD CFI
+ * support to a single buswidth and a single interleave is also recommended.
+ * Note that not only IRQs are disabled but the preemption count is also
+ * increased to prevent other locking primitives (namely spin_unlock) from
+ * decrementing the preempt count to zero and scheduling the CPU away while
+ * not in array mode.
+ */
+
+static void xip_disable(struct map_info *map, struct flchip *chip,
+			unsigned long adr)
+{
+	/* TODO: chips with no XIP use should ignore and return */
+	(void) map_read(map, adr); /* ensure mmu mapping is up to date */
+	preempt_disable();
+	local_irq_disable();
+}
+
+static void __xipram xip_enable(struct map_info *map, struct flchip *chip,
+				unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	if (chip->state != FL_POINT && chip->state != FL_READY) {
+		map_write(map, CMD(0xff), adr);
+		chip->state = FL_READY;
+	}
+	(void) map_read(map, adr);
+	asm volatile (".rep 8; nop; .endr"); /* fill instruction prefetch */
+	local_irq_enable();
+	preempt_enable();
+}
+
+/*
+ * When a delay is required for the flash operation to complete, the
+ * xip_udelay() function is polling for both the given timeout and pending
+ * (but still masked) hardware interrupts.  Whenever there is an interrupt
+ * pending then the flash erase or write operation is suspended, array mode
+ * restored and interrupts unmasked.  Task scheduling might also happen at that
+ * point.  The CPU eventually returns from the interrupt or the call to
+ * schedule() and the suspended flash operation is resumed for the remaining
+ * of the delay period.
+ *
+ * Warning: this function _will_ fool interrupt latency tracing tools.
+ */
+
+static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
+				unsigned long adr, int usec)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
+	map_word status, OK = CMD(0x80);
+	unsigned long suspended, start = xip_currtime();
+	flstate_t oldstate, newstate;
+
+	do {
+		cpu_relax();
+		if (xip_irqpending() && cfip &&
+		    ((chip->state == FL_ERASING && (cfip->FeatureSupport&2)) ||
+		     (chip->state == FL_WRITING && (cfip->FeatureSupport&4))) &&
+		    (cfi_interleave_is_1(cfi) || chip->oldstate == FL_READY)) {
+			/*
+			 * Let's suspend the erase or write operation when
+			 * supported.  Note that we currently don't try to
+			 * suspend interleaved chips if there is already
+			 * another operation suspended (imagine what happens
+			 * when one chip was already done with the current
+			 * operation while another chip suspended it, then
+			 * we resume the whole thing at once).  Yes, it
+			 * can happen!
+			 */
+			map_write(map, CMD(0xb0), adr);
+			map_write(map, CMD(0x70), adr);
+			usec -= xip_elapsed_since(start);
+			suspended = xip_currtime();
+			do {
+				if (xip_elapsed_since(suspended) > 100000) {
+					/*
+					 * The chip doesn't want to suspend
+					 * after waiting for 100 msecs.
+					 * This is a critical error but there
+					 * is not much we can do here.
+					 */
+					return;
+				}
+				status = map_read(map, adr);
+			} while (!map_word_andequal(map, status, OK, OK));
+
+			/* Suspend succeeded */
+			oldstate = chip->state;
+			if (oldstate == FL_ERASING) {
+				if (!map_word_bitsset(map, status, CMD(0x40)))
+					break;
+				newstate = FL_XIP_WHILE_ERASING;
+				chip->erase_suspended = 1;
+			} else {
+				if (!map_word_bitsset(map, status, CMD(0x04)))
+					break;
+				newstate = FL_XIP_WHILE_WRITING;
+				chip->write_suspended = 1;
+			}
+			chip->state = newstate;
+			map_write(map, CMD(0xff), adr);
+			(void) map_read(map, adr);
+			asm volatile (".rep 8; nop; .endr");
+			local_irq_enable();
+			preempt_enable();
+			asm volatile (".rep 8; nop; .endr");
+			cond_resched();
+
+			/*
+			 * We're back.  However someone else might have
+			 * decided to go write to the chip if we are in
+			 * a suspended erase state.  If so let's wait
+			 * until it's done.
+			 */
+			preempt_disable();
+			while (chip->state != newstate) {
+				DECLARE_WAITQUEUE(wait, current);
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				add_wait_queue(&chip->wq, &wait);
+				preempt_enable();
+				schedule();
+				remove_wait_queue(&chip->wq, &wait);
+				preempt_disable();
+			}
+			/* Disallow XIP again */
+			local_irq_disable();
+
+			/* Resume the write or erase operation */
+			map_write(map, CMD(0xd0), adr);
+			map_write(map, CMD(0x70), adr);
+			chip->state = oldstate;
+			start = xip_currtime();
+		} else if (usec >= 1000000/HZ) {
+			/*
+			 * Try to save on CPU power when waiting delay
+			 * is at least a system timer tick period.
+			 * No need to be extremely accurate here.
+			 */
+			xip_cpu_idle();
+		}
+		status = map_read(map, adr);
+	} while (!map_word_andequal(map, status, OK, OK)
+		 && xip_elapsed_since(start) < usec);
+}
+
+#define UDELAY(map, chip, adr, usec)  xip_udelay(map, chip, adr, usec)
+
+/*
+ * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while
+ * the flash is actively programming or erasing since we have to poll for
+ * the operation to complete anyway.  We can't do that in a generic way with
+ * a XIP setup so do it before the actual flash operation in this case.
+ */
+#undef INVALIDATE_CACHED_RANGE
+#define INVALIDATE_CACHED_RANGE(x...)
+#define XIP_INVAL_CACHED_RANGE(map, from, size) \
+	do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0)
+
+/*
+ * Extra notes:
+ *
+ * Activating this XIP support changes the way the code works a bit.  For
+ * example the code to suspend the current process when concurrent access
+ * happens is never executed because xip_udelay() will always return with the
+ * same chip state as it was entered with.  This is why there is no care for
+ * the presence of add_wait_queue() or schedule() calls from within a couple
+ * xip_disable()'d  areas of code, like in do_erase_oneblock for example.
+ * The queueing and scheduling are always happening within xip_udelay().
+ *
+ * Similarly, get_chip() and put_chip() just happen to always be executed
+ * with chip->state set to FL_READY (or FL_XIP_WHILE_*) where flash state
+ * is in array mode, therefore never executing many cases therein and not
+ * causing any problem with XIP.
+ */
+
+#else
+
+#define xip_disable(map, chip, adr)
+#define xip_enable(map, chip, adr)
+
+#define UDELAY(map, chip, adr, usec)  cfi_udelay(usec)
+
+#define XIP_INVAL_CACHED_RANGE(x...)
+
+#endif
+
+static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
+{
+	unsigned long cmd_addr;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int ret = 0;
+
+	adr += chip->start;
+
+	/* Ensure cmd read/writes are aligned. */ 
+	cmd_addr = adr & ~(map_bankwidth(map)-1); 
+
+	spin_lock(chip->mutex);
+
+	ret = get_chip(map, chip, cmd_addr, FL_POINT);
+
+	if (!ret) {
+		if (chip->state != FL_POINT && chip->state != FL_READY)
+			map_write(map, CMD(0xff), cmd_addr);
+
+		chip->state = FL_POINT;
+		chip->ref_point_counter++;
+	}
+	spin_unlock(chip->mutex);
+
+	return ret;
+}
+
+static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+	int ret = 0;
+
+	if (!map->virt || (from + len > mtd->size))
+		return -EINVAL;
+	
+	*mtdbuf = (void *)map->virt + from;
+	*retlen = 0;
+
+	/* Now lock the chip(s) to POINT state */
+
+	/* ofs: offset within the first chip that the first read should start */
+	chipnum = (from >> cfi->chipshift);
+	ofs = from - (chipnum << cfi->chipshift);
+
+	while (len) {
+		unsigned long thislen;
+
+		if (chipnum >= cfi->numchips)
+			break;
+
+		if ((len + ofs -1) >> cfi->chipshift)
+			thislen = (1<<cfi->chipshift) - ofs;
+		else
+			thislen = len;
+
+		ret = do_point_onechip(map, &cfi->chips[chipnum], ofs, thislen);
+		if (ret)
+			break;
+
+		*retlen += thislen;
+		len -= thislen;
+		
+		ofs = 0;
+		chipnum++;
+	}
+	return 0;
+}
+
+static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+
+	/* Now unlock the chip(s) POINT state */
+
+	/* ofs: offset within the first chip that the first read should start */
+	chipnum = (from >> cfi->chipshift);
+	ofs = from - (chipnum <<  cfi->chipshift);
+
+	while (len) {
+		unsigned long thislen;
+		struct flchip *chip;
+
+		chip = &cfi->chips[chipnum];
+		if (chipnum >= cfi->numchips)
+			break;
+
+		if ((len + ofs -1) >> cfi->chipshift)
+			thislen = (1<<cfi->chipshift) - ofs;
+		else
+			thislen = len;
+
+		spin_lock(chip->mutex);
+		if (chip->state == FL_POINT) {
+			chip->ref_point_counter--;
+			if(chip->ref_point_counter == 0)
+				chip->state = FL_READY;
+		} else
+			printk(KERN_ERR "Warning: unpoint called on non pointed region\n"); /* Should this give an error? */
+
+		put_chip(map, chip, chip->start);
+		spin_unlock(chip->mutex);
+
+		len -= thislen;
+		ofs = 0;
+		chipnum++;
+	}
+}
+
+static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
+{
+	unsigned long cmd_addr;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int ret;
+
+	adr += chip->start;
+
+	/* Ensure cmd read/writes are aligned. */ 
+	cmd_addr = adr & ~(map_bankwidth(map)-1); 
+
+	spin_lock(chip->mutex);
+	ret = get_chip(map, chip, cmd_addr, FL_READY);
+	if (ret) {
+		spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	if (chip->state != FL_POINT && chip->state != FL_READY) {
+		map_write(map, CMD(0xff), cmd_addr);
+
+		chip->state = FL_READY;
+	}
+
+	map_copy_from(map, buf, adr, len);
+
+	put_chip(map, chip, cmd_addr);
+
+	spin_unlock(chip->mutex);
+	return 0;
+}
+
+static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+	int ret = 0;
+
+	/* ofs: offset within the first chip that the first read should start */
+	chipnum = (from >> cfi->chipshift);
+	ofs = from - (chipnum <<  cfi->chipshift);
+
+	*retlen = 0;
+
+	while (len) {
+		unsigned long thislen;
+
+		if (chipnum >= cfi->numchips)
+			break;
+
+		if ((len + ofs -1) >> cfi->chipshift)
+			thislen = (1<<cfi->chipshift) - ofs;
+		else
+			thislen = len;
+
+		ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf);
+		if (ret)
+			break;
+
+		*retlen += thislen;
+		len -= thislen;
+		buf += thislen;
+		
+		ofs = 0;
+		chipnum++;
+	}
+	return ret;
+}
+
+#if 0
+static int __xipram cfi_intelext_read_prot_reg (struct mtd_info *mtd,
+						loff_t from, size_t len,
+						size_t *retlen,
+						u_char *buf,
+						int base_offst, int reg_sz)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+	struct flchip *chip;
+	int ofs_factor = cfi->interleave * cfi->device_type;
+	int count = len;
+	int chip_num, offst;
+	int ret;
+
+	chip_num = ((unsigned int)from/reg_sz);
+	offst = from - (reg_sz*chip_num)+base_offst;
+
+	while (count) {
+	/* Calculate which chip & protection register offset we need */
+
+		if (chip_num >= cfi->numchips)
+			goto out;
+
+		chip = &cfi->chips[chip_num];
+		
+		spin_lock(chip->mutex);
+		ret = get_chip(map, chip, chip->start, FL_JEDEC_QUERY);
+		if (ret) {
+			spin_unlock(chip->mutex);
+			return (len-count)?:ret;
+		}
+
+		xip_disable(map, chip, chip->start);
+
+		if (chip->state != FL_JEDEC_QUERY) {
+			map_write(map, CMD(0x90), chip->start);
+			chip->state = FL_JEDEC_QUERY;
+		}
+
+		while (count && ((offst-base_offst) < reg_sz)) {
+			*buf = map_read8(map,(chip->start+((extp->ProtRegAddr+1)*ofs_factor)+offst));
+			buf++;
+			offst++;
+			count--;
+		}
+
+		xip_enable(map, chip, chip->start);
+		put_chip(map, chip, chip->start);
+		spin_unlock(chip->mutex);
+
+		/* Move on to the next chip */
+		chip_num++;
+		offst = base_offst;
+	}
+	
+ out:	
+	return len-count;
+}
+	
+static int cfi_intelext_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp=cfi->cmdset_priv;
+	int base_offst,reg_sz;
+	
+	/* Check that we actually have some protection registers */
+	if(!extp || !(extp->FeatureSupport&64)){
+		printk(KERN_WARNING "%s: This flash device has no protection data to read!\n",map->name);
+		return 0;
+	}
+
+	base_offst=(1<<extp->FactProtRegSize);
+	reg_sz=(1<<extp->UserProtRegSize);
+
+	return cfi_intelext_read_prot_reg(mtd, from, len, retlen, buf, base_offst, reg_sz);
+}
+
+static int cfi_intelext_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp=cfi->cmdset_priv;
+	int base_offst,reg_sz;
+	
+	/* Check that we actually have some protection registers */
+	if(!extp || !(extp->FeatureSupport&64)){
+		printk(KERN_WARNING "%s: This flash device has no protection data to read!\n",map->name);
+		return 0;
+	}
+
+	base_offst=0;
+	reg_sz=(1<<extp->FactProtRegSize);
+
+	return cfi_intelext_read_prot_reg(mtd, from, len, retlen, buf, base_offst, reg_sz);
+}
+#endif
+
+static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
+				     unsigned long adr, map_word datum)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo;
+	int z, ret=0;
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_WRITING);
+	if (ret) {
+		spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map));
+	ENABLE_VPP(map);
+	xip_disable(map, chip, adr);
+	map_write(map, CMD(0x40), adr);
+	map_write(map, datum, adr);
+	chip->state = FL_WRITING;
+
+	spin_unlock(chip->mutex);
+	INVALIDATE_CACHED_RANGE(map, adr, map_bankwidth(map));
+	UDELAY(map, chip, adr, chip->word_write_time);
+	spin_lock(chip->mutex);
+
+	timeo = jiffies + (HZ/2);
+	z = 0;
+	for (;;) {
+		if (chip->state != FL_WRITING) {
+			/* Someone's suspended the write. Sleep */
+			DECLARE_WAITQUEUE(wait, current);
+
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			spin_unlock(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ / 2); /* FIXME */
+			spin_lock(chip->mutex);
+			continue;
+		}
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			chip->state = FL_STATUS;
+			xip_enable(map, chip, adr);
+			printk(KERN_ERR "waiting for chip to be ready timed out in word write\n");
+			ret = -EIO;
+			goto out;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock(chip->mutex);
+		z++;
+		UDELAY(map, chip, adr, 1);
+		spin_lock(chip->mutex);
+	}
+	if (!z) {
+		chip->word_write_time--;
+		if (!chip->word_write_time)
+			chip->word_write_time++;
+	}
+	if (z > 1) 
+		chip->word_write_time++;
+
+	/* Done and happy. */
+	chip->state = FL_STATUS;
+
+	/* check for lock bit */
+	if (map_word_bitsset(map, status, CMD(0x02))) {
+		/* clear status */
+		map_write(map, CMD(0x50), adr);
+		/* put back into read status register mode */
+		map_write(map, CMD(0x70), adr);
+		ret = -EROFS;
+	}
+
+	xip_enable(map, chip, adr);
+ out:	put_chip(map, chip, adr);
+	spin_unlock(chip->mutex);
+
+	return ret;
+}
+
+
+static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t len, size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int ret = 0;
+	int chipnum;
+	unsigned long ofs;
+
+	*retlen = 0;
+	if (!len)
+		return 0;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to  - (chipnum << cfi->chipshift);
+
+	/* If it's not bus-aligned, do the first byte write */
+	if (ofs & (map_bankwidth(map)-1)) {
+		unsigned long bus_ofs = ofs & ~(map_bankwidth(map)-1);
+		int gap = ofs - bus_ofs;
+		int n;
+		map_word datum;
+
+		n = min_t(int, len, map_bankwidth(map)-gap);
+		datum = map_word_ff(map);
+		datum = map_word_load_partial(map, datum, buf, gap, n);
+
+		ret = do_write_oneword(map, &cfi->chips[chipnum],
+					       bus_ofs, datum);
+		if (ret) 
+			return ret;
+
+		len -= n;
+		ofs += n;
+		buf += n;
+		(*retlen) += n;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+	
+	while(len >= map_bankwidth(map)) {
+		map_word datum = map_word_load(map, buf);
+
+		ret = do_write_oneword(map, &cfi->chips[chipnum],
+				ofs, datum);
+		if (ret)
+			return ret;
+
+		ofs += map_bankwidth(map);
+		buf += map_bankwidth(map);
+		(*retlen) += map_bankwidth(map);
+		len -= map_bankwidth(map);
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+
+	if (len & (map_bankwidth(map)-1)) {
+		map_word datum;
+
+		datum = map_word_ff(map);
+		datum = map_word_load_partial(map, datum, buf, 0, len);
+
+		ret = do_write_oneword(map, &cfi->chips[chipnum],
+					       ofs, datum);
+		if (ret) 
+			return ret;
+		
+		(*retlen) += len;
+	}
+
+	return 0;
+}
+
+
+static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, 
+				    unsigned long adr, const u_char *buf, int len)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long cmd_adr, timeo;
+	int wbufsize, z, ret=0, bytes, words;
+
+	wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+	adr += chip->start;
+	cmd_adr = adr & ~(wbufsize-1);
+	
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	spin_lock(chip->mutex);
+	ret = get_chip(map, chip, cmd_adr, FL_WRITING);
+	if (ret) {
+		spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	XIP_INVAL_CACHED_RANGE(map, adr, len);
+	ENABLE_VPP(map);
+	xip_disable(map, chip, cmd_adr);
+
+	/* �4.8 of the 28FxxxJ3A datasheet says "Any time SR.4 and/or SR.5 is set
+	   [...], the device will not accept any more Write to Buffer commands". 
+	   So we must check here and reset those bits if they're set. Otherwise
+	   we're just pissing in the wind */
+	if (chip->state != FL_STATUS)
+		map_write(map, CMD(0x70), cmd_adr);
+	status = map_read(map, cmd_adr);
+	if (map_word_bitsset(map, status, CMD(0x30))) {
+		xip_enable(map, chip, cmd_adr);
+		printk(KERN_WARNING "SR.4 or SR.5 bits set in buffer write (status %lx). Clearing.\n", status.x[0]);
+		xip_disable(map, chip, cmd_adr);
+		map_write(map, CMD(0x50), cmd_adr);
+		map_write(map, CMD(0x70), cmd_adr);
+	}
+
+	chip->state = FL_WRITING_TO_BUFFER;
+
+	z = 0;
+	for (;;) {
+		map_write(map, CMD(0xe8), cmd_adr);
+
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+
+		spin_unlock(chip->mutex);
+		UDELAY(map, chip, cmd_adr, 1);
+		spin_lock(chip->mutex);
+
+		if (++z > 20) {
+			/* Argh. Not ready for write to buffer */
+			map_word Xstatus;
+			map_write(map, CMD(0x70), cmd_adr);
+			chip->state = FL_STATUS;
+			Xstatus = map_read(map, cmd_adr);
+			/* Odd. Clear status bits */
+			map_write(map, CMD(0x50), cmd_adr);
+			map_write(map, CMD(0x70), cmd_adr);
+			xip_enable(map, chip, cmd_adr);
+			printk(KERN_ERR "Chip not ready for buffer write. status = %lx, Xstatus = %lx\n",
+			       status.x[0], Xstatus.x[0]);
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	/* Write length of data to come */
+	bytes = len & (map_bankwidth(map)-1);
+	words = len / map_bankwidth(map);
+	map_write(map, CMD(words - !bytes), cmd_adr );
+
+	/* Write data */
+	z = 0;
+	while(z < words * map_bankwidth(map)) {
+		map_word datum = map_word_load(map, buf);
+		map_write(map, datum, adr+z);
+
+		z += map_bankwidth(map);
+		buf += map_bankwidth(map);
+	}
+
+	if (bytes) {
+		map_word datum;
+
+		datum = map_word_ff(map);
+		datum = map_word_load_partial(map, datum, buf, 0, bytes);
+		map_write(map, datum, adr+z);
+	}
+
+	/* GO GO GO */
+	map_write(map, CMD(0xd0), cmd_adr);
+	chip->state = FL_WRITING;
+
+	spin_unlock(chip->mutex);
+	INVALIDATE_CACHED_RANGE(map, adr, len);
+	UDELAY(map, chip, cmd_adr, chip->buffer_write_time);
+	spin_lock(chip->mutex);
+
+	timeo = jiffies + (HZ/2);
+	z = 0;
+	for (;;) {
+		if (chip->state != FL_WRITING) {
+			/* Someone's suspended the write. Sleep */
+			DECLARE_WAITQUEUE(wait, current);
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			spin_unlock(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ / 2); /* FIXME */
+			spin_lock(chip->mutex);
+			continue;
+		}
+
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			chip->state = FL_STATUS;
+			xip_enable(map, chip, cmd_adr);
+			printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n");
+			ret = -EIO;
+			goto out;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock(chip->mutex);
+		UDELAY(map, chip, cmd_adr, 1);
+		z++;
+		spin_lock(chip->mutex);
+	}
+	if (!z) {
+		chip->buffer_write_time--;
+		if (!chip->buffer_write_time)
+			chip->buffer_write_time++;
+	}
+	if (z > 1) 
+		chip->buffer_write_time++;
+
+	/* Done and happy. */
+ 	chip->state = FL_STATUS;
+
+	/* check for lock bit */
+	if (map_word_bitsset(map, status, CMD(0x02))) {
+		/* clear status */
+		map_write(map, CMD(0x50), cmd_adr);
+		/* put back into read status register mode */
+		map_write(map, CMD(0x70), adr);
+		ret = -EROFS;
+	}
+
+	xip_enable(map, chip, cmd_adr);
+ out:	put_chip(map, chip, cmd_adr);
+	spin_unlock(chip->mutex);
+	return ret;
+}
+
+static int cfi_intelext_write_buffers (struct mtd_info *mtd, loff_t to, 
+				       size_t len, size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+	int ret = 0;
+	int chipnum;
+	unsigned long ofs;
+
+	*retlen = 0;
+	if (!len)
+		return 0;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to  - (chipnum << cfi->chipshift);
+
+	/* If it's not bus-aligned, do the first word write */
+	if (ofs & (map_bankwidth(map)-1)) {
+		size_t local_len = (-ofs)&(map_bankwidth(map)-1);
+		if (local_len > len)
+			local_len = len;
+		ret = cfi_intelext_write_words(mtd, to, local_len,
+					       retlen, buf);
+		if (ret)
+			return ret;
+		ofs += local_len;
+		buf += local_len;
+		len -= local_len;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++;
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+
+	while(len) {
+		/* We must not cross write block boundaries */
+		int size = wbufsize - (ofs & (wbufsize-1));
+
+		if (size > len)
+			size = len;
+		ret = do_write_buffer(map, &cfi->chips[chipnum], 
+				      ofs, buf, size);
+		if (ret)
+			return ret;
+
+		ofs += size;
+		buf += size;
+		(*retlen) += size;
+		len -= size;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+	return 0;
+}
+
+static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
+				      unsigned long adr, int len, void *thunk)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo;
+	int retries = 3;
+	DECLARE_WAITQUEUE(wait, current);
+	int ret = 0;
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+ retry:
+	spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_ERASING);
+	if (ret) {
+		spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	XIP_INVAL_CACHED_RANGE(map, adr, len);
+	ENABLE_VPP(map);
+	xip_disable(map, chip, adr);
+
+	/* Clear the status register first */
+	map_write(map, CMD(0x50), adr);
+
+	/* Now erase */
+	map_write(map, CMD(0x20), adr);
+	map_write(map, CMD(0xD0), adr);
+	chip->state = FL_ERASING;
+	chip->erase_suspended = 0;
+
+	spin_unlock(chip->mutex);
+	INVALIDATE_CACHED_RANGE(map, adr, len);
+	UDELAY(map, chip, adr, chip->erase_time*1000/2);
+	spin_lock(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*20);
+	for (;;) {
+		if (chip->state != FL_ERASING) {
+			/* Someone's suspended the erase. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			spin_unlock(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			spin_lock(chip->mutex);
+			continue;
+		}
+		if (chip->erase_suspended) {
+			/* This erase was suspended and resumed.
+			   Adjust the timeout */
+			timeo = jiffies + (HZ*20); /* FIXME */
+			chip->erase_suspended = 0;
+		}
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_word Xstatus;
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			Xstatus = map_read(map, adr);
+			/* Clear status bits */
+			map_write(map, CMD(0x50), adr);
+			map_write(map, CMD(0x70), adr);
+			xip_enable(map, chip, adr);
+			printk(KERN_ERR "waiting for erase at %08lx to complete timed out. status = %lx, Xstatus = %lx.\n",
+			       adr, status.x[0], Xstatus.x[0]);
+			ret = -EIO;
+			goto out;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock(chip->mutex);
+		UDELAY(map, chip, adr, 1000000/HZ);
+		spin_lock(chip->mutex);
+	}
+
+	/* We've broken this before. It doesn't hurt to be safe */
+	map_write(map, CMD(0x70), adr);
+	chip->state = FL_STATUS;
+	status = map_read(map, adr);
+
+	/* check for lock bit */
+	if (map_word_bitsset(map, status, CMD(0x3a))) {
+		unsigned char chipstatus;
+
+		/* Reset the error bits */
+		map_write(map, CMD(0x50), adr);
+		map_write(map, CMD(0x70), adr);
+		xip_enable(map, chip, adr);
+
+		chipstatus = status.x[0];
+		if (!map_word_equal(map, status, CMD(chipstatus))) {
+			int i, w;
+			for (w=0; w<map_words(map); w++) {
+				for (i = 0; i<cfi_interleave(cfi); i++) {
+					chipstatus |= status.x[w] >> (cfi->device_type * 8);
+				}
+			}
+			printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n",
+			       status.x[0], chipstatus);
+		}
+
+		if ((chipstatus & 0x30) == 0x30) {
+			printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);
+			ret = -EIO;
+		} else if (chipstatus & 0x02) {
+			/* Protection bit set */
+			ret = -EROFS;
+		} else if (chipstatus & 0x8) {
+			/* Voltage */
+			printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus);
+			ret = -EIO;
+		} else if (chipstatus & 0x20) {
+			if (retries--) {
+				printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus);
+				timeo = jiffies + HZ;
+				put_chip(map, chip, adr);
+				spin_unlock(chip->mutex);
+				goto retry;
+			}
+			printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus);
+			ret = -EIO;
+		}
+	} else {
+		xip_enable(map, chip, adr);
+		ret = 0;
+	}
+
+ out:	put_chip(map, chip, adr);
+	spin_unlock(chip->mutex);
+	return ret;
+}
+
+int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+{
+	unsigned long ofs, len;
+	int ret;
+
+	ofs = instr->addr;
+	len = instr->len;
+
+	ret = cfi_varsize_frob(mtd, do_erase_oneblock, ofs, len, NULL);
+	if (ret)
+		return ret;
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	
+	return 0;
+}
+
+static void cfi_intelext_sync (struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+		spin_lock(chip->mutex);
+		ret = get_chip(map, chip, chip->start, FL_SYNCING);
+
+		if (!ret) {
+			chip->oldstate = chip->state;
+			chip->state = FL_SYNCING;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		}
+		spin_unlock(chip->mutex);
+	}
+
+	/* Unlock the chips again */
+
+	for (i--; i >=0; i--) {
+		chip = &cfi->chips[i];
+
+		spin_lock(chip->mutex);
+		
+		if (chip->state == FL_SYNCING) {
+			chip->state = chip->oldstate;
+			wake_up(&chip->wq);
+		}
+		spin_unlock(chip->mutex);
+	}
+}
+
+#ifdef DEBUG_LOCK_BITS
+static int __xipram do_printlockstatus_oneblock(struct map_info *map,
+						struct flchip *chip,
+						unsigned long adr,
+						int len, void *thunk)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	int status, ofs_factor = cfi->interleave * cfi->device_type;
+
+	xip_disable(map, chip, adr+(2*ofs_factor));
+	cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+	chip->state = FL_JEDEC_QUERY;
+	status = cfi_read_query(map, adr+(2*ofs_factor));
+	xip_enable(map, chip, 0);
+	printk(KERN_DEBUG "block status register for 0x%08lx is %x\n",
+	       adr, status);
+	return 0;
+}
+#endif
+
+#define DO_XXLOCK_ONEBLOCK_LOCK		((void *) 1)
+#define DO_XXLOCK_ONEBLOCK_UNLOCK	((void *) 2)
+
+static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip,
+				       unsigned long adr, int len, void *thunk)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo = jiffies + HZ;
+	int ret;
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_LOCKING);
+	if (ret) {
+		spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	ENABLE_VPP(map);
+	xip_disable(map, chip, adr);
+	
+	map_write(map, CMD(0x60), adr);
+	if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) {
+		map_write(map, CMD(0x01), adr);
+		chip->state = FL_LOCKING;
+	} else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) {
+		map_write(map, CMD(0xD0), adr);
+		chip->state = FL_UNLOCKING;
+	} else
+		BUG();
+
+	spin_unlock(chip->mutex);
+	UDELAY(map, chip, adr, 1000000/HZ);
+	spin_lock(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*20);
+	for (;;) {
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_word Xstatus;
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			Xstatus = map_read(map, adr);
+			xip_enable(map, chip, adr);
+			printk(KERN_ERR "waiting for unlock to complete timed out. status = %lx, Xstatus = %lx.\n",
+			       status.x[0], Xstatus.x[0]);
+			put_chip(map, chip, adr);
+			spin_unlock(chip->mutex);
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock(chip->mutex);
+		UDELAY(map, chip, adr, 1);
+		spin_lock(chip->mutex);
+	}
+	
+	/* Done and happy. */
+	chip->state = FL_STATUS;
+	xip_enable(map, chip, adr);
+	put_chip(map, chip, adr);
+	spin_unlock(chip->mutex);
+	return 0;
+}
+
+static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	int ret;
+
+#ifdef DEBUG_LOCK_BITS
+	printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
+	       __FUNCTION__, ofs, len);
+	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
+		ofs, len, 0);
+#endif
+
+	ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, 
+		ofs, len, DO_XXLOCK_ONEBLOCK_LOCK);
+	
+#ifdef DEBUG_LOCK_BITS
+	printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
+	       __FUNCTION__, ret);
+	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
+		ofs, len, 0);
+#endif
+
+	return ret;
+}
+
+static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	int ret;
+
+#ifdef DEBUG_LOCK_BITS
+	printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
+	       __FUNCTION__, ofs, len);
+	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
+		ofs, len, 0);
+#endif
+
+	ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
+					ofs, len, DO_XXLOCK_ONEBLOCK_UNLOCK);
+	
+#ifdef DEBUG_LOCK_BITS
+	printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
+	       __FUNCTION__, ret);
+	cfi_varsize_frob(mtd, do_printlockstatus_oneblock, 
+		ofs, len, 0);
+#endif
+	
+	return ret;
+}
+
+static int cfi_intelext_suspend(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+		spin_lock(chip->mutex);
+
+		switch (chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			if (chip->oldstate == FL_READY) {
+				chip->oldstate = chip->state;
+				chip->state = FL_PM_SUSPENDED;
+				/* No need to wake_up() on this state change - 
+				 * as the whole point is that nobody can do anything
+				 * with the chip now anyway.
+				 */
+			} else {
+				/* There seems to be an operation pending. We must wait for it. */
+				printk(KERN_NOTICE "Flash device refused suspend due to pending operation (oldstate %d)\n", chip->oldstate);
+				ret = -EAGAIN;
+			}
+			break;
+		default:
+			/* Should we actually wait? Once upon a time these routines weren't
+			   allowed to. Or should we return -EAGAIN, because the upper layers
+			   ought to have already shut down anything which was using the device
+			   anyway? The latter for now. */
+			printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->oldstate);
+			ret = -EAGAIN;
+		case FL_PM_SUSPENDED:
+			break;
+		}
+		spin_unlock(chip->mutex);
+	}
+
+	/* Unlock the chips again */
+
+	if (ret) {
+		for (i--; i >=0; i--) {
+			chip = &cfi->chips[i];
+			
+			spin_lock(chip->mutex);
+			
+			if (chip->state == FL_PM_SUSPENDED) {
+				/* No need to force it into a known state here,
+				   because we're returning failure, and it didn't
+				   get power cycled */
+				chip->state = chip->oldstate;
+				chip->oldstate = FL_READY;
+				wake_up(&chip->wq);
+			}
+			spin_unlock(chip->mutex);
+		}
+	} 
+	
+	return ret;
+}
+
+static void cfi_intelext_resume(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+
+	for (i=0; i<cfi->numchips; i++) {
+	
+		chip = &cfi->chips[i];
+
+		spin_lock(chip->mutex);
+		
+		/* Go to known state. Chip may have been power cycled */
+		if (chip->state == FL_PM_SUSPENDED) {
+			map_write(map, CMD(0xFF), cfi->chips[i].start);
+			chip->oldstate = chip->state = FL_READY;
+			wake_up(&chip->wq);
+		}
+
+		spin_unlock(chip->mutex);
+	}
+}
+
+static void cfi_intelext_destroy(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	kfree(cfi->cmdset_priv);
+	kfree(cfi->cfiq);
+	kfree(cfi->chips[0].priv);
+	kfree(cfi);
+	kfree(mtd->eraseregions);
+}
+
+static char im_name_1[]="cfi_cmdset_0001";
+static char im_name_3[]="cfi_cmdset_0003";
+
+static int __init cfi_intelext_init(void)
+{
+	inter_module_register(im_name_1, THIS_MODULE, &cfi_cmdset_0001);
+	inter_module_register(im_name_3, THIS_MODULE, &cfi_cmdset_0001);
+	return 0;
+}
+
+static void __exit cfi_intelext_exit(void)
+{
+	inter_module_unregister(im_name_1);
+	inter_module_unregister(im_name_3);
+}
+
+module_init(cfi_intelext_init);
+module_exit(cfi_intelext_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
+MODULE_DESCRIPTION("MTD chip driver for Intel/Sharp flash chips");
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
new file mode 100644
index 000000000000..fca8ff6f7e14
--- /dev/null
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -0,0 +1,1515 @@
+/*
+ * Common Flash Interface support:
+ *   AMD & Fujitsu Standard Vendor Command Set (ID 0x0002)
+ *
+ * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp>
+ * Copyright (C) 2004 Arcom Control Systems Ltd <linux@arcom.com>
+ *
+ * 2_by_8 routines added by Simon Munton
+ *
+ * 4_by_16 work by Carolyn J. Smith
+ *
+ * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
+ *
+ * This code is GPL
+ *
+ * $Id: cfi_cmdset_0002.c,v 1.114 2004/12/11 15:43:53 dedekind Exp $
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/cfi.h>
+
+#define AMD_BOOTLOC_BUG
+#define FORCE_WORD_WRITE 0
+
+#define MAX_WORD_RETRIES 3
+
+#define MANUFACTURER_AMD	0x0001
+#define MANUFACTURER_SST	0x00BF
+#define SST49LF004B	        0x0060
+
+static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+static void cfi_amdstd_sync (struct mtd_info *);
+static int cfi_amdstd_suspend (struct mtd_info *);
+static void cfi_amdstd_resume (struct mtd_info *);
+static int cfi_amdstd_secsi_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+
+static void cfi_amdstd_destroy(struct mtd_info *);
+
+struct mtd_info *cfi_cmdset_0002(struct map_info *, int);
+static struct mtd_info *cfi_amdstd_setup (struct mtd_info *);
+
+static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
+static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr);
+#include "fwh_lock.h"
+
+static struct mtd_chip_driver cfi_amdstd_chipdrv = {
+	.probe		= NULL, /* Not usable directly */
+	.destroy	= cfi_amdstd_destroy,
+	.name		= "cfi_cmdset_0002",
+	.module		= THIS_MODULE
+};
+
+
+/* #define DEBUG_CFI_FEATURES */
+
+
+#ifdef DEBUG_CFI_FEATURES
+static void cfi_tell_features(struct cfi_pri_amdstd *extp)
+{
+	const char* erase_suspend[3] = {
+		"Not supported", "Read only", "Read/write"
+	};
+	const char* top_bottom[6] = {
+		"No WP", "8x8KiB sectors at top & bottom, no WP",
+		"Bottom boot", "Top boot",
+		"Uniform, Bottom WP", "Uniform, Top WP"
+	};
+
+	printk("  Silicon revision: %d\n", extp->SiliconRevision >> 1);
+	printk("  Address sensitive unlock: %s\n", 
+	       (extp->SiliconRevision & 1) ? "Not required" : "Required");
+
+	if (extp->EraseSuspend < ARRAY_SIZE(erase_suspend))
+		printk("  Erase Suspend: %s\n", erase_suspend[extp->EraseSuspend]);
+	else
+		printk("  Erase Suspend: Unknown value %d\n", extp->EraseSuspend);
+
+	if (extp->BlkProt == 0)
+		printk("  Block protection: Not supported\n");
+	else
+		printk("  Block protection: %d sectors per group\n", extp->BlkProt);
+
+
+	printk("  Temporary block unprotect: %s\n",
+	       extp->TmpBlkUnprotect ? "Supported" : "Not supported");
+	printk("  Block protect/unprotect scheme: %d\n", extp->BlkProtUnprot);
+	printk("  Number of simultaneous operations: %d\n", extp->SimultaneousOps);
+	printk("  Burst mode: %s\n",
+	       extp->BurstMode ? "Supported" : "Not supported");
+	if (extp->PageMode == 0)
+		printk("  Page mode: Not supported\n");
+	else
+		printk("  Page mode: %d word page\n", extp->PageMode << 2);
+
+	printk("  Vpp Supply Minimum Program/Erase Voltage: %d.%d V\n", 
+	       extp->VppMin >> 4, extp->VppMin & 0xf);
+	printk("  Vpp Supply Maximum Program/Erase Voltage: %d.%d V\n", 
+	       extp->VppMax >> 4, extp->VppMax & 0xf);
+
+	if (extp->TopBottom < ARRAY_SIZE(top_bottom))
+		printk("  Top/Bottom Boot Block: %s\n", top_bottom[extp->TopBottom]);
+	else
+		printk("  Top/Bottom Boot Block: Unknown value %d\n", extp->TopBottom);
+}
+#endif
+
+#ifdef AMD_BOOTLOC_BUG
+/* Wheee. Bring me the head of someone at AMD. */
+static void fixup_amd_bootblock(struct mtd_info *mtd, void* param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+	__u8 major = extp->MajorVersion;
+	__u8 minor = extp->MinorVersion;
+
+	if (((major << 8) | minor) < 0x3131) {
+		/* CFI version 1.0 => don't trust bootloc */
+		if (cfi->id & 0x80) {
+			printk(KERN_WARNING "%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table.\n", map->name, cfi->id);
+			extp->TopBottom = 3;	/* top boot */
+		} else {
+			extp->TopBottom = 2;	/* bottom boot */
+		}
+	}
+}
+#endif
+
+static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	if (cfi->cfiq->BufWriteTimeoutTyp) {
+		DEBUG(MTD_DEBUG_LEVEL1, "Using buffer write method\n" );
+		mtd->write = cfi_amdstd_write_buffers;
+	}
+}
+
+static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+{
+	/* Setup for chips with a secsi area */
+	mtd->read_user_prot_reg = cfi_amdstd_secsi_read;
+	mtd->read_fact_prot_reg = cfi_amdstd_secsi_read;
+}
+
+static void fixup_use_erase_chip(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	if ((cfi->cfiq->NumEraseRegions == 1) &&
+		((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0)) {
+		mtd->erase = cfi_amdstd_erase_chip;
+	}
+	
+}
+
+static struct cfi_fixup cfi_fixup_table[] = {
+#ifdef AMD_BOOTLOC_BUG
+	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+#endif
+	{ CFI_MFR_AMD, 0x0050, fixup_use_secsi, NULL, },
+	{ CFI_MFR_AMD, 0x0053, fixup_use_secsi, NULL, },
+	{ CFI_MFR_AMD, 0x0055, fixup_use_secsi, NULL, },
+	{ CFI_MFR_AMD, 0x0056, fixup_use_secsi, NULL, },
+	{ CFI_MFR_AMD, 0x005C, fixup_use_secsi, NULL, },
+	{ CFI_MFR_AMD, 0x005F, fixup_use_secsi, NULL, },
+#if !FORCE_WORD_WRITE
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+#endif
+	{ 0, 0, NULL, NULL }
+};
+static struct cfi_fixup jedec_fixup_table[] = {
+	{ MANUFACTURER_SST, SST49LF004B, fixup_use_fwh_lock, NULL, },
+	{ 0, 0, NULL, NULL }
+};
+
+static struct cfi_fixup fixup_table[] = {
+	/* The CFI vendor ids and the JEDEC vendor IDs appear
+	 * to be common.  It is like the devices id's are as
+	 * well.  This table is to pick all cases where
+	 * we know that is the case.
+	 */
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
+	{ 0, 0, NULL, NULL }
+};
+
+
+struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct mtd_info *mtd;
+	int i;
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if (!mtd) {
+		printk(KERN_WARNING "Failed to allocate memory for MTD device\n");
+		return NULL;
+	}
+	memset(mtd, 0, sizeof(*mtd));
+	mtd->priv = map;
+	mtd->type = MTD_NORFLASH;
+
+	/* Fill in the default mtd operations */
+	mtd->erase   = cfi_amdstd_erase_varsize;
+	mtd->write   = cfi_amdstd_write_words;
+	mtd->read    = cfi_amdstd_read;
+	mtd->sync    = cfi_amdstd_sync;
+	mtd->suspend = cfi_amdstd_suspend;
+	mtd->resume  = cfi_amdstd_resume;
+	mtd->flags   = MTD_CAP_NORFLASH;
+	mtd->name    = map->name;
+
+	if (cfi->cfi_mode==CFI_MODE_CFI){
+		unsigned char bootloc;
+		/* 
+		 * It's a real CFI chip, not one for which the probe
+		 * routine faked a CFI structure. So we read the feature
+		 * table from it.
+		 */
+		__u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR;
+		struct cfi_pri_amdstd *extp;
+
+		extp = (struct cfi_pri_amdstd*)cfi_read_pri(map, adr, sizeof(*extp), "Amd/Fujitsu");
+		if (!extp) {
+			kfree(mtd);
+			return NULL;
+		}
+
+		/* Install our own private info structure */
+		cfi->cmdset_priv = extp;	
+
+		/* Apply cfi device specific fixups */
+		cfi_fixup(mtd, cfi_fixup_table);
+
+#ifdef DEBUG_CFI_FEATURES
+		/* Tell the user about it in lots of lovely detail */
+		cfi_tell_features(extp);
+#endif	
+
+		bootloc = extp->TopBottom;
+		if ((bootloc != 2) && (bootloc != 3)) {
+			printk(KERN_WARNING "%s: CFI does not contain boot "
+			       "bank location. Assuming top.\n", map->name);
+			bootloc = 2;
+		}
+
+		if (bootloc == 3 && cfi->cfiq->NumEraseRegions > 1) {
+			printk(KERN_WARNING "%s: Swapping erase regions for broken CFI table.\n", map->name);
+			
+			for (i=0; i<cfi->cfiq->NumEraseRegions / 2; i++) {
+				int j = (cfi->cfiq->NumEraseRegions-1)-i;
+				__u32 swap;
+				
+				swap = cfi->cfiq->EraseRegionInfo[i];
+				cfi->cfiq->EraseRegionInfo[i] = cfi->cfiq->EraseRegionInfo[j];
+				cfi->cfiq->EraseRegionInfo[j] = swap;
+			}
+		}
+		/* Set the default CFI lock/unlock addresses */
+		cfi->addr_unlock1 = 0x555;
+		cfi->addr_unlock2 = 0x2aa;
+		/* Modify the unlock address if we are in compatibility mode */
+		if (	/* x16 in x8 mode */
+			((cfi->device_type == CFI_DEVICETYPE_X8) && 
+				(cfi->cfiq->InterfaceDesc == 2)) ||
+			/* x32 in x16 mode */
+			((cfi->device_type == CFI_DEVICETYPE_X16) &&
+				(cfi->cfiq->InterfaceDesc == 4))) 
+		{
+			cfi->addr_unlock1 = 0xaaa;
+			cfi->addr_unlock2 = 0x555;
+		}
+
+	} /* CFI mode */
+	else if (cfi->cfi_mode == CFI_MODE_JEDEC) {
+		/* Apply jedec specific fixups */
+		cfi_fixup(mtd, jedec_fixup_table);
+	}
+	/* Apply generic fixups */
+	cfi_fixup(mtd, fixup_table);
+
+	for (i=0; i< cfi->numchips; i++) {
+		cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
+		cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
+		cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
+	}		
+	
+	map->fldrv = &cfi_amdstd_chipdrv;
+	
+	return cfi_amdstd_setup(mtd);
+}
+
+
+static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave;
+	unsigned long offset = 0;
+	int i,j;
+
+	printk(KERN_NOTICE "number of %s chips: %d\n", 
+	       (cfi->cfi_mode == CFI_MODE_CFI)?"CFI":"JEDEC",cfi->numchips);
+	/* Select the correct geometry setup */ 
+	mtd->size = devsize * cfi->numchips;
+
+	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
+	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
+				    * mtd->numeraseregions, GFP_KERNEL);
+	if (!mtd->eraseregions) { 
+		printk(KERN_WARNING "Failed to allocate memory for MTD erase region info\n");
+		goto setup_err;
+	}
+			
+	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
+		unsigned long ernum, ersize;
+		ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave;
+		ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1;
+			
+		if (mtd->erasesize < ersize) {
+			mtd->erasesize = ersize;
+		}
+		for (j=0; j<cfi->numchips; j++) {
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum;
+		}
+		offset += (ersize * ernum);
+	}
+	if (offset != devsize) {
+		/* Argh */
+		printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
+		goto setup_err;
+	}
+#if 0
+	// debug
+	for (i=0; i<mtd->numeraseregions;i++){
+		printk("%d: offset=0x%x,size=0x%x,blocks=%d\n",
+		       i,mtd->eraseregions[i].offset,
+		       mtd->eraseregions[i].erasesize,
+		       mtd->eraseregions[i].numblocks);
+	}
+#endif
+
+	/* FIXME: erase-suspend-program is broken.  See
+	   http://lists.infradead.org/pipermail/linux-mtd/2003-December/009001.html */
+	printk(KERN_NOTICE "cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.\n");
+
+	__module_get(THIS_MODULE);
+	return mtd;
+
+ setup_err:
+	if(mtd) {
+		if(mtd->eraseregions)
+			kfree(mtd->eraseregions);
+		kfree(mtd);
+	}
+	kfree(cfi->cmdset_priv);
+	kfree(cfi->cfiq);
+	return NULL;
+}
+
+/*
+ * Return true if the chip is ready.
+ *
+ * Ready is one of: read mode, query mode, erase-suspend-read mode (in any
+ * non-suspended sector) and is indicated by no toggle bits toggling.
+ *
+ * Note that anything more complicated than checking if no bits are toggling
+ * (including checking DQ5 for an error status) is tricky to get working
+ * correctly and is therefore not done	(particulary with interleaved chips
+ * as each chip must be checked independantly of the others).
+ */
+static int chip_ready(struct map_info *map, unsigned long addr)
+{
+	map_word d, t;
+
+	d = map_read(map, addr);
+	t = map_read(map, addr);
+
+	return map_word_equal(map, d, t);
+}
+
+static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long timeo;
+	struct cfi_pri_amdstd *cfip = (struct cfi_pri_amdstd *)cfi->cmdset_priv;
+
+ resettime:
+	timeo = jiffies + HZ;
+ retry:
+	switch (chip->state) {
+
+	case FL_STATUS:
+		for (;;) {
+			if (chip_ready(map, adr))
+				break;
+
+			if (time_after(jiffies, timeo)) {
+				printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
+				cfi_spin_unlock(chip->mutex);
+				return -EIO;
+			}
+			cfi_spin_unlock(chip->mutex);
+			cfi_udelay(1);
+			cfi_spin_lock(chip->mutex);
+			/* Someone else might have been playing with it. */
+			goto retry;
+		}
+				
+	case FL_READY:
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+		return 0;
+
+	case FL_ERASING:
+		if (mode == FL_WRITING) /* FIXME: Erase-suspend-program appears broken. */
+			goto sleep;
+
+		if (!(mode == FL_READY || mode == FL_POINT
+		      || !cfip
+		      || (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))
+		      || (mode == FL_WRITING && (cfip->EraseSuspend & 0x1))))
+			goto sleep;
+
+		/* We could check to see if we're trying to access the sector
+		 * that is currently being erased. However, no user will try
+		 * anything like that so we just wait for the timeout. */
+
+		/* Erase suspend */
+		/* It's harmless to issue the Erase-Suspend and Erase-Resume
+		 * commands when the erase algorithm isn't in progress. */
+		map_write(map, CMD(0xB0), chip->in_progress_block_addr);
+		chip->oldstate = FL_ERASING;
+		chip->state = FL_ERASE_SUSPENDING;
+		chip->erase_suspended = 1;
+		for (;;) {
+			if (chip_ready(map, adr))
+				break;
+
+			if (time_after(jiffies, timeo)) {
+				/* Should have suspended the erase by now.
+				 * Send an Erase-Resume command as either
+				 * there was an error (so leave the erase
+				 * routine to recover from it) or we trying to
+				 * use the erase-in-progress sector. */
+				map_write(map, CMD(0x30), chip->in_progress_block_addr);
+				chip->state = FL_ERASING;
+				chip->oldstate = FL_READY;
+				printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__);
+				return -EIO;
+			}
+			
+			cfi_spin_unlock(chip->mutex);
+			cfi_udelay(1);
+			cfi_spin_lock(chip->mutex);
+			/* Nobody will touch it while it's in state FL_ERASE_SUSPENDING.
+			   So we can just loop here. */
+		}
+		chip->state = FL_READY;
+		return 0;
+
+	case FL_POINT:
+		/* Only if there's no operation suspended... */
+		if (mode == FL_READY && chip->oldstate == FL_READY)
+			return 0;
+
+	default:
+	sleep:
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		cfi_spin_unlock(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		cfi_spin_lock(chip->mutex);
+		goto resettime;
+	}
+}
+
+
+static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	switch(chip->oldstate) {
+	case FL_ERASING:
+		chip->state = chip->oldstate;
+		map_write(map, CMD(0x30), chip->in_progress_block_addr);
+		chip->oldstate = FL_READY;
+		chip->state = FL_ERASING;
+		break;
+
+	case FL_READY:
+	case FL_STATUS:
+		/* We should really make set_vpp() count, rather than doing this */
+		DISABLE_VPP(map);
+		break;
+	default:
+		printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
+	}
+	wake_up(&chip->wq);
+}
+
+
+static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
+{
+	unsigned long cmd_addr;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int ret;
+
+	adr += chip->start;
+
+	/* Ensure cmd read/writes are aligned. */ 
+	cmd_addr = adr & ~(map_bankwidth(map)-1); 
+
+	cfi_spin_lock(chip->mutex);
+	ret = get_chip(map, chip, cmd_addr, FL_READY);
+	if (ret) {
+		cfi_spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	if (chip->state != FL_POINT && chip->state != FL_READY) {
+		map_write(map, CMD(0xf0), cmd_addr);
+		chip->state = FL_READY;
+	}
+
+	map_copy_from(map, buf, adr, len);
+
+	put_chip(map, chip, cmd_addr);
+
+	cfi_spin_unlock(chip->mutex);
+	return 0;
+}
+
+
+static int cfi_amdstd_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+	int ret = 0;
+
+	/* ofs: offset within the first chip that the first read should start */
+
+	chipnum = (from >> cfi->chipshift);
+	ofs = from - (chipnum <<  cfi->chipshift);
+
+
+	*retlen = 0;
+
+	while (len) {
+		unsigned long thislen;
+
+		if (chipnum >= cfi->numchips)
+			break;
+
+		if ((len + ofs -1) >> cfi->chipshift)
+			thislen = (1<<cfi->chipshift) - ofs;
+		else
+			thislen = len;
+
+		ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf);
+		if (ret)
+			break;
+
+		*retlen += thislen;
+		len -= thislen;
+		buf += thislen;
+
+		ofs = 0;
+		chipnum++;
+	}
+	return ret;
+}
+
+
+static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	unsigned long timeo = jiffies + HZ;
+	struct cfi_private *cfi = map->fldrv_priv;
+
+ retry:
+	cfi_spin_lock(chip->mutex);
+
+	if (chip->state != FL_READY){
+#if 0
+		printk(KERN_DEBUG "Waiting for chip to read, status = %d\n", chip->state);
+#endif
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		
+		cfi_spin_unlock(chip->mutex);
+
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+#if 0
+		if(signal_pending(current))
+			return -EINTR;
+#endif
+		timeo = jiffies + HZ;
+
+		goto retry;
+	}	
+
+	adr += chip->start;
+
+	chip->state = FL_READY;
+
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x88, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	
+	map_copy_from(map, buf, adr, len);
+
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	
+	wake_up(&chip->wq);
+	cfi_spin_unlock(chip->mutex);
+
+	return 0;
+}
+
+static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+	int ret = 0;
+
+
+	/* ofs: offset within the first chip that the first read should start */
+
+	/* 8 secsi bytes per chip */
+	chipnum=from>>3;
+	ofs=from & 7;
+
+
+	*retlen = 0;
+
+	while (len) {
+		unsigned long thislen;
+
+		if (chipnum >= cfi->numchips)
+			break;
+
+		if ((len + ofs -1) >> 3)
+			thislen = (1<<3) - ofs;
+		else
+			thislen = len;
+
+		ret = do_read_secsi_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf);
+		if (ret)
+			break;
+
+		*retlen += thislen;
+		len -= thislen;
+		buf += thislen;
+
+		ofs = 0;
+		chipnum++;
+	}
+	return ret;
+}
+
+
+static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, map_word datum)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long timeo = jiffies + HZ;
+	/*
+	 * We use a 1ms + 1 jiffies generic timeout for writes (most devices
+	 * have a max write time of a few hundreds usec). However, we should
+	 * use the maximum timeout value given by the chip at probe time
+	 * instead.  Unfortunately, struct flchip does have a field for
+	 * maximum timeout, only for typical which can be far too short
+	 * depending of the conditions.	 The ' + 1' is to avoid having a
+	 * timeout of 0 jiffies if HZ is smaller than 1000.
+	 */
+	unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
+	int ret = 0;
+	map_word oldd;
+	int retry_cnt = 0;
+
+	adr += chip->start;
+
+	cfi_spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_WRITING);
+	if (ret) {
+		cfi_spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+	       __func__, adr, datum.x[0] );
+
+	/*
+	 * Check for a NOP for the case when the datum to write is already
+	 * present - it saves time and works around buggy chips that corrupt
+	 * data at other locations when 0xff is written to a location that
+	 * already contains 0xff.
+	 */
+	oldd = map_read(map, adr);
+	if (map_word_equal(map, oldd, datum)) {
+		DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): NOP\n",
+		       __func__);
+		goto op_done;
+	}
+
+	ENABLE_VPP(map);
+ retry:
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	map_write(map, datum, adr);
+	chip->state = FL_WRITING;
+
+	cfi_spin_unlock(chip->mutex);
+	cfi_udelay(chip->word_write_time);
+	cfi_spin_lock(chip->mutex);
+
+	/* See comment above for timeout value. */
+	timeo = jiffies + uWriteTimeout; 
+	for (;;) {
+		if (chip->state != FL_WRITING) {
+			/* Someone's suspended the write. Sleep */
+			DECLARE_WAITQUEUE(wait, current);
+
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			cfi_spin_unlock(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ / 2); /* FIXME */
+			cfi_spin_lock(chip->mutex);
+			continue;
+		}
+
+		if (chip_ready(map, adr))
+			goto op_done;
+
+		if (time_after(jiffies, timeo))
+                        break;
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		cfi_spin_unlock(chip->mutex);
+		cfi_udelay(1);
+		cfi_spin_lock(chip->mutex);
+	}
+
+	printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
+
+	/* reset on all failures. */
+	map_write( map, CMD(0xF0), chip->start );
+	/* FIXME - should have reset delay before continuing */
+	if (++retry_cnt <= MAX_WORD_RETRIES) 
+		goto retry;
+
+	ret = -EIO;
+ op_done:
+	chip->state = FL_READY;
+	put_chip(map, chip, adr);
+	cfi_spin_unlock(chip->mutex);
+
+	return ret;
+}
+
+
+static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
+				  size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int ret = 0;
+	int chipnum;
+	unsigned long ofs, chipstart;
+	DECLARE_WAITQUEUE(wait, current);
+
+	*retlen = 0;
+	if (!len)
+		return 0;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to  - (chipnum << cfi->chipshift);
+	chipstart = cfi->chips[chipnum].start;
+
+	/* If it's not bus-aligned, do the first byte write */
+	if (ofs & (map_bankwidth(map)-1)) {
+		unsigned long bus_ofs = ofs & ~(map_bankwidth(map)-1);
+		int i = ofs - bus_ofs;
+		int n = 0;
+		map_word tmp_buf;
+
+ retry:
+		cfi_spin_lock(cfi->chips[chipnum].mutex);
+
+		if (cfi->chips[chipnum].state != FL_READY) {
+#if 0
+			printk(KERN_DEBUG "Waiting for chip to write, status = %d\n", cfi->chips[chipnum].state);
+#endif
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&cfi->chips[chipnum].wq, &wait);
+
+			cfi_spin_unlock(cfi->chips[chipnum].mutex);
+
+			schedule();
+			remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
+#if 0
+			if(signal_pending(current))
+				return -EINTR;
+#endif
+			goto retry;
+		}
+
+		/* Load 'tmp_buf' with old contents of flash */
+		tmp_buf = map_read(map, bus_ofs+chipstart);
+
+		cfi_spin_unlock(cfi->chips[chipnum].mutex);
+
+		/* Number of bytes to copy from buffer */
+		n = min_t(int, len, map_bankwidth(map)-i);
+		
+		tmp_buf = map_word_load_partial(map, tmp_buf, buf, i, n);
+
+		ret = do_write_oneword(map, &cfi->chips[chipnum], 
+				       bus_ofs, tmp_buf);
+		if (ret) 
+			return ret;
+		
+		ofs += n;
+		buf += n;
+		(*retlen) += n;
+		len -= n;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+	
+	/* We are now aligned, write as much as possible */
+	while(len >= map_bankwidth(map)) {
+		map_word datum;
+
+		datum = map_word_load(map, buf);
+
+		ret = do_write_oneword(map, &cfi->chips[chipnum],
+				       ofs, datum);
+		if (ret)
+			return ret;
+
+		ofs += map_bankwidth(map);
+		buf += map_bankwidth(map);
+		(*retlen) += map_bankwidth(map);
+		len -= map_bankwidth(map);
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+			chipstart = cfi->chips[chipnum].start;
+		}
+	}
+
+	/* Write the trailing bytes if any */
+	if (len & (map_bankwidth(map)-1)) {
+		map_word tmp_buf;
+
+ retry1:
+		cfi_spin_lock(cfi->chips[chipnum].mutex);
+
+		if (cfi->chips[chipnum].state != FL_READY) {
+#if 0
+			printk(KERN_DEBUG "Waiting for chip to write, status = %d\n", cfi->chips[chipnum].state);
+#endif
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&cfi->chips[chipnum].wq, &wait);
+
+			cfi_spin_unlock(cfi->chips[chipnum].mutex);
+
+			schedule();
+			remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
+#if 0
+			if(signal_pending(current))
+				return -EINTR;
+#endif
+			goto retry1;
+		}
+
+		tmp_buf = map_read(map, ofs + chipstart);
+
+		cfi_spin_unlock(cfi->chips[chipnum].mutex);
+
+		tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len);
+	
+		ret = do_write_oneword(map, &cfi->chips[chipnum], 
+				ofs, tmp_buf);
+		if (ret) 
+			return ret;
+		
+		(*retlen) += len;
+	}
+
+	return 0;
+}
+
+
+/*
+ * FIXME: interleaved mode not tested, and probably not supported!
+ */
+static inline int do_write_buffer(struct map_info *map, struct flchip *chip, 
+				  unsigned long adr, const u_char *buf, int len)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long timeo = jiffies + HZ;
+	/* see comments in do_write_oneword() regarding uWriteTimeo. */
+	unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
+	int ret = -EIO;
+	unsigned long cmd_adr;
+	int z, words;
+	map_word datum;
+
+	adr += chip->start;
+	cmd_adr = adr;
+
+	cfi_spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_WRITING);
+	if (ret) {
+		cfi_spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	datum = map_word_load(map, buf);
+
+	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+	       __func__, adr, datum.x[0] );
+
+	ENABLE_VPP(map);
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	//cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+
+	/* Write Buffer Load */
+	map_write(map, CMD(0x25), cmd_adr);
+
+	chip->state = FL_WRITING_TO_BUFFER;
+
+	/* Write length of data to come */
+	words = len / map_bankwidth(map);
+	map_write(map, CMD(words - 1), cmd_adr);
+	/* Write data */
+	z = 0;
+	while(z < words * map_bankwidth(map)) {
+		datum = map_word_load(map, buf);
+		map_write(map, datum, adr + z);
+
+		z += map_bankwidth(map);
+		buf += map_bankwidth(map);
+	}
+	z -= map_bankwidth(map);
+
+	adr += z;
+
+	/* Write Buffer Program Confirm: GO GO GO */
+	map_write(map, CMD(0x29), cmd_adr);
+	chip->state = FL_WRITING;
+
+	cfi_spin_unlock(chip->mutex);
+	cfi_udelay(chip->buffer_write_time);
+	cfi_spin_lock(chip->mutex);
+
+	timeo = jiffies + uWriteTimeout; 
+		
+	for (;;) {
+		if (chip->state != FL_WRITING) {
+			/* Someone's suspended the write. Sleep */
+			DECLARE_WAITQUEUE(wait, current);
+
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			cfi_spin_unlock(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ / 2); /* FIXME */
+			cfi_spin_lock(chip->mutex);
+			continue;
+		}
+
+		if (chip_ready(map, adr))
+			goto op_done;
+		    
+		if( time_after(jiffies, timeo))
+			break;
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		cfi_spin_unlock(chip->mutex);
+		cfi_udelay(1);
+		cfi_spin_lock(chip->mutex);
+	}
+
+	printk(KERN_WARNING "MTD %s(): software timeout\n",
+	       __func__ );
+
+	/* reset on all failures. */
+	map_write( map, CMD(0xF0), chip->start );
+	/* FIXME - should have reset delay before continuing */
+
+	ret = -EIO;
+ op_done:
+	chip->state = FL_READY;
+	put_chip(map, chip, adr);
+	cfi_spin_unlock(chip->mutex);
+
+	return ret;
+}
+
+
+static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+				    size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+	int ret = 0;
+	int chipnum;
+	unsigned long ofs;
+
+	*retlen = 0;
+	if (!len)
+		return 0;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to  - (chipnum << cfi->chipshift);
+
+	/* If it's not bus-aligned, do the first word write */
+	if (ofs & (map_bankwidth(map)-1)) {
+		size_t local_len = (-ofs)&(map_bankwidth(map)-1);
+		if (local_len > len)
+			local_len = len;
+		ret = cfi_amdstd_write_words(mtd, ofs + (chipnum<<cfi->chipshift),
+					     local_len, retlen, buf);
+		if (ret)
+			return ret;
+		ofs += local_len;
+		buf += local_len;
+		len -= local_len;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++;
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+
+	/* Write buffer is worth it only if more than one word to write... */
+	while (len >= map_bankwidth(map) * 2) {
+		/* We must not cross write block boundaries */
+		int size = wbufsize - (ofs & (wbufsize-1));
+
+		if (size > len)
+			size = len;
+		if (size % map_bankwidth(map))
+			size -= size % map_bankwidth(map);
+
+		ret = do_write_buffer(map, &cfi->chips[chipnum], 
+				      ofs, buf, size);
+		if (ret)
+			return ret;
+
+		ofs += size;
+		buf += size;
+		(*retlen) += size;
+		len -= size;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+
+	if (len) {
+		size_t retlen_dregs = 0;
+
+		ret = cfi_amdstd_write_words(mtd, ofs + (chipnum<<cfi->chipshift),
+					     len, &retlen_dregs, buf);
+
+		*retlen += retlen_dregs;
+		return ret;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Handle devices with one erase region, that only implement
+ * the chip erase command.
+ */
+static inline int do_erase_chip(struct map_info *map, struct flchip *chip)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long timeo = jiffies + HZ;
+	unsigned long int adr;
+	DECLARE_WAITQUEUE(wait, current);
+	int ret = 0;
+
+	adr = cfi->addr_unlock1;
+
+	cfi_spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_WRITING);
+	if (ret) {
+		cfi_spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+	       __func__, chip->start );
+
+	ENABLE_VPP(map);
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x10, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+
+	chip->state = FL_ERASING;
+	chip->erase_suspended = 0;
+	chip->in_progress_block_addr = adr;
+
+	cfi_spin_unlock(chip->mutex);
+	msleep(chip->erase_time/2);
+	cfi_spin_lock(chip->mutex);
+
+	timeo = jiffies + (HZ*20);
+
+	for (;;) {
+		if (chip->state != FL_ERASING) {
+			/* Someone's suspended the erase. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			cfi_spin_unlock(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			cfi_spin_lock(chip->mutex);
+			continue;
+		}
+		if (chip->erase_suspended) {
+			/* This erase was suspended and resumed.
+			   Adjust the timeout */
+			timeo = jiffies + (HZ*20); /* FIXME */
+			chip->erase_suspended = 0;
+		}
+
+		if (chip_ready(map, adr))
+			goto op_done;
+
+		if (time_after(jiffies, timeo))
+			break;
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		cfi_spin_unlock(chip->mutex);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+		cfi_spin_lock(chip->mutex);
+	}
+
+	printk(KERN_WARNING "MTD %s(): software timeout\n",
+	       __func__ );
+
+	/* reset on all failures. */
+	map_write( map, CMD(0xF0), chip->start );
+	/* FIXME - should have reset delay before continuing */
+
+	ret = -EIO;
+ op_done:
+	chip->state = FL_READY;
+	put_chip(map, chip, adr);
+	cfi_spin_unlock(chip->mutex);
+
+	return ret;
+}
+
+
+static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr, int len, void *thunk)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long timeo = jiffies + HZ;
+	DECLARE_WAITQUEUE(wait, current);
+	int ret = 0;
+
+	adr += chip->start;
+
+	cfi_spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_ERASING);
+	if (ret) {
+		cfi_spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+	       __func__, adr );
+
+	ENABLE_VPP(map);
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	map_write(map, CMD(0x30), adr);
+
+	chip->state = FL_ERASING;
+	chip->erase_suspended = 0;
+	chip->in_progress_block_addr = adr;
+	
+	cfi_spin_unlock(chip->mutex);
+	msleep(chip->erase_time/2);
+	cfi_spin_lock(chip->mutex);
+
+	timeo = jiffies + (HZ*20);
+
+	for (;;) {
+		if (chip->state != FL_ERASING) {
+			/* Someone's suspended the erase. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			cfi_spin_unlock(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			cfi_spin_lock(chip->mutex);
+			continue;
+		}
+		if (chip->erase_suspended) {
+			/* This erase was suspended and resumed.
+			   Adjust the timeout */
+			timeo = jiffies + (HZ*20); /* FIXME */
+			chip->erase_suspended = 0;
+		}
+
+		if (chip_ready(map, adr))
+			goto op_done;
+
+		if (time_after(jiffies, timeo))
+			break;
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		cfi_spin_unlock(chip->mutex);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+		cfi_spin_lock(chip->mutex);
+	}
+	
+	printk(KERN_WARNING "MTD %s(): software timeout\n",
+	       __func__ );
+	
+	/* reset on all failures. */
+	map_write( map, CMD(0xF0), chip->start );
+	/* FIXME - should have reset delay before continuing */
+
+	ret = -EIO;
+ op_done:
+	chip->state = FL_READY;
+	put_chip(map, chip, adr);
+	cfi_spin_unlock(chip->mutex);
+	return ret;
+}
+
+
+int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+{
+	unsigned long ofs, len;
+	int ret;
+
+	ofs = instr->addr;
+	len = instr->len;
+
+	ret = cfi_varsize_frob(mtd, do_erase_oneblock, ofs, len, NULL);
+	if (ret)
+		return ret;
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	
+	return 0;
+}
+
+
+static int cfi_amdstd_erase_chip(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int ret = 0;
+
+	if (instr->addr != 0)
+		return -EINVAL;
+
+	if (instr->len != mtd->size)
+		return -EINVAL;
+
+	ret = do_erase_chip(map, &cfi->chips[0]);
+	if (ret)
+		return ret;
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	
+	return 0;
+}
+
+
+static void cfi_amdstd_sync (struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+	retry:
+		cfi_spin_lock(chip->mutex);
+
+		switch(chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			chip->oldstate = chip->state;
+			chip->state = FL_SYNCING;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		case FL_SYNCING:
+			cfi_spin_unlock(chip->mutex);
+			break;
+
+		default:
+			/* Not an idle state */
+			add_wait_queue(&chip->wq, &wait);
+			
+			cfi_spin_unlock(chip->mutex);
+
+			schedule();
+
+			remove_wait_queue(&chip->wq, &wait);
+			
+			goto retry;
+		}
+	}
+
+	/* Unlock the chips again */
+
+	for (i--; i >=0; i--) {
+		chip = &cfi->chips[i];
+
+		cfi_spin_lock(chip->mutex);
+		
+		if (chip->state == FL_SYNCING) {
+			chip->state = chip->oldstate;
+			wake_up(&chip->wq);
+		}
+		cfi_spin_unlock(chip->mutex);
+	}
+}
+
+
+static int cfi_amdstd_suspend(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+		cfi_spin_lock(chip->mutex);
+
+		switch(chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			chip->oldstate = chip->state;
+			chip->state = FL_PM_SUSPENDED;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		case FL_PM_SUSPENDED:
+			break;
+
+		default:
+			ret = -EAGAIN;
+			break;
+		}
+		cfi_spin_unlock(chip->mutex);
+	}
+
+	/* Unlock the chips again */
+
+	if (ret) {
+		for (i--; i >=0; i--) {
+			chip = &cfi->chips[i];
+
+			cfi_spin_lock(chip->mutex);
+		
+			if (chip->state == FL_PM_SUSPENDED) {
+				chip->state = chip->oldstate;
+				wake_up(&chip->wq);
+			}
+			cfi_spin_unlock(chip->mutex);
+		}
+	}
+	
+	return ret;
+}
+
+
+static void cfi_amdstd_resume(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+
+	for (i=0; i<cfi->numchips; i++) {
+	
+		chip = &cfi->chips[i];
+
+		cfi_spin_lock(chip->mutex);
+		
+		if (chip->state == FL_PM_SUSPENDED) {
+			chip->state = FL_READY;
+			map_write(map, CMD(0xF0), chip->start);
+			wake_up(&chip->wq);
+		}
+		else
+			printk(KERN_ERR "Argh. Chip not in PM_SUSPENDED state upon resume()\n");
+
+		cfi_spin_unlock(chip->mutex);
+	}
+}
+
+static void cfi_amdstd_destroy(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	kfree(cfi->cmdset_priv);
+	kfree(cfi->cfiq);
+	kfree(cfi);
+	kfree(mtd->eraseregions);
+}
+
+static char im_name[]="cfi_cmdset_0002";
+
+
+static int __init cfi_amdstd_init(void)
+{
+	inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0002);
+	return 0;
+}
+
+
+static void __exit cfi_amdstd_exit(void)
+{
+	inter_module_unregister(im_name);
+}
+
+
+module_init(cfi_amdstd_init);
+module_exit(cfi_amdstd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Crossnet Co. <info@crossnet.co.jp> et al.");
+MODULE_DESCRIPTION("MTD chip driver for AMD/Fujitsu flash chips");
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
new file mode 100644
index 000000000000..8c24e18db3b4
--- /dev/null
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -0,0 +1,1418 @@
+/*
+ * Common Flash Interface support:
+ *   ST Advanced Architecture Command Set (ID 0x0020)
+ *
+ * (C) 2000 Red Hat. GPL'd
+ *
+ * $Id: cfi_cmdset_0020.c,v 1.17 2004/11/20 12:49:04 dwmw2 Exp $
+ * 
+ * 10/10/2000	Nicolas Pitre <nico@cam.org>
+ * 	- completely revamped method functions so they are aware and
+ * 	  independent of the flash geometry (buswidth, interleave, etc.)
+ * 	- scalability vs code size is completely set at compile-time
+ * 	  (see include/linux/mtd/cfi.h for selection)
+ *	- optimized write buffer method
+ * 06/21/2002	Joern Engel <joern@wh.fh-wedel.de> and others
+ *	- modified Intel Command Set 0x0001 to support ST Advanced Architecture
+ *	  (command set 0x0020)
+ *	- added a writev function
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/compatmac.h>
+
+
+static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_staa_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen);
+static int cfi_staa_erase_varsize(struct mtd_info *, struct erase_info *);
+static void cfi_staa_sync (struct mtd_info *);
+static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, size_t len);
+static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
+static int cfi_staa_suspend (struct mtd_info *);
+static void cfi_staa_resume (struct mtd_info *);
+
+static void cfi_staa_destroy(struct mtd_info *);
+
+struct mtd_info *cfi_cmdset_0020(struct map_info *, int);
+
+static struct mtd_info *cfi_staa_setup (struct map_info *);
+
+static struct mtd_chip_driver cfi_staa_chipdrv = {
+	.probe		= NULL, /* Not usable directly */
+	.destroy	= cfi_staa_destroy,
+	.name		= "cfi_cmdset_0020",
+	.module		= THIS_MODULE
+};
+
+/* #define DEBUG_LOCK_BITS */
+//#define DEBUG_CFI_FEATURES
+
+#ifdef DEBUG_CFI_FEATURES
+static void cfi_tell_features(struct cfi_pri_intelext *extp)
+{
+        int i;
+        printk("  Feature/Command Support: %4.4X\n", extp->FeatureSupport);
+	printk("     - Chip Erase:         %s\n", extp->FeatureSupport&1?"supported":"unsupported");
+	printk("     - Suspend Erase:      %s\n", extp->FeatureSupport&2?"supported":"unsupported");
+	printk("     - Suspend Program:    %s\n", extp->FeatureSupport&4?"supported":"unsupported");
+	printk("     - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported");
+	printk("     - Queued Erase:       %s\n", extp->FeatureSupport&16?"supported":"unsupported");
+	printk("     - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported");
+	printk("     - Protection Bits:    %s\n", extp->FeatureSupport&64?"supported":"unsupported");
+	printk("     - Page-mode read:     %s\n", extp->FeatureSupport&128?"supported":"unsupported");
+	printk("     - Synchronous read:   %s\n", extp->FeatureSupport&256?"supported":"unsupported");
+	for (i=9; i<32; i++) {
+		if (extp->FeatureSupport & (1<<i)) 
+			printk("     - Unknown Bit %X:      supported\n", i);
+	}
+	
+	printk("  Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport);
+	printk("     - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported");
+	for (i=1; i<8; i++) {
+		if (extp->SuspendCmdSupport & (1<<i))
+			printk("     - Unknown Bit %X:               supported\n", i);
+	}
+	
+	printk("  Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask);
+	printk("     - Lock Bit Active:      %s\n", extp->BlkStatusRegMask&1?"yes":"no");
+	printk("     - Valid Bit Active:     %s\n", extp->BlkStatusRegMask&2?"yes":"no");
+	for (i=2; i<16; i++) {
+		if (extp->BlkStatusRegMask & (1<<i))
+			printk("     - Unknown Bit %X Active: yes\n",i);
+	}
+	
+	printk("  Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n", 
+	       extp->VccOptimal >> 8, extp->VccOptimal & 0xf);
+	if (extp->VppOptimal)
+		printk("  Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", 
+		       extp->VppOptimal >> 8, extp->VppOptimal & 0xf);
+}
+#endif
+
+/* This routine is made available to other mtd code via
+ * inter_module_register.  It must only be accessed through
+ * inter_module_get which will bump the use count of this module.  The
+ * addresses passed back in cfi are valid as long as the use count of
+ * this module is non-zero, i.e. between inter_module_get and
+ * inter_module_put.  Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
+ */
+struct mtd_info *cfi_cmdset_0020(struct map_info *map, int primary)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+
+	if (cfi->cfi_mode) {
+		/* 
+		 * It's a real CFI chip, not one for which the probe
+		 * routine faked a CFI structure. So we read the feature
+		 * table from it.
+		 */
+		__u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR;
+		struct cfi_pri_intelext *extp;
+
+		extp = (struct cfi_pri_intelext*)cfi_read_pri(map, adr, sizeof(*extp), "ST Microelectronics");
+		if (!extp)
+			return NULL;
+
+		/* Do some byteswapping if necessary */
+		extp->FeatureSupport = cfi32_to_cpu(extp->FeatureSupport);
+		extp->BlkStatusRegMask = cfi32_to_cpu(extp->BlkStatusRegMask);
+		
+#ifdef DEBUG_CFI_FEATURES
+		/* Tell the user about it in lots of lovely detail */
+		cfi_tell_features(extp);
+#endif	
+
+		/* Install our own private info structure */
+		cfi->cmdset_priv = extp;
+	}	
+
+	for (i=0; i< cfi->numchips; i++) {
+		cfi->chips[i].word_write_time = 128;
+		cfi->chips[i].buffer_write_time = 128;
+		cfi->chips[i].erase_time = 1024;
+	}		
+
+	return cfi_staa_setup(map);
+}
+
+static struct mtd_info *cfi_staa_setup(struct map_info *map)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct mtd_info *mtd;
+	unsigned long offset = 0;
+	int i,j;
+	unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave;
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
+
+	if (!mtd) {
+		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+		kfree(cfi->cmdset_priv);
+		return NULL;
+	}
+
+	memset(mtd, 0, sizeof(*mtd));
+	mtd->priv = map;
+	mtd->type = MTD_NORFLASH;
+	mtd->size = devsize * cfi->numchips;
+
+	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
+	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) 
+			* mtd->numeraseregions, GFP_KERNEL);
+	if (!mtd->eraseregions) { 
+		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
+		kfree(cfi->cmdset_priv);
+		kfree(mtd);
+		return NULL;
+	}
+	
+	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
+		unsigned long ernum, ersize;
+		ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave;
+		ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1;
+
+		if (mtd->erasesize < ersize) {
+			mtd->erasesize = ersize;
+		}
+		for (j=0; j<cfi->numchips; j++) {
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize;
+			mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum;
+		}
+		offset += (ersize * ernum);
+		}
+
+		if (offset != devsize) {
+			/* Argh */
+			printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
+			kfree(mtd->eraseregions);
+			kfree(cfi->cmdset_priv);
+			kfree(mtd);
+			return NULL;
+		}
+
+		for (i=0; i<mtd->numeraseregions;i++){
+			printk(KERN_DEBUG "%d: offset=0x%x,size=0x%x,blocks=%d\n",
+			       i,mtd->eraseregions[i].offset,
+			       mtd->eraseregions[i].erasesize,
+			       mtd->eraseregions[i].numblocks);
+		}
+
+	/* Also select the correct geometry setup too */ 
+	mtd->erase = cfi_staa_erase_varsize;
+	mtd->read = cfi_staa_read;
+        mtd->write = cfi_staa_write_buffers;
+	mtd->writev = cfi_staa_writev;
+	mtd->sync = cfi_staa_sync;
+	mtd->lock = cfi_staa_lock;
+	mtd->unlock = cfi_staa_unlock;
+	mtd->suspend = cfi_staa_suspend;
+	mtd->resume = cfi_staa_resume;
+	mtd->flags = MTD_CAP_NORFLASH;
+	mtd->flags |= MTD_ECC; /* FIXME: Not all STMicro flashes have this */
+	mtd->eccsize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
+	map->fldrv = &cfi_staa_chipdrv;
+	__module_get(THIS_MODULE);
+	mtd->name = map->name;
+	return mtd;
+}
+
+
+static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
+{
+	map_word status, status_OK;
+	unsigned long timeo;
+	DECLARE_WAITQUEUE(wait, current);
+	int suspended = 0;
+	unsigned long cmd_addr;
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	adr += chip->start;
+
+	/* Ensure cmd read/writes are aligned. */ 
+	cmd_addr = adr & ~(map_bankwidth(map)-1); 
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+ retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us.
+	 * If it's in FL_ERASING state, suspend it and make it talk now.
+	 */
+	switch (chip->state) {
+	case FL_ERASING:
+		if (!(((struct cfi_pri_intelext *)cfi->cmdset_priv)->FeatureSupport & 2))
+			goto sleep; /* We don't support erase suspend */
+		
+		map_write (map, CMD(0xb0), cmd_addr);
+		/* If the flash has finished erasing, then 'erase suspend'
+		 * appears to make some (28F320) flash devices switch to
+		 * 'read' mode.  Make sure that we switch to 'read status'
+		 * mode so we get the right data. --rmk
+		 */
+		map_write(map, CMD(0x70), cmd_addr);
+		chip->oldstate = FL_ERASING;
+		chip->state = FL_ERASE_SUSPENDING;
+		//		printk("Erase suspending at 0x%lx\n", cmd_addr);
+		for (;;) {
+			status = map_read(map, cmd_addr);
+			if (map_word_andequal(map, status, status_OK, status_OK))
+				break;
+			
+			if (time_after(jiffies, timeo)) {
+				/* Urgh */
+				map_write(map, CMD(0xd0), cmd_addr);
+				/* make sure we're in 'read status' mode */
+				map_write(map, CMD(0x70), cmd_addr);
+				chip->state = FL_ERASING;
+				spin_unlock_bh(chip->mutex);
+				printk(KERN_ERR "Chip not ready after erase "
+				       "suspended: status = 0x%lx\n", status.x[0]);
+				return -EIO;
+			}
+			
+			spin_unlock_bh(chip->mutex);
+			cfi_udelay(1);
+			spin_lock_bh(chip->mutex);
+		}
+		
+		suspended = 1;
+		map_write(map, CMD(0xff), cmd_addr);
+		chip->state = FL_READY;
+		break;
+	
+#if 0
+	case FL_WRITING:
+		/* Not quite yet */
+#endif
+
+	case FL_READY:
+		break;
+
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+		map_write(map, CMD(0x70), cmd_addr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, cmd_addr);
+		if (map_word_andequal(map, status, status_OK, status_OK)) {
+			map_write(map, CMD(0xff), cmd_addr);
+			chip->state = FL_READY;
+			break;
+		}
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %lx\n", status.x[0]);
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+	sleep:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	map_copy_from(map, buf, adr, len);
+
+	if (suspended) {
+		chip->state = chip->oldstate;
+		/* What if one interleaved chip has finished and the 
+		   other hasn't? The old code would leave the finished
+		   one in READY mode. That's bad, and caused -EROFS 
+		   errors to be returned from do_erase_oneblock because
+		   that's the only bit it checked for at the time.
+		   As the state machine appears to explicitly allow 
+		   sending the 0x70 (Read Status) command to an erasing
+		   chip and expecting it to be ignored, that's what we 
+		   do. */
+		map_write(map, CMD(0xd0), cmd_addr);
+		map_write(map, CMD(0x70), cmd_addr);		
+	}
+
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return 0;
+}
+
+static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs;
+	int chipnum;
+	int ret = 0;
+
+	/* ofs: offset within the first chip that the first read should start */
+	chipnum = (from >> cfi->chipshift);
+	ofs = from - (chipnum <<  cfi->chipshift);
+
+	*retlen = 0;
+
+	while (len) {
+		unsigned long thislen;
+
+		if (chipnum >= cfi->numchips)
+			break;
+
+		if ((len + ofs -1) >> cfi->chipshift)
+			thislen = (1<<cfi->chipshift) - ofs;
+		else
+			thislen = len;
+
+		ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf);
+		if (ret)
+			break;
+
+		*retlen += thislen;
+		len -= thislen;
+		buf += thislen;
+		
+		ofs = 0;
+		chipnum++;
+	}
+	return ret;
+}
+
+static inline int do_write_buffer(struct map_info *map, struct flchip *chip, 
+				  unsigned long adr, const u_char *buf, int len)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long cmd_adr, timeo;
+	DECLARE_WAITQUEUE(wait, current);
+	int wbufsize, z;
+        
+        /* M58LW064A requires bus alignment for buffer wriets -- saw */
+        if (adr & (map_bankwidth(map)-1))
+            return -EINVAL;
+
+        wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+        adr += chip->start;
+	cmd_adr = adr & ~(wbufsize-1);
+	
+	/* Let's determine this according to the interleave only once */
+        status_OK = CMD(0x80);
+        
+	timeo = jiffies + HZ;
+ retry:
+
+#ifdef DEBUG_CFI_FEATURES
+       printk("%s: chip->state[%d]\n", __FUNCTION__, chip->state);
+#endif
+	spin_lock_bh(chip->mutex);
+ 
+	/* Check that the chip's ready to talk to us.
+	 * Later, we can actually think about interrupting it
+	 * if it's in FL_ERASING state.
+	 * Not just yet, though.
+	 */
+	switch (chip->state) {
+	case FL_READY:
+		break;
+		
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+		map_write(map, CMD(0x70), cmd_adr);
+                chip->state = FL_STATUS;
+#ifdef DEBUG_CFI_FEATURES
+        printk("%s: 1 status[%x]\n", __FUNCTION__, map_read(map, cmd_adr));
+#endif
+
+	case FL_STATUS:
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+                        printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx\n",
+                               status.x[0], map_read(map, cmd_adr).x[0]);
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	map_write(map, CMD(0xe8), cmd_adr);
+	chip->state = FL_WRITING_TO_BUFFER;
+
+	z = 0;
+	for (;;) {
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+
+		if (++z > 100) {
+			/* Argh. Not ready for write to buffer */
+			DISABLE_VPP(map);
+                        map_write(map, CMD(0x70), cmd_adr);
+			chip->state = FL_STATUS;
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %lx\n", status.x[0]);
+			return -EIO;
+		}
+	}
+
+	/* Write length of data to come */
+	map_write(map, CMD(len/map_bankwidth(map)-1), cmd_adr );
+        
+	/* Write data */
+	for (z = 0; z < len;
+	     z += map_bankwidth(map), buf += map_bankwidth(map)) {
+		map_word d;
+		d = map_word_load(map, buf);
+		map_write(map, d, adr+z);
+	}
+	/* GO GO GO */
+	map_write(map, CMD(0xd0), cmd_adr);
+	chip->state = FL_WRITING;
+
+	spin_unlock_bh(chip->mutex);
+	cfi_udelay(chip->buffer_write_time);
+	spin_lock_bh(chip->mutex);
+
+	timeo = jiffies + (HZ/2);
+	z = 0;
+	for (;;) {
+		if (chip->state != FL_WRITING) {
+			/* Someone's suspended the write. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			spin_unlock_bh(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ / 2); /* FIXME */
+			spin_lock_bh(chip->mutex);
+			continue;
+		}
+
+		status = map_read(map, cmd_adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+                        /* clear status */
+                        map_write(map, CMD(0x50), cmd_adr);
+                        /* put back into read status register mode */
+                        map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n");
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		z++;
+		spin_lock_bh(chip->mutex);
+	}
+	if (!z) {
+		chip->buffer_write_time--;
+		if (!chip->buffer_write_time)
+			chip->buffer_write_time++;
+	}
+	if (z > 1) 
+		chip->buffer_write_time++;
+        
+	/* Done and happy. */
+	DISABLE_VPP(map);
+	chip->state = FL_STATUS;
+
+        /* check for errors: 'lock bit', 'VPP', 'dead cell'/'unerased cell' or 'incorrect cmd' -- saw */
+        if (map_word_bitsset(map, status, CMD(0x3a))) {
+#ifdef DEBUG_CFI_FEATURES
+		printk("%s: 2 status[%lx]\n", __FUNCTION__, status.x[0]);
+#endif
+		/* clear status */
+		map_write(map, CMD(0x50), cmd_adr);
+		/* put back into read status register mode */
+		map_write(map, CMD(0x70), adr);
+		wake_up(&chip->wq);
+		spin_unlock_bh(chip->mutex);
+		return map_word_bitsset(map, status, CMD(0x02)) ? -EROFS : -EIO;
+	}
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+
+        return 0;
+}
+
+static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to, 
+				       size_t len, size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+	int ret = 0;
+	int chipnum;
+	unsigned long ofs;
+
+	*retlen = 0;
+	if (!len)
+		return 0;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to  - (chipnum << cfi->chipshift);
+
+#ifdef DEBUG_CFI_FEATURES
+        printk("%s: map_bankwidth(map)[%x]\n", __FUNCTION__, map_bankwidth(map));
+        printk("%s: chipnum[%x] wbufsize[%x]\n", __FUNCTION__, chipnum, wbufsize);
+        printk("%s: ofs[%x] len[%x]\n", __FUNCTION__, ofs, len);
+#endif
+        
+        /* Write buffer is worth it only if more than one word to write... */
+        while (len > 0) {
+		/* We must not cross write block boundaries */
+		int size = wbufsize - (ofs & (wbufsize-1));
+
+                if (size > len)
+                    size = len;
+
+                ret = do_write_buffer(map, &cfi->chips[chipnum], 
+				      ofs, buf, size);
+		if (ret)
+			return ret;
+
+		ofs += size;
+		buf += size;
+		(*retlen) += size;
+		len -= size;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum ++; 
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+        
+	return 0;
+}
+
+/*
+ * Writev for ECC-Flashes is a little more complicated. We need to maintain
+ * a small buffer for this.
+ * XXX: If the buffer size is not a multiple of 2, this will break
+ */
+#define ECCBUF_SIZE (mtd->eccsize)
+#define ECCBUF_DIV(x) ((x) & ~(ECCBUF_SIZE - 1))
+#define ECCBUF_MOD(x) ((x) &  (ECCBUF_SIZE - 1))
+static int
+cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen)
+{
+	unsigned long i;
+	size_t	 totlen = 0, thislen;
+	int	 ret = 0;
+	size_t	 buflen = 0;
+	static char *buffer;
+
+	if (!ECCBUF_SIZE) {
+		/* We should fall back to a general writev implementation.
+		 * Until that is written, just break.
+		 */
+		return -EIO;
+	}
+	buffer = kmalloc(ECCBUF_SIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	for (i=0; i<count; i++) {
+		size_t elem_len = vecs[i].iov_len;
+		void *elem_base = vecs[i].iov_base;
+		if (!elem_len) /* FIXME: Might be unnecessary. Check that */
+			continue;
+		if (buflen) { /* cut off head */
+			if (buflen + elem_len < ECCBUF_SIZE) { /* just accumulate */
+				memcpy(buffer+buflen, elem_base, elem_len);
+				buflen += elem_len;
+				continue;
+			}
+			memcpy(buffer+buflen, elem_base, ECCBUF_SIZE-buflen);
+			ret = mtd->write(mtd, to, ECCBUF_SIZE, &thislen, buffer);
+			totlen += thislen;
+			if (ret || thislen != ECCBUF_SIZE)
+				goto write_error;
+			elem_len -= thislen-buflen;
+			elem_base += thislen-buflen;
+			to += ECCBUF_SIZE;
+		}
+		if (ECCBUF_DIV(elem_len)) { /* write clean aligned data */
+			ret = mtd->write(mtd, to, ECCBUF_DIV(elem_len), &thislen, elem_base);
+			totlen += thislen;
+			if (ret || thislen != ECCBUF_DIV(elem_len))
+				goto write_error;
+			to += thislen;
+		}
+		buflen = ECCBUF_MOD(elem_len); /* cut off tail */
+		if (buflen) {
+			memset(buffer, 0xff, ECCBUF_SIZE);
+			memcpy(buffer, elem_base + thislen, buflen);
+		}
+	}
+	if (buflen) { /* flush last page, even if not full */
+		/* This is sometimes intended behaviour, really */
+		ret = mtd->write(mtd, to, buflen, &thislen, buffer);
+		totlen += thislen;
+		if (ret || thislen != ECCBUF_SIZE)
+			goto write_error;
+	}
+write_error:
+	if (retlen)
+		*retlen = totlen;
+	return ret;
+}
+
+
+static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo;
+	int retries = 3;
+	DECLARE_WAITQUEUE(wait, current);
+	int ret = 0;
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us. */
+	switch (chip->state) {
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+	case FL_READY:
+		map_write(map, CMD(0x70), adr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in erase\n");
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	/* Clear the status register first */
+	map_write(map, CMD(0x50), adr);
+
+	/* Now erase */
+	map_write(map, CMD(0x20), adr);
+	map_write(map, CMD(0xD0), adr);
+	chip->state = FL_ERASING;
+	
+	spin_unlock_bh(chip->mutex);
+	msleep(1000);
+	spin_lock_bh(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*20);
+	for (;;) {
+		if (chip->state != FL_ERASING) {
+			/* Someone's suspended the erase. Sleep */
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			spin_unlock_bh(chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			timeo = jiffies + (HZ*20); /* FIXME */
+			spin_lock_bh(chip->mutex);
+			continue;
+		}
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+	}
+	
+	DISABLE_VPP(map);
+	ret = 0;
+
+	/* We've broken this before. It doesn't hurt to be safe */
+	map_write(map, CMD(0x70), adr);
+	chip->state = FL_STATUS;
+	status = map_read(map, adr);
+
+	/* check for lock bit */
+	if (map_word_bitsset(map, status, CMD(0x3a))) {
+		unsigned char chipstatus = status.x[0];
+		if (!map_word_equal(map, status, CMD(chipstatus))) {
+			int i, w;
+			for (w=0; w<map_words(map); w++) {
+				for (i = 0; i<cfi_interleave(cfi); i++) {
+					chipstatus |= status.x[w] >> (cfi->device_type * 8);
+				}
+			}
+			printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n",
+			       status.x[0], chipstatus);
+		}
+		/* Reset the error bits */
+		map_write(map, CMD(0x50), adr);
+		map_write(map, CMD(0x70), adr);
+		
+		if ((chipstatus & 0x30) == 0x30) {
+			printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);
+			ret = -EIO;
+		} else if (chipstatus & 0x02) {
+			/* Protection bit set */
+			ret = -EROFS;
+		} else if (chipstatus & 0x8) {
+			/* Voltage */
+			printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus);
+			ret = -EIO;
+		} else if (chipstatus & 0x20) {
+			if (retries--) {
+				printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus);
+				timeo = jiffies + HZ;
+				chip->state = FL_STATUS;
+				spin_unlock_bh(chip->mutex);
+				goto retry;
+			}
+			printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus);
+			ret = -EIO;
+		}
+	}
+
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return ret;
+}
+
+int cfi_staa_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+{	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long adr, len;
+	int chipnum, ret = 0;
+	int i, first;
+	struct mtd_erase_region_info *regions = mtd->eraseregions;
+
+	if (instr->addr > mtd->size)
+		return -EINVAL;
+
+	if ((instr->len + instr->addr) > mtd->size)
+		return -EINVAL;
+
+	/* Check that both start and end of the requested erase are
+	 * aligned with the erasesize at the appropriate addresses.
+	 */
+
+	i = 0;
+
+	/* Skip all erase regions which are ended before the start of 
+	   the requested erase. Actually, to save on the calculations,
+	   we skip to the first erase region which starts after the
+	   start of the requested erase, and then go back one.
+	*/
+	
+	while (i < mtd->numeraseregions && instr->addr >= regions[i].offset)
+	       i++;
+	i--;
+
+	/* OK, now i is pointing at the erase region in which this 
+	   erase request starts. Check the start of the requested
+	   erase range is aligned with the erase size which is in
+	   effect here.
+	*/
+
+	if (instr->addr & (regions[i].erasesize-1))
+		return -EINVAL;
+
+	/* Remember the erase region we start on */
+	first = i;
+
+	/* Next, check that the end of the requested erase is aligned
+	 * with the erase region at that address.
+	 */
+
+	while (i<mtd->numeraseregions && (instr->addr + instr->len) >= regions[i].offset)
+		i++;
+
+	/* As before, drop back one to point at the region in which
+	   the address actually falls
+	*/
+	i--;
+	
+	if ((instr->addr + instr->len) & (regions[i].erasesize-1))
+		return -EINVAL;
+
+	chipnum = instr->addr >> cfi->chipshift;
+	adr = instr->addr - (chipnum << cfi->chipshift);
+	len = instr->len;
+
+	i=first;
+
+	while(len) {
+		ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr);
+		
+		if (ret)
+			return ret;
+
+		adr += regions[i].erasesize;
+		len -= regions[i].erasesize;
+
+		if (adr % (1<< cfi->chipshift) == ((regions[i].offset + (regions[i].erasesize * regions[i].numblocks)) %( 1<< cfi->chipshift)))
+			i++;
+
+		if (adr >> cfi->chipshift) {
+			adr = 0;
+			chipnum++;
+			
+			if (chipnum >= cfi->numchips)
+			break;
+		}
+	}
+		
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	
+	return 0;
+}
+
+static void cfi_staa_sync (struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+	retry:
+		spin_lock_bh(chip->mutex);
+
+		switch(chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			chip->oldstate = chip->state;
+			chip->state = FL_SYNCING;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		case FL_SYNCING:
+			spin_unlock_bh(chip->mutex);
+			break;
+
+		default:
+			/* Not an idle state */
+			add_wait_queue(&chip->wq, &wait);
+			
+			spin_unlock_bh(chip->mutex);
+			schedule();
+		        remove_wait_queue(&chip->wq, &wait);
+			
+			goto retry;
+		}
+	}
+
+	/* Unlock the chips again */
+
+	for (i--; i >=0; i--) {
+		chip = &cfi->chips[i];
+
+		spin_lock_bh(chip->mutex);
+		
+		if (chip->state == FL_SYNCING) {
+			chip->state = chip->oldstate;
+			wake_up(&chip->wq);
+		}
+		spin_unlock_bh(chip->mutex);
+	}
+}
+
+static inline int do_lock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo = jiffies + HZ;
+	DECLARE_WAITQUEUE(wait, current);
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us. */
+	switch (chip->state) {
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+	case FL_READY:
+		map_write(map, CMD(0x70), adr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK)) 
+			break;
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in lock\n");
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	map_write(map, CMD(0x60), adr);
+	map_write(map, CMD(0x01), adr);
+	chip->state = FL_LOCKING;
+	
+	spin_unlock_bh(chip->mutex);
+	msleep(1000);
+	spin_lock_bh(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*2);
+	for (;;) {
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+	}
+	
+	/* Done and happy. */
+	chip->state = FL_STATUS;
+	DISABLE_VPP(map);
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return 0;
+}
+static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long adr;
+	int chipnum, ret = 0;
+#ifdef DEBUG_LOCK_BITS
+	int ofs_factor = cfi->interleave * cfi->device_type;
+#endif
+
+	if (ofs & (mtd->erasesize - 1))
+		return -EINVAL;
+
+	if (len & (mtd->erasesize -1))
+		return -EINVAL;
+
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+
+	chipnum = ofs >> cfi->chipshift;
+	adr = ofs - (chipnum << cfi->chipshift);
+
+	while(len) {
+
+#ifdef DEBUG_LOCK_BITS
+		cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+		printk("before lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
+		cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+#endif
+
+		ret = do_lock_oneblock(map, &cfi->chips[chipnum], adr);
+
+#ifdef DEBUG_LOCK_BITS
+		cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+		printk("after lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
+		cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+#endif	
+		
+		if (ret)
+			return ret;
+
+		adr += mtd->erasesize;
+		len -= mtd->erasesize;
+
+		if (adr >> cfi->chipshift) {
+			adr = 0;
+			chipnum++;
+			
+			if (chipnum >= cfi->numchips)
+			break;
+		}
+	}
+	return 0;
+}
+static inline int do_unlock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	map_word status, status_OK;
+	unsigned long timeo = jiffies + HZ;
+	DECLARE_WAITQUEUE(wait, current);
+
+	adr += chip->start;
+
+	/* Let's determine this according to the interleave only once */
+	status_OK = CMD(0x80);
+
+	timeo = jiffies + HZ;
+retry:
+	spin_lock_bh(chip->mutex);
+
+	/* Check that the chip's ready to talk to us. */
+	switch (chip->state) {
+	case FL_CFI_QUERY:
+	case FL_JEDEC_QUERY:
+	case FL_READY:
+		map_write(map, CMD(0x70), adr);
+		chip->state = FL_STATUS;
+
+	case FL_STATUS:
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* Urgh. Chip not yet ready to talk to us. */
+		if (time_after(jiffies, timeo)) {
+			spin_unlock_bh(chip->mutex);
+			printk(KERN_ERR "waiting for chip to be ready timed out in unlock\n");
+			return -EIO;
+		}
+
+		/* Latency issues. Drop the lock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		goto retry;
+
+	default:
+		/* Stick ourselves on a wait queue to be woken when
+		   someone changes the status */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+		spin_unlock_bh(chip->mutex);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+		timeo = jiffies + HZ;
+		goto retry;
+	}
+
+	ENABLE_VPP(map);
+	map_write(map, CMD(0x60), adr);
+	map_write(map, CMD(0xD0), adr);
+	chip->state = FL_UNLOCKING;
+	
+	spin_unlock_bh(chip->mutex);
+	msleep(1000);
+	spin_lock_bh(chip->mutex);
+
+	/* FIXME. Use a timer to check this, and return immediately. */
+	/* Once the state machine's known to be working I'll do that */
+
+	timeo = jiffies + (HZ*2);
+	for (;;) {
+
+		status = map_read(map, adr);
+		if (map_word_andequal(map, status, status_OK, status_OK))
+			break;
+		
+		/* OK Still waiting */
+		if (time_after(jiffies, timeo)) {
+			map_write(map, CMD(0x70), adr);
+			chip->state = FL_STATUS;
+			printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
+			DISABLE_VPP(map);
+			spin_unlock_bh(chip->mutex);
+			return -EIO;
+		}
+		
+		/* Latency issues. Drop the unlock, wait a while and retry */
+		spin_unlock_bh(chip->mutex);
+		cfi_udelay(1);
+		spin_lock_bh(chip->mutex);
+	}
+	
+	/* Done and happy. */
+	chip->state = FL_STATUS;
+	DISABLE_VPP(map);
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+	return 0;
+}
+static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long adr;
+	int chipnum, ret = 0;
+#ifdef DEBUG_LOCK_BITS
+	int ofs_factor = cfi->interleave * cfi->device_type;
+#endif
+
+	chipnum = ofs >> cfi->chipshift;
+	adr = ofs - (chipnum << cfi->chipshift);
+
+#ifdef DEBUG_LOCK_BITS
+	{
+		unsigned long temp_adr = adr;
+		unsigned long temp_len = len;
+                 
+		cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+                while (temp_len) {
+			printk("before unlock %x: block status register is %x\n",temp_adr,cfi_read_query(map, temp_adr+(2*ofs_factor)));
+			temp_adr += mtd->erasesize;
+			temp_len -= mtd->erasesize;
+		}
+		cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+	}
+#endif
+
+	ret = do_unlock_oneblock(map, &cfi->chips[chipnum], adr);
+
+#ifdef DEBUG_LOCK_BITS
+	cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
+	printk("after unlock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
+	cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
+#endif
+	
+	return ret;
+}
+
+static int cfi_staa_suspend(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+	int ret = 0;
+
+	for (i=0; !ret && i<cfi->numchips; i++) {
+		chip = &cfi->chips[i];
+
+		spin_lock_bh(chip->mutex);
+
+		switch(chip->state) {
+		case FL_READY:
+		case FL_STATUS:
+		case FL_CFI_QUERY:
+		case FL_JEDEC_QUERY:
+			chip->oldstate = chip->state;
+			chip->state = FL_PM_SUSPENDED;
+			/* No need to wake_up() on this state change - 
+			 * as the whole point is that nobody can do anything
+			 * with the chip now anyway.
+			 */
+		case FL_PM_SUSPENDED:
+			break;
+
+		default:
+			ret = -EAGAIN;
+			break;
+		}
+		spin_unlock_bh(chip->mutex);
+	}
+
+	/* Unlock the chips again */
+
+	if (ret) {
+		for (i--; i >=0; i--) {
+			chip = &cfi->chips[i];
+			
+			spin_lock_bh(chip->mutex);
+			
+			if (chip->state == FL_PM_SUSPENDED) {
+				/* No need to force it into a known state here,
+				   because we're returning failure, and it didn't
+				   get power cycled */
+				chip->state = chip->oldstate;
+				wake_up(&chip->wq);
+			}
+			spin_unlock_bh(chip->mutex);
+		}
+	} 
+	
+	return ret;
+}
+
+static void cfi_staa_resume(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int i;
+	struct flchip *chip;
+
+	for (i=0; i<cfi->numchips; i++) {
+	
+		chip = &cfi->chips[i];
+
+		spin_lock_bh(chip->mutex);
+		
+		/* Go to known state. Chip may have been power cycled */
+		if (chip->state == FL_PM_SUSPENDED) {
+			map_write(map, CMD(0xFF), 0);
+			chip->state = FL_READY;
+			wake_up(&chip->wq);
+		}
+
+		spin_unlock_bh(chip->mutex);
+	}
+}
+
+static void cfi_staa_destroy(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	kfree(cfi->cmdset_priv);
+	kfree(cfi);
+}
+
+static char im_name[]="cfi_cmdset_0020";
+
+static int __init cfi_staa_init(void)
+{
+	inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0020);
+	return 0;
+}
+
+static void __exit cfi_staa_exit(void)
+{
+	inter_module_unregister(im_name);
+}
+
+module_init(cfi_staa_init);
+module_exit(cfi_staa_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
new file mode 100644
index 000000000000..cf750038ce6a
--- /dev/null
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -0,0 +1,445 @@
+/* 
+   Common Flash Interface probe code.
+   (C) 2000 Red Hat. GPL'd.
+   $Id: cfi_probe.c,v 1.83 2004/11/16 18:19:02 nico Exp $
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/xip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/gen_probe.h>
+
+//#define DEBUG_CFI 
+
+#ifdef DEBUG_CFI
+static void print_cfi_ident(struct cfi_ident *);
+#endif
+
+static int cfi_probe_chip(struct map_info *map, __u32 base,
+			  unsigned long *chip_map, struct cfi_private *cfi);
+static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
+
+struct mtd_info *cfi_probe(struct map_info *map);
+
+#ifdef CONFIG_MTD_XIP
+
+/* only needed for short periods, so this is rather simple */
+#define xip_disable()	local_irq_disable()
+
+#define xip_allowed(base, map) \
+do { \
+	(void) map_read(map, base); \
+	asm volatile (".rep 8; nop; .endr"); \
+	local_irq_enable(); \
+} while (0)
+
+#define xip_enable(base, map, cfi) \
+do { \
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
+	xip_allowed(base, map); \
+} while (0)
+
+#define xip_disable_qry(base, map, cfi) \
+do { \
+	xip_disable(); \
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
+} while (0)
+
+#else
+
+#define xip_disable()			do { } while (0)
+#define xip_allowed(base, map)		do { } while (0)
+#define xip_enable(base, map, cfi)	do { } while (0)
+#define xip_disable_qry(base, map, cfi) do { } while (0)
+
+#endif
+
+/* check for QRY.
+   in: interleave,type,mode
+   ret: table index, <0 for error
+ */
+static int __xipram qry_present(struct map_info *map, __u32 base,
+				struct cfi_private *cfi)
+{
+	int osf = cfi->interleave * cfi->device_type;	// scale factor
+	map_word val[3];
+	map_word qry[3];
+
+	qry[0] = cfi_build_cmd('Q', map, cfi);
+	qry[1] = cfi_build_cmd('R', map, cfi);
+	qry[2] = cfi_build_cmd('Y', map, cfi);
+
+	val[0] = map_read(map, base + osf*0x10);
+	val[1] = map_read(map, base + osf*0x11);
+	val[2] = map_read(map, base + osf*0x12);
+
+	if (!map_word_equal(map, qry[0], val[0]))
+		return 0;
+
+	if (!map_word_equal(map, qry[1], val[1]))
+		return 0;
+
+	if (!map_word_equal(map, qry[2], val[2]))
+		return 0;
+
+	return 1; 	// "QRY" found
+}
+
+static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
+				   unsigned long *chip_map, struct cfi_private *cfi)
+{
+	int i;
+	
+	if ((base + 0) >= map->size) {
+		printk(KERN_NOTICE
+			"Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
+			(unsigned long)base, map->size -1);
+		return 0;
+	}
+	if ((base + 0xff) >= map->size) {
+		printk(KERN_NOTICE
+			"Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",
+			(unsigned long)base + 0x55, map->size -1);
+		return 0;
+	}
+
+	xip_disable();
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
+
+	if (!qry_present(map,base,cfi)) {
+		xip_enable(base, map, cfi);
+		return 0;
+	}
+
+	if (!cfi->numchips) {
+		/* This is the first time we're called. Set up the CFI 
+		   stuff accordingly and return */
+		return cfi_chip_setup(map, cfi);
+	}
+
+	/* Check each previous chip to see if it's an alias */
+ 	for (i=0; i < (base >> cfi->chipshift); i++) {
+ 		unsigned long start;
+ 		if(!test_bit(i, chip_map)) {
+			/* Skip location; no valid chip at this address */
+ 			continue; 
+ 		}
+ 		start = i << cfi->chipshift;
+		/* This chip should be in read mode if it's one
+		   we've already touched. */
+		if (qry_present(map, start, cfi)) {
+			/* Eep. This chip also had the QRY marker. 
+			 * Is it an alias for the new one? */
+			cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
+			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+
+			/* If the QRY marker goes away, it's an alias */
+			if (!qry_present(map, start, cfi)) {
+				xip_allowed(base, map);
+				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
+				       map->name, base, start);
+				return 0;
+			}
+			/* Yes, it's actually got QRY for data. Most 
+			 * unfortunate. Stick the new chip in read mode
+			 * too and if it's the same, assume it's an alias. */
+			/* FIXME: Use other modes to do a proper check */
+			cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+			
+			if (qry_present(map, base, cfi)) {
+				xip_allowed(base, map);
+				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
+				       map->name, base, start);
+				return 0;
+			}
+		}
+	}
+	
+	/* OK, if we got to here, then none of the previous chips appear to
+	   be aliases for the current one. */
+	set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
+	cfi->numchips++;
+	
+	/* Put it back into Read Mode */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	xip_allowed(base, map);
+
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	       map->name, cfi->interleave, cfi->device_type*8, base,
+	       map->bankwidth*8);
+	
+	return 1;
+}
+
+static int __xipram cfi_chip_setup(struct map_info *map, 
+				   struct cfi_private *cfi)
+{
+	int ofs_factor = cfi->interleave*cfi->device_type;
+	__u32 base = 0;
+	int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);
+	int i;
+
+	xip_enable(base, map, cfi);
+#ifdef DEBUG_CFI
+	printk("Number of erase regions: %d\n", num_erase_regions);
+#endif
+	if (!num_erase_regions)
+		return 0;
+
+	cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
+	if (!cfi->cfiq) {
+		printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
+		return 0;
+	}
+	
+	memset(cfi->cfiq,0,sizeof(struct cfi_ident));	
+	
+	cfi->cfi_mode = CFI_MODE_CFI;
+	
+	/* Read the CFI info structure */
+	xip_disable_qry(base, map, cfi);
+	for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
+		((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
+
+	/* Note we put the device back into Read Mode BEFORE going into Auto
+	 * Select Mode, as some devices support nesting of modes, others
+	 * don't. This way should always work.
+	 * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
+	 * so should be treated as nops or illegal (and so put the device
+	 * back into Read Mode, which is a nop in this case).
+	 */
+	cfi_send_gen_cmd(0xf0,     0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
+	cfi->mfr = cfi_read_query(map, base);
+	cfi->id = cfi_read_query(map, base + ofs_factor);    
+
+	/* Put it back into Read Mode */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	/* ... even if it's an Intel chip */
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	xip_allowed(base, map);
+
+	/* Do any necessary byteswapping */
+	cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
+
+	cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);
+	cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);
+	cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);
+	cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);
+	cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);
+
+#ifdef DEBUG_CFI
+	/* Dump the information therein */
+	print_cfi_ident(cfi->cfiq);
+#endif
+
+	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
+		cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);
+		
+#ifdef DEBUG_CFI		
+		printk("  Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
+		       i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff, 
+		       (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
+#endif
+	}
+
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	       map->name, cfi->interleave, cfi->device_type*8, base,
+	       map->bankwidth*8);
+
+	return 1;
+}
+
+#ifdef DEBUG_CFI
+static char *vendorname(__u16 vendor) 
+{
+	switch (vendor) {
+	case P_ID_NONE:
+		return "None";
+		
+	case P_ID_INTEL_EXT:
+		return "Intel/Sharp Extended";
+		
+	case P_ID_AMD_STD:
+		return "AMD/Fujitsu Standard";
+		
+	case P_ID_INTEL_STD:
+		return "Intel/Sharp Standard";
+		
+	case P_ID_AMD_EXT:
+		return "AMD/Fujitsu Extended";
+
+	case P_ID_WINBOND:
+		return "Winbond Standard";
+		
+	case P_ID_ST_ADV:
+		return "ST Advanced";
+
+	case P_ID_MITSUBISHI_STD:
+		return "Mitsubishi Standard";
+		
+	case P_ID_MITSUBISHI_EXT:
+		return "Mitsubishi Extended";
+
+	case P_ID_SST_PAGE:
+		return "SST Page Write";
+
+	case P_ID_INTEL_PERFORMANCE:
+		return "Intel Performance Code";
+		
+	case P_ID_INTEL_DATA:
+		return "Intel Data";
+		
+	case P_ID_RESERVED:
+		return "Not Allowed / Reserved for Future Use";
+		
+	default:
+		return "Unknown";
+	}
+}
+
+
+static void print_cfi_ident(struct cfi_ident *cfip)
+{
+#if 0
+	if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
+		printk("Invalid CFI ident structure.\n");
+		return;
+	}	
+#endif		
+	printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
+	if (cfip->P_ADR)
+		printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
+	else
+		printk("No Primary Algorithm Table\n");
+	
+	printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
+	if (cfip->A_ADR)
+		printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
+	else
+		printk("No Alternate Algorithm Table\n");
+		
+		
+	printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
+	printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
+	if (cfip->VppMin) {
+		printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
+		printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
+	}
+	else
+		printk("No Vpp line\n");
+	
+	printk("Typical byte/word write timeout: %d �s\n", 1<<cfip->WordWriteTimeoutTyp);
+	printk("Maximum byte/word write timeout: %d �s\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
+	
+	if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
+		printk("Typical full buffer write timeout: %d �s\n", 1<<cfip->BufWriteTimeoutTyp);
+		printk("Maximum full buffer write timeout: %d �s\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
+	}
+	else
+		printk("Full buffer write not supported\n");
+	
+	printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
+	printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
+	if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {
+		printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp); 
+		printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
+	}
+	else
+		printk("Chip erase not supported\n");
+	
+	printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
+	printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
+	switch(cfip->InterfaceDesc) {
+	case 0:
+		printk("  - x8-only asynchronous interface\n");
+		break;
+		
+	case 1:
+		printk("  - x16-only asynchronous interface\n");
+		break;
+		
+	case 2:
+		printk("  - supports x8 and x16 via BYTE# with asynchronous interface\n");
+		break;
+		
+	case 3:
+		printk("  - x32-only asynchronous interface\n");
+		break;
+		
+	case 4:
+		printk("  - supports x16 and x32 via Word# with asynchronous interface\n");
+		break;
+		
+	case 65535:
+		printk("  - Not Allowed / Reserved\n");
+		break;
+		
+	default:
+		printk("  - Unknown\n");
+		break;
+	}
+	
+	printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
+	printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
+	
+}
+#endif /* DEBUG_CFI */
+
+static struct chip_probe cfi_chip_probe = {
+	.name		= "CFI",
+	.probe_chip	= cfi_probe_chip
+};
+
+struct mtd_info *cfi_probe(struct map_info *map)
+{
+	/*
+	 * Just use the generic probe stuff to call our CFI-specific
+	 * chip_probe routine in all the possible permutations, etc.
+	 */
+	return mtd_do_chip_probe(map, &cfi_chip_probe);
+}
+
+static struct mtd_chip_driver cfi_chipdrv = {
+	.probe		= cfi_probe,
+	.name		= "cfi_probe",
+	.module		= THIS_MODULE
+};
+
+int __init cfi_probe_init(void)
+{
+	register_mtd_chip_driver(&cfi_chipdrv);
+	return 0;
+}
+
+static void __exit cfi_probe_exit(void)
+{
+	unregister_mtd_chip_driver(&cfi_chipdrv);
+}
+
+module_init(cfi_probe_init);
+module_exit(cfi_probe_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
+MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
new file mode 100644
index 000000000000..2b2ede2bfcca
--- /dev/null
+++ b/drivers/mtd/chips/cfi_util.c
@@ -0,0 +1,196 @@
+/*
+ * Common Flash Interface support:
+ *   Generic utility functions not dependant on command set
+ *
+ * Copyright (C) 2002 Red Hat
+ * Copyright (C) 2003 STMicroelectronics Limited
+ *
+ * This code is covered by the GPL.
+ *
+ * $Id: cfi_util.c,v 1.8 2004/12/14 19:55:56 nico Exp $
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/xip.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/compatmac.h>
+
+struct cfi_extquery *
+__xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	__u32 base = 0; // cfi->chips[0].start;
+	int ofs_factor = cfi->interleave * cfi->device_type;
+	int i;
+	struct cfi_extquery *extp = NULL;
+
+	printk(" %s Extended Query Table at 0x%4.4X\n", name, adr);
+	if (!adr)
+		goto out;
+
+	extp = kmalloc(size, GFP_KERNEL);
+	if (!extp) {
+		printk(KERN_ERR "Failed to allocate memory\n");
+		goto out;
+	}
+
+#ifdef CONFIG_MTD_XIP
+	local_irq_disable();
+#endif
+
+	/* Switch it into Query Mode */
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
+
+	/* Read in the Extended Query Table */
+	for (i=0; i<size; i++) {
+		((unsigned char *)extp)[i] = 
+			cfi_read_query(map, base+((adr+i)*ofs_factor));
+	}
+
+	/* Make sure it returns to read mode */
+	cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xff, 0, base, map, cfi, cfi->device_type, NULL);
+
+#ifdef CONFIG_MTD_XIP
+	(void) map_read(map, base);
+	asm volatile (".rep 8; nop; .endr");
+	local_irq_enable();
+#endif
+
+	if (extp->MajorVersion != '1' || 
+	    (extp->MinorVersion < '0' || extp->MinorVersion > '3')) {
+		printk(KERN_WARNING "  Unknown %s Extended Query "
+		       "version %c.%c.\n",  name, extp->MajorVersion,
+		       extp->MinorVersion);
+		kfree(extp);
+		extp = NULL;
+	}
+
+ out:	return extp;
+}
+
+EXPORT_SYMBOL(cfi_read_pri);
+
+void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_fixup *f;
+
+	for (f=fixups; f->fixup; f++) {
+		if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
+		    ((f->id  == CFI_ID_ANY)  || (f->id  == cfi->id))) {
+			f->fixup(mtd, f->param);
+		}
+	}
+}
+
+EXPORT_SYMBOL(cfi_fixup);
+
+int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
+				     loff_t ofs, size_t len, void *thunk)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long adr;
+	int chipnum, ret = 0;
+	int i, first;
+	struct mtd_erase_region_info *regions = mtd->eraseregions;
+
+	if (ofs > mtd->size)
+		return -EINVAL;
+
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+
+	/* Check that both start and end of the requested erase are
+	 * aligned with the erasesize at the appropriate addresses.
+	 */
+
+	i = 0;
+
+	/* Skip all erase regions which are ended before the start of 
+	   the requested erase. Actually, to save on the calculations,
+	   we skip to the first erase region which starts after the
+	   start of the requested erase, and then go back one.
+	*/
+	
+	while (i < mtd->numeraseregions && ofs >= regions[i].offset)
+	       i++;
+	i--;
+
+	/* OK, now i is pointing at the erase region in which this 
+	   erase request starts. Check the start of the requested
+	   erase range is aligned with the erase size which is in
+	   effect here.
+	*/
+
+	if (ofs & (regions[i].erasesize-1))
+		return -EINVAL;
+
+	/* Remember the erase region we start on */
+	first = i;
+
+	/* Next, check that the end of the requested erase is aligned
+	 * with the erase region at that address.
+	 */
+
+	while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset)
+		i++;
+
+	/* As before, drop back one to point at the region in which
+	   the address actually falls
+	*/
+	i--;
+	
+	if ((ofs + len) & (regions[i].erasesize-1))
+		return -EINVAL;
+
+	chipnum = ofs >> cfi->chipshift;
+	adr = ofs - (chipnum << cfi->chipshift);
+
+	i=first;
+
+	while(len) {
+		int size = regions[i].erasesize;
+
+		ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk);
+		
+		if (ret)
+			return ret;
+
+		adr += size;
+		ofs += size;
+		len -= size;
+
+		if (ofs == regions[i].offset + size * regions[i].numblocks)
+			i++;
+
+		if (adr >> cfi->chipshift) {
+			adr = 0;
+			chipnum++;
+			
+			if (chipnum >= cfi->numchips)
+			break;
+		}
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(cfi_varsize_frob);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
new file mode 100644
index 000000000000..d7d739a108ae
--- /dev/null
+++ b/drivers/mtd/chips/chipreg.c
@@ -0,0 +1,111 @@
+/*
+ * $Id: chipreg.c,v 1.17 2004/11/16 18:29:00 dwmw2 Exp $
+ *
+ * Registration for chip drivers
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/compatmac.h>
+
+static DEFINE_SPINLOCK(chip_drvs_lock);
+static LIST_HEAD(chip_drvs_list);
+
+void register_mtd_chip_driver(struct mtd_chip_driver *drv)
+{
+	spin_lock(&chip_drvs_lock);
+	list_add(&drv->list, &chip_drvs_list);
+	spin_unlock(&chip_drvs_lock);
+}
+
+void unregister_mtd_chip_driver(struct mtd_chip_driver *drv)
+{
+	spin_lock(&chip_drvs_lock);
+	list_del(&drv->list);
+	spin_unlock(&chip_drvs_lock);
+}
+
+static struct mtd_chip_driver *get_mtd_chip_driver (const char *name)
+{
+	struct list_head *pos;
+	struct mtd_chip_driver *ret = NULL, *this;
+
+	spin_lock(&chip_drvs_lock);
+
+	list_for_each(pos, &chip_drvs_list) {
+		this = list_entry(pos, typeof(*this), list);
+		
+		if (!strcmp(this->name, name)) {
+			ret = this;
+			break;
+		}
+	}
+	if (ret && !try_module_get(ret->module))
+		ret = NULL;
+
+	spin_unlock(&chip_drvs_lock);
+
+	return ret;
+}
+
+	/* Hide all the horrid details, like some silly person taking
+	   get_module_symbol() away from us, from the caller. */
+
+struct mtd_info *do_map_probe(const char *name, struct map_info *map)
+{
+	struct mtd_chip_driver *drv;
+	struct mtd_info *ret;
+
+	drv = get_mtd_chip_driver(name);
+
+	if (!drv && !request_module("%s", name))
+		drv = get_mtd_chip_driver(name);
+
+	if (!drv)
+		return NULL;
+
+	ret = drv->probe(map);
+
+	/* We decrease the use count here. It may have been a 
+	   probe-only module, which is no longer required from this
+	   point, having given us a handle on (and increased the use
+	   count of) the actual driver code.
+	*/
+	module_put(drv->module);
+
+	if (ret)
+		return ret;
+	
+	return NULL;
+}
+/*
+ * Destroy an MTD device which was created for a map device.
+ * Make sure the MTD device is already unregistered before calling this
+ */
+void map_destroy(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+
+	if (map->fldrv->destroy)
+		map->fldrv->destroy(mtd);
+
+	module_put(map->fldrv->module);
+
+	kfree(mtd);
+}
+
+EXPORT_SYMBOL(register_mtd_chip_driver);
+EXPORT_SYMBOL(unregister_mtd_chip_driver);
+EXPORT_SYMBOL(do_map_probe);
+EXPORT_SYMBOL(map_destroy);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Core routines for registering and invoking MTD chip drivers");
diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h
new file mode 100644
index 000000000000..fbf44708a861
--- /dev/null
+++ b/drivers/mtd/chips/fwh_lock.h
@@ -0,0 +1,107 @@
+#ifndef FWH_LOCK_H
+#define FWH_LOCK_H
+
+
+enum fwh_lock_state {
+        FWH_UNLOCKED   = 0,
+	FWH_DENY_WRITE = 1,
+	FWH_IMMUTABLE  = 2,
+	FWH_DENY_READ  = 4,
+};
+
+struct fwh_xxlock_thunk {
+	enum fwh_lock_state val;
+	flstate_t state;
+};
+
+
+#define FWH_XXLOCK_ONEBLOCK_LOCK   ((struct fwh_xxlock_thunk){ FWH_DENY_WRITE, FL_LOCKING})
+#define FWH_XXLOCK_ONEBLOCK_UNLOCK ((struct fwh_xxlock_thunk){ FWH_UNLOCKED,   FL_UNLOCKING})
+
+/*
+ * This locking/unlock is specific to firmware hub parts.  Only one
+ * is known that supports the Intel command set.    Firmware
+ * hub parts cannot be interleaved as they are on the LPC bus
+ * so this code has not been tested with interleaved chips,
+ * and will likely fail in that context.
+ */
+static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip, 
+	unsigned long adr, int len, void *thunk)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct fwh_xxlock_thunk *xxlt = (struct fwh_xxlock_thunk *)thunk;
+	int ret;
+
+	/* Refuse the operation if the we cannot look behind the chip */
+	if (chip->start < 0x400000) {
+		DEBUG( MTD_DEBUG_LEVEL3,
+			"MTD %s(): chip->start: %lx wanted >= 0x400000\n",
+			__func__, chip->start );
+		return -EIO;
+	}
+	/*
+	 * lock block registers:
+	 * - on 64k boundariesand
+	 * - bit 1 set high
+	 * - block lock registers are 4MiB lower - overflow subtract (danger)
+	 * 
+	 * The address manipulation is first done on the logical address
+	 * which is 0 at the start of the chip, and then the offset of
+	 * the individual chip is addted to it.  Any other order a weird
+	 * map offset could cause problems.
+	 */
+	adr = (adr & ~0xffffUL) | 0x2;
+	adr += chip->start - 0x400000;
+
+	/*
+	 * This is easy because these are writes to registers and not writes
+	 * to flash memory - that means that we don't have to check status
+	 * and timeout.
+	 */
+	cfi_spin_lock(chip->mutex);
+	ret = get_chip(map, chip, adr, FL_LOCKING);
+	if (ret) {
+		cfi_spin_unlock(chip->mutex);
+		return ret;
+	}
+
+	chip->state = xxlt->state;
+	map_write(map, CMD(xxlt->val), adr);
+
+	/* Done and happy. */
+	chip->state = FL_READY;
+	put_chip(map, chip, adr);
+	cfi_spin_unlock(chip->mutex);
+	return 0;
+}
+
+
+static int fwh_lock_varsize(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	int ret;
+
+	ret = cfi_varsize_frob(mtd, fwh_xxlock_oneblock, ofs, len,
+		(void *)&FWH_XXLOCK_ONEBLOCK_LOCK);
+
+	return ret;
+}
+
+
+static int fwh_unlock_varsize(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	int ret;
+
+	ret = cfi_varsize_frob(mtd, fwh_xxlock_oneblock, ofs, len,
+		(void *)&FWH_XXLOCK_ONEBLOCK_UNLOCK);
+	
+	return ret;
+}
+
+static void fixup_use_fwh_lock(struct mtd_info *mtd, void *param)
+{
+	printk(KERN_NOTICE "using fwh lock/unlock method\n");
+	/* Setup for the chips with the fwh lock method */
+	mtd->lock   = fwh_lock_varsize;
+	mtd->unlock = fwh_unlock_varsize;
+}
+#endif /* FWH_LOCK_H */
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
new file mode 100644
index 000000000000..fc982c4671f0
--- /dev/null
+++ b/drivers/mtd/chips/gen_probe.c
@@ -0,0 +1,255 @@
+/*
+ * Routines common to all CFI-type probes.
+ * (C) 2001-2003 Red Hat, Inc.
+ * GPL'd
+ * $Id: gen_probe.c,v 1.21 2004/08/14 15:14:05 dwmw2 Exp $
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/gen_probe.h>
+
+static struct mtd_info *check_cmd_set(struct map_info *, int);
+static struct cfi_private *genprobe_ident_chips(struct map_info *map,
+						struct chip_probe *cp);
+static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp,
+			     struct cfi_private *cfi);
+
+struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp)
+{
+	struct mtd_info *mtd = NULL;
+	struct cfi_private *cfi;
+
+	/* First probe the map to see if we have CFI stuff there. */
+	cfi = genprobe_ident_chips(map, cp);
+	
+	if (!cfi)
+		return NULL;
+
+	map->fldrv_priv = cfi;
+	/* OK we liked it. Now find a driver for the command set it talks */
+
+	mtd = check_cmd_set(map, 1); /* First the primary cmdset */
+	if (!mtd)
+		mtd = check_cmd_set(map, 0); /* Then the secondary */
+	
+	if (mtd)
+		return mtd;
+
+	printk(KERN_WARNING"gen_probe: No supported Vendor Command Set found\n");
+	
+	kfree(cfi->cfiq);
+	kfree(cfi);
+	map->fldrv_priv = NULL;
+	return NULL;
+}
+EXPORT_SYMBOL(mtd_do_chip_probe);
+
+
+static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe *cp)
+{
+	struct cfi_private cfi;
+	struct cfi_private *retcfi;
+	unsigned long *chip_map;
+	int i, j, mapsize;
+	int max_chips;
+
+	memset(&cfi, 0, sizeof(cfi));
+
+	/* Call the probetype-specific code with all permutations of 
+	   interleave and device type, etc. */
+	if (!genprobe_new_chip(map, cp, &cfi)) {
+		/* The probe didn't like it */
+		printk(KERN_DEBUG "%s: Found no %s device at location zero\n",
+		       cp->name, map->name);
+		return NULL;
+	}		
+
+#if 0 /* Let the CFI probe routine do this sanity check. The Intel and AMD
+	 probe routines won't ever return a broken CFI structure anyway,
+	 because they make them up themselves.
+      */
+	if (cfi.cfiq->NumEraseRegions == 0) {
+		printk(KERN_WARNING "Number of erase regions is zero\n");
+		kfree(cfi.cfiq);
+		return NULL;
+	}
+#endif
+	cfi.chipshift = cfi.cfiq->DevSize;
+
+	if (cfi_interleave_is_1(&cfi)) {
+		;
+	} else if (cfi_interleave_is_2(&cfi)) {
+		cfi.chipshift++;
+	} else if (cfi_interleave_is_4((&cfi))) {
+		cfi.chipshift += 2;
+	} else if (cfi_interleave_is_8(&cfi)) {
+		cfi.chipshift += 3;
+	} else {
+		BUG();
+	}
+		
+	cfi.numchips = 1;
+
+	/* 
+	 * Allocate memory for bitmap of valid chips. 
+	 * Align bitmap storage size to full byte. 
+	 */ 
+	max_chips = map->size >> cfi.chipshift;
+	mapsize = (max_chips / 8) + ((max_chips % 8) ? 1 : 0);
+	chip_map = kmalloc(mapsize, GFP_KERNEL);
+	if (!chip_map) {
+		printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
+		kfree(cfi.cfiq);
+		return NULL;
+	}
+	memset (chip_map, 0, mapsize);
+
+	set_bit(0, chip_map); /* Mark first chip valid */
+
+	/*
+	 * Now probe for other chips, checking sensibly for aliases while
+	 * we're at it. The new_chip probe above should have let the first
+	 * chip in read mode.
+	 */
+
+	for (i = 1; i < max_chips; i++) {
+		cp->probe_chip(map, i << cfi.chipshift, chip_map, &cfi);
+	}
+
+	/*
+	 * Now allocate the space for the structures we need to return to 
+	 * our caller, and copy the appropriate data into them.
+	 */
+
+	retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL);
+
+	if (!retcfi) {
+		printk(KERN_WARNING "%s: kmalloc failed for CFI private structure\n", map->name);
+		kfree(cfi.cfiq);
+		kfree(chip_map);
+		return NULL;
+	}
+
+	memcpy(retcfi, &cfi, sizeof(cfi));
+	memset(&retcfi->chips[0], 0, sizeof(struct flchip) * cfi.numchips);
+
+	for (i = 0, j = 0; (j < cfi.numchips) && (i < max_chips); i++) {
+		if(test_bit(i, chip_map)) {
+			struct flchip *pchip = &retcfi->chips[j++];
+
+			pchip->start = (i << cfi.chipshift);
+			pchip->state = FL_READY;
+			init_waitqueue_head(&pchip->wq);
+			spin_lock_init(&pchip->_spinlock);
+			pchip->mutex = &pchip->_spinlock;
+		}
+	}
+
+	kfree(chip_map);
+	return retcfi;
+}
+
+	
+static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp,
+			     struct cfi_private *cfi)
+{
+	int min_chips = (map_bankwidth(map)/4?:1); /* At most 4-bytes wide. */
+	int max_chips = map_bankwidth(map); /* And minimum 1 */
+	int nr_chips, type;
+
+	for (nr_chips = min_chips; nr_chips <= max_chips; nr_chips <<= 1) {
+
+		if (!cfi_interleave_supported(nr_chips))
+		    continue;
+
+		cfi->interleave = nr_chips;
+
+		/* Minimum device size. Don't look for one 8-bit device
+		   in a 16-bit bus, etc. */
+		type = map_bankwidth(map) / nr_chips;
+
+		for (; type <= CFI_DEVICETYPE_X32; type<<=1) {
+			cfi->device_type = type;
+
+			if (cp->probe_chip(map, 0, NULL, cfi))
+				return 1;
+		}
+	}
+	return 0;
+}
+
+typedef struct mtd_info *cfi_cmdset_fn_t(struct map_info *, int);
+
+extern cfi_cmdset_fn_t cfi_cmdset_0001;
+extern cfi_cmdset_fn_t cfi_cmdset_0002;
+extern cfi_cmdset_fn_t cfi_cmdset_0020;
+
+static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map, 
+						  int primary)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	__u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID;
+#if defined(CONFIG_MODULES) && defined(HAVE_INTER_MODULE)
+	char probename[32];
+	cfi_cmdset_fn_t *probe_function;
+
+	sprintf(probename, "cfi_cmdset_%4.4X", type);
+		
+	probe_function = inter_module_get_request(probename, probename);
+
+	if (probe_function) {
+		struct mtd_info *mtd;
+
+		mtd = (*probe_function)(map, primary);
+		/* If it was happy, it'll have increased its own use count */
+		inter_module_put(probename);
+		return mtd;
+	}
+#endif
+	printk(KERN_NOTICE "Support for command set %04X not present\n",
+	       type);
+
+	return NULL;
+}
+
+static struct mtd_info *check_cmd_set(struct map_info *map, int primary)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	__u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID;
+	
+	if (type == P_ID_NONE || type == P_ID_RESERVED)
+		return NULL;
+
+	switch(type){
+		/* Urgh. Ifdefs. The version with weak symbols was
+		 * _much_ nicer. Shame it didn't seem to work on
+		 * anything but x86, really.
+		 * But we can't rely in inter_module_get() because
+		 * that'd mean we depend on link order.
+		 */
+#ifdef CONFIG_MTD_CFI_INTELEXT
+	case 0x0001:
+	case 0x0003:
+		return cfi_cmdset_0001(map, primary);
+#endif
+#ifdef CONFIG_MTD_CFI_AMDSTD
+	case 0x0002:
+		return cfi_cmdset_0002(map, primary);
+#endif
+#ifdef CONFIG_MTD_CFI_STAA
+        case 0x0020:
+		return cfi_cmdset_0020(map, primary);
+#endif
+	}
+
+	return cfi_cmdset_unknown(map, primary);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Helper routines for flash chip probe code");
diff --git a/drivers/mtd/chips/jedec.c b/drivers/mtd/chips/jedec.c
new file mode 100644
index 000000000000..62d235a9a4e2
--- /dev/null
+++ b/drivers/mtd/chips/jedec.c
@@ -0,0 +1,934 @@
+
+/* JEDEC Flash Interface.
+ * This is an older type of interface for self programming flash. It is 
+ * commonly use in older AMD chips and is obsolete compared with CFI.
+ * It is called JEDEC because the JEDEC association distributes the ID codes
+ * for the chips.
+ *
+ * See the AMD flash databook for information on how to operate the interface.
+ *
+ * This code does not support anything wider than 8 bit flash chips, I am
+ * not going to guess how to send commands to them, plus I expect they will
+ * all speak CFI..
+ *
+ * $Id: jedec.c,v 1.22 2005/01/05 18:05:11 dwmw2 Exp $
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mtd/jedec.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/compatmac.h>
+
+static struct mtd_info *jedec_probe(struct map_info *);
+static int jedec_probe8(struct map_info *map,unsigned long base,
+		  struct jedec_private *priv);
+static int jedec_probe16(struct map_info *map,unsigned long base,
+		  struct jedec_private *priv);
+static int jedec_probe32(struct map_info *map,unsigned long base,
+		  struct jedec_private *priv);
+static void jedec_flash_chip_scan(struct jedec_private *priv,unsigned long start,
+			    unsigned long len);
+static int flash_erase(struct mtd_info *mtd, struct erase_info *instr);
+static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
+		       size_t *retlen, const u_char *buf);
+
+static unsigned long my_bank_size;
+
+/* Listing of parts and sizes. We need this table to learn the sector
+   size of the chip and the total length */
+static const struct JEDECTable JEDEC_table[] = {
+	{
+		.jedec		= 0x013D,
+		.name		= "AMD Am29F017D",
+		.size		= 2*1024*1024,
+		.sectorsize	= 64*1024,
+		.capabilities	= MTD_CAP_NORFLASH
+	},
+	{
+		.jedec		= 0x01AD,
+		.name		= "AMD Am29F016",
+		.size		= 2*1024*1024,
+		.sectorsize	= 64*1024,
+		.capabilities	= MTD_CAP_NORFLASH
+	},
+	{
+		.jedec		= 0x01D5,
+		.name		= "AMD Am29F080",
+		.size		= 1*1024*1024,
+		.sectorsize	= 64*1024,
+		.capabilities	= MTD_CAP_NORFLASH
+	},
+	{
+		.jedec		= 0x01A4,
+		.name		= "AMD Am29F040",
+		.size		= 512*1024,
+		.sectorsize	= 64*1024,
+		.capabilities	= MTD_CAP_NORFLASH
+	},
+	{
+		.jedec		= 0x20E3,
+		.name		= "AMD Am29W040B",
+		.size		= 512*1024,
+		.sectorsize	= 64*1024,
+		.capabilities	= MTD_CAP_NORFLASH
+	},
+	{
+		.jedec		= 0xC2AD,
+		.name		= "Macronix MX29F016",
+		.size		= 2*1024*1024,
+		.sectorsize	= 64*1024,
+		.capabilities	= MTD_CAP_NORFLASH
+	},
+	{ .jedec = 0x0 }
+};
+
+static const struct JEDECTable *jedec_idtoinf(__u8 mfr,__u8 id);
+static void jedec_sync(struct mtd_info *mtd) {};
+static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len, 
+		      size_t *retlen, u_char *buf);
+static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len, 
+			     size_t *retlen, u_char *buf);
+
+static struct mtd_info *jedec_probe(struct map_info *map);
+
+
+
+static struct mtd_chip_driver jedec_chipdrv = {
+	.probe	= jedec_probe,
+	.name	= "jedec",
+	.module	= THIS_MODULE
+};
+
+/* Probe entry point */
+
+static struct mtd_info *jedec_probe(struct map_info *map)
+{
+   struct mtd_info *MTD;
+   struct jedec_private *priv;
+   unsigned long Base;
+   unsigned long SectorSize;
+   unsigned count;
+   unsigned I,Uniq;
+   char Part[200];
+   memset(&priv,0,sizeof(priv));
+
+   MTD = kmalloc(sizeof(struct mtd_info) + sizeof(struct jedec_private), GFP_KERNEL);
+   if (!MTD)
+	   return NULL;
+
+   memset(MTD, 0, sizeof(struct mtd_info) + sizeof(struct jedec_private));
+   priv = (struct jedec_private *)&MTD[1];
+   
+   my_bank_size = map->size;
+
+   if (map->size/my_bank_size > MAX_JEDEC_CHIPS)
+   {
+      printk("mtd: Increase MAX_JEDEC_CHIPS, too many banks.\n");
+      kfree(MTD);
+      return NULL;
+   }
+   
+   for (Base = 0; Base < map->size; Base += my_bank_size)
+   {
+      // Perhaps zero could designate all tests?
+      if (map->buswidth == 0)
+	 map->buswidth = 1;
+      
+      if (map->buswidth == 1){
+	 if (jedec_probe8(map,Base,priv) == 0) {
+		 printk("did recognize jedec chip\n");
+		 kfree(MTD);
+	         return NULL;
+	 }
+      }
+      if (map->buswidth == 2)
+	 jedec_probe16(map,Base,priv);
+      if (map->buswidth == 4)
+	 jedec_probe32(map,Base,priv);
+   }
+   
+   // Get the biggest sector size
+   SectorSize = 0;
+   for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
+   {
+	   //	   printk("priv->chips[%d].jedec is %x\n",I,priv->chips[I].jedec);
+	   //	   printk("priv->chips[%d].sectorsize is %lx\n",I,priv->chips[I].sectorsize);
+      if (priv->chips[I].sectorsize > SectorSize)
+	 SectorSize = priv->chips[I].sectorsize;
+   }
+   
+   // Quickly ensure that the other sector sizes are factors of the largest
+   for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
+   {
+      if ((SectorSize/priv->chips[I].sectorsize)*priv->chips[I].sectorsize != SectorSize)
+      {
+	 printk("mtd: Failed. Device has incompatible mixed sector sizes\n");
+	 kfree(MTD);
+	 return NULL;
+      }      
+   }
+   
+   /* Generate a part name that includes the number of different chips and
+      other configuration information */
+   count = 1;
+   strlcpy(Part,map->name,sizeof(Part)-10);
+   strcat(Part," ");
+   Uniq = 0;
+   for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
+   {
+      const struct JEDECTable *JEDEC;
+      
+      if (priv->chips[I+1].jedec == priv->chips[I].jedec)
+      {
+	 count++;
+	 continue;
+      }
+      
+      // Locate the chip in the jedec table
+      JEDEC = jedec_idtoinf(priv->chips[I].jedec >> 8,priv->chips[I].jedec);
+      if (JEDEC == 0)
+      {
+	 printk("mtd: Internal Error, JEDEC not set\n");
+	 kfree(MTD);
+	 return NULL;
+      }
+      
+      if (Uniq != 0)
+	 strcat(Part,",");
+      Uniq++;
+      
+      if (count != 1)
+	 sprintf(Part+strlen(Part),"%x*[%s]",count,JEDEC->name);
+      else
+	 sprintf(Part+strlen(Part),"%s",JEDEC->name);
+      if (strlen(Part) > sizeof(Part)*2/3)
+	 break;
+      count = 1;
+   }   
+
+   /* Determine if the chips are organized in a linear fashion, or if there
+      are empty banks. Note, the last bank does not count here, only the
+      first banks are important. Holes on non-bank boundaries can not exist
+      due to the way the detection algorithm works. */
+   if (priv->size < my_bank_size)
+      my_bank_size = priv->size;
+   priv->is_banked = 0;
+   //printk("priv->size is %x, my_bank_size is %x\n",priv->size,my_bank_size);
+   //printk("priv->bank_fill[0] is %x\n",priv->bank_fill[0]);
+   if (!priv->size) {
+	   printk("priv->size is zero\n");
+	   kfree(MTD);
+	   return NULL;
+   }
+   if (priv->size/my_bank_size) {
+	   if (priv->size/my_bank_size == 1) {
+		   priv->size = my_bank_size;
+	   }
+	   else {
+		   for (I = 0; I != priv->size/my_bank_size - 1; I++)
+		   {
+		      if (priv->bank_fill[I] != my_bank_size)
+			 priv->is_banked = 1;
+		      
+		      /* This even could be eliminated, but new de-optimized read/write
+			 functions have to be written */
+		      printk("priv->bank_fill[%d] is %lx, priv->bank_fill[0] is %lx\n",I,priv->bank_fill[I],priv->bank_fill[0]);
+		      if (priv->bank_fill[I] != priv->bank_fill[0])
+		      {
+			 printk("mtd: Failed. Cannot handle unsymmetric banking\n");
+			 kfree(MTD);
+			 return NULL;
+		      }      
+		   }
+	   }
+   }
+   if (priv->is_banked == 1)
+      strcat(Part,", banked");
+
+   //   printk("Part: '%s'\n",Part);
+   
+   memset(MTD,0,sizeof(*MTD));
+  // strlcpy(MTD->name,Part,sizeof(MTD->name));
+   MTD->name = map->name;
+   MTD->type = MTD_NORFLASH;
+   MTD->flags = MTD_CAP_NORFLASH;
+   MTD->erasesize = SectorSize*(map->buswidth);
+   //   printk("MTD->erasesize is %x\n",(unsigned int)MTD->erasesize);
+   MTD->size = priv->size;
+   //   printk("MTD->size is %x\n",(unsigned int)MTD->size);
+   //MTD->module = THIS_MODULE; // ? Maybe this should be the low level module?
+   MTD->erase = flash_erase;
+   if (priv->is_banked == 1)
+      MTD->read = jedec_read_banked;
+   else
+      MTD->read = jedec_read;
+   MTD->write = flash_write;
+   MTD->sync = jedec_sync;
+   MTD->priv = map;
+   map->fldrv_priv = priv;
+   map->fldrv = &jedec_chipdrv;
+   __module_get(THIS_MODULE);
+   return MTD;
+}
+
+/* Helper for the JEDEC function, JEDEC numbers all have odd parity */
+static int checkparity(u_char C)
+{
+   u_char parity = 0;
+   while (C != 0)
+   {
+      parity ^= C & 1;
+      C >>= 1;
+   }
+
+   return parity == 1;
+}
+
+
+/* Take an array of JEDEC numbers that represent interleved flash chips
+   and process them. Check to make sure they are good JEDEC numbers, look
+   them up and then add them to the chip list */   
+static int handle_jedecs(struct map_info *map,__u8 *Mfg,__u8 *Id,unsigned Count,
+		  unsigned long base,struct jedec_private *priv)
+{
+   unsigned I,J;
+   unsigned long Size;
+   unsigned long SectorSize;
+   const struct JEDECTable *JEDEC;
+
+   // Test #2 JEDEC numbers exhibit odd parity
+   for (I = 0; I != Count; I++)
+   {
+      if (checkparity(Mfg[I]) == 0 || checkparity(Id[I]) == 0)
+	 return 0;
+   }
+   
+   // Finally, just make sure all the chip sizes are the same
+   JEDEC = jedec_idtoinf(Mfg[0],Id[0]);
+   
+   if (JEDEC == 0)
+   {
+      printk("mtd: Found JEDEC flash chip, but do not have a table entry for %x:%x\n",Mfg[0],Mfg[1]);
+      return 0;
+   }
+   
+   Size = JEDEC->size;
+   SectorSize = JEDEC->sectorsize;
+   for (I = 0; I != Count; I++)
+   {
+      JEDEC = jedec_idtoinf(Mfg[0],Id[0]);
+      if (JEDEC == 0)
+      {
+	 printk("mtd: Found JEDEC flash chip, but do not have a table entry for %x:%x\n",Mfg[0],Mfg[1]);
+	 return 0;
+      }
+
+      if (Size != JEDEC->size || SectorSize != JEDEC->sectorsize)
+      {
+	 printk("mtd: Failed. Interleved flash does not have matching characteristics\n");
+	 return 0;
+      }      
+   }
+
+   // Load the Chips
+   for (I = 0; I != MAX_JEDEC_CHIPS; I++)
+   {
+      if (priv->chips[I].jedec == 0)
+	 break;
+   }
+
+   if (I + Count > MAX_JEDEC_CHIPS)
+   {
+      printk("mtd: Device has too many chips. Increase MAX_JEDEC_CHIPS\n");
+      return 0;
+   }      
+   
+   // Add them to the table
+   for (J = 0; J != Count; J++)
+   {
+      unsigned long Bank;
+	 
+      JEDEC = jedec_idtoinf(Mfg[J],Id[J]);
+      priv->chips[I].jedec = (Mfg[J] << 8) | Id[J];
+      priv->chips[I].size = JEDEC->size;
+      priv->chips[I].sectorsize = JEDEC->sectorsize;
+      priv->chips[I].base = base + J;
+      priv->chips[I].datashift = J*8;
+      priv->chips[I].capabilities = JEDEC->capabilities;
+      priv->chips[I].offset = priv->size + J;
+
+      // log2 n :|
+      priv->chips[I].addrshift = 0;
+      for (Bank = Count; Bank != 1; Bank >>= 1, priv->chips[I].addrshift++);
+      
+      // Determine how filled this bank is.
+      Bank = base & (~(my_bank_size-1));
+      if (priv->bank_fill[Bank/my_bank_size] < base + 
+	  (JEDEC->size << priv->chips[I].addrshift) - Bank)
+	 priv->bank_fill[Bank/my_bank_size] =  base + (JEDEC->size << priv->chips[I].addrshift) - Bank;
+      I++;
+   }
+
+   priv->size += priv->chips[I-1].size*Count;
+	 
+   return priv->chips[I-1].size;
+}
+
+/* Lookup the chip information from the JEDEC ID table. */
+static const struct JEDECTable *jedec_idtoinf(__u8 mfr,__u8 id)
+{
+   __u16 Id = (mfr << 8) | id;
+   unsigned long I = 0;
+   for (I = 0; JEDEC_table[I].jedec != 0; I++)
+      if (JEDEC_table[I].jedec == Id)
+	 return JEDEC_table + I;
+   return NULL;
+}
+
+// Look for flash using an 8 bit bus interface
+static int jedec_probe8(struct map_info *map,unsigned long base,
+		  struct jedec_private *priv)
+{ 
+   #define flread(x) map_read8(map,base+x)
+   #define flwrite(v,x) map_write8(map,v,base+x)
+
+   const unsigned long AutoSel1 = 0xAA;
+   const unsigned long AutoSel2 = 0x55;
+   const unsigned long AutoSel3 = 0x90;
+   const unsigned long Reset = 0xF0;
+   __u32 OldVal;
+   __u8 Mfg[1];
+   __u8 Id[1];
+   unsigned I;
+   unsigned long Size;
+
+   // Wait for any write/erase operation to settle
+   OldVal = flread(base);
+   for (I = 0; OldVal != flread(base) && I < 10000; I++)
+      OldVal = flread(base);
+   
+   // Reset the chip
+   flwrite(Reset,0x555); 
+   
+   // Send the sequence
+   flwrite(AutoSel1,0x555);
+   flwrite(AutoSel2,0x2AA);
+   flwrite(AutoSel3,0x555);
+   
+   //  Get the JEDEC numbers
+   Mfg[0] = flread(0);
+   Id[0] = flread(1);
+   //   printk("Mfg is %x, Id is %x\n",Mfg[0],Id[0]);
+      
+   Size = handle_jedecs(map,Mfg,Id,1,base,priv);
+   //   printk("handle_jedecs Size is %x\n",(unsigned int)Size);
+   if (Size == 0)
+   {
+      flwrite(Reset,0x555);
+      return 0;
+   }
+   
+
+   // Reset.
+   flwrite(Reset,0x555);
+   
+   return 1;
+   
+   #undef flread
+   #undef flwrite
+}
+
+// Look for flash using a 16 bit bus interface (ie 2 8-bit chips)
+static int jedec_probe16(struct map_info *map,unsigned long base,
+		  struct jedec_private *priv)
+{
+   return 0;
+}
+
+// Look for flash using a 32 bit bus interface (ie 4 8-bit chips)
+static int jedec_probe32(struct map_info *map,unsigned long base,
+		  struct jedec_private *priv)
+{
+   #define flread(x) map_read32(map,base+((x)<<2))
+   #define flwrite(v,x) map_write32(map,v,base+((x)<<2))
+
+   const unsigned long AutoSel1 = 0xAAAAAAAA;
+   const unsigned long AutoSel2 = 0x55555555;
+   const unsigned long AutoSel3 = 0x90909090;
+   const unsigned long Reset = 0xF0F0F0F0;
+   __u32 OldVal;
+   __u8 Mfg[4];
+   __u8 Id[4];
+   unsigned I;
+   unsigned long Size;
+
+   // Wait for any write/erase operation to settle
+   OldVal = flread(base);
+   for (I = 0; OldVal != flread(base) && I < 10000; I++)
+      OldVal = flread(base);
+   
+   // Reset the chip
+   flwrite(Reset,0x555); 
+   
+   // Send the sequence
+   flwrite(AutoSel1,0x555);
+   flwrite(AutoSel2,0x2AA);
+   flwrite(AutoSel3,0x555);
+   
+   // Test #1, JEDEC numbers are readable from 0x??00/0x??01
+   if (flread(0) != flread(0x100) || 
+       flread(1) != flread(0x101))
+   {
+      flwrite(Reset,0x555);
+      return 0;
+   }
+
+   // Split up the JEDEC numbers
+   OldVal = flread(0);
+   for (I = 0; I != 4; I++)
+      Mfg[I] = (OldVal >> (I*8));
+   OldVal = flread(1);
+   for (I = 0; I != 4; I++)
+      Id[I] = (OldVal >> (I*8));
+      
+   Size = handle_jedecs(map,Mfg,Id,4,base,priv);
+   if (Size == 0)
+   {
+      flwrite(Reset,0x555);
+      return 0;
+   }
+   
+   /* Check if there is address wrap around within a single bank, if this
+      returns JEDEC numbers then we assume that it is wrap around. Notice
+      we call this routine with the JEDEC return still enabled, if two or
+      more flashes have a truncated address space the probe test will still
+      work */
+   if (base + (Size<<2)+0x555 < map->size &&
+       base + (Size<<2)+0x555 < (base & (~(my_bank_size-1))) + my_bank_size)
+   {
+      if (flread(base+Size) != flread(base+Size + 0x100) ||
+	  flread(base+Size + 1) != flread(base+Size + 0x101))
+      {
+	 jedec_probe32(map,base+Size,priv);
+      }
+   }
+
+   // Reset.
+   flwrite(0xF0F0F0F0,0x555);
+   
+   return 1;
+   
+   #undef flread
+   #undef flwrite
+}
+
+/* Linear read. */
+static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len, 
+		      size_t *retlen, u_char *buf)
+{
+   struct map_info *map = mtd->priv;
+   
+   map_copy_from(map, buf, from, len);
+   *retlen = len;
+   return 0;   
+}
+
+/* Banked read. Take special care to jump past the holes in the bank
+   mapping. This version assumes symetry in the holes.. */
+static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len, 
+			     size_t *retlen, u_char *buf)
+{
+   struct map_info *map = mtd->priv;
+   struct jedec_private *priv = map->fldrv_priv;
+
+   *retlen = 0;
+   while (len > 0)
+   {
+      // Determine what bank and offset into that bank the first byte is
+      unsigned long bank = from & (~(priv->bank_fill[0]-1));
+      unsigned long offset = from & (priv->bank_fill[0]-1);
+      unsigned long get = len;
+      if (priv->bank_fill[0] - offset < len)
+	 get = priv->bank_fill[0] - offset;
+
+      bank /= priv->bank_fill[0];      
+      map_copy_from(map,buf + *retlen,bank*my_bank_size + offset,get);
+      
+      len -= get;
+      *retlen += get;
+      from += get;
+   }   
+   return 0;   
+}
+
+/* Pass the flags value that the flash return before it re-entered read 
+   mode. */
+static void jedec_flash_failed(unsigned char code)
+{
+   /* Bit 5 being high indicates that there was an internal device
+      failure, erasure time limits exceeded or something */
+   if ((code & (1 << 5)) != 0)
+   {
+      printk("mtd: Internal Flash failure\n");
+      return;
+   }
+   printk("mtd: Programming didn't take\n");
+}
+
+/* This uses the erasure function described in the AMD Flash Handbook, 
+   it will work for flashes with a fixed sector size only. Flashes with
+   a selection of sector sizes (ie the AMD Am29F800B) will need a different
+   routine. This routine tries to parallize erasing multiple chips/sectors 
+   where possible */
+static int flash_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+   // Does IO to the currently selected chip
+   #define flread(x) map_read8(map,chip->base+((x)<<chip->addrshift))
+   #define flwrite(v,x) map_write8(map,v,chip->base+((x)<<chip->addrshift))
+   
+   unsigned long Time = 0;
+   unsigned long NoTime = 0;
+   unsigned long start = instr->addr, len = instr->len;
+   unsigned int I;
+   struct map_info *map = mtd->priv;
+   struct jedec_private *priv = map->fldrv_priv;
+
+   // Verify the arguments..
+   if (start + len > mtd->size ||
+       (start % mtd->erasesize) != 0 ||
+       (len % mtd->erasesize) != 0 ||
+       (len/mtd->erasesize) == 0)
+      return -EINVAL;
+   
+   jedec_flash_chip_scan(priv,start,len);
+
+   // Start the erase sequence on each chip
+   for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
+   {
+      unsigned long off;
+      struct jedec_flash_chip *chip = priv->chips + I;
+      
+      if (chip->length == 0)
+	 continue;
+      
+      if (chip->start + chip->length > chip->size)
+      {
+	 printk("DIE\n");
+	 return -EIO;
+      }     
+      
+      flwrite(0xF0,chip->start + 0x555);
+      flwrite(0xAA,chip->start + 0x555);
+      flwrite(0x55,chip->start + 0x2AA);
+      flwrite(0x80,chip->start + 0x555);
+      flwrite(0xAA,chip->start + 0x555);
+      flwrite(0x55,chip->start + 0x2AA);
+
+      /* Once we start selecting the erase sectors the delay between each 
+         command must not exceed 50us or it will immediately start erasing 
+         and ignore the other sectors */
+      for (off = 0; off < len; off += chip->sectorsize)
+      {
+	 // Check to make sure we didn't timeout
+	 flwrite(0x30,chip->start + off);
+	 if (off == 0)
+	    continue;
+	 if ((flread(chip->start + off) & (1 << 3)) != 0)
+	 {
+	    printk("mtd: Ack! We timed out the erase timer!\n");
+	    return -EIO;
+	 }       	 
+      }
+   }   
+
+   /* We could split this into a timer routine and return early, performing
+      background erasure.. Maybe later if the need warrents */
+
+   /* Poll the flash for erasure completion, specs say this can take as long
+      as 480 seconds to do all the sectors (for a 2 meg flash). 
+      Erasure time is dependent on chip age, temp and wear.. */
+   
+   /* This being a generic routine assumes a 32 bit bus. It does read32s
+      and bundles interleved chips into the same grouping. This will work 
+      for all bus widths */
+   Time = 0;
+   NoTime = 0;
+   for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
+   {
+      struct jedec_flash_chip *chip = priv->chips + I;
+      unsigned long off = 0;
+      unsigned todo[4] = {0,0,0,0};
+      unsigned todo_left = 0;
+      unsigned J;
+      
+      if (chip->length == 0)
+	 continue;
+
+      /* Find all chips in this data line, realistically this is all 
+         or nothing up to the interleve count */
+      for (J = 0; priv->chips[J].jedec != 0 && J < MAX_JEDEC_CHIPS; J++)
+      {
+	 if ((priv->chips[J].base & (~((1<<chip->addrshift)-1))) == 
+	     (chip->base & (~((1<<chip->addrshift)-1))))
+	 {
+	    todo_left++;
+	    todo[priv->chips[J].base & ((1<<chip->addrshift)-1)] = 1;
+	 }	 
+      }
+
+      /*      printk("todo: %x %x %x %x\n",(short)todo[0],(short)todo[1],
+	      (short)todo[2],(short)todo[3]);
+      */
+      while (1)
+      {
+	 __u32 Last[4];
+	 unsigned long Count = 0;
+	 
+	 /* During erase bit 7 is held low and bit 6 toggles, we watch this,
+	    should it stop toggling or go high then the erase is completed,
+  	    or this is not really flash ;> */
+	 switch (map->buswidth) {
+	 case 1:
+	    Last[0] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    Last[1] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    Last[2] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    break;
+	 case 2:
+	    Last[0] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    Last[1] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    Last[2] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    break;
+	 case 3:
+	    Last[0] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    Last[1] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    Last[2] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off);
+	    break;
+	 }
+	 Count = 3;
+	 while (todo_left != 0)
+	 {
+	    for (J = 0; J != 4; J++)
+	    {
+	       __u8 Byte1 = (Last[(Count-1)%4] >> (J*8)) & 0xFF;
+	       __u8 Byte2 = (Last[(Count-2)%4] >> (J*8)) & 0xFF;
+	       __u8 Byte3 = (Last[(Count-3)%4] >> (J*8)) & 0xFF;
+	       if (todo[J] == 0)
+		  continue;
+	       
+	       if ((Byte1 & (1 << 7)) == 0 && Byte1 != Byte2)
+	       {
+//		  printk("Check %x %x %x\n",(short)J,(short)Byte1,(short)Byte2);
+		  continue;
+	       }
+	       
+	       if (Byte1 == Byte2)
+	       {
+		  jedec_flash_failed(Byte3);
+		  return -EIO;
+	       }
+	       
+	       todo[J] = 0;
+	       todo_left--;
+	    }
+	    
+/*	    if (NoTime == 0)
+	       Time += HZ/10 - schedule_timeout(HZ/10);*/
+	    NoTime = 0;
+
+	    switch (map->buswidth) {
+	    case 1:
+	       Last[Count % 4] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off);
+	      break;
+	    case 2:
+	       Last[Count % 4] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off);
+	      break;
+	    case 4:
+	       Last[Count % 4] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off);
+	      break;
+	    }
+	    Count++;
+	    
+/*	    // Count time, max of 15s per sector (according to AMD)
+	    if (Time > 15*len/mtd->erasesize*HZ)
+	    {
+	       printk("mtd: Flash Erase Timed out\n");
+	       return -EIO;
+	    }	    */
+	 }
+	 	 
+	 // Skip to the next chip if we used chip erase
+	 if (chip->length == chip->size)
+	    off = chip->size;
+	 else
+	    off += chip->sectorsize;
+	 
+	 if (off >= chip->length)
+	    break;
+	 NoTime = 1;
+      }
+      
+      for (J = 0; priv->chips[J].jedec != 0 && J < MAX_JEDEC_CHIPS; J++)
+      {
+	 if ((priv->chips[J].base & (~((1<<chip->addrshift)-1))) ==
+	     (chip->base & (~((1<<chip->addrshift)-1))))
+	    priv->chips[J].length = 0;
+      }      
+   }
+       	    
+   //printk("done\n");
+   instr->state = MTD_ERASE_DONE;
+   mtd_erase_callback(instr);
+   return 0;
+   
+   #undef flread
+   #undef flwrite
+}
+
+/* This is the simple flash writing function. It writes to every byte, in
+   sequence. It takes care of how to properly address the flash if
+   the flash is interleved. It can only be used if all the chips in the 
+   array are identical!*/
+static int flash_write(struct mtd_info *mtd, loff_t start, size_t len,
+		       size_t *retlen, const u_char *buf)
+{
+   /* Does IO to the currently selected chip. It takes the bank addressing
+      base (which is divisible by the chip size) adds the necessary lower bits
+      of addrshift (interleave index) and then adds the control register index. */
+   #define flread(x) map_read8(map,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift))
+   #define flwrite(v,x) map_write8(map,v,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift))
+   
+   struct map_info *map = mtd->priv;
+   struct jedec_private *priv = map->fldrv_priv;
+   unsigned long base;
+   unsigned long off;
+   size_t save_len = len;
+   
+   if (start + len > mtd->size)
+      return -EIO;
+   
+   //printk("Here");
+   
+   //printk("flash_write: start is %x, len is %x\n",start,(unsigned long)len);
+   while (len != 0)
+   {
+      struct jedec_flash_chip *chip = priv->chips;
+      unsigned long bank;
+      unsigned long boffset;
+	 
+      // Compute the base of the flash.
+      off = ((unsigned long)start) % (chip->size << chip->addrshift);
+      base = start - off;
+
+      // Perform banked addressing translation.
+      bank = base & (~(priv->bank_fill[0]-1));
+      boffset = base & (priv->bank_fill[0]-1);
+      bank = (bank/priv->bank_fill[0])*my_bank_size;
+      base = bank + boffset;
+      
+    //  printk("Flasing %X %X %X\n",base,chip->size,len);
+     // printk("off is %x, compare with %x\n",off,chip->size << chip->addrshift);
+      
+      // Loop over this page
+      for (; off != (chip->size << chip->addrshift) && len != 0; start++, len--, off++,buf++)
+      {
+	 unsigned char oldbyte = map_read8(map,base+off);
+	 unsigned char Last[4];
+	 unsigned long Count = 0;
+
+	 if (oldbyte == *buf) {
+	//	 printk("oldbyte and *buf is %x,len is %x\n",oldbyte,len);
+	    continue;
+	 }
+	 if (((~oldbyte) & *buf) != 0)
+	    printk("mtd: warn: Trying to set a 0 to a 1\n");
+	     
+	 // Write
+	 flwrite(0xAA,0x555);
+	 flwrite(0x55,0x2AA);
+	 flwrite(0xA0,0x555);
+	 map_write8(map,*buf,base + off);
+	 Last[0] = map_read8(map,base + off);
+	 Last[1] = map_read8(map,base + off);
+	 Last[2] = map_read8(map,base + off);
+	 
+	 /* Wait for the flash to finish the operation. We store the last 4
+	    status bytes that have been retrieved so we can determine why
+	    it failed. The toggle bits keep toggling when there is a 
+	    failure */
+	 for (Count = 3; Last[(Count - 1) % 4] != Last[(Count - 2) % 4] &&
+	      Count < 10000; Count++)
+	    Last[Count % 4] = map_read8(map,base + off);
+	 if (Last[(Count - 1) % 4] != *buf)
+	 {
+	    jedec_flash_failed(Last[(Count - 3) % 4]);
+	    return -EIO;
+	 }	 
+      }
+   }
+   *retlen = save_len;
+   return 0;
+}
+
+/* This is used to enhance the speed of the erase routine,
+   when things are being done to multiple chips it is possible to
+   parallize the operations, particularly full memory erases of multi
+   chip memories benifit */
+static void jedec_flash_chip_scan(struct jedec_private *priv,unsigned long start,
+		     unsigned long len)
+{
+   unsigned int I;
+
+   // Zero the records
+   for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
+      priv->chips[I].start = priv->chips[I].length = 0;
+   
+   // Intersect the region with each chip
+   for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++)
+   {
+      struct jedec_flash_chip *chip = priv->chips + I;
+      unsigned long ByteStart;
+      unsigned long ChipEndByte = chip->offset + (chip->size << chip->addrshift);
+      
+      // End is before this chip or the start is after it
+      if (start+len < chip->offset ||
+	  ChipEndByte - (1 << chip->addrshift) < start)
+	 continue;
+      
+      if (start < chip->offset)
+      {
+	 ByteStart = chip->offset;
+	 chip->start = 0;
+      }      
+      else
+      {
+	 chip->start = (start - chip->offset + (1 << chip->addrshift)-1) >> chip->addrshift;
+	 ByteStart = start;
+      }
+
+      if (start + len >= ChipEndByte)
+	 chip->length = (ChipEndByte - ByteStart) >> chip->addrshift;
+      else
+	 chip->length = (start + len - ByteStart + (1 << chip->addrshift)-1) >> chip->addrshift;
+   }
+}
+
+int __init jedec_init(void)
+{
+	register_mtd_chip_driver(&jedec_chipdrv);
+	return 0;
+}
+
+static void __exit jedec_exit(void)
+{
+	unregister_mtd_chip_driver(&jedec_chipdrv);
+}
+
+module_init(jedec_init);
+module_exit(jedec_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com> et al.");
+MODULE_DESCRIPTION("Old MTD chip driver for JEDEC-compliant flash chips");
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
new file mode 100644
index 000000000000..30325a25ab95
--- /dev/null
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -0,0 +1,2127 @@
+/* 
+   Common Flash Interface probe code.
+   (C) 2000 Red Hat. GPL'd.
+   $Id: jedec_probe.c,v 1.61 2004/11/19 20:52:16 thayne Exp $
+   See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5)
+   for the standard this probe goes back to.
+
+   Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/gen_probe.h>
+
+/* Manufacturers */
+#define MANUFACTURER_AMD	0x0001
+#define MANUFACTURER_ATMEL	0x001f
+#define MANUFACTURER_FUJITSU	0x0004
+#define MANUFACTURER_HYUNDAI	0x00AD
+#define MANUFACTURER_INTEL	0x0089
+#define MANUFACTURER_MACRONIX	0x00C2
+#define MANUFACTURER_NEC	0x0010
+#define MANUFACTURER_PMC	0x009D
+#define MANUFACTURER_SST	0x00BF
+#define MANUFACTURER_ST		0x0020
+#define MANUFACTURER_TOSHIBA	0x0098
+#define MANUFACTURER_WINBOND	0x00da
+
+
+/* AMD */
+#define AM29DL800BB	0x22C8
+#define AM29DL800BT	0x224A
+
+#define AM29F800BB	0x2258
+#define AM29F800BT	0x22D6
+#define AM29LV400BB	0x22BA
+#define AM29LV400BT	0x22B9
+#define AM29LV800BB	0x225B
+#define AM29LV800BT	0x22DA
+#define AM29LV160DT	0x22C4
+#define AM29LV160DB	0x2249
+#define AM29F017D	0x003D
+#define AM29F016D	0x00AD
+#define AM29F080	0x00D5
+#define AM29F040	0x00A4
+#define AM29LV040B	0x004F
+#define AM29F032B	0x0041
+#define AM29F002T	0x00B0
+
+/* Atmel */
+#define AT49BV512	0x0003
+#define AT29LV512	0x003d
+#define AT49BV16X	0x00C0
+#define AT49BV16XT	0x00C2
+#define AT49BV32X	0x00C8
+#define AT49BV32XT	0x00C9
+
+/* Fujitsu */
+#define MBM29F040C	0x00A4
+#define MBM29LV650UE	0x22D7
+#define MBM29LV320TE	0x22F6
+#define MBM29LV320BE	0x22F9
+#define MBM29LV160TE	0x22C4
+#define MBM29LV160BE	0x2249
+#define MBM29LV800BA	0x225B
+#define MBM29LV800TA	0x22DA
+#define MBM29LV400TC	0x22B9
+#define MBM29LV400BC	0x22BA
+
+/* Hyundai */
+#define HY29F002T	0x00B0
+
+/* Intel */
+#define I28F004B3T	0x00d4
+#define I28F004B3B	0x00d5
+#define I28F400B3T	0x8894
+#define I28F400B3B	0x8895
+#define I28F008S5	0x00a6
+#define I28F016S5	0x00a0
+#define I28F008SA	0x00a2
+#define I28F008B3T	0x00d2
+#define I28F008B3B	0x00d3
+#define I28F800B3T	0x8892
+#define I28F800B3B	0x8893
+#define I28F016S3	0x00aa
+#define I28F016B3T	0x00d0
+#define I28F016B3B	0x00d1
+#define I28F160B3T	0x8890
+#define I28F160B3B	0x8891
+#define I28F320B3T	0x8896
+#define I28F320B3B	0x8897
+#define I28F640B3T	0x8898
+#define I28F640B3B	0x8899
+#define I82802AB	0x00ad
+#define I82802AC	0x00ac
+
+/* Macronix */
+#define MX29LV040C	0x004F
+#define MX29LV160T	0x22C4
+#define MX29LV160B	0x2249
+#define MX29F016	0x00AD
+#define MX29F002T	0x00B0
+#define MX29F004T	0x0045
+#define MX29F004B	0x0046
+
+/* NEC */
+#define UPD29F064115	0x221C
+
+/* PMC */
+#define PM49FL002	0x006D
+#define PM49FL004	0x006E
+#define PM49FL008	0x006A
+
+/* ST - www.st.com */
+#define M29W800DT	0x00D7
+#define M29W800DB	0x005B
+#define M29W160DT	0x22C4
+#define M29W160DB	0x2249
+#define M29W040B	0x00E3
+#define M50FW040	0x002C
+#define M50FW080	0x002D
+#define M50FW016	0x002E
+#define M50LPW080       0x002F
+
+/* SST */
+#define SST29EE020	0x0010
+#define SST29LE020	0x0012
+#define SST29EE512	0x005d
+#define SST29LE512	0x003d
+#define SST39LF800	0x2781
+#define SST39LF160	0x2782
+#define SST39LF512	0x00D4
+#define SST39LF010	0x00D5
+#define SST39LF020	0x00D6
+#define SST39LF040	0x00D7
+#define SST39SF010A	0x00B5
+#define SST39SF020A	0x00B6
+#define SST49LF004B	0x0060
+#define SST49LF008A	0x005a
+#define SST49LF030A	0x001C
+#define SST49LF040A	0x0051
+#define SST49LF080A	0x005B
+
+/* Toshiba */
+#define TC58FVT160	0x00C2
+#define TC58FVB160	0x0043
+#define TC58FVT321	0x009A
+#define TC58FVB321	0x009C
+#define TC58FVT641	0x0093
+#define TC58FVB641	0x0095
+
+/* Winbond */
+#define W49V002A	0x00b0
+
+
+/*
+ * Unlock address sets for AMD command sets.
+ * Intel command sets use the MTD_UADDR_UNNECESSARY.
+ * Each identifier, except MTD_UADDR_UNNECESSARY, and
+ * MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[].
+ * MTD_UADDR_NOT_SUPPORTED must be 0 so that structure
+ * initialization need not require initializing all of the
+ * unlock addresses for all bit widths.
+ */
+enum uaddr {
+	MTD_UADDR_NOT_SUPPORTED = 0,	/* data width not supported */
+	MTD_UADDR_0x0555_0x02AA,
+	MTD_UADDR_0x0555_0x0AAA,
+	MTD_UADDR_0x5555_0x2AAA,
+	MTD_UADDR_0x0AAA_0x0555,
+	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
+	MTD_UADDR_UNNECESSARY,		/* Does not require any address */
+};
+
+
+struct unlock_addr {
+	u32 addr1;
+	u32 addr2;
+};
+
+
+/*
+ * I don't like the fact that the first entry in unlock_addrs[]
+ * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
+ * should not be used.  The  problem is that structures with
+ * initializers have extra fields initialized to 0.  It is _very_
+ * desireable to have the unlock address entries for unsupported
+ * data widths automatically initialized - that means that
+ * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
+ * must go unused.
+ */
+static const struct unlock_addr  unlock_addrs[] = {
+	[MTD_UADDR_NOT_SUPPORTED] = {
+		.addr1 = 0xffff,
+		.addr2 = 0xffff
+	},
+
+	[MTD_UADDR_0x0555_0x02AA] = {
+		.addr1 = 0x0555,
+		.addr2 = 0x02aa
+	},
+
+	[MTD_UADDR_0x0555_0x0AAA] = {
+		.addr1 = 0x0555,
+		.addr2 = 0x0aaa
+	},
+
+	[MTD_UADDR_0x5555_0x2AAA] = {
+		.addr1 = 0x5555,
+		.addr2 = 0x2aaa
+	},
+
+	[MTD_UADDR_0x0AAA_0x0555] = {
+		.addr1 = 0x0AAA,
+		.addr2 = 0x0555
+	},
+
+	[MTD_UADDR_DONT_CARE] = {
+		.addr1 = 0x0000,      /* Doesn't matter which address */
+		.addr2 = 0x0000       /* is used - must be last entry */
+	},
+
+	[MTD_UADDR_UNNECESSARY] = {
+		.addr1 = 0x0000,
+		.addr2 = 0x0000
+	}
+};
+
+
+struct amd_flash_info {
+	const __u16 mfr_id;
+	const __u16 dev_id;
+	const char *name;
+	const int DevSize;
+	const int NumEraseRegions;
+	const int CmdSet;
+	const __u8 uaddr[4];		/* unlock addrs for 8, 16, 32, 64 */
+	const ulong regions[6];
+};
+
+#define ERASEINFO(size,blocks) (size<<8)|(blocks-1)
+
+#define SIZE_64KiB  16
+#define SIZE_128KiB 17
+#define SIZE_256KiB 18
+#define SIZE_512KiB 19
+#define SIZE_1MiB   20
+#define SIZE_2MiB   21
+#define SIZE_4MiB   22
+#define SIZE_8MiB   23
+
+
+/*
+ * Please keep this list ordered by manufacturer!
+ * Fortunately, the list isn't searched often and so a
+ * slow, linear search isn't so bad.
+ */
+static const struct amd_flash_info jedec_table[] = {
+	{
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F032B,
+		.name		= "AMD AM29F032B",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,64)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV160DT,
+		.name		= "AMD AM29LV160DT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA   /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,31),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV160DB,
+		.name		= "AMD AM29LV160DB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA   /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,31)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV400BB,
+		.name		= "AMD AM29LV400BB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,7)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV400BT,
+		.name		= "AMD AM29LV400BT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,7),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV800BB,
+		.name		= "AMD AM29LV800BB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
+	}, {
+/* add DL */
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29DL800BB,
+		.name		= "AMD AM29DL800BB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 6,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,4),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x10000,14)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29DL800BT,
+		.name		= "AMD AM29DL800BT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 6,
+		.regions	= {
+			ERASEINFO(0x10000,14),
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,4),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F800BB,
+		.name		= "AMD AM29F800BB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV800BT,
+		.name		= "AMD AM29LV800BT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F800BT,
+		.name		= "AMD AM29F800BT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F017D,
+		.name		= "AMD AM29F017D",
+		.uaddr		= {
+			[0] = MTD_UADDR_DONT_CARE     /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,32),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F016D,
+		.name		= "AMD AM29F016D",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,32),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F080,
+		.name		= "AMD AM29F080",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F040,
+		.name		= "AMD AM29F040",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29LV040B,
+		.name		= "AMD AM29LV040B",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29F002T,
+		.name		= "AMD AM29F002T",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,3),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ATMEL,
+		.dev_id		= AT49BV512,
+		.name		= "Atmel AT49BV512",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_64KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ATMEL,
+		.dev_id		= AT29LV512,
+		.name		= "Atmel AT29LV512",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_64KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x80,256),
+			ERASEINFO(0x80,256)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ATMEL,
+		.dev_id		= AT49BV16X,
+		.name		= "Atmel AT49BV16X",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x0AAA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x0AAA   /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000,8),
+			ERASEINFO(0x10000,31)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ATMEL,
+		.dev_id		= AT49BV16XT,
+		.name		= "Atmel AT49BV16XT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x0AAA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x0AAA   /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000,31),
+			ERASEINFO(0x02000,8)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ATMEL,
+		.dev_id		= AT49BV32X,
+		.name		= "Atmel AT49BV32X",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x0AAA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x0AAA   /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000,8),
+			ERASEINFO(0x10000,63)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ATMEL,
+		.dev_id		= AT49BV32XT,
+		.name		= "Atmel AT49BV32XT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x0AAA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x0AAA   /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000,63),
+			ERASEINFO(0x02000,8)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29F040C,
+		.name		= "Fujitsu MBM29F040C",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV650UE,
+		.name		= "Fujitsu MBM29LV650UE",
+		.uaddr		= {
+			[0] = MTD_UADDR_DONT_CARE     /* x16 */
+		},
+		.DevSize	= SIZE_8MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,128)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV320TE,
+		.name		= "Fujitsu MBM29LV320TE",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000,63),
+			ERASEINFO(0x02000,8)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV320BE,
+		.name		= "Fujitsu MBM29LV320BE",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000,8),
+			ERASEINFO(0x10000,63)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV160TE,
+		.name		= "Fujitsu MBM29LV160TE",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,31),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV160BE,
+		.name		= "Fujitsu MBM29LV160BE",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,31)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV800BA,
+		.name		= "Fujitsu MBM29LV800BA",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV800TA,
+		.name		= "Fujitsu MBM29LV800TA",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV400BC,
+		.name		= "Fujitsu MBM29LV400BC",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,7)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29LV400TC,
+		.name		= "Fujitsu MBM29LV400TC",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,7),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_HYUNDAI,
+		.dev_id		= HY29F002T,
+		.name		= "Hyundai HY29F002T",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,3),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F004B3B,
+		.name		= "Intel 28F004B3B",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 7),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F004B3T,
+		.name		= "Intel 28F004B3T",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 7),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F400B3B,
+		.name		= "Intel 28F400B3B",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 7),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F400B3T,
+		.name		= "Intel 28F400B3T",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 7),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F008B3B,
+		.name		= "Intel 28F008B3B",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 15),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F008B3T,
+		.name		= "Intel 28F008B3T",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 15),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F008S5,
+		.name		= "Intel 28F008S5",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F016S5,
+		.name		= "Intel 28F016S5",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,32),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F008SA,
+		.name		= "Intel 28F008SA",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000, 16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F800B3B,
+		.name		= "Intel 28F800B3B",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 15),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F800B3T,
+		.name		= "Intel 28F800B3T",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 15),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F016B3B,
+		.name		= "Intel 28F016B3B",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 31),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F016S3,
+		.name		= "Intel I28F016S3",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000, 32),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F016B3T,
+		.name		= "Intel 28F016B3T",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 31),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F160B3B,
+		.name		= "Intel 28F160B3B",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 31),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F160B3T,
+		.name		= "Intel 28F160B3T",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 31),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F320B3B,
+		.name		= "Intel 28F320B3B",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 63),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F320B3T,
+		.name		= "Intel 28F320B3T",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 63),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F640B3B,
+		.name		= "Intel 28F640B3B",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_8MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 127),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F640B3T,
+		.name		= "Intel 28F640B3T",
+		.uaddr		= {
+			[1] = MTD_UADDR_UNNECESSARY,    /* x16 */
+		},
+		.DevSize	= SIZE_8MiB,
+		.CmdSet		= P_ID_INTEL_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000, 127),
+			ERASEINFO(0x02000, 8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I82802AB,
+		.name		= "Intel 82802AB",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I82802AC,
+		.name		= "Intel 82802AC",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_MACRONIX,
+		.dev_id		= MX29LV040C,
+		.name		= "Macronix MX29LV040C",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA,  /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_MACRONIX,
+		.dev_id		= MX29LV160T,
+		.name		= "MXIC MX29LV160T",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,31),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_NEC,
+		.dev_id		= UPD29F064115,
+		.name		= "NEC uPD29F064115",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_8MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 3,
+		.regions	= {
+			ERASEINFO(0x2000,8),
+			ERASEINFO(0x10000,126),
+			ERASEINFO(0x2000,8),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_MACRONIX,
+		.dev_id		= MX29LV160B,
+		.name		= "MXIC MX29LV160B",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,31)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_MACRONIX,
+		.dev_id		= MX29F016,
+		.name		= "Macronix MX29F016",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,32),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_MACRONIX,
+		.dev_id		= MX29F004T,
+		.name		= "Macronix MX29F004T",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,7),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_MACRONIX,
+		.dev_id		= MX29F004B,
+		.name		= "Macronix MX29F004B",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,7),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_MACRONIX,
+		.dev_id		= MX29F002T,
+		.name		= "Macronix MX29F002T",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,3),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_PMC,
+		.dev_id		= PM49FL002,
+		.name		= "PMC Pm49FL002",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO( 0x01000, 64 )
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_PMC,
+		.dev_id		= PM49FL004,
+		.name		= "PMC Pm49FL004",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO( 0x01000, 128 )
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_PMC,
+		.dev_id		= PM49FL008,
+		.name		= "PMC Pm49FL008",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO( 0x01000, 256 )
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39LF512,
+		.name		= "SST 39LF512",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_64KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,16),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39LF010,
+		.name		= "SST 39LF010",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_128KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,32),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_SST,
+ 		.dev_id 	= SST29EE020,
+		.name		= "SST 29EE020",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+ 		.DevSize	= SIZE_256KiB,
+ 		.CmdSet		= P_ID_SST_PAGE,
+ 		.NumEraseRegions= 1,
+ 		.regions = {ERASEINFO(0x01000,64),
+ 		}
+         }, {
+ 		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST29LE020,
+ 		.name		= "SST 29LE020",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+ 		.DevSize	= SIZE_256KiB,
+ 		.CmdSet		= P_ID_SST_PAGE,
+ 		.NumEraseRegions= 1,
+ 		.regions = {ERASEINFO(0x01000,64),
+ 		}
+	}, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39LF020,
+		.name		= "SST 39LF020",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,64),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39LF040,
+		.name		= "SST 39LF040",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,128),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39SF010A,
+		.name		= "SST 39SF010A",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_128KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,32),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39SF020A,
+		.name		= "SST 39SF020A",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,64),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST49LF004B,
+		.name		= "SST 49LF004B",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,128),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST49LF008A,
+		.name		= "SST 49LF008A",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,256),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST49LF030A,
+		.name		= "SST 49LF030A",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,96),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST49LF040A,
+		.name		= "SST 49LF040A",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,128),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST49LF080A,
+		.name		= "SST 49LF080A",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x01000,256),
+		}
+	}, {
+               .mfr_id         = MANUFACTURER_SST,     /* should be CFI */
+               .dev_id         = SST39LF160,
+               .name           = "SST 39LF160",
+               .uaddr          = {
+                       [0] = MTD_UADDR_0x5555_0x2AAA,  /* x8 */
+                       [1] = MTD_UADDR_0x5555_0x2AAA   /* x16 */
+               },
+               .DevSize        = SIZE_2MiB,
+               .CmdSet         = P_ID_AMD_STD,
+               .NumEraseRegions= 2,
+               .regions        = {
+                       ERASEINFO(0x1000,256),
+                       ERASEINFO(0x1000,256)
+               }
+
+       }, {
+		.mfr_id		= MANUFACTURER_ST,	/* FIXME - CFI device? */
+		.dev_id		= M29W800DT,
+		.name		= "ST M29W800DT",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA,  /* x8 */
+			[1] = MTD_UADDR_0x5555_0x2AAA   /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ST,	/* FIXME - CFI device? */
+		.dev_id		= M29W800DB,
+		.name		= "ST M29W800DB",
+ 		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA,  /* x8 */
+			[1] = MTD_UADDR_0x5555_0x2AAA   /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ST,	/* FIXME - CFI device? */
+		.dev_id		= M29W160DT,
+		.name		= "ST M29W160DT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,31),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ST,	/* FIXME - CFI device? */
+		.dev_id		= M29W160DB,
+		.name		= "ST M29W160DB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,31)
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M29W040B,
+		.name		= "ST M29W040B",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FW040,
+		.name		= "ST M50FW040",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_512KiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,8),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FW080,
+		.name		= "ST M50FW080",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,16),
+		}
+        }, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FW016,
+		.name		= "ST M50FW016",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,32),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50LPW080,
+		.name		= "ST M50LPW080",
+		.uaddr		= {
+			[0] = MTD_UADDR_UNNECESSARY,    /* x8 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_INTEL_EXT,
+		.NumEraseRegions= 1,
+		.regions	= {
+			ERASEINFO(0x10000,16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_TOSHIBA,
+		.dev_id		= TC58FVT160,
+		.name		= "Toshiba TC58FVT160",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000,31),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_TOSHIBA,
+		.dev_id		= TC58FVB160,
+		.name		= "Toshiba TC58FVB160",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA  /* x16 */
+		},
+		.DevSize	= SIZE_2MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,31)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_TOSHIBA,
+		.dev_id		= TC58FVB321,
+		.name		= "Toshiba TC58FVB321",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA  /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000,8),
+			ERASEINFO(0x10000,63)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_TOSHIBA,
+		.dev_id		= TC58FVT321,
+		.name		= "Toshiba TC58FVT321",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA  /* x16 */
+		},
+		.DevSize	= SIZE_4MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000,63),
+			ERASEINFO(0x02000,8)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_TOSHIBA,
+		.dev_id		= TC58FVB641,
+		.name		= "Toshiba TC58FVB641",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
+		},
+		.DevSize	= SIZE_8MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x02000,8),
+			ERASEINFO(0x10000,127)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_TOSHIBA,
+		.dev_id		= TC58FVT641,
+		.name		= "Toshiba TC58FVT641",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
+		},
+		.DevSize	= SIZE_8MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 2,
+		.regions	= {
+			ERASEINFO(0x10000,127),
+			ERASEINFO(0x02000,8)
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_WINBOND,
+		.dev_id		= W49V002A,
+		.name		= "Winbond W49V002A",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
+		},
+		.DevSize	= SIZE_256KiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000, 3),
+			ERASEINFO(0x08000, 1),
+			ERASEINFO(0x02000, 2),
+			ERASEINFO(0x04000, 1),
+		}
+	}
+};
+
+
+static int cfi_jedec_setup(struct cfi_private *p_cfi, int index);
+
+static int jedec_probe_chip(struct map_info *map, __u32 base,
+			    unsigned long *chip_map, struct cfi_private *cfi);
+
+static struct mtd_info *jedec_probe(struct map_info *map);
+
+static inline u32 jedec_read_mfr(struct map_info *map, __u32 base, 
+	struct cfi_private *cfi)
+{
+	map_word result;
+	unsigned long mask;
+	u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type);
+	mask = (1 << (cfi->device_type * 8)) -1;
+	result = map_read(map, base + ofs);
+	return result.x[0] & mask;
+}
+
+static inline u32 jedec_read_id(struct map_info *map, __u32 base, 
+	struct cfi_private *cfi)
+{
+	map_word result;
+	unsigned long mask;
+	u32 ofs = cfi_build_cmd_addr(1, cfi_interleave(cfi), cfi->device_type);
+	mask = (1 << (cfi->device_type * 8)) -1;
+	result = map_read(map, base + ofs);
+	return result.x[0] & mask;
+}
+
+static inline void jedec_reset(u32 base, struct map_info *map, 
+	struct cfi_private *cfi)
+{
+	/* Reset */
+
+	/* after checking the datasheets for SST, MACRONIX and ATMEL
+	 * (oh and incidentaly the jedec spec - 3.5.3.3) the reset
+	 * sequence is *supposed* to be 0xaa at 0x5555, 0x55 at
+	 * 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips
+	 * as they will ignore the writes and dont care what address
+	 * the F0 is written to */
+	if(cfi->addr_unlock1) {
+		DEBUG( MTD_DEBUG_LEVEL3,
+		       "reset unlock called %x %x \n",
+		       cfi->addr_unlock1,cfi->addr_unlock2);
+		cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
+		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
+	}
+
+	cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
+	/* Some misdesigned intel chips do not respond for 0xF0 for a reset,
+	 * so ensure we're in read mode.  Send both the Intel and the AMD command
+	 * for this.  Intel uses 0xff for this, AMD uses 0xff for NOP, so
+	 * this should be safe.
+	 */ 
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	/* FIXME - should have reset delay before continuing */
+}
+
+
+static inline __u8 finfo_uaddr(const struct amd_flash_info *finfo, int device_type)
+{
+	int uaddr_idx;
+	__u8 uaddr = MTD_UADDR_NOT_SUPPORTED;
+
+	switch ( device_type ) {
+	case CFI_DEVICETYPE_X8:  uaddr_idx = 0; break;
+	case CFI_DEVICETYPE_X16: uaddr_idx = 1; break;
+	case CFI_DEVICETYPE_X32: uaddr_idx = 2; break;
+	default:
+		printk(KERN_NOTICE "MTD: %s(): unknown device_type %d\n",
+		       __func__, device_type);
+		goto uaddr_done;
+	}
+
+	uaddr = finfo->uaddr[uaddr_idx];
+
+	if (uaddr != MTD_UADDR_NOT_SUPPORTED ) {
+		/* ASSERT("The unlock addresses for non-8-bit mode
+		   are bollocks. We don't really need an array."); */
+		uaddr = finfo->uaddr[0];
+	}
+
+ uaddr_done:
+	return uaddr;
+}
+
+
+static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
+{
+	int i,num_erase_regions;
+	__u8 uaddr;
+
+	printk("Found: %s\n",jedec_table[index].name);
+
+	num_erase_regions = jedec_table[index].NumEraseRegions;
+	
+	p_cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
+	if (!p_cfi->cfiq) {
+		//xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
+		return 0;
+	}
+
+	memset(p_cfi->cfiq,0,sizeof(struct cfi_ident));	
+
+	p_cfi->cfiq->P_ID = jedec_table[index].CmdSet;
+	p_cfi->cfiq->NumEraseRegions = jedec_table[index].NumEraseRegions;
+	p_cfi->cfiq->DevSize = jedec_table[index].DevSize;
+	p_cfi->cfi_mode = CFI_MODE_JEDEC;
+
+	for (i=0; i<num_erase_regions; i++){
+		p_cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
+	}
+	p_cfi->cmdset_priv = NULL;
+
+	/* This may be redundant for some cases, but it doesn't hurt */
+	p_cfi->mfr = jedec_table[index].mfr_id;
+	p_cfi->id = jedec_table[index].dev_id;
+
+	uaddr = finfo_uaddr(&jedec_table[index], p_cfi->device_type);
+	if ( uaddr == MTD_UADDR_NOT_SUPPORTED ) {
+		kfree( p_cfi->cfiq );
+		return 0;
+	}
+
+	p_cfi->addr_unlock1 = unlock_addrs[uaddr].addr1;
+	p_cfi->addr_unlock2 = unlock_addrs[uaddr].addr2;
+
+	return 1; 	/* ok */
+}
+
+
+/*
+ * There is a BIG problem properly ID'ing the JEDEC devic and guaranteeing
+ * the mapped address, unlock addresses, and proper chip ID.  This function
+ * attempts to minimize errors.  It is doubtfull that this probe will ever
+ * be perfect - consequently there should be some module parameters that
+ * could be manually specified to force the chip info.
+ */
+static inline int jedec_match( __u32 base,
+			       struct map_info *map,
+			       struct cfi_private *cfi,
+			       const struct amd_flash_info *finfo )
+{
+	int rc = 0;           /* failure until all tests pass */
+	u32 mfr, id;
+	__u8 uaddr;
+
+	/*
+	 * The IDs must match.  For X16 and X32 devices operating in
+	 * a lower width ( X8 or X16 ), the device ID's are usually just
+	 * the lower byte(s) of the larger device ID for wider mode.  If
+	 * a part is found that doesn't fit this assumption (device id for
+	 * smaller width mode is completely unrealated to full-width mode)
+	 * then the jedec_table[] will have to be augmented with the IDs
+	 * for different widths.
+	 */
+	switch (cfi->device_type) {
+	case CFI_DEVICETYPE_X8:
+		mfr = (__u8)finfo->mfr_id;
+		id = (__u8)finfo->dev_id;
+		break;
+	case CFI_DEVICETYPE_X16:
+		mfr = (__u16)finfo->mfr_id;
+		id = (__u16)finfo->dev_id;
+		break;
+	case CFI_DEVICETYPE_X32:
+		mfr = (__u16)finfo->mfr_id;
+		id = (__u32)finfo->dev_id;
+		break;
+	default:
+		printk(KERN_WARNING
+		       "MTD %s(): Unsupported device type %d\n",
+		       __func__, cfi->device_type);
+		goto match_done;
+	}
+	if ( cfi->mfr != mfr || cfi->id != id ) {
+		goto match_done;
+	}
+
+	/* the part size must fit in the memory window */
+	DEBUG( MTD_DEBUG_LEVEL3,
+	       "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+	       __func__, base, 1 << finfo->DevSize, base + (1 << finfo->DevSize) );
+	if ( base + cfi_interleave(cfi) * ( 1 << finfo->DevSize ) > map->size ) {
+		DEBUG( MTD_DEBUG_LEVEL3,
+		       "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+		       __func__, finfo->mfr_id, finfo->dev_id,
+		       1 << finfo->DevSize );
+		goto match_done;
+	}
+
+	uaddr = finfo_uaddr(finfo, cfi->device_type);
+	if ( uaddr == MTD_UADDR_NOT_SUPPORTED ) {
+		goto match_done;
+	}
+
+	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+	       __func__, cfi->addr_unlock1, cfi->addr_unlock2 );
+	if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
+	     && ( unlock_addrs[uaddr].addr1 != cfi->addr_unlock1 ||
+		  unlock_addrs[uaddr].addr2 != cfi->addr_unlock2 ) ) {
+		DEBUG( MTD_DEBUG_LEVEL3,
+			"MTD %s(): 0x%.4x 0x%.4x did not match\n",
+			__func__,
+			unlock_addrs[uaddr].addr1,
+			unlock_addrs[uaddr].addr2);
+		goto match_done;
+	}
+
+	/*
+	 * Make sure the ID's dissappear when the device is taken out of
+	 * ID mode.  The only time this should fail when it should succeed
+	 * is when the ID's are written as data to the same
+	 * addresses.  For this rare and unfortunate case the chip
+	 * cannot be probed correctly.
+	 * FIXME - write a driver that takes all of the chip info as
+	 * module parameters, doesn't probe but forces a load.
+	 */
+	DEBUG( MTD_DEBUG_LEVEL3,
+	       "MTD %s(): check ID's disappear when not in ID mode\n",
+	       __func__ );
+	jedec_reset( base, map, cfi );
+	mfr = jedec_read_mfr( map, base, cfi );
+	id = jedec_read_id( map, base, cfi );
+	if ( mfr == cfi->mfr && id == cfi->id ) {
+		DEBUG( MTD_DEBUG_LEVEL3,
+		       "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+		       "You might need to manually specify JEDEC parameters.\n",
+			__func__, cfi->mfr, cfi->id );
+		goto match_done;
+	}
+
+	/* all tests passed - mark  as success */
+	rc = 1;
+
+	/*
+	 * Put the device back in ID mode - only need to do this if we
+	 * were truly frobbing a real device.
+	 */
+	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+	if(cfi->addr_unlock1) {
+		cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
+		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
+	}
+	cfi_send_gen_cmd(0x90, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
+	/* FIXME - should have a delay before continuing */
+
+ match_done:	
+	return rc;
+}
+
+
+static int jedec_probe_chip(struct map_info *map, __u32 base,
+			    unsigned long *chip_map, struct cfi_private *cfi)
+{
+	int i;
+	enum uaddr uaddr_idx = MTD_UADDR_NOT_SUPPORTED;
+	u32 probe_offset1, probe_offset2;
+
+ retry:
+	if (!cfi->numchips) {
+		uaddr_idx++;
+
+		if (MTD_UADDR_UNNECESSARY == uaddr_idx)
+			return 0;
+
+		cfi->addr_unlock1 = unlock_addrs[uaddr_idx].addr1;
+		cfi->addr_unlock2 = unlock_addrs[uaddr_idx].addr2;
+	}
+
+	/* Make certain we aren't probing past the end of map */
+	if (base >= map->size) {
+		printk(KERN_NOTICE
+			"Probe at base(0x%08x) past the end of the map(0x%08lx)\n",
+			base, map->size -1);
+		return 0;
+		
+	}
+	/* Ensure the unlock addresses we try stay inside the map */
+	probe_offset1 = cfi_build_cmd_addr(
+		cfi->addr_unlock1, 
+		cfi_interleave(cfi), 
+		cfi->device_type);
+	probe_offset2 = cfi_build_cmd_addr(
+		cfi->addr_unlock1, 
+		cfi_interleave(cfi), 
+		cfi->device_type);
+	if (	((base + probe_offset1 + map_bankwidth(map)) >= map->size) ||
+		((base + probe_offset2 + map_bankwidth(map)) >= map->size))
+	{
+		goto retry;
+	}
+		
+	/* Reset */
+	jedec_reset(base, map, cfi);
+
+	/* Autoselect Mode */
+	if(cfi->addr_unlock1) {
+		cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
+		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
+	}
+	cfi_send_gen_cmd(0x90, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
+	/* FIXME - should have a delay before continuing */
+
+	if (!cfi->numchips) {
+		/* This is the first time we're called. Set up the CFI 
+		   stuff accordingly and return */
+		
+		cfi->mfr = jedec_read_mfr(map, base, cfi);
+		cfi->id = jedec_read_id(map, base, cfi);
+		DEBUG(MTD_DEBUG_LEVEL3,
+		      "Search for id:(%02x %02x) interleave(%d) type(%d)\n", 
+			cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
+		for (i=0; i<sizeof(jedec_table)/sizeof(jedec_table[0]); i++) {
+			if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
+				DEBUG( MTD_DEBUG_LEVEL3,
+				       "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+				       __func__, cfi->mfr, cfi->id,
+				       cfi->addr_unlock1, cfi->addr_unlock2 );
+				if (!cfi_jedec_setup(cfi, i))
+					return 0;
+				goto ok_out;
+			}
+		}
+		goto retry;
+	} else {
+		__u16 mfr;
+		__u16 id;
+
+		/* Make sure it is a chip of the same manufacturer and id */
+		mfr = jedec_read_mfr(map, base, cfi);
+		id = jedec_read_id(map, base, cfi);
+
+		if ((mfr != cfi->mfr) || (id != cfi->id)) {
+			printk(KERN_DEBUG "%s: Found different chip or no chip at all (mfr 0x%x, id 0x%x) at 0x%x\n",
+			       map->name, mfr, id, base);
+			jedec_reset(base, map, cfi);
+			return 0;
+		}
+	}
+	
+	/* Check each previous chip locations to see if it's an alias */
+	for (i=0; i < (base >> cfi->chipshift); i++) {
+		unsigned long start;
+		if(!test_bit(i, chip_map)) {
+			continue; /* Skip location; no valid chip at this address */
+		}
+		start = i << cfi->chipshift;
+		if (jedec_read_mfr(map, start, cfi) == cfi->mfr &&
+		    jedec_read_id(map, start, cfi) == cfi->id) {
+			/* Eep. This chip also looks like it's in autoselect mode.
+			   Is it an alias for the new one? */
+			jedec_reset(start, map, cfi);
+
+			/* If the device IDs go away, it's an alias */
+			if (jedec_read_mfr(map, base, cfi) != cfi->mfr ||
+			    jedec_read_id(map, base, cfi) != cfi->id) {
+				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
+				       map->name, base, start);
+				return 0;
+			}
+			
+			/* Yes, it's actually got the device IDs as data. Most
+			 * unfortunate. Stick the new chip in read mode
+			 * too and if it's the same, assume it's an alias. */
+			/* FIXME: Use other modes to do a proper check */
+			jedec_reset(base, map, cfi);
+			if (jedec_read_mfr(map, base, cfi) == cfi->mfr &&
+			    jedec_read_id(map, base, cfi) == cfi->id) {
+				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
+				       map->name, base, start);
+				return 0;
+			}
+		}
+	}
+		
+	/* OK, if we got to here, then none of the previous chips appear to
+	   be aliases for the current one. */
+	set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
+	cfi->numchips++;
+		
+ok_out:
+	/* Put it back into Read Mode */
+	jedec_reset(base, map, cfi);
+
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	       map->name, cfi_interleave(cfi), cfi->device_type*8, base, 
+	       map->bankwidth*8);
+	
+	return 1;
+}
+
+static struct chip_probe jedec_chip_probe = {
+	.name = "JEDEC",
+	.probe_chip = jedec_probe_chip
+};
+
+static struct mtd_info *jedec_probe(struct map_info *map)
+{
+	/*
+	 * Just use the generic probe stuff to call our CFI-specific
+	 * chip_probe routine in all the possible permutations, etc.
+	 */
+	return mtd_do_chip_probe(map, &jedec_chip_probe);
+}
+
+static struct mtd_chip_driver jedec_chipdrv = {
+	.probe	= jedec_probe,
+	.name	= "jedec_probe",
+	.module	= THIS_MODULE
+};
+
+static int __init jedec_probe_init(void)
+{
+	register_mtd_chip_driver(&jedec_chipdrv);
+	return 0;
+}
+
+static void __exit jedec_probe_exit(void)
+{
+	unregister_mtd_chip_driver(&jedec_chipdrv);
+}
+
+module_init(jedec_probe_init);
+module_exit(jedec_probe_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Erwin Authried <eauth@softsys.co.at> et al.");
+MODULE_DESCRIPTION("Probe code for JEDEC-compliant flash chips");
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
new file mode 100644
index 000000000000..c6c83833cc32
--- /dev/null
+++ b/drivers/mtd/chips/map_absent.c
@@ -0,0 +1,117 @@
+/*
+ * Common code to handle absent "placeholder" devices
+ * Copyright 2001 Resilience Corporation <ebrower@resilience.com>
+ * $Id: map_absent.c,v 1.5 2004/11/16 18:29:00 dwmw2 Exp $
+ *
+ * This map driver is used to allocate "placeholder" MTD
+ * devices on systems that have socketed/removable media. 
+ * Use of this driver as a fallback preserves the expected 
+ * registration of MTD device nodes regardless of probe outcome.
+ * A usage example is as follows:
+ *
+ *		my_dev[i] = do_map_probe("cfi", &my_map[i]);
+ *		if(NULL == my_dev[i]) {
+ *			my_dev[i] = do_map_probe("map_absent", &my_map[i]);
+ *		}
+ *
+ * Any device 'probed' with this driver will return -ENODEV
+ * upon open.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/compatmac.h>
+
+static int map_absent_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int map_absent_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int map_absent_erase (struct mtd_info *, struct erase_info *);
+static void map_absent_sync (struct mtd_info *);
+static struct mtd_info *map_absent_probe(struct map_info *map);
+static void map_absent_destroy (struct mtd_info *);
+
+
+static struct mtd_chip_driver map_absent_chipdrv = {
+	.probe		= map_absent_probe,
+	.destroy	= map_absent_destroy,
+	.name		= "map_absent",
+	.module		= THIS_MODULE
+};
+
+static struct mtd_info *map_absent_probe(struct map_info *map)
+{
+	struct mtd_info *mtd;
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if (!mtd) {
+		return NULL;
+	}
+
+	memset(mtd, 0, sizeof(*mtd));
+
+	map->fldrv 	= &map_absent_chipdrv;
+	mtd->priv 	= map;
+	mtd->name 	= map->name;
+	mtd->type 	= MTD_ABSENT;
+	mtd->size 	= map->size;
+	mtd->erase 	= map_absent_erase;
+	mtd->read 	= map_absent_read;
+	mtd->write 	= map_absent_write;
+	mtd->sync 	= map_absent_sync;
+	mtd->flags 	= 0;
+	mtd->erasesize = PAGE_SIZE;
+
+	__module_get(THIS_MODULE);
+	return mtd;
+}
+
+
+static int map_absent_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	*retlen = 0;
+	return -ENODEV;
+}
+
+static int map_absent_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+{
+	*retlen = 0;
+	return -ENODEV; 
+}
+
+static int map_absent_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	return -ENODEV;
+}
+
+static void map_absent_sync(struct mtd_info *mtd)
+{
+	/* nop */
+}
+
+static void map_absent_destroy(struct mtd_info *mtd)
+{
+	/* nop */
+}
+
+static int __init map_absent_init(void)
+{
+	register_mtd_chip_driver(&map_absent_chipdrv);
+	return 0;
+}
+
+static void __exit map_absent_exit(void)
+{
+	unregister_mtd_chip_driver(&map_absent_chipdrv);
+}
+
+module_init(map_absent_init);
+module_exit(map_absent_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Resilience Corporation - Eric Brower <ebrower@resilience.com>");
+MODULE_DESCRIPTION("Placeholder MTD chip driver for 'absent' chips");
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
new file mode 100644
index 000000000000..bd2e876a814b
--- /dev/null
+++ b/drivers/mtd/chips/map_ram.c
@@ -0,0 +1,143 @@
+/*
+ * Common code to handle map devices which are simple RAM
+ * (C) 2000 Red Hat. GPL'd.
+ * $Id: map_ram.c,v 1.22 2005/01/05 18:05:12 dwmw2 Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/compatmac.h>
+
+
+static int mapram_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int mapram_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static int mapram_erase (struct mtd_info *, struct erase_info *);
+static void mapram_nop (struct mtd_info *);
+static struct mtd_info *map_ram_probe(struct map_info *map);
+
+
+static struct mtd_chip_driver mapram_chipdrv = {
+	.probe	= map_ram_probe,
+	.name	= "map_ram",
+	.module	= THIS_MODULE
+};
+
+static struct mtd_info *map_ram_probe(struct map_info *map)
+{
+	struct mtd_info *mtd;
+
+	/* Check the first byte is RAM */
+#if 0
+	map_write8(map, 0x55, 0);
+	if (map_read8(map, 0) != 0x55)
+		return NULL;
+
+	map_write8(map, 0xAA, 0);
+	if (map_read8(map, 0) != 0xAA)
+		return NULL;
+
+	/* Check the last byte is RAM */
+	map_write8(map, 0x55, map->size-1);
+	if (map_read8(map, map->size-1) != 0x55)
+		return NULL;
+
+	map_write8(map, 0xAA, map->size-1);
+	if (map_read8(map, map->size-1) != 0xAA)
+		return NULL;
+#endif
+	/* OK. It seems to be RAM. */
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if (!mtd)
+		return NULL;
+
+	memset(mtd, 0, sizeof(*mtd));
+
+	map->fldrv = &mapram_chipdrv;
+	mtd->priv = map;
+	mtd->name = map->name;
+	mtd->type = MTD_RAM;
+	mtd->size = map->size;
+	mtd->erase = mapram_erase;
+	mtd->read = mapram_read;
+	mtd->write = mapram_write;
+	mtd->sync = mapram_nop;
+	mtd->flags = MTD_CAP_RAM | MTD_VOLATILE;
+
+	mtd->erasesize = PAGE_SIZE;
+ 	while(mtd->size & (mtd->erasesize - 1))
+		mtd->erasesize >>= 1;
+
+	__module_get(THIS_MODULE);
+	return mtd;
+}
+
+
+static int mapram_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+
+	map_copy_from(map, buf, from, len);
+	*retlen = len;
+	return 0;
+}
+
+static int mapram_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+
+	map_copy_to(map, to, buf, len);
+	*retlen = len;
+	return 0;
+}
+
+static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+	/* Yeah, it's inefficient. Who cares? It's faster than a _real_
+	   flash erase. */
+	struct map_info *map = mtd->priv;
+	map_word allff;
+	unsigned long i;
+
+	allff = map_word_ff(map);
+
+	for (i=0; i<instr->len; i += map_bankwidth(map))
+		map_write(map, allff, instr->addr + i);
+
+	instr->state = MTD_ERASE_DONE;
+
+	mtd_erase_callback(instr);
+
+	return 0;
+}
+
+static void mapram_nop(struct mtd_info *mtd)
+{
+	/* Nothing to see here */
+}
+
+static int __init map_ram_init(void)
+{
+	register_mtd_chip_driver(&mapram_chipdrv);
+	return 0;
+}
+
+static void __exit map_ram_exit(void)
+{
+	unregister_mtd_chip_driver(&mapram_chipdrv);
+}
+
+module_init(map_ram_init);
+module_exit(map_ram_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("MTD chip driver for RAM chips");
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
new file mode 100644
index 000000000000..624c12c232c8
--- /dev/null
+++ b/drivers/mtd/chips/map_rom.c
@@ -0,0 +1,94 @@
+/*
+ * Common code to handle map devices which are simple ROM
+ * (C) 2000 Red Hat. GPL'd.
+ * $Id: map_rom.c,v 1.23 2005/01/05 18:05:12 dwmw2 Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/compatmac.h>
+
+static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+static void maprom_nop (struct mtd_info *);
+static struct mtd_info *map_rom_probe(struct map_info *map);
+
+static struct mtd_chip_driver maprom_chipdrv = {
+	.probe	= map_rom_probe,
+	.name	= "map_rom",
+	.module	= THIS_MODULE
+};
+
+static struct mtd_info *map_rom_probe(struct map_info *map)
+{
+	struct mtd_info *mtd;
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if (!mtd)
+		return NULL;
+
+	memset(mtd, 0, sizeof(*mtd));
+
+	map->fldrv = &maprom_chipdrv;
+	mtd->priv = map;
+	mtd->name = map->name;
+	mtd->type = MTD_ROM;
+	mtd->size = map->size;
+	mtd->read = maprom_read;
+	mtd->write = maprom_write;
+	mtd->sync = maprom_nop;
+	mtd->flags = MTD_CAP_ROM;
+	mtd->erasesize = 131072;
+ 	while(mtd->size & (mtd->erasesize - 1))
+		mtd->erasesize >>= 1;
+
+	__module_get(THIS_MODULE);
+	return mtd;
+}
+
+
+static int maprom_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+
+	map_copy_from(map, buf, from, len);
+	*retlen = len;
+	return 0;
+}
+
+static void maprom_nop(struct mtd_info *mtd)
+{
+	/* Nothing to see here */
+}
+
+static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+{
+	printk(KERN_NOTICE "maprom_write called\n");
+	return -EIO;
+}
+
+static int __init map_rom_init(void)
+{
+	register_mtd_chip_driver(&maprom_chipdrv);
+	return 0;
+}
+
+static void __exit map_rom_exit(void)
+{
+	unregister_mtd_chip_driver(&maprom_chipdrv);
+}
+
+module_init(map_rom_init);
+module_exit(map_rom_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("MTD chip driver for ROM chips");
diff --git a/drivers/mtd/chips/sharp.c b/drivers/mtd/chips/sharp.c
new file mode 100644
index 000000000000..c3cf0f63bc93
--- /dev/null
+++ b/drivers/mtd/chips/sharp.c
@@ -0,0 +1,596 @@
+/*
+ * MTD chip driver for pre-CFI Sharp flash chips
+ *
+ * Copyright 2000,2001 David A. Schleef <ds@schleef.org>
+ *           2000,2001 Lineo, Inc.
+ *
+ * $Id: sharp.c,v 1.14 2004/08/09 13:19:43 dwmw2 Exp $
+ *
+ * Devices supported:
+ *   LH28F016SCT Symmetrical block flash memory, 2Mx8
+ *   LH28F008SCT Symmetrical block flash memory, 1Mx8
+ *
+ * Documentation:
+ *   http://www.sharpmeg.com/datasheets/memic/flashcmp/
+ *   http://www.sharpmeg.com/datasheets/memic/flashcmp/01symf/16m/016sctl9.pdf
+ *   016sctl9.pdf
+ *
+ * Limitations:
+ *   This driver only supports 4x1 arrangement of chips.
+ *   Not tested on anything but PowerPC.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/cfi.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#define CMD_RESET		0xffffffff
+#define CMD_READ_ID		0x90909090
+#define CMD_READ_STATUS		0x70707070
+#define CMD_CLEAR_STATUS	0x50505050
+#define CMD_BLOCK_ERASE_1	0x20202020
+#define CMD_BLOCK_ERASE_2	0xd0d0d0d0
+#define CMD_BYTE_WRITE		0x40404040
+#define CMD_SUSPEND		0xb0b0b0b0
+#define CMD_RESUME		0xd0d0d0d0
+#define CMD_SET_BLOCK_LOCK_1	0x60606060
+#define CMD_SET_BLOCK_LOCK_2	0x01010101
+#define CMD_SET_MASTER_LOCK_1	0x60606060
+#define CMD_SET_MASTER_LOCK_2	0xf1f1f1f1
+#define CMD_CLEAR_BLOCK_LOCKS_1	0x60606060
+#define CMD_CLEAR_BLOCK_LOCKS_2	0xd0d0d0d0
+
+#define SR_READY		0x80808080 // 1 = ready
+#define SR_ERASE_SUSPEND	0x40404040 // 1 = block erase suspended
+#define SR_ERROR_ERASE		0x20202020 // 1 = error in block erase or clear lock bits
+#define SR_ERROR_WRITE		0x10101010 // 1 = error in byte write or set lock bit
+#define	SR_VPP			0x08080808 // 1 = Vpp is low
+#define SR_WRITE_SUSPEND	0x04040404 // 1 = byte write suspended
+#define SR_PROTECT		0x02020202 // 1 = lock bit set
+#define SR_RESERVED		0x01010101
+
+#define SR_ERRORS (SR_ERROR_ERASE|SR_ERROR_WRITE|SR_VPP|SR_PROTECT)
+
+/* Configuration options */
+
+#undef AUTOUNLOCK  /* automatically unlocks blocks before erasing */
+
+struct mtd_info *sharp_probe(struct map_info *);
+
+static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd);
+
+static int sharp_read(struct mtd_info *mtd, loff_t from, size_t len,
+	size_t *retlen, u_char *buf);
+static int sharp_write(struct mtd_info *mtd, loff_t from, size_t len,
+	size_t *retlen, const u_char *buf);
+static int sharp_erase(struct mtd_info *mtd, struct erase_info *instr);
+static void sharp_sync(struct mtd_info *mtd);
+static int sharp_suspend(struct mtd_info *mtd);
+static void sharp_resume(struct mtd_info *mtd);
+static void sharp_destroy(struct mtd_info *mtd);
+
+static int sharp_write_oneword(struct map_info *map, struct flchip *chip,
+	unsigned long adr, __u32 datum);
+static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
+	unsigned long adr);
+#ifdef AUTOUNLOCK
+static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
+	unsigned long adr);
+#endif
+
+
+struct sharp_info{
+	struct flchip *chip;
+	int bogus;
+	int chipshift;
+	int numchips;
+	struct flchip chips[1];
+};
+
+struct mtd_info *sharp_probe(struct map_info *map);
+static void sharp_destroy(struct mtd_info *mtd);
+
+static struct mtd_chip_driver sharp_chipdrv = {
+	.probe		= sharp_probe,
+	.destroy	= sharp_destroy,
+	.name		= "sharp",
+	.module		= THIS_MODULE
+};
+
+
+struct mtd_info *sharp_probe(struct map_info *map)
+{
+	struct mtd_info *mtd = NULL;
+	struct sharp_info *sharp = NULL;
+	int width;
+
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if(!mtd)
+		return NULL;
+
+	sharp = kmalloc(sizeof(*sharp), GFP_KERNEL);
+	if(!sharp) {
+		kfree(mtd);
+		return NULL;
+	}
+
+	memset(mtd, 0, sizeof(*mtd));
+
+	width = sharp_probe_map(map,mtd);
+	if(!width){
+		kfree(mtd);
+		kfree(sharp);
+		return NULL;
+	}
+
+	mtd->priv = map;
+	mtd->type = MTD_NORFLASH;
+	mtd->erase = sharp_erase;
+	mtd->read = sharp_read;
+	mtd->write = sharp_write;
+	mtd->sync = sharp_sync;
+	mtd->suspend = sharp_suspend;
+	mtd->resume = sharp_resume;
+	mtd->flags = MTD_CAP_NORFLASH;
+	mtd->name = map->name;
+
+	memset(sharp, 0, sizeof(*sharp));
+	sharp->chipshift = 23;
+	sharp->numchips = 1;
+	sharp->chips[0].start = 0;
+	sharp->chips[0].state = FL_READY;
+	sharp->chips[0].mutex = &sharp->chips[0]._spinlock;
+	sharp->chips[0].word_write_time = 0;
+	init_waitqueue_head(&sharp->chips[0].wq);
+	spin_lock_init(&sharp->chips[0]._spinlock);
+
+	map->fldrv = &sharp_chipdrv;
+	map->fldrv_priv = sharp;
+
+	__module_get(THIS_MODULE);
+	return mtd;
+}
+
+static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
+{
+	unsigned long tmp;
+	unsigned long base = 0;
+	u32 read0, read4;
+	int width = 4;
+
+	tmp = map_read32(map, base+0);
+
+	map_write32(map, CMD_READ_ID, base+0);
+
+	read0=map_read32(map, base+0);
+	read4=map_read32(map, base+4);
+	if(read0 == 0x89898989){
+		printk("Looks like sharp flash\n");
+		switch(read4){
+		case 0xaaaaaaaa:
+		case 0xa0a0a0a0:
+			/* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/
+			/* a0 - LH28F016SCT-Z4  2Mx8, 32 64k blocks*/
+			mtd->erasesize = 0x10000 * width;
+			mtd->size = 0x200000 * width;
+			return width;
+		case 0xa6a6a6a6:
+			/* a6 - LH28F008SCT-L12 1Mx8, 16 64k blocks*/
+			/* a6 - LH28F008SCR-L85 1Mx8, 16 64k blocks*/
+			mtd->erasesize = 0x10000 * width;
+			mtd->size = 0x100000 * width;
+			return width;
+#if 0
+		case 0x00000000: /* unknown */
+			/* XX - LH28F004SCT 512kx8, 8 64k blocks*/
+			mtd->erasesize = 0x10000 * width;
+			mtd->size = 0x80000 * width;
+			return width;
+#endif
+		default:
+			printk("Sort-of looks like sharp flash, 0x%08x 0x%08x\n",
+				read0,read4);
+		}
+	}else if((map_read32(map, base+0) == CMD_READ_ID)){
+		/* RAM, probably */
+		printk("Looks like RAM\n");
+		map_write32(map, tmp, base+0);
+	}else{
+		printk("Doesn't look like sharp flash, 0x%08x 0x%08x\n",
+			read0,read4);
+	}
+
+	return 0;
+}
+
+/* This function returns with the chip->mutex lock held. */
+static int sharp_wait(struct map_info *map, struct flchip *chip)
+{
+	__u16 status;
+	unsigned long timeo = jiffies + HZ;
+	DECLARE_WAITQUEUE(wait, current);
+	int adr = 0;
+
+retry:
+	spin_lock_bh(chip->mutex);
+
+	switch(chip->state){
+	case FL_READY:
+		map_write32(map,CMD_READ_STATUS,adr);
+		chip->state = FL_STATUS;
+	case FL_STATUS:
+		status = map_read32(map,adr);
+//printk("status=%08x\n",status);
+
+		udelay(100);
+		if((status & SR_READY)!=SR_READY){
+//printk(".status=%08x\n",status);
+			udelay(100);
+		}
+		break;
+	default:
+		printk("Waiting for chip\n");
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+
+		spin_unlock_bh(chip->mutex);
+
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+
+		if(signal_pending(current))
+			return -EINTR;
+
+		timeo = jiffies + HZ;
+
+		goto retry;
+	}
+
+	map_write32(map,CMD_RESET, adr);
+
+	chip->state = FL_READY;
+
+	return 0;
+}
+
+static void sharp_release(struct flchip *chip)
+{
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+}
+
+static int sharp_read(struct mtd_info *mtd, loff_t from, size_t len,
+	size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct sharp_info *sharp = map->fldrv_priv;
+	int chipnum;
+	int ret = 0;
+	int ofs = 0;
+
+	chipnum = (from >> sharp->chipshift);
+	ofs = from & ((1 << sharp->chipshift)-1);
+
+	*retlen = 0;
+
+	while(len){
+		unsigned long thislen;
+
+		if(chipnum>=sharp->numchips)
+			break;
+
+		thislen = len;
+		if(ofs+thislen >= (1<<sharp->chipshift))
+			thislen = (1<<sharp->chipshift) - ofs;
+
+		ret = sharp_wait(map,&sharp->chips[chipnum]);
+		if(ret<0)
+			break;
+
+		map_copy_from(map,buf,ofs,thislen);
+
+		sharp_release(&sharp->chips[chipnum]);
+
+		*retlen += thislen;
+		len -= thislen;
+		buf += thislen;
+
+		ofs = 0;
+		chipnum++;
+	}
+	return ret;
+}
+
+static int sharp_write(struct mtd_info *mtd, loff_t to, size_t len,
+	size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct sharp_info *sharp = map->fldrv_priv;
+	int ret = 0;
+	int i,j;
+	int chipnum;
+	unsigned long ofs;
+	union { u32 l; unsigned char uc[4]; } tbuf;
+
+	*retlen = 0;
+
+	while(len){
+		tbuf.l = 0xffffffff;
+		chipnum = to >> sharp->chipshift;
+		ofs = to & ((1<<sharp->chipshift)-1);
+
+		j=0;
+		for(i=ofs&3;i<4 && len;i++){
+			tbuf.uc[i] = *buf;
+			buf++;
+			to++;
+			len--;
+			j++;
+		}
+		sharp_write_oneword(map, &sharp->chips[chipnum], ofs&~3, tbuf.l);
+		if(ret<0)
+			return ret;
+		(*retlen)+=j;
+	}
+
+	return 0;
+}
+
+static int sharp_write_oneword(struct map_info *map, struct flchip *chip,
+	unsigned long adr, __u32 datum)
+{
+	int ret;
+	int timeo;
+	int try;
+	int i;
+	int status = 0;
+
+	ret = sharp_wait(map,chip);
+
+	for(try=0;try<10;try++){
+		map_write32(map,CMD_BYTE_WRITE,adr);
+		/* cpu_to_le32 -> hack to fix the writel be->le conversion */
+		map_write32(map,cpu_to_le32(datum),adr);
+
+		chip->state = FL_WRITING;
+
+		timeo = jiffies + (HZ/2);
+
+		map_write32(map,CMD_READ_STATUS,adr);
+		for(i=0;i<100;i++){
+			status = map_read32(map,adr);
+			if((status & SR_READY)==SR_READY)
+				break;
+		}
+		if(i==100){
+			printk("sharp: timed out writing\n");
+		}
+
+		if(!(status&SR_ERRORS))
+			break;
+
+		printk("sharp: error writing byte at addr=%08lx status=%08x\n",adr,status);
+
+		map_write32(map,CMD_CLEAR_STATUS,adr);
+	}
+	map_write32(map,CMD_RESET,adr);
+	chip->state = FL_READY;
+
+	wake_up(&chip->wq);
+	spin_unlock_bh(chip->mutex);
+
+	return 0;
+}
+
+static int sharp_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct map_info *map = mtd->priv;
+	struct sharp_info *sharp = map->fldrv_priv;
+	unsigned long adr,len;
+	int chipnum, ret=0;
+
+//printk("sharp_erase()\n");
+	if(instr->addr & (mtd->erasesize - 1))
+		return -EINVAL;
+	if(instr->len & (mtd->erasesize - 1))
+		return -EINVAL;
+	if(instr->len + instr->addr > mtd->size)
+		return -EINVAL;
+
+	chipnum = instr->addr >> sharp->chipshift;
+	adr = instr->addr & ((1<<sharp->chipshift)-1);
+	len = instr->len;
+
+	while(len){
+		ret = sharp_erase_oneblock(map, &sharp->chips[chipnum], adr);
+		if(ret)return ret;
+
+		adr += mtd->erasesize;
+		len -= mtd->erasesize;
+		if(adr >> sharp->chipshift){
+			adr = 0;
+			chipnum++;
+			if(chipnum>=sharp->numchips)
+				break;
+		}
+	}
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+
+	return 0;
+}
+
+static int sharp_do_wait_for_ready(struct map_info *map, struct flchip *chip,
+	unsigned long adr)
+{
+	int ret;
+	unsigned long timeo;
+	int status;
+	DECLARE_WAITQUEUE(wait, current);
+
+	map_write32(map,CMD_READ_STATUS,adr);
+	status = map_read32(map,adr);
+
+	timeo = jiffies + HZ;
+
+	while(time_before(jiffies, timeo)){
+		map_write32(map,CMD_READ_STATUS,adr);
+		status = map_read32(map,adr);
+		if((status & SR_READY)==SR_READY){
+			ret = 0;
+			goto out;
+		}
+		set_current_state(TASK_INTERRUPTIBLE);
+		add_wait_queue(&chip->wq, &wait);
+
+		//spin_unlock_bh(chip->mutex);
+
+		schedule_timeout(1);
+		schedule();
+		remove_wait_queue(&chip->wq, &wait);
+
+		//spin_lock_bh(chip->mutex);
+		
+		if (signal_pending(current)){
+			ret = -EINTR;
+			goto out;
+		}
+		
+	}
+	ret = -ETIME;
+out:
+	return ret;
+}
+
+static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
+	unsigned long adr)
+{
+	int ret;
+	//int timeo;
+	int status;
+	//int i;
+
+//printk("sharp_erase_oneblock()\n");
+
+#ifdef AUTOUNLOCK
+	/* This seems like a good place to do an unlock */
+	sharp_unlock_oneblock(map,chip,adr);
+#endif
+
+	map_write32(map,CMD_BLOCK_ERASE_1,adr);
+	map_write32(map,CMD_BLOCK_ERASE_2,adr);
+
+	chip->state = FL_ERASING;
+
+	ret = sharp_do_wait_for_ready(map,chip,adr);
+	if(ret<0)return ret;
+
+	map_write32(map,CMD_READ_STATUS,adr);
+	status = map_read32(map,adr);
+
+	if(!(status&SR_ERRORS)){
+		map_write32(map,CMD_RESET,adr);
+		chip->state = FL_READY;
+		//spin_unlock_bh(chip->mutex);
+		return 0;
+	}
+
+	printk("sharp: error erasing block at addr=%08lx status=%08x\n",adr,status);
+	map_write32(map,CMD_CLEAR_STATUS,adr);
+
+	//spin_unlock_bh(chip->mutex);
+
+	return -EIO;
+}
+
+#ifdef AUTOUNLOCK
+static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
+	unsigned long adr)
+{
+	int i;
+	int status;
+
+	map_write32(map,CMD_CLEAR_BLOCK_LOCKS_1,adr);
+	map_write32(map,CMD_CLEAR_BLOCK_LOCKS_2,adr);
+
+	udelay(100);
+
+	status = map_read32(map,adr);
+	printk("status=%08x\n",status);
+
+	for(i=0;i<1000;i++){
+		//map_write32(map,CMD_READ_STATUS,adr);
+		status = map_read32(map,adr);
+		if((status & SR_READY)==SR_READY)
+			break;
+		udelay(100);
+	}
+	if(i==1000){
+		printk("sharp: timed out unlocking block\n");
+	}
+
+	if(!(status&SR_ERRORS)){
+		map_write32(map,CMD_RESET,adr);
+		chip->state = FL_READY;
+		return;
+	}
+
+	printk("sharp: error unlocking block at addr=%08lx status=%08x\n",adr,status);
+	map_write32(map,CMD_CLEAR_STATUS,adr);
+}
+#endif
+
+static void sharp_sync(struct mtd_info *mtd)
+{
+	//printk("sharp_sync()\n");
+}
+
+static int sharp_suspend(struct mtd_info *mtd)
+{
+	printk("sharp_suspend()\n");
+	return -EINVAL;
+}
+
+static void sharp_resume(struct mtd_info *mtd)
+{
+	printk("sharp_resume()\n");
+	
+}
+
+static void sharp_destroy(struct mtd_info *mtd)
+{
+	printk("sharp_destroy()\n");
+
+}
+
+int __init sharp_probe_init(void)
+{
+	printk("MTD Sharp chip driver <ds@lineo.com>\n");
+
+	register_mtd_chip_driver(&sharp_chipdrv);
+
+	return 0;
+}
+
+static void __exit sharp_probe_exit(void)
+{
+	unregister_mtd_chip_driver(&sharp_chipdrv);
+}
+
+module_init(sharp_probe_init);
+module_exit(sharp_probe_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Schleef <ds@schleef.org>");
+MODULE_DESCRIPTION("Old MTD chip driver for pre-CFI Sharp flash chips");
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
new file mode 100644
index 000000000000..60ab4b89a2f9
--- /dev/null
+++ b/drivers/mtd/cmdlinepart.c
@@ -0,0 +1,367 @@
+/*
+ * $Id: cmdlinepart.c,v 1.17 2004/11/26 11:18:47 lavinen Exp $
+ *
+ * Read flash partition table from command line
+ *
+ * Copyright 2002 SYSGO Real-Time Solutions GmbH
+ *
+ * The format for the command line is as follows:
+ * 
+ * mtdparts=<mtddef>[;<mtddef]
+ * <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
+ * <partdef> := <size>[@offset][<name>][ro]
+ * <mtd-id>  := unique name used in mapping driver/device (mtd->name)
+ * <size>    := standard linux memsize OR "-" to denote all remaining space
+ * <name>    := '(' NAME ')'
+ * 
+ * Examples:
+ * 
+ * 1 NOR Flash, with 1 single writable partition:
+ * edb7312-nor:-
+ * 
+ * 1 NOR Flash with 2 partitions, 1 NAND with one
+ * edb7312-nor:256k(ARMboot)ro,-(root);edb7312-nand:-(home)
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/bootmem.h>
+
+/* error message prefix */
+#define ERRP "mtd: "
+
+/* debug macro */
+#if 0
+#define dbg(x) do { printk("DEBUG-CMDLINE-PART: "); printk x; } while(0)
+#else
+#define dbg(x)
+#endif
+
+
+/* special size referring to all the remaining space in a partition */
+#define SIZE_REMAINING 0xffffffff
+
+struct cmdline_mtd_partition {
+	struct cmdline_mtd_partition *next;
+	char *mtd_id;
+	int num_parts;
+	struct mtd_partition *parts;
+};
+
+/* mtdpart_setup() parses into here */
+static struct cmdline_mtd_partition *partitions;
+
+/* the command line passed to mtdpart_setupd() */
+static char *cmdline;
+static int cmdline_parsed = 0;
+
+/*
+ * Parse one partition definition for an MTD. Since there can be many
+ * comma separated partition definitions, this function calls itself 
+ * recursively until no more partition definitions are found. Nice side
+ * effect: the memory to keep the mtd_partition structs and the names
+ * is allocated upon the last definition being found. At that point the
+ * syntax has been verified ok.
+ */
+static struct mtd_partition * newpart(char *s, 
+                                      char **retptr,
+                                      int *num_parts,
+                                      int this_part, 
+                                      unsigned char **extra_mem_ptr, 
+                                      int extra_mem_size)
+{
+	struct mtd_partition *parts;
+	unsigned long size;
+	unsigned long offset = 0;
+	char *name;
+	int name_len;
+	unsigned char *extra_mem;
+	char delim;
+	unsigned int mask_flags;
+
+	/* fetch the partition size */
+	if (*s == '-')
+	{	/* assign all remaining space to this partition */
+		size = SIZE_REMAINING;
+		s++;
+	}
+	else
+	{
+		size = memparse(s, &s);
+		if (size < PAGE_SIZE)
+		{
+			printk(KERN_ERR ERRP "partition size too small (%lx)\n", size);
+			return NULL;
+		}
+	}
+
+	/* fetch partition name and flags */
+	mask_flags = 0; /* this is going to be a regular partition */
+	delim = 0;
+        /* check for offset */
+        if (*s == '@') 
+	{
+                s++;
+                offset = memparse(s, &s);
+        }
+        /* now look for name */
+	if (*s == '(')
+	{
+		delim = ')';
+	}
+		
+	if (delim)
+	{
+		char *p;
+
+	    	name = ++s;
+		if ((p = strchr(name, delim)) == 0)
+		{
+			printk(KERN_ERR ERRP "no closing %c found in partition name\n", delim);
+			return NULL;
+		}
+		name_len = p - name;
+		s = p + 1;
+	}
+	else
+	{
+	    	name = NULL;
+		name_len = 13; /* Partition_000 */
+	}
+   
+	/* record name length for memory allocation later */
+	extra_mem_size += name_len + 1;
+
+        /* test for options */
+        if (strncmp(s, "ro", 2) == 0) 
+	{
+		mask_flags |= MTD_WRITEABLE;
+		s += 2;
+        }
+
+	/* test if more partitions are following */
+	if (*s == ',')
+	{
+		if (size == SIZE_REMAINING)
+		{
+			printk(KERN_ERR ERRP "no partitions allowed after a fill-up partition\n");
+			return NULL;
+		}
+		/* more partitions follow, parse them */
+		if ((parts = newpart(s + 1, &s, num_parts, 
+		                     this_part + 1, &extra_mem, extra_mem_size)) == 0)
+		  return NULL;
+	}
+	else
+	{	/* this is the last partition: allocate space for all */
+		int alloc_size;
+
+		*num_parts = this_part + 1;
+		alloc_size = *num_parts * sizeof(struct mtd_partition) +
+			     extra_mem_size;
+		parts = kmalloc(alloc_size, GFP_KERNEL);
+		if (!parts)
+		{
+			printk(KERN_ERR ERRP "out of memory\n");
+			return NULL;
+		}
+		memset(parts, 0, alloc_size);
+		extra_mem = (unsigned char *)(parts + *num_parts);
+	}
+	/* enter this partition (offset will be calculated later if it is zero at this point) */
+	parts[this_part].size = size;
+	parts[this_part].offset = offset;
+	parts[this_part].mask_flags = mask_flags;
+	if (name)
+	{
+		strlcpy(extra_mem, name, name_len + 1);
+	}
+	else
+	{
+		sprintf(extra_mem, "Partition_%03d", this_part);
+	}
+	parts[this_part].name = extra_mem;
+	extra_mem += name_len + 1;
+
+	dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n",
+	     this_part, 
+	     parts[this_part].name,
+	     parts[this_part].offset,
+	     parts[this_part].size,
+	     parts[this_part].mask_flags));
+
+	/* return (updated) pointer to extra_mem memory */
+	if (extra_mem_ptr)
+	  *extra_mem_ptr = extra_mem;
+
+	/* return (updated) pointer command line string */
+	*retptr = s;
+
+	/* return partition table */
+	return parts;
+}
+
+/* 
+ * Parse the command line. 
+ */
+static int mtdpart_setup_real(char *s)
+{
+	cmdline_parsed = 1;
+
+	for( ; s != NULL; )
+	{
+		struct cmdline_mtd_partition *this_mtd;
+		struct mtd_partition *parts;
+	    	int mtd_id_len;
+		int num_parts;
+		char *p, *mtd_id;
+
+	    	mtd_id = s;
+		/* fetch <mtd-id> */
+		if (!(p = strchr(s, ':')))
+		{
+			printk(KERN_ERR ERRP "no mtd-id\n");
+			return 0;
+		}
+		mtd_id_len = p - mtd_id;
+
+		dbg(("parsing <%s>\n", p+1));
+
+		/* 
+		 * parse one mtd. have it reserve memory for the
+		 * struct cmdline_mtd_partition and the mtd-id string.
+		 */
+		parts = newpart(p + 1,		/* cmdline */
+				&s,		/* out: updated cmdline ptr */
+				&num_parts,	/* out: number of parts */
+				0,		/* first partition */
+				(unsigned char**)&this_mtd, /* out: extra mem */
+				mtd_id_len + 1 + sizeof(*this_mtd));
+		if(!parts)
+		{
+			/*
+			 * An error occurred. We're either:
+			 * a) out of memory, or
+			 * b) in the middle of the partition spec
+			 * Either way, this mtd is hosed and we're
+			 * unlikely to succeed in parsing any more
+			 */
+			 return 0;
+		 }
+
+		/* enter results */	    
+		this_mtd->parts = parts;
+		this_mtd->num_parts = num_parts;
+		this_mtd->mtd_id = (char*)(this_mtd + 1);
+		strlcpy(this_mtd->mtd_id, mtd_id, mtd_id_len + 1);
+
+		/* link into chain */
+		this_mtd->next = partitions;	    	
+		partitions = this_mtd;
+
+		dbg(("mtdid=<%s> num_parts=<%d>\n", 
+		     this_mtd->mtd_id, this_mtd->num_parts));
+		
+
+		/* EOS - we're done */
+		if (*s == 0)
+			break;
+
+		/* does another spec follow? */
+		if (*s != ';')
+		{
+			printk(KERN_ERR ERRP "bad character after partition (%c)\n", *s);
+			return 0;
+		}
+		s++;
+	}
+	return 1;
+}
+
+/*
+ * Main function to be called from the MTD mapping driver/device to
+ * obtain the partitioning information. At this point the command line
+ * arguments will actually be parsed and turned to struct mtd_partition
+ * information. It returns partitions for the requested mtd device, or
+ * the first one in the chain if a NULL mtd_id is passed in.
+ */
+static int parse_cmdline_partitions(struct mtd_info *master, 
+                             struct mtd_partition **pparts,
+                             unsigned long origin)
+{
+	unsigned long offset;
+	int i;
+	struct cmdline_mtd_partition *part;
+	char *mtd_id = master->name;
+
+	if(!cmdline)
+		return -EINVAL;
+
+	/* parse command line */
+	if (!cmdline_parsed)
+		mtdpart_setup_real(cmdline);
+
+	for(part = partitions; part; part = part->next)
+	{
+		if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id)))
+		{
+			for(i = 0, offset = 0; i < part->num_parts; i++)
+			{
+				if (!part->parts[i].offset)
+				  part->parts[i].offset = offset;
+				else
+				  offset = part->parts[i].offset;
+				if (part->parts[i].size == SIZE_REMAINING)
+				  part->parts[i].size = master->size - offset;
+				if (offset + part->parts[i].size > master->size)
+				{
+					printk(KERN_WARNING ERRP 
+					       "%s: partitioning exceeds flash size, truncating\n",
+					       part->mtd_id);
+					part->parts[i].size = master->size - offset;
+					part->num_parts = i;
+				}
+				offset += part->parts[i].size;
+			}
+			*pparts = part->parts;
+			return part->num_parts;
+		}
+	}
+	return -EINVAL;
+}
+
+
+/* 
+ * This is the handler for our kernel parameter, called from 
+ * main.c::checksetup(). Note that we can not yet kmalloc() anything,
+ * so we only save the commandline for later processing.
+ *
+ * This function needs to be visible for bootloaders.
+ */
+int mtdpart_setup(char *s)
+{
+	cmdline = s;
+	return 1;
+}
+
+__setup("mtdparts=", mtdpart_setup);
+
+static struct mtd_part_parser cmdline_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_cmdline_partitions,
+	.name = "cmdlinepart",
+};
+
+static int __init cmdline_parser_init(void)
+{
+	return register_mtd_parser(&cmdline_parser);
+}
+
+module_init(cmdline_parser_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
+MODULE_DESCRIPTION("Command line configuration of MTD partitions");
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
new file mode 100644
index 000000000000..c4a56a4ac5e2
--- /dev/null
+++ b/drivers/mtd/devices/Kconfig
@@ -0,0 +1,259 @@
+# drivers/mtd/maps/Kconfig
+# $Id: Kconfig,v 1.15 2004/12/22 17:51:15 joern Exp $
+
+menu "Self-contained MTD device drivers"
+	depends on MTD!=n
+
+config MTD_PMC551
+	tristate "Ramix PMC551 PCI Mezzanine RAM card support"
+	depends on MTD && PCI
+	---help---
+	  This provides a MTD device driver for the Ramix PMC551 RAM PCI card
+	  from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
+	  These devices come in memory configurations from 32M - 1G.  If you
+	  have one, you probably want to enable this.
+
+	  If this driver is compiled as a module you get the ability to select
+	  the size of the aperture window pointing into the devices memory.
+	  What this means is that if you have a 1G card, normally the kernel
+	  will use a 1G memory map as its view of the device.  As a module,
+	  you can select a 1M window into the memory and the driver will
+	  "slide" the window around the PMC551's memory.  This was
+	  particularly useful on the 2.2 kernels on PPC architectures as there
+	  was limited kernel space to deal with.
+
+config MTD_PMC551_BUGFIX
+	bool "PMC551 256M DRAM Bugfix"
+	depends on MTD_PMC551
+	help
+	  Some of Ramix's PMC551 boards with 256M configurations have invalid
+	  column and row mux values.  This option will fix them, but will
+	  break other memory configurations.  If unsure say N.
+
+config MTD_PMC551_DEBUG
+	bool "PMC551 Debugging"
+	depends on MTD_PMC551
+	help
+	  This option makes the PMC551 more verbose during its operation and
+	  is only really useful if you are developing on this driver or
+	  suspect a possible hardware or driver bug.  If unsure say N.
+
+config MTD_MS02NV
+	tristate "DEC MS02-NV NVRAM module support"
+	depends on MTD && MACH_DECSTATION
+	help
+	  This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
+	  backed-up NVRAM module.  The module was originally meant as an NFS
+	  accelerator.  Say Y here if you have a DECstation 5000/2x0 or a
+	  DECsystem 5900 equipped with such a module.
+
+config MTD_SLRAM
+	tristate "Uncached system RAM"
+	depends on MTD
+	help
+	  If your CPU cannot cache all of the physical memory in your machine,
+	  you can still use it for storage or swap by using this driver to
+	  present it to the system as a Memory Technology Device.
+
+config MTD_PHRAM
+	tristate "Physical system RAM"
+	depends on MTD
+	help
+	  This is a re-implementation of the slram driver above.
+
+	  Use this driver to access physical memory that the kernel proper
+	  doesn't have access to, memory beyond the mem=xxx limit, nvram,
+	  memory on the video card, etc...
+
+config MTD_LART
+	tristate "28F160xx flash driver for LART"
+	depends on SA1100_LART && MTD
+	help
+	  This enables the flash driver for LART. Please note that you do
+	  not need any mapping/chip driver for LART. This one does it all
+	  for you, so go disable all of those if you enabled some of them (:
+
+config MTD_MTDRAM
+	tristate "Test driver using RAM"
+	depends on MTD
+	help
+	  This enables a test MTD device driver which uses vmalloc() to
+	  provide storage.  You probably want to say 'N' unless you're
+	  testing stuff.
+
+config MTDRAM_TOTAL_SIZE
+	int "MTDRAM device size in KiB"
+	depends on MTD_MTDRAM
+	default "4096"
+	help
+	  This allows you to configure the total size of the MTD device
+	  emulated by the MTDRAM driver.  If the MTDRAM driver is built
+	  as a module, it is also possible to specify this as a parameter when
+	  loading the module.
+
+config MTDRAM_ERASE_SIZE
+	int "MTDRAM erase block size in KiB"
+	depends on MTD_MTDRAM
+	default "128"
+	help
+	  This allows you to configure the size of the erase blocks in the
+	  device emulated by the MTDRAM driver.  If the MTDRAM driver is built
+	  as a module, it is also possible to specify this as a parameter when
+	  loading the module.
+
+#If not a module (I don't want to test it as a module)
+config MTDRAM_ABS_POS
+	hex "SRAM Hexadecimal Absolute position or 0"
+	depends on MTD_MTDRAM=y
+	default "0"
+	help
+	  If you have system RAM accessible by the CPU but not used by Linux
+	  in normal operation, you can give the physical address at which the
+	  available RAM starts, and the MTDRAM driver will use it instead of
+	  allocating space from Linux's available memory. Otherwise, leave 
+	  this set to zero. Most people will want to leave this as zero.
+
+config MTD_BLKMTD
+	tristate "MTD emulation using block device"
+	depends on MTD
+	help
+	  This driver allows a block device to appear as an MTD. It would
+	  generally be used in the following cases:
+
+	  Using Compact Flash as an MTD, these usually present themselves to
+	  the system as an ATA drive.
+	  Testing MTD users (eg JFFS2) on large media and media that might
+	  be removed during a write (using the floppy drive).
+
+config MTD_BLOCK2MTD
+	tristate "MTD using block device (rewrite)"
+	depends on MTD && EXPERIMENTAL
+	help
+	  This driver is basically the same at MTD_BLKMTD above, but
+	  experienced some interface changes plus serious speedups.  In
+	  the long term, it should replace MTD_BLKMTD.  Right now, you
+	  shouldn't entrust important data to it yet.
+
+comment "Disk-On-Chip Device Drivers"
+
+config MTD_DOC2000
+	tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)"
+	depends on MTD
+	select MTD_DOCPROBE
+	select MTD_NAND_IDS
+	---help---
+	  This provides an MTD device driver for the M-Systems DiskOnChip
+	  2000 and Millennium devices.  Originally designed for the DiskOnChip
+	  2000, it also now includes support for the DiskOnChip Millennium.
+	  If you have problems with this driver and the DiskOnChip Millennium,
+	  you may wish to try the alternative Millennium driver below. To use
+	  the alternative driver, you will need to undefine DOC_SINGLE_DRIVER
+	  in the <file:drivers/mtd/devices/docprobe.c> source code.
+
+	  If you use this device, you probably also want to enable the NFTL
+	  'NAND Flash Translation Layer' option below, which is used to
+	  emulate a block device by using a kind of file system on the flash
+	  chips.
+
+	  NOTE: This driver is deprecated and will probably be removed soon.
+	  Please try the new DiskOnChip driver under "NAND Flash Device
+	  Drivers".
+
+config MTD_DOC2001
+	tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)"
+	depends on MTD
+	select MTD_DOCPROBE
+	select MTD_NAND_IDS
+	---help---
+	  This provides an alternative MTD device driver for the M-Systems 
+	  DiskOnChip Millennium devices.  Use this if you have problems with
+	  the combined DiskOnChip 2000 and Millennium driver above.  To get
+	  the DiskOnChip probe code to load and use this driver instead of
+	  the other one, you will need to undefine DOC_SINGLE_DRIVER near
+	  the beginning of <file:drivers/mtd/devices/docprobe.c>.
+
+	  If you use this device, you probably also want to enable the NFTL
+	  'NAND Flash Translation Layer' option below, which is used to
+	  emulate a block device by using a kind of file system on the flash
+	  chips.
+
+	  NOTE: This driver is deprecated and will probably be removed soon.
+	  Please try the new DiskOnChip driver under "NAND Flash Device
+	  Drivers".
+
+config MTD_DOC2001PLUS
+	tristate "M-Systems Disk-On-Chip Millennium Plus"
+	depends on MTD
+	select MTD_DOCPROBE
+	select MTD_NAND_IDS
+	---help---
+	  This provides an MTD device driver for the M-Systems DiskOnChip
+	  Millennium Plus devices.
+
+	  If you use this device, you probably also want to enable the INFTL
+	  'Inverse NAND Flash Translation Layer' option below, which is used
+	  to emulate a block device by using a kind of file system on the 
+	  flash chips.
+
+	  NOTE: This driver will soon be replaced by the new DiskOnChip driver
+	  under "NAND Flash Device Drivers" (currently that driver does not
+	  support all Millennium Plus devices).
+
+config MTD_DOCPROBE
+	tristate
+	select MTD_DOCECC
+
+config MTD_DOCECC
+	tristate
+
+config MTD_DOCPROBE_ADVANCED
+	bool "Advanced detection options for DiskOnChip"
+	depends on MTD_DOCPROBE
+	help
+	  This option allows you to specify nonstandard address at which to
+	  probe for a DiskOnChip, or to change the detection options.  You
+	  are unlikely to need any of this unless you are using LinuxBIOS.
+	  Say 'N'.
+
+config MTD_DOCPROBE_ADDRESS
+	hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED
+	depends on MTD_DOCPROBE
+	default "0x0000" if MTD_DOCPROBE_ADVANCED
+	default "0" if !MTD_DOCPROBE_ADVANCED
+	---help---
+	  By default, the probe for DiskOnChip devices will look for a
+	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+	  This option allows you to specify a single address at which to probe
+	  for the device, which is useful if you have other devices in that
+	  range which get upset when they are probed.
+
+	  (Note that on PowerPC, the normal probe will only check at
+	  0xE4000000.)
+
+	  Normally, you should leave this set to zero, to allow the probe at
+	  the normal addresses.
+
+config MTD_DOCPROBE_HIGH
+	bool "Probe high addresses"
+	depends on MTD_DOCPROBE_ADVANCED
+	help
+	  By default, the probe for DiskOnChip devices will look for a
+	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+	  This option changes to make it probe between 0xFFFC8000 and
+	  0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
+	  useful to you.  Say 'N'.
+
+config MTD_DOCPROBE_55AA
+	bool "Probe for 0x55 0xAA BIOS Extension Signature"
+	depends on MTD_DOCPROBE_ADVANCED
+	help
+	  Check for the 0x55 0xAA signature of a DiskOnChip, and do not
+	  continue with probing if it is absent.  The signature will always be
+	  present for a DiskOnChip 2000 or a normal DiskOnChip Millennium.
+	  Only if you have overwritten the first block of a DiskOnChip
+	  Millennium will it be absent.  Enable this option if you are using
+	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
+	  you have managed to wipe the first block.
+
+endmenu
+
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
new file mode 100644
index 000000000000..e38db348057d
--- /dev/null
+++ b/drivers/mtd/devices/Makefile
@@ -0,0 +1,25 @@
+#
+# linux/drivers/devices/Makefile
+#
+# $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $
+
+#                       *** BIG UGLY NOTE ***
+#
+# The removal of get_module_symbol() and replacement with
+# inter_module_register() et al has introduced a link order dependency
+# here where previously there was none.  We now have to ensure that
+# doc200[01].o are linked before docprobe.o
+
+obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
+obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
+obj-$(CONFIG_MTD_DOC2001PLUS)	+= doc2001plus.o
+obj-$(CONFIG_MTD_DOCPROBE)	+= docprobe.o
+obj-$(CONFIG_MTD_DOCECC)	+= docecc.o
+obj-$(CONFIG_MTD_SLRAM)		+= slram.o
+obj-$(CONFIG_MTD_PHRAM)		+= phram.o
+obj-$(CONFIG_MTD_PMC551)	+= pmc551.o
+obj-$(CONFIG_MTD_MS02NV)	+= ms02-nv.o
+obj-$(CONFIG_MTD_MTDRAM)	+= mtdram.o
+obj-$(CONFIG_MTD_LART)		+= lart.o
+obj-$(CONFIG_MTD_BLKMTD)	+= blkmtd.o
+obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
diff --git a/drivers/mtd/devices/blkmtd.c b/drivers/mtd/devices/blkmtd.c
new file mode 100644
index 000000000000..662e807801ed
--- /dev/null
+++ b/drivers/mtd/devices/blkmtd.c
@@ -0,0 +1,823 @@
+/*
+ * $Id: blkmtd.c,v 1.24 2004/11/16 18:29:01 dwmw2 Exp $
+ *
+ * blkmtd.c - use a block device as a fake MTD
+ *
+ * Author: Simon Evans <spse@secret.org.uk>
+ *
+ * Copyright (C) 2001,2002 Simon Evans
+ *
+ * Licence: GPL
+ *
+ * How it works:
+ *	The driver uses raw/io to read/write the device and the page
+ *	cache to cache access. Writes update the page cache with the
+ *	new data and mark it dirty and add the page into a BIO which
+ *	is then written out.
+ *
+ *	It can be loaded Read-Only to prevent erases and writes to the
+ *	medium.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/blkdev.h>
+#include <linux/bio.h>
+#include <linux/pagemap.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+
+
+#define err(format, arg...) printk(KERN_ERR "blkmtd: " format "\n" , ## arg)
+#define info(format, arg...) printk(KERN_INFO "blkmtd: " format "\n" , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING "blkmtd: " format "\n" , ## arg)
+#define crit(format, arg...) printk(KERN_CRIT "blkmtd: " format "\n" , ## arg)
+
+
+/* Default erase size in K, always make it a multiple of PAGE_SIZE */
+#define CONFIG_MTD_BLKDEV_ERASESIZE (128 << 10)	/* 128KiB */
+#define VERSION "$Revision: 1.24 $"
+
+/* Info for the block device */
+struct blkmtd_dev {
+	struct list_head list;
+	struct block_device *blkdev;
+	struct mtd_info mtd_info;
+	struct semaphore wrbuf_mutex;
+};
+
+
+/* Static info about the MTD, used in cleanup_module */
+static LIST_HEAD(blkmtd_device_list);
+
+
+static void blkmtd_sync(struct mtd_info *mtd);
+
+#define MAX_DEVICES 4
+
+/* Module parameters passed by insmod/modprobe */
+static char *device[MAX_DEVICES];    /* the block device to use */
+static int erasesz[MAX_DEVICES];     /* optional default erase size */
+static int ro[MAX_DEVICES];          /* optional read only flag */
+static int sync;
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>");
+MODULE_DESCRIPTION("Emulate an MTD using a block device");
+module_param_array(device, charp, NULL, 0);
+MODULE_PARM_DESC(device, "block device to use");
+module_param_array(erasesz, int, NULL, 0);
+MODULE_PARM_DESC(erasesz, "optional erase size to use in KiB. eg 4=4KiB.");
+module_param_array(ro, bool, NULL, 0);
+MODULE_PARM_DESC(ro, "1=Read only, writes and erases cause errors");
+module_param(sync, bool, 0);
+MODULE_PARM_DESC(sync, "1=Synchronous writes");
+
+
+/* completion handler for BIO reads */
+static int bi_read_complete(struct bio *bio, unsigned int bytes_done, int error)
+{
+	if (bio->bi_size)
+		return 1;
+
+	complete((struct completion*)bio->bi_private);
+	return 0;
+}
+
+
+/* completion handler for BIO writes */
+static int bi_write_complete(struct bio *bio, unsigned int bytes_done, int error)
+{
+	const int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
+	struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
+
+	if (bio->bi_size)
+		return 1;
+
+	if(!uptodate)
+		err("bi_write_complete: not uptodate\n");
+
+	do {
+		struct page *page = bvec->bv_page;
+		DEBUG(3, "Cleaning up page %ld\n", page->index);
+		if (--bvec >= bio->bi_io_vec)
+			prefetchw(&bvec->bv_page->flags);
+
+		if (uptodate) {
+			SetPageUptodate(page);
+		} else {
+			ClearPageUptodate(page);
+			SetPageError(page);
+		}
+		ClearPageDirty(page);
+		unlock_page(page);
+		page_cache_release(page);
+	} while (bvec >= bio->bi_io_vec);
+	
+	complete((struct completion*)bio->bi_private);
+	return 0;
+}
+
+
+/* read one page from the block device */
+static int blkmtd_readpage(struct blkmtd_dev *dev, struct page *page)
+{
+	struct bio *bio;
+	struct completion event;
+	int err = -ENOMEM;
+
+	if(PageUptodate(page)) {
+		DEBUG(2, "blkmtd: readpage page %ld is already upto date\n", page->index);
+		unlock_page(page);
+		return 0;
+	}
+	
+	ClearPageUptodate(page);
+	ClearPageError(page);
+
+	bio = bio_alloc(GFP_KERNEL, 1);
+	if(bio) {
+		init_completion(&event);
+		bio->bi_bdev = dev->blkdev;
+		bio->bi_sector = page->index << (PAGE_SHIFT-9);
+		bio->bi_private = &event;
+		bio->bi_end_io = bi_read_complete;
+		if(bio_add_page(bio, page, PAGE_SIZE, 0) == PAGE_SIZE) {
+			submit_bio(READ_SYNC, bio);
+			wait_for_completion(&event);
+			err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO;
+			bio_put(bio);
+		}
+	}
+
+	if(err)
+		SetPageError(page);
+	else
+		SetPageUptodate(page);
+	flush_dcache_page(page);
+	unlock_page(page);
+	return err;
+}
+
+
+/* write out the current BIO and wait for it to finish */
+static int blkmtd_write_out(struct bio *bio)
+{
+	struct completion event;
+	int err;
+
+	if(!bio->bi_vcnt) {
+		bio_put(bio);
+		return 0;
+	}
+
+	init_completion(&event);
+	bio->bi_private = &event;
+	bio->bi_end_io = bi_write_complete;
+	submit_bio(WRITE_SYNC, bio);
+	wait_for_completion(&event);
+	DEBUG(3, "submit_bio completed, bi_vcnt = %d\n", bio->bi_vcnt);
+	err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO;
+	bio_put(bio);
+	return err;
+}
+
+
+/**
+ * blkmtd_add_page - add a page to the current BIO
+ * @bio: bio to add to (NULL to alloc initial bio)
+ * @blkdev: block device
+ * @page: page to add
+ * @pagecnt: pages left to add
+ *
+ * Adds a page to the current bio, allocating it if necessary. If it cannot be
+ * added, the current bio is written out and a new one is allocated. Returns
+ * the new bio to add or NULL on error
+ */
+static struct bio *blkmtd_add_page(struct bio *bio, struct block_device *blkdev,
+				   struct page *page, int pagecnt)
+{
+
+ retry:
+	if(!bio) {
+		bio = bio_alloc(GFP_KERNEL, pagecnt);
+		if(!bio)
+			return NULL;
+		bio->bi_sector = page->index << (PAGE_SHIFT-9);
+		bio->bi_bdev = blkdev;
+	}
+
+	if(bio_add_page(bio, page, PAGE_SIZE, 0) != PAGE_SIZE) {
+		blkmtd_write_out(bio);
+		bio = NULL;
+		goto retry;
+	}
+	return bio;
+}
+
+
+/**
+ * write_pages - write block of data to device via the page cache
+ * @dev: device to write to
+ * @buf: data source or NULL if erase (output is set to 0xff)
+ * @to: offset into output device
+ * @len: amount to data to write
+ * @retlen: amount of data written
+ *
+ * Grab pages from the page cache and fill them with the source data.
+ * Non page aligned start and end result in a readin of the page and
+ * part of the page being modified. Pages are added to the bio and then written
+ * out.
+ */
+static int write_pages(struct blkmtd_dev *dev, const u_char *buf, loff_t to,
+		    size_t len, size_t *retlen)
+{
+	int pagenr, offset;
+	size_t start_len = 0, end_len;
+	int pagecnt = 0;
+	int err = 0;
+	struct bio *bio = NULL;
+	size_t thislen = 0;
+
+	pagenr = to >> PAGE_SHIFT;
+	offset = to & ~PAGE_MASK;
+
+	DEBUG(2, "blkmtd: write_pages: buf = %p to = %ld len = %zd pagenr = %d offset = %d\n",
+	      buf, (long)to, len, pagenr, offset);
+
+	/* see if we have to do a partial write at the start */
+	if(offset) {
+		start_len = ((offset + len) > PAGE_SIZE) ? PAGE_SIZE - offset : len;
+		len -= start_len;
+	}
+
+	/* calculate the length of the other two regions */
+	end_len = len & ~PAGE_MASK;
+	len -= end_len;
+
+	if(start_len)
+		pagecnt++;
+
+	if(len)
+		pagecnt += len >> PAGE_SHIFT;
+
+	if(end_len)
+		pagecnt++;
+
+	down(&dev->wrbuf_mutex);
+
+	DEBUG(3, "blkmtd: write: start_len = %zd len = %zd end_len = %zd pagecnt = %d\n",
+	      start_len, len, end_len, pagecnt);
+
+	if(start_len) {
+		/* do partial start region */
+		struct page *page;
+
+		DEBUG(3, "blkmtd: write: doing partial start, page = %d len = %zd offset = %d\n",
+		      pagenr, start_len, offset);
+
+		BUG_ON(!buf);
+		page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev);
+		lock_page(page);
+		if(PageDirty(page)) {
+			err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n",
+			    to, start_len, len, end_len, pagenr);
+			BUG();
+		}
+		memcpy(page_address(page)+offset, buf, start_len);
+		SetPageDirty(page);
+		SetPageUptodate(page);
+		buf += start_len;
+		thislen = start_len;
+		bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt);
+		if(!bio) {
+			err = -ENOMEM;
+			err("bio_add_page failed\n");
+			goto write_err;
+		}
+		pagecnt--;
+		pagenr++;
+	}
+
+	/* Now do the main loop to a page aligned, n page sized output */
+	if(len) {
+		int pagesc = len >> PAGE_SHIFT;
+		DEBUG(3, "blkmtd: write: whole pages start = %d, count = %d\n",
+		      pagenr, pagesc);
+		while(pagesc) {
+			struct page *page;
+
+			/* see if page is in the page cache */
+			DEBUG(3, "blkmtd: write: grabbing page %d from page cache\n", pagenr);
+			page = grab_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr);
+			if(PageDirty(page)) {
+				BUG();
+			}
+			if(!page) {
+				warn("write: cannot grab cache page %d", pagenr);
+				err = -ENOMEM;
+				goto write_err;
+			}
+			if(!buf) {
+				memset(page_address(page), 0xff, PAGE_SIZE);
+			} else {
+				memcpy(page_address(page), buf, PAGE_SIZE);
+				buf += PAGE_SIZE;
+			}
+			bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt);
+			if(!bio) {
+				err = -ENOMEM;
+				err("bio_add_page failed\n");
+				goto write_err;
+			}
+			pagenr++;
+			pagecnt--;
+			SetPageDirty(page);
+			SetPageUptodate(page);
+			pagesc--;
+			thislen += PAGE_SIZE;
+		}
+	}
+
+	if(end_len) {
+		/* do the third region */
+		struct page *page;
+		DEBUG(3, "blkmtd: write: doing partial end, page = %d len = %zd\n",
+		      pagenr, end_len);
+		BUG_ON(!buf);
+		page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev);
+		lock_page(page);
+		if(PageDirty(page)) {
+			err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n",
+			    to, start_len, len, end_len, pagenr);
+			BUG();
+		}
+		memcpy(page_address(page), buf, end_len);
+		SetPageDirty(page);
+		SetPageUptodate(page);
+		DEBUG(3, "blkmtd: write: writing out partial end\n");
+		thislen += end_len;
+		bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt);
+		if(!bio) {
+			err = -ENOMEM;
+			err("bio_add_page failed\n");
+			goto write_err;
+		}
+		pagenr++;
+	}
+
+	DEBUG(3, "blkmtd: write: got %d vectors to write\n", bio->bi_vcnt);
+ write_err:
+	if(bio)
+		blkmtd_write_out(bio);
+
+	DEBUG(2, "blkmtd: write: end, retlen = %zd, err = %d\n", *retlen, err);
+	up(&dev->wrbuf_mutex);
+
+	if(retlen)
+		*retlen = thislen;
+	return err;
+}
+
+
+/* erase a specified part of the device */
+static int blkmtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct blkmtd_dev *dev = mtd->priv;
+	struct mtd_erase_region_info *einfo = mtd->eraseregions;
+	int numregions = mtd->numeraseregions;
+	size_t from;
+	u_long len;
+	int err = -EIO;
+	size_t retlen;
+
+	instr->state = MTD_ERASING;
+	from = instr->addr;
+	len = instr->len;
+
+	/* check erase region has valid start and length */
+	DEBUG(2, "blkmtd: erase: dev = `%s' from = 0x%zx len = 0x%lx\n",
+	      mtd->name+9, from, len);
+	while(numregions) {
+		DEBUG(3, "blkmtd: checking erase region = 0x%08X size = 0x%X num = 0x%x\n",
+		      einfo->offset, einfo->erasesize, einfo->numblocks);
+		if(from >= einfo->offset
+		   && from < einfo->offset + (einfo->erasesize * einfo->numblocks)) {
+			if(len == einfo->erasesize
+			   && ( (from - einfo->offset) % einfo->erasesize == 0))
+				break;
+		}
+		numregions--;
+		einfo++;
+	}
+
+	if(!numregions) {
+		/* Not a valid erase block */
+		err("erase: invalid erase request 0x%lX @ 0x%08zX", len, from);
+		instr->state = MTD_ERASE_FAILED;
+		err = -EIO;
+	}
+
+	if(instr->state != MTD_ERASE_FAILED) {
+		/* do the erase */
+		DEBUG(3, "Doing erase from = %zd len = %ld\n", from, len);
+		err = write_pages(dev, NULL, from, len, &retlen);
+		if(err || retlen != len) {
+			err("erase failed err = %d", err);
+			instr->state = MTD_ERASE_FAILED;
+		} else {
+			instr->state = MTD_ERASE_DONE;
+		}
+	}
+
+	DEBUG(3, "blkmtd: erase: checking callback\n");
+	mtd_erase_callback(instr);
+	DEBUG(2, "blkmtd: erase: finished (err = %d)\n", err);
+	return err;
+}
+
+
+/* read a range of the data via the page cache */
+static int blkmtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+		       size_t *retlen, u_char *buf)
+{
+	struct blkmtd_dev *dev = mtd->priv;
+	int err = 0;
+	int offset;
+	int pagenr, pages;
+	size_t thislen = 0;
+
+	DEBUG(2, "blkmtd: read: dev = `%s' from = %lld len = %zd buf = %p\n",
+	      mtd->name+9, from, len, buf);
+
+	if(from > mtd->size)
+		return -EINVAL;
+	if(from + len > mtd->size)
+		len = mtd->size - from;
+
+	pagenr = from >> PAGE_SHIFT;
+	offset = from - (pagenr << PAGE_SHIFT);
+
+	pages = (offset+len+PAGE_SIZE-1) >> PAGE_SHIFT;
+	DEBUG(3, "blkmtd: read: pagenr = %d offset = %d, pages = %d\n",
+	      pagenr, offset, pages);
+
+	while(pages) {
+		struct page *page;
+		int cpylen;
+
+		DEBUG(3, "blkmtd: read: looking for page: %d\n", pagenr);
+		page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev);
+		if(IS_ERR(page)) {
+			err = -EIO;
+			goto readerr;
+		}
+
+		cpylen = (PAGE_SIZE > len) ? len : PAGE_SIZE;
+		if(offset+cpylen > PAGE_SIZE)
+			cpylen = PAGE_SIZE-offset;
+
+		memcpy(buf + thislen, page_address(page) + offset, cpylen);
+		offset = 0;
+		len -= cpylen;
+		thislen += cpylen;
+		pagenr++;
+		pages--;
+		if(!PageDirty(page))
+			page_cache_release(page);
+	}
+
+ readerr:
+	if(retlen)
+		*retlen = thislen;
+	DEBUG(2, "blkmtd: end read: retlen = %zd, err = %d\n", thislen, err);
+	return err;
+}
+
+
+/* write data to the underlying device */
+static int blkmtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf)
+{
+	struct blkmtd_dev *dev = mtd->priv;
+	int err;
+
+	if(!len)
+		return 0;
+
+	DEBUG(2, "blkmtd: write: dev = `%s' to = %lld len = %zd buf = %p\n",
+	      mtd->name+9, to, len, buf);
+
+	if(to >= mtd->size) {
+		return -ENOSPC;
+	}
+
+	if(to + len > mtd->size) {
+		len = mtd->size - to;
+	}
+
+	err = write_pages(dev, buf, to, len, retlen);
+	if(err > 0)
+		err = 0;
+	DEBUG(2, "blkmtd: write: end, err = %d\n", err);
+	return err;
+}
+
+
+/* sync the device - wait until the write queue is empty */
+static void blkmtd_sync(struct mtd_info *mtd)
+{
+	/* Currently all writes are synchronous */
+}
+
+
+static void free_device(struct blkmtd_dev *dev)
+{
+	DEBUG(2, "blkmtd: free_device() dev = %p\n", dev);
+	if(dev) {
+		if(dev->mtd_info.eraseregions)
+			kfree(dev->mtd_info.eraseregions);
+		if(dev->mtd_info.name)
+			kfree(dev->mtd_info.name);
+
+		if(dev->blkdev) {
+			invalidate_inode_pages(dev->blkdev->bd_inode->i_mapping);
+			close_bdev_excl(dev->blkdev);
+		}
+		kfree(dev);
+	}
+}
+
+
+/* For a given size and initial erase size, calculate the number
+ * and size of each erase region. Goes round the loop twice,
+ * once to find out how many regions, then allocates space,
+ * then round the loop again to fill it in.
+ */
+static struct mtd_erase_region_info *calc_erase_regions(
+	size_t erase_size, size_t total_size, int *regions)
+{
+	struct mtd_erase_region_info *info = NULL;
+
+	DEBUG(2, "calc_erase_regions, es = %zd size = %zd regions = %d\n",
+	      erase_size, total_size, *regions);
+	/* Make any user specified erasesize be a power of 2
+	   and at least PAGE_SIZE */
+	if(erase_size) {
+		int es = erase_size;
+		erase_size = 1;
+		while(es != 1) {
+			es >>= 1;
+			erase_size <<= 1;
+		}
+		if(erase_size < PAGE_SIZE)
+			erase_size = PAGE_SIZE;
+	} else {
+		erase_size = CONFIG_MTD_BLKDEV_ERASESIZE;
+	}
+
+	*regions = 0;
+
+	do {
+		int tot_size = total_size;
+		int er_size = erase_size;
+		int count = 0, offset = 0, regcnt = 0;
+
+		while(tot_size) {
+			count = tot_size / er_size;
+			if(count) {
+				tot_size = tot_size % er_size;
+				if(info) {
+					DEBUG(2, "adding to erase info off=%d er=%d cnt=%d\n",
+					      offset, er_size, count);
+					(info+regcnt)->offset = offset;
+					(info+regcnt)->erasesize = er_size;
+					(info+regcnt)->numblocks = count;
+					(*regions)++;
+				}
+				regcnt++;
+				offset += (count * er_size);
+			}
+			while(er_size > tot_size)
+				er_size >>= 1;
+		}
+		if(info == NULL) {
+			info = kmalloc(regcnt * sizeof(struct mtd_erase_region_info), GFP_KERNEL);
+			if(!info)
+				break;
+		}
+	} while(!(*regions));
+	DEBUG(2, "calc_erase_regions done, es = %zd size = %zd regions = %d\n",
+	      erase_size, total_size, *regions);
+	return info;
+}
+
+
+extern dev_t __init name_to_dev_t(const char *line);
+
+static struct blkmtd_dev *add_device(char *devname, int readonly, int erase_size)
+{
+	struct block_device *bdev;
+	int mode;
+	struct blkmtd_dev *dev;
+
+	if(!devname)
+		return NULL;
+
+	/* Get a handle on the device */
+
+
+#ifdef MODULE
+	mode = (readonly) ? O_RDONLY : O_RDWR;
+	bdev = open_bdev_excl(devname, mode, NULL);
+#else
+	mode = (readonly) ? FMODE_READ : FMODE_WRITE;
+	bdev = open_by_devnum(name_to_dev_t(devname), mode);
+#endif
+	if(IS_ERR(bdev)) {
+		err("error: cannot open device %s", devname);
+		DEBUG(2, "blkmtd: opening bdev returned %ld\n", PTR_ERR(bdev));
+		return NULL;
+	}
+
+	DEBUG(1, "blkmtd: found a block device major = %d, minor = %d\n",
+	      MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev));
+
+	if(MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+		err("attempting to use an MTD device as a block device");
+		blkdev_put(bdev);
+		return NULL;
+	}
+
+	dev = kmalloc(sizeof(struct blkmtd_dev), GFP_KERNEL);
+	if(dev == NULL) {
+		blkdev_put(bdev);
+		return NULL;
+	}
+
+	memset(dev, 0, sizeof(struct blkmtd_dev));
+	dev->blkdev = bdev;
+	if(!readonly) {
+		init_MUTEX(&dev->wrbuf_mutex);
+	}
+
+	dev->mtd_info.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
+
+	/* Setup the MTD structure */
+	/* make the name contain the block device in */
+	dev->mtd_info.name = kmalloc(sizeof("blkmtd: ") + strlen(devname), GFP_KERNEL);
+	if(dev->mtd_info.name == NULL)
+		goto devinit_err;
+
+	sprintf(dev->mtd_info.name, "blkmtd: %s", devname);
+	dev->mtd_info.eraseregions = calc_erase_regions(erase_size, dev->mtd_info.size,
+							&dev->mtd_info.numeraseregions);
+	if(dev->mtd_info.eraseregions == NULL)
+		goto devinit_err;
+
+	dev->mtd_info.erasesize = dev->mtd_info.eraseregions->erasesize;
+	DEBUG(1, "blkmtd: init: found %d erase regions\n",
+	      dev->mtd_info.numeraseregions);
+
+	if(readonly) {
+		dev->mtd_info.type = MTD_ROM;
+		dev->mtd_info.flags = MTD_CAP_ROM;
+	} else {
+		dev->mtd_info.type = MTD_RAM;
+		dev->mtd_info.flags = MTD_CAP_RAM;
+		dev->mtd_info.erase = blkmtd_erase;
+		dev->mtd_info.write = blkmtd_write;
+		dev->mtd_info.writev = default_mtd_writev;
+		dev->mtd_info.sync = blkmtd_sync;
+	}
+	dev->mtd_info.read = blkmtd_read;
+	dev->mtd_info.readv = default_mtd_readv;
+	dev->mtd_info.priv = dev;
+	dev->mtd_info.owner = THIS_MODULE;
+
+	list_add(&dev->list, &blkmtd_device_list);
+	if (add_mtd_device(&dev->mtd_info)) {
+		/* Device didnt get added, so free the entry */
+		list_del(&dev->list);
+		goto devinit_err;
+	} else {
+		info("mtd%d: [%s] erase_size = %dKiB %s",
+		     dev->mtd_info.index, dev->mtd_info.name + strlen("blkmtd: "),
+		     dev->mtd_info.erasesize >> 10,
+		     readonly ? "(read-only)" : "");
+	}
+	
+	return dev;
+
+ devinit_err:
+	free_device(dev);
+	return NULL;
+}
+
+
+/* Cleanup and exit - sync the device and kill of the kernel thread */
+static void __devexit cleanup_blkmtd(void)
+{
+	struct list_head *temp1, *temp2;
+
+	/* Remove the MTD devices */
+	list_for_each_safe(temp1, temp2, &blkmtd_device_list) {
+		struct blkmtd_dev *dev = list_entry(temp1, struct blkmtd_dev,
+						    list);
+		blkmtd_sync(&dev->mtd_info);
+		del_mtd_device(&dev->mtd_info);
+		info("mtd%d: [%s] removed", dev->mtd_info.index,
+		     dev->mtd_info.name + strlen("blkmtd: "));
+		list_del(&dev->list);
+		free_device(dev);
+	}
+}
+
+#ifndef MODULE
+
+/* Handle kernel boot params */
+
+
+static int __init param_blkmtd_device(char *str)
+{
+	int i;
+
+	for(i = 0; i < MAX_DEVICES; i++) {
+		device[i] = str;
+		DEBUG(2, "blkmtd: device setup: %d = %s\n", i, device[i]);
+		strsep(&str, ",");
+	}
+	return 1;
+}
+
+
+static int __init param_blkmtd_erasesz(char *str)
+{
+	int i;
+	for(i = 0; i < MAX_DEVICES; i++) {
+		char *val = strsep(&str, ",");
+		if(val)
+			erasesz[i] = simple_strtoul(val, NULL, 0);
+		DEBUG(2, "blkmtd: erasesz setup: %d = %d\n", i, erasesz[i]);
+	}
+
+	return 1;
+}
+
+
+static int __init param_blkmtd_ro(char *str)
+{
+	int i;
+	for(i = 0; i < MAX_DEVICES; i++) {
+		char *val = strsep(&str, ",");
+		if(val)
+			ro[i] = simple_strtoul(val, NULL, 0);
+		DEBUG(2, "blkmtd: ro setup: %d = %d\n", i, ro[i]);
+	}
+
+	return 1;
+}
+
+
+static int __init param_blkmtd_sync(char *str)
+{
+	if(str[0] == '1')
+		sync = 1;
+	return 1;
+}
+
+__setup("blkmtd_device=", param_blkmtd_device);
+__setup("blkmtd_erasesz=", param_blkmtd_erasesz);
+__setup("blkmtd_ro=", param_blkmtd_ro);
+__setup("blkmtd_sync=", param_blkmtd_sync);
+
+#endif
+
+
+/* Startup */
+static int __init init_blkmtd(void)
+{
+	int i;
+
+	info("version " VERSION);
+	/* Check args - device[0] is the bare minimum*/
+	if(!device[0]) {
+		err("error: missing `device' name\n");
+		return -EINVAL;
+	}
+
+	for(i = 0; i < MAX_DEVICES; i++)
+		add_device(device[i], ro[i], erasesz[i] << 10);
+
+	if(list_empty(&blkmtd_device_list))
+		return -EINVAL;
+
+	return 0;
+}
+
+module_init(init_blkmtd);
+module_exit(cleanup_blkmtd);
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
new file mode 100644
index 000000000000..cfe6ccf07972
--- /dev/null
+++ b/drivers/mtd/devices/block2mtd.c
@@ -0,0 +1,495 @@
+/*
+ * $Id: block2mtd.c,v 1.23 2005/01/05 17:05:46 dwmw2 Exp $
+ *
+ * block2mtd.c - create an mtd from a block device
+ *
+ * Copyright (C) 2001,2002	Simon Evans <spse@secret.org.uk>
+ * Copyright (C) 2004		Gareth Bult <Gareth@Encryptec.net>
+ * Copyright (C) 2004,2005	J�rn Engel <joern@wh.fh-wedel.de>
+ *
+ * Licence: GPL
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/blkdev.h>
+#include <linux/bio.h>
+#include <linux/pagemap.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/buffer_head.h>
+
+#define VERSION "$Revision: 1.23 $"
+
+
+#define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
+#define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
+
+
+/* Info for the block device */
+struct block2mtd_dev {
+	struct list_head list;
+	struct block_device *blkdev;
+	struct mtd_info mtd;
+	struct semaphore write_mutex;
+};
+
+
+/* Static info about the MTD, used in cleanup_module */
+static LIST_HEAD(blkmtd_device_list);
+
+
+#define PAGE_READAHEAD 64
+void cache_readahead(struct address_space *mapping, int index)
+{
+	filler_t *filler = (filler_t*)mapping->a_ops->readpage;
+	int i, pagei;
+	unsigned ret = 0;
+	unsigned long end_index;
+	struct page *page;
+	LIST_HEAD(page_pool);
+	struct inode *inode = mapping->host;
+	loff_t isize = i_size_read(inode);
+
+	if (!isize) {
+		INFO("iSize=0 in cache_readahead\n");
+		return;
+	}
+
+	end_index = ((isize - 1) >> PAGE_CACHE_SHIFT);
+
+	read_lock_irq(&mapping->tree_lock);
+	for (i = 0; i < PAGE_READAHEAD; i++) {
+		pagei = index + i;
+		if (pagei > end_index) {
+			INFO("Overrun end of disk in cache readahead\n");
+			break;
+		}
+		page = radix_tree_lookup(&mapping->page_tree, pagei);
+		if (page && (!i))
+			break;
+		if (page)
+			continue;
+		read_unlock_irq(&mapping->tree_lock);
+		page = page_cache_alloc_cold(mapping);
+		read_lock_irq(&mapping->tree_lock);
+		if (!page)
+			break;
+		page->index = pagei;
+		list_add(&page->lru, &page_pool);
+		ret++;
+	}
+	read_unlock_irq(&mapping->tree_lock);
+	if (ret)
+		read_cache_pages(mapping, &page_pool, filler, NULL);
+}
+
+
+static struct page* page_readahead(struct address_space *mapping, int index)
+{
+	filler_t *filler = (filler_t*)mapping->a_ops->readpage;
+	//do_page_cache_readahead(mapping, index, XXX, 64);
+	cache_readahead(mapping, index);
+	return read_cache_page(mapping, index, filler, NULL);
+}
+
+
+/* erase a specified part of the device */
+static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
+{
+	struct address_space *mapping = dev->blkdev->bd_inode->i_mapping;
+	struct page *page;
+	int index = to >> PAGE_SHIFT;	// page index
+	int pages = len >> PAGE_SHIFT;
+	u_long *p;
+	u_long *max;
+
+	while (pages) {
+		page = page_readahead(mapping, index);
+		if (!page)
+			return -ENOMEM;
+		if (IS_ERR(page))
+			return PTR_ERR(page);
+
+		max = (u_long*)page_address(page) + PAGE_SIZE;
+		for (p=(u_long*)page_address(page); p<max; p++) 
+			if (*p != -1UL) {
+				lock_page(page);
+				memset(page_address(page), 0xff, PAGE_SIZE);
+				set_page_dirty(page);
+				unlock_page(page);
+				break;
+			}
+
+		page_cache_release(page);
+		pages--;
+		index++;
+	}
+	return 0;
+}
+static int block2mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct block2mtd_dev *dev = mtd->priv;
+	size_t from = instr->addr;
+	size_t len = instr->len;
+	int err;
+
+	instr->state = MTD_ERASING;
+	down(&dev->write_mutex);
+	err = _block2mtd_erase(dev, from, len);
+	up(&dev->write_mutex);
+	if (err) {
+		ERROR("erase failed err = %d", err);
+		instr->state = MTD_ERASE_FAILED;
+	} else
+		instr->state = MTD_ERASE_DONE;
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	return err;
+}
+
+
+static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf)
+{
+	struct block2mtd_dev *dev = mtd->priv;
+	struct page *page;
+	int index = from >> PAGE_SHIFT;
+	int offset = from & (PAGE_SHIFT-1);
+	int cpylen;
+
+	if (from > mtd->size)
+		return -EINVAL;
+	if (from + len > mtd->size)
+		len = mtd->size - from;
+
+	if (retlen)
+		*retlen = 0;
+
+	while (len) {
+		if ((offset + len) > PAGE_SIZE)
+			cpylen = PAGE_SIZE - offset;	// multiple pages
+		else
+			cpylen = len;	// this page
+		len = len - cpylen;
+
+		//      Get page
+		page = page_readahead(dev->blkdev->bd_inode->i_mapping, index);
+		if (!page)
+			return -ENOMEM;
+		if (IS_ERR(page))
+			return PTR_ERR(page);
+
+		memcpy(buf, page_address(page) + offset, cpylen);
+		page_cache_release(page);
+
+		if (retlen)
+			*retlen += cpylen;
+		buf += cpylen;
+		offset = 0;
+		index++;
+	}
+	return 0;
+}
+
+
+/* write data to the underlying device */
+static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
+		loff_t to, size_t len, size_t *retlen)
+{
+	struct page *page;
+	struct address_space *mapping = dev->blkdev->bd_inode->i_mapping;
+	int index = to >> PAGE_SHIFT;	// page index
+	int offset = to & ~PAGE_MASK;	// page offset
+	int cpylen;
+
+	if (retlen)
+		*retlen = 0;
+	while (len) {
+		if ((offset+len) > PAGE_SIZE) 
+			cpylen = PAGE_SIZE - offset;	// multiple pages
+		else
+			cpylen = len;			// this page
+		len = len - cpylen;
+
+		//	Get page
+		page = page_readahead(mapping, index);
+		if (!page)
+			return -ENOMEM;
+		if (IS_ERR(page))
+			return PTR_ERR(page);
+
+		if (memcmp(page_address(page)+offset, buf, cpylen)) {
+			lock_page(page);
+			memcpy(page_address(page) + offset, buf, cpylen);
+			set_page_dirty(page);
+			unlock_page(page);
+		}
+		page_cache_release(page);
+
+		if (retlen)
+			*retlen += cpylen;
+
+		buf += cpylen;
+		offset = 0;
+		index++;
+	}
+	return 0;
+}
+static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
+{
+	struct block2mtd_dev *dev = mtd->priv;
+	int err;
+
+	if (!len)
+		return 0;
+	if (to >= mtd->size)
+		return -ENOSPC;
+	if (to + len > mtd->size)
+		len = mtd->size - to;
+
+	down(&dev->write_mutex);
+	err = _block2mtd_write(dev, buf, to, len, retlen);
+	up(&dev->write_mutex);
+	if (err > 0)
+		err = 0;
+	return err;
+}
+
+
+/* sync the device - wait until the write queue is empty */
+static void block2mtd_sync(struct mtd_info *mtd)
+{
+	struct block2mtd_dev *dev = mtd->priv;
+	sync_blockdev(dev->blkdev);
+	return;
+}
+
+
+static void block2mtd_free_device(struct block2mtd_dev *dev)
+{
+	if (!dev)
+		return;
+
+	kfree(dev->mtd.name);
+
+	if (dev->blkdev) {
+		invalidate_inode_pages(dev->blkdev->bd_inode->i_mapping);
+		close_bdev_excl(dev->blkdev);
+	}
+
+	kfree(dev);
+}
+
+
+/* FIXME: ensure that mtd->size % erase_size == 0 */
+static struct block2mtd_dev *add_device(char *devname, int erase_size)
+{
+	struct block_device *bdev;
+	struct block2mtd_dev *dev;
+
+	if (!devname)
+		return NULL;
+
+	dev = kmalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+	memset(dev, 0, sizeof(*dev));
+
+	/* Get a handle on the device */
+	bdev = open_bdev_excl(devname, O_RDWR, NULL);
+	if (IS_ERR(bdev)) {
+		ERROR("error: cannot open device %s", devname);
+		goto devinit_err;
+	}
+	dev->blkdev = bdev;
+
+	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+		ERROR("attempting to use an MTD device as a block device");
+		goto devinit_err;
+	}
+
+	init_MUTEX(&dev->write_mutex);
+
+	/* Setup the MTD structure */
+	/* make the name contain the block device in */
+	dev->mtd.name = kmalloc(sizeof("block2mtd: ") + strlen(devname),
+			GFP_KERNEL);
+	if (!dev->mtd.name)
+		goto devinit_err;
+
+	sprintf(dev->mtd.name, "block2mtd: %s", devname);
+
+	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
+	dev->mtd.erasesize = erase_size;
+	dev->mtd.type = MTD_RAM;
+	dev->mtd.flags = MTD_CAP_RAM;
+	dev->mtd.erase = block2mtd_erase;
+	dev->mtd.write = block2mtd_write;
+	dev->mtd.writev = default_mtd_writev;
+	dev->mtd.sync = block2mtd_sync;
+	dev->mtd.read = block2mtd_read;
+	dev->mtd.readv = default_mtd_readv;
+	dev->mtd.priv = dev;
+	dev->mtd.owner = THIS_MODULE;
+
+	if (add_mtd_device(&dev->mtd)) {
+		/* Device didnt get added, so free the entry */
+		goto devinit_err;
+	}
+	list_add(&dev->list, &blkmtd_device_list);
+	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+			dev->mtd.name + strlen("blkmtd: "),
+			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+	return dev;
+
+devinit_err:
+	block2mtd_free_device(dev);
+	return NULL;
+}
+
+
+static int ustrtoul(const char *cp, char **endp, unsigned int base)
+{
+	unsigned long result = simple_strtoul(cp, endp, base);
+	switch (**endp) {
+	case 'G' :
+		result *= 1024;
+	case 'M':
+		result *= 1024;
+	case 'k':
+		result *= 1024;
+	/* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
+		if ((*endp)[1] == 'i')
+			(*endp) += 2;
+	}
+	return result;
+}
+
+
+static int parse_num32(u32 *num32, const char *token)
+{
+	char *endp;
+	unsigned long n;
+
+	n = ustrtoul(token, &endp, 0);
+	if (*endp)
+		return -EINVAL;
+
+	*num32 = n;
+	return 0;
+}
+
+
+static int parse_name(char **pname, const char *token, size_t limit)
+{
+	size_t len;
+	char *name;
+
+	len = strlen(token) + 1;
+	if (len > limit)
+		return -ENOSPC;
+
+	name = kmalloc(len, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+
+	strcpy(name, token);
+
+	*pname = name;
+	return 0;
+}
+
+
+static inline void kill_final_newline(char *str)
+{
+	char *newline = strrchr(str, '\n');
+	if (newline && !newline[1])
+		*newline = 0;
+}
+
+
+#define parse_err(fmt, args...) do {		\
+	ERROR("block2mtd: " fmt "\n", ## args);	\
+	return 0;				\
+} while (0)
+
+static int block2mtd_setup(const char *val, struct kernel_param *kp)
+{
+	char buf[80+12], *str=buf; /* 80 for device, 12 for erase size */
+	char *token[2];
+	char *name;
+	u32 erase_size = PAGE_SIZE;
+	int i, ret;
+
+	if (strnlen(val, sizeof(buf)) >= sizeof(buf))
+		parse_err("parameter too long");
+
+	strcpy(str, val);
+	kill_final_newline(str);
+
+	for (i=0; i<2; i++)
+		token[i] = strsep(&str, ",");
+
+	if (str)
+		parse_err("too many arguments");
+
+	if (!token[0])
+		parse_err("no argument");
+
+	ret = parse_name(&name, token[0], 80);
+	if (ret == -ENOMEM)
+		parse_err("out of memory");
+	if (ret == -ENOSPC)
+		parse_err("name too long");
+	if (ret)
+		return 0;
+
+	if (token[1]) {
+		ret = parse_num32(&erase_size, token[1]);
+		if (ret)
+			parse_err("illegal erase size");
+	}
+
+	add_device(name, erase_size);
+
+	return 0;
+}
+
+
+module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
+
+static int __init block2mtd_init(void)
+{
+	INFO("version " VERSION);
+	return 0;
+}
+
+
+static void __devexit block2mtd_exit(void)
+{
+	struct list_head *pos, *next;
+
+	/* Remove the MTD devices */
+	list_for_each_safe(pos, next, &blkmtd_device_list) {
+		struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list);
+		block2mtd_sync(&dev->mtd);
+		del_mtd_device(&dev->mtd);
+		INFO("mtd%d: [%s] removed", dev->mtd.index,
+				dev->mtd.name + strlen("blkmtd: "));
+		list_del(&dev->list);
+		block2mtd_free_device(dev);
+	}
+}
+
+
+module_init(block2mtd_init);
+module_exit(block2mtd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Simon Evans <spse@secret.org.uk> and others");
+MODULE_DESCRIPTION("Emulate an MTD using a block device");
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
new file mode 100644
index 000000000000..5fc532895a24
--- /dev/null
+++ b/drivers/mtd/devices/doc2000.c
@@ -0,0 +1,1309 @@
+
+/*
+ * Linux driver for Disk-On-Chip 2000 and Millennium
+ * (c) 1999 Machine Vision Holdings, Inc.
+ * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
+ *
+ * $Id: doc2000.c,v 1.66 2005/01/05 18:05:12 dwmw2 Exp $
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/doc2000.h>
+
+#define DOC_SUPPORT_2000
+#define DOC_SUPPORT_2000TSOP
+#define DOC_SUPPORT_MILLENNIUM
+
+#ifdef DOC_SUPPORT_2000
+#define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k)
+#else
+#define DoC_is_2000(doc) (0)
+#endif
+
+#if defined(DOC_SUPPORT_2000TSOP) || defined(DOC_SUPPORT_MILLENNIUM)
+#define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil)
+#else
+#define DoC_is_Millennium(doc) (0)
+#endif
+
+/* #define ECC_DEBUG */
+
+/* I have no idea why some DoC chips can not use memcpy_from|to_io().
+ * This may be due to the different revisions of the ASIC controller built-in or
+ * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
+ * this:
+ #undef USE_MEMCPY
+*/
+
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+		    size_t *retlen, u_char *buf);
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf);
+static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
+static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
+			 size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
+static int doc_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, 
+			  unsigned long count, loff_t to, size_t *retlen,
+			  u_char *eccbuf, struct nand_oobinfo *oobsel);
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			size_t *retlen, u_char *buf);
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			 size_t *retlen, const u_char *buf);
+static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
+			 size_t *retlen, const u_char *buf);
+static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
+
+static struct mtd_info *doc2klist = NULL;
+
+/* Perform the required delay cycles by reading from the appropriate register */
+static void DoC_Delay(struct DiskOnChip *doc, unsigned short cycles)
+{
+	volatile char dummy;
+	int i;
+	
+	for (i = 0; i < cycles; i++) {
+		if (DoC_is_Millennium(doc))
+			dummy = ReadDOC(doc->virtadr, NOP);
+		else
+			dummy = ReadDOC(doc->virtadr, DOCStatus);
+	}
+	
+}
+
+/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
+static int _DoC_WaitReady(struct DiskOnChip *doc)
+{
+	void __iomem *docptr = doc->virtadr;
+	unsigned long timeo = jiffies + (HZ * 10);
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "_DoC_WaitReady called for out-of-line wait\n");
+
+	/* Out-of-line routine to wait for chip response */
+	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
+		/* issue 2 read from NOP register after reading from CDSNControl register
+	   	see Software Requirement 11.4 item 2. */
+		DoC_Delay(doc, 2);
+
+		if (time_after(jiffies, timeo)) {
+			DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+			return -EIO;
+		}
+		udelay(1);
+		cond_resched();
+	}
+
+	return 0;
+}
+
+static inline int DoC_WaitReady(struct DiskOnChip *doc)
+{
+	void __iomem *docptr = doc->virtadr;
+
+	/* This is inline, to optimise the common case, where it's ready instantly */
+	int ret = 0;
+
+	/* 4 read form NOP register should be issued in prior to the read from CDSNControl
+	   see Software Requirement 11.4 item 2. */
+	DoC_Delay(doc, 4);
+
+	if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
+		/* Call the out-of-line routine to wait */
+		ret = _DoC_WaitReady(doc);
+
+	/* issue 2 read from NOP register after reading from CDSNControl register
+	   see Software Requirement 11.4 item 2. */
+	DoC_Delay(doc, 2);
+
+	return ret;
+}
+
+/* DoC_Command: Send a flash command to the flash chip through the CDSN Slow IO register to
+   bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
+   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
+
+static inline int DoC_Command(struct DiskOnChip *doc, unsigned char command,
+			      unsigned char xtraflags)
+{
+	void __iomem *docptr = doc->virtadr;
+
+	if (DoC_is_2000(doc))
+		xtraflags |= CDSN_CTRL_FLASH_IO;
+
+	/* Assert the CLE (Command Latch Enable) line to the flash chip */
+	WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
+	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
+
+	if (DoC_is_Millennium(doc))
+		WriteDOC(command, docptr, CDSNSlowIO);
+
+	/* Send the command */
+	WriteDOC_(command, docptr, doc->ioreg);
+	if (DoC_is_Millennium(doc))
+		WriteDOC(command, docptr, WritePipeTerm);
+
+	/* Lower the CLE line */
+	WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
+	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
+
+	/* Wait for the chip to respond - Software requirement 11.4.1 (extended for any command) */
+	return DoC_WaitReady(doc);
+}
+
+/* DoC_Address: Set the current address for the flash chip through the CDSN Slow IO register to
+   bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
+   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
+
+static int DoC_Address(struct DiskOnChip *doc, int numbytes, unsigned long ofs,
+		       unsigned char xtraflags1, unsigned char xtraflags2)
+{
+	int i;
+	void __iomem *docptr = doc->virtadr;
+
+	if (DoC_is_2000(doc))
+		xtraflags1 |= CDSN_CTRL_FLASH_IO;
+
+	/* Assert the ALE (Address Latch Enable) line to the flash chip */
+	WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
+
+	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
+
+	/* Send the address */
+	/* Devices with 256-byte page are addressed as:
+	   Column (bits 0-7), Page (bits 8-15, 16-23, 24-31)
+	   * there is no device on the market with page256
+	   and more than 24 bits.
+	   Devices with 512-byte page are addressed as:
+	   Column (bits 0-7), Page (bits 9-16, 17-24, 25-31)
+	   * 25-31 is sent only if the chip support it.
+	   * bit 8 changes the read command to be sent
+	   (NAND_CMD_READ0 or NAND_CMD_READ1).
+	 */
+
+	if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) {
+		if (DoC_is_Millennium(doc))
+			WriteDOC(ofs & 0xff, docptr, CDSNSlowIO);
+		WriteDOC_(ofs & 0xff, docptr, doc->ioreg);
+	}
+
+	if (doc->page256) {
+		ofs = ofs >> 8;
+	} else {
+		ofs = ofs >> 9;
+	}
+
+	if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) {
+		for (i = 0; i < doc->pageadrlen; i++, ofs = ofs >> 8) {
+			if (DoC_is_Millennium(doc))
+				WriteDOC(ofs & 0xff, docptr, CDSNSlowIO);
+			WriteDOC_(ofs & 0xff, docptr, doc->ioreg);
+		}
+	}
+
+	if (DoC_is_Millennium(doc))
+		WriteDOC(ofs & 0xff, docptr, WritePipeTerm);
+
+	DoC_Delay(doc, 2);	/* Needed for some slow flash chips. mf. */
+	
+	/* FIXME: The SlowIO's for millennium could be replaced by 
+	   a single WritePipeTerm here. mf. */
+
+	/* Lower the ALE line */
+	WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr,
+		 CDSNControl);
+
+	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
+
+	/* Wait for the chip to respond - Software requirement 11.4.1 */
+	return DoC_WaitReady(doc);
+}
+
+/* Read a buffer from DoC, taking care of Millennium odditys */
+static void DoC_ReadBuf(struct DiskOnChip *doc, u_char * buf, int len)
+{
+	volatile int dummy;
+	int modulus = 0xffff;
+	void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (len <= 0)
+		return;
+
+	if (DoC_is_Millennium(doc)) {
+		/* Read the data via the internal pipeline through CDSN IO register,
+		   see Pipelined Read Operations 11.3 */
+		dummy = ReadDOC(docptr, ReadPipeInit);
+
+		/* Millennium should use the LastDataRead register - Pipeline Reads */
+		len--;
+
+		/* This is needed for correctly ECC calculation */
+		modulus = 0xff;
+	}
+
+	for (i = 0; i < len; i++)
+		buf[i] = ReadDOC_(docptr, doc->ioreg + (i & modulus));
+
+	if (DoC_is_Millennium(doc)) {
+		buf[i] = ReadDOC(docptr, LastDataRead);
+	}
+}
+
+/* Write a buffer to DoC, taking care of Millennium odditys */
+static void DoC_WriteBuf(struct DiskOnChip *doc, const u_char * buf, int len)
+{
+	void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (len <= 0)
+		return;
+
+	for (i = 0; i < len; i++)
+		WriteDOC_(buf[i], docptr, doc->ioreg + i);
+
+	if (DoC_is_Millennium(doc)) {
+		WriteDOC(0x00, docptr, WritePipeTerm);
+	}
+}
+
+
+/* DoC_SelectChip: Select a given flash chip within the current floor */
+
+static inline int DoC_SelectChip(struct DiskOnChip *doc, int chip)
+{
+	void __iomem *docptr = doc->virtadr;
+
+	/* Software requirement 11.4.4 before writing DeviceSelect */
+	/* Deassert the CE line to eliminate glitches on the FCE# outputs */
+	WriteDOC(CDSN_CTRL_WP, docptr, CDSNControl);
+	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
+
+	/* Select the individual flash chip requested */
+	WriteDOC(chip, docptr, CDSNDeviceSelect);
+	DoC_Delay(doc, 4);
+
+	/* Reassert the CE line */
+	WriteDOC(CDSN_CTRL_CE | CDSN_CTRL_FLASH_IO | CDSN_CTRL_WP, docptr,
+		 CDSNControl);
+	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
+
+	/* Wait for it to be ready */
+	return DoC_WaitReady(doc);
+}
+
+/* DoC_SelectFloor: Select a given floor (bank of flash chips) */
+
+static inline int DoC_SelectFloor(struct DiskOnChip *doc, int floor)
+{
+	void __iomem *docptr = doc->virtadr;
+
+	/* Select the floor (bank) of chips required */
+	WriteDOC(floor, docptr, FloorSelect);
+
+	/* Wait for the chip to be ready */
+	return DoC_WaitReady(doc);
+}
+
+/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
+
+static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
+{
+	int mfr, id, i, j;
+	volatile char dummy;
+
+	/* Page in the required floor/chip */
+	DoC_SelectFloor(doc, floor);
+	DoC_SelectChip(doc, chip);
+
+	/* Reset the chip */
+	if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) {
+		DEBUG(MTD_DEBUG_LEVEL2,
+		      "DoC_Command (reset) for %d,%d returned true\n",
+		      floor, chip);
+		return 0;
+	}
+
+
+	/* Read the NAND chip ID: 1. Send ReadID command */
+	if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) {
+		DEBUG(MTD_DEBUG_LEVEL2,
+		      "DoC_Command (ReadID) for %d,%d returned true\n",
+		      floor, chip);
+		return 0;
+	}
+
+	/* Read the NAND chip ID: 2. Send address byte zero */
+	DoC_Address(doc, ADDR_COLUMN, 0, CDSN_CTRL_WP, 0);
+
+	/* Read the manufacturer and device id codes from the device */
+
+	if (DoC_is_Millennium(doc)) {
+		DoC_Delay(doc, 2);
+		dummy = ReadDOC(doc->virtadr, ReadPipeInit);
+		mfr = ReadDOC(doc->virtadr, LastDataRead);
+
+		DoC_Delay(doc, 2);
+		dummy = ReadDOC(doc->virtadr, ReadPipeInit);
+		id = ReadDOC(doc->virtadr, LastDataRead);
+	} else {
+		/* CDSN Slow IO register see Software Req 11.4 item 5. */
+		dummy = ReadDOC(doc->virtadr, CDSNSlowIO);
+		DoC_Delay(doc, 2);
+		mfr = ReadDOC_(doc->virtadr, doc->ioreg);
+
+		/* CDSN Slow IO register see Software Req 11.4 item 5. */
+		dummy = ReadDOC(doc->virtadr, CDSNSlowIO);
+		DoC_Delay(doc, 2);
+		id = ReadDOC_(doc->virtadr, doc->ioreg);
+	}
+
+	/* No response - return failure */
+	if (mfr == 0xff || mfr == 0)
+		return 0;
+
+	/* Check it's the same as the first chip we identified. 
+	 * M-Systems say that any given DiskOnChip device should only
+	 * contain _one_ type of flash part, although that's not a 
+	 * hardware restriction. */
+	if (doc->mfr) {
+		if (doc->mfr == mfr && doc->id == id)
+			return 1;	/* This is another the same the first */
+		else
+			printk(KERN_WARNING
+			       "Flash chip at floor %d, chip %d is different:\n",
+			       floor, chip);
+	}
+
+	/* Print and store the manufacturer and ID codes. */
+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+		if (id == nand_flash_ids[i].id) {
+			/* Try to identify manufacturer */
+			for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
+				if (nand_manuf_ids[j].id == mfr)
+					break;
+			}	
+			printk(KERN_INFO
+			       "Flash chip found: Manufacturer ID: %2.2X, "
+			       "Chip ID: %2.2X (%s:%s)\n", mfr, id,
+			       nand_manuf_ids[j].name, nand_flash_ids[i].name);
+			if (!doc->mfr) {
+				doc->mfr = mfr;
+				doc->id = id;
+				doc->chipshift = 
+					ffs((nand_flash_ids[i].chipsize << 20)) - 1;
+				doc->page256 = (nand_flash_ids[i].pagesize == 256) ? 1 : 0;
+				doc->pageadrlen = doc->chipshift > 25 ? 3 : 2;
+				doc->erasesize =
+				    nand_flash_ids[i].erasesize;
+				return 1;
+			}
+			return 0;
+		}
+	}
+
+
+	/* We haven't fully identified the chip. Print as much as we know. */
+	printk(KERN_WARNING "Unknown flash chip found: %2.2X %2.2X\n",
+	       id, mfr);
+
+	printk(KERN_WARNING "Please report to dwmw2@infradead.org\n");
+	return 0;
+}
+
+/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
+
+static void DoC_ScanChips(struct DiskOnChip *this, int maxchips)
+{
+	int floor, chip;
+	int numchips[MAX_FLOORS];
+	int ret = 1;
+
+	this->numchips = 0;
+	this->mfr = 0;
+	this->id = 0;
+
+	/* For each floor, find the number of valid chips it contains */
+	for (floor = 0; floor < MAX_FLOORS; floor++) {
+		ret = 1;
+		numchips[floor] = 0;
+		for (chip = 0; chip < maxchips && ret != 0; chip++) {
+
+			ret = DoC_IdentChip(this, floor, chip);
+			if (ret) {
+				numchips[floor]++;
+				this->numchips++;
+			}
+		}
+	}
+
+	/* If there are none at all that we recognise, bail */
+	if (!this->numchips) {
+		printk(KERN_NOTICE "No flash chips recognised.\n");
+		return;
+	}
+
+	/* Allocate an array to hold the information for each chip */
+	this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
+	if (!this->chips) {
+		printk(KERN_NOTICE "No memory for allocating chip info structures\n");
+		return;
+	}
+
+	ret = 0;
+
+	/* Fill out the chip array with {floor, chipno} for each 
+	 * detected chip in the device. */
+	for (floor = 0; floor < MAX_FLOORS; floor++) {
+		for (chip = 0; chip < numchips[floor]; chip++) {
+			this->chips[ret].floor = floor;
+			this->chips[ret].chip = chip;
+			this->chips[ret].curadr = 0;
+			this->chips[ret].curmode = 0x50;
+			ret++;
+		}
+	}
+
+	/* Calculate and print the total size of the device */
+	this->totlen = this->numchips * (1 << this->chipshift);
+
+	printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
+	       this->numchips, this->totlen >> 20);
+}
+
+static int DoC2k_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
+{
+	int tmp1, tmp2, retval;
+	if (doc1->physadr == doc2->physadr)
+		return 1;
+
+	/* Use the alias resolution register which was set aside for this
+	 * purpose. If it's value is the same on both chips, they might
+	 * be the same chip, and we write to one and check for a change in
+	 * the other. It's unclear if this register is usuable in the
+	 * DoC 2000 (it's in the Millennium docs), but it seems to work. */
+	tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
+	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
+	if (tmp1 != tmp2)
+		return 0;
+
+	WriteDOC((tmp1 + 1) % 0xff, doc1->virtadr, AliasResolution);
+	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
+	if (tmp2 == (tmp1 + 1) % 0xff)
+		retval = 1;
+	else
+		retval = 0;
+
+	/* Restore register contents.  May not be necessary, but do it just to
+	 * be safe. */
+	WriteDOC(tmp1, doc1->virtadr, AliasResolution);
+
+	return retval;
+}
+
+static const char im_name[] = "DoC2k_init";
+
+/* This routine is made available to other mtd code via
+ * inter_module_register.  It must only be accessed through
+ * inter_module_get which will bump the use count of this module.  The
+ * addresses passed back in mtd are valid as long as the use count of
+ * this module is non-zero, i.e. between inter_module_get and
+ * inter_module_put.  Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
+ */
+static void DoC2k_init(struct mtd_info *mtd)
+{
+	struct DiskOnChip *this = mtd->priv;
+	struct DiskOnChip *old = NULL;
+	int maxchips;
+
+	/* We must avoid being called twice for the same device. */
+
+	if (doc2klist)
+		old = doc2klist->priv;
+
+	while (old) {
+		if (DoC2k_is_alias(old, this)) {
+			printk(KERN_NOTICE
+			       "Ignoring DiskOnChip 2000 at 0x%lX - already configured\n",
+			       this->physadr);
+			iounmap(this->virtadr);
+			kfree(mtd);
+			return;
+		}
+		if (old->nextdoc)
+			old = old->nextdoc->priv;
+		else
+			old = NULL;
+	}
+
+
+	switch (this->ChipID) {
+	case DOC_ChipID_Doc2kTSOP:
+		mtd->name = "DiskOnChip 2000 TSOP";
+		this->ioreg = DoC_Mil_CDSN_IO;
+		/* Pretend it's a Millennium */
+		this->ChipID = DOC_ChipID_DocMil;
+		maxchips = MAX_CHIPS;
+		break;
+	case DOC_ChipID_Doc2k:
+		mtd->name = "DiskOnChip 2000";
+		this->ioreg = DoC_2k_CDSN_IO;
+		maxchips = MAX_CHIPS;
+		break;
+	case DOC_ChipID_DocMil:
+		mtd->name = "DiskOnChip Millennium";
+		this->ioreg = DoC_Mil_CDSN_IO;
+		maxchips = MAX_CHIPS_MIL;
+		break;
+	default:
+		printk("Unknown ChipID 0x%02x\n", this->ChipID);
+		kfree(mtd);
+		iounmap(this->virtadr);
+		return;
+	}
+
+	printk(KERN_NOTICE "%s found at address 0x%lX\n", mtd->name,
+	       this->physadr);
+
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
+	mtd->size = 0;
+	mtd->erasesize = 0;
+	mtd->oobblock = 512;
+	mtd->oobsize = 16;
+	mtd->owner = THIS_MODULE;
+	mtd->erase = doc_erase;
+	mtd->point = NULL;
+	mtd->unpoint = NULL;
+	mtd->read = doc_read;
+	mtd->write = doc_write;
+	mtd->read_ecc = doc_read_ecc;
+	mtd->write_ecc = doc_write_ecc;
+	mtd->writev_ecc = doc_writev_ecc;
+	mtd->read_oob = doc_read_oob;
+	mtd->write_oob = doc_write_oob;
+	mtd->sync = NULL;
+
+	this->totlen = 0;
+	this->numchips = 0;
+
+	this->curfloor = -1;
+	this->curchip = -1;
+	init_MUTEX(&this->lock);
+
+	/* Ident all the chips present. */
+	DoC_ScanChips(this, maxchips);
+
+	if (!this->totlen) {
+		kfree(mtd);
+		iounmap(this->virtadr);
+	} else {
+		this->nextdoc = doc2klist;
+		doc2klist = mtd;
+		mtd->size = this->totlen;
+		mtd->erasesize = this->erasesize;
+		add_mtd_device(mtd);
+		return;
+	}
+}
+
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+		    size_t * retlen, u_char * buf)
+{
+	/* Just a special case of doc_read_ecc */
+	return doc_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
+}
+
+static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
+{
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip;
+	unsigned char syndrome[6];
+	volatile char dummy;
+	int i, len256 = 0, ret=0;
+	size_t left = len;
+
+	/* Don't allow read past end of device */
+	if (from >= this->totlen)
+		return -EINVAL;
+
+	down(&this->lock);
+
+	*retlen = 0;
+	while (left) {
+		len = left;
+
+		/* Don't allow a single read to cross a 512-byte block boundary */
+		if (from + len > ((from | 0x1ff) + 1))
+			len = ((from | 0x1ff) + 1) - from;
+
+		/* The ECC will not be calculated correctly if less than 512 is read */
+		if (len != 0x200 && eccbuf)
+			printk(KERN_WARNING
+			       "ECC needs a full sector read (adr: %lx size %lx)\n",
+			       (long) from, (long) len);
+
+		/* printk("DoC_Read (adr: %lx size %lx)\n", (long) from, (long) len); */
+
+
+		/* Find the chip which is to be used and select it */
+		mychip = &this->chips[from >> (this->chipshift)];
+
+		if (this->curfloor != mychip->floor) {
+			DoC_SelectFloor(this, mychip->floor);
+			DoC_SelectChip(this, mychip->chip);
+		} else if (this->curchip != mychip->chip) {
+			DoC_SelectChip(this, mychip->chip);
+		}
+
+		this->curfloor = mychip->floor;
+		this->curchip = mychip->chip;
+
+		DoC_Command(this,
+			    (!this->page256
+			     && (from & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0,
+			    CDSN_CTRL_WP);
+		DoC_Address(this, ADDR_COLUMN_PAGE, from, CDSN_CTRL_WP,
+			    CDSN_CTRL_ECC_IO);
+
+		if (eccbuf) {
+			/* Prime the ECC engine */
+			WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+			WriteDOC(DOC_ECC_EN, docptr, ECCConf);
+		} else {
+			/* disable the ECC engine */
+			WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+			WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+		}
+
+		/* treat crossing 256-byte sector for 2M x 8bits devices */
+		if (this->page256 && from + len > (from | 0xff) + 1) {
+			len256 = (from | 0xff) + 1 - from;
+			DoC_ReadBuf(this, buf, len256);
+
+			DoC_Command(this, NAND_CMD_READ0, CDSN_CTRL_WP);
+			DoC_Address(this, ADDR_COLUMN_PAGE, from + len256,
+				    CDSN_CTRL_WP, CDSN_CTRL_ECC_IO);
+		}
+
+		DoC_ReadBuf(this, &buf[len256], len - len256);
+
+		/* Let the caller know we completed it */
+		*retlen += len;
+
+		if (eccbuf) {
+			/* Read the ECC data through the DiskOnChip ECC logic */
+			/* Note: this will work even with 2M x 8bit devices as   */
+			/*       they have 8 bytes of OOB per 256 page. mf.      */
+			DoC_ReadBuf(this, eccbuf, 6);
+
+			/* Flush the pipeline */
+			if (DoC_is_Millennium(this)) {
+				dummy = ReadDOC(docptr, ECCConf);
+				dummy = ReadDOC(docptr, ECCConf);
+				i = ReadDOC(docptr, ECCConf);
+			} else {
+				dummy = ReadDOC(docptr, 2k_ECCStatus);
+				dummy = ReadDOC(docptr, 2k_ECCStatus);
+				i = ReadDOC(docptr, 2k_ECCStatus);
+			}
+
+			/* Check the ECC Status */
+			if (i & 0x80) {
+				int nb_errors;
+				/* There was an ECC error */
+#ifdef ECC_DEBUG
+				printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from);
+#endif
+				/* Read the ECC syndrom through the DiskOnChip ECC logic.
+				   These syndrome will be all ZERO when there is no error */
+				for (i = 0; i < 6; i++) {
+					syndrome[i] =
+					    ReadDOC(docptr, ECCSyndrome0 + i);
+				}
+	                        nb_errors = doc_decode_ecc(buf, syndrome);
+
+#ifdef ECC_DEBUG
+				printk(KERN_ERR "Errors corrected: %x\n", nb_errors);
+#endif
+	                        if (nb_errors < 0) {
+					/* We return error, but have actually done the read. Not that
+					   this can be told to user-space, via sys_read(), but at least
+					   MTD-aware stuff can know about it by checking *retlen */
+					ret = -EIO;
+	                        }
+			}
+
+#ifdef PSYCHO_DEBUG
+			printk(KERN_DEBUG "ECC DATA at %lxB: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+				     (long)from, eccbuf[0], eccbuf[1], eccbuf[2],
+				     eccbuf[3], eccbuf[4], eccbuf[5]);
+#endif
+		
+			/* disable the ECC engine */
+			WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
+		}
+
+		/* according to 11.4.1, we need to wait for the busy line 
+	         * drop if we read to the end of the page.  */
+		if(0 == ((from + len) & 0x1ff))
+		{
+		    DoC_WaitReady(this);
+		}
+
+		from += len;
+		left -= len;
+		buf += len;
+	}
+
+	up(&this->lock);
+
+	return ret;
+}
+
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t * retlen, const u_char * buf)
+{
+	char eccbuf[6];
+	return doc_write_ecc(mtd, to, len, retlen, buf, eccbuf, NULL);
+}
+
+static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
+			 size_t * retlen, const u_char * buf,
+			 u_char * eccbuf, struct nand_oobinfo *oobsel)
+{
+	struct DiskOnChip *this = mtd->priv;
+	int di; /* Yes, DI is a hangover from when I was disassembling the binary driver */
+	void __iomem *docptr = this->virtadr;
+	volatile char dummy;
+	int len256 = 0;
+	struct Nand *mychip;
+	size_t left = len;
+	int status;
+
+	/* Don't allow write past end of device */
+	if (to >= this->totlen)
+		return -EINVAL;
+
+	down(&this->lock);
+
+	*retlen = 0;
+	while (left) {
+		len = left;
+
+		/* Don't allow a single write to cross a 512-byte block boundary */
+		if (to + len > ((to | 0x1ff) + 1))
+			len = ((to | 0x1ff) + 1) - to;
+
+		/* The ECC will not be calculated correctly if less than 512 is written */
+/* DBB-
+		if (len != 0x200 && eccbuf)
+			printk(KERN_WARNING
+			       "ECC needs a full sector write (adr: %lx size %lx)\n",
+			       (long) to, (long) len);
+   -DBB */
+
+		/* printk("DoC_Write (adr: %lx size %lx)\n", (long) to, (long) len); */
+
+		/* Find the chip which is to be used and select it */
+		mychip = &this->chips[to >> (this->chipshift)];
+
+		if (this->curfloor != mychip->floor) {
+			DoC_SelectFloor(this, mychip->floor);
+			DoC_SelectChip(this, mychip->chip);
+		} else if (this->curchip != mychip->chip) {
+			DoC_SelectChip(this, mychip->chip);
+		}
+
+		this->curfloor = mychip->floor;
+		this->curchip = mychip->chip;
+
+		/* Set device to main plane of flash */
+		DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP);
+		DoC_Command(this,
+			    (!this->page256
+			     && (to & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0,
+			    CDSN_CTRL_WP);
+
+		DoC_Command(this, NAND_CMD_SEQIN, 0);
+		DoC_Address(this, ADDR_COLUMN_PAGE, to, 0, CDSN_CTRL_ECC_IO);
+
+		if (eccbuf) {
+			/* Prime the ECC engine */
+			WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+			WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
+		} else {
+			/* disable the ECC engine */
+			WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+			WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+		}
+
+		/* treat crossing 256-byte sector for 2M x 8bits devices */
+		if (this->page256 && to + len > (to | 0xff) + 1) {
+			len256 = (to | 0xff) + 1 - to;
+			DoC_WriteBuf(this, buf, len256);
+
+			DoC_Command(this, NAND_CMD_PAGEPROG, 0);
+
+			DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
+			/* There's an implicit DoC_WaitReady() in DoC_Command */
+
+			dummy = ReadDOC(docptr, CDSNSlowIO);
+			DoC_Delay(this, 2);
+
+			if (ReadDOC_(docptr, this->ioreg) & 1) {
+				printk(KERN_ERR "Error programming flash\n");
+				/* Error in programming */
+				*retlen = 0;
+				up(&this->lock);
+				return -EIO;
+			}
+
+			DoC_Command(this, NAND_CMD_SEQIN, 0);
+			DoC_Address(this, ADDR_COLUMN_PAGE, to + len256, 0,
+				    CDSN_CTRL_ECC_IO);
+		}
+
+		DoC_WriteBuf(this, &buf[len256], len - len256);
+
+		if (eccbuf) {
+			WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_CE, docptr,
+				 CDSNControl);
+
+			if (DoC_is_Millennium(this)) {
+				WriteDOC(0, docptr, NOP);
+				WriteDOC(0, docptr, NOP);
+				WriteDOC(0, docptr, NOP);
+			} else {
+				WriteDOC_(0, docptr, this->ioreg);
+				WriteDOC_(0, docptr, this->ioreg);
+				WriteDOC_(0, docptr, this->ioreg);
+			}
+
+			WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_FLASH_IO | CDSN_CTRL_CE, docptr,
+				 CDSNControl);
+
+			/* Read the ECC data through the DiskOnChip ECC logic */
+			for (di = 0; di < 6; di++) {
+				eccbuf[di] = ReadDOC(docptr, ECCSyndrome0 + di);
+			}
+
+			/* Reset the ECC engine */
+			WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+
+#ifdef PSYCHO_DEBUG
+			printk
+			    ("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+			     (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
+			     eccbuf[4], eccbuf[5]);
+#endif
+		}
+
+		DoC_Command(this, NAND_CMD_PAGEPROG, 0);
+
+		DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
+		/* There's an implicit DoC_WaitReady() in DoC_Command */
+
+		if (DoC_is_Millennium(this)) {
+			ReadDOC(docptr, ReadPipeInit);
+			status = ReadDOC(docptr, LastDataRead);
+		} else {
+			dummy = ReadDOC(docptr, CDSNSlowIO);
+			DoC_Delay(this, 2);
+			status = ReadDOC_(docptr, this->ioreg);
+		}
+
+		if (status & 1) {
+			printk(KERN_ERR "Error programming flash\n");
+			/* Error in programming */
+			*retlen = 0;
+			up(&this->lock);
+			return -EIO;
+		}
+
+		/* Let the caller know we completed it */
+		*retlen += len;
+		
+		if (eccbuf) {
+			unsigned char x[8];
+			size_t dummy;
+			int ret;
+
+			/* Write the ECC data to flash */
+			for (di=0; di<6; di++)
+				x[di] = eccbuf[di];
+		
+			x[6]=0x55;
+			x[7]=0x55;
+		
+			ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x);
+			if (ret) {
+				up(&this->lock);
+				return ret;
+			}
+		}
+
+		to += len;
+		left -= len;
+		buf += len;
+	}
+
+	up(&this->lock);
+	return 0;
+}
+
+static int doc_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, 
+			  unsigned long count, loff_t to, size_t *retlen,
+			  u_char *eccbuf, struct nand_oobinfo *oobsel)
+{
+	static char static_buf[512];
+	static DECLARE_MUTEX(writev_buf_sem);
+
+	size_t totretlen = 0;
+	size_t thisvecofs = 0;
+	int ret= 0;
+
+	down(&writev_buf_sem);
+
+	while(count) {
+		size_t thislen, thisretlen;
+		unsigned char *buf;
+
+		buf = vecs->iov_base + thisvecofs;
+		thislen = vecs->iov_len - thisvecofs;
+
+
+		if (thislen >= 512) {
+			thislen = thislen & ~(512-1);
+			thisvecofs += thislen;
+		} else {
+			/* Not enough to fill a page. Copy into buf */
+			memcpy(static_buf, buf, thislen);
+			buf = &static_buf[thislen];
+
+			while(count && thislen < 512) {
+				vecs++;
+				count--;
+				thisvecofs = min((512-thislen), vecs->iov_len);
+				memcpy(buf, vecs->iov_base, thisvecofs);
+				thislen += thisvecofs;
+				buf += thisvecofs;
+			}
+			buf = static_buf;
+		}
+		if (count && thisvecofs == vecs->iov_len) {
+			thisvecofs = 0;
+			vecs++;
+			count--;
+		}
+		ret = doc_write_ecc(mtd, to, thislen, &thisretlen, buf, eccbuf, oobsel);
+
+		totretlen += thisretlen;
+
+		if (ret || thisretlen != thislen)
+			break;
+
+		to += thislen;
+	}		
+
+	up(&writev_buf_sem);
+	*retlen = totretlen;
+	return ret;
+}
+
+
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			size_t * retlen, u_char * buf)
+{
+	struct DiskOnChip *this = mtd->priv;
+	int len256 = 0, ret;
+	struct Nand *mychip;
+
+	down(&this->lock);
+
+	mychip = &this->chips[ofs >> this->chipshift];
+
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(this, mychip->floor);
+		DoC_SelectChip(this, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(this, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* update address for 2M x 8bit devices. OOB starts on the second */
+	/* page to maintain compatibility with doc_read_ecc. */
+	if (this->page256) {
+		if (!(ofs & 0x8))
+			ofs += 0x100;
+		else
+			ofs -= 0x8;
+	}
+
+	DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
+	DoC_Address(this, ADDR_COLUMN_PAGE, ofs, CDSN_CTRL_WP, 0);
+
+	/* treat crossing 8-byte OOB data for 2M x 8bit devices */
+	/* Note: datasheet says it should automaticaly wrap to the */
+	/*       next OOB block, but it didn't work here. mf.      */
+	if (this->page256 && ofs + len > (ofs | 0x7) + 1) {
+		len256 = (ofs | 0x7) + 1 - ofs;
+		DoC_ReadBuf(this, buf, len256);
+
+		DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
+		DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff),
+			    CDSN_CTRL_WP, 0);
+	}
+
+	DoC_ReadBuf(this, &buf[len256], len - len256);
+
+	*retlen = len;
+	/* Reading the full OOB data drops us off of the end of the page,
+         * causing the flash device to go into busy mode, so we need
+         * to wait until ready 11.4.1 and Toshiba TC58256FT docs */
+	
+	ret = DoC_WaitReady(this);
+
+	up(&this->lock);
+	return ret;
+
+}
+
+static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
+				size_t * retlen, const u_char * buf)
+{
+	struct DiskOnChip *this = mtd->priv;
+	int len256 = 0;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+	volatile int dummy;
+	int status;
+
+	//      printk("doc_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",(long)ofs, len,
+	//   buf[0], buf[1], buf[2], buf[3], buf[8], buf[9], buf[14],buf[15]);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(this, mychip->floor);
+		DoC_SelectChip(this, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(this, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* disable the ECC engine */
+	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+	WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP);
+
+	/* issue the Read2 command to set the pointer to the Spare Data Area. */
+	DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
+
+	/* update address for 2M x 8bit devices. OOB starts on the second */
+	/* page to maintain compatibility with doc_read_ecc. */
+	if (this->page256) {
+		if (!(ofs & 0x8))
+			ofs += 0x100;
+		else
+			ofs -= 0x8;
+	}
+
+	/* issue the Serial Data In command to initial the Page Program process */
+	DoC_Command(this, NAND_CMD_SEQIN, 0);
+	DoC_Address(this, ADDR_COLUMN_PAGE, ofs, 0, 0);
+
+	/* treat crossing 8-byte OOB data for 2M x 8bit devices */
+	/* Note: datasheet says it should automaticaly wrap to the */
+	/*       next OOB block, but it didn't work here. mf.      */
+	if (this->page256 && ofs + len > (ofs | 0x7) + 1) {
+		len256 = (ofs | 0x7) + 1 - ofs;
+		DoC_WriteBuf(this, buf, len256);
+
+		DoC_Command(this, NAND_CMD_PAGEPROG, 0);
+		DoC_Command(this, NAND_CMD_STATUS, 0);
+		/* DoC_WaitReady() is implicit in DoC_Command */
+
+		if (DoC_is_Millennium(this)) {
+			ReadDOC(docptr, ReadPipeInit);
+			status = ReadDOC(docptr, LastDataRead);
+		} else {
+			dummy = ReadDOC(docptr, CDSNSlowIO);
+			DoC_Delay(this, 2);
+			status = ReadDOC_(docptr, this->ioreg);
+		}
+
+		if (status & 1) {
+			printk(KERN_ERR "Error programming oob data\n");
+			/* There was an error */
+			*retlen = 0;
+			return -EIO;
+		}
+		DoC_Command(this, NAND_CMD_SEQIN, 0);
+		DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), 0, 0);
+	}
+
+	DoC_WriteBuf(this, &buf[len256], len - len256);
+
+	DoC_Command(this, NAND_CMD_PAGEPROG, 0);
+	DoC_Command(this, NAND_CMD_STATUS, 0);
+	/* DoC_WaitReady() is implicit in DoC_Command */
+
+	if (DoC_is_Millennium(this)) {
+		ReadDOC(docptr, ReadPipeInit);
+		status = ReadDOC(docptr, LastDataRead);
+	} else {
+		dummy = ReadDOC(docptr, CDSNSlowIO);
+		DoC_Delay(this, 2);
+		status = ReadDOC_(docptr, this->ioreg);
+	}
+
+	if (status & 1) {
+		printk(KERN_ERR "Error programming oob data\n");
+		/* There was an error */
+		*retlen = 0;
+		return -EIO;
+	}
+
+	*retlen = len;
+	return 0;
+
+}
+ 
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+ 			 size_t * retlen, const u_char * buf)
+{
+ 	struct DiskOnChip *this = mtd->priv;
+ 	int ret;
+
+ 	down(&this->lock);
+ 	ret = doc_write_oob_nolock(mtd, ofs, len, retlen, buf);
+
+ 	up(&this->lock);
+ 	return ret;
+}
+
+static int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct DiskOnChip *this = mtd->priv;
+	__u32 ofs = instr->addr;
+	__u32 len = instr->len;
+	volatile int dummy;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip;
+	int status;
+
+ 	down(&this->lock);
+
+	if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) {
+		up(&this->lock);
+		return -EINVAL;
+	}
+
+	instr->state = MTD_ERASING;
+		
+	/* FIXME: Do this in the background. Use timers or schedule_task() */
+	while(len) {
+		mychip = &this->chips[ofs >> this->chipshift];
+
+		if (this->curfloor != mychip->floor) {
+			DoC_SelectFloor(this, mychip->floor);
+			DoC_SelectChip(this, mychip->chip);
+		} else if (this->curchip != mychip->chip) {
+			DoC_SelectChip(this, mychip->chip);
+		}
+		this->curfloor = mychip->floor;
+		this->curchip = mychip->chip;
+
+		DoC_Command(this, NAND_CMD_ERASE1, 0);
+		DoC_Address(this, ADDR_PAGE, ofs, 0, 0);
+		DoC_Command(this, NAND_CMD_ERASE2, 0);
+
+		DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
+
+		if (DoC_is_Millennium(this)) {
+			ReadDOC(docptr, ReadPipeInit);
+			status = ReadDOC(docptr, LastDataRead);
+		} else {
+			dummy = ReadDOC(docptr, CDSNSlowIO);
+			DoC_Delay(this, 2);
+			status = ReadDOC_(docptr, this->ioreg);
+		}
+
+		if (status & 1) {
+			printk(KERN_ERR "Error erasing at 0x%x\n", ofs);
+			/* There was an error */
+			instr->state = MTD_ERASE_FAILED;
+			goto callback;
+		}
+		ofs += mtd->erasesize;
+		len -= mtd->erasesize;
+	}
+	instr->state = MTD_ERASE_DONE;
+
+ callback:
+	mtd_erase_callback(instr);
+
+	up(&this->lock);
+	return 0;
+}
+
+
+/****************************************************************************
+ *
+ * Module stuff
+ *
+ ****************************************************************************/
+
+static int __init init_doc2000(void)
+{
+       inter_module_register(im_name, THIS_MODULE, &DoC2k_init);
+       return 0;
+}
+
+static void __exit cleanup_doc2000(void)
+{
+	struct mtd_info *mtd;
+	struct DiskOnChip *this;
+
+	while ((mtd = doc2klist)) {
+		this = mtd->priv;
+		doc2klist = this->nextdoc;
+
+		del_mtd_device(mtd);
+
+		iounmap(this->virtadr);
+		kfree(this->chips);
+		kfree(mtd);
+	}
+	inter_module_unregister(im_name);
+}
+
+module_exit(cleanup_doc2000);
+module_init(init_doc2000);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
+MODULE_DESCRIPTION("MTD driver for DiskOnChip 2000 and Millennium");
+
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
new file mode 100644
index 000000000000..1e704915ef08
--- /dev/null
+++ b/drivers/mtd/devices/doc2001.c
@@ -0,0 +1,888 @@
+
+/*
+ * Linux driver for Disk-On-Chip Millennium
+ * (c) 1999 Machine Vision Holdings, Inc.
+ * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
+ *
+ * $Id: doc2001.c,v 1.48 2005/01/05 18:05:12 dwmw2 Exp $
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/doc2000.h>
+
+/* #define ECC_DEBUG */
+
+/* I have no idea why some DoC chips can not use memcop_form|to_io().
+ * This may be due to the different revisions of the ASIC controller built-in or
+ * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
+ * this:*/
+#undef USE_MEMCPY
+
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+		    size_t *retlen, u_char *buf);
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf);
+static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf, u_char *eccbuf,
+			struct nand_oobinfo *oobsel);
+static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
+			 size_t *retlen, const u_char *buf, u_char *eccbuf,
+			 struct nand_oobinfo *oobsel);
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			size_t *retlen, u_char *buf);
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			 size_t *retlen, const u_char *buf);
+static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
+
+static struct mtd_info *docmillist = NULL;
+
+/* Perform the required delay cycles by reading from the NOP register */
+static void DoC_Delay(void __iomem * docptr, unsigned short cycles)
+{
+	volatile char dummy;
+	int i;
+
+	for (i = 0; i < cycles; i++)
+		dummy = ReadDOC(docptr, NOP);
+}
+
+/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
+static int _DoC_WaitReady(void __iomem * docptr)
+{
+	unsigned short c = 0xffff;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "_DoC_WaitReady called for out-of-line wait\n");
+
+	/* Out-of-line routine to wait for chip response */
+	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
+		;
+
+	if (c == 0)
+		DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+
+	return (c == 0);
+}
+
+static inline int DoC_WaitReady(void __iomem * docptr)
+{
+	/* This is inline, to optimise the common case, where it's ready instantly */
+	int ret = 0;
+
+	/* 4 read form NOP register should be issued in prior to the read from CDSNControl
+	   see Software Requirement 11.4 item 2. */
+	DoC_Delay(docptr, 4);
+
+	if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
+		/* Call the out-of-line routine to wait */
+		ret = _DoC_WaitReady(docptr);
+
+	/* issue 2 read from NOP register after reading from CDSNControl register
+	   see Software Requirement 11.4 item 2. */
+	DoC_Delay(docptr, 2);
+
+	return ret;
+}
+
+/* DoC_Command: Send a flash command to the flash chip through the CDSN IO register
+   with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
+   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
+
+static inline void DoC_Command(void __iomem * docptr, unsigned char command,
+			       unsigned char xtraflags)
+{
+	/* Assert the CLE (Command Latch Enable) line to the flash chip */
+	WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
+	DoC_Delay(docptr, 4);
+
+	/* Send the command */
+	WriteDOC(command, docptr, Mil_CDSN_IO);
+	WriteDOC(0x00, docptr, WritePipeTerm);
+
+	/* Lower the CLE line */
+	WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
+	DoC_Delay(docptr, 4);
+}
+
+/* DoC_Address: Set the current address for the flash chip through the CDSN IO register
+   with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
+   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
+
+static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs,
+			       unsigned char xtraflags1, unsigned char xtraflags2)
+{
+	/* Assert the ALE (Address Latch Enable) line to the flash chip */
+	WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
+	DoC_Delay(docptr, 4);
+
+	/* Send the address */
+	switch (numbytes)
+	    {
+	    case 1:
+		    /* Send single byte, bits 0-7. */
+		    WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
+		    WriteDOC(0x00, docptr, WritePipeTerm);
+		    break;
+	    case 2:
+		    /* Send bits 9-16 followed by 17-23 */
+		    WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
+		    WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
+		    WriteDOC(0x00, docptr, WritePipeTerm);
+		break;
+	    case 3:
+		    /* Send 0-7, 9-16, then 17-23 */
+		    WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
+		    WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
+		    WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
+		    WriteDOC(0x00, docptr, WritePipeTerm);
+		break;
+	    default:
+		return;
+	    }
+
+	/* Lower the ALE line */
+	WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl);
+	DoC_Delay(docptr, 4);
+}
+
+/* DoC_SelectChip: Select a given flash chip within the current floor */
+static int DoC_SelectChip(void __iomem * docptr, int chip)
+{
+	/* Select the individual flash chip requested */
+	WriteDOC(chip, docptr, CDSNDeviceSelect);
+	DoC_Delay(docptr, 4);
+
+	/* Wait for it to be ready */
+	return DoC_WaitReady(docptr);
+}
+
+/* DoC_SelectFloor: Select a given floor (bank of flash chips) */
+static int DoC_SelectFloor(void __iomem * docptr, int floor)
+{
+	/* Select the floor (bank) of chips required */
+	WriteDOC(floor, docptr, FloorSelect);
+
+	/* Wait for the chip to be ready */
+	return DoC_WaitReady(docptr);
+}
+
+/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
+static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
+{
+	int mfr, id, i, j;
+	volatile char dummy;
+
+	/* Page in the required floor/chip
+	   FIXME: is this supported by Millennium ?? */
+	DoC_SelectFloor(doc->virtadr, floor);
+	DoC_SelectChip(doc->virtadr, chip);
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP);
+	DoC_WaitReady(doc->virtadr);
+
+	/* Read the NAND chip ID: 1. Send ReadID command */ 
+	DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP);
+
+	/* Read the NAND chip ID: 2. Send address byte zero */ 
+	DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00);
+
+	/* Read the manufacturer and device id codes of the flash device through
+	   CDSN IO register see Software Requirement 11.4 item 5.*/
+	dummy = ReadDOC(doc->virtadr, ReadPipeInit);
+	DoC_Delay(doc->virtadr, 2);
+	mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO);
+
+	DoC_Delay(doc->virtadr, 2);
+	id  = ReadDOC(doc->virtadr, Mil_CDSN_IO);
+	dummy = ReadDOC(doc->virtadr, LastDataRead);
+
+	/* No response - return failure */
+	if (mfr == 0xff || mfr == 0)
+		return 0;
+
+	/* FIXME: to deal with multi-flash on multi-Millennium case more carefully */
+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+		if ( id == nand_flash_ids[i].id) {
+			/* Try to identify manufacturer */
+			for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
+				if (nand_manuf_ids[j].id == mfr)
+					break;
+			}	
+			printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, "
+			       "Chip ID: %2.2X (%s:%s)\n",
+			       mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name);
+			doc->mfr = mfr;
+			doc->id = id;
+			doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1;
+			break;
+		}
+	}
+
+	if (nand_flash_ids[i].name == NULL)
+		return 0;
+	else
+		return 1;
+}
+
+/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
+static void DoC_ScanChips(struct DiskOnChip *this)
+{
+	int floor, chip;
+	int numchips[MAX_FLOORS_MIL];
+	int ret;
+
+	this->numchips = 0;
+	this->mfr = 0;
+	this->id = 0;
+
+	/* For each floor, find the number of valid chips it contains */
+	for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) {
+		numchips[floor] = 0;
+		for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) {
+			ret = DoC_IdentChip(this, floor, chip);
+			if (ret) {
+				numchips[floor]++;
+				this->numchips++;
+			}
+		}
+	}
+	/* If there are none at all that we recognise, bail */
+	if (!this->numchips) {
+		printk("No flash chips recognised.\n");
+		return;
+	}
+
+	/* Allocate an array to hold the information for each chip */
+	this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
+	if (!this->chips){
+		printk("No memory for allocating chip info structures\n");
+		return;
+	}
+
+	/* Fill out the chip array with {floor, chipno} for each 
+	 * detected chip in the device. */
+	for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) {
+		for (chip = 0 ; chip < numchips[floor] ; chip++) {
+			this->chips[ret].floor = floor;
+			this->chips[ret].chip = chip;
+			this->chips[ret].curadr = 0;
+			this->chips[ret].curmode = 0x50;
+			ret++;
+		}
+	}
+
+	/* Calculate and print the total size of the device */
+	this->totlen = this->numchips * (1 << this->chipshift);
+	printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
+	       this->numchips ,this->totlen >> 20);
+}
+
+static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
+{
+	int tmp1, tmp2, retval;
+
+	if (doc1->physadr == doc2->physadr)
+		return 1;
+
+	/* Use the alias resolution register which was set aside for this
+	 * purpose. If it's value is the same on both chips, they might
+	 * be the same chip, and we write to one and check for a change in
+	 * the other. It's unclear if this register is usuable in the
+	 * DoC 2000 (it's in the Millenium docs), but it seems to work. */
+	tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
+	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
+	if (tmp1 != tmp2)
+		return 0;
+	
+	WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution);
+	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
+	if (tmp2 == (tmp1+1) % 0xff)
+		retval = 1;
+	else
+		retval = 0;
+
+	/* Restore register contents.  May not be necessary, but do it just to
+	 * be safe. */
+	WriteDOC(tmp1, doc1->virtadr, AliasResolution);
+
+	return retval;
+}
+
+static const char im_name[] = "DoCMil_init";
+
+/* This routine is made available to other mtd code via
+ * inter_module_register.  It must only be accessed through
+ * inter_module_get which will bump the use count of this module.  The
+ * addresses passed back in mtd are valid as long as the use count of
+ * this module is non-zero, i.e. between inter_module_get and
+ * inter_module_put.  Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
+ */
+static void DoCMil_init(struct mtd_info *mtd)
+{
+	struct DiskOnChip *this = mtd->priv;
+	struct DiskOnChip *old = NULL;
+
+	/* We must avoid being called twice for the same device. */
+	if (docmillist)
+		old = docmillist->priv;
+
+	while (old) {
+		if (DoCMil_is_alias(this, old)) {
+			printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at "
+			       "0x%lX - already configured\n", this->physadr);
+			iounmap(this->virtadr);
+			kfree(mtd);
+			return;
+		}
+		if (old->nextdoc)
+			old = old->nextdoc->priv;
+		else
+			old = NULL;
+	}
+
+	mtd->name = "DiskOnChip Millennium";
+	printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n",
+	       this->physadr);
+
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
+	mtd->size = 0;
+
+	/* FIXME: erase size is not always 8KiB */
+	mtd->erasesize = 0x2000;
+
+	mtd->oobblock = 512;
+	mtd->oobsize = 16;
+	mtd->owner = THIS_MODULE;
+	mtd->erase = doc_erase;
+	mtd->point = NULL;
+	mtd->unpoint = NULL;
+	mtd->read = doc_read;
+	mtd->write = doc_write;
+	mtd->read_ecc = doc_read_ecc;
+	mtd->write_ecc = doc_write_ecc;
+	mtd->read_oob = doc_read_oob;
+	mtd->write_oob = doc_write_oob;
+	mtd->sync = NULL;
+
+	this->totlen = 0;
+	this->numchips = 0;
+	this->curfloor = -1;
+	this->curchip = -1;
+
+	/* Ident all the chips present. */
+	DoC_ScanChips(this);
+
+	if (!this->totlen) {
+		kfree(mtd);
+		iounmap(this->virtadr);
+	} else {
+		this->nextdoc = docmillist;
+		docmillist = mtd;
+		mtd->size  = this->totlen;
+		add_mtd_device(mtd);
+		return;
+	}
+}
+
+static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
+		     size_t *retlen, u_char *buf)
+{
+	/* Just a special case of doc_read_ecc */
+	return doc_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
+}
+
+static int doc_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
+			 size_t *retlen, u_char *buf, u_char *eccbuf,
+			 struct nand_oobinfo *oobsel)
+{
+	int i, ret;
+	volatile char dummy;
+	unsigned char syndrome[6];
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
+
+	/* Don't allow read past end of device */
+	if (from >= this->totlen)
+		return -EINVAL;
+
+	/* Don't allow a single read to cross a 512-byte block boundary */
+	if (from + len > ((from | 0x1ff) + 1)) 
+		len = ((from | 0x1ff) + 1) - from;
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* issue the Read0 or Read1 command depend on which half of the page
+	   we are accessing. Polling the Flash Ready bit after issue 3 bytes
+	   address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/
+	DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP);
+	DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00);
+	DoC_WaitReady(docptr);
+
+	if (eccbuf) {
+		/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
+		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC (DOC_ECC_EN, docptr, ECCConf);
+	} else {
+		/* disable the ECC engine */
+		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
+	}
+
+	/* Read the data via the internal pipeline through CDSN IO register,
+	   see Pipelined Read Operations 11.3 */
+	dummy = ReadDOC(docptr, ReadPipeInit);
+#ifndef USE_MEMCPY
+	for (i = 0; i < len-1; i++) {
+		/* N.B. you have to increase the source address in this way or the
+		   ECC logic will not work properly */
+		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
+	}
+#else
+	memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
+#endif
+	buf[len - 1] = ReadDOC(docptr, LastDataRead);
+
+	/* Let the caller know we completed it */
+	*retlen = len;
+        ret = 0;
+
+	if (eccbuf) {
+		/* Read the ECC data from Spare Data Area,
+		   see Reed-Solomon EDC/ECC 11.1 */
+		dummy = ReadDOC(docptr, ReadPipeInit);
+#ifndef USE_MEMCPY
+		for (i = 0; i < 5; i++) {
+			/* N.B. you have to increase the source address in this way or the
+			   ECC logic will not work properly */
+			eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
+		}
+#else
+		memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5);
+#endif
+		eccbuf[5] = ReadDOC(docptr, LastDataRead);
+
+		/* Flush the pipeline */
+		dummy = ReadDOC(docptr, ECCConf);
+		dummy = ReadDOC(docptr, ECCConf);
+
+		/* Check the ECC Status */
+		if (ReadDOC(docptr, ECCConf) & 0x80) {
+                        int nb_errors;
+			/* There was an ECC error */
+#ifdef ECC_DEBUG
+			printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
+#endif
+			/* Read the ECC syndrom through the DiskOnChip ECC logic.
+			   These syndrome will be all ZERO when there is no error */
+			for (i = 0; i < 6; i++) {
+				syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
+			}
+                        nb_errors = doc_decode_ecc(buf, syndrome);
+#ifdef ECC_DEBUG
+			printk("ECC Errors corrected: %x\n", nb_errors);
+#endif
+                        if (nb_errors < 0) {
+				/* We return error, but have actually done the read. Not that
+				   this can be told to user-space, via sys_read(), but at least
+				   MTD-aware stuff can know about it by checking *retlen */
+				ret = -EIO;
+                        }
+		}
+
+#ifdef PSYCHO_DEBUG
+		printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+		       (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
+		       eccbuf[4], eccbuf[5]);
+#endif
+
+		/* disable the ECC engine */
+		WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
+	}
+
+	return ret;
+}
+
+static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
+		      size_t *retlen, const u_char *buf)
+{
+	char eccbuf[6];
+	return doc_write_ecc(mtd, to, len, retlen, buf, eccbuf, NULL);
+}
+
+static int doc_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
+			  size_t *retlen, const u_char *buf, u_char *eccbuf,
+			 struct nand_oobinfo *oobsel)
+{
+	int i,ret = 0;
+	volatile char dummy;
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[to >> (this->chipshift)];
+
+	/* Don't allow write past end of device */
+	if (to >= this->totlen)
+		return -EINVAL;
+
+#if 0
+	/* Don't allow a single write to cross a 512-byte block boundary */
+	if (to + len > ( (to | 0x1ff) + 1)) 
+		len = ((to | 0x1ff) + 1) - to;
+#else
+	/* Don't allow writes which aren't exactly one block */
+	if (to & 0x1ff || len != 0x200)
+		return -EINVAL;
+#endif
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(docptr, NAND_CMD_RESET, 0x00);
+	DoC_WaitReady(docptr);
+	/* Set device to main plane of flash */
+	DoC_Command(docptr, NAND_CMD_READ0, 0x00);
+
+	/* issue the Serial Data In command to initial the Page Program process */
+	DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
+	DoC_Address(docptr, 3, to, 0x00, 0x00);
+	DoC_WaitReady(docptr);
+
+	if (eccbuf) {
+		/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
+		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
+	} else {
+		/* disable the ECC engine */
+		WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
+	}
+
+	/* Write the data via the internal pipeline through CDSN IO register,
+	   see Pipelined Write Operations 11.2 */
+#ifndef USE_MEMCPY
+	for (i = 0; i < len; i++) {
+		/* N.B. you have to increase the source address in this way or the
+		   ECC logic will not work properly */
+		WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
+	}
+#else
+	memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
+#endif
+	WriteDOC(0x00, docptr, WritePipeTerm);
+
+	if (eccbuf) {
+		/* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic
+		   see Reed-Solomon EDC/ECC 11.1 */
+		WriteDOC(0, docptr, NOP);
+		WriteDOC(0, docptr, NOP);
+		WriteDOC(0, docptr, NOP);
+
+		/* Read the ECC data through the DiskOnChip ECC logic */
+		for (i = 0; i < 6; i++) {
+			eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i);
+		}
+
+		/* ignore the ECC engine */
+		WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
+
+#ifndef USE_MEMCPY
+		/* Write the ECC data to flash */
+		for (i = 0; i < 6; i++) {
+			/* N.B. you have to increase the source address in this way or the
+			   ECC logic will not work properly */
+			WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i);
+		}
+#else
+		memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6);
+#endif
+
+		/* write the block status BLOCK_USED (0x5555) at the end of ECC data
+		   FIXME: this is only a hack for programming the IPL area for LinuxBIOS
+		   and should be replace with proper codes in user space utilities */ 
+		WriteDOC(0x55, docptr, Mil_CDSN_IO);
+		WriteDOC(0x55, docptr, Mil_CDSN_IO + 1);
+
+		WriteDOC(0x00, docptr, WritePipeTerm);
+
+#ifdef PSYCHO_DEBUG
+		printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+		       (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
+		       eccbuf[4], eccbuf[5]);
+#endif
+	}
+
+	/* Commit the Page Program command and wait for ready
+	   see Software Requirement 11.4 item 1.*/
+	DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
+	DoC_WaitReady(docptr);
+
+	/* Read the status of the flash device through CDSN IO register
+	   see Software Requirement 11.4 item 5.*/
+	DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
+	dummy = ReadDOC(docptr, ReadPipeInit);
+	DoC_Delay(docptr, 2);
+	if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
+		printk("Error programming flash\n");
+		/* Error in programming
+		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
+		*retlen = 0;
+		ret = -EIO;
+	}
+	dummy = ReadDOC(docptr, LastDataRead);
+
+	/* Let the caller know we completed it */
+	*retlen = len;
+
+	return ret;
+}
+
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			size_t *retlen, u_char *buf)
+{
+#ifndef USE_MEMCPY
+	int i;
+#endif
+	volatile char dummy;
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* disable the ECC engine */
+	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+	WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
+
+	/* issue the Read2 command to set the pointer to the Spare Data Area.
+	   Polling the Flash Ready bit after issue 3 bytes address in
+	   Sequence Read Mode, see Software Requirement 11.4 item 1.*/
+	DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
+	DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00);
+	DoC_WaitReady(docptr);
+
+	/* Read the data out via the internal pipeline through CDSN IO register,
+	   see Pipelined Read Operations 11.3 */
+	dummy = ReadDOC(docptr, ReadPipeInit);
+#ifndef USE_MEMCPY
+	for (i = 0; i < len-1; i++) {
+		/* N.B. you have to increase the source address in this way or the
+		   ECC logic will not work properly */
+		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
+	}
+#else
+	memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
+#endif
+	buf[len - 1] = ReadDOC(docptr, LastDataRead);
+
+	*retlen = len;
+
+	return 0;
+}
+
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			 size_t *retlen, const u_char *buf)
+{
+#ifndef USE_MEMCPY
+	int i;
+#endif
+	volatile char dummy;
+	int ret = 0;
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* disable the ECC engine */
+	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
+	WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP);
+	DoC_WaitReady(docptr);
+	/* issue the Read2 command to set the pointer to the Spare Data Area. */
+	DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
+
+	/* issue the Serial Data In command to initial the Page Program process */
+	DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
+	DoC_Address(docptr, 3, ofs, 0x00, 0x00);
+
+	/* Write the data via the internal pipeline through CDSN IO register,
+	   see Pipelined Write Operations 11.2 */
+#ifndef USE_MEMCPY
+	for (i = 0; i < len; i++) {
+		/* N.B. you have to increase the source address in this way or the
+		   ECC logic will not work properly */
+		WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
+	}
+#else
+	memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
+#endif
+	WriteDOC(0x00, docptr, WritePipeTerm);
+
+	/* Commit the Page Program command and wait for ready
+	   see Software Requirement 11.4 item 1.*/
+	DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
+	DoC_WaitReady(docptr);
+
+	/* Read the status of the flash device through CDSN IO register
+	   see Software Requirement 11.4 item 5.*/
+	DoC_Command(docptr, NAND_CMD_STATUS, 0x00);
+	dummy = ReadDOC(docptr, ReadPipeInit);
+	DoC_Delay(docptr, 2);
+	if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
+		printk("Error programming oob data\n");
+		/* FIXME: implement Bad Block Replacement (in nftl.c ??) */
+		*retlen = 0;
+		ret = -EIO;
+	}
+	dummy = ReadDOC(docptr, LastDataRead);
+
+	*retlen = len;
+
+	return ret;
+}
+
+int doc_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+	volatile char dummy;
+	struct DiskOnChip *this = mtd->priv;
+	__u32 ofs = instr->addr;
+	__u32 len = instr->len;
+	void __iomem *docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+
+	if (len != mtd->erasesize) 
+		printk(KERN_WARNING "Erase not right size (%x != %x)n",
+		       len, mtd->erasesize);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	instr->state = MTD_ERASE_PENDING;
+
+	/* issue the Erase Setup command */
+	DoC_Command(docptr, NAND_CMD_ERASE1, 0x00);
+	DoC_Address(docptr, 2, ofs, 0x00, 0x00);
+
+	/* Commit the Erase Start command and wait for ready
+	   see Software Requirement 11.4 item 1.*/
+	DoC_Command(docptr, NAND_CMD_ERASE2, 0x00);
+	DoC_WaitReady(docptr);
+
+	instr->state = MTD_ERASING;
+
+	/* Read the status of the flash device through CDSN IO register
+	   see Software Requirement 11.4 item 5.
+	   FIXME: it seems that we are not wait long enough, some blocks are not
+	   erased fully */
+	DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
+	dummy = ReadDOC(docptr, ReadPipeInit);
+	DoC_Delay(docptr, 2);
+	if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
+		printk("Error Erasing at 0x%x\n", ofs);
+		/* There was an error
+		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
+		instr->state = MTD_ERASE_FAILED;
+	} else
+		instr->state = MTD_ERASE_DONE;
+	dummy = ReadDOC(docptr, LastDataRead);
+
+	mtd_erase_callback(instr);
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * Module stuff
+ *
+ ****************************************************************************/
+
+static int __init init_doc2001(void)
+{
+	inter_module_register(im_name, THIS_MODULE, &DoCMil_init);
+	return 0;
+}
+
+static void __exit cleanup_doc2001(void)
+{
+	struct mtd_info *mtd;
+	struct DiskOnChip *this;
+
+	while ((mtd=docmillist)) {
+		this = mtd->priv;
+		docmillist = this->nextdoc;
+			
+		del_mtd_device(mtd);
+			
+		iounmap(this->virtadr);
+		kfree(this->chips);
+		kfree(mtd);
+	}
+	inter_module_unregister(im_name);
+}
+
+module_exit(cleanup_doc2001);
+module_init(init_doc2001);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
+MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium");
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
new file mode 100644
index 000000000000..ed47bafb2ce2
--- /dev/null
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -0,0 +1,1154 @@
+/*
+ * Linux driver for Disk-On-Chip Millennium Plus
+ *
+ * (c) 2002-2003 Greg Ungerer <gerg@snapgear.com>
+ * (c) 2002-2003 SnapGear Inc
+ * (c) 1999 Machine Vision Holdings, Inc.
+ * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
+ *
+ * $Id: doc2001plus.c,v 1.13 2005/01/05 18:05:12 dwmw2 Exp $
+ *
+ * Released under GPL
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/doc2000.h>
+
+/* #define ECC_DEBUG */
+
+/* I have no idea why some DoC chips can not use memcop_form|to_io().
+ * This may be due to the different revisions of the ASIC controller built-in or
+ * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
+ * this:*/
+#undef USE_MEMCPY
+
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf);
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf);
+static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf, u_char *eccbuf,
+		struct nand_oobinfo *oobsel);
+static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf, u_char *eccbuf,
+		struct nand_oobinfo *oobsel);
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+		size_t *retlen, u_char *buf);
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+		size_t *retlen, const u_char *buf);
+static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
+
+static struct mtd_info *docmilpluslist = NULL;
+
+
+/* Perform the required delay cycles by writing to the NOP register */
+static void DoC_Delay(void __iomem * docptr, int cycles)
+{
+	int i;
+
+	for (i = 0; (i < cycles); i++)
+		WriteDOC(0, docptr, Mplus_NOP);
+}
+
+#define	CDSN_CTRL_FR_B_MASK	(CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1)
+
+/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
+static int _DoC_WaitReady(void __iomem * docptr)
+{
+	unsigned int c = 0xffff;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "_DoC_WaitReady called for out-of-line wait\n");
+
+	/* Out-of-line routine to wait for chip response */
+	while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c)
+		;
+
+	if (c == 0)
+		DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+
+	return (c == 0);
+}
+
+static inline int DoC_WaitReady(void __iomem * docptr)
+{
+	/* This is inline, to optimise the common case, where it's ready instantly */
+	int ret = 0;
+
+	/* read form NOP register should be issued prior to the read from CDSNControl
+	   see Software Requirement 11.4 item 2. */
+	DoC_Delay(docptr, 4);
+
+	if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK)
+		/* Call the out-of-line routine to wait */
+		ret = _DoC_WaitReady(docptr);
+
+	return ret;
+}
+
+/* For some reason the Millennium Plus seems to occassionally put itself
+ * into reset mode. For me this happens randomly, with no pattern that I
+ * can detect. M-systems suggest always check this on any block level
+ * operation and setting to normal mode if in reset mode.
+ */
+static inline void DoC_CheckASIC(void __iomem * docptr)
+{
+	/* Make sure the DoC is in normal mode */
+	if ((ReadDOC(docptr, Mplus_DOCControl) & DOC_MODE_NORMAL) == 0) {
+		WriteDOC((DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_DOCControl);
+		WriteDOC(~(DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_CtrlConfirm);
+	}
+}
+
+/* DoC_Command: Send a flash command to the flash chip through the Flash
+ * command register. Need 2 Write Pipeline Terminates to complete send.
+ */
+static inline void DoC_Command(void __iomem * docptr, unsigned char command,
+			       unsigned char xtraflags)
+{
+	WriteDOC(command, docptr, Mplus_FlashCmd);
+	WriteDOC(command, docptr, Mplus_WritePipeTerm);
+	WriteDOC(command, docptr, Mplus_WritePipeTerm);
+}
+
+/* DoC_Address: Set the current address for the flash chip through the Flash
+ * Address register. Need 2 Write Pipeline Terminates to complete send.
+ */
+static inline void DoC_Address(struct DiskOnChip *doc, int numbytes,
+			       unsigned long ofs, unsigned char xtraflags1,
+			       unsigned char xtraflags2)
+{
+	void __iomem * docptr = doc->virtadr;
+
+	/* Allow for possible Mill Plus internal flash interleaving */
+	ofs >>= doc->interleave;
+
+	switch (numbytes) {
+	case 1:
+		/* Send single byte, bits 0-7. */
+		WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress);
+		break;
+	case 2:
+		/* Send bits 9-16 followed by 17-23 */
+		WriteDOC((ofs >> 9)  & 0xff, docptr, Mplus_FlashAddress);
+		WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress);
+		break;
+	case 3:
+		/* Send 0-7, 9-16, then 17-23 */
+		WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress);
+		WriteDOC((ofs >> 9)  & 0xff, docptr, Mplus_FlashAddress);
+		WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress);
+		break;
+	default:
+		return;
+	}
+
+	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+}
+
+/* DoC_SelectChip: Select a given flash chip within the current floor */
+static int DoC_SelectChip(void __iomem * docptr, int chip)
+{
+	/* No choice for flash chip on Millennium Plus */
+	return 0;
+}
+
+/* DoC_SelectFloor: Select a given floor (bank of flash chips) */
+static int DoC_SelectFloor(void __iomem * docptr, int floor)
+{
+	WriteDOC((floor & 0x3), docptr, Mplus_DeviceSelect);
+	return 0;
+}
+
+/*
+ * Translate the given offset into the appropriate command and offset.
+ * This does the mapping using the 16bit interleave layout defined by
+ * M-Systems, and looks like this for a sector pair:
+ *  +-----------+-------+-------+-------+--------------+---------+-----------+
+ *  | 0 --- 511 |512-517|518-519|520-521| 522 --- 1033 |1034-1039|1040 - 1055|
+ *  +-----------+-------+-------+-------+--------------+---------+-----------+
+ *  | Data 0    | ECC 0 |Flags0 |Flags1 | Data 1       |ECC 1    | OOB 1 + 2 |
+ *  +-----------+-------+-------+-------+--------------+---------+-----------+
+ */
+/* FIXME: This lives in INFTL not here. Other users of flash devices
+   may not want it */
+static unsigned int DoC_GetDataOffset(struct mtd_info *mtd, loff_t *from)
+{
+	struct DiskOnChip *this = mtd->priv;
+
+	if (this->interleave) {
+		unsigned int ofs = *from & 0x3ff;
+		unsigned int cmd;
+
+		if (ofs < 512) {
+			cmd = NAND_CMD_READ0;
+			ofs &= 0x1ff;
+		} else if (ofs < 1014) {
+			cmd = NAND_CMD_READ1;
+			ofs = (ofs & 0x1ff) + 10;
+		} else {
+			cmd = NAND_CMD_READOOB;
+			ofs = ofs - 1014;
+		}
+
+		*from = (*from & ~0x3ff) | ofs;
+		return cmd;
+	} else {
+		/* No interleave */
+		if ((*from) & 0x100)
+			return NAND_CMD_READ1;
+		return NAND_CMD_READ0;
+	}
+}
+
+static unsigned int DoC_GetECCOffset(struct mtd_info *mtd, loff_t *from)
+{
+	unsigned int ofs, cmd;
+
+	if (*from & 0x200) {
+		cmd = NAND_CMD_READOOB;
+		ofs = 10 + (*from & 0xf);
+	} else {
+		cmd = NAND_CMD_READ1;
+		ofs = (*from & 0xf);
+	}
+
+	*from = (*from & ~0x3ff) | ofs;
+	return cmd;
+}
+
+static unsigned int DoC_GetFlagsOffset(struct mtd_info *mtd, loff_t *from)
+{
+	unsigned int ofs, cmd;
+
+	cmd = NAND_CMD_READ1;
+	ofs = (*from & 0x200) ? 8 : 6;
+	*from = (*from & ~0x3ff) | ofs;
+	return cmd;
+}
+
+static unsigned int DoC_GetHdrOffset(struct mtd_info *mtd, loff_t *from)
+{
+	unsigned int ofs, cmd;
+
+	cmd = NAND_CMD_READOOB;
+	ofs = (*from & 0x200) ? 24 : 16;
+	*from = (*from & ~0x3ff) | ofs;
+	return cmd;
+}
+
+static inline void MemReadDOC(void __iomem * docptr, unsigned char *buf, int len)
+{
+#ifndef USE_MEMCPY
+	int i;
+	for (i = 0; i < len; i++)
+		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
+#else
+	memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len);
+#endif
+}
+
+static inline void MemWriteDOC(void __iomem * docptr, unsigned char *buf, int len)
+{
+#ifndef USE_MEMCPY
+	int i;
+	for (i = 0; i < len; i++)
+		WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
+#else
+	memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
+#endif
+}
+
+/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
+static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
+{
+	int mfr, id, i, j;
+	volatile char dummy;
+	void __iomem * docptr = doc->virtadr;
+
+	/* Page in the required floor/chip */
+	DoC_SelectFloor(docptr, floor);
+	DoC_SelectChip(docptr, chip);
+
+	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
+	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(docptr, NAND_CMD_RESET, 0);
+	DoC_WaitReady(docptr);
+
+	/* Read the NAND chip ID: 1. Send ReadID command */ 
+	DoC_Command(docptr, NAND_CMD_READID, 0);
+
+	/* Read the NAND chip ID: 2. Send address byte zero */ 
+	DoC_Address(doc, 1, 0x00, 0, 0x00);
+
+	WriteDOC(0, docptr, Mplus_FlashControl);
+	DoC_WaitReady(docptr);
+
+	/* Read the manufacturer and device id codes of the flash device through
+	   CDSN IO register see Software Requirement 11.4 item 5.*/
+	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+
+	mfr = ReadDOC(docptr, Mil_CDSN_IO);
+	if (doc->interleave)
+		dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */
+
+	id  = ReadDOC(docptr, Mil_CDSN_IO);
+	if (doc->interleave)
+		dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */
+
+	dummy = ReadDOC(docptr, Mplus_LastDataRead);
+	dummy = ReadDOC(docptr, Mplus_LastDataRead);
+
+	/* Disable flash internally */
+	WriteDOC(0, docptr, Mplus_FlashSelect);
+
+	/* No response - return failure */
+	if (mfr == 0xff || mfr == 0)
+		return 0;
+
+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+		if (id == nand_flash_ids[i].id) {
+			/* Try to identify manufacturer */
+			for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
+				if (nand_manuf_ids[j].id == mfr)
+					break;
+			}
+			printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, "
+			       "Chip ID: %2.2X (%s:%s)\n", mfr, id,
+			       nand_manuf_ids[j].name, nand_flash_ids[i].name);
+			doc->mfr = mfr;
+			doc->id = id;
+			doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1;
+			doc->erasesize = nand_flash_ids[i].erasesize << doc->interleave;
+			break;
+		}
+	}
+
+	if (nand_flash_ids[i].name == NULL)
+		return 0;
+	return 1;
+}
+
+/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
+static void DoC_ScanChips(struct DiskOnChip *this)
+{
+	int floor, chip;
+	int numchips[MAX_FLOORS_MPLUS];
+	int ret;
+
+	this->numchips = 0;
+	this->mfr = 0;
+	this->id = 0;
+
+	/* Work out the intended interleave setting */
+	this->interleave = 0;
+	if (this->ChipID == DOC_ChipID_DocMilPlus32)
+		this->interleave = 1;
+
+	/* Check the ASIC agrees */
+	if ( (this->interleave << 2) != 
+	     (ReadDOC(this->virtadr, Mplus_Configuration) & 4)) {
+		u_char conf = ReadDOC(this->virtadr, Mplus_Configuration);
+		printk(KERN_NOTICE "Setting DiskOnChip Millennium Plus interleave to %s\n",
+		       this->interleave?"on (16-bit)":"off (8-bit)");
+		conf ^= 4;
+		WriteDOC(conf, this->virtadr, Mplus_Configuration);
+	}
+
+	/* For each floor, find the number of valid chips it contains */
+	for (floor = 0,ret = 1; floor < MAX_FLOORS_MPLUS; floor++) {
+		numchips[floor] = 0;
+		for (chip = 0; chip < MAX_CHIPS_MPLUS && ret != 0; chip++) {
+			ret = DoC_IdentChip(this, floor, chip);
+			if (ret) {
+				numchips[floor]++;
+				this->numchips++;
+			}
+		}
+	}
+	/* If there are none at all that we recognise, bail */
+	if (!this->numchips) {
+		printk("No flash chips recognised.\n");
+		return;
+	}
+
+	/* Allocate an array to hold the information for each chip */
+	this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
+	if (!this->chips){
+		printk("MTD: No memory for allocating chip info structures\n");
+		return;
+	}
+
+	/* Fill out the chip array with {floor, chipno} for each 
+	 * detected chip in the device. */
+	for (floor = 0, ret = 0; floor < MAX_FLOORS_MPLUS; floor++) {
+		for (chip = 0 ; chip < numchips[floor] ; chip++) {
+			this->chips[ret].floor = floor;
+			this->chips[ret].chip = chip;
+			this->chips[ret].curadr = 0;
+			this->chips[ret].curmode = 0x50;
+			ret++;
+		}
+	}
+
+	/* Calculate and print the total size of the device */
+	this->totlen = this->numchips * (1 << this->chipshift);
+	printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
+	       this->numchips ,this->totlen >> 20);
+}
+
+static int DoCMilPlus_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
+{
+	int tmp1, tmp2, retval;
+
+	if (doc1->physadr == doc2->physadr)
+		return 1;
+
+	/* Use the alias resolution register which was set aside for this
+	 * purpose. If it's value is the same on both chips, they might
+	 * be the same chip, and we write to one and check for a change in
+	 * the other. It's unclear if this register is usuable in the
+	 * DoC 2000 (it's in the Millennium docs), but it seems to work. */
+	tmp1 = ReadDOC(doc1->virtadr, Mplus_AliasResolution);
+	tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution);
+	if (tmp1 != tmp2)
+		return 0;
+	
+	WriteDOC((tmp1+1) % 0xff, doc1->virtadr, Mplus_AliasResolution);
+	tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution);
+	if (tmp2 == (tmp1+1) % 0xff)
+		retval = 1;
+	else
+		retval = 0;
+
+	/* Restore register contents.  May not be necessary, but do it just to
+	 * be safe. */
+	WriteDOC(tmp1, doc1->virtadr, Mplus_AliasResolution);
+
+	return retval;
+}
+
+static const char im_name[] = "DoCMilPlus_init";
+
+/* This routine is made available to other mtd code via
+ * inter_module_register.  It must only be accessed through
+ * inter_module_get which will bump the use count of this module.  The
+ * addresses passed back in mtd are valid as long as the use count of
+ * this module is non-zero, i.e. between inter_module_get and
+ * inter_module_put.  Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
+ */
+static void DoCMilPlus_init(struct mtd_info *mtd)
+{
+	struct DiskOnChip *this = mtd->priv;
+	struct DiskOnChip *old = NULL;
+
+	/* We must avoid being called twice for the same device. */
+	if (docmilpluslist)
+		old = docmilpluslist->priv;
+
+	while (old) {
+		if (DoCMilPlus_is_alias(this, old)) {
+			printk(KERN_NOTICE "Ignoring DiskOnChip Millennium "
+				"Plus at 0x%lX - already configured\n",
+				this->physadr);
+			iounmap(this->virtadr);
+			kfree(mtd);
+			return;
+		}
+		if (old->nextdoc)
+			old = old->nextdoc->priv;
+		else
+			old = NULL;
+	}
+
+	mtd->name = "DiskOnChip Millennium Plus";
+	printk(KERN_NOTICE "DiskOnChip Millennium Plus found at "
+		"address 0x%lX\n", this->physadr);
+
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
+	mtd->size = 0;
+
+	mtd->erasesize = 0;
+	mtd->oobblock = 512;
+	mtd->oobsize = 16;
+	mtd->owner = THIS_MODULE;
+	mtd->erase = doc_erase;
+	mtd->point = NULL;
+	mtd->unpoint = NULL;
+	mtd->read = doc_read;
+	mtd->write = doc_write;
+	mtd->read_ecc = doc_read_ecc;
+	mtd->write_ecc = doc_write_ecc;
+	mtd->read_oob = doc_read_oob;
+	mtd->write_oob = doc_write_oob;
+	mtd->sync = NULL;
+
+	this->totlen = 0;
+	this->numchips = 0;
+	this->curfloor = -1;
+	this->curchip = -1;
+
+	/* Ident all the chips present. */
+	DoC_ScanChips(this);
+
+	if (!this->totlen) {
+		kfree(mtd);
+		iounmap(this->virtadr);
+	} else {
+		this->nextdoc = docmilpluslist;
+		docmilpluslist = mtd;
+		mtd->size  = this->totlen;
+		mtd->erasesize = this->erasesize;
+		add_mtd_device(mtd);
+		return;
+	}
+}
+
+#if 0
+static int doc_dumpblk(struct mtd_info *mtd, loff_t from)
+{
+	int i;
+	loff_t fofs;
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem * docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
+	unsigned char *bp, buf[1056];
+	char c[32];
+
+	from &= ~0x3ff;
+
+	/* Don't allow read past end of device */
+	if (from >= this->totlen)
+		return -EINVAL;
+
+	DoC_CheckASIC(docptr);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
+	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(docptr, NAND_CMD_RESET, 0);
+	DoC_WaitReady(docptr);
+
+	fofs = from;
+	DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0);
+	DoC_Address(this, 3, fofs, 0, 0x00);
+	WriteDOC(0, docptr, Mplus_FlashControl);
+	DoC_WaitReady(docptr);
+
+	/* disable the ECC engine */
+	WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+
+	/* Read the data via the internal pipeline through CDSN IO
+	   register, see Pipelined Read Operations 11.3 */
+	MemReadDOC(docptr, buf, 1054);
+	buf[1054] = ReadDOC(docptr, Mplus_LastDataRead);
+	buf[1055] = ReadDOC(docptr, Mplus_LastDataRead);
+
+	memset(&c[0], 0, sizeof(c));
+	printk("DUMP OFFSET=%x:\n", (int)from);
+
+        for (i = 0, bp = &buf[0]; (i < 1056); i++) {
+                if ((i % 16) == 0)
+                        printk("%08x: ", i);
+                printk(" %02x", *bp);
+                c[(i & 0xf)] = ((*bp >= 0x20) && (*bp <= 0x7f)) ? *bp : '.';
+                bp++;
+                if (((i + 1) % 16) == 0)
+                        printk("    %s\n", c);
+        }
+	printk("\n");
+
+	/* Disable flash internally */
+	WriteDOC(0, docptr, Mplus_FlashSelect);
+
+	return 0;
+}
+#endif
+
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+		    size_t *retlen, u_char *buf)
+{
+	/* Just a special case of doc_read_ecc */
+	return doc_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
+}
+
+static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf, u_char *eccbuf,
+			struct nand_oobinfo *oobsel)
+{
+	int ret, i;
+	volatile char dummy;
+	loff_t fofs;
+	unsigned char syndrome[6];
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem * docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
+
+	/* Don't allow read past end of device */
+	if (from >= this->totlen)
+		return -EINVAL;
+
+	/* Don't allow a single read to cross a 512-byte block boundary */
+	if (from + len > ((from | 0x1ff) + 1)) 
+		len = ((from | 0x1ff) + 1) - from;
+
+	DoC_CheckASIC(docptr);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
+	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(docptr, NAND_CMD_RESET, 0);
+	DoC_WaitReady(docptr);
+
+	fofs = from;
+	DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0);
+	DoC_Address(this, 3, fofs, 0, 0x00);
+	WriteDOC(0, docptr, Mplus_FlashControl);
+	DoC_WaitReady(docptr);
+
+	if (eccbuf) {
+		/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
+		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+		WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf);
+	} else {
+		/* disable the ECC engine */
+		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+	}
+
+	/* Let the caller know we completed it */
+	*retlen = len;
+        ret = 0;
+
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+
+	if (eccbuf) {
+		/* Read the data via the internal pipeline through CDSN IO
+		   register, see Pipelined Read Operations 11.3 */
+		MemReadDOC(docptr, buf, len);
+
+		/* Read the ECC data following raw data */
+		MemReadDOC(docptr, eccbuf, 4);
+		eccbuf[4] = ReadDOC(docptr, Mplus_LastDataRead);
+		eccbuf[5] = ReadDOC(docptr, Mplus_LastDataRead);
+
+		/* Flush the pipeline */
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+
+		/* Check the ECC Status */
+		if (ReadDOC(docptr, Mplus_ECCConf) & 0x80) {
+                        int nb_errors;
+			/* There was an ECC error */
+#ifdef ECC_DEBUG
+			printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
+#endif
+			/* Read the ECC syndrom through the DiskOnChip ECC logic.
+			   These syndrome will be all ZERO when there is no error */
+			for (i = 0; i < 6; i++)
+				syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
+
+                        nb_errors = doc_decode_ecc(buf, syndrome);
+#ifdef ECC_DEBUG
+			printk("ECC Errors corrected: %x\n", nb_errors);
+#endif
+                        if (nb_errors < 0) {
+				/* We return error, but have actually done the read. Not that
+				   this can be told to user-space, via sys_read(), but at least
+				   MTD-aware stuff can know about it by checking *retlen */
+#ifdef ECC_DEBUG
+			printk("%s(%d): Millennium Plus ECC error (from=0x%x:\n",
+				__FILE__, __LINE__, (int)from);
+			printk("        syndrome= %02x:%02x:%02x:%02x:%02x:"
+				"%02x\n",
+				syndrome[0], syndrome[1], syndrome[2],
+				syndrome[3], syndrome[4], syndrome[5]);
+			printk("          eccbuf= %02x:%02x:%02x:%02x:%02x:"
+				"%02x\n",
+				eccbuf[0], eccbuf[1], eccbuf[2],
+				eccbuf[3], eccbuf[4], eccbuf[5]);
+#endif
+				ret = -EIO;
+                        }
+		}
+
+#ifdef PSYCHO_DEBUG
+		printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+		       (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
+		       eccbuf[4], eccbuf[5]);
+#endif
+
+		/* disable the ECC engine */
+		WriteDOC(DOC_ECC_DIS, docptr , Mplus_ECCConf);
+	} else {
+		/* Read the data via the internal pipeline through CDSN IO
+		   register, see Pipelined Read Operations 11.3 */
+		MemReadDOC(docptr, buf, len-2);
+		buf[len-2] = ReadDOC(docptr, Mplus_LastDataRead);
+		buf[len-1] = ReadDOC(docptr, Mplus_LastDataRead);
+	}
+
+	/* Disable flash internally */
+	WriteDOC(0, docptr, Mplus_FlashSelect);
+
+	return ret;
+}
+
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf)
+{
+	char eccbuf[6];
+	return doc_write_ecc(mtd, to, len, retlen, buf, eccbuf, NULL);
+}
+
+static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
+			 size_t *retlen, const u_char *buf, u_char *eccbuf,
+			 struct nand_oobinfo *oobsel)
+{
+	int i, before, ret = 0;
+	loff_t fto;
+	volatile char dummy;
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem * docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[to >> (this->chipshift)];
+
+	/* Don't allow write past end of device */
+	if (to >= this->totlen)
+		return -EINVAL;
+
+	/* Don't allow writes which aren't exactly one block (512 bytes) */
+	if ((to & 0x1ff) || (len != 0x200))
+		return -EINVAL;
+
+	/* Determine position of OOB flags, before or after data */
+	before = (this->interleave && (to & 0x200));
+
+	DoC_CheckASIC(docptr);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
+	WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect);
+
+	/* Reset the chip, see Software Requirement 11.4 item 1. */
+	DoC_Command(docptr, NAND_CMD_RESET, 0);
+	DoC_WaitReady(docptr);
+
+	/* Set device to appropriate plane of flash */
+	fto = to;
+	WriteDOC(DoC_GetDataOffset(mtd, &fto), docptr, Mplus_FlashCmd);
+
+	/* On interleaved devices the flags for 2nd half 512 are before data */
+	if (eccbuf && before)
+		fto -= 2;
+
+	/* issue the Serial Data In command to initial the Page Program process */
+	DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
+	DoC_Address(this, 3, fto, 0x00, 0x00);
+
+	/* Disable the ECC engine */
+	WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+
+	if (eccbuf) {
+		if (before) {
+			/* Write the block status BLOCK_USED (0x5555) */
+			WriteDOC(0x55, docptr, Mil_CDSN_IO);
+			WriteDOC(0x55, docptr, Mil_CDSN_IO);
+		}
+
+		/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
+		WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf);
+	}
+
+	MemWriteDOC(docptr, (unsigned char *) buf, len);
+
+	if (eccbuf) {
+		/* Write ECC data to flash, the ECC info is generated by
+		   the DiskOnChip ECC logic see Reed-Solomon EDC/ECC 11.1 */
+		DoC_Delay(docptr, 3);
+
+		/* Read the ECC data through the DiskOnChip ECC logic */
+		for (i = 0; i < 6; i++)
+			eccbuf[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
+
+		/* disable the ECC engine */
+		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
+
+		/* Write the ECC data to flash */
+		MemWriteDOC(docptr, eccbuf, 6);
+
+		if (!before) {
+			/* Write the block status BLOCK_USED (0x5555) */
+			WriteDOC(0x55, docptr, Mil_CDSN_IO+6);
+			WriteDOC(0x55, docptr, Mil_CDSN_IO+7);
+		}
+
+#ifdef PSYCHO_DEBUG
+		printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+		       (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
+		       eccbuf[4], eccbuf[5]);
+#endif
+	}
+
+	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+
+	/* Commit the Page Program command and wait for ready
+	   see Software Requirement 11.4 item 1.*/
+	DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
+	DoC_WaitReady(docptr);
+
+	/* Read the status of the flash device through CDSN IO register
+	   see Software Requirement 11.4 item 5.*/
+	DoC_Command(docptr, NAND_CMD_STATUS, 0);
+	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+	DoC_Delay(docptr, 2);
+	if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) {
+		printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to);
+		/* Error in programming
+		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
+		*retlen = 0;
+		ret = -EIO;
+	}
+	dummy = ReadDOC(docptr, Mplus_LastDataRead);
+
+	/* Disable flash internally */
+	WriteDOC(0, docptr, Mplus_FlashSelect);
+
+	/* Let the caller know we completed it */
+	*retlen = len;
+
+	return ret;
+}
+
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	loff_t fofs, base;
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem * docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+	size_t i, size, got, want;
+
+	DoC_CheckASIC(docptr);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
+	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
+
+	/* disable the ECC engine */
+	WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+	DoC_WaitReady(docptr);
+
+	/* Maximum of 16 bytes in the OOB region, so limit read to that */
+	if (len > 16)
+		len = 16;
+	got = 0;
+	want = len;
+
+	for (i = 0; ((i < 3) && (want > 0)); i++) {
+		/* Figure out which region we are accessing... */
+		fofs = ofs;
+		base = ofs & 0xf;
+		if (!this->interleave) {
+			DoC_Command(docptr, NAND_CMD_READOOB, 0);
+			size = 16 - base;
+		} else if (base < 6) {
+			DoC_Command(docptr, DoC_GetECCOffset(mtd, &fofs), 0);
+			size = 6 - base;
+		} else if (base < 8) {
+			DoC_Command(docptr, DoC_GetFlagsOffset(mtd, &fofs), 0);
+			size = 8 - base;
+		} else {
+			DoC_Command(docptr, DoC_GetHdrOffset(mtd, &fofs), 0);
+			size = 16 - base;
+		}
+		if (size > want)
+			size = want;
+
+		/* Issue read command */
+		DoC_Address(this, 3, fofs, 0, 0x00);
+		WriteDOC(0, docptr, Mplus_FlashControl);
+		DoC_WaitReady(docptr);
+
+		ReadDOC(docptr, Mplus_ReadPipeInit);
+		ReadDOC(docptr, Mplus_ReadPipeInit);
+		MemReadDOC(docptr, &buf[got], size - 2);
+		buf[got + size - 2] = ReadDOC(docptr, Mplus_LastDataRead);
+		buf[got + size - 1] = ReadDOC(docptr, Mplus_LastDataRead);
+
+		ofs += size;
+		got += size;
+		want -= size;
+	}
+
+	/* Disable flash internally */
+	WriteDOC(0, docptr, Mplus_FlashSelect);
+
+	*retlen = len;
+	return 0;
+}
+
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
+			 size_t *retlen, const u_char *buf)
+{
+	volatile char dummy;
+	loff_t fofs, base;
+	struct DiskOnChip *this = mtd->priv;
+	void __iomem * docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+	size_t i, size, got, want;
+	int ret = 0;
+
+	DoC_CheckASIC(docptr);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
+	WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect);
+
+
+	/* Maximum of 16 bytes in the OOB region, so limit write to that */
+	if (len > 16)
+		len = 16;
+	got = 0;
+	want = len;
+
+	for (i = 0; ((i < 3) && (want > 0)); i++) {
+		/* Reset the chip, see Software Requirement 11.4 item 1. */
+		DoC_Command(docptr, NAND_CMD_RESET, 0);
+		DoC_WaitReady(docptr);
+
+		/* Figure out which region we are accessing... */
+		fofs = ofs;
+		base = ofs & 0x0f;
+		if (!this->interleave) {
+			WriteDOC(NAND_CMD_READOOB, docptr, Mplus_FlashCmd);
+			size = 16 - base;
+		} else if (base < 6) {
+			WriteDOC(DoC_GetECCOffset(mtd, &fofs), docptr, Mplus_FlashCmd);
+			size = 6 - base;
+		} else if (base < 8) {
+			WriteDOC(DoC_GetFlagsOffset(mtd, &fofs), docptr, Mplus_FlashCmd);
+			size = 8 - base;
+		} else {
+			WriteDOC(DoC_GetHdrOffset(mtd, &fofs), docptr, Mplus_FlashCmd);
+			size = 16 - base;
+		}
+		if (size > want)
+			size = want;
+
+		/* Issue the Serial Data In command to initial the Page Program process */
+		DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
+		DoC_Address(this, 3, fofs, 0, 0x00);
+
+		/* Disable the ECC engine */
+		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+
+		/* Write the data via the internal pipeline through CDSN IO
+		   register, see Pipelined Write Operations 11.2 */
+		MemWriteDOC(docptr, (unsigned char *) &buf[got], size);
+		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+
+		/* Commit the Page Program command and wait for ready
+	 	   see Software Requirement 11.4 item 1.*/
+		DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
+		DoC_WaitReady(docptr);
+
+		/* Read the status of the flash device through CDSN IO register
+		   see Software Requirement 11.4 item 5.*/
+		DoC_Command(docptr, NAND_CMD_STATUS, 0x00);
+		dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+		dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+		DoC_Delay(docptr, 2);
+		if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) {
+			printk("MTD: Error 0x%x programming oob at 0x%x\n",
+				dummy, (int)ofs);
+			/* FIXME: implement Bad Block Replacement */
+			*retlen = 0;
+			ret = -EIO;
+		}
+		dummy = ReadDOC(docptr, Mplus_LastDataRead);
+
+		ofs += size;
+		got += size;
+		want -= size;
+	}
+
+	/* Disable flash internally */
+	WriteDOC(0, docptr, Mplus_FlashSelect);
+
+	*retlen = len;
+	return ret;
+}
+
+int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	volatile char dummy;
+	struct DiskOnChip *this = mtd->priv;
+	__u32 ofs = instr->addr;
+	__u32 len = instr->len;
+	void __iomem * docptr = this->virtadr;
+	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+
+	DoC_CheckASIC(docptr);
+
+	if (len != mtd->erasesize) 
+		printk(KERN_WARNING "MTD: Erase not right size (%x != %x)n",
+		       len, mtd->erasesize);
+
+	/* Find the chip which is to be used and select it */
+	if (this->curfloor != mychip->floor) {
+		DoC_SelectFloor(docptr, mychip->floor);
+		DoC_SelectChip(docptr, mychip->chip);
+	} else if (this->curchip != mychip->chip) {
+		DoC_SelectChip(docptr, mychip->chip);
+	}
+	this->curfloor = mychip->floor;
+	this->curchip = mychip->chip;
+
+	instr->state = MTD_ERASE_PENDING;
+
+	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
+	WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect);
+
+	DoC_Command(docptr, NAND_CMD_RESET, 0x00);
+	DoC_WaitReady(docptr);
+
+	DoC_Command(docptr, NAND_CMD_ERASE1, 0);
+	DoC_Address(this, 2, ofs, 0, 0x00);
+	DoC_Command(docptr, NAND_CMD_ERASE2, 0);
+	DoC_WaitReady(docptr);
+	instr->state = MTD_ERASING;
+
+	/* Read the status of the flash device through CDSN IO register
+	   see Software Requirement 11.4 item 5. */
+	DoC_Command(docptr, NAND_CMD_STATUS, 0);
+	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
+	if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) {
+		printk("MTD: Error 0x%x erasing at 0x%x\n", dummy, ofs);
+		/* FIXME: implement Bad Block Replacement (in nftl.c ??) */
+		instr->state = MTD_ERASE_FAILED;
+	} else {
+		instr->state = MTD_ERASE_DONE;
+	}
+	dummy = ReadDOC(docptr, Mplus_LastDataRead);
+
+	/* Disable flash internally */
+	WriteDOC(0, docptr, Mplus_FlashSelect);
+
+	mtd_erase_callback(instr);
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * Module stuff
+ *
+ ****************************************************************************/
+
+static int __init init_doc2001plus(void)
+{
+	inter_module_register(im_name, THIS_MODULE, &DoCMilPlus_init);
+	return 0;
+}
+
+static void __exit cleanup_doc2001plus(void)
+{
+	struct mtd_info *mtd;
+	struct DiskOnChip *this;
+
+	while ((mtd=docmilpluslist)) {
+		this = mtd->priv;
+		docmilpluslist = this->nextdoc;
+			
+		del_mtd_device(mtd);
+			
+		iounmap(this->virtadr);
+		kfree(this->chips);
+		kfree(mtd);
+	}
+	inter_module_unregister(im_name);
+}
+
+module_exit(cleanup_doc2001plus);
+module_init(init_doc2001plus);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com> et al.");
+MODULE_DESCRIPTION("Driver for DiskOnChip Millennium Plus");
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
new file mode 100644
index 000000000000..933877ff4d88
--- /dev/null
+++ b/drivers/mtd/devices/docecc.c
@@ -0,0 +1,526 @@
+/*
+ * ECC algorithm for M-systems disk on chip. We use the excellent Reed
+ * Solmon code of Phil Karn (karn@ka9q.ampr.org) available under the
+ * GNU GPL License. The rest is simply to convert the disk on chip
+ * syndrom into a standard syndom.
+ *
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com) 
+ * Copyright (C) 2000 Netgem S.A.
+ *
+ * $Id: docecc.c,v 1.5 2003/05/21 15:15:06 dwmw2 Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <linux/mtd/compatmac.h> /* for min() in older kernels */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/doc2000.h>
+
+/* need to undef it (from asm/termbits.h) */
+#undef B0
+
+#define MM 10 /* Symbol size in bits */
+#define KK (1023-4) /* Number of data symbols per block */
+#define B0 510 /* First root of generator polynomial, alpha form */
+#define PRIM 1 /* power of alpha used to generate roots of generator poly */
+#define	NN ((1 << MM) - 1)
+
+typedef unsigned short dtype;
+
+/* 1+x^3+x^10 */
+static const int Pp[MM+1] = { 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1 };
+
+/* This defines the type used to store an element of the Galois Field
+ * used by the code. Make sure this is something larger than a char if
+ * if anything larger than GF(256) is used.
+ *
+ * Note: unsigned char will work up to GF(256) but int seems to run
+ * faster on the Pentium.
+ */
+typedef int gf;
+
+/* No legal value in index form represents zero, so
+ * we need a special value for this purpose
+ */
+#define A0	(NN)
+
+/* Compute x % NN, where NN is 2**MM - 1,
+ * without a slow divide
+ */
+static inline gf
+modnn(int x)
+{
+  while (x >= NN) {
+    x -= NN;
+    x = (x >> MM) + (x & NN);
+  }
+  return x;
+}
+
+#define	CLEAR(a,n) {\
+int ci;\
+for(ci=(n)-1;ci >=0;ci--)\
+(a)[ci] = 0;\
+}
+
+#define	COPY(a,b,n) {\
+int ci;\
+for(ci=(n)-1;ci >=0;ci--)\
+(a)[ci] = (b)[ci];\
+}
+
+#define	COPYDOWN(a,b,n) {\
+int ci;\
+for(ci=(n)-1;ci >=0;ci--)\
+(a)[ci] = (b)[ci];\
+}
+
+#define Ldec 1
+
+/* generate GF(2**m) from the irreducible polynomial p(X) in Pp[0]..Pp[m]
+   lookup tables:  index->polynomial form   alpha_to[] contains j=alpha**i;
+                   polynomial form -> index form  index_of[j=alpha**i] = i
+   alpha=2 is the primitive element of GF(2**m)
+   HARI's COMMENT: (4/13/94) alpha_to[] can be used as follows:
+        Let @ represent the primitive element commonly called "alpha" that
+   is the root of the primitive polynomial p(x). Then in GF(2^m), for any
+   0 <= i <= 2^m-2,
+        @^i = a(0) + a(1) @ + a(2) @^2 + ... + a(m-1) @^(m-1)
+   where the binary vector (a(0),a(1),a(2),...,a(m-1)) is the representation
+   of the integer "alpha_to[i]" with a(0) being the LSB and a(m-1) the MSB. Thus for
+   example the polynomial representation of @^5 would be given by the binary
+   representation of the integer "alpha_to[5]".
+                   Similarily, index_of[] can be used as follows:
+        As above, let @ represent the primitive element of GF(2^m) that is
+   the root of the primitive polynomial p(x). In order to find the power
+   of @ (alpha) that has the polynomial representation
+        a(0) + a(1) @ + a(2) @^2 + ... + a(m-1) @^(m-1)
+   we consider the integer "i" whose binary representation with a(0) being LSB
+   and a(m-1) MSB is (a(0),a(1),...,a(m-1)) and locate the entry
+   "index_of[i]". Now, @^index_of[i] is that element whose polynomial 
+    representation is (a(0),a(1),a(2),...,a(m-1)).
+   NOTE:
+        The element alpha_to[2^m-1] = 0 always signifying that the
+   representation of "@^infinity" = 0 is (0,0,0,...,0).
+        Similarily, the element index_of[0] = A0 always signifying
+   that the power of alpha which has the polynomial representation
+   (0,0,...,0) is "infinity".
+ 
+*/
+
+static void
+generate_gf(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1])
+{
+  register int i, mask;
+
+  mask = 1;
+  Alpha_to[MM] = 0;
+  for (i = 0; i < MM; i++) {
+    Alpha_to[i] = mask;
+    Index_of[Alpha_to[i]] = i;
+    /* If Pp[i] == 1 then, term @^i occurs in poly-repr of @^MM */
+    if (Pp[i] != 0)
+      Alpha_to[MM] ^= mask;	/* Bit-wise EXOR operation */
+    mask <<= 1;	/* single left-shift */
+  }
+  Index_of[Alpha_to[MM]] = MM;
+  /*
+   * Have obtained poly-repr of @^MM. Poly-repr of @^(i+1) is given by
+   * poly-repr of @^i shifted left one-bit and accounting for any @^MM
+   * term that may occur when poly-repr of @^i is shifted.
+   */
+  mask >>= 1;
+  for (i = MM + 1; i < NN; i++) {
+    if (Alpha_to[i - 1] >= mask)
+      Alpha_to[i] = Alpha_to[MM] ^ ((Alpha_to[i - 1] ^ mask) << 1);
+    else
+      Alpha_to[i] = Alpha_to[i - 1] << 1;
+    Index_of[Alpha_to[i]] = i;
+  }
+  Index_of[0] = A0;
+  Alpha_to[NN] = 0;
+}
+
+/*
+ * Performs ERRORS+ERASURES decoding of RS codes. bb[] is the content
+ * of the feedback shift register after having processed the data and
+ * the ECC.
+ *
+ * Return number of symbols corrected, or -1 if codeword is illegal
+ * or uncorrectable. If eras_pos is non-null, the detected error locations
+ * are written back. NOTE! This array must be at least NN-KK elements long.
+ * The corrected data are written in eras_val[]. They must be xor with the data
+ * to retrieve the correct data : data[erase_pos[i]] ^= erase_val[i] .
+ * 
+ * First "no_eras" erasures are declared by the calling program. Then, the
+ * maximum # of errors correctable is t_after_eras = floor((NN-KK-no_eras)/2).
+ * If the number of channel errors is not greater than "t_after_eras" the
+ * transmitted codeword will be recovered. Details of algorithm can be found
+ * in R. Blahut's "Theory ... of Error-Correcting Codes".
+
+ * Warning: the eras_pos[] array must not contain duplicate entries; decoder failure
+ * will result. The decoder *could* check for this condition, but it would involve
+ * extra time on every decoding operation.
+ * */
+static int
+eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
+            gf bb[NN - KK + 1], gf eras_val[NN-KK], int eras_pos[NN-KK], 
+            int no_eras)
+{
+  int deg_lambda, el, deg_omega;
+  int i, j, r,k;
+  gf u,q,tmp,num1,num2,den,discr_r;
+  gf lambda[NN-KK + 1], s[NN-KK + 1];	/* Err+Eras Locator poly
+					 * and syndrome poly */
+  gf b[NN-KK + 1], t[NN-KK + 1], omega[NN-KK + 1];
+  gf root[NN-KK], reg[NN-KK + 1], loc[NN-KK];
+  int syn_error, count;
+
+  syn_error = 0;
+  for(i=0;i<NN-KK;i++)
+      syn_error |= bb[i];
+
+  if (!syn_error) {
+    /* if remainder is zero, data[] is a codeword and there are no
+     * errors to correct. So return data[] unmodified
+     */
+    count = 0;
+    goto finish;
+  }
+  
+  for(i=1;i<=NN-KK;i++){
+    s[i] = bb[0];
+  }
+  for(j=1;j<NN-KK;j++){
+    if(bb[j] == 0)
+      continue;
+    tmp = Index_of[bb[j]];
+    
+    for(i=1;i<=NN-KK;i++)
+      s[i] ^= Alpha_to[modnn(tmp + (B0+i-1)*PRIM*j)];
+  }
+
+  /* undo the feedback register implicit multiplication and convert
+     syndromes to index form */
+
+  for(i=1;i<=NN-KK;i++) {
+      tmp = Index_of[s[i]];
+      if (tmp != A0)
+          tmp = modnn(tmp + 2 * KK * (B0+i-1)*PRIM);
+      s[i] = tmp;
+  }
+  
+  CLEAR(&lambda[1],NN-KK);
+  lambda[0] = 1;
+
+  if (no_eras > 0) {
+    /* Init lambda to be the erasure locator polynomial */
+    lambda[1] = Alpha_to[modnn(PRIM * eras_pos[0])];
+    for (i = 1; i < no_eras; i++) {
+      u = modnn(PRIM*eras_pos[i]);
+      for (j = i+1; j > 0; j--) {
+	tmp = Index_of[lambda[j - 1]];
+	if(tmp != A0)
+	  lambda[j] ^= Alpha_to[modnn(u + tmp)];
+      }
+    }
+#if DEBUG >= 1
+    /* Test code that verifies the erasure locator polynomial just constructed
+       Needed only for decoder debugging. */
+    
+    /* find roots of the erasure location polynomial */
+    for(i=1;i<=no_eras;i++)
+      reg[i] = Index_of[lambda[i]];
+    count = 0;
+    for (i = 1,k=NN-Ldec; i <= NN; i++,k = modnn(NN+k-Ldec)) {
+      q = 1;
+      for (j = 1; j <= no_eras; j++)
+	if (reg[j] != A0) {
+	  reg[j] = modnn(reg[j] + j);
+	  q ^= Alpha_to[reg[j]];
+	}
+      if (q != 0)
+	continue;
+      /* store root and error location number indices */
+      root[count] = i;
+      loc[count] = k;
+      count++;
+    }
+    if (count != no_eras) {
+      printf("\n lambda(x) is WRONG\n");
+      count = -1;
+      goto finish;
+    }
+#if DEBUG >= 2
+    printf("\n Erasure positions as determined by roots of Eras Loc Poly:\n");
+    for (i = 0; i < count; i++)
+      printf("%d ", loc[i]);
+    printf("\n");
+#endif
+#endif
+  }
+  for(i=0;i<NN-KK+1;i++)
+    b[i] = Index_of[lambda[i]];
+  
+  /*
+   * Begin Berlekamp-Massey algorithm to determine error+erasure
+   * locator polynomial
+   */
+  r = no_eras;
+  el = no_eras;
+  while (++r <= NN-KK) {	/* r is the step number */
+    /* Compute discrepancy at the r-th step in poly-form */
+    discr_r = 0;
+    for (i = 0; i < r; i++){
+      if ((lambda[i] != 0) && (s[r - i] != A0)) {
+	discr_r ^= Alpha_to[modnn(Index_of[lambda[i]] + s[r - i])];
+      }
+    }
+    discr_r = Index_of[discr_r];	/* Index form */
+    if (discr_r == A0) {
+      /* 2 lines below: B(x) <-- x*B(x) */
+      COPYDOWN(&b[1],b,NN-KK);
+      b[0] = A0;
+    } else {
+      /* 7 lines below: T(x) <-- lambda(x) - discr_r*x*b(x) */
+      t[0] = lambda[0];
+      for (i = 0 ; i < NN-KK; i++) {
+	if(b[i] != A0)
+	  t[i+1] = lambda[i+1] ^ Alpha_to[modnn(discr_r + b[i])];
+	else
+	  t[i+1] = lambda[i+1];
+      }
+      if (2 * el <= r + no_eras - 1) {
+	el = r + no_eras - el;
+	/*
+	 * 2 lines below: B(x) <-- inv(discr_r) *
+	 * lambda(x)
+	 */
+	for (i = 0; i <= NN-KK; i++)
+	  b[i] = (lambda[i] == 0) ? A0 : modnn(Index_of[lambda[i]] - discr_r + NN);
+      } else {
+	/* 2 lines below: B(x) <-- x*B(x) */
+	COPYDOWN(&b[1],b,NN-KK);
+	b[0] = A0;
+      }
+      COPY(lambda,t,NN-KK+1);
+    }
+  }
+
+  /* Convert lambda to index form and compute deg(lambda(x)) */
+  deg_lambda = 0;
+  for(i=0;i<NN-KK+1;i++){
+    lambda[i] = Index_of[lambda[i]];
+    if(lambda[i] != A0)
+      deg_lambda = i;
+  }
+  /*
+   * Find roots of the error+erasure locator polynomial by Chien
+   * Search
+   */
+  COPY(&reg[1],&lambda[1],NN-KK);
+  count = 0;		/* Number of roots of lambda(x) */
+  for (i = 1,k=NN-Ldec; i <= NN; i++,k = modnn(NN+k-Ldec)) {
+    q = 1;
+    for (j = deg_lambda; j > 0; j--){
+      if (reg[j] != A0) {
+	reg[j] = modnn(reg[j] + j);
+	q ^= Alpha_to[reg[j]];
+      }
+    }
+    if (q != 0)
+      continue;
+    /* store root (index-form) and error location number */
+    root[count] = i;
+    loc[count] = k;
+    /* If we've already found max possible roots,
+     * abort the search to save time
+     */
+    if(++count == deg_lambda)
+      break;
+  }
+  if (deg_lambda != count) {
+    /*
+     * deg(lambda) unequal to number of roots => uncorrectable
+     * error detected
+     */
+    count = -1;
+    goto finish;
+  }
+  /*
+   * Compute err+eras evaluator poly omega(x) = s(x)*lambda(x) (modulo
+   * x**(NN-KK)). in index form. Also find deg(omega).
+   */
+  deg_omega = 0;
+  for (i = 0; i < NN-KK;i++){
+    tmp = 0;
+    j = (deg_lambda < i) ? deg_lambda : i;
+    for(;j >= 0; j--){
+      if ((s[i + 1 - j] != A0) && (lambda[j] != A0))
+	tmp ^= Alpha_to[modnn(s[i + 1 - j] + lambda[j])];
+    }
+    if(tmp != 0)
+      deg_omega = i;
+    omega[i] = Index_of[tmp];
+  }
+  omega[NN-KK] = A0;
+  
+  /*
+   * Compute error values in poly-form. num1 = omega(inv(X(l))), num2 =
+   * inv(X(l))**(B0-1) and den = lambda_pr(inv(X(l))) all in poly-form
+   */
+  for (j = count-1; j >=0; j--) {
+    num1 = 0;
+    for (i = deg_omega; i >= 0; i--) {
+      if (omega[i] != A0)
+	num1  ^= Alpha_to[modnn(omega[i] + i * root[j])];
+    }
+    num2 = Alpha_to[modnn(root[j] * (B0 - 1) + NN)];
+    den = 0;
+    
+    /* lambda[i+1] for i even is the formal derivative lambda_pr of lambda[i] */
+    for (i = min(deg_lambda,NN-KK-1) & ~1; i >= 0; i -=2) {
+      if(lambda[i+1] != A0)
+	den ^= Alpha_to[modnn(lambda[i+1] + i * root[j])];
+    }
+    if (den == 0) {
+#if DEBUG >= 1
+      printf("\n ERROR: denominator = 0\n");
+#endif
+      /* Convert to dual- basis */
+      count = -1;
+      goto finish;
+    }
+    /* Apply error to data */
+    if (num1 != 0) {
+        eras_val[j] = Alpha_to[modnn(Index_of[num1] + Index_of[num2] + NN - Index_of[den])];
+    } else {
+        eras_val[j] = 0;
+    }
+  }
+ finish:
+  for(i=0;i<count;i++)
+      eras_pos[i] = loc[i];
+  return count;
+}
+
+/***************************************************************************/
+/* The DOC specific code begins here */
+
+#define SECTOR_SIZE 512
+/* The sector bytes are packed into NB_DATA MM bits words */
+#define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / MM)
+
+/* 
+ * Correct the errors in 'sector[]' by using 'ecc1[]' which is the
+ * content of the feedback shift register applyied to the sector and
+ * the ECC. Return the number of errors corrected (and correct them in
+ * sector), or -1 if error 
+ */
+int doc_decode_ecc(unsigned char sector[SECTOR_SIZE], unsigned char ecc1[6])
+{
+    int parity, i, nb_errors;
+    gf bb[NN - KK + 1];
+    gf error_val[NN-KK];
+    int error_pos[NN-KK], pos, bitpos, index, val;
+    dtype *Alpha_to, *Index_of;
+
+    /* init log and exp tables here to save memory. However, it is slower */
+    Alpha_to = kmalloc((NN + 1) * sizeof(dtype), GFP_KERNEL);
+    if (!Alpha_to)
+        return -1;
+    
+    Index_of = kmalloc((NN + 1) * sizeof(dtype), GFP_KERNEL);
+    if (!Index_of) {
+        kfree(Alpha_to);
+        return -1;
+    }
+
+    generate_gf(Alpha_to, Index_of);
+
+    parity = ecc1[1];
+
+    bb[0] =  (ecc1[4] & 0xff) | ((ecc1[5] & 0x03) << 8);
+    bb[1] = ((ecc1[5] & 0xfc) >> 2) | ((ecc1[2] & 0x0f) << 6);
+    bb[2] = ((ecc1[2] & 0xf0) >> 4) | ((ecc1[3] & 0x3f) << 4);
+    bb[3] = ((ecc1[3] & 0xc0) >> 6) | ((ecc1[0] & 0xff) << 2);
+
+    nb_errors = eras_dec_rs(Alpha_to, Index_of, bb, 
+                            error_val, error_pos, 0);
+    if (nb_errors <= 0)
+        goto the_end;
+
+    /* correct the errors */
+    for(i=0;i<nb_errors;i++) {
+        pos = error_pos[i];
+        if (pos >= NB_DATA && pos < KK) {
+            nb_errors = -1;
+            goto the_end;
+        }
+        if (pos < NB_DATA) {
+            /* extract bit position (MSB first) */
+            pos = 10 * (NB_DATA - 1 - pos) - 6;
+            /* now correct the following 10 bits. At most two bytes
+               can be modified since pos is even */
+            index = (pos >> 3) ^ 1;
+            bitpos = pos & 7;
+            if ((index >= 0 && index < SECTOR_SIZE) || 
+                index == (SECTOR_SIZE + 1)) {
+                val = error_val[i] >> (2 + bitpos);
+                parity ^= val;
+                if (index < SECTOR_SIZE)
+                    sector[index] ^= val;
+            }
+            index = ((pos >> 3) + 1) ^ 1;
+            bitpos = (bitpos + 10) & 7;
+            if (bitpos == 0)
+                bitpos = 8;
+            if ((index >= 0 && index < SECTOR_SIZE) || 
+                index == (SECTOR_SIZE + 1)) {
+                val = error_val[i] << (8 - bitpos);
+                parity ^= val;
+                if (index < SECTOR_SIZE)
+                    sector[index] ^= val;
+            }
+        }
+    }
+    
+    /* use parity to test extra errors */
+    if ((parity & 0xff) != 0)
+        nb_errors = -1;
+
+ the_end:
+    kfree(Alpha_to);
+    kfree(Index_of);
+    return nb_errors;
+}
+
+EXPORT_SYMBOL_GPL(doc_decode_ecc);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fabrice Bellard <fabrice.bellard@netgem.com>");
+MODULE_DESCRIPTION("ECC code for correcting errors detected by DiskOnChip 2000 and Millennium ECC hardware");
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
new file mode 100644
index 000000000000..197d67045e1e
--- /dev/null
+++ b/drivers/mtd/devices/docprobe.c
@@ -0,0 +1,355 @@
+
+/* Linux driver for Disk-On-Chip devices			*/
+/* Probe routines common to all DoC devices			*/
+/* (C) 1999 Machine Vision Holdings, Inc.			*/
+/* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>		*/
+
+/* $Id: docprobe.c,v 1.44 2005/01/05 12:40:36 dwmw2 Exp $	*/
+
+
+
+/* DOC_PASSIVE_PROBE:
+   In order to ensure that the BIOS checksum is correct at boot time, and 
+   hence that the onboard BIOS extension gets executed, the DiskOnChip 
+   goes into reset mode when it is read sequentially: all registers 
+   return 0xff until the chip is woken up again by writing to the 
+   DOCControl register. 
+
+   Unfortunately, this means that the probe for the DiskOnChip is unsafe, 
+   because one of the first things it does is write to where it thinks 
+   the DOCControl register should be - which may well be shared memory 
+   for another device. I've had machines which lock up when this is 
+   attempted. Hence the possibility to do a passive probe, which will fail 
+   to detect a chip in reset mode, but is at least guaranteed not to lock
+   the machine.
+
+   If you have this problem, uncomment the following line:
+#define DOC_PASSIVE_PROBE
+*/
+
+
+/* DOC_SINGLE_DRIVER:
+   Millennium driver has been merged into DOC2000 driver.
+
+   The old Millennium-only driver has been retained just in case there
+   are problems with the new code. If the combined driver doesn't work
+   for you, you can try the old one by undefining DOC_SINGLE_DRIVER 
+   below and also enabling it in your configuration. If this fixes the
+   problems, please send a report to the MTD mailing list at 
+   <linux-mtd@lists.infradead.org>.
+*/
+#define DOC_SINGLE_DRIVER
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/doc2000.h>
+#include <linux/mtd/compatmac.h>
+
+/* Where to look for the devices? */
+#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
+#define CONFIG_MTD_DOCPROBE_ADDRESS 0
+#endif
+
+
+static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS;
+module_param(doc_config_location, ulong, 0);
+MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
+
+static unsigned long __initdata doc_locations[] = {
+#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_MTD_DOCPROBE_HIGH
+	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, 
+	0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
+	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, 
+	0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, 
+	0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
+#else /*  CONFIG_MTD_DOCPROBE_HIGH */
+	0xc8000, 0xca000, 0xcc000, 0xce000, 
+	0xd0000, 0xd2000, 0xd4000, 0xd6000,
+	0xd8000, 0xda000, 0xdc000, 0xde000, 
+	0xe0000, 0xe2000, 0xe4000, 0xe6000, 
+	0xe8000, 0xea000, 0xec000, 0xee000,
+#endif /*  CONFIG_MTD_DOCPROBE_HIGH */
+#elif defined(__PPC__)
+	0xe4000000,
+#elif defined(CONFIG_MOMENCO_OCELOT)
+	0x2f000000,
+        0xff000000,
+#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
+        0xff000000,
+##else
+#warning Unknown architecture for DiskOnChip. No default probe locations defined
+#endif
+	0xffffffff };
+
+/* doccheck: Probe a given memory window to see if there's a DiskOnChip present */
+
+static inline int __init doccheck(void __iomem *potential, unsigned long physadr)
+{
+	void __iomem *window=potential;
+	unsigned char tmp, tmpb, tmpc, ChipID;
+#ifndef DOC_PASSIVE_PROBE
+	unsigned char tmp2;
+#endif
+
+	/* Routine copied from the Linux DOC driver */
+
+#ifdef CONFIG_MTD_DOCPROBE_55AA
+	/* Check for 0x55 0xAA signature at beginning of window,
+	   this is no longer true once we remove the IPL (for Millennium */
+	if (ReadDOC(window, Sig1) != 0x55 || ReadDOC(window, Sig2) != 0xaa)
+		return 0;
+#endif /* CONFIG_MTD_DOCPROBE_55AA */
+
+#ifndef DOC_PASSIVE_PROBE	
+	/* It's not possible to cleanly detect the DiskOnChip - the
+	 * bootup procedure will put the device into reset mode, and
+	 * it's not possible to talk to it without actually writing
+	 * to the DOCControl register. So we store the current contents
+	 * of the DOCControl register's location, in case we later decide
+	 * that it's not a DiskOnChip, and want to put it back how we
+	 * found it. 
+	 */
+	tmp2 = ReadDOC(window, DOCControl);
+	
+	/* Reset the DiskOnChip ASIC */
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+		 window, DOCControl);
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+		 window, DOCControl);
+	
+	/* Enable the DiskOnChip ASIC */
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+		 window, DOCControl);
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+		 window, DOCControl);
+#endif /* !DOC_PASSIVE_PROBE */	
+
+	/* We need to read the ChipID register four times. For some
+	   newer DiskOnChip 2000 units, the first three reads will
+	   return the DiskOnChip Millennium ident. Don't ask. */
+	ChipID = ReadDOC(window, ChipID);
+  
+	switch (ChipID) {
+	case DOC_ChipID_Doc2k:
+		/* Check the TOGGLE bit in the ECC register */
+		tmp  = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT;
+		tmpb = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT;
+		tmpc = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT;
+		if (tmp != tmpb && tmp == tmpc)
+				return ChipID;
+		break;
+		
+	case DOC_ChipID_DocMil:
+		/* Check for the new 2000 with Millennium ASIC */
+		ReadDOC(window, ChipID);
+		ReadDOC(window, ChipID);
+		if (ReadDOC(window, ChipID) != DOC_ChipID_DocMil)
+			ChipID = DOC_ChipID_Doc2kTSOP;
+
+		/* Check the TOGGLE bit in the ECC register */
+		tmp  = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT;
+		tmpb = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT;
+		tmpc = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT;
+		if (tmp != tmpb && tmp == tmpc)
+				return ChipID;
+		break;
+		
+	case DOC_ChipID_DocMilPlus16:
+	case DOC_ChipID_DocMilPlus32:
+	case 0:
+		/* Possible Millennium+, need to do more checks */
+#ifndef DOC_PASSIVE_PROBE
+		/* Possibly release from power down mode */
+		for (tmp = 0; (tmp < 4); tmp++)
+			ReadDOC(window, Mplus_Power);
+
+		/* Reset the DiskOnChip ASIC */
+		tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
+			DOC_MODE_BDECT;
+		WriteDOC(tmp, window, Mplus_DOCControl);
+		WriteDOC(~tmp, window, Mplus_CtrlConfirm);
+	
+		mdelay(1);
+		/* Enable the DiskOnChip ASIC */
+		tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
+			DOC_MODE_BDECT;
+		WriteDOC(tmp, window, Mplus_DOCControl);
+		WriteDOC(~tmp, window, Mplus_CtrlConfirm);
+		mdelay(1);
+#endif /* !DOC_PASSIVE_PROBE */	
+
+		ChipID = ReadDOC(window, ChipID);
+
+		switch (ChipID) {
+		case DOC_ChipID_DocMilPlus16:
+		case DOC_ChipID_DocMilPlus32:
+			/* Check the TOGGLE bit in the toggle register */
+			tmp  = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT;
+			tmpb = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT;
+			tmpc = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT;
+			if (tmp != tmpb && tmp == tmpc)
+					return ChipID;
+		default:
+			break;
+		}
+		/* FALL TRHU */
+
+	default:
+
+#ifdef CONFIG_MTD_DOCPROBE_55AA
+		printk(KERN_DEBUG "Possible DiskOnChip with unknown ChipID %2.2X found at 0x%lx\n",
+		       ChipID, physadr);
+#endif
+#ifndef DOC_PASSIVE_PROBE
+		/* Put back the contents of the DOCControl register, in case it's not
+		 * actually a DiskOnChip.
+		 */
+		WriteDOC(tmp2, window, DOCControl);
+#endif
+		return 0;
+	}
+
+	printk(KERN_WARNING "DiskOnChip failed TOGGLE test, dropping.\n");
+
+#ifndef DOC_PASSIVE_PROBE
+	/* Put back the contents of the DOCControl register: it's not a DiskOnChip */
+	WriteDOC(tmp2, window, DOCControl);
+#endif
+	return 0;
+}   
+
+static int docfound;
+
+static void __init DoC_Probe(unsigned long physadr)
+{
+	void __iomem *docptr;
+	struct DiskOnChip *this;
+	struct mtd_info *mtd;
+	int ChipID;
+	char namebuf[15];
+	char *name = namebuf;
+	char *im_funcname = NULL;
+	char *im_modname = NULL;
+	void (*initroutine)(struct mtd_info *) = NULL;
+
+	docptr = ioremap(physadr, DOC_IOREMAP_LEN);
+	
+	if (!docptr)
+		return;
+	
+	if ((ChipID = doccheck(docptr, physadr))) {
+		if (ChipID == DOC_ChipID_Doc2kTSOP) {
+			/* Remove this at your own peril. The hardware driver works but nothing prevents you from erasing bad blocks */
+			printk(KERN_NOTICE "Refusing to drive DiskOnChip 2000 TSOP until Bad Block Table is correctly supported by INFTL\n");
+			iounmap(docptr);
+			return;
+		}
+		docfound = 1;
+		mtd = kmalloc(sizeof(struct DiskOnChip) + sizeof(struct mtd_info), GFP_KERNEL);
+
+		if (!mtd) {
+			printk(KERN_WARNING "Cannot allocate memory for data structures. Dropping.\n");
+			iounmap(docptr);
+			return;
+		}
+		
+		this = (struct DiskOnChip *)(&mtd[1]);
+		
+		memset((char *)mtd,0, sizeof(struct mtd_info));
+		memset((char *)this, 0, sizeof(struct DiskOnChip));
+
+		mtd->priv = this;
+		this->virtadr = docptr;
+		this->physadr = physadr;
+		this->ChipID = ChipID;
+		sprintf(namebuf, "with ChipID %2.2X", ChipID);
+
+		switch(ChipID) {
+		case DOC_ChipID_Doc2kTSOP:
+			name="2000 TSOP";
+			im_funcname = "DoC2k_init";
+			im_modname = "doc2000";
+			break;
+			
+		case DOC_ChipID_Doc2k:
+			name="2000";
+			im_funcname = "DoC2k_init";
+			im_modname = "doc2000";
+			break;
+			
+		case DOC_ChipID_DocMil:
+			name="Millennium";
+#ifdef DOC_SINGLE_DRIVER
+			im_funcname = "DoC2k_init";
+			im_modname = "doc2000";
+#else
+			im_funcname = "DoCMil_init";
+			im_modname = "doc2001";
+#endif /* DOC_SINGLE_DRIVER */
+			break;
+
+		case DOC_ChipID_DocMilPlus16:
+		case DOC_ChipID_DocMilPlus32:
+			name="MillenniumPlus";
+			im_funcname = "DoCMilPlus_init";
+			im_modname = "doc2001plus";
+			break;
+		}
+
+		if (im_funcname)
+			initroutine = inter_module_get_request(im_funcname, im_modname);
+
+		if (initroutine) {
+			(*initroutine)(mtd);
+			inter_module_put(im_funcname);
+			return;
+		}
+		printk(KERN_NOTICE "Cannot find driver for DiskOnChip %s at 0x%lX\n", name, physadr);
+		kfree(mtd);
+	}
+	iounmap(docptr);
+}
+
+
+/****************************************************************************
+ *
+ * Module stuff
+ *
+ ****************************************************************************/
+
+static int __init init_doc(void)
+{
+	int i;
+	
+	if (doc_config_location) {
+		printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location);
+		DoC_Probe(doc_config_location);
+	} else {
+		for (i=0; (doc_locations[i] != 0xffffffff); i++) {
+			DoC_Probe(doc_locations[i]);
+		}
+	}
+	/* No banner message any more. Print a message if no DiskOnChip
+	   found, so the user knows we at least tried. */
+	if (!docfound)
+		printk(KERN_INFO "No recognised DiskOnChip devices found\n");
+	return -EAGAIN;
+}
+
+module_init(init_doc);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Probe code for DiskOnChip 2000 and Millennium devices");
+
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
new file mode 100644
index 000000000000..dfd335e4a2a8
--- /dev/null
+++ b/drivers/mtd/devices/lart.c
@@ -0,0 +1,711 @@
+
+/*
+ * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
+ *
+ * $Id: lart.c,v 1.7 2004/08/09 13:19:44 dwmw2 Exp $
+ *
+ * Author: Abraham vd Merwe <abraham@2d3d.co.za>
+ *
+ * Copyright (c) 2001, 2d3D, Inc.
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * References:
+ *
+ *    [1] 3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ *           - Order Number: 290644-005
+ *           - January 2000
+ *
+ *    [2] MTD internal API documentation
+ *           - http://www.linux-mtd.infradead.org/tech/
+ *
+ * Limitations:
+ *
+ *    Even though this driver is written for 3 Volt Fast Boot
+ *    Block Flash Memory, it is rather specific to LART. With
+ *    Minor modifications, notably the without data/address line
+ *    mangling and different bus settings, etc. it should be
+ *    trivial to adapt to other platforms.
+ *
+ *    If somebody would sponsor me a different board, I'll
+ *    adapt the driver (:
+ */
+
+/* debugging */
+//#define LART_DEBUG
+
+/* partition support */
+#define HAVE_PARTITIONS
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/mtd/mtd.h>
+#ifdef HAVE_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
+#ifndef CONFIG_SA1100_LART
+#error This is for LART architecture only
+#endif
+
+static char module_name[] = "lart";
+
+/*
+ * These values is specific to 28Fxxxx3 flash memory.
+ * See section 2.3.1 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_BLOCKSIZE_PARAM		(4096 * BUSWIDTH)
+#define FLASH_NUMBLOCKS_16m_PARAM	8
+#define FLASH_NUMBLOCKS_8m_PARAM	8
+
+/*
+ * These values is specific to 28Fxxxx3 flash memory.
+ * See section 2.3.2 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_BLOCKSIZE_MAIN		(32768 * BUSWIDTH)
+#define FLASH_NUMBLOCKS_16m_MAIN	31
+#define FLASH_NUMBLOCKS_8m_MAIN		15
+
+/*
+ * These values are specific to LART
+ */
+
+/* general */
+#define BUSWIDTH			4				/* don't change this - a lot of the code _will_ break if you change this */
+#define FLASH_OFFSET		0xe8000000		/* see linux/arch/arm/mach-sa1100/lart.c */
+
+/* blob */
+#define NUM_BLOB_BLOCKS		FLASH_NUMBLOCKS_16m_PARAM
+#define BLOB_START			0x00000000
+#define BLOB_LEN			(NUM_BLOB_BLOCKS * FLASH_BLOCKSIZE_PARAM)
+
+/* kernel */
+#define NUM_KERNEL_BLOCKS	7
+#define KERNEL_START		(BLOB_START + BLOB_LEN)
+#define KERNEL_LEN			(NUM_KERNEL_BLOCKS * FLASH_BLOCKSIZE_MAIN)
+
+/* initial ramdisk */
+#define NUM_INITRD_BLOCKS	24
+#define INITRD_START		(KERNEL_START + KERNEL_LEN)
+#define INITRD_LEN			(NUM_INITRD_BLOCKS * FLASH_BLOCKSIZE_MAIN)
+
+/*
+ * See section 4.0 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define READ_ARRAY			0x00FF00FF		/* Read Array/Reset */
+#define READ_ID_CODES		0x00900090		/* Read Identifier Codes */
+#define ERASE_SETUP			0x00200020		/* Block Erase */
+#define ERASE_CONFIRM		0x00D000D0		/* Block Erase and Program Resume */
+#define PGM_SETUP			0x00400040		/* Program */
+#define STATUS_READ			0x00700070		/* Read Status Register */
+#define STATUS_CLEAR		0x00500050		/* Clear Status Register */
+#define STATUS_BUSY			0x00800080		/* Write State Machine Status (WSMS) */
+#define STATUS_ERASE_ERR	0x00200020		/* Erase Status (ES) */
+#define STATUS_PGM_ERR		0x00100010		/* Program Status (PS) */
+
+/*
+ * See section 4.2 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_MANUFACTURER			0x00890089
+#define FLASH_DEVICE_8mbit_TOP		0x88f188f1
+#define FLASH_DEVICE_8mbit_BOTTOM	0x88f288f2
+#define FLASH_DEVICE_16mbit_TOP		0x88f388f3
+#define FLASH_DEVICE_16mbit_BOTTOM	0x88f488f4
+
+/***************************************************************************************************/
+
+/*
+ * The data line mapping on LART is as follows:
+ * 
+ *   	 U2  CPU |   U3  CPU
+ *   	 -------------------
+ *   	  0  20  |   0   12
+ *   	  1  22  |   1   14
+ *   	  2  19  |   2   11
+ *   	  3  17  |   3   9
+ *   	  4  24  |   4   0
+ *   	  5  26  |   5   2
+ *   	  6  31  |   6   7
+ *   	  7  29  |   7   5
+ *   	  8  21  |   8   13
+ *   	  9  23  |   9   15
+ *   	  10 18  |   10  10
+ *   	  11 16  |   11  8
+ *   	  12 25  |   12  1
+ *   	  13 27  |   13  3
+ *   	  14 30  |   14  6
+ *   	  15 28  |   15  4
+ */
+
+/* Mangle data (x) */
+#define DATA_TO_FLASH(x)				\
+	(									\
+		(((x) & 0x08009000) >> 11)	+	\
+		(((x) & 0x00002000) >> 10)	+	\
+		(((x) & 0x04004000) >> 8)	+	\
+		(((x) & 0x00000010) >> 4)	+	\
+		(((x) & 0x91000820) >> 3)	+	\
+		(((x) & 0x22080080) >> 2)	+	\
+		((x) & 0x40000400)			+	\
+		(((x) & 0x00040040) << 1)	+	\
+		(((x) & 0x00110000) << 4)	+	\
+		(((x) & 0x00220100) << 5)	+	\
+		(((x) & 0x00800208) << 6)	+	\
+		(((x) & 0x00400004) << 9)	+	\
+		(((x) & 0x00000001) << 12)	+	\
+		(((x) & 0x00000002) << 13)		\
+	)
+
+/* Unmangle data (x) */
+#define FLASH_TO_DATA(x)				\
+	(									\
+		(((x) & 0x00010012) << 11)	+	\
+		(((x) & 0x00000008) << 10)	+	\
+		(((x) & 0x00040040) << 8)	+	\
+		(((x) & 0x00000001) << 4)	+	\
+		(((x) & 0x12200104) << 3)	+	\
+		(((x) & 0x08820020) << 2)	+	\
+		((x) & 0x40000400)			+	\
+		(((x) & 0x00080080) >> 1)	+	\
+		(((x) & 0x01100000) >> 4)	+	\
+		(((x) & 0x04402000) >> 5)	+	\
+		(((x) & 0x20008200) >> 6)	+	\
+		(((x) & 0x80000800) >> 9)	+	\
+		(((x) & 0x00001000) >> 12)	+	\
+		(((x) & 0x00004000) >> 13)		\
+	)
+
+/* 
+ * The address line mapping on LART is as follows:
+ *
+ *   	 U3  CPU |   U2  CPU
+ *   	 -------------------
+ *   	  0  2   |   0   2
+ *   	  1  3   |   1   3
+ *   	  2  9   |   2   9
+ *   	  3  13  |   3   8
+ *   	  4  8   |   4   7
+ *   	  5  12  |   5   6
+ *   	  6  11  |   6   5
+ *   	  7  10  |   7   4
+ *   	  8  4   |   8   10
+ *   	  9  5   |   9   11
+ *   	 10  6   |   10  12
+ *   	 11  7   |   11  13
+ *
+ *   	 BOOT BLOCK BOUNDARY
+ *
+ *   	 12  15  |   12  15
+ *   	 13  14  |   13  14
+ *   	 14  16  |   14  16
+ * 
+ *   	 MAIN BLOCK BOUNDARY
+ *
+ *   	 15  17  |   15  18
+ *   	 16  18  |   16  17
+ *   	 17  20  |   17  20
+ *   	 18  19  |   18  19
+ *   	 19  21  |   19  21
+ *
+ * As we can see from above, the addresses aren't mangled across
+ * block boundaries, so we don't need to worry about address
+ * translations except for sending/reading commands during
+ * initialization
+ */
+
+/* Mangle address (x) on chip U2 */
+#define ADDR_TO_FLASH_U2(x)				\
+	(									\
+		(((x) & 0x00000f00) >> 4)	+	\
+		(((x) & 0x00042000) << 1)	+	\
+		(((x) & 0x0009c003) << 2)	+	\
+		(((x) & 0x00021080) << 3)	+	\
+		(((x) & 0x00000010) << 4)	+	\
+		(((x) & 0x00000040) << 5)	+	\
+		(((x) & 0x00000024) << 7)	+	\
+		(((x) & 0x00000008) << 10)		\
+	)
+
+/* Unmangle address (x) on chip U2 */
+#define FLASH_U2_TO_ADDR(x)				\
+	(									\
+		(((x) << 4) & 0x00000f00)	+	\
+		(((x) >> 1) & 0x00042000)	+	\
+		(((x) >> 2) & 0x0009c003)	+	\
+		(((x) >> 3) & 0x00021080)	+	\
+		(((x) >> 4) & 0x00000010)	+	\
+		(((x) >> 5) & 0x00000040)	+	\
+		(((x) >> 7) & 0x00000024)	+	\
+		(((x) >> 10) & 0x00000008)		\
+	)
+
+/* Mangle address (x) on chip U3 */
+#define ADDR_TO_FLASH_U3(x)				\
+	(									\
+		(((x) & 0x00000080) >> 3)	+	\
+		(((x) & 0x00000040) >> 1)	+	\
+		(((x) & 0x00052020) << 1)	+	\
+		(((x) & 0x00084f03) << 2)	+	\
+		(((x) & 0x00029010) << 3)	+	\
+		(((x) & 0x00000008) << 5)	+	\
+		(((x) & 0x00000004) << 7)		\
+	)
+
+/* Unmangle address (x) on chip U3 */
+#define FLASH_U3_TO_ADDR(x)				\
+	(									\
+		(((x) << 3) & 0x00000080)	+	\
+		(((x) << 1) & 0x00000040)	+	\
+		(((x) >> 1) & 0x00052020)	+	\
+		(((x) >> 2) & 0x00084f03)	+	\
+		(((x) >> 3) & 0x00029010)	+	\
+		(((x) >> 5) & 0x00000008)	+	\
+		(((x) >> 7) & 0x00000004)		\
+	)
+
+/***************************************************************************************************/
+
+static __u8 read8 (__u32 offset)
+{
+   volatile __u8 *data = (__u8 *) (FLASH_OFFSET + offset);
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.2x\n",__FUNCTION__,offset,*data);
+#endif
+   return (*data);
+}
+
+static __u32 read32 (__u32 offset)
+{
+   volatile __u32 *data = (__u32 *) (FLASH_OFFSET + offset);
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.8x\n",__FUNCTION__,offset,*data);
+#endif
+   return (*data);
+}
+
+static void write32 (__u32 x,__u32 offset)
+{
+   volatile __u32 *data = (__u32 *) (FLASH_OFFSET + offset);
+   *data = x;
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n",__FUNCTION__,offset,*data);
+#endif
+}
+
+/***************************************************************************************************/
+
+/*
+ * Probe for 16mbit flash memory on a LART board without doing
+ * too much damage. Since we need to write 1 dword to memory,
+ * we're f**cked if this happens to be DRAM since we can't
+ * restore the memory (otherwise we might exit Read Array mode).
+ *
+ * Returns 1 if we found 16mbit flash memory on LART, 0 otherwise.
+ */
+static int flash_probe (void)
+{
+   __u32 manufacturer,devtype;
+
+   /* setup "Read Identifier Codes" mode */
+   write32 (DATA_TO_FLASH (READ_ID_CODES),0x00000000);
+
+   /* probe U2. U2/U3 returns the same data since the first 3
+	* address lines is mangled in the same way */
+   manufacturer = FLASH_TO_DATA (read32 (ADDR_TO_FLASH_U2 (0x00000000)));
+   devtype = FLASH_TO_DATA (read32 (ADDR_TO_FLASH_U2 (0x00000001)));
+
+   /* put the flash back into command mode */
+   write32 (DATA_TO_FLASH (READ_ARRAY),0x00000000);
+
+   return (manufacturer == FLASH_MANUFACTURER && (devtype == FLASH_DEVICE_16mbit_TOP || FLASH_DEVICE_16mbit_BOTTOM));
+}
+
+/*
+ * Erase one block of flash memory at offset ``offset'' which is any
+ * address within the block which should be erased.
+ *
+ * Returns 1 if successful, 0 otherwise.
+ */
+static inline int erase_block (__u32 offset)
+{
+   __u32 status;
+
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(): 0x%.8x\n",__FUNCTION__,offset);
+#endif
+
+   /* erase and confirm */
+   write32 (DATA_TO_FLASH (ERASE_SETUP),offset);
+   write32 (DATA_TO_FLASH (ERASE_CONFIRM),offset);
+
+   /* wait for block erase to finish */
+   do
+	 {
+		write32 (DATA_TO_FLASH (STATUS_READ),offset);
+		status = FLASH_TO_DATA (read32 (offset));
+	 }
+   while ((~status & STATUS_BUSY) != 0);
+
+   /* put the flash back into command mode */
+   write32 (DATA_TO_FLASH (READ_ARRAY),offset);
+
+   /* was the erase successfull? */
+   if ((status & STATUS_ERASE_ERR))
+	 {
+		printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset);
+		return (0);
+	 }
+
+   return (1);
+}
+
+static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
+{
+   __u32 addr,len;
+   int i,first;
+
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n",__FUNCTION__,instr->addr,instr->len);
+#endif
+
+   /* sanity checks */
+   if (instr->addr + instr->len > mtd->size) return (-EINVAL);
+
+   /*
+	* check that both start and end of the requested erase are
+	* aligned with the erasesize at the appropriate addresses.
+	*
+	* skip all erase regions which are ended before the start of
+	* the requested erase. Actually, to save on the calculations,
+	* we skip to the first erase region which starts after the
+	* start of the requested erase, and then go back one.
+	*/
+   for (i = 0; i < mtd->numeraseregions && instr->addr >= mtd->eraseregions[i].offset; i++) ;
+   i--;
+
+   /*
+	* ok, now i is pointing at the erase region in which this
+	* erase request starts. Check the start of the requested
+	* erase range is aligned with the erase size which is in
+	* effect here.
+	*/
+   if (instr->addr & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+
+   /* Remember the erase region we start on */
+   first = i;
+
+   /*
+	* next, check that the end of the requested erase is aligned
+	* with the erase region at that address.
+	*
+	* as before, drop back one to point at the region in which
+	* the address actually falls
+	*/
+   for (; i < mtd->numeraseregions && instr->addr + instr->len >= mtd->eraseregions[i].offset; i++) ;
+   i--;
+
+   /* is the end aligned on a block boundary? */
+   if ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+
+   addr = instr->addr;
+   len = instr->len;
+
+   i = first;
+
+   /* now erase those blocks */
+   while (len)
+	 {
+		if (!erase_block (addr))
+		  {
+			 instr->state = MTD_ERASE_FAILED;
+			 return (-EIO);
+		  }
+
+		addr += mtd->eraseregions[i].erasesize;
+		len -= mtd->eraseregions[i].erasesize;
+
+		if (addr == mtd->eraseregions[i].offset + (mtd->eraseregions[i].erasesize * mtd->eraseregions[i].numblocks)) i++;
+	 }
+
+   instr->state = MTD_ERASE_DONE;
+   mtd_erase_callback(instr);
+
+   return (0);
+}
+
+static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retlen,u_char *buf)
+{
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) from,len);
+#endif
+
+   /* sanity checks */
+   if (!len) return (0);
+   if (from + len > mtd->size) return (-EINVAL);
+
+   /* we always read len bytes */
+   *retlen = len;
+
+   /* first, we read bytes until we reach a dword boundary */
+   if (from & (BUSWIDTH - 1))
+	 {
+		int gap = BUSWIDTH - (from & (BUSWIDTH - 1));
+
+		while (len && gap--) *buf++ = read8 (from++), len--;
+	 }
+
+   /* now we read dwords until we reach a non-dword boundary */
+   while (len >= BUSWIDTH)
+	 {
+		*((__u32 *) buf) = read32 (from);
+
+		buf += BUSWIDTH;
+		from += BUSWIDTH;
+		len -= BUSWIDTH;
+	 }
+
+   /* top up the last unaligned bytes */
+   if (len & (BUSWIDTH - 1))
+	 while (len--) *buf++ = read8 (from++);
+
+   return (0);
+}
+
+/*
+ * Write one dword ``x'' to flash memory at offset ``offset''. ``offset''
+ * must be 32 bits, i.e. it must be on a dword boundary.
+ *
+ * Returns 1 if successful, 0 otherwise.
+ */
+static inline int write_dword (__u32 offset,__u32 x)
+{
+   __u32 status;
+
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n",__FUNCTION__,offset,x);
+#endif
+
+   /* setup writing */
+   write32 (DATA_TO_FLASH (PGM_SETUP),offset);
+
+   /* write the data */
+   write32 (x,offset);
+
+   /* wait for the write to finish */
+   do
+	 {
+		write32 (DATA_TO_FLASH (STATUS_READ),offset);
+		status = FLASH_TO_DATA (read32 (offset));
+	 }
+   while ((~status & STATUS_BUSY) != 0);
+
+   /* put the flash back into command mode */
+   write32 (DATA_TO_FLASH (READ_ARRAY),offset);
+
+   /* was the write successfull? */
+   if ((status & STATUS_PGM_ERR) || read32 (offset) != x)
+	 {
+		printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset);
+		return (0);
+	 }
+
+   return (1);
+}
+
+static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
+{
+   __u8 tmp[4];
+   int i,n;
+
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) to,len);
+#endif
+
+   *retlen = 0;
+
+   /* sanity checks */
+   if (!len) return (0);
+   if (to + len > mtd->size) return (-EINVAL);
+
+   /* first, we write a 0xFF.... padded byte until we reach a dword boundary */
+   if (to & (BUSWIDTH - 1))
+	 {
+		__u32 aligned = to & ~(BUSWIDTH - 1);
+		int gap = to - aligned;
+
+		i = n = 0;
+
+		while (gap--) tmp[i++] = 0xFF;
+		while (len && i < BUSWIDTH) tmp[i++] = buf[n++], len--;
+		while (i < BUSWIDTH) tmp[i++] = 0xFF;
+
+		if (!write_dword (aligned,*((__u32 *) tmp))) return (-EIO);
+
+		to += n;
+		buf += n;
+		*retlen += n;
+	 }
+
+   /* now we write dwords until we reach a non-dword boundary */
+   while (len >= BUSWIDTH)
+	 {
+		if (!write_dword (to,*((__u32 *) buf))) return (-EIO);
+
+		to += BUSWIDTH;
+		buf += BUSWIDTH;
+		*retlen += BUSWIDTH;
+		len -= BUSWIDTH;
+	 }
+
+   /* top up the last unaligned bytes, padded with 0xFF.... */
+   if (len & (BUSWIDTH - 1))
+	 {
+		i = n = 0;
+
+		while (len--) tmp[i++] = buf[n++];
+		while (i < BUSWIDTH) tmp[i++] = 0xFF;
+
+		if (!write_dword (to,*((__u32 *) tmp))) return (-EIO);
+
+		*retlen += n;
+	 }
+
+   return (0);
+}
+
+/***************************************************************************************************/
+
+#define NB_OF(x) (sizeof (x) / sizeof (x[0]))
+
+static struct mtd_info mtd;
+
+static struct mtd_erase_region_info erase_regions[] = {
+	/* parameter blocks */
+	{
+		.offset		= 0x00000000,
+		.erasesize	= FLASH_BLOCKSIZE_PARAM,
+		.numblocks	= FLASH_NUMBLOCKS_16m_PARAM,
+	},
+	/* main blocks */
+	{
+		.offset	 = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM,
+		.erasesize	= FLASH_BLOCKSIZE_MAIN,
+		.numblocks	= FLASH_NUMBLOCKS_16m_MAIN,
+	}
+};
+
+#ifdef HAVE_PARTITIONS
+static struct mtd_partition lart_partitions[] = {
+	/* blob */
+	{
+		.name	= "blob",
+		.offset	= BLOB_START,
+		.size	= BLOB_LEN,
+	},
+	/* kernel */
+	{
+		.name	= "kernel",
+		.offset	= KERNEL_START,		/* MTDPART_OFS_APPEND */
+		.size	= KERNEL_LEN,
+	},
+	/* initial ramdisk / file system */
+	{
+		.name	= "file system",
+		.offset	= INITRD_START,		/* MTDPART_OFS_APPEND */
+		.size	= INITRD_LEN,		/* MTDPART_SIZ_FULL */
+	}
+};
+#endif
+
+int __init lart_flash_init (void)
+{
+   int result;
+   memset (&mtd,0,sizeof (mtd));
+   printk ("MTD driver for LART. Written by Abraham vd Merwe <abraham@2d3d.co.za>\n");
+   printk ("%s: Probing for 28F160x3 flash on LART...\n",module_name);
+   if (!flash_probe ())
+	 {
+		printk (KERN_WARNING "%s: Found no LART compatible flash device\n",module_name);
+		return (-ENXIO);
+	 }
+   printk ("%s: This looks like a LART board to me.\n",module_name);
+   mtd.name = module_name;
+   mtd.type = MTD_NORFLASH;
+   mtd.flags = MTD_CAP_NORFLASH;
+   mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
+   mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
+   mtd.numeraseregions = NB_OF (erase_regions);
+   mtd.eraseregions = erase_regions;
+   mtd.erase = flash_erase;
+   mtd.read = flash_read;
+   mtd.write = flash_write;
+   mtd.owner = THIS_MODULE;
+
+#ifdef LART_DEBUG
+   printk (KERN_DEBUG
+		   "mtd.name = %s\n"
+		   "mtd.size = 0x%.8x (%uM)\n"
+		   "mtd.erasesize = 0x%.8x (%uK)\n"
+		   "mtd.numeraseregions = %d\n",
+		   mtd.name,
+		   mtd.size,mtd.size / (1024*1024),
+		   mtd.erasesize,mtd.erasesize / 1024,
+		   mtd.numeraseregions);
+
+   if (mtd.numeraseregions)
+	 for (result = 0; result < mtd.numeraseregions; result++)
+	   printk (KERN_DEBUG
+			   "\n\n"
+			   "mtd.eraseregions[%d].offset = 0x%.8x\n"
+			   "mtd.eraseregions[%d].erasesize = 0x%.8x (%uK)\n"
+			   "mtd.eraseregions[%d].numblocks = %d\n",
+			   result,mtd.eraseregions[result].offset,
+			   result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
+			   result,mtd.eraseregions[result].numblocks);
+
+#ifdef HAVE_PARTITIONS
+   printk ("\npartitions = %d\n",NB_OF (lart_partitions));
+
+   for (result = 0; result < NB_OF (lart_partitions); result++)
+	 printk (KERN_DEBUG
+			 "\n\n"
+			 "lart_partitions[%d].name = %s\n"
+			 "lart_partitions[%d].offset = 0x%.8x\n"
+			 "lart_partitions[%d].size = 0x%.8x (%uK)\n",
+			 result,lart_partitions[result].name,
+			 result,lart_partitions[result].offset,
+			 result,lart_partitions[result].size,lart_partitions[result].size / 1024);
+#endif
+#endif
+
+#ifndef HAVE_PARTITIONS
+   result = add_mtd_device (&mtd);
+#else
+   result = add_mtd_partitions (&mtd,lart_partitions,NB_OF (lart_partitions));
+#endif
+
+   return (result);
+}
+
+void __exit lart_flash_exit (void)
+{
+#ifndef HAVE_PARTITIONS
+   del_mtd_device (&mtd);
+#else
+   del_mtd_partitions (&mtd);
+#endif
+}
+
+module_init (lart_flash_init);
+module_exit (lart_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Abraham vd Merwe <abraham@2d3d.co.za>");
+MODULE_DESCRIPTION("MTD driver for Intel 28F160F3 on LART board");
+
+
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
new file mode 100644
index 000000000000..380ff08d29e4
--- /dev/null
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -0,0 +1,326 @@
+/*
+ *	Copyright (c) 2001 Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	$Id: ms02-nv.c,v 1.8 2005/01/05 18:05:12 dwmw2 Exp $
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/dec/ioasic_addrs.h>
+#include <asm/dec/kn02.h>
+#include <asm/dec/kn03.h>
+#include <asm/io.h>
+#include <asm/paccess.h>
+
+#include "ms02-nv.h"
+
+
+static char version[] __initdata =
+	"ms02-nv.c: v.1.0.0  13 Aug 2001  Maciej W. Rozycki.\n";
+
+MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
+MODULE_DESCRIPTION("DEC MS02-NV NVRAM module driver");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Addresses we probe for an MS02-NV at.  Modules may be located
+ * at any 8MiB boundary within a 0MiB up to 112MiB range or at any 32MiB
+ * boundary within a 0MiB up to 448MiB range.  We don't support a module
+ * at 0MiB, though.
+ */
+static ulong ms02nv_addrs[] __initdata = {
+	0x07000000, 0x06800000, 0x06000000, 0x05800000, 0x05000000,
+	0x04800000, 0x04000000, 0x03800000, 0x03000000, 0x02800000,
+	0x02000000, 0x01800000, 0x01000000, 0x00800000
+};
+
+static const char ms02nv_name[] = "DEC MS02-NV NVRAM";
+static const char ms02nv_res_diag_ram[] = "Diagnostic RAM";
+static const char ms02nv_res_user_ram[] = "General-purpose RAM";
+static const char ms02nv_res_csr[] = "Control and status register";
+
+static struct mtd_info *root_ms02nv_mtd;
+
+
+static int ms02nv_read(struct mtd_info *mtd, loff_t from,
+			size_t len, size_t *retlen, u_char *buf)
+{
+	struct ms02nv_private *mp = mtd->priv;
+
+	if (from + len > mtd->size)
+		return -EINVAL;
+
+	memcpy(buf, mp->uaddr + from, len);
+	*retlen = len;
+
+	return 0;
+}
+
+static int ms02nv_write(struct mtd_info *mtd, loff_t to,
+			size_t len, size_t *retlen, const u_char *buf)
+{
+	struct ms02nv_private *mp = mtd->priv;
+
+	if (to + len > mtd->size)
+		return -EINVAL;
+
+	memcpy(mp->uaddr + to, buf, len);
+	*retlen = len;
+
+	return 0;
+}
+
+
+static inline uint ms02nv_probe_one(ulong addr)
+{
+	ms02nv_uint *ms02nv_diagp;
+	ms02nv_uint *ms02nv_magicp;
+	uint ms02nv_diag;
+	uint ms02nv_magic;
+	size_t size;
+
+	int err;
+
+	/*
+	 * The firmware writes MS02NV_ID at MS02NV_MAGIC and also
+	 * a diagnostic status at MS02NV_DIAG.
+	 */
+	ms02nv_diagp = (ms02nv_uint *)(KSEG1ADDR(addr + MS02NV_DIAG));
+	ms02nv_magicp = (ms02nv_uint *)(KSEG1ADDR(addr + MS02NV_MAGIC));
+	err = get_dbe(ms02nv_magic, ms02nv_magicp);
+	if (err)
+		return 0;
+	if (ms02nv_magic != MS02NV_ID)
+		return 0;
+
+	ms02nv_diag = *ms02nv_diagp;
+	size = (ms02nv_diag & MS02NV_DIAG_SIZE_MASK) << MS02NV_DIAG_SIZE_SHIFT;
+	if (size > MS02NV_CSR)
+		size = MS02NV_CSR;
+
+	return size;
+}
+
+static int __init ms02nv_init_one(ulong addr)
+{
+	struct mtd_info *mtd;
+	struct ms02nv_private *mp;
+	struct resource *mod_res;
+	struct resource *diag_res;
+	struct resource *user_res;
+	struct resource *csr_res;
+	ulong fixaddr;
+	size_t size, fixsize;
+
+	static int version_printed;
+
+	int ret = -ENODEV;
+
+	/* The module decodes 8MiB of address space. */
+	mod_res = kmalloc(sizeof(*mod_res), GFP_KERNEL);
+	if (!mod_res)
+		return -ENOMEM;
+
+	memset(mod_res, 0, sizeof(*mod_res));
+	mod_res->name = ms02nv_name;
+	mod_res->start = addr;
+	mod_res->end = addr + MS02NV_SLOT_SIZE - 1;
+	mod_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, mod_res) < 0)
+		goto err_out_mod_res;
+
+	size = ms02nv_probe_one(addr);
+	if (!size)
+		goto err_out_mod_res_rel;
+
+	if (!version_printed) {
+		printk(KERN_INFO "%s", version);
+		version_printed = 1;
+	}
+
+	ret = -ENOMEM;
+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+	if (!mtd)
+		goto err_out_mod_res_rel;
+	memset(mtd, 0, sizeof(*mtd));
+	mp = kmalloc(sizeof(*mp), GFP_KERNEL);
+	if (!mp)
+		goto err_out_mtd;
+	memset(mp, 0, sizeof(*mp));
+
+	mtd->priv = mp;
+	mp->resource.module = mod_res;
+
+	/* Firmware's diagnostic NVRAM area. */
+	diag_res = kmalloc(sizeof(*diag_res), GFP_KERNEL);
+	if (!diag_res)
+		goto err_out_mp;
+
+	memset(diag_res, 0, sizeof(*diag_res));
+	diag_res->name = ms02nv_res_diag_ram;
+	diag_res->start = addr;
+	diag_res->end = addr + MS02NV_RAM - 1;
+	diag_res->flags = IORESOURCE_BUSY;
+	request_resource(mod_res, diag_res);
+
+	mp->resource.diag_ram = diag_res;
+
+	/* User-available general-purpose NVRAM area. */
+	user_res = kmalloc(sizeof(*user_res), GFP_KERNEL);
+	if (!user_res)
+		goto err_out_diag_res;
+
+	memset(user_res, 0, sizeof(*user_res));
+	user_res->name = ms02nv_res_user_ram;
+	user_res->start = addr + MS02NV_RAM;
+	user_res->end = addr + size - 1;
+	user_res->flags = IORESOURCE_BUSY;
+	request_resource(mod_res, user_res);
+
+	mp->resource.user_ram = user_res;
+
+	/* Control and status register. */
+	csr_res = kmalloc(sizeof(*csr_res), GFP_KERNEL);
+	if (!csr_res)
+		goto err_out_user_res;
+
+	memset(csr_res, 0, sizeof(*csr_res));
+	csr_res->name = ms02nv_res_csr;
+	csr_res->start = addr + MS02NV_CSR;
+	csr_res->end = addr + MS02NV_CSR + 3;
+	csr_res->flags = IORESOURCE_BUSY;
+	request_resource(mod_res, csr_res);
+
+	mp->resource.csr = csr_res;
+
+	mp->addr = phys_to_virt(addr);
+	mp->size = size;
+
+	/*
+	 * Hide the firmware's diagnostic area.  It may get destroyed
+	 * upon a reboot.  Take paging into account for mapping support.
+	 */
+	fixaddr = (addr + MS02NV_RAM + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1);
+	fixsize = (size - (fixaddr - addr)) & ~(PAGE_SIZE - 1);
+	mp->uaddr = phys_to_virt(fixaddr);
+
+	mtd->type = MTD_RAM;
+	mtd->flags = MTD_CAP_RAM | MTD_XIP;
+	mtd->size = fixsize;
+	mtd->name = (char *)ms02nv_name;
+	mtd->owner = THIS_MODULE;
+	mtd->read = ms02nv_read;
+	mtd->write = ms02nv_write;
+
+	ret = -EIO;
+	if (add_mtd_device(mtd)) {
+		printk(KERN_ERR
+			"ms02-nv: Unable to register MTD device, aborting!\n");
+		goto err_out_csr_res;
+	}
+
+	printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMiB.\n",
+		mtd->index, ms02nv_name, addr, size >> 20);
+
+	mp->next = root_ms02nv_mtd;
+	root_ms02nv_mtd = mtd;
+
+	return 0;
+
+
+err_out_csr_res:
+	release_resource(csr_res);
+	kfree(csr_res);
+err_out_user_res:
+	release_resource(user_res);
+	kfree(user_res);
+err_out_diag_res:
+	release_resource(diag_res);
+	kfree(diag_res);
+err_out_mp:
+	kfree(mp);
+err_out_mtd:
+	kfree(mtd);
+err_out_mod_res_rel:
+	release_resource(mod_res);
+err_out_mod_res:
+	kfree(mod_res);
+	return ret;
+}
+
+static void __exit ms02nv_remove_one(void)
+{
+	struct mtd_info *mtd = root_ms02nv_mtd;
+	struct ms02nv_private *mp = mtd->priv;
+
+	root_ms02nv_mtd = mp->next;
+
+	del_mtd_device(mtd);
+
+	release_resource(mp->resource.csr);
+	kfree(mp->resource.csr);
+	release_resource(mp->resource.user_ram);
+	kfree(mp->resource.user_ram);
+	release_resource(mp->resource.diag_ram);
+	kfree(mp->resource.diag_ram);
+	release_resource(mp->resource.module);
+	kfree(mp->resource.module);
+	kfree(mp);
+	kfree(mtd);
+}
+
+
+static int __init ms02nv_init(void)
+{
+	volatile u32 *csr;
+	uint stride = 0;
+	int count = 0;
+	int i;
+
+	switch (mips_machtype) {
+	case MACH_DS5000_200:
+		csr = (volatile u32 *)KN02_CSR_BASE;
+		if (*csr & KN02_CSR_BNK32M)
+			stride = 2;
+		break;
+	case MACH_DS5000_2X0:
+	case MACH_DS5900:
+		csr = (volatile u32 *)KN03_MCR_BASE;
+		if (*csr & KN03_MCR_BNK32M)
+			stride = 2;
+		break;
+	default:
+		return -ENODEV;
+		break;
+	}
+
+	for (i = 0; i < (sizeof(ms02nv_addrs) / sizeof(*ms02nv_addrs)); i++)
+		if (!ms02nv_init_one(ms02nv_addrs[i] << stride))
+			count++;
+
+	return (count > 0) ? 0 : -ENODEV;
+}
+
+static void __exit ms02nv_cleanup(void)
+{
+	while (root_ms02nv_mtd)
+		ms02nv_remove_one();
+}
+
+
+module_init(ms02nv_init);
+module_exit(ms02nv_cleanup);
diff --git a/drivers/mtd/devices/ms02-nv.h b/drivers/mtd/devices/ms02-nv.h
new file mode 100644
index 000000000000..8a6eef7cfee3
--- /dev/null
+++ b/drivers/mtd/devices/ms02-nv.h
@@ -0,0 +1,107 @@
+/*
+ *	Copyright (c) 2001, 2003  Maciej W. Rozycki
+ *
+ *	DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for
+ *	DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260
+ *	systems.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	$Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
+ */
+
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+
+/*
+ * Addresses are decoded as follows:
+ *
+ * 0x000000 - 0x3fffff	SRAM
+ * 0x400000 - 0x7fffff	CSR
+ *
+ * Within the SRAM area the following ranges are forced by the system
+ * firmware:
+ *
+ * 0x000000 - 0x0003ff	diagnostic area, destroyed upon a reboot
+ * 0x000400 - ENDofRAM	storage area, available to operating systems
+ *
+ * but we can't really use the available area right from 0x000400 as
+ * the first word is used by the firmware as a status flag passed
+ * from an operating system.  If anything but the valid data magic
+ * ID value is found, the firmware considers the SRAM clean, i.e.
+ * containing no valid data, and disables the battery resulting in
+ * data being erased as soon as power is switched off.  So the choice
+ * for the start address of the user-available is 0x001000 which is
+ * nicely page aligned.  The area between 0x000404 and 0x000fff may
+ * be used by the driver for own needs.
+ *
+ * The diagnostic area defines two status words to be read by an
+ * operating system, a magic ID to distinguish a MS02-NV board from
+ * anything else and a status information providing results of tests
+ * as well as the size of SRAM available, which can be 1MiB or 2MiB
+ * (that's what the firmware handles; no idea if 2MiB modules ever
+ * existed).
+ *
+ * The firmware only handles the MS02-NV board if installed in the
+ * last (15th) slot, so for any other location the status information
+ * stored in the SRAM cannot be relied upon.  But from the hardware
+ * point of view there is no problem using up to 14 such boards in a
+ * system -- only the 1st slot needs to be filled with a DRAM module.
+ * The MS02-NV board is ECC-protected, like other MS02 memory boards.
+ *
+ * The state of the battery as provided by the CSR is reflected on
+ * the two onboard LEDs.  When facing the battery side of the board,
+ * with the LEDs at the top left and the battery at the bottom right
+ * (i.e. looking from the back side of the system box), their meaning
+ * is as follows (the system has to be powered on):
+ *
+ * left LED		battery disable status: lit = enabled
+ * right LED		battery condition status: lit = OK
+ */
+
+/* MS02-NV iomem register offsets. */
+#define MS02NV_CSR		0x400000	/* control & status register */
+
+/* MS02-NV CSR status bits. */
+#define MS02NV_CSR_BATT_OK	0x01		/* battery OK */
+#define MS02NV_CSR_BATT_OFF	0x02		/* battery disabled */
+
+
+/* MS02-NV memory offsets. */
+#define MS02NV_DIAG		0x0003f8	/* diagnostic status */
+#define MS02NV_MAGIC		0x0003fc	/* MS02-NV magic ID */
+#define MS02NV_VALID		0x000400	/* valid data magic ID */
+#define MS02NV_RAM		0x001000	/* user-exposed RAM start */
+
+/* MS02-NV diagnostic status bits. */
+#define MS02NV_DIAG_TEST	0x01		/* SRAM test done (?) */
+#define MS02NV_DIAG_RO		0x02		/* SRAM r/o test done */
+#define MS02NV_DIAG_RW		0x04		/* SRAM r/w test done */
+#define MS02NV_DIAG_FAIL	0x08		/* SRAM test failed */
+#define MS02NV_DIAG_SIZE_MASK	0xf0		/* SRAM size mask */
+#define MS02NV_DIAG_SIZE_SHIFT	0x10		/* SRAM size shift (left) */
+
+/* MS02-NV general constants. */
+#define MS02NV_ID		0x03021966	/* MS02-NV magic ID value */
+#define MS02NV_VALID_ID		0xbd100248	/* valid data magic ID value */
+#define MS02NV_SLOT_SIZE	0x800000	/* size of the address space
+						   decoded by the module */
+
+
+typedef volatile u32 ms02nv_uint;
+
+struct ms02nv_private {
+	struct mtd_info *next;
+	struct {
+		struct resource *module;
+		struct resource *diag_ram;
+		struct resource *user_ram;
+		struct resource *csr;
+	} resource;
+	u_char *addr;
+	size_t size;
+	u_char *uaddr;
+};
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
new file mode 100644
index 000000000000..edac4156d69c
--- /dev/null
+++ b/drivers/mtd/devices/mtdram.c
@@ -0,0 +1,235 @@
+/*
+ * mtdram - a test mtd device
+ * $Id: mtdram.c,v 1.35 2005/01/05 18:05:12 dwmw2 Exp $
+ * Author: Alexander Larsson <alex@cendio.se>
+ *
+ * Copyright (c) 1999 Alexander Larsson <alex@cendio.se>
+ *
+ * This code is GPL
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/mtd/mtd.h>
+
+#ifndef CONFIG_MTDRAM_ABS_POS
+  #define CONFIG_MTDRAM_ABS_POS 0
+#endif
+
+#if CONFIG_MTDRAM_ABS_POS > 0
+  #include <asm/io.h>
+#endif
+
+#ifdef MODULE
+static unsigned long total_size = CONFIG_MTDRAM_TOTAL_SIZE;
+static unsigned long erase_size = CONFIG_MTDRAM_ERASE_SIZE;
+module_param(total_size,ulong,0);
+MODULE_PARM_DESC(total_size, "Total device size in KiB");
+module_param(erase_size,ulong,0);
+MODULE_PARM_DESC(erase_size, "Device erase block size in KiB");
+#define MTDRAM_TOTAL_SIZE (total_size * 1024)
+#define MTDRAM_ERASE_SIZE (erase_size * 1024)
+#else
+#define MTDRAM_TOTAL_SIZE (CONFIG_MTDRAM_TOTAL_SIZE * 1024)
+#define MTDRAM_ERASE_SIZE (CONFIG_MTDRAM_ERASE_SIZE * 1024)
+#endif
+
+
+// We could store these in the mtd structure, but we only support 1 device..
+static struct mtd_info *mtd_info;
+
+
+static int
+ram_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+  DEBUG(MTD_DEBUG_LEVEL2, "ram_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len);
+  if (instr->addr + instr->len > mtd->size) {
+    DEBUG(MTD_DEBUG_LEVEL1, "ram_erase() out of bounds (%ld > %ld)\n", (long)(instr->addr + instr->len), (long)mtd->size);
+    return -EINVAL;
+  }
+	
+  memset((char *)mtd->priv + instr->addr, 0xff, instr->len);
+	
+  instr->state = MTD_ERASE_DONE;
+  mtd_erase_callback(instr);
+
+  return 0;
+}
+
+static int ram_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+{
+  if (from + len > mtd->size)
+    return -EINVAL;
+	
+  *mtdbuf = mtd->priv + from;
+  *retlen = len;
+  return 0;
+}
+
+static void ram_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from,
+			 size_t len)
+{
+  DEBUG(MTD_DEBUG_LEVEL2, "ram_unpoint\n");
+}
+
+static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
+	     size_t *retlen, u_char *buf)
+{
+  DEBUG(MTD_DEBUG_LEVEL2, "ram_read(pos:%ld, len:%ld)\n", (long)from, (long)len);
+  if (from + len > mtd->size) {
+    DEBUG(MTD_DEBUG_LEVEL1, "ram_read() out of bounds (%ld > %ld)\n", (long)(from + len), (long)mtd->size);
+    return -EINVAL;
+  }
+
+  memcpy(buf, mtd->priv + from, len);
+
+  *retlen=len;
+  return 0;
+}
+
+static int ram_write(struct mtd_info *mtd, loff_t to, size_t len,
+	      size_t *retlen, const u_char *buf)
+{
+  DEBUG(MTD_DEBUG_LEVEL2, "ram_write(pos:%ld, len:%ld)\n", (long)to, (long)len);
+  if (to + len > mtd->size) {
+    DEBUG(MTD_DEBUG_LEVEL1, "ram_write() out of bounds (%ld > %ld)\n", (long)(to + len), (long)mtd->size);
+    return -EINVAL;
+  }
+
+  memcpy ((char *)mtd->priv + to, buf, len);
+
+  *retlen=len;
+  return 0;
+}
+
+static void __exit cleanup_mtdram(void)
+{
+  if (mtd_info) {
+    del_mtd_device(mtd_info);
+#if CONFIG_MTDRAM_TOTAL_SIZE > 0
+    if (mtd_info->priv)
+#if CONFIG_MTDRAM_ABS_POS > 0
+      iounmap(mtd_info->priv);
+#else
+      vfree(mtd_info->priv);
+#endif	
+#endif
+    kfree(mtd_info);
+  }
+}
+
+int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, 
+                       unsigned long size, char *name)
+{
+   memset(mtd, 0, sizeof(*mtd));
+
+   /* Setup the MTD structure */
+   mtd->name = name;
+   mtd->type = MTD_RAM;
+   mtd->flags = MTD_CAP_RAM;
+   mtd->size = size;
+   mtd->erasesize = MTDRAM_ERASE_SIZE;
+   mtd->priv = mapped_address;
+
+   mtd->owner = THIS_MODULE;
+   mtd->erase = ram_erase;
+   mtd->point = ram_point;
+   mtd->unpoint = ram_unpoint;
+   mtd->read = ram_read;
+   mtd->write = ram_write;
+
+   if (add_mtd_device(mtd)) {
+     return -EIO;
+   }
+   
+   return 0;
+}
+
+#if CONFIG_MTDRAM_TOTAL_SIZE > 0
+#if CONFIG_MTDRAM_ABS_POS > 0
+static int __init init_mtdram(void)
+{
+  void *addr;
+  int err;
+  /* Allocate some memory */
+   mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+   if (!mtd_info)
+     return -ENOMEM;
+   
+  addr = ioremap(CONFIG_MTDRAM_ABS_POS, MTDRAM_TOTAL_SIZE);
+  if (!addr) {
+    DEBUG(MTD_DEBUG_LEVEL1, 
+          "Failed to ioremap) memory region of size %ld at ABS_POS:%ld\n", 
+          (long)MTDRAM_TOTAL_SIZE, (long)CONFIG_MTDRAM_ABS_POS);
+    kfree(mtd_info);
+    mtd_info = NULL;
+    return -ENOMEM;
+  }
+  err = mtdram_init_device(mtd_info, addr, 
+                           MTDRAM_TOTAL_SIZE, "mtdram test device");
+  if (err) 
+  {
+    iounmap(addr);
+    kfree(mtd_info);
+    mtd_info = NULL;
+    return err;
+  }
+  memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE);
+  return err;
+}
+
+#else /* CONFIG_MTDRAM_ABS_POS > 0 */
+
+static int __init init_mtdram(void)
+{
+  void *addr;
+  int err;
+  /* Allocate some memory */
+   mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+   if (!mtd_info)
+     return -ENOMEM;
+
+  addr = vmalloc(MTDRAM_TOTAL_SIZE);
+  if (!addr) {
+    DEBUG(MTD_DEBUG_LEVEL1, 
+          "Failed to vmalloc memory region of size %ld\n", 
+          (long)MTDRAM_TOTAL_SIZE);
+    kfree(mtd_info);
+    mtd_info = NULL;
+    return -ENOMEM;
+  }
+  err = mtdram_init_device(mtd_info, addr, 
+                           MTDRAM_TOTAL_SIZE, "mtdram test device");
+  if (err) 
+  {
+    vfree(addr);
+    kfree(mtd_info);
+    mtd_info = NULL;
+    return err;
+  }
+  memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE);
+  return err;
+}
+#endif /* !(CONFIG_MTDRAM_ABS_POS > 0) */
+
+#else /* CONFIG_MTDRAM_TOTAL_SIZE > 0 */
+
+static int __init init_mtdram(void)
+{
+  return 0;
+}
+#endif /* !(CONFIG_MTDRAM_TOTAL_SIZE > 0) */
+
+module_init(init_mtdram);
+module_exit(cleanup_mtdram);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Larsson <alexl@redhat.com>");
+MODULE_DESCRIPTION("Simulated MTD driver for testing");
+
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
new file mode 100644
index 000000000000..5f8e164ddb71
--- /dev/null
+++ b/drivers/mtd/devices/phram.c
@@ -0,0 +1,285 @@
+/**
+ * $Id: phram.c,v 1.11 2005/01/05 18:05:13 dwmw2 Exp $
+ *
+ * Copyright (c) ????		Jochen Sch�uble <psionic@psionic.de>
+ * Copyright (c) 2003-2004	J�rn Engel <joern@wh.fh-wedel.de>
+ *
+ * Usage:
+ *
+ * one commend line parameter per device, each in the form:
+ *   phram=<name>,<start>,<len>
+ * <name> may be up to 63 characters.
+ * <start> and <len> can be octal, decimal or hexadecimal.  If followed
+ * by "ki", "Mi" or "Gi", the numbers will be interpreted as kilo, mega or
+ * gigabytes.
+ *
+ * Example:
+ *	phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mtd/mtd.h>
+
+#define ERROR(fmt, args...) printk(KERN_ERR "phram: " fmt , ## args)
+
+struct phram_mtd_list {
+	struct mtd_info mtd;
+	struct list_head list;
+};
+
+static LIST_HEAD(phram_list);
+
+
+
+static int phram_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	u_char *start = mtd->priv;
+
+	if (instr->addr + instr->len > mtd->size)
+		return -EINVAL;
+	
+	memset(start + instr->addr, 0xff, instr->len);
+
+	/* This'll catch a few races. Free the thing before returning :) 
+	 * I don't feel at all ashamed. This kind of thing is possible anyway
+	 * with flash, but unlikely.
+	 */
+
+	instr->state = MTD_ERASE_DONE;
+
+	mtd_erase_callback(instr);
+
+	return 0;
+}
+
+static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char **mtdbuf)
+{
+	u_char *start = mtd->priv;
+
+	if (from + len > mtd->size)
+		return -EINVAL;
+	
+	*mtdbuf = start + from;
+	*retlen = len;
+	return 0;
+}
+
+static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+{
+}
+
+static int phram_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf)
+{
+	u_char *start = mtd->priv;
+
+	if (from + len > mtd->size)
+		return -EINVAL;
+	
+	memcpy(buf, start + from, len);
+
+	*retlen = len;
+	return 0;
+}
+
+static int phram_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
+{
+	u_char *start = mtd->priv;
+
+	if (to + len > mtd->size)
+		return -EINVAL;
+	
+	memcpy(start + to, buf, len);
+
+	*retlen = len;
+	return 0;
+}
+
+
+
+static void unregister_devices(void)
+{
+	struct phram_mtd_list *this;
+
+	list_for_each_entry(this, &phram_list, list) {
+		del_mtd_device(&this->mtd);
+		iounmap(this->mtd.priv);
+		kfree(this);
+	}
+}
+
+static int register_device(char *name, unsigned long start, unsigned long len)
+{
+	struct phram_mtd_list *new;
+	int ret = -ENOMEM;
+
+	new = kmalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		goto out0;
+
+	memset(new, 0, sizeof(*new));
+
+	ret = -EIO;
+	new->mtd.priv = ioremap(start, len);
+	if (!new->mtd.priv) {
+		ERROR("ioremap failed\n");
+		goto out1;
+	}
+
+
+	new->mtd.name = name;
+	new->mtd.size = len;
+	new->mtd.flags = MTD_CAP_RAM | MTD_ERASEABLE | MTD_VOLATILE;
+        new->mtd.erase = phram_erase;
+	new->mtd.point = phram_point;
+	new->mtd.unpoint = phram_unpoint;
+	new->mtd.read = phram_read;
+	new->mtd.write = phram_write;
+	new->mtd.owner = THIS_MODULE;
+	new->mtd.type = MTD_RAM;
+	new->mtd.erasesize = 0;
+
+	ret = -EAGAIN;
+	if (add_mtd_device(&new->mtd)) {
+		ERROR("Failed to register new device\n");
+		goto out2;
+	}
+
+	list_add_tail(&new->list, &phram_list);
+	return 0;	
+
+out2:
+	iounmap(new->mtd.priv);
+out1:
+	kfree(new);
+out0:
+	return ret;
+}
+
+static int ustrtoul(const char *cp, char **endp, unsigned int base)
+{
+	unsigned long result = simple_strtoul(cp, endp, base);
+
+	switch (**endp) {
+	case 'G':
+		result *= 1024;
+	case 'M':
+		result *= 1024;
+	case 'k':
+		result *= 1024;
+	/* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
+		if ((*endp)[1] == 'i')
+			(*endp) += 2;
+	}
+	return result;
+}
+
+static int parse_num32(uint32_t *num32, const char *token)
+{
+	char *endp;
+	unsigned long n;
+
+	n = ustrtoul(token, &endp, 0);
+	if (*endp)
+		return -EINVAL;
+
+	*num32 = n;
+	return 0;
+}
+
+static int parse_name(char **pname, const char *token)
+{
+	size_t len;
+	char *name;
+
+	len = strlen(token) + 1;
+	if (len > 64)
+		return -ENOSPC;
+
+	name = kmalloc(len, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+
+	strcpy(name, token);
+
+	*pname = name;
+	return 0;
+}
+
+#define parse_err(fmt, args...) do {	\
+	ERROR(fmt , ## args);	\
+	return 0;		\
+} while (0)
+
+static int phram_setup(const char *val, struct kernel_param *kp)
+{
+	char buf[64+12+12], *str = buf;
+	char *token[3];
+	char *name;
+	uint32_t start;
+	uint32_t len;
+	int i, ret;
+
+	if (strnlen(val, sizeof(buf)) >= sizeof(buf))
+		parse_err("parameter too long\n");
+
+	strcpy(str, val);
+
+	for (i=0; i<3; i++)
+		token[i] = strsep(&str, ",");
+
+	if (str)
+		parse_err("too many arguments\n");
+
+	if (!token[2])
+		parse_err("not enough arguments\n");
+
+	ret = parse_name(&name, token[0]);
+	if (ret == -ENOMEM)
+		parse_err("out of memory\n");
+	if (ret == -ENOSPC)
+		parse_err("name too long\n");
+	if (ret)
+		return 0;
+
+	ret = parse_num32(&start, token[1]);
+	if (ret)
+		parse_err("illegal start address\n");
+
+	ret = parse_num32(&len, token[2]);
+	if (ret)
+		parse_err("illegal device length\n");
+
+	register_device(name, start, len);
+
+	return 0;
+}
+
+module_param_call(phram, phram_setup, NULL, NULL, 000);
+MODULE_PARM_DESC(phram,"Memory region to map. \"map=<name>,<start>,<length>\"");
+
+
+static int __init init_phram(void)
+{
+	return 0;
+}
+
+static void __exit cleanup_phram(void)
+{
+	unregister_devices();
+}
+
+module_init(init_phram);
+module_exit(cleanup_phram);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("J�rn Engel <joern@wh.fh-wedel.de>");
+MODULE_DESCRIPTION("MTD driver for physical RAM");
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
new file mode 100644
index 000000000000..5b3defadf884
--- /dev/null
+++ b/drivers/mtd/devices/pmc551.c
@@ -0,0 +1,843 @@
+/*
+ * $Id: pmc551.c,v 1.30 2005/01/05 18:05:13 dwmw2 Exp $
+ *
+ * PMC551 PCI Mezzanine Ram Device
+ *
+ * Author:
+ *       Mark Ferrell <mferrell@mvista.com>
+ *       Copyright 1999,2000 Nortel Networks
+ *
+ * License:
+ *	 As part of this driver was derived from the slram.c driver it
+ *	 falls under the same license, which is GNU General Public
+ *	 License v2
+ *
+ * Description:
+ *	 This driver is intended to support the PMC551 PCI Ram device
+ *	 from Ramix Inc.  The PMC551 is a PMC Mezzanine module for
+ *	 cPCI embedded systems.  The device contains a single SROM
+ *	 that initially programs the V370PDC chipset onboard the
+ *	 device, and various banks of DRAM/SDRAM onboard.  This driver
+ *	 implements this PCI Ram device as an MTD (Memory Technology
+ *	 Device) so that it can be used to hold a file system, or for
+ *	 added swap space in embedded systems.  Since the memory on
+ *	 this board isn't as fast as main memory we do not try to hook
+ *	 it into main memory as that would simply reduce performance
+ *	 on the system.  Using it as a block device allows us to use
+ *	 it as high speed swap or for a high speed disk device of some
+ *	 sort.  Which becomes very useful on diskless systems in the
+ *	 embedded market I might add.
+ *	 
+ * Notes:
+ *	 Due to what I assume is more buggy SROM, the 64M PMC551 I
+ *	 have available claims that all 4 of it's DRAM banks have 64M
+ *	 of ram configured (making a grand total of 256M onboard).
+ *	 This is slightly annoying since the BAR0 size reflects the
+ *	 aperture size, not the dram size, and the V370PDC supplies no
+ *	 other method for memory size discovery.  This problem is
+ *	 mostly only relevant when compiled as a module, as the
+ *	 unloading of the module with an aperture size smaller then
+ *	 the ram will cause the driver to detect the onboard memory
+ *	 size to be equal to the aperture size when the module is
+ *	 reloaded.  Soooo, to help, the module supports an msize
+ *	 option to allow the specification of the onboard memory, and
+ *	 an asize option, to allow the specification of the aperture
+ *	 size.  The aperture must be equal to or less then the memory
+ *	 size, the driver will correct this if you screw it up.  This
+ *	 problem is not relevant for compiled in drivers as compiled
+ *	 in drivers only init once.
+ *
+ * Credits:
+ *       Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the
+ *       initial example code of how to initialize this device and for
+ *       help with questions I had concerning operation of the device.
+ *
+ *       Most of the MTD code for this driver was originally written
+ *       for the slram.o module in the MTD drivers package which
+ *       allows the mapping of system memory into an MTD device.
+ *       Since the PMC551 memory module is accessed in the same
+ *       fashion as system memory, the slram.c code became a very nice
+ *       fit to the needs of this driver.  All we added was PCI
+ *       detection/initialization to the driver and automatically figure
+ *       out the size via the PCI detection.o, later changes by Corey
+ *       Minyard set up the card to utilize a 1M sliding apature.
+ *
+ *	 Corey Minyard <minyard@nortelnetworks.com>
+ *       * Modified driver to utilize a sliding aperture instead of 
+ *         mapping all memory into kernel space which turned out to
+ *         be very wasteful.
+ *       * Located a bug in the SROM's initialization sequence that 
+ *         made the memory unusable, added a fix to code to touch up
+ *         the DRAM some.
+ *
+ * Bugs/FIXME's:
+ *       * MUST fix the init function to not spin on a register
+ *       waiting for it to set .. this does not safely handle busted
+ *       devices that never reset the register correctly which will
+ *       cause the system to hang w/ a reboot being the only chance at
+ *       recover. [sort of fixed, could be better]
+ *       * Add I2C handling of the SROM so we can read the SROM's information
+ *       about the aperture size.  This should always accurately reflect the
+ *       onboard memory size.
+ *       * Comb the init routine.  It's still a bit cludgy on a few things.
+ */
+
+#include <linux/version.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/pci.h>
+
+#ifndef CONFIG_PCI
+#error Enable PCI in your kernel config
+#endif
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/pmc551.h>
+#include <linux/mtd/compatmac.h>
+
+static struct mtd_info *pmc551list;
+
+static int pmc551_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+        struct mypriv *priv = mtd->priv;
+        u32 soff_hi, soff_lo; /* start address offset hi/lo */
+        u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+        unsigned long end;
+	u_char *ptr;
+	size_t retlen;
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len);
+#endif
+
+        end = instr->addr + instr->len - 1;
+
+        /* Is it past the end? */
+        if ( end > mtd->size ) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", (long)end, (long)mtd->size);
+#endif
+                return -EINVAL;
+        }
+
+        eoff_hi = end & ~(priv->asize - 1);
+        soff_hi = instr->addr & ~(priv->asize - 1);
+        eoff_lo = end & (priv->asize - 1);
+        soff_lo = instr->addr & (priv->asize - 1);
+
+	pmc551_point (mtd, instr->addr, instr->len, &retlen, &ptr);
+
+        if ( soff_hi == eoff_hi || mtd->size == priv->asize) {
+                /* The whole thing fits within one access, so just one shot
+                   will do it. */
+                memset(ptr, 0xff, instr->len);
+        } else {
+                /* We have to do multiple writes to get all the data
+                   written. */
+                while (soff_hi != eoff_hi) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+			printk( KERN_DEBUG "pmc551_erase() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+#endif
+                        memset(ptr, 0xff, priv->asize);
+                        if (soff_hi + priv->asize >= mtd->size) {
+                                goto out;
+                        }
+                        soff_hi += priv->asize;
+			pmc551_point (mtd,(priv->base_map0|soff_hi),
+				      priv->asize, &retlen, &ptr);
+                }
+                memset (ptr, 0xff, eoff_lo);
+        }
+
+out:
+	instr->state = MTD_ERASE_DONE;
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_erase() done\n");
+#endif
+
+        mtd_erase_callback(instr);
+        return 0;
+}
+
+
+static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+{
+        struct mypriv *priv = mtd->priv;
+        u32 soff_hi;
+        u32 soff_lo;
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
+#endif
+
+	if (from + len > mtd->size) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+		printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", (long)from+len, (long)mtd->size);
+#endif
+		return -EINVAL;
+	}
+
+        soff_hi = from & ~(priv->asize - 1);
+        soff_lo = from & (priv->asize - 1);
+
+	/* Cheap hack optimization */
+	if( priv->curr_map0 != from ) {
+        	pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0,
+                                 	(priv->base_map0 | soff_hi) );
+		priv->curr_map0 = soff_hi;
+	}
+
+	*mtdbuf = priv->start + soff_lo;
+	*retlen = len;
+	return 0;
+}
+
+
+static void pmc551_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+{
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_unpoint()\n");
+#endif
+}
+
+
+static int pmc551_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+        struct mypriv *priv = mtd->priv;
+        u32 soff_hi, soff_lo; /* start address offset hi/lo */
+        u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+        unsigned long end;
+	u_char *ptr;
+        u_char *copyto = buf;
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", (long)from, (long)len, (long)priv->asize);
+#endif
+
+        end = from + len - 1;
+
+        /* Is it past the end? */
+        if (end > mtd->size) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", (long) end, (long)mtd->size);
+#endif
+                return -EINVAL;
+        }
+
+        soff_hi = from & ~(priv->asize - 1);
+        eoff_hi = end & ~(priv->asize - 1);
+        soff_lo = from & (priv->asize - 1);
+        eoff_lo = end & (priv->asize - 1);
+
+	pmc551_point (mtd, from, len, retlen, &ptr);
+
+        if (soff_hi == eoff_hi) {
+                /* The whole thing fits within one access, so just one shot
+                   will do it. */
+                memcpy(copyto, ptr, len);
+                copyto += len;
+        } else {
+                /* We have to do multiple writes to get all the data
+                   written. */
+                while (soff_hi != eoff_hi) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+			printk( KERN_DEBUG "pmc551_read() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+#endif
+                        memcpy(copyto, ptr, priv->asize);
+                        copyto += priv->asize;
+                        if (soff_hi + priv->asize >= mtd->size) {
+                                goto out;
+                        }
+                        soff_hi += priv->asize;
+			pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr);
+                }
+                memcpy(copyto, ptr, eoff_lo);
+                copyto += eoff_lo;
+        }
+
+out:
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_read() done\n");
+#endif
+        *retlen = copyto - buf;
+        return 0;
+}
+
+static int pmc551_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+{
+        struct mypriv *priv = mtd->priv;
+        u32 soff_hi, soff_lo; /* start address offset hi/lo */
+        u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+        unsigned long end;
+	u_char *ptr;
+        const u_char *copyfrom = buf;
+
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", (long)to, (long)len, (long)priv->asize);
+#endif
+
+        end = to + len - 1;
+        /* Is it past the end?  or did the u32 wrap? */
+        if (end > mtd->size ) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, size: %ld, to: %ld)\n", (long) end, (long)mtd->size, (long)to);
+#endif
+                return -EINVAL;
+        }
+
+        soff_hi = to & ~(priv->asize - 1);
+        eoff_hi = end & ~(priv->asize - 1);
+        soff_lo = to & (priv->asize - 1);
+        eoff_lo = end & (priv->asize - 1);
+
+	pmc551_point (mtd, to, len, retlen, &ptr);
+
+        if (soff_hi == eoff_hi) {
+                /* The whole thing fits within one access, so just one shot
+                   will do it. */
+                memcpy(ptr, copyfrom, len);
+                copyfrom += len;
+        } else {
+                /* We have to do multiple writes to get all the data
+                   written. */
+                while (soff_hi != eoff_hi) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+			printk( KERN_DEBUG "pmc551_write() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+#endif
+                	memcpy(ptr, copyfrom, priv->asize);
+                	copyfrom += priv->asize;
+                        if (soff_hi >= mtd->size) {
+                                goto out;
+                        }
+                        soff_hi += priv->asize;
+			pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr);
+                }
+                memcpy(ptr, copyfrom, eoff_lo);
+                copyfrom += eoff_lo;
+        }
+
+out:
+#ifdef CONFIG_MTD_PMC551_DEBUG
+	printk(KERN_DEBUG "pmc551_write() done\n");
+#endif
+        *retlen = copyfrom - buf;
+        return 0;
+}
+
+/*
+ * Fixup routines for the V370PDC
+ * PCI device ID 0x020011b0
+ *
+ * This function basicly kick starts the DRAM oboard the card and gets it
+ * ready to be used.  Before this is done the device reads VERY erratic, so
+ * much that it can crash the Linux 2.2.x series kernels when a user cat's
+ * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL
+ * register.  FIXME: stop spinning on registers .. must implement a timeout
+ * mechanism
+ * returns the size of the memory region found.
+ */
+static u32 fixup_pmc551 (struct pci_dev *dev)
+{
+#ifdef CONFIG_MTD_PMC551_BUGFIX
+        u32 dram_data;
+#endif
+        u32 size, dcmd, cfg, dtmp;
+        u16 cmd, tmp, i;
+	u8 bcmd, counter;
+
+        /* Sanity Check */
+        if(!dev) {
+                return -ENODEV;
+        }
+
+	/*
+	 * Attempt to reset the card
+	 * FIXME: Stop Spinning registers
+	 */
+	counter=0;
+	/* unlock registers */
+	pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5 );
+	/* read in old data */
+	pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd );
+	/* bang the reset line up and down for a few */
+	for(i=0;i<10;i++) {
+		counter=0;
+		bcmd &= ~0x80;
+		while(counter++ < 100) {
+			pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
+		}
+		counter=0;
+		bcmd |= 0x80;
+		while(counter++ < 100) {
+			pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
+		}
+	}
+	bcmd |= (0x40|0x20);
+	pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
+
+        /* 
+	 * Take care and turn off the memory on the device while we
+	 * tweak the configurations
+	 */
+        pci_read_config_word(dev, PCI_COMMAND, &cmd);
+        tmp = cmd & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY);
+        pci_write_config_word(dev, PCI_COMMAND, tmp);
+
+	/*
+	 * Disable existing aperture before probing memory size
+	 */
+	pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd);
+        dtmp=(dcmd|PMC551_PCI_MEM_MAP_ENABLE|PMC551_PCI_MEM_MAP_REG_EN);
+	pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp);
+	/*
+	 * Grab old BAR0 config so that we can figure out memory size
+	 * This is another bit of kludge going on.  The reason for the
+	 * redundancy is I am hoping to retain the original configuration
+	 * previously assigned to the card by the BIOS or some previous 
+	 * fixup routine in the kernel.  So we read the old config into cfg,
+	 * then write all 1's to the memory space, read back the result into
+	 * "size", and then write back all the old config.
+	 */
+	pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &cfg );
+#ifndef CONFIG_MTD_PMC551_BUGFIX
+	pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, ~0 );
+	pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &size );
+	size = (size&PCI_BASE_ADDRESS_MEM_MASK);
+	size &= ~(size-1);
+	pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
+#else
+        /*
+         * Get the size of the memory by reading all the DRAM size values
+         * and adding them up.
+         *
+         * KLUDGE ALERT: the boards we are using have invalid column and
+         * row mux values.  We fix them here, but this will break other
+         * memory configurations.
+         */
+        pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data);
+        size = PMC551_DRAM_BLK_GET_SIZE(dram_data);
+        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+        pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data);
+
+        pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data);
+        size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+        pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data);
+
+        pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data);
+        size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+        pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data);
+
+        pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data);
+        size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+        dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+        dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+        pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data);
+
+        /*
+         * Oops .. something went wrong
+         */
+        if( (size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) {
+                return -ENODEV;
+        }
+#endif /* CONFIG_MTD_PMC551_BUGFIX */
+
+	if ((cfg&PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
+                return -ENODEV;
+	}
+
+        /*
+         * Precharge Dram
+         */
+        pci_write_config_word( dev, PMC551_SDRAM_MA, 0x0400 );
+        pci_write_config_word( dev, PMC551_SDRAM_CMD, 0x00bf );
+
+        /*
+         * Wait until command has gone through
+         * FIXME: register spinning issue
+         */
+        do {	pci_read_config_word( dev, PMC551_SDRAM_CMD, &cmd );
+		if(counter++ > 100)break;
+        } while ( (PCI_COMMAND_IO) & cmd );
+
+        /*
+	 * Turn on auto refresh 
+	 * The loop is taken directly from Ramix's example code.  I assume that
+	 * this must be held high for some duration of time, but I can find no
+	 * documentation refrencing the reasons why.
+         */
+        for ( i = 1; i<=8 ; i++) {
+                pci_write_config_word (dev, PMC551_SDRAM_CMD, 0x0df);
+
+                /*
+                 * Make certain command has gone through
+                 * FIXME: register spinning issue
+                 */
+		counter=0;
+                do {	pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+			if(counter++ > 100)break;
+                } while ( (PCI_COMMAND_IO) & cmd );
+        }
+
+        pci_write_config_word ( dev, PMC551_SDRAM_MA, 0x0020);
+        pci_write_config_word ( dev, PMC551_SDRAM_CMD, 0x0ff);
+
+        /*
+         * Wait until command completes
+         * FIXME: register spinning issue
+         */
+	counter=0;
+        do {	pci_read_config_word ( dev, PMC551_SDRAM_CMD, &cmd);
+		if(counter++ > 100)break;
+        } while ( (PCI_COMMAND_IO) & cmd );
+
+        pci_read_config_dword ( dev, PMC551_DRAM_CFG, &dcmd);
+        dcmd |= 0x02000000;
+        pci_write_config_dword ( dev, PMC551_DRAM_CFG, dcmd);
+
+        /*
+         * Check to make certain fast back-to-back, if not
+         * then set it so
+         */
+        pci_read_config_word( dev, PCI_STATUS, &cmd);
+        if((cmd&PCI_COMMAND_FAST_BACK) == 0) {
+                cmd |= PCI_COMMAND_FAST_BACK;
+                pci_write_config_word( dev, PCI_STATUS, cmd);
+        }
+
+        /*
+         * Check to make certain the DEVSEL is set correctly, this device
+         * has a tendancy to assert DEVSEL and TRDY when a write is performed
+         * to the memory when memory is read-only
+         */
+        if((cmd&PCI_STATUS_DEVSEL_MASK) != 0x0) {
+                cmd &= ~PCI_STATUS_DEVSEL_MASK;
+                pci_write_config_word( dev, PCI_STATUS, cmd );
+        }
+        /*
+         * Set to be prefetchable and put everything back based on old cfg.
+	 * it's possible that the reset of the V370PDC nuked the original
+	 * setup
+         */
+	/*
+        cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+	pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
+	*/
+
+        /*
+         * Turn PCI memory and I/O bus access back on
+         */
+        pci_write_config_word( dev, PCI_COMMAND,
+                               PCI_COMMAND_MEMORY | PCI_COMMAND_IO );
+#ifdef CONFIG_MTD_PMC551_DEBUG
+        /*
+         * Some screen fun
+         */
+        printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at 0x%lx\n",
+	       (size<1024)?size:(size<1048576)?size>>10:size>>20,
+               (size<1024)?'B':(size<1048576)?'K':'M',
+	       size, ((dcmd&(0x1<<3)) == 0)?"non-":"",
+               (dev->resource[0].start)&PCI_BASE_ADDRESS_MEM_MASK );
+
+        /*
+         * Check to see the state of the memory
+         */
+        pci_read_config_dword( dev, PMC551_DRAM_BLK0, &dcmd );
+        printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
+			  "pmc551: DRAM_BLK0 Size: %d at %d\n"
+			  "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n",
+               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
+               (((0x1<<0)&dcmd) == 0)?"Off":"On",
+	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
+	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
+
+        pci_read_config_dword( dev, PMC551_DRAM_BLK1, &dcmd );
+        printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
+			  "pmc551: DRAM_BLK1 Size: %d at %d\n"
+			  "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n",
+               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
+               (((0x1<<0)&dcmd) == 0)?"Off":"On",
+	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
+	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
+
+        pci_read_config_dword( dev, PMC551_DRAM_BLK2, &dcmd );
+        printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
+			  "pmc551: DRAM_BLK2 Size: %d at %d\n"
+			  "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n",
+               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
+               (((0x1<<0)&dcmd) == 0)?"Off":"On",
+	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
+	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
+
+        pci_read_config_dword( dev, PMC551_DRAM_BLK3, &dcmd );
+        printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
+			  "pmc551: DRAM_BLK3 Size: %d at %d\n"
+			  "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n",
+               (((0x1<<1)&dcmd) == 0)?"RW":"RO",
+               (((0x1<<0)&dcmd) == 0)?"Off":"On",
+	       PMC551_DRAM_BLK_GET_SIZE(dcmd),
+	       ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
+
+        pci_read_config_word( dev, PCI_COMMAND, &cmd );
+        printk( KERN_DEBUG "pmc551: Memory Access %s\n",
+                (((0x1<<1)&cmd) == 0)?"off":"on" );
+        printk( KERN_DEBUG "pmc551: I/O Access %s\n",
+                (((0x1<<0)&cmd) == 0)?"off":"on" );
+
+        pci_read_config_word( dev, PCI_STATUS, &cmd );
+        printk( KERN_DEBUG "pmc551: Devsel %s\n",
+                ((PCI_STATUS_DEVSEL_MASK&cmd)==0x000)?"Fast":
+                ((PCI_STATUS_DEVSEL_MASK&cmd)==0x200)?"Medium":
+                ((PCI_STATUS_DEVSEL_MASK&cmd)==0x400)?"Slow":"Invalid" );
+
+        printk( KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
+                ((PCI_COMMAND_FAST_BACK&cmd) == 0)?"Not ":"" );
+
+	pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd );
+	printk( KERN_DEBUG "pmc551: EEPROM is under %s control\n"
+			   "pmc551: System Control Register is %slocked to PCI access\n"
+			   "pmc551: System Control Register is %slocked to EEPROM access\n", 
+		(bcmd&0x1)?"software":"hardware",
+		(bcmd&0x20)?"":"un", (bcmd&0x40)?"":"un");
+#endif
+        return size;
+}
+
+/*
+ * Kernel version specific module stuffages
+ */
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Ferrell <mferrell@mvista.com>");
+MODULE_DESCRIPTION(PMC551_VERSION);
+
+/*
+ * Stuff these outside the ifdef so as to not bust compiled in driver support
+ */
+static int msize=0;
+#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
+static int asize=CONFIG_MTD_PMC551_APERTURE_SIZE
+#else
+static int asize=0;
+#endif
+
+module_param(msize, int, 0);
+MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]");
+module_param(asize, int, 0);
+MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
+
+/*
+ * PMC551 Card Initialization
+ */
+static int __init init_pmc551(void)
+{
+        struct pci_dev *PCI_Device = NULL;
+        struct mypriv *priv;
+        int count, found=0;
+        struct mtd_info *mtd;
+        u32 length = 0;
+
+	if(msize) {
+		msize = (1 << (ffs(msize) - 1))<<20;
+		if (msize > (1<<30)) {
+			printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", msize);
+			return -EINVAL;
+		}
+	}
+
+	if(asize) {
+		asize = (1 << (ffs(asize) - 1))<<20;
+		if (asize > (1<<30) ) {
+			printk(KERN_NOTICE "pmc551: Invalid aperture size [%d]\n", asize);
+			return -EINVAL;
+		}
+	}
+
+        printk(KERN_INFO PMC551_VERSION);
+
+        /*
+         * PCU-bus chipset probe.
+         */
+        for( count = 0; count < MAX_MTD_DEVICES; count++ ) {
+
+                if ((PCI_Device = pci_find_device(PCI_VENDOR_ID_V3_SEMI,
+                                                  PCI_DEVICE_ID_V3_SEMI_V370PDC,
+						  PCI_Device ) ) == NULL) {
+                        break;
+                }
+
+                printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%lX\n",
+				    PCI_Device->resource[0].start);
+
+                /*
+                 * The PMC551 device acts VERY weird if you don't init it
+                 * first.  i.e. it will not correctly report devsel.  If for
+                 * some reason the sdram is in a wrote-protected state the
+                 * device will DEVSEL when it is written to causing problems
+                 * with the oldproc.c driver in
+                 * some kernels (2.2.*)
+                 */
+                if((length = fixup_pmc551(PCI_Device)) <= 0) {
+                        printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
+                        break;
+                }
+
+		/*
+		 * This is needed until the driver is capable of reading the
+		 * onboard I2C SROM to discover the "real" memory size.
+		 */
+		if(msize) {
+			length = msize;
+			printk(KERN_NOTICE "pmc551: Using specified memory size 0x%x\n", length);
+		} else {
+			msize = length;
+		}
+
+                mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+                if (!mtd) {
+                        printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n");
+                        break;
+                }
+
+                memset(mtd, 0, sizeof(struct mtd_info));
+
+                priv = kmalloc (sizeof(struct mypriv), GFP_KERNEL);
+                if (!priv) {
+                        printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n");
+                        kfree(mtd);
+                        break;
+                }
+                memset(priv, 0, sizeof(*priv));
+                mtd->priv = priv;
+                priv->dev = PCI_Device;
+
+		if(asize > length) {
+			printk(KERN_NOTICE "pmc551: reducing aperture size to fit %dM\n",length>>20);
+			priv->asize = asize = length;
+		} else if (asize == 0 || asize == length) {
+			printk(KERN_NOTICE "pmc551: Using existing aperture size %dM\n", length>>20);
+			priv->asize = asize = length;
+		} else {
+			printk(KERN_NOTICE "pmc551: Using specified aperture size %dM\n", asize>>20);
+			priv->asize = asize;
+		}
+                priv->start = ioremap(((PCI_Device->resource[0].start)
+                                       & PCI_BASE_ADDRESS_MEM_MASK),
+                                      priv->asize);
+		
+		if (!priv->start) {
+			printk(KERN_NOTICE "pmc551: Unable to map IO space\n");
+                        kfree(mtd->priv);
+                        kfree(mtd);
+			break;
+		}
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+		printk( KERN_DEBUG "pmc551: setting aperture to %d\n",
+			ffs(priv->asize>>20)-1);
+#endif
+
+                priv->base_map0 = ( PMC551_PCI_MEM_MAP_REG_EN
+				  | PMC551_PCI_MEM_MAP_ENABLE
+				  | (ffs(priv->asize>>20)-1)<<4 );
+                priv->curr_map0 = priv->base_map0;
+                pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0,
+                                         priv->curr_map0 );
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+		printk( KERN_DEBUG "pmc551: aperture set to %d\n", 
+			(priv->base_map0 & 0xF0)>>4 );
+#endif
+
+                mtd->size 	= msize;
+                mtd->flags 	= MTD_CAP_RAM;
+                mtd->erase 	= pmc551_erase;
+                mtd->read 	= pmc551_read;
+                mtd->write 	= pmc551_write;
+                mtd->point 	= pmc551_point;
+                mtd->unpoint 	= pmc551_unpoint;
+                mtd->type 	= MTD_RAM;
+                mtd->name 	= "PMC551 RAM board";
+                mtd->erasesize 	= 0x10000;
+		mtd->owner = THIS_MODULE;
+
+                if (add_mtd_device(mtd)) {
+                        printk(KERN_NOTICE "pmc551: Failed to register new device\n");
+			iounmap(priv->start);
+                        kfree(mtd->priv);
+                        kfree(mtd);
+                        break;
+                }
+                printk(KERN_NOTICE "Registered pmc551 memory device.\n");
+                printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
+                       priv->asize>>20,
+                       priv->start,
+                       priv->start + priv->asize);
+                printk(KERN_NOTICE "Total memory is %d%c\n",
+	       		(length<1024)?length:
+				(length<1048576)?length>>10:length>>20,
+               		(length<1024)?'B':(length<1048576)?'K':'M');
+		priv->nextpmc551 = pmc551list;
+		pmc551list = mtd;
+		found++;
+        }
+
+        if( !pmc551list ) {
+                printk(KERN_NOTICE "pmc551: not detected\n");
+                return -ENODEV;
+        } else {
+		printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found);
+                return 0;
+	}
+}
+
+/*
+ * PMC551 Card Cleanup
+ */
+static void __exit cleanup_pmc551(void)
+{
+        int found=0;
+        struct mtd_info *mtd;
+	struct mypriv *priv;
+
+	while((mtd=pmc551list)) {
+		priv = mtd->priv;
+		pmc551list = priv->nextpmc551;
+		
+		if(priv->start) {
+			printk (KERN_DEBUG "pmc551: unmapping %dM starting at 0x%p\n",
+				priv->asize>>20, priv->start);
+			iounmap (priv->start);
+		}
+		
+		kfree (mtd->priv);
+		del_mtd_device (mtd);
+		kfree (mtd);
+		found++;
+	}
+
+	printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found);
+}
+
+module_init(init_pmc551);
+module_exit(cleanup_pmc551);
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
new file mode 100644
index 000000000000..5ab15e643be7
--- /dev/null
+++ b/drivers/mtd/devices/slram.c
@@ -0,0 +1,357 @@
+/*======================================================================
+
+  $Id: slram.c,v 1.33 2005/01/05 18:05:13 dwmw2 Exp $
+
+  This driver provides a method to access memory not used by the kernel
+  itself (i.e. if the kernel commandline mem=xxx is used). To actually
+  use slram at least mtdblock or mtdchar is required (for block or
+  character device access).
+
+  Usage:
+
+  if compiled as loadable module:
+    modprobe slram map=<name>,<start>,<end/offset>
+  if statically linked into the kernel use the following kernel cmd.line
+    slram=<name>,<start>,<end/offset>
+
+  <name>: name of the device that will be listed in /proc/mtd
+  <start>: start of the memory region, decimal or hex (0xabcdef)
+  <end/offset>: end of the memory region. It's possible to use +0x1234
+                to specify the offset instead of the absolute address
+    
+  NOTE:
+  With slram it's only possible to map a contigous memory region. Therfore
+  if there's a device mapped somewhere in the region specified slram will
+  fail to load (see kernel log if modprobe fails).
+
+  -
+  
+  Jochen Schaeuble <psionic@psionic.de>
+
+======================================================================*/
+
+
+#include <linux/module.h>
+#include <asm/uaccess.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <linux/mtd/mtd.h>
+
+#define SLRAM_MAX_DEVICES_PARAMS 6		/* 3 parameters / device */
+
+#define T(fmt, args...) printk(KERN_DEBUG fmt, ## args)
+#define E(fmt, args...) printk(KERN_NOTICE fmt, ## args)
+
+typedef struct slram_priv {
+	u_char *start;
+	u_char *end;
+} slram_priv_t;
+
+typedef struct slram_mtd_list {
+	struct mtd_info *mtdinfo;
+	struct slram_mtd_list *next;
+} slram_mtd_list_t;
+
+#ifdef MODULE
+static char *map[SLRAM_MAX_DEVICES_PARAMS];
+
+module_param_array(map, charp, NULL, 0);
+MODULE_PARM_DESC(map, "List of memory regions to map. \"map=<name>, <start>, <length / end>\"");
+#else
+static char *map;
+#endif
+
+static slram_mtd_list_t *slram_mtdlist = NULL;
+
+static int slram_erase(struct mtd_info *, struct erase_info *);
+static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, u_char **);
+static void slram_unpoint(struct mtd_info *, u_char *, loff_t,	size_t);
+static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+
+static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	slram_priv_t *priv = mtd->priv;
+
+	if (instr->addr + instr->len > mtd->size) {
+		return(-EINVAL);
+	}
+	
+	memset(priv->start + instr->addr, 0xff, instr->len);
+
+	/* This'll catch a few races. Free the thing before returning :) 
+	 * I don't feel at all ashamed. This kind of thing is possible anyway
+	 * with flash, but unlikely.
+	 */
+
+	instr->state = MTD_ERASE_DONE;
+
+	mtd_erase_callback(instr);
+
+	return(0);
+}
+
+static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char **mtdbuf)
+{
+	slram_priv_t *priv = mtd->priv;
+
+	*mtdbuf = priv->start + from;
+	*retlen = len;
+	return(0);
+}
+
+static void slram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+{
+}
+
+static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf)
+{
+	slram_priv_t *priv = mtd->priv;
+	
+	memcpy(buf, priv->start + from, len);
+
+	*retlen = len;
+	return(0);
+}
+
+static int slram_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
+{
+	slram_priv_t *priv = mtd->priv;
+
+	memcpy(priv->start + to, buf, len);
+
+	*retlen = len;
+	return(0);
+}
+
+/*====================================================================*/
+
+static int register_device(char *name, unsigned long start, unsigned long length)
+{
+	slram_mtd_list_t **curmtd;
+
+	curmtd = &slram_mtdlist;
+	while (*curmtd) {
+		curmtd = &(*curmtd)->next;
+	}
+
+	*curmtd = kmalloc(sizeof(slram_mtd_list_t), GFP_KERNEL);
+	if (!(*curmtd)) {
+		E("slram: Cannot allocate new MTD device.\n");
+		return(-ENOMEM);
+	}
+	(*curmtd)->mtdinfo = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+	(*curmtd)->next = NULL;
+	
+	if ((*curmtd)->mtdinfo)	{
+		memset((char *)(*curmtd)->mtdinfo, 0, sizeof(struct mtd_info));
+		(*curmtd)->mtdinfo->priv =
+			kmalloc(sizeof(slram_priv_t), GFP_KERNEL);
+		
+		if (!(*curmtd)->mtdinfo->priv) {
+			kfree((*curmtd)->mtdinfo);
+			(*curmtd)->mtdinfo = NULL;
+		} else {
+			memset((*curmtd)->mtdinfo->priv,0,sizeof(slram_priv_t));
+		}
+	}
+
+	if (!(*curmtd)->mtdinfo) {
+		E("slram: Cannot allocate new MTD device.\n");
+		return(-ENOMEM);
+	}
+	
+	if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start =
+				ioremap(start, length))) {
+		E("slram: ioremap failed\n");
+		return -EIO;
+	}
+	((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end =
+		((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start + length;
+
+
+	(*curmtd)->mtdinfo->name = name;
+	(*curmtd)->mtdinfo->size = length;
+	(*curmtd)->mtdinfo->flags = MTD_CLEAR_BITS | MTD_SET_BITS |
+					MTD_WRITEB_WRITEABLE | MTD_VOLATILE;
+        (*curmtd)->mtdinfo->erase = slram_erase;
+	(*curmtd)->mtdinfo->point = slram_point;
+	(*curmtd)->mtdinfo->unpoint = slram_unpoint;
+	(*curmtd)->mtdinfo->read = slram_read;
+	(*curmtd)->mtdinfo->write = slram_write;
+	(*curmtd)->mtdinfo->owner = THIS_MODULE;
+	(*curmtd)->mtdinfo->type = MTD_RAM;
+	(*curmtd)->mtdinfo->erasesize = 0x0;
+
+	if (add_mtd_device((*curmtd)->mtdinfo))	{
+		E("slram: Failed to register new device\n");
+		iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
+		kfree((*curmtd)->mtdinfo->priv);
+		kfree((*curmtd)->mtdinfo);
+		return(-EAGAIN);
+	}
+	T("slram: Registered device %s from %luKiB to %luKiB\n", name,
+			(start / 1024), ((start + length) / 1024));
+	T("slram: Mapped from 0x%p to 0x%p\n",
+			((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start,
+			((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end);
+	return(0);	
+}
+
+static void unregister_devices(void)
+{
+	slram_mtd_list_t *nextitem;
+
+	while (slram_mtdlist) {
+		nextitem = slram_mtdlist->next;
+		del_mtd_device(slram_mtdlist->mtdinfo);
+		iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
+		kfree(slram_mtdlist->mtdinfo->priv);
+		kfree(slram_mtdlist->mtdinfo);
+		kfree(slram_mtdlist);
+		slram_mtdlist = nextitem;
+	}
+}
+
+static unsigned long handle_unit(unsigned long value, char *unit)
+{
+	if ((*unit == 'M') || (*unit == 'm')) {
+		return(value * 1024 * 1024);
+	} else if ((*unit == 'K') || (*unit == 'k')) {
+		return(value * 1024);
+	}
+	return(value);
+}
+
+static int parse_cmdline(char *devname, char *szstart, char *szlength)
+{
+	char *buffer;
+	unsigned long devstart;
+	unsigned long devlength;
+	
+	if ((!devname) || (!szstart) || (!szlength)) {
+		unregister_devices();
+		return(-EINVAL);
+	}
+
+	devstart = simple_strtoul(szstart, &buffer, 0);
+	devstart = handle_unit(devstart, buffer);
+	
+	if (*(szlength) != '+') {
+		devlength = simple_strtoul(szlength, &buffer, 0);
+		devlength = handle_unit(devlength, buffer) - devstart;
+	} else {
+		devlength = simple_strtoul(szlength + 1, &buffer, 0);
+		devlength = handle_unit(devlength, buffer);
+	}
+	T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
+			devname, devstart, devlength);
+	if ((devstart < 0) || (devlength < 0)) {
+		E("slram: Illegal start / length parameter.\n");
+		return(-EINVAL);
+	}
+	
+	if ((devstart = register_device(devname, devstart, devlength))){
+		unregister_devices();
+		return((int)devstart);
+	}
+	return(0);
+}
+
+#ifndef MODULE
+
+static int __init mtd_slram_setup(char *str)
+{
+	map = str;
+	return(1);
+}
+
+__setup("slram=", mtd_slram_setup);
+
+#endif
+
+static int init_slram(void)
+{
+	char *devname;
+	int i;
+
+#ifndef MODULE
+	char *devstart;
+	char *devlength;
+
+	i = 0;
+
+	if (!map) {
+		E("slram: not enough parameters.\n");
+		return(-EINVAL);
+	}
+	while (map) {
+		devname = devstart = devlength = NULL;
+
+		if (!(devname = strsep(&map, ","))) {
+			E("slram: No devicename specified.\n");
+			break;
+		}
+		T("slram: devname = %s\n", devname);
+		if ((!map) || (!(devstart = strsep(&map, ",")))) {
+			E("slram: No devicestart specified.\n");
+		}
+		T("slram: devstart = %s\n", devstart);
+		if ((!map) || (!(devlength = strsep(&map, ",")))) {
+			E("slram: No devicelength / -end specified.\n");
+		}
+		T("slram: devlength = %s\n", devlength);
+		if (parse_cmdline(devname, devstart, devlength) != 0) {
+			return(-EINVAL);
+		}
+	}
+#else
+	int count;
+	
+	for (count = 0; (map[count]) && (count < SLRAM_MAX_DEVICES_PARAMS);
+			count++) {
+	}
+
+	if ((count % 3 != 0) || (count == 0)) {
+		E("slram: not enough parameters.\n");
+		return(-EINVAL);
+	}
+	for (i = 0; i < (count / 3); i++) {
+		devname = map[i * 3];
+
+		if (parse_cmdline(devname, map[i * 3 + 1], map[i * 3 + 2])!=0) {
+			return(-EINVAL);
+		}
+		
+	}
+#endif /* !MODULE */
+	
+	return(0);
+}
+
+static void __exit cleanup_slram(void)
+{
+	unregister_devices();
+}
+
+module_init(init_slram);
+module_exit(cleanup_slram);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jochen Schaeuble <psionic@psionic.de>");
+MODULE_DESCRIPTION("MTD driver for uncached system RAM");
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
new file mode 100644
index 000000000000..18cc8846e733
--- /dev/null
+++ b/drivers/mtd/ftl.c
@@ -0,0 +1,1115 @@
+/* This version ported to the Linux-MTD system by dwmw2@infradead.org
+ * $Id: ftl.c,v 1.54 2004/11/16 18:33:15 dwmw2 Exp $
+ *
+ * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
+ *
+ * Based on:
+ */
+/*======================================================================
+
+    A Flash Translation Layer memory card driver
+
+    This driver implements a disk-like block device driver with an
+    apparent block size of 512 bytes for flash memory cards.
+
+    ftl_cs.c 1.62 2000/02/01 00:59:04
+
+    The contents of this file are subject to the Mozilla Public
+    License Version 1.1 (the "License"); you may not use this file
+    except in compliance with the License. You may obtain a copy of
+    the License at http://www.mozilla.org/MPL/
+
+    Software distributed under the License is distributed on an "AS
+    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+    implied. See the License for the specific language governing
+    rights and limitations under the License.
+
+    The initial developer of the original code is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+
+    Alternatively, the contents of this file may be used under the
+    terms of the GNU General Public License version 2 (the "GPL"), in
+    which case the provisions of the GPL are applicable instead of the
+    above.  If you wish to allow the use of your version of this file
+    only under the terms of the GPL and not to allow others to use
+    your version of this file under the MPL, indicate your decision
+    by deleting the provisions above and replace them with the notice
+    and other provisions required by the GPL.  If you do not delete
+    the provisions above, a recipient may use your version of this
+    file under either the MPL or the GPL.
+
+    LEGAL NOTE: The FTL format is patented by M-Systems.  They have
+    granted a license for its use with PCMCIA devices:
+
+     "M-Systems grants a royalty-free, non-exclusive license under
+      any presently existing M-Systems intellectual property rights
+      necessary for the design and development of FTL-compatible
+      drivers, file systems and utilities using the data formats with
+      PCMCIA PC Cards as described in the PCMCIA Flash Translation
+      Layer (FTL) Specification."
+
+    Use of the FTL format for non-PCMCIA applications may be an
+    infringement of these patents.  For additional information,
+    contact M-Systems (http://www.m-sys.com) directly.
+      
+======================================================================*/
+#include <linux/mtd/blktrans.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+/*#define PSYCHO_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/hdreg.h>
+#include <linux/vmalloc.h>
+#include <linux/blkpg.h>
+#include <asm/uaccess.h>
+
+#include <linux/mtd/ftl.h>
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+static int shuffle_freq = 50;
+module_param(shuffle_freq, int, 0);
+
+/*====================================================================*/
+
+/* Major device # for FTL device */
+#ifndef FTL_MAJOR
+#define FTL_MAJOR	44
+#endif
+
+
+/*====================================================================*/
+
+/* Maximum number of separate memory devices we'll allow */
+#define MAX_DEV		4
+
+/* Maximum number of regions per device */
+#define MAX_REGION	4
+
+/* Maximum number of partitions in an FTL region */
+#define PART_BITS	4
+
+/* Maximum number of outstanding erase requests per socket */
+#define MAX_ERASE	8
+
+/* Sector size -- shouldn't need to change */
+#define SECTOR_SIZE	512
+
+
+/* Each memory region corresponds to a minor device */
+typedef struct partition_t {
+    struct mtd_blktrans_dev mbd;
+    u_int32_t		state;
+    u_int32_t		*VirtualBlockMap;
+    u_int32_t		*VirtualPageMap;
+    u_int32_t		FreeTotal;
+    struct eun_info_t {
+	u_int32_t		Offset;
+	u_int32_t		EraseCount;
+	u_int32_t		Free;
+	u_int32_t		Deleted;
+    } *EUNInfo;
+    struct xfer_info_t {
+	u_int32_t		Offset;
+	u_int32_t		EraseCount;
+	u_int16_t		state;
+    } *XferInfo;
+    u_int16_t		bam_index;
+    u_int32_t		*bam_cache;
+    u_int16_t		DataUnits;
+    u_int32_t		BlocksPerUnit;
+    erase_unit_header_t	header;
+#if 0
+    region_info_t	region;
+    memory_handle_t	handle;
+#endif
+} partition_t;
+
+void ftl_freepart(partition_t *part);
+
+/* Partition state flags */
+#define FTL_FORMATTED	0x01
+
+/* Transfer unit states */
+#define XFER_UNKNOWN	0x00
+#define XFER_ERASING	0x01
+#define XFER_ERASED	0x02
+#define XFER_PREPARED	0x03
+#define XFER_FAILED	0x04
+
+/*====================================================================*/
+
+
+static void ftl_erase_callback(struct erase_info *done);
+
+
+/*======================================================================
+
+    Scan_header() checks to see if a memory region contains an FTL
+    partition.  build_maps() reads all the erase unit headers, builds
+    the erase unit map, and then builds the virtual page map.
+    
+======================================================================*/
+
+static int scan_header(partition_t *part)
+{
+    erase_unit_header_t header;
+    loff_t offset, max_offset;
+    size_t ret;
+    int err;
+    part->header.FormattedSize = 0;
+    max_offset = (0x100000<part->mbd.mtd->size)?0x100000:part->mbd.mtd->size;
+    /* Search first megabyte for a valid FTL header */
+    for (offset = 0;
+	 (offset + sizeof(header)) < max_offset;
+	 offset += part->mbd.mtd->erasesize ? : 0x2000) {
+
+	err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret, 
+			      (unsigned char *)&header);
+	
+	if (err) 
+	    return err;
+
+	if (strcmp(header.DataOrgTuple+3, "FTL100") == 0) break;
+    }
+
+    if (offset == max_offset) {
+	printk(KERN_NOTICE "ftl_cs: FTL header not found.\n");
+	return -ENOENT;
+    }
+    if (header.BlockSize != 9 ||
+	(header.EraseUnitSize < 10) || (header.EraseUnitSize > 31) ||
+	(header.NumTransferUnits >= le16_to_cpu(header.NumEraseUnits))) {
+	printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n");
+	return -1;
+    }
+    if ((1 << header.EraseUnitSize) != part->mbd.mtd->erasesize) {
+	printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n",
+	       1 << header.EraseUnitSize,part->mbd.mtd->erasesize);
+	return -1;
+    }
+    part->header = header;
+    return 0;
+}
+
+static int build_maps(partition_t *part)
+{
+    erase_unit_header_t header;
+    u_int16_t xvalid, xtrans, i;
+    u_int blocks, j;
+    int hdr_ok, ret = -1;
+    ssize_t retval;
+    loff_t offset;
+
+    /* Set up erase unit maps */
+    part->DataUnits = le16_to_cpu(part->header.NumEraseUnits) -
+	part->header.NumTransferUnits;
+    part->EUNInfo = kmalloc(part->DataUnits * sizeof(struct eun_info_t),
+			    GFP_KERNEL);
+    if (!part->EUNInfo)
+	    goto out;
+    for (i = 0; i < part->DataUnits; i++)
+	part->EUNInfo[i].Offset = 0xffffffff;
+    part->XferInfo =
+	kmalloc(part->header.NumTransferUnits * sizeof(struct xfer_info_t),
+		GFP_KERNEL);
+    if (!part->XferInfo)
+	    goto out_EUNInfo;
+
+    xvalid = xtrans = 0;
+    for (i = 0; i < le16_to_cpu(part->header.NumEraseUnits); i++) {
+	offset = ((i + le16_to_cpu(part->header.FirstPhysicalEUN))
+		      << part->header.EraseUnitSize);
+	ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval, 
+			      (unsigned char *)&header);
+	
+	if (ret) 
+	    goto out_XferInfo;
+
+	ret = -1;
+	/* Is this a transfer partition? */
+	hdr_ok = (strcmp(header.DataOrgTuple+3, "FTL100") == 0);
+	if (hdr_ok && (le16_to_cpu(header.LogicalEUN) < part->DataUnits) &&
+	    (part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset == 0xffffffff)) {
+	    part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset = offset;
+	    part->EUNInfo[le16_to_cpu(header.LogicalEUN)].EraseCount =
+		le32_to_cpu(header.EraseCount);
+	    xvalid++;
+	} else {
+	    if (xtrans == part->header.NumTransferUnits) {
+		printk(KERN_NOTICE "ftl_cs: format error: too many "
+		       "transfer units!\n");
+		goto out_XferInfo;
+	    }
+	    if (hdr_ok && (le16_to_cpu(header.LogicalEUN) == 0xffff)) {
+		part->XferInfo[xtrans].state = XFER_PREPARED;
+		part->XferInfo[xtrans].EraseCount = le32_to_cpu(header.EraseCount);
+	    } else {
+		part->XferInfo[xtrans].state = XFER_UNKNOWN;
+		/* Pick anything reasonable for the erase count */
+		part->XferInfo[xtrans].EraseCount =
+		    le32_to_cpu(part->header.EraseCount);
+	    }
+	    part->XferInfo[xtrans].Offset = offset;
+	    xtrans++;
+	}
+    }
+    /* Check for format trouble */
+    header = part->header;
+    if ((xtrans != header.NumTransferUnits) ||
+	(xvalid+xtrans != le16_to_cpu(header.NumEraseUnits))) {
+	printk(KERN_NOTICE "ftl_cs: format error: erase units "
+	       "don't add up!\n");
+	goto out_XferInfo;
+    }
+    
+    /* Set up virtual page map */
+    blocks = le32_to_cpu(header.FormattedSize) >> header.BlockSize;
+    part->VirtualBlockMap = vmalloc(blocks * sizeof(u_int32_t));
+    if (!part->VirtualBlockMap)
+	    goto out_XferInfo;
+
+    memset(part->VirtualBlockMap, 0xff, blocks * sizeof(u_int32_t));
+    part->BlocksPerUnit = (1 << header.EraseUnitSize) >> header.BlockSize;
+
+    part->bam_cache = kmalloc(part->BlocksPerUnit * sizeof(u_int32_t),
+			      GFP_KERNEL);
+    if (!part->bam_cache)
+	    goto out_VirtualBlockMap;
+
+    part->bam_index = 0xffff;
+    part->FreeTotal = 0;
+
+    for (i = 0; i < part->DataUnits; i++) {
+	part->EUNInfo[i].Free = 0;
+	part->EUNInfo[i].Deleted = 0;
+	offset = part->EUNInfo[i].Offset + le32_to_cpu(header.BAMOffset);
+	
+	ret = part->mbd.mtd->read(part->mbd.mtd, offset,  
+			      part->BlocksPerUnit * sizeof(u_int32_t), &retval, 
+			      (unsigned char *)part->bam_cache);
+	
+	if (ret) 
+		goto out_bam_cache;
+
+	for (j = 0; j < part->BlocksPerUnit; j++) {
+	    if (BLOCK_FREE(le32_to_cpu(part->bam_cache[j]))) {
+		part->EUNInfo[i].Free++;
+		part->FreeTotal++;
+	    } else if ((BLOCK_TYPE(le32_to_cpu(part->bam_cache[j])) == BLOCK_DATA) &&
+		     (BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j])) < blocks))
+		part->VirtualBlockMap[BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j]))] =
+		    (i << header.EraseUnitSize) + (j << header.BlockSize);
+	    else if (BLOCK_DELETED(le32_to_cpu(part->bam_cache[j])))
+		part->EUNInfo[i].Deleted++;
+	}
+    }
+    
+    ret = 0;
+    goto out;
+
+out_bam_cache:
+    kfree(part->bam_cache);
+out_VirtualBlockMap:
+    vfree(part->VirtualBlockMap);
+out_XferInfo:
+    kfree(part->XferInfo);
+out_EUNInfo:
+    kfree(part->EUNInfo);
+out:
+    return ret;
+} /* build_maps */
+
+/*======================================================================
+
+    Erase_xfer() schedules an asynchronous erase operation for a
+    transfer unit.
+    
+======================================================================*/
+
+static int erase_xfer(partition_t *part,
+		      u_int16_t xfernum)
+{
+    int ret;
+    struct xfer_info_t *xfer;
+    struct erase_info *erase;
+
+    xfer = &part->XferInfo[xfernum];
+    DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
+    xfer->state = XFER_ERASING;
+
+    /* Is there a free erase slot? Always in MTD. */
+    
+    
+    erase=kmalloc(sizeof(struct erase_info), GFP_KERNEL);
+    if (!erase) 
+            return -ENOMEM;
+
+    erase->callback = ftl_erase_callback;
+    erase->addr = xfer->Offset;
+    erase->len = 1 << part->header.EraseUnitSize;
+    erase->priv = (u_long)part;
+    
+    ret = part->mbd.mtd->erase(part->mbd.mtd, erase);
+
+    if (!ret)
+	    xfer->EraseCount++;
+    else
+	    kfree(erase);
+
+    return ret;
+} /* erase_xfer */
+
+/*======================================================================
+
+    Prepare_xfer() takes a freshly erased transfer unit and gives
+    it an appropriate header.
+    
+======================================================================*/
+
+static void ftl_erase_callback(struct erase_info *erase)
+{
+    partition_t *part;
+    struct xfer_info_t *xfer;
+    int i;
+    
+    /* Look up the transfer unit */
+    part = (partition_t *)(erase->priv);
+
+    for (i = 0; i < part->header.NumTransferUnits; i++)
+	if (part->XferInfo[i].Offset == erase->addr) break;
+
+    if (i == part->header.NumTransferUnits) {
+	printk(KERN_NOTICE "ftl_cs: internal error: "
+	       "erase lookup failed!\n");
+	return;
+    }
+
+    xfer = &part->XferInfo[i];
+    if (erase->state == MTD_ERASE_DONE)
+	xfer->state = XFER_ERASED;
+    else {
+	xfer->state = XFER_FAILED;
+	printk(KERN_NOTICE "ftl_cs: erase failed: state = %d\n",
+	       erase->state);
+    }
+
+    kfree(erase);
+
+} /* ftl_erase_callback */
+
+static int prepare_xfer(partition_t *part, int i)
+{
+    erase_unit_header_t header;
+    struct xfer_info_t *xfer;
+    int nbam, ret;
+    u_int32_t ctl;
+    ssize_t retlen;
+    loff_t offset;
+
+    xfer = &part->XferInfo[i];
+    xfer->state = XFER_FAILED;
+    
+    DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
+
+    /* Write the transfer unit header */
+    header = part->header;
+    header.LogicalEUN = cpu_to_le16(0xffff);
+    header.EraseCount = cpu_to_le32(xfer->EraseCount);
+
+    ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset, sizeof(header),
+			   &retlen, (u_char *)&header);
+
+    if (ret) {
+	return ret;
+    }
+
+    /* Write the BAM stub */
+    nbam = (part->BlocksPerUnit * sizeof(u_int32_t) +
+	    le32_to_cpu(part->header.BAMOffset) + SECTOR_SIZE - 1) / SECTOR_SIZE;
+
+    offset = xfer->Offset + le32_to_cpu(part->header.BAMOffset);
+    ctl = cpu_to_le32(BLOCK_CONTROL);
+
+    for (i = 0; i < nbam; i++, offset += sizeof(u_int32_t)) {
+
+	ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), 
+			       &retlen, (u_char *)&ctl);
+
+	if (ret)
+	    return ret;
+    }
+    xfer->state = XFER_PREPARED;
+    return 0;
+    
+} /* prepare_xfer */
+
+/*======================================================================
+
+    Copy_erase_unit() takes a full erase block and a transfer unit,
+    copies everything to the transfer unit, then swaps the block
+    pointers.
+
+    All data blocks are copied to the corresponding blocks in the
+    target unit, so the virtual block map does not need to be
+    updated.
+    
+======================================================================*/
+
+static int copy_erase_unit(partition_t *part, u_int16_t srcunit,
+			   u_int16_t xferunit)
+{
+    u_char buf[SECTOR_SIZE];
+    struct eun_info_t *eun;
+    struct xfer_info_t *xfer;
+    u_int32_t src, dest, free, i;
+    u_int16_t unit;
+    int ret;
+    ssize_t retlen;
+    loff_t offset;
+    u_int16_t srcunitswap = cpu_to_le16(srcunit);
+
+    eun = &part->EUNInfo[srcunit];
+    xfer = &part->XferInfo[xferunit];
+    DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n",
+	  eun->Offset, xfer->Offset);
+	
+    
+    /* Read current BAM */
+    if (part->bam_index != srcunit) {
+
+	offset = eun->Offset + le32_to_cpu(part->header.BAMOffset);
+
+	ret = part->mbd.mtd->read(part->mbd.mtd, offset, 
+			      part->BlocksPerUnit * sizeof(u_int32_t),
+			      &retlen, (u_char *) (part->bam_cache));
+
+	/* mark the cache bad, in case we get an error later */
+	part->bam_index = 0xffff;
+
+	if (ret) {
+	    printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n");                
+	    return ret;
+	}
+    }
+    
+    /* Write the LogicalEUN for the transfer unit */
+    xfer->state = XFER_UNKNOWN;
+    offset = xfer->Offset + 20; /* Bad! */
+    unit = cpu_to_le16(0x7fff);
+
+    ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int16_t),
+			   &retlen, (u_char *) &unit);
+    
+    if (ret) {
+	printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n");
+	return ret;
+    }
+    
+    /* Copy all data blocks from source unit to transfer unit */
+    src = eun->Offset; dest = xfer->Offset;
+
+    free = 0;
+    ret = 0;
+    for (i = 0; i < part->BlocksPerUnit; i++) {
+	switch (BLOCK_TYPE(le32_to_cpu(part->bam_cache[i]))) {
+	case BLOCK_CONTROL:
+	    /* This gets updated later */
+	    break;
+	case BLOCK_DATA:
+	case BLOCK_REPLACEMENT:
+	    ret = part->mbd.mtd->read(part->mbd.mtd, src, SECTOR_SIZE,
+                        &retlen, (u_char *) buf);
+	    if (ret) {
+		printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n");
+		return ret;
+            }
+
+
+	    ret = part->mbd.mtd->write(part->mbd.mtd, dest, SECTOR_SIZE,
+                        &retlen, (u_char *) buf);
+	    if (ret)  {
+		printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n");
+		return ret;
+            }
+
+	    break;
+	default:
+	    /* All other blocks must be free */
+	    part->bam_cache[i] = cpu_to_le32(0xffffffff);
+	    free++;
+	    break;
+	}
+	src += SECTOR_SIZE;
+	dest += SECTOR_SIZE;
+    }
+
+    /* Write the BAM to the transfer unit */
+    ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset), 
+                    part->BlocksPerUnit * sizeof(int32_t), &retlen, 
+		    (u_char *)part->bam_cache);
+    if (ret) {
+	printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n");
+	return ret;
+    }
+
+    
+    /* All clear? Then update the LogicalEUN again */
+    ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + 20, sizeof(u_int16_t),
+			   &retlen, (u_char *)&srcunitswap);
+
+    if (ret) {
+	printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n");
+	return ret;
+    }    
+    
+    
+    /* Update the maps and usage stats*/
+    i = xfer->EraseCount;
+    xfer->EraseCount = eun->EraseCount;
+    eun->EraseCount = i;
+    i = xfer->Offset;
+    xfer->Offset = eun->Offset;
+    eun->Offset = i;
+    part->FreeTotal -= eun->Free;
+    part->FreeTotal += free;
+    eun->Free = free;
+    eun->Deleted = 0;
+    
+    /* Now, the cache should be valid for the new block */
+    part->bam_index = srcunit;
+    
+    return 0;
+} /* copy_erase_unit */
+
+/*======================================================================
+
+    reclaim_block() picks a full erase unit and a transfer unit and
+    then calls copy_erase_unit() to copy one to the other.  Then, it
+    schedules an erase on the expired block.
+
+    What's a good way to decide which transfer unit and which erase
+    unit to use?  Beats me.  My way is to always pick the transfer
+    unit with the fewest erases, and usually pick the data unit with
+    the most deleted blocks.  But with a small probability, pick the
+    oldest data unit instead.  This means that we generally postpone
+    the next reclaimation as long as possible, but shuffle static
+    stuff around a bit for wear leveling.
+    
+======================================================================*/
+
+static int reclaim_block(partition_t *part)
+{
+    u_int16_t i, eun, xfer;
+    u_int32_t best;
+    int queued, ret;
+
+    DEBUG(0, "ftl_cs: reclaiming space...\n");
+    DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits);
+    /* Pick the least erased transfer unit */
+    best = 0xffffffff; xfer = 0xffff;
+    do {
+	queued = 0;
+	for (i = 0; i < part->header.NumTransferUnits; i++) {
+	    int n=0;
+	    if (part->XferInfo[i].state == XFER_UNKNOWN) {
+		DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i);
+		n=1;
+		erase_xfer(part, i);
+	    }
+	    if (part->XferInfo[i].state == XFER_ERASING) {
+		DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i);
+		n=1;
+		queued = 1;
+	    }
+	    else if (part->XferInfo[i].state == XFER_ERASED) {
+		DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i);
+		n=1;
+		prepare_xfer(part, i);
+	    }
+	    if (part->XferInfo[i].state == XFER_PREPARED) {
+		DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i);
+		n=1;
+		if (part->XferInfo[i].EraseCount <= best) {
+		    best = part->XferInfo[i].EraseCount;
+		    xfer = i;
+		}
+	    }
+		if (!n)
+		    DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
+
+	}
+	if (xfer == 0xffff) {
+	    if (queued) {
+		DEBUG(1, "ftl_cs: waiting for transfer "
+		      "unit to be prepared...\n");
+		if (part->mbd.mtd->sync)
+			part->mbd.mtd->sync(part->mbd.mtd);
+	    } else {
+		static int ne = 0;
+		if (++ne < 5)
+		    printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
+			   "suitable transfer units!\n");
+		else
+		    DEBUG(1, "ftl_cs: reclaim failed: no "
+			  "suitable transfer units!\n");
+			
+		return -EIO;
+	    }
+	}
+    } while (xfer == 0xffff);
+
+    eun = 0;
+    if ((jiffies % shuffle_freq) == 0) {
+	DEBUG(1, "ftl_cs: recycling freshest block...\n");
+	best = 0xffffffff;
+	for (i = 0; i < part->DataUnits; i++)
+	    if (part->EUNInfo[i].EraseCount <= best) {
+		best = part->EUNInfo[i].EraseCount;
+		eun = i;
+	    }
+    } else {
+	best = 0;
+	for (i = 0; i < part->DataUnits; i++)
+	    if (part->EUNInfo[i].Deleted >= best) {
+		best = part->EUNInfo[i].Deleted;
+		eun = i;
+	    }
+	if (best == 0) {
+	    static int ne = 0;
+	    if (++ne < 5)
+		printk(KERN_NOTICE "ftl_cs: reclaim failed: "
+		       "no free blocks!\n");
+	    else
+		DEBUG(1,"ftl_cs: reclaim failed: "
+		       "no free blocks!\n");
+
+	    return -EIO;
+	}
+    }
+    ret = copy_erase_unit(part, eun, xfer);
+    if (!ret)
+	erase_xfer(part, xfer);
+    else
+	printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n");
+    return ret;
+} /* reclaim_block */
+
+/*======================================================================
+
+    Find_free() searches for a free block.  If necessary, it updates
+    the BAM cache for the erase unit containing the free block.  It
+    returns the block index -- the erase unit is just the currently
+    cached unit.  If there are no free blocks, it returns 0 -- this
+    is never a valid data block because it contains the header.
+    
+======================================================================*/
+
+#ifdef PSYCHO_DEBUG
+static void dump_lists(partition_t *part)
+{
+    int i;
+    printk(KERN_DEBUG "ftl_cs: Free total = %d\n", part->FreeTotal);
+    for (i = 0; i < part->DataUnits; i++)
+	printk(KERN_DEBUG "ftl_cs:   unit %d: %d phys, %d free, "
+	       "%d deleted\n", i,
+	       part->EUNInfo[i].Offset >> part->header.EraseUnitSize,
+	       part->EUNInfo[i].Free, part->EUNInfo[i].Deleted);
+}
+#endif
+
+static u_int32_t find_free(partition_t *part)
+{
+    u_int16_t stop, eun;
+    u_int32_t blk;
+    size_t retlen;
+    int ret;
+    
+    /* Find an erase unit with some free space */
+    stop = (part->bam_index == 0xffff) ? 0 : part->bam_index;
+    eun = stop;
+    do {
+	if (part->EUNInfo[eun].Free != 0) break;
+	/* Wrap around at end of table */
+	if (++eun == part->DataUnits) eun = 0;
+    } while (eun != stop);
+
+    if (part->EUNInfo[eun].Free == 0)
+	return 0;
+    
+    /* Is this unit's BAM cached? */
+    if (eun != part->bam_index) {
+	/* Invalidate cache */
+	part->bam_index = 0xffff;
+
+	ret = part->mbd.mtd->read(part->mbd.mtd, 
+		       part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset),
+		       part->BlocksPerUnit * sizeof(u_int32_t),
+		       &retlen, (u_char *) (part->bam_cache));
+	
+	if (ret) {
+	    printk(KERN_WARNING"ftl: Error reading BAM in find_free\n");
+	    return 0;
+	}
+	part->bam_index = eun;
+    }
+
+    /* Find a free block */
+    for (blk = 0; blk < part->BlocksPerUnit; blk++)
+	if (BLOCK_FREE(le32_to_cpu(part->bam_cache[blk]))) break;
+    if (blk == part->BlocksPerUnit) {
+#ifdef PSYCHO_DEBUG
+	static int ne = 0;
+	if (++ne == 1)
+	    dump_lists(part);
+#endif
+	printk(KERN_NOTICE "ftl_cs: bad free list!\n");
+	return 0;
+    }
+    DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun);
+    return blk;
+    
+} /* find_free */
+
+
+/*======================================================================
+
+    Read a series of sectors from an FTL partition.
+    
+======================================================================*/
+
+static int ftl_read(partition_t *part, caddr_t buffer,
+		    u_long sector, u_long nblocks)
+{
+    u_int32_t log_addr, bsize;
+    u_long i;
+    int ret;
+    size_t offset, retlen;
+    
+    DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
+	  part, sector, nblocks);
+    if (!(part->state & FTL_FORMATTED)) {
+	printk(KERN_NOTICE "ftl_cs: bad partition\n");
+	return -EIO;
+    }
+    bsize = 1 << part->header.EraseUnitSize;
+
+    for (i = 0; i < nblocks; i++) {
+	if (((sector+i) * SECTOR_SIZE) >= le32_to_cpu(part->header.FormattedSize)) {
+	    printk(KERN_NOTICE "ftl_cs: bad read offset\n");
+	    return -EIO;
+	}
+	log_addr = part->VirtualBlockMap[sector+i];
+	if (log_addr == 0xffffffff)
+	    memset(buffer, 0, SECTOR_SIZE);
+	else {
+	    offset = (part->EUNInfo[log_addr / bsize].Offset
+			  + (log_addr % bsize));
+	    ret = part->mbd.mtd->read(part->mbd.mtd, offset, SECTOR_SIZE,
+			   &retlen, (u_char *) buffer);
+
+	    if (ret) {
+		printk(KERN_WARNING "Error reading MTD device in ftl_read()\n");
+		return ret;
+	    }
+	}
+	buffer += SECTOR_SIZE;
+    }
+    return 0;
+} /* ftl_read */
+
+/*======================================================================
+
+    Write a series of sectors to an FTL partition
+    
+======================================================================*/
+
+static int set_bam_entry(partition_t *part, u_int32_t log_addr,
+			 u_int32_t virt_addr)
+{
+    u_int32_t bsize, blk, le_virt_addr;
+#ifdef PSYCHO_DEBUG
+    u_int32_t old_addr;
+#endif
+    u_int16_t eun;
+    int ret;
+    size_t retlen, offset;
+
+    DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
+	  part, log_addr, virt_addr);
+    bsize = 1 << part->header.EraseUnitSize;
+    eun = log_addr / bsize;
+    blk = (log_addr % bsize) / SECTOR_SIZE;
+    offset = (part->EUNInfo[eun].Offset + blk * sizeof(u_int32_t) +
+		  le32_to_cpu(part->header.BAMOffset));
+    
+#ifdef PSYCHO_DEBUG
+    ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(u_int32_t),
+                        &retlen, (u_char *)&old_addr);
+    if (ret) {
+	printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret);
+	return ret;
+    }
+    old_addr = le32_to_cpu(old_addr);
+
+    if (((virt_addr == 0xfffffffe) && !BLOCK_FREE(old_addr)) ||
+	((virt_addr == 0) && (BLOCK_TYPE(old_addr) != BLOCK_DATA)) ||
+	(!BLOCK_DELETED(virt_addr) && (old_addr != 0xfffffffe))) {
+	static int ne = 0;
+	if (++ne < 5) {
+	    printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n");
+	    printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, old = 0x%x"
+		   ", new = 0x%x\n", log_addr, old_addr, virt_addr);
+	}
+	return -EIO;
+    }
+#endif
+    le_virt_addr = cpu_to_le32(virt_addr);
+    if (part->bam_index == eun) {
+#ifdef PSYCHO_DEBUG
+	if (le32_to_cpu(part->bam_cache[blk]) != old_addr) {
+	    static int ne = 0;
+	    if (++ne < 5) {
+		printk(KERN_NOTICE "ftl_cs: set_bam_entry() "
+		       "inconsistency!\n");
+		printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, cache"
+		       " = 0x%x\n",
+		       le32_to_cpu(part->bam_cache[blk]), old_addr);
+	    }
+	    return -EIO;
+	}
+#endif
+	part->bam_cache[blk] = le_virt_addr;
+    }
+    ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t),
+                            &retlen, (u_char *)&le_virt_addr);
+
+    if (ret) {
+	printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n");
+	printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, new = 0x%x\n",
+	       log_addr, virt_addr);
+    }
+    return ret;
+} /* set_bam_entry */
+
+static int ftl_write(partition_t *part, caddr_t buffer,
+		     u_long sector, u_long nblocks)
+{
+    u_int32_t bsize, log_addr, virt_addr, old_addr, blk;
+    u_long i;
+    int ret;
+    size_t retlen, offset;
+
+    DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
+	  part, sector, nblocks);
+    if (!(part->state & FTL_FORMATTED)) {
+	printk(KERN_NOTICE "ftl_cs: bad partition\n");
+	return -EIO;
+    }
+    /* See if we need to reclaim space, before we start */
+    while (part->FreeTotal < nblocks) {
+	ret = reclaim_block(part);
+	if (ret)
+	    return ret;
+    }
+    
+    bsize = 1 << part->header.EraseUnitSize;
+
+    virt_addr = sector * SECTOR_SIZE | BLOCK_DATA;
+    for (i = 0; i < nblocks; i++) {
+	if (virt_addr >= le32_to_cpu(part->header.FormattedSize)) {
+	    printk(KERN_NOTICE "ftl_cs: bad write offset\n");
+	    return -EIO;
+	}
+
+	/* Grab a free block */
+	blk = find_free(part);
+	if (blk == 0) {
+	    static int ne = 0;
+	    if (++ne < 5)
+		printk(KERN_NOTICE "ftl_cs: internal error: "
+		       "no free blocks!\n");
+	    return -ENOSPC;
+	}
+
+	/* Tag the BAM entry, and write the new block */
+	log_addr = part->bam_index * bsize + blk * SECTOR_SIZE;
+	part->EUNInfo[part->bam_index].Free--;
+	part->FreeTotal--;
+	if (set_bam_entry(part, log_addr, 0xfffffffe)) 
+	    return -EIO;
+	part->EUNInfo[part->bam_index].Deleted++;
+	offset = (part->EUNInfo[part->bam_index].Offset +
+		      blk * SECTOR_SIZE);
+	ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen, 
+                                     buffer);
+
+	if (ret) {
+	    printk(KERN_NOTICE "ftl_cs: block write failed!\n");
+	    printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, virt_addr"
+		   " = 0x%x, Offset = 0x%zx\n", log_addr, virt_addr,
+		   offset);
+	    return -EIO;
+	}
+	
+	/* Only delete the old entry when the new entry is ready */
+	old_addr = part->VirtualBlockMap[sector+i];
+	if (old_addr != 0xffffffff) {
+	    part->VirtualBlockMap[sector+i] = 0xffffffff;
+	    part->EUNInfo[old_addr/bsize].Deleted++;
+	    if (set_bam_entry(part, old_addr, 0))
+		return -EIO;
+	}
+
+	/* Finally, set up the new pointers */
+	if (set_bam_entry(part, log_addr, virt_addr))
+	    return -EIO;
+	part->VirtualBlockMap[sector+i] = log_addr;
+	part->EUNInfo[part->bam_index].Deleted--;
+	
+	buffer += SECTOR_SIZE;
+	virt_addr += SECTOR_SIZE;
+    }
+    return 0;
+} /* ftl_write */
+
+static int ftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo)
+{
+	partition_t *part = (void *)dev;
+	u_long sect;
+
+	/* Sort of arbitrary: round size down to 4KiB boundary */
+	sect = le32_to_cpu(part->header.FormattedSize)/SECTOR_SIZE;
+
+	geo->heads = 1;
+	geo->sectors = 8;
+	geo->cylinders = sect >> 3;
+
+	return 0;
+}
+
+static int ftl_readsect(struct mtd_blktrans_dev *dev,
+			      unsigned long block, char *buf)
+{
+	return ftl_read((void *)dev, buf, block, 1);
+}
+
+static int ftl_writesect(struct mtd_blktrans_dev *dev,
+			      unsigned long block, char *buf)
+{
+	return ftl_write((void *)dev, buf, block, 1);
+}
+
+/*====================================================================*/
+
+void ftl_freepart(partition_t *part)
+{
+    if (part->VirtualBlockMap) {
+	vfree(part->VirtualBlockMap);
+	part->VirtualBlockMap = NULL;
+    }
+    if (part->VirtualPageMap) {
+	kfree(part->VirtualPageMap);
+	part->VirtualPageMap = NULL;
+    }
+    if (part->EUNInfo) {
+	kfree(part->EUNInfo);
+	part->EUNInfo = NULL;
+    }
+    if (part->XferInfo) {
+	kfree(part->XferInfo);
+	part->XferInfo = NULL;
+    }
+    if (part->bam_cache) {
+	kfree(part->bam_cache);
+	part->bam_cache = NULL;
+    }
+    
+} /* ftl_freepart */
+
+static void ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
+{
+	partition_t *partition;
+
+	partition = kmalloc(sizeof(partition_t), GFP_KERNEL);
+		
+	if (!partition) {
+		printk(KERN_WARNING "No memory to scan for FTL on %s\n",
+		       mtd->name);
+		return;
+	}    
+
+	memset(partition, 0, sizeof(partition_t));
+
+	partition->mbd.mtd = mtd;
+
+	if ((scan_header(partition) == 0) && 
+	    (build_maps(partition) == 0)) {
+		
+		partition->state = FTL_FORMATTED;
+#ifdef PCMCIA_DEBUG
+		printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n",
+		       le32_to_cpu(partition->header.FormattedSize) >> 10);
+#endif
+		partition->mbd.size = le32_to_cpu(partition->header.FormattedSize) >> 9;
+		partition->mbd.blksize = SECTOR_SIZE;
+		partition->mbd.tr = tr;
+		partition->mbd.devnum = -1;
+		if (!add_mtd_blktrans_dev((void *)partition))
+			return;
+	}
+
+	ftl_freepart(partition);
+	kfree(partition);
+}
+
+static void ftl_remove_dev(struct mtd_blktrans_dev *dev)
+{
+	del_mtd_blktrans_dev(dev);
+	ftl_freepart((partition_t *)dev);
+	kfree(dev);
+}
+
+struct mtd_blktrans_ops ftl_tr = {
+	.name		= "ftl",
+	.major		= FTL_MAJOR,
+	.part_bits	= PART_BITS,
+	.readsect	= ftl_readsect,
+	.writesect	= ftl_writesect,
+	.getgeo		= ftl_getgeo,
+	.add_mtd	= ftl_add_mtd,
+	.remove_dev	= ftl_remove_dev,
+	.owner		= THIS_MODULE,
+};
+
+int init_ftl(void)
+{
+	DEBUG(0, "$Id: ftl.c,v 1.54 2004/11/16 18:33:15 dwmw2 Exp $\n");
+
+	return register_mtd_blktrans(&ftl_tr);
+}
+
+static void __exit cleanup_ftl(void)
+{
+	deregister_mtd_blktrans(&ftl_tr);
+}
+
+module_init(init_ftl);
+module_exit(cleanup_ftl);
+
+
+MODULE_LICENSE("Dual MPL/GPL");
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("Support code for Flash Translation Layer, used on PCMCIA devices");
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
new file mode 100644
index 000000000000..39eb53f6551f
--- /dev/null
+++ b/drivers/mtd/inftlcore.c
@@ -0,0 +1,912 @@
+/* 
+ * inftlcore.c -- Linux driver for Inverse Flash Translation Layer (INFTL)
+ *
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * Based heavily on the nftlcore.c code which is:
+ * (c) 1999 Machine Vision Holdings, Inc.
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ *
+ * $Id: inftlcore.c,v 1.18 2004/11/16 18:28:59 dwmw2 Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/hdreg.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nftl.h>
+#include <linux/mtd/inftl.h>
+#include <asm/uaccess.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+/*
+ * Maximum number of loops while examining next block, to have a
+ * chance to detect consistency problems (they should never happen
+ * because of the checks done in the mounting.
+ */
+#define MAX_LOOPS 10000
+
+extern void INFTL_dumptables(struct INFTLrecord *inftl);
+extern void INFTL_dumpVUchains(struct INFTLrecord *inftl);
+
+static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
+{
+	struct INFTLrecord *inftl;
+	unsigned long temp;
+
+	if (mtd->type != MTD_NANDFLASH)
+		return;
+	/* OK, this is moderately ugly.  But probably safe.  Alternatives? */
+	if (memcmp(mtd->name, "DiskOnChip", 10))
+		return;
+
+	if (!mtd->block_isbad) {
+		printk(KERN_ERR
+"INFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n"
+"Please use the new diskonchip driver under the NAND subsystem.\n");
+		return;
+	}
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: add_mtd for %s\n", mtd->name);
+
+	inftl = kmalloc(sizeof(*inftl), GFP_KERNEL);
+
+	if (!inftl) {
+		printk(KERN_WARNING "INFTL: Out of memory for data structures\n");
+		return;
+	}
+	memset(inftl, 0, sizeof(*inftl));
+
+	inftl->mbd.mtd = mtd;
+	inftl->mbd.devnum = -1;
+	inftl->mbd.blksize = 512;
+	inftl->mbd.tr = tr;
+	memcpy(&inftl->oobinfo, &mtd->oobinfo, sizeof(struct nand_oobinfo));
+	inftl->oobinfo.useecc = MTD_NANDECC_PLACEONLY;
+
+        if (INFTL_mount(inftl) < 0) {
+		printk(KERN_WARNING "INFTL: could not mount device\n");
+		kfree(inftl);
+		return;
+        }
+
+	/* OK, it's a new one. Set up all the data structures. */
+
+	/* Calculate geometry */
+	inftl->cylinders = 1024;
+	inftl->heads = 16;
+
+	temp = inftl->cylinders * inftl->heads;
+	inftl->sectors = inftl->mbd.size / temp;
+	if (inftl->mbd.size % temp) {
+		inftl->sectors++;
+		temp = inftl->cylinders * inftl->sectors;
+		inftl->heads = inftl->mbd.size / temp;
+
+		if (inftl->mbd.size % temp) {
+			inftl->heads++;
+			temp = inftl->heads * inftl->sectors;
+			inftl->cylinders = inftl->mbd.size / temp;
+		}
+	}
+
+	if (inftl->mbd.size != inftl->heads * inftl->cylinders * inftl->sectors) {
+		/*
+		  Oh no we don't have 
+		   mbd.size == heads * cylinders * sectors
+		*/
+		printk(KERN_WARNING "INFTL: cannot calculate a geometry to "
+		       "match size of 0x%lx.\n", inftl->mbd.size);
+		printk(KERN_WARNING "INFTL: using C:%d H:%d S:%d "
+			"(== 0x%lx sects)\n",
+			inftl->cylinders, inftl->heads , inftl->sectors, 
+			(long)inftl->cylinders * (long)inftl->heads *
+			(long)inftl->sectors );
+	}
+
+	if (add_mtd_blktrans_dev(&inftl->mbd)) {
+		if (inftl->PUtable)
+			kfree(inftl->PUtable);
+		if (inftl->VUtable)
+			kfree(inftl->VUtable);
+		kfree(inftl);
+		return;
+	}
+#ifdef PSYCHO_DEBUG
+	printk(KERN_INFO "INFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a');
+#endif
+	return;
+}
+
+static void inftl_remove_dev(struct mtd_blktrans_dev *dev)
+{
+	struct INFTLrecord *inftl = (void *)dev;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: remove_dev (i=%d)\n", dev->devnum);
+
+	del_mtd_blktrans_dev(dev);
+
+	if (inftl->PUtable)
+		kfree(inftl->PUtable);
+	if (inftl->VUtable)
+		kfree(inftl->VUtable);
+	kfree(inftl);
+}
+
+/*
+ * Actual INFTL access routines.
+ */
+
+/*
+ * INFTL_findfreeblock: Find a free Erase Unit on the INFTL partition.
+ *	This function is used when the give Virtual Unit Chain.
+ */
+static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate)
+{
+	u16 pot = inftl->LastFreeEUN;
+	int silly = inftl->nb_blocks;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findfreeblock(inftl=%p,"
+		"desperate=%d)\n", inftl, desperate);
+
+	/*
+	 * Normally, we force a fold to happen before we run out of free
+	 * blocks completely.
+	 */
+	if (!desperate && inftl->numfreeEUNs < 2) {
+		DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
+			"EUNs (%d)\n", inftl->numfreeEUNs);
+		return 0xffff;
+	}
+
+	/* Scan for a free block */
+	do {
+		if (inftl->PUtable[pot] == BLOCK_FREE) {
+			inftl->LastFreeEUN = pot;
+			return pot;
+		}
+
+		if (++pot > inftl->lastEUN)
+			pot = 0;
+
+		if (!silly--) {
+			printk(KERN_WARNING "INFTL: no free blocks found!  "
+				"EUN range = %d - %d\n", 0, inftl->LastFreeEUN);
+			return BLOCK_NIL;
+		}
+	} while (pot != inftl->LastFreeEUN);
+
+	return BLOCK_NIL;
+}
+
+static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned pendingblock)
+{
+	u16 BlockMap[MAX_SECTORS_PER_UNIT];
+	unsigned char BlockDeleted[MAX_SECTORS_PER_UNIT];
+	unsigned int thisEUN, prevEUN, status;
+	int block, silly;
+	unsigned int targetEUN;
+	struct inftl_oob oob;
+        size_t retlen;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,"
+		"pending=%d)\n", inftl, thisVUC, pendingblock);
+
+	memset(BlockMap, 0xff, sizeof(BlockMap));
+	memset(BlockDeleted, 0, sizeof(BlockDeleted));
+
+	thisEUN = targetEUN = inftl->VUtable[thisVUC];
+
+	if (thisEUN == BLOCK_NIL) {
+		printk(KERN_WARNING "INFTL: trying to fold non-existent "
+		       "Virtual Unit Chain %d!\n", thisVUC);
+		return BLOCK_NIL;
+	}
+	
+	/*
+	 * Scan to find the Erase Unit which holds the actual data for each
+	 * 512-byte block within the Chain.
+	 */
+        silly = MAX_LOOPS;
+	while (thisEUN < inftl->nb_blocks) {
+		for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) {
+			if ((BlockMap[block] != 0xffff) || BlockDeleted[block])
+				continue;
+
+			if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize)
+			     + (block * SECTORSIZE), 16 , &retlen,
+			     (char *)&oob) < 0)
+				status = SECTOR_IGNORE;
+			else
+                        	status = oob.b.Status | oob.b.Status1;
+
+			switch(status) {
+			case SECTOR_FREE:
+			case SECTOR_IGNORE:
+				break;
+			case SECTOR_USED:
+				BlockMap[block] = thisEUN;
+				continue;
+			case SECTOR_DELETED:
+				BlockDeleted[block] = 1;
+				continue;
+			default:
+				printk(KERN_WARNING "INFTL: unknown status "
+					"for block %d in EUN %d: %x\n",
+					block, thisEUN, status);
+				break;
+			}
+		}
+
+		if (!silly--) {
+			printk(KERN_WARNING "INFTL: infinite loop in Virtual "
+				"Unit Chain 0x%x\n", thisVUC);
+			return BLOCK_NIL;
+		}
+		
+		thisEUN = inftl->PUtable[thisEUN];
+	}
+
+	/*
+	 * OK. We now know the location of every block in the Virtual Unit
+	 * Chain, and the Erase Unit into which we are supposed to be copying.
+	 * Go for it.
+	 */
+	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: folding chain %d into unit %d\n",
+		thisVUC, targetEUN);
+
+	for (block = 0; block < inftl->EraseSize/SECTORSIZE ; block++) {
+		unsigned char movebuf[SECTORSIZE];
+		int ret;
+
+		/*
+		 * If it's in the target EUN already, or if it's pending write,
+		 * do nothing.
+		 */
+		if (BlockMap[block] == targetEUN || (pendingblock ==
+		    (thisVUC * (inftl->EraseSize / SECTORSIZE) + block))) {
+			continue;
+		}
+
+                /*
+		 * Copy only in non free block (free blocks can only
+                 * happen in case of media errors or deleted blocks).
+		 */
+                if (BlockMap[block] == BLOCK_NIL)
+                        continue;
+                
+                ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize *
+			BlockMap[block]) + (block * SECTORSIZE), SECTORSIZE,
+			&retlen, movebuf); 
+                if (ret < 0) {
+			ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize *
+				BlockMap[block]) + (block * SECTORSIZE),
+				SECTORSIZE, &retlen, movebuf);
+			if (ret != -EIO) 
+                        	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
+					"away on retry?\n");
+                }
+                memset(&oob, 0xff, sizeof(struct inftl_oob));
+                oob.b.Status = oob.b.Status1 = SECTOR_USED;
+                MTD_WRITEECC(inftl->mbd.mtd, (inftl->EraseSize * targetEUN) +
+			(block * SECTORSIZE), SECTORSIZE, &retlen,
+			movebuf, (char *)&oob, &inftl->oobinfo);
+	}
+
+	/*
+	 * Newest unit in chain now contains data from _all_ older units.
+	 * So go through and erase each unit in chain, oldest first. (This
+	 * is important, by doing oldest first if we crash/reboot then it
+	 * it is relatively simple to clean up the mess).
+	 */
+	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: want to erase virtual chain %d\n",
+		thisVUC);
+
+	for (;;) {
+		/* Find oldest unit in chain. */
+		thisEUN = inftl->VUtable[thisVUC];
+		prevEUN = BLOCK_NIL;
+		while (inftl->PUtable[thisEUN] != BLOCK_NIL) {
+			prevEUN = thisEUN;
+			thisEUN = inftl->PUtable[thisEUN];
+		}
+
+		/* Check if we are all done */
+		if (thisEUN == targetEUN)
+			break;
+
+                if (INFTL_formatblock(inftl, thisEUN) < 0) {
+			/*
+			 * Could not erase : mark block as reserved.
+			 */
+			inftl->PUtable[thisEUN] = BLOCK_RESERVED;
+                } else {
+			/* Correctly erased : mark it as free */
+			inftl->PUtable[thisEUN] = BLOCK_FREE;
+			inftl->PUtable[prevEUN] = BLOCK_NIL;
+			inftl->numfreeEUNs++;
+                }
+	}
+
+	return targetEUN;
+}
+
+static u16 INFTL_makefreeblock(struct INFTLrecord *inftl, unsigned pendingblock)
+{
+	/*
+	 * This is the part that needs some cleverness applied. 
+	 * For now, I'm doing the minimum applicable to actually
+	 * get the thing to work.
+	 * Wear-levelling and other clever stuff needs to be implemented
+	 * and we also need to do some assessment of the results when
+	 * the system loses power half-way through the routine.
+	 */
+	u16 LongestChain = 0;
+	u16 ChainLength = 0, thislen;
+	u16 chain, EUN;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_makefreeblock(inftl=%p,"
+		"pending=%d)\n", inftl, pendingblock);
+
+	for (chain = 0; chain < inftl->nb_blocks; chain++) {
+		EUN = inftl->VUtable[chain];
+		thislen = 0;
+
+		while (EUN <= inftl->lastEUN) {
+			thislen++;
+			EUN = inftl->PUtable[EUN];
+			if (thislen > 0xff00) {
+				printk(KERN_WARNING "INFTL: endless loop in "
+					"Virtual Chain %d: Unit %x\n",
+					chain, EUN);
+				/*
+				 * Actually, don't return failure.
+				 * Just ignore this chain and get on with it.
+				 */
+				thislen = 0;
+				break;
+			}
+		}
+
+		if (thislen > ChainLength) {
+			ChainLength = thislen;
+			LongestChain = chain;
+		}
+	}
+
+	if (ChainLength < 2) {
+		printk(KERN_WARNING "INFTL: no Virtual Unit Chains available "
+			"for folding. Failing request\n");
+		return BLOCK_NIL;
+	}
+
+	return INFTL_foldchain(inftl, LongestChain, pendingblock);
+}
+
+static int nrbits(unsigned int val, int bitcount)
+{
+	int i, total = 0;
+
+	for (i = 0; (i < bitcount); i++)
+		total += (((0x1 << i) & val) ? 1 : 0);
+	return total;
+}
+
+/*
+ * INFTL_findwriteunit: Return the unit number into which we can write 
+ *                      for this block. Make it available if it isn't already.
+ */
+static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
+{
+	unsigned int thisVUC = block / (inftl->EraseSize / SECTORSIZE);
+	unsigned int thisEUN, writeEUN, prev_block, status;
+	unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize -1);
+	struct inftl_oob oob;
+	struct inftl_bci bci;
+	unsigned char anac, nacs, parity;
+	size_t retlen;
+	int silly, silly2 = 3;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findwriteunit(inftl=%p,"
+		"block=%d)\n", inftl, block);
+
+	do {
+		/*
+		 * Scan the media to find a unit in the VUC which has
+		 * a free space for the block in question.
+		 */
+		writeEUN = BLOCK_NIL;
+		thisEUN = inftl->VUtable[thisVUC];
+		silly = MAX_LOOPS;
+
+		while (thisEUN <= inftl->lastEUN) {
+			MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) +
+				blockofs, 8, &retlen, (char *)&bci);
+
+                        status = bci.Status | bci.Status1;
+			DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in "
+				"EUN %d is %x\n", block , writeEUN, status);
+
+			switch(status) {
+			case SECTOR_FREE:
+				writeEUN = thisEUN;
+				break;
+			case SECTOR_DELETED:
+			case SECTOR_USED:
+				/* Can't go any further */
+				goto hitused;
+			case SECTOR_IGNORE:
+				break;
+			default:
+				/*
+				 * Invalid block. Don't use it any more.
+				 * Must implement.
+				 */
+				break;			
+			}
+			
+			if (!silly--) { 
+				printk(KERN_WARNING "INFTL: infinite loop in "
+					"Virtual Unit Chain 0x%x\n", thisVUC);
+				return 0xffff;
+			}
+
+			/* Skip to next block in chain */
+			thisEUN = inftl->PUtable[thisEUN];
+		}
+
+hitused:
+		if (writeEUN != BLOCK_NIL)
+			return writeEUN;
+
+
+		/*
+		 * OK. We didn't find one in the existing chain, or there 
+		 * is no existing chain. Allocate a new one.
+		 */
+		writeEUN = INFTL_findfreeblock(inftl, 0);
+
+		if (writeEUN == BLOCK_NIL) {
+			/*
+			 * That didn't work - there were no free blocks just
+			 * waiting to be picked up. We're going to have to fold
+			 * a chain to make room.
+			 */
+			thisEUN = INFTL_makefreeblock(inftl, 0xffff);
+
+			/*
+			 * Hopefully we free something, lets try again.
+			 * This time we are desperate...
+			 */
+			DEBUG(MTD_DEBUG_LEVEL1, "INFTL: using desperate==1 "
+				"to find free EUN to accommodate write to "
+				"VUC %d\n", thisVUC);
+			writeEUN = INFTL_findfreeblock(inftl, 1);
+			if (writeEUN == BLOCK_NIL) {
+				/*
+				 * Ouch. This should never happen - we should
+				 * always be able to make some room somehow. 
+				 * If we get here, we've allocated more storage 
+				 * space than actual media, or our makefreeblock
+				 * routine is missing something.
+				 */
+				printk(KERN_WARNING "INFTL: cannot make free "
+					"space.\n");
+#ifdef DEBUG
+				INFTL_dumptables(inftl);
+				INFTL_dumpVUchains(inftl);
+#endif
+				return BLOCK_NIL;
+			}			
+		}
+
+		/*
+		 * Insert new block into virtual chain. Firstly update the
+		 * block headers in flash...
+		 */
+		anac = 0;
+		nacs = 0;
+		thisEUN = inftl->VUtable[thisVUC];
+		if (thisEUN != BLOCK_NIL) {
+			MTD_READOOB(inftl->mbd.mtd, thisEUN * inftl->EraseSize
+				+ 8, 8, &retlen, (char *)&oob.u);
+			anac = oob.u.a.ANAC + 1;
+			nacs = oob.u.a.NACs + 1;
+		}
+
+		prev_block = inftl->VUtable[thisVUC];
+		if (prev_block < inftl->nb_blocks)
+			prev_block -= inftl->firstEUN;
+
+		parity = (nrbits(thisVUC, 16) & 0x1) ? 0x1 : 0;
+		parity |= (nrbits(prev_block, 16) & 0x1) ? 0x2 : 0;
+		parity |= (nrbits(anac, 8) & 0x1) ? 0x4 : 0;
+		parity |= (nrbits(nacs, 8) & 0x1) ? 0x8 : 0;
+ 
+		oob.u.a.virtualUnitNo = cpu_to_le16(thisVUC);
+		oob.u.a.prevUnitNo = cpu_to_le16(prev_block);
+		oob.u.a.ANAC = anac;
+		oob.u.a.NACs = nacs;
+		oob.u.a.parityPerField = parity;
+		oob.u.a.discarded = 0xaa;
+
+		MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize + 8, 8,
+			&retlen, (char *)&oob.u);
+
+		/* Also back up header... */
+		oob.u.b.virtualUnitNo = cpu_to_le16(thisVUC);
+		oob.u.b.prevUnitNo = cpu_to_le16(prev_block);
+		oob.u.b.ANAC = anac;
+		oob.u.b.NACs = nacs;
+		oob.u.b.parityPerField = parity;
+		oob.u.b.discarded = 0xaa;
+
+		MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize + 
+			SECTORSIZE * 4 + 8, 8, &retlen, (char *)&oob.u);
+
+		inftl->PUtable[writeEUN] = inftl->VUtable[thisVUC];
+		inftl->VUtable[thisVUC] = writeEUN;
+
+		inftl->numfreeEUNs--;
+		return writeEUN;
+
+	} while (silly2--);
+
+	printk(KERN_WARNING "INFTL: error folding to make room for Virtual "
+		"Unit Chain 0x%x\n", thisVUC);
+	return 0xffff;
+}
+
+/*
+ * Given a Virtual Unit Chain, see if it can be deleted, and if so do it.
+ */
+static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
+{
+	unsigned char BlockUsed[MAX_SECTORS_PER_UNIT];
+	unsigned char BlockDeleted[MAX_SECTORS_PER_UNIT];
+	unsigned int thisEUN, status;
+	int block, silly;
+	struct inftl_bci bci;
+	size_t retlen;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_trydeletechain(inftl=%p,"
+		"thisVUC=%d)\n", inftl, thisVUC);
+
+	memset(BlockUsed, 0, sizeof(BlockUsed));
+	memset(BlockDeleted, 0, sizeof(BlockDeleted));
+
+	thisEUN = inftl->VUtable[thisVUC];
+	if (thisEUN == BLOCK_NIL) {
+		printk(KERN_WARNING "INFTL: trying to delete non-existent "
+		       "Virtual Unit Chain %d!\n", thisVUC);
+		return;
+	}
+	
+	/*
+	 * Scan through the Erase Units to determine whether any data is in
+	 * each of the 512-byte blocks within the Chain.
+	 */
+	silly = MAX_LOOPS;
+	while (thisEUN < inftl->nb_blocks) {
+		for (block = 0; block < inftl->EraseSize/SECTORSIZE; block++) {
+			if (BlockUsed[block] || BlockDeleted[block])
+				continue;
+
+			if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize)
+			    + (block * SECTORSIZE), 8 , &retlen,
+			    (char *)&bci) < 0)
+				status = SECTOR_IGNORE;
+			else
+				status = bci.Status | bci.Status1;
+
+			switch(status) {
+			case SECTOR_FREE:
+			case SECTOR_IGNORE:
+				break;
+			case SECTOR_USED:
+				BlockUsed[block] = 1;
+				continue;
+			case SECTOR_DELETED:
+				BlockDeleted[block] = 1;
+				continue;
+			default:
+				printk(KERN_WARNING "INFTL: unknown status "
+					"for block %d in EUN %d: 0x%x\n",
+					block, thisEUN, status);
+			}
+		}
+
+		if (!silly--) {
+			printk(KERN_WARNING "INFTL: infinite loop in Virtual "
+				"Unit Chain 0x%x\n", thisVUC);
+			return;
+		}
+		
+		thisEUN = inftl->PUtable[thisEUN];
+	}
+
+	for (block = 0; block < inftl->EraseSize/SECTORSIZE; block++)
+		if (BlockUsed[block])
+			return;
+
+	/*
+	 * For each block in the chain free it and make it available
+	 * for future use. Erase from the oldest unit first.
+	 */
+	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: deleting empty VUC %d\n", thisVUC);
+
+	for (;;) {
+		u16 *prevEUN = &inftl->VUtable[thisVUC];
+		thisEUN = *prevEUN;
+
+		/* If the chain is all gone already, we're done */
+		if (thisEUN == BLOCK_NIL) {
+			DEBUG(MTD_DEBUG_LEVEL2, "INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
+			return;
+		}
+
+		/* Find oldest unit in chain. */
+		while (inftl->PUtable[thisEUN] != BLOCK_NIL) {
+			BUG_ON(thisEUN >= inftl->nb_blocks);
+
+			prevEUN = &inftl->PUtable[thisEUN];
+			thisEUN = *prevEUN;
+		}
+
+		DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n",
+		      thisEUN, thisVUC);
+
+                if (INFTL_formatblock(inftl, thisEUN) < 0) {
+			/*
+			 * Could not erase : mark block as reserved.
+			 */
+			inftl->PUtable[thisEUN] = BLOCK_RESERVED;
+                } else {
+			/* Correctly erased : mark it as free */
+			inftl->PUtable[thisEUN] = BLOCK_FREE;
+			inftl->numfreeEUNs++;
+		}
+
+		/* Now sort out whatever was pointing to it... */
+		*prevEUN = BLOCK_NIL;
+
+		/* Ideally we'd actually be responsive to new
+		   requests while we're doing this -- if there's
+		   free space why should others be made to wait? */
+		cond_resched();
+	}
+
+	inftl->VUtable[thisVUC] = BLOCK_NIL;
+}
+
+static int INFTL_deleteblock(struct INFTLrecord *inftl, unsigned block)
+{
+	unsigned int thisEUN = inftl->VUtable[block / (inftl->EraseSize / SECTORSIZE)];
+	unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize - 1);
+	unsigned int status;
+	int silly = MAX_LOOPS;
+	size_t retlen;
+	struct inftl_bci bci;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_deleteblock(inftl=%p,"
+		"block=%d)\n", inftl, block);
+
+	while (thisEUN < inftl->nb_blocks) {
+		if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) +
+		    blockofs, 8, &retlen, (char *)&bci) < 0)
+			status = SECTOR_IGNORE;
+		else
+			status = bci.Status | bci.Status1;
+
+		switch (status) {
+		case SECTOR_FREE:
+		case SECTOR_IGNORE:
+			break;
+		case SECTOR_DELETED:
+			thisEUN = BLOCK_NIL;
+			goto foundit;
+		case SECTOR_USED:
+			goto foundit;
+		default:
+			printk(KERN_WARNING "INFTL: unknown status for "
+				"block %d in EUN %d: 0x%x\n",
+				block, thisEUN, status);
+			break;
+		}
+
+		if (!silly--) {
+			printk(KERN_WARNING "INFTL: infinite loop in Virtual "
+				"Unit Chain 0x%x\n",
+				block / (inftl->EraseSize / SECTORSIZE));
+			return 1;
+		}
+		thisEUN = inftl->PUtable[thisEUN];
+	}
+
+foundit:
+	if (thisEUN != BLOCK_NIL) {
+		loff_t ptr = (thisEUN * inftl->EraseSize) + blockofs;
+
+		if (MTD_READOOB(inftl->mbd.mtd, ptr, 8, &retlen, (char *)&bci) < 0)
+			return -EIO;
+		bci.Status = bci.Status1 = SECTOR_DELETED;
+		if (MTD_WRITEOOB(inftl->mbd.mtd, ptr, 8, &retlen, (char *)&bci) < 0)
+			return -EIO;
+		INFTL_trydeletechain(inftl, block / (inftl->EraseSize / SECTORSIZE));
+	}
+	return 0;
+}
+
+static int inftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, 
+			    char *buffer)
+{
+	struct INFTLrecord *inftl = (void *)mbd;
+	unsigned int writeEUN;
+	unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize - 1);
+	size_t retlen;
+	struct inftl_oob oob;
+	char *p, *pend;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_writeblock(inftl=%p,block=%ld,"
+		"buffer=%p)\n", inftl, block, buffer);
+
+	/* Is block all zero? */
+	pend = buffer + SECTORSIZE;
+	for (p = buffer; p < pend && !*p; p++)
+		;
+
+	if (p < pend) {
+		writeEUN = INFTL_findwriteunit(inftl, block);
+
+		if (writeEUN == BLOCK_NIL) {
+			printk(KERN_WARNING "inftl_writeblock(): cannot find "
+				"block to write to\n");
+			/*
+			 * If we _still_ haven't got a block to use,
+			 * we're screwed.
+			 */
+			return 1;
+		}
+
+		memset(&oob, 0xff, sizeof(struct inftl_oob));
+		oob.b.Status = oob.b.Status1 = SECTOR_USED;
+		MTD_WRITEECC(inftl->mbd.mtd, (writeEUN * inftl->EraseSize) +
+			blockofs, SECTORSIZE, &retlen, (char *)buffer,
+			(char *)&oob, &inftl->oobinfo);
+		/*
+		 * need to write SECTOR_USED flags since they are not written
+		 * in mtd_writeecc
+		 */
+	} else {
+		INFTL_deleteblock(inftl, block);
+	}
+
+	return 0;
+}
+
+static int inftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
+			   char *buffer)
+{
+	struct INFTLrecord *inftl = (void *)mbd;
+	unsigned int thisEUN = inftl->VUtable[block / (inftl->EraseSize / SECTORSIZE)];
+	unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize - 1);
+        unsigned int status;
+	int silly = MAX_LOOPS;
+        struct inftl_bci bci;
+	size_t retlen;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld,"
+		"buffer=%p)\n", inftl, block, buffer);
+
+	while (thisEUN < inftl->nb_blocks) {
+		if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) +
+		     blockofs, 8, &retlen, (char *)&bci) < 0)
+			status = SECTOR_IGNORE;
+		else
+			status = bci.Status | bci.Status1;
+
+		switch (status) {
+		case SECTOR_DELETED:
+			thisEUN = BLOCK_NIL;
+			goto foundit;
+		case SECTOR_USED:
+			goto foundit;
+		case SECTOR_FREE:
+		case SECTOR_IGNORE:
+			break;
+		default:
+			printk(KERN_WARNING "INFTL: unknown status for "
+				"block %ld in EUN %d: 0x%04x\n",
+				block, thisEUN, status);
+			break;
+		}
+
+		if (!silly--) {
+			printk(KERN_WARNING "INFTL: infinite loop in "
+				"Virtual Unit Chain 0x%lx\n",
+				block / (inftl->EraseSize / SECTORSIZE));
+			return 1;
+		}
+
+		thisEUN = inftl->PUtable[thisEUN];
+	}
+
+foundit:
+	if (thisEUN == BLOCK_NIL) {
+		/* The requested block is not on the media, return all 0x00 */
+		memset(buffer, 0, SECTORSIZE);
+	} else {
+        	size_t retlen;
+		loff_t ptr = (thisEUN * inftl->EraseSize) + blockofs;
+		if (MTD_READ(inftl->mbd.mtd, ptr, SECTORSIZE, &retlen,
+		    buffer))
+			return -EIO;
+	}
+	return 0;
+}
+
+static int inftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo)
+{
+	struct INFTLrecord *inftl = (void *)dev;
+
+	geo->heads = inftl->heads;
+	geo->sectors = inftl->sectors;
+	geo->cylinders = inftl->cylinders;
+
+	return 0;
+}
+
+static struct mtd_blktrans_ops inftl_tr = {
+	.name		= "inftl",
+	.major		= INFTL_MAJOR,
+	.part_bits	= INFTL_PARTN_BITS,
+	.getgeo		= inftl_getgeo,
+	.readsect	= inftl_readblock,
+	.writesect	= inftl_writeblock,
+	.add_mtd	= inftl_add_mtd,
+	.remove_dev	= inftl_remove_dev,
+	.owner		= THIS_MODULE,
+};
+
+extern char inftlmountrev[];
+
+static int __init init_inftl(void)
+{
+	printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.18 $, "
+		"inftlmount.c %s\n", inftlmountrev);
+
+	return register_mtd_blktrans(&inftl_tr);
+}
+
+static void __exit cleanup_inftl(void)
+{
+	deregister_mtd_blktrans(&inftl_tr);
+}
+
+module_init(init_inftl);
+module_exit(cleanup_inftl);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>, David Woodhouse <dwmw2@infradead.org>, Fabrice Bellard <fabrice.bellard@netgem.com> et al.");
+MODULE_DESCRIPTION("Support code for Inverse Flash Translation Layer, used on M-Systems DiskOnChip 2000, Millennium and Millennium Plus");
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
new file mode 100644
index 000000000000..b5dda47395a7
--- /dev/null
+++ b/drivers/mtd/inftlmount.c
@@ -0,0 +1,804 @@
+/* 
+ * inftlmount.c -- INFTL mount code with extensive checks.
+ *
+ * Author: Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2002-2003, Greg Ungerer (gerg@snapgear.com)
+ *
+ * Based heavily on the nftlmount.c code which is:
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com) 
+ * Copyright (C) 2000 Netgem S.A.
+ *
+ * $Id: inftlmount.c,v 1.16 2004/11/22 13:50:53 kalev Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nftl.h>
+#include <linux/mtd/inftl.h>
+#include <linux/mtd/compatmac.h>
+
+char inftlmountrev[]="$Revision: 1.16 $";
+
+/*
+ * find_boot_record: Find the INFTL Media Header and its Spare copy which
+ *	contains the various device information of the INFTL partition and
+ *	Bad Unit Table. Update the PUtable[] table according to the Bad
+ *	Unit Table. PUtable[] is used for management of Erase Unit in
+ *	other routines in inftlcore.c and inftlmount.c.
+ */
+static int find_boot_record(struct INFTLrecord *inftl)
+{
+	struct inftl_unittail h1;
+	//struct inftl_oob oob;
+	unsigned int i, block;
+	u8 buf[SECTORSIZE];
+	struct INFTLMediaHeader *mh = &inftl->MediaHdr;
+	struct INFTLPartition *ip;
+	size_t retlen;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: find_boot_record(inftl=%p)\n", inftl);
+
+        /*
+	 * Assume logical EraseSize == physical erasesize for starting the
+	 * scan. We'll sort it out later if we find a MediaHeader which says
+	 * otherwise.
+	 */
+	inftl->EraseSize = inftl->mbd.mtd->erasesize;
+        inftl->nb_blocks = inftl->mbd.mtd->size / inftl->EraseSize;
+
+	inftl->MediaUnit = BLOCK_NIL;
+
+	/* Search for a valid boot record */
+	for (block = 0; block < inftl->nb_blocks; block++) {
+		int ret;
+
+		/*
+		 * Check for BNAND header first. Then whinge if it's found
+		 * but later checks fail.
+		 */
+		ret = MTD_READ(inftl->mbd.mtd, block * inftl->EraseSize,
+		    SECTORSIZE, &retlen, buf);
+		/* We ignore ret in case the ECC of the MediaHeader is invalid
+		   (which is apparently acceptable) */
+		if (retlen != SECTORSIZE) {
+			static int warncount = 5;
+
+			if (warncount) {
+				printk(KERN_WARNING "INFTL: block read at 0x%x "
+					"of mtd%d failed: %d\n",
+					block * inftl->EraseSize,
+					inftl->mbd.mtd->index, ret);
+				if (!--warncount)
+					printk(KERN_WARNING "INFTL: further "
+						"failures for this block will "
+						"not be printed\n");
+			}
+			continue;
+		}
+
+		if (retlen < 6 || memcmp(buf, "BNAND", 6)) {
+			/* BNAND\0 not found. Continue */
+			continue;
+		}
+
+		/* To be safer with BIOS, also use erase mark as discriminant */
+		if ((ret = MTD_READOOB(inftl->mbd.mtd, block * inftl->EraseSize +
+		    SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0)) {
+			printk(KERN_WARNING "INFTL: ANAND header found at "
+				"0x%x in mtd%d, but OOB data read failed "
+				"(err %d)\n", block * inftl->EraseSize,
+				inftl->mbd.mtd->index, ret);
+			continue;
+		}
+
+
+		/*
+		 * This is the first we've seen.
+		 * Copy the media header structure into place.
+		 */
+		memcpy(mh, buf, sizeof(struct INFTLMediaHeader));
+
+		/* Read the spare media header at offset 4096 */
+		MTD_READ(inftl->mbd.mtd, block * inftl->EraseSize + 4096,
+		    SECTORSIZE, &retlen, buf);
+		if (retlen != SECTORSIZE) {
+			printk(KERN_WARNING "INFTL: Unable to read spare "
+			       "Media Header\n");
+			return -1;
+		}
+		/* Check if this one is the same as the first one we found. */
+		if (memcmp(mh, buf, sizeof(struct INFTLMediaHeader))) {
+			printk(KERN_WARNING "INFTL: Primary and spare Media "
+			       "Headers disagree.\n");
+			return -1;
+		}
+
+		mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
+		mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
+		mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
+		mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
+		mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
+		mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+
+#ifdef CONFIG_MTD_DEBUG_VERBOSE
+		if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
+			printk("INFTL: Media Header ->\n"
+				"    bootRecordID          = %s\n"
+				"    NoOfBootImageBlocks   = %d\n"
+				"    NoOfBinaryPartitions  = %d\n"
+				"    NoOfBDTLPartitions    = %d\n"
+				"    BlockMultiplerBits    = %d\n"
+				"    FormatFlgs            = %d\n"
+				"    OsakVersion           = 0x%x\n"
+				"    PercentUsed           = %d\n",
+				mh->bootRecordID, mh->NoOfBootImageBlocks,
+				mh->NoOfBinaryPartitions,
+				mh->NoOfBDTLPartitions,
+				mh->BlockMultiplierBits, mh->FormatFlags,
+				mh->OsakVersion, mh->PercentUsed);
+		}
+#endif
+
+		if (mh->NoOfBDTLPartitions == 0) {
+			printk(KERN_WARNING "INFTL: Media Header sanity check "
+				"failed: NoOfBDTLPartitions (%d) == 0, "
+				"must be at least 1\n", mh->NoOfBDTLPartitions);
+			return -1;
+		}
+
+		if ((mh->NoOfBDTLPartitions + mh->NoOfBinaryPartitions) > 4) {
+			printk(KERN_WARNING "INFTL: Media Header sanity check "
+				"failed: Total Partitions (%d) > 4, "
+				"BDTL=%d Binary=%d\n", mh->NoOfBDTLPartitions +
+				mh->NoOfBinaryPartitions,
+				mh->NoOfBDTLPartitions,
+				mh->NoOfBinaryPartitions);
+			return -1;
+		}
+
+		if (mh->BlockMultiplierBits > 1) {
+			printk(KERN_WARNING "INFTL: sorry, we don't support "
+				"UnitSizeFactor 0x%02x\n",
+				mh->BlockMultiplierBits);
+			return -1;
+		} else if (mh->BlockMultiplierBits == 1) {
+			printk(KERN_WARNING "INFTL: support for INFTL with "
+				"UnitSizeFactor 0x%02x is experimental\n",
+				mh->BlockMultiplierBits);
+			inftl->EraseSize = inftl->mbd.mtd->erasesize <<
+				mh->BlockMultiplierBits;
+			inftl->nb_blocks = inftl->mbd.mtd->size / inftl->EraseSize;
+			block >>= mh->BlockMultiplierBits;
+		}
+
+		/* Scan the partitions */
+		for (i = 0; (i < 4); i++) {
+			ip = &mh->Partitions[i];
+			ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
+			ip->firstUnit = le32_to_cpu(ip->firstUnit);
+			ip->lastUnit = le32_to_cpu(ip->lastUnit);
+			ip->flags = le32_to_cpu(ip->flags);
+			ip->spareUnits = le32_to_cpu(ip->spareUnits);
+			ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+
+#ifdef CONFIG_MTD_DEBUG_VERBOSE
+			if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
+				printk("    PARTITION[%d] ->\n"
+					"        virtualUnits    = %d\n"
+					"        firstUnit       = %d\n"
+					"        lastUnit        = %d\n"
+					"        flags           = 0x%x\n"
+					"        spareUnits      = %d\n",
+					i, ip->virtualUnits, ip->firstUnit,
+					ip->lastUnit, ip->flags,
+					ip->spareUnits);
+			}
+#endif
+
+			if (ip->Reserved0 != ip->firstUnit) {
+				struct erase_info *instr = &inftl->instr;
+
+				instr->mtd = inftl->mbd.mtd;
+
+				/*
+				 * 	Most likely this is using the
+				 * 	undocumented qiuck mount feature.
+				 * 	We don't support that, we will need
+				 * 	to erase the hidden block for full
+				 * 	compatibility.
+				 */
+				instr->addr = ip->Reserved0 * inftl->EraseSize;
+				instr->len = inftl->EraseSize;
+				MTD_ERASE(inftl->mbd.mtd, instr);
+			}
+			if ((ip->lastUnit - ip->firstUnit + 1) < ip->virtualUnits) {
+				printk(KERN_WARNING "INFTL: Media Header "
+					"Partition %d sanity check failed\n"
+					"    firstUnit %d : lastUnit %d  >  "
+					"virtualUnits %d\n", i, ip->lastUnit,
+					ip->firstUnit, ip->Reserved0);
+				return -1;
+			}
+			if (ip->Reserved1 != 0) {
+				printk(KERN_WARNING "INFTL: Media Header "
+					"Partition %d sanity check failed: "
+					"Reserved1 %d != 0\n",
+					i, ip->Reserved1);
+				return -1;
+			}
+
+			if (ip->flags & INFTL_BDTL)
+				break;
+		}
+
+		if (i >= 4) {
+			printk(KERN_WARNING "INFTL: Media Header Partition "
+				"sanity check failed:\n       No partition "
+				"marked as Disk Partition\n");
+			return -1;
+		}
+
+		inftl->nb_boot_blocks = ip->firstUnit;
+		inftl->numvunits = ip->virtualUnits;
+		if (inftl->numvunits > (inftl->nb_blocks -
+		    inftl->nb_boot_blocks - 2)) {
+			printk(KERN_WARNING "INFTL: Media Header sanity check "
+				"failed:\n        numvunits (%d) > nb_blocks "
+				"(%d) - nb_boot_blocks(%d) - 2\n",
+				inftl->numvunits, inftl->nb_blocks,
+				inftl->nb_boot_blocks);
+			return -1;
+		}
+		
+		inftl->mbd.size  = inftl->numvunits *
+			(inftl->EraseSize / SECTORSIZE);
+
+		/*
+		 * Block count is set to last used EUN (we won't need to keep
+		 * any meta-data past that point).
+		 */
+		inftl->firstEUN = ip->firstUnit;
+		inftl->lastEUN = ip->lastUnit;
+		inftl->nb_blocks = ip->lastUnit + 1;
+
+		/* Memory alloc */
+		inftl->PUtable = kmalloc(inftl->nb_blocks * sizeof(u16), GFP_KERNEL);
+		if (!inftl->PUtable) {
+			printk(KERN_WARNING "INFTL: allocation of PUtable "
+				"failed (%zd bytes)\n",
+				inftl->nb_blocks * sizeof(u16));
+			return -ENOMEM;
+		}
+
+		inftl->VUtable = kmalloc(inftl->nb_blocks * sizeof(u16), GFP_KERNEL);
+		if (!inftl->VUtable) {
+			kfree(inftl->PUtable);
+			printk(KERN_WARNING "INFTL: allocation of VUtable "
+				"failed (%zd bytes)\n",
+				inftl->nb_blocks * sizeof(u16));
+			return -ENOMEM;
+		}
+		
+		/* Mark the blocks before INFTL MediaHeader as reserved */
+		for (i = 0; i < inftl->nb_boot_blocks; i++)
+			inftl->PUtable[i] = BLOCK_RESERVED;
+		/* Mark all remaining blocks as potentially containing data */
+		for (; i < inftl->nb_blocks; i++)
+			inftl->PUtable[i] = BLOCK_NOTEXPLORED;
+
+		/* Mark this boot record (NFTL MediaHeader) block as reserved */
+		inftl->PUtable[block] = BLOCK_RESERVED;
+
+		/* Read Bad Erase Unit Table and modify PUtable[] accordingly */
+		for (i = 0; i < inftl->nb_blocks; i++) {
+			int physblock;
+			/* If any of the physical eraseblocks are bad, don't
+			   use the unit. */
+			for (physblock = 0; physblock < inftl->EraseSize; physblock += inftl->mbd.mtd->erasesize) {
+				if (inftl->mbd.mtd->block_isbad(inftl->mbd.mtd, i * inftl->EraseSize + physblock))
+					inftl->PUtable[i] = BLOCK_RESERVED;
+			}
+		}
+
+		inftl->MediaUnit = block;
+		return 0;
+	}
+
+	/* Not found. */
+	return -1;
+}
+
+static int memcmpb(void *a, int c, int n)
+{
+	int i;
+	for (i = 0; i < n; i++) {
+		if (c != ((unsigned char *)a)[i])
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * check_free_sector: check if a free sector is actually FREE,
+ *	i.e. All 0xff in data and oob area.
+ */
+static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address,
+	int len, int check_oob)
+{
+	u8 buf[SECTORSIZE + inftl->mbd.mtd->oobsize];
+	size_t retlen;
+	int i;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: check_free_sectors(inftl=%p,"
+		"address=0x%x,len=%d,check_oob=%d)\n", inftl,
+		address, len, check_oob);
+
+	for (i = 0; i < len; i += SECTORSIZE) {
+		if (MTD_READECC(inftl->mbd.mtd, address, SECTORSIZE, &retlen, buf, &buf[SECTORSIZE], &inftl->oobinfo) < 0)
+			return -1;
+		if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
+			return -1;
+
+		if (check_oob) {
+			if (memcmpb(buf + SECTORSIZE, 0xff, inftl->mbd.mtd->oobsize) != 0)
+				return -1;
+		}
+		address += SECTORSIZE;
+	}
+
+	return 0;
+}
+
+/*
+ * INFTL_format: format a Erase Unit by erasing ALL Erase Zones in the Erase
+ *		 Unit and Update INFTL metadata. Each erase operation is
+ *		 checked with check_free_sectors.
+ *
+ * Return: 0 when succeed, -1 on error.
+ *
+ * ToDo: 1. Is it neceressary to check_free_sector after erasing ?? 
+ */
+int INFTL_formatblock(struct INFTLrecord *inftl, int block)
+{
+	size_t retlen;
+	struct inftl_unittail uci;
+	struct erase_info *instr = &inftl->instr;
+	int physblock;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p,"
+		"block=%d)\n", inftl, block);
+
+	memset(instr, 0, sizeof(struct erase_info));
+
+	/* FIXME: Shouldn't we be setting the 'discarded' flag to zero
+	   _first_? */
+
+	/* Use async erase interface, test return code */
+	instr->mtd = inftl->mbd.mtd;
+	instr->addr = block * inftl->EraseSize;
+	instr->len = inftl->mbd.mtd->erasesize;
+	/* Erase one physical eraseblock at a time, even though the NAND api
+	   allows us to group them.  This way we if we have a failure, we can
+	   mark only the failed block in the bbt. */
+	for (physblock = 0; physblock < inftl->EraseSize; physblock += instr->len, instr->addr += instr->len) {
+		MTD_ERASE(inftl->mbd.mtd, instr);
+
+		if (instr->state == MTD_ERASE_FAILED) {
+			printk(KERN_WARNING "INFTL: error while formatting block %d\n",
+				block);
+			goto fail;
+		}
+
+		/*
+	 	* Check the "freeness" of Erase Unit before updating metadata.
+	 	* FixMe: is this check really necessary? Since we have check the
+	 	*        return code after the erase operation.
+	 	*/
+		if (check_free_sectors(inftl, instr->addr, instr->len, 1) != 0)
+			goto fail;
+	}
+
+	uci.EraseMark = cpu_to_le16(ERASE_MARK);
+	uci.EraseMark1 = cpu_to_le16(ERASE_MARK);
+	uci.Reserved[0] = 0;
+	uci.Reserved[1] = 0;
+	uci.Reserved[2] = 0;
+	uci.Reserved[3] = 0;
+	instr->addr = block * inftl->EraseSize + SECTORSIZE * 2;
+	if (MTD_WRITEOOB(inftl->mbd.mtd, instr->addr +
+	    8, 8, &retlen, (char *)&uci) < 0)
+		goto fail;
+	return 0;
+fail:
+	/* could not format, update the bad block table (caller is responsible
+	   for setting the PUtable to BLOCK_RESERVED on failure) */
+	inftl->mbd.mtd->block_markbad(inftl->mbd.mtd, instr->addr);
+	return -1;
+}
+
+/*
+ * format_chain: Format an invalid Virtual Unit chain. It frees all the Erase
+ *	Units in a Virtual Unit Chain, i.e. all the units are disconnected.
+ *
+ *	Since the chain is invalid then we will have to erase it from its
+ *	head (normally for INFTL we go from the oldest). But if it has a
+ *	loop then there is no oldest...
+ */
+static void format_chain(struct INFTLrecord *inftl, unsigned int first_block)
+{
+	unsigned int block = first_block, block1;
+
+	printk(KERN_WARNING "INFTL: formatting chain at block %d\n",
+		first_block);
+
+	for (;;) {
+		block1 = inftl->PUtable[block];
+
+		printk(KERN_WARNING "INFTL: formatting block %d\n", block);
+		if (INFTL_formatblock(inftl, block) < 0) {
+			/*
+			 * Cannot format !!!! Mark it as Bad Unit,
+			 */
+			inftl->PUtable[block] = BLOCK_RESERVED;
+		} else {
+			inftl->PUtable[block] = BLOCK_FREE;
+		}
+
+		/* Goto next block on the chain */
+		block = block1;
+
+		if (block == BLOCK_NIL || block >= inftl->lastEUN)
+			break;
+	}
+}
+
+void INFTL_dumptables(struct INFTLrecord *s)
+{
+	int i;
+
+	printk("-------------------------------------------"
+		"----------------------------------\n");
+
+	printk("VUtable[%d] ->", s->nb_blocks);
+	for (i = 0; i < s->nb_blocks; i++) {
+		if ((i % 8) == 0)
+			printk("\n%04x: ", i);
+		printk("%04x ", s->VUtable[i]);
+	}
+
+	printk("\n-------------------------------------------"
+		"----------------------------------\n");
+
+	printk("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
+	for (i = 0; i <= s->lastEUN; i++) {
+		if ((i % 8) == 0)
+			printk("\n%04x: ", i);
+		printk("%04x ", s->PUtable[i]);
+	}
+
+	printk("\n-------------------------------------------"
+		"----------------------------------\n");
+
+	printk("INFTL ->\n"
+		"  EraseSize       = %d\n"
+		"  h/s/c           = %d/%d/%d\n"
+		"  numvunits       = %d\n"
+		"  firstEUN        = %d\n"
+		"  lastEUN         = %d\n"
+		"  numfreeEUNs     = %d\n"
+		"  LastFreeEUN     = %d\n"
+		"  nb_blocks       = %d\n"
+		"  nb_boot_blocks  = %d",
+		s->EraseSize, s->heads, s->sectors, s->cylinders,
+		s->numvunits, s->firstEUN, s->lastEUN, s->numfreeEUNs,
+		s->LastFreeEUN, s->nb_blocks, s->nb_boot_blocks);
+
+	printk("\n-------------------------------------------"
+		"----------------------------------\n");
+}
+
+void INFTL_dumpVUchains(struct INFTLrecord *s)
+{
+	int logical, block, i;
+
+	printk("-------------------------------------------"
+		"----------------------------------\n");
+
+	printk("INFTL Virtual Unit Chains:\n");
+	for (logical = 0; logical < s->nb_blocks; logical++) {
+		block = s->VUtable[logical];
+		if (block > s->nb_blocks)
+			continue;
+		printk("  LOGICAL %d --> %d ", logical, block);
+		for (i = 0; i < s->nb_blocks; i++) {
+			if (s->PUtable[block] == BLOCK_NIL)
+				break;
+			block = s->PUtable[block];
+			printk("%d ", block);
+		}
+		printk("\n");
+	}
+
+	printk("-------------------------------------------"
+		"----------------------------------\n");
+}
+
+int INFTL_mount(struct INFTLrecord *s)
+{
+	unsigned int block, first_block, prev_block, last_block;
+	unsigned int first_logical_block, logical_block, erase_mark;
+	int chain_length, do_format_chain;
+	struct inftl_unithead1 h0;
+	struct inftl_unittail h1;
+	size_t retlen;
+	int i;
+	u8 *ANACtable, ANAC;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_mount(inftl=%p)\n", s);
+
+	/* Search for INFTL MediaHeader and Spare INFTL Media Header */
+	if (find_boot_record(s) < 0) {
+		printk(KERN_WARNING "INFTL: could not find valid boot record?\n");
+		return -1;
+	}
+
+	/* Init the logical to physical table */
+	for (i = 0; i < s->nb_blocks; i++)
+		s->VUtable[i] = BLOCK_NIL;
+
+	logical_block = block = BLOCK_NIL;
+
+	/* Temporary buffer to store ANAC numbers. */
+	ANACtable = kmalloc(s->nb_blocks * sizeof(u8), GFP_KERNEL);
+	memset(ANACtable, 0, s->nb_blocks);
+
+	/*
+	 * First pass is to explore each physical unit, and construct the
+	 * virtual chains that exist (newest physical unit goes into VUtable).
+	 * Any block that is in any way invalid will be left in the
+	 * NOTEXPLORED state. Then at the end we will try to format it and
+	 * mark it as free.
+	 */
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 1, explore each unit\n");
+	for (first_block = s->firstEUN; first_block <= s->lastEUN; first_block++) {
+		if (s->PUtable[first_block] != BLOCK_NOTEXPLORED)
+			continue;
+
+		do_format_chain = 0;
+		first_logical_block = BLOCK_NIL;
+		last_block = BLOCK_NIL;
+		block = first_block;
+
+		for (chain_length = 0; ; chain_length++) {
+
+			if ((chain_length == 0) && 
+			    (s->PUtable[block] != BLOCK_NOTEXPLORED)) {
+				/* Nothing to do here, onto next block */
+				break;
+			}
+
+			if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8,
+			    8, &retlen, (char *)&h0) < 0 ||
+			    MTD_READOOB(s->mbd.mtd, block * s->EraseSize +
+			    2 * SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0) {
+				/* Should never happen? */
+				do_format_chain++;
+				break;
+			}
+
+			logical_block = le16_to_cpu(h0.virtualUnitNo);
+			prev_block = le16_to_cpu(h0.prevUnitNo);
+			erase_mark = le16_to_cpu((h1.EraseMark | h1.EraseMark1));
+			ANACtable[block] = h0.ANAC;
+
+			/* Previous block is relative to start of Partition */
+			if (prev_block < s->nb_blocks)
+				prev_block += s->firstEUN;
+
+			/* Already explored partial chain? */
+			if (s->PUtable[block] != BLOCK_NOTEXPLORED) {
+				/* Check if chain for this logical */
+				if (logical_block == first_logical_block) {
+					if (last_block != BLOCK_NIL)
+						s->PUtable[last_block] = block;
+				}
+				break;
+			}
+
+			/* Check for invalid block */
+			if (erase_mark != ERASE_MARK) {
+				printk(KERN_WARNING "INFTL: corrupt block %d "
+					"in chain %d, chain length %d, erase "
+					"mark 0x%x?\n", block, first_block,
+					chain_length, erase_mark);
+				/*
+				 * Assume end of chain, probably incomplete
+				 * fold/erase...
+				 */
+				if (chain_length == 0)
+					do_format_chain++;
+				break;
+			}
+
+			/* Check for it being free already then... */
+			if ((logical_block == BLOCK_FREE) ||
+			    (logical_block == BLOCK_NIL)) {
+				s->PUtable[block] = BLOCK_FREE;
+				break;
+			}
+
+			/* Sanity checks on block numbers */
+			if ((logical_block >= s->nb_blocks) ||
+			    ((prev_block >= s->nb_blocks) &&
+			     (prev_block != BLOCK_NIL))) {
+				if (chain_length > 0) {
+					printk(KERN_WARNING "INFTL: corrupt "
+						"block %d in chain %d?\n",
+						block, first_block);
+					do_format_chain++;
+				}
+				break;
+			}
+
+			if (first_logical_block == BLOCK_NIL) {
+				first_logical_block = logical_block;
+			} else {
+				if (first_logical_block != logical_block) {
+					/* Normal for folded chain... */
+					break;
+				}
+			}
+
+			/*
+			 * Current block is valid, so if we followed a virtual
+			 * chain to get here then we can set the previous
+			 * block pointer in our PUtable now. Then move onto
+			 * the previous block in the chain.
+			 */
+			s->PUtable[block] = BLOCK_NIL;
+			if (last_block != BLOCK_NIL)
+				s->PUtable[last_block] = block;
+			last_block = block;
+			block = prev_block;
+
+			/* Check for end of chain */
+			if (block == BLOCK_NIL)
+				break;
+
+			/* Validate next block before following it... */
+			if (block > s->lastEUN) {
+				printk(KERN_WARNING "INFTL: invalid previous "
+					"block %d in chain %d?\n", block,
+					first_block);
+				do_format_chain++;
+				break;
+			}
+		}
+
+		if (do_format_chain) {
+			format_chain(s, first_block);
+			continue;
+		}
+
+		/*
+		 * Looks like a valid chain then. It may not really be the
+		 * newest block in the chain, but it is the newest we have
+		 * found so far. We might update it in later iterations of
+		 * this loop if we find something newer.
+		 */
+		s->VUtable[first_logical_block] = first_block;
+		logical_block = BLOCK_NIL;
+	}
+
+#ifdef CONFIG_MTD_DEBUG_VERBOSE
+	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+		INFTL_dumptables(s);
+#endif
+
+	/*
+	 * Second pass, check for infinite loops in chains. These are
+	 * possible because we don't update the previous pointers when
+	 * we fold chains. No big deal, just fix them up in PUtable.
+	 */
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 2, validate virtual chains\n");
+	for (logical_block = 0; logical_block < s->numvunits; logical_block++) {
+		block = s->VUtable[logical_block];
+		last_block = BLOCK_NIL;
+
+		/* Check for free/reserved/nil */
+		if (block >= BLOCK_RESERVED)
+			continue;
+
+		ANAC = ANACtable[block];
+		for (i = 0; i < s->numvunits; i++) {
+			if (s->PUtable[block] == BLOCK_NIL)
+				break;
+			if (s->PUtable[block] > s->lastEUN) {
+				printk(KERN_WARNING "INFTL: invalid prev %d, "
+					"in virtual chain %d\n",
+					s->PUtable[block], logical_block);
+				s->PUtable[block] = BLOCK_NIL;
+					
+			}
+			if (ANACtable[block] != ANAC) {
+				/*
+				 * Chain must point back to itself. This is ok,
+				 * but we will need adjust the tables with this
+				 * newest block and oldest block.
+				 */
+				s->VUtable[logical_block] = block;
+				s->PUtable[last_block] = BLOCK_NIL;
+				break;
+			}
+
+			ANAC--;
+			last_block = block;
+			block = s->PUtable[block];
+		}
+
+		if (i >= s->nb_blocks) {
+			/*
+			 * Uhoo, infinite chain with valid ANACS!
+			 * Format whole chain...
+			 */
+			format_chain(s, first_block);
+		}
+	}
+
+#ifdef CONFIG_MTD_DEBUG_VERBOSE
+	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+		INFTL_dumptables(s);
+	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+		INFTL_dumpVUchains(s);
+#endif
+
+	/*
+	 * Third pass, format unreferenced blocks and init free block count.
+	 */
+	s->numfreeEUNs = 0;
+	s->LastFreeEUN = BLOCK_NIL;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 3, format unused blocks\n");
+	for (block = s->firstEUN; block <= s->lastEUN; block++) {
+		if (s->PUtable[block] == BLOCK_NOTEXPLORED) {
+			printk("INFTL: unreferenced block %d, formatting it\n",
+				block);
+			if (INFTL_formatblock(s, block) < 0)
+				s->PUtable[block] = BLOCK_RESERVED;
+			else
+				s->PUtable[block] = BLOCK_FREE;
+		}
+		if (s->PUtable[block] == BLOCK_FREE) {
+			s->numfreeEUNs++;
+			if (s->LastFreeEUN == BLOCK_NIL)
+				s->LastFreeEUN = block;
+		}
+	}
+
+	kfree(ANACtable);
+	return 0;
+}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
new file mode 100644
index 000000000000..8480057eadb4
--- /dev/null
+++ b/drivers/mtd/maps/Kconfig
@@ -0,0 +1,663 @@
+# drivers/mtd/maps/Kconfig
+# $Id: Kconfig,v 1.42 2005/01/05 16:59:50 dwmw2 Exp $
+
+menu "Mapping drivers for chip access"
+	depends on MTD!=n
+
+config MTD_COMPLEX_MAPPINGS
+	bool "Support non-linear mappings of flash chips"
+	depends on MTD
+	help
+	  This causes the chip drivers to allow for complicated
+	  paged mappings of flash chips.
+
+config MTD_PHYSMAP
+	tristate "CFI Flash device in physical memory map"
+	depends on MTD_CFI
+	help
+	  This provides a 'mapping' driver which allows the CFI probe and
+	  command set driver code to communicate with flash chips which
+	  are mapped physically into the CPU's memory. You will need to
+	  configure the physical address and size of the flash chips on
+	  your particular board as well as the bus width, either statically
+	  with config options or at run-time.
+
+config MTD_PHYSMAP_START
+	hex "Physical start address of flash mapping"
+	depends on MTD_PHYSMAP
+	default "0x8000000"
+	help
+	  This is the physical memory location at which the flash chips
+	  are mapped on your particular target board. Refer to the
+	  memory map which should hopefully be in the documentation for
+	  your board.
+	  Ignore this option if you use run-time physmap configuration
+	  (i.e., run-time calling physmap_configure()).
+
+config MTD_PHYSMAP_LEN
+	hex "Physical length of flash mapping"
+	depends on MTD_PHYSMAP
+	default "0x4000000"
+	help
+	  This is the total length of the mapping of the flash chips on
+	  your particular board. If there is space, or aliases, in the
+	  physical memory map between the chips, this could be larger
+	  than the total amount of flash present. Refer to the memory
+	  map which should hopefully be in the documentation for your
+	  board.
+	  Ignore this option if you use run-time physmap configuration
+	  (i.e., run-time calling physmap_configure()).
+
+config MTD_PHYSMAP_BANKWIDTH
+	int "Bank width in octets"
+	depends on MTD_PHYSMAP
+	default "2"
+	help
+	  This is the total width of the data bus of the flash devices
+	  in octets. For example, if you have a data bus width of 32
+	  bits, you would set the bus width octect value to 4. This is
+	  used internally by the CFI drivers.
+	  Ignore this option if you use run-time physmap configuration
+	  (i.e., run-time calling physmap_configure()).
+
+config MTD_SUN_UFLASH
+	tristate "Sun Microsystems userflash support"
+	depends on (SPARC32 || SPARC64) && MTD_CFI
+	help
+	  This provides a 'mapping' driver which supports the way in 
+	  which user-programmable flash chips are connected on various 
+	  Sun Microsystems boardsets.  This driver will require CFI support 
+	  in the kernel, so if you did not enable CFI previously, do that now.
+
+config MTD_PNC2000
+	tristate "CFI Flash device mapped on Photron PNC-2000"
+	depends on X86 && MTD_CFI && MTD_PARTITIONS
+	help
+	  PNC-2000 is the name of Network Camera product from PHOTRON
+	  Ltd. in Japan. It uses CFI-compliant flash.
+
+config MTD_SC520CDP
+	tristate "CFI Flash device mapped on AMD SC520 CDP"
+	depends on X86 && MTD_CFI
+	help
+	  The SC520 CDP board has two banks of CFI-compliant chips and one
+	  Dual-in-line JEDEC chip. This 'mapping' driver supports that
+	  arrangement, implementing three MTD devices.
+
+config MTD_NETSC520
+	tristate "CFI Flash device mapped on AMD NetSc520"
+	depends on X86 && MTD_CFI && MTD_PARTITIONS
+	help
+	  This enables access routines for the flash chips on the AMD NetSc520
+	  demonstration board. If you have one of these boards and would like 
+	  to use the flash chips on it, say 'Y'.
+
+config MTD_TS5500
+	tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
+	depends on X86 && MTD_JEDECPROBE && MTD_PARTITIONS
+	help
+	  This provides a driver for the on-board flash of the Technologic
+	  System's TS-5500 board. The flash is split into 3 partitions
+	  which are accessed as separate MTD devices.
+
+	  mtd0 and mtd2 are the two BIOS drives. Unfortunately the BIOS
+	  uses a proprietary flash translation layer from General Software,
+	  which is not supported (the drives cannot be mounted). You can
+	  create your own file system (jffs for example), but the BIOS
+	  won't be able to boot from it.
+
+	  mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
+
+	  Note that jumper 3 ("Write Enable Drive A") must be set
+	  otherwise detection won't succeeed.
+
+config MTD_SBC_GXX
+	tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
+	depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
+	help
+	  This provides a driver for the on-board flash of Arcom Control
+	  Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
+	  By default the flash is split into 3 partitions which are accessed
+	  as separate MTD devices. This board utilizes Intel StrataFlash.
+	  More info at
+	  <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
+
+config MTD_ELAN_104NC
+	tristate "CFI Flash device mapped on Arcom ELAN-104NC"
+	depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
+	help
+	  This provides a driver for the on-board flash of the Arcom Control
+	  System's ELAN-104NC development board. By default the flash
+	  is split into 3 partitions which are accessed as separate MTD
+	  devices. This board utilizes Intel StrataFlash. More info at
+	  <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>.
+
+config MTD_LUBBOCK
+	tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
+	depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
+	help
+	  This provides a driver for the on-board flash of the Intel
+	  'Lubbock' XScale evaluation board.
+
+config MTD_OCTAGON
+	tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
+	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
+	help
+	  This provides a 'mapping' driver which supports the way in which
+	  the flash chips are connected in the Octagon-5066 Single Board
+	  Computer. More information on the board is available at
+	  <http://www.octagonsystems.com/CPUpages/5066.html>.
+
+config MTD_VMAX
+	tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
+	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
+	help
+	  This provides a 'mapping' driver which supports the way in which
+	  the flash chips are connected in the Tempustech VMAX SBC301 Single
+	  Board Computer. More information on the board is available at
+	  <http://www.tempustech.com/>.
+
+config MTD_SCx200_DOCFLASH
+	tristate "Flash device mapped with DOCCS on NatSemi SCx200"
+	depends on SCx200 && MTD_CFI && MTD_PARTITIONS
+	help
+	  Enable support for a flash chip mapped using the DOCCS signal on a
+	  National Semiconductor SCx200 processor.
+
+	  If you don't know what to do here, say N.
+
+	  If compiled as a module, it will be called scx200_docflash.
+
+config MTD_AMD76XROM
+	tristate "BIOS flash chip on AMD76x southbridge"
+	depends on X86 && MTD_JEDECPROBE
+	help
+	  Support for treating the BIOS flash chip on AMD76x motherboards
+	  as an MTD device - with this you can reprogram your BIOS.
+
+	  BE VERY CAREFUL.
+
+config MTD_ICHXROM
+	tristate "BIOS flash chip on Intel Controller Hub 2/3/4/5"
+	depends on X86 && MTD_JEDECPROBE
+	help
+	  Support for treating the BIOS flash chip on ICHX motherboards
+	  as an MTD device - with this you can reprogram your BIOS.
+
+	  BE VERY CAREFUL.
+
+config MTD_SCB2_FLASH
+	tristate "BIOS flash chip on Intel SCB2 boards"
+	depends on X86 && MTD_JEDECPROBE
+	help
+	  Support for treating the BIOS flash chip on Intel SCB2 boards
+	  as an MTD device - with this you can reprogram your BIOS.
+
+	  BE VERY CAREFUL.
+
+config MTD_TSUNAMI
+	tristate "Flash chips on Tsunami TIG bus"
+	depends on ALPHA_TSUNAMI && MTD_COMPLEX_MAPPINGS
+	help
+	  Support for the flash chip on Tsunami TIG bus.
+
+config MTD_LASAT
+	tristate "Flash chips on LASAT board"
+	depends on LASAT
+	help
+	  Support for the flash chips on the Lasat 100 and 200 boards.
+
+config MTD_NETtel
+	tristate "CFI flash device on SnapGear/SecureEdge"
+	depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE
+	help
+	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
+
+config MTD_PB1XXX
+	tristate "Flash devices on Alchemy PB1xxx boards"
+	depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 )
+	help
+	  Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards
+
+config MTD_PB1XXX_BOOT
+	bool "PB1x00 boot flash device"
+	depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
+	help
+	  Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board.
+	  You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use
+	  both banks.
+
+config MTD_PB1XXX_USER
+	bool "PB1x00 user flash device"
+	depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
+	default y if MTD_PB1XX_BOOT = n
+	help
+	  Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board.
+	  You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use
+	  both banks.
+
+config MTD_PB1550
+	tristate "Flash devices on Alchemy PB1550 board"
+	depends on MIPS && MIPS_PB1550
+	help
+	  Flash memory access on Alchemy Pb1550 board
+
+config MTD_PB1550_BOOT
+	bool "PB1550 boot flash device"
+	depends on MTD_PB1550
+	help
+	  Use the first of the two 64MiB flash banks on Pb1550 board.
+	  You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use
+	  both banks.
+
+config MTD_PB1550_USER
+	bool "PB1550 user flash device"
+	depends on MTD_PB1550
+	default y if MTD_PB1550_BOOT = n
+	help
+	  Use the second of the two 64MiB flash banks on Pb1550 board.
+	  You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use
+	  both banks.
+
+config MTD_DB1550
+	tristate "Flash devices on Alchemy DB1550 board"
+	depends on MIPS && MIPS_DB1550
+	help
+	  Flash memory access on Alchemy Db1550 board
+
+config MTD_DB1550_BOOT
+	bool "DB1550 boot flash device"
+	depends on MTD_DB1550
+	help
+	  Use the first of the two 64MiB flash banks on Db1550 board.
+	  You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use
+	  both banks.
+
+config MTD_DB1550_USER
+	bool "DB1550 user flash device"
+	depends on MTD_DB1550
+	default y if MTD_DB1550_BOOT = n
+	help
+	  Use the second of the two 64MiB flash banks on Db1550 board.
+	  You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use
+	  both banks.
+
+config MTD_DILNETPC
+	tristate "CFI Flash device mapped on DIL/Net PC"
+	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
+	help
+	  MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
+	  For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
+ 	  and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
+
+config MTD_DILNETPC_BOOTSIZE
+	hex "Size of DIL/Net PC flash boot partition"
+	depends on MTD_DILNETPC
+	default "0x80000"
+	help
+	  The amount of space taken up by the kernel or Etherboot
+	  on the DIL/Net PC flash chips.
+
+config MTD_L440GX
+	tristate "BIOS flash chip on Intel L440GX boards"
+	depends on X86 && MTD_JEDECPROBE
+	help
+	  Support for treating the BIOS flash chip on Intel L440GX motherboards
+	  as an MTD device - with this you can reprogram your BIOS.
+
+	  BE VERY CAREFUL.
+
+config MTD_SBC8240
+	tristate "Flash device on SBC8240"
+	depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260
+	help
+          Flash access on the SBC8240 board from Wind River.  See
+          <http://www.windriver.com/products/sbc8240/>
+
+config MTD_TQM8XXL
+	tristate "CFI Flash device mapped on TQM8XXL"
+	depends on MTD_CFI && PPC32 && 8xx && TQM8xxL
+	help
+	  The TQM8xxL PowerPC board has up to two banks of CFI-compliant
+	  chips, currently uses AMD one. This 'mapping' driver supports
+	  that arrangement, allowing the CFI probe and command set driver
+	  code to communicate with the chips on the TQM8xxL board. More at
+	  <http://www.denx.de/embedded-ppc-en.html>.
+
+config MTD_RPXLITE
+	tristate "CFI Flash device mapped on RPX Lite or CLLF"
+	depends on MTD_CFI && PPC32 && 8xx && (RPXCLASSIC || RPXLITE)
+	help
+	  The RPXLite PowerPC board has CFI-compliant chips mapped in
+	  a strange sparse mapping. This 'mapping' driver supports that
+	  arrangement, allowing the CFI probe and command set driver code
+	  to communicate with the chips on the RPXLite board. More at
+	  <http://www.embeddedplanet.com/>.
+
+config MTD_MBX860
+	tristate "System flash on MBX860 board"
+	depends on MTD_CFI && PPC32 && 8xx && MBX
+	help
+	  This enables access routines for the flash chips on the Motorola
+	  MBX860 board. If you have one of these boards and would like
+	  to use the flash chips on it, say 'Y'.
+
+config MTD_DBOX2
+	tristate "CFI Flash device mapped on D-Box2"
+	depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
+	help
+	  This enables access routines for the flash chips on the Nokia/Sagem
+	  D-Box 2 board. If you have one of these boards and would like to use
+	  the flash chips on it, say 'Y'.
+
+config MTD_CFI_FLAGADM
+	tristate "CFI Flash device mapping on FlagaDM"
+	depends on PPC32 && 8xx && MTD_CFI
+	help
+	  Mapping for the Flaga digital module. If you don't have one, ignore
+	  this setting.
+
+config MTD_BEECH
+	tristate "CFI Flash device mapped on IBM 405LP Beech"
+	depends on MTD_CFI && PPC32 && 40x && BEECH
+	help
+	  This enables access routines for the flash chips on the IBM
+	  405LP Beech board. If you have one of these boards and would like
+	  to use the flash chips on it, say 'Y'.
+
+config MTD_ARCTIC
+	tristate "CFI Flash device mapped on IBM 405LP Arctic"
+	depends on MTD_CFI && PPC32 && 40x && ARCTIC2
+	help
+	  This enables access routines for the flash chips on the IBM 405LP
+	  Arctic board. If you have one of these boards and would like to
+	  use the flash chips on it, say 'Y'.
+
+config MTD_WALNUT
+	tristate "Flash device mapped on IBM 405GP Walnut"
+	depends on MTD_JEDECPROBE && PPC32 && 40x && WALNUT
+	help
+	  This enables access routines for the flash chips on the IBM 405GP
+	  Walnut board. If you have one of these boards and would like to
+	  use the flash chips on it, say 'Y'.
+
+config MTD_EBONY
+	tristate "Flash devices mapped on IBM 440GP Ebony"
+	depends on MTD_JEDECPROBE && PPC32 && 44x && EBONY
+	help
+	  This enables access routines for the flash chips on the IBM 440GP
+	  Ebony board. If you have one of these boards and would like to
+	  use the flash chips on it, say 'Y'.
+
+config MTD_OCOTEA
+	tristate "Flash devices mapped on IBM 440GX Ocotea"
+	depends on MTD_CFI && PPC32 && 44x && OCOTEA
+	help
+	  This enables access routines for the flash chips on the IBM 440GX
+	  Ocotea board. If you have one of these boards and would like to
+	  use the flash chips on it, say 'Y'.
+
+config MTD_REDWOOD
+	tristate "CFI Flash devices mapped on IBM Redwood"
+	depends on MTD_CFI && PPC32 && 4xx && 40x && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+	help
+	  This enables access routines for the flash chips on the IBM
+	  Redwood board. If you have one of these boards and would like to
+	  use the flash chips on it, say 'Y'.
+
+config MTD_CSTM_MIPS_IXX
+	tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
+	depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
+	help
+	  This provides a mapping driver for the Integrated Technology
+	  Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
+	  Reference Board. It provides the necessary addressing, length,
+	  buswidth, vpp code and addition setup of the flash device for
+	  these boards. In addition, this mapping driver can be used for
+	  other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
+	  LEN/BUSWIDTH parameters. This mapping will provide one mtd device
+	  using one partition. The start address can be offset from the
+	  beginning of flash and the len can be less than the total flash
+	  device size to allow a window into the flash. Both CFI and JEDEC
+	  probes are called.
+
+config MTD_CSTM_MIPS_IXX_START
+	hex "Physical start address of flash mapping"
+	depends on MTD_CSTM_MIPS_IXX
+	default "0x8000000"
+	help
+	  This is the physical memory location that the MTD driver will
+	  use for the flash chips on your particular target board. 
+	  Refer to the memory map which should hopefully be in the 
+	  documentation for your board.
+
+config MTD_CSTM_MIPS_IXX_LEN
+	hex "Physical length of flash mapping"
+	depends on MTD_CSTM_MIPS_IXX
+	default "0x4000000"
+	help
+	  This is the total length that the MTD driver will use for the 
+	  flash chips on your particular board.  Refer to the memory
+	  map which should hopefully be in the documentation for your
+	  board.
+
+config MTD_CSTM_MIPS_IXX_BUSWIDTH
+	int "Bus width in octets"
+	depends on MTD_CSTM_MIPS_IXX
+	default "2"
+	help
+	  This is the total bus width of the mapping of the flash chips
+	  on your particular board.
+
+config MTD_OCELOT
+	tristate "Momenco Ocelot boot flash device"
+	depends on MIPS && MOMENCO_OCELOT
+	help
+	  This enables access routines for the boot flash device and for the
+	  NVRAM on the Momenco Ocelot board. If you have one of these boards
+	  and would like access to either of these, say 'Y'.
+
+config MTD_SOLUTIONENGINE
+	tristate "CFI Flash device mapped on Hitachi SolutionEngine"
+	depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
+	help
+	  This enables access to the flash chips on the Hitachi SolutionEngine and
+	  similar boards. Say 'Y' if you are building a kernel for such a board.
+
+config MTD_ARM_INTEGRATOR
+	tristate "CFI Flash device mapped on ARM Integrator/P720T"
+	depends on ARM && MTD_CFI
+
+config MTD_CDB89712
+	tristate "Cirrus CDB89712 evaluation board mappings"
+	depends on ARM && MTD_CFI && ARCH_CDB89712
+	help
+	  This enables access to the flash or ROM chips on the CDB89712 board.
+	  If you have such a board, say 'Y'.
+
+config MTD_SA1100
+	tristate "CFI Flash device mapped on StrongARM SA11x0"
+	depends on ARM && MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
+	help
+	  This enables access to the flash chips on most platforms based on
+	  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
+	  If you have such a board, say 'Y'.
+
+config MTD_IPAQ
+	tristate "CFI Flash device mapped on Compaq/HP iPAQ"
+	depends on ARM && IPAQ_HANDHELD && MTD_CFI
+	help
+	  This provides a driver for the on-board flash of the iPAQ.
+
+config MTD_DC21285
+	tristate "CFI Flash device mapped on DC21285 Footbridge"
+	depends on ARM && MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
+	help
+	  This provides a driver for the flash accessed using Intel's
+	  21285 bridge used with Intel's StrongARM processors. More info at
+	  <http://www.intel.com/design/bridge/docs/21285_documentation.htm>.
+
+config MTD_IQ80310
+	tristate "CFI Flash device mapped on the XScale IQ80310 board"
+	depends on ARM && MTD_CFI && ARCH_IQ80310
+	help
+	  This enables access routines for the flash chips on the Intel XScale
+	  IQ80310 evaluation board. If you have one of these boards and would 
+	  like to use the flash chips on it, say 'Y'.
+
+config MTD_IXP4XX
+	tristate "CFI Flash device mapped on Intel IXP4xx based systems"
+	depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
+	help
+	  This enables MTD access to flash devices on platforms based 
+	  on Intel's IXP4xx family of network processors such as the
+	  IXDP425 and Coyote. If you have an IXP4xx based board and
+	  would like to use the flash chips on it, say 'Y'.
+
+config MTD_IXP2000
+	tristate "CFI Flash device mapped on Intel IXP2000 based systems"
+	depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
+	help
+	  This enables MTD access to flash devices on platforms based 
+	  on Intel's IXP2000 family of network processors such as the
+	  IXDP425 and Coyote. If you have an IXP2000 based board and
+	  would like to use the flash chips on it, say 'Y'.
+
+config MTD_EPXA10DB
+	tristate "CFI Flash device mapped on Epxa10db"
+	depends on ARM && MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
+	help
+	  This enables support for the flash devices on the Altera
+	  Excalibur XA10 Development Board. If you are building a kernel
+	  for on of these boards then you should say 'Y' otherwise say 'N'.
+
+config MTD_FORTUNET
+	tristate "CFI Flash device mapped on the FortuNet board"
+	depends on ARM && MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
+	help
+	  This enables access to the Flash on the FortuNet board.  If you
+	  have such a board, say 'Y'.
+
+config MTD_AUTCPU12
+	tristate "NV-RAM mapping AUTCPU12 board"
+	depends on ARM && ARCH_AUTCPU12
+	help
+	  This enables access to the NV-RAM on autronix autcpu12 board.
+	  If you have such a board, say 'Y'.
+
+config MTD_EDB7312
+	tristate "CFI Flash device mapped on EDB7312"
+	depends on ARM && MTD_CFI
+	help
+	  This enables access to the CFI Flash on the Cogent EDB7312 board.
+	  If you have such a board, say 'Y' here.
+
+config MTD_IMPA7
+	tristate "JEDEC Flash device mapped on impA7"
+	depends on ARM && MTD_JEDECPROBE
+	help
+	  This enables access to the NOR Flash on the impA7 board of
+	  implementa GmbH. If you have such a board, say 'Y' here.
+
+config MTD_CEIVA
+	tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
+	depends on ARM && MTD_JEDECPROBE && ARCH_CEIVA
+	help
+	  This enables access to the flash chips on the Ceiva/Polaroid
+	  PhotoMax Digital Picture Frame.
+	  If you have such a device, say 'Y'.
+
+config MTD_NOR_TOTO
+	tristate "NOR Flash device on TOTO board"
+	depends on ARM && ARCH_OMAP && OMAP_TOTO
+	help
+	  This enables access to the NOR flash on the Texas Instruments
+	  TOTO board.
+
+config MTD_H720X
+	tristate "Hynix evaluation board mappings"
+	depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
+	help
+	  This enables access to the flash chips on the Hynix evaluation boards.
+	  If you have such a board, say 'Y'.
+
+config MTD_MPC1211
+	tristate "CFI Flash device mapped on Interface MPC-1211"
+	depends on SUPERH && SH_MPC1211 && MTD_CFI
+	help
+	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
+	  If you have such a board, say 'Y'.
+
+# This needs CFI or JEDEC, depending on the cards found.
+config MTD_PCI
+	tristate "PCI MTD driver"
+	depends on MTD && PCI && MTD_COMPLEX_MAPPINGS
+	help
+	  Mapping for accessing flash devices on add-in cards like the Intel XScale
+	  IQ80310 card, and the Intel EBSA285 card in blank ROM programming mode
+	  (please see the manual for the link settings).
+
+	  If you are not sure, say N.
+
+config MTD_PCMCIA
+	tristate "PCMCIA MTD driver"
+	depends on MTD && PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN
+	help
+	  Map driver for accessing PCMCIA linear flash memory cards. These
+	  cards are usually around 4-16MiB in size. This does not include
+	  Compact Flash cards which are treated as IDE devices.
+
+config MTD_UCLINUX
+	tristate "Generic uClinux RAM/ROM filesystem support"
+	depends on MTD_PARTITIONS && !MMU
+	help
+	  Map driver to support image based filesystems for uClinux.
+
+config MTD_WRSBC8260
+	tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
+	depends on (SBC82xx || SBC8560)
+	select MTD_PARTITIONS
+	select MTD_MAP_BANK_WIDTH_4
+	select MTD_MAP_BANK_WIDTH_1
+	select MTD_CFI_I1
+	select MTD_CFI_I4
+	help
+	  Map driver for WindRiver PowerQUICC II MPC82xx board. Drives
+	  all three flash regions on CS0, CS1 and CS6 if they are configured
+	  correctly by the boot loader.
+
+config MTD_DMV182
+        tristate "Map driver for Dy-4 SVME/DMV-182 board."
+        depends on DMV182
+        select MTD_PARTITIONS
+	select MTD_MAP_BANK_WIDTH_32
+	select MTD_CFI_I8
+	select MTD_CFI_AMDSTD
+        help
+          Map driver for Dy-4 SVME/DMV-182 board.
+
+config MTD_BAST
+	tristate "Map driver for Simtec BAST (EB2410ITX)"
+	depends on ARCH_BAST
+	select MTD_PARTITIONS
+	select MTD_MAP_BANK_WIDTH_16
+	select MTD_JEDECPROBE
+	help
+	  Map driver for NOR flash on the Simtec BAST (EB2410ITX).
+
+	  Note, this driver *cannot* over-ride the WP link on the
+	  board, or currently detect the state of the link.
+
+config MTD_BAST_MAXSIZE
+	int "Maximum size for BAST flash area (MiB)"
+	depends on MTD_BAST
+	default "4"
+
+config MTD_SHARP_SL
+	bool "ROM maped on Sharp SL Series"
+	depends on MTD && ARCH_PXA
+	help
+	  This enables access to the flash chip on the Sharp SL Series of PDAs.
+
+endmenu
+
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
new file mode 100644
index 000000000000..7ffe02b85301
--- /dev/null
+++ b/drivers/mtd/maps/Makefile
@@ -0,0 +1,73 @@
+#
+# linux/drivers/maps/Makefile
+#
+# $Id: Makefile.common,v 1.23 2005/01/05 17:06:36 dwmw2 Exp $
+
+ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
+obj-$(CONFIG_MTD)		+= map_funcs.o
+endif
+
+# Chip mappings
+obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
+obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
+obj-$(CONFIG_MTD_BAST)		+= bast-flash.o
+obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
+obj-$(CONFIG_MTD_CSTM_MIPS_IXX)	+= cstm_mips_ixx.o
+obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
+obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
+obj-$(CONFIG_MTD_ELAN_104NC)	+= elan-104nc.o
+obj-$(CONFIG_MTD_EPXA10DB)	+= epxa10db-flash.o
+obj-$(CONFIG_MTD_IQ80310)	+= iq80310.o
+obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
+obj-$(CONFIG_MTD_AMD76XROM)	+= amd76xrom.o
+obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o
+obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
+obj-$(CONFIG_MTD_LUBBOCK)	+= lubbock-flash.o
+obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
+obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
+obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
+obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o 
+obj-$(CONFIG_MTD_PNC2000)	+= pnc2000.o
+obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
+obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
+obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
+obj-$(CONFIG_MTD_IPAQ)		+= ipaq-flash.o
+obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
+obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
+obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o
+obj-$(CONFIG_MTD_TS5500)	+= ts5500_flash.o
+obj-$(CONFIG_MTD_SUN_UFLASH)	+= sun_uflash.o
+obj-$(CONFIG_MTD_VMAX)		+= vmax301.o
+obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
+obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
+obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
+obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+obj-$(CONFIG_MTD_PCI)		+= pci.o
+obj-$(CONFIG_MTD_PB1XXX)	+= pb1xxx-flash.o
+obj-$(CONFIG_MTD_DB1X00)        += db1x00-flash.o
+obj-$(CONFIG_MTD_PB1550)        += pb1550-flash.o
+obj-$(CONFIG_MTD_DB1550)        += db1550-flash.o
+obj-$(CONFIG_MTD_LASAT)		+= lasat.o
+obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
+obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
+obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
+obj-$(CONFIG_MTD_FORTUNET)	+= fortunet.o
+obj-$(CONFIG_MTD_REDWOOD)	+= redwood.o
+obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
+obj-$(CONFIG_MTD_NETtel)	+= nettel.o
+obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
+obj-$(CONFIG_MTD_EBONY)		+= ebony.o
+obj-$(CONFIG_MTD_OCOTEA)	+= ocotea.o
+obj-$(CONFIG_MTD_BEECH)		+= beech-mtd.o
+obj-$(CONFIG_MTD_ARCTIC)	+= arctic-mtd.o
+obj-$(CONFIG_MTD_WALNUT)        += walnut.o
+obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
+obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
+obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o
+obj-$(CONFIG_MTD_MPC1211)	+= mpc1211.o
+obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
+obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
+obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
+obj-$(CONFIG_MTD_DMV182)	+= dmv182.o
+obj-$(CONFIG_MTD_SHARP_SL)	+= sharpsl-flash.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
new file mode 100644
index 000000000000..51e97b05304e
--- /dev/null
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -0,0 +1,332 @@
+/*
+ * amd76xrom.c
+ *
+ * Normal mappings of chips in physical memory
+ * $Id: amd76xrom.c,v 1.19 2004/11/28 09:40:39 dwmw2 Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/list.h>
+
+
+#define xstr(s) str(s)
+#define str(s) #s
+#define MOD_NAME xstr(KBUILD_BASENAME)
+
+#define ADDRESS_NAME_LEN 18
+
+#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
+
+struct amd76xrom_window {
+	void __iomem *virt;
+	unsigned long phys;
+	unsigned long size;
+	struct list_head maps;
+	struct resource rsrc;
+	struct pci_dev *pdev;
+};
+
+struct amd76xrom_map_info {
+	struct list_head list;
+	struct map_info map;
+	struct mtd_info *mtd;
+	struct resource rsrc;
+	char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+};
+
+static struct amd76xrom_window amd76xrom_window = {
+	.maps = LIST_HEAD_INIT(amd76xrom_window.maps),
+};
+
+static void amd76xrom_cleanup(struct amd76xrom_window *window)
+{
+	struct amd76xrom_map_info *map, *scratch;
+	u8 byte;
+
+	if (window->pdev) {
+		/* Disable writes through the rom window */
+		pci_read_config_byte(window->pdev, 0x40, &byte);
+		pci_write_config_byte(window->pdev, 0x40, byte & ~1);
+	}
+
+	/* Free all of the mtd devices */
+	list_for_each_entry_safe(map, scratch, &window->maps, list) {
+		if (map->rsrc.parent) {
+			release_resource(&map->rsrc);
+		}
+		del_mtd_device(map->mtd);
+		map_destroy(map->mtd);
+		list_del(&map->list);
+		kfree(map);
+	}
+	if (window->rsrc.parent) 
+		release_resource(&window->rsrc);
+
+	if (window->virt) {
+		iounmap(window->virt);
+		window->virt = NULL;
+		window->phys = 0;
+		window->size = 0;
+		window->pdev = NULL;
+	}
+}
+
+
+static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+	u8 byte;
+	struct amd76xrom_window *window = &amd76xrom_window;
+	struct amd76xrom_map_info *map = NULL;
+	unsigned long map_top;
+
+	/* Remember the pci dev I find the window in */
+	window->pdev = pdev;
+
+	/* Assume the rom window is properly setup, and find it's size */
+	pci_read_config_byte(pdev, 0x43, &byte);
+	if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) {
+		window->phys = 0xffb00000; /* 5MiB */
+	}
+	else if ((byte & (1<<7)) == (1<<7)) {
+		window->phys = 0xffc00000; /* 4MiB */
+	}
+	else {
+		window->phys = 0xffff0000; /* 64KiB */
+	}
+	window->size = 0xffffffffUL - window->phys + 1UL;
+	
+	/*
+	 * Try to reserve the window mem region.  If this fails then
+	 * it is likely due to a fragment of the window being
+	 * "reseved" by the BIOS.  In the case that the
+	 * request_mem_region() fails then once the rom size is
+	 * discovered we will try to reserve the unreserved fragment.
+	 */
+	window->rsrc.name = MOD_NAME;
+	window->rsrc.start = window->phys;
+	window->rsrc.end   = window->phys + window->size - 1;
+	window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, &window->rsrc)) {
+		window->rsrc.parent = NULL;
+		printk(KERN_ERR MOD_NAME
+			" %s(): Unable to register resource"
+			" 0x%.08lx-0x%.08lx - kernel bug?\n",
+			__func__,
+			window->rsrc.start, window->rsrc.end);
+	}
+
+#if 0
+
+	/* Enable the selected rom window */
+	pci_read_config_byte(pdev, 0x43, &byte);
+	pci_write_config_byte(pdev, 0x43, byte | rwindow->segen_bits);
+#endif
+
+	/* Enable writes through the rom window */
+	pci_read_config_byte(pdev, 0x40, &byte);
+	pci_write_config_byte(pdev, 0x40, byte | 1);
+	
+	/* FIXME handle registers 0x80 - 0x8C the bios region locks */
+
+	/* For write accesses caches are useless */
+	window->virt = ioremap_nocache(window->phys, window->size);
+	if (!window->virt) {
+		printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+			window->phys, window->size);
+		goto out;
+	}
+
+	/* Get the first address to look for an rom chip at */
+	map_top = window->phys;
+#if 1
+	/* The probe sequence run over the firmware hub lock
+	 * registers sets them to 0x7 (no access).
+	 * Probe at most the last 4M of the address space.
+	 */
+	if (map_top < 0xffc00000) {
+		map_top = 0xffc00000;
+	}
+#endif
+	/* Loop  through and look for rom chips */
+	while((map_top - 1) < 0xffffffffUL) {
+		struct cfi_private *cfi;
+		unsigned long offset;
+		int i;
+
+		if (!map) {
+			map = kmalloc(sizeof(*map), GFP_KERNEL);
+		}
+		if (!map) {
+			printk(KERN_ERR MOD_NAME ": kmalloc failed");
+			goto out;
+		}
+		memset(map, 0, sizeof(*map));
+		INIT_LIST_HEAD(&map->list);
+		map->map.name = map->map_name;
+		map->map.phys = map_top;
+		offset = map_top - window->phys;
+		map->map.virt = (void __iomem *)
+			(((unsigned long)(window->virt)) + offset);
+		map->map.size = 0xffffffffUL - map_top + 1UL;
+		/* Set the name of the map to the address I am trying */
+		sprintf(map->map_name, "%s @%08lx",
+			MOD_NAME, map->map.phys);
+
+		/* There is no generic VPP support */
+		for(map->map.bankwidth = 32; map->map.bankwidth; 
+			map->map.bankwidth >>= 1)
+		{
+			char **probe_type;
+			/* Skip bankwidths that are not supported */
+			if (!map_bankwidth_supported(map->map.bankwidth))
+				continue;
+
+			/* Setup the map methods */
+			simple_map_init(&map->map);
+
+			/* Try all of the probe methods */
+			probe_type = rom_probe_types;
+			for(; *probe_type; probe_type++) {
+				map->mtd = do_map_probe(*probe_type, &map->map);
+				if (map->mtd)
+					goto found;
+			}
+		}
+		map_top += ROM_PROBE_STEP_SIZE;
+		continue;
+	found:
+		/* Trim the size if we are larger than the map */
+		if (map->mtd->size > map->map.size) {
+			printk(KERN_WARNING MOD_NAME
+				" rom(%u) larger than window(%lu). fixing...\n",
+				map->mtd->size, map->map.size);
+			map->mtd->size = map->map.size;
+		}
+		if (window->rsrc.parent) {
+			/*
+			 * Registering the MTD device in iomem may not be possible
+			 * if there is a BIOS "reserved" and BUSY range.  If this
+			 * fails then continue anyway.
+			 */
+			map->rsrc.name  = map->map_name;
+			map->rsrc.start = map->map.phys;
+			map->rsrc.end   = map->map.phys + map->mtd->size - 1;
+			map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+			if (request_resource(&window->rsrc, &map->rsrc)) {
+				printk(KERN_ERR MOD_NAME
+					": cannot reserve MTD resource\n");
+				map->rsrc.parent = NULL;
+			}
+		}
+
+		/* Make the whole region visible in the map */
+		map->map.virt = window->virt;
+		map->map.phys = window->phys;
+		cfi = map->map.fldrv_priv;
+		for(i = 0; i < cfi->numchips; i++) {
+			cfi->chips[i].start += offset;
+		}
+		
+		/* Now that the mtd devices is complete claim and export it */
+		map->mtd->owner = THIS_MODULE;
+		if (add_mtd_device(map->mtd)) {
+			map_destroy(map->mtd);
+			map->mtd = NULL;
+			goto out;
+		}
+
+
+		/* Calculate the new value of map_top */
+		map_top += map->mtd->size;
+
+		/* File away the map structure */
+		list_add(&map->list, &window->maps);
+		map = NULL;
+	}
+
+ out:
+	/* Free any left over map structures */
+	if (map) {
+		kfree(map);
+	}
+	/* See if I have any map structures */
+	if (list_empty(&window->maps)) {
+		amd76xrom_cleanup(window);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+
+static void __devexit amd76xrom_remove_one (struct pci_dev *pdev)
+{
+	struct amd76xrom_window *window = &amd76xrom_window;
+
+	amd76xrom_cleanup(window);
+}
+
+static struct pci_device_id amd76xrom_pci_tbl[] = {
+	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410,  
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440,  
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_AMD, 0x7468 }, /* amd8111 support */
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, amd76xrom_pci_tbl);
+
+#if 0
+static struct pci_driver amd76xrom_driver = {
+	.name =		MOD_NAME,
+	.id_table =	amd76xrom_pci_tbl,
+	.probe =	amd76xrom_init_one,
+	.remove =	amd76xrom_remove_one,
+};
+#endif
+
+static int __init init_amd76xrom(void)
+{
+	struct pci_dev *pdev;
+	struct pci_device_id *id;
+	pdev = NULL;
+	for(id = amd76xrom_pci_tbl; id->vendor; id++) {
+		pdev = pci_find_device(id->vendor, id->device, NULL);
+		if (pdev) {
+			break;
+		}
+	}
+	if (pdev) {
+		return amd76xrom_init_one(pdev, &amd76xrom_pci_tbl[0]);
+	}
+	return -ENXIO;
+#if 0
+	return pci_module_init(&amd76xrom_driver);
+#endif
+}
+
+static void __exit cleanup_amd76xrom(void)
+{
+	amd76xrom_remove_one(amd76xrom_window.pdev);
+}
+
+module_init(init_amd76xrom);
+module_exit(cleanup_amd76xrom);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on the AMD76X southbridge");
+
diff --git a/drivers/mtd/maps/arctic-mtd.c b/drivers/mtd/maps/arctic-mtd.c
new file mode 100644
index 000000000000..777276fd0e15
--- /dev/null
+++ b/drivers/mtd/maps/arctic-mtd.c
@@ -0,0 +1,135 @@
+/*
+ * $Id: arctic-mtd.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ * 
+ * drivers/mtd/maps/arctic-mtd.c MTD mappings and partition tables for 
+ *                              IBM 405LP Arctic boards.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2002, International Business Machines Corporation
+ * All Rights Reserved.
+ *
+ * Bishop Brock
+ * IBM Research, Austin Center for Low-Power Computing
+ * bcbrock@us.ibm.com
+ * March 2002
+ *
+ * modified for Arctic by,
+ * David Gibson
+ * IBM OzLabs, Canberra, Australia
+ * <arctic@gibson.dropbear.id.au>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/ibm4xx.h>
+
+/*
+ * 0 : 0xFE00 0000 - 0xFEFF FFFF : Filesystem 1 (16MiB)
+ * 1 : 0xFF00 0000 - 0xFF4F FFFF : kernel (5.12MiB)
+ * 2 : 0xFF50 0000 - 0xFFF5 FFFF : Filesystem 2 (10.624MiB) (if non-XIP)
+ * 3 : 0xFFF6 0000 - 0xFFFF FFFF : PIBS Firmware (640KiB)
+ */
+
+#define FFS1_SIZE	0x01000000 /* 16MiB */
+#define KERNEL_SIZE	0x00500000 /* 5.12MiB */
+#define FFS2_SIZE	0x00a60000 /* 10.624MiB */
+#define FIRMWARE_SIZE	0x000a0000 /* 640KiB */
+
+
+#define NAME     	"Arctic Linux Flash"
+#define PADDR    	SUBZERO_BOOTFLASH_PADDR
+#define BUSWIDTH	2
+#define SIZE		SUBZERO_BOOTFLASH_SIZE
+#define PARTITIONS	4
+
+/* Flash memories on these boards are memory resources, accessed big-endian. */
+
+{
+  /* do nothing for now */
+}
+
+static struct map_info arctic_mtd_map = {
+	.name		= NAME,
+	.size		= SIZE,
+	.bankwidth	= BUSWIDTH,
+	.phys		= PADDR,
+};
+
+static struct mtd_info *arctic_mtd;
+
+static struct mtd_partition arctic_partitions[PARTITIONS] = {
+	{ .name		= "Filesystem",
+	  .size		= FFS1_SIZE,
+	  .offset	= 0,},
+        { .name		= "Kernel",
+	  .size		= KERNEL_SIZE,
+	  .offset	= FFS1_SIZE,},
+	{ .name		= "Filesystem",
+	  .size		= FFS2_SIZE,
+	  .offset	= FFS1_SIZE + KERNEL_SIZE,},
+	{ .name		= "Firmware",
+	  .size		= FIRMWARE_SIZE,
+	  .offset	= SUBZERO_BOOTFLASH_SIZE - FIRMWARE_SIZE,},
+};
+
+static int __init
+init_arctic_mtd(void)
+{
+	printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR);
+
+	arctic_mtd_map.virt = ioremap(PADDR, SIZE);
+
+	if (!arctic_mtd_map.virt) {
+		printk("%s: failed to ioremap 0x%x\n", NAME, PADDR);
+		return -EIO;
+	}
+	simple_map_init(&arctic_mtd_map);
+
+	printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8);
+	arctic_mtd = do_map_probe("cfi_probe", &arctic_mtd_map);
+
+	if (!arctic_mtd)
+		return -ENXIO;
+
+	arctic_mtd->owner = THIS_MODULE;
+
+	return add_mtd_partitions(arctic_mtd, arctic_partitions, PARTITIONS);
+}
+
+static void __exit
+cleanup_arctic_mtd(void)
+{
+	if (arctic_mtd) {
+		del_mtd_partitions(arctic_mtd);
+		map_destroy(arctic_mtd);
+		iounmap((void *) arctic_mtd_map.virt);
+	}
+}
+
+module_init(init_arctic_mtd);
+module_exit(cleanup_arctic_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Gibson <arctic@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("MTD map and partitions for IBM 405LP Arctic boards");
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
new file mode 100644
index 000000000000..cf362ccc3c8e
--- /dev/null
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -0,0 +1,127 @@
+/*
+ * NV-RAM memory access on autcpu12 
+ * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * $Id: autcpu12-nvram.c,v 1.8 2004/11/04 13:24:14 gleixner Exp $ 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <asm/hardware.h>
+#include <asm/arch/autcpu12.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+
+static struct mtd_info *sram_mtd;
+
+struct map_info autcpu12_sram_map = {
+	.name = "SRAM",
+	.size = 32768,
+	.bankwidth = 4,
+	.phys = 0x12000000,
+};
+
+static int __init init_autcpu12_sram (void)
+{
+	int err, save0, save1;
+
+	autcpu12_sram_map.virt = ioremap(0x12000000, SZ_128K);
+	if (!autcpu12_sram_map.virt) {
+		printk("Failed to ioremap autcpu12 NV-RAM space\n");
+		err = -EIO;
+		goto out;
+	}
+	simple_map_init(&autcpu_sram_map);
+
+	/* 
+	 * Check for 32K/128K 
+	 * read ofs 0 
+	 * read ofs 0x10000 
+	 * Write complement to ofs 0x100000
+	 * Read	and check result on ofs 0x0
+	 * Restore contents
+	 */
+	save0 = map_read32(&autcpu12_sram_map,0);
+	save1 = map_read32(&autcpu12_sram_map,0x10000);
+	map_write32(&autcpu12_sram_map,~save0,0x10000);
+	/* if we find this pattern on 0x0, we have 32K size 
+	 * restore contents and exit
+	 */
+	if ( map_read32(&autcpu12_sram_map,0) != save0) {
+		map_write32(&autcpu12_sram_map,save0,0x0);
+		goto map;
+	}
+	/* We have a 128K found, restore 0x10000 and set size
+	 * to 128K
+	 */
+	map_write32(&autcpu12_sram_map,save1,0x10000);
+	autcpu12_sram_map.size = SZ_128K;
+
+map:
+	sram_mtd = do_map_probe("map_ram", &autcpu12_sram_map);
+	if (!sram_mtd) {
+		printk("NV-RAM probe failed\n");
+		err = -ENXIO;
+		goto out_ioremap;
+	}
+
+	sram_mtd->owner = THIS_MODULE;
+	sram_mtd->erasesize = 16;
+	
+	if (add_mtd_device(sram_mtd)) {
+		printk("NV-RAM device addition failed\n");
+		err = -ENOMEM;
+		goto out_probe;
+	}
+
+	printk("NV-RAM device size %ldKiB registered on AUTCPU12\n",autcpu12_sram_map.size/SZ_1K);
+		
+	return 0;
+
+out_probe:
+	map_destroy(sram_mtd);
+	sram_mtd = 0;
+
+out_ioremap:
+	iounmap((void *)autcpu12_sram_map.virt);
+out:
+	return err;
+}
+
+static void __exit cleanup_autcpu12_maps(void)
+{
+	if (sram_mtd) {
+		del_mtd_device(sram_mtd);
+		map_destroy(sram_mtd);
+		iounmap((void *)autcpu12_sram_map.virt);
+	}
+}
+
+module_init(init_autcpu12_sram);
+module_exit(cleanup_autcpu12_maps);
+
+MODULE_AUTHOR("Thomas Gleixner");
+MODULE_DESCRIPTION("autcpu12 NV-RAM map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
new file mode 100644
index 000000000000..44de3a81b277
--- /dev/null
+++ b/drivers/mtd/maps/bast-flash.c
@@ -0,0 +1,227 @@
+/* linux/drivers/mtd/maps/bast_flash.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
+ *
+ * Changelog:
+ *	20-Sep-2004  BJD  Initial version
+ *
+ * $Id: bast-flash.c,v 1.1 2004/09/21 14:29:04 bjd Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-cpld.h>
+
+#ifdef CONFIG_MTD_BAST_MAXSIZE
+#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * (1024*1024))
+#else
+#define AREA_MAXSIZE (32*1024*1024)
+#endif
+
+#define PFX "bast-flash: "
+
+struct bast_flash_info {
+	struct mtd_info		*mtd;
+	struct map_info		 map;
+	struct mtd_partition	*partitions;
+	struct resource		*area;
+};
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+static struct bast_flash_info *to_bast_info(struct device *dev)
+{
+	return (struct bast_flash_info *)dev_get_drvdata(dev);
+}
+
+static void bast_flash_setrw(int to)
+{
+	unsigned int val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = __raw_readb(BAST_VA_CTRL3);
+	
+	if (to)
+		val |= BAST_CPLD_CTRL3_ROMWEN;
+	else
+		val &= ~BAST_CPLD_CTRL3_ROMWEN;
+
+	pr_debug("new cpld ctrl3=%02x\n", val);
+
+	__raw_writeb(val, BAST_VA_CTRL3);
+	local_irq_restore(flags);
+}
+
+static int bast_flash_remove(struct device *dev)
+{
+	struct bast_flash_info *info = to_bast_info(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	if (info == NULL) 
+		return 0;
+
+	if (info->map.virt != NULL)
+		iounmap(info->map.virt);
+
+	if (info->mtd) {
+		del_mtd_partitions(info->mtd);
+		map_destroy(info->mtd);
+	}
+
+	if (info->partitions)
+		kfree(info->partitions);
+
+	if (info->area) {
+		release_resource(info->area);
+		kfree(info->area);
+	}
+	
+	kfree(info);
+
+	return 0;
+}
+
+static int bast_flash_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bast_flash_info *info;
+	struct resource *res;
+	int err = 0;
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		printk(KERN_ERR PFX "no memory for flash info\n");
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	memzero(info, sizeof(*info));
+	dev_set_drvdata(dev, info);
+
+	res = pdev->resource;  /* assume that the flash has one resource */
+
+	info->map.phys = res->start;
+	info->map.size = res->end - res->start + 1;
+	info->map.name = dev->bus_id;	
+	info->map.bankwidth = 2;
+	
+	if (info->map.size > AREA_MAXSIZE)
+		info->map.size = AREA_MAXSIZE;
+
+	pr_debug("%s: area %08lx, size %ld\n", __FUNCTION__,
+		 info->map.phys, info->map.size);
+	
+	info->area = request_mem_region(res->start, info->map.size,
+					pdev->name);
+	if (info->area == NULL) {
+		printk(KERN_ERR PFX "cannot reserve flash memory region\n");
+		err = -ENOENT;
+		goto exit_error;
+	}
+
+	info->map.virt = ioremap(res->start, info->map.size);
+	pr_debug("%s: virt at %08x\n", __FUNCTION__, (int)info->map.virt);
+
+	if (info->map.virt == 0) {
+		printk(KERN_ERR PFX "failed to ioremap() region\n");
+		err = -EIO;
+		goto exit_error;
+	}
+ 
+	simple_map_init(&info->map);
+
+	/* enable the write to the flash area */
+
+	bast_flash_setrw(1);
+
+	/* probe for the device(s) */
+
+	info->mtd = do_map_probe("jedec_probe", &info->map);
+	if (info->mtd == NULL)
+		info->mtd = do_map_probe("cfi_probe", &info->map);
+
+	if (info->mtd == NULL) {
+		printk(KERN_ERR PFX "map_probe() failed\n");
+		err = -ENXIO;
+		goto exit_error;
+	}
+
+	/* mark ourselves as the owner */
+	info->mtd->owner = THIS_MODULE;
+
+	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
+	if (err > 0) {
+		err = add_mtd_partitions(info->mtd, info->partitions, err);
+		if (err) 
+			printk(KERN_ERR PFX "cannot add/parse partitions\n");
+	}
+
+	if (err == 0)
+		return 0;
+
+	/* fall through to exit error */
+
+ exit_error:
+	bast_flash_remove(dev);
+	return err;
+}
+
+static struct device_driver bast_flash_driver = {
+	.name		= "bast-nor",
+	.bus		= &platform_bus_type,
+	.probe		= bast_flash_probe,
+	.remove		= bast_flash_remove,
+};
+
+static int __init bast_flash_init(void)
+{
+	printk("BAST NOR-Flash Driver, (c) 2004 Simtec Electronics\n");
+	return driver_register(&bast_flash_driver);
+}
+
+static void __exit bast_flash_exit(void)
+{
+	driver_unregister(&bast_flash_driver);
+}
+
+module_init(bast_flash_init);
+module_exit(bast_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("BAST MTD Map driver");
diff --git a/drivers/mtd/maps/beech-mtd.c b/drivers/mtd/maps/beech-mtd.c
new file mode 100644
index 000000000000..5e79c9d5da2b
--- /dev/null
+++ b/drivers/mtd/maps/beech-mtd.c
@@ -0,0 +1,112 @@
+/*
+ * $Id: beech-mtd.c,v 1.10 2004/11/04 13:24:14 gleixner Exp $
+ * 
+ * drivers/mtd/maps/beech-mtd.c MTD mappings and partition tables for 
+ *                              IBM 405LP Beech boards.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2002, International Business Machines Corporation
+ * All Rights Reserved.
+ *
+ * Bishop Brock
+ * IBM Research, Austin Center for Low-Power Computing
+ * bcbrock@us.ibm.com
+ * March 2002
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/ibm4xx.h>
+
+#define NAME     "Beech Linux Flash"
+#define PADDR    BEECH_BIGFLASH_PADDR
+#define SIZE     BEECH_BIGFLASH_SIZE
+#define BUSWIDTH 1
+
+/* Flash memories on these boards are memory resources, accessed big-endian. */
+
+
+static struct map_info beech_mtd_map = {
+	.name =		NAME,
+	.size =		SIZE,
+	.bankwidth =	BUSWIDTH,
+	.phys =		PADDR
+};
+
+static struct mtd_info *beech_mtd;
+
+static struct mtd_partition beech_partitions[2] = {
+	{
+	      .name = "Linux Kernel",
+	      .size = BEECH_KERNEL_SIZE,
+	      .offset = BEECH_KERNEL_OFFSET
+	}, {
+	      .name = "Free Area",
+	      .size = BEECH_FREE_AREA_SIZE,
+	      .offset = BEECH_FREE_AREA_OFFSET
+	}
+};
+
+static int __init
+init_beech_mtd(void)
+{
+	printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR);
+
+	beech_mtd_map.virt = ioremap(PADDR, SIZE);
+
+	if (!beech_mtd_map.virt) {
+		printk("%s: failed to ioremap 0x%x\n", NAME, PADDR);
+		return -EIO;
+	}
+
+	simple_map_init(&beech_mtd_map);
+
+	printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8);
+	beech_mtd = do_map_probe("cfi_probe", &beech_mtd_map);
+
+	if (!beech_mtd)
+		return -ENXIO;
+
+	beech_mtd->owner = THIS_MODULE;
+
+	return add_mtd_partitions(beech_mtd, beech_partitions, 2);
+}
+
+static void __exit
+cleanup_beech_mtd(void)
+{
+	if (beech_mtd) {
+		del_mtd_partitions(beech_mtd);
+		map_destroy(beech_mtd);
+		iounmap((void *) beech_mtd_map.virt);
+	}
+}
+
+module_init(init_beech_mtd);
+module_exit(cleanup_beech_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Bishop Brock <bcbrock@us.ibm.com>");
+MODULE_DESCRIPTION("MTD map and partitions for IBM 405LP Beech boards");
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
new file mode 100644
index 000000000000..ab15dac2f936
--- /dev/null
+++ b/drivers/mtd/maps/cdb89712.c
@@ -0,0 +1,268 @@
+/*
+ * Flash on Cirrus CDB89712
+ *
+ * $Id: cdb89712.c,v 1.10 2004/11/04 13:24:14 gleixner Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+
+
+
+static struct mtd_info *flash_mtd;
+
+struct map_info cdb89712_flash_map = {
+	.name = "flash",
+	.size = FLASH_SIZE,
+	.bankwidth = FLASH_WIDTH,
+	.phys = FLASH_START,
+};
+
+struct resource cdb89712_flash_resource = {
+	.name =   "Flash",
+	.start =  FLASH_START,
+	.end =    FLASH_START + FLASH_SIZE - 1,
+	.flags =  IORESOURCE_IO | IORESOURCE_BUSY,
+};
+
+static int __init init_cdb89712_flash (void)
+{
+	int err;
+	
+	if (request_resource (&ioport_resource, &cdb89712_flash_resource)) {
+		printk(KERN_NOTICE "Failed to reserve Cdb89712 FLASH space\n");
+		err = -EBUSY;
+		goto out;
+	}
+	
+	cdb89712_flash_map.virt = ioremap(FLASH_START, FLASH_SIZE);
+	if (!cdb89712_flash_map.virt) {
+		printk(KERN_NOTICE "Failed to ioremap Cdb89712 FLASH space\n");
+		err = -EIO;
+		goto out_resource;
+	}
+	simple_map_init(&cdb89712_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &cdb89712_flash_map);
+	if (!flash_mtd) {
+		flash_mtd = do_map_probe("map_rom", &cdb89712_flash_map);
+		if (flash_mtd)
+			flash_mtd->erasesize = 0x10000;
+	}
+	if (!flash_mtd) {
+		printk("FLASH probe failed\n");
+		err = -ENXIO;
+		goto out_ioremap;
+	}
+
+	flash_mtd->owner = THIS_MODULE;
+	
+	if (add_mtd_device(flash_mtd)) {
+		printk("FLASH device addition failed\n");
+		err = -ENOMEM;
+		goto out_probe;
+	}
+		
+	return 0;
+
+out_probe:
+	map_destroy(flash_mtd);
+	flash_mtd = 0;
+out_ioremap:
+	iounmap((void *)cdb89712_flash_map.virt);
+out_resource:
+	release_resource (&cdb89712_flash_resource);
+out:
+	return err;
+}
+
+
+
+
+
+static struct mtd_info *sram_mtd;
+
+struct map_info cdb89712_sram_map = {
+	.name = "SRAM",
+	.size = SRAM_SIZE,
+	.bankwidth = SRAM_WIDTH,
+	.phys = SRAM_START,
+};
+
+struct resource cdb89712_sram_resource = {
+	.name =   "SRAM",
+	.start =  SRAM_START,
+	.end =    SRAM_START + SRAM_SIZE - 1,
+	.flags =  IORESOURCE_IO | IORESOURCE_BUSY,
+};
+
+static int __init init_cdb89712_sram (void)
+{
+	int err;
+	
+	if (request_resource (&ioport_resource, &cdb89712_sram_resource)) {
+		printk(KERN_NOTICE "Failed to reserve Cdb89712 SRAM space\n");
+		err = -EBUSY;
+		goto out;
+	}
+	
+	cdb89712_sram_map.virt = ioremap(SRAM_START, SRAM_SIZE);
+	if (!cdb89712_sram_map.virt) {
+		printk(KERN_NOTICE "Failed to ioremap Cdb89712 SRAM space\n");
+		err = -EIO;
+		goto out_resource;
+	}
+	simple_map_init(&cdb89712_sram_map);
+	sram_mtd = do_map_probe("map_ram", &cdb89712_sram_map);
+	if (!sram_mtd) {
+		printk("SRAM probe failed\n");
+		err = -ENXIO;
+		goto out_ioremap;
+	}
+
+	sram_mtd->owner = THIS_MODULE;
+	sram_mtd->erasesize = 16;
+	
+	if (add_mtd_device(sram_mtd)) {
+		printk("SRAM device addition failed\n");
+		err = -ENOMEM;
+		goto out_probe;
+	}
+		
+	return 0;
+
+out_probe:
+	map_destroy(sram_mtd);
+	sram_mtd = 0;
+out_ioremap:
+	iounmap((void *)cdb89712_sram_map.virt);
+out_resource:
+	release_resource (&cdb89712_sram_resource);
+out:
+	return err;
+}
+
+
+
+
+
+
+
+static struct mtd_info *bootrom_mtd;
+
+struct map_info cdb89712_bootrom_map = {
+	.name = "BootROM",
+	.size = BOOTROM_SIZE,
+	.bankwidth = BOOTROM_WIDTH,
+	.phys = BOOTROM_START,
+};
+
+struct resource cdb89712_bootrom_resource = {
+	.name =   "BootROM",
+	.start =  BOOTROM_START,
+	.end =    BOOTROM_START + BOOTROM_SIZE - 1,
+	.flags =  IORESOURCE_IO | IORESOURCE_BUSY,
+};
+
+static int __init init_cdb89712_bootrom (void)
+{
+	int err;
+	
+	if (request_resource (&ioport_resource, &cdb89712_bootrom_resource)) {
+		printk(KERN_NOTICE "Failed to reserve Cdb89712 BOOTROM space\n");
+		err = -EBUSY;
+		goto out;
+	}
+	
+	cdb89712_bootrom_map.virt = ioremap(BOOTROM_START, BOOTROM_SIZE);
+	if (!cdb89712_bootrom_map.virt) {
+		printk(KERN_NOTICE "Failed to ioremap Cdb89712 BootROM space\n");
+		err = -EIO;
+		goto out_resource;
+	}
+	simple_map_init(&cdb89712_bootrom_map);
+	bootrom_mtd = do_map_probe("map_rom", &cdb89712_bootrom_map);
+	if (!bootrom_mtd) {
+		printk("BootROM probe failed\n");
+		err = -ENXIO;
+		goto out_ioremap;
+	}
+
+	bootrom_mtd->owner = THIS_MODULE;
+	bootrom_mtd->erasesize = 0x10000;
+	
+	if (add_mtd_device(bootrom_mtd)) {
+		printk("BootROM device addition failed\n");
+		err = -ENOMEM;
+		goto out_probe;
+	}
+		
+	return 0;
+
+out_probe:
+	map_destroy(bootrom_mtd);
+	bootrom_mtd = 0;
+out_ioremap:
+	iounmap((void *)cdb89712_bootrom_map.virt);
+out_resource:
+	release_resource (&cdb89712_bootrom_resource);
+out:
+	return err;
+}
+
+
+
+
+
+static int __init init_cdb89712_maps(void)
+{
+
+       	printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n  Flash 0x%x at 0x%x\n  SRAM 0x%x at 0x%x\n  BootROM 0x%x at 0x%x\n", 
+	       FLASH_SIZE, FLASH_START, SRAM_SIZE, SRAM_START, BOOTROM_SIZE, BOOTROM_START);
+
+	init_cdb89712_flash();
+	init_cdb89712_sram();
+	init_cdb89712_bootrom();
+	
+	return 0;
+}
+	
+
+static void __exit cleanup_cdb89712_maps(void)
+{
+	if (sram_mtd) {
+		del_mtd_device(sram_mtd);
+		map_destroy(sram_mtd);
+		iounmap((void *)cdb89712_sram_map.virt);
+		release_resource (&cdb89712_sram_resource);
+	}
+	
+	if (flash_mtd) {
+		del_mtd_device(flash_mtd);
+		map_destroy(flash_mtd);
+		iounmap((void *)cdb89712_flash_map.virt);
+		release_resource (&cdb89712_flash_resource);
+	}
+
+	if (bootrom_mtd) {
+		del_mtd_device(bootrom_mtd);
+		map_destroy(bootrom_mtd);
+		iounmap((void *)cdb89712_bootrom_map.virt);
+		release_resource (&cdb89712_bootrom_resource);
+	}
+}
+
+module_init(init_cdb89712_maps);
+module_exit(cleanup_cdb89712_maps);
+
+MODULE_AUTHOR("Ray L");
+MODULE_DESCRIPTION("ARM CDB89712 map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
new file mode 100644
index 000000000000..da8584a662f4
--- /dev/null
+++ b/drivers/mtd/maps/ceiva.c
@@ -0,0 +1,350 @@
+/*
+ * Ceiva flash memory driver.
+ * Copyright (C) 2002 Rob Scott <rscott@mtrob.fdns.net>
+ *
+ * Note: this driver supports jedec compatible devices. Modification
+ * for CFI compatible devices should be straight forward: change
+ * jedec_probe to cfi_probe.
+ *
+ * Based on: sa1100-flash.c, which has the following copyright:
+ * Flash memory access on SA11x0 based devices
+ *
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ *
+ * $Id: ceiva.c,v 1.11 2004/09/16 23:27:12 gleixner Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+
+/*
+ * This isn't complete yet, so...
+ */
+#define CONFIG_MTD_CEIVA_STATICMAP
+
+#ifdef CONFIG_MTD_CEIVA_STATICMAP
+/*
+ * See include/linux/mtd/partitions.h for definition of the mtd_partition
+ * structure.
+ *
+ * Please note:
+ *  1. The flash size given should be the largest flash size that can
+ *     be accomodated.
+ *
+ *  2. The bus width must defined in clps_setup_flash.
+ *
+ * The MTD layer will detect flash chip aliasing and reduce the size of
+ * the map accordingly.
+ *
+ */
+
+#ifdef CONFIG_ARCH_CEIVA
+/* Flash / Partition sizing */
+/* For the 28F8003, we use the block mapping to calcuate the sizes */
+#define MAX_SIZE_KiB                  (16 + 8 + 8 + 96 + (7*128))
+#define BOOT_PARTITION_SIZE_KiB       (16)
+#define PARAMS_PARTITION_SIZE_KiB     (8)
+#define KERNEL_PARTITION_SIZE_KiB     (4*128)
+/* Use both remaing portion of first flash, and all of second flash */
+#define ROOT_PARTITION_SIZE_KiB       (3*128) + (8*128)
+
+static struct mtd_partition ceiva_partitions[] = {
+	{
+		.name = "Ceiva BOOT partition",
+		.size   = BOOT_PARTITION_SIZE_KiB*1024,
+		.offset = 0,
+
+	},{
+		.name = "Ceiva parameters partition",
+		.size   = PARAMS_PARTITION_SIZE_KiB*1024,
+		.offset = (16 + 8) * 1024,
+	},{
+		.name = "Ceiva kernel partition",
+		.size = (KERNEL_PARTITION_SIZE_KiB)*1024,
+		.offset = 0x20000,
+
+	},{
+		.name = "Ceiva root filesystem partition",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (ROOT_PARTITION_SIZE_KiB)*1024,
+	}
+};
+#endif
+
+static int __init clps_static_partitions(struct mtd_partition **parts)
+{
+	int nb_parts = 0;
+
+#ifdef CONFIG_ARCH_CEIVA
+	if (machine_is_ceiva()) {
+		*parts       = ceiva_partitions;
+		nb_parts     = ARRAY_SIZE(ceiva_partitions);
+	}
+#endif
+	return nb_parts;
+}
+#endif
+
+struct clps_info {
+	unsigned long base;
+	unsigned long size;
+	int width;
+	void *vbase;
+	struct map_info *map;
+	struct mtd_info *mtd;
+	struct resource *res;
+};
+
+#define NR_SUBMTD 4
+
+static struct clps_info info[NR_SUBMTD];
+
+static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd)
+{
+	struct mtd_info *subdev[nr];
+	struct map_info *maps;
+	int i, found = 0, ret = 0;
+
+	/*
+	 * Allocate the map_info structs in one go.
+	 */
+	maps = kmalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
+	if (!maps)
+		return -ENOMEM;
+	memset(maps, 0, sizeof(struct map_info) * nr);
+	/*
+	 * Claim and then map the memory regions.
+	 */
+	for (i = 0; i < nr; i++) {
+		if (clps[i].base == (unsigned long)-1)
+			break;
+
+		clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash");
+		if (!clps[i].res) {
+			ret = -EBUSY;
+			break;
+		}
+
+		clps[i].map = maps + i;
+
+		clps[i].map->name = "clps flash";
+		clps[i].map->phys = clps[i].base;
+
+		clps[i].vbase = ioremap(clps[i].base, clps[i].size);
+		if (!clps[i].vbase) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		clps[i].map->virt = (void __iomem *)clps[i].vbase;
+		clps[i].map->bankwidth = clps[i].width;
+		clps[i].map->size = clps[i].size;
+
+		simple_map_init(&clps[i].map);
+
+		clps[i].mtd = do_map_probe("jedec_probe", clps[i].map);
+		if (clps[i].mtd == NULL) {
+			ret = -ENXIO;
+			break;
+		}
+		clps[i].mtd->owner = THIS_MODULE;
+		subdev[i] = clps[i].mtd;
+
+		printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, "
+			"%d-bit\n", clps[i].base, clps[i].mtd->size >> 20,
+			clps[i].width * 8);
+		found += 1;
+	}
+
+	/*
+	 * ENXIO is special.  It means we didn't find a chip when
+	 * we probed.  We need to tear down the mapping, free the
+	 * resource and mark it as such.
+	 */
+	if (ret == -ENXIO) {
+		iounmap(clps[i].vbase);
+		clps[i].vbase = NULL;
+		release_resource(clps[i].res);
+		clps[i].res = NULL;
+	}
+
+	/*
+	 * If we found one device, don't bother with concat support.
+	 * If we found multiple devices, use concat if we have it
+	 * available, otherwise fail.
+	 */
+	if (ret == 0 || ret == -ENXIO) {
+		if (found == 1) {
+			*rmtd = subdev[0];
+			ret = 0;
+		} else if (found > 1) {
+			/*
+			 * We detected multiple devices.  Concatenate
+			 * them together.
+			 */
+#ifdef CONFIG_MTD_CONCAT
+			*rmtd = mtd_concat_create(subdev, found,
+						  "clps flash");
+			if (*rmtd == NULL)
+				ret = -ENXIO;
+#else
+			printk(KERN_ERR "clps flash: multiple devices "
+			       "found but MTD concat support disabled.\n");
+			ret = -ENXIO;
+#endif
+		}
+	}
+
+	/*
+	 * If we failed, clean up.
+	 */
+	if (ret) {
+		do {
+			if (clps[i].mtd)
+				map_destroy(clps[i].mtd);
+			if (clps[i].vbase)
+				iounmap(clps[i].vbase);
+			if (clps[i].res)
+				release_resource(clps[i].res);
+		} while (i--);
+
+		kfree(maps);
+	}
+
+	return ret;
+}
+
+static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd)
+{
+	int i;
+
+	del_mtd_partitions(mtd);
+
+	if (mtd != clps[0].mtd)
+		mtd_concat_destroy(mtd);
+
+	for (i = NR_SUBMTD; i >= 0; i--) {
+		if (clps[i].mtd)
+			map_destroy(clps[i].mtd);
+		if (clps[i].vbase)
+			iounmap(clps[i].vbase);
+		if (clps[i].res)
+			release_resource(clps[i].res);
+	}
+	kfree(clps[0].map);
+}
+
+/*
+ * We define the memory space, size, and width for the flash memory
+ * space here.
+ */
+
+static int __init clps_setup_flash(void)
+{
+	int nr;
+
+#ifdef CONFIG_ARCH_CEIVA
+	if (machine_is_ceiva()) {
+		info[0].base = CS0_PHYS_BASE;
+		info[0].size = SZ_32M;
+		info[0].width = CEIVA_FLASH_WIDTH;
+		info[1].base = CS1_PHYS_BASE;
+		info[1].size = SZ_32M;
+		info[1].width = CEIVA_FLASH_WIDTH;
+		nr = 2;
+	}
+#endif
+	return nr;
+}
+
+static struct mtd_partition *parsed_parts;
+static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static void __init clps_locate_partitions(struct mtd_info *mtd)
+{
+	const char *part_type = NULL;
+	int nr_parts = 0;
+	do {
+		/*
+		 * Partition selection stuff.
+		 */
+		nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0);
+		if (nr_parts > 0) {
+			part_type = "command line";
+			break;
+		}
+#ifdef CONFIG_MTD_CEIVA_STATICMAP
+		nr_parts = clps_static_partitions(&parsed_parts);
+		if (nr_parts > 0) {
+			part_type = "static";
+			break;
+		}
+		printk("found: %d partitions\n", nr_parts);
+#endif
+	} while (0);
+
+	if (nr_parts == 0) {
+		printk(KERN_NOTICE "clps flash: no partition info "
+			"available, registering whole flash\n");
+		add_mtd_device(mtd);
+	} else {
+		printk(KERN_NOTICE "clps flash: using %s partition "
+			"definition\n", part_type);
+		add_mtd_partitions(mtd, parsed_parts, nr_parts);
+	}
+
+	/* Always succeeds. */
+}
+
+static void __exit clps_destroy_partitions(void)
+{
+	if (parsed_parts)
+		kfree(parsed_parts);
+}
+
+static struct mtd_info *mymtd;
+
+static int __init clps_mtd_init(void)
+{
+	int ret;
+	int nr;
+
+	nr = clps_setup_flash();
+	if (nr < 0)
+		return nr;
+
+	ret = clps_setup_mtd(info, nr, &mymtd);
+	if (ret)
+		return ret;
+
+	clps_locate_partitions(mymtd);
+
+	return 0;
+}
+
+static void __exit clps_mtd_cleanup(void)
+{
+	clps_destroy_mtd(info, mymtd);
+	clps_destroy_partitions();
+}
+
+module_init(clps_mtd_init);
+module_exit(clps_mtd_cleanup);
+
+MODULE_AUTHOR("Rob Scott");
+MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
new file mode 100644
index 000000000000..f72e4f894b32
--- /dev/null
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -0,0 +1,139 @@
+/*
+ *  Copyright � 2001 Flaga hf. Medical Devices, K�ri Dav��sson <kd@flaga.is>
+ *
+ *  $Id: cfi_flagadm.c,v 1.14 2004/11/04 13:24:14 gleixner Exp $
+ *  
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+
+/* We split the flash chip up into four parts.
+ * 1: bootloader firts 128k			(0x00000000 - 0x0001FFFF) size 0x020000
+ * 2: kernel 640k					(0x00020000 - 0x000BFFFF) size 0x0A0000
+ * 3: compressed 1536k root ramdisk	(0x000C0000 - 0x0023FFFF) size 0x180000
+ * 4: writeable diskpartition (jffs)(0x00240000 - 0x003FFFFF) size 0x1C0000
+ */
+
+#define FLASH_PHYS_ADDR 0x40000000
+#define FLASH_SIZE 0x400000  
+
+#define FLASH_PARTITION0_ADDR 0x00000000
+#define FLASH_PARTITION0_SIZE 0x00020000
+
+#define FLASH_PARTITION1_ADDR 0x00020000
+#define FLASH_PARTITION1_SIZE 0x000A0000
+
+#define FLASH_PARTITION2_ADDR 0x000C0000
+#define FLASH_PARTITION2_SIZE 0x00180000
+
+#define FLASH_PARTITION3_ADDR 0x00240000
+#define FLASH_PARTITION3_SIZE 0x001C0000
+
+
+struct map_info flagadm_map = {
+		.name =		"FlagaDM flash device",
+		.size =		FLASH_SIZE,
+		.bankwidth =	2,
+};
+
+struct mtd_partition flagadm_parts[] = {
+	{
+		.name =		"Bootloader",
+		.offset	=	FLASH_PARTITION0_ADDR,
+		.size =		FLASH_PARTITION0_SIZE
+	},
+	{
+		.name =		"Kernel image",
+		.offset =	FLASH_PARTITION1_ADDR,
+		.size =		FLASH_PARTITION1_SIZE
+	},
+	{
+		.name =		"Initial ramdisk image",
+		.offset =	FLASH_PARTITION2_ADDR,
+		.size =		FLASH_PARTITION2_SIZE
+	},
+	{	
+		.name =		"Persistant storage",
+		.offset =	FLASH_PARTITION3_ADDR,
+		.size =		FLASH_PARTITION3_SIZE
+	}
+};
+
+#define PARTITION_COUNT (sizeof(flagadm_parts)/sizeof(struct mtd_partition))
+
+static struct mtd_info *mymtd;
+
+int __init init_flagadm(void)
+{	
+	printk(KERN_NOTICE "FlagaDM flash device: %x at %x\n",
+			FLASH_SIZE, FLASH_PHYS_ADDR);
+	
+	flagadm_map.phys = FLASH_PHYS_ADDR;
+	flagadm_map.virt = ioremap(FLASH_PHYS_ADDR,
+					FLASH_SIZE);
+
+	if (!flagadm_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+
+	simple_map_init(&flagadm_map);
+
+	mymtd = do_map_probe("cfi_probe", &flagadm_map);
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+		add_mtd_partitions(mymtd, flagadm_parts, PARTITION_COUNT);
+		printk(KERN_NOTICE "FlagaDM flash device initialized\n");
+		return 0;
+	}
+
+	iounmap((void *)flagadm_map.virt);
+	return -ENXIO;
+}
+
+static void __exit cleanup_flagadm(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+	if (flagadm_map.virt) {
+		iounmap((void *)flagadm_map.virt);
+		flagadm_map.virt = 0;
+	}
+}
+
+module_init(init_flagadm);
+module_exit(cleanup_flagadm);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("K�ri Dav��sson <kd@flaga.is>");
+MODULE_DESCRIPTION("MTD map driver for Flaga digital module");
diff --git a/drivers/mtd/maps/cstm_mips_ixx.c b/drivers/mtd/maps/cstm_mips_ixx.c
new file mode 100644
index 000000000000..ae9252fbf176
--- /dev/null
+++ b/drivers/mtd/maps/cstm_mips_ixx.c
@@ -0,0 +1,270 @@
+/*
+ * $Id: cstm_mips_ixx.c,v 1.12 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * Mapping of a custom board with both AMD CFI and JEDEC flash in partitions.
+ * Config with both CFI and JEDEC device support.
+ *
+ * Basically physmap.c with the addition of partitions and 
+ * an array of mapping info to accomodate more than one flash type per board.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
+#define CC_GCR             0xB4013818
+#define CC_GPBCR           0xB401380A
+#define CC_GPBDR           0xB4013808
+#define CC_M68K_DEVICE     1
+#define CC_M68K_FUNCTION   6
+#define CC_CONFADDR        0xB8004000
+#define CC_CONFDATA        0xB8004004
+#define CC_FC_FCR          0xB8002004
+#define CC_FC_DCR          0xB8002008
+#define CC_GPACR           0xB4013802
+#define CC_GPAICR          0xB4013804
+#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
+
+#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
+void cstm_mips_ixx_set_vpp(struct map_info *map,int vpp)
+{
+	static DEFINE_SPINLOCK(vpp_lock);
+	static int vpp_count = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpp_lock, flags);
+
+	if (vpp) {
+		if (!vpp_count++) {
+			__u16	data;
+			__u8	data1;
+			static u8 first = 1;
+		
+			// Set GPIO port B pin3 to high
+			data = *(__u16 *)(CC_GPBCR);
+			data = (data & 0xff0f) | 0x0040;
+			*(__u16 *)CC_GPBCR = data;
+			*(__u8 *)CC_GPBDR = (*(__u8*)CC_GPBDR) | 0x08;
+			if (first) {
+				first = 0;
+				/* need to have this delay for first
+				   enabling vpp after powerup */
+				udelay(40);
+			}
+		}
+	} else {
+		if (!--vpp_count) {
+			__u16	data;
+		
+			// Set GPIO port B pin3 to high
+			data = *(__u16 *)(CC_GPBCR);
+			data = (data & 0xff3f) | 0x0040;
+			*(__u16 *)CC_GPBCR = data;
+			*(__u8 *)CC_GPBDR = (*(__u8*)CC_GPBDR) & 0xf7;
+		}
+	}
+	spin_unlock_irqrestore(&vpp_lock, flags);
+}
+#endif
+
+/* board and partition description */
+
+#define MAX_PHYSMAP_PARTITIONS    8
+struct cstm_mips_ixx_info {
+	char *name;
+	unsigned long window_addr;
+	unsigned long window_size;
+	int bankwidth;
+	int num_partitions;
+};
+
+#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
+#define PHYSMAP_NUMBER  1  // number of board desc structs needed, one per contiguous flash type 
+const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] = 
+{
+    {   // 28F128J3A in 2x16 configuration
+        "big flash",     // name
+	0x08000000,      // window_addr
+	0x02000000,      // window_size
+        4,               // bankwidth
+	1,               // num_partitions
+    }
+
+};
+static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
+{   // 28F128J3A in 2x16 configuration
+	{
+		.name = "main partition ",
+		.size = 0x02000000, // 128 x 2 x 128k byte sectors
+		.offset = 0,
+	},
+},
+};
+#else /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
+#define PHYSMAP_NUMBER  1  // number of board desc structs needed, one per contiguous flash type 
+const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] = 
+{
+    {  
+        "MTD flash",                   // name
+	CONFIG_MTD_CSTM_MIPS_IXX_START,      // window_addr
+	CONFIG_MTD_CSTM_MIPS_IXX_LEN,        // window_size
+        CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH,   // bankwidth
+	1,                             // num_partitions
+    },
+
+};
+static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
+{ 
+	{
+		.name = "main partition",
+		.size =  CONFIG_MTD_CSTM_MIPS_IXX_LEN,
+		.offset = 0,
+	},
+},
+};
+#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
+
+struct map_info cstm_mips_ixx_map[PHYSMAP_NUMBER];
+
+int __init init_cstm_mips_ixx(void)
+{
+	int i;
+	int jedec;
+        struct mtd_info *mymtd;
+        struct mtd_partition *parts;
+
+	/* Initialize mapping */
+	for (i=0;i<PHYSMAP_NUMBER;i++) {
+		printk(KERN_NOTICE "cstm_mips_ixx flash device: 0x%lx at 0x%lx\n", 
+		       cstm_mips_ixx_board_desc[i].window_size, cstm_mips_ixx_board_desc[i].window_addr);
+
+
+		cstm_mips_ixx_map[i].phys = cstm_mips_ixx_board_desc[i].window_addr;
+		cstm_mips_ixx_map[i].virt = ioremap(cstm_mips_ixx_board_desc[i].window_addr, cstm_mips_ixx_board_desc[i].window_size);
+		if (!cstm_mips_ixx_map[i].virt) {
+			printk(KERN_WARNING "Failed to ioremap\n");
+			return -EIO;
+	        }
+		cstm_mips_ixx_map[i].name = cstm_mips_ixx_board_desc[i].name;
+		cstm_mips_ixx_map[i].size = cstm_mips_ixx_board_desc[i].window_size;
+		cstm_mips_ixx_map[i].bankwidth = cstm_mips_ixx_board_desc[i].bankwidth;
+#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
+                cstm_mips_ixx_map[i].set_vpp = cstm_mips_ixx_set_vpp;
+#endif
+		simple_map_init(&cstm_mips_ixx_map[i]);
+		//printk(KERN_NOTICE "cstm_mips_ixx: ioremap is %x\n",(unsigned int)(cstm_mips_ixx_map[i].virt));
+	}
+
+#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
+        setup_ITE_IVR_flash();
+#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
+
+	for (i=0;i<PHYSMAP_NUMBER;i++) {
+                parts = &cstm_mips_ixx_partitions[i][0];
+		jedec = 0;
+		mymtd = (struct mtd_info *)do_map_probe("cfi_probe", &cstm_mips_ixx_map[i]);
+		//printk(KERN_NOTICE "phymap %d cfi_probe: mymtd is %x\n",i,(unsigned int)mymtd);
+		if (!mymtd) {
+			jedec = 1;
+			mymtd = (struct mtd_info *)do_map_probe("jedec", &cstm_mips_ixx_map[i]);
+		        printk(KERN_NOTICE "cstm_mips_ixx %d jedec: mymtd is %x\n",i,(unsigned int)mymtd);
+		}
+		if (mymtd) {
+			mymtd->owner = THIS_MODULE;
+
+	                cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd;
+		        add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions);
+		}
+		else
+	           return -ENXIO;
+	}
+	return 0;
+}
+
+static void __exit cleanup_cstm_mips_ixx(void)
+{
+	int i;
+        struct mtd_info *mymtd;
+
+	for (i=0;i<PHYSMAP_NUMBER;i++) {
+	        mymtd = (struct mtd_info *)cstm_mips_ixx_map[i].map_priv_2;
+		if (mymtd) {
+			del_mtd_partitions(mymtd);
+			map_destroy(mymtd);
+		}
+		if (cstm_mips_ixx_map[i].virt) {
+			iounmap((void *)cstm_mips_ixx_map[i].virt);
+			cstm_mips_ixx_map[i].virt = 0;
+		}
+	}
+}
+#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
+void PCISetULongByOffset(__u32 DevNumber, __u32 FuncNumber, __u32 Offset, __u32 data)
+{
+	__u32	offset;
+
+	offset = ( unsigned long )( 0x80000000 | ( DevNumber << 11 ) + ( FuncNumber << 8 ) + Offset) ;
+
+	*(__u32 *)CC_CONFADDR = offset;	
+	*(__u32 *)CC_CONFDATA = data;
+}
+void setup_ITE_IVR_flash()
+{
+		__u32	size, base;
+
+		size = 0x0e000000;		// 32MiB
+		base = (0x08000000) >> 8 >>1; // Bug: we must shift one more bit
+
+		/* need to set ITE flash to 32 bits instead of default 8 */
+#ifdef CONFIG_MIPS_IVR
+		*(__u32 *)CC_FC_FCR = 0x55;
+		*(__u32 *)CC_GPACR = 0xfffc;
+#else
+		*(__u32 *)CC_FC_FCR = 0x77;
+#endif
+		/* turn bursting off */
+		*(__u32 *)CC_FC_DCR = 0x0;
+
+		/* setup for one chip 4 byte PCI access */
+		PCISetULongByOffset(CC_M68K_DEVICE, CC_M68K_FUNCTION, 0x60, size | base);
+		PCISetULongByOffset(CC_M68K_DEVICE, CC_M68K_FUNCTION, 0x64, 0x02);
+}
+#endif /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
+
+module_init(init_cstm_mips_ixx);
+module_exit(cleanup_cstm_mips_ixx);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
+MODULE_DESCRIPTION("MTD map driver for ITE 8172G and Globespan IVR boards");
diff --git a/drivers/mtd/maps/db1550-flash.c b/drivers/mtd/maps/db1550-flash.c
new file mode 100644
index 000000000000..d213888462a4
--- /dev/null
+++ b/drivers/mtd/maps/db1550-flash.c
@@ -0,0 +1,187 @@
+/*
+ * Flash memory access on Alchemy Db1550 board
+ * 
+ * $Id: db1550-flash.c,v 1.7 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * (C) 2004 Embedded Edge, LLC, based on db1550-flash.c:
+ * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
+ * 
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#ifdef 	DEBUG_RW
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)	
+#endif
+
+static unsigned long window_addr;
+static unsigned long window_size;
+
+
+static struct map_info db1550_map = {
+	.name =	"Db1550 flash",
+};
+
+static unsigned char flash_bankwidth = 4;
+
+/* 
+ * Support only 64MB NOR Flash parts
+ */
+
+#if defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER)
+#define DB1550_BOTH_BANKS
+#elif defined(CONFIG_MTD_DB1550_BOOT) && !defined(CONFIG_MTD_DB1550_USER)
+#define DB1550_BOOT_ONLY
+#elif !defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER)
+#define DB1550_USER_ONLY
+#endif
+
+#ifdef DB1550_BOTH_BANKS
+/* both banks will be used. Combine the first bank and the first 
+ * part of the second bank together into a single jffs/jffs2
+ * partition.
+ */
+static struct mtd_partition db1550_partitions[] = {
+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
+	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
+	 */
+        {
+                .name = "User FS",
+                .size =   (0x1FC00000 - 0x18000000),
+                .offset = 0x0000000
+        },{
+                .name = "yamon",
+                .size = 0x0100000,
+		.offset = MTDPART_OFS_APPEND,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "raw kernel",
+		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+#elif defined(DB1550_BOOT_ONLY)
+static struct mtd_partition db1550_partitions[] = {
+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
+	 */
+        {
+                .name = "User FS",
+                .size =   0x03c00000,
+                .offset = 0x0000000
+        },{
+                .name = "yamon",
+                .size = 0x0100000,
+		.offset = MTDPART_OFS_APPEND,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "raw kernel",
+		.size = (0x300000-0x40000), /* last 256KB is yamon env */
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+#elif defined(DB1550_USER_ONLY)
+static struct mtd_partition db1550_partitions[] = {
+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
+	 */
+        {
+                .name = "User FS",
+                .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
+                .offset = 0x0000000
+        },{
+                .name = "raw kernel",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+#else
+#error MTD_DB1550 define combo error /* should never happen */
+#endif
+
+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_info *mymtd;
+
+/*
+ * Probe the flash density and setup window address and size
+ * based on user CONFIG options. There are times when we don't
+ * want the MTD driver to be probing the boot or user flash,
+ * so having the option to enable only one bank is important.
+ */
+int setup_flash_params(void)
+{
+#if defined(DB1550_BOTH_BANKS)
+			window_addr = 0x18000000;
+			window_size = 0x8000000; 
+#elif defined(DB1550_BOOT_ONLY)
+			window_addr = 0x1C000000;
+			window_size = 0x4000000; 
+#else /* USER ONLY */
+			window_addr = 0x18000000;
+			window_size = 0x4000000; 
+#endif
+	return 0;
+}
+
+int __init db1550_mtd_init(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	
+	/* Default flash bankwidth */
+	db1550_map.bankwidth = flash_bankwidth;
+
+	if (setup_flash_params()) 
+		return -ENXIO;
+
+	/*
+	 * Static partition definition selection
+	 */
+	parts = db1550_partitions;
+	nb_parts = NB_OF(db1550_partitions);
+	db1550_map.size = window_size;
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	printk(KERN_NOTICE "Db1550 flash: probing %d-bit flash bus\n", 
+			db1550_map.bankwidth*8);
+	db1550_map.virt = ioremap(window_addr, window_size);
+	mymtd = do_map_probe("cfi_probe", &db1550_map);
+	if (!mymtd) return -ENXIO;
+	mymtd->owner = THIS_MODULE;
+
+	add_mtd_partitions(mymtd, parts, nb_parts);
+	return 0;
+}
+
+static void __exit db1550_mtd_cleanup(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+		iounmap((void *) db1550_map.virt);
+	}
+}
+
+module_init(db1550_mtd_init);
+module_exit(db1550_mtd_cleanup);
+
+MODULE_AUTHOR("Embedded Edge, LLC");
+MODULE_DESCRIPTION("Db1550 mtd map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/db1x00-flash.c b/drivers/mtd/maps/db1x00-flash.c
new file mode 100644
index 000000000000..faa68ec56902
--- /dev/null
+++ b/drivers/mtd/maps/db1x00-flash.c
@@ -0,0 +1,226 @@
+/*
+ * Flash memory access on Alchemy Db1xxx boards
+ * 
+ * $Id: db1x00-flash.c,v 1.6 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * (C) 2003 Pete Popov <ppopov@embeddedalley.com>
+ * 
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#ifdef 	DEBUG_RW
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)	
+#endif
+
+/* MTD CONFIG OPTIONS */
+#if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
+#define DB1X00_BOTH_BANKS
+#elif defined(CONFIG_MTD_DB1X00_BOOT) && !defined(CONFIG_MTD_DB1X00_USER)
+#define DB1X00_BOOT_ONLY
+#elif !defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
+#define DB1X00_USER_ONLY
+#endif
+
+static unsigned long window_addr;
+static unsigned long window_size;
+static unsigned long flash_size;
+
+static unsigned short *bcsr = (unsigned short *)0xAE000000;
+static unsigned char flash_bankwidth = 4;
+
+/* 
+ * The Db1x boards support different flash densities. We setup
+ * the mtd_partition structures below for default of 64Mbit 
+ * flash densities, and override the partitions sizes, if
+ * necessary, after we check the board status register.
+ */
+
+#ifdef DB1X00_BOTH_BANKS
+/* both banks will be used. Combine the first bank and the first 
+ * part of the second bank together into a single jffs/jffs2
+ * partition.
+ */
+static struct mtd_partition db1x00_partitions[] = {
+        {
+                .name         =  "User FS",
+                .size         =  0x1c00000,
+                .offset       =  0x0000000
+        },{
+                .name         =  "yamon",
+                .size         =  0x0100000,
+		.offset       =  MTDPART_OFS_APPEND,
+                .mask_flags   =  MTD_WRITEABLE
+        },{
+                .name         =  "raw kernel",
+		.size         =  (0x300000-0x40000), /* last 256KB is env */
+		.offset       =  MTDPART_OFS_APPEND,
+        }
+};
+#elif defined(DB1X00_BOOT_ONLY)
+static struct mtd_partition db1x00_partitions[] = {
+        {
+                .name         =  "User FS",
+                .size         =  0x00c00000,
+                .offset       =  0x0000000
+        },{
+                .name         =  "yamon",
+                .size         =  0x0100000,
+		.offset       =  MTDPART_OFS_APPEND,
+                .mask_flags   =  MTD_WRITEABLE
+        },{
+                .name         =  "raw kernel",
+		.size         =  (0x300000-0x40000), /* last 256KB is env */
+		.offset       =  MTDPART_OFS_APPEND,
+        }
+};
+#elif defined(DB1X00_USER_ONLY)
+static struct mtd_partition db1x00_partitions[] = {
+        {
+                .name         =  "User FS",
+                .size         =  0x0e00000,
+                .offset       =  0x0000000
+        },{
+                .name         =  "raw kernel",
+		.size         =  MTDPART_SIZ_FULL,
+		.offset       =  MTDPART_OFS_APPEND,
+        }
+};
+#else
+#error MTD_DB1X00 define combo error /* should never happen */
+#endif
+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
+
+#define NAME     	"Db1x00 Linux Flash"
+
+static struct map_info db1xxx_mtd_map = {
+	.name		= NAME,
+};
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *db1xxx_mtd;
+
+/*
+ * Probe the flash density and setup window address and size
+ * based on user CONFIG options. There are times when we don't
+ * want the MTD driver to be probing the boot or user flash,
+ * so having the option to enable only one bank is important.
+ */
+int setup_flash_params(void)
+{
+	switch ((bcsr[2] >> 14) & 0x3) {
+		case 0: /* 64Mbit devices */
+			flash_size = 0x800000; /* 8MB per part */
+#if defined(DB1X00_BOTH_BANKS)
+			window_addr = 0x1E000000;
+			window_size = 0x2000000; 
+#elif defined(DB1X00_BOOT_ONLY)
+			window_addr = 0x1F000000;
+			window_size = 0x1000000; 
+#else /* USER ONLY */
+			window_addr = 0x1E000000;
+			window_size = 0x1000000; 
+#endif
+			break;
+		case 1:
+			/* 128 Mbit devices */
+			flash_size = 0x1000000; /* 16MB per part */
+#if defined(DB1X00_BOTH_BANKS)
+			window_addr = 0x1C000000;
+			window_size = 0x4000000;
+			/* USERFS from 0x1C00 0000 to 0x1FC0 0000 */
+			db1x00_partitions[0].size = 0x3C00000;
+#elif defined(DB1X00_BOOT_ONLY)
+			window_addr = 0x1E000000;
+			window_size = 0x2000000;
+			/* USERFS from 0x1E00 0000 to 0x1FC0 0000 */
+			db1x00_partitions[0].size = 0x1C00000;
+#else /* USER ONLY */
+			window_addr = 0x1C000000;
+			window_size = 0x2000000;
+			/* USERFS from 0x1C00 0000 to 0x1DE00000 */
+			db1x00_partitions[0].size = 0x1DE0000;
+#endif
+			break;
+		case 2:
+			/* 256 Mbit devices */
+			flash_size = 0x4000000; /* 64MB per part */
+#if defined(DB1X00_BOTH_BANKS)
+			return 1;
+#elif defined(DB1X00_BOOT_ONLY)
+			/* Boot ROM flash bank only; no user bank */
+			window_addr = 0x1C000000;
+			window_size = 0x4000000;
+			/* USERFS from 0x1C00 0000 to 0x1FC00000 */
+			db1x00_partitions[0].size = 0x3C00000;
+#else /* USER ONLY */
+			return 1;
+#endif
+			break;
+		default:
+			return 1;
+	}
+	db1xxx_mtd_map.size = window_size;
+	db1xxx_mtd_map.bankwidth = flash_bankwidth;
+	db1xxx_mtd_map.phys = window_addr;
+	db1xxx_mtd_map.bankwidth = flash_bankwidth;
+	return 0;
+}
+
+int __init db1x00_mtd_init(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	
+	if (setup_flash_params()) 
+		return -ENXIO;
+
+	/*
+	 * Static partition definition selection
+	 */
+	parts = db1x00_partitions;
+	nb_parts = NB_OF(db1x00_partitions);
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", 
+			db1xxx_mtd_map.bankwidth*8);
+	db1xxx_mtd_map.virt = ioremap(window_addr, window_size);
+	db1xxx_mtd = do_map_probe("cfi_probe", &db1xxx_mtd_map);
+	if (!db1xxx_mtd) return -ENXIO;
+	db1xxx_mtd->owner = THIS_MODULE;
+
+	add_mtd_partitions(db1xxx_mtd, parts, nb_parts);
+	return 0;
+}
+
+static void __exit db1x00_mtd_cleanup(void)
+{
+	if (db1xxx_mtd) {
+		del_mtd_partitions(db1xxx_mtd);
+		map_destroy(db1xxx_mtd);
+		if (parsed_parts)
+			kfree(parsed_parts);
+	}
+}
+
+module_init(db1x00_mtd_init);
+module_exit(db1x00_mtd_cleanup);
+
+MODULE_AUTHOR("Pete Popov");
+MODULE_DESCRIPTION("Db1x00 mtd map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
new file mode 100644
index 000000000000..d850a27a4b59
--- /dev/null
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -0,0 +1,126 @@
+/*
+ * $Id: dbox2-flash.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * D-Box 2 flash driver
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+
+/* partition_info gives details on the logical partitions that the split the
+ * single flash device into. If the size if zero we use up to the end of the
+ * device. */
+static struct mtd_partition partition_info[]= {
+	{
+	.name		= "BR bootloader",
+	.size		= 128 * 1024, 
+	.offset		= 0,                  
+	.mask_flags	= MTD_WRITEABLE
+	},
+	{
+	.name		= "FLFS (U-Boot)",
+	.size		= 128 * 1024, 
+	.offset		= MTDPART_OFS_APPEND, 
+	.mask_flags	= 0
+	},
+	{
+	.name		= "Root (SquashFS)",	
+	.size		= 7040 * 1024, 
+	.offset		= MTDPART_OFS_APPEND, 
+	.mask_flags	= 0
+	},
+	{
+	.name		= "var (JFFS2)",
+	.size		= 896 * 1024, 
+	.offset		= MTDPART_OFS_APPEND, 
+	.mask_flags	= 0
+	},
+	{
+	.name		= "Flash without bootloader",	
+	.size		= MTDPART_SIZ_FULL, 
+	.offset		= 128 * 1024, 
+	.mask_flags	= 0
+	},
+	{
+	.name		= "Complete Flash",	
+	.size		= MTDPART_SIZ_FULL, 
+	.offset		= 0, 
+	.mask_flags	= MTD_WRITEABLE
+	}
+};
+
+#define NUM_PARTITIONS (sizeof(partition_info) / sizeof(partition_info[0]))
+
+#define WINDOW_ADDR 0x10000000
+#define WINDOW_SIZE 0x800000
+
+static struct mtd_info *mymtd;
+
+
+struct map_info dbox2_flash_map = {
+	.name		= "D-Box 2 flash memory",
+	.size		= WINDOW_SIZE,
+	.bankwidth	= 4,
+	.phys		= WINDOW_ADDR,
+};
+
+int __init init_dbox2_flash(void)
+{
+       	printk(KERN_NOTICE "D-Box 2 flash driver (size->0x%X mem->0x%X)\n", WINDOW_SIZE, WINDOW_ADDR);
+	dbox2_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
+
+	if (!dbox2_flash_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	simple_map_init(&dbox2_flash_map);
+
+	// Probe for dual Intel 28F320 or dual AMD
+	mymtd = do_map_probe("cfi_probe", &dbox2_flash_map);
+	if (!mymtd) {
+	    // Probe for single Intel 28F640
+	    dbox2_flash_map.bankwidth = 2;
+	
+	    mymtd = do_map_probe("cfi_probe", &dbox2_flash_map);
+	}
+	    
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+
+                /* Create MTD devices for each partition. */
+	        add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
+		
+		return 0;
+	}
+
+	iounmap((void *)dbox2_flash_map.virt);
+	return -ENXIO;
+}
+
+static void __exit cleanup_dbox2_flash(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+	if (dbox2_flash_map.virt) {
+		iounmap((void *)dbox2_flash_map.virt);
+		dbox2_flash_map.virt = 0;
+	}
+}
+
+module_init(init_dbox2_flash);
+module_exit(cleanup_dbox2_flash);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("K�ri Dav��sson <kd@flaga.is>, Bastian Blank <waldi@tuxbox.org>, Alexander Wild <wild@te-elektronik.com>");
+MODULE_DESCRIPTION("MTD map driver for D-Box 2 board");
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
new file mode 100644
index 000000000000..938c41f2f056
--- /dev/null
+++ b/drivers/mtd/maps/dc21285.c
@@ -0,0 +1,253 @@
+/*
+ * MTD map driver for flash on the DC21285 (the StrongARM-110 companion chip)
+ *
+ * (C) 2000  Nicolas Pitre <nico@cam.org>
+ *
+ * This code is GPL
+ * 
+ * $Id: dc21285.c,v 1.22 2004/11/01 13:39:21 rmk Exp $
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/hardware/dec21285.h>
+#include <asm/mach-types.h>
+
+
+static struct mtd_info *dc21285_mtd;
+
+#ifdef CONFIG_ARCH_NETWINDER
+/* 
+ * This is really ugly, but it seams to be the only
+ * realiable way to do it, as the cpld state machine 
+ * is unpredictible. So we have a 25us penalty per
+ * write access.
+ */
+static void nw_en_write(void)
+{
+	extern spinlock_t gpio_lock;
+	unsigned long flags;
+
+	/*
+	 * we want to write a bit pattern XXX1 to Xilinx to enable
+	 * the write gate, which will be open for about the next 2ms.
+	 */
+	spin_lock_irqsave(&gpio_lock, flags);
+	cpld_modify(1, 1);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	/*
+	 * let the ISA bus to catch on...
+	 */
+	udelay(25);
+}
+#else
+#define nw_en_write() do { } while (0)
+#endif
+
+static map_word dc21285_read8(struct map_info *map, unsigned long ofs)
+{
+	map_word val;
+	val.x[0] = *(uint8_t*)(map->virt + ofs);
+	return val;
+}
+
+static map_word dc21285_read16(struct map_info *map, unsigned long ofs)
+{
+	map_word val;
+	val.x[0] = *(uint16_t*)(map->virt + ofs);
+	return val;
+}
+
+static map_word dc21285_read32(struct map_info *map, unsigned long ofs)
+{
+	map_word val;
+	val.x[0] = *(uint32_t*)(map->virt + ofs);
+	return val;
+}
+
+static void dc21285_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	memcpy(to, (void*)(map->virt + from), len);
+}
+
+static void dc21285_write8(struct map_info *map, const map_word d, unsigned long adr)
+{
+	if (machine_is_netwinder())
+		nw_en_write();
+	*CSR_ROMWRITEREG = adr & 3;
+	adr &= ~3;
+	*(uint8_t*)(map->virt + adr) = d.x[0];
+}
+
+static void dc21285_write16(struct map_info *map, const map_word d, unsigned long adr)
+{
+	if (machine_is_netwinder())
+		nw_en_write();
+	*CSR_ROMWRITEREG = adr & 3;
+	adr &= ~3;
+	*(uint16_t*)(map->virt + adr) = d.x[0];
+}
+
+static void dc21285_write32(struct map_info *map, const map_word d, unsigned long adr)
+{
+	if (machine_is_netwinder())
+		nw_en_write();
+	*(uint32_t*)(map->virt + adr) = d.x[0];
+}
+
+static void dc21285_copy_to_32(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	while (len > 0) {
+		map_word d;
+		d.x[0] = *((uint32_t*)from)++;
+		dc21285_write32(map, d, to);
+		to += 4;
+		len -= 4;
+	}
+}
+
+static void dc21285_copy_to_16(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	while (len > 0) {
+		map_word d;
+		d.x[0] = *((uint16_t*)from)++;
+		dc21285_write16(map, d, to);
+		to += 2;
+		len -= 2;
+	}
+}
+
+static void dc21285_copy_to_8(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	map_word d;
+	d.x[0] = *((uint8_t*)from)++;
+	dc21285_write8(map, d, to);
+	to++;
+	len--;
+}
+
+static struct map_info dc21285_map = {
+	.name = "DC21285 flash",
+	.phys = NO_XIP,
+	.size = 16*1024*1024,
+	.copy_from = dc21285_copy_from,
+};
+
+
+/* Partition stuff */
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition *dc21285_parts;
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+#endif
+  
+static int __init init_dc21285(void)
+{
+
+#ifdef CONFIG_MTD_PARTITIONS
+	int nrparts;
+#endif
+
+	/* Determine bankwidth */
+	switch (*CSR_SA110_CNTL & (3<<14)) {
+		case SA110_CNTL_ROMWIDTH_8: 
+			dc21285_map.bankwidth = 1;
+			dc21285_map.read = dc21285_read8;
+			dc21285_map.write = dc21285_write8;
+			dc21285_map.copy_to = dc21285_copy_to_8;
+			break;
+		case SA110_CNTL_ROMWIDTH_16: 
+			dc21285_map.bankwidth = 2; 
+			dc21285_map.read = dc21285_read16;
+			dc21285_map.write = dc21285_write16;
+			dc21285_map.copy_to = dc21285_copy_to_16;
+			break;
+		case SA110_CNTL_ROMWIDTH_32: 
+			dc21285_map.bankwidth = 4; 
+			dc21285_map.read = dc21285_read32;
+			dc21285_map.write = dc21285_write32;
+			dc21285_map.copy_to = dc21285_copy_to_32;
+			break;
+		default:
+			printk (KERN_ERR "DC21285 flash: undefined bankwidth\n");
+			return -ENXIO;
+	}
+	printk (KERN_NOTICE "DC21285 flash support (%d-bit bankwidth)\n",
+		dc21285_map.bankwidth*8);
+
+	/* Let's map the flash area */
+	dc21285_map.virt = ioremap(DC21285_FLASH, 16*1024*1024);
+	if (!dc21285_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+
+	if (machine_is_ebsa285()) {
+		dc21285_mtd = do_map_probe("cfi_probe", &dc21285_map);
+	} else {
+		dc21285_mtd = do_map_probe("jedec_probe", &dc21285_map);
+	}
+
+	if (!dc21285_mtd) {
+		iounmap(dc21285_map.virt);
+		return -ENXIO;
+	}	
+	
+	dc21285_mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0);
+	if (nrparts > 0)
+		add_mtd_partitions(dc21285_mtd, dc21285_parts, nrparts);
+	else	
+#endif	
+		add_mtd_device(dc21285_mtd);
+			
+	if(machine_is_ebsa285()) {
+		/* 
+		 * Flash timing is determined with bits 19-16 of the
+		 * CSR_SA110_CNTL.  The value is the number of wait cycles, or
+		 * 0 for 16 cycles (the default).  Cycles are 20 ns.
+		 * Here we use 7 for 140 ns flash chips.
+		 */
+		/* access time */
+		*CSR_SA110_CNTL = ((*CSR_SA110_CNTL & ~0x000f0000) | (7 << 16));
+		/* burst time */
+		*CSR_SA110_CNTL = ((*CSR_SA110_CNTL & ~0x00f00000) | (7 << 20));
+		/* tristate time */
+		*CSR_SA110_CNTL = ((*CSR_SA110_CNTL & ~0x0f000000) | (7 << 24));
+	}
+	
+	return 0;
+}
+
+static void __exit cleanup_dc21285(void)
+{
+#ifdef CONFIG_MTD_PARTITIONS
+	if (dc21285_parts) {
+		del_mtd_partitions(dc21285_mtd);
+		kfree(dc21285_parts);
+	} else
+#endif
+		del_mtd_device(dc21285_mtd);
+
+	map_destroy(dc21285_mtd);
+	iounmap(dc21285_map.virt);
+}
+
+module_init(init_dc21285);
+module_exit(cleanup_dc21285);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_DESCRIPTION("MTD map driver for DC21285 boards");
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
new file mode 100644
index 000000000000..0bc79c93a584
--- /dev/null
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -0,0 +1,495 @@
+/* dilnetpc.c -- MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP"
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * $Id: dilnetpc.c,v 1.17 2004/11/28 09:40:39 dwmw2 Exp $
+ *
+ * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
+ * featuring the AMD Elan SC410 processor. There are two variants of this
+ * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
+ * ROM (Intel 28F016S3) and 8 megs of DRAM, the ADNP version has 4 megs
+ * flash and 16 megs of RAM.
+ * For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm
+ * and http://www.ssv-embedded.de/ssv/pc104/p170.htm
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
+
+/*
+** The DIL/NetPC keeps its BIOS in two distinct flash blocks.
+** Destroying any of these blocks transforms the DNPC into
+** a paperweight (albeit not a very useful one, considering
+** it only weighs a few grams).
+**
+** Therefore, the BIOS blocks must never be erased or written to
+** except by people who know exactly what they are doing (e.g.
+** to install a BIOS update). These partitions are marked read-only
+** by default, but can be made read/write by undefining
+** DNPC_BIOS_BLOCKS_WRITEPROTECTED:
+*/
+#define DNPC_BIOS_BLOCKS_WRITEPROTECTED
+
+/*
+** The ID string (in ROM) is checked to determine whether we
+** are running on a DNP/1486 or ADNP/1486
+*/
+#define BIOSID_BASE	0x000fe100
+
+#define ID_DNPC	"DNP1486"
+#define ID_ADNP	"ADNP1486"
+
+/*
+** Address where the flash should appear in CPU space
+*/
+#define FLASH_BASE	0x2000000
+
+/*
+** Chip Setup and Control (CSC) indexed register space
+*/
+#define CSC_INDEX	0x22
+#define CSC_DATA	0x23
+
+#define CSC_MMSWAR	0x30	/* MMS window C-F attributes register */
+#define CSC_MMSWDSR	0x31	/* MMS window C-F device select register */
+
+#define CSC_RBWR	0xa7	/* GPIO Read-Back/Write Register B */
+
+#define CSC_CR		0xd0	/* internal I/O device disable/Echo */
+				/* Z-bus/configuration register */
+
+#define CSC_PCCMDCR	0xf1	/* PC card mode and DMA control register */
+
+
+/*
+** PC Card indexed register space:
+*/
+
+#define PCC_INDEX	0x3e0
+#define PCC_DATA	0x3e1
+
+#define PCC_AWER_B		0x46	/* Socket B Address Window enable register */
+#define PCC_MWSAR_1_Lo	0x58	/* memory window 1 start address low register */
+#define PCC_MWSAR_1_Hi	0x59	/* memory window 1 start address high register */
+#define PCC_MWEAR_1_Lo	0x5A	/* memory window 1 stop address low register */
+#define PCC_MWEAR_1_Hi	0x5B	/* memory window 1 stop address high register */
+#define PCC_MWAOR_1_Lo	0x5C	/* memory window 1 address offset low register */
+#define PCC_MWAOR_1_Hi	0x5D	/* memory window 1 address offset high register */
+
+
+/*
+** Access to SC4x0's Chip Setup and Control (CSC)
+** and PC Card (PCC) indexed registers:
+*/
+static inline void setcsc(int reg, unsigned char data)
+{
+	outb(reg, CSC_INDEX);
+	outb(data, CSC_DATA);
+}
+
+static inline unsigned char getcsc(int reg)
+{
+	outb(reg, CSC_INDEX);
+	return(inb(CSC_DATA));
+}
+
+static inline void setpcc(int reg, unsigned char data)
+{
+	outb(reg, PCC_INDEX);
+	outb(data, PCC_DATA);
+}
+
+static inline unsigned char getpcc(int reg)
+{
+	outb(reg, PCC_INDEX);
+	return(inb(PCC_DATA));
+}
+
+
+/*
+************************************************************
+** Enable access to DIL/NetPC's flash by mapping it into
+** the SC4x0's MMS Window C.
+************************************************************
+*/
+static void dnpc_map_flash(unsigned long flash_base, unsigned long flash_size)
+{
+	unsigned long flash_end = flash_base + flash_size - 1;
+
+	/*
+	** enable setup of MMS windows C-F:
+	*/
+	/* - enable PC Card indexed register space */
+	setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);
+	/* - set PC Card controller to operate in standard mode */
+	setcsc(CSC_PCCMDCR, getcsc(CSC_PCCMDCR) & ~1);
+
+	/*
+	** Program base address and end address of window
+	** where the flash ROM should appear in CPU address space
+	*/
+	setpcc(PCC_MWSAR_1_Lo, (flash_base >> 12) & 0xff);
+	setpcc(PCC_MWSAR_1_Hi, (flash_base >> 20) & 0x3f);
+	setpcc(PCC_MWEAR_1_Lo, (flash_end >> 12) & 0xff);
+	setpcc(PCC_MWEAR_1_Hi, (flash_end >> 20) & 0x3f);
+
+	/* program offset of first flash location to appear in this window (0) */
+	setpcc(PCC_MWAOR_1_Lo, ((0 - flash_base) >> 12) & 0xff);
+	setpcc(PCC_MWAOR_1_Hi, ((0 - flash_base)>> 20) & 0x3f);
+
+	/* set attributes for MMS window C: non-cacheable, write-enabled */
+	setcsc(CSC_MMSWAR, getcsc(CSC_MMSWAR) & ~0x11);
+
+	/* select physical device ROMCS0 (i.e. flash) for MMS Window C */
+	setcsc(CSC_MMSWDSR, getcsc(CSC_MMSWDSR) & ~0x03);
+
+	/* enable memory window 1 */
+	setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) | 0x02);
+
+	/* now disable PC Card indexed register space again */
+	setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
+}
+
+
+/*
+************************************************************
+** Disable access to DIL/NetPC's flash by mapping it into
+** the SC4x0's MMS Window C.
+************************************************************
+*/
+static void dnpc_unmap_flash(void)
+{
+	/* - enable PC Card indexed register space */
+	setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);
+
+	/* disable memory window 1 */
+	setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) & ~0x02);
+
+	/* now disable PC Card indexed register space again */
+	setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
+}
+
+
+
+/*
+************************************************************
+** Enable/Disable VPP to write to flash
+************************************************************
+*/
+
+static DEFINE_SPINLOCK(dnpc_spin);
+static int        vpp_counter = 0;
+/*
+** This is what has to be done for the DNP board ..
+*/
+static void dnp_set_vpp(struct map_info *not_used, int on)
+{
+	spin_lock_irq(&dnpc_spin);
+
+	if (on)
+	{
+		if(++vpp_counter == 1)
+			setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x4);
+	}
+	else
+	{
+		if(--vpp_counter == 0)
+			setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x4);
+		else if(vpp_counter < 0)
+			BUG();
+	}
+	spin_unlock_irq(&dnpc_spin);
+}
+
+/*
+** .. and this the ADNP version:
+*/
+static void adnp_set_vpp(struct map_info *not_used, int on)
+{
+	spin_lock_irq(&dnpc_spin);
+
+	if (on)
+	{
+		if(++vpp_counter == 1)
+			setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x8);
+	}
+	else
+	{
+		if(--vpp_counter == 0)
+			setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x8);
+		else if(vpp_counter < 0)
+			BUG();
+	}
+	spin_unlock_irq(&dnpc_spin);
+}
+
+
+
+#define DNP_WINDOW_SIZE		0x00200000	/*  DNP flash size is 2MiB  */
+#define ADNP_WINDOW_SIZE	0x00400000	/* ADNP flash size is 4MiB */
+#define WINDOW_ADDR		FLASH_BASE
+
+static struct map_info dnpc_map = {
+	.name = "ADNP Flash Bank",
+	.size = ADNP_WINDOW_SIZE,
+	.bankwidth = 1,
+	.set_vpp = adnp_set_vpp,
+	.phys = WINDOW_ADDR
+};
+
+/*
+** The layout of the flash is somewhat "strange":
+**
+** 1.  960 KiB (15 blocks) : Space for ROM Bootloader and user data
+** 2.   64 KiB (1 block)   : System BIOS
+** 3.  960 KiB (15 blocks) : User Data (DNP model) or
+** 3. 3008 KiB (47 blocks) : User Data (ADNP model)
+** 4.   64 KiB (1 block)   : System BIOS Entry
+*/
+
+static struct mtd_partition partition_info[]=
+{
+	{ 
+		.name =		"ADNP boot", 
+		.offset =	0, 
+		.size =		0xf0000,
+	},
+	{ 
+		.name =		"ADNP system BIOS", 
+		.offset =	MTDPART_OFS_NXTBLK,
+		.size =		0x10000,
+#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
+		.mask_flags =	MTD_WRITEABLE,
+#endif
+	},
+	{
+		.name =		"ADNP file system",
+		.offset =	MTDPART_OFS_NXTBLK,
+		.size =		0x2f0000,
+	},
+	{
+		.name =		"ADNP system BIOS entry", 
+		.offset =	MTDPART_OFS_NXTBLK,
+		.size =		MTDPART_SIZ_FULL,
+#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
+		.mask_flags =	MTD_WRITEABLE,
+#endif
+	},
+};
+
+#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+
+static struct mtd_info *mymtd;
+static struct mtd_info *lowlvl_parts[NUM_PARTITIONS];
+static struct mtd_info *merged_mtd;
+
+/*
+** "Highlevel" partition info:
+**
+** Using the MTD concat layer, we can re-arrange partitions to our
+** liking: we construct a virtual MTD device by concatenating the
+** partitions, specifying the sequence such that the boot block
+** is immediately followed by the filesystem block (i.e. the stupid
+** system BIOS block is mapped to a different place). When re-partitioning
+** this concatenated MTD device, we can set the boot block size to
+** an arbitrary (though erase block aligned) value i.e. not one that
+** is dictated by the flash's physical layout. We can thus set the
+** boot block to be e.g. 64 KB (which is fully sufficient if we want
+** to boot an etherboot image) or to -say- 1.5 MB if we want to boot
+** a large kernel image. In all cases, the remainder of the flash
+** is available as file system space.
+*/
+
+static struct mtd_partition higlvl_partition_info[]=
+{
+	{ 
+		.name =		"ADNP boot block", 
+		.offset =	0, 
+		.size =		CONFIG_MTD_DILNETPC_BOOTSIZE,
+	},
+	{
+		.name =		"ADNP file system space",
+		.offset =	MTDPART_OFS_NXTBLK,
+		.size =		ADNP_WINDOW_SIZE-CONFIG_MTD_DILNETPC_BOOTSIZE-0x20000,
+	},
+	{ 
+		.name =		"ADNP system BIOS + BIOS Entry", 
+		.offset =	MTDPART_OFS_NXTBLK,
+		.size =		MTDPART_SIZ_FULL,
+#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
+		.mask_flags =	MTD_WRITEABLE,
+#endif
+	},
+};
+
+#define NUM_HIGHLVL_PARTITIONS (sizeof(higlvl_partition_info)/sizeof(partition_info[0]))
+
+
+static int dnp_adnp_probe(void)
+{
+	char *biosid, rc = -1;
+
+	biosid = (char*)ioremap(BIOSID_BASE, 16);
+	if(biosid)
+	{
+		if(!strcmp(biosid, ID_DNPC))
+			rc = 1;		/* this is a DNPC  */
+		else if(!strcmp(biosid, ID_ADNP))
+			rc = 0;		/* this is a ADNPC */
+	}
+	iounmap((void *)biosid);
+	return(rc);
+}
+
+
+static int __init init_dnpc(void)
+{
+	int is_dnp;
+
+	/*
+	** determine hardware (DNP/ADNP/invalid)
+	*/	
+	if((is_dnp = dnp_adnp_probe()) < 0)
+		return -ENXIO;
+
+	/*
+	** Things are set up for ADNP by default
+	** -> modify all that needs to be different for DNP
+	*/
+	if(is_dnp)
+	{	/*
+		** Adjust window size, select correct set_vpp function.
+		** The partitioning scheme is identical on both DNP
+		** and ADNP except for the size of the third partition.
+		*/
+		int i;
+		dnpc_map.size          = DNP_WINDOW_SIZE;
+		dnpc_map.set_vpp       = dnp_set_vpp;
+		partition_info[2].size = 0xf0000;
+
+		/*
+		** increment all string pointers so the leading 'A' gets skipped,
+		** thus turning all occurrences of "ADNP ..." into "DNP ..."
+		*/
+		++dnpc_map.name;
+		for(i = 0; i < NUM_PARTITIONS; i++)
+			++partition_info[i].name;
+		higlvl_partition_info[1].size = DNP_WINDOW_SIZE - 
+			CONFIG_MTD_DILNETPC_BOOTSIZE - 0x20000;
+		for(i = 0; i < NUM_HIGHLVL_PARTITIONS; i++)
+			++higlvl_partition_info[i].name;
+	}
+
+	printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%lx\n", 
+		is_dnp ? "DNPC" : "ADNP", dnpc_map.size, dnpc_map.phys);
+
+	dnpc_map.virt = ioremap_nocache(dnpc_map.phys, dnpc_map.size);
+
+	dnpc_map_flash(dnpc_map.phys, dnpc_map.size);
+
+	if (!dnpc_map.virt) {
+		printk("Failed to ioremap_nocache\n");
+		return -EIO;
+	}
+	simple_map_init(&dnpc_map);
+
+	printk("FLASH virtual address: 0x%p\n", dnpc_map.virt);
+
+	mymtd = do_map_probe("jedec_probe", &dnpc_map);
+
+	if (!mymtd)
+		mymtd = do_map_probe("cfi_probe", &dnpc_map);
+
+	/*
+	** If flash probes fail, try to make flashes accessible
+	** at least as ROM. Ajust erasesize in this case since
+	** the default one (128M) will break our partitioning
+	*/
+	if (!mymtd)
+		if((mymtd = do_map_probe("map_rom", &dnpc_map)))
+			mymtd->erasesize = 0x10000;
+
+	if (!mymtd) {
+		iounmap(dnpc_map.virt);
+		return -ENXIO;
+	}
+		
+	mymtd->owner = THIS_MODULE;
+
+	/*
+	** Supply pointers to lowlvl_parts[] array to add_mtd_partitions()
+	** -> add_mtd_partitions() will _not_ register MTD devices for
+	** the partitions, but will instead store pointers to the MTD
+	** objects it creates into our lowlvl_parts[] array.
+	** NOTE: we arrange the pointers such that the sequence of the
+	**       partitions gets re-arranged: partition #2 follows
+	**       partition #0.
+	*/
+	partition_info[0].mtdp = &lowlvl_parts[0];
+	partition_info[1].mtdp = &lowlvl_parts[2];
+	partition_info[2].mtdp = &lowlvl_parts[1];
+	partition_info[3].mtdp = &lowlvl_parts[3];
+
+	add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
+
+	/*
+	** now create a virtual MTD device by concatenating the for partitions
+	** (in the sequence given by the lowlvl_parts[] array.
+	*/
+	merged_mtd = mtd_concat_create(lowlvl_parts, NUM_PARTITIONS, "(A)DNP Flash Concatenated");
+	if(merged_mtd)
+	{	/*
+		** now partition the new device the way we want it. This time,
+		** we do not supply mtd pointers in higlvl_partition_info, so
+		** add_mtd_partitions() will register the devices.
+		*/
+		add_mtd_partitions(merged_mtd, higlvl_partition_info, NUM_HIGHLVL_PARTITIONS);
+	}
+
+	return 0;
+}
+
+static void __exit cleanup_dnpc(void)
+{
+	if(merged_mtd) {
+		del_mtd_partitions(merged_mtd);
+		mtd_concat_destroy(merged_mtd);
+	}
+
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+	if (dnpc_map.virt) {
+		iounmap(dnpc_map.virt);
+		dnpc_unmap_flash();
+		dnpc_map.virt = NULL;
+	}
+}
+
+module_init(init_dnpc);
+module_exit(cleanup_dnpc);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
+MODULE_DESCRIPTION("MTD map driver for SSV DIL/NetPC DNP & ADNP");
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
new file mode 100644
index 000000000000..b9bc63503e26
--- /dev/null
+++ b/drivers/mtd/maps/dmv182.c
@@ -0,0 +1,149 @@
+
+/*
+ * drivers/mtd/maps/svme182.c
+ * 
+ * Flash map driver for the Dy4 SVME182 board
+ * 
+ * $Id: dmv182.c,v 1.5 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * Copyright 2003-2004, TimeSys Corporation
+ *
+ * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/errno.h>
+
+/*
+ * This driver currently handles only the 16MiB user flash bank 1 on the
+ * board.  It does not provide access to bank 0 (contains the Dy4 FFW), bank 2
+ * (VxWorks boot), or the optional 48MiB expansion flash.
+ *
+ * scott.wood@timesys.com: On the newer boards with 128MiB flash, it
+ * now supports the first 96MiB (the boot flash bank containing FFW
+ * is excluded).  The VxWorks loader is in partition 1.
+ */
+
+#define FLASH_BASE_ADDR 0xf0000000
+#define FLASH_BANK_SIZE (128*1024*1024)
+
+MODULE_AUTHOR("Scott Wood, TimeSys Corporation <scott.wood@timesys.com>");
+MODULE_DESCRIPTION("User-programmable flash device on the Dy4 SVME182 board");
+MODULE_LICENSE("GPL");
+
+static struct map_info svme182_map = {
+	.name		= "Dy4 SVME182",
+	.bankwidth	= 32,
+	.size		=  128 * 1024 * 1024
+};
+
+#define BOOTIMAGE_PART_SIZE		((6*1024*1024)-RESERVED_PART_SIZE)
+
+// Allow 6MiB for the kernel
+#define NEW_BOOTIMAGE_PART_SIZE  (6 * 1024 * 1024)
+// Allow 1MiB for the bootloader
+#define NEW_BOOTLOADER_PART_SIZE (1024 * 1024)
+// Use the remaining 9MiB at the end of flash for the RFS
+#define NEW_RFS_PART_SIZE        (0x01000000 - NEW_BOOTLOADER_PART_SIZE - \
+                                  NEW_BOOTIMAGE_PART_SIZE)
+
+static struct mtd_partition svme182_partitions[] = {
+	// The Lower PABS is only 128KiB, but the partition code doesn't
+	// like partitions that don't end on the largest erase block
+	// size of the device, even if all of the erase blocks in the
+	// partition are small ones.  The hardware should prevent
+	// writes to the actual PABS areas.
+	{
+		name:       "Lower PABS and CPU 0 bootloader or kernel",
+		size:       6*1024*1024,
+		offset:     0,
+	},
+	{
+		name:       "Root Filesystem",
+		size:       10*1024*1024,
+		offset:     MTDPART_OFS_NXTBLK
+	},
+	{
+		name:       "CPU1 Bootloader",
+		size:       1024*1024,
+		offset:     MTDPART_OFS_NXTBLK,
+	},
+	{
+		name:       "Extra",
+		size:       110*1024*1024,
+		offset:     MTDPART_OFS_NXTBLK
+	},
+	{
+		name:       "Foundation Firmware and Upper PABS",
+		size:       1024*1024,
+		offset:     MTDPART_OFS_NXTBLK,
+		mask_flags: MTD_WRITEABLE // read-only
+	}
+};
+
+static struct mtd_info *this_mtd;
+
+static int __init init_svme182(void)
+{
+	struct mtd_partition *partitions;
+	int num_parts = sizeof(svme182_partitions) / sizeof(struct mtd_partition);
+
+	partitions = svme182_partitions;
+
+	svme182_map.virt = ioremap(FLASH_BASE_ADDR, svme182_map.size);
+		
+	if (svme182_map.virt == 0) {
+		printk("Failed to ioremap FLASH memory area.\n");
+		return -EIO;
+	}
+
+	simple_map_init(&svme182_map);
+
+	this_mtd = do_map_probe("cfi_probe", &svme182_map);
+	if (!this_mtd)
+	{
+		iounmap((void *)svme182_map.virt);
+		return -ENXIO;
+	}
+
+	printk(KERN_NOTICE "SVME182 flash device: %dMiB at 0x%08x\n",
+		   this_mtd->size >> 20, FLASH_BASE_ADDR);
+
+	this_mtd->owner = THIS_MODULE;
+	add_mtd_partitions(this_mtd, partitions, num_parts);
+
+	return 0;
+}
+
+static void __exit cleanup_svme182(void)
+{
+	if (this_mtd)
+	{
+		del_mtd_partitions(this_mtd);
+		map_destroy(this_mtd);
+	}
+
+	if (svme182_map.virt)
+	{
+		iounmap((void *)svme182_map.virt);
+		svme182_map.virt = 0;
+	}
+
+	return;
+}
+
+module_init(init_svme182);
+module_exit(cleanup_svme182);
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
new file mode 100644
index 000000000000..b9d9cf4854b6
--- /dev/null
+++ b/drivers/mtd/maps/ebony.c
@@ -0,0 +1,163 @@
+/*
+ * $Id: ebony.c,v 1.15 2004/12/09 18:39:54 holindho Exp $
+ * 
+ * Mapping for Ebony user flash
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2002-2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+#include <linux/version.h>
+#include <asm/io.h>
+#include <asm/ibm44x.h>
+#include <platforms/4xx/ebony.h>
+
+static struct mtd_info *flash;
+
+static struct map_info ebony_small_map = {
+	.name =		"Ebony small flash",
+	.size =		EBONY_SMALL_FLASH_SIZE,
+	.bankwidth =	1,
+};
+
+static struct map_info ebony_large_map = {
+	.name =		"Ebony large flash",
+	.size =		EBONY_LARGE_FLASH_SIZE,
+	.bankwidth =	1,
+};
+
+static struct mtd_partition ebony_small_partitions[] = {
+	{
+		.name =   "OpenBIOS",
+		.offset = 0x0,
+		.size =   0x80000,
+	}
+};
+
+static struct mtd_partition ebony_large_partitions[] = {
+	{
+		.name =   "fs",
+		.offset = 0,
+		.size =   0x380000,
+	},
+	{
+		.name =   "firmware",
+		.offset = 0x380000,
+		.size =   0x80000,
+	}
+};
+
+int __init init_ebony(void)
+{
+	u8 fpga0_reg;
+	u8 __iomem *fpga0_adr;
+	unsigned long long small_flash_base, large_flash_base;
+
+	fpga0_adr = ioremap64(EBONY_FPGA_ADDR, 16);
+	if (!fpga0_adr)
+		return -ENOMEM;
+
+	fpga0_reg = readb(fpga0_adr);
+	iounmap(fpga0_adr);
+
+	if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
+			!EBONY_FLASH_SEL(fpga0_reg))
+		small_flash_base = EBONY_SMALL_FLASH_HIGH2;
+	else if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
+			EBONY_FLASH_SEL(fpga0_reg))
+		small_flash_base = EBONY_SMALL_FLASH_HIGH1;
+	else if (!EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
+			!EBONY_FLASH_SEL(fpga0_reg))
+		small_flash_base = EBONY_SMALL_FLASH_LOW2;
+	else
+		small_flash_base = EBONY_SMALL_FLASH_LOW1;
+			
+	if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
+			!EBONY_ONBRD_FLASH_EN(fpga0_reg))
+		large_flash_base = EBONY_LARGE_FLASH_LOW;
+	else
+		large_flash_base = EBONY_LARGE_FLASH_HIGH;
+
+	ebony_small_map.phys = small_flash_base;
+	ebony_small_map.virt = ioremap64(small_flash_base,
+					 ebony_small_map.size);
+
+	if (!ebony_small_map.virt) {
+		printk("Failed to ioremap flash\n");
+		return -EIO;
+	}
+
+	simple_map_init(&ebony_small_map);
+
+	flash = do_map_probe("jedec_probe", &ebony_small_map);
+	if (flash) {
+		flash->owner = THIS_MODULE;
+		add_mtd_partitions(flash, ebony_small_partitions,
+					ARRAY_SIZE(ebony_small_partitions));
+	} else {
+		printk("map probe failed for flash\n");
+		return -ENXIO;
+	}
+
+	ebony_large_map.phys = large_flash_base;
+	ebony_large_map.virt = ioremap64(large_flash_base,
+					 ebony_large_map.size);
+
+	if (!ebony_large_map.virt) {
+		printk("Failed to ioremap flash\n");
+		return -EIO;
+	}
+
+	simple_map_init(&ebony_large_map);
+
+	flash = do_map_probe("jedec_probe", &ebony_large_map);
+	if (flash) {
+		flash->owner = THIS_MODULE;
+		add_mtd_partitions(flash, ebony_large_partitions,
+					ARRAY_SIZE(ebony_large_partitions));
+	} else {
+		printk("map probe failed for flash\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void __exit cleanup_ebony(void)
+{
+	if (flash) {
+		del_mtd_partitions(flash);
+		map_destroy(flash);
+	}
+
+	if (ebony_small_map.virt) {
+		iounmap(ebony_small_map.virt);
+		ebony_small_map.virt = NULL;
+	}
+
+	if (ebony_large_map.virt) {
+		iounmap(ebony_large_map.virt);
+		ebony_large_map.virt = NULL;
+	}
+}
+
+module_init(init_ebony);
+module_exit(cleanup_ebony);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matt Porter <mporter@kernel.crashing.org>");
+MODULE_DESCRIPTION("MTD map and partitions for IBM 440GP Ebony boards");
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
new file mode 100644
index 000000000000..8b0da394f3fa
--- /dev/null
+++ b/drivers/mtd/maps/edb7312.c
@@ -0,0 +1,147 @@
+/*
+ * $Id: edb7312.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * Handle mapping of the NOR flash on Cogent EDB7312 boards
+ *
+ * Copyright 2002 SYSGO Real-Time Solutions GmbH
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/config.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
+#define WINDOW_ADDR 0x00000000      /* physical properties of flash */
+#define WINDOW_SIZE 0x01000000
+#define BUSWIDTH    2
+#define FLASH_BLOCKSIZE_MAIN	0x20000
+#define FLASH_NUMBLOCKS_MAIN	128
+/* can be "cfi_probe", "jedec_probe", "map_rom", NULL }; */
+#define PROBETYPES { "cfi_probe", NULL }
+
+#define MSG_PREFIX "EDB7312-NOR:"   /* prefix for our printk()'s */
+#define MTDID      "edb7312-nor"    /* for mtdparts= partitioning */
+
+static struct mtd_info *mymtd;
+
+struct map_info edb7312nor_map = {
+	.name = "NOR flash on EDB7312",
+	.size = WINDOW_SIZE,
+	.bankwidth = BUSWIDTH,
+	.phys = WINDOW_ADDR,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+/*
+ * MTD partitioning stuff 
+ */
+static struct mtd_partition static_partitions[3] =
+{
+	{
+		.name = "ARMboot",
+		.size = 0x40000,
+		.offset = 0
+	},
+	{
+		.name = "Kernel",
+		.size = 0x200000,
+		.offset = 0x40000
+	},
+	{
+		.name = "RootFS",
+		.size = 0xDC0000,
+		.offset = 0x240000
+	},
+};
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+#endif
+
+static int                   mtd_parts_nb = 0;
+static struct mtd_partition *mtd_parts    = 0;
+
+int __init init_edb7312nor(void)
+{
+	static const char *rom_probe_types[] = PROBETYPES;
+	const char **type;
+	const char *part_type = 0;
+
+       	printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n", 
+	       WINDOW_SIZE, WINDOW_ADDR);
+	edb7312nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
+
+	if (!edb7312nor_map.virt) {
+		printk(MSG_PREFIX "failed to ioremap\n");
+		return -EIO;
+	}
+	
+	simple_map_init(&edb7312nor_map);
+
+	mymtd = 0;
+	type = rom_probe_types;
+	for(; !mymtd && *type; type++) {
+		mymtd = do_map_probe(*type, &edb7312nor_map);
+	}
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+		mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, MTDID);
+		if (mtd_parts_nb > 0)
+		  part_type = "detected";
+
+		if (mtd_parts_nb == 0)
+		{
+			mtd_parts = static_partitions;
+			mtd_parts_nb = ARRAY_SIZE(static_partitions);
+			part_type = "static";
+		}
+#endif
+		add_mtd_device(mymtd);
+		if (mtd_parts_nb == 0)
+		  printk(KERN_NOTICE MSG_PREFIX "no partition info available\n");
+		else
+		{
+			printk(KERN_NOTICE MSG_PREFIX
+			       "using %s partition definition\n", part_type);
+			add_mtd_partitions(mymtd, mtd_parts, mtd_parts_nb);
+		}
+		return 0;
+	}
+
+	iounmap((void *)edb7312nor_map.virt);
+	return -ENXIO;
+}
+
+static void __exit cleanup_edb7312nor(void)
+{
+	if (mymtd) {
+		del_mtd_device(mymtd);
+		map_destroy(mymtd);
+	}
+	if (edb7312nor_map.virt) {
+		iounmap((void *)edb7312nor_map.virt);
+		edb7312nor_map.virt = 0;
+	}
+}
+
+module_init(init_edb7312nor);
+module_exit(cleanup_edb7312nor);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
+MODULE_DESCRIPTION("Generic configurable MTD map driver");
diff --git a/drivers/mtd/maps/elan-104nc.c b/drivers/mtd/maps/elan-104nc.c
new file mode 100644
index 000000000000..e9465f5c069e
--- /dev/null
+++ b/drivers/mtd/maps/elan-104nc.c
@@ -0,0 +1,228 @@
+/* elan-104nc.c -- MTD map driver for Arcom Control Systems ELAN-104NC
+ 
+   Copyright (C) 2000 Arcom Control System Ltd
+ 
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+ 
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+ 
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+   $Id: elan-104nc.c,v 1.25 2004/11/28 09:40:39 dwmw2 Exp $
+
+The ELAN-104NC has up to 8 Mibyte of Intel StrataFlash (28F320/28F640) in x16
+mode.  This drivers uses the CFI probe and Intel Extended Command Set drivers.
+
+The flash is accessed as follows:
+
+   32 kbyte memory window at 0xb0000-0xb7fff
+   
+   16 bit I/O port (0x22) for some sort of paging.
+
+The single flash device is divided into 3 partition which appear as separate
+MTD devices.
+
+Linux thinks that the I/O port is used by the PIC and hence check_region() will
+always fail.  So we don't do it.  I just hope it doesn't break anything.
+*/
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define WINDOW_START 0xb0000
+/* Number of bits in offset. */
+#define WINDOW_SHIFT 15
+#define WINDOW_LENGTH (1 << WINDOW_SHIFT)
+/* The bits for the offset into the window. */
+#define WINDOW_MASK (WINDOW_LENGTH-1)
+#define PAGE_IO 0x22
+#define PAGE_IO_SIZE 2
+
+static volatile int page_in_window = -1; // Current page in window.
+static void __iomem *iomapadr;
+static DEFINE_SPINLOCK(elan_104nc_spin);
+
+/* partition_info gives details on the logical partitions that the split the 
+ * single flash device into. If the size if zero we use up to the end of the
+ * device. */
+static struct mtd_partition partition_info[]={
+    { .name = "ELAN-104NC flash boot partition", 
+      .offset = 0, 
+      .size = 640*1024 },
+    { .name = "ELAN-104NC flash partition 1", 
+      .offset = 640*1024, 
+      .size = 896*1024 },
+    { .name = "ELAN-104NC flash partition 2", 
+      .offset = (640+896)*1024 }
+};
+#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+
+/*
+ * If no idea what is going on here.  This is taken from the FlashFX stuff.
+ */
+#define ROMCS 1
+
+static inline void elan_104nc_setup(void)
+{
+    u16 t;
+
+    outw( 0x0023 + ROMCS*2, PAGE_IO );
+    t=inb( PAGE_IO+1 );
+
+    t=(t & 0xf9) | 0x04;
+
+    outw( ((0x0023 + ROMCS*2) | (t << 8)), PAGE_IO );
+}
+
+static inline void elan_104nc_page(struct map_info *map, unsigned long ofs)
+{
+	unsigned long page = ofs >> WINDOW_SHIFT;
+       
+	if( page!=page_in_window ) {
+		int cmd1;
+		int cmd2;
+
+		cmd1=(page & 0x700) + 0x0833 + ROMCS*0x4000;
+		cmd2=((page & 0xff) << 8) + 0x0032;
+
+		outw( cmd1, PAGE_IO );
+		outw( cmd2, PAGE_IO );
+
+		page_in_window = page;
+	}
+}
+
+
+static map_word elan_104nc_read16(struct map_info *map, unsigned long ofs)
+{
+	map_word ret;
+	spin_lock(&elan_104nc_spin);
+	elan_104nc_page(map, ofs);
+	ret.x[0] = readw(iomapadr + (ofs & WINDOW_MASK));
+	spin_unlock(&elan_104nc_spin);
+	return ret;
+}
+
+static void elan_104nc_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	while (len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
+		
+		spin_lock(&elan_104nc_spin);
+		elan_104nc_page(map, from);
+		memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
+		spin_unlock(&elan_104nc_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static void elan_104nc_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+	spin_lock(&elan_104nc_spin);
+	elan_104nc_page(map, adr);
+	writew(d.x[0], iomapadr + (adr & WINDOW_MASK));
+	spin_unlock(&elan_104nc_spin);
+}
+
+static void elan_104nc_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{	
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
+		
+		spin_lock(&elan_104nc_spin);
+		elan_104nc_page(map, to);
+		memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
+		spin_unlock(&elan_104nc_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static struct map_info elan_104nc_map = {
+	.name = "ELAN-104NC flash",
+	.phys = NO_XIP,
+	.size = 8*1024*1024, /* this must be set to a maximum possible amount
+			of flash so the cfi probe routines find all
+			the chips */
+	.bankwidth = 2,
+	.read = elan_104nc_read16,
+	.copy_from = elan_104nc_copy_from,
+	.write = elan_104nc_write16,
+	.copy_to = elan_104nc_copy_to
+};
+
+/* MTD device for all of the flash. */
+static struct mtd_info *all_mtd;
+
+static void cleanup_elan_104nc(void)
+{
+	if( all_mtd ) {
+		del_mtd_partitions( all_mtd );
+		map_destroy( all_mtd );
+	}
+
+	iounmap(iomapadr);
+}
+
+static int __init init_elan_104nc(void)
+{
+	/* Urg! We use I/O port 0x22 without request_region()ing it,
+	   because it's already allocated to the PIC. */
+
+  	iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
+	if (!iomapadr) {
+		printk( KERN_ERR"%s: failed to ioremap memory region\n",
+			elan_104nc_map.name );
+		return -EIO;
+	}
+
+	printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
+		elan_104nc_map.name,
+		PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
+		WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
+
+	elan_104nc_setup();
+
+	/* Probe for chip. */
+	all_mtd = do_map_probe("cfi_probe",  &elan_104nc_map );
+	if( !all_mtd ) {
+		cleanup_elan_104nc();
+		return -ENXIO;
+	}
+	
+	all_mtd->owner = THIS_MODULE;
+
+	/* Create MTD devices for each partition. */
+	add_mtd_partitions( all_mtd, partition_info, NUM_PARTITIONS );
+
+	return 0;
+}
+
+module_init(init_elan_104nc);
+module_exit(cleanup_elan_104nc);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arcom Control Systems Ltd.");
+MODULE_DESCRIPTION("MTD map driver for Arcom Control Systems ELAN-104NC");
diff --git a/drivers/mtd/maps/epxa10db-flash.c b/drivers/mtd/maps/epxa10db-flash.c
new file mode 100644
index 000000000000..ab6dbe2b8cce
--- /dev/null
+++ b/drivers/mtd/maps/epxa10db-flash.c
@@ -0,0 +1,176 @@
+/*
+ * Flash memory access on EPXA based devices
+ *
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ *  Copyright (C) 2001 Altera Corporation
+ *  Copyright (C) 2001 Red Hat, Inc.
+ *
+ * $Id: epxa10db-flash.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $ 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#ifdef CONFIG_EPXA10DB
+#define BOARD_NAME "EPXA10DB"
+#else
+#define BOARD_NAME "EPXA1DB"
+#endif
+
+static int nr_parts = 0;
+static struct mtd_partition *parts;
+
+static struct mtd_info *mymtd;
+
+static int epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts);
+
+
+static struct map_info epxa_map = {
+	.name =		"EPXA flash",
+	.size =		FLASH_SIZE,
+	.bankwidth =	2,
+	.phys =		FLASH_START,
+};
+
+static const char *probes[] = { "RedBoot", "afs", NULL };
+
+static int __init epxa_mtd_init(void)
+{
+	int i;
+	
+	printk(KERN_NOTICE "%s flash device: 0x%x at 0x%x\n", BOARD_NAME, FLASH_SIZE, FLASH_START);
+
+	epxa_map.virt = ioremap(FLASH_START, FLASH_SIZE);
+	if (!epxa_map.virt) {
+		printk("Failed to ioremap %s flash\n",BOARD_NAME);
+		return -EIO;
+	}
+	simple_map_init(&epxa_map);
+
+	mymtd = do_map_probe("cfi_probe", &epxa_map);
+	if (!mymtd) {
+		iounmap((void *)epxa_map.virt);
+		return -ENXIO;
+	}
+
+	mymtd->owner = THIS_MODULE;
+
+	/* Unlock the flash device. */
+	if(mymtd->unlock){
+		for (i=0; i<mymtd->numeraseregions;i++){
+			int j;
+			for(j=0;j<mymtd->eraseregions[i].numblocks;j++){
+				mymtd->unlock(mymtd,mymtd->eraseregions[i].offset + j * mymtd->eraseregions[i].erasesize,mymtd->eraseregions[i].erasesize);
+			}
+		}
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	nr_parts = parse_mtd_partitions(mymtd, probes, &parts, 0);
+
+	if (nr_parts > 0) {
+		add_mtd_partitions(mymtd, parts, nr_parts);
+		return 0;
+	}
+#endif
+	/* No recognised partitioning schemes found - use defaults */
+	nr_parts = epxa_default_partitions(mymtd, &parts);
+	if (nr_parts > 0) {
+		add_mtd_partitions(mymtd, parts, nr_parts);
+		return 0;
+	}
+
+	/* If all else fails... */
+	add_mtd_device(mymtd);
+	return 0;
+}
+
+static void __exit epxa_mtd_cleanup(void)
+{
+	if (mymtd) {
+		if (nr_parts)
+			del_mtd_partitions(mymtd);
+		else
+			del_mtd_device(mymtd);
+		map_destroy(mymtd);
+	}
+	if (epxa_map.virt) {
+		iounmap((void *)epxa_map.virt);
+		epxa_map.virt = 0;
+	}
+}
+
+
+/* 
+ * This will do for now, once we decide which bootldr we're finally 
+ * going to use then we'll remove this function and do it properly
+ *
+ * Partions are currently (as offsets from base of flash):
+ * 0x00000000 - 0x003FFFFF - bootloader (!)
+ * 0x00400000 - 0x00FFFFFF - Flashdisk
+ */
+
+static int __init epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts)
+{
+	struct mtd_partition *parts;
+	int ret, i;
+	int npartitions = 0;
+	char *names; 
+	const char *name = "jffs";
+
+	printk("Using default partitions for %s\n",BOARD_NAME);
+	npartitions=1;
+	parts = kmalloc(npartitions*sizeof(*parts)+strlen(name), GFP_KERNEL);
+	memzero(parts,npartitions*sizeof(*parts)+strlen(name));
+	if (!parts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	i=0;
+	names = (char *)&parts[npartitions];	
+	parts[i].name = names;
+	names += strlen(name) + 1;
+	strcpy(parts[i].name, name);
+
+#ifdef CONFIG_EPXA10DB
+	parts[i].size = FLASH_SIZE-0x00400000;
+	parts[i].offset = 0x00400000;
+#else
+	parts[i].size = FLASH_SIZE-0x00180000;
+	parts[i].offset = 0x00180000;
+#endif
+
+ out:
+	*pparts = parts;
+	return npartitions;
+}
+
+
+module_init(epxa_mtd_init);
+module_exit(epxa_mtd_cleanup);
+
+MODULE_AUTHOR("Clive Davies");
+MODULE_DESCRIPTION("Altera epxa mtd flash map");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
new file mode 100644
index 000000000000..068bb6a54520
--- /dev/null
+++ b/drivers/mtd/maps/fortunet.c
@@ -0,0 +1,271 @@
+/* fortunet.c memory map
+ *
+ * $Id: fortunet.c,v 1.9 2004/11/04 13:24:14 gleixner Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#define MAX_NUM_REGIONS		4
+#define MAX_NUM_PARTITIONS	8
+
+#define DEF_WINDOW_ADDR_PHY	0x00000000
+#define DEF_WINDOW_SIZE		0x00800000		// 8 Mega Bytes
+
+#define MTD_FORTUNET_PK		"MTD FortuNet: "
+
+#define MAX_NAME_SIZE		128
+
+struct map_region
+{
+	int			window_addr_physical;
+	int			altbankwidth;
+	struct map_info		map_info;
+	struct mtd_info		*mymtd;
+	struct mtd_partition	parts[MAX_NUM_PARTITIONS];
+	char			map_name[MAX_NAME_SIZE];
+	char			parts_name[MAX_NUM_PARTITIONS][MAX_NAME_SIZE];
+};
+
+static struct map_region	map_regions[MAX_NUM_REGIONS];
+static int			map_regions_set[MAX_NUM_REGIONS] = {0,0,0,0};
+static int			map_regions_parts[MAX_NUM_REGIONS] = {0,0,0,0};
+
+
+
+struct map_info default_map = {
+	.size = DEF_WINDOW_SIZE,
+	.bankwidth = 4,
+};
+
+static char * __init get_string_option(char *dest,int dest_size,char *sor)
+{
+	if(!dest_size)
+		return sor;
+	dest_size--;
+	while(*sor)
+	{
+		if(*sor==',')
+		{
+			sor++;
+			break;
+		}
+		else if(*sor=='\"')
+		{
+			sor++;
+			while(*sor)
+			{
+				if(*sor=='\"')
+				{
+					sor++;
+					break;
+				}
+				*dest = *sor;
+				dest++;
+				sor++;
+				dest_size--;
+				if(!dest_size)
+				{
+					*dest = 0;
+					return sor;
+				}
+			}
+		}
+		else
+		{
+			*dest = *sor;
+			dest++;
+			sor++;
+			dest_size--;
+			if(!dest_size)
+			{
+				*dest = 0;
+				return sor;
+			}
+		}
+	}
+	*dest = 0;
+	return sor;
+}
+
+static int __init MTD_New_Region(char *line)
+{
+	char	string[MAX_NAME_SIZE];
+	int	params[6];
+	get_options (get_string_option(string,sizeof(string),line),6,params);
+	if(params[0]<1)
+	{
+		printk(MTD_FORTUNET_PK "Bad parameters for MTD Region "
+			" name,region-number[,base,size,bankwidth,altbankwidth]\n");
+		return 1;
+	}
+	if((params[1]<0)||(params[1]>=MAX_NUM_REGIONS))
+	{
+		printk(MTD_FORTUNET_PK "Bad region index of %d only have 0..%u regions\n",
+			params[1],MAX_NUM_REGIONS-1);
+		return 1;
+	}
+	memset(&map_regions[params[1]],0,sizeof(map_regions[params[1]]));
+	memcpy(&map_regions[params[1]].map_info,
+		&default_map,sizeof(map_regions[params[1]].map_info));
+        map_regions_set[params[1]] = 1;
+        map_regions[params[1]].window_addr_physical = DEF_WINDOW_ADDR_PHY;
+        map_regions[params[1]].altbankwidth = 2;
+        map_regions[params[1]].mymtd = NULL;
+	map_regions[params[1]].map_info.name = map_regions[params[1]].map_name;
+	strcpy(map_regions[params[1]].map_info.name,string);
+	if(params[0]>1)
+	{
+		map_regions[params[1]].window_addr_physical = params[2];
+	}
+	if(params[0]>2)
+	{
+		map_regions[params[1]].map_info.size = params[3];
+	}
+	if(params[0]>3)
+	{
+		map_regions[params[1]].map_info.bankwidth = params[4];
+	}
+	if(params[0]>4)
+	{
+		map_regions[params[1]].altbankwidth = params[5];
+	}
+	return 1;
+}
+
+static int __init MTD_New_Partition(char *line)
+{
+	char	string[MAX_NAME_SIZE];
+	int	params[4];
+	get_options (get_string_option(string,sizeof(string),line),4,params);
+	if(params[0]<3)
+	{
+		printk(MTD_FORTUNET_PK "Bad parameters for MTD Partition "
+			" name,region-number,size,offset\n");
+		return 1;
+	}
+	if((params[1]<0)||(params[1]>=MAX_NUM_REGIONS))
+	{
+		printk(MTD_FORTUNET_PK "Bad region index of %d only have 0..%u regions\n",
+			params[1],MAX_NUM_REGIONS-1);
+		return 1;
+	}
+	if(map_regions_parts[params[1]]>=MAX_NUM_PARTITIONS)
+	{
+		printk(MTD_FORTUNET_PK "Out of space for partition in this region\n");
+		return 1;
+	}
+	map_regions[params[1]].parts[map_regions_parts[params[1]]].name =
+		map_regions[params[1]].	parts_name[map_regions_parts[params[1]]];
+	strcpy(map_regions[params[1]].parts[map_regions_parts[params[1]]].name,string);
+	map_regions[params[1]].parts[map_regions_parts[params[1]]].size =
+		params[2];
+	map_regions[params[1]].parts[map_regions_parts[params[1]]].offset =
+		params[3];
+	map_regions[params[1]].parts[map_regions_parts[params[1]]].mask_flags = 0;
+	map_regions_parts[params[1]]++;
+	return 1;
+}
+
+__setup("MTD_Region=", MTD_New_Region);
+__setup("MTD_Partition=", MTD_New_Partition);
+
+/* Backwards-spelling-compatibility */
+__setup("MTD_Partion=", MTD_New_Partition);
+
+int __init init_fortunet(void)
+{
+	int	ix,iy;
+	for(iy=ix=0;ix<MAX_NUM_REGIONS;ix++)
+	{
+		if(map_regions_parts[ix]&&(!map_regions_set[ix]))
+		{
+			printk(MTD_FORTUNET_PK "Region %d is not setup (Setting to default)\n",
+				ix);
+			memset(&map_regions[ix],0,sizeof(map_regions[ix]));
+			memcpy(&map_regions[ix].map_info,&default_map,
+				sizeof(map_regions[ix].map_info));
+			map_regions_set[ix] = 1;
+			map_regions[ix].window_addr_physical = DEF_WINDOW_ADDR_PHY;
+			map_regions[ix].altbankwidth = 2;
+			map_regions[ix].mymtd = NULL;
+			map_regions[ix].map_info.name = map_regions[ix].map_name;
+			strcpy(map_regions[ix].map_info.name,"FORTUNET");
+		}
+		if(map_regions_set[ix])
+		{
+			iy++;
+			printk(KERN_NOTICE MTD_FORTUNET_PK "%s flash device at physically "
+				" address %x size %x\n",
+				map_regions[ix].map_info.name,
+				map_regions[ix].window_addr_physical,
+				map_regions[ix].map_info.size);
+
+			map_regions[ix].map_info.phys =	map_regions[ix].window_addr_physical,
+
+			map_regions[ix].map_info.virt = 
+				ioremap_nocache(
+				map_regions[ix].window_addr_physical,
+				map_regions[ix].map_info.size);
+			if(!map_regions[ix].map_info.virt)
+			{
+				printk(MTD_FORTUNET_PK "%s flash failed to ioremap!\n",
+					map_regions[ix].map_info.name);
+				return -ENXIO;
+			}
+			simple_map_init(&map_regions[ix].map_info);
+
+			printk(KERN_NOTICE MTD_FORTUNET_PK "%s flash is virtually at: %x\n",
+				map_regions[ix].map_info.name,
+				map_regions[ix].map_info.virt);
+			map_regions[ix].mymtd = do_map_probe("cfi_probe",
+				&map_regions[ix].map_info);
+			if((!map_regions[ix].mymtd)&&(
+				map_regions[ix].altbankwidth!=map_regions[ix].map_info.bankwidth))
+			{
+				printk(KERN_NOTICE MTD_FORTUNET_PK "Trying alternate bankwidth "
+					"for %s flash.\n",
+					map_regions[ix].map_info.name);
+				map_regions[ix].map_info.bankwidth =
+					map_regions[ix].altbankwidth;
+				map_regions[ix].mymtd = do_map_probe("cfi_probe",
+					&map_regions[ix].map_info);
+			}
+			map_regions[ix].mymtd->owner = THIS_MODULE;
+			add_mtd_partitions(map_regions[ix].mymtd,
+				map_regions[ix].parts,map_regions_parts[ix]);
+		}
+	}
+	if(iy)
+		return 0;
+	return -ENXIO;
+}
+
+static void __exit cleanup_fortunet(void)
+{
+	int	ix;
+	for(ix=0;ix<MAX_NUM_REGIONS;ix++)
+	{
+		if(map_regions_set[ix])
+		{
+			if( map_regions[ix].mymtd )
+			{
+				del_mtd_partitions( map_regions[ix].mymtd );
+				map_destroy( map_regions[ix].mymtd );
+			}
+			iounmap((void *)map_regions[ix].map_info.virt);
+		}
+	}
+}
+
+module_init(init_fortunet);
+module_exit(cleanup_fortunet);
+
+MODULE_AUTHOR("FortuNet, Inc.");
+MODULE_DESCRIPTION("MTD map driver for FortuNet boards");
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
new file mode 100644
index 000000000000..c73828171d9b
--- /dev/null
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -0,0 +1,144 @@
+/*
+ * Flash memory access on Hynix GMS30C7201/HMS30C7202 based 
+ * evaluation boards
+ * 
+ * $Id: h720x-flash.c,v 1.11 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * (C) 2002 Jungjun Kim <jungjun.kim@hynix.com>
+ *     2003 Thomas Gleixner <tglx@linutronix.de>	
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+static struct mtd_info *mymtd;
+
+static struct map_info h720x_map = {
+	.name =		"H720X",
+	.bankwidth =	4,
+	.size =		FLASH_SIZE,
+	.phys =		FLASH_PHYS,
+};
+
+static struct mtd_partition h720x_partitions[] = {
+        {
+                .name = "ArMon",
+                .size = 0x00080000,
+                .offset = 0,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "Env",
+                .size = 0x00040000,
+                .offset = 0x00080000,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "Kernel",
+                .size = 0x00180000,
+                .offset = 0x000c0000,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "Ramdisk",
+                .size = 0x00400000,
+                .offset = 0x00240000,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "jffs2",
+                .size = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND
+        }
+};
+
+#define NUM_PARTITIONS  (sizeof(h720x_partitions)/sizeof(h720x_partitions[0]))
+
+static int                   nr_mtd_parts;
+static struct mtd_partition *mtd_parts;
+static const char *probes[] = { "cmdlinepart", NULL };
+
+/*
+ * Initialize FLASH support
+ */
+int __init h720x_mtd_init(void)
+{
+
+	char	*part_type = NULL;
+	
+	h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE);
+
+	if (!h720x_map.virt) {
+		printk(KERN_ERR "H720x-MTD: ioremap failed\n");
+		return -EIO;
+	}
+
+	simple_map_init(&h720x_map);
+
+	// Probe for flash bankwidth 4
+	printk (KERN_INFO "H720x-MTD probing 32bit FLASH\n");
+	mymtd = do_map_probe("cfi_probe", &h720x_map);
+	if (!mymtd) {
+		printk (KERN_INFO "H720x-MTD probing 16bit FLASH\n");
+	    // Probe for bankwidth 2
+	    h720x_map.bankwidth = 2;
+	    mymtd = do_map_probe("cfi_probe", &h720x_map);
+	}
+	    
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+		nr_mtd_parts = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0);
+		if (nr_mtd_parts > 0)
+			part_type = "command line";
+#endif
+		if (nr_mtd_parts <= 0) {
+			mtd_parts = h720x_partitions;
+			nr_mtd_parts = NUM_PARTITIONS;
+			part_type = "builtin";
+		}
+		printk(KERN_INFO "Using %s partition table\n", part_type);
+		add_mtd_partitions(mymtd, mtd_parts, nr_mtd_parts);
+		return 0;
+	}
+
+	iounmap((void *)h720x_map.virt);
+	return -ENXIO;
+}
+
+/*
+ * Cleanup
+ */
+static void __exit h720x_mtd_cleanup(void)
+{
+
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+	
+	/* Free partition info, if commandline partition was used */
+	if (mtd_parts && (mtd_parts != h720x_partitions))
+		kfree (mtd_parts);
+	
+	if (h720x_map.virt) {
+		iounmap((void *)h720x_map.virt);
+		h720x_map.virt = 0;
+	}
+}
+
+
+module_init(h720x_mtd_init);
+module_exit(h720x_mtd_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("MTD map driver for Hynix evaluation boards");
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
new file mode 100644
index 000000000000..29d1cc1bb426
--- /dev/null
+++ b/drivers/mtd/maps/ichxrom.c
@@ -0,0 +1,383 @@
+/*
+ * ichxrom.c
+ *
+ * Normal mappings of chips in physical memory
+ * $Id: ichxrom.c,v 1.16 2004/11/28 09:40:39 dwmw2 Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/list.h>
+
+#define xstr(s) str(s)
+#define str(s) #s
+#define MOD_NAME xstr(KBUILD_BASENAME)
+
+#define ADDRESS_NAME_LEN 18
+
+#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
+
+#define BIOS_CNTL	0x4e
+#define FWH_DEC_EN1	0xE3
+#define FWH_DEC_EN2	0xF0
+#define FWH_SEL1	0xE8
+#define FWH_SEL2	0xEE
+
+struct ichxrom_window {
+	void __iomem* virt;
+	unsigned long phys;
+	unsigned long size;
+	struct list_head maps;
+	struct resource rsrc;
+	struct pci_dev *pdev;
+};
+
+struct ichxrom_map_info {
+	struct list_head list;
+	struct map_info map;
+	struct mtd_info *mtd;
+	struct resource rsrc;
+	char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+};
+
+static struct ichxrom_window ichxrom_window = {
+	.maps = LIST_HEAD_INIT(ichxrom_window.maps),
+};
+
+static void ichxrom_cleanup(struct ichxrom_window *window)
+{
+	struct ichxrom_map_info *map, *scratch;
+	u16 word;
+
+	/* Disable writes through the rom window */
+	pci_read_config_word(window->pdev, BIOS_CNTL, &word);
+	pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1);
+
+	/* Free all of the mtd devices */
+	list_for_each_entry_safe(map, scratch, &window->maps, list) {
+		if (map->rsrc.parent)
+			release_resource(&map->rsrc);
+		del_mtd_device(map->mtd);
+		map_destroy(map->mtd);
+		list_del(&map->list);
+		kfree(map);
+	}
+	if (window->rsrc.parent)
+		release_resource(&window->rsrc);
+	if (window->virt) {
+		iounmap(window->virt);
+		window->virt = NULL;
+		window->phys = 0;
+		window->size = 0;
+		window->pdev = NULL;
+	}
+}
+
+
+static int __devinit ichxrom_init_one (struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+	struct ichxrom_window *window = &ichxrom_window;
+	struct ichxrom_map_info *map = NULL;
+	unsigned long map_top;
+	u8 byte;
+	u16 word;
+
+	/* For now I just handle the ichx and I assume there
+	 * are not a lot of resources up at the top of the address
+	 * space.  It is possible to handle other devices in the
+	 * top 16MB but it is very painful.  Also since
+	 * you can only really attach a FWH to an ICHX there
+	 * a number of simplifications you can make.
+	 *
+	 * Also you can page firmware hubs if an 8MB window isn't enough 
+	 * but don't currently handle that case either.
+	 */
+	window->pdev = pdev;
+
+	/* Find a region continuous to the end of the ROM window  */
+	window->phys = 0;
+	pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
+	if (byte == 0xff) {
+		window->phys = 0xffc00000;
+		pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
+		if ((byte & 0x0f) == 0x0f) {
+			window->phys = 0xff400000;
+		}
+		else if ((byte & 0x0e) == 0x0e) {
+			window->phys = 0xff500000;
+		}
+		else if ((byte & 0x0c) == 0x0c) {
+			window->phys = 0xff600000;
+		}
+		else if ((byte & 0x08) == 0x08) {
+			window->phys = 0xff700000;
+		}
+	}
+	else if ((byte & 0xfe) == 0xfe) {
+		window->phys = 0xffc80000;
+	}
+	else if ((byte & 0xfc) == 0xfc) {
+		window->phys = 0xffd00000;
+	}
+	else if ((byte & 0xf8) == 0xf8) {
+		window->phys = 0xffd80000;
+	}
+	else if ((byte & 0xf0) == 0xf0) {
+		window->phys = 0xffe00000;
+	}
+	else if ((byte & 0xe0) == 0xe0) {
+		window->phys = 0xffe80000;
+	}
+	else if ((byte & 0xc0) == 0xc0) {
+		window->phys = 0xfff00000;
+	}
+	else if ((byte & 0x80) == 0x80) {
+		window->phys = 0xfff80000; 
+	}
+
+	if (window->phys == 0) {
+		printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
+		goto out;
+	}
+	window->phys -= 0x400000UL;
+	window->size = (0xffffffffUL - window->phys) + 1UL;
+
+	/* Enable writes through the rom window */
+	pci_read_config_word(pdev, BIOS_CNTL, &word);
+	if (!(word & 1)  && (word & (1<<1))) {
+		/* The BIOS will generate an error if I enable
+		 * this device, so don't even try.
+		 */
+		printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
+		goto out;
+	}
+	pci_write_config_word(pdev, BIOS_CNTL, word | 1);
+
+	/*
+	 * Try to reserve the window mem region.  If this fails then
+	 * it is likely due to the window being "reseved" by the BIOS.
+	 */
+	window->rsrc.name = MOD_NAME;
+	window->rsrc.start = window->phys;
+	window->rsrc.end   = window->phys + window->size - 1;
+	window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, &window->rsrc)) {
+		window->rsrc.parent = NULL;
+		printk(KERN_DEBUG MOD_NAME
+			": %s(): Unable to register resource"
+			" 0x%.08lx-0x%.08lx - kernel bug?\n",
+			__func__,
+			window->rsrc.start, window->rsrc.end);
+	}
+
+	/* Map the firmware hub into my address space. */
+	window->virt = ioremap_nocache(window->phys, window->size);
+	if (!window->virt) {
+		printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+			window->phys, window->size);
+		goto out;
+	}
+
+	/* Get the first address to look for an rom chip at */
+	map_top = window->phys;
+	if ((window->phys & 0x3fffff) != 0) {
+		map_top = window->phys + 0x400000;
+	}
+#if 1
+	/* The probe sequence run over the firmware hub lock
+	 * registers sets them to 0x7 (no access).
+	 * Probe at most the last 4M of the address space.
+	 */
+	if (map_top < 0xffc00000) {
+		map_top = 0xffc00000;
+	}
+#endif
+	/* Loop through and look for rom chips */
+	while((map_top - 1) < 0xffffffffUL) {
+		struct cfi_private *cfi;
+		unsigned long offset;
+		int i;
+
+		if (!map) {
+			map = kmalloc(sizeof(*map), GFP_KERNEL);
+		}
+		if (!map) {
+			printk(KERN_ERR MOD_NAME ": kmalloc failed");
+			goto out;
+		}
+		memset(map, 0, sizeof(*map));
+		INIT_LIST_HEAD(&map->list);
+		map->map.name = map->map_name;
+		map->map.phys = map_top;
+		offset = map_top - window->phys;
+		map->map.virt = (void __iomem *)
+			(((unsigned long)(window->virt)) + offset);
+		map->map.size = 0xffffffffUL - map_top + 1UL;
+		/* Set the name of the map to the address I am trying */
+		sprintf(map->map_name, "%s @%08lx",
+			MOD_NAME, map->map.phys);
+
+		/* Firmware hubs only use vpp when being programmed
+		 * in a factory setting.  So in-place programming
+		 * needs to use a different method.
+		 */
+		for(map->map.bankwidth = 32; map->map.bankwidth; 
+			map->map.bankwidth >>= 1)
+		{
+			char **probe_type;
+			/* Skip bankwidths that are not supported */
+			if (!map_bankwidth_supported(map->map.bankwidth))
+				continue;
+
+			/* Setup the map methods */
+			simple_map_init(&map->map);
+
+			/* Try all of the probe methods */
+			probe_type = rom_probe_types;
+			for(; *probe_type; probe_type++) {
+				map->mtd = do_map_probe(*probe_type, &map->map);
+				if (map->mtd)
+					goto found;
+			}
+		}
+		map_top += ROM_PROBE_STEP_SIZE;
+		continue;
+	found:
+		/* Trim the size if we are larger than the map */
+		if (map->mtd->size > map->map.size) {
+			printk(KERN_WARNING MOD_NAME
+				" rom(%u) larger than window(%lu). fixing...\n",
+				map->mtd->size, map->map.size);
+			map->mtd->size = map->map.size;
+		}
+		if (window->rsrc.parent) {
+			/*
+			 * Registering the MTD device in iomem may not be possible
+			 * if there is a BIOS "reserved" and BUSY range.  If this
+			 * fails then continue anyway.
+			 */
+			map->rsrc.name  = map->map_name;
+			map->rsrc.start = map->map.phys;
+			map->rsrc.end   = map->map.phys + map->mtd->size - 1;
+			map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+			if (request_resource(&window->rsrc, &map->rsrc)) {
+				printk(KERN_ERR MOD_NAME
+					": cannot reserve MTD resource\n");
+				map->rsrc.parent = NULL;
+			}
+		}
+
+		/* Make the whole region visible in the map */
+		map->map.virt = window->virt;
+		map->map.phys = window->phys;
+		cfi = map->map.fldrv_priv;
+		for(i = 0; i < cfi->numchips; i++) {
+			cfi->chips[i].start += offset;
+		}
+		
+		/* Now that the mtd devices is complete claim and export it */
+		map->mtd->owner = THIS_MODULE;
+		if (add_mtd_device(map->mtd)) {
+			map_destroy(map->mtd);
+			map->mtd = NULL;
+			goto out;
+		}
+
+
+		/* Calculate the new value of map_top */
+		map_top += map->mtd->size;
+
+		/* File away the map structure */
+		list_add(&map->list, &window->maps);
+		map = NULL;
+	}
+
+ out:
+	/* Free any left over map structures */
+	if (map) {
+		kfree(map);
+	}
+	/* See if I have any map structures */
+	if (list_empty(&window->maps)) {
+		ichxrom_cleanup(window);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+
+static void __devexit ichxrom_remove_one (struct pci_dev *pdev)
+{
+	struct ichxrom_window *window = &ichxrom_window;
+	ichxrom_cleanup(window);
+}
+
+static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = {
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, 
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, 
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, 
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, ichxrom_pci_tbl);
+
+#if 0
+static struct pci_driver ichxrom_driver = {
+	.name =		MOD_NAME,
+	.id_table =	ichxrom_pci_tbl,
+	.probe =	ichxrom_init_one,
+	.remove =	ichxrom_remove_one,
+};
+#endif
+
+static int __init init_ichxrom(void)
+{
+	struct pci_dev *pdev;
+	struct pci_device_id *id;
+
+	pdev = NULL;
+	for (id = ichxrom_pci_tbl; id->vendor; id++) {
+		pdev = pci_find_device(id->vendor, id->device, NULL);
+		if (pdev) {
+			break;
+		}
+	}
+	if (pdev) {
+		return ichxrom_init_one(pdev, &ichxrom_pci_tbl[0]);
+	}
+	return -ENXIO;
+#if 0
+	return pci_module_init(&ichxrom_driver);
+#endif
+}
+
+static void __exit cleanup_ichxrom(void)
+{
+	ichxrom_remove_one(ichxrom_window.pdev);
+}
+
+module_init(init_ichxrom);
+module_exit(cleanup_ichxrom);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ICHX southbridge");
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
new file mode 100644
index 000000000000..cb39172c81d2
--- /dev/null
+++ b/drivers/mtd/maps/impa7.c
@@ -0,0 +1,161 @@
+/*
+ * $Id: impa7.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * Handle mapping of the NOR flash on implementa A7 boards
+ *
+ * Copyright 2002 SYSGO Real-Time Solutions GmbH
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/config.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
+#define WINDOW_ADDR0 0x00000000      /* physical properties of flash */
+#define WINDOW_SIZE0 0x00800000
+#define WINDOW_ADDR1 0x10000000      /* physical properties of flash */
+#define WINDOW_SIZE1 0x00800000
+#define NUM_FLASHBANKS 2
+#define BUSWIDTH     4
+
+/* can be { "cfi_probe", "jedec_probe", "map_rom", NULL } */
+#define PROBETYPES { "jedec_probe", NULL }
+
+#define MSG_PREFIX "impA7:"   /* prefix for our printk()'s */
+#define MTDID      "impa7-%d"  /* for mtdparts= partitioning */
+
+static struct mtd_info *impa7_mtd[NUM_FLASHBANKS];
+
+
+static struct map_info impa7_map[NUM_FLASHBANKS] = {
+	{
+		.name = "impA7 NOR Flash Bank #0",
+		.size = WINDOW_SIZE0,
+		.bankwidth = BUSWIDTH,
+	},
+	{
+		.name = "impA7 NOR Flash Bank #1",
+		.size = WINDOW_SIZE1,
+		.bankwidth = BUSWIDTH,
+	},
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+/*
+ * MTD partitioning stuff 
+ */
+static struct mtd_partition static_partitions[] =
+{
+	{
+		.name = "FileSystem",
+		.size = 0x800000,
+		.offset = 0x00000000
+	},
+};
+
+static int mtd_parts_nb[NUM_FLASHBANKS];
+static struct mtd_partition *mtd_parts[NUM_FLASHBANKS];
+
+#endif
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+int __init init_impa7(void)
+{
+	static const char *rom_probe_types[] = PROBETYPES;
+	const char **type;
+	const char *part_type = 0;
+	int i;
+	static struct { u_long addr; u_long size; } pt[NUM_FLASHBANKS] = {
+	  { WINDOW_ADDR0, WINDOW_SIZE0 },
+	  { WINDOW_ADDR1, WINDOW_SIZE1 },
+        };
+	int devicesfound = 0;
+
+	for(i=0; i<NUM_FLASHBANKS; i++)
+	{
+		printk(KERN_NOTICE MSG_PREFIX "probing 0x%08lx at 0x%08lx\n",
+		       pt[i].size, pt[i].addr);
+
+		impa7_map[i].phys = pt[i].addr;
+		impa7_map[i].virt = ioremap(pt[i].addr, pt[i].size);
+		if (!impa7_map[i].virt) {
+			printk(MSG_PREFIX "failed to ioremap\n");
+			return -EIO;
+		}
+		simple_map_init(&impa7_map[i]);
+
+		impa7_mtd[i] = 0;
+		type = rom_probe_types;
+		for(; !impa7_mtd[i] && *type; type++) {
+			impa7_mtd[i] = do_map_probe(*type, &impa7_map[i]);
+		}
+
+		if (impa7_mtd[i]) {
+			impa7_mtd[i]->owner = THIS_MODULE;
+			devicesfound++;
+#ifdef CONFIG_MTD_PARTITIONS
+			mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i], 
+							       probes,
+							       &mtd_parts[i], 
+							       0);
+			if (mtd_parts_nb[i] > 0) {
+				part_type = "command line";
+			} else {
+				mtd_parts[i] = static_partitions;
+				mtd_parts_nb[i] = ARRAY_SIZE(static_partitions);
+				part_type = "static";
+			}
+
+			printk(KERN_NOTICE MSG_PREFIX
+			       "using %s partition definition\n", 
+			       part_type);
+			add_mtd_partitions(impa7_mtd[i], 
+					   mtd_parts[i], mtd_parts_nb[i]);
+#else
+			add_mtd_device(impa7_mtd[i]);
+
+#endif
+		}
+		else 
+			iounmap((void *)impa7_map[i].virt);
+	}
+	return devicesfound == 0 ? -ENXIO : 0;
+}
+
+static void __exit cleanup_impa7(void)
+{
+	int i;
+	for (i=0; i<NUM_FLASHBANKS; i++) {
+		if (impa7_mtd[i]) {
+#ifdef CONFIG_MTD_PARTITIONS
+			del_mtd_partitions(impa7_mtd[i]);
+#else
+			del_mtd_device(impa7_mtd[i]);
+#endif
+			map_destroy(impa7_mtd[i]);
+			iounmap((void *)impa7_map[i].virt);
+			impa7_map[i].virt = 0;
+		}
+	}
+}
+
+module_init(init_impa7);
+module_exit(cleanup_impa7);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pavel Bartusek <pba@sysgo.de>");
+MODULE_DESCRIPTION("MTD map driver for implementa impA7");
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
new file mode 100644
index 000000000000..e39a98a0171c
--- /dev/null
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -0,0 +1,217 @@
+/*======================================================================
+
+    drivers/mtd/maps/integrator-flash.c: ARM Integrator flash map driver
+  
+    Copyright (C) 2000 ARM Limited
+    Copyright (C) 2003 Deep Blue Solutions Ltd.
+  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+  
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+  
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+  
+   This is access code for flashes using ARM's flash partitioning 
+   standards.
+
+   $Id: integrator-flash.c,v 1.18 2004/11/01 13:26:15 rmk Exp $
+
+======================================================================*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/flash.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_ARCH_P720T
+#define FLASH_BASE		(0x04000000)
+#define FLASH_SIZE		(64*1024*1024)
+#endif
+
+struct armflash_info {
+	struct flash_platform_data *plat;
+	struct resource		*res;
+	struct mtd_partition	*parts;
+	struct mtd_info		*mtd;
+	struct map_info		map;
+};
+
+static void armflash_set_vpp(struct map_info *map, int on)
+{
+	struct armflash_info *info = container_of(map, struct armflash_info, map);
+
+	if (info->plat && info->plat->set_vpp)
+		info->plat->set_vpp(on);
+}
+
+static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL };
+
+static int armflash_probe(struct device *_dev)
+{
+	struct platform_device *dev = to_platform_device(_dev);
+	struct flash_platform_data *plat = dev->dev.platform_data;
+	struct resource *res = dev->resource;
+	unsigned int size = res->end - res->start + 1;
+	struct armflash_info *info;
+	int err;
+	void __iomem *base;
+
+	info = kmalloc(sizeof(struct armflash_info), GFP_KERNEL);
+	if (!info) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	memset(info, 0, sizeof(struct armflash_info));
+
+	info->plat = plat;
+	if (plat && plat->init) {
+		err = plat->init();
+		if (err)
+			goto no_resource;
+	}
+
+	info->res = request_mem_region(res->start, size, "armflash");
+	if (!info->res) {
+		err = -EBUSY;
+		goto no_resource;
+	}
+
+	base = ioremap(res->start, size);
+	if (!base) {
+		err = -ENOMEM;
+		goto no_mem;
+	}
+
+	/*
+	 * look for CFI based flash parts fitted to this board
+	 */
+	info->map.size		= size;
+	info->map.bankwidth	= plat->width;
+	info->map.phys		= res->start;
+	info->map.virt		= base;
+	info->map.name		= dev->dev.bus_id;
+	info->map.set_vpp	= armflash_set_vpp;
+
+	simple_map_init(&info->map);
+
+	/*
+	 * Also, the CFI layer automatically works out what size
+	 * of chips we have, and does the necessary identification
+	 * for us automatically.
+	 */
+	info->mtd = do_map_probe(plat->map_name, &info->map);
+	if (!info->mtd) {
+		err = -ENXIO;
+		goto no_device;
+	}
+
+	info->mtd->owner = THIS_MODULE;
+
+	err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0);
+	if (err > 0) {
+		err = add_mtd_partitions(info->mtd, info->parts, err);
+		if (err)
+			printk(KERN_ERR
+			       "mtd partition registration failed: %d\n", err);
+	}
+
+	if (err == 0)
+		dev_set_drvdata(&dev->dev, info);
+
+	/*
+	 * If we got an error, free all resources.
+	 */
+	if (err < 0) {
+		if (info->mtd) {
+			del_mtd_partitions(info->mtd);
+			map_destroy(info->mtd);
+		}
+		if (info->parts)
+			kfree(info->parts);
+
+ no_device:
+		iounmap(base);
+ no_mem:
+		release_mem_region(res->start, size);
+ no_resource:
+		if (plat && plat->exit)
+			plat->exit();
+		kfree(info);
+	}
+ out:
+	return err;
+}
+
+static int armflash_remove(struct device *_dev)
+{
+	struct platform_device *dev = to_platform_device(_dev);
+	struct armflash_info *info = dev_get_drvdata(&dev->dev);
+
+	dev_set_drvdata(&dev->dev, NULL);
+
+	if (info) {
+		if (info->mtd) {
+			del_mtd_partitions(info->mtd);
+			map_destroy(info->mtd);
+		}
+		if (info->parts)
+			kfree(info->parts);
+
+		iounmap(info->map.virt);
+		release_resource(info->res);
+		kfree(info->res);
+
+		if (info->plat && info->plat->exit)
+			info->plat->exit();
+
+		kfree(info);
+	}
+
+	return 0;
+}
+
+static struct device_driver armflash_driver = {
+	.name		= "armflash",
+	.bus		= &platform_bus_type,
+	.probe		= armflash_probe,
+	.remove		= armflash_remove,
+};
+
+static int __init armflash_init(void)
+{
+	return driver_register(&armflash_driver);
+}
+
+static void __exit armflash_exit(void)
+{
+	driver_unregister(&armflash_driver);
+}
+
+module_init(armflash_init);
+module_exit(armflash_exit);
+
+MODULE_AUTHOR("ARM Ltd");
+MODULE_DESCRIPTION("ARM Integrator CFI map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
new file mode 100644
index 000000000000..712401810841
--- /dev/null
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -0,0 +1,464 @@
+/*
+ * Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based)
+ * 
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ * (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
+ * (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
+ * 
+ * $Id: ipaq-flash.c,v 1.3 2004/11/04 13:24:15 gleixner Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/errno.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#ifdef CONFIG_MTD_CONCAT
+#include <linux/mtd/concat.h>
+#endif
+
+#include <asm/hardware.h>
+#include <asm/arch-sa1100/h3600.h>
+#include <asm/io.h>
+
+
+#ifndef CONFIG_IPAQ_HANDHELD
+#error This is for iPAQ Handhelds only
+#endif
+#ifdef CONFIG_SA1100_JORNADA56X
+
+static void jornada56x_set_vpp(struct map_info *map, int vpp)
+{
+	if (vpp)
+		GPSR = GPIO_GPIO26;
+	else
+		GPCR = GPIO_GPIO26;
+	GPDR |= GPIO_GPIO26;
+}
+
+#endif
+
+#ifdef CONFIG_SA1100_JORNADA720
+
+static void jornada720_set_vpp(struct map_info *map, int vpp)
+{
+	if (vpp)
+		PPSR |= 0x80;
+	else
+		PPSR &= ~0x80;
+	PPDR |= 0x80;
+}
+
+#endif
+
+#define MAX_IPAQ_CS 2		/* Number of CS we are going to test */
+
+#define IPAQ_MAP_INIT(X) \
+	{ \
+		name:		"IPAQ flash " X, \
+	}
+
+
+static struct map_info ipaq_map[MAX_IPAQ_CS] = {
+	IPAQ_MAP_INIT("bank 1"),
+	IPAQ_MAP_INIT("bank 2")
+};
+
+static struct mtd_info *my_sub_mtd[MAX_IPAQ_CS] = {
+	NULL,
+	NULL
+};
+
+/*
+ * Here are partition information for all known IPAQ-based devices.
+ * See include/linux/mtd/partitions.h for definition of the mtd_partition
+ * structure.
+ *
+ * The *_max_flash_size is the maximum possible mapped flash size which
+ * is not necessarily the actual flash size.  It must be no more than
+ * the value specified in the "struct map_desc *_io_desc" mapping
+ * definition for the corresponding machine.
+ *
+ * Please keep these in alphabetical order, and formatted as per existing
+ * entries.  Thanks.
+ */
+
+#ifdef CONFIG_IPAQ_HANDHELD
+static unsigned long h3xxx_max_flash_size = 0x04000000;
+static struct mtd_partition h3xxx_partitions[] = {
+	{
+		name:		"H3XXX boot firmware",
+#ifndef CONFIG_LAB
+		size:		0x00040000,
+#else
+		size:		0x00080000,
+#endif
+		offset:		0,
+#ifndef CONFIG_LAB
+		mask_flags:	MTD_WRITEABLE,  /* force read-only */
+#endif
+	}, 
+	{
+		name:		"H3XXX root jffs2",
+#ifndef CONFIG_LAB
+		size:		0x2000000 - 2*0x40000, /* Warning, this is fixed later */
+		offset:		0x00040000,
+#else
+		size:		0x2000000 - 0x40000 - 0x80000, /* Warning, this is fixed later */
+		offset:		0x00080000,
+#endif
+	},
+	{
+		name:		"asset",
+		size:		0x40000,
+		offset:		0x2000000 - 0x40000, /* Warning, this is fixed later */
+		mask_flags:	MTD_WRITEABLE,  /* force read-only */
+	}
+};
+
+#ifndef CONFIG_MTD_CONCAT
+static struct mtd_partition h3xxx_partitions_bank2[] = {
+	/* this is used only on 2 CS machines when concat is not present */
+	{
+		name:		"second H3XXX root jffs2",
+		size:		0x1000000 - 0x40000, /* Warning, this is fixed later */
+		offset:		0x00000000,
+	},
+	{
+		name:		"second asset",
+		size:		0x40000,
+		offset:		0x1000000 - 0x40000, /* Warning, this is fixed later */
+		mask_flags:	MTD_WRITEABLE,  /* force read-only */
+	}
+};
+#endif
+
+static DEFINE_SPINLOCK(ipaq_vpp_lock);
+
+static void h3xxx_set_vpp(struct map_info *map, int vpp)
+{
+	static int nest = 0;
+	
+	spin_lock(&ipaq_vpp_lock);
+	if (vpp)
+		nest++;
+	else
+		nest--;
+	if (nest)
+		assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 1);
+	else
+		assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 0);
+	spin_unlock(&ipaq_vpp_lock);
+}
+
+#endif
+
+#if defined(CONFIG_SA1100_JORNADA56X) || defined(CONFIG_SA1100_JORNADA720)
+static unsigned long jornada_max_flash_size = 0x02000000;
+static struct mtd_partition jornada_partitions[] = {
+	{
+		name:		"Jornada boot firmware",
+		size:		0x00040000,
+		offset:		0,
+		mask_flags:	MTD_WRITEABLE,  /* force read-only */
+	}, {
+		name:		"Jornada root jffs2",
+		size:		MTDPART_SIZ_FULL,
+		offset:		0x00040000,
+	}
+};
+#endif
+
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *mymtd;
+
+static unsigned long cs_phys[] = {
+#ifdef CONFIG_ARCH_SA1100
+	SA1100_CS0_PHYS,
+	SA1100_CS1_PHYS,
+	SA1100_CS2_PHYS,
+	SA1100_CS3_PHYS,
+	SA1100_CS4_PHYS,
+	SA1100_CS5_PHYS,
+#else 
+	PXA_CS0_PHYS,
+	PXA_CS1_PHYS,
+	PXA_CS2_PHYS,
+	PXA_CS3_PHYS,
+	PXA_CS4_PHYS,
+	PXA_CS5_PHYS,
+#endif
+};
+
+static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static int __init h1900_special_case(void);
+
+int __init ipaq_mtd_init(void)
+{
+	struct mtd_partition *parts = NULL;
+	int nb_parts = 0;
+	int parsed_nr_parts = 0;
+	const char *part_type;
+	int i; /* used when we have >1 flash chips */
+	unsigned long tot_flashsize = 0; /* used when we have >1 flash chips */
+
+	/* Default flash bankwidth */
+	// ipaq_map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
+	
+	if (machine_is_h1900())
+	{
+		/* For our intents, the h1900 is not a real iPAQ, so we special-case it. */
+		return h1900_special_case();
+	}
+
+	if (machine_is_h3100() || machine_is_h1900())
+		for(i=0; i<MAX_IPAQ_CS; i++)
+			ipaq_map[i].bankwidth = 2;
+	else
+		for(i=0; i<MAX_IPAQ_CS; i++)
+			ipaq_map[i].bankwidth = 4;
+			
+	/*
+	 * Static partition definition selection
+	 */
+	part_type = "static";
+
+	simple_map_init(&ipaq_map[0]);
+	simple_map_init(&ipaq_map[1]);
+
+#ifdef CONFIG_IPAQ_HANDHELD
+	if (machine_is_ipaq()) {
+		parts = h3xxx_partitions;
+		nb_parts = ARRAY_SIZE(h3xxx_partitions);
+		for(i=0; i<MAX_IPAQ_CS; i++) {
+			ipaq_map[i].size = h3xxx_max_flash_size;
+			ipaq_map[i].set_vpp = h3xxx_set_vpp;
+			ipaq_map[i].phys = cs_phys[i];
+			ipaq_map[i].virt = __ioremap(cs_phys[i], 0x04000000, 0, 1);
+			if (machine_is_h3100 () || machine_is_h1900())
+				ipaq_map[i].bankwidth = 2;
+		}
+		if (machine_is_h3600()) {
+			/* No asset partition here */
+			h3xxx_partitions[1].size += 0x40000;
+			nb_parts--;
+		}
+	}
+#endif
+#ifdef CONFIG_ARCH_H5400
+	if (machine_is_h5400()) {
+		ipaq_map[0].size = 0x02000000;
+		ipaq_map[1].size = 0x02000000;
+		ipaq_map[1].phys = 0x02000000;
+		ipaq_map[1].virt = ipaq_map[0].virt + 0x02000000;
+	}
+#endif
+#ifdef CONFIG_ARCH_H1900
+	if (machine_is_h1900()) {
+		ipaq_map[0].size = 0x00400000;
+		ipaq_map[1].size = 0x02000000;
+		ipaq_map[1].phys = 0x00080000;
+		ipaq_map[1].virt = ipaq_map[0].virt + 0x00080000;
+	}
+#endif
+
+#ifdef CONFIG_SA1100_JORNADA56X
+	if (machine_is_jornada56x()) {
+		parts = jornada_partitions;
+		nb_parts = ARRAY_SIZE(jornada_partitions);
+		ipaq_map[0].size = jornada_max_flash_size;
+		ipaq_map[0].set_vpp = jornada56x_set_vpp;
+		ipaq_map[0].virt = (__u32)__ioremap(0x0, 0x04000000, 0, 1);
+	}
+#endif
+#ifdef CONFIG_SA1100_JORNADA720
+	if (machine_is_jornada720()) {
+		parts = jornada_partitions;
+		nb_parts = ARRAY_SIZE(jornada_partitions);
+		ipaq_map[0].size = jornada_max_flash_size;
+		ipaq_map[0].set_vpp = jornada720_set_vpp;
+	}
+#endif
+
+
+	if (machine_is_ipaq()) { /* for iPAQs only */
+		for(i=0; i<MAX_IPAQ_CS; i++) {
+			printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with CFI.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
+			my_sub_mtd[i] = do_map_probe("cfi_probe", &ipaq_map[i]);
+			if (!my_sub_mtd[i]) {
+				printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
+				my_sub_mtd[i] = do_map_probe("jedec_probe", &ipaq_map[i]);
+			}
+			if (!my_sub_mtd[i]) {
+				printk(KERN_NOTICE "iPAQ flash: failed to find flash.\n");
+				if (i)
+					break;
+				else
+					return -ENXIO;
+			} else
+				printk(KERN_NOTICE "iPAQ flash: found %d bytes\n", my_sub_mtd[i]->size);
+			
+			/* do we really need this debugging? --joshua 20030703 */
+			// printk("my_sub_mtd[%d]=%p\n", i, my_sub_mtd[i]);
+			my_sub_mtd[i]->owner = THIS_MODULE;
+			tot_flashsize += my_sub_mtd[i]->size;
+		}
+#ifdef CONFIG_MTD_CONCAT
+		/* fix the asset location */
+#	ifdef CONFIG_LAB
+		h3xxx_partitions[1].size = tot_flashsize - 0x40000 - 0x80000 /* extra big boot block */;
+#	else
+		h3xxx_partitions[1].size = tot_flashsize - 2 * 0x40000;
+#	endif
+		h3xxx_partitions[2].offset = tot_flashsize - 0x40000;
+		/* and concat the devices */
+		mymtd = mtd_concat_create(&my_sub_mtd[0], i,
+					  "ipaq");
+		if (!mymtd) {
+			printk("Cannot create iPAQ concat device\n");
+			return -ENXIO;
+		}
+#else
+		mymtd = my_sub_mtd[0];
+
+		/* 
+		 *In the very near future, command line partition parsing
+		 * will use the device name as 'mtd-id' instead of a value
+		 * passed to the parse_cmdline_partitions() routine. Since
+		 * the bootldr says 'ipaq', make sure it continues to work. 
+		 */
+		mymtd->name = "ipaq";
+
+		if ((machine_is_h3600())) {
+#	ifdef CONFIG_LAB
+			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x80000;
+#	else
+			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000;
+#	endif
+			nb_parts = 2;
+		} else {
+#	ifdef CONFIG_LAB
+			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000 - 0x80000; /* extra big boot block */
+#	else
+			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 2*0x40000;
+#	endif
+			h3xxx_partitions[2].offset = my_sub_mtd[0]->size - 0x40000;
+		}
+
+		if (my_sub_mtd[1]) {
+#	ifdef CONFIG_LAB
+			h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x80000;
+#	else
+			h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x40000;
+#	endif
+			h3xxx_partitions_bank2[1].offset = my_sub_mtd[1]->size - 0x40000;
+		}
+#endif
+	}
+	else {
+		/*
+		 * Now let's probe for the actual flash.  Do it here since
+		 * specific machine settings might have been set above.
+		 */
+		printk(KERN_NOTICE "IPAQ flash: probing %d-bit flash bus, window=%lx\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
+		mymtd = do_map_probe("cfi_probe", &ipaq_map[0]);
+		if (!mymtd)
+			return -ENXIO;
+		mymtd->owner = THIS_MODULE;
+	}
+
+
+	/*
+	 * Dynamic partition selection stuff (might override the static ones)
+	 */
+
+	 i = parse_mtd_partitions(mymtd, part_probes, &parsed_parts, 0);
+			
+	 if (i > 0) {
+		 nb_parts = parsed_nr_parts = i;
+		 parts = parsed_parts;
+		 part_type = "dynamic";
+	 }
+
+	 if (!parts) {
+		 printk(KERN_NOTICE "IPAQ flash: no partition info available, registering whole flash at once\n");
+		 add_mtd_device(mymtd);
+#ifndef CONFIG_MTD_CONCAT
+		 if (my_sub_mtd[1])
+			 add_mtd_device(my_sub_mtd[1]);
+#endif
+	 } else {
+		 printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+		 add_mtd_partitions(mymtd, parts, nb_parts);
+#ifndef CONFIG_MTD_CONCAT
+		 if (my_sub_mtd[1])
+			 add_mtd_partitions(my_sub_mtd[1], h3xxx_partitions_bank2, ARRAY_SIZE(h3xxx_partitions_bank2));
+#endif
+	 }
+
+	 return 0;
+}
+
+static void __exit ipaq_mtd_cleanup(void)
+{
+	int i;
+
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+#ifndef CONFIG_MTD_CONCAT
+		if (my_sub_mtd[1])
+			del_mtd_partitions(my_sub_mtd[1]);
+#endif
+		map_destroy(mymtd);
+#ifdef CONFIG_MTD_CONCAT
+		for(i=0; i<MAX_IPAQ_CS; i++) 
+#else
+			for(i=1; i<MAX_IPAQ_CS; i++) 
+#endif		  
+			{
+				if (my_sub_mtd[i])
+					map_destroy(my_sub_mtd[i]);
+			}
+		if (parsed_parts)
+			kfree(parsed_parts);
+	}
+}
+
+static int __init h1900_special_case(void)
+{
+	/* The iPAQ h1900 is a special case - it has weird ROM. */
+	simple_map_init(&ipaq_map[0]);
+	ipaq_map[0].size = 0x80000;
+	ipaq_map[0].set_vpp = h3xxx_set_vpp;
+	ipaq_map[0].phys = 0x0;
+	ipaq_map[0].virt = __ioremap(0x0, 0x04000000, 0, 1);
+	ipaq_map[0].bankwidth = 2;
+	
+	printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
+	mymtd = do_map_probe("jedec_probe", &ipaq_map[0]);
+	if (!mymtd)
+		return -ENODEV;
+	add_mtd_device(mymtd);
+	printk(KERN_NOTICE "iPAQ flash: registered h1910 flash\n");
+	
+	return 0;
+}
+
+module_init(ipaq_mtd_init);
+module_exit(ipaq_mtd_cleanup);
+
+MODULE_AUTHOR("Jamey Hicks");
+MODULE_DESCRIPTION("IPAQ CFI map driver");
+MODULE_LICENSE("MIT");
diff --git a/drivers/mtd/maps/iq80310.c b/drivers/mtd/maps/iq80310.c
new file mode 100644
index 000000000000..558d014e7acc
--- /dev/null
+++ b/drivers/mtd/maps/iq80310.c
@@ -0,0 +1,119 @@
+/*
+ * $Id: iq80310.c,v 1.20 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * Mapping for the Intel XScale IQ80310 evaluation board
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+
+#define WINDOW_ADDR 	0
+#define WINDOW_SIZE 	8*1024*1024
+#define BUSWIDTH 	1
+
+static struct mtd_info *mymtd;
+
+static struct map_info iq80310_map = {
+	.name = "IQ80310 flash",
+	.size = WINDOW_SIZE,
+	.bankwidth = BUSWIDTH,
+	.phys = WINDOW_ADDR
+};
+
+static struct mtd_partition iq80310_partitions[4] = {
+	{
+		.name =		"Firmware",
+		.size =		0x00080000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x000a0000,
+		.offset =	0x00080000,
+	},{
+		.name =		"Filesystem",
+		.size =		0x00600000,
+		.offset =	0x00120000
+	},{
+		.name =		"RedBoot",
+		.size =		0x000e0000,
+		.offset =	0x00720000,
+		.mask_flags =	MTD_WRITEABLE
+	}
+};
+
+static struct mtd_info *mymtd;
+static struct mtd_partition *parsed_parts;
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+static int __init init_iq80310(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	int parsed_nr_parts = 0;
+	int ret;
+
+	iq80310_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
+	if (!iq80310_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	simple_map_init(&iq80310_map);
+
+	mymtd = do_map_probe("cfi_probe", &iq80310_map);
+	if (!mymtd) {
+		iounmap((void *)iq80310_map.virt);
+		return -ENXIO;
+	}
+	mymtd->owner = THIS_MODULE;
+
+	ret = parse_mtd_partitions(mymtd, probes, &parsed_parts, 0);
+
+	if (ret > 0)
+		parsed_nr_parts = ret;
+
+	if (parsed_nr_parts > 0) {
+		parts = parsed_parts;
+		nb_parts = parsed_nr_parts;
+	} else {
+		parts = iq80310_partitions;
+		nb_parts = ARRAY_SIZE(iq80310_partitions);
+	}
+	add_mtd_partitions(mymtd, parts, nb_parts);
+	return 0;
+}
+
+static void __exit cleanup_iq80310(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+		if (parsed_parts)
+			kfree(parsed_parts);
+	}
+	if (iq80310_map.virt)
+		iounmap((void *)iq80310_map.virt);
+}
+
+module_init(init_iq80310);
+module_exit(cleanup_iq80310);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_DESCRIPTION("MTD map driver for Intel XScale IQ80310 evaluation board");
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
new file mode 100644
index 000000000000..c5b5f447e34b
--- /dev/null
+++ b/drivers/mtd/maps/ixp2000.c
@@ -0,0 +1,280 @@
+/*
+ * $Id: ixp2000.c,v 1.5 2004/11/16 17:15:48 dsaxena Exp $
+ *
+ * drivers/mtd/maps/ixp2000.c
+ *
+ * Mapping for the Intel XScale IXP2000 based systems
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * 
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/flash.h>
+
+#include <linux/reboot.h>
+
+struct ixp2000_flash_info {
+	struct		mtd_info *mtd;
+	struct		map_info map;
+	struct		mtd_partition *partitions;
+	struct		resource *res;
+	int		nr_banks;
+};
+
+static inline unsigned long flash_bank_setup(struct map_info *map, unsigned long ofs)
+{	
+	unsigned long (*set_bank)(unsigned long) = 
+		(unsigned long(*)(unsigned long))map->map_priv_2;
+
+	return (set_bank ? set_bank(ofs) : ofs);
+}
+
+#ifdef __ARMEB__
+/*
+ * Rev A0 and A1 of IXP2400 silicon have a broken addressing unit which 
+ * causes the lower address bits to be XORed with 0x11 on 8 bit accesses 
+ * and XORed with 0x10 on 16 bit accesses. See the spec update, erratum 44.
+ */
+static int erratum44_workaround = 0;
+
+static inline unsigned long address_fix8_write(unsigned long addr)
+{
+	if (erratum44_workaround) {
+		return (addr ^ 3);
+	}
+	return addr;
+}
+#else
+
+#define address_fix8_write(x)	(x)
+#endif
+
+static map_word ixp2000_flash_read8(struct map_info *map, unsigned long ofs)
+{
+	map_word val;
+
+	val.x[0] =  *((u8 *)(map->map_priv_1 + flash_bank_setup(map, ofs)));
+	return val;
+}
+
+/*
+ * We can't use the standard memcpy due to the broken SlowPort
+ * address translation on rev A0 and A1 silicon and the fact that
+ * we have banked flash.
+ */
+static void ixp2000_flash_copy_from(struct map_info *map, void *to,
+			      unsigned long from, ssize_t len)
+{
+	from = flash_bank_setup(map, from);
+	while(len--) 
+		*(__u8 *) to++ = *(__u8 *)(map->map_priv_1 + from++);
+}
+
+static void ixp2000_flash_write8(struct map_info *map, map_word d, unsigned long ofs)
+{
+	*(__u8 *) (address_fix8_write(map->map_priv_1 +
+				      flash_bank_setup(map, ofs))) = d.x[0];
+}
+
+static void ixp2000_flash_copy_to(struct map_info *map, unsigned long to,
+			    const void *from, ssize_t len)
+{
+	to = flash_bank_setup(map, to);
+	while(len--) {
+		unsigned long tmp = address_fix8_write(map->map_priv_1 + to++);
+		*(__u8 *)(tmp) = *(__u8 *)(from++);
+	}
+}
+
+
+static int ixp2000_flash_remove(struct device *_dev)
+{
+	struct platform_device *dev = to_platform_device(_dev);
+	struct flash_platform_data *plat = dev->dev.platform_data;
+	struct ixp2000_flash_info *info = dev_get_drvdata(&dev->dev);
+
+	dev_set_drvdata(&dev->dev, NULL);
+
+	if(!info)
+		return 0;
+
+	if (info->mtd) {
+		del_mtd_partitions(info->mtd);
+		map_destroy(info->mtd);
+	}
+	if (info->map.map_priv_1)
+		iounmap((void *) info->map.map_priv_1);
+
+	if (info->partitions) {
+		kfree(info->partitions); }
+
+	if (info->res) {
+		release_resource(info->res);
+		kfree(info->res);
+	}
+
+	if (plat->exit)
+		plat->exit();
+
+	return 0;
+}
+
+
+static int ixp2000_flash_probe(struct device *_dev)
+{
+	static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+	struct platform_device *dev = to_platform_device(_dev);
+	struct ixp2000_flash_data *ixp_data = dev->dev.platform_data;
+	struct flash_platform_data *plat; 
+	struct ixp2000_flash_info *info;
+	unsigned long window_size;
+	int err = -1;
+	
+	if (!ixp_data)
+		return -ENODEV;
+
+	plat = ixp_data->platform_data;
+	if (!plat)
+		return -ENODEV;
+
+	window_size = dev->resource->end - dev->resource->start + 1;
+	dev_info(_dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n", 
+			ixp_data->nr_banks, ((u32)window_size >> 20));
+
+	if (plat->width != 1) {
+		dev_err(_dev, "IXP2000 MTD map only supports 8-bit mode, asking for %d\n",
+				plat->width * 8);
+		return -EIO;
+	}
+
+	info = kmalloc(sizeof(struct ixp2000_flash_info), GFP_KERNEL);
+	if(!info) {
+		err = -ENOMEM;
+		goto Error;
+	}	
+	memzero(info, sizeof(struct ixp2000_flash_info));
+
+	dev_set_drvdata(&dev->dev, info);
+
+	/*
+	 * Tell the MTD layer we're not 1:1 mapped so that it does
+	 * not attempt to do a direct access on us.
+	 */
+	info->map.phys = NO_XIP;
+	
+	info->nr_banks = ixp_data->nr_banks;
+	info->map.size = ixp_data->nr_banks * window_size;
+	info->map.bankwidth = 1;
+
+	/*
+ 	 * map_priv_2 is used to store a ptr to to the bank_setup routine
+ 	 */
+	info->map.map_priv_2 = (void __iomem *) ixp_data->bank_setup;
+
+	info->map.name = dev->dev.bus_id;
+	info->map.read = ixp2000_flash_read8;
+	info->map.write = ixp2000_flash_write8;
+	info->map.copy_from = ixp2000_flash_copy_from;
+	info->map.copy_to = ixp2000_flash_copy_to;
+
+	info->res = request_mem_region(dev->resource->start, 
+			dev->resource->end - dev->resource->start + 1, 
+			dev->dev.bus_id);
+	if (!info->res) {
+		dev_err(_dev, "Could not reserve memory region\n");
+		err = -ENOMEM;
+		goto Error;
+	}
+
+	info->map.map_priv_1 = ioremap(dev->resource->start, 
+			    	dev->resource->end - dev->resource->start + 1);
+	if (!info->map.map_priv_1) {
+		dev_err(_dev, "Failed to ioremap flash region\n");
+		err = -EIO;
+		goto Error;
+	}
+
+	/*
+	 * Setup read mode for FLASH
+	 */
+	*IXP2000_SLOWPORT_FRM = 1;
+
+#if defined(__ARMEB__)
+	/*
+	 * Enable erratum 44 workaround for NPUs with broken slowport
+	 */
+
+	erratum44_workaround = ixp2000_has_broken_slowport();
+	dev_info(_dev, "Erratum 44 workaround %s\n",
+	       erratum44_workaround ? "enabled" : "disabled");
+#endif
+
+	info->mtd = do_map_probe(plat->map_name, &info->map);
+	if (!info->mtd) {
+		dev_err(_dev, "map_probe failed\n");
+		err = -ENXIO;
+		goto Error;
+	}
+	info->mtd->owner = THIS_MODULE;
+
+	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
+	if (err > 0) {
+		err = add_mtd_partitions(info->mtd, info->partitions, err);
+		if(err)
+			dev_err(_dev, "Could not parse partitions\n");
+	}
+
+	if (err)
+		goto Error;
+
+	return 0;
+
+Error:
+	ixp2000_flash_remove(_dev);
+	return err;
+}
+
+static struct device_driver ixp2000_flash_driver = {
+	.name		= "IXP2000-Flash",
+	.bus		= &platform_bus_type,
+	.probe		= &ixp2000_flash_probe,
+	.remove		= &ixp2000_flash_remove
+};
+
+static int __init ixp2000_flash_init(void)
+{
+	return driver_register(&ixp2000_flash_driver);
+}
+
+static void __exit ixp2000_flash_exit(void)
+{
+	driver_unregister(&ixp2000_flash_driver);
+}
+
+module_init(ixp2000_flash_init);
+module_exit(ixp2000_flash_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
+
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
new file mode 100644
index 000000000000..5afe660aa2c4
--- /dev/null
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -0,0 +1,259 @@
+/*
+ * $Id: ixp4xx.c,v 1.7 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * drivers/mtd/maps/ixp4xx.c
+ *
+ * MTD Map file for IXP4XX based systems. Please do not make per-board
+ * changes in here. If your board needs special setup, do it in your
+ * platform level code in arch/arm/mach-ixp4xx/board-setup.c
+ *
+ * Original Author: Intel Corporation
+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2002 Intel Corporation
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/flash.h>
+
+#include <linux/reboot.h>
+
+#ifndef __ARMEB__
+#define	BYTE0(h)	((h) & 0xFF)
+#define	BYTE1(h)	(((h) >> 8) & 0xFF)
+#else
+#define	BYTE0(h)	(((h) >> 8) & 0xFF)
+#define	BYTE1(h)	((h) & 0xFF)
+#endif
+
+static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
+{
+	map_word val;
+	val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
+	return val;
+}
+
+/*
+ * The IXP4xx expansion bus only allows 16-bit wide acceses
+ * when attached to a 16-bit wide device (such as the 28F128J3A),
+ * so we can't just memcpy_fromio().
+ */
+static void ixp4xx_copy_from(struct map_info *map, void *to,
+			     unsigned long from, ssize_t len)
+{
+	int i;
+	u8 *dest = (u8 *) to;
+	u16 *src = (u16 *) (map->map_priv_1 + from);
+	u16 data;
+
+	for (i = 0; i < (len / 2); i++) {
+		data = src[i];
+		dest[i * 2] = BYTE0(data);
+		dest[i * 2 + 1] = BYTE1(data);
+	}
+
+	if (len & 1)
+		dest[len - 1] = BYTE0(src[i]);
+}
+
+/* 
+ * Unaligned writes are ignored, causing the 8-bit
+ * probe to fail and proceed to the 16-bit probe (which succeeds).
+ */
+static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+	if (!(adr & 1))
+	       *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+}
+
+/* 
+ * Fast write16 function without the probing check above
+ */
+static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+       *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+}
+
+struct ixp4xx_flash_info {
+	struct mtd_info *mtd;
+	struct map_info map;
+	struct mtd_partition *partitions;
+	struct resource *res;
+};
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+static int ixp4xx_flash_remove(struct device *_dev)
+{
+	struct platform_device *dev = to_platform_device(_dev);
+	struct flash_platform_data *plat = dev->dev.platform_data;
+	struct ixp4xx_flash_info *info = dev_get_drvdata(&dev->dev);
+	map_word d;
+
+	dev_set_drvdata(&dev->dev, NULL);
+
+	if(!info)
+		return 0;
+
+	/*
+	 * This is required for a soft reboot to work.
+	 */
+	d.x[0] = 0xff;
+	ixp4xx_write16(&info->map, d, 0x55 * 0x2);
+
+	if (info->mtd) {
+		del_mtd_partitions(info->mtd);
+		map_destroy(info->mtd);
+	}
+	if (info->map.map_priv_1)
+		iounmap((void *) info->map.map_priv_1);
+
+	if (info->partitions)
+		kfree(info->partitions);
+
+	if (info->res) {
+		release_resource(info->res);
+		kfree(info->res);
+	}
+
+	if (plat->exit)
+		plat->exit();
+
+	/* Disable flash write */
+	*IXP4XX_EXP_CS0 &= ~IXP4XX_FLASH_WRITABLE;
+
+	return 0;
+}
+
+static int ixp4xx_flash_probe(struct device *_dev)
+{
+	struct platform_device *dev = to_platform_device(_dev);
+	struct flash_platform_data *plat = dev->dev.platform_data;
+	struct ixp4xx_flash_info *info;
+	int err = -1;
+
+	if (!plat)
+		return -ENODEV;
+
+	if (plat->init) {
+		err = plat->init();
+		if (err)
+			return err;
+	}
+
+	info = kmalloc(sizeof(struct ixp4xx_flash_info), GFP_KERNEL);
+	if(!info) {
+		err = -ENOMEM;
+		goto Error;
+	}	
+	memzero(info, sizeof(struct ixp4xx_flash_info));
+
+	dev_set_drvdata(&dev->dev, info);
+
+	/* 
+	 * Enable flash write 
+	 * TODO: Move this out to board specific code
+	 */
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+
+	/*
+	 * Tell the MTD layer we're not 1:1 mapped so that it does
+	 * not attempt to do a direct access on us.
+	 */
+	info->map.phys = NO_XIP;
+	info->map.size = dev->resource->end - dev->resource->start + 1;
+
+	/*
+	 * We only support 16-bit accesses for now. If and when
+	 * any board use 8-bit access, we'll fixup the driver to
+	 * handle that.
+	 */
+	info->map.bankwidth = 2;
+	info->map.name = dev->dev.bus_id;
+	info->map.read = ixp4xx_read16,
+	info->map.write = ixp4xx_probe_write16,
+	info->map.copy_from = ixp4xx_copy_from,
+
+	info->res = request_mem_region(dev->resource->start, 
+			dev->resource->end - dev->resource->start + 1, 
+			"IXP4XXFlash");
+	if (!info->res) {
+		printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n");
+		err = -ENOMEM;
+		goto Error;
+	}
+
+	info->map.map_priv_1 = ioremap(dev->resource->start,
+			    dev->resource->end - dev->resource->start + 1);
+	if (!info->map.map_priv_1) {
+		printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n");
+		err = -EIO;
+		goto Error;
+	}
+
+	info->mtd = do_map_probe(plat->map_name, &info->map);
+	if (!info->mtd) {
+		printk(KERN_ERR "IXP4XXFlash: map_probe failed\n");
+		err = -ENXIO;
+		goto Error;
+	}
+	info->mtd->owner = THIS_MODULE;
+	
+	/* Use the fast version */
+	info->map.write = ixp4xx_write16,
+
+	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
+	if (err > 0) {
+		err = add_mtd_partitions(info->mtd, info->partitions, err);
+		if(err)
+			printk(KERN_ERR "Could not parse partitions\n");
+	}
+
+	if (err)
+		goto Error;
+
+	return 0;
+
+Error:
+	ixp4xx_flash_remove(_dev);
+	return err;
+}
+
+static struct device_driver ixp4xx_flash_driver = {
+	.name		= "IXP4XX-Flash",
+	.bus		= &platform_bus_type,
+	.probe		= ixp4xx_flash_probe,
+	.remove		= ixp4xx_flash_remove,
+};
+
+static int __init ixp4xx_flash_init(void)
+{
+	return driver_register(&ixp4xx_flash_driver);
+}
+
+static void __exit ixp4xx_flash_exit(void)
+{
+	driver_unregister(&ixp4xx_flash_driver);
+}
+
+
+module_init(ixp4xx_flash_init);
+module_exit(ixp4xx_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems")
+MODULE_AUTHOR("Deepak Saxena");
+
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
new file mode 100644
index 000000000000..b08668212ab7
--- /dev/null
+++ b/drivers/mtd/maps/l440gx.c
@@ -0,0 +1,157 @@
+/*
+ * $Id: l440gx.c,v 1.17 2004/11/28 09:40:39 dwmw2 Exp $
+ *
+ * BIOS Flash chip on Intel 440GX board.
+ *
+ * Bugs this currently does not work under linuxBIOS.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/config.h>
+
+#define PIIXE_IOBASE_RESOURCE	11
+
+#define WINDOW_ADDR 0xfff00000
+#define WINDOW_SIZE 0x00100000
+#define BUSWIDTH 1
+
+static u32 iobase;
+#define IOBASE iobase
+#define TRIBUF_PORT (IOBASE+0x37)
+#define VPP_PORT (IOBASE+0x28)
+
+static struct mtd_info *mymtd;
+
+
+/* Is this really the vpp port? */
+static void l440gx_set_vpp(struct map_info *map, int vpp)
+{
+	unsigned long l;
+
+	l = inl(VPP_PORT);
+	if (vpp) {
+		l |= 1;
+	} else {
+		l &= ~1;
+	}
+	outl(l, VPP_PORT);
+}
+
+static struct map_info l440gx_map = {
+	.name = "L440GX BIOS",
+	.size = WINDOW_SIZE,
+	.bankwidth = BUSWIDTH,
+	.phys = WINDOW_ADDR,
+#if 0
+	/* FIXME verify that this is the 
+	 * appripriate code for vpp enable/disable
+	 */
+	.set_vpp = l440gx_set_vpp
+#endif
+};
+
+static int __init init_l440gx(void)
+{
+	struct pci_dev *dev, *pm_dev;
+	struct resource *pm_iobase;
+	__u16 word;
+
+	dev = pci_find_device(PCI_VENDOR_ID_INTEL, 
+		PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
+
+	pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL, 
+		PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
+
+	if (!dev || !pm_dev) {
+		printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n");
+		return -ENODEV;
+	}
+
+	l440gx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
+
+	if (!l440gx_map.virt) {
+		printk(KERN_WARNING "Failed to ioremap L440GX flash region\n");
+		return -ENOMEM;
+	}
+	simple_map_init(&l440gx_map);
+	printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt);
+
+	/* Setup the pm iobase resource 
+	 * This code should move into some kind of generic bridge
+	 * driver but for the moment I'm content with getting the
+	 * allocation correct. 
+	 */
+	pm_iobase = &pm_dev->resource[PIIXE_IOBASE_RESOURCE];
+	if (!(pm_iobase->flags & IORESOURCE_IO)) {
+		pm_iobase->name = "pm iobase";
+		pm_iobase->start = 0;
+		pm_iobase->end = 63;
+		pm_iobase->flags = IORESOURCE_IO;
+
+		/* Put the current value in the resource */
+		pci_read_config_dword(pm_dev, 0x40, &iobase);
+		iobase &= ~1;
+		pm_iobase->start += iobase & ~1;
+		pm_iobase->end += iobase & ~1;
+
+		/* Allocate the resource region */
+		if (pci_assign_resource(pm_dev, PIIXE_IOBASE_RESOURCE) != 0) {
+			printk(KERN_WARNING "Could not allocate pm iobase resource\n");
+			iounmap(l440gx_map.virt);
+			return -ENXIO;
+		}
+	}
+	/* Set the iobase */
+	iobase = pm_iobase->start;
+	pci_write_config_dword(pm_dev, 0x40, iobase | 1);
+	
+
+	/* Set XBCS# */
+	pci_read_config_word(dev, 0x4e, &word);
+	word |= 0x4;
+        pci_write_config_word(dev, 0x4e, word);
+
+	/* Supply write voltage to the chip */
+	l440gx_set_vpp(&l440gx_map, 1);
+
+	/* Enable the gate on the WE line */
+	outb(inb(TRIBUF_PORT) & ~1, TRIBUF_PORT);
+	
+       	printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
+
+	mymtd = do_map_probe("jedec_probe", &l440gx_map);
+	if (!mymtd) {
+		printk(KERN_NOTICE "JEDEC probe on BIOS chip failed. Using ROM\n");
+		mymtd = do_map_probe("map_rom", &l440gx_map);
+	}
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+
+		add_mtd_device(mymtd);
+		return 0;
+	}
+
+	iounmap(l440gx_map.virt);
+	return -ENXIO;
+}
+
+static void __exit cleanup_l440gx(void)
+{
+	del_mtd_device(mymtd);
+	map_destroy(mymtd);
+	
+	iounmap(l440gx_map.virt);
+}
+
+module_init(init_l440gx);
+module_exit(cleanup_l440gx);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("MTD map driver for BIOS chips on Intel L440GX motherboards");
diff --git a/drivers/mtd/maps/lasat.c b/drivers/mtd/maps/lasat.c
new file mode 100644
index 000000000000..c658d4045ef2
--- /dev/null
+++ b/drivers/mtd/maps/lasat.c
@@ -0,0 +1,102 @@
+/*
+ * Flash device on Lasat 100 and 200 boards
+ *
+ * (C) 2002 Brian Murphy <brian@murphy.dk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * $Id: lasat.c,v 1.9 2004/11/04 13:24:15 gleixner Exp $
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+#include <asm/lasat/lasat.h>
+
+static struct mtd_info *lasat_mtd;
+
+static struct mtd_partition partition_info[LASAT_MTD_LAST];
+static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Filesystem", "Config"};
+
+static void lasat_set_vpp(struct map_info *map, int vpp)
+{
+	if (vpp)
+	    *lasat_misc->flash_wp_reg |= 1 << lasat_misc->flash_wp_bit;
+	else
+	    *lasat_misc->flash_wp_reg &= ~(1 << lasat_misc->flash_wp_bit);
+}
+
+static struct map_info lasat_map = {
+	.name = "LASAT flash",
+	.bankwidth = 4,
+	.set_vpp = lasat_set_vpp
+};
+
+static int __init init_lasat(void)
+{
+	int i;
+	/* since we use AMD chips and set_vpp is not implimented
+	 * for these (yet) we still have to permanently enable flash write */
+	printk(KERN_NOTICE "Unprotecting flash\n");
+	ENABLE_VPP((&lasat_map));
+
+	lasat_map.phys = lasat_flash_partition_start(LASAT_MTD_BOOTLOADER);
+	lasat_map.virt = ioremap_nocache(
+		        lasat_map.phys, lasat_board_info.li_flash_size);
+	lasat_map.size = lasat_board_info.li_flash_size;
+
+	simple_map_init(&lasat_map);
+
+	for (i=0; i < LASAT_MTD_LAST; i++)
+		partition_info[i].name = lasat_mtd_partnames[i];
+
+	lasat_mtd = do_map_probe("cfi_probe", &lasat_map);
+
+	if (!lasat_mtd)
+	    lasat_mtd = do_map_probe("jedec_probe", &lasat_map);
+
+	if (lasat_mtd) {
+		u32 size, offset = 0;
+
+		lasat_mtd->owner = THIS_MODULE;
+
+		for (i=0; i < LASAT_MTD_LAST; i++) {
+			size = lasat_flash_partition_size(i);
+			partition_info[i].size = size;
+			partition_info[i].offset = offset;
+			offset += size;
+		}
+
+		add_mtd_partitions( lasat_mtd, partition_info, LASAT_MTD_LAST );
+		return 0;
+	}
+
+	return -ENXIO;
+}
+
+static void __exit cleanup_lasat(void)
+{
+	if (lasat_mtd) {
+		del_mtd_partitions(lasat_mtd);
+		map_destroy(lasat_mtd);
+	}
+	if (lasat_map.virt) {
+		lasat_map.virt = 0;
+	}
+}
+
+module_init(init_lasat);
+module_exit(cleanup_lasat);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Brian Murphy <brian@murphy.dk>");
+MODULE_DESCRIPTION("Lasat Safepipe/Masquerade MTD map driver");
diff --git a/drivers/mtd/maps/lubbock-flash.c b/drivers/mtd/maps/lubbock-flash.c
new file mode 100644
index 000000000000..1298de475c9a
--- /dev/null
+++ b/drivers/mtd/maps/lubbock-flash.c
@@ -0,0 +1,168 @@
+/*
+ * $Id: lubbock-flash.c,v 1.19 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * Map driver for the Lubbock developer platform.
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/lubbock.h>
+
+
+#define ROM_ADDR	0x00000000
+#define FLASH_ADDR	0x04000000
+
+#define WINDOW_SIZE 	64*1024*1024
+
+static void lubbock_map_inval_cache(struct map_info *map, unsigned long from, ssize_t len)
+{
+	consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);
+}
+
+static struct map_info lubbock_maps[2] = { {
+	.size =		WINDOW_SIZE,
+	.phys =		0x00000000,
+	.inval_cache = 	lubbock_map_inval_cache,
+}, {
+	.size =		WINDOW_SIZE,
+	.phys =		0x04000000,
+	.inval_cache = 	lubbock_map_inval_cache,
+} };
+
+static struct mtd_partition lubbock_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00140000
+	}
+};
+
+static struct mtd_info *mymtds[2];
+static struct mtd_partition *parsed_parts[2];
+static int nr_parsed_parts[2];
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+static int __init init_lubbock(void)
+{
+	int flashboot = (LUB_CONF_SWITCHES & 1);
+	int ret = 0, i;
+
+	lubbock_maps[0].bankwidth = lubbock_maps[1].bankwidth = 
+		(BOOT_DEF & 1) ? 2 : 4;
+
+	/* Compensate for the nROMBT switch which swaps the flash banks */
+	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+	       flashboot?"Flash":"ROM", flashboot);
+
+	lubbock_maps[flashboot^1].name = "Lubbock Application Flash";
+	lubbock_maps[flashboot].name = "Lubbock Boot ROM";
+
+	for (i = 0; i < 2; i++) {
+		lubbock_maps[i].virt = ioremap(lubbock_maps[i].phys, WINDOW_SIZE);
+		if (!lubbock_maps[i].virt) {
+			printk(KERN_WARNING "Failed to ioremap %s\n", lubbock_maps[i].name);
+			if (!ret)
+				ret = -ENOMEM;
+			continue;
+		}
+		lubbock_maps[i].cached = ioremap_cached(lubbock_maps[i].phys, WINDOW_SIZE);
+		if (!lubbock_maps[i].cached)
+			printk(KERN_WARNING "Failed to ioremap cached %s\n", lubbock_maps[i].name);
+		simple_map_init(&lubbock_maps[i]);
+
+		printk(KERN_NOTICE "Probing %s at physical address 0x%08lx (%d-bit bankwidth)\n",
+		       lubbock_maps[i].name, lubbock_maps[i].phys, 
+		       lubbock_maps[i].bankwidth * 8);
+
+		mymtds[i] = do_map_probe("cfi_probe", &lubbock_maps[i]);
+		
+		if (!mymtds[i]) {
+			iounmap((void *)lubbock_maps[i].virt);
+			if (lubbock_maps[i].cached)
+				iounmap(lubbock_maps[i].cached);
+			if (!ret)
+				ret = -EIO;
+			continue;
+		}
+		mymtds[i]->owner = THIS_MODULE;
+
+		ret = parse_mtd_partitions(mymtds[i], probes,
+					   &parsed_parts[i], 0);
+
+		if (ret > 0)
+			nr_parsed_parts[i] = ret;
+	}
+
+	if (!mymtds[0] && !mymtds[1])
+		return ret;
+	
+	for (i = 0; i < 2; i++) {
+		if (!mymtds[i]) {
+			printk(KERN_WARNING "%s is absent. Skipping\n", lubbock_maps[i].name);
+		} else if (nr_parsed_parts[i]) {
+			add_mtd_partitions(mymtds[i], parsed_parts[i], nr_parsed_parts[i]);
+		} else if (!i) {
+			printk("Using static partitions on %s\n", lubbock_maps[i].name);
+			add_mtd_partitions(mymtds[i], lubbock_partitions, ARRAY_SIZE(lubbock_partitions));
+		} else {
+			printk("Registering %s as whole device\n", lubbock_maps[i].name);
+			add_mtd_device(mymtds[i]);
+		}
+	}
+	return 0;
+}
+
+static void __exit cleanup_lubbock(void)
+{
+	int i;
+	for (i = 0; i < 2; i++) {
+		if (!mymtds[i])
+			continue;
+
+		if (nr_parsed_parts[i] || !i)
+			del_mtd_partitions(mymtds[i]);
+		else
+			del_mtd_device(mymtds[i]);			
+
+		map_destroy(mymtds[i]);
+		iounmap((void *)lubbock_maps[i].virt);
+		if (lubbock_maps[i].cached)
+			iounmap(lubbock_maps[i].cached);
+
+		if (parsed_parts[i])
+			kfree(parsed_parts[i]);
+	}
+}
+
+module_init(init_lubbock);
+module_exit(cleanup_lubbock);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_DESCRIPTION("MTD map driver for Intel Lubbock");
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c
new file mode 100644
index 000000000000..38f6a7af53f8
--- /dev/null
+++ b/drivers/mtd/maps/map_funcs.c
@@ -0,0 +1,44 @@
+/*
+ * $Id: map_funcs.c,v 1.9 2004/07/13 22:33:15 dwmw2 Exp $
+ *
+ * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS
+ * is enabled.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/mtd/map.h>
+
+static map_word simple_map_read(struct map_info *map, unsigned long ofs)
+{
+	return inline_map_read(map, ofs);
+}
+
+static void simple_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
+{
+	inline_map_write(map, datum, ofs);
+}
+
+static void simple_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	inline_map_copy_from(map, to, from, len);
+}
+
+static void simple_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	inline_map_copy_to(map, to, from, len);
+}
+
+void simple_map_init(struct map_info *map)
+{
+	BUG_ON(!map_bankwidth_supported(map->bankwidth));
+
+	map->read = simple_map_read;
+	map->write = simple_map_write;
+	map->copy_from = simple_map_copy_from;
+	map->copy_to = simple_map_copy_to;
+}
+
+EXPORT_SYMBOL(simple_map_init);
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
new file mode 100644
index 000000000000..c5c6901a4763
--- /dev/null
+++ b/drivers/mtd/maps/mbx860.c
@@ -0,0 +1,100 @@
+/*
+ * $Id: mbx860.c,v 1.8 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * Handle mapping of the flash on MBX860 boards
+ *
+ * Author:	Anton Todorov
+ * Copyright:	(C) 2001 Emness Technology
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+
+#define WINDOW_ADDR 0xfe000000
+#define WINDOW_SIZE 0x00200000
+
+/* Flash / Partition sizing */
+#define MAX_SIZE_KiB              8192
+#define BOOT_PARTITION_SIZE_KiB    512
+#define KERNEL_PARTITION_SIZE_KiB 5632
+#define APP_PARTITION_SIZE_KiB    2048
+
+#define NUM_PARTITIONS 3
+
+/* partition_info gives details on the logical partitions that the split the
+ * single flash device into. If the size if zero we use up to the end of the
+ * device. */
+static struct mtd_partition partition_info[]={
+	{ .name = "MBX flash BOOT partition",
+	.offset = 0,
+	.size =   BOOT_PARTITION_SIZE_KiB*1024 },
+	{ .name = "MBX flash DATA partition",
+	.offset = BOOT_PARTITION_SIZE_KiB*1024,
+	.size = (KERNEL_PARTITION_SIZE_KiB)*1024 },
+	{ .name = "MBX flash APPLICATION partition",
+	.offset = (BOOT_PARTITION_SIZE_KiB+KERNEL_PARTITION_SIZE_KiB)*1024 }
+};
+				   
+
+static struct mtd_info *mymtd;
+
+struct map_info mbx_map = {
+	.name = "MBX flash",
+	.size = WINDOW_SIZE,
+	.phys = WINDOW_ADDR,
+	.bankwidth = 4,
+};
+
+int __init init_mbx(void)
+{
+	printk(KERN_NOTICE "Motorola MBX flash device: 0x%x at 0x%x\n", WINDOW_SIZE*4, WINDOW_ADDR);
+	mbx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4);
+
+	if (!mbx_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	simple_map_init(&mbx_map);
+
+	mymtd = do_map_probe("jedec_probe", &mbx_map);
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+		add_mtd_device(mymtd);
+                add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
+		return 0;
+	}
+
+	iounmap((void *)mbx_map.virt);
+	return -ENXIO;
+}
+
+static void __exit cleanup_mbx(void)
+{
+	if (mymtd) {
+		del_mtd_device(mymtd);
+		map_destroy(mymtd);
+	}
+	if (mbx_map.virt) {
+		iounmap((void *)mbx_map.virt);
+		mbx_map.virt = 0;
+	}
+}
+
+module_init(init_mbx);
+module_exit(cleanup_mbx);
+
+MODULE_AUTHOR("Anton Todorov <a.todorov@emness.com>");
+MODULE_DESCRIPTION("MTD map driver for Motorola MBX860 board");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/mpc1211.c b/drivers/mtd/maps/mpc1211.c
new file mode 100644
index 000000000000..4685e8e13460
--- /dev/null
+++ b/drivers/mtd/maps/mpc1211.c
@@ -0,0 +1,81 @@
+/*
+ * Flash on MPC-1211
+ *
+ * $Id: mpc1211.c,v 1.4 2004/09/16 23:27:13 gleixner Exp $
+ *
+ * (C) 2002 Interface, Saito.K & Jeanne
+ *
+ * GPL'd
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+
+static struct mtd_info *flash_mtd;
+static struct mtd_partition *parsed_parts;
+
+struct map_info mpc1211_flash_map = {
+	.name		= "MPC-1211 FLASH",
+	.size		= 0x80000,
+	.bankwidth	= 1,
+};
+
+static struct mtd_partition mpc1211_partitions[] = {
+	{
+		.name	= "IPL & ETH-BOOT",
+		.offset	= 0x00000000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "Flash FS",
+		.offset	= 0x00010000,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static int __init init_mpc1211_maps(void)
+{
+	int nr_parts;
+
+	mpc1211_flash_map.phys = 0;
+	mpc1211_flash_map.virt = (void __iomem *)P2SEGADDR(0);
+
+	simple_map_init(&mpc1211_flash_map);
+
+	printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
+	flash_mtd = do_map_probe("jedec_probe", &mpc1211_flash_map);
+	if (!flash_mtd) {
+		printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
+		return -ENXIO;
+	}
+	printk(KERN_NOTICE "MPC-1211: Flash at 0x%08lx\n", mpc1211_flash_map.virt & 0x1fffffff);
+	flash_mtd->module = THIS_MODULE;
+
+	parsed_parts = mpc1211_partitions;
+	nr_parts = ARRAY_SIZE(mpc1211_partitions);
+
+	add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
+	return 0;
+}
+
+static void __exit cleanup_mpc1211_maps(void)
+{
+	if (parsed_parts)
+		del_mtd_partitions(flash_mtd);
+	else
+		del_mtd_device(flash_mtd);
+	map_destroy(flash_mtd);
+}
+
+module_init(init_mpc1211_maps);
+module_exit(cleanup_mpc1211_maps);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Saito.K & Jeanne <ksaito@interface.co.jp>");
+MODULE_DESCRIPTION("MTD map driver for MPC-1211 boards. Interface");
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
new file mode 100644
index 000000000000..ab7e6358d281
--- /dev/null
+++ b/drivers/mtd/maps/netsc520.c
@@ -0,0 +1,140 @@
+/* netsc520.c -- MTD map driver for AMD NetSc520 Demonstration Board
+ *
+ * Copyright (C) 2001 Mark Langsdorf (mark.langsdorf@amd.com)
+ *	based on sc520cdp.c by Sysgo Real-Time Solutions GmbH
+ *
+ * $Id: netsc520.c,v 1.13 2004/11/28 09:40:40 dwmw2 Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * The NetSc520 is a demonstration board for the Elan Sc520 processor available
+ * from AMD.  It has a single back of 16 megs of 32-bit Flash ROM and another
+ * 16 megs of SDRAM.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+
+/*
+** The single, 16 megabyte flash bank is divided into four virtual
+** partitions.  The first partition is 768 KiB and is intended to
+** store the kernel image loaded by the bootstrap loader.  The second
+** partition is 256 KiB and holds the BIOS image.  The third 
+** partition is 14.5 MiB and is intended for the flash file system
+** image.  The last partition is 512 KiB and contains another copy
+** of the BIOS image and the reset vector.
+**
+** Only the third partition should be mounted.  The first partition
+** should not be mounted, but it can erased and written to using the
+** MTD character routines.  The second and fourth partitions should
+** not be touched - it is possible to corrupt the BIOS image by
+** mounting these partitions, and potentially the board will not be
+** recoverable afterwards.
+*/
+
+/* partition_info gives details on the logical partitions that the split the 
+ * single flash device into. If the size if zero we use up to the end of the
+ * device. */
+static struct mtd_partition partition_info[]={
+    { 
+	    .name = "NetSc520 boot kernel", 
+	    .offset = 0, 
+	    .size = 0xc0000
+    },
+    { 
+	    .name = "NetSc520 Low BIOS", 
+	    .offset = 0xc0000, 
+	    .size = 0x40000
+    },
+    { 
+	    .name = "NetSc520 file system", 
+	    .offset = 0x100000, 
+	    .size = 0xe80000
+    },
+    { 
+	    .name = "NetSc520 High BIOS", 
+	    .offset = 0xf80000, 
+	    .size = 0x80000
+    },
+};
+#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+
+#define WINDOW_SIZE	0x00100000
+#define WINDOW_ADDR	0x00200000
+
+static struct map_info netsc520_map = {
+	.name = "netsc520 Flash Bank",
+	.size = WINDOW_SIZE,
+	.bankwidth = 4,
+	.phys = WINDOW_ADDR,
+};
+
+#define NUM_FLASH_BANKS	(sizeof(netsc520_map)/sizeof(struct map_info))
+
+static struct mtd_info *mymtd;
+
+static int __init init_netsc520(void)
+{
+	printk(KERN_NOTICE "NetSc520 flash device: 0x%lx at 0x%lx\n", netsc520_map.size, netsc520_map.phys);
+	netsc520_map.virt = ioremap_nocache(netsc520_map.phys, netsc520_map.size);
+
+	if (!netsc520_map.virt) {
+		printk("Failed to ioremap_nocache\n");
+		return -EIO;
+	}
+
+	simple_map_init(&netsc520_map);
+
+	mymtd = do_map_probe("cfi_probe", &netsc520_map);
+	if(!mymtd)
+		mymtd = do_map_probe("map_ram", &netsc520_map);
+	if(!mymtd)
+		mymtd = do_map_probe("map_rom", &netsc520_map);
+
+	if (!mymtd) {
+		iounmap(netsc520_map.virt);
+		return -ENXIO;
+	}
+		
+	mymtd->owner = THIS_MODULE;
+	add_mtd_partitions( mymtd, partition_info, NUM_PARTITIONS );
+	return 0;
+}
+
+static void __exit cleanup_netsc520(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+	if (netsc520_map.virt) {
+		iounmap(netsc520_map.virt);
+		netsc520_map.virt = NULL;
+	}
+}
+
+module_init(init_netsc520);
+module_exit(cleanup_netsc520);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@amd.com>");
+MODULE_DESCRIPTION("MTD map driver for AMD NetSc520 Demonstration Board");
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
new file mode 100644
index 000000000000..61be5a4148c9
--- /dev/null
+++ b/drivers/mtd/maps/nettel.c
@@ -0,0 +1,496 @@
+/****************************************************************************/
+
+/*
+ *      nettel.c -- mappings for NETtel/SecureEdge/SnapGear (x86) boards.
+ *
+ *      (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
+ *
+ *	$Id: nettel.c,v 1.10 2005/01/05 17:11:29 dwmw2 Exp $
+ */
+
+/****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/reboot.h>
+#include <asm/io.h>
+
+/****************************************************************************/
+
+#define INTEL_BUSWIDTH		1
+#define AMD_WINDOW_MAXSIZE	0x00200000
+#define AMD_BUSWIDTH	 	1
+
+/*
+ *	PAR masks and shifts, assuming 64K pages.
+ */
+#define SC520_PAR_ADDR_MASK	0x00003fff
+#define SC520_PAR_ADDR_SHIFT	16
+#define SC520_PAR_TO_ADDR(par) \
+	(((par)&SC520_PAR_ADDR_MASK) << SC520_PAR_ADDR_SHIFT)
+
+#define SC520_PAR_SIZE_MASK	0x01ffc000
+#define SC520_PAR_SIZE_SHIFT	2
+#define SC520_PAR_TO_SIZE(par) \
+	((((par)&SC520_PAR_SIZE_MASK) << SC520_PAR_SIZE_SHIFT) + (64*1024))
+
+#define SC520_PAR(cs, addr, size) \
+	((cs) | \
+	((((size)-(64*1024)) >> SC520_PAR_SIZE_SHIFT) & SC520_PAR_SIZE_MASK) | \
+	(((addr) >> SC520_PAR_ADDR_SHIFT) & SC520_PAR_ADDR_MASK))
+
+#define SC520_PAR_BOOTCS	0x8a000000
+#define	SC520_PAR_ROMCS1	0xaa000000
+#define SC520_PAR_ROMCS2	0xca000000	/* Cache disabled, 64K page */
+
+static void *nettel_mmcrp = NULL;
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+static struct mtd_info *intel_mtd;
+#endif
+static struct mtd_info *amd_mtd;
+
+/****************************************************************************/
+
+/****************************************************************************/
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+static struct map_info nettel_intel_map = {
+	.name = "SnapGear Intel",
+	.size = 0,
+	.bankwidth = INTEL_BUSWIDTH,
+};
+
+static struct mtd_partition nettel_intel_partitions[] = {
+	{
+		.name = "SnapGear kernel",
+		.offset = 0,
+		.size = 0x000e0000
+	},
+	{
+		.name = "SnapGear filesystem",
+		.offset = 0x00100000,
+	},
+	{
+		.name = "SnapGear config",
+		.offset = 0x000e0000,
+		.size = 0x00020000
+	},
+	{
+		.name = "SnapGear Intel",
+		.offset = 0
+	},
+	{
+		.name = "SnapGear BIOS Config",
+		.offset = 0x007e0000,
+		.size = 0x00020000
+	},
+	{
+		.name = "SnapGear BIOS",
+		.offset = 0x007e0000,
+		.size = 0x00020000
+	},
+};
+#endif
+
+static struct map_info nettel_amd_map = {
+	.name = "SnapGear AMD",
+	.size = AMD_WINDOW_MAXSIZE,
+	.bankwidth = AMD_BUSWIDTH,
+};
+
+static struct mtd_partition nettel_amd_partitions[] = {
+	{
+		.name = "SnapGear BIOS config",
+		.offset = 0x000e0000,
+		.size = 0x00010000
+	},
+	{
+		.name = "SnapGear BIOS",
+		.offset = 0x000f0000,
+		.size = 0x00010000
+	},
+	{
+		.name = "SnapGear AMD",
+		.offset = 0
+	},
+	{
+		.name = "SnapGear high BIOS",
+		.offset = 0x001f0000,
+		.size = 0x00010000
+	}
+};
+
+#define NUM_AMD_PARTITIONS \
+	(sizeof(nettel_amd_partitions)/sizeof(nettel_amd_partitions[0]))
+
+/****************************************************************************/
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+
+/*
+ *	Set the Intel flash back to read mode since some old boot
+ *	loaders don't.
+ */
+static int nettel_reboot_notifier(struct notifier_block *nb, unsigned long val, void *v)
+{
+	struct cfi_private *cfi = nettel_intel_map.fldrv_priv;
+	unsigned long b;
+	
+	/* Make sure all FLASH chips are put back into read mode */
+	for (b = 0; (b < nettel_intel_partitions[3].size); b += 0x100000) {
+		cfi_send_gen_cmd(0xff, 0x55, b, &nettel_intel_map, cfi,
+			cfi->device_type, NULL);
+	}
+	return(NOTIFY_OK);
+}
+
+static struct notifier_block nettel_notifier_block = {
+	nettel_reboot_notifier, NULL, 0
+};
+
+/*
+ *	Erase the configuration file system.
+ *	Used to support the software reset button.
+ */
+static void nettel_erasecallback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static struct erase_info nettel_erase;
+
+int nettel_eraseconfig(void)
+{
+	struct mtd_info *mtd;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	int ret;
+
+	init_waitqueue_head(&wait_q);
+	mtd = get_mtd_device(NULL, 2);
+	if (mtd) {
+		nettel_erase.mtd = mtd;
+		nettel_erase.callback = nettel_erasecallback;
+		nettel_erase.callback = NULL;
+		nettel_erase.addr = 0;
+		nettel_erase.len = mtd->size;
+		nettel_erase.priv = (u_long) &wait_q;
+		nettel_erase.priv = 0;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		add_wait_queue(&wait_q, &wait);
+
+		ret = MTD_ERASE(mtd, &nettel_erase);
+		if (ret) {
+			set_current_state(TASK_RUNNING);
+			remove_wait_queue(&wait_q, &wait);
+			put_mtd_device(mtd);
+			return(ret);
+		}
+
+		schedule();  /* Wait for erase to finish. */
+		remove_wait_queue(&wait_q, &wait);
+		
+		put_mtd_device(mtd);
+	}
+
+	return(0);
+}
+
+#else
+
+int nettel_eraseconfig(void)
+{
+	return(0);
+}
+
+#endif
+
+/****************************************************************************/
+
+int __init nettel_init(void)
+{
+	volatile unsigned long *amdpar;
+	unsigned long amdaddr, maxsize;
+	int num_amd_partitions=0;
+#ifdef CONFIG_MTD_CFI_INTELEXT
+	volatile unsigned long *intel0par, *intel1par;
+	unsigned long orig_bootcspar, orig_romcs1par;
+	unsigned long intel0addr, intel0size;
+	unsigned long intel1addr, intel1size;
+	int intelboot, intel0cs, intel1cs;
+	int num_intel_partitions;
+#endif
+	int rc = 0;
+
+	nettel_mmcrp = (void *) ioremap_nocache(0xfffef000, 4096);
+	if (nettel_mmcrp == NULL) {
+		printk("SNAPGEAR: failed to disable MMCR cache??\n");
+		return(-EIO);
+	}
+
+	/* Set CPU clock to be 33.000MHz */
+	*((unsigned char *) (nettel_mmcrp + 0xc64)) = 0x01;
+
+	amdpar = (volatile unsigned long *) (nettel_mmcrp + 0xc4);
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+	intelboot = 0;
+	intel0cs = SC520_PAR_ROMCS1;
+	intel0par = (volatile unsigned long *) (nettel_mmcrp + 0xc0);
+	intel1cs = SC520_PAR_ROMCS2;
+	intel1par = (volatile unsigned long *) (nettel_mmcrp + 0xbc);
+
+	/*
+	 *	Save the CS settings then ensure ROMCS1 and ROMCS2 are off,
+	 *	otherwise they might clash with where we try to map BOOTCS.
+	 */
+	orig_bootcspar = *amdpar;
+	orig_romcs1par = *intel0par;
+	*intel0par = 0;
+	*intel1par = 0;
+#endif
+
+	/*
+	 *	The first thing to do is determine if we have a separate
+	 *	boot FLASH device. Typically this is a small (1 to 2MB)
+	 *	AMD FLASH part. It seems that device size is about the
+	 *	only way to tell if this is the case...
+	 */
+	amdaddr = 0x20000000;
+	maxsize = AMD_WINDOW_MAXSIZE;
+
+	*amdpar = SC520_PAR(SC520_PAR_BOOTCS, amdaddr, maxsize);
+	__asm__ ("wbinvd");
+
+	nettel_amd_map.phys = amdaddr;
+	nettel_amd_map.virt = ioremap_nocache(amdaddr, maxsize);
+	if (!nettel_amd_map.virt) {
+		printk("SNAPGEAR: failed to ioremap() BOOTCS\n");
+		return(-EIO);
+	}
+	simple_map_init(&nettel_amd_map);
+
+	if ((amd_mtd = do_map_probe("jedec_probe", &nettel_amd_map))) {
+		printk(KERN_NOTICE "SNAPGEAR: AMD flash device size = %dK\n",
+			amd_mtd->size>>10);
+
+		amd_mtd->owner = THIS_MODULE;
+
+		/* The high BIOS partition is only present for 2MB units */
+		num_amd_partitions = NUM_AMD_PARTITIONS;
+		if (amd_mtd->size < AMD_WINDOW_MAXSIZE)
+			num_amd_partitions--;
+		/* Don't add the partition until after the primary INTEL's */
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+		/*
+		 *	Map the Intel flash into memory after the AMD
+		 *	It has to start on a multiple of maxsize.
+		 */
+		maxsize = SC520_PAR_TO_SIZE(orig_romcs1par);
+		if (maxsize < (32 * 1024 * 1024))
+			maxsize = (32 * 1024 * 1024);
+		intel0addr = amdaddr + maxsize;
+#endif
+	} else {
+#ifdef CONFIG_MTD_CFI_INTELEXT
+		/* INTEL boot FLASH */
+		intelboot++;
+
+		if (!orig_romcs1par) {
+			intel0cs = SC520_PAR_BOOTCS;
+			intel0par = (volatile unsigned long *)
+				(nettel_mmcrp + 0xc4);
+			intel1cs = SC520_PAR_ROMCS1;
+			intel1par = (volatile unsigned long *)
+				(nettel_mmcrp + 0xc0);
+
+			intel0addr = SC520_PAR_TO_ADDR(orig_bootcspar);
+			maxsize = SC520_PAR_TO_SIZE(orig_bootcspar);
+		} else {
+			/* Kernel base is on ROMCS1, not BOOTCS */
+			intel0cs = SC520_PAR_ROMCS1;
+			intel0par = (volatile unsigned long *)
+				(nettel_mmcrp + 0xc0);
+			intel1cs = SC520_PAR_BOOTCS;
+			intel1par = (volatile unsigned long *)
+				(nettel_mmcrp + 0xc4);
+
+			intel0addr = SC520_PAR_TO_ADDR(orig_romcs1par);
+			maxsize = SC520_PAR_TO_SIZE(orig_romcs1par);
+		}
+
+		/* Destroy useless AMD MTD mapping */
+		amd_mtd = NULL;
+		iounmap(nettel_amd_map.virt);
+		nettel_amd_map.virt = NULL;
+#else
+		/* Only AMD flash supported */
+		return(-ENXIO);
+#endif
+	}
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+	/*
+	 *	We have determined the INTEL FLASH configuration, so lets
+	 *	go ahead and probe for them now.
+	 */
+
+	/* Set PAR to the maximum size */
+	if (maxsize < (32 * 1024 * 1024))
+		maxsize = (32 * 1024 * 1024);
+	*intel0par = SC520_PAR(intel0cs, intel0addr, maxsize);
+
+	/* Turn other PAR off so the first probe doesn't find it */
+	*intel1par = 0;
+
+	/* Probe for the the size of the first Intel flash */
+	nettel_intel_map.size = maxsize;
+	nettel_intel_map.phys = intel0addr;
+	nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
+	if (!nettel_intel_map.virt) {
+		printk("SNAPGEAR: failed to ioremap() ROMCS1\n");
+		return(-EIO);
+	}
+	simple_map_init(&nettel_intel_map);
+
+	intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map);
+	if (!intel_mtd) {
+		iounmap(nettel_intel_map.virt);
+		return(-ENXIO);
+	}
+
+	/* Set PAR to the detected size */
+	intel0size = intel_mtd->size;
+	*intel0par = SC520_PAR(intel0cs, intel0addr, intel0size);
+
+	/*
+	 *	Map second Intel FLASH right after first. Set its size to the
+	 *	same maxsize used for the first Intel FLASH.
+	 */
+	intel1addr = intel0addr + intel0size;
+	*intel1par = SC520_PAR(intel1cs, intel1addr, maxsize);
+	__asm__ ("wbinvd");
+
+	maxsize += intel0size;
+
+	/* Delete the old map and probe again to do both chips */
+	map_destroy(intel_mtd);
+	intel_mtd = NULL;
+	iounmap(nettel_intel_map.virt);
+
+	nettel_intel_map.size = maxsize;
+	nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
+	if (!nettel_intel_map.virt) {
+		printk("SNAPGEAR: failed to ioremap() ROMCS1/2\n");
+		return(-EIO);
+	}
+
+	intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map);
+	if (! intel_mtd) {
+		iounmap((void *) nettel_intel_map.virt);
+		return(-ENXIO);
+	}
+
+	intel1size = intel_mtd->size - intel0size;
+	if (intel1size > 0) {
+		*intel1par = SC520_PAR(intel1cs, intel1addr, intel1size);
+		__asm__ ("wbinvd");
+	} else {
+		*intel1par = 0;
+	}
+
+	printk(KERN_NOTICE "SNAPGEAR: Intel flash device size = %dK\n",
+		(intel_mtd->size >> 10));
+
+	intel_mtd->owner = THIS_MODULE;
+
+#ifndef CONFIG_BLK_DEV_INITRD
+	ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1);
+#endif
+
+	num_intel_partitions = sizeof(nettel_intel_partitions) /
+		sizeof(nettel_intel_partitions[0]);
+
+	if (intelboot) {
+		/*
+		 *	Adjust offset and size of last boot partition.
+		 *	Must allow for BIOS region at end of FLASH.
+		 */
+		nettel_intel_partitions[1].size = (intel0size + intel1size) -
+			(1024*1024 + intel_mtd->erasesize);
+		nettel_intel_partitions[3].size = intel0size + intel1size;
+		nettel_intel_partitions[4].offset = 
+			(intel0size + intel1size) - intel_mtd->erasesize;
+		nettel_intel_partitions[4].size = intel_mtd->erasesize;
+		nettel_intel_partitions[5].offset =
+			nettel_intel_partitions[4].offset;
+		nettel_intel_partitions[5].size =
+			nettel_intel_partitions[4].size;
+	} else {
+		/* No BIOS regions when AMD boot */
+		num_intel_partitions -= 2;
+	}
+	rc = add_mtd_partitions(intel_mtd, nettel_intel_partitions,
+		num_intel_partitions);
+#endif
+
+	if (amd_mtd) {
+		rc = add_mtd_partitions(amd_mtd, nettel_amd_partitions,
+			num_amd_partitions);
+	}
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+	register_reboot_notifier(&nettel_notifier_block);
+#endif
+
+	return(rc);
+}
+
+/****************************************************************************/
+
+void __exit nettel_cleanup(void)
+{
+#ifdef CONFIG_MTD_CFI_INTELEXT
+	unregister_reboot_notifier(&nettel_notifier_block);
+#endif
+	if (amd_mtd) {
+		del_mtd_partitions(amd_mtd);
+		map_destroy(amd_mtd);
+	}
+	if (nettel_amd_map.virt) {
+		iounmap(nettel_amd_map.virt);
+		nettel_amd_map.virt = NULL;
+	}
+#ifdef CONFIG_MTD_CFI_INTELEXT
+	if (intel_mtd) {
+		del_mtd_partitions(intel_mtd);
+		map_destroy(intel_mtd);
+	}
+	if (nettel_intel_map.virt) {
+		iounmap(nettel_intel_map.virt);
+		nettel_intel_map.virt = 0;
+	}
+#endif
+}
+
+/****************************************************************************/
+
+module_init(nettel_init);
+module_exit(nettel_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
+MODULE_DESCRIPTION("SnapGear/SecureEdge FLASH support");
+
+/****************************************************************************/
diff --git a/drivers/mtd/maps/ocelot.c b/drivers/mtd/maps/ocelot.c
new file mode 100644
index 000000000000..82c3070678c5
--- /dev/null
+++ b/drivers/mtd/maps/ocelot.c
@@ -0,0 +1,175 @@
+/*
+ * $Id: ocelot.c,v 1.16 2005/01/05 18:05:13 dwmw2 Exp $
+ *
+ * Flash on Momenco Ocelot
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#define OCELOT_PLD 0x2c000000
+#define FLASH_WINDOW_ADDR 0x2fc00000
+#define FLASH_WINDOW_SIZE 0x00080000
+#define FLASH_BUSWIDTH 1
+#define NVRAM_WINDOW_ADDR 0x2c800000
+#define NVRAM_WINDOW_SIZE 0x00007FF0
+#define NVRAM_BUSWIDTH 1
+
+static unsigned int cacheflush = 0;
+
+static struct mtd_info *flash_mtd;
+static struct mtd_info *nvram_mtd;
+
+static void ocelot_ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+{
+        struct map_info *map = mtd->priv;
+	size_t done = 0;
+
+	/* If we use memcpy, it does word-wide writes. Even though we told the 
+	   GT64120A that it's an 8-bit wide region, word-wide writes don't work.
+	   We end up just writing the first byte of the four to all four bytes.
+	   So we have this loop instead */
+	*retlen = len;
+	while(len) {
+		__raw_writeb(*(unsigned char *) from, map->virt + to);
+		from++;
+		to++;
+		len--;
+	}
+}
+
+static struct mtd_partition *parsed_parts;
+
+struct map_info ocelot_flash_map = {
+	.name = "Ocelot boot flash",
+	.size = FLASH_WINDOW_SIZE,
+	.bankwidth = FLASH_BUSWIDTH,
+	.phys = FLASH_WINDOW_ADDR,
+};
+
+struct map_info ocelot_nvram_map = {
+	.name = "Ocelot NVRAM",
+	.size = NVRAM_WINDOW_SIZE,
+	.bankwidth = NVRAM_BUSWIDTH,
+	.phys = NVRAM_WINDOW_ADDR,
+};
+
+static const char *probes[] = { "RedBoot", NULL };
+
+static int __init init_ocelot_maps(void)
+{
+	void *pld;
+	int nr_parts;
+	unsigned char brd_status;
+
+       	printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 0x%x, NVRAM 0x%x at 0x%x\n", 
+	       FLASH_WINDOW_SIZE, FLASH_WINDOW_ADDR, NVRAM_WINDOW_SIZE, NVRAM_WINDOW_ADDR);
+
+	/* First check whether the flash jumper is present */
+	pld = ioremap(OCELOT_PLD, 0x10);
+	if (!pld) {
+		printk(KERN_NOTICE "Failed to ioremap Ocelot PLD\n");
+		return -EIO;
+	}
+	brd_status = readb(pld+4);
+	iounmap(pld);
+
+	/* Now ioremap the NVRAM space */
+	ocelot_nvram_map.virt = ioremap_nocache(NVRAM_WINDOW_ADDR, NVRAM_WINDOW_SIZE);
+	if (!ocelot_nvram_map.virt) {
+		printk(KERN_NOTICE "Failed to ioremap Ocelot NVRAM space\n");
+		return -EIO;
+	}
+
+	simple_map_init(&ocelot_nvram_map);
+
+	/* And do the RAM probe on it to get an MTD device */
+	nvram_mtd = do_map_probe("map_ram", &ocelot_nvram_map);
+	if (!nvram_mtd) {
+		printk("NVRAM probe failed\n");
+		goto fail_1;
+	}
+	nvram_mtd->owner = THIS_MODULE;
+	nvram_mtd->erasesize = 16;
+	/* Override the write() method */
+	nvram_mtd->write = ocelot_ram_write;
+
+	/* Now map the flash space */
+	ocelot_flash_map.virt = ioremap_nocache(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE);
+	if (!ocelot_flash_map.virt) {
+		printk(KERN_NOTICE "Failed to ioremap Ocelot flash space\n");
+		goto fail_2;
+	}
+	/* Now the cached version */
+	ocelot_flash_map.cached = (unsigned long)__ioremap(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE, 0);
+
+	simple_map_init(&ocelot_flash_map);
+
+	/* Only probe for flash if the write jumper is present */
+	if (brd_status & 0x40) {
+		flash_mtd = do_map_probe("jedec", &ocelot_flash_map);
+	} else {
+		printk(KERN_NOTICE "Ocelot flash write jumper not present. Treating as ROM\n");
+	}
+	/* If that failed or the jumper's absent, pretend it's ROM */
+	if (!flash_mtd) {
+		flash_mtd = do_map_probe("map_rom", &ocelot_flash_map);
+		/* If we're treating it as ROM, set the erase size */
+		if (flash_mtd)
+			flash_mtd->erasesize = 0x10000;
+	}
+	if (!flash_mtd)
+		goto fail3;
+
+	add_mtd_device(nvram_mtd);
+
+	flash_mtd->owner = THIS_MODULE;
+	nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
+
+	if (nr_parts > 0)
+		add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
+	else
+		add_mtd_device(flash_mtd);
+
+	return 0;
+	
+ fail3:	
+	iounmap((void *)ocelot_flash_map.virt);
+	if (ocelot_flash_map.cached)
+			iounmap((void *)ocelot_flash_map.cached);
+ fail_2:
+	map_destroy(nvram_mtd);
+ fail_1:
+	iounmap((void *)ocelot_nvram_map.virt);
+
+	return -ENXIO;
+}
+
+static void __exit cleanup_ocelot_maps(void)
+{
+	del_mtd_device(nvram_mtd);
+	map_destroy(nvram_mtd);
+	iounmap((void *)ocelot_nvram_map.virt);
+
+	if (parsed_parts)
+		del_mtd_partitions(flash_mtd);
+	else
+		del_mtd_device(flash_mtd);
+	map_destroy(flash_mtd);
+	iounmap((void *)ocelot_flash_map.virt);
+	if (ocelot_flash_map.cached)
+		iounmap((void *)ocelot_flash_map.cached);
+}
+
+module_init(init_ocelot_maps);
+module_exit(cleanup_ocelot_maps);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
+MODULE_DESCRIPTION("MTD map driver for Momenco Ocelot board");
diff --git a/drivers/mtd/maps/ocotea.c b/drivers/mtd/maps/ocotea.c
new file mode 100644
index 000000000000..6e559bc14636
--- /dev/null
+++ b/drivers/mtd/maps/ocotea.c
@@ -0,0 +1,154 @@
+/*
+ * Mapping for Ocotea user flash
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2002-2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+#include <linux/version.h>
+#include <asm/io.h>
+#include <asm/ibm44x.h>
+#include <platforms/4xx/ocotea.h>
+
+static struct mtd_info *flash;
+
+static struct map_info ocotea_small_map = {
+	.name =		"Ocotea small flash",
+	.size =		OCOTEA_SMALL_FLASH_SIZE,
+	.buswidth =	1,
+};
+
+static struct map_info ocotea_large_map = {
+	.name =		"Ocotea large flash",
+	.size =		OCOTEA_LARGE_FLASH_SIZE,
+	.buswidth =	1,
+};
+
+static struct mtd_partition ocotea_small_partitions[] = {
+	{
+		.name =   "pibs",
+		.offset = 0x0,
+		.size =   0x100000,
+	}
+};
+
+static struct mtd_partition ocotea_large_partitions[] = {
+	{
+		.name =   "fs",
+		.offset = 0,
+		.size =   0x300000,
+	},
+	{
+		.name =   "firmware",
+		.offset = 0x300000,
+		.size =   0x100000,
+	}
+};
+
+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
+
+int __init init_ocotea(void)
+{
+	u8 fpga0_reg;
+	u8 *fpga0_adr;
+	unsigned long long small_flash_base, large_flash_base;
+
+	fpga0_adr = ioremap64(OCOTEA_FPGA_ADDR, 16);
+	if (!fpga0_adr)
+		return -ENOMEM;
+
+	fpga0_reg = readb((unsigned long)fpga0_adr);
+	iounmap(fpga0_adr);
+
+	if (OCOTEA_BOOT_LARGE_FLASH(fpga0_reg)) {
+		small_flash_base = OCOTEA_SMALL_FLASH_HIGH;
+		large_flash_base = OCOTEA_LARGE_FLASH_LOW;
+	}
+	else {
+		small_flash_base = OCOTEA_SMALL_FLASH_LOW;
+		large_flash_base = OCOTEA_LARGE_FLASH_HIGH;
+	}
+
+	ocotea_small_map.phys = small_flash_base;
+	ocotea_small_map.virt = ioremap64(small_flash_base,
+					 ocotea_small_map.size);
+
+	if (!ocotea_small_map.virt) {
+		printk("Failed to ioremap flash\n");
+		return -EIO;
+	}
+
+	simple_map_init(&ocotea_small_map);
+
+	flash = do_map_probe("map_rom", &ocotea_small_map);
+	if (flash) {
+		flash->owner = THIS_MODULE;
+		add_mtd_partitions(flash, ocotea_small_partitions,
+					NB_OF(ocotea_small_partitions));
+	} else {
+		printk("map probe failed for flash\n");
+		return -ENXIO;
+	}
+
+	ocotea_large_map.phys = large_flash_base;
+	ocotea_large_map.virt = ioremap64(large_flash_base,
+					 ocotea_large_map.size);
+
+	if (!ocotea_large_map.virt) {
+		printk("Failed to ioremap flash\n");
+		return -EIO;
+	}
+
+	simple_map_init(&ocotea_large_map);
+
+	flash = do_map_probe("cfi_probe", &ocotea_large_map);
+	if (flash) {
+		flash->owner = THIS_MODULE;
+		add_mtd_partitions(flash, ocotea_large_partitions,
+					NB_OF(ocotea_large_partitions));
+	} else {
+		printk("map probe failed for flash\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void __exit cleanup_ocotea(void)
+{
+	if (flash) {
+		del_mtd_partitions(flash);
+		map_destroy(flash);
+	}
+
+	if (ocotea_small_map.virt) {
+		iounmap((void *)ocotea_small_map.virt);
+		ocotea_small_map.virt = 0;
+	}
+
+	if (ocotea_large_map.virt) {
+		iounmap((void *)ocotea_large_map.virt);
+		ocotea_large_map.virt = 0;
+	}
+}
+
+module_init(init_ocotea);
+module_exit(cleanup_ocotea);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matt Porter <mporter@kernel.crashing.org>");
+MODULE_DESCRIPTION("MTD map and partitions for IBM 440GX Ocotea boards");
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
new file mode 100644
index 000000000000..e5ff83de420e
--- /dev/null
+++ b/drivers/mtd/maps/octagon-5066.c
@@ -0,0 +1,248 @@
+// $Id: octagon-5066.c,v 1.26 2004/07/12 22:38:29 dwmw2 Exp $
+/* ######################################################################
+
+   Octagon 5066 MTD Driver. 
+  
+   The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It
+   comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that
+   is replacable by flash. Both units are mapped through a multiplexer
+   into a 32k memory window at 0xe8000. The control register for the 
+   multiplexing unit is located at IO 0x208 with a bit map of
+     0-5 Page Selection in 32k increments
+     6-7 Device selection:
+        00 SSD off
+        01 SSD 0 (Socket)
+        10 SSD 1 (Flash chip)
+        11 undefined
+  
+   On each SSD, the first 128k is reserved for use by the bios
+   (actually it IS the bios..) This only matters if you are booting off the 
+   flash, you must not put a file system starting there.
+   
+   The driver tries to do a detection algorithm to guess what sort of devices
+   are plugged into the sockets.
+   
+   ##################################################################### */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+
+#define WINDOW_START 0xe8000
+#define WINDOW_LENGTH 0x8000
+#define WINDOW_SHIFT 27
+#define WINDOW_MASK 0x7FFF
+#define PAGE_IO 0x208
+
+static volatile char page_n_dev = 0;
+static unsigned long iomapadr;
+static DEFINE_SPINLOCK(oct5066_spin);
+
+/*
+ * We use map_priv_1 to identify which device we are.
+ */
+
+static void __oct5066_page(struct map_info *map, __u8 byte)
+{
+	outb(byte,PAGE_IO);
+	page_n_dev = byte;
+}
+
+static inline void oct5066_page(struct map_info *map, unsigned long ofs)
+{
+	__u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT);
+	
+	if (page_n_dev != byte)
+		__oct5066_page(map, byte);
+}
+
+
+static map_word oct5066_read8(struct map_info *map, unsigned long ofs)
+{
+	map_word ret;
+	spin_lock(&oct5066_spin);
+	oct5066_page(map, ofs);
+	ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
+	spin_unlock(&oct5066_spin);
+	return ret;
+}
+
+static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
+		
+		spin_lock(&oct5066_spin);
+		oct5066_page(map, from);
+		memcpy_fromio(to, iomapadr + from, thislen);
+		spin_unlock(&oct5066_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static void oct5066_write8(struct map_info *map, map_word d, unsigned long adr)
+{
+	spin_lock(&oct5066_spin);
+	oct5066_page(map, adr);
+	writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
+	spin_unlock(&oct5066_spin);
+}
+
+static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
+		
+		spin_lock(&oct5066_spin);
+		oct5066_page(map, to);
+		memcpy_toio(iomapadr + to, from, thislen);
+		spin_unlock(&oct5066_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static struct map_info oct5066_map[2] = {
+	{
+		.name = "Octagon 5066 Socket",
+		.phys = NO_XIP,
+		.size = 512 * 1024,
+		.bankwidth = 1,
+		.read = oct5066_read8,
+		.copy_from = oct5066_copy_from,
+		.write = oct5066_write8,
+		.copy_to = oct5066_copy_to,
+		.map_priv_1 = 1<<6
+	},
+	{
+		.name = "Octagon 5066 Internal Flash",
+		.phys = NO_XIP,
+		.size = 2 * 1024 * 1024,
+		.bankwidth = 1,
+		.read = oct5066_read8,
+		.copy_from = oct5066_copy_from,
+		.write = oct5066_write8,
+		.copy_to = oct5066_copy_to,
+		.map_priv_1 = 2<<6
+	}
+};
+
+static struct mtd_info *oct5066_mtd[2] = {NULL, NULL};
+
+// OctProbe - Sense if this is an octagon card
+// ---------------------------------------------------------------------
+/* Perform a simple validity test, we map the window select SSD0 and
+   change pages while monitoring the window. A change in the window, 
+   controlled by the PAGE_IO port is a functioning 5066 board. This will
+   fail if the thing in the socket is set to a uniform value. */
+static int __init OctProbe(void)
+{
+   unsigned int Base = (1 << 6);
+   unsigned long I;
+   unsigned long Values[10];
+   for (I = 0; I != 20; I++)
+   {
+      outb(Base + (I%10),PAGE_IO);
+      if (I < 10)
+      {
+	 // Record the value and check for uniqueness
+	 Values[I%10] = readl(iomapadr);
+	 if (I > 0 && Values[I%10] == Values[0])
+	    return -EAGAIN;
+      }      
+      else
+      {
+	 // Make sure we get the same values on the second pass
+	 if (Values[I%10] != readl(iomapadr))
+	    return -EAGAIN;
+      }      
+   }
+   return 0;
+}
+
+void cleanup_oct5066(void)
+{
+	int i;
+	for (i=0; i<2; i++) {
+		if (oct5066_mtd[i]) {
+			del_mtd_device(oct5066_mtd[i]);
+			map_destroy(oct5066_mtd[i]);
+		}
+	}
+	iounmap((void *)iomapadr);
+	release_region(PAGE_IO, 1);
+}
+
+int __init init_oct5066(void)
+{
+	int i;
+	int ret = 0;
+
+	// Do an autoprobe sequence
+	if (!request_region(PAGE_IO,1,"Octagon SSD")) {
+		printk(KERN_NOTICE "5066: Page Register in Use\n");
+		return -EAGAIN;
+	}
+	iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH);
+	if (!iomapadr) {
+		printk(KERN_NOTICE "Failed to ioremap memory region\n");
+		ret = -EIO;
+		goto out_rel;
+	}
+	if (OctProbe() != 0) {
+		printk(KERN_NOTICE "5066: Octagon Probe Failed, is this an Octagon 5066 SBC?\n");
+		iounmap((void *)iomapadr);
+		ret = -EAGAIN;
+		goto out_unmap;
+	}
+      	
+	// Print out our little header..
+	printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START,
+	       WINDOW_START+WINDOW_LENGTH);
+	
+	for (i=0; i<2; i++) {
+		oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]);
+		if (!oct5066_mtd[i])
+			oct5066_mtd[i] = do_map_probe("jedec", &oct5066_map[i]);
+		if (!oct5066_mtd[i])
+			oct5066_mtd[i] = do_map_probe("map_ram", &oct5066_map[i]);
+		if (!oct5066_mtd[i])
+			oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]);
+		if (oct5066_mtd[i]) {
+			oct5066_mtd[i]->owner = THIS_MODULE;
+			add_mtd_device(oct5066_mtd[i]);
+		}
+	}
+	
+	if (!oct5066_mtd[0] && !oct5066_mtd[1]) {
+		cleanup_oct5066();
+		return -ENXIO;
+	}	  
+
+	return 0;
+
+ out_unmap:
+	iounmap((void *)iomapadr);
+ out_rel:
+	release_region(PAGE_IO, 1);
+	return ret;
+}
+
+module_init(init_oct5066);
+module_exit(cleanup_oct5066);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com>, David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("MTD map driver for Octagon 5066 Single Board Computer");
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
new file mode 100644
index 000000000000..496109071cb1
--- /dev/null
+++ b/drivers/mtd/maps/omap-toto-flash.c
@@ -0,0 +1,137 @@
+/*
+ * NOR Flash memory access on TI Toto board
+ *
+ * jzhang@ti.com (C) 2003 Texas Instruments.
+ *
+ *  (C) 2002 MontVista Software, Inc.
+ *
+ * $Id: omap-toto-flash.c,v 1.3 2004/09/16 23:27:13 gleixner Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+
+#ifndef CONFIG_ARCH_OMAP
+#error This is for OMAP architecture only
+#endif
+
+//these lines need be moved to a hardware header file
+#define OMAP_TOTO_FLASH_BASE 0xd8000000
+#define OMAP_TOTO_FLASH_SIZE 0x80000
+
+static struct map_info omap_toto_map_flash = {
+	.name =		"OMAP Toto flash",
+	.bankwidth =	2,
+	.virt =		(void __iomem *)OMAP_TOTO_FLASH_BASE,
+};
+
+ 
+static struct mtd_partition toto_flash_partitions[] = {
+	{
+		.name =		"BootLoader",
+		.size =		0x00040000,     /* hopefully u-boot will stay 128k + 128*/
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name =		"ReservedSpace",
+		.size =		0x00030000,
+		.offset =	MTDPART_OFS_APPEND,
+		//mask_flags:	MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name =		"EnvArea",      /* bottom 64KiB for env vars */
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	MTDPART_OFS_APPEND,
+	} 
+};
+
+static struct mtd_partition *parsed_parts;
+
+static struct mtd_info *flash_mtd;
+ 
+static int __init init_flash (void)   
+{
+
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	int parsed_nr_parts = 0;
+	const char *part_type;
+ 
+	/*
+	 * Static partition definition selection
+	 */
+	part_type = "static";
+
+ 	parts = toto_flash_partitions;
+	nb_parts = ARRAY_SIZE(toto_flash_partitions);
+	omap_toto_map_flash.size = OMAP_TOTO_FLASH_SIZE;
+	omap_toto_map_flash.phys = virt_to_phys(OMAP_TOTO_FLASH_BASE);
+
+	simple_map_init(&omap_toto_map_flash);
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	printk(KERN_NOTICE "OMAP toto flash: probing %d-bit flash bus\n",
+		omap_toto_map_flash.bankwidth*8);
+	flash_mtd = do_map_probe("jedec_probe", &omap_toto_map_flash);
+	if (!flash_mtd)
+		return -ENXIO;
+ 
+ 	if (parsed_nr_parts > 0) {
+		parts = parsed_parts;
+		nb_parts = parsed_nr_parts;
+	}
+
+	if (nb_parts == 0) {
+		printk(KERN_NOTICE "OMAP toto flash: no partition info available,"
+			"registering whole flash at once\n");
+		if (add_mtd_device(flash_mtd)){
+            return -ENXIO;
+        }
+	} else {
+		printk(KERN_NOTICE "Using %s partition definition\n",
+			part_type);
+		return add_mtd_partitions(flash_mtd, parts, nb_parts);
+	}
+	return 0;
+}
+ 
+int __init omap_toto_mtd_init(void)  
+{
+	int status;
+
+ 	if (status = init_flash()) {
+		printk(KERN_ERR "OMAP Toto Flash: unable to init map for toto flash\n");
+	}
+    return status;
+}
+
+static void  __exit omap_toto_mtd_cleanup(void)  
+{
+	if (flash_mtd) {
+		del_mtd_partitions(flash_mtd);
+		map_destroy(flash_mtd);
+		if (parsed_parts)
+			kfree(parsed_parts);
+	}
+}
+
+module_init(omap_toto_mtd_init);
+module_exit(omap_toto_mtd_cleanup);
+
+MODULE_AUTHOR("Jian Zhang");
+MODULE_DESCRIPTION("OMAP Toto board map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pb1550-flash.c b/drivers/mtd/maps/pb1550-flash.c
new file mode 100644
index 000000000000..1424726a219e
--- /dev/null
+++ b/drivers/mtd/maps/pb1550-flash.c
@@ -0,0 +1,203 @@
+/*
+ * Flash memory access on Alchemy Pb1550 board
+ * 
+ * $Id: pb1550-flash.c,v 1.6 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c:
+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
+ * 
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/au1000.h>
+#include <asm/pb1550.h>
+
+#ifdef 	DEBUG_RW
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)	
+#endif
+
+static unsigned long window_addr;
+static unsigned long window_size;
+
+
+static struct map_info pb1550_map = {
+	.name =	"Pb1550 flash",
+};
+
+static unsigned char flash_bankwidth = 4;
+
+/* 
+ * Support only 64MB NOR Flash parts
+ */
+
+#ifdef PB1550_BOTH_BANKS
+/* both banks will be used. Combine the first bank and the first 
+ * part of the second bank together into a single jffs/jffs2
+ * partition.
+ */
+static struct mtd_partition pb1550_partitions[] = {
+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
+	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
+	 */
+        {
+                .name = "User FS",
+                .size =   (0x1FC00000 - 0x18000000),
+                .offset = 0x0000000
+        },{
+                .name = "yamon",
+                .size = 0x0100000,
+		.offset = MTDPART_OFS_APPEND,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "raw kernel",
+		.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+#elif defined(PB1550_BOOT_ONLY)
+static struct mtd_partition pb1550_partitions[] = {
+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+	 * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
+	 */
+        {
+                .name = "User FS",
+                .size =   0x03c00000,
+                .offset = 0x0000000
+        },{
+                .name = "yamon",
+                .size = 0x0100000,
+		.offset = MTDPART_OFS_APPEND,
+                .mask_flags = MTD_WRITEABLE
+        },{
+                .name = "raw kernel",
+		.size = (0x300000-0x40000), /* last 256KB is yamon env */
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+#elif defined(PB1550_USER_ONLY)
+static struct mtd_partition pb1550_partitions[] = {
+	/* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+	 * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
+	 */
+        {
+                .name = "User FS",
+                .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
+                .offset = 0x0000000
+        },{
+                .name = "raw kernel",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+        }
+};
+#else
+#error MTD_PB1550 define combo error /* should never happen */
+#endif
+
+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_info *mymtd;
+
+/*
+ * Probe the flash density and setup window address and size
+ * based on user CONFIG options. There are times when we don't
+ * want the MTD driver to be probing the boot or user flash,
+ * so having the option to enable only one bank is important.
+ */
+int setup_flash_params(void)
+{
+	u16 boot_swapboot;
+	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | 
+		((bcsr->status >> 6)  & 0x1);
+	printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot);
+
+	switch (boot_swapboot) {
+		case 0: /* 512Mbit devices, both enabled */
+		case 1: 
+		case 8:
+		case 9: 
+#if defined(PB1550_BOTH_BANKS)
+			window_addr = 0x18000000;
+			window_size = 0x8000000; 
+#elif defined(PB1550_BOOT_ONLY)
+			window_addr = 0x1C000000;
+			window_size = 0x4000000; 
+#else /* USER ONLY */
+			window_addr = 0x1E000000;
+			window_size = 0x4000000; 
+#endif
+			break;
+		case 0xC:
+		case 0xD:
+		case 0xE:
+		case 0xF: 
+			/* 64 MB Boot NOR Flash is disabled */
+			/* and the start address is moved to 0x0C00000 */
+			window_addr = 0x0C000000;
+			window_size = 0x4000000; 
+		default:
+			printk("Pb1550 MTD: unsupported boot:swap setting\n");
+			return 1;
+	}
+	return 0;
+}
+
+int __init pb1550_mtd_init(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	
+	/* Default flash bankwidth */
+	pb1550_map.bankwidth = flash_bankwidth;
+
+	if (setup_flash_params()) 
+		return -ENXIO;
+
+	/*
+	 * Static partition definition selection
+	 */
+	parts = pb1550_partitions;
+	nb_parts = NB_OF(pb1550_partitions);
+	pb1550_map.size = window_size;
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", 
+			pb1550_map.bankwidth*8);
+	pb1550_map.virt = ioremap(window_addr, window_size);
+	mymtd = do_map_probe("cfi_probe", &pb1550_map);
+	if (!mymtd) return -ENXIO;
+	mymtd->owner = THIS_MODULE;
+
+	add_mtd_partitions(mymtd, parts, nb_parts);
+	return 0;
+}
+
+static void __exit pb1550_mtd_cleanup(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+}
+
+module_init(pb1550_mtd_init);
+module_exit(pb1550_mtd_cleanup);
+
+MODULE_AUTHOR("Embedded Edge, LLC");
+MODULE_DESCRIPTION("Pb1550 mtd map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pb1xxx-flash.c b/drivers/mtd/maps/pb1xxx-flash.c
new file mode 100644
index 000000000000..06e731540552
--- /dev/null
+++ b/drivers/mtd/maps/pb1xxx-flash.c
@@ -0,0 +1,178 @@
+/*
+ * Flash memory access on Alchemy Pb1xxx boards
+ * 
+ * (C) 2001 Pete Popov <ppopov@mvista.com>
+ * 
+ * $Id: pb1xxx-flash.c,v 1.14 2004/11/04 13:24:15 gleixner Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#ifdef 	DEBUG_RW
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)	
+#endif
+
+#ifdef CONFIG_MIPS_PB1000
+
+#define WINDOW_ADDR 0x1F800000
+#define WINDOW_SIZE 0x800000
+
+static struct mtd_partition pb1xxx_partitions[] = {
+        {
+                .name         =  "yamon env",
+                .size         =   0x00020000,
+                .offset       =   0,
+                .mask_flags   =   MTD_WRITEABLE},
+	{
+                .name         =   "User FS",
+                .size         =   0x003e0000,
+                .offset       =   0x20000,},
+	{
+                .name         =   "boot code",
+                .size         =   0x100000,
+                .offset       =   0x400000,
+                .mask_flags   =   MTD_WRITEABLE},
+	{
+                .name         =   "raw/kernel",
+                .size         =   0x300000,
+                .offset       =   0x500000}
+};
+
+#elif defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1100)
+
+#if defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER)
+/* both 32MB banks will be used. Combine the first 32MB bank and the
+ * first 28MB of the second bank together into a single jffs/jffs2
+ * partition.
+ */
+#define WINDOW_ADDR 0x1C000000
+#define WINDOW_SIZE 0x4000000
+static struct mtd_partition pb1xxx_partitions[] = {
+        {
+                .name         =   "User FS",
+                .size         =   0x3c00000,
+                .offset       =   0x0000000
+        },{
+                .name         =   "yamon",
+                .size         =   0x0100000,
+                .offset       =   0x3c00000,
+                .mask_flags   =   MTD_WRITEABLE
+        },{
+                .name         =   "raw kernel",
+                .size         =   0x02c0000,
+                .offset       =   0x3d00000
+        }
+};
+#elif defined(CONFIG_MTD_PB1500_BOOT) && !defined(CONFIG_MTD_PB1500_USER)
+#define WINDOW_ADDR 0x1E000000
+#define WINDOW_SIZE 0x2000000
+static struct mtd_partition pb1xxx_partitions[] = {
+        {
+                .name         =   "User FS",
+                .size         =   0x1c00000,
+                .offset       =   0x0000000
+        },{
+                .name         =   "yamon",
+                .size         =   0x0100000,
+                .offset       =   0x1c00000,
+                .mask_flags   =   MTD_WRITEABLE
+        },{
+                .name         =   "raw kernel",
+                .size         =   0x02c0000,
+                .offset       =   0x1d00000
+        }
+};
+#elif !defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER)
+#define WINDOW_ADDR 0x1C000000
+#define WINDOW_SIZE 0x2000000
+static struct mtd_partition pb1xxx_partitions[] = {
+        {
+                .name         =   "User FS",
+                .size         =    0x1e00000,
+                .offset       =    0x0000000
+        },{
+                .name         =    "raw kernel",
+                .size         =    0x0200000,
+                .offset       =    0x1e00000,
+        }
+};
+#else
+#error MTD_PB1500 define combo error /* should never happen */
+#endif
+#else
+#error Unsupported board
+#endif
+
+#define NAME     	"Pb1x00 Linux Flash"
+#define PADDR    	WINDOW_ADDR
+#define BUSWIDTH	4
+#define SIZE		WINDOW_SIZE
+#define PARTITIONS	4
+
+static struct map_info pb1xxx_mtd_map = {
+	.name		= NAME,
+	.size		= SIZE,
+	.bankwidth	= BUSWIDTH,
+	.phys		= PADDR,
+};
+
+static struct mtd_info *pb1xxx_mtd;
+
+int __init pb1xxx_mtd_init(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	char *part_type;
+	
+	/*
+	 * Static partition definition selection
+	 */
+	part_type = "static";
+	parts = pb1xxx_partitions;
+	nb_parts = ARRAY_SIZE(pb1xxx_partitions);
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	printk(KERN_NOTICE "Pb1xxx flash: probing %d-bit flash bus\n", 
+			BUSWIDTH*8);
+	pb1xxx_mtd_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
+
+	simple_map_init(&pb1xxx_mtd_map);
+
+	pb1xxx_mtd = do_map_probe("cfi_probe", &pb1xxx_mtd_map);
+	if (!pb1xxx_mtd) return -ENXIO;
+	pb1xxx_mtd->owner = THIS_MODULE;
+
+	add_mtd_partitions(pb1xxx_mtd, parts, nb_parts);
+	return 0;
+}
+
+static void __exit pb1xxx_mtd_cleanup(void)
+{
+	if (pb1xxx_mtd) {
+		del_mtd_partitions(pb1xxx_mtd);
+		map_destroy(pb1xxx_mtd);
+		iounmap((void *) pb1xxx_mtd_map.virt);
+	}
+}
+
+module_init(pb1xxx_mtd_init);
+module_exit(pb1xxx_mtd_cleanup);
+
+MODULE_AUTHOR("Pete Popov");
+MODULE_DESCRIPTION("Pb1xxx CFI map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
new file mode 100644
index 000000000000..08b60bdc5381
--- /dev/null
+++ b/drivers/mtd/maps/pci.c
@@ -0,0 +1,388 @@
+/*
+ *  linux/drivers/mtd/maps/pci.c
+ *
+ *  Copyright (C) 2001 Russell King, All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  $Id: pci.c,v 1.9 2004/11/28 09:40:40 dwmw2 Exp $
+ * 
+ * Generic PCI memory map driver.  We support the following boards:
+ *  - Intel IQ80310 ATU.
+ *  - Intel EBSA285 (blank rom programming mode). Tested working 27/09/2001
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+struct map_pci_info;
+
+struct mtd_pci_info {
+	int  (*init)(struct pci_dev *dev, struct map_pci_info *map);
+	void (*exit)(struct pci_dev *dev, struct map_pci_info *map);
+	unsigned long (*translate)(struct map_pci_info *map, unsigned long ofs);
+	const char *map_name;
+};
+
+struct map_pci_info {
+	struct map_info map;
+	void __iomem *base;
+	void (*exit)(struct pci_dev *dev, struct map_pci_info *map);
+	unsigned long (*translate)(struct map_pci_info *map, unsigned long ofs);
+	struct pci_dev *dev;
+};	
+
+static map_word mtd_pci_read8(struct map_info *_map, unsigned long ofs)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+	map_word val;
+	val.x[0]= readb(map->base + map->translate(map, ofs));
+//	printk("read8 : %08lx => %02x\n", ofs, val.x[0]);
+	return val;
+}
+
+#if 0
+static map_word mtd_pci_read16(struct map_info *_map, unsigned long ofs)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+	map_word val;
+	val.x[0] = readw(map->base + map->translate(map, ofs));
+//	printk("read16: %08lx => %04x\n", ofs, val.x[0]);
+	return val;
+}
+#endif
+static map_word mtd_pci_read32(struct map_info *_map, unsigned long ofs)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+	map_word val;
+	val.x[0] = readl(map->base + map->translate(map, ofs));
+//	printk("read32: %08lx => %08x\n", ofs, val.x[0]);
+	return val;
+}
+
+static void mtd_pci_copyfrom(struct map_info *_map, void *to, unsigned long from, ssize_t len)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+	memcpy_fromio(to, map->base + map->translate(map, from), len);
+}
+
+static void mtd_pci_write8(struct map_info *_map, map_word val, unsigned long ofs)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+//	printk("write8 : %08lx <= %02x\n", ofs, val.x[0]);
+	writeb(val.x[0], map->base + map->translate(map, ofs));
+}
+
+#if 0
+static void mtd_pci_write16(struct map_info *_map, map_word val, unsigned long ofs)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+//	printk("write16: %08lx <= %04x\n", ofs, val.x[0]);
+	writew(val.x[0], map->base + map->translate(map, ofs));
+}
+#endif
+static void mtd_pci_write32(struct map_info *_map, map_word val, unsigned long ofs)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+//	printk("write32: %08lx <= %08x\n", ofs, val.x[0]);
+	writel(val.x[0], map->base + map->translate(map, ofs));
+}
+
+static void mtd_pci_copyto(struct map_info *_map, unsigned long to, const void *from, ssize_t len)
+{
+	struct map_pci_info *map = (struct map_pci_info *)_map;
+	memcpy_toio(map->base + map->translate(map, to), from, len);
+}
+
+static struct map_info mtd_pci_map = {
+	.phys =		NO_XIP,
+	.copy_from =	mtd_pci_copyfrom,
+	.copy_to =	mtd_pci_copyto,
+};
+
+/*
+ * Intel IOP80310 Flash driver
+ */
+
+static int
+intel_iq80310_init(struct pci_dev *dev, struct map_pci_info *map)
+{
+	u32 win_base;
+
+	map->map.bankwidth = 1;
+	map->map.read = mtd_pci_read8,
+	map->map.write = mtd_pci_write8,
+
+	map->map.size     = 0x00800000;
+	map->base         = ioremap_nocache(pci_resource_start(dev, 0),
+					    pci_resource_len(dev, 0));
+
+	if (!map->base)
+		return -ENOMEM;
+
+	/*
+	 * We want to base the memory window at Xscale
+	 * bus address 0, not 0x1000.
+	 */
+	pci_read_config_dword(dev, 0x44, &win_base);
+	pci_write_config_dword(dev, 0x44, 0);
+
+	map->map.map_priv_2 = win_base;
+
+	return 0;
+}
+
+static void
+intel_iq80310_exit(struct pci_dev *dev, struct map_pci_info *map)
+{
+	if (map->base)
+		iounmap(map->base);
+	pci_write_config_dword(dev, 0x44, map->map.map_priv_2);
+}
+
+static unsigned long
+intel_iq80310_translate(struct map_pci_info *map, unsigned long ofs)
+{
+	unsigned long page_addr = ofs & 0x00400000;
+
+	/*
+	 * This mundges the flash location so we avoid
+	 * the first 80 bytes (they appear to read nonsense).
+	 */
+	if (page_addr) {
+		writel(0x00000008, map->base + 0x1558);
+		writel(0x00000000, map->base + 0x1550);
+	} else {
+		writel(0x00000007, map->base + 0x1558);
+		writel(0x00800000, map->base + 0x1550);
+		ofs += 0x00800000;
+	}
+
+	return ofs;
+}
+
+static struct mtd_pci_info intel_iq80310_info = {
+	.init =		intel_iq80310_init,
+	.exit =		intel_iq80310_exit,
+	.translate =	intel_iq80310_translate,
+	.map_name =	"cfi_probe",
+};
+
+/*
+ * Intel DC21285 driver
+ */
+
+static int
+intel_dc21285_init(struct pci_dev *dev, struct map_pci_info *map)
+{
+	unsigned long base, len;
+
+	base = pci_resource_start(dev, PCI_ROM_RESOURCE);
+	len  = pci_resource_len(dev, PCI_ROM_RESOURCE);
+
+	if (!len || !base) {
+		/*
+		 * No ROM resource
+		 */
+		base = pci_resource_start(dev, 2);
+		len  = pci_resource_len(dev, 2);
+
+		/*
+		 * We need to re-allocate PCI BAR2 address range to the
+		 * PCI ROM BAR, and disable PCI BAR2.
+		 */
+	} else {
+		/*
+		 * Hmm, if an address was allocated to the ROM resource, but
+		 * not enabled, should we be allocating a new resource for it
+		 * or simply enabling it?
+		 */
+		if (!(pci_resource_flags(dev, PCI_ROM_RESOURCE) &
+				    IORESOURCE_ROM_ENABLE)) {
+		     	u32 val;
+			pci_resource_flags(dev, PCI_ROM_RESOURCE) |= IORESOURCE_ROM_ENABLE;
+			pci_read_config_dword(dev, PCI_ROM_ADDRESS, &val);
+			val |= PCI_ROM_ADDRESS_ENABLE;
+			pci_write_config_dword(dev, PCI_ROM_ADDRESS, val);
+			printk("%s: enabling expansion ROM\n", pci_name(dev));
+		}
+	}
+
+	if (!len || !base)
+		return -ENXIO;
+
+	map->map.bankwidth = 4;
+	map->map.read = mtd_pci_read32,
+	map->map.write = mtd_pci_write32,
+	map->map.size     = len;
+	map->base         = ioremap_nocache(base, len);
+
+	if (!map->base)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void
+intel_dc21285_exit(struct pci_dev *dev, struct map_pci_info *map)
+{
+	u32 val;
+
+	if (map->base)
+		iounmap(map->base);
+
+	/*
+	 * We need to undo the PCI BAR2/PCI ROM BAR address alteration.
+	 */
+	pci_resource_flags(dev, PCI_ROM_RESOURCE) &= ~IORESOURCE_ROM_ENABLE;
+	pci_read_config_dword(dev, PCI_ROM_ADDRESS, &val);
+	val &= ~PCI_ROM_ADDRESS_ENABLE;
+	pci_write_config_dword(dev, PCI_ROM_ADDRESS, val);
+}
+
+static unsigned long
+intel_dc21285_translate(struct map_pci_info *map, unsigned long ofs)
+{
+	return ofs & 0x00ffffc0 ? ofs : (ofs ^ (1 << 5));
+}
+
+static struct mtd_pci_info intel_dc21285_info = {
+	.init =		intel_dc21285_init,
+	.exit =		intel_dc21285_exit,
+	.translate =	intel_dc21285_translate,
+	.map_name =	"jedec_probe",
+};
+
+/*
+ * PCI device ID table
+ */
+
+static struct pci_device_id mtd_pci_ids[] = {
+	{
+		.vendor =	PCI_VENDOR_ID_INTEL,
+		.device =	0x530d,
+		.subvendor =	PCI_ANY_ID,
+		.subdevice =	PCI_ANY_ID,
+		.class =	PCI_CLASS_MEMORY_OTHER << 8,
+		.class_mask =	0xffff00,
+		.driver_data =	(unsigned long)&intel_iq80310_info,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_DEC,
+		.device =	PCI_DEVICE_ID_DEC_21285,
+		.subvendor =	0,	/* DC21285 defaults to 0 on reset */
+		.subdevice =	0,	/* DC21285 defaults to 0 on reset */
+		.driver_data =	(unsigned long)&intel_dc21285_info,
+	},
+	{ 0, }
+};
+
+/*
+ * Generic code follows.
+ */
+
+static int __devinit
+mtd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct mtd_pci_info *info = (struct mtd_pci_info *)id->driver_data;
+	struct map_pci_info *map = NULL;
+	struct mtd_info *mtd = NULL;
+	int err;
+
+	err = pci_enable_device(dev);
+	if (err)
+		goto out;
+
+	err = pci_request_regions(dev, "pci mtd");
+	if (err)
+		goto out;
+
+	map = kmalloc(sizeof(*map), GFP_KERNEL);
+	err = -ENOMEM;
+	if (!map)
+		goto release;
+
+	map->map       = mtd_pci_map;
+	map->map.name  = pci_name(dev);
+	map->dev       = dev;
+	map->exit      = info->exit;
+	map->translate = info->translate;
+
+	err = info->init(dev, map);
+	if (err)
+		goto release;
+
+	/* tsk - do_map_probe should take const char * */
+	mtd = do_map_probe((char *)info->map_name, &map->map);
+	err = -ENODEV;
+	if (!mtd)
+		goto release;
+
+	mtd->owner = THIS_MODULE;
+	add_mtd_device(mtd);
+
+	pci_set_drvdata(dev, mtd);
+
+	return 0;
+
+release:
+	if (mtd)
+		map_destroy(mtd);
+
+	if (map) {
+		map->exit(dev, map);
+		kfree(map);
+	}
+
+	pci_release_regions(dev);
+out:
+	return err;
+}
+
+static void __devexit
+mtd_pci_remove(struct pci_dev *dev)
+{
+	struct mtd_info *mtd = pci_get_drvdata(dev);
+	struct map_pci_info *map = mtd->priv;
+
+	del_mtd_device(mtd);
+	map_destroy(mtd);
+	map->exit(dev, map);
+	kfree(map);
+
+	pci_set_drvdata(dev, NULL);
+	pci_release_regions(dev);
+}
+
+static struct pci_driver mtd_pci_driver = {
+	.name =		"MTD PCI",
+	.probe =	mtd_pci_probe,
+	.remove =	__devexit_p(mtd_pci_remove),
+	.id_table =	mtd_pci_ids,
+};
+
+static int __init mtd_pci_maps_init(void)
+{
+	return pci_module_init(&mtd_pci_driver);
+}
+
+static void __exit mtd_pci_maps_exit(void)
+{
+	pci_unregister_driver(&mtd_pci_driver);
+}
+
+module_init(mtd_pci_maps_init);
+module_exit(mtd_pci_maps_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("Generic PCI map driver");
+MODULE_DEVICE_TABLE(pci, mtd_pci_ids);
+
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
new file mode 100644
index 000000000000..e37b4c1976e5
--- /dev/null
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -0,0 +1,860 @@
+/*
+ * $Id: pcmciamtd.c,v 1.51 2004/07/12 22:38:29 dwmw2 Exp $
+ *
+ * pcmciamtd.c - MTD driver for PCMCIA flash memory cards
+ *
+ * Author: Simon Evans <spse@secret.org.uk>
+ *
+ * Copyright (C) 2002 Simon Evans
+ *
+ * Licence: GPL
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+
+#ifdef CONFIG_MTD_DEBUG
+static int debug = CONFIG_MTD_DEBUG_VERBOSE;
+MODULE_PARM(debug, "i");
+MODULE_PARM_DESC(debug, "Set Debug Level 0=quiet, 5=noisy");
+#undef DEBUG
+#define DEBUG(n, format, arg...) \
+	if (n <= debug) {	 \
+		printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __FUNCTION__ , ## arg); \
+	}
+
+#else
+#undef DEBUG
+#define DEBUG(n, arg...)
+static const int debug = 0;
+#endif
+
+#define err(format, arg...) printk(KERN_ERR "pcmciamtd: " format "\n" , ## arg)
+#define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING "pcmciamtd: " format "\n" , ## arg)
+
+
+#define DRIVER_DESC	"PCMCIA Flash memory card driver"
+#define DRIVER_VERSION	"$Revision: 1.51 $"
+
+/* Size of the PCMCIA address space: 26 bits = 64 MB */
+#define MAX_PCMCIA_ADDR	0x4000000
+
+struct pcmciamtd_dev {
+	dev_link_t	link;		/* PCMCIA link */
+	dev_node_t	node;		/* device node */
+	caddr_t		win_base;	/* ioremapped address of PCMCIA window */
+	unsigned int	win_size;	/* size of window */
+	unsigned int	offset;		/* offset into card the window currently points at */
+	struct map_info	pcmcia_map;
+	struct mtd_info	*mtd_info;
+	int		vpp;
+	char		mtd_name[sizeof(struct cistpl_vers_1_t)];
+};
+
+
+static dev_info_t dev_info = "pcmciamtd";
+static dev_link_t *dev_list;
+
+/* Module parameters */
+
+/* 2 = do 16-bit transfers, 1 = do 8-bit transfers */
+static int bankwidth = 2;
+
+/* Speed of memory accesses, in ns */
+static int mem_speed;
+
+/* Force the size of an SRAM card */
+static int force_size;
+
+/* Force Vpp */
+static int vpp;
+
+/* Set Vpp */
+static int setvpp;
+
+/* Force card to be treated as FLASH, ROM or RAM */
+static int mem_type;
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_PARM(bankwidth, "i");
+MODULE_PARM_DESC(bankwidth, "Set bankwidth (1=8 bit, 2=16 bit, default=2)");
+MODULE_PARM(mem_speed, "i");
+MODULE_PARM_DESC(mem_speed, "Set memory access speed in ns");
+MODULE_PARM(force_size, "i");
+MODULE_PARM_DESC(force_size, "Force size of card in MiB (1-64)");
+MODULE_PARM(setvpp, "i");
+MODULE_PARM_DESC(setvpp, "Set Vpp (0=Never, 1=On writes, 2=Always on, default=0)");
+MODULE_PARM(vpp, "i");
+MODULE_PARM_DESC(vpp, "Vpp value in 1/10ths eg 33=3.3V 120=12V (Dangerous)");
+MODULE_PARM(mem_type, "i");
+MODULE_PARM_DESC(mem_type, "Set Memory type (0=Flash, 1=RAM, 2=ROM, default=0)");
+
+
+/* read/write{8,16} copy_{from,to} routines with window remapping to access whole card */
+static caddr_t remap_window(struct map_info *map, unsigned long to)
+{
+	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
+	window_handle_t win = (window_handle_t)map->map_priv_2;
+	memreq_t mrq;
+	int ret;
+
+	if(!(dev->link.state & DEV_PRESENT)) {
+		DEBUG(1, "device removed state = 0x%4.4X", dev->link.state);
+		return 0;
+	}
+
+	mrq.CardOffset = to & ~(dev->win_size-1);
+	if(mrq.CardOffset != dev->offset) {
+		DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
+		      dev->offset, mrq.CardOffset);
+		mrq.Page = 0;
+		if( (ret = pcmcia_map_mem_page(win, &mrq)) != CS_SUCCESS) {
+			cs_error(dev->link.handle, MapMemPage, ret);
+			return NULL;
+		}
+		dev->offset = mrq.CardOffset;
+	}
+	return dev->win_base + (to & (dev->win_size-1));
+}
+
+
+static map_word pcmcia_read8_remap(struct map_info *map, unsigned long ofs)
+{
+	caddr_t addr;
+	map_word d = {{0}};
+
+	addr = remap_window(map, ofs);
+	if(!addr)
+		return d;
+
+	d.x[0] = readb(addr);
+	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02x", ofs, addr, d.x[0]);
+	return d;
+}
+
+
+static map_word pcmcia_read16_remap(struct map_info *map, unsigned long ofs)
+{
+	caddr_t addr;
+	map_word d = {{0}};
+
+	addr = remap_window(map, ofs);
+	if(!addr)
+		return d;
+
+	d.x[0] = readw(addr);
+	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04x", ofs, addr, d.x[0]);
+	return d;
+}
+
+
+static void pcmcia_copy_from_remap(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
+	unsigned long win_size = dev->win_size;
+
+	DEBUG(3, "to = %p from = %lu len = %u", to, from, len);
+	while(len) {
+		int toread = win_size - (from & (win_size-1));
+		caddr_t addr;
+
+		if(toread > len)
+			toread = len;
+		
+		addr = remap_window(map, from);
+		if(!addr)
+			return;
+
+		DEBUG(4, "memcpy from %p to %p len = %d", addr, to, toread);
+		memcpy_fromio(to, addr, toread);
+		len -= toread;
+		to += toread;
+		from += toread;
+	}
+}
+
+
+static void pcmcia_write8_remap(struct map_info *map, map_word d, unsigned long adr)
+{
+	caddr_t addr = remap_window(map, adr);
+
+	if(!addr)
+		return;
+
+	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%02x", adr, addr, d.x[0]);
+	writeb(d.x[0], addr);
+}
+
+
+static void pcmcia_write16_remap(struct map_info *map, map_word d, unsigned long adr)
+{
+	caddr_t addr = remap_window(map, adr);
+	if(!addr)
+		return;
+
+	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%04x", adr, addr, d.x[0]);
+	writew(d.x[0], addr);
+}
+
+
+static void pcmcia_copy_to_remap(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
+	unsigned long win_size = dev->win_size;
+
+	DEBUG(3, "to = %lu from = %p len = %u", to, from, len);
+	while(len) {
+		int towrite = win_size - (to & (win_size-1));
+		caddr_t addr;
+
+		if(towrite > len)
+			towrite = len;
+
+		addr = remap_window(map, to);
+		if(!addr)
+			return;
+
+		DEBUG(4, "memcpy from %p to %p len = %d", from, addr, towrite);
+		memcpy_toio(addr, from, towrite);
+		len -= towrite;
+		to += towrite;
+		from += towrite;
+	}
+}
+
+
+/* read/write{8,16} copy_{from,to} routines with direct access */
+
+#define DEV_REMOVED(x)  (!(*(u_int *)x->map_priv_1 & DEV_PRESENT))
+
+static map_word pcmcia_read8(struct map_info *map, unsigned long ofs)
+{
+	caddr_t win_base = (caddr_t)map->map_priv_2;
+	map_word d = {{0}};
+
+	if(DEV_REMOVED(map))
+		return d;
+
+	d.x[0] = readb(win_base + ofs);
+	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02x", ofs, win_base + ofs, d.x[0]);
+	return d;
+}
+
+
+static map_word pcmcia_read16(struct map_info *map, unsigned long ofs)
+{
+	caddr_t win_base = (caddr_t)map->map_priv_2;
+	map_word d = {{0}};
+
+	if(DEV_REMOVED(map))
+		return d;
+
+	d.x[0] = readw(win_base + ofs);
+	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04x", ofs, win_base + ofs, d.x[0]);
+	return d;
+}
+
+
+static void pcmcia_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	caddr_t win_base = (caddr_t)map->map_priv_2;
+
+	if(DEV_REMOVED(map))
+		return;
+
+	DEBUG(3, "to = %p from = %lu len = %u", to, from, len);
+	memcpy_fromio(to, win_base + from, len);
+}
+
+
+static void pcmcia_write8(struct map_info *map, u8 d, unsigned long adr)
+{
+	caddr_t win_base = (caddr_t)map->map_priv_2;
+
+	if(DEV_REMOVED(map))
+		return;
+
+	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%02x", adr, win_base + adr, d);
+	writeb(d, win_base + adr);
+}
+
+
+static void pcmcia_write16(struct map_info *map, u16 d, unsigned long adr)
+{
+	caddr_t win_base = (caddr_t)map->map_priv_2;
+
+	if(DEV_REMOVED(map))
+		return;
+
+	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%04x", adr, win_base + adr, d);
+	writew(d, win_base + adr);
+}
+
+
+static void pcmcia_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	caddr_t win_base = (caddr_t)map->map_priv_2;
+
+	if(DEV_REMOVED(map))
+		return;
+
+	DEBUG(3, "to = %lu from = %p len = %u", to, from, len);
+	memcpy_toio(win_base + to, from, len);
+}
+
+
+static void pcmciamtd_set_vpp(struct map_info *map, int on)
+{
+	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
+	dev_link_t *link = &dev->link;
+	modconf_t mod;
+	int ret;
+
+	mod.Attributes = CONF_VPP1_CHANGE_VALID | CONF_VPP2_CHANGE_VALID;
+	mod.Vcc = 0;
+	mod.Vpp1 = mod.Vpp2 = on ? dev->vpp : 0;
+
+	DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
+	ret = pcmcia_modify_configuration(link->handle, &mod);
+	if(ret != CS_SUCCESS) {
+		cs_error(link->handle, ModifyConfiguration, ret);
+	}
+}
+
+
+/* After a card is removed, pcmciamtd_release() will unregister the
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
+ */
+
+static void pcmciamtd_release(dev_link_t *link)
+{
+	struct pcmciamtd_dev *dev = link->priv;
+
+	DEBUG(3, "link = 0x%p", link);
+
+	if (link->win) {
+		if(dev->win_base) {
+			iounmap(dev->win_base);
+			dev->win_base = NULL;
+		}
+		pcmcia_release_window(link->win);
+	}
+	pcmcia_release_configuration(link->handle);
+	link->state &= ~DEV_CONFIG;
+}
+
+
+static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_name)
+{
+	int rc;
+	tuple_t tuple;
+	cisparse_t parse;
+	u_char buf[64];
+
+	tuple.Attributes = 0;
+	tuple.TupleData = (cisdata_t *)buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+	tuple.DesiredTuple = RETURN_FIRST_TUPLE;
+
+	rc = pcmcia_get_first_tuple(link->handle, &tuple);
+	while(rc == CS_SUCCESS) {
+		rc = pcmcia_get_tuple_data(link->handle, &tuple);
+		if(rc != CS_SUCCESS) {
+			cs_error(link->handle, GetTupleData, rc);
+			break;
+		}
+		rc = pcmcia_parse_tuple(link->handle, &tuple, &parse);
+		if(rc != CS_SUCCESS) {
+			cs_error(link->handle, ParseTuple, rc);
+			break;
+		}
+		
+		switch(tuple.TupleCode) {
+		case  CISTPL_FORMAT: {
+			cistpl_format_t *t = &parse.format;
+			(void)t; /* Shut up, gcc */
+			DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
+			      t->type, t->edc, t->offset, t->length);
+			break;
+			
+		}
+			
+		case CISTPL_DEVICE: {
+			cistpl_device_t *t = &parse.device;
+			int i;
+			DEBUG(2, "Common memory:");
+			dev->pcmcia_map.size = t->dev[0].size;
+			for(i = 0; i < t->ndev; i++) {
+				DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
+				DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
+				DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
+				DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
+			}
+			break;
+		}
+			
+		case CISTPL_VERS_1: {
+			cistpl_vers_1_t *t = &parse.version_1;
+			int i;
+			if(t->ns) {
+				dev->mtd_name[0] = '\0';
+				for(i = 0; i < t->ns; i++) {
+					if(i)
+						strcat(dev->mtd_name, " ");
+					strcat(dev->mtd_name, t->str+t->ofs[i]);
+				}
+			}
+			DEBUG(2, "Found name: %s", dev->mtd_name);
+			break;
+		}
+			
+		case CISTPL_JEDEC_C: {
+			cistpl_jedec_t *t = &parse.jedec;
+			int i;
+			for(i = 0; i < t->nid; i++) {
+				DEBUG(2, "JEDEC: 0x%02x 0x%02x", t->id[i].mfr, t->id[i].info);
+			}
+			break;
+		}
+			
+		case CISTPL_DEVICE_GEO: {
+			cistpl_device_geo_t *t = &parse.device_geo;
+			int i;
+			dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
+			for(i = 0; i < t->ngeo; i++) {
+				DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
+				DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
+				DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
+				DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
+				DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
+				DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
+			}
+			break;
+		}
+			
+		default:
+			DEBUG(2, "Unknown tuple code %d", tuple.TupleCode);
+		}
+		
+		rc = pcmcia_get_next_tuple(link->handle, &tuple);
+	}
+	if(!dev->pcmcia_map.size)
+		dev->pcmcia_map.size = MAX_PCMCIA_ADDR;
+
+	if(!dev->pcmcia_map.bankwidth)
+		dev->pcmcia_map.bankwidth = 2;
+
+	if(force_size) {
+		dev->pcmcia_map.size = force_size << 20;
+		DEBUG(2, "size forced to %dM", force_size);
+	}
+
+	if(bankwidth) {
+		dev->pcmcia_map.bankwidth = bankwidth;
+		DEBUG(2, "bankwidth forced to %d", bankwidth);
+	}		
+
+	dev->pcmcia_map.name = dev->mtd_name;
+	if(!dev->mtd_name[0]) {
+		strcpy(dev->mtd_name, "PCMCIA Memory card");
+		*new_name = 1;
+	}
+
+	DEBUG(1, "Device: Size: %lu Width:%d Name: %s",
+	      dev->pcmcia_map.size, dev->pcmcia_map.bankwidth << 3, dev->mtd_name);
+}
+
+
+/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event
+ * is received, to configure the PCMCIA socket, and to make the
+ * MTD device available to the system.
+ */
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void pcmciamtd_config(dev_link_t *link)
+{
+	struct pcmciamtd_dev *dev = link->priv;
+	struct mtd_info *mtd = NULL;
+	cs_status_t status;
+	win_req_t req;
+	int last_ret = 0, last_fn = 0;
+	int ret;
+	int i;
+	config_info_t t;
+	static char *probes[] = { "jedec_probe", "cfi_probe" };
+	cisinfo_t cisinfo;
+	int new_name = 0;
+
+	DEBUG(3, "link=0x%p", link);
+
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+
+	DEBUG(2, "Validating CIS");
+	ret = pcmcia_validate_cis(link->handle, &cisinfo);
+	if(ret != CS_SUCCESS) {
+		cs_error(link->handle, GetTupleData, ret);
+	} else {
+		DEBUG(2, "ValidateCIS found %d chains", cisinfo.Chains);
+	}
+
+	card_settings(dev, link, &new_name);
+
+	dev->pcmcia_map.phys = NO_XIP;
+	dev->pcmcia_map.copy_from = pcmcia_copy_from_remap;
+	dev->pcmcia_map.copy_to = pcmcia_copy_to_remap;
+	if (dev->pcmcia_map.bankwidth == 1) {
+		dev->pcmcia_map.read = pcmcia_read8_remap;
+		dev->pcmcia_map.write = pcmcia_write8_remap;
+	} else {
+		dev->pcmcia_map.read = pcmcia_read16_remap;
+		dev->pcmcia_map.write = pcmcia_write16_remap;
+	}
+	if(setvpp == 1)
+		dev->pcmcia_map.set_vpp = pcmciamtd_set_vpp;
+
+	/* Request a memory window for PCMCIA. Some architeures can map windows upto the maximum
+	   that PCMCIA can support (64MiB) - this is ideal and we aim for a window the size of the
+	   whole card - otherwise we try smaller windows until we succeed */
+
+	req.Attributes =  WIN_MEMORY_TYPE_CM | WIN_ENABLE;
+	req.Attributes |= (dev->pcmcia_map.bankwidth == 1) ? WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16;
+	req.Base = 0;
+	req.AccessSpeed = mem_speed;
+	link->win = (window_handle_t)link->handle;
+	req.Size = (force_size) ? force_size << 20 : MAX_PCMCIA_ADDR;
+	dev->win_size = 0;
+
+	do {
+		int ret;
+		DEBUG(2, "requesting window with size = %dKiB memspeed = %d",
+		      req.Size >> 10, req.AccessSpeed);
+		ret = pcmcia_request_window(&link->handle, &req, &link->win);
+		DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
+		if(ret) {
+			req.Size >>= 1;
+		} else {
+			DEBUG(2, "Got window of size %dKiB", req.Size >> 10);
+			dev->win_size = req.Size;
+			break;
+		}
+	} while(req.Size >= 0x1000);
+
+	DEBUG(2, "dev->win_size = %d", dev->win_size);
+
+	if(!dev->win_size) {
+		err("Cant allocate memory window");
+		pcmciamtd_release(link);
+		return;
+	}
+	DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
+		
+	/* Get write protect status */
+	CS_CHECK(GetStatus, pcmcia_get_status(link->handle, &status));
+	DEBUG(2, "status value: 0x%x window handle = 0x%8.8lx",
+	      status.CardState, (unsigned long)link->win);
+	dev->win_base = ioremap(req.Base, req.Size);
+	if(!dev->win_base) {
+		err("ioremap(%lu, %u) failed", req.Base, req.Size);
+		pcmciamtd_release(link);
+		return;
+	}
+	DEBUG(1, "mapped window dev = %p req.base = 0x%lx base = %p size = 0x%x",
+	      dev, req.Base, dev->win_base, req.Size);
+
+	dev->offset = 0;
+	dev->pcmcia_map.map_priv_1 = (unsigned long)dev;
+	dev->pcmcia_map.map_priv_2 = (unsigned long)link->win;
+
+	DEBUG(2, "Getting configuration");
+	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link->handle, &t));
+	DEBUG(2, "Vcc = %d Vpp1 = %d Vpp2 = %d", t.Vcc, t.Vpp1, t.Vpp2);
+	dev->vpp = (vpp) ? vpp : t.Vpp1;
+	link->conf.Attributes = 0;
+	link->conf.Vcc = t.Vcc;
+	if(setvpp == 2) {
+		link->conf.Vpp1 = dev->vpp;
+		link->conf.Vpp2 = dev->vpp;
+	} else {
+		link->conf.Vpp1 = 0;
+		link->conf.Vpp2 = 0;
+	}
+
+	link->conf.IntType = INT_MEMORY;
+	link->conf.ConfigBase = t.ConfigBase;
+	link->conf.Status = t.Status;
+	link->conf.Pin = t.Pin;
+	link->conf.Copy = t.Copy;
+	link->conf.ExtStatus = t.ExtStatus;
+	link->conf.ConfigIndex = 0;
+	link->conf.Present = t.Present;
+	DEBUG(2, "Setting Configuration");
+	ret = pcmcia_request_configuration(link->handle, &link->conf);
+	if(ret != CS_SUCCESS) {
+		cs_error(link->handle, RequestConfiguration, ret);
+	}
+
+	if(mem_type == 1) {
+		mtd = do_map_probe("map_ram", &dev->pcmcia_map);
+	} else if(mem_type == 2) {
+		mtd = do_map_probe("map_rom", &dev->pcmcia_map);
+	} else {
+		for(i = 0; i < sizeof(probes) / sizeof(char *); i++) {
+			DEBUG(1, "Trying %s", probes[i]);
+			mtd = do_map_probe(probes[i], &dev->pcmcia_map);
+			if(mtd)
+				break;
+			
+			DEBUG(1, "FAILED: %s", probes[i]);
+		}
+	}
+	
+	if(!mtd) {
+		DEBUG(1, "Cant find an MTD");
+		pcmciamtd_release(link);
+		return;
+	}
+
+	dev->mtd_info = mtd;
+	mtd->owner = THIS_MODULE;
+
+	if(new_name) {
+		int size = 0;
+		char unit = ' ';
+		/* Since we are using a default name, make it better by adding in the
+		   size */
+		if(mtd->size < 1048576) { /* <1MiB in size, show size in KiB */
+			size = mtd->size >> 10;
+			unit = 'K';
+		} else {
+			size = mtd->size >> 20;
+			unit = 'M';
+		}
+		snprintf(dev->mtd_name, sizeof(dev->mtd_name), "%d%ciB %s", size, unit, "PCMCIA Memory card");
+	}
+
+	/* If the memory found is fits completely into the mapped PCMCIA window,
+	   use the faster non-remapping read/write functions */
+	if(mtd->size <= dev->win_size) {
+		DEBUG(1, "Using non remapping memory functions");
+		dev->pcmcia_map.map_priv_1 = (unsigned long)&(dev->link.state);
+		dev->pcmcia_map.map_priv_2 = (unsigned long)dev->win_base;
+		if (dev->pcmcia_map.bankwidth == 1) {
+			dev->pcmcia_map.read = pcmcia_read8;
+			dev->pcmcia_map.write = pcmcia_write8;
+		} else {
+			dev->pcmcia_map.read = pcmcia_read16;
+			dev->pcmcia_map.write = pcmcia_write16;
+		}
+		dev->pcmcia_map.copy_from = pcmcia_copy_from;
+		dev->pcmcia_map.copy_to = pcmcia_copy_to;
+	}
+
+	if(add_mtd_device(mtd)) {
+		map_destroy(mtd);
+		dev->mtd_info = NULL;
+		err("Couldnt register MTD device");
+		pcmciamtd_release(link);
+		return;
+	}
+	snprintf(dev->node.dev_name, sizeof(dev->node.dev_name), "mtd%d", mtd->index);
+	info("mtd%d: %s", mtd->index, mtd->name);
+	link->state &= ~DEV_CONFIG_PENDING;
+	link->dev = &dev->node;
+	return;
+
+ cs_failed:
+	cs_error(link->handle, last_fn, last_ret);
+	err("CS Error, exiting");
+	pcmciamtd_release(link);
+	return;
+}
+
+
+/* The card status event handler.  Mostly, this schedules other
+ * stuff to run after an event is received.  A CARD_REMOVAL event
+ * also sets some flags to discourage the driver from trying
+ * to talk to the card any more.
+ */
+
+static int pcmciamtd_event(event_t event, int priority,
+			event_callback_args_t *args)
+{
+	dev_link_t *link = args->client_data;
+
+	DEBUG(1, "event=0x%06x", event);
+	switch (event) {
+	case CS_EVENT_CARD_REMOVAL:
+		DEBUG(2, "EVENT_CARD_REMOVAL");
+		link->state &= ~DEV_PRESENT;
+		if (link->state & DEV_CONFIG) {
+			struct pcmciamtd_dev *dev = link->priv;
+			if(dev->mtd_info) {
+				del_mtd_device(dev->mtd_info);
+				info("mtd%d: Removed", dev->mtd_info->index);
+			}
+			pcmciamtd_release(link);
+		}
+		break;
+	case CS_EVENT_CARD_INSERTION:
+		DEBUG(2, "EVENT_CARD_INSERTION");
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		pcmciamtd_config(link);
+		break;
+	case CS_EVENT_PM_SUSPEND:
+		DEBUG(2, "EVENT_PM_SUSPEND");
+		link->state |= DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_RESET_PHYSICAL:
+		DEBUG(2, "EVENT_RESET_PHYSICAL");
+		/* get_lock(link); */
+		break;
+	case CS_EVENT_PM_RESUME:
+		DEBUG(2, "EVENT_PM_RESUME");
+		link->state &= ~DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_CARD_RESET:
+		DEBUG(2, "EVENT_CARD_RESET");
+		/* free_lock(link); */
+		break;
+	default:
+		DEBUG(2, "Unknown event %d", event);
+	}
+	return 0;
+}
+
+
+/* This deletes a driver "instance".  The device is de-registered
+ * with Card Services.  If it has been released, all local data
+ * structures are freed.  Otherwise, the structures will be freed
+ * when the device is released.
+ */
+
+static void pcmciamtd_detach(dev_link_t *link)
+{
+	DEBUG(3, "link=0x%p", link);
+
+	if(link->state & DEV_CONFIG) {
+		pcmciamtd_release(link);
+	}
+
+	if (link->handle) {
+		int ret;
+		DEBUG(2, "Deregistering with card services");
+		ret = pcmcia_deregister_client(link->handle);
+		if (ret != CS_SUCCESS)
+			cs_error(link->handle, DeregisterClient, ret);
+	}
+
+	link->state |= DEV_STALE_LINK;
+}
+
+
+/* pcmciamtd_attach() creates an "instance" of the driver, allocating
+ * local data structures for one device.  The device is registered
+ * with Card Services.
+ */
+
+static dev_link_t *pcmciamtd_attach(void)
+{
+	struct pcmciamtd_dev *dev;
+	dev_link_t *link;
+	client_reg_t client_reg;
+	int ret;
+
+	/* Create new memory card device */
+	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) return NULL;
+	DEBUG(1, "dev=0x%p", dev);
+
+	memset(dev, 0, sizeof(*dev));
+	link = &dev->link;
+	link->priv = dev;
+
+	link->conf.Attributes = 0;
+	link->conf.IntType = INT_MEMORY;
+
+	link->next = dev_list;
+	dev_list = link;
+
+	/* Register with Card Services */
+	client_reg.dev_info = &dev_info;
+	client_reg.EventMask =
+		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.event_handler = &pcmciamtd_event;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+	DEBUG(2, "Calling RegisterClient");
+	ret = pcmcia_register_client(&link->handle, &client_reg);
+	if (ret != 0) {
+		cs_error(link->handle, RegisterClient, ret);
+		pcmciamtd_detach(link);
+		return NULL;
+	}
+	DEBUG(2, "link = %p", link);
+	return link;
+}
+
+
+static struct pcmcia_driver pcmciamtd_driver = {
+	.drv		= {
+		.name	= "pcmciamtd"
+	},
+	.attach		= pcmciamtd_attach,
+	.detach		= pcmciamtd_detach,
+	.owner		= THIS_MODULE
+};
+
+
+static int __init init_pcmciamtd(void)
+{
+	info(DRIVER_DESC " " DRIVER_VERSION);
+
+	if(bankwidth && bankwidth != 1 && bankwidth != 2) {
+		info("bad bankwidth (%d), using default", bankwidth);
+		bankwidth = 2;
+	}
+	if(force_size && (force_size < 1 || force_size > 64)) {
+		info("bad force_size (%d), using default", force_size);
+		force_size = 0;
+	}
+	if(mem_type && mem_type != 1 && mem_type != 2) {
+		info("bad mem_type (%d), using default", mem_type);
+		mem_type = 0;
+	}
+	return pcmcia_register_driver(&pcmciamtd_driver);
+}
+
+
+static void __exit exit_pcmciamtd(void)
+{
+	DEBUG(1, DRIVER_DESC " unloading");
+	pcmcia_unregister_driver(&pcmciamtd_driver);
+	BUG_ON(dev_list != NULL);
+}
+
+module_init(init_pcmciamtd);
+module_exit(exit_pcmciamtd);
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
new file mode 100644
index 000000000000..b853670bfb81
--- /dev/null
+++ b/drivers/mtd/maps/physmap.c
@@ -0,0 +1,125 @@
+/*
+ * $Id: physmap.c,v 1.37 2004/11/28 09:40:40 dwmw2 Exp $
+ *
+ * Normal mappings of chips in physical memory
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * 031022 - [jsun] add run-time configure and partition setup
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/config.h>
+#include <linux/mtd/partitions.h>
+
+static struct mtd_info *mymtd;
+
+struct map_info physmap_map = {
+	.name = "phys_mapped_flash",
+	.phys = CONFIG_MTD_PHYSMAP_START,
+	.size = CONFIG_MTD_PHYSMAP_LEN,
+	.bankwidth = CONFIG_MTD_PHYSMAP_BANKWIDTH,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition *mtd_parts;
+static int                   mtd_parts_nb;
+
+static int num_physmap_partitions;
+static struct mtd_partition *physmap_partitions;
+
+static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
+
+void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
+{
+	physmap_partitions=parts;
+	num_physmap_partitions=num_parts;
+}
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static int __init init_physmap(void)
+{
+	static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
+	const char **type;
+
+       	printk(KERN_NOTICE "physmap flash device: %lx at %lx\n", physmap_map.size, physmap_map.phys);
+	physmap_map.virt = ioremap(physmap_map.phys, physmap_map.size);
+
+	if (!physmap_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+
+	simple_map_init(&physmap_map);
+
+	mymtd = NULL;
+	type = rom_probe_types;
+	for(; !mymtd && *type; type++) {
+		mymtd = do_map_probe(*type, &physmap_map);
+	}
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+		mtd_parts_nb = parse_mtd_partitions(mymtd, part_probes, 
+						    &mtd_parts, 0);
+
+		if (mtd_parts_nb > 0)
+		{
+			add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb);
+			return 0;
+		}
+
+		if (num_physmap_partitions != 0) 
+		{
+			printk(KERN_NOTICE 
+			       "Using physmap partition definition\n");
+			add_mtd_partitions (mymtd, physmap_partitions, num_physmap_partitions);
+			return 0;
+		}
+
+#endif
+		add_mtd_device(mymtd);
+
+		return 0;
+	}
+
+	iounmap(physmap_map.virt);
+	return -ENXIO;
+}
+
+static void __exit cleanup_physmap(void)
+{
+#ifdef CONFIG_MTD_PARTITIONS
+	if (mtd_parts_nb) {
+		del_mtd_partitions(mymtd);
+		kfree(mtd_parts);
+	} else if (num_physmap_partitions) {
+		del_mtd_partitions(mymtd);
+	} else {
+		del_mtd_device(mymtd);
+	}
+#else
+	del_mtd_device(mymtd);
+#endif
+	map_destroy(mymtd);
+
+	iounmap(physmap_map.virt);
+	physmap_map.virt = NULL;
+}
+
+module_init(init_physmap);
+module_exit(cleanup_physmap);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Generic configurable MTD map driver");
diff --git a/drivers/mtd/maps/pnc2000.c b/drivers/mtd/maps/pnc2000.c
new file mode 100644
index 000000000000..a0f43dad8985
--- /dev/null
+++ b/drivers/mtd/maps/pnc2000.c
@@ -0,0 +1,93 @@
+/*
+ *	pnc2000.c - mapper for Photron PNC-2000 board.
+ *
+ * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp>
+ *
+ * This code is GPL
+ *
+ * $Id: pnc2000.c,v 1.17 2004/11/16 18:29:02 dwmw2 Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+
+#define WINDOW_ADDR 0xbf000000
+#define WINDOW_SIZE 0x00400000
+
+/* 
+ * MAP DRIVER STUFF
+ */
+
+
+static struct map_info pnc_map = {
+	.name = "PNC-2000",
+	.size = WINDOW_SIZE,
+	.bankwidth = 4,
+	.phys = 0xFFFFFFFF,
+	.virt = (void __iomem *)WINDOW_ADDR,
+};
+
+
+/*
+ * MTD 'PARTITIONING' STUFF 
+ */
+static struct mtd_partition pnc_partitions[3] = {
+	{
+		.name = "PNC-2000 boot firmware",
+		.size = 0x20000,
+		.offset = 0
+	},
+	{
+		.name = "PNC-2000 kernel",
+		.size = 0x1a0000,
+		.offset = 0x20000
+	},
+	{
+		.name = "PNC-2000 filesystem",
+		.size = 0x240000,
+		.offset = 0x1c0000
+	}
+};
+
+/* 
+ * This is the master MTD device for which all the others are just
+ * auto-relocating aliases.
+ */
+static struct mtd_info *mymtd;
+
+static int __init init_pnc2000(void)
+{
+	printk(KERN_NOTICE "Photron PNC-2000 flash mapping: %x at %x\n", WINDOW_SIZE, WINDOW_ADDR);
+
+	simple_map_init(&pnc_map);
+
+	mymtd = do_map_probe("cfi_probe", &pnc_map);
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+		return add_mtd_partitions(mymtd, pnc_partitions, 3);
+	}
+
+	return -ENXIO;
+}
+
+static void __exit cleanup_pnc2000(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+}
+
+module_init(init_pnc2000);
+module_exit(cleanup_pnc2000);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Crossnet Co. <info@crossnet.co.jp>");
+MODULE_DESCRIPTION("MTD map driver for Photron PNC-2000 board");
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
new file mode 100644
index 000000000000..edd01ee4f90b
--- /dev/null
+++ b/drivers/mtd/maps/redwood.c
@@ -0,0 +1,169 @@
+/*
+ * $Id: redwood.c,v 1.10 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * drivers/mtd/maps/redwood.c
+ *
+ * FLASH map for the IBM Redwood 4/5/6 boards.
+ *
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#if !defined (CONFIG_REDWOOD_6)
+
+#define WINDOW_ADDR 0xffc00000
+#define WINDOW_SIZE 0x00400000
+
+#define RW_PART0_OF	0
+#define RW_PART0_SZ	0x10000
+#define RW_PART1_OF	RW_PART0_SZ
+#define RW_PART1_SZ	0x200000 - 0x10000
+#define RW_PART2_OF	0x200000
+#define RW_PART2_SZ	0x10000
+#define RW_PART3_OF	0x210000
+#define RW_PART3_SZ	0x200000 - (0x10000 + 0x20000)
+#define RW_PART4_OF	0x3e0000
+#define RW_PART4_SZ	0x20000
+
+static struct mtd_partition redwood_flash_partitions[] = {
+	{
+		.name = "Redwood OpenBIOS Vital Product Data",
+		.offset = RW_PART0_OF,
+		.size = RW_PART0_SZ,
+		.mask_flags = MTD_WRITEABLE	/* force read-only */
+	},
+	{
+		.name = "Redwood kernel",
+		.offset = RW_PART1_OF,
+		.size = RW_PART1_SZ
+	},
+	{
+		.name = "Redwood OpenBIOS non-volatile storage",
+		.offset = RW_PART2_OF,
+		.size = RW_PART2_SZ,
+		.mask_flags = MTD_WRITEABLE	/* force read-only */
+	},
+	{
+		.name = "Redwood filesystem",
+		.offset = RW_PART3_OF,
+		.size = RW_PART3_SZ
+	},
+	{
+		.name = "Redwood OpenBIOS",
+		.offset = RW_PART4_OF,
+		.size = RW_PART4_SZ,
+		.mask_flags = MTD_WRITEABLE	/* force read-only */
+	}
+};
+
+#else /* CONFIG_REDWOOD_6 */
+/* FIXME: the window is bigger - armin */
+#define WINDOW_ADDR 0xff800000
+#define WINDOW_SIZE 0x00800000
+
+#define RW_PART0_OF	0
+#define RW_PART0_SZ	0x400000	/* 4 MiB data */
+#define RW_PART1_OF	RW_PART0_OF + RW_PART0_SZ 
+#define RW_PART1_SZ	0x10000		/* 64K VPD */
+#define RW_PART2_OF	RW_PART1_OF + RW_PART1_SZ
+#define RW_PART2_SZ	0x400000 - (0x10000 + 0x20000)
+#define RW_PART3_OF	RW_PART2_OF + RW_PART2_SZ
+#define RW_PART3_SZ	0x20000
+
+static struct mtd_partition redwood_flash_partitions[] = {
+	{
+		.name = "Redwood filesystem",
+		.offset = RW_PART0_OF,
+		.size = RW_PART0_SZ
+	},
+	{
+		.name = "Redwood OpenBIOS Vital Product Data",
+		.offset = RW_PART1_OF,
+		.size = RW_PART1_SZ,
+		.mask_flags = MTD_WRITEABLE	/* force read-only */
+	},
+	{
+		.name = "Redwood kernel",
+		.offset = RW_PART2_OF,
+		.size = RW_PART2_SZ
+	},
+	{
+		.name = "Redwood OpenBIOS",
+		.offset = RW_PART3_OF,
+		.size = RW_PART3_SZ,
+		.mask_flags = MTD_WRITEABLE	/* force read-only */
+	}
+};
+
+#endif /* CONFIG_REDWOOD_6 */
+
+struct map_info redwood_flash_map = {
+	.name = "IBM Redwood",
+	.size = WINDOW_SIZE,
+	.bankwidth = 2,
+	.phys = WINDOW_ADDR,
+};
+
+
+#define NUM_REDWOOD_FLASH_PARTITIONS \
+	(sizeof(redwood_flash_partitions)/sizeof(redwood_flash_partitions[0]))
+
+static struct mtd_info *redwood_mtd;
+
+int __init init_redwood_flash(void)
+{
+	printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n",
+			WINDOW_SIZE, WINDOW_ADDR);
+
+	redwood_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
+
+	if (!redwood_flash_map.virt) {
+		printk("init_redwood_flash: failed to ioremap\n");
+		return -EIO;
+	}
+	simple_map_init(&redwood_flash_map);
+
+	redwood_mtd = do_map_probe("cfi_probe",&redwood_flash_map);
+
+	if (redwood_mtd) {
+		redwood_mtd->owner = THIS_MODULE;
+		return add_mtd_partitions(redwood_mtd,
+				redwood_flash_partitions,
+				NUM_REDWOOD_FLASH_PARTITIONS);
+	}
+
+	return -ENXIO;
+}
+
+static void __exit cleanup_redwood_flash(void)
+{
+	if (redwood_mtd) {
+		del_mtd_partitions(redwood_mtd);
+		/* moved iounmap after map_destroy - armin */
+		map_destroy(redwood_mtd);
+		iounmap((void *)redwood_flash_map.virt);
+	}
+}
+
+module_init(init_redwood_flash);
+module_exit(cleanup_redwood_flash);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("MontaVista Software <source@mvista.com>");
+MODULE_DESCRIPTION("MTD map driver for the IBM Redwood reference boards");
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
new file mode 100644
index 000000000000..809a0c8e7aaf
--- /dev/null
+++ b/drivers/mtd/maps/rpxlite.c
@@ -0,0 +1,66 @@
+/*
+ * $Id: rpxlite.c,v 1.22 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * Handle mapping of the flash on the RPX Lite and CLLF boards
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+
+#define WINDOW_ADDR 0xfe000000
+#define WINDOW_SIZE 0x800000
+
+static struct mtd_info *mymtd;
+
+static struct map_info rpxlite_map = {
+	.name = "RPX",
+	.size = WINDOW_SIZE,
+	.bankwidth = 4,
+	.phys = WINDOW_ADDR,
+};
+
+int __init init_rpxlite(void)
+{
+	printk(KERN_NOTICE "RPX Lite or CLLF flash device: %x at %x\n", WINDOW_SIZE*4, WINDOW_ADDR);
+	rpxlite_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4);
+
+	if (!rpxlite_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	simple_map_init(&rpxlite_map);
+	mymtd = do_map_probe("cfi_probe", &rpxlite_map);
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+		add_mtd_device(mymtd);
+		return 0;
+	}
+
+	iounmap((void *)rpxlite_map.virt);
+	return -ENXIO;
+}
+
+static void __exit cleanup_rpxlite(void)
+{
+	if (mymtd) {
+		del_mtd_device(mymtd);
+		map_destroy(mymtd);
+	}
+	if (rpxlite_map.virt) {
+		iounmap((void *)rpxlite_map.virt);
+		rpxlite_map.virt = 0;
+	}
+}
+
+module_init(init_rpxlite);
+module_exit(cleanup_rpxlite);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arnold Christensen <AKC@pel.dk>");
+MODULE_DESCRIPTION("MTD map driver for RPX Lite and CLLF boards");
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
new file mode 100644
index 000000000000..0a6f861c4cd6
--- /dev/null
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -0,0 +1,453 @@
+/*
+ * Flash memory access on SA11x0 based devices
+ * 
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ * 
+ * $Id: sa1100-flash.c,v 1.47 2004/11/01 13:44:36 rmk Exp $
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
+
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <asm/mach/flash.h>
+
+#if 0
+/*
+ * This is here for documentation purposes only - until these people
+ * submit their machine types.  It will be gone January 2005.
+ */
+static struct mtd_partition consus_partitions[] = {
+	{
+		.name		= "Consus boot firmware",
+		.offset		= 0,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITABLE, /* force read-only */
+	}, {
+		.name		= "Consus kernel",
+		.offset		= 0x00040000,
+		.size		= 0x00100000,
+		.mask_flags	= 0,
+	}, {
+		.name		= "Consus disk",
+		.offset		= 0x00140000,
+		/* The rest (up to 16M) for jffs.  We could put 0 and
+		   make it find the size automatically, but right now
+		   i have 32 megs.  jffs will use all 32 megs if given
+		   the chance, and this leads to horrible problems
+		   when you try to re-flash the image because blob
+		   won't erase the whole partition. */
+		.size		= 0x01000000 - 0x00140000,
+		.mask_flags	= 0,
+	}, {
+		/* this disk is a secondary disk, which can be used as
+		   needed, for simplicity, make it the size of the other
+		   consus partition, although realistically it could be
+		   the remainder of the disk (depending on the file
+		   system used) */
+		 .name		= "Consus disk2",
+		 .offset	= 0x01000000,
+		 .size		= 0x01000000 - 0x00140000,
+		 .mask_flags	= 0,
+	}
+};
+
+/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */
+static struct mtd_partition frodo_partitions[] =
+{
+	{
+		.name		= "bootloader",
+		.size		= 0x00040000,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "bootloader params",
+		.size		= 0x00040000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "kernel",
+		.size		= 0x00100000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "ramdisk",
+		.size		= 0x00400000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "file system",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND
+	}
+};
+
+static struct mtd_partition jornada56x_partitions[] = {
+	{
+		.name		= "bootldr",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "rootfs",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	}
+};
+
+static void jornada56x_set_vpp(int vpp)
+{
+	if (vpp)
+		GPSR = GPIO_GPIO26;
+	else
+		GPCR = GPIO_GPIO26;
+	GPDR |= GPIO_GPIO26;
+}
+
+/*
+ * Machine        Phys          Size    set_vpp
+ * Consus    : SA1100_CS0_PHYS SZ_32M
+ * Frodo     : SA1100_CS0_PHYS SZ_32M
+ * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp
+ */
+#endif
+
+struct sa_subdev_info {
+	char name[16];
+	struct map_info map;
+	struct mtd_info *mtd;
+	struct flash_platform_data *data;
+};
+
+struct sa_info {
+	struct mtd_partition	*parts;
+	struct mtd_info		*mtd;
+	int			num_subdev;
+	struct sa_subdev_info	subdev[0];
+};
+
+static void sa1100_set_vpp(struct map_info *map, int on)
+{
+	struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map);
+	subdev->data->set_vpp(on);
+}
+
+static void sa1100_destroy_subdev(struct sa_subdev_info *subdev)
+{
+	if (subdev->mtd)
+		map_destroy(subdev->mtd);
+	if (subdev->map.virt)
+		iounmap(subdev->map.virt);
+	release_mem_region(subdev->map.phys, subdev->map.size);
+}
+
+static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *res)
+{
+	unsigned long phys;
+	unsigned int size;
+	int ret;
+
+	phys = res->start;
+	size = res->end - phys + 1;
+
+	/*
+	 * Retrieve the bankwidth from the MSC registers.
+	 * We currently only implement CS0 and CS1 here.
+	 */
+	switch (phys) {
+	default:
+		printk(KERN_WARNING "SA1100 flash: unknown base address "
+		       "0x%08lx, assuming CS0\n", phys);
+
+	case SA1100_CS0_PHYS:
+		subdev->map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
+		break;
+
+	case SA1100_CS1_PHYS:
+		subdev->map.bankwidth = ((MSC0 >> 16) & MSC_RBW) ? 2 : 4;
+		break;
+	}
+
+	if (!request_mem_region(phys, size, subdev->name)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (subdev->data->set_vpp)
+		subdev->map.set_vpp = sa1100_set_vpp;
+
+	subdev->map.phys = phys;
+	subdev->map.size = size;
+	subdev->map.virt = ioremap(phys, size);
+	if (!subdev->map.virt) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	simple_map_init(&subdev->map);
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	subdev->mtd = do_map_probe(subdev->data->map_name, &subdev->map);
+	if (subdev->mtd == NULL) {
+		ret = -ENXIO;
+		goto err;
+	}
+	subdev->mtd->owner = THIS_MODULE;
+
+	printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, "
+		"%d-bit\n", phys, subdev->mtd->size >> 20,
+		subdev->map.bankwidth * 8);
+
+	return 0;
+
+ err:
+	sa1100_destroy_subdev(subdev);
+ out:
+	return ret;
+}
+
+static void sa1100_destroy(struct sa_info *info)
+{
+	int i;
+
+	if (info->mtd) {
+		del_mtd_partitions(info->mtd);
+
+#ifdef CONFIG_MTD_CONCAT
+		if (info->mtd != info->subdev[0].mtd)
+			mtd_concat_destroy(info->mtd);
+#endif
+	}
+
+	if (info->parts)
+		kfree(info->parts);
+
+	for (i = info->num_subdev - 1; i >= 0; i--)
+		sa1100_destroy_subdev(&info->subdev[i]);
+	kfree(info);
+}
+
+static struct sa_info *__init
+sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash)
+{
+	struct sa_info *info;
+	int nr, size, i, ret = 0;
+
+	/*
+	 * Count number of devices.
+	 */
+	for (nr = 0; ; nr++)
+		if (!platform_get_resource(pdev, IORESOURCE_MEM, nr))
+			break;
+
+	if (nr == 0) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	size = sizeof(struct sa_info) + sizeof(struct sa_subdev_info) * nr;
+
+	/*
+	 * Allocate the map_info structs in one go.
+	 */
+	info = kmalloc(size, GFP_KERNEL);
+	if (!info) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(info, 0, size);
+
+	/*
+	 * Claim and then map the memory regions.
+	 */
+	for (i = 0; i < nr; i++) {
+		struct sa_subdev_info *subdev = &info->subdev[i];
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+
+		subdev->map.name = subdev->name;
+		sprintf(subdev->name, "sa1100-%d", i);
+		subdev->data = flash;
+
+		ret = sa1100_probe_subdev(subdev, res);
+		if (ret)
+			break;
+	}
+
+	info->num_subdev = i;
+
+	/*
+	 * ENXIO is special.  It means we didn't find a chip when we probed.
+	 */
+	if (ret != 0 && !(ret == -ENXIO && info->num_subdev > 0))
+		goto err;
+
+	/*
+	 * If we found one device, don't bother with concat support.  If
+	 * we found multiple devices, use concat if we have it available,
+	 * otherwise fail.  Either way, it'll be called "sa1100".
+	 */
+	if (info->num_subdev == 1) {
+		strcpy(info->subdev[0].name, "sa1100");
+		info->mtd = info->subdev[0].mtd;
+		ret = 0;
+	} else if (info->num_subdev > 1) {
+#ifdef CONFIG_MTD_CONCAT
+		struct mtd_info *cdev[nr];
+		/*
+		 * We detected multiple devices.  Concatenate them together.
+		 */
+		for (i = 0; i < info->num_subdev; i++)
+			cdev[i] = info->subdev[i].mtd;
+
+		info->mtd = mtd_concat_create(cdev, info->num_subdev,
+					      "sa1100");
+		if (info->mtd == NULL)
+			ret = -ENXIO;
+#else
+		printk(KERN_ERR "SA1100 flash: multiple devices "
+		       "found but MTD concat support disabled.\n");
+		ret = -ENXIO;
+#endif
+	}
+
+	if (ret == 0)
+		return info;
+
+ err:
+	sa1100_destroy(info);
+ out:
+	return ERR_PTR(ret);
+}
+
+static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static int __init sa1100_mtd_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct flash_platform_data *flash = pdev->dev.platform_data;
+	struct mtd_partition *parts;
+	const char *part_type = NULL;
+	struct sa_info *info;
+	int err, nr_parts = 0;
+
+	if (!flash)
+		return -ENODEV;
+
+	info = sa1100_setup_mtd(pdev, flash);
+	if (IS_ERR(info)) {
+		err = PTR_ERR(info);
+		goto out;
+	}
+
+	/*
+	 * Partition selection stuff.
+	 */
+#ifdef CONFIG_MTD_PARTITIONS
+	nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
+	if (nr_parts > 0) {
+		info->parts = parts;
+		part_type = "dynamic";
+	} else
+#endif
+	{
+		parts = flash->parts;
+		nr_parts = flash->nr_parts;
+		part_type = "static";
+	}
+
+	if (nr_parts == 0) {
+		printk(KERN_NOTICE "SA1100 flash: no partition info "
+			"available, registering whole flash\n");
+		add_mtd_device(info->mtd);
+	} else {
+		printk(KERN_NOTICE "SA1100 flash: using %s partition "
+			"definition\n", part_type);
+		add_mtd_partitions(info->mtd, parts, nr_parts);
+	}
+
+	dev_set_drvdata(dev, info);
+	err = 0;
+
+ out:
+	return err;
+}
+
+static int __exit sa1100_mtd_remove(struct device *dev)
+{
+	struct sa_info *info = dev_get_drvdata(dev);
+	dev_set_drvdata(dev, NULL);
+	sa1100_destroy(info);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sa1100_mtd_suspend(struct device *dev, u32 state, u32 level)
+{
+	struct sa_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (info && level == SUSPEND_SAVE_STATE)
+		ret = info->mtd->suspend(info->mtd);
+
+	return ret;
+}
+
+static int sa1100_mtd_resume(struct device *dev, u32 level)
+{
+	struct sa_info *info = dev_get_drvdata(dev);
+	if (info && level == RESUME_RESTORE_STATE)
+		info->mtd->resume(info->mtd);
+	return 0;
+}
+#else
+#define sa1100_mtd_suspend NULL
+#define sa1100_mtd_resume  NULL
+#endif
+
+static struct device_driver sa1100_mtd_driver = {
+	.name		= "flash",
+	.bus		= &platform_bus_type,
+	.probe		= sa1100_mtd_probe,
+	.remove		= __exit_p(sa1100_mtd_remove),
+	.suspend	= sa1100_mtd_suspend,
+	.resume		= sa1100_mtd_resume,
+};
+
+static int __init sa1100_mtd_init(void)
+{
+	return driver_register(&sa1100_mtd_driver);
+}
+
+static void __exit sa1100_mtd_exit(void)
+{
+	driver_unregister(&sa1100_mtd_driver);
+}
+
+module_init(sa1100_mtd_init);
+module_exit(sa1100_mtd_exit);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("SA1100 CFI map driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
new file mode 100644
index 000000000000..da684d3384e9
--- /dev/null
+++ b/drivers/mtd/maps/sbc8240.c
@@ -0,0 +1,247 @@
+/*
+ * Handle mapping of the flash memory access routines on the SBC8240 board.
+ *
+ * Carolyn Smith, Tektronix, Inc.
+ *
+ * This code is GPLed
+ *
+ * $Id: sbc8240.c,v 1.4 2004/07/12 22:38:29 dwmw2 Exp $
+ *
+ */
+
+/*
+ * The SBC8240 has 2 flash banks.
+ * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors.
+ * It contains the U-Boot code (7 sectors) and the environment (1 sector).
+ * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB sector,
+ * 2 x 8 KiB sectors, 1 x 16 KiB sectors.
+ * Both parts are JEDEC compatible.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
+#define	DEBUG
+
+#ifdef	DEBUG
+# define debugk(fmt,args...)	printk(fmt ,##args)
+#else
+# define debugk(fmt,args...)
+#endif
+
+
+#define WINDOW_ADDR0	0xFFF00000		/* 512 KiB */
+#define WINDOW_SIZE0	0x00080000
+#define BUSWIDTH0	1
+
+#define WINDOW_ADDR1	0xFF000000		/* 4 MiB */
+#define WINDOW_SIZE1	0x00400000
+#define BUSWIDTH1	8
+
+#define MSG_PREFIX "sbc8240:"	/* prefix for our printk()'s */
+#define MTDID	   "sbc8240-%d"	/* for mtdparts= partitioning */
+
+
+static struct map_info sbc8240_map[2] = {
+	{
+		.name           = "sbc8240 Flash Bank #0",
+		.size           = WINDOW_SIZE0,
+		.bankwidth       = BUSWIDTH0,
+	},
+	{
+		.name           = "sbc8240 Flash Bank #1",
+		.size           = WINDOW_SIZE1,
+		.bankwidth       = BUSWIDTH1,
+	}
+};
+
+#define NUM_FLASH_BANKS	(sizeof(sbc8240_map) / sizeof(struct map_info))
+
+/*
+ * The following defines the partition layout of SBC8240 boards.
+ *
+ * See include/linux/mtd/partitions.h for definition of the
+ * mtd_partition structure.
+ *
+ * The *_max_flash_size is the maximum possible mapped flash size
+ * which is not necessarily the actual flash size. It must correspond
+ * to the value specified in the mapping definition defined by the
+ * "struct map_desc *_io_desc" for the corresponding machine.
+ */
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+static struct mtd_partition sbc8240_uboot_partitions [] = {
+	/* Bank 0 */
+	{
+		.name =	"U-boot",			/* U-Boot Firmware	*/
+		.offset =	0,
+		.size =	0x00070000,			/*  7 x 64 KiB sectors 	*/
+		.mask_flags = MTD_WRITEABLE,		/*  force read-only	*/
+	},
+	{
+		.name =	"environment",			/* U-Boot environment	*/
+		.offset =	0x00070000,
+		.size =	0x00010000,			/*  1 x 64 KiB sector	*/
+	},
+};
+
+static struct mtd_partition sbc8240_fs_partitions [] = {
+	{
+		.name =	"jffs",				/* JFFS  filesystem	*/
+		.offset =	0,
+		.size =	0x003C0000,			/*  4 * 15 * 64KiB	*/
+	},
+	{
+		.name =	"tmp32",
+		.offset =	0x003C0000,
+		.size =	0x00020000,			/*  4 * 32KiB		*/
+	},
+	{
+		.name =	"tmp8a",
+		.offset =	0x003E0000,
+		.size =	0x00008000,			/*  4 * 8KiB		*/
+	},
+	{
+		.name =	"tmp8b",
+		.offset =	0x003E8000,
+		.size =	0x00008000,			/*  4 * 8KiB		*/
+	},
+	{
+		.name =	"tmp16",
+		.offset =	0x003F0000,
+		.size =	0x00010000,			/*  4 * 16KiB		*/
+	}
+};
+
+#define NB_OF(x) (sizeof (x) / sizeof (x[0]))
+
+/* trivial struct to describe partition information */
+struct mtd_part_def
+{
+	int nums;
+	unsigned char *type;
+	struct mtd_partition* mtd_part;
+};
+
+static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS];
+static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS];
+
+
+#endif	/* CONFIG_MTD_PARTITIONS */
+
+
+int __init init_sbc8240_mtd (void)
+{
+	static struct _cjs {
+		u_long addr;
+		u_long size;
+	} pt[NUM_FLASH_BANKS] = {
+		{
+			.addr = WINDOW_ADDR0,
+			.size = WINDOW_SIZE0
+		},
+		{
+			.addr = WINDOW_ADDR1,
+			.size = WINDOW_SIZE1
+		},
+	};
+
+	int devicesfound = 0;
+	int i;
+
+	for (i = 0; i < NUM_FLASH_BANKS; i++) {
+		printk (KERN_NOTICE MSG_PREFIX
+			"Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr);
+
+		sbc8240_map[i].map_priv_1 =
+			(unsigned long) ioremap (pt[i].addr, pt[i].size);
+		if (!sbc8240_map[i].map_priv_1) {
+			printk (MSG_PREFIX "failed to ioremap\n");
+			return -EIO;
+		}
+		simple_map_init(&sbc8240_mtd[i]);
+
+		sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]);
+
+		if (sbc8240_mtd[i]) {
+			sbc8240_mtd[i]->module = THIS_MODULE;
+			devicesfound++;
+		}
+	}
+
+	if (!devicesfound) {
+		printk(KERN_NOTICE MSG_PREFIX
+		       "No suppported flash chips found!\n");
+		return -ENXIO;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	sbc8240_part_banks[0].mtd_part   = sbc8240_uboot_partitions;
+	sbc8240_part_banks[0].type       = "static image";
+	sbc8240_part_banks[0].nums       = NB_OF(sbc8240_uboot_partitions);
+	sbc8240_part_banks[1].mtd_part   = sbc8240_fs_partitions;
+	sbc8240_part_banks[1].type       = "static file system";
+	sbc8240_part_banks[1].nums       = NB_OF(sbc8240_fs_partitions);
+
+	for (i = 0; i < NUM_FLASH_BANKS; i++) {
+
+		if (!sbc8240_mtd[i]) continue;
+		if (sbc8240_part_banks[i].nums == 0) {
+			printk (KERN_NOTICE MSG_PREFIX
+				"No partition info available, registering whole device\n");
+			add_mtd_device(sbc8240_mtd[i]);
+		} else {
+			printk (KERN_NOTICE MSG_PREFIX
+				"Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name);
+			add_mtd_partitions (sbc8240_mtd[i], 
+					    sbc8240_part_banks[i].mtd_part,
+					    sbc8240_part_banks[i].nums);
+		}
+	}
+#else
+	printk(KERN_NOTICE MSG_PREFIX
+	       "Registering %d flash banks at once\n", devicesfound);
+
+	for (i = 0; i < devicesfound; i++) {
+		add_mtd_device(sbc8240_mtd[i]);
+	}
+#endif	/* CONFIG_MTD_PARTITIONS */
+
+	return devicesfound == 0 ? -ENXIO : 0;
+}
+
+static void __exit cleanup_sbc8240_mtd (void)
+{
+	int i;
+
+	for (i = 0; i < NUM_FLASH_BANKS; i++) {
+		if (sbc8240_mtd[i]) {
+			del_mtd_device (sbc8240_mtd[i]);
+			map_destroy (sbc8240_mtd[i]);
+		}
+		if (sbc8240_map[i].map_priv_1) {
+			iounmap ((void *) sbc8240_map[i].map_priv_1);
+			sbc8240_map[i].map_priv_1 = 0;
+		}
+	}
+}
+
+module_init (init_sbc8240_mtd);
+module_exit (cleanup_sbc8240_mtd);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>");
+MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards");
+
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
new file mode 100644
index 000000000000..65add28bde14
--- /dev/null
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -0,0 +1,239 @@
+/* sbc_gxx.c -- MTD map driver for Arcom Control Systems SBC-MediaGX,
+                SBC-GXm and SBC-GX1 series boards.
+ 
+   Copyright (C) 2001 Arcom Control System Ltd
+ 
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+ 
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+ 
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+   $Id: sbc_gxx.c,v 1.33 2004/11/28 09:40:40 dwmw2 Exp $
+
+The SBC-MediaGX / SBC-GXx has up to 16 MiB of 
+Intel StrataFlash (28F320/28F640) in x8 mode.  
+
+This driver uses the CFI probe and Intel Extended Command Set drivers.
+
+The flash is accessed as follows:
+
+   16 KiB memory window at 0xdc000-0xdffff
+   
+   Two IO address locations for paging
+   
+   0x258
+       bit 0-7: address bit 14-21
+   0x259
+       bit 0-1: address bit 22-23
+       bit 7:   0 - reset/powered down
+                1 - device enabled
+
+The single flash device is divided into 3 partition which appear as 
+separate MTD devices.
+
+25/04/2001 AJL (Arcom)  Modified signon strings and partition sizes
+                        (to support bzImages up to 638KiB-ish)
+*/
+
+// Includes
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+// Defines
+
+// - Hardware specific
+
+#define WINDOW_START 0xdc000
+
+/* Number of bits in offset. */
+#define WINDOW_SHIFT 14
+#define WINDOW_LENGTH (1 << WINDOW_SHIFT)
+
+/* The bits for the offset into the window. */
+#define WINDOW_MASK (WINDOW_LENGTH-1)
+#define PAGE_IO 0x258
+#define PAGE_IO_SIZE 2
+
+/* bit 7 of 0x259 must be 1 to enable device. */
+#define DEVICE_ENABLE 0x8000
+
+// - Flash / Partition sizing
+
+#define MAX_SIZE_KiB             16384
+#define BOOT_PARTITION_SIZE_KiB  768
+#define DATA_PARTITION_SIZE_KiB  1280
+#define APP_PARTITION_SIZE_KiB   6144
+
+// Globals
+
+static volatile int page_in_window = -1; // Current page in window.
+static void __iomem *iomapadr;
+static DEFINE_SPINLOCK(sbc_gxx_spin);
+
+/* partition_info gives details on the logical partitions that the split the 
+ * single flash device into. If the size if zero we use up to the end of the
+ * device. */
+static struct mtd_partition partition_info[]={
+    { .name = "SBC-GXx flash boot partition", 
+      .offset = 0, 
+      .size =   BOOT_PARTITION_SIZE_KiB*1024 },
+    { .name = "SBC-GXx flash data partition", 
+      .offset = BOOT_PARTITION_SIZE_KiB*1024, 
+      .size = (DATA_PARTITION_SIZE_KiB)*1024 },
+    { .name = "SBC-GXx flash application partition", 
+      .offset = (BOOT_PARTITION_SIZE_KiB+DATA_PARTITION_SIZE_KiB)*1024 }
+};
+
+#define NUM_PARTITIONS 3
+
+static inline void sbc_gxx_page(struct map_info *map, unsigned long ofs)
+{
+	unsigned long page = ofs >> WINDOW_SHIFT;
+
+	if( page!=page_in_window ) {
+		outw( page | DEVICE_ENABLE, PAGE_IO );
+		page_in_window = page;
+	}
+}
+
+
+static map_word sbc_gxx_read8(struct map_info *map, unsigned long ofs)
+{
+	map_word ret;
+	spin_lock(&sbc_gxx_spin);
+	sbc_gxx_page(map, ofs);
+	ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
+	spin_unlock(&sbc_gxx_spin);
+	return ret;
+}
+
+static void sbc_gxx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
+		
+		spin_lock(&sbc_gxx_spin);
+		sbc_gxx_page(map, from);
+		memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
+		spin_unlock(&sbc_gxx_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static void sbc_gxx_write8(struct map_info *map, map_word d, unsigned long adr)
+{
+	spin_lock(&sbc_gxx_spin);
+	sbc_gxx_page(map, adr);
+	writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
+	spin_unlock(&sbc_gxx_spin);
+}
+
+static void sbc_gxx_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{	
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
+		
+		spin_lock(&sbc_gxx_spin);
+		sbc_gxx_page(map, to);
+		memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
+		spin_unlock(&sbc_gxx_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static struct map_info sbc_gxx_map = {
+	.name = "SBC-GXx flash",
+	.phys = NO_XIP,
+	.size = MAX_SIZE_KiB*1024, /* this must be set to a maximum possible amount
+			 of flash so the cfi probe routines find all
+			 the chips */
+	.bankwidth = 1,
+	.read = sbc_gxx_read8,
+	.copy_from = sbc_gxx_copy_from,
+	.write = sbc_gxx_write8,
+	.copy_to = sbc_gxx_copy_to
+};
+
+/* MTD device for all of the flash. */
+static struct mtd_info *all_mtd;
+
+static void cleanup_sbc_gxx(void)
+{
+	if( all_mtd ) {
+		del_mtd_partitions( all_mtd );
+		map_destroy( all_mtd );
+	}
+
+	iounmap(iomapadr);
+	release_region(PAGE_IO,PAGE_IO_SIZE);
+}
+
+static int __init init_sbc_gxx(void)
+{
+  	iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
+	if (!iomapadr) {
+		printk( KERN_ERR"%s: failed to ioremap memory region\n",
+			sbc_gxx_map.name );
+		return -EIO;
+	}
+	
+	if (!request_region( PAGE_IO, PAGE_IO_SIZE, "SBC-GXx flash")) {
+		printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n",
+			sbc_gxx_map.name,
+			PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1 );
+		iounmap(iomapadr);
+		return -EAGAIN;
+	}
+		
+	
+	printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
+		sbc_gxx_map.name,
+		PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
+		WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
+
+	/* Probe for chip. */
+	all_mtd = do_map_probe( "cfi_probe", &sbc_gxx_map );
+	if( !all_mtd ) {
+		cleanup_sbc_gxx();
+		return -ENXIO;
+	}
+	
+	all_mtd->owner = THIS_MODULE;
+
+	/* Create MTD devices for each partition. */
+	add_mtd_partitions(all_mtd, partition_info, NUM_PARTITIONS );
+
+	return 0;
+}
+
+module_init(init_sbc_gxx);
+module_exit(cleanup_sbc_gxx);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arcom Control Systems Ltd.");
+MODULE_DESCRIPTION("MTD map driver for SBC-GXm and SBC-GX1 series boards");
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
new file mode 100644
index 000000000000..a06ed21e7ed1
--- /dev/null
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -0,0 +1,304 @@
+/* sc520cdp.c -- MTD map driver for AMD SC520 Customer Development Platform
+ *
+ * Copyright (C) 2001 Sysgo Real-Time Solutions GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * $Id: sc520cdp.c,v 1.21 2004/12/13 10:27:08 dedekind Exp $
+ *
+ *
+ * The SC520CDP is an evaluation board for the Elan SC520 processor available
+ * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
+ * and up to 512 KiB of 8-bit DIL Flash ROM.
+ * For details see http://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/concat.h>
+
+/*
+** The Embedded Systems BIOS decodes the first FLASH starting at
+** 0x8400000. This is a *terrible* place for it because accessing
+** the flash at this location causes the A22 address line to be high
+** (that's what 0x8400000 binary's ought to be). But this is the highest
+** order address line on the raw flash devices themselves!!
+** This causes the top HALF of the flash to be accessed first. Beyond
+** the physical limits of the flash, the flash chip aliases over (to
+** 0x880000 which causes the bottom half to be accessed. This splits the
+** flash into two and inverts it! If you then try to access this from another
+** program that does NOT do this insanity, then you *will* access the
+** first half of the flash, but not find what you expect there. That
+** stuff is in the *second* half! Similarly, the address used by the
+** BIOS for the second FLASH bank is also quite a bad choice.
+** If REPROGRAM_PAR is defined below (the default), then this driver will
+** choose more useful addresses for the FLASH banks by reprogramming the
+** responsible PARxx registers in the SC520's MMCR region. This will
+** cause the settings to be incompatible with the BIOS's settings, which
+** shouldn't be a problem since you are running Linux, (i.e. the BIOS is
+** not much use anyway). However, if you need to be compatible with
+** the BIOS for some reason, just undefine REPROGRAM_PAR.
+*/
+#define REPROGRAM_PAR
+
+
+
+#ifdef REPROGRAM_PAR
+
+/* These are the addresses we want.. */
+#define WINDOW_ADDR_0	0x08800000
+#define WINDOW_ADDR_1	0x09000000
+#define WINDOW_ADDR_2	0x09800000
+
+/* .. and these are the addresses the BIOS gives us */
+#define WINDOW_ADDR_0_BIOS	0x08400000
+#define WINDOW_ADDR_1_BIOS	0x08c00000
+#define WINDOW_ADDR_2_BIOS	0x09400000
+
+#else
+
+#define WINDOW_ADDR_0	0x08400000
+#define WINDOW_ADDR_1	0x08C00000
+#define WINDOW_ADDR_2	0x09400000
+
+#endif
+
+#define WINDOW_SIZE_0	0x00800000
+#define WINDOW_SIZE_1	0x00800000
+#define WINDOW_SIZE_2	0x00080000
+
+
+static struct map_info sc520cdp_map[] = {
+	{
+		.name = "SC520CDP Flash Bank #0",
+		.size = WINDOW_SIZE_0,
+		.bankwidth = 4,
+		.phys = WINDOW_ADDR_0
+	},
+	{
+		.name = "SC520CDP Flash Bank #1",
+		.size = WINDOW_SIZE_1,
+		.bankwidth = 4,
+		.phys = WINDOW_ADDR_1
+	},
+	{
+		.name = "SC520CDP DIL Flash",
+		.size = WINDOW_SIZE_2,
+		.bankwidth = 1,
+		.phys = WINDOW_ADDR_2
+	},
+};
+
+#define NUM_FLASH_BANKS	(sizeof(sc520cdp_map)/sizeof(struct map_info))
+
+static struct mtd_info *mymtd[NUM_FLASH_BANKS];
+static struct mtd_info *merged_mtd;
+
+#ifdef REPROGRAM_PAR
+
+/*
+** The SC520 MMCR (memory mapped control register) region resides
+** at 0xFFFEF000. The 16 Programmable Address Region (PAR) registers
+** are at offset 0x88 in the MMCR:
+*/
+#define SC520_MMCR_BASE		0xFFFEF000
+#define SC520_MMCR_EXTENT	0x1000
+#define SC520_PAR(x)		((0x88/sizeof(unsigned long)) + (x))
+#define NUM_SC520_PAR		16	/* total number of PAR registers */
+
+/*
+** The highest three bits in a PAR register determine what target
+** device is controlled by this PAR. Here, only ROMCS? and BOOTCS
+** devices are of interest.
+*/
+#define SC520_PAR_BOOTCS	(0x4<<29)
+#define SC520_PAR_ROMCS0	(0x5<<29)
+#define SC520_PAR_ROMCS1	(0x6<<29)
+#define SC520_PAR_TRGDEV	(0x7<<29)
+
+/*
+** Bits 28 thru 26 determine some attributes for the
+** region controlled by the PAR. (We only use non-cacheable)
+*/
+#define SC520_PAR_WRPROT	(1<<26)	/* write protected       */
+#define SC520_PAR_NOCACHE	(1<<27)	/* non-cacheable         */
+#define SC520_PAR_NOEXEC	(1<<28)	/* code execution denied */
+
+
+/*
+** Bit 25 determines the granularity: 4K or 64K
+*/
+#define SC520_PAR_PG_SIZ4	(0<<25)
+#define SC520_PAR_PG_SIZ64	(1<<25)
+
+/*
+** Build a value to be written into a PAR register.
+** We only need ROM entries, 64K page size:
+*/
+#define SC520_PAR_ENTRY(trgdev, address, size) \
+	((trgdev) | SC520_PAR_NOCACHE | SC520_PAR_PG_SIZ64 | \
+	(address) >> 16 | (((size) >> 16) - 1) << 14)
+
+struct sc520_par_table
+{
+	unsigned long trgdev;
+	unsigned long new_par;
+	unsigned long default_address;
+};
+
+static struct sc520_par_table par_table[NUM_FLASH_BANKS] =
+{
+	{	/* Flash Bank #0: selected by ROMCS0 */
+		SC520_PAR_ROMCS0,
+		SC520_PAR_ENTRY(SC520_PAR_ROMCS0, WINDOW_ADDR_0, WINDOW_SIZE_0),
+		WINDOW_ADDR_0_BIOS
+	},
+	{	/* Flash Bank #1: selected by ROMCS1 */
+		SC520_PAR_ROMCS1,
+		SC520_PAR_ENTRY(SC520_PAR_ROMCS1, WINDOW_ADDR_1, WINDOW_SIZE_1),
+		WINDOW_ADDR_1_BIOS
+	},
+	{	/* DIL (BIOS) Flash: selected by BOOTCS */
+		SC520_PAR_BOOTCS,
+		SC520_PAR_ENTRY(SC520_PAR_BOOTCS, WINDOW_ADDR_2, WINDOW_SIZE_2),
+		WINDOW_ADDR_2_BIOS
+	}
+};
+
+
+static void sc520cdp_setup_par(void)
+{
+	volatile unsigned long __iomem *mmcr;
+	unsigned long mmcr_val;
+	int i, j;
+
+	/* map in SC520's MMCR area */
+	mmcr = ioremap_nocache(SC520_MMCR_BASE, SC520_MMCR_EXTENT);
+	if(!mmcr) { /* ioremap_nocache failed: skip the PAR reprogramming */
+		/* force physical address fields to BIOS defaults: */
+		for(i = 0; i < NUM_FLASH_BANKS; i++)
+			sc520cdp_map[i].phys = par_table[i].default_address;
+		return;
+	}
+
+	/*
+	** Find the PARxx registers that are reponsible for activating
+	** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a
+	** new value from the table.
+	*/
+	for(i = 0; i < NUM_FLASH_BANKS; i++) {		/* for each par_table entry  */
+		for(j = 0; j < NUM_SC520_PAR; j++) {	/* for each PAR register     */
+			mmcr_val = mmcr[SC520_PAR(j)];
+			/* if target device field matches, reprogram the PAR */
+			if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev)
+			{
+				mmcr[SC520_PAR(j)] = par_table[i].new_par;
+				break;
+			}
+		}
+		if(j == NUM_SC520_PAR)
+		{	/* no matching PAR found: try default BIOS address */
+			printk(KERN_NOTICE "Could not find PAR responsible for %s\n",
+				sc520cdp_map[i].name);
+			printk(KERN_NOTICE "Trying default address 0x%lx\n",
+				par_table[i].default_address);
+			sc520cdp_map[i].phys = par_table[i].default_address;
+		}
+	}
+	iounmap(mmcr);
+}
+#endif
+
+
+static int __init init_sc520cdp(void)
+{
+	int i, devices_found = 0;
+	
+#ifdef REPROGRAM_PAR
+	/* reprogram PAR registers so flash appears at the desired addresses */
+	sc520cdp_setup_par();
+#endif
+
+	for (i = 0; i < NUM_FLASH_BANKS; i++) {
+		printk(KERN_NOTICE "SC520 CDP flash device: 0x%lx at 0x%lx\n",
+		       sc520cdp_map[i].size, sc520cdp_map[i].phys);
+
+		sc520cdp_map[i].virt = ioremap_nocache(sc520cdp_map[i].phys, sc520cdp_map[i].size);
+
+		if (!sc520cdp_map[i].virt) {
+			printk("Failed to ioremap_nocache\n");
+			return -EIO;
+		}
+
+		simple_map_init(&sc520cdp_map[i]);
+
+		mymtd[i] = do_map_probe("cfi_probe", &sc520cdp_map[i]);
+		if(!mymtd[i])
+			mymtd[i] = do_map_probe("jedec_probe", &sc520cdp_map[i]);
+		if(!mymtd[i])
+			mymtd[i] = do_map_probe("map_rom", &sc520cdp_map[i]);
+
+		if (mymtd[i]) {
+			mymtd[i]->owner = THIS_MODULE;
+			++devices_found;
+		}
+		else {
+			iounmap(sc520cdp_map[i].virt);
+		}
+	}
+	if(devices_found >= 2) {
+		/* Combine the two flash banks into a single MTD device & register it: */
+		merged_mtd = mtd_concat_create(mymtd, 2, "SC520CDP Flash Banks #0 and #1");
+		if(merged_mtd)
+			add_mtd_device(merged_mtd);
+	}
+	if(devices_found == 3) /* register the third (DIL-Flash) device */
+		add_mtd_device(mymtd[2]);
+	return(devices_found ? 0 : -ENXIO);
+}
+
+static void __exit cleanup_sc520cdp(void)
+{
+	int i;
+	
+	if (merged_mtd) {
+		del_mtd_device(merged_mtd);
+		mtd_concat_destroy(merged_mtd);
+	}
+	if (mymtd[2])
+		del_mtd_device(mymtd[2]);
+
+	for (i = 0; i < NUM_FLASH_BANKS; i++) {
+		if (mymtd[i])
+			map_destroy(mymtd[i]);
+		if (sc520cdp_map[i].virt) {
+			iounmap(sc520cdp_map[i].virt);
+			sc520cdp_map[i].virt = NULL;
+		}
+	}
+}
+
+module_init(init_sc520cdp);
+module_exit(cleanup_sc520cdp);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
+MODULE_DESCRIPTION("MTD map driver for AMD SC520 Customer Development Platform");
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
new file mode 100644
index 000000000000..5bb3b600e5d0
--- /dev/null
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -0,0 +1,256 @@
+/*
+ * MTD map driver for BIOS Flash on Intel SCB2 boards
+ * $Id: scb2_flash.c,v 1.11 2004/11/28 09:40:40 dwmw2 Exp $
+ * Copyright (C) 2002 Sun Microsystems, Inc.
+ * Tim Hockin <thockin@sun.com>
+ *
+ * A few notes on this MTD map:
+ *
+ * This was developed with a small number of SCB2 boards to test on.
+ * Hopefully, Intel has not introducted too many unaccounted variables in the
+ * making of this board.
+ *
+ * The BIOS marks its own memory region as 'reserved' in the e820 map.  We
+ * try to request it here, but if it fails, we carry on anyway.
+ *
+ * This is how the chip is attached, so said the schematic:
+ * * a 4 MiB (32 Mib) 16 bit chip
+ * * a 1 MiB memory region
+ * * A20 and A21 pulled up
+ * * D8-D15 ignored
+ * What this means is that, while we are addressing bytes linearly, we are
+ * really addressing words, and discarding the other byte.  This means that
+ * the chip MUST BE at least 2 MiB.  This also means that every block is
+ * actually half as big as the chip reports.  It also means that accesses of
+ * logical address 0 hit higher-address sections of the chip, not physical 0.
+ * One can only hope that these 4MiB x16 chips were a lot cheaper than 1MiB x8
+ * chips.
+ *
+ * This driver assumes the chip is not write-protected by an external signal.
+ * As of the this writing, that is true, but may change, just to spite me.
+ *
+ * The actual BIOS layout has been mostly reverse engineered.  Intel BIOS
+ * updates for this board include 10 related (*.bio - &.bi9) binary files and
+ * another separate (*.bbo) binary file.  The 10 files are 64k of data + a
+ * small header.  If the headers are stripped off, the 10 64k files can be
+ * concatenated into a 640k image.  This is your BIOS image, proper.  The
+ * separate .bbo file also has a small header.  It is the 'Boot Block'
+ * recovery BIOS.  Once the header is stripped, no further prep is needed.
+ * As best I can tell, the BIOS is arranged as such:
+ * offset 0x00000 to 0x4ffff (320k):  unknown - SCSI BIOS, etc?
+ * offset 0x50000 to 0xeffff (640k):  BIOS proper
+ * offset 0xf0000 ty 0xfffff (64k):   Boot Block region
+ *
+ * Intel's BIOS update program flashes the BIOS and Boot Block in separate
+ * steps.  Probably a wise thing to do.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#define MODNAME		"scb2_flash"
+#define SCB2_ADDR	0xfff00000
+#define SCB2_WINDOW	0x00100000
+
+
+static void __iomem *scb2_ioaddr;
+static struct mtd_info *scb2_mtd;
+static struct map_info scb2_map = {
+	.name =      "SCB2 BIOS Flash",
+	.size =      0,
+	.bankwidth =  1,
+};
+static int region_fail;
+
+static int __devinit
+scb2_fixup_mtd(struct mtd_info *mtd)
+{
+	int i;
+	int done = 0;
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	/* barf if this doesn't look right */
+	if (cfi->cfiq->InterfaceDesc != 1) {
+		printk(KERN_ERR MODNAME ": unsupported InterfaceDesc: %#x\n",
+		    cfi->cfiq->InterfaceDesc);
+		return -1;
+	}
+
+	/* I wasn't here. I didn't see. dwmw2. */
+
+	/* the chip is sometimes bigger than the map - what a waste */
+	mtd->size = map->size;
+
+	/*
+	 * We only REALLY get half the chip, due to the way it is
+	 * wired up - D8-D15 are tossed away.  We read linear bytes,
+	 * but in reality we are getting 1/2 of each 16-bit read,
+	 * which LOOKS linear to us.  Because CFI code accounts for
+	 * things like lock/unlock/erase by eraseregions, we need to
+	 * fudge them to reflect this.  Erases go like this:
+	 *   * send an erase to an address
+	 *   * the chip samples the address and erases the block
+	 *   * add the block erasesize to the address and repeat
+	 *   -- the problem is that addresses are 16-bit addressable
+	 *   -- we end up erasing every-other block
+	 */
+	mtd->erasesize /= 2;
+	for (i = 0; i < mtd->numeraseregions; i++) {
+		struct mtd_erase_region_info *region = &mtd->eraseregions[i];
+		region->erasesize /= 2;
+	}
+
+	/*
+	 * If the chip is bigger than the map, it is wired with the high
+	 * address lines pulled up.  This makes us access the top portion of
+	 * the chip, so all our erase-region info is wrong.  Start cutting from
+	 * the bottom.
+	 */
+	for (i = 0; !done && i < mtd->numeraseregions; i++) {
+		struct mtd_erase_region_info *region = &mtd->eraseregions[i];
+
+		if (region->numblocks * region->erasesize > mtd->size) {
+			region->numblocks = (mtd->size / region->erasesize);
+			done = 1;
+		} else {
+			region->numblocks = 0;
+		}
+		region->offset = 0;
+	}
+
+	return 0;
+}
+
+/* CSB5's 'Function Control Register' has bits for decoding @ >= 0xffc00000 */
+#define CSB5_FCR	0x41
+#define CSB5_FCR_DECODE_ALL 0x0e
+static int __devinit
+scb2_flash_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+	u8 reg;
+
+	/* enable decoding of the flash region in the south bridge */
+	pci_read_config_byte(dev, CSB5_FCR, &reg);
+	pci_write_config_byte(dev, CSB5_FCR, reg | CSB5_FCR_DECODE_ALL);
+
+	if (!request_mem_region(SCB2_ADDR, SCB2_WINDOW, scb2_map.name)) {
+		/*
+		 * The BIOS seems to mark the flash region as 'reserved'
+		 * in the e820 map.  Warn and go about our business.
+		 */
+		printk(KERN_WARNING MODNAME
+		    ": warning - can't reserve rom window, continuing\n");
+		region_fail = 1;
+	}
+
+	/* remap the IO window (w/o caching) */
+	scb2_ioaddr = ioremap_nocache(SCB2_ADDR, SCB2_WINDOW);
+	if (!scb2_ioaddr) {
+		printk(KERN_ERR MODNAME ": Failed to ioremap window!\n");
+		if (!region_fail)
+			release_mem_region(SCB2_ADDR, SCB2_WINDOW);
+		return -ENOMEM;
+	}
+
+	scb2_map.phys = SCB2_ADDR;
+	scb2_map.virt = scb2_ioaddr;
+	scb2_map.size = SCB2_WINDOW;
+
+	simple_map_init(&scb2_map);
+
+	/* try to find a chip */
+	scb2_mtd = do_map_probe("cfi_probe", &scb2_map);
+
+	if (!scb2_mtd) {
+		printk(KERN_ERR MODNAME ": flash probe failed!\n");
+		iounmap(scb2_ioaddr);
+		if (!region_fail)
+			release_mem_region(SCB2_ADDR, SCB2_WINDOW);
+		return -ENODEV;
+	}
+
+	scb2_mtd->owner = THIS_MODULE;
+	if (scb2_fixup_mtd(scb2_mtd) < 0) {
+		del_mtd_device(scb2_mtd);
+		map_destroy(scb2_mtd);
+		iounmap(scb2_ioaddr);
+		if (!region_fail)
+			release_mem_region(SCB2_ADDR, SCB2_WINDOW);
+		return -ENODEV;
+	}
+
+	printk(KERN_NOTICE MODNAME ": chip size 0x%x at offset 0x%x\n",
+	       scb2_mtd->size, SCB2_WINDOW - scb2_mtd->size);
+
+	add_mtd_device(scb2_mtd);
+
+	return 0;
+}
+
+static void __devexit
+scb2_flash_remove(struct pci_dev *dev)
+{
+	if (!scb2_mtd)
+		return;
+
+	/* disable flash writes */
+	if (scb2_mtd->lock)
+		scb2_mtd->lock(scb2_mtd, 0, scb2_mtd->size);
+
+	del_mtd_device(scb2_mtd);
+	map_destroy(scb2_mtd);
+
+	iounmap(scb2_ioaddr);
+	scb2_ioaddr = NULL;
+
+	if (!region_fail)
+		release_mem_region(SCB2_ADDR, SCB2_WINDOW);
+	pci_set_drvdata(dev, NULL);
+}
+
+static struct pci_device_id scb2_flash_pci_ids[] = {
+	{
+	  .vendor = PCI_VENDOR_ID_SERVERWORKS,
+	  .device = PCI_DEVICE_ID_SERVERWORKS_CSB5,
+	  .subvendor = PCI_ANY_ID,
+	  .subdevice = PCI_ANY_ID
+	},
+	{ 0, }
+};
+
+static struct pci_driver scb2_flash_driver = {
+	.name =     "Intel SCB2 BIOS Flash",
+	.id_table = scb2_flash_pci_ids,
+	.probe =    scb2_flash_probe,
+	.remove =   __devexit_p(scb2_flash_remove),
+};
+
+static int __init
+scb2_flash_init(void)
+{
+	return pci_module_init(&scb2_flash_driver);
+}
+
+static void __exit
+scb2_flash_exit(void)
+{
+	pci_unregister_driver(&scb2_flash_driver);
+}
+
+module_init(scb2_flash_init);
+module_exit(scb2_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tim Hockin <thockin@sun.com>");
+MODULE_DESCRIPTION("MTD map driver for Intel SCB2 BIOS Flash");
+MODULE_DEVICE_TABLE(pci, scb2_flash_pci_ids);
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
new file mode 100644
index 000000000000..0ece3786d6ea
--- /dev/null
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -0,0 +1,233 @@
+/* linux/drivers/mtd/maps/scx200_docflash.c 
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   $Id: scx200_docflash.c,v 1.10 2004/11/28 09:40:40 dwmw2 Exp $ 
+
+   National Semiconductor SCx200 flash mapped with DOCCS
+*/
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/pci.h>
+#include <linux/scx200.h>
+
+#define NAME "scx200_docflash"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>");
+MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver");
+MODULE_LICENSE("GPL");
+
+static int probe = 0;		/* Don't autoprobe */
+static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */
+static unsigned width = 8;	/* Default to 8 bits wide */
+static char *flashtype = "cfi_probe";
+
+module_param(probe, int, 0);
+MODULE_PARM_DESC(probe, "Probe for a BIOS mapping");
+module_param(size, int, 0);
+MODULE_PARM_DESC(size, "Size of the flash mapping");
+module_param(width, int, 0);
+MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)");
+module_param(flashtype, charp, 0);
+MODULE_PARM_DESC(flashtype, "Type of MTD probe to do");
+
+static struct resource docmem = {
+	.flags = IORESOURCE_MEM,
+	.name  = "NatSemi SCx200 DOCCS Flash",
+};
+
+static struct mtd_info *mymtd;
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition partition_info[] = {
+	{ 
+		.name   = "DOCCS Boot kernel", 
+		.offset = 0, 
+		.size   = 0xc0000
+	},
+	{ 
+		.name   = "DOCCS Low BIOS", 
+		.offset = 0xc0000, 
+		.size   = 0x40000
+	},
+	{ 
+		.name   = "DOCCS File system", 
+		.offset = 0x100000, 
+		.size   = ~0	/* calculate from flash size */
+	},
+	{ 
+		.name   = "DOCCS High BIOS", 
+		.offset = ~0, 	/* calculate from flash size */
+		.size   = 0x80000
+	},
+};
+#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#endif
+
+
+static struct map_info scx200_docflash_map = {
+	.name      = "NatSemi SCx200 DOCCS Flash",
+};
+
+static int __init init_scx200_docflash(void)
+{
+	unsigned u;
+	unsigned base;
+	unsigned ctrl;
+	unsigned pmr;
+	struct pci_dev *bridge;
+
+	printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
+
+	if ((bridge = pci_find_device(PCI_VENDOR_ID_NS, 
+				      PCI_DEVICE_ID_NS_SCx200_BRIDGE,
+				      NULL)) == NULL)
+		return -ENODEV;
+
+	/* check that we have found the configuration block */
+	if (!scx200_cb_present())
+		return -ENODEV;
+
+	if (probe) {
+		/* Try to use the present flash mapping if any */
+		pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base);
+		pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl);
+		pmr = inl(scx200_cb_base + SCx200_PMR);
+
+		if (base == 0
+		    || (ctrl & 0x07000000) != 0x07000000
+		    || (ctrl & 0x0007ffff) == 0)
+			return -ENODEV;
+
+		size = ((ctrl&0x1fff)<<13) + (1<<13);
+
+		for (u = size; u > 1; u >>= 1)
+			;
+		if (u != 1)
+			return -ENODEV;
+
+		if (pmr & (1<<6))
+			width = 16;
+		else
+			width = 8;
+
+		docmem.start = base;
+		docmem.end = base + size;
+
+		if (request_resource(&iomem_resource, &docmem)) {
+			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
+			return -ENOMEM;
+		}
+	} else {
+		for (u = size; u > 1; u >>= 1)
+			;
+		if (u != 1) {
+			printk(KERN_ERR NAME ": invalid size for flash mapping\n");
+			return -EINVAL;
+		}
+		
+		if (width != 8 && width != 16) {
+			printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
+			return -EINVAL;
+		}
+		
+		if (allocate_resource(&iomem_resource, &docmem, 
+				      size,
+				      0xc0000000, 0xffffffff, 
+				      size, NULL, NULL)) {
+			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
+			return -ENOMEM;
+		}
+		
+		ctrl = 0x07000000 | ((size-1) >> 13);
+
+		printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
+		
+		pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start);
+		pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl);
+		pmr = inl(scx200_cb_base + SCx200_PMR);
+		
+		if (width == 8) {
+			pmr &= ~(1<<6);
+		} else {
+			pmr |= (1<<6);
+		}
+		outl(pmr, scx200_cb_base + SCx200_PMR);
+	}
+	
+       	printk(KERN_INFO NAME ": DOCCS mapped at 0x%lx-0x%lx, width %d\n", 
+	       docmem.start, docmem.end, width);
+
+	scx200_docflash_map.size = size;
+	if (width == 8)
+		scx200_docflash_map.bankwidth = 1;
+	else
+		scx200_docflash_map.bankwidth = 2;
+
+	simple_map_init(&scx200_docflash_map);
+
+	scx200_docflash_map.phys = docmem.start;
+	scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size);
+	if (!scx200_docflash_map.virt) {
+		printk(KERN_ERR NAME ": failed to ioremap the flash\n");
+		release_resource(&docmem);
+		return -EIO;
+	}
+
+	mymtd = do_map_probe(flashtype, &scx200_docflash_map);
+	if (!mymtd) {
+		printk(KERN_ERR NAME ": unable to detect flash\n");
+		iounmap(scx200_docflash_map.virt);
+		release_resource(&docmem);
+		return -ENXIO;
+	}
+
+	if (size < mymtd->size)
+		printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n");
+
+	mymtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	partition_info[3].offset = mymtd->size-partition_info[3].size;
+	partition_info[2].size = partition_info[3].offset-partition_info[2].offset;
+	add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
+#else
+	add_mtd_device(mymtd);
+#endif
+	return 0;
+}
+
+static void __exit cleanup_scx200_docflash(void)
+{
+	if (mymtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+		del_mtd_partitions(mymtd);
+#else
+		del_mtd_device(mymtd);
+#endif
+		map_destroy(mymtd);
+	}
+	if (scx200_docflash_map.virt) {
+		iounmap(scx200_docflash_map.virt);
+		release_resource(&docmem);
+	}
+}
+
+module_init(init_scx200_docflash);
+module_exit(cleanup_scx200_docflash);
+
+/*
+    Local variables:
+        compile-command: "make -k -C ../../.. SUBDIRS=drivers/mtd/maps modules"
+        c-basic-offset: 8
+    End:
+*/
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
new file mode 100644
index 000000000000..b3b39cb7c608
--- /dev/null
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -0,0 +1,101 @@
+/*
+ * sharpsl-flash.c
+ * 
+ * Copyright (C) 2001 Lineo Japan, Inc.
+ * Copyright (C) 2002  SHARP
+ *
+ * $Id: sharpsl-flash.c,v 1.2 2004/11/24 20:38:06 rpurdie Exp $
+ *
+ * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
+ *          Handle mapping of the flash on the RPX Lite and CLLF boards
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#define WINDOW_ADDR 0x00000000
+#define WINDOW_SIZE 0x01000000
+#define BANK_WIDTH 2
+
+static struct mtd_info *mymtd;
+
+struct map_info sharpsl_map = {
+	.name = "sharpsl-flash",
+	.size = WINDOW_SIZE,
+	.bankwidth = BANK_WIDTH,
+	.phys = WINDOW_ADDR
+};
+
+static struct mtd_partition sharpsl_partitions[1] = {
+	{
+		name:		"Filesystem",
+		size:		0x006d0000,
+		offset:		0x00120000
+	}
+};
+
+#define NB_OF(x)  (sizeof(x)/sizeof(x[0]))
+
+int __init init_sharpsl(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+	char *part_type = "static";
+
+	printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n", WINDOW_SIZE, WINDOW_ADDR);
+	sharpsl_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
+	if (!sharpsl_map.virt) {
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	mymtd = do_map_probe("map_rom", &sharpsl_map);
+	if (!mymtd) {
+		iounmap(sharpsl_map.virt);
+		return -ENXIO;
+	}
+
+	mymtd->owner = THIS_MODULE;
+
+	parts = sharpsl_partitions;
+	nb_parts = NB_OF(sharpsl_partitions);
+
+	printk(KERN_NOTICE "Using %s partision definition\n", part_type);
+	add_mtd_partitions(mymtd, parts, nb_parts);
+
+	return 0;
+}
+
+static void __exit cleanup_sharpsl(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+	}
+	if (sharpsl_map.virt) {
+		iounmap(sharpsl_map.virt);
+		sharpsl_map.virt = 0;
+	}
+}
+
+module_init(init_sharpsl);
+module_exit(cleanup_sharpsl);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("SHARP (Original: Arnold Christensen <AKC@pel.dk>)");
+MODULE_DESCRIPTION("MTD map driver for SHARP SL series");
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
new file mode 100644
index 000000000000..8ce5d897645c
--- /dev/null
+++ b/drivers/mtd/maps/solutionengine.c
@@ -0,0 +1,137 @@
+/*
+ * $Id: solutionengine.c,v 1.14 2004/09/16 23:27:14 gleixner Exp $
+ *
+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
+ *
+ * (C) 2001 Red Hat, Inc.
+ *
+ * GPL'd
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+
+static struct mtd_info *flash_mtd;
+static struct mtd_info *eprom_mtd;
+
+static struct mtd_partition *parsed_parts;
+
+struct map_info soleng_eprom_map = {
+	.name = "Solution Engine EPROM",
+	.size = 0x400000,
+	.bankwidth = 4,
+};
+
+struct map_info soleng_flash_map = {
+	.name = "Solution Engine FLASH",
+	.size = 0x400000,
+	.bankwidth = 4,
+};
+
+static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+
+#ifdef CONFIG_MTD_SUPERH_RESERVE
+static struct mtd_partition superh_se_partitions[] = {
+	/* Reserved for boot code, read-only */
+	{
+		.name = "flash_boot",
+		.offset = 0x00000000,
+		.size = CONFIG_MTD_SUPERH_RESERVE,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	/* All else is writable (e.g. JFFS) */
+	{
+		.name = "Flash FS",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	}
+};
+#endif /* CONFIG_MTD_SUPERH_RESERVE */
+
+static int __init init_soleng_maps(void)
+{
+	int nr_parts = 0;
+
+	/* First probe at offset 0 */
+	soleng_flash_map.phys = 0;
+	soleng_flash_map.virt = (void __iomem *)P2SEGADDR(0);
+	soleng_eprom_map.phys = 0x01000000;
+	soleng_eprom_map.virt = (void __iomem *)P1SEGADDR(0x01000000);
+	simple_map_init(&soleng_eprom_map);
+	simple_map_init(&soleng_flash_map);
+	
+	printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
+	flash_mtd = do_map_probe("cfi_probe", &soleng_flash_map);
+	if (!flash_mtd) {
+		/* Not there. Try swapping */
+		printk(KERN_NOTICE "Probing for flash chips at 0x01000000:\n");
+		soleng_flash_map.phys = 0x01000000;
+		soleng_flash_map.virt = P2SEGADDR(0x01000000);
+		soleng_eprom_map.phys = 0;
+		soleng_eprom_map.virt = P1SEGADDR(0);
+		flash_mtd = do_map_probe("cfi_probe", &soleng_flash_map);
+		if (!flash_mtd) {
+			/* Eep. */
+			printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
+			return -ENXIO;
+		}
+	}
+	printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
+	       soleng_flash_map.phys & 0x1fffffff,
+	       soleng_eprom_map.phys & 0x1fffffff);
+	flash_mtd->owner = THIS_MODULE;
+
+	eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map);
+	if (eprom_mtd) {
+		eprom_mtd->owner = THIS_MODULE;
+		add_mtd_device(eprom_mtd);
+	}
+
+	nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
+
+#ifdef CONFIG_MTD_SUPERH_RESERVE
+	if (nr_parts <= 0) {
+		printk(KERN_NOTICE "Using configured partition at 0x%08x.\n",
+		       CONFIG_MTD_SUPERH_RESERVE);
+		parsed_parts = superh_se_partitions;
+		nr_parts = sizeof(superh_se_partitions)/sizeof(*parsed_parts);
+	}
+#endif /* CONFIG_MTD_SUPERH_RESERVE */
+
+	if (nr_parts > 0)
+		add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
+	else
+		add_mtd_device(flash_mtd);
+
+	return 0;
+}
+
+static void __exit cleanup_soleng_maps(void)
+{
+	if (eprom_mtd) {
+		del_mtd_device(eprom_mtd);
+		map_destroy(eprom_mtd);
+	}
+
+	if (parsed_parts)
+		del_mtd_partitions(flash_mtd);
+	else
+		del_mtd_device(flash_mtd);
+	map_destroy(flash_mtd);
+}
+
+module_init(init_soleng_maps);
+module_exit(cleanup_soleng_maps);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("MTD map driver for Hitachi SolutionEngine (and similar) boards");
+
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
new file mode 100644
index 000000000000..29091d10030a
--- /dev/null
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -0,0 +1,177 @@
+/* $Id: sun_uflash.c,v 1.11 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * sun_uflash - Driver implementation for user-programmable flash
+ * present on many Sun Microsystems SME boardsets.
+ *
+ * This driver does NOT provide access to the OBP-flash for
+ * safety reasons-- use <linux>/drivers/sbus/char/flash.c instead.
+ *
+ * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/ebus.h>
+#include <asm/oplib.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+#define UFLASH_OBPNAME	"flashprom"
+#define UFLASH_DEVNAME 	"userflash"
+
+#define UFLASH_WINDOW_SIZE	0x200000
+#define UFLASH_BUSWIDTH		1			/* EBus is 8-bit */
+
+MODULE_AUTHOR
+	("Eric Brower <ebrower@usa.net>");
+MODULE_DESCRIPTION
+	("User-programmable flash device on Sun Microsystems boardsets");
+MODULE_SUPPORTED_DEVICE
+	("userflash");
+MODULE_LICENSE
+	("GPL");
+
+static LIST_HEAD(device_list);
+struct uflash_dev {
+	char *			name;	/* device name */
+	struct map_info 	map;	/* mtd map info */
+	struct mtd_info *	mtd;	/* mtd info */
+	struct list_head	list;
+};
+
+
+struct map_info uflash_map_templ = {
+		.name =		"SUNW,???-????",
+		.size =		UFLASH_WINDOW_SIZE,
+		.bankwidth =	UFLASH_BUSWIDTH,
+};
+
+int uflash_devinit(struct linux_ebus_device* edev)
+{
+	int iTmp, nregs;
+	struct linux_prom_registers regs[2];
+	struct uflash_dev *pdev;
+
+	iTmp = prom_getproperty(
+		edev->prom_node, "reg", (void *)regs, sizeof(regs));
+	if ((iTmp % sizeof(regs[0])) != 0) {
+		printk("%s: Strange reg property size %d\n", 
+			UFLASH_DEVNAME, iTmp);
+		return -ENODEV;
+	}
+
+	nregs = iTmp / sizeof(regs[0]);
+
+	if (nregs != 1) {
+		/* Non-CFI userflash device-- once I find one we
+		 * can work on supporting it.
+		 */
+		printk("%s: unsupported device at 0x%lx (%d regs): " \
+			"email ebrower@usa.net\n", 
+			UFLASH_DEVNAME, edev->resource[0].start, nregs);
+		return -ENODEV;
+	}
+
+	if(0 == (pdev = kmalloc(sizeof(struct uflash_dev), GFP_KERNEL))) {
+		printk("%s: unable to kmalloc new device\n", UFLASH_DEVNAME);
+		return(-ENOMEM);
+	}
+	
+	/* copy defaults and tweak parameters */
+	memcpy(&pdev->map, &uflash_map_templ, sizeof(uflash_map_templ));
+	pdev->map.size = regs[0].reg_size;
+
+	iTmp = prom_getproplen(edev->prom_node, "model");
+	pdev->name = kmalloc(iTmp, GFP_KERNEL);
+	prom_getstring(edev->prom_node, "model", pdev->name, iTmp);
+	if(0 != pdev->name && 0 < strlen(pdev->name)) {
+		pdev->map.name = pdev->name;
+	}
+	pdev->map.phys = edev->resource[0].start;
+	pdev->map.virt = ioremap_nocache(edev->resource[0].start, pdev->map.size);
+	if(0 == pdev->map.virt) {
+		printk("%s: failed to map device\n", __FUNCTION__);
+		kfree(pdev->name);
+		kfree(pdev);
+		return(-1);
+	}
+
+	simple_map_init(&pdev->map);
+
+	/* MTD registration */
+	pdev->mtd = do_map_probe("cfi_probe", &pdev->map);
+	if(0 == pdev->mtd) {
+		iounmap(pdev->map.virt);
+		kfree(pdev->name);
+		kfree(pdev);
+		return(-ENXIO);
+	}
+
+	list_add(&pdev->list, &device_list);
+
+	pdev->mtd->owner = THIS_MODULE;
+
+	add_mtd_device(pdev->mtd);
+	return(0);
+}
+
+static int __init uflash_init(void)
+{
+	struct linux_ebus *ebus = NULL;
+	struct linux_ebus_device *edev = NULL;
+
+	for_each_ebus(ebus) {
+		for_each_ebusdev(edev, ebus) {
+			if (!strcmp(edev->prom_name, UFLASH_OBPNAME)) {
+				if(0 > prom_getproplen(edev->prom_node, "user")) {
+					DEBUG(2, "%s: ignoring device at 0x%lx\n",
+							UFLASH_DEVNAME, edev->resource[0].start);
+				} else {
+					uflash_devinit(edev);
+				}
+			}
+		}
+	}
+
+	if(list_empty(&device_list)) {
+		printk("%s: unable to locate device\n", UFLASH_DEVNAME);
+		return -ENODEV;
+	}
+	return(0);
+}
+
+static void __exit uflash_cleanup(void)
+{
+	struct list_head *udevlist;
+	struct uflash_dev *udev;
+
+	list_for_each(udevlist, &device_list) {
+		udev = list_entry(udevlist, struct uflash_dev, list);
+		DEBUG(2, "%s: removing device %s\n", 
+			UFLASH_DEVNAME, udev->name);
+
+		if(0 != udev->mtd) {
+			del_mtd_device(udev->mtd);
+			map_destroy(udev->mtd);
+		}
+		if(0 != udev->map.virt) {
+			iounmap(udev->map.virt);
+			udev->map.virt = NULL;
+		}
+		if(0 != udev->name) {
+			kfree(udev->name);
+		}
+		kfree(udev);
+	}	
+}
+
+module_init(uflash_init);
+module_exit(uflash_cleanup);
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
new file mode 100644
index 000000000000..995e9991cb8d
--- /dev/null
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -0,0 +1,263 @@
+/*
+ * Handle mapping of the flash memory access routines 
+ * on TQM8xxL based devices.
+ *
+ * $Id: tqm8xxl.c,v 1.13 2004/10/20 22:21:53 dwmw2 Exp $
+ *
+ * based on rpxlite.c
+ *
+ * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
+ *
+ * This code is GPLed
+ * 
+ */
+
+/*
+ * According to TQM8xxL hardware manual, TQM8xxL series have
+ * following flash memory organisations:
+ *	| capacity |	| chip type |	| bank0 |	| bank1 |
+ *	    2MiB	   512Kx16	  2MiB		   0
+ *	    4MiB	   1Mx16	  4MiB		   0
+ *	    8MiB	   1Mx16	  4MiB		   4MiB
+ * Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at 
+ * kernel configuration.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#define FLASH_ADDR 0x40000000
+#define FLASH_SIZE 0x00800000
+#define FLASH_BANK_MAX 4
+
+// trivial struct to describe partition information
+struct mtd_part_def
+{
+	int nums;
+	unsigned char *type;
+	struct mtd_partition* mtd_part;
+};
+
+//static struct mtd_info *mymtd;
+static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
+static struct map_info* map_banks[FLASH_BANK_MAX];
+static struct mtd_part_def part_banks[FLASH_BANK_MAX];
+static unsigned long num_banks;
+static void __iomem *start_scan_addr;
+
+/*
+ * Here are partition information for all known TQM8xxL series devices.
+ * See include/linux/mtd/partitions.h for definition of the mtd_partition
+ * structure.
+ * 
+ * The *_max_flash_size is the maximum possible mapped flash size which
+ * is not necessarily the actual flash size.  It must correspond to the 
+ * value specified in the mapping definition defined by the
+ * "struct map_desc *_io_desc" for the corresponding machine.
+ */
+
+#ifdef CONFIG_MTD_PARTITIONS
+/* Currently, TQM8xxL has upto 8MiB flash */
+static unsigned long tqm8xxl_max_flash_size = 0x00800000;
+
+/* partition definition for first flash bank
+ * (cf. "drivers/char/flash_config.c")
+ */
+static struct mtd_partition tqm8xxl_partitions[] = {
+	{
+	  .name = "ppcboot",
+	  .offset = 0x00000000,
+	  .size = 0x00020000,           /* 128KB           */
+	  .mask_flags = MTD_WRITEABLE,  /* force read-only */
+	},
+	{
+	  .name = "kernel",             /* default kernel image */
+	  .offset = 0x00020000,
+	  .size = 0x000e0000,
+	  .mask_flags = MTD_WRITEABLE,  /* force read-only */
+	},
+	{
+	  .name = "user",
+	  .offset = 0x00100000,
+	  .size = 0x00100000,
+	},
+	{
+	  .name = "initrd",
+	  .offset = 0x00200000,
+	  .size = 0x00200000,
+	}
+};
+/* partition definition for second flash bank */
+static struct mtd_partition tqm8xxl_fs_partitions[] = {
+	{
+	  .name = "cramfs",
+	  .offset = 0x00000000,
+	  .size = 0x00200000,
+	},
+	{
+	  .name = "jffs",
+	  .offset = 0x00200000,
+	  .size = 0x00200000,
+	  //.size = MTDPART_SIZ_FULL,
+	}
+};
+#endif
+
+int __init init_tqm_mtd(void)
+{
+	int idx = 0, ret = 0;
+	unsigned long flash_addr, flash_size, mtd_size = 0;
+	/* pointer to TQM8xxL board info data */
+	bd_t *bd = (bd_t *)__res;
+
+	flash_addr = bd->bi_flashstart;
+	flash_size = bd->bi_flashsize;
+
+	//request maximum flash size address space
+	start_scan_addr = ioremap(flash_addr, flash_size);
+	if (!start_scan_addr) {
+		printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n", __FUNCTION__, flash_addr);
+		return -EIO;
+	}
+
+	for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+		if(mtd_size >= flash_size)
+			break;
+		
+		printk(KERN_INFO "%s: chip probing count %d\n", __FUNCTION__, idx);
+		
+		map_banks[idx] = (struct map_info *)kmalloc(sizeof(struct map_info), GFP_KERNEL);
+		if(map_banks[idx] == NULL) {
+			ret = -ENOMEM;
+			/* FIXME: What if some MTD devices were probed already? */
+			goto error_mem;
+		}
+
+		memset((void *)map_banks[idx], 0, sizeof(struct map_info));
+		map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
+
+		if (!map_banks[idx]->name) {
+			ret = -ENOMEM;
+			/* FIXME: What if some MTD devices were probed already? */
+			goto error_mem;
+		}
+		sprintf(map_banks[idx]->name, "TQM8xxL%d", idx);
+
+		map_banks[idx]->size = flash_size;
+		map_banks[idx]->bankwidth = 4;
+
+		simple_map_init(map_banks[idx]);
+
+		map_banks[idx]->virt = start_scan_addr;
+		map_banks[idx]->phys = flash_addr;
+		/* FIXME: This looks utterly bogus, but I'm trying to
+		   preserve the behaviour of the original (shown here)...
+
+		map_banks[idx]->map_priv_1 =
+		start_scan_addr + ((idx > 0) ?
+		(mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
+		*/
+
+		if (idx && mtd_banks[idx-1]) {
+			map_banks[idx]->virt += mtd_banks[idx-1]->size;
+			map_banks[idx]->phys += mtd_banks[idx-1]->size;
+		}
+
+		//start to probe flash chips
+		mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
+
+		if (mtd_banks[idx]) {
+			mtd_banks[idx]->owner = THIS_MODULE;
+			mtd_size += mtd_banks[idx]->size;
+			num_banks++;
+
+			printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __FUNCTION__, num_banks, 
+			mtd_banks[idx]->name, mtd_banks[idx]->size);
+		}
+	}
+
+	/* no supported flash chips found */
+	if (!num_banks) {
+		printk(KERN_NOTICE "TQM8xxL: No support flash chips found!\n");
+		ret = -ENXIO;
+		goto error_mem;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	/*
+	 * Select Static partition definitions
+	 */
+	part_banks[0].mtd_part = tqm8xxl_partitions;
+	part_banks[0].type = "Static image";
+	part_banks[0].nums = ARRAY_SIZE(tqm8xxl_partitions);
+
+	part_banks[1].mtd_part = tqm8xxl_fs_partitions;
+	part_banks[1].type = "Static file system";
+	part_banks[1].nums = ARRAY_SIZE(tqm8xxl_fs_partitions);
+
+	for(idx = 0; idx < num_banks ; idx++) {
+		if (part_banks[idx].nums == 0) {
+			printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx);
+			add_mtd_device(mtd_banks[idx]);
+		} else {
+			printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n",
+					idx, part_banks[idx].type);
+			add_mtd_partitions(mtd_banks[idx], part_banks[idx].mtd_part, 
+								part_banks[idx].nums);
+		}
+	}
+#else
+	printk(KERN_NOTICE "TQM flash: registering %d whole flash banks at once\n", num_banks);
+	for(idx = 0 ; idx < num_banks ; idx++)
+		add_mtd_device(mtd_banks[idx]);
+#endif
+	return 0;
+error_mem:
+	for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+		if(map_banks[idx] != NULL) {
+			if(map_banks[idx]->name != NULL) {
+				kfree(map_banks[idx]->name);
+				map_banks[idx]->name = NULL;
+			}
+			kfree(map_banks[idx]);
+			map_banks[idx] = NULL;
+		}
+	}
+error:
+	iounmap(start_scan_addr);
+	return ret;
+}
+
+static void __exit cleanup_tqm_mtd(void)
+{
+	unsigned int idx = 0;
+	for(idx = 0 ; idx < num_banks ; idx++) {
+		/* destroy mtd_info previously allocated */
+		if (mtd_banks[idx]) {
+			del_mtd_partitions(mtd_banks[idx]);
+			map_destroy(mtd_banks[idx]);
+		}
+		/* release map_info not used anymore */
+		kfree(map_banks[idx]->name);
+		kfree(map_banks[idx]);
+	}
+
+	if (start_scan_addr) {
+		iounmap(start_scan_addr);
+		start_scan_addr = 0;
+	}
+}
+
+module_init(init_tqm_mtd);
+module_exit(cleanup_tqm_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kirk Lee <kirk@hpc.ee.ntu.edu.tw>");
+MODULE_DESCRIPTION("MTD map driver for TQM8xxL boards");
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
new file mode 100644
index 000000000000..3ebd90f56503
--- /dev/null
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -0,0 +1,141 @@
+/*
+ * ts5500_flash.c -- MTD map driver for Technology Systems TS-5500 board
+ *
+ * Copyright (C) 2004 Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Note:
+ * - In order for detection to work, jumper 3 must be set.
+ * - Drive A and B use a proprietary FTL from General Software which isn't 
+ *   supported as of yet so standard drives can't be mounted; you can create 
+ *   your own (e.g. jffs) file system.
+ * - If you have created your own jffs file system and the bios overwrites 
+ *   it during boot, try disabling Drive A: and B: in the boot order.
+ *
+ * $Id: ts5500_flash.c,v 1.2 2004/11/28 09:40:40 dwmw2 Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
+#define WINDOW_ADDR	0x09400000
+#define WINDOW_SIZE	0x00200000
+
+static struct map_info ts5500_map = {
+	.name = "TS-5500 Flash",
+	.size = WINDOW_SIZE,
+	.bankwidth = 1,
+	.phys = WINDOW_ADDR
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition ts5500_partitions[] = {
+	{
+		.name = "Drive A",
+		.offset = 0,
+		.size = 0x0e0000
+	},
+	{
+		.name = "BIOS",
+		.offset = 0x0e0000,
+		.size = 0x020000,
+	},
+	{
+		.name = "Drive B",
+		.offset = 0x100000,
+		.size = 0x100000
+	}
+};
+
+#define NUM_PARTITIONS (sizeof(ts5500_partitions)/sizeof(struct mtd_partition))
+
+#endif
+
+static struct mtd_info *mymtd;
+
+static int __init init_ts5500_map(void)
+{
+	int rc = 0;
+
+	ts5500_map.virt = ioremap_nocache(ts5500_map.phys, ts5500_map.size);
+
+	if(!ts5500_map.virt) {
+		printk(KERN_ERR "Failed to ioremap_nocache\n");
+		rc = -EIO;
+		goto err_out_ioremap;
+	}
+
+	simple_map_init(&ts5500_map);
+
+	mymtd = do_map_probe("jedec_probe", &ts5500_map);
+	if(!mymtd)
+		mymtd = do_map_probe("map_rom", &ts5500_map);
+
+	if(!mymtd) {
+		rc = -ENXIO;
+		goto err_out_map;
+	}
+
+	mymtd->owner = THIS_MODULE;
+#ifdef CONFIG_MTD_PARTITIONS
+	add_mtd_partitions(mymtd, ts5500_partitions, NUM_PARTITIONS);
+#else	
+	add_mtd_device(mymtd);
+#endif
+
+	return 0;
+
+err_out_map:
+	map_destroy(mymtd);
+err_out_ioremap:
+	iounmap(ts5500_map.virt);
+
+	return rc;
+}
+
+static void __exit cleanup_ts5500_map(void)
+{
+	if (mymtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+		del_mtd_partitions(mymtd);
+#else
+		del_mtd_device(mymtd);
+#endif
+		map_destroy(mymtd);
+	}
+
+	if (ts5500_map.virt) {
+		iounmap(ts5500_map.virt);
+		ts5500_map.virt = NULL;
+	}
+}
+
+module_init(init_ts5500_map);
+module_exit(cleanup_ts5500_map);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("MTD map driver for Techology Systems TS-5500 board");
+
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
new file mode 100644
index 000000000000..170d71239e5e
--- /dev/null
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -0,0 +1,108 @@
+/*
+ * tsunami_flash.c
+ *
+ * flash chip on alpha ds10...
+ * $Id: tsunami_flash.c,v 1.9 2004/07/14 09:52:55 dwmw2 Exp $
+ */
+#include <asm/io.h>
+#include <asm/core_tsunami.h>
+#include <linux/init.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+
+#define FLASH_ENABLE_PORT 0x00C00001
+#define FLASH_ENABLE_BYTE 0x01
+#define FLASH_DISABLE_BYTE 0x00
+
+#define MAX_TIG_FLASH_SIZE (12*1024*1024)
+static inline map_word tsunami_flash_read8(struct map_info *map, unsigned long offset)
+{
+	map_word val;
+	val.x[0] = tsunami_tig_readb(offset);
+	return val;
+}
+
+static void tsunami_flash_write8(struct map_info *map, map_word value, unsigned long offset)
+{
+	tsunami_tig_writeb(value.x[0], offset);
+}
+
+static void tsunami_flash_copy_from(
+	struct map_info *map, void *addr, unsigned long offset, ssize_t len)
+{
+	unsigned char *dest;
+	dest = addr;
+	while(len && (offset < MAX_TIG_FLASH_SIZE)) {
+		*dest = tsunami_tig_readb(offset);
+		offset++;
+		dest++;
+		len--;
+	}
+}
+
+static void tsunami_flash_copy_to(
+	struct map_info *map, unsigned long offset, 
+	const void *addr, ssize_t len)
+{
+	const unsigned char *src;
+	src = addr;
+	while(len && (offset < MAX_TIG_FLASH_SIZE)) {
+		tsunami_tig_writeb(*src, offset);
+		offset++;
+		src++;
+		len--;
+	}
+}
+
+/*
+ * Deliberately don't provide operations wider than 8 bits.  I don't
+ * have then and it scares me to think how you could mess up if
+ * you tried to use them.   Buswidth is correctly so I'm safe.
+ */
+static struct map_info tsunami_flash_map = {
+	.name = "flash chip on the Tsunami TIG bus",
+	.size = MAX_TIG_FLASH_SIZE,
+	.phys = NO_XIP;
+	.bankwidth = 1,
+	.read = tsunami_flash_read8,
+	.copy_from = tsunami_flash_copy_from,
+	.write = tsunami_flash_write8,
+	.copy_to = tsunami_flash_copy_to,
+};
+
+static struct mtd_info *tsunami_flash_mtd;
+
+static void __exit  cleanup_tsunami_flash(void)
+{
+	struct mtd_info *mtd;
+	mtd = tsunami_flash_mtd;
+	if (mtd) {
+		del_mtd_device(mtd);
+		map_destroy(mtd);
+	}
+	tsunami_flash_mtd = 0;
+}
+
+
+static int __init init_tsunami_flash(void)
+{
+	static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
+	char **type;
+
+	tsunami_tig_writeb(FLASH_ENABLE_BYTE, FLASH_ENABLE_PORT);
+	
+	tsunami_flash_mtd = 0;
+	type = rom_probe_types;
+	for(; !tsunami_flash_mtd && *type; type++) {
+		tsunami_flash_mtd = do_map_probe(*type, &tsunami_flash_map);
+	}
+	if (tsunami_flash_mtd) {
+		tsunami_flash_mtd->owner = THIS_MODULE;
+		add_mtd_device(tsunami_flash_mtd);
+		return 0;
+	}
+	return -ENXIO;
+}
+
+module_init(init_tsunami_flash);
+module_exit(cleanup_tsunami_flash);
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
new file mode 100644
index 000000000000..811d92e5f5b1
--- /dev/null
+++ b/drivers/mtd/maps/uclinux.c
@@ -0,0 +1,127 @@
+/****************************************************************************/
+
+/*
+ *	uclinux.c -- generic memory mapped MTD driver for uclinux
+ *
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * 	$Id: uclinux.c,v 1.10 2005/01/05 18:05:13 dwmw2 Exp $
+ */
+
+/****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
+/****************************************************************************/
+
+
+/****************************************************************************/
+
+struct map_info uclinux_ram_map = {
+	.name = "RAM",
+};
+
+struct mtd_info *uclinux_ram_mtdinfo;
+
+/****************************************************************************/
+
+struct mtd_partition uclinux_romfs[] = {
+	{ .name = "ROMfs" }
+};
+
+#define	NUM_PARTITIONS	(sizeof(uclinux_romfs) / sizeof(uclinux_romfs[0]))
+
+/****************************************************************************/
+
+int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len,
+	size_t *retlen, u_char **mtdbuf)
+{
+	struct map_info *map = mtd->priv;
+	*mtdbuf = (u_char *) (map->virt + ((int) from));
+	*retlen = len;
+	return(0);
+}
+
+/****************************************************************************/
+
+int __init uclinux_mtd_init(void)
+{
+	struct mtd_info *mtd;
+	struct map_info *mapp;
+	extern char _ebss;
+
+	mapp = &uclinux_ram_map;
+	mapp->phys = (unsigned long) &_ebss;
+	mapp->size = PAGE_ALIGN(*((unsigned long *)((&_ebss) + 8)));
+	mapp->bankwidth = 4;
+
+	printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n",
+	       	(int) mapp->map_priv_2, (int) mapp->size);
+
+	mapp->virt = ioremap_nocache(mapp->phys, mapp->size);
+
+	if (mapp->virt == 0) {
+		printk("uclinux[mtd]: ioremap_nocache() failed\n");
+		return(-EIO);
+	}
+
+	simple_map_init(mapp);
+
+	mtd = do_map_probe("map_ram", mapp);
+	if (!mtd) {
+		printk("uclinux[mtd]: failed to find a mapping?\n");
+		iounmap(mapp->virt);
+		return(-ENXIO);
+	}
+		
+	mtd->owner = THIS_MODULE;
+	mtd->point = uclinux_point;
+	mtd->priv = mapp;
+
+	uclinux_ram_mtdinfo = mtd;
+	add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS);
+
+	printk("uclinux[mtd]: set %s to be root filesystem\n",
+	     	uclinux_romfs[0].name);
+	ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 0);
+	put_mtd_device(mtd);
+
+	return(0);
+}
+
+/****************************************************************************/
+
+void __exit uclinux_mtd_cleanup(void)
+{
+	if (uclinux_ram_mtdinfo) {
+		del_mtd_partitions(uclinux_ram_mtdinfo);
+		map_destroy(uclinux_ram_mtdinfo);
+		uclinux_ram_mtdinfo = NULL;
+	}
+	if (uclinux_ram_map.map_priv_1) {
+		iounmap((void *) uclinux_ram_map.virt);
+		uclinux_ram_map.virt = 0;
+	}
+}
+
+/****************************************************************************/
+
+module_init(uclinux_mtd_init);
+module_exit(uclinux_mtd_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
+MODULE_DESCRIPTION("Generic RAM based MTD for uClinux");
+
+/****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
new file mode 100644
index 000000000000..c8c74110ed1b
--- /dev/null
+++ b/drivers/mtd/maps/vmax301.c
@@ -0,0 +1,198 @@
+// $Id: vmax301.c,v 1.30 2004/07/12 22:38:29 dwmw2 Exp $
+/* ######################################################################
+
+   Tempustech VMAX SBC301 MTD Driver.
+  
+   The VMAx 301 is a SBC based on . It
+   comes with three builtin AMD 29F016B flash chips and a socket for SRAM or
+   more flash. Each unit has it's own 8k mapping into a settable region 
+   (0xD8000). There are two 8k mappings for each MTD, the first is always set
+   to the lower 8k of the device the second is paged. Writing a 16 bit page
+   value to anywhere in the first 8k will cause the second 8k to page around.
+
+   To boot the device a bios extension must be installed into the first 8k 
+   of flash that is smart enough to copy itself down, page in the rest of 
+   itself and begin executing.
+   
+   ##################################################################### */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+
+
+#define WINDOW_START 0xd8000
+#define WINDOW_LENGTH 0x2000
+#define WINDOW_SHIFT 25
+#define WINDOW_MASK 0x1FFF
+
+/* Actually we could use two spinlocks, but we'd have to have
+   more private space in the struct map_info. We lose a little
+   performance like this, but we'd probably lose more by having
+   the extra indirection from having one of the map->map_priv 
+   fields pointing to yet another private struct.
+*/
+static DEFINE_SPINLOCK(vmax301_spin);
+
+static void __vmax301_page(struct map_info *map, unsigned long page)
+{
+	writew(page, map->map_priv_2 - WINDOW_LENGTH);
+	map->map_priv_1 = page;
+}
+
+static inline void vmax301_page(struct map_info *map,
+				  unsigned long ofs)
+{
+	unsigned long page = (ofs >> WINDOW_SHIFT);
+	if (map->map_priv_1 != page)
+		__vmax301_page(map, page);
+}
+
+static map_word vmax301_read8(struct map_info *map, unsigned long ofs)
+{
+	map_word ret;
+	spin_lock(&vmax301_spin);
+	vmax301_page(map, ofs);
+	ret.x[0] = readb(map->map_priv_2 + (ofs & WINDOW_MASK));
+	spin_unlock(&vmax301_spin);
+	return ret;
+}
+
+static void vmax301_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
+		spin_lock(&vmax301_spin);
+		vmax301_page(map, from);
+		memcpy_fromio(to, map->map_priv_2 + from, thislen);
+		spin_unlock(&vmax301_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static void vmax301_write8(struct map_info *map, map_word d, unsigned long adr)
+{
+	spin_lock(&vmax301_spin);
+	vmax301_page(map, adr);
+	writeb(d.x[0], map->map_priv_2 + (adr & WINDOW_MASK));
+	spin_unlock(&vmax301_spin);
+}
+
+static void vmax301_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
+
+		spin_lock(&vmax301_spin);
+		vmax301_page(map, to);
+		memcpy_toio(map->map_priv_2 + to, from, thislen);
+		spin_unlock(&vmax301_spin);		
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static struct map_info vmax_map[2] = {
+	{
+		.name = "VMAX301 Internal Flash",
+		.phys = NO_XIP,
+		.size = 3*2*1024*1024,
+		.bankwidth = 1,
+		.read = vmax301_read8,
+		.copy_from = vmax301_copy_from,
+		.write = vmax301_write8,
+		.copy_to = vmax301_copy_to,
+		.map_priv_1 = WINDOW_START + WINDOW_LENGTH,
+		.map_priv_2 = 0xFFFFFFFF
+	},
+	{
+		.name = "VMAX301 Socket",
+		.phys = NO_XIP,
+		.size = 0,
+		.bankwidth = 1,
+		.read = vmax301_read8,
+		.copy_from = vmax301_copy_from,
+		.write = vmax301_write8,
+		.copy_to = vmax301_copy_to,
+		.map_priv_1 = WINDOW_START + (3*WINDOW_LENGTH),
+		.map_priv_2 = 0xFFFFFFFF
+	}
+};
+
+static struct mtd_info *vmax_mtd[2] = {NULL, NULL};
+
+static void __exit cleanup_vmax301(void)
+{
+	int i;
+	
+	for (i=0; i<2; i++) {
+		if (vmax_mtd[i]) {
+			del_mtd_device(vmax_mtd[i]);
+			map_destroy(vmax_mtd[i]);
+		}
+	}
+	iounmap((void *)vmax_map[0].map_priv_1 - WINDOW_START);
+}
+
+int __init init_vmax301(void)
+{
+	int i;
+	unsigned long iomapadr;
+	// Print out our little header..
+	printk("Tempustech VMAX 301 MEM:0x%x-0x%x\n",WINDOW_START,
+	       WINDOW_START+4*WINDOW_LENGTH);
+
+	iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH*4);
+	if (!iomapadr) {
+		printk("Failed to ioremap memory region\n");
+		return -EIO;
+	}
+	/* Put the address in the map's private data area.
+	   We store the actual MTD IO address rather than the 
+	   address of the first half, because it's used more
+	   often. 
+	*/
+	vmax_map[0].map_priv_2 = iomapadr + WINDOW_START;
+	vmax_map[1].map_priv_2 = iomapadr + (3*WINDOW_START);
+	
+	for (i=0; i<2; i++) {
+		vmax_mtd[i] = do_map_probe("cfi_probe", &vmax_map[i]);
+		if (!vmax_mtd[i])
+			vmax_mtd[i] = do_map_probe("jedec", &vmax_map[i]);
+		if (!vmax_mtd[i])
+			vmax_mtd[i] = do_map_probe("map_ram", &vmax_map[i]);
+		if (!vmax_mtd[i])
+			vmax_mtd[i] = do_map_probe("map_rom", &vmax_map[i]);
+		if (vmax_mtd[i]) {
+			vmax_mtd[i]->owner = THIS_MODULE;
+			add_mtd_device(vmax_mtd[i]);
+		}
+	}
+
+	if (!vmax_mtd[1] && !vmax_mtd[2]) {
+		iounmap((void *)iomapadr);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+module_init(init_vmax301);
+module_exit(cleanup_vmax301);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("MTD map driver for Tempustech VMAX SBC301 board");
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
new file mode 100644
index 000000000000..d6137b1b5670
--- /dev/null
+++ b/drivers/mtd/maps/walnut.c
@@ -0,0 +1,122 @@
+/*
+ * $Id: walnut.c,v 1.2 2004/12/10 12:07:42 holindho Exp $
+ * 
+ * Mapping for Walnut flash
+ * (used ebony.c as a "framework")
+ * 
+ * Heikki Lindholm <holindho@infradead.org>
+ * 
+ * 
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+#include <linux/version.h>
+#include <asm/io.h>
+#include <asm/ibm4xx.h>
+#include <platforms/4xx/walnut.h>
+
+/* these should be in platforms/4xx/walnut.h ? */
+#define WALNUT_FLASH_ONBD_N(x)		(x & 0x02)
+#define WALNUT_FLASH_SRAM_SEL(x)	(x & 0x01)
+#define WALNUT_FLASH_LOW		0xFFF00000
+#define WALNUT_FLASH_HIGH		0xFFF80000
+#define WALNUT_FLASH_SIZE		0x80000
+
+static struct mtd_info *flash;
+
+static struct map_info walnut_map = {
+	.name =		"Walnut flash",
+	.size =		WALNUT_FLASH_SIZE,
+	.bankwidth =	1,
+};
+
+/* Actually, OpenBIOS is the last 128 KiB of the flash - better
+ * partitioning could be made */
+static struct mtd_partition walnut_partitions[] = {
+	{
+		.name =   "OpenBIOS",
+		.offset = 0x0,
+		.size =   WALNUT_FLASH_SIZE,
+		/*.mask_flags = MTD_WRITEABLE, */ /* force read-only */		
+	}
+};
+
+int __init init_walnut(void)
+{
+	u8 fpga_brds1;
+	void *fpga_brds1_adr;
+	void *fpga_status_adr;
+	unsigned long flash_base;
+
+	/* this should already be mapped (platform/4xx/walnut.c) */
+	fpga_status_adr = ioremap(WALNUT_FPGA_BASE, 8);
+	if (!fpga_status_adr)
+		return -ENOMEM;
+
+	fpga_brds1_adr = fpga_status_adr+5;
+	fpga_brds1 = readb(fpga_brds1_adr);
+	/* iounmap(fpga_status_adr); */
+
+	if (WALNUT_FLASH_ONBD_N(fpga_brds1)) {
+		printk("The on-board flash is disabled (U79 sw 5)!");
+		return -EIO;
+	}
+	if (WALNUT_FLASH_SRAM_SEL(fpga_brds1)) 
+		flash_base = WALNUT_FLASH_LOW;
+	else
+		flash_base = WALNUT_FLASH_HIGH;
+	
+	walnut_map.phys = flash_base;
+	walnut_map.virt =
+		(void __iomem *)ioremap(flash_base, walnut_map.size);
+
+	if (!walnut_map.virt) {
+		printk("Failed to ioremap flash.\n");
+		return -EIO;
+	}
+
+	simple_map_init(&walnut_map);
+
+	flash = do_map_probe("jedec_probe", &walnut_map);
+	if (flash) {
+		flash->owner = THIS_MODULE;
+		add_mtd_partitions(flash, walnut_partitions,
+					ARRAY_SIZE(walnut_partitions));
+	} else {
+		printk("map probe failed for flash\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void __exit cleanup_walnut(void)
+{
+	if (flash) {
+		del_mtd_partitions(flash);
+		map_destroy(flash);
+	}
+
+	if (walnut_map.virt) {
+		iounmap((void *)walnut_map.virt);
+		walnut_map.virt = 0;
+	}
+}
+
+module_init(init_walnut);
+module_exit(cleanup_walnut);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Heikki Lindholm <holindho@infradead.org>");
+MODULE_DESCRIPTION("MTD map and partitions for IBM 405GP Walnut boards");
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
new file mode 100644
index 000000000000..82b887b05707
--- /dev/null
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -0,0 +1,181 @@
+/*
+ * $Id: wr_sbc82xx_flash.c,v 1.7 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
+ *
+ * Copyright (C) 2004 Red Hat, Inc.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/config.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/immap_cpm2.h>
+
+static struct mtd_info *sbcmtd[3];
+static struct mtd_partition *sbcmtd_parts[3];
+
+struct map_info sbc82xx_flash_map[3] = {
+	{.name = "Boot flash"},
+	{.name = "Alternate boot flash"},
+	{.name = "User flash"}
+};
+
+static struct mtd_partition smallflash_parts[] = {
+	{
+		.name =		"space",
+		.size =		0x100000,
+		.offset =	0,
+	}, {
+		.name =		"bootloader",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	MTDPART_OFS_APPEND,
+	}
+};
+
+static struct mtd_partition bigflash_parts[] = {
+	{
+		.name =		"bootloader",
+		.size =		0x00100000,
+		.offset =	0,
+	}, {
+		.name =		"file system",
+		.size =		0x01f00000,
+		.offset =	MTDPART_OFS_APPEND,
+	}, {
+		.name =		"boot config",
+		.size =		0x00100000,
+		.offset =	MTDPART_OFS_APPEND,
+	}, {
+		.name =		"space",
+		.size =		0x01f00000,
+		.offset =	MTDPART_OFS_APPEND,
+	}
+};
+
+static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
+
+#define init_sbc82xx_one_flash(map, br, or)			\
+do {								\
+	(map).phys = (br & 1) ? (br & 0xffff8000) : 0;		\
+	(map).size = (br & 1) ? (~(or & 0xffff8000) + 1) : 0;	\
+	switch (br & 0x00001800) {				\
+	case 0x00000000:					\
+	case 0x00000800:	(map).bankwidth = 1;	break;	\
+	case 0x00001000:	(map).bankwidth = 2;	break;	\
+	case 0x00001800:	(map).bankwidth = 4;	break;	\
+	}							\
+} while (0);
+
+int __init init_sbc82xx_flash(void)
+{
+	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
+	int bigflash;
+	int i;
+
+#ifdef CONFIG_SBC8560
+	mc = ioremap(0xff700000 + 0x5000, sizeof(memctl_cpm2_t));
+#else
+	mc = &cpm2_immr->im_memctl;
+#endif
+
+	bigflash = 1;
+	if ((mc->memc_br0 & 0x00001800) == 0x00001800)
+		bigflash = 0;
+
+	init_sbc82xx_one_flash(sbc82xx_flash_map[0], mc->memc_br0, mc->memc_or0);
+	init_sbc82xx_one_flash(sbc82xx_flash_map[1], mc->memc_br6, mc->memc_or6);
+	init_sbc82xx_one_flash(sbc82xx_flash_map[2], mc->memc_br1, mc->memc_or1);
+
+#ifdef CONFIG_SBC8560
+	iounmap((void *) mc);
+#endif
+
+	for (i=0; i<3; i++) {
+		int8_t flashcs[3] = { 0, 6, 1 };
+		int nr_parts;
+
+		printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
+		       sbc82xx_flash_map[i].name,
+		       (sbc82xx_flash_map[i].size >> 20),
+		       flashcs[i]);
+		if (!sbc82xx_flash_map[i].phys) {
+			/* We know it can't be at zero. */
+			printk("): disabled by bootloader.\n");
+			continue;
+		}
+		printk(" at %08lx)\n",  sbc82xx_flash_map[i].phys);
+
+		sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys, sbc82xx_flash_map[i].size);
+
+		if (!sbc82xx_flash_map[i].virt) {
+			printk("Failed to ioremap\n");
+			continue;
+		}
+
+		simple_map_init(&sbc82xx_flash_map[i]);
+
+		sbcmtd[i] = do_map_probe("cfi_probe", &sbc82xx_flash_map[i]);
+
+		if (!sbcmtd[i])
+			continue;
+
+		sbcmtd[i]->owner = THIS_MODULE;
+
+		nr_parts = parse_mtd_partitions(sbcmtd[i], part_probes,
+						&sbcmtd_parts[i], 0);
+		if (nr_parts > 0) {
+			add_mtd_partitions (sbcmtd[i], sbcmtd_parts[i], nr_parts);
+			continue;
+		}
+
+		/* No partitioning detected. Use default */
+		if (i == 2) {
+			add_mtd_device(sbcmtd[i]);
+		} else if (i == bigflash) {
+			add_mtd_partitions (sbcmtd[i], bigflash_parts, ARRAY_SIZE(bigflash_parts));
+		} else {
+			add_mtd_partitions (sbcmtd[i], smallflash_parts, ARRAY_SIZE(smallflash_parts));
+		}
+	}
+	return 0;
+}
+
+static void __exit cleanup_sbc82xx_flash(void)
+{
+	int i;
+
+	for (i=0; i<3; i++) {
+		if (!sbcmtd[i])
+			continue;
+
+		if (i<2 || sbcmtd_parts[i])
+			del_mtd_partitions(sbcmtd[i]);
+		else
+			del_mtd_device(sbcmtd[i]);
+			
+		kfree(sbcmtd_parts[i]);
+		map_destroy(sbcmtd[i]);
+		
+		iounmap((void *)sbc82xx_flash_map[i].virt);
+		sbc82xx_flash_map[i].virt = 0;
+	}
+}
+
+module_init(init_sbc82xx_flash);
+module_exit(cleanup_sbc82xx_flash);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Flash map driver for WindRiver PowerQUICC II");
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
new file mode 100644
index 000000000000..f8d2185819e7
--- /dev/null
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -0,0 +1,478 @@
+/*
+ * $Id: mtd_blkdevs.c,v 1.24 2004/11/16 18:28:59 dwmw2 Exp $
+ *
+ * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Interface to Linux 2.5 block layer for MTD 'translation layers'.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/fs.h>
+#include <linux/mtd/blktrans.h>
+#include <linux/mtd/mtd.h>
+#include <linux/blkdev.h>
+#include <linux/blkpg.h>
+#include <linux/spinlock.h>
+#include <linux/hdreg.h>
+#include <linux/init.h>
+#include <asm/semaphore.h>
+#include <asm/uaccess.h>
+#include <linux/devfs_fs_kernel.h>
+
+static LIST_HEAD(blktrans_majors);
+
+extern struct semaphore mtd_table_mutex;
+extern struct mtd_info *mtd_table[];
+
+struct mtd_blkcore_priv {
+	struct completion thread_dead;
+	int exiting;
+	wait_queue_head_t thread_wq;
+	struct request_queue *rq;
+	spinlock_t queue_lock;
+};
+
+static int do_blktrans_request(struct mtd_blktrans_ops *tr,
+			       struct mtd_blktrans_dev *dev,
+			       struct request *req)
+{
+	unsigned long block, nsect;
+	char *buf;
+
+	block = req->sector;
+	nsect = req->current_nr_sectors;
+	buf = req->buffer;
+
+	if (!(req->flags & REQ_CMD))
+		return 0;
+
+	if (block + nsect > get_capacity(req->rq_disk))
+		return 0;
+
+	switch(rq_data_dir(req)) {
+	case READ:
+		for (; nsect > 0; nsect--, block++, buf += 512)
+			if (tr->readsect(dev, block, buf))
+				return 0;
+		return 1;
+
+	case WRITE:
+		if (!tr->writesect)
+			return 0;
+
+		for (; nsect > 0; nsect--, block++, buf += 512)
+			if (tr->writesect(dev, block, buf))
+				return 0;
+		return 1;
+
+	default:
+		printk(KERN_NOTICE "Unknown request %ld\n", rq_data_dir(req));
+		return 0;
+	}
+}
+
+static int mtd_blktrans_thread(void *arg)
+{
+	struct mtd_blktrans_ops *tr = arg;
+	struct request_queue *rq = tr->blkcore_priv->rq;
+
+	/* we might get involved when memory gets low, so use PF_MEMALLOC */
+	current->flags |= PF_MEMALLOC | PF_NOFREEZE;
+
+	daemonize("%sd", tr->name);
+
+	/* daemonize() doesn't do this for us since some kernel threads
+	   actually want to deal with signals. We can't just call 
+	   exit_sighand() since that'll cause an oops when we finally
+	   do exit. */
+	spin_lock_irq(&current->sighand->siglock);
+	sigfillset(&current->blocked);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	spin_lock_irq(rq->queue_lock);
+		
+	while (!tr->blkcore_priv->exiting) {
+		struct request *req;
+		struct mtd_blktrans_dev *dev;
+		int res = 0;
+		DECLARE_WAITQUEUE(wait, current);
+
+		req = elv_next_request(rq);
+
+		if (!req) {
+			add_wait_queue(&tr->blkcore_priv->thread_wq, &wait);
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			spin_unlock_irq(rq->queue_lock);
+
+			schedule();
+			remove_wait_queue(&tr->blkcore_priv->thread_wq, &wait);
+
+			spin_lock_irq(rq->queue_lock);
+
+			continue;
+		}
+
+		dev = req->rq_disk->private_data;
+		tr = dev->tr;
+
+		spin_unlock_irq(rq->queue_lock);
+
+		down(&dev->sem);
+		res = do_blktrans_request(tr, dev, req);
+		up(&dev->sem);
+
+		spin_lock_irq(rq->queue_lock);
+
+		end_request(req, res);
+	}
+	spin_unlock_irq(rq->queue_lock);
+
+	complete_and_exit(&tr->blkcore_priv->thread_dead, 0);
+}
+
+static void mtd_blktrans_request(struct request_queue *rq)
+{
+	struct mtd_blktrans_ops *tr = rq->queuedata;
+	wake_up(&tr->blkcore_priv->thread_wq);
+}
+
+
+static int blktrans_open(struct inode *i, struct file *f)
+{
+	struct mtd_blktrans_dev *dev;
+	struct mtd_blktrans_ops *tr;
+	int ret = -ENODEV;
+
+	dev = i->i_bdev->bd_disk->private_data;
+	tr = dev->tr;
+
+	if (!try_module_get(dev->mtd->owner))
+		goto out;
+
+	if (!try_module_get(tr->owner))
+		goto out_tr;
+
+	/* FIXME: Locking. A hot pluggable device can go away 
+	   (del_mtd_device can be called for it) without its module
+	   being unloaded. */
+	dev->mtd->usecount++;
+
+	ret = 0;
+	if (tr->open && (ret = tr->open(dev))) {
+		dev->mtd->usecount--;
+		module_put(dev->mtd->owner);
+	out_tr:
+		module_put(tr->owner);
+	}
+ out:
+	return ret;
+}
+
+static int blktrans_release(struct inode *i, struct file *f)
+{
+	struct mtd_blktrans_dev *dev;
+	struct mtd_blktrans_ops *tr;
+	int ret = 0;
+
+	dev = i->i_bdev->bd_disk->private_data;
+	tr = dev->tr;
+
+	if (tr->release)
+		ret = tr->release(dev);
+
+	if (!ret) {
+		dev->mtd->usecount--;
+		module_put(dev->mtd->owner);
+		module_put(tr->owner);
+	}
+
+	return ret;
+}
+
+
+static int blktrans_ioctl(struct inode *inode, struct file *file, 
+			      unsigned int cmd, unsigned long arg)
+{
+	struct mtd_blktrans_dev *dev = inode->i_bdev->bd_disk->private_data;
+	struct mtd_blktrans_ops *tr = dev->tr;
+
+	switch (cmd) {
+	case BLKFLSBUF:
+		if (tr->flush)
+			return tr->flush(dev);
+		/* The core code did the work, we had nothing to do. */
+		return 0;
+
+	case HDIO_GETGEO:
+		if (tr->getgeo) {
+			struct hd_geometry g;
+			int ret;
+
+			memset(&g, 0, sizeof(g));
+			ret = tr->getgeo(dev, &g);
+			if (ret)
+				return ret;
+
+			g.start = get_start_sect(inode->i_bdev);
+			if (copy_to_user((void __user *)arg, &g, sizeof(g)))
+				return -EFAULT;
+			return 0;
+		} /* else */
+	default:
+		return -ENOTTY;
+	}
+}
+
+struct block_device_operations mtd_blktrans_ops = {
+	.owner		= THIS_MODULE,
+	.open		= blktrans_open,
+	.release	= blktrans_release,
+	.ioctl		= blktrans_ioctl,
+};
+
+int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
+{
+	struct mtd_blktrans_ops *tr = new->tr;
+	struct list_head *this;
+	int last_devnum = -1;
+	struct gendisk *gd;
+
+	if (!down_trylock(&mtd_table_mutex)) {
+		up(&mtd_table_mutex);
+		BUG();
+	}
+
+	list_for_each(this, &tr->devs) {
+		struct mtd_blktrans_dev *d = list_entry(this, struct mtd_blktrans_dev, list);
+		if (new->devnum == -1) {
+			/* Use first free number */
+			if (d->devnum != last_devnum+1) {
+				/* Found a free devnum. Plug it in here */
+				new->devnum = last_devnum+1;
+				list_add_tail(&new->list, &d->list);
+				goto added;
+			}
+		} else if (d->devnum == new->devnum) {
+			/* Required number taken */
+			return -EBUSY;
+		} else if (d->devnum > new->devnum) {
+			/* Required number was free */
+			list_add_tail(&new->list, &d->list);
+			goto added;
+		} 
+		last_devnum = d->devnum;
+	}
+	if (new->devnum == -1)
+		new->devnum = last_devnum+1;
+
+	if ((new->devnum << tr->part_bits) > 256) {
+		return -EBUSY;
+	}
+
+	init_MUTEX(&new->sem);
+	list_add_tail(&new->list, &tr->devs);
+ added:
+	if (!tr->writesect)
+		new->readonly = 1;
+
+	gd = alloc_disk(1 << tr->part_bits);
+	if (!gd) {
+		list_del(&new->list);
+		return -ENOMEM;
+	}
+	gd->major = tr->major;
+	gd->first_minor = (new->devnum) << tr->part_bits;
+	gd->fops = &mtd_blktrans_ops;
+	
+	snprintf(gd->disk_name, sizeof(gd->disk_name),
+		 "%s%c", tr->name, (tr->part_bits?'a':'0') + new->devnum);
+	snprintf(gd->devfs_name, sizeof(gd->devfs_name),
+		 "%s/%c", tr->name, (tr->part_bits?'a':'0') + new->devnum);
+
+	/* 2.5 has capacity in units of 512 bytes while still
+	   having BLOCK_SIZE_BITS set to 10. Just to keep us amused. */
+	set_capacity(gd, (new->size * new->blksize) >> 9);
+
+	gd->private_data = new;
+	new->blkcore_priv = gd;
+	gd->queue = tr->blkcore_priv->rq;
+
+	if (new->readonly)
+		set_disk_ro(gd, 1);
+
+	add_disk(gd);
+	
+	return 0;
+}
+
+int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
+{
+	if (!down_trylock(&mtd_table_mutex)) {
+		up(&mtd_table_mutex);
+		BUG();
+	}
+
+	list_del(&old->list);
+
+	del_gendisk(old->blkcore_priv);
+	put_disk(old->blkcore_priv);
+		
+	return 0;
+}
+
+static void blktrans_notify_remove(struct mtd_info *mtd)
+{
+	struct list_head *this, *this2, *next;
+
+	list_for_each(this, &blktrans_majors) {
+		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
+
+		list_for_each_safe(this2, next, &tr->devs) {
+			struct mtd_blktrans_dev *dev = list_entry(this2, struct mtd_blktrans_dev, list);
+
+			if (dev->mtd == mtd)
+				tr->remove_dev(dev);
+		}
+	}
+}
+
+static void blktrans_notify_add(struct mtd_info *mtd)
+{
+	struct list_head *this;
+
+	if (mtd->type == MTD_ABSENT)
+		return;
+
+	list_for_each(this, &blktrans_majors) {
+		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
+
+		tr->add_mtd(tr, mtd);
+	}
+
+}
+
+static struct mtd_notifier blktrans_notifier = {
+	.add = blktrans_notify_add,
+	.remove = blktrans_notify_remove,
+};
+      
+int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
+{
+	int ret, i;
+
+	/* Register the notifier if/when the first device type is 
+	   registered, to prevent the link/init ordering from fucking
+	   us over. */
+	if (!blktrans_notifier.list.next)
+		register_mtd_user(&blktrans_notifier);
+
+	tr->blkcore_priv = kmalloc(sizeof(*tr->blkcore_priv), GFP_KERNEL);
+	if (!tr->blkcore_priv)
+		return -ENOMEM;
+
+	memset(tr->blkcore_priv, 0, sizeof(*tr->blkcore_priv));
+
+	down(&mtd_table_mutex);
+
+	ret = register_blkdev(tr->major, tr->name);
+	if (ret) {
+		printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
+		       tr->name, tr->major, ret);
+		kfree(tr->blkcore_priv);
+		up(&mtd_table_mutex);
+		return ret;
+	}
+	spin_lock_init(&tr->blkcore_priv->queue_lock);
+	init_completion(&tr->blkcore_priv->thread_dead);
+	init_waitqueue_head(&tr->blkcore_priv->thread_wq);
+
+	tr->blkcore_priv->rq = blk_init_queue(mtd_blktrans_request, &tr->blkcore_priv->queue_lock);
+	if (!tr->blkcore_priv->rq) {
+		unregister_blkdev(tr->major, tr->name);
+		kfree(tr->blkcore_priv);
+		up(&mtd_table_mutex);
+		return -ENOMEM;
+	}
+
+	tr->blkcore_priv->rq->queuedata = tr;
+
+	ret = kernel_thread(mtd_blktrans_thread, tr, CLONE_KERNEL);
+	if (ret < 0) {
+		blk_cleanup_queue(tr->blkcore_priv->rq);
+		unregister_blkdev(tr->major, tr->name);
+		kfree(tr->blkcore_priv);
+		up(&mtd_table_mutex);
+		return ret;
+	} 
+
+	devfs_mk_dir(tr->name);
+
+	INIT_LIST_HEAD(&tr->devs);
+	list_add(&tr->list, &blktrans_majors);
+
+	for (i=0; i<MAX_MTD_DEVICES; i++) {
+		if (mtd_table[i] && mtd_table[i]->type != MTD_ABSENT)
+			tr->add_mtd(tr, mtd_table[i]);
+	}
+
+	up(&mtd_table_mutex);
+
+	return 0;
+}
+
+int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
+{
+	struct list_head *this, *next;
+
+	down(&mtd_table_mutex);
+
+	/* Clean up the kernel thread */
+	tr->blkcore_priv->exiting = 1;
+	wake_up(&tr->blkcore_priv->thread_wq);
+	wait_for_completion(&tr->blkcore_priv->thread_dead);
+
+	/* Remove it from the list of active majors */
+	list_del(&tr->list);
+
+	list_for_each_safe(this, next, &tr->devs) {
+		struct mtd_blktrans_dev *dev = list_entry(this, struct mtd_blktrans_dev, list);
+		tr->remove_dev(dev);
+	}
+
+	devfs_remove(tr->name);
+	blk_cleanup_queue(tr->blkcore_priv->rq);
+	unregister_blkdev(tr->major, tr->name);
+
+	up(&mtd_table_mutex);
+
+	kfree(tr->blkcore_priv);
+
+	if (!list_empty(&tr->devs))
+		BUG();
+	return 0;
+}
+
+static void __exit mtd_blktrans_exit(void)
+{
+	/* No race here -- if someone's currently in register_mtd_blktrans
+	   we're screwed anyway. */
+	if (blktrans_notifier.list.next)
+		unregister_mtd_user(&blktrans_notifier);
+}
+
+module_exit(mtd_blktrans_exit);
+
+EXPORT_SYMBOL_GPL(register_mtd_blktrans);
+EXPORT_SYMBOL_GPL(deregister_mtd_blktrans);
+EXPORT_SYMBOL_GPL(add_mtd_blktrans_dev);
+EXPORT_SYMBOL_GPL(del_mtd_blktrans_dev);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Common interface to block layer for MTD 'translation layers'");
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
new file mode 100644
index 000000000000..b7c32c242bc7
--- /dev/null
+++ b/drivers/mtd/mtdblock.c
@@ -0,0 +1,394 @@
+/* 
+ * Direct MTD block device access
+ *
+ * $Id: mtdblock.c,v 1.66 2004/11/25 13:52:52 joern Exp $
+ *
+ * (C) 2000-2003 Nicolas Pitre <nico@cam.org>
+ * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/blktrans.h>
+
+static struct mtdblk_dev {
+	struct mtd_info *mtd;
+	int count;
+	struct semaphore cache_sem;
+	unsigned char *cache_data;
+	unsigned long cache_offset;
+	unsigned int cache_size;
+	enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
+} *mtdblks[MAX_MTD_DEVICES];
+
+/*
+ * Cache stuff...
+ * 
+ * Since typical flash erasable sectors are much larger than what Linux's
+ * buffer cache can handle, we must implement read-modify-write on flash
+ * sectors for each block write requests.  To avoid over-erasing flash sectors
+ * and to speed things up, we locally cache a whole flash sector while it is
+ * being written to until a different sector is required.
+ */
+
+static void erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static int erase_write (struct mtd_info *mtd, unsigned long pos, 
+			int len, const char *buf)
+{
+	struct erase_info erase;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	size_t retlen;
+	int ret;
+
+	/*
+	 * First, let's erase the flash block.
+	 */
+
+	init_waitqueue_head(&wait_q);
+	erase.mtd = mtd;
+	erase.callback = erase_callback;
+	erase.addr = pos;
+	erase.len = len;
+	erase.priv = (u_long)&wait_q;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&wait_q, &wait);
+
+	ret = MTD_ERASE(mtd, &erase);
+	if (ret) {
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&wait_q, &wait);
+		printk (KERN_WARNING "mtdblock: erase of region [0x%lx, 0x%x] "
+				     "on \"%s\" failed\n",
+			pos, len, mtd->name);
+		return ret;
+	}
+
+	schedule();  /* Wait for erase to finish. */
+	remove_wait_queue(&wait_q, &wait);
+
+	/*
+	 * Next, writhe data to flash.
+	 */
+
+	ret = MTD_WRITE (mtd, pos, len, &retlen, buf);
+	if (ret)
+		return ret;
+	if (retlen != len)
+		return -EIO;
+	return 0;
+}
+
+
+static int write_cached_data (struct mtdblk_dev *mtdblk)
+{
+	struct mtd_info *mtd = mtdblk->mtd;
+	int ret;
+
+	if (mtdblk->cache_state != STATE_DIRTY)
+		return 0;
+
+	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: writing cached data for \"%s\" "
+			"at 0x%lx, size 0x%x\n", mtd->name, 
+			mtdblk->cache_offset, mtdblk->cache_size);
+	
+	ret = erase_write (mtd, mtdblk->cache_offset, 
+			   mtdblk->cache_size, mtdblk->cache_data);
+	if (ret)
+		return ret;
+
+	/*
+	 * Here we could argubly set the cache state to STATE_CLEAN.
+	 * However this could lead to inconsistency since we will not 
+	 * be notified if this content is altered on the flash by other 
+	 * means.  Let's declare it empty and leave buffering tasks to
+	 * the buffer cache instead.
+	 */
+	mtdblk->cache_state = STATE_EMPTY;
+	return 0;
+}
+
+
+static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos, 
+			    int len, const char *buf)
+{
+	struct mtd_info *mtd = mtdblk->mtd;
+	unsigned int sect_size = mtdblk->cache_size;
+	size_t retlen;
+	int ret;
+
+	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
+		mtd->name, pos, len);
+	
+	if (!sect_size)
+		return MTD_WRITE (mtd, pos, len, &retlen, buf);
+
+	while (len > 0) {
+		unsigned long sect_start = (pos/sect_size)*sect_size;
+		unsigned int offset = pos - sect_start;
+		unsigned int size = sect_size - offset;
+		if( size > len ) 
+			size = len;
+
+		if (size == sect_size) {
+			/* 
+			 * We are covering a whole sector.  Thus there is no
+			 * need to bother with the cache while it may still be
+			 * useful for other partial writes.
+			 */
+			ret = erase_write (mtd, pos, size, buf);
+			if (ret)
+				return ret;
+		} else {
+			/* Partial sector: need to use the cache */
+
+			if (mtdblk->cache_state == STATE_DIRTY &&
+			    mtdblk->cache_offset != sect_start) {
+				ret = write_cached_data(mtdblk);
+				if (ret) 
+					return ret;
+			}
+
+			if (mtdblk->cache_state == STATE_EMPTY ||
+			    mtdblk->cache_offset != sect_start) {
+				/* fill the cache with the current sector */
+				mtdblk->cache_state = STATE_EMPTY;
+				ret = MTD_READ(mtd, sect_start, sect_size, &retlen, mtdblk->cache_data);
+				if (ret)
+					return ret;
+				if (retlen != sect_size)
+					return -EIO;
+
+				mtdblk->cache_offset = sect_start;
+				mtdblk->cache_size = sect_size;
+				mtdblk->cache_state = STATE_CLEAN;
+			}
+
+			/* write data to our local cache */
+			memcpy (mtdblk->cache_data + offset, buf, size);
+			mtdblk->cache_state = STATE_DIRTY;
+		}
+
+		buf += size;
+		pos += size;
+		len -= size;
+	}
+
+	return 0;
+}
+
+
+static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos, 
+			   int len, char *buf)
+{
+	struct mtd_info *mtd = mtdblk->mtd;
+	unsigned int sect_size = mtdblk->cache_size;
+	size_t retlen;
+	int ret;
+
+	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n", 
+			mtd->name, pos, len);
+	
+	if (!sect_size)
+		return MTD_READ (mtd, pos, len, &retlen, buf);
+
+	while (len > 0) {
+		unsigned long sect_start = (pos/sect_size)*sect_size;
+		unsigned int offset = pos - sect_start;
+		unsigned int size = sect_size - offset;
+		if (size > len) 
+			size = len;
+
+		/*
+		 * Check if the requested data is already cached
+		 * Read the requested amount of data from our internal cache if it
+		 * contains what we want, otherwise we read the data directly
+		 * from flash.
+		 */
+		if (mtdblk->cache_state != STATE_EMPTY &&
+		    mtdblk->cache_offset == sect_start) {
+			memcpy (buf, mtdblk->cache_data + offset, size);
+		} else {
+			ret = MTD_READ (mtd, pos, size, &retlen, buf);
+			if (ret)
+				return ret;
+			if (retlen != size)
+				return -EIO;
+		}
+
+		buf += size;
+		pos += size;
+		len -= size;
+	}
+
+	return 0;
+}
+
+static int mtdblock_readsect(struct mtd_blktrans_dev *dev,
+			      unsigned long block, char *buf)
+{
+	struct mtdblk_dev *mtdblk = mtdblks[dev->devnum];
+	return do_cached_read(mtdblk, block<<9, 512, buf);
+}
+
+static int mtdblock_writesect(struct mtd_blktrans_dev *dev,
+			      unsigned long block, char *buf)
+{
+	struct mtdblk_dev *mtdblk = mtdblks[dev->devnum];
+	if (unlikely(!mtdblk->cache_data && mtdblk->cache_size)) {
+		mtdblk->cache_data = vmalloc(mtdblk->mtd->erasesize);
+		if (!mtdblk->cache_data)
+			return -EINTR;
+		/* -EINTR is not really correct, but it is the best match
+		 * documented in man 2 write for all cases.  We could also
+		 * return -EAGAIN sometimes, but why bother?
+		 */
+	}
+	return do_cached_write(mtdblk, block<<9, 512, buf);
+}
+
+static int mtdblock_open(struct mtd_blktrans_dev *mbd)
+{
+	struct mtdblk_dev *mtdblk;
+	struct mtd_info *mtd = mbd->mtd;
+	int dev = mbd->devnum;
+
+	DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+	
+	if (mtdblks[dev]) {
+		mtdblks[dev]->count++;
+		return 0;
+	}
+	
+	/* OK, it's not open. Create cache info for it */
+	mtdblk = kmalloc(sizeof(struct mtdblk_dev), GFP_KERNEL);
+	if (!mtdblk)
+		return -ENOMEM;
+
+	memset(mtdblk, 0, sizeof(*mtdblk));
+	mtdblk->count = 1;
+	mtdblk->mtd = mtd;
+
+	init_MUTEX (&mtdblk->cache_sem);
+	mtdblk->cache_state = STATE_EMPTY;
+	if ((mtdblk->mtd->flags & MTD_CAP_RAM) != MTD_CAP_RAM &&
+	    mtdblk->mtd->erasesize) {
+		mtdblk->cache_size = mtdblk->mtd->erasesize;
+		mtdblk->cache_data = NULL;
+	}
+
+	mtdblks[dev] = mtdblk;
+	
+	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+
+	return 0;
+}
+
+static int mtdblock_release(struct mtd_blktrans_dev *mbd)
+{
+	int dev = mbd->devnum;
+	struct mtdblk_dev *mtdblk = mtdblks[dev];
+
+   	DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+
+	down(&mtdblk->cache_sem);
+	write_cached_data(mtdblk);
+	up(&mtdblk->cache_sem);
+
+	if (!--mtdblk->count) {
+		/* It was the last usage. Free the device */
+		mtdblks[dev] = NULL;
+		if (mtdblk->mtd->sync)
+			mtdblk->mtd->sync(mtdblk->mtd);
+		vfree(mtdblk->cache_data);
+		kfree(mtdblk);
+	}
+	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+
+	return 0;
+}  
+
+static int mtdblock_flush(struct mtd_blktrans_dev *dev)
+{
+	struct mtdblk_dev *mtdblk = mtdblks[dev->devnum];
+
+	down(&mtdblk->cache_sem);
+	write_cached_data(mtdblk);
+	up(&mtdblk->cache_sem);
+
+	if (mtdblk->mtd->sync)
+		mtdblk->mtd->sync(mtdblk->mtd);
+	return 0;
+}
+
+static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
+{
+	struct mtd_blktrans_dev *dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+
+	if (!dev)
+		return;
+
+	memset(dev, 0, sizeof(*dev));
+
+	dev->mtd = mtd;
+	dev->devnum = mtd->index;
+	dev->blksize = 512;
+	dev->size = mtd->size >> 9;
+	dev->tr = tr;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		dev->readonly = 1;
+
+	add_mtd_blktrans_dev(dev);
+}
+
+static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
+{
+	del_mtd_blktrans_dev(dev);
+	kfree(dev);
+}
+
+static struct mtd_blktrans_ops mtdblock_tr = {
+	.name		= "mtdblock",
+	.major		= 31,
+	.part_bits	= 0,
+	.open		= mtdblock_open,
+	.flush		= mtdblock_flush,
+	.release	= mtdblock_release,
+	.readsect	= mtdblock_readsect,
+	.writesect	= mtdblock_writesect,
+	.add_mtd	= mtdblock_add_mtd,
+	.remove_dev	= mtdblock_remove_dev,
+	.owner		= THIS_MODULE,
+};
+
+static int __init init_mtdblock(void)
+{
+	return register_mtd_blktrans(&mtdblock_tr);
+}
+
+static void __exit cleanup_mtdblock(void)
+{
+	deregister_mtd_blktrans(&mtdblock_tr);
+}
+
+module_init(init_mtdblock);
+module_exit(cleanup_mtdblock);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org> et al.");
+MODULE_DESCRIPTION("Caching read/erase/writeback block device emulation access to MTD devices");
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
new file mode 100644
index 000000000000..0c830ba41ef0
--- /dev/null
+++ b/drivers/mtd/mtdblock_ro.c
@@ -0,0 +1,87 @@
+/*
+ * $Id: mtdblock_ro.c,v 1.19 2004/11/16 18:28:59 dwmw2 Exp $
+ *
+ * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Simple read-only (writable only for RAM) mtdblock driver
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/blktrans.h>
+
+static int mtdblock_readsect(struct mtd_blktrans_dev *dev,
+			      unsigned long block, char *buf)
+{
+	size_t retlen;
+
+	if (dev->mtd->read(dev->mtd, (block * 512), 512, &retlen, buf))
+		return 1;
+	return 0;
+}
+
+static int mtdblock_writesect(struct mtd_blktrans_dev *dev,
+			      unsigned long block, char *buf)
+{
+	size_t retlen;
+
+	if (dev->mtd->write(dev->mtd, (block * 512), 512, &retlen, buf))
+		return 1;
+	return 0;
+}
+
+static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
+{
+	struct mtd_blktrans_dev *dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+
+	if (!dev)
+		return;
+
+	memset(dev, 0, sizeof(*dev));
+
+	dev->mtd = mtd;
+	dev->devnum = mtd->index;
+	dev->blksize = 512;
+	dev->size = mtd->size >> 9;
+	dev->tr = tr;
+	if ((mtd->flags & (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEABLE)) !=
+	    (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEABLE))
+		dev->readonly = 1;
+
+	add_mtd_blktrans_dev(dev);
+}
+
+static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
+{
+	del_mtd_blktrans_dev(dev);
+	kfree(dev);
+}
+
+static struct mtd_blktrans_ops mtdblock_tr = {
+	.name		= "mtdblock",
+	.major		= 31,
+	.part_bits	= 0,
+	.readsect	= mtdblock_readsect,
+	.writesect	= mtdblock_writesect,
+	.add_mtd	= mtdblock_add_mtd,
+	.remove_dev	= mtdblock_remove_dev,
+	.owner		= THIS_MODULE,
+};
+
+static int __init mtdblock_init(void)
+{
+	return register_mtd_blktrans(&mtdblock_tr);
+}
+
+static void __exit mtdblock_exit(void)
+{
+	deregister_mtd_blktrans(&mtdblock_tr);
+}
+
+module_init(mtdblock_init);
+module_exit(mtdblock_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Simple read-only block device emulation access to MTD devices");
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
new file mode 100644
index 000000000000..510ad78312cc
--- /dev/null
+++ b/drivers/mtd/mtdchar.c
@@ -0,0 +1,562 @@
+/*
+ * $Id: mtdchar.c,v 1.66 2005/01/05 18:05:11 dwmw2 Exp $
+ *
+ * Character-device access to raw MTD devices.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_DEVFS_FS
+#include <linux/devfs_fs_kernel.h>
+
+static void mtd_notify_add(struct mtd_info* mtd)
+{
+	if (!mtd)
+		return;
+
+	devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
+		      S_IFCHR | S_IRUGO | S_IWUGO, "mtd/%d", mtd->index);
+		
+	devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
+		      S_IFCHR | S_IRUGO, "mtd/%dro", mtd->index);
+}
+
+static void mtd_notify_remove(struct mtd_info* mtd)
+{
+	if (!mtd)
+		return;
+	devfs_remove("mtd/%d", mtd->index);
+	devfs_remove("mtd/%dro", mtd->index);
+}
+
+static struct mtd_notifier notifier = {
+	.add	= mtd_notify_add,
+	.remove	= mtd_notify_remove,
+};
+
+static inline void mtdchar_devfs_init(void)
+{
+	devfs_mk_dir("mtd");
+	register_mtd_user(&notifier);
+}
+
+static inline void mtdchar_devfs_exit(void)
+{
+	unregister_mtd_user(&notifier);
+	devfs_remove("mtd");
+}
+#else /* !DEVFS */
+#define mtdchar_devfs_init() do { } while(0)
+#define mtdchar_devfs_exit() do { } while(0)
+#endif
+
+static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
+{
+	struct mtd_info *mtd = file->private_data;
+
+	switch (orig) {
+	case 0:
+		/* SEEK_SET */
+		file->f_pos = offset;
+		break;
+	case 1:
+		/* SEEK_CUR */
+		file->f_pos += offset;
+		break;
+	case 2:
+		/* SEEK_END */
+		file->f_pos =mtd->size + offset;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (file->f_pos < 0)
+		file->f_pos = 0;
+	else if (file->f_pos >= mtd->size)
+		file->f_pos = mtd->size - 1;
+
+	return file->f_pos;
+}
+
+
+
+static int mtd_open(struct inode *inode, struct file *file)
+{
+	int minor = iminor(inode);
+	int devnum = minor >> 1;
+	struct mtd_info *mtd;
+
+	DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
+
+	if (devnum >= MAX_MTD_DEVICES)
+		return -ENODEV;
+
+	/* You can't open the RO devices RW */
+	if ((file->f_mode & 2) && (minor & 1))
+		return -EACCES;
+
+	mtd = get_mtd_device(NULL, devnum);
+	
+	if (!mtd)
+		return -ENODEV;
+	
+	if (MTD_ABSENT == mtd->type) {
+		put_mtd_device(mtd);
+		return -ENODEV;
+	}
+
+	file->private_data = mtd;
+		
+	/* You can't open it RW if it's not a writeable device */
+	if ((file->f_mode & 2) && !(mtd->flags & MTD_WRITEABLE)) {
+		put_mtd_device(mtd);
+		return -EACCES;
+	}
+		
+	return 0;
+} /* mtd_open */
+
+/*====================================================================*/
+
+static int mtd_close(struct inode *inode, struct file *file)
+{
+	struct mtd_info *mtd;
+
+	DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
+
+	mtd = file->private_data;
+	
+	if (mtd->sync)
+		mtd->sync(mtd);
+	
+	put_mtd_device(mtd);
+
+	return 0;
+} /* mtd_close */
+
+/* FIXME: This _really_ needs to die. In 2.5, we should lock the
+   userspace buffer down and use it directly with readv/writev.
+*/
+#define MAX_KMALLOC_SIZE 0x20000
+
+static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos)
+{
+	struct mtd_info *mtd = file->private_data;
+	size_t retlen=0;
+	size_t total_retlen=0;
+	int ret=0;
+	int len;
+	char *kbuf;
+	
+	DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+
+	if (*ppos + count > mtd->size)
+		count = mtd->size - *ppos;
+
+	if (!count)
+		return 0;
+	
+	/* FIXME: Use kiovec in 2.5 to lock down the user's buffers
+	   and pass them directly to the MTD functions */
+	while (count) {
+		if (count > MAX_KMALLOC_SIZE) 
+			len = MAX_KMALLOC_SIZE;
+		else
+			len = count;
+
+		kbuf=kmalloc(len,GFP_KERNEL);
+		if (!kbuf)
+			return -ENOMEM;
+		
+		ret = MTD_READ(mtd, *ppos, len, &retlen, kbuf);
+		/* Nand returns -EBADMSG on ecc errors, but it returns
+		 * the data. For our userspace tools it is important
+		 * to dump areas with ecc errors ! 
+		 * Userspace software which accesses NAND this way
+		 * must be aware of the fact that it deals with NAND
+		 */
+		if (!ret || (ret == -EBADMSG)) {
+			*ppos += retlen;
+			if (copy_to_user(buf, kbuf, retlen)) {
+			        kfree(kbuf);
+				return -EFAULT;
+			}
+			else
+				total_retlen += retlen;
+
+			count -= retlen;
+			buf += retlen;
+		}
+		else {
+			kfree(kbuf);
+			return ret;
+		}
+		
+		kfree(kbuf);
+	}
+
+	return total_retlen;
+} /* mtd_read */
+
+static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count,loff_t *ppos)
+{
+	struct mtd_info *mtd = file->private_data;
+	char *kbuf;
+	size_t retlen;
+	size_t total_retlen=0;
+	int ret=0;
+	int len;
+
+	DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+	
+	if (*ppos == mtd->size)
+		return -ENOSPC;
+	
+	if (*ppos + count > mtd->size)
+		count = mtd->size - *ppos;
+
+	if (!count)
+		return 0;
+
+	while (count) {
+		if (count > MAX_KMALLOC_SIZE) 
+			len = MAX_KMALLOC_SIZE;
+		else
+			len = count;
+
+		kbuf=kmalloc(len,GFP_KERNEL);
+		if (!kbuf) {
+			printk("kmalloc is null\n");
+			return -ENOMEM;
+		}
+
+		if (copy_from_user(kbuf, buf, len)) {
+			kfree(kbuf);
+			return -EFAULT;
+		}
+		
+	        ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf);
+		if (!ret) {
+			*ppos += retlen;
+			total_retlen += retlen;
+			count -= retlen;
+			buf += retlen;
+		}
+		else {
+			kfree(kbuf);
+			return ret;
+		}
+		
+		kfree(kbuf);
+	}
+
+	return total_retlen;
+} /* mtd_write */
+
+/*======================================================================
+
+    IOCTL calls for getting device parameters.
+
+======================================================================*/
+static void mtdchar_erase_callback (struct erase_info *instr)
+{
+	wake_up((wait_queue_head_t *)instr->priv);
+}
+
+static int mtd_ioctl(struct inode *inode, struct file *file,
+		     u_int cmd, u_long arg)
+{
+	struct mtd_info *mtd = file->private_data;
+	void __user *argp = (void __user *)arg;
+	int ret = 0;
+	u_long size;
+	
+	DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+
+	size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
+	if (cmd & IOC_IN) {
+		if (!access_ok(VERIFY_READ, argp, size))
+			return -EFAULT;
+	}
+	if (cmd & IOC_OUT) {
+		if (!access_ok(VERIFY_WRITE, argp, size))
+			return -EFAULT;
+	}
+	
+	switch (cmd) {
+	case MEMGETREGIONCOUNT:
+		if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
+			return -EFAULT;
+		break;
+
+	case MEMGETREGIONINFO:
+	{
+		struct region_info_user ur;
+
+		if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
+			return -EFAULT;
+
+		if (ur.regionindex >= mtd->numeraseregions)
+			return -EINVAL;
+		if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
+				sizeof(struct mtd_erase_region_info)))
+			return -EFAULT;
+		break;
+	}
+
+	case MEMGETINFO:
+		if (copy_to_user(argp, mtd, sizeof(struct mtd_info_user)))
+			return -EFAULT;
+		break;
+
+	case MEMERASE:
+	{
+		struct erase_info *erase;
+
+		if(!(file->f_mode & 2))
+			return -EPERM;
+
+		erase=kmalloc(sizeof(struct erase_info),GFP_KERNEL);
+		if (!erase)
+			ret = -ENOMEM;
+		else {
+			wait_queue_head_t waitq;
+			DECLARE_WAITQUEUE(wait, current);
+
+			init_waitqueue_head(&waitq);
+
+			memset (erase,0,sizeof(struct erase_info));
+			if (copy_from_user(&erase->addr, argp,
+				    sizeof(struct erase_info_user))) {
+				kfree(erase);
+				return -EFAULT;
+			}
+			erase->mtd = mtd;
+			erase->callback = mtdchar_erase_callback;
+			erase->priv = (unsigned long)&waitq;
+			
+			/*
+			  FIXME: Allow INTERRUPTIBLE. Which means
+			  not having the wait_queue head on the stack.
+			  
+			  If the wq_head is on the stack, and we
+			  leave because we got interrupted, then the
+			  wq_head is no longer there when the
+			  callback routine tries to wake us up.
+			*/
+			ret = mtd->erase(mtd, erase);
+			if (!ret) {
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				add_wait_queue(&waitq, &wait);
+				if (erase->state != MTD_ERASE_DONE &&
+				    erase->state != MTD_ERASE_FAILED)
+					schedule();
+				remove_wait_queue(&waitq, &wait);
+				set_current_state(TASK_RUNNING);
+
+				ret = (erase->state == MTD_ERASE_FAILED)?-EIO:0;
+			}
+			kfree(erase);
+		}
+		break;
+	}
+
+	case MEMWRITEOOB:
+	{
+		struct mtd_oob_buf buf;
+		void *databuf;
+		ssize_t retlen;
+		
+		if(!(file->f_mode & 2))
+			return -EPERM;
+
+		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
+			return -EFAULT;
+		
+		if (buf.length > 0x4096)
+			return -EINVAL;
+
+		if (!mtd->write_oob)
+			ret = -EOPNOTSUPP;
+		else
+			ret = access_ok(VERIFY_READ, buf.ptr,
+					buf.length) ? 0 : EFAULT;
+
+		if (ret)
+			return ret;
+
+		databuf = kmalloc(buf.length, GFP_KERNEL);
+		if (!databuf)
+			return -ENOMEM;
+		
+		if (copy_from_user(databuf, buf.ptr, buf.length)) {
+			kfree(databuf);
+			return -EFAULT;
+		}
+
+		ret = (mtd->write_oob)(mtd, buf.start, buf.length, &retlen, databuf);
+
+		if (copy_to_user(argp + sizeof(uint32_t), &retlen, sizeof(uint32_t)))
+			ret = -EFAULT;
+
+		kfree(databuf);
+		break;
+
+	}
+
+	case MEMREADOOB:
+	{
+		struct mtd_oob_buf buf;
+		void *databuf;
+		ssize_t retlen;
+
+		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
+			return -EFAULT;
+		
+		if (buf.length > 0x4096)
+			return -EINVAL;
+
+		if (!mtd->read_oob)
+			ret = -EOPNOTSUPP;
+		else
+			ret = access_ok(VERIFY_WRITE, buf.ptr,
+					buf.length) ? 0 : -EFAULT;
+
+		if (ret)
+			return ret;
+
+		databuf = kmalloc(buf.length, GFP_KERNEL);
+		if (!databuf)
+			return -ENOMEM;
+		
+		ret = (mtd->read_oob)(mtd, buf.start, buf.length, &retlen, databuf);
+
+		if (put_user(retlen, (uint32_t __user *)argp))
+			ret = -EFAULT;
+		else if (retlen && copy_to_user(buf.ptr, databuf, retlen))
+			ret = -EFAULT;
+		
+		kfree(databuf);
+		break;
+	}
+
+	case MEMLOCK:
+	{
+		struct erase_info_user info;
+
+		if (copy_from_user(&info, argp, sizeof(info)))
+			return -EFAULT;
+
+		if (!mtd->lock)
+			ret = -EOPNOTSUPP;
+		else
+			ret = mtd->lock(mtd, info.start, info.length);
+		break;
+	}
+
+	case MEMUNLOCK:
+	{
+		struct erase_info_user info;
+
+		if (copy_from_user(&info, argp, sizeof(info)))
+			return -EFAULT;
+
+		if (!mtd->unlock)
+			ret = -EOPNOTSUPP;
+		else
+			ret = mtd->unlock(mtd, info.start, info.length);
+		break;
+	}
+
+	case MEMSETOOBSEL:
+	{
+		if (copy_from_user(&mtd->oobinfo, argp, sizeof(struct nand_oobinfo)))
+			return -EFAULT;
+		break;
+	}
+
+	case MEMGETOOBSEL:
+	{
+		if (copy_to_user(argp, &(mtd->oobinfo), sizeof(struct nand_oobinfo)))
+			return -EFAULT;
+		break;
+	}
+
+	case MEMGETBADBLOCK:
+	{
+		loff_t offs;
+		
+		if (copy_from_user(&offs, argp, sizeof(loff_t)))
+			return -EFAULT;
+		if (!mtd->block_isbad)
+			ret = -EOPNOTSUPP;
+		else
+			return mtd->block_isbad(mtd, offs);
+		break;
+	}
+
+	case MEMSETBADBLOCK:
+	{
+		loff_t offs;
+
+		if (copy_from_user(&offs, argp, sizeof(loff_t)))
+			return -EFAULT;
+		if (!mtd->block_markbad)
+			ret = -EOPNOTSUPP;
+		else
+			return mtd->block_markbad(mtd, offs);
+		break;
+	}
+
+	default:
+		ret = -ENOTTY;
+	}
+
+	return ret;
+} /* memory_ioctl */
+
+static struct file_operations mtd_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= mtd_lseek,
+	.read		= mtd_read,
+	.write		= mtd_write,
+	.ioctl		= mtd_ioctl,
+	.open		= mtd_open,
+	.release	= mtd_close,
+};
+
+static int __init init_mtdchar(void)
+{
+	if (register_chrdev(MTD_CHAR_MAJOR, "mtd", &mtd_fops)) {
+		printk(KERN_NOTICE "Can't allocate major number %d for Memory Technology Devices.\n",
+		       MTD_CHAR_MAJOR);
+		return -EAGAIN;
+	}
+
+	mtdchar_devfs_init();
+	return 0;
+}
+
+static void __exit cleanup_mtdchar(void)
+{
+	mtdchar_devfs_exit();
+	unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
+}
+
+module_init(init_mtdchar);
+module_exit(cleanup_mtdchar);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Direct character-device access to MTD devices");
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
new file mode 100644
index 000000000000..8f66d093c80d
--- /dev/null
+++ b/drivers/mtd/mtdconcat.c
@@ -0,0 +1,897 @@
+/*
+ * MTD device concatenation layer
+ *
+ * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ *
+ * NAND support by Christian Gan <cgan@iders.ca>
+ *
+ * This code is GPL
+ *
+ * $Id: mtdconcat.c,v 1.9 2004/06/30 15:17:41 dbrown Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/concat.h>
+
+/*
+ * Our storage structure:
+ * Subdev points to an array of pointers to struct mtd_info objects
+ * which is allocated along with this structure
+ *
+ */
+struct mtd_concat {
+	struct mtd_info mtd;
+	int num_subdev;
+	struct mtd_info **subdev;
+};
+
+/*
+ * how to calculate the size required for the above structure,
+ * including the pointer array subdev points to:
+ */
+#define SIZEOF_STRUCT_MTD_CONCAT(num_subdev)	\
+	((sizeof(struct mtd_concat) + (num_subdev) * sizeof(struct mtd_info *)))
+
+/*
+ * Given a pointer to the MTD object in the mtd_concat structure,
+ * we can retrieve the pointer to that structure with this macro.
+ */
+#define CONCAT(x)  ((struct mtd_concat *)(x))
+
+/* 
+ * MTD methods which look up the relevant subdevice, translate the
+ * effective address and pass through to the subdevice.
+ */
+
+static int
+concat_read(struct mtd_info *mtd, loff_t from, size_t len,
+	    size_t * retlen, u_char * buf)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int err = -EINVAL;
+	int i;
+
+	*retlen = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, retsize;
+
+		if (from >= subdev->size) {
+			/* Not destined for this subdev */
+			size = 0;
+			from -= subdev->size;
+			continue;
+		}
+		if (from + len > subdev->size)
+			/* First part goes into this subdev */
+			size = subdev->size - from;
+		else
+			/* Entire transaction goes into this subdev */
+			size = len;
+
+		err = subdev->read(subdev, from, size, &retsize, buf);
+
+		if (err)
+			break;
+
+		*retlen += retsize;
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		buf += size;
+		from = 0;
+	}
+	return err;
+}
+
+static int
+concat_write(struct mtd_info *mtd, loff_t to, size_t len,
+	     size_t * retlen, const u_char * buf)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int err = -EINVAL;
+	int i;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+
+	*retlen = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, retsize;
+
+		if (to >= subdev->size) {
+			size = 0;
+			to -= subdev->size;
+			continue;
+		}
+		if (to + len > subdev->size)
+			size = subdev->size - to;
+		else
+			size = len;
+
+		if (!(subdev->flags & MTD_WRITEABLE))
+			err = -EROFS;
+		else
+			err = subdev->write(subdev, to, size, &retsize, buf);
+
+		if (err)
+			break;
+
+		*retlen += retsize;
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		buf += size;
+		to = 0;
+	}
+	return err;
+}
+
+static int
+concat_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t * retlen, u_char * buf, u_char * eccbuf,
+		struct nand_oobinfo *oobsel)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int err = -EINVAL;
+	int i;
+
+	*retlen = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, retsize;
+
+		if (from >= subdev->size) {
+			/* Not destined for this subdev */
+			size = 0;
+			from -= subdev->size;
+			continue;
+		}
+
+		if (from + len > subdev->size)
+			/* First part goes into this subdev */
+			size = subdev->size - from;
+		else
+			/* Entire transaction goes into this subdev */
+			size = len;
+
+		if (subdev->read_ecc)
+			err = subdev->read_ecc(subdev, from, size,
+					       &retsize, buf, eccbuf, oobsel);
+		else
+			err = -EINVAL;
+
+		if (err)
+			break;
+
+		*retlen += retsize;
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		buf += size;
+		if (eccbuf) {
+			eccbuf += subdev->oobsize;
+			/* in nand.c at least, eccbufs are
+			   tagged with 2 (int)eccstatus'; we
+			   must account for these */
+			eccbuf += 2 * (sizeof (int));
+		}
+		from = 0;
+	}
+	return err;
+}
+
+static int
+concat_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
+		 size_t * retlen, const u_char * buf, u_char * eccbuf,
+		 struct nand_oobinfo *oobsel)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int err = -EINVAL;
+	int i;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+
+	*retlen = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, retsize;
+
+		if (to >= subdev->size) {
+			size = 0;
+			to -= subdev->size;
+			continue;
+		}
+		if (to + len > subdev->size)
+			size = subdev->size - to;
+		else
+			size = len;
+
+		if (!(subdev->flags & MTD_WRITEABLE))
+			err = -EROFS;
+		else if (subdev->write_ecc)
+			err = subdev->write_ecc(subdev, to, size,
+						&retsize, buf, eccbuf, oobsel);
+		else
+			err = -EINVAL;
+
+		if (err)
+			break;
+
+		*retlen += retsize;
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		buf += size;
+		if (eccbuf)
+			eccbuf += subdev->oobsize;
+		to = 0;
+	}
+	return err;
+}
+
+static int
+concat_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t * retlen, u_char * buf)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int err = -EINVAL;
+	int i;
+
+	*retlen = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, retsize;
+
+		if (from >= subdev->size) {
+			/* Not destined for this subdev */
+			size = 0;
+			from -= subdev->size;
+			continue;
+		}
+		if (from + len > subdev->size)
+			/* First part goes into this subdev */
+			size = subdev->size - from;
+		else
+			/* Entire transaction goes into this subdev */
+			size = len;
+
+		if (subdev->read_oob)
+			err = subdev->read_oob(subdev, from, size,
+					       &retsize, buf);
+		else
+			err = -EINVAL;
+
+		if (err)
+			break;
+
+		*retlen += retsize;
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		buf += size;
+		from = 0;
+	}
+	return err;
+}
+
+static int
+concat_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
+		 size_t * retlen, const u_char * buf)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int err = -EINVAL;
+	int i;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+
+	*retlen = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, retsize;
+
+		if (to >= subdev->size) {
+			size = 0;
+			to -= subdev->size;
+			continue;
+		}
+		if (to + len > subdev->size)
+			size = subdev->size - to;
+		else
+			size = len;
+
+		if (!(subdev->flags & MTD_WRITEABLE))
+			err = -EROFS;
+		else if (subdev->write_oob)
+			err = subdev->write_oob(subdev, to, size, &retsize,
+						buf);
+		else
+			err = -EINVAL;
+
+		if (err)
+			break;
+
+		*retlen += retsize;
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		buf += size;
+		to = 0;
+	}
+	return err;
+}
+
+static void concat_erase_callback(struct erase_info *instr)
+{
+	wake_up((wait_queue_head_t *) instr->priv);
+}
+
+static int concat_dev_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+	int err;
+	wait_queue_head_t waitq;
+	DECLARE_WAITQUEUE(wait, current);
+
+	/*
+	 * This code was stol^H^H^H^Hinspired by mtdchar.c
+	 */
+	init_waitqueue_head(&waitq);
+
+	erase->mtd = mtd;
+	erase->callback = concat_erase_callback;
+	erase->priv = (unsigned long) &waitq;
+
+	/*
+	 * FIXME: Allow INTERRUPTIBLE. Which means
+	 * not having the wait_queue head on the stack.
+	 */
+	err = mtd->erase(mtd, erase);
+	if (!err) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		add_wait_queue(&waitq, &wait);
+		if (erase->state != MTD_ERASE_DONE
+		    && erase->state != MTD_ERASE_FAILED)
+			schedule();
+		remove_wait_queue(&waitq, &wait);
+		set_current_state(TASK_RUNNING);
+
+		err = (erase->state == MTD_ERASE_FAILED) ? -EIO : 0;
+	}
+	return err;
+}
+
+static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	struct mtd_info *subdev;
+	int i, err;
+	u_int32_t length, offset = 0;
+	struct erase_info *erase;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+
+	if (instr->addr > concat->mtd.size)
+		return -EINVAL;
+
+	if (instr->len + instr->addr > concat->mtd.size)
+		return -EINVAL;
+
+	/*
+	 * Check for proper erase block alignment of the to-be-erased area.
+	 * It is easier to do this based on the super device's erase
+	 * region info rather than looking at each particular sub-device
+	 * in turn.
+	 */
+	if (!concat->mtd.numeraseregions) {
+		/* the easy case: device has uniform erase block size */
+		if (instr->addr & (concat->mtd.erasesize - 1))
+			return -EINVAL;
+		if (instr->len & (concat->mtd.erasesize - 1))
+			return -EINVAL;
+	} else {
+		/* device has variable erase size */
+		struct mtd_erase_region_info *erase_regions =
+		    concat->mtd.eraseregions;
+
+		/*
+		 * Find the erase region where the to-be-erased area begins:
+		 */
+		for (i = 0; i < concat->mtd.numeraseregions &&
+		     instr->addr >= erase_regions[i].offset; i++) ;
+		--i;
+
+		/*
+		 * Now erase_regions[i] is the region in which the
+		 * to-be-erased area begins. Verify that the starting
+		 * offset is aligned to this region's erase size:
+		 */
+		if (instr->addr & (erase_regions[i].erasesize - 1))
+			return -EINVAL;
+
+		/*
+		 * now find the erase region where the to-be-erased area ends:
+		 */
+		for (; i < concat->mtd.numeraseregions &&
+		     (instr->addr + instr->len) >= erase_regions[i].offset;
+		     ++i) ;
+		--i;
+		/*
+		 * check if the ending offset is aligned to this region's erase size
+		 */
+		if ((instr->addr + instr->len) & (erase_regions[i].erasesize -
+						  1))
+			return -EINVAL;
+	}
+
+	instr->fail_addr = 0xffffffff;
+
+	/* make a local copy of instr to avoid modifying the caller's struct */
+	erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL);
+
+	if (!erase)
+		return -ENOMEM;
+
+	*erase = *instr;
+	length = instr->len;
+
+	/*
+	 * find the subdevice where the to-be-erased area begins, adjust
+	 * starting offset to be relative to the subdevice start
+	 */
+	for (i = 0; i < concat->num_subdev; i++) {
+		subdev = concat->subdev[i];
+		if (subdev->size <= erase->addr) {
+			erase->addr -= subdev->size;
+			offset += subdev->size;
+		} else {
+			break;
+		}
+	}
+
+	/* must never happen since size limit has been verified above */
+	if (i >= concat->num_subdev)
+		BUG();
+
+	/* now do the erase: */
+	err = 0;
+	for (; length > 0; i++) {
+		/* loop for all subdevices affected by this request */
+		subdev = concat->subdev[i];	/* get current subdevice */
+
+		/* limit length to subdevice's size: */
+		if (erase->addr + length > subdev->size)
+			erase->len = subdev->size - erase->addr;
+		else
+			erase->len = length;
+
+		if (!(subdev->flags & MTD_WRITEABLE)) {
+			err = -EROFS;
+			break;
+		}
+		length -= erase->len;
+		if ((err = concat_dev_erase(subdev, erase))) {
+			/* sanity check: should never happen since
+			 * block alignment has been checked above */
+			if (err == -EINVAL)
+				BUG();
+			if (erase->fail_addr != 0xffffffff)
+				instr->fail_addr = erase->fail_addr + offset;
+			break;
+		}
+		/*
+		 * erase->addr specifies the offset of the area to be
+		 * erased *within the current subdevice*. It can be
+		 * non-zero only the first time through this loop, i.e.
+		 * for the first subdevice where blocks need to be erased.
+		 * All the following erases must begin at the start of the
+		 * current subdevice, i.e. at offset zero.
+		 */
+		erase->addr = 0;
+		offset += subdev->size;
+	}
+	instr->state = erase->state;
+	kfree(erase);
+	if (err)
+		return err;
+
+	if (instr->callback)
+		instr->callback(instr);
+	return 0;
+}
+
+static int concat_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i, err = -EINVAL;
+
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size;
+
+		if (ofs >= subdev->size) {
+			size = 0;
+			ofs -= subdev->size;
+			continue;
+		}
+		if (ofs + len > subdev->size)
+			size = subdev->size - ofs;
+		else
+			size = len;
+
+		err = subdev->lock(subdev, ofs, size);
+
+		if (err)
+			break;
+
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		ofs = 0;
+	}
+
+	return err;
+}
+
+static int concat_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i, err = 0;
+
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size;
+
+		if (ofs >= subdev->size) {
+			size = 0;
+			ofs -= subdev->size;
+			continue;
+		}
+		if (ofs + len > subdev->size)
+			size = subdev->size - ofs;
+		else
+			size = len;
+
+		err = subdev->unlock(subdev, ofs, size);
+
+		if (err)
+			break;
+
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		ofs = 0;
+	}
+
+	return err;
+}
+
+static void concat_sync(struct mtd_info *mtd)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		subdev->sync(subdev);
+	}
+}
+
+static int concat_suspend(struct mtd_info *mtd)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i, rc = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		if ((rc = subdev->suspend(subdev)) < 0)
+			return rc;
+	}
+	return rc;
+}
+
+static void concat_resume(struct mtd_info *mtd)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		subdev->resume(subdev);
+	}
+}
+
+/*
+ * This function constructs a virtual MTD device by concatenating
+ * num_devs MTD devices. A pointer to the new device object is
+ * stored to *new_dev upon success. This function does _not_
+ * register any devices: this is the caller's responsibility.
+ */
+struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to concatenate */
+				   int num_devs,	/* number of subdevices      */
+				   char *name)
+{				/* name for the new device   */
+	int i;
+	size_t size;
+	struct mtd_concat *concat;
+	u_int32_t max_erasesize, curr_erasesize;
+	int num_erase_region;
+
+	printk(KERN_NOTICE "Concatenating MTD devices:\n");
+	for (i = 0; i < num_devs; i++)
+		printk(KERN_NOTICE "(%d): \"%s\"\n", i, subdev[i]->name);
+	printk(KERN_NOTICE "into device \"%s\"\n", name);
+
+	/* allocate the device structure */
+	size = SIZEOF_STRUCT_MTD_CONCAT(num_devs);
+	concat = kmalloc(size, GFP_KERNEL);
+	if (!concat) {
+		printk
+		    ("memory allocation error while creating concatenated device \"%s\"\n",
+		     name);
+		return NULL;
+	}
+	memset(concat, 0, size);
+	concat->subdev = (struct mtd_info **) (concat + 1);
+
+	/*
+	 * Set up the new "super" device's MTD object structure, check for
+	 * incompatibilites between the subdevices.
+	 */
+	concat->mtd.type = subdev[0]->type;
+	concat->mtd.flags = subdev[0]->flags;
+	concat->mtd.size = subdev[0]->size;
+	concat->mtd.erasesize = subdev[0]->erasesize;
+	concat->mtd.oobblock = subdev[0]->oobblock;
+	concat->mtd.oobsize = subdev[0]->oobsize;
+	concat->mtd.ecctype = subdev[0]->ecctype;
+	concat->mtd.eccsize = subdev[0]->eccsize;
+	if (subdev[0]->read_ecc)
+		concat->mtd.read_ecc = concat_read_ecc;
+	if (subdev[0]->write_ecc)
+		concat->mtd.write_ecc = concat_write_ecc;
+	if (subdev[0]->read_oob)
+		concat->mtd.read_oob = concat_read_oob;
+	if (subdev[0]->write_oob)
+		concat->mtd.write_oob = concat_write_oob;
+
+	concat->subdev[0] = subdev[0];
+
+	for (i = 1; i < num_devs; i++) {
+		if (concat->mtd.type != subdev[i]->type) {
+			kfree(concat);
+			printk("Incompatible device type on \"%s\"\n",
+			       subdev[i]->name);
+			return NULL;
+		}
+		if (concat->mtd.flags != subdev[i]->flags) {
+			/*
+			 * Expect all flags except MTD_WRITEABLE to be
+			 * equal on all subdevices.
+			 */
+			if ((concat->mtd.flags ^ subdev[i]->
+			     flags) & ~MTD_WRITEABLE) {
+				kfree(concat);
+				printk("Incompatible device flags on \"%s\"\n",
+				       subdev[i]->name);
+				return NULL;
+			} else
+				/* if writeable attribute differs,
+				   make super device writeable */
+				concat->mtd.flags |=
+				    subdev[i]->flags & MTD_WRITEABLE;
+		}
+		concat->mtd.size += subdev[i]->size;
+		if (concat->mtd.oobblock   !=  subdev[i]->oobblock ||
+		    concat->mtd.oobsize    !=  subdev[i]->oobsize ||
+		    concat->mtd.ecctype    !=  subdev[i]->ecctype ||
+		    concat->mtd.eccsize    !=  subdev[i]->eccsize ||
+		    !concat->mtd.read_ecc  != !subdev[i]->read_ecc ||
+		    !concat->mtd.write_ecc != !subdev[i]->write_ecc ||
+		    !concat->mtd.read_oob  != !subdev[i]->read_oob ||
+		    !concat->mtd.write_oob != !subdev[i]->write_oob) {
+			kfree(concat);
+			printk("Incompatible OOB or ECC data on \"%s\"\n",
+			       subdev[i]->name);
+			return NULL;
+		}
+		concat->subdev[i] = subdev[i];
+
+	}
+
+	concat->num_subdev = num_devs;
+	concat->mtd.name = name;
+
+	/*
+	 * NOTE: for now, we do not provide any readv()/writev() methods
+	 *       because they are messy to implement and they are not
+	 *       used to a great extent anyway.
+	 */
+	concat->mtd.erase = concat_erase;
+	concat->mtd.read = concat_read;
+	concat->mtd.write = concat_write;
+	concat->mtd.sync = concat_sync;
+	concat->mtd.lock = concat_lock;
+	concat->mtd.unlock = concat_unlock;
+	concat->mtd.suspend = concat_suspend;
+	concat->mtd.resume = concat_resume;
+
+	/*
+	 * Combine the erase block size info of the subdevices:
+	 *
+	 * first, walk the map of the new device and see how
+	 * many changes in erase size we have
+	 */
+	max_erasesize = curr_erasesize = subdev[0]->erasesize;
+	num_erase_region = 1;
+	for (i = 0; i < num_devs; i++) {
+		if (subdev[i]->numeraseregions == 0) {
+			/* current subdevice has uniform erase size */
+			if (subdev[i]->erasesize != curr_erasesize) {
+				/* if it differs from the last subdevice's erase size, count it */
+				++num_erase_region;
+				curr_erasesize = subdev[i]->erasesize;
+				if (curr_erasesize > max_erasesize)
+					max_erasesize = curr_erasesize;
+			}
+		} else {
+			/* current subdevice has variable erase size */
+			int j;
+			for (j = 0; j < subdev[i]->numeraseregions; j++) {
+
+				/* walk the list of erase regions, count any changes */
+				if (subdev[i]->eraseregions[j].erasesize !=
+				    curr_erasesize) {
+					++num_erase_region;
+					curr_erasesize =
+					    subdev[i]->eraseregions[j].
+					    erasesize;
+					if (curr_erasesize > max_erasesize)
+						max_erasesize = curr_erasesize;
+				}
+			}
+		}
+	}
+
+	if (num_erase_region == 1) {
+		/*
+		 * All subdevices have the same uniform erase size.
+		 * This is easy:
+		 */
+		concat->mtd.erasesize = curr_erasesize;
+		concat->mtd.numeraseregions = 0;
+	} else {
+		/*
+		 * erase block size varies across the subdevices: allocate
+		 * space to store the data describing the variable erase regions
+		 */
+		struct mtd_erase_region_info *erase_region_p;
+		u_int32_t begin, position;
+
+		concat->mtd.erasesize = max_erasesize;
+		concat->mtd.numeraseregions = num_erase_region;
+		concat->mtd.eraseregions = erase_region_p =
+		    kmalloc(num_erase_region *
+			    sizeof (struct mtd_erase_region_info), GFP_KERNEL);
+		if (!erase_region_p) {
+			kfree(concat);
+			printk
+			    ("memory allocation error while creating erase region list"
+			     " for device \"%s\"\n", name);
+			return NULL;
+		}
+
+		/*
+		 * walk the map of the new device once more and fill in
+		 * in erase region info:
+		 */
+		curr_erasesize = subdev[0]->erasesize;
+		begin = position = 0;
+		for (i = 0; i < num_devs; i++) {
+			if (subdev[i]->numeraseregions == 0) {
+				/* current subdevice has uniform erase size */
+				if (subdev[i]->erasesize != curr_erasesize) {
+					/*
+					 *  fill in an mtd_erase_region_info structure for the area
+					 *  we have walked so far:
+					 */
+					erase_region_p->offset = begin;
+					erase_region_p->erasesize =
+					    curr_erasesize;
+					erase_region_p->numblocks =
+					    (position - begin) / curr_erasesize;
+					begin = position;
+
+					curr_erasesize = subdev[i]->erasesize;
+					++erase_region_p;
+				}
+				position += subdev[i]->size;
+			} else {
+				/* current subdevice has variable erase size */
+				int j;
+				for (j = 0; j < subdev[i]->numeraseregions; j++) {
+					/* walk the list of erase regions, count any changes */
+					if (subdev[i]->eraseregions[j].
+					    erasesize != curr_erasesize) {
+						erase_region_p->offset = begin;
+						erase_region_p->erasesize =
+						    curr_erasesize;
+						erase_region_p->numblocks =
+						    (position -
+						     begin) / curr_erasesize;
+						begin = position;
+
+						curr_erasesize =
+						    subdev[i]->eraseregions[j].
+						    erasesize;
+						++erase_region_p;
+					}
+					position +=
+					    subdev[i]->eraseregions[j].
+					    numblocks * curr_erasesize;
+				}
+			}
+		}
+		/* Now write the final entry */
+		erase_region_p->offset = begin;
+		erase_region_p->erasesize = curr_erasesize;
+		erase_region_p->numblocks = (position - begin) / curr_erasesize;
+	}
+
+	return &concat->mtd;
+}
+
+/* 
+ * This function destroys an MTD object obtained from concat_mtd_devs()
+ */
+
+void mtd_concat_destroy(struct mtd_info *mtd)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	if (concat->mtd.numeraseregions)
+		kfree(concat->mtd.eraseregions);
+	kfree(concat);
+}
+
+EXPORT_SYMBOL(mtd_concat_create);
+EXPORT_SYMBOL(mtd_concat_destroy);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Kaiser <rkaiser@sysgo.de>");
+MODULE_DESCRIPTION("Generic support for concatenating of MTD devices");
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
new file mode 100644
index 000000000000..9c0315d1b1c4
--- /dev/null
+++ b/drivers/mtd/mtdcore.c
@@ -0,0 +1,419 @@
+/*
+ * $Id: mtdcore.c,v 1.44 2004/11/16 18:28:59 dwmw2 Exp $
+ *
+ * Core registration and callback routines for MTD
+ * drivers and users.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/init.h>
+#include <linux/mtd/compatmac.h>
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#endif
+
+#include <linux/mtd/mtd.h>
+
+/* These are exported solely for the purpose of mtd_blkdevs.c. You 
+   should not use them for _anything_ else */
+DECLARE_MUTEX(mtd_table_mutex);
+struct mtd_info *mtd_table[MAX_MTD_DEVICES];
+
+EXPORT_SYMBOL_GPL(mtd_table_mutex);
+EXPORT_SYMBOL_GPL(mtd_table);
+
+static LIST_HEAD(mtd_notifiers);
+
+/**
+ *	add_mtd_device - register an MTD device
+ *	@mtd: pointer to new MTD device info structure
+ *
+ *	Add a device to the list of MTD devices present in the system, and
+ *	notify each currently active MTD 'user' of its arrival. Returns
+ *	zero on success or 1 on failure, which currently will only happen
+ *	if the number of present devices exceeds MAX_MTD_DEVICES (i.e. 16)
+ */
+
+int add_mtd_device(struct mtd_info *mtd)
+{
+	int i;
+
+	down(&mtd_table_mutex);
+
+	for (i=0; i < MAX_MTD_DEVICES; i++)
+		if (!mtd_table[i]) {
+			struct list_head *this;
+
+			mtd_table[i] = mtd;
+			mtd->index = i;
+			mtd->usecount = 0;
+
+			DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
+			/* No need to get a refcount on the module containing
+			   the notifier, since we hold the mtd_table_mutex */
+			list_for_each(this, &mtd_notifiers) {
+				struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+				not->add(mtd);
+			}
+			
+			up(&mtd_table_mutex);
+			/* We _know_ we aren't being removed, because
+			   our caller is still holding us here. So none
+			   of this try_ nonsense, and no bitching about it
+			   either. :) */
+			__module_get(THIS_MODULE);
+			return 0;
+		}
+	
+	up(&mtd_table_mutex);
+	return 1;
+}
+
+/**
+ *	del_mtd_device - unregister an MTD device
+ *	@mtd: pointer to MTD device info structure
+ *
+ *	Remove a device from the list of MTD devices present in the system,
+ *	and notify each currently active MTD 'user' of its departure.
+ *	Returns zero on success or 1 on failure, which currently will happen
+ *	if the requested device does not appear to be present in the list.
+ */
+
+int del_mtd_device (struct mtd_info *mtd)
+{
+	int ret;
+	
+	down(&mtd_table_mutex);
+
+	if (mtd_table[mtd->index] != mtd) {
+		ret = -ENODEV;
+	} else if (mtd->usecount) {
+		printk(KERN_NOTICE "Removing MTD device #%d (%s) with use count %d\n", 
+		       mtd->index, mtd->name, mtd->usecount);
+		ret = -EBUSY;
+	} else {
+		struct list_head *this;
+
+		/* No need to get a refcount on the module containing
+		   the notifier, since we hold the mtd_table_mutex */
+		list_for_each(this, &mtd_notifiers) {
+			struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+			not->remove(mtd);
+		}
+
+		mtd_table[mtd->index] = NULL;
+
+		module_put(THIS_MODULE);
+		ret = 0;
+	}
+
+	up(&mtd_table_mutex);
+	return ret;
+}
+
+/**
+ *	register_mtd_user - register a 'user' of MTD devices.
+ *	@new: pointer to notifier info structure
+ *
+ *	Registers a pair of callbacks function to be called upon addition
+ *	or removal of MTD devices. Causes the 'add' callback to be immediately
+ *	invoked for each MTD device currently present in the system.
+ */
+
+void register_mtd_user (struct mtd_notifier *new)
+{
+	int i;
+
+	down(&mtd_table_mutex);
+
+	list_add(&new->list, &mtd_notifiers);
+
+ 	__module_get(THIS_MODULE);
+	
+	for (i=0; i< MAX_MTD_DEVICES; i++)
+		if (mtd_table[i])
+			new->add(mtd_table[i]);
+
+	up(&mtd_table_mutex);
+}
+
+/**
+ *	register_mtd_user - unregister a 'user' of MTD devices.
+ *	@new: pointer to notifier info structure
+ *
+ *	Removes a callback function pair from the list of 'users' to be
+ *	notified upon addition or removal of MTD devices. Causes the
+ *	'remove' callback to be immediately invoked for each MTD device
+ *	currently present in the system.
+ */
+
+int unregister_mtd_user (struct mtd_notifier *old)
+{
+	int i;
+
+	down(&mtd_table_mutex);
+
+	module_put(THIS_MODULE);
+
+	for (i=0; i< MAX_MTD_DEVICES; i++)
+		if (mtd_table[i])
+			old->remove(mtd_table[i]);
+			
+	list_del(&old->list);
+	up(&mtd_table_mutex);
+	return 0;
+}
+
+
+/**
+ *	get_mtd_device - obtain a validated handle for an MTD device
+ *	@mtd: last known address of the required MTD device
+ *	@num: internal device number of the required MTD device
+ *
+ *	Given a number and NULL address, return the num'th entry in the device
+ *	table, if any.	Given an address and num == -1, search the device table
+ *	for a device with that address and return if it's still present. Given
+ *	both, return the num'th driver only if its address matches. Return NULL
+ *	if not.
+ */
+	
+struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
+{
+	struct mtd_info *ret = NULL;
+	int i;
+
+	down(&mtd_table_mutex);
+
+	if (num == -1) {
+		for (i=0; i< MAX_MTD_DEVICES; i++)
+			if (mtd_table[i] == mtd)
+				ret = mtd_table[i];
+	} else if (num < MAX_MTD_DEVICES) {
+		ret = mtd_table[num];
+		if (mtd && mtd != ret)
+			ret = NULL;
+	}
+
+	if (ret && !try_module_get(ret->owner))
+		ret = NULL;
+
+	if (ret)
+		ret->usecount++;
+
+	up(&mtd_table_mutex);
+	return ret;
+}
+
+void put_mtd_device(struct mtd_info *mtd)
+{
+	int c;
+
+	down(&mtd_table_mutex);
+	c = --mtd->usecount;
+	up(&mtd_table_mutex);
+	BUG_ON(c < 0);
+
+	module_put(mtd->owner);
+}
+
+/* default_mtd_writev - default mtd writev method for MTD devices that
+ *			dont implement their own
+ */
+
+int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		       unsigned long count, loff_t to, size_t *retlen)
+{
+	unsigned long i;
+	size_t totlen = 0, thislen;
+	int ret = 0;
+
+	if(!mtd->write) {
+		ret = -EROFS;
+	} else {
+		for (i=0; i<count; i++) {
+			if (!vecs[i].iov_len)
+				continue;
+			ret = mtd->write(mtd, to, vecs[i].iov_len, &thislen, vecs[i].iov_base);
+			totlen += thislen;
+			if (ret || thislen != vecs[i].iov_len)
+				break;
+			to += vecs[i].iov_len;
+		}
+	}
+	if (retlen)
+		*retlen = totlen;
+	return ret;
+}
+
+
+/* default_mtd_readv - default mtd readv method for MTD devices that dont
+ *		       implement their own
+ */
+
+int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
+		      unsigned long count, loff_t from, size_t *retlen)
+{
+	unsigned long i;
+	size_t totlen = 0, thislen;
+	int ret = 0;
+
+	if(!mtd->read) {
+		ret = -EIO;
+	} else {
+		for (i=0; i<count; i++) {
+			if (!vecs[i].iov_len)
+				continue;
+			ret = mtd->read(mtd, from, vecs[i].iov_len, &thislen, vecs[i].iov_base);
+			totlen += thislen;
+			if (ret || thislen != vecs[i].iov_len)
+				break;
+			from += vecs[i].iov_len;
+		}
+	}
+	if (retlen)
+		*retlen = totlen;
+	return ret;
+}
+
+
+EXPORT_SYMBOL(add_mtd_device);
+EXPORT_SYMBOL(del_mtd_device);
+EXPORT_SYMBOL(get_mtd_device);
+EXPORT_SYMBOL(put_mtd_device);
+EXPORT_SYMBOL(register_mtd_user);
+EXPORT_SYMBOL(unregister_mtd_user);
+EXPORT_SYMBOL(default_mtd_writev);
+EXPORT_SYMBOL(default_mtd_readv);
+
+/*====================================================================*/
+/* Power management code */
+
+#ifdef CONFIG_PM
+
+#include <linux/pm.h>
+
+static struct pm_dev *mtd_pm_dev = NULL;
+
+static int mtd_pm_callback(struct pm_dev *dev, pm_request_t rqst, void *data)
+{
+	int ret = 0, i;
+
+	if (down_trylock(&mtd_table_mutex))
+		return -EAGAIN;
+	if (rqst == PM_SUSPEND) {
+		for (i = 0; ret == 0 && i < MAX_MTD_DEVICES; i++) {
+			if (mtd_table[i] && mtd_table[i]->suspend)
+				ret = mtd_table[i]->suspend(mtd_table[i]);
+		}
+	} else i = MAX_MTD_DEVICES-1;
+
+	if (rqst == PM_RESUME || ret) {
+		for ( ; i >= 0; i--) {
+			if (mtd_table[i] && mtd_table[i]->resume)
+				mtd_table[i]->resume(mtd_table[i]);
+		}
+	}
+	up(&mtd_table_mutex);
+	return ret;
+}
+#endif
+
+/*====================================================================*/
+/* Support for /proc/mtd */
+
+#ifdef CONFIG_PROC_FS
+static struct proc_dir_entry *proc_mtd;
+
+static inline int mtd_proc_info (char *buf, int i)
+{
+	struct mtd_info *this = mtd_table[i];
+
+	if (!this)
+		return 0;
+
+	return sprintf(buf, "mtd%d: %8.8x %8.8x \"%s\"\n", i, this->size,
+		       this->erasesize, this->name);
+}
+
+static int mtd_read_proc (char *page, char **start, off_t off, int count,
+			  int *eof, void *data_unused)
+{
+	int len, l, i;
+        off_t   begin = 0;
+
+	down(&mtd_table_mutex);
+
+	len = sprintf(page, "dev:    size   erasesize  name\n");
+        for (i=0; i< MAX_MTD_DEVICES; i++) {
+
+                l = mtd_proc_info(page + len, i);
+                len += l;
+                if (len+begin > off+count)
+                        goto done;
+                if (len+begin < off) {
+                        begin += len;
+                        len = 0;
+                }
+        }
+
+        *eof = 1;
+
+done:
+	up(&mtd_table_mutex);
+        if (off >= len+begin)
+                return 0;
+        *start = page + (off-begin);
+        return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+#endif /* CONFIG_PROC_FS */
+
+/*====================================================================*/
+/* Init code */
+
+static int __init init_mtd(void)
+{
+#ifdef CONFIG_PROC_FS
+	if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
+		proc_mtd->read_proc = mtd_read_proc;
+#endif
+
+#ifdef CONFIG_PM
+	mtd_pm_dev = pm_register(PM_UNKNOWN_DEV, 0, mtd_pm_callback);
+#endif
+	return 0;
+}
+
+static void __exit cleanup_mtd(void)
+{
+#ifdef CONFIG_PM
+	if (mtd_pm_dev) {
+		pm_unregister(mtd_pm_dev);
+		mtd_pm_dev = NULL;
+	}
+#endif
+
+#ifdef CONFIG_PROC_FS
+        if (proc_mtd)
+		remove_proc_entry( "mtd", NULL);
+#endif
+}
+
+module_init(init_mtd);
+module_exit(cleanup_mtd);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Core MTD registration and access routines");
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
new file mode 100644
index 000000000000..96ebb52f24b1
--- /dev/null
+++ b/drivers/mtd/mtdpart.c
@@ -0,0 +1,599 @@
+/*
+ * Simple MTD partitioning layer
+ *
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ *
+ * This code is GPL
+ *
+ * $Id: mtdpart.c,v 1.51 2004/11/16 18:28:59 dwmw2 Exp $
+ *
+ * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
+ *			added support for read_oob, write_oob
+ */	
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/config.h>
+#include <linux/kmod.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/compatmac.h>
+
+/* Our partition linked list */
+static LIST_HEAD(mtd_partitions);
+
+/* Our partition node structure */
+struct mtd_part {
+	struct mtd_info mtd;
+	struct mtd_info *master;
+	u_int32_t offset;
+	int index;
+	struct list_head list;
+	int registered;
+};
+
+/*
+ * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
+ * the pointer to that structure with this macro.
+ */
+#define PART(x)  ((struct mtd_part *)(x))
+
+	
+/* 
+ * MTD methods which simply translate the effective address and pass through
+ * to the _real_ device.
+ */
+
+static int part_read (struct mtd_info *mtd, loff_t from, size_t len, 
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	if (from >= mtd->size)
+		len = 0;
+	else if (from + len > mtd->size)
+		len = mtd->size - from;
+	if (part->master->read_ecc == NULL)	
+		return part->master->read (part->master, from + part->offset, 
+					len, retlen, buf);
+	else
+		return part->master->read_ecc (part->master, from + part->offset, 
+					len, retlen, buf, NULL, &mtd->oobinfo);
+}
+
+static int part_point (struct mtd_info *mtd, loff_t from, size_t len, 
+			size_t *retlen, u_char **buf)
+{
+	struct mtd_part *part = PART(mtd);
+	if (from >= mtd->size)
+		len = 0;
+	else if (from + len > mtd->size)
+		len = mtd->size - from;
+	return part->master->point (part->master, from + part->offset, 
+				    len, retlen, buf);
+}
+static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+
+	part->master->unpoint (part->master, addr, from + part->offset, len);
+}
+
+
+static int part_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, 
+			size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel)
+{
+	struct mtd_part *part = PART(mtd);
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+	if (from >= mtd->size)
+		len = 0;
+	else if (from + len > mtd->size)
+		len = mtd->size - from;
+	return part->master->read_ecc (part->master, from + part->offset, 
+					len, retlen, buf, eccbuf, oobsel);
+}
+
+static int part_read_oob (struct mtd_info *mtd, loff_t from, size_t len, 
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	if (from >= mtd->size)
+		len = 0;
+	else if (from + len > mtd->size)
+		len = mtd->size - from;
+	return part->master->read_oob (part->master, from + part->offset, 
+					len, retlen, buf);
+}
+
+static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, 
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->read_user_prot_reg (part->master, from, 
+					len, retlen, buf);
+}
+
+static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, 
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->read_fact_prot_reg (part->master, from, 
+					len, retlen, buf);
+}
+
+static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (to >= mtd->size)
+		len = 0;
+	else if (to + len > mtd->size)
+		len = mtd->size - to;
+	if (part->master->write_ecc == NULL)	
+		return part->master->write (part->master, to + part->offset, 
+					len, retlen, buf);
+	else
+		return part->master->write_ecc (part->master, to + part->offset, 
+					len, retlen, buf, NULL, &mtd->oobinfo);
+							
+}
+
+static int part_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf,
+			 u_char *eccbuf, struct nand_oobinfo *oobsel)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+	if (to >= mtd->size)
+		len = 0;
+	else if (to + len > mtd->size)
+		len = mtd->size - to;
+	return part->master->write_ecc (part->master, to + part->offset, 
+					len, retlen, buf, eccbuf, oobsel);
+}
+
+static int part_write_oob (struct mtd_info *mtd, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (to >= mtd->size)
+		len = 0;
+	else if (to + len > mtd->size)
+		len = mtd->size - to;
+	return part->master->write_oob (part->master, to + part->offset, 
+					len, retlen, buf);
+}
+
+static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, 
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->write_user_prot_reg (part->master, from, 
+					len, retlen, buf);
+}
+
+static int part_writev (struct mtd_info *mtd,  const struct kvec *vecs,
+			 unsigned long count, loff_t to, size_t *retlen)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (part->master->writev_ecc == NULL)	
+		return part->master->writev (part->master, vecs, count,
+					to + part->offset, retlen);
+	else
+		return part->master->writev_ecc (part->master, vecs, count,
+					to + part->offset, retlen,
+					NULL, &mtd->oobinfo);
+}
+
+static int part_readv (struct mtd_info *mtd,  struct kvec *vecs,
+			 unsigned long count, loff_t from, size_t *retlen)
+{
+	struct mtd_part *part = PART(mtd);
+	if (part->master->readv_ecc == NULL)	
+		return part->master->readv (part->master, vecs, count,
+					from + part->offset, retlen);
+	else
+		return part->master->readv_ecc (part->master, vecs, count,
+					from + part->offset, retlen, 
+					NULL, &mtd->oobinfo);
+}
+
+static int part_writev_ecc (struct mtd_info *mtd,  const struct kvec *vecs,
+			 unsigned long count, loff_t to, size_t *retlen,
+			 u_char *eccbuf,  struct nand_oobinfo *oobsel)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+	return part->master->writev_ecc (part->master, vecs, count,
+					to + part->offset, retlen,
+					eccbuf, oobsel);
+}
+
+static int part_readv_ecc (struct mtd_info *mtd,  struct kvec *vecs,
+			 unsigned long count, loff_t from, size_t *retlen,
+			 u_char *eccbuf,  struct nand_oobinfo *oobsel)
+{
+	struct mtd_part *part = PART(mtd);
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+	return part->master->readv_ecc (part->master, vecs, count,
+					from + part->offset, retlen, 
+					eccbuf, oobsel);
+}
+
+static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct mtd_part *part = PART(mtd);
+	int ret;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (instr->addr >= mtd->size)
+		return -EINVAL;
+	instr->addr += part->offset;
+	ret = part->master->erase(part->master, instr);
+	return ret;
+}
+
+void mtd_erase_callback(struct erase_info *instr)
+{
+	if (instr->mtd->erase == part_erase) {
+		struct mtd_part *part = PART(instr->mtd);
+
+		if (instr->fail_addr != 0xffffffff)
+			instr->fail_addr -= part->offset;
+		instr->addr -= part->offset;
+	}
+	if (instr->callback)
+		instr->callback(instr);
+}
+EXPORT_SYMBOL_GPL(mtd_erase_callback);
+
+static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	if ((len + ofs) > mtd->size) 
+		return -EINVAL;
+	return part->master->lock(part->master, ofs + part->offset, len);
+}
+
+static int part_unlock (struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	if ((len + ofs) > mtd->size) 
+		return -EINVAL;
+	return part->master->unlock(part->master, ofs + part->offset, len);
+}
+
+static void part_sync(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	part->master->sync(part->master);
+}
+
+static int part_suspend(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->suspend(part->master);
+}
+
+static void part_resume(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	part->master->resume(part->master);
+}
+
+static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct mtd_part *part = PART(mtd);
+	if (ofs >= mtd->size)
+		return -EINVAL;
+	ofs += part->offset;
+	return part->master->block_isbad(part->master, ofs);
+}
+
+static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (ofs >= mtd->size)
+		return -EINVAL;
+	ofs += part->offset;
+	return part->master->block_markbad(part->master, ofs);
+}
+
+/* 
+ * This function unregisters and destroy all slave MTD objects which are 
+ * attached to the given master MTD object.
+ */
+
+int del_mtd_partitions(struct mtd_info *master)
+{
+	struct list_head *node;
+	struct mtd_part *slave;
+
+	for (node = mtd_partitions.next;
+	     node != &mtd_partitions;
+	     node = node->next) {
+		slave = list_entry(node, struct mtd_part, list);
+		if (slave->master == master) {
+			struct list_head *prev = node->prev;
+			__list_del(prev, node->next);
+			if(slave->registered)
+				del_mtd_device(&slave->mtd);
+			kfree(slave);
+			node = prev;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+ * the partition definitions.
+ * (Q: should we register the master MTD object as well?)
+ */
+
+int add_mtd_partitions(struct mtd_info *master, 
+		       const struct mtd_partition *parts,
+		       int nbparts)
+{
+	struct mtd_part *slave;
+	u_int32_t cur_offset = 0;
+	int i;
+
+	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+
+	for (i = 0; i < nbparts; i++) {
+
+		/* allocate the partition structure */
+		slave = kmalloc (sizeof(*slave), GFP_KERNEL);
+		if (!slave) {
+			printk ("memory allocation error while creating partitions for \"%s\"\n",
+				master->name);
+			del_mtd_partitions(master);
+			return -ENOMEM;
+		}
+		memset(slave, 0, sizeof(*slave));
+		list_add(&slave->list, &mtd_partitions);
+
+		/* set up the MTD object for this partition */
+		slave->mtd.type = master->type;
+		slave->mtd.flags = master->flags & ~parts[i].mask_flags;
+		slave->mtd.size = parts[i].size;
+		slave->mtd.oobblock = master->oobblock;
+		slave->mtd.oobsize = master->oobsize;
+		slave->mtd.ecctype = master->ecctype;
+		slave->mtd.eccsize = master->eccsize;
+
+		slave->mtd.name = parts[i].name;
+		slave->mtd.bank_size = master->bank_size;
+		slave->mtd.owner = master->owner;
+
+		slave->mtd.read = part_read;
+		slave->mtd.write = part_write;
+
+		if(master->point && master->unpoint){
+			slave->mtd.point = part_point;
+			slave->mtd.unpoint = part_unpoint;
+		}
+		
+		if (master->read_ecc)
+			slave->mtd.read_ecc = part_read_ecc;
+		if (master->write_ecc)
+			slave->mtd.write_ecc = part_write_ecc;
+		if (master->read_oob)
+			slave->mtd.read_oob = part_read_oob;
+		if (master->write_oob)
+			slave->mtd.write_oob = part_write_oob;
+		if(master->read_user_prot_reg)
+			slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+		if(master->read_fact_prot_reg)
+			slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+		if(master->write_user_prot_reg)
+			slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+		if (master->sync)
+			slave->mtd.sync = part_sync;
+		if (!i && master->suspend && master->resume) {
+				slave->mtd.suspend = part_suspend;
+				slave->mtd.resume = part_resume;
+		}
+		if (master->writev)
+			slave->mtd.writev = part_writev;
+		if (master->readv)
+			slave->mtd.readv = part_readv;
+		if (master->writev_ecc)
+			slave->mtd.writev_ecc = part_writev_ecc;
+		if (master->readv_ecc)
+			slave->mtd.readv_ecc = part_readv_ecc;
+		if (master->lock)
+			slave->mtd.lock = part_lock;
+		if (master->unlock)
+			slave->mtd.unlock = part_unlock;
+		if (master->block_isbad)
+			slave->mtd.block_isbad = part_block_isbad;
+		if (master->block_markbad)
+			slave->mtd.block_markbad = part_block_markbad;
+		slave->mtd.erase = part_erase;
+		slave->master = master;
+		slave->offset = parts[i].offset;
+		slave->index = i;
+
+		if (slave->offset == MTDPART_OFS_APPEND)
+			slave->offset = cur_offset;
+		if (slave->offset == MTDPART_OFS_NXTBLK) {
+			u_int32_t emask = master->erasesize-1;
+			slave->offset = (cur_offset + emask) & ~emask;
+			if (slave->offset != cur_offset) {
+				printk(KERN_NOTICE "Moving partition %d: "
+				       "0x%08x -> 0x%08x\n", i,
+				       cur_offset, slave->offset);
+			}
+		}
+		if (slave->mtd.size == MTDPART_SIZ_FULL)
+			slave->mtd.size = master->size - slave->offset;
+		cur_offset = slave->offset + slave->mtd.size;
+	
+		printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset, 
+			slave->offset + slave->mtd.size, slave->mtd.name);
+
+		/* let's do some sanity checks */
+		if (slave->offset >= master->size) {
+				/* let's register it anyway to preserve ordering */
+			slave->offset = 0;
+			slave->mtd.size = 0;
+			printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+				parts[i].name);
+		}
+		if (slave->offset + slave->mtd.size > master->size) {
+			slave->mtd.size = master->size - slave->offset;
+			printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+				parts[i].name, master->name, slave->mtd.size);
+		}
+		if (master->numeraseregions>1) {
+			/* Deal with variable erase size stuff */
+			int i;
+			struct mtd_erase_region_info *regions = master->eraseregions;
+			
+			/* Find the first erase regions which is part of this partition. */
+			for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
+				;
+
+			for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
+				if (slave->mtd.erasesize < regions[i].erasesize) {
+					slave->mtd.erasesize = regions[i].erasesize;
+				}
+			}
+		} else {
+			/* Single erase size */
+			slave->mtd.erasesize = master->erasesize;
+		}
+
+		if ((slave->mtd.flags & MTD_WRITEABLE) && 
+		    (slave->offset % slave->mtd.erasesize)) {
+			/* Doesn't start on a boundary of major erase size */
+			/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+			slave->mtd.flags &= ~MTD_WRITEABLE;
+			printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+				parts[i].name);
+		}
+		if ((slave->mtd.flags & MTD_WRITEABLE) && 
+		    (slave->mtd.size % slave->mtd.erasesize)) {
+			slave->mtd.flags &= ~MTD_WRITEABLE;
+			printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+				parts[i].name);
+		}
+
+		/* copy oobinfo from master */ 
+		memcpy(&slave->mtd.oobinfo, &master->oobinfo, sizeof(slave->mtd.oobinfo));
+
+		if(parts[i].mtdp)
+		{	/* store the object pointer (caller may or may not register it */
+			*parts[i].mtdp = &slave->mtd;
+			slave->registered = 0;
+		}
+		else
+		{
+			/* register our partition */
+			add_mtd_device(&slave->mtd);
+			slave->registered = 1;
+		}
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(add_mtd_partitions);
+EXPORT_SYMBOL(del_mtd_partitions);
+
+static DEFINE_SPINLOCK(part_parser_lock);
+static LIST_HEAD(part_parsers);
+
+static struct mtd_part_parser *get_partition_parser(const char *name)
+{
+	struct list_head *this;
+	void *ret = NULL;
+	spin_lock(&part_parser_lock);
+
+	list_for_each(this, &part_parsers) {
+		struct mtd_part_parser *p = list_entry(this, struct mtd_part_parser, list);
+
+		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
+			ret = p;
+			break;
+		}
+	}
+	spin_unlock(&part_parser_lock);
+
+	return ret;
+}
+
+int register_mtd_parser(struct mtd_part_parser *p)
+{
+	spin_lock(&part_parser_lock);
+	list_add(&p->list, &part_parsers);
+	spin_unlock(&part_parser_lock);
+
+	return 0;
+}
+
+int deregister_mtd_parser(struct mtd_part_parser *p)
+{
+	spin_lock(&part_parser_lock);
+	list_del(&p->list);
+	spin_unlock(&part_parser_lock);
+	return 0;
+}
+
+int parse_mtd_partitions(struct mtd_info *master, const char **types, 
+			 struct mtd_partition **pparts, unsigned long origin)
+{
+	struct mtd_part_parser *parser;
+	int ret = 0;
+		
+	for ( ; ret <= 0 && *types; types++) {
+		parser = get_partition_parser(*types);
+#ifdef CONFIG_KMOD
+		if (!parser && !request_module("%s", *types))
+				parser = get_partition_parser(*types);
+#endif
+		if (!parser) {
+			printk(KERN_NOTICE "%s partition parsing not available\n",
+			       *types);
+			continue;
+		}
+		ret = (*parser->parse_fn)(master, pparts, origin);
+		if (ret > 0) {
+			printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n", 
+			       ret, parser->name, master->name);
+		}
+		put_partition_parser(parser);
+	}
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(parse_mtd_partitions);
+EXPORT_SYMBOL_GPL(register_mtd_parser);
+EXPORT_SYMBOL_GPL(deregister_mtd_parser);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_DESCRIPTION("Generic support for partitioning of MTD devices");
+
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
new file mode 100644
index 000000000000..f7801eb730ce
--- /dev/null
+++ b/drivers/mtd/nand/Kconfig
@@ -0,0 +1,207 @@
+# drivers/mtd/nand/Kconfig
+# $Id: Kconfig,v 1.26 2005/01/05 12:42:24 dwmw2 Exp $
+
+menu "NAND Flash Device Drivers"
+	depends on MTD!=n
+
+config MTD_NAND
+	tristate "NAND Device Support"
+	depends on MTD
+	select MTD_NAND_IDS
+	help
+	  This enables support for accessing all type of NAND flash
+	  devices. For further information see
+	  <http://www.linux-mtd.infradead.org/tech/nand.html>.
+
+config MTD_NAND_VERIFY_WRITE
+	bool "Verify NAND page writes"
+	depends on MTD_NAND
+	help
+	  This adds an extra check when data is written to the flash. The
+	  NAND flash device internally checks only bits transitioning
+	  from 1 to 0. There is a rare possibility that even though the
+	  device thinks the write was successful, a bit could have been
+	  flipped accidentaly due to device wear or something else.
+
+config MTD_NAND_AUTCPU12
+	tristate "SmartMediaCard on autronix autcpu12 board"
+	depends on ARM && MTD_NAND && ARCH_AUTCPU12
+	help
+	  This enables the driver for the autronix autcpu12 board to 
+	  access the SmartMediaCard.
+
+config MTD_NAND_EDB7312
+	tristate "Support for Cirrus Logic EBD7312 evaluation board"
+	depends on ARM && MTD_NAND && ARCH_EDB7312
+	help
+	  This enables the driver for the Cirrus Logic EBD7312 evaluation 
+	  board to access the onboard NAND Flash.
+
+config MTD_NAND_H1900
+	tristate "iPAQ H1900 flash"
+	depends on ARM && MTD_NAND && ARCH_PXA && MTD_PARTITIONS
+	help
+	  This enables the driver for the iPAQ h1900 flash.
+
+config MTD_NAND_SPIA
+	tristate "NAND Flash device on SPIA board"
+	depends on ARM && ARCH_P720T && MTD_NAND
+	help
+	  If you had to ask, you don't have one. Say 'N'.
+
+config MTD_NAND_TOTO
+	tristate "NAND Flash device on TOTO board"
+	depends on ARM && ARCH_OMAP && MTD_NAND
+	help
+	  Support for NAND flash on Texas Instruments Toto platform.
+
+config MTD_NAND_IDS
+	tristate
+
+config MTD_NAND_TX4925NDFMC
+	tristate "SmartMedia Card on Toshiba RBTX4925 reference board"
+	depends on TOSHIBA_RBTX4925 && MTD_NAND && TOSHIBA_RBTX4925_MPLEX_NAND
+	help
+	  This enables the driver for the NAND flash device found on the
+	  Toshiba RBTX4925 reference board, which is a SmartMediaCard.
+
+config MTD_NAND_TX4938NDFMC
+	tristate "NAND Flash device on Toshiba RBTX4938 reference board"
+	depends on TOSHIBA_RBTX4938 && MTD_NAND && TOSHIBA_RBTX4938_MPLEX_NAND 
+	help
+	  This enables the driver for the NAND flash device found on the
+	  Toshiba RBTX4938 reference board.
+
+config MTD_NAND_AU1550
+	tristate "Au1550 NAND support"
+	depends on SOC_AU1550 && MTD_NAND
+	help
+	  This enables the driver for the NAND flash controller on the
+	  AMD/Alchemy 1550 SOC.
+
+config MTD_NAND_RTC_FROM4
+	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
+	depends on MTD_NAND && SH_SOLUTION_ENGINE
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC8
+	help
+	  This enables the driver for the Renesas Technology AG-AND 
+	  flash interface board (FROM_BOARD4)
+
+config MTD_NAND_PPCHAMELEONEVB
+	tristate "NAND Flash device on PPChameleonEVB board"
+	depends on PPCHAMELEONEVB && MTD_NAND
+	help
+	  This enables the NAND flash driver on the PPChameleon EVB Board.
+
+config MTD_NAND_S3C2410
+	tristate "NAND Flash support for S3C2410 SoC"
+	depends on ARCH_S3C2410 && MTD_NAND
+	help
+	  This enables the NAND flash controller on the S3C2410.
+
+	  No board specfic support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach. 
+
+config MTD_NAND_S3C2410_DEBUG
+	bool "S3C2410 NAND driver debug"
+	depends on MTD_NAND_S3C2410
+	help
+	  Enable debugging of the S3C2410 NAND driver
+
+config MTD_NAND_S3C2410_HWECC
+	bool "S3C2410 NAND Hardware ECC"
+	depends on MTD_NAND_S3C2410
+	help
+	  Enable the use of the S3C2410's internal ECC generator when
+	  using NAND. Early versions of the chip have had problems with
+	  incorrect ECC generation, and if using these, the default of
+	  software ECC is preferable.
+
+	  If you lay down a device with the hardware ECC, then you will
+	  currently not be able to switch to software, as there is no
+	  implementation for ECC method used by the S3C2410
+
+config MTD_NAND_DISKONCHIP
+	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
+	depends on MTD_NAND && EXPERIMENTAL
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC16
+	help
+	  This is a reimplementation of M-Systems DiskOnChip 2000,
+	  Millennium and Millennium Plus as a standard NAND device driver,
+	  as opposed to the earlier self-contained MTD device drivers.
+	  This should enable, among other things, proper JFFS2 operation on
+	  these devices.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+        bool "Advanced detection options for DiskOnChip"
+        depends on MTD_NAND_DISKONCHIP
+        help
+          This option allows you to specify nonstandard address at which to
+          probe for a DiskOnChip, or to change the detection options.  You
+          are unlikely to need any of this unless you are using LinuxBIOS.
+          Say 'N'.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+        hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+        depends on MTD_NAND_DISKONCHIP
+        default "0"
+        ---help---
+        By default, the probe for DiskOnChip devices will look for a
+        DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+        This option allows you to specify a single address at which to probe
+        for the device, which is useful if you have other devices in that
+        range which get upset when they are probed.
+
+        (Note that on PowerPC, the normal probe will only check at
+        0xE4000000.)
+
+        Normally, you should leave this set to zero, to allow the probe at
+        the normal addresses.
+
+config MTD_NAND_DISKONCHIP_PROBE_HIGH
+        bool "Probe high addresses"
+        depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+        help
+          By default, the probe for DiskOnChip devices will look for a
+          DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+          This option changes to make it probe between 0xFFFC8000 and
+          0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
+          useful to you.  Say 'N'.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+	bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+	depends on MTD_NAND_DISKONCHIP
+	help
+	  On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+	  and 2000 TSOP/Alon), Linux reserves some space at the end of the
+	  device for the Bad Block Table (BBT).  If you have existing INFTL
+	  data on your device (created by non-Linux tools such as M-Systems'
+	  DOS drivers), your data might overlap the area Linux wants to use for
+	  the BBT.  If this is a concern for you, leave this option disabled and
+	  Linux will not write BBT data into this area.
+	  The downside of leaving this option disabled is that if bad blocks
+	  are detected by Linux, they will not be recorded in the BBT, which
+	  could cause future problems.
+	  Once you enable this option, new filesystems (INFTL or others, created
+	  in Linux or other operating systems) will not use the reserved area.
+	  The only reason not to enable this option is to prevent damage to
+	  preexisting filesystems.
+	  Even if you leave this disabled, you can enable BBT writes at module
+	  load time (assuming you build diskonchip as a module) with the module
+	  parameter "inftl_bbt_write=1".
+	  
+ config MTD_NAND_SHARPSL
+ 	bool "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+ 	depends on MTD_NAND	&& ARCH_PXA
+ 
+ config MTD_NAND_NANDSIM
+ 	bool "Support for NAND Flash Simulator"
+ 	depends on MTD_NAND && MTD_PARTITIONS
+
+	help
+	  The simulator may simulate verious NAND flash chips for the
+	  MTD nand layer.
+ 
+endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
new file mode 100644
index 000000000000..d9dc8cc2da8c
--- /dev/null
+++ b/drivers/mtd/nand/Makefile
@@ -0,0 +1,24 @@
+#
+# linux/drivers/nand/Makefile
+#
+# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
+
+obj-$(CONFIG_MTD_NAND)			+= nand.o nand_ecc.o
+obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
+
+obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
+obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
+obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
+obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
+obj-$(CONFIG_MTD_NAND_TX4925NDFMC)	+= tx4925ndfmc.o
+obj-$(CONFIG_MTD_NAND_TX4938NDFMC)	+= tx4938ndfmc.o
+obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
+obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
+obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
+obj-$(CONFIG_MTD_NAND_DISKONCHIP)	+= diskonchip.o
+obj-$(CONFIG_MTD_NAND_H1900)		+= h1910.o
+obj-$(CONFIG_MTD_NAND_RTC_FROM4)	+= rtc_from4.o
+obj-$(CONFIG_MTD_NAND_SHARPSL)		+= sharpsl.o
+obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
+
+nand-objs = nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
new file mode 100644
index 000000000000..4c7719ce3f48
--- /dev/null
+++ b/drivers/mtd/nand/au1550nd.c
@@ -0,0 +1,477 @@
+/*
+ *  drivers/mtd/nand/au1550nd.c
+ *
+ *  Copyright (C) 2004 Embedded Edge, LLC
+ *
+ * $Id: au1550nd.c,v 1.11 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
+/* fixme: this is ugly */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
+#include <asm/mach-au1x00/au1000.h>
+#ifdef CONFIG_MIPS_PB1550
+#include <asm/mach-pb1x00/pb1550.h> 
+#endif
+#ifdef CONFIG_MIPS_DB1550
+#include <asm/mach-db1x00/db1x00.h> 
+#endif
+#else
+#include <asm/au1000.h>
+#ifdef CONFIG_MIPS_PB1550
+#include <asm/pb1550.h> 
+#endif
+#ifdef CONFIG_MIPS_DB1550
+#include <asm/db1x00.h> 
+#endif
+#endif
+
+/*
+ * MTD structure for NAND controller
+ */
+static struct mtd_info *au1550_mtd = NULL;
+static void __iomem *p_nand;
+static int nand_width = 1; /* default x8*/
+
+#define NAND_CS 1
+
+/*
+ * Define partitions for flash device
+ */
+const static struct mtd_partition partition_info[] = {
+#ifdef CONFIG_MIPS_PB1550
+#define NUM_PARTITIONS            2
+	{ 
+		.name = "Pb1550 NAND FS 0",
+	  	.offset = 0,
+	  	.size = 8*1024*1024 
+	},
+	{ 
+		.name = "Pb1550 NAND FS 1",
+		.offset =  MTDPART_OFS_APPEND,
+ 		.size =    MTDPART_SIZ_FULL
+	}
+#endif
+#ifdef CONFIG_MIPS_DB1550
+#define NUM_PARTITIONS            2
+	{ 
+		.name = "Db1550 NAND FS 0",
+	  	.offset = 0,
+	  	.size = 8*1024*1024 
+	},
+	{ 
+		.name = "Db1550 NAND FS 1",
+		.offset =  MTDPART_OFS_APPEND,
+ 		.size =    MTDPART_SIZ_FULL
+	}
+#endif
+};
+
+
+/**
+ * au_read_byte -  read one byte from the chip
+ * @mtd:	MTD device structure
+ *
+ *  read function for 8bit buswith
+ */
+static u_char au_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	u_char ret = readb(this->IO_ADDR_R);
+	au_sync();
+	return ret;
+}
+
+/**
+ * au_write_byte -  write one byte to the chip
+ * @mtd:	MTD device structure
+ * @byte:	pointer to data byte to write
+ *
+ *  write function for 8it buswith
+ */
+static void au_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	writeb(byte, this->IO_ADDR_W);
+	au_sync();
+}
+
+/**
+ * au_read_byte16 -  read one byte endianess aware from the chip
+ * @mtd:	MTD device structure
+ *
+ *  read function for 16bit buswith with 
+ * endianess conversion
+ */
+static u_char au_read_byte16(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	u_char ret = (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
+	au_sync();
+	return ret;
+}
+
+/**
+ * au_write_byte16 -  write one byte endianess aware to the chip
+ * @mtd:	MTD device structure
+ * @byte:	pointer to data byte to write
+ *
+ *  write function for 16bit buswith with
+ * endianess conversion
+ */
+static void au_write_byte16(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
+	au_sync();
+}
+
+/**
+ * au_read_word -  read one word from the chip
+ * @mtd:	MTD device structure
+ *
+ *  read function for 16bit buswith without 
+ * endianess conversion
+ */
+static u16 au_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	u16 ret = readw(this->IO_ADDR_R);
+	au_sync();
+	return ret;
+}
+
+/**
+ * au_write_word -  write one word to the chip
+ * @mtd:	MTD device structure
+ * @word:	data word to write
+ *
+ *  write function for 16bit buswith without 
+ * endianess conversion
+ */
+static void au_write_word(struct mtd_info *mtd, u16 word)
+{
+	struct nand_chip *this = mtd->priv;
+	writew(word, this->IO_ADDR_W);
+	au_sync();
+}
+
+/**
+ * au_write_buf -  write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ *
+ *  write function for 8bit buswith
+ */
+static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++) {
+		writeb(buf[i], this->IO_ADDR_W);
+		au_sync();
+	}
+}
+
+/**
+ * au_read_buf -  read chip data into buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ *
+ *  read function for 8bit buswith
+ */
+static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++) {
+		buf[i] = readb(this->IO_ADDR_R);
+		au_sync();	
+	}
+}
+
+/**
+ * au_verify_buf -  Verify chip data against buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to compare
+ * @len:	number of bytes to compare
+ *
+ *  verify function for 8bit buswith
+ */
+static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++) {
+		if (buf[i] != readb(this->IO_ADDR_R))
+			return -EFAULT;
+		au_sync();
+	}
+
+	return 0;
+}
+
+/**
+ * au_write_buf16 -  write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ *
+ *  write function for 16bit buswith
+ */
+static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+	
+	for (i=0; i<len; i++) {
+		writew(p[i], this->IO_ADDR_W);
+		au_sync();
+	}
+		
+}
+
+/**
+ * au_read_buf16 -  read chip data into buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ *
+ *  read function for 16bit buswith
+ */
+static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i=0; i<len; i++) {
+		p[i] = readw(this->IO_ADDR_R);
+		au_sync();
+	}
+}
+
+/**
+ * au_verify_buf16 -  Verify chip data against buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to compare
+ * @len:	number of bytes to compare
+ *
+ *  verify function for 16bit buswith
+ */
+static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i=0; i<len; i++) {
+		if (p[i] != readw(this->IO_ADDR_R))
+			return -EFAULT;
+		au_sync();
+	}
+	return 0;
+}
+
+
+static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	switch(cmd){
+
+	case NAND_CTL_SETCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; break;
+	case NAND_CTL_CLRCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; break;
+
+	case NAND_CTL_SETALE: this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; break;
+	case NAND_CTL_CLRALE: 
+		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; 
+		/* FIXME: Nobody knows why this is neccecary, 
+		 * but it works only that way */
+		udelay(1); 
+		break;
+
+	case NAND_CTL_SETNCE: 
+		/* assert (force assert) chip enable */
+		au_writel((1<<(4+NAND_CS)) , MEM_STNDCTL); break;
+		break;
+
+	case NAND_CTL_CLRNCE: 
+ 		/* deassert chip enable */
+		au_writel(0, MEM_STNDCTL); break;
+		break;
+	}
+
+	this->IO_ADDR_R = this->IO_ADDR_W;
+	
+	/* Drain the writebuffer */
+	au_sync();
+}
+
+int au1550_device_ready(struct mtd_info *mtd)
+{
+	int ret = (au_readl(MEM_STSTAT) & 0x1) ? 1 : 0;
+	au_sync();
+	return ret;
+}
+
+/*
+ * Main initialization routine
+ */
+int __init au1550_init (void)
+{
+	struct nand_chip *this;
+	u16 boot_swapboot = 0; /* default value */
+	int retval;
+
+	/* Allocate memory for MTD device structure and private data */
+	au1550_mtd = kmalloc (sizeof(struct mtd_info) + 
+			sizeof (struct nand_chip), GFP_KERNEL);
+	if (!au1550_mtd) {
+		printk ("Unable to allocate NAND MTD dev structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&au1550_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) au1550_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	au1550_mtd->priv = this;
+
+
+	/* MEM_STNDCTL: disable ints, disable nand boot */
+	au_writel(0, MEM_STNDCTL);
+
+#ifdef CONFIG_MIPS_PB1550
+	/* set gpio206 high */
+	au_writel(au_readl(GPIO2_DIR) & ~(1<<6), GPIO2_DIR);
+
+	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | 
+		((bcsr->status >> 6)  & 0x1);
+	switch (boot_swapboot) {
+		case 0:
+		case 2:
+		case 8:
+		case 0xC:
+		case 0xD:
+			/* x16 NAND Flash */
+			nand_width = 0;
+			break;
+		case 1:
+		case 9:
+		case 3:
+		case 0xE:
+		case 0xF:
+			/* x8 NAND Flash */
+			nand_width = 1;
+			break;
+		default:
+			printk("Pb1550 NAND: bad boot:swap\n");
+			retval = -EINVAL;
+			goto outmem;
+	}
+#endif
+
+	/* Configure RCE1 - should be done by YAMON */
+	au_writel(0x5 | (nand_width << 22), 0xB4001010); /* MEM_STCFG1 */
+	au_writel(NAND_TIMING, 0xB4001014); /* MEM_STTIME1 */
+	au_sync();
+
+	/* setup and enable chip select, MEM_STADDR1 */
+	/* we really need to decode offsets only up till 0x20 */
+	au_writel((1<<28) | (NAND_PHYS_ADDR>>4) | 
+			(((NAND_PHYS_ADDR + 0x1000)-1) & (0x3fff<<18)>>18), 
+			MEM_STADDR1);
+	au_sync();
+
+	p_nand = ioremap(NAND_PHYS_ADDR, 0x1000);
+
+	/* Set address of hardware control function */
+	this->hwcontrol = au1550_hwcontrol;
+	this->dev_ready = au1550_device_ready;
+	/* 30 us command delay time */
+	this->chip_delay = 30;		
+	this->eccmode = NAND_ECC_SOFT;
+
+	this->options = NAND_NO_AUTOINCR;
+
+	if (!nand_width)
+		this->options |= NAND_BUSWIDTH_16;
+
+	this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
+	this->write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
+	this->write_word = au_write_word;
+	this->read_word = au_read_word;
+	this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
+	this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
+	this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
+
+	/* Scan to find existence of the device */
+	if (nand_scan (au1550_mtd, 1)) {
+		retval = -ENXIO;
+		goto outio;
+	}
+
+	/* Register the partitions */
+	add_mtd_partitions(au1550_mtd, partition_info, NUM_PARTITIONS);
+
+	return 0;
+
+ outio:
+	iounmap ((void *)p_nand);
+	
+ outmem:
+	kfree (au1550_mtd);
+	return retval;
+}
+
+module_init(au1550_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit au1550_cleanup (void)
+{
+	struct nand_chip *this = (struct nand_chip *) &au1550_mtd[1];
+
+	/* Release resources, unregister device */
+	nand_release (au1550_mtd);
+
+	/* Free the MTD device structure */
+	kfree (au1550_mtd);
+
+	/* Unmap */
+	iounmap ((void *)p_nand);
+}
+module_exit(au1550_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Embedded Edge, LLC");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board");
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
new file mode 100644
index 000000000000..4afa8ced05ad
--- /dev/null
+++ b/drivers/mtd/nand/autcpu12.c
@@ -0,0 +1,225 @@
+/*
+ *  drivers/mtd/autcpu12.c
+ *
+ *  Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
+ *
+ *  Derived from drivers/mtd/spia.c
+ * 	 Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * 
+ * $Id: autcpu12.c,v 1.22 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device found on the
+ *   autronix autcpu12 board, which is a SmartMediaCard. It supports 
+ *   16MiB, 32MiB and 64MiB cards.
+ *
+ *
+ *	02-12-2002 TG	Cleanup of module params
+ *
+ *	02-20-2002 TG	adjusted for different rd/wr adress support
+ *			added support for read device ready/busy line
+ *			added page_cache
+ *
+ *	10-06-2002 TG	128K card support added
+ */
+
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/sizes.h>
+#include <asm/arch/autcpu12.h>
+
+/*
+ * MTD structure for AUTCPU12 board
+ */
+static struct mtd_info *autcpu12_mtd = NULL;
+
+static int autcpu12_io_base = CS89712_VIRT_BASE;
+static int autcpu12_fio_pbase = AUTCPU12_PHYS_SMC;
+static int autcpu12_fio_ctrl = AUTCPU12_SMC_SELECT_OFFSET;
+static int autcpu12_pedr = AUTCPU12_SMC_PORT_OFFSET;
+static void __iomem * autcpu12_fio_base;
+
+/*
+ * Define partitions for flash devices
+ */
+static struct mtd_partition partition_info16k[] = {
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 8 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 8 * SZ_1M,
+	  .size		= 8 * SZ_1M },
+};
+
+static struct mtd_partition partition_info32k[] = {
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 8 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 8 * SZ_1M,
+	  .size		= 24 * SZ_1M },
+};
+
+static struct mtd_partition partition_info64k[] = {
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 16 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 16 * SZ_1M,
+	  .size		= 48 * SZ_1M },
+};
+
+static struct mtd_partition partition_info128k[] = {
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 16 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 16 * SZ_1M,
+	  .size		= 112 * SZ_1M },
+};
+
+#define NUM_PARTITIONS16K 2
+#define NUM_PARTITIONS32K 2
+#define NUM_PARTITIONS64K 2
+#define NUM_PARTITIONS128K 2
+/* 
+ *	hardware specific access to control-lines
+*/
+static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+
+	switch(cmd){
+
+		case NAND_CTL_SETCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |=  AUTCPU12_SMC_CLE; break;
+		case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_CLE; break;
+
+		case NAND_CTL_SETALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |=  AUTCPU12_SMC_ALE; break;
+		case NAND_CTL_CLRALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_ALE; break;
+
+		case NAND_CTL_SETNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x01; break;
+		case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x00; break;
+	}
+}
+
+/*
+*	read device ready pin
+*/
+int autcpu12_device_ready(struct mtd_info *mtd)
+{
+
+	return ( (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) & AUTCPU12_SMC_RDY) ? 1 : 0;
+
+}
+
+/*
+ * Main initialization routine
+ */
+int __init autcpu12_init (void)
+{
+	struct nand_chip *this;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	autcpu12_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!autcpu12_mtd) {
+		printk ("Unable to allocate AUTCPU12 NAND MTD device structure.\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	/* map physical adress */
+	autcpu12_fio_base = ioremap(autcpu12_fio_pbase,SZ_1K);
+	if(!autcpu12_fio_base){
+		printk("Ioremap autcpu12 SmartMedia Card failed\n");
+		err = -EIO;
+		goto out_mtd;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&autcpu12_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) autcpu12_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	autcpu12_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = autcpu12_fio_base;
+	this->IO_ADDR_W = autcpu12_fio_base;
+	this->hwcontrol = autcpu12_hwcontrol;
+	this->dev_ready = autcpu12_device_ready;
+	/* 20 us command delay time */
+	this->chip_delay = 20;		
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Enable the following for a flash based bad block table */
+	/*
+	this->options = NAND_USE_FLASH_BBT;
+	*/
+	this->options = NAND_USE_FLASH_BBT;
+	
+	/* Scan to find existance of the device */
+	if (nand_scan (autcpu12_mtd, 1)) {
+		err = -ENXIO;
+		goto out_ior;
+	}
+	
+	/* Register the partitions */
+	switch(autcpu12_mtd->size){
+		case SZ_16M: add_mtd_partitions(autcpu12_mtd, partition_info16k, NUM_PARTITIONS16K); break;
+		case SZ_32M: add_mtd_partitions(autcpu12_mtd, partition_info32k, NUM_PARTITIONS32K); break;
+		case SZ_64M: add_mtd_partitions(autcpu12_mtd, partition_info64k, NUM_PARTITIONS64K); break; 
+		case SZ_128M: add_mtd_partitions(autcpu12_mtd, partition_info128k, NUM_PARTITIONS128K); break; 
+		default: {
+			printk ("Unsupported SmartMedia device\n"); 
+			err = -ENXIO;
+			goto out_ior;
+		}
+	}
+	goto out;
+
+out_ior:
+	iounmap((void *)autcpu12_fio_base);
+out_mtd:
+	kfree (autcpu12_mtd);
+out:
+	return err;
+}
+
+module_init(autcpu12_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit autcpu12_cleanup (void)
+{
+	/* Release resources, unregister device */
+	nand_release (autcpu12_mtd);
+
+	/* unmap physical adress */
+	iounmap((void *)autcpu12_fio_base);
+	
+	/* Free the MTD device structure */
+	kfree (autcpu12_mtd);
+}
+module_exit(autcpu12_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Glue layer for SmartMediaCard on autronix autcpu12");
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
new file mode 100644
index 000000000000..02135c3ac29a
--- /dev/null
+++ b/drivers/mtd/nand/diskonchip.c
@@ -0,0 +1,1782 @@
+/* 
+ * drivers/mtd/nand/diskonchip.c
+ *
+ * (C) 2003 Red Hat, Inc.
+ * (C) 2004 Dan Brown <dan_brown@ieee.org>
+ * (C) 2004 Kalev Lember <kalev@smartlink.ee>
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ * Additional Diskonchip 2000 and Millennium support by Dan Brown <dan_brown@ieee.org>
+ * Diskonchip Millennium Plus support by Kalev Lember <kalev@smartlink.ee>
+ * 
+ * Error correction code lifted from the old docecc code
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com) 
+ * Copyright (C) 2000 Netgem S.A.
+ * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
+ *  
+ * Interface to generic NAND code for M-Systems DiskOnChip devices
+ *
+ * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/rslib.h>
+#include <linux/moduleparam.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/doc2000.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/inftl.h>
+
+/* Where to look for the devices? */
+#ifndef CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS
+#define CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS 0
+#endif
+
+static unsigned long __initdata doc_locations[] = {
+#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH
+	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, 
+	0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
+	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, 
+	0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, 
+	0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
+#else /*  CONFIG_MTD_DOCPROBE_HIGH */
+	0xc8000, 0xca000, 0xcc000, 0xce000, 
+	0xd0000, 0xd2000, 0xd4000, 0xd6000,
+	0xd8000, 0xda000, 0xdc000, 0xde000, 
+	0xe0000, 0xe2000, 0xe4000, 0xe6000, 
+	0xe8000, 0xea000, 0xec000, 0xee000,
+#endif /*  CONFIG_MTD_DOCPROBE_HIGH */
+#elif defined(__PPC__)
+	0xe4000000,
+#elif defined(CONFIG_MOMENCO_OCELOT)
+	0x2f000000,
+        0xff000000,
+#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
+        0xff000000,
+##else
+#warning Unknown architecture for DiskOnChip. No default probe locations defined
+#endif
+	0xffffffff };
+
+static struct mtd_info *doclist = NULL;
+
+struct doc_priv {
+	void __iomem *virtadr;
+	unsigned long physadr;
+	u_char ChipID;
+	u_char CDSNControl;
+	int chips_per_floor; /* The number of chips detected on each floor */
+	int curfloor;
+	int curchip;
+	int mh0_page;
+	int mh1_page;
+	struct mtd_info *nextdoc;
+};
+
+/* Max number of eraseblocks to scan (from start of device) for the (I)NFTL
+   MediaHeader.  The spec says to just keep going, I think, but that's just
+   silly. */
+#define MAX_MEDIAHEADER_SCAN 8
+
+/* This is the syndrome computed by the HW ecc generator upon reading an empty
+   page, one with all 0xff for data and stored ecc code. */
+static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a };
+/* This is the ecc value computed by the HW ecc generator upon writing an empty
+   page, one with all 0xff for data. */
+static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 };
+
+#define INFTL_BBT_RESERVED_BLOCKS 4
+
+#define DoC_is_MillenniumPlus(doc) ((doc)->ChipID == DOC_ChipID_DocMilPlus16 || (doc)->ChipID == DOC_ChipID_DocMilPlus32)
+#define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil)
+#define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k)
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd);
+static void doc200x_select_chip(struct mtd_info *mtd, int chip);
+
+static int debug=0;
+module_param(debug, int, 0);
+
+static int try_dword=1;
+module_param(try_dword, int, 0);
+
+static int no_ecc_failures=0;
+module_param(no_ecc_failures, int, 0);
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int no_autopart=0;
+module_param(no_autopart, int, 0);
+#endif
+
+#ifdef MTD_NAND_DISKONCHIP_BBTWRITE
+static int inftl_bbt_write=1;
+#else
+static int inftl_bbt_write=0;
+#endif
+module_param(inftl_bbt_write, int, 0);
+
+static unsigned long doc_config_location = CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS;
+module_param(doc_config_location, ulong, 0);
+MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
+
+
+/* Sector size for HW ECC */
+#define SECTOR_SIZE 512
+/* The sector bytes are packed into NB_DATA 10 bit words */
+#define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / 10)
+/* Number of roots */
+#define NROOTS 4
+/* First consective root */
+#define FCR 510
+/* Number of symbols */
+#define NN 1023
+
+/* the Reed Solomon control structure */
+static struct rs_control *rs_decoder;
+
+/* 
+ * The HW decoder in the DoC ASIC's provides us a error syndrome,
+ * which we must convert to a standard syndrom usable by the generic
+ * Reed-Solomon library code.
+ *
+ * Fabrice Bellard figured this out in the old docecc code. I added
+ * some comments, improved a minor bit and converted it to make use
+ * of the generic Reed-Solomon libary. tglx
+ */
+static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
+{
+	int i, j, nerr, errpos[8];
+	uint8_t parity;
+	uint16_t ds[4], s[5], tmp, errval[8], syn[4];
+
+	/* Convert the ecc bytes into words */
+	ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8);
+	ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6);
+	ds[2] = ((ecc[2] & 0xf0) >> 4) | ((ecc[3] & 0x3f) << 4);
+	ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
+	parity = ecc[1];
+
+	/* Initialize the syndrom buffer */
+	for (i = 0; i < NROOTS; i++)
+		s[i] = ds[0];
+	/* 
+	 *  Evaluate 
+	 *  s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0]
+	 *  where x = alpha^(FCR + i)
+	 */
+	for(j = 1; j < NROOTS; j++) {
+		if(ds[j] == 0)
+			continue;
+		tmp = rs->index_of[ds[j]];
+		for(i = 0; i < NROOTS; i++)
+			s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
+	}
+
+	/* Calc s[i] = s[i] / alpha^(v + i) */
+	for (i = 0; i < NROOTS; i++) {
+		if (syn[i])
+ 			syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
+	}
+	/* Call the decoder library */
+	nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval);
+
+	/* Incorrectable errors ? */
+	if (nerr < 0)
+		return nerr;
+
+	/* 
+	 * Correct the errors. The bitpositions are a bit of magic,
+	 * but they are given by the design of the de/encoder circuit
+	 * in the DoC ASIC's.
+	 */
+	for(i = 0;i < nerr; i++) {
+		int index, bitpos, pos = 1015 - errpos[i];
+		uint8_t val;
+		if (pos >= NB_DATA && pos < 1019)
+			continue;
+		if (pos < NB_DATA) {
+			/* extract bit position (MSB first) */
+			pos = 10 * (NB_DATA - 1 - pos) - 6;
+			/* now correct the following 10 bits. At most two bytes
+			   can be modified since pos is even */
+			index = (pos >> 3) ^ 1;
+			bitpos = pos & 7;
+			if ((index >= 0 && index < SECTOR_SIZE) || 
+			    index == (SECTOR_SIZE + 1)) {
+				val = (uint8_t) (errval[i] >> (2 + bitpos));
+				parity ^= val;
+				if (index < SECTOR_SIZE)
+					data[index] ^= val;
+			}
+			index = ((pos >> 3) + 1) ^ 1;
+			bitpos = (bitpos + 10) & 7;
+			if (bitpos == 0)
+				bitpos = 8;
+			if ((index >= 0 && index < SECTOR_SIZE) || 
+			    index == (SECTOR_SIZE + 1)) {
+				val = (uint8_t)(errval[i] << (8 - bitpos));
+				parity ^= val;
+				if (index < SECTOR_SIZE)
+					data[index] ^= val;
+			}
+		}
+	}
+	/* If the parity is wrong, no rescue possible */
+	return parity ? -1 : nerr;
+}
+
+static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
+{
+	volatile char dummy;
+	int i;
+	
+	for (i = 0; i < cycles; i++) {
+		if (DoC_is_Millennium(doc))
+			dummy = ReadDOC(doc->virtadr, NOP);
+		else if (DoC_is_MillenniumPlus(doc))
+			dummy = ReadDOC(doc->virtadr, Mplus_NOP);
+		else
+			dummy = ReadDOC(doc->virtadr, DOCStatus);
+	}
+	
+}
+
+#define CDSN_CTRL_FR_B_MASK	(CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1)
+
+/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
+static int _DoC_WaitReady(struct doc_priv *doc)
+{
+        void __iomem *docptr = doc->virtadr;
+	unsigned long timeo = jiffies + (HZ * 10);
+
+	if(debug) printk("_DoC_WaitReady...\n");
+	/* Out-of-line routine to wait for chip response */
+	if (DoC_is_MillenniumPlus(doc)) {
+		while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
+			if (time_after(jiffies, timeo)) {
+				printk("_DoC_WaitReady timed out.\n");
+				return -EIO;
+			}
+			udelay(1);
+			cond_resched();
+		}
+	} else {
+		while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
+			if (time_after(jiffies, timeo)) {
+				printk("_DoC_WaitReady timed out.\n");
+				return -EIO;
+			}
+			udelay(1);
+			cond_resched();
+		}
+	}
+
+	return 0;
+}
+
+static inline int DoC_WaitReady(struct doc_priv *doc)
+{
+        void __iomem *docptr = doc->virtadr;
+	int ret = 0;
+
+	if (DoC_is_MillenniumPlus(doc)) {
+		DoC_Delay(doc, 4);
+
+		if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK)
+			/* Call the out-of-line routine to wait */
+			ret = _DoC_WaitReady(doc);
+	} else {
+		DoC_Delay(doc, 4);
+
+		if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
+			/* Call the out-of-line routine to wait */
+			ret = _DoC_WaitReady(doc);
+		DoC_Delay(doc, 2);
+	}
+
+	if(debug) printk("DoC_WaitReady OK\n");
+	return ret;
+}
+
+static void doc2000_write_byte(struct mtd_info *mtd, u_char datum)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	if(debug)printk("write_byte %02x\n", datum);
+	WriteDOC(datum, docptr, CDSNSlowIO);
+	WriteDOC(datum, docptr, 2k_CDSN_IO);
+}
+
+static u_char doc2000_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	u_char ret;
+
+	ReadDOC(docptr, CDSNSlowIO);
+	DoC_Delay(doc, 2);
+	ret = ReadDOC(docptr, 2k_CDSN_IO);
+	if (debug) printk("read_byte returns %02x\n", ret);
+	return ret;
+}
+
+static void doc2000_writebuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+	if (debug)printk("writebuf of %d bytes: ", len);
+	for (i=0; i < len; i++) {
+		WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i);
+		if (debug && i < 16)
+			printk("%02x ", buf[i]);
+	}
+	if (debug) printk("\n");
+}
+
+static void doc2000_readbuf(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+ 	int i;
+
+	if (debug)printk("readbuf of %d bytes: ", len);
+
+	for (i=0; i < len; i++) {
+		buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i);
+	}
+}
+
+static void doc2000_readbuf_dword(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+ 	int i;
+
+	if (debug) printk("readbuf_dword of %d bytes: ", len);
+
+	if (unlikely((((unsigned long)buf)|len) & 3)) {
+		for (i=0; i < len; i++) {
+			*(uint8_t *)(&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i);
+		}
+	} else {
+		for (i=0; i < len; i+=4) {
+			*(uint32_t*)(&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i);
+		}
+	}
+}
+
+static int doc2000_verifybuf(struct mtd_info *mtd, 
+			      const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	for (i=0; i < len; i++)
+		if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO))
+			return -EFAULT;
+	return 0;
+}
+
+static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	uint16_t ret;
+
+	doc200x_select_chip(mtd, nr);
+	doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
+	this->write_byte(mtd, NAND_CMD_READID);
+	doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
+	doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
+	this->write_byte(mtd, 0);
+	doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+
+	ret = this->read_byte(mtd) << 8;
+	ret |= this->read_byte(mtd);
+
+	if (doc->ChipID == DOC_ChipID_Doc2k && try_dword && !nr) {
+		/* First chip probe. See if we get same results by 32-bit access */
+		union {
+			uint32_t dword;
+			uint8_t byte[4];
+		} ident;
+		void __iomem *docptr = doc->virtadr;
+
+		doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
+		doc2000_write_byte(mtd, NAND_CMD_READID);
+		doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
+		doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
+		doc2000_write_byte(mtd, 0);
+		doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+
+		ident.dword = readl(docptr + DoC_2k_CDSN_IO);
+		if (((ident.byte[0] << 8) | ident.byte[1]) == ret) {
+			printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n");
+			this->read_buf = &doc2000_readbuf_dword;
+		}
+	}
+		
+	return ret;
+}
+
+static void __init doc2000_count_chips(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	uint16_t mfrid;
+	int i;
+
+	/* Max 4 chips per floor on DiskOnChip 2000 */
+	doc->chips_per_floor = 4;
+
+	/* Find out what the first chip is */
+	mfrid = doc200x_ident_chip(mtd, 0);
+
+	/* Find how many chips in each floor. */
+	for (i = 1; i < 4; i++) {
+		if (doc200x_ident_chip(mtd, i) != mfrid)
+			break;
+	}
+	doc->chips_per_floor = i;
+	printk(KERN_DEBUG "Detected %d chips per floor.\n", i);
+}
+
+static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+{
+	struct doc_priv *doc = this->priv;
+
+	int status;
+	
+	DoC_WaitReady(doc);
+	this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	DoC_WaitReady(doc);
+	status = (int)this->read_byte(mtd);
+
+	return status;
+}
+
+static void doc2001_write_byte(struct mtd_info *mtd, u_char datum)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	WriteDOC(datum, docptr, CDSNSlowIO);
+	WriteDOC(datum, docptr, Mil_CDSN_IO);
+	WriteDOC(datum, docptr, WritePipeTerm);
+}
+
+static u_char doc2001_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	//ReadDOC(docptr, CDSNSlowIO);
+	/* 11.4.5 -- delay twice to allow extended length cycle */
+	DoC_Delay(doc, 2);
+	ReadDOC(docptr, ReadPipeInit);
+	//return ReadDOC(docptr, Mil_CDSN_IO);
+	return ReadDOC(docptr, LastDataRead);
+}
+
+static void doc2001_writebuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	for (i=0; i < len; i++)
+		WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
+	/* Terminate write pipeline */
+	WriteDOC(0x00, docptr, WritePipeTerm);
+}
+
+static void doc2001_readbuf(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	/* Start read pipeline */
+	ReadDOC(docptr, ReadPipeInit);
+
+	for (i=0; i < len-1; i++)
+		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
+
+	/* Terminate read pipeline */
+	buf[i] = ReadDOC(docptr, LastDataRead);
+}
+
+static int doc2001_verifybuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	/* Start read pipeline */
+	ReadDOC(docptr, ReadPipeInit);
+
+	for (i=0; i < len-1; i++)
+		if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
+			ReadDOC(docptr, LastDataRead);
+			return i;
+		}
+	if (buf[i] != ReadDOC(docptr, LastDataRead))
+		return i;
+	return 0;
+}
+
+static u_char doc2001plus_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	u_char ret;
+
+        ReadDOC(docptr, Mplus_ReadPipeInit);
+        ReadDOC(docptr, Mplus_ReadPipeInit);
+        ret = ReadDOC(docptr, Mplus_LastDataRead);
+	if (debug) printk("read_byte returns %02x\n", ret);
+	return ret;
+}
+
+static void doc2001plus_writebuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (debug)printk("writebuf of %d bytes: ", len);
+	for (i=0; i < len; i++) {
+		WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
+		if (debug && i < 16)
+			printk("%02x ", buf[i]);
+	}
+	if (debug) printk("\n");
+}
+
+static void doc2001plus_readbuf(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (debug)printk("readbuf of %d bytes: ", len);
+
+	/* Start read pipeline */
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+
+	for (i=0; i < len-2; i++) {
+		buf[i] = ReadDOC(docptr, Mil_CDSN_IO);
+		if (debug && i < 16)
+			printk("%02x ", buf[i]);
+	}
+
+	/* Terminate read pipeline */
+	buf[len-2] = ReadDOC(docptr, Mplus_LastDataRead);
+	if (debug && i < 16)
+		printk("%02x ", buf[len-2]);
+	buf[len-1] = ReadDOC(docptr, Mplus_LastDataRead);
+	if (debug && i < 16)
+		printk("%02x ", buf[len-1]);
+	if (debug) printk("\n");
+}
+
+static int doc2001plus_verifybuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (debug)printk("verifybuf of %d bytes: ", len);
+
+	/* Start read pipeline */
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+
+	for (i=0; i < len-2; i++)
+		if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
+			ReadDOC(docptr, Mplus_LastDataRead);
+			ReadDOC(docptr, Mplus_LastDataRead);
+			return i;
+		}
+	if (buf[len-2] != ReadDOC(docptr, Mplus_LastDataRead))
+		return len-2;
+	if (buf[len-1] != ReadDOC(docptr, Mplus_LastDataRead))
+		return len-1;
+	return 0;
+}
+
+static void doc2001plus_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int floor = 0;
+
+	if(debug)printk("select chip (%d)\n", chip);
+
+	if (chip == -1) {
+		/* Disable flash internally */
+		WriteDOC(0, docptr, Mplus_FlashSelect);
+		return;
+	}
+
+	floor = chip / doc->chips_per_floor;
+	chip -= (floor *  doc->chips_per_floor);
+
+	/* Assert ChipEnable and deassert WriteProtect */
+	WriteDOC((DOC_FLASH_CE), docptr, Mplus_FlashSelect);
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	doc->curchip = chip;
+	doc->curfloor = floor;
+}
+
+static void doc200x_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int floor = 0;
+
+	if(debug)printk("select chip (%d)\n", chip);
+
+	if (chip == -1)
+		return;
+
+	floor = chip / doc->chips_per_floor;
+	chip -= (floor *  doc->chips_per_floor);
+
+	/* 11.4.4 -- deassert CE before changing chip */
+	doc200x_hwcontrol(mtd, NAND_CTL_CLRNCE);
+
+	WriteDOC(floor, docptr, FloorSelect);
+	WriteDOC(chip, docptr, CDSNDeviceSelect);
+
+	doc200x_hwcontrol(mtd, NAND_CTL_SETNCE);
+
+	doc->curchip = chip;
+	doc->curfloor = floor;
+}
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	switch(cmd) {
+	case NAND_CTL_SETNCE:
+		doc->CDSNControl |= CDSN_CTRL_CE;
+		break;
+	case NAND_CTL_CLRNCE:
+		doc->CDSNControl &= ~CDSN_CTRL_CE;
+		break;
+	case NAND_CTL_SETCLE:
+		doc->CDSNControl |= CDSN_CTRL_CLE;
+		break;
+	case NAND_CTL_CLRCLE:
+		doc->CDSNControl &= ~CDSN_CTRL_CLE;
+		break;
+	case NAND_CTL_SETALE:
+		doc->CDSNControl |= CDSN_CTRL_ALE;
+		break;
+	case NAND_CTL_CLRALE:
+		doc->CDSNControl &= ~CDSN_CTRL_ALE;
+		break;
+	case NAND_CTL_SETWP:
+		doc->CDSNControl |= CDSN_CTRL_WP;
+		break;
+	case NAND_CTL_CLRWP:
+		doc->CDSNControl &= ~CDSN_CTRL_WP;
+		break;
+	}
+	if (debug)printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl);
+	WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+	/* 11.4.3 -- 4 NOPs after CSDNControl write */
+	DoC_Delay(doc, 4);
+}
+
+static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	/*
+	 * Must terminate write pipeline before sending any commands
+	 * to the device.
+	 */
+	if (command == NAND_CMD_PAGEPROG) {
+		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+	}
+
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		WriteDOC(readcmd, docptr, Mplus_FlashCmd);
+	}
+	WriteDOC(command, docptr, Mplus_FlashCmd);
+	WriteDOC(0, docptr, Mplus_WritePipeTerm);
+	WriteDOC(0, docptr, Mplus_WritePipeTerm);
+
+	if (column != -1 || page_addr != -1) {
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (this->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			WriteDOC(column, docptr, Mplus_FlashAddress);
+		}
+		if (page_addr != -1) {
+			WriteDOC((unsigned char) (page_addr & 0xff), docptr, Mplus_FlashAddress);
+			WriteDOC((unsigned char) ((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
+			/* One more address cycle for higher density devices */
+			if (this->chipsize & 0x0c000000) {
+				WriteDOC((unsigned char) ((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
+				printk("high density\n");
+			}
+		}
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		/* deassert ALE */
+		if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || command == NAND_CMD_READOOB || command == NAND_CMD_READID)
+			WriteDOC(0, docptr, Mplus_FlashControl);
+	}
+
+	/* 
+	 * program and erase have their own busy handlers
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)
+			break;
+		udelay(this->chip_delay);
+		WriteDOC(NAND_CMD_STATUS, docptr, Mplus_FlashCmd);
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}
+	}
+
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+static int doc200x_dev_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	if (DoC_is_MillenniumPlus(doc)) {
+		/* 11.4.2 -- must NOP four times before checking FR/B# */
+		DoC_Delay(doc, 4);
+		if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
+			if(debug)
+				printk("not ready\n");
+			return 0;
+		}
+		if (debug)printk("was ready\n");
+		return 1;
+	} else {
+		/* 11.4.2 -- must NOP four times before checking FR/B# */
+		DoC_Delay(doc, 4);
+		if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
+			if(debug)
+				printk("not ready\n");
+			return 0;
+		}
+		/* 11.4.2 -- Must NOP twice if it's ready */
+		DoC_Delay(doc, 2);
+		if (debug)printk("was ready\n");
+		return 1;
+	}
+}
+
+static int doc200x_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+	/* This is our last resort if we couldn't find or create a BBT.  Just
+	   pretend all blocks are good. */
+	return 0;
+}
+
+static void doc200x_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	/* Prime the ECC engine */
+	switch(mode) {
+	case NAND_ECC_READ:
+		WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC(DOC_ECC_EN, docptr, ECCConf);
+		break;
+	case NAND_ECC_WRITE:
+		WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
+		break;
+	}
+}
+
+static void doc2001plus_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	/* Prime the ECC engine */
+	switch(mode) {
+	case NAND_ECC_READ:
+		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+		WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf);
+		break;
+	case NAND_ECC_WRITE:
+		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+		WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf);
+		break;
+	}
+}
+
+/* This code is only called on write */
+static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				 unsigned char *ecc_code)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+	int emptymatch = 1;
+
+	/* flush the pipeline */
+	if (DoC_is_2000(doc)) {
+		WriteDOC(doc->CDSNControl & ~CDSN_CTRL_FLASH_IO, docptr, CDSNControl);
+		WriteDOC(0, docptr, 2k_CDSN_IO);
+		WriteDOC(0, docptr, 2k_CDSN_IO);
+		WriteDOC(0, docptr, 2k_CDSN_IO);
+		WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+	} else if (DoC_is_MillenniumPlus(doc)) {
+		WriteDOC(0, docptr, Mplus_NOP);
+		WriteDOC(0, docptr, Mplus_NOP);
+		WriteDOC(0, docptr, Mplus_NOP);
+	} else {
+		WriteDOC(0, docptr, NOP);
+		WriteDOC(0, docptr, NOP);
+		WriteDOC(0, docptr, NOP);
+	}
+
+	for (i = 0; i < 6; i++) {
+		if (DoC_is_MillenniumPlus(doc))
+			ecc_code[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
+		else 
+			ecc_code[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
+		if (ecc_code[i] != empty_write_ecc[i])
+			emptymatch = 0;
+	}
+	if (DoC_is_MillenniumPlus(doc))
+		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
+	else
+		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+#if 0
+	/* If emptymatch=1, we might have an all-0xff data buffer.  Check. */
+	if (emptymatch) {
+		/* Note: this somewhat expensive test should not be triggered
+		   often.  It could be optimized away by examining the data in
+		   the writebuf routine, and remembering the result. */
+		for (i = 0; i < 512; i++) {
+			if (dat[i] == 0xff) continue;
+			emptymatch = 0;
+			break;
+		}
+	}
+	/* If emptymatch still =1, we do have an all-0xff data buffer.
+	   Return all-0xff ecc value instead of the computed one, so
+	   it'll look just like a freshly-erased page. */
+	if (emptymatch) memset(ecc_code, 0xff, 6);
+#endif
+	return 0;
+}
+
+static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+{
+	int i, ret = 0;
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	volatile u_char dummy;
+	int emptymatch = 1;
+	
+	/* flush the pipeline */
+	if (DoC_is_2000(doc)) {
+		dummy = ReadDOC(docptr, 2k_ECCStatus);
+		dummy = ReadDOC(docptr, 2k_ECCStatus);
+		dummy = ReadDOC(docptr, 2k_ECCStatus);
+	} else if (DoC_is_MillenniumPlus(doc)) {
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+	} else {
+		dummy = ReadDOC(docptr, ECCConf);
+		dummy = ReadDOC(docptr, ECCConf);
+		dummy = ReadDOC(docptr, ECCConf);
+	}
+	
+	/* Error occured ? */
+	if (dummy & 0x80) {
+		for (i = 0; i < 6; i++) {
+			if (DoC_is_MillenniumPlus(doc))
+				calc_ecc[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
+			else
+				calc_ecc[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
+			if (calc_ecc[i] != empty_read_syndrome[i])
+				emptymatch = 0;
+		}
+		/* If emptymatch=1, the read syndrome is consistent with an
+		   all-0xff data and stored ecc block.  Check the stored ecc. */
+		if (emptymatch) {
+			for (i = 0; i < 6; i++) {
+				if (read_ecc[i] == 0xff) continue;
+				emptymatch = 0;
+				break;
+			}
+		}
+		/* If emptymatch still =1, check the data block. */
+		if (emptymatch) {
+		/* Note: this somewhat expensive test should not be triggered
+		   often.  It could be optimized away by examining the data in
+		   the readbuf routine, and remembering the result. */
+			for (i = 0; i < 512; i++) {
+				if (dat[i] == 0xff) continue;
+				emptymatch = 0;
+				break;
+			}
+		}
+		/* If emptymatch still =1, this is almost certainly a freshly-
+		   erased block, in which case the ECC will not come out right.
+		   We'll suppress the error and tell the caller everything's
+		   OK.  Because it is. */
+		if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc);
+		if (ret > 0)
+			printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret);
+	}	
+	if (DoC_is_MillenniumPlus(doc))
+		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
+	else
+		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+	if (no_ecc_failures && (ret == -1)) {
+		printk(KERN_ERR "suppressing ECC failure\n");
+		ret = 0;
+	}
+	return ret;
+}
+		
+//u_char mydatabuf[528];
+
+static struct nand_oobinfo doc200x_oobinfo = {
+        .useecc = MTD_NANDECC_AUTOPLACE,
+        .eccbytes = 6,
+        .eccpos = {0, 1, 2, 3, 4, 5},
+        .oobfree = { {8, 8} }
+};
+ 
+/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
+   On sucessful return, buf will contain a copy of the media header for
+   further processing.  id is the string to scan for, and will presumably be
+   either "ANAND" or "BNAND".  If findmirror=1, also look for the mirror media
+   header.  The page #s of the found media headers are placed in mh0_page and
+   mh1_page in the DOC private structure. */
+static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
+				     const char *id, int findmirror)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	unsigned offs, end = (MAX_MEDIAHEADER_SCAN << this->phys_erase_shift);
+	int ret;
+	size_t retlen;
+
+	end = min(end, mtd->size); // paranoia
+	for (offs = 0; offs < end; offs += mtd->erasesize) {
+		ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
+		if (retlen != mtd->oobblock) continue;
+		if (ret) {
+			printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n",
+				offs);
+		}
+		if (memcmp(buf, id, 6)) continue;
+		printk(KERN_INFO "Found DiskOnChip %s Media Header at 0x%x\n", id, offs);
+		if (doc->mh0_page == -1) {
+			doc->mh0_page = offs >> this->page_shift;
+			if (!findmirror) return 1;
+			continue;
+		}
+		doc->mh1_page = offs >> this->page_shift;
+		return 2;
+	}
+	if (doc->mh0_page == -1) {
+		printk(KERN_WARNING "DiskOnChip %s Media Header not found.\n", id);
+		return 0;
+	}
+	/* Only one mediaheader was found.  We want buf to contain a
+	   mediaheader on return, so we'll have to re-read the one we found. */
+	offs = doc->mh0_page << this->page_shift;
+	ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
+	if (retlen != mtd->oobblock) {
+		/* Insanity.  Give up. */
+		printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n");
+		return 0;
+	}
+	return 1;
+}
+
+static inline int __init nftl_partscan(struct mtd_info *mtd,
+				struct mtd_partition *parts)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	int ret = 0;
+	u_char *buf;
+	struct NFTLMediaHeader *mh;
+	const unsigned psize = 1 << this->page_shift;
+	unsigned blocks, maxblocks;
+	int offs, numheaders;
+
+	buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
+		return 0;
+	}
+	if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out;
+	mh = (struct NFTLMediaHeader *) buf;
+
+//#ifdef CONFIG_MTD_DEBUG_VERBOSE
+//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+	printk(KERN_INFO "    DataOrgID        = %s\n"
+			 "    NumEraseUnits    = %d\n"
+			 "    FirstPhysicalEUN = %d\n"
+			 "    FormattedSize    = %d\n"
+			 "    UnitSizeFactor   = %d\n",
+		mh->DataOrgID, mh->NumEraseUnits,
+		mh->FirstPhysicalEUN, mh->FormattedSize,
+		mh->UnitSizeFactor);
+//#endif
+
+	blocks = mtd->size >> this->phys_erase_shift;
+	maxblocks = min(32768U, mtd->erasesize - psize);
+
+	if (mh->UnitSizeFactor == 0x00) {
+		/* Auto-determine UnitSizeFactor.  The constraints are:
+		   - There can be at most 32768 virtual blocks.
+		   - There can be at most (virtual block size - page size)
+		     virtual blocks (because MediaHeader+BBT must fit in 1).
+		*/
+		mh->UnitSizeFactor = 0xff;
+		while (blocks > maxblocks) {
+			blocks >>= 1;
+			maxblocks = min(32768U, (maxblocks << 1) + psize);
+			mh->UnitSizeFactor--;
+		}
+		printk(KERN_WARNING "UnitSizeFactor=0x00 detected.  Correct value is assumed to be 0x%02x.\n", mh->UnitSizeFactor);
+	}
+
+	/* NOTE: The lines below modify internal variables of the NAND and MTD
+	   layers; variables with have already been configured by nand_scan.
+	   Unfortunately, we didn't know before this point what these values
+	   should be.  Thus, this code is somewhat dependant on the exact
+	   implementation of the NAND layer.  */
+	if (mh->UnitSizeFactor != 0xff) {
+		this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
+		mtd->erasesize <<= (0xff - mh->UnitSizeFactor);
+		printk(KERN_INFO "Setting virtual erase size to %d\n", mtd->erasesize);
+		blocks = mtd->size >> this->bbt_erase_shift;
+		maxblocks = min(32768U, mtd->erasesize - psize);
+	}
+
+	if (blocks > maxblocks) {
+		printk(KERN_ERR "UnitSizeFactor of 0x%02x is inconsistent with device size.  Aborting.\n", mh->UnitSizeFactor);
+		goto out;
+	}
+
+	/* Skip past the media headers. */
+	offs = max(doc->mh0_page, doc->mh1_page);
+	offs <<= this->page_shift;
+	offs += mtd->erasesize;
+
+	//parts[0].name = " DiskOnChip Boot / Media Header partition";
+	//parts[0].offset = 0;
+	//parts[0].size = offs;
+
+	parts[0].name = " DiskOnChip BDTL partition";
+	parts[0].offset = offs;
+	parts[0].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift;
+
+	offs += parts[0].size;
+	if (offs < mtd->size) {
+		parts[1].name = " DiskOnChip Remainder partition";
+		parts[1].offset = offs;
+		parts[1].size = mtd->size - offs;
+		ret = 2;
+		goto out;
+	}
+	ret = 1;
+out:
+	kfree(buf);
+	return ret;
+}
+
+/* This is a stripped-down copy of the code in inftlmount.c */
+static inline int __init inftl_partscan(struct mtd_info *mtd,
+				 struct mtd_partition *parts)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	int ret = 0;
+	u_char *buf;
+	struct INFTLMediaHeader *mh;
+	struct INFTLPartition *ip;
+	int numparts = 0;
+	int blocks;
+	int vshift, lastvunit = 0;
+	int i;
+	int end = mtd->size;
+
+	if (inftl_bbt_write)
+		end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift);
+
+	buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
+		return 0;
+	}
+
+	if (!find_media_headers(mtd, buf, "BNAND", 0)) goto out;
+	doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
+	mh = (struct INFTLMediaHeader *) buf;
+
+	mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
+	mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
+	mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
+	mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
+	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
+	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+ 
+//#ifdef CONFIG_MTD_DEBUG_VERBOSE
+//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+	printk(KERN_INFO "    bootRecordID          = %s\n"
+			 "    NoOfBootImageBlocks   = %d\n"
+			 "    NoOfBinaryPartitions  = %d\n"
+			 "    NoOfBDTLPartitions    = %d\n"
+			 "    BlockMultiplerBits    = %d\n"
+			 "    FormatFlgs            = %d\n"
+			 "    OsakVersion           = %d.%d.%d.%d\n"
+			 "    PercentUsed           = %d\n",
+		mh->bootRecordID, mh->NoOfBootImageBlocks,
+		mh->NoOfBinaryPartitions,
+		mh->NoOfBDTLPartitions,
+		mh->BlockMultiplierBits, mh->FormatFlags,
+		((unsigned char *) &mh->OsakVersion)[0] & 0xf,
+		((unsigned char *) &mh->OsakVersion)[1] & 0xf,
+		((unsigned char *) &mh->OsakVersion)[2] & 0xf,
+		((unsigned char *) &mh->OsakVersion)[3] & 0xf,
+		mh->PercentUsed);
+//#endif
+
+	vshift = this->phys_erase_shift + mh->BlockMultiplierBits;
+
+	blocks = mtd->size >> vshift;
+	if (blocks > 32768) {
+		printk(KERN_ERR "BlockMultiplierBits=%d is inconsistent with device size.  Aborting.\n", mh->BlockMultiplierBits);
+		goto out;
+	}
+
+	blocks = doc->chips_per_floor << (this->chip_shift - this->phys_erase_shift);
+	if (inftl_bbt_write && (blocks > mtd->erasesize)) {
+		printk(KERN_ERR "Writeable BBTs spanning more than one erase block are not yet supported.  FIX ME!\n");
+		goto out;
+	}
+
+	/* Scan the partitions */
+	for (i = 0; (i < 4); i++) {
+		ip = &(mh->Partitions[i]);
+		ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
+		ip->firstUnit = le32_to_cpu(ip->firstUnit);
+		ip->lastUnit = le32_to_cpu(ip->lastUnit);
+		ip->flags = le32_to_cpu(ip->flags);
+		ip->spareUnits = le32_to_cpu(ip->spareUnits);
+		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+
+//#ifdef CONFIG_MTD_DEBUG_VERBOSE
+//		if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+		printk(KERN_INFO	"    PARTITION[%d] ->\n"
+			"        virtualUnits    = %d\n"
+			"        firstUnit       = %d\n"
+			"        lastUnit        = %d\n"
+			"        flags           = 0x%x\n"
+			"        spareUnits      = %d\n",
+			i, ip->virtualUnits, ip->firstUnit,
+			ip->lastUnit, ip->flags,
+			ip->spareUnits);
+//#endif
+
+/*
+		if ((i == 0) && (ip->firstUnit > 0)) {
+			parts[0].name = " DiskOnChip IPL / Media Header partition";
+			parts[0].offset = 0;
+			parts[0].size = mtd->erasesize * ip->firstUnit;
+			numparts = 1;
+		}
+*/
+
+		if (ip->flags & INFTL_BINARY)
+			parts[numparts].name = " DiskOnChip BDK partition";
+		else
+			parts[numparts].name = " DiskOnChip BDTL partition";
+		parts[numparts].offset = ip->firstUnit << vshift;
+		parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift;
+		numparts++;
+		if (ip->lastUnit > lastvunit) lastvunit = ip->lastUnit;
+		if (ip->flags & INFTL_LAST) break;
+	}
+	lastvunit++;
+	if ((lastvunit << vshift) < end) {
+		parts[numparts].name = " DiskOnChip Remainder partition";
+		parts[numparts].offset = lastvunit << vshift;
+		parts[numparts].size = end - parts[numparts].offset;
+		numparts++;
+	}
+	ret = numparts;
+out:
+	kfree(buf);
+	return ret;
+}
+
+static int __init nftl_scan_bbt(struct mtd_info *mtd)
+{
+	int ret, numparts;
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	struct mtd_partition parts[2];
+
+	memset((char *) parts, 0, sizeof(parts));
+	/* On NFTL, we have to find the media headers before we can read the
+	   BBTs, since they're stored in the media header eraseblocks. */
+	numparts = nftl_partscan(mtd, parts);
+	if (!numparts) return -EIO;
+	this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
+				NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
+				NAND_BBT_VERSION;
+	this->bbt_td->veroffs = 7;
+	this->bbt_td->pages[0] = doc->mh0_page + 1;
+	if (doc->mh1_page != -1) {
+		this->bbt_md->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
+					NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
+					NAND_BBT_VERSION;
+		this->bbt_md->veroffs = 7;
+		this->bbt_md->pages[0] = doc->mh1_page + 1;
+	} else {
+		this->bbt_md = NULL;
+	}
+
+	/* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set.
+	   At least as nand_bbt.c is currently written. */
+	if ((ret = nand_scan_bbt(mtd, NULL)))
+		return ret;
+	add_mtd_device(mtd);
+#ifdef CONFIG_MTD_PARTITIONS
+	if (!no_autopart)
+		add_mtd_partitions(mtd, parts, numparts);
+#endif
+	return 0;
+}
+
+static int __init inftl_scan_bbt(struct mtd_info *mtd)
+{
+	int ret, numparts;
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	struct mtd_partition parts[5];
+
+	if (this->numchips > doc->chips_per_floor) {
+		printk(KERN_ERR "Multi-floor INFTL devices not yet supported.\n");
+		return -EIO;
+	}
+
+	if (DoC_is_MillenniumPlus(doc)) {
+		this->bbt_td->options = NAND_BBT_2BIT | NAND_BBT_ABSPAGE;
+		if (inftl_bbt_write)
+			this->bbt_td->options |= NAND_BBT_WRITE;
+		this->bbt_td->pages[0] = 2;
+		this->bbt_md = NULL;
+	} else {
+		this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
+					NAND_BBT_VERSION;
+		if (inftl_bbt_write)
+			this->bbt_td->options |= NAND_BBT_WRITE;
+		this->bbt_td->offs = 8;
+		this->bbt_td->len = 8;
+		this->bbt_td->veroffs = 7;
+		this->bbt_td->maxblocks = INFTL_BBT_RESERVED_BLOCKS;
+		this->bbt_td->reserved_block_code = 0x01;
+		this->bbt_td->pattern = "MSYS_BBT";
+
+		this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
+					NAND_BBT_VERSION;
+		if (inftl_bbt_write)
+			this->bbt_md->options |= NAND_BBT_WRITE;
+		this->bbt_md->offs = 8;
+		this->bbt_md->len = 8;
+		this->bbt_md->veroffs = 7;
+		this->bbt_md->maxblocks = INFTL_BBT_RESERVED_BLOCKS;
+		this->bbt_md->reserved_block_code = 0x01;
+		this->bbt_md->pattern = "TBB_SYSM";
+	}
+
+	/* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set.
+	   At least as nand_bbt.c is currently written. */
+	if ((ret = nand_scan_bbt(mtd, NULL)))
+		return ret;
+	memset((char *) parts, 0, sizeof(parts));
+	numparts = inftl_partscan(mtd, parts);
+	/* At least for now, require the INFTL Media Header.  We could probably
+	   do without it for non-INFTL use, since all it gives us is
+	   autopartitioning, but I want to give it more thought. */
+	if (!numparts) return -EIO;
+	add_mtd_device(mtd);
+#ifdef CONFIG_MTD_PARTITIONS
+	if (!no_autopart)
+		add_mtd_partitions(mtd, parts, numparts);
+#endif
+	return 0;
+}
+
+static inline int __init doc2000_init(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+
+	this->write_byte = doc2000_write_byte;
+	this->read_byte = doc2000_read_byte;
+	this->write_buf = doc2000_writebuf;
+	this->read_buf = doc2000_readbuf;
+	this->verify_buf = doc2000_verifybuf;
+	this->scan_bbt = nftl_scan_bbt;
+
+	doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO;
+	doc2000_count_chips(mtd);
+	mtd->name = "DiskOnChip 2000 (NFTL Model)";
+	return (4 * doc->chips_per_floor);
+}
+
+static inline int __init doc2001_init(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+
+	this->write_byte = doc2001_write_byte;
+	this->read_byte = doc2001_read_byte;
+	this->write_buf = doc2001_writebuf;
+	this->read_buf = doc2001_readbuf;
+	this->verify_buf = doc2001_verifybuf;
+
+	ReadDOC(doc->virtadr, ChipID);
+	ReadDOC(doc->virtadr, ChipID);
+	ReadDOC(doc->virtadr, ChipID);
+	if (ReadDOC(doc->virtadr, ChipID) != DOC_ChipID_DocMil) {
+		/* It's not a Millennium; it's one of the newer
+		   DiskOnChip 2000 units with a similar ASIC. 
+		   Treat it like a Millennium, except that it
+		   can have multiple chips. */
+		doc2000_count_chips(mtd);
+		mtd->name = "DiskOnChip 2000 (INFTL Model)";
+		this->scan_bbt = inftl_scan_bbt;
+		return (4 * doc->chips_per_floor);
+	} else {
+		/* Bog-standard Millennium */
+		doc->chips_per_floor = 1;
+		mtd->name = "DiskOnChip Millennium";
+		this->scan_bbt = nftl_scan_bbt;
+		return 1;
+	}
+}
+
+static inline int __init doc2001plus_init(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+
+	this->write_byte = NULL;
+	this->read_byte = doc2001plus_read_byte;
+	this->write_buf = doc2001plus_writebuf;
+	this->read_buf = doc2001plus_readbuf;
+	this->verify_buf = doc2001plus_verifybuf;
+	this->scan_bbt = inftl_scan_bbt;
+	this->hwcontrol = NULL;
+	this->select_chip = doc2001plus_select_chip;
+	this->cmdfunc = doc2001plus_command;
+	this->enable_hwecc = doc2001plus_enable_hwecc;
+
+	doc->chips_per_floor = 1;
+	mtd->name = "DiskOnChip Millennium Plus";
+
+	return 1;
+}
+
+static inline int __init doc_probe(unsigned long physadr)
+{
+	unsigned char ChipID;
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	struct doc_priv *doc;
+	void __iomem *virtadr;
+	unsigned char save_control;
+	unsigned char tmp, tmpb, tmpc;
+	int reg, len, numchips;
+	int ret = 0;
+
+	virtadr = ioremap(physadr, DOC_IOREMAP_LEN);
+	if (!virtadr) {
+		printk(KERN_ERR "Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", DOC_IOREMAP_LEN, physadr);
+		return -EIO;
+	}
+
+	/* It's not possible to cleanly detect the DiskOnChip - the
+	 * bootup procedure will put the device into reset mode, and
+	 * it's not possible to talk to it without actually writing
+	 * to the DOCControl register. So we store the current contents
+	 * of the DOCControl register's location, in case we later decide
+	 * that it's not a DiskOnChip, and want to put it back how we
+	 * found it. 
+	 */
+	save_control = ReadDOC(virtadr, DOCControl);
+
+	/* Reset the DiskOnChip ASIC */
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+		 virtadr, DOCControl);
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+		 virtadr, DOCControl);
+
+	/* Enable the DiskOnChip ASIC */
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+		 virtadr, DOCControl);
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+		 virtadr, DOCControl);
+
+	ChipID = ReadDOC(virtadr, ChipID);
+
+	switch(ChipID) {
+	case DOC_ChipID_Doc2k:
+		reg = DoC_2k_ECCStatus;
+		break;
+	case DOC_ChipID_DocMil:
+		reg = DoC_ECCConf;
+		break;
+	case DOC_ChipID_DocMilPlus16:
+	case DOC_ChipID_DocMilPlus32:
+	case 0:
+		/* Possible Millennium Plus, need to do more checks */
+		/* Possibly release from power down mode */
+		for (tmp = 0; (tmp < 4); tmp++)
+			ReadDOC(virtadr, Mplus_Power);
+
+		/* Reset the Millennium Plus ASIC */
+		tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
+			DOC_MODE_BDECT;
+		WriteDOC(tmp, virtadr, Mplus_DOCControl);
+		WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
+
+		mdelay(1);
+		/* Enable the Millennium Plus ASIC */
+		tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
+			DOC_MODE_BDECT;
+		WriteDOC(tmp, virtadr, Mplus_DOCControl);
+		WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
+		mdelay(1);
+
+		ChipID = ReadDOC(virtadr, ChipID);
+
+		switch (ChipID) {
+		case DOC_ChipID_DocMilPlus16:
+			reg = DoC_Mplus_Toggle;
+			break;
+		case DOC_ChipID_DocMilPlus32:
+			printk(KERN_ERR "DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n");
+		default:
+			ret = -ENODEV;
+			goto notfound;
+		}
+		break;
+
+	default:
+		ret = -ENODEV;
+		goto notfound;
+	}
+	/* Check the TOGGLE bit in the ECC register */
+	tmp  = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+	tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+	tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+	if ((tmp == tmpb) || (tmp != tmpc)) {
+		printk(KERN_WARNING "Possible DiskOnChip at 0x%lx failed TOGGLE test, dropping.\n", physadr);
+		ret = -ENODEV;
+		goto notfound;
+	}
+
+	for (mtd = doclist; mtd; mtd = doc->nextdoc) {
+		unsigned char oldval;
+		unsigned char newval;
+		nand = mtd->priv;
+		doc = nand->priv;
+		/* Use the alias resolution register to determine if this is
+		   in fact the same DOC aliased to a new address.  If writes
+		   to one chip's alias resolution register change the value on
+		   the other chip, they're the same chip. */
+		if (ChipID == DOC_ChipID_DocMilPlus16) {
+			oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
+			newval = ReadDOC(virtadr, Mplus_AliasResolution);
+		} else {
+			oldval = ReadDOC(doc->virtadr, AliasResolution);
+			newval = ReadDOC(virtadr, AliasResolution);
+		}
+		if (oldval != newval)
+			continue;
+		if (ChipID == DOC_ChipID_DocMilPlus16) {
+			WriteDOC(~newval, virtadr, Mplus_AliasResolution);
+			oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
+			WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it
+		} else {
+			WriteDOC(~newval, virtadr, AliasResolution);
+			oldval = ReadDOC(doc->virtadr, AliasResolution);
+			WriteDOC(newval, virtadr, AliasResolution); // restore it
+		}
+		newval = ~newval;
+		if (oldval == newval) {
+			printk(KERN_DEBUG "Found alias of DOC at 0x%lx to 0x%lx\n", doc->physadr, physadr);
+			goto notfound;
+		}
+	}
+
+	printk(KERN_NOTICE "DiskOnChip found at 0x%lx\n", physadr);
+
+	len = sizeof(struct mtd_info) +
+	      sizeof(struct nand_chip) +
+	      sizeof(struct doc_priv) +
+	      (2 * sizeof(struct nand_bbt_descr));
+	mtd =  kmalloc(len, GFP_KERNEL);
+	if (!mtd) {
+		printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len);
+		ret = -ENOMEM;
+		goto fail;
+	}
+	memset(mtd, 0, len);
+
+	nand			= (struct nand_chip *) (mtd + 1);
+	doc			= (struct doc_priv *) (nand + 1);
+	nand->bbt_td		= (struct nand_bbt_descr *) (doc + 1);
+	nand->bbt_md		= nand->bbt_td + 1;
+
+	mtd->priv		= nand;
+	mtd->owner		= THIS_MODULE;
+
+	nand->priv		= doc;
+	nand->select_chip	= doc200x_select_chip;
+	nand->hwcontrol		= doc200x_hwcontrol;
+	nand->dev_ready		= doc200x_dev_ready;
+	nand->waitfunc		= doc200x_wait;
+	nand->block_bad		= doc200x_block_bad;
+	nand->enable_hwecc	= doc200x_enable_hwecc;
+	nand->calculate_ecc	= doc200x_calculate_ecc;
+	nand->correct_data	= doc200x_correct_data;
+
+	nand->autooob		= &doc200x_oobinfo;
+	nand->eccmode		= NAND_ECC_HW6_512;
+	nand->options		= NAND_USE_FLASH_BBT | NAND_HWECC_SYNDROME;
+
+	doc->physadr		= physadr;
+	doc->virtadr		= virtadr;
+	doc->ChipID		= ChipID;
+	doc->curfloor		= -1;
+	doc->curchip		= -1;
+	doc->mh0_page		= -1;
+	doc->mh1_page		= -1;
+	doc->nextdoc		= doclist;
+
+	if (ChipID == DOC_ChipID_Doc2k)
+		numchips = doc2000_init(mtd);
+	else if (ChipID == DOC_ChipID_DocMilPlus16)
+		numchips = doc2001plus_init(mtd);
+	else
+		numchips = doc2001_init(mtd);
+
+	if ((ret = nand_scan(mtd, numchips))) {
+		/* DBB note: i believe nand_release is necessary here, as
+		   buffers may have been allocated in nand_base.  Check with
+		   Thomas. FIX ME! */
+		/* nand_release will call del_mtd_device, but we haven't yet
+		   added it.  This is handled without incident by
+		   del_mtd_device, as far as I can tell. */
+		nand_release(mtd);
+		kfree(mtd);
+		goto fail;
+	}
+
+	/* Success! */
+	doclist = mtd;
+	return 0;
+
+notfound:
+	/* Put back the contents of the DOCControl register, in case it's not
+	   actually a DiskOnChip.  */
+	WriteDOC(save_control, virtadr, DOCControl);
+fail:
+	iounmap(virtadr);
+	return ret;
+}
+
+static void release_nanddoc(void)
+{
+ 	struct mtd_info *mtd, *nextmtd;
+	struct nand_chip *nand;
+	struct doc_priv *doc;
+
+	for (mtd = doclist; mtd; mtd = nextmtd) {
+		nand = mtd->priv;
+		doc = nand->priv;
+
+		nextmtd = doc->nextdoc;
+		nand_release(mtd);
+		iounmap(doc->virtadr);
+		kfree(mtd);
+	}
+}
+
+static int __init init_nanddoc(void)
+{
+	int i, ret = 0;
+
+	/* We could create the decoder on demand, if memory is a concern.
+	 * This way we have it handy, if an error happens 
+	 *
+	 * Symbolsize is 10 (bits)
+	 * Primitve polynomial is x^10+x^3+1
+	 * first consecutive root is 510
+	 * primitve element to generate roots = 1
+	 * generator polinomial degree = 4
+	 */
+	rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS);
+ 	if (!rs_decoder) {
+		printk (KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
+		return -ENOMEM;
+	}
+
+	if (doc_config_location) {
+		printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location);
+		ret = doc_probe(doc_config_location);
+		if (ret < 0)
+			goto outerr;
+	} else {
+		for (i=0; (doc_locations[i] != 0xffffffff); i++) {
+			doc_probe(doc_locations[i]);
+		}
+	}
+	/* No banner message any more. Print a message if no DiskOnChip
+	   found, so the user knows we at least tried. */
+	if (!doclist) {
+		printk(KERN_INFO "No valid DiskOnChip devices found\n");
+		ret = -ENODEV;
+		goto outerr;
+	}
+	return 0;
+outerr:
+	free_rs(rs_decoder);
+	return ret;
+}
+
+static void __exit cleanup_nanddoc(void)
+{
+	/* Cleanup the nand/DoC resources */
+	release_nanddoc();
+
+	/* Free the reed solomon resources */
+	if (rs_decoder) {
+		free_rs(rs_decoder);
+	}
+}
+
+module_init(init_nanddoc);
+module_exit(cleanup_nanddoc);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("M-Systems DiskOnChip 2000, Millennium and Millennium Plus device driver\n");
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
new file mode 100644
index 000000000000..5549681ccdce
--- /dev/null
+++ b/drivers/mtd/nand/edb7312.c
@@ -0,0 +1,218 @@
+/*
+ *  drivers/mtd/nand/edb7312.c
+ *
+ *  Copyright (C) 2002 Marius Gr�ger (mag@sysgo.de)
+ *
+ *  Derived from drivers/mtd/nand/autcpu12.c
+ *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * $Id: edb7312.c,v 1.11 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device found on the
+ *   CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
+ *   a 64Mibit (8MiB x 8 bits) NAND flash device.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <asm/sizes.h>
+#include <asm/hardware/clps7111.h>
+
+/*
+ * MTD structure for EDB7312 board
+ */
+static struct mtd_info *ep7312_mtd = NULL;
+
+/*
+ * Values specific to the EDB7312 board (used with EP7312 processor)
+ */
+#define EP7312_FIO_PBASE 0x10000000	/* Phys address of flash */
+#define EP7312_PXDR	0x0001	/*
+				 * IO offset to Port B data register
+				 * where the CLE, ALE and NCE pins
+				 * are wired to.
+				 */
+#define EP7312_PXDDR	0x0041	/*
+				 * IO offset to Port B data direction
+				 * register so we can control the IO
+				 * lines.
+				 */
+
+/*
+ * Module stuff
+ */
+
+static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
+static void __iomem * ep7312_pxdr = (void __iomem *) EP7312_PXDR;
+static void __iomem * ep7312_pxddr = (void __iomem *) EP7312_PXDDR;
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * Define static partitions for flash device
+ */
+static struct mtd_partition partition_info[] = {
+	{ .name = "EP7312 Nand Flash",
+		  .offset = 0,
+		  .size = 8*1024*1024 }
+};
+#define NUM_PARTITIONS 1
+
+#endif
+
+
+/* 
+ *	hardware specific access to control-lines
+ */
+static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd) 
+{
+	switch(cmd) {
+		
+	case NAND_CTL_SETCLE: 
+		clps_writeb(clps_readb(ep7312_pxdr) | 0x10, ep7312_pxdr); 
+		break;
+	case NAND_CTL_CLRCLE: 
+		clps_writeb(clps_readb(ep7312_pxdr) & ~0x10, ep7312_pxdr);
+		break;
+		
+	case NAND_CTL_SETALE:
+		clps_writeb(clps_readb(ep7312_pxdr) | 0x20, ep7312_pxdr);
+		break;
+	case NAND_CTL_CLRALE:
+		clps_writeb(clps_readb(ep7312_pxdr) & ~0x20, ep7312_pxdr);
+		break;
+		
+	case NAND_CTL_SETNCE:
+		clps_writeb((clps_readb(ep7312_pxdr) | 0x80) & ~0x40, ep7312_pxdr);
+		break;
+	case NAND_CTL_CLRNCE:
+		clps_writeb((clps_readb(ep7312_pxdr) | 0x80) | 0x40, ep7312_pxdr);
+		break;
+	}
+}
+
+/*
+ *	read device ready pin
+ */
+static int ep7312_device_ready(struct mtd_info *mtd)
+{
+	return 1;
+}
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*
+ * Main initialization routine
+ */
+static int __init ep7312_init (void)
+{
+	struct nand_chip *this;
+	const char *part_type = 0;
+	int mtd_parts_nb = 0;
+	struct mtd_partition *mtd_parts = 0;
+	void __iomem * ep7312_fio_base;
+	
+	/* Allocate memory for MTD device structure and private data */
+	ep7312_mtd = kmalloc(sizeof(struct mtd_info) + 
+			     sizeof(struct nand_chip),
+			     GFP_KERNEL);
+	if (!ep7312_mtd) {
+		printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+	
+	/* map physical adress */
+	ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
+	if(!ep7312_fio_base) {
+		printk("ioremap EDB7312 NAND flash failed\n");
+		kfree(ep7312_mtd);
+		return -EIO;
+	}
+	
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&ep7312_mtd[1]);
+	
+	/* Initialize structures */
+	memset((char *) ep7312_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+	
+	/* Link the private data with the MTD structure */
+	ep7312_mtd->priv = this;
+	
+	/*
+	 * Set GPIO Port B control register so that the pins are configured
+	 * to be outputs for controlling the NAND flash.
+	 */
+	clps_writeb(0xf0, ep7312_pxddr);
+	
+	/* insert callbacks */
+	this->IO_ADDR_R = ep7312_fio_base;
+	this->IO_ADDR_W = ep7312_fio_base;
+	this->hwcontrol = ep7312_hwcontrol;
+	this->dev_ready = ep7312_device_ready;
+	/* 15 us command delay time */
+	this->chip_delay = 15;
+	
+	/* Scan to find existence of the device */
+	if (nand_scan (ep7312_mtd, 1)) {
+		iounmap((void *)ep7312_fio_base);
+		kfree (ep7312_mtd);
+		return -ENXIO;
+	}
+	
+#ifdef CONFIG_MTD_PARTITIONS
+	ep7312_mtd->name = "edb7312-nand";
+	mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes,
+					    &mtd_parts, 0);
+	if (mtd_parts_nb > 0)
+		part_type = "command line";
+	else
+		mtd_parts_nb = 0;
+#endif
+	if (mtd_parts_nb == 0) {
+		mtd_parts = partition_info;
+		mtd_parts_nb = NUM_PARTITIONS;
+		part_type = "static";
+	}
+	
+	/* Register the partitions */
+	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+	add_mtd_partitions(ep7312_mtd, mtd_parts, mtd_parts_nb);
+	
+	/* Return happy */
+	return 0;
+}
+module_init(ep7312_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit ep7312_cleanup (void)
+{
+	struct nand_chip *this = (struct nand_chip *) &ep7312_mtd[1];
+	
+	/* Release resources, unregister device */
+	nand_release (ap7312_mtd);
+	
+	/* Free internal data buffer */
+	kfree (this->data_buf);
+	
+	/* Free the MTD device structure */
+	kfree (ep7312_mtd);
+}
+module_exit(ep7312_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
+MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
new file mode 100644
index 000000000000..3825a7a0900c
--- /dev/null
+++ b/drivers/mtd/nand/h1910.c
@@ -0,0 +1,208 @@
+/*
+ *  drivers/mtd/nand/h1910.c
+ *
+ *  Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com)
+ *
+ *  Derived from drivers/mtd/nand/edb7312.c
+ *       Copyright (C) 2002 Marius Gr�ger (mag@sysgo.de)
+ *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * $Id: h1910.c,v 1.5 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device found on the
+ *   iPAQ h1910 board which utilizes the Samsung K9F2808 part. This is
+ *   a 128Mibit (16MiB x 8 bits) NAND flash device.
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <asm/sizes.h>
+#include <asm/arch/h1900-gpio.h>
+#include <asm/arch/ipaq.h>
+
+/*
+ * MTD structure for EDB7312 board
+ */
+static struct mtd_info *h1910_nand_mtd = NULL;
+
+/*
+ * Module stuff
+ */
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * Define static partitions for flash device
+ */
+static struct mtd_partition partition_info[] = {
+	{ name: "h1910 NAND Flash",
+		  offset: 0,
+		  size: 16*1024*1024 }
+};
+#define NUM_PARTITIONS 1
+
+#endif
+
+
+/* 
+ *	hardware specific access to control-lines
+ */
+static void h1910_hwcontrol(struct mtd_info *mtd, int cmd) 
+{
+	struct nand_chip* this = (struct nand_chip *) (mtd->priv);
+	
+	switch(cmd) {
+		
+	case NAND_CTL_SETCLE: 
+		this->IO_ADDR_R |= (1 << 2);
+		this->IO_ADDR_W |= (1 << 2);
+		break;
+	case NAND_CTL_CLRCLE: 
+		this->IO_ADDR_R &= ~(1 << 2);
+		this->IO_ADDR_W &= ~(1 << 2);
+		break;
+		
+	case NAND_CTL_SETALE:
+		this->IO_ADDR_R |= (1 << 3);
+		this->IO_ADDR_W |= (1 << 3);
+		break;
+	case NAND_CTL_CLRALE:
+		this->IO_ADDR_R &= ~(1 << 3);
+		this->IO_ADDR_W &= ~(1 << 3);
+		break;
+		
+	case NAND_CTL_SETNCE:
+		break;
+	case NAND_CTL_CLRNCE:
+		break;
+	}
+}
+
+/*
+ *	read device ready pin
+ */
+#if 0
+static int h1910_device_ready(struct mtd_info *mtd)
+{
+	return (GPLR(55) & GPIO_bit(55));
+}
+#endif
+
+/*
+ * Main initialization routine
+ */
+static int __init h1910_init (void)
+{
+	struct nand_chip *this;
+	const char *part_type = 0;
+	int mtd_parts_nb = 0;
+	struct mtd_partition *mtd_parts = 0;
+	void __iomem *nandaddr;
+	
+	if (!machine_is_h1900())
+		return -ENODEV;
+		
+	nandaddr = __ioremap(0x08000000, 0x1000, 0, 1);
+	if (!nandaddr) {
+		printk("Failed to ioremap nand flash.\n");
+		return -ENOMEM;
+	}
+	
+	/* Allocate memory for MTD device structure and private data */
+	h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + 
+			     sizeof(struct nand_chip),
+			     GFP_KERNEL);
+	if (!h1910_nand_mtd) {
+		printk("Unable to allocate h1910 NAND MTD device structure.\n");
+		iounmap ((void *) nandaddr);
+		return -ENOMEM;
+	}
+	
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&h1910_nand_mtd[1]);
+	
+	/* Initialize structures */
+	memset((char *) h1910_nand_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+	
+	/* Link the private data with the MTD structure */
+	h1910_nand_mtd->priv = this;
+	
+	/*
+	 * Enable VPEN
+	 */
+	GPSR(37) = GPIO_bit(37);
+	
+	/* insert callbacks */
+	this->IO_ADDR_R = nandaddr;
+	this->IO_ADDR_W = nandaddr;
+	this->hwcontrol = h1910_hwcontrol;
+	this->dev_ready = NULL;	/* unknown whether that was correct or not so we will just do it like this */
+	/* 15 us command delay time */
+	this->chip_delay = 50;
+	this->eccmode = NAND_ECC_SOFT;
+	this->options = NAND_NO_AUTOINCR;
+	
+	/* Scan to find existence of the device */
+	if (nand_scan (h1910_nand_mtd, 1)) {
+		printk(KERN_NOTICE "No NAND device - returning -ENXIO\n");
+		kfree (h1910_nand_mtd);
+		iounmap ((void *) nandaddr);
+		return -ENXIO;
+	}
+	
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, 
+						"h1910-nand");
+	if (mtd_parts_nb > 0)
+	  part_type = "command line";
+	else
+	  mtd_parts_nb = 0;
+#endif
+	if (mtd_parts_nb == 0)
+	{
+		mtd_parts = partition_info;
+		mtd_parts_nb = NUM_PARTITIONS;
+		part_type = "static";
+	}
+	
+	/* Register the partitions */
+	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+	add_mtd_partitions(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
+	
+	/* Return happy */
+	return 0;
+}
+module_init(h1910_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit h1910_cleanup (void)
+{
+	struct nand_chip *this = (struct nand_chip *) &h1910_nand_mtd[1];
+	
+	/* Release resources, unregister device */
+	nand_release (h1910_nand_mtd);
+
+	/* Release io resource */
+	iounmap ((void *) this->IO_ADDR_W);
+
+	/* Free the MTD device structure */
+	kfree (h1910_nand_mtd);
+}
+module_exit(h1910_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joshua Wise <joshua at joshuawise dot com>");
+MODULE_DESCRIPTION("NAND flash driver for iPAQ h1910");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
new file mode 100644
index 000000000000..44d5b128911f
--- /dev/null
+++ b/drivers/mtd/nand/nand_base.c
@@ -0,0 +1,2563 @@
+/*
+ *  drivers/mtd/nand.c
+ *
+ *  Overview:
+ *   This is the generic MTD driver for NAND flash devices. It should be
+ *   capable of working with almost all NAND chips currently available.
+ *   Basic support for AG-AND chips is provided.
+ *   
+ *	Additional technical information is available on
+ *	http://www.linux-mtd.infradead.org/tech/nand.html
+ *	
+ *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * 		  2002 Thomas Gleixner (tglx@linutronix.de)
+ *
+ *  02-08-2004  tglx: support for strange chips, which cannot auto increment 
+ *		pages on read / read_oob
+ *
+ *  03-17-2004  tglx: Check ready before auto increment check. Simon Bayes
+ *		pointed this out, as he marked an auto increment capable chip
+ *		as NOAUTOINCR in the board driver.
+ *		Make reads over block boundaries work too
+ *
+ *  04-14-2004	tglx: first working version for 2k page size chips
+ *  
+ *  05-19-2004  tglx: Basic support for Renesas AG-AND chips
+ *
+ *  09-24-2004  tglx: add support for hardware controllers (e.g. ECC) shared
+ *		among multiple independend devices. Suggestions and initial patch
+ *		from Ben Dooks <ben-mtd@fluff.org>
+ *
+ * Credits:
+ *	David Woodhouse for adding multichip support  
+ *	
+ *	Aleph One Ltd. and Toby Churchill Ltd. for supporting the
+ *	rework for 2K page size chips
+ *
+ * TODO:
+ *	Enable cached programming for 2k page size chips
+ *	Check, if mtd->ecctype should be set to MTD_ECC_HW
+ *	if we have HW ecc support.
+ *	The AG-AND chips have nice features for speed improvement,
+ *	which are not supported yet. Read / program 4 pages in one go.
+ *
+ * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
+/* Define default oob placement schemes for large and small page devices */
+static struct nand_oobinfo nand_oob_8 = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 3,
+	.eccpos = {0, 1, 2},
+	.oobfree = { {3, 2}, {6, 2} }
+};
+
+static struct nand_oobinfo nand_oob_16 = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 6,
+	.eccpos = {0, 1, 2, 3, 6, 7},
+	.oobfree = { {8, 8} }
+};
+
+static struct nand_oobinfo nand_oob_64 = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 24,
+	.eccpos = {
+		40, 41, 42, 43, 44, 45, 46, 47, 
+		48, 49, 50, 51, 52, 53, 54, 55, 
+		56, 57, 58, 59, 60, 61, 62, 63},
+	.oobfree = { {2, 38} }
+};
+
+/* This is used for padding purposes in nand_write_oob */
+static u_char ffchars[] = {
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+};
+
+/*
+ * NAND low-level MTD interface functions
+ */
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
+
+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
+			  size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
+			unsigned long count, loff_t to, size_t * retlen);
+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
+			unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr);
+static void nand_sync (struct mtd_info *mtd);
+
+/* Some internal functions */
+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,
+		struct nand_oobinfo *oobsel, int mode);
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, 
+	u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
+#else
+#define nand_verify_pages(...) (0)
+#endif
+		
+static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);
+
+/**
+ * nand_release_device - [GENERIC] release chip
+ * @mtd:	MTD device structure
+ * 
+ * Deselect, release chip lock and wake up anyone waiting on the device 
+ */
+static void nand_release_device (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* De-select the NAND device */
+	this->select_chip(mtd, -1);
+	/* Do we have a hardware controller ? */
+	if (this->controller) {
+		spin_lock(&this->controller->lock);
+		this->controller->active = NULL;
+		spin_unlock(&this->controller->lock);
+	}
+	/* Release the chip */
+	spin_lock (&this->chip_lock);
+	this->state = FL_READY;
+	wake_up (&this->wq);
+	spin_unlock (&this->chip_lock);
+}
+
+/**
+ * nand_read_byte - [DEFAULT] read one byte from the chip
+ * @mtd:	MTD device structure
+ *
+ * Default read function for 8bit buswith
+ */
+static u_char nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return readb(this->IO_ADDR_R);
+}
+
+/**
+ * nand_write_byte - [DEFAULT] write one byte to the chip
+ * @mtd:	MTD device structure
+ * @byte:	pointer to data byte to write
+ *
+ * Default write function for 8it buswith
+ */
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	writeb(byte, this->IO_ADDR_W);
+}
+
+/**
+ * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
+ * @mtd:	MTD device structure
+ *
+ * Default read function for 16bit buswith with 
+ * endianess conversion
+ */
+static u_char nand_read_byte16(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
+}
+
+/**
+ * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip
+ * @mtd:	MTD device structure
+ * @byte:	pointer to data byte to write
+ *
+ * Default write function for 16bit buswith with
+ * endianess conversion
+ */
+static void nand_write_byte16(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
+}
+
+/**
+ * nand_read_word - [DEFAULT] read one word from the chip
+ * @mtd:	MTD device structure
+ *
+ * Default read function for 16bit buswith without 
+ * endianess conversion
+ */
+static u16 nand_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return readw(this->IO_ADDR_R);
+}
+
+/**
+ * nand_write_word - [DEFAULT] write one word to the chip
+ * @mtd:	MTD device structure
+ * @word:	data word to write
+ *
+ * Default write function for 16bit buswith without 
+ * endianess conversion
+ */
+static void nand_write_word(struct mtd_info *mtd, u16 word)
+{
+	struct nand_chip *this = mtd->priv;
+	writew(word, this->IO_ADDR_W);
+}
+
+/**
+ * nand_select_chip - [DEFAULT] control CE line
+ * @mtd:	MTD device structure
+ * @chip:	chipnumber to select, -1 for deselect
+ *
+ * Default select function for 1 chip devices.
+ */
+static void nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	switch(chip) {
+	case -1:
+		this->hwcontrol(mtd, NAND_CTL_CLRNCE);	
+		break;
+	case 0:
+		this->hwcontrol(mtd, NAND_CTL_SETNCE);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+/**
+ * nand_write_buf - [DEFAULT] write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ *
+ * Default write function for 8bit buswith
+ */
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		writeb(buf[i], this->IO_ADDR_W);
+}
+
+/**
+ * nand_read_buf - [DEFAULT] read chip data into buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ *
+ * Default read function for 8bit buswith
+ */
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		buf[i] = readb(this->IO_ADDR_R);
+}
+
+/**
+ * nand_verify_buf - [DEFAULT] Verify chip data against buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to compare
+ * @len:	number of bytes to compare
+ *
+ * Default verify function for 8bit buswith
+ */
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		if (buf[i] != readb(this->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/**
+ * nand_write_buf16 - [DEFAULT] write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ *
+ * Default write function for 16bit buswith
+ */
+static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+	
+	for (i=0; i<len; i++)
+		writew(p[i], this->IO_ADDR_W);
+		
+}
+
+/**
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ *
+ * Default read function for 16bit buswith
+ */
+static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i=0; i<len; i++)
+		p[i] = readw(this->IO_ADDR_R);
+}
+
+/**
+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to compare
+ * @len:	number of bytes to compare
+ *
+ * Default verify function for 16bit buswith
+ */
+static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i=0; i<len; i++)
+		if (p[i] != readw(this->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/**
+ * nand_block_bad - [DEFAULT] Read bad block marker from the chip
+ * @mtd:	MTD device structure
+ * @ofs:	offset from device start
+ * @getchip:	0, if the chip is already selected
+ *
+ * Check, if the block is bad. 
+ */
+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+	int page, chipnr, res = 0;
+	struct nand_chip *this = mtd->priv;
+	u16 bad;
+
+	if (getchip) {
+		page = (int)(ofs >> this->page_shift);
+		chipnr = (int)(ofs >> this->chip_shift);
+
+		/* Grab the lock and see if the device is available */
+		nand_get_device (this, mtd, FL_READING);
+
+		/* Select the NAND device */
+		this->select_chip(mtd, chipnr);
+	} else 
+		page = (int) ofs;	
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
+		bad = cpu_to_le16(this->read_word(mtd));
+		if (this->badblockpos & 0x1)
+			bad >>= 1;
+		if ((bad & 0xFF) != 0xff)
+			res = 1;
+	} else {
+		this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);
+		if (this->read_byte(mtd) != 0xff)
+			res = 1;
+	}
+		
+	if (getchip) {
+		/* Deselect and wake up anyone waiting on the device */
+		nand_release_device(mtd);
+	}	
+	
+	return res;
+}
+
+/**
+ * nand_default_block_markbad - [DEFAULT] mark a block bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset from device start
+ *
+ * This is the default implementation, which can be overridden by
+ * a hardware specific driver.
+*/
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *this = mtd->priv;
+	u_char buf[2] = {0, 0};
+	size_t	retlen;
+	int block;
+	
+	/* Get block number */
+	block = ((int) ofs) >> this->bbt_erase_shift;
+	this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+	/* Do we have a flash based bad block table ? */
+	if (this->options & NAND_USE_FLASH_BBT)
+		return nand_update_bbt (mtd, ofs);
+		
+	/* We write two bytes, so we dont have to mess with 16 bit access */
+	ofs += mtd->oobsize + (this->badblockpos & ~0x01);
+	return nand_write_oob (mtd, ofs , 2, &retlen, buf);
+}
+
+/** 
+ * nand_check_wp - [GENERIC] check if the chip is write protected
+ * @mtd:	MTD device structure
+ * Check, if the device is write protected 
+ *
+ * The function expects, that the device is already selected 
+ */
+static int nand_check_wp (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	/* Check the WP bit */
+	this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
+	return (this->read_byte(mtd) & 0x80) ? 0 : 1; 
+}
+
+/**
+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset from device start
+ * @getchip:	0, if the chip is already selected
+ * @allowbbt:	1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad. Either by reading the bad block table or
+ * calling of the scan function.
+ */
+static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+{
+	struct nand_chip *this = mtd->priv;
+	
+	if (!this->bbt)
+		return this->block_bad(mtd, ofs, getchip);
+	
+	/* Return info from the table */
+	return nand_isbad_bbt (mtd, ofs, allowbbt);
+}
+
+/**
+ * nand_command - [DEFAULT] Send command to NAND device
+ * @mtd:	MTD device structure
+ * @command:	the command to be sent
+ * @column:	the column address for this command, -1 if none
+ * @page_addr:	the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This function is used for small page
+ * devices (256/512 Bytes per page)
+ */
+static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/* Begin command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_SETCLE);
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		this->write_byte(mtd, readcmd);
+	}
+	this->write_byte(mtd, command);
+
+	/* Set ALE and clear CLE to start address cycle */
+	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+	if (column != -1 || page_addr != -1) {
+		this->hwcontrol(mtd, NAND_CTL_SETALE);
+
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (this->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			this->write_byte(mtd, column);
+		}
+		if (page_addr != -1) {
+			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
+			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+			/* One more address cycle for devices > 32MiB */
+			if (this->chipsize > (32 << 20))
+				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
+		}
+		/* Latch in address */
+		this->hwcontrol(mtd, NAND_CTL_CLRALE);
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		udelay(this->chip_delay);
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		this->write_byte(mtd, NAND_CMD_STATUS);
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+/**
+ * nand_command_lp - [DEFAULT] Send command to NAND large page device
+ * @mtd:	MTD device structure
+ * @command:	the command to be sent
+ * @column:	the column address for this command, -1 if none
+ * @page_addr:	the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This is the version for the new large page devices
+ * We dont have the seperate regions as we have in the small page devices.
+ * We must emulate NAND_CMD_READOOB to keep the code compatible.
+ *
+ */
+static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/* Emulate NAND_CMD_READOOB */
+	if (command == NAND_CMD_READOOB) {
+		column += mtd->oobblock;
+		command = NAND_CMD_READ0;
+	}
+	
+		
+	/* Begin command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_SETCLE);
+	/* Write out the command to the device. */
+	this->write_byte(mtd, command);
+	/* End command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+	if (column != -1 || page_addr != -1) {
+		this->hwcontrol(mtd, NAND_CTL_SETALE);
+
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (this->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			this->write_byte(mtd, column & 0xff);
+			this->write_byte(mtd, column >> 8);
+		}	
+		if (page_addr != -1) {
+			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
+			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+			/* One more address cycle for devices > 128MiB */
+			if (this->chipsize > (128 << 20))
+				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff));
+		}
+		/* Latch in address */
+		this->hwcontrol(mtd, NAND_CTL_CLRALE);
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_CACHEDPROG:
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		udelay(this->chip_delay);
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		this->write_byte(mtd, NAND_CMD_STATUS);
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	case NAND_CMD_READ0:
+		/* Begin command latch cycle */
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		/* Write out the start read command */
+		this->write_byte(mtd, NAND_CMD_READSTART);
+		/* End command latch cycle */
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		/* Fall through into ready check */
+		
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+/**
+ * nand_get_device - [GENERIC] Get chip for selected access
+ * @this:	the nand chip descriptor
+ * @mtd:	MTD device structure
+ * @new_state:	the state which is requested 
+ *
+ * Get the device and lock it for exclusive access
+ */
+static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
+{
+	struct nand_chip *active = this;
+
+	DECLARE_WAITQUEUE (wait, current);
+
+	/* 
+	 * Grab the lock and see if the device is available 
+	*/
+retry:
+	/* Hardware controller shared among independend devices */
+	if (this->controller) {
+		spin_lock (&this->controller->lock);
+		if (this->controller->active)
+			active = this->controller->active;
+		else
+			this->controller->active = this;
+		spin_unlock (&this->controller->lock);
+	}
+	
+	if (active == this) {
+		spin_lock (&this->chip_lock);
+		if (this->state == FL_READY) {
+			this->state = new_state;
+			spin_unlock (&this->chip_lock);
+			return;
+		}
+	}	
+	set_current_state (TASK_UNINTERRUPTIBLE);
+	add_wait_queue (&active->wq, &wait);
+	spin_unlock (&active->chip_lock);
+	schedule ();
+	remove_wait_queue (&active->wq, &wait);
+	goto retry;
+}
+
+/**
+ * nand_wait - [DEFAULT]  wait until the command is done
+ * @mtd:	MTD device structure
+ * @this:	NAND chip structure
+ * @state:	state to select the max. timeout value
+ *
+ * Wait for command done. This applies to erase and program only
+ * Erase can take up to 400ms and program up to 20ms according to 
+ * general NAND and SmartMedia specs
+ *
+*/
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+{
+
+	unsigned long	timeo = jiffies;
+	int	status;
+	
+	if (state == FL_ERASING)
+		 timeo += (HZ * 400) / 1000;
+	else
+		 timeo += (HZ * 20) / 1000;
+
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+
+	if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
+		this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1);
+	else	
+		this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
+
+	while (time_before(jiffies, timeo)) {		
+		/* Check, if we were interrupted */
+		if (this->state != state)
+			return 0;
+
+		if (this->dev_ready) {
+			if (this->dev_ready(mtd))
+				break;	
+		} else {
+			if (this->read_byte(mtd) & NAND_STATUS_READY)
+				break;
+		}
+		yield ();
+	}
+	status = (int) this->read_byte(mtd);
+	return status;
+}
+
+/**
+ * nand_write_page - [GENERIC] write one page
+ * @mtd:	MTD device structure
+ * @this:	NAND chip structure
+ * @page: 	startpage inside the chip, must be called with (page & this->pagemask)
+ * @oob_buf:	out of band data buffer
+ * @oobsel:	out of band selecttion structre
+ * @cached:	1 = enable cached programming if supported by chip
+ *
+ * Nand_page_program function is used for write and writev !
+ * This function will always program a full page of data
+ * If you call it with a non page aligned buffer, you're lost :)
+ *
+ * Cached programming is not supported yet.
+ */
+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, 
+	u_char *oob_buf,  struct nand_oobinfo *oobsel, int cached)
+{
+	int 	i, status;
+	u_char	ecc_code[32];
+	int	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
+	int  	*oob_config = oobsel->eccpos;
+	int	datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
+	int	eccbytes = 0;
+	
+	/* FIXME: Enable cached programming */
+	cached = 0;
+	
+	/* Send command to begin auto page programming */
+	this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page);
+
+	/* Write out complete page of data, take care of eccmode */
+	switch (eccmode) {
+	/* No ecc, write all */
+	case NAND_ECC_NONE:
+		printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
+		this->write_buf(mtd, this->data_poi, mtd->oobblock);
+		break;
+		
+	/* Software ecc 3/256, write all */
+	case NAND_ECC_SOFT:
+		for (; eccsteps; eccsteps--) {
+			this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
+			for (i = 0; i < 3; i++, eccidx++)
+				oob_buf[oob_config[eccidx]] = ecc_code[i];
+			datidx += this->eccsize;
+		}
+		this->write_buf(mtd, this->data_poi, mtd->oobblock);
+		break;
+	default:
+		eccbytes = this->eccbytes;
+		for (; eccsteps; eccsteps--) {
+			/* enable hardware ecc logic for write */
+			this->enable_hwecc(mtd, NAND_ECC_WRITE);
+			this->write_buf(mtd, &this->data_poi[datidx], this->eccsize);
+			this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
+			for (i = 0; i < eccbytes; i++, eccidx++)
+				oob_buf[oob_config[eccidx]] = ecc_code[i];
+			/* If the hardware ecc provides syndromes then
+			 * the ecc code must be written immidiately after
+			 * the data bytes (words) */
+			if (this->options & NAND_HWECC_SYNDROME)
+				this->write_buf(mtd, ecc_code, eccbytes);
+			datidx += this->eccsize;
+		}
+		break;
+	}
+										
+	/* Write out OOB data */
+	if (this->options & NAND_HWECC_SYNDROME)
+		this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes);
+	else 
+		this->write_buf(mtd, oob_buf, mtd->oobsize);
+
+	/* Send command to actually program the data */
+	this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1);
+
+	if (!cached) {
+		/* call wait ready function */
+		status = this->waitfunc (mtd, this, FL_WRITING);
+		/* See if device thinks it succeeded */
+		if (status & 0x01) {
+			DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
+			return -EIO;
+		}
+	} else {
+		/* FIXME: Implement cached programming ! */
+		/* wait until cache is ready*/
+		// status = this->waitfunc (mtd, this, FL_CACHEDRPG);
+	}
+	return 0;	
+}
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+/**
+ * nand_verify_pages - [GENERIC] verify the chip contents after a write
+ * @mtd:	MTD device structure
+ * @this:	NAND chip structure
+ * @page: 	startpage inside the chip, must be called with (page & this->pagemask)
+ * @numpages:	number of pages to verify
+ * @oob_buf:	out of band data buffer
+ * @oobsel:	out of band selecttion structre
+ * @chipnr:	number of the current chip
+ * @oobmode:	1 = full buffer verify, 0 = ecc only
+ *
+ * The NAND device assumes that it is always writing to a cleanly erased page.
+ * Hence, it performs its internal write verification only on bits that 
+ * transitioned from 1 to 0. The device does NOT verify the whole page on a
+ * byte by byte basis. It is possible that the page was not completely erased 
+ * or the page is becoming unusable due to wear. The read with ECC would catch 
+ * the error later when the ECC page check fails, but we would rather catch 
+ * it early in the page write stage. Better to write no data than invalid data.
+ */
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, 
+	u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
+{
+	int 	i, j, datidx = 0, oobofs = 0, res = -EIO;
+	int	eccsteps = this->eccsteps;
+	int	hweccbytes; 
+	u_char 	oobdata[64];
+
+	hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
+
+	/* Send command to read back the first page */
+	this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
+
+	for(;;) {
+		for (j = 0; j < eccsteps; j++) {
+			/* Loop through and verify the data */
+			if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) {
+				DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+				goto out;
+			}
+			datidx += mtd->eccsize;
+			/* Have we a hw generator layout ? */
+			if (!hweccbytes)
+				continue;
+			if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) {
+				DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+				goto out;
+			}
+			oobofs += hweccbytes;
+		}
+
+		/* check, if we must compare all data or if we just have to
+		 * compare the ecc bytes
+		 */
+		if (oobmode) {
+			if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) {
+				DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+				goto out;
+			}
+		} else {
+			/* Read always, else autoincrement fails */
+			this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps);
+
+			if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) {
+				int ecccnt = oobsel->eccbytes;
+		
+				for (i = 0; i < ecccnt; i++) {
+					int idx = oobsel->eccpos[i];
+					if (oobdata[idx] != oob_buf[oobofs + idx] ) {
+						DEBUG (MTD_DEBUG_LEVEL0,
+					       	"%s: Failed ECC write "
+						"verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
+						goto out;
+					}
+				}
+			}	
+		}
+		oobofs += mtd->oobsize - hweccbytes * eccsteps;
+		page++;
+		numpages--;
+
+		/* Apply delay or wait for ready/busy pin 
+		 * Do this before the AUTOINCR check, so no problems
+		 * arise if a chip which does auto increment
+		 * is marked as NOAUTOINCR by the board driver.
+		 * Do this also before returning, so the chip is
+		 * ready for the next command.
+		*/
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+
+		/* All done, return happy */
+		if (!numpages)
+			return 0;
+		
+			
+		/* Check, if the chip supports auto page increment */ 
+		if (!NAND_CANAUTOINCR(this))
+			this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
+	}
+	/* 
+	 * Terminate the read command. We come here in case of an error
+	 * So we must issue a reset command.
+	 */
+out:	 
+	this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1);
+	return res;
+}
+#endif
+
+/**
+ * nand_read - [MTD Interface] MTD compability function for nand_read_ecc
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @retlen:	pointer to variable to store the number of read bytes
+ * @buf:	the databuffer to put data
+ *
+ * This function simply calls nand_read_ecc with oob buffer and oobsel = NULL
+*/
+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
+{
+	return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
+}			   
+
+
+/**
+ * nand_read_ecc - [MTD Interface] Read data with ECC
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @retlen:	pointer to variable to store the number of read bytes
+ * @buf:	the databuffer to put data
+ * @oob_buf:	filesystem supplied oob data buffer
+ * @oobsel:	oob selection structure
+ *
+ * NAND read with ECC
+ */
+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
+			  size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
+{
+	int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1;
+	int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
+	struct nand_chip *this = mtd->priv;
+	u_char *data_poi, *oob_data = oob_buf;
+	u_char ecc_calc[32];
+	u_char ecc_code[32];
+        int eccmode, eccsteps;
+	int	*oob_config, datidx;
+	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+	int	eccbytes;
+	int	compareecc = 1;
+	int	oobreadlen;
+
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+	/* Do not allow reads past end of device */
+	if ((from + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
+		*retlen = 0;
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd ,FL_READING);
+
+	/* use userspace supplied oobinfo, if zero */
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+	
+	/* Autoplace of oob data ? Use the default placement scheme */
+	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
+		oobsel = this->autooob;
+		
+	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
+	oob_config = oobsel->eccpos;
+
+	/* Select the NAND device */
+	chipnr = (int)(from >> this->chip_shift);
+	this->select_chip(mtd, chipnr);
+
+	/* First we calculate the starting page */
+	realpage = (int) (from >> this->page_shift);
+	page = realpage & this->pagemask;
+
+	/* Get raw starting column */
+	col = from & (mtd->oobblock - 1);
+
+	end = mtd->oobblock;
+	ecc = this->eccsize;
+	eccbytes = this->eccbytes;
+	
+	if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME))
+		compareecc = 0;
+
+	oobreadlen = mtd->oobsize;
+	if (this->options & NAND_HWECC_SYNDROME) 
+		oobreadlen -= oobsel->eccbytes;
+
+	/* Loop until all data read */
+	while (read < len) {
+		
+		int aligned = (!col && (len - read) >= end);
+		/* 
+		 * If the read is not page aligned, we have to read into data buffer
+		 * due to ecc, else we read into return buffer direct
+		 */
+		if (aligned)
+			data_poi = &buf[read];
+		else 
+			data_poi = this->data_buf;
+		
+		/* Check, if we have this page in the buffer 
+		 *
+		 * FIXME: Make it work when we must provide oob data too,
+		 * check the usage of data_buf oob field
+		 */
+		if (realpage == this->pagebuf && !oob_buf) {
+			/* aligned read ? */
+			if (aligned)
+				memcpy (data_poi, this->data_buf, end);
+			goto readdata;
+		}
+
+		/* Check, if we must send the read command */
+		if (sndcmd) {
+			this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
+			sndcmd = 0;
+		}	
+
+		/* get oob area, if we have no oob buffer from fs-driver */
+		if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE)
+			oob_data = &this->data_buf[end];
+
+		eccsteps = this->eccsteps;
+		
+		switch (eccmode) {
+		case NAND_ECC_NONE: {	/* No ECC, Read in a page */
+			static unsigned long lastwhinge = 0;
+			if ((lastwhinge / HZ) != (jiffies / HZ)) {
+				printk (KERN_WARNING "Reading data from NAND FLASH without ECC is not recommended\n");
+				lastwhinge = jiffies;
+			}
+			this->read_buf(mtd, data_poi, end);
+			break;
+		}
+			
+		case NAND_ECC_SOFT:	/* Software ECC 3/256: Read in a page + oob data */
+			this->read_buf(mtd, data_poi, end);
+			for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc) 
+				this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
+			break;	
+
+		default:
+			for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) {
+				this->enable_hwecc(mtd, NAND_ECC_READ);
+				this->read_buf(mtd, &data_poi[datidx], ecc);
+
+				/* HW ecc with syndrome calculation must read the
+				 * syndrome from flash immidiately after the data */
+				if (!compareecc) {
+					/* Some hw ecc generators need to know when the
+					 * syndrome is read from flash */
+					this->enable_hwecc(mtd, NAND_ECC_READSYN);
+					this->read_buf(mtd, &oob_data[i], eccbytes);
+					/* We calc error correction directly, it checks the hw
+					 * generator for an error, reads back the syndrome and
+					 * does the error correction on the fly */
+					if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) {
+						DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " 
+							"Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
+						ecc_failed++;
+					}
+				} else {
+					this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
+				}	
+			}
+			break;						
+		}
+
+		/* read oobdata */
+		this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen);
+
+		/* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
+		if (!compareecc)
+			goto readoob;	
+		
+		/* Pick the ECC bytes out of the oob data */
+		for (j = 0; j < oobsel->eccbytes; j++)
+			ecc_code[j] = oob_data[oob_config[j]];
+
+		/* correct data, if neccecary */
+		for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
+			ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
+			
+			/* Get next chunk of ecc bytes */
+			j += eccbytes;
+			
+			/* Check, if we have a fs supplied oob-buffer, 
+			 * This is the legacy mode. Used by YAFFS1
+			 * Should go away some day
+			 */
+			if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) { 
+				int *p = (int *)(&oob_data[mtd->oobsize]);
+				p[i] = ecc_status;
+			}
+			
+			if (ecc_status == -1) {	
+				DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
+				ecc_failed++;
+			}
+		}		
+
+	readoob:
+		/* check, if we have a fs supplied oob-buffer */
+		if (oob_buf) {
+			/* without autoplace. Legacy mode used by YAFFS1 */
+			switch(oobsel->useecc) {
+			case MTD_NANDECC_AUTOPLACE:
+				/* Walk through the autoplace chunks */
+				for (i = 0, j = 0; j < mtd->oobavail; i++) {
+					int from = oobsel->oobfree[i][0];
+					int num = oobsel->oobfree[i][1];
+					memcpy(&oob_buf[oob], &oob_data[from], num);
+					j+= num;
+				}
+				oob += mtd->oobavail;
+				break;
+			case MTD_NANDECC_PLACE:
+				/* YAFFS1 legacy mode */
+				oob_data += this->eccsteps * sizeof (int);
+			default:
+				oob_data += mtd->oobsize;
+			}
+		}
+	readdata:
+		/* Partial page read, transfer data into fs buffer */
+		if (!aligned) { 
+			for (j = col; j < end && read < len; j++)
+				buf[read++] = data_poi[j];
+			this->pagebuf = realpage;	
+		} else		
+			read += mtd->oobblock;
+
+		/* Apply delay or wait for ready/busy pin 
+		 * Do this before the AUTOINCR check, so no problems
+		 * arise if a chip which does auto increment
+		 * is marked as NOAUTOINCR by the board driver.
+		*/
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+			
+		if (read == len)
+			break;	
+
+		/* For subsequent reads align to page boundary. */
+		col = 0;
+		/* Increment page address */
+		realpage++;
+
+		page = realpage & this->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!page) {
+			chipnr++;
+			this->select_chip(mtd, -1);
+			this->select_chip(mtd, chipnr);
+		}
+		/* Check, if the chip supports auto page increment 
+		 * or if we have hit a block boundary. 
+		*/ 
+		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
+			sndcmd = 1;				
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	/*
+	 * Return success, if no ECC failures, else -EBADMSG
+	 * fs driver will take care of that, because
+	 * retlen == desired len and result == -EBADMSG
+	 */
+	*retlen = read;
+	return ecc_failed ? -EBADMSG : 0;
+}
+
+/**
+ * nand_read_oob - [MTD Interface] NAND read out-of-band
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @retlen:	pointer to variable to store the number of read bytes
+ * @buf:	the databuffer to put data
+ *
+ * NAND read out-of-band data from the spare area
+ */
+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
+{
+	int i, col, page, chipnr;
+	struct nand_chip *this = mtd->priv;
+	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+	/* Shift to get page */
+	page = (int)(from >> this->page_shift);
+	chipnr = (int)(from >> this->chip_shift);
+	
+	/* Mask to get column */
+	col = from & (mtd->oobsize - 1);
+
+	/* Initialize return length value */
+	*retlen = 0;
+
+	/* Do not allow reads past end of device */
+	if ((from + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n");
+		*retlen = 0;
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd , FL_READING);
+
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Send the read command */
+	this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);
+	/* 
+	 * Read the data, if we read more than one page
+	 * oob data, let the device transfer the data !
+	 */
+	i = 0;
+	while (i < len) {
+		int thislen = mtd->oobsize - col;
+		thislen = min_t(int, thislen, len);
+		this->read_buf(mtd, &buf[i], thislen);
+		i += thislen;
+		
+		/* Apply delay or wait for ready/busy pin 
+		 * Do this before the AUTOINCR check, so no problems
+		 * arise if a chip which does auto increment
+		 * is marked as NOAUTOINCR by the board driver.
+		*/
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+
+		/* Read more ? */
+		if (i < len) {
+			page++;
+			col = 0;
+
+			/* Check, if we cross a chip boundary */
+			if (!(page & this->pagemask)) {
+				chipnr++;
+				this->select_chip(mtd, -1);
+				this->select_chip(mtd, chipnr);
+			}
+				
+			/* Check, if the chip supports auto page increment 
+			 * or if we have hit a block boundary. 
+			*/ 
+			if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
+				/* For subsequent page reads set offset to 0 */
+			        this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
+			}
+		}
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	/* Return happy */
+	*retlen = len;
+	return 0;
+}
+
+/**
+ * nand_read_raw - [GENERIC] Read raw data including oob into buffer
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @ooblen:	number of oob data bytes to read
+ *
+ * Read raw data including oob into buffer
+ */
+int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen)
+{
+	struct nand_chip *this = mtd->priv;
+	int page = (int) (from >> this->page_shift);
+	int chip = (int) (from >> this->chip_shift);
+	int sndcmd = 1;
+	int cnt = 0;
+	int pagesize = mtd->oobblock + mtd->oobsize;
+	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+
+	/* Do not allow reads past end of device */
+	if ((from + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd , FL_READING);
+
+	this->select_chip (mtd, chip);
+	
+	/* Add requested oob length */
+	len += ooblen;
+	
+	while (len) {
+		if (sndcmd)
+			this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);
+		sndcmd = 0;	
+
+		this->read_buf (mtd, &buf[cnt], pagesize);
+
+		len -= pagesize;
+		cnt += pagesize;
+		page++;
+		
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+			
+		/* Check, if the chip supports auto page increment */ 
+		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
+			sndcmd = 1;
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+	return 0;
+}
+
+
+/** 
+ * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer 
+ * @mtd:	MTD device structure
+ * @fsbuf:	buffer given by fs driver
+ * @oobsel:	out of band selection structre
+ * @autoplace:	1 = place given buffer into the oob bytes
+ * @numpages:	number of pages to prepare
+ *
+ * Return:
+ * 1. Filesystem buffer available and autoplacement is off,
+ *    return filesystem buffer
+ * 2. No filesystem buffer or autoplace is off, return internal
+ *    buffer
+ * 3. Filesystem buffer is given and autoplace selected
+ *    put data from fs buffer into internal buffer and
+ *    retrun internal buffer
+ *
+ * Note: The internal buffer is filled with 0xff. This must
+ * be done only once, when no autoplacement happens
+ * Autoplacement sets the buffer dirty flag, which
+ * forces the 0xff fill before using the buffer again.
+ *
+*/
+static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel,
+		int autoplace, int numpages)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, len, ofs;
+
+	/* Zero copy fs supplied buffer */
+	if (fsbuf && !autoplace) 
+		return fsbuf;
+
+	/* Check, if the buffer must be filled with ff again */
+	if (this->oobdirty) {	
+		memset (this->oob_buf, 0xff, 
+			mtd->oobsize << (this->phys_erase_shift - this->page_shift));
+		this->oobdirty = 0;
+	}	
+	
+	/* If we have no autoplacement or no fs buffer use the internal one */
+	if (!autoplace || !fsbuf)
+		return this->oob_buf;
+	
+	/* Walk through the pages and place the data */
+	this->oobdirty = 1;
+	ofs = 0;
+	while (numpages--) {
+		for (i = 0, len = 0; len < mtd->oobavail; i++) {
+			int to = ofs + oobsel->oobfree[i][0];
+			int num = oobsel->oobfree[i][1];
+			memcpy (&this->oob_buf[to], fsbuf, num);
+			len += num;
+			fsbuf += num;
+		}
+		ofs += mtd->oobavail;
+	}
+	return this->oob_buf;
+}
+
+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
+
+/**
+ * nand_write - [MTD Interface] compability function for nand_write_ecc
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ *
+ * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL
+ *
+*/
+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
+{
+	return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
+}
+			   
+/**
+ * nand_write_ecc - [MTD Interface] NAND write with ECC
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ * @eccbuf:	filesystem supplied oob data buffer
+ * @oobsel:	oob selection structure
+ *
+ * NAND write with ECC
+ */
+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
+{
+	int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr;
+	int autoplace = 0, numpages, totalpages;
+	struct nand_chip *this = mtd->priv;
+	u_char *oobbuf, *bufstart;
+	int	ppblock = (1 << (this->phys_erase_shift - this->page_shift));
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+
+	/* Initialize retlen, in case of early exit */
+	*retlen = 0;
+
+	/* Do not allow write past end of device */
+	if ((to + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
+		return -EINVAL;
+	}
+
+	/* reject writes, which are not page aligned */	
+	if (NOTALIGNED (to) || NOTALIGNED(len)) {
+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_WRITING);
+
+	/* Calculate chipnr */
+	chipnr = (int)(to >> this->chip_shift);
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		goto out;
+
+	/* if oobsel is NULL, use chip defaults */
+	if (oobsel == NULL) 
+		oobsel = &mtd->oobinfo;		
+		
+	/* Autoplace of oob data ? Use the default placement scheme */
+	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
+		oobsel = this->autooob;
+		autoplace = 1;
+	}	
+
+	/* Setup variables and oob buffer */
+	totalpages = len >> this->page_shift;
+	page = (int) (to >> this->page_shift);
+	/* Invalidate the page cache, if we write to the cached page */
+	if (page <= this->pagebuf && this->pagebuf < (page + totalpages))  
+		this->pagebuf = -1;
+	
+	/* Set it relative to chip */
+	page &= this->pagemask;
+	startpage = page;
+	/* Calc number of pages we can write in one go */
+	numpages = min (ppblock - (startpage  & (ppblock - 1)), totalpages);
+	oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages);
+	bufstart = (u_char *)buf;
+
+	/* Loop until all data is written */
+	while (written < len) {
+
+		this->data_poi = (u_char*) &buf[written];
+		/* Write one page. If this is the last page to write
+		 * or the last page in this block, then use the
+		 * real pageprogram command, else select cached programming
+		 * if supported by the chip.
+		 */
+		ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0));
+		if (ret) {
+			DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);
+			goto out;
+		}	
+		/* Next oob page */
+		oob += mtd->oobsize;
+		/* Update written bytes count */
+		written += mtd->oobblock;
+		if (written == len) 
+			goto cmp;
+		
+		/* Increment page address */
+		page++;
+
+		/* Have we hit a block boundary ? Then we have to verify and
+		 * if verify is ok, we have to setup the oob buffer for
+		 * the next pages.
+		*/
+		if (!(page & (ppblock - 1))){
+			int ofs;
+			this->data_poi = bufstart;
+			ret = nand_verify_pages (mtd, this, startpage, 
+				page - startpage,
+				oobbuf, oobsel, chipnr, (eccbuf != NULL));
+			if (ret) {
+				DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
+				goto out;
+			}	
+			*retlen = written;
+
+			ofs = autoplace ? mtd->oobavail : mtd->oobsize;
+			if (eccbuf)
+				eccbuf += (page - startpage) * ofs;
+			totalpages -= page - startpage;
+			numpages = min (totalpages, ppblock);
+			page &= this->pagemask;
+			startpage = page;
+			oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, 
+					autoplace, numpages);
+			/* Check, if we cross a chip boundary */
+			if (!page) {
+				chipnr++;
+				this->select_chip(mtd, -1);
+				this->select_chip(mtd, chipnr);
+			}
+		}
+	}
+	/* Verify the remaining pages */
+cmp:
+	this->data_poi = bufstart;
+ 	ret = nand_verify_pages (mtd, this, startpage, totalpages,
+		oobbuf, oobsel, chipnr, (eccbuf != NULL));
+	if (!ret)
+		*retlen = written;
+	else	
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
+
+out:
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	return ret;
+}
+
+
+/**
+ * nand_write_oob - [MTD Interface] NAND write out-of-band
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ *
+ * NAND write out-of-band
+ */
+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
+{
+	int column, page, status, ret = -EIO, chipnr;
+	struct nand_chip *this = mtd->priv;
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+
+	/* Shift to get page */
+	page = (int) (to >> this->page_shift);
+	chipnr = (int) (to >> this->chip_shift);
+
+	/* Mask to get column */
+	column = to & (mtd->oobsize - 1);
+
+	/* Initialize return length value */
+	*retlen = 0;
+
+	/* Do not allow write past end of page */
+	if ((column + len) > mtd->oobsize) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_WRITING);
+
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Reset the chip. Some chips (like the Toshiba TC5832DC found
+	   in one of my DiskOnChip 2000 test units) will clear the whole
+	   data page too if we don't do this. I have no clue why, but
+	   I seem to have 'fixed' it in the doc2000 driver in
+	   August 1999.  dwmw2. */
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		goto out;
+	
+	/* Invalidate the page cache, if we write to the cached page */
+	if (page == this->pagebuf)
+		this->pagebuf = -1;
+
+	if (NAND_MUST_PAD(this)) {
+		/* Write out desired data */
+		this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
+		/* prepad 0xff for partial programming */
+		this->write_buf(mtd, ffchars, column);
+		/* write data */
+		this->write_buf(mtd, buf, len);
+		/* postpad 0xff for partial programming */
+		this->write_buf(mtd, ffchars, mtd->oobsize - (len+column));
+	} else {
+		/* Write out desired data */
+		this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask);
+		/* write data */
+		this->write_buf(mtd, buf, len);
+	}
+	/* Send command to program the OOB data */
+	this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = this->waitfunc (mtd, this, FL_WRITING);
+
+	/* See if device thinks it succeeded */
+	if (status & 0x01) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
+		ret = -EIO;
+		goto out;
+	}
+	/* Return happy */
+	*retlen = len;
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+	/* Send command to read back the data */
+	this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask);
+
+	if (this->verify_buf(mtd, buf, len)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page);
+		ret = -EIO;
+		goto out;
+	}
+#endif
+	ret = 0;
+out:
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	return ret;
+}
+
+
+/**
+ * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc
+ * @mtd:	MTD device structure
+ * @vecs:	the iovectors to write
+ * @count:	number of vectors
+ * @to:		offset to write to
+ * @retlen:	pointer to variable to store the number of written bytes
+ *
+ * NAND write with kvec. This just calls the ecc function
+ */
+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, 
+		loff_t to, size_t * retlen)
+{
+	return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));	
+}
+
+/**
+ * nand_writev_ecc - [MTD Interface] write with iovec with ecc
+ * @mtd:	MTD device structure
+ * @vecs:	the iovectors to write
+ * @count:	number of vectors
+ * @to:		offset to write to
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @eccbuf:	filesystem supplied oob data buffer
+ * @oobsel:	oob selection structure
+ *
+ * NAND write with iovec with ecc
+ */
+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, 
+		loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
+{
+	int i, page, len, total_len, ret = -EIO, written = 0, chipnr;
+	int oob, numpages, autoplace = 0, startpage;
+	struct nand_chip *this = mtd->priv;
+	int	ppblock = (1 << (this->phys_erase_shift - this->page_shift));
+	u_char *oobbuf, *bufstart;
+
+	/* Preset written len for early exit */
+	*retlen = 0;
+
+	/* Calculate total length of data */
+	total_len = 0;
+	for (i = 0; i < count; i++)
+		total_len += (int) vecs[i].iov_len;
+
+	DEBUG (MTD_DEBUG_LEVEL3,
+	       "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
+
+	/* Do not allow write past end of page */
+	if ((to + total_len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
+		return -EINVAL;
+	}
+
+	/* reject writes, which are not page aligned */	
+	if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_WRITING);
+
+	/* Get the current chip-nr */
+	chipnr = (int) (to >> this->chip_shift);
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		goto out;
+
+	/* if oobsel is NULL, use chip defaults */
+	if (oobsel == NULL) 
+		oobsel = &mtd->oobinfo;		
+
+	/* Autoplace of oob data ? Use the default placement scheme */
+	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
+		oobsel = this->autooob;
+		autoplace = 1;
+	}	
+
+	/* Setup start page */
+	page = (int) (to >> this->page_shift);
+	/* Invalidate the page cache, if we write to the cached page */
+	if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))  
+		this->pagebuf = -1;
+
+	startpage = page & this->pagemask;
+
+	/* Loop until all kvec' data has been written */
+	len = 0;
+	while (count) {
+		/* If the given tuple is >= pagesize then
+		 * write it out from the iov
+		 */
+		if ((vecs->iov_len - len) >= mtd->oobblock) {
+			/* Calc number of pages we can write
+			 * out of this iov in one go */
+			numpages = (vecs->iov_len - len) >> this->page_shift;
+			/* Do not cross block boundaries */
+			numpages = min (ppblock - (startpage & (ppblock - 1)), numpages);
+			oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
+			bufstart = (u_char *)vecs->iov_base;
+			bufstart += len;
+			this->data_poi = bufstart;
+			oob = 0;
+			for (i = 1; i <= numpages; i++) {
+				/* Write one page. If this is the last page to write
+				 * then use the real pageprogram command, else select 
+				 * cached programming if supported by the chip.
+				 */
+				ret = nand_write_page (mtd, this, page & this->pagemask, 
+					&oobbuf[oob], oobsel, i != numpages);
+				if (ret)
+					goto out;
+				this->data_poi += mtd->oobblock;
+				len += mtd->oobblock;
+				oob += mtd->oobsize;
+				page++;
+			}
+			/* Check, if we have to switch to the next tuple */
+			if (len >= (int) vecs->iov_len) {
+				vecs++;
+				len = 0;
+				count--;
+			}
+		} else {
+			/* We must use the internal buffer, read data out of each 
+			 * tuple until we have a full page to write
+			 */
+			int cnt = 0;
+			while (cnt < mtd->oobblock) {
+				if (vecs->iov_base != NULL && vecs->iov_len) 
+					this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
+				/* Check, if we have to switch to the next tuple */
+				if (len >= (int) vecs->iov_len) {
+					vecs++;
+					len = 0;
+					count--;
+				}
+			}
+			this->pagebuf = page;	
+			this->data_poi = this->data_buf;	
+			bufstart = this->data_poi;
+			numpages = 1;		
+			oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
+			ret = nand_write_page (mtd, this, page & this->pagemask,
+				oobbuf, oobsel, 0);
+			if (ret)
+				goto out;
+			page++;
+		}
+
+		this->data_poi = bufstart;
+		ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0);
+		if (ret)
+			goto out;
+			
+		written += mtd->oobblock * numpages;
+		/* All done ? */
+		if (!count)
+			break;
+
+		startpage = page & this->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!startpage) {
+			chipnr++;
+			this->select_chip(mtd, -1);
+			this->select_chip(mtd, chipnr);
+		}
+	}
+	ret = 0;
+out:
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	*retlen = written;
+	return ret;
+}
+
+/**
+ * single_erease_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd:	MTD device structure
+ * @page:	the page address of the block which will be erased
+ *
+ * Standard erase command for NAND chips
+ */
+static void single_erase_cmd (struct mtd_info *mtd, int page)
+{
+	struct nand_chip *this = mtd->priv;
+	/* Send commands to erase a block */
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
+	this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+}
+
+/**
+ * multi_erease_cmd - [GENERIC] AND specific block erase command function
+ * @mtd:	MTD device structure
+ * @page:	the page address of the block which will be erased
+ *
+ * AND multi block erase command function
+ * Erase 4 consecutive blocks
+ */
+static void multi_erase_cmd (struct mtd_info *mtd, int page)
+{
+	struct nand_chip *this = mtd->priv;
+	/* Send commands to erase a block */
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
+	this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+}
+
+/**
+ * nand_erase - [MTD Interface] erase block(s)
+ * @mtd:	MTD device structure
+ * @instr:	erase instruction
+ *
+ * Erase one ore more blocks
+ */
+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+	return nand_erase_nand (mtd, instr, 0);
+}
+ 
+/**
+ * nand_erase_intern - [NAND Interface] erase block(s)
+ * @mtd:	MTD device structure
+ * @instr:	erase instruction
+ * @allowbbt:	allow erasing the bbt area
+ *
+ * Erase one ore more blocks
+ */
+int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
+{
+	int page, len, status, pages_per_block, ret, chipnr;
+	struct nand_chip *this = mtd->priv;
+
+	DEBUG (MTD_DEBUG_LEVEL3,
+	       "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
+
+	/* Start address must align on block boundary */
+	if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+		return -EINVAL;
+	}
+
+	/* Length must align on block boundary */
+	if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow erase past end of device */
+	if ((instr->len + instr->addr) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
+		return -EINVAL;
+	}
+
+	instr->fail_addr = 0xffffffff;
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_ERASING);
+
+	/* Shift to get first page */
+	page = (int) (instr->addr >> this->page_shift);
+	chipnr = (int) (instr->addr >> this->chip_shift);
+
+	/* Calculate pages in each block */
+	pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
+
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Check the WP bit */
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
+		instr->state = MTD_ERASE_FAILED;
+		goto erase_exit;
+	}
+
+	/* Loop through the pages */
+	len = instr->len;
+
+	instr->state = MTD_ERASING;
+
+	while (len) {
+		/* Check if we have a bad block, we do not erase bad blocks ! */
+		if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) {
+			printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
+			instr->state = MTD_ERASE_FAILED;
+			goto erase_exit;
+		}
+		
+		/* Invalidate the page cache, if we erase the block which contains 
+		   the current cached page */
+		if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
+			this->pagebuf = -1;
+
+		this->erase_cmd (mtd, page & this->pagemask);
+		
+		status = this->waitfunc (mtd, this, FL_ERASING);
+
+		/* See if block erase succeeded */
+		if (status & 0x01) {
+			DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
+			instr->state = MTD_ERASE_FAILED;
+			instr->fail_addr = (page << this->page_shift);
+			goto erase_exit;
+		}
+		
+		/* Increment page address and decrement length */
+		len -= (1 << this->phys_erase_shift);
+		page += pages_per_block;
+
+		/* Check, if we cross a chip boundary */
+		if (len && !(page & this->pagemask)) {
+			chipnr++;
+			this->select_chip(mtd, -1);
+			this->select_chip(mtd, chipnr);
+		}
+	}
+	instr->state = MTD_ERASE_DONE;
+
+erase_exit:
+
+	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+	/* Do call back function */
+	if (!ret)
+		mtd_erase_callback(instr);
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	/* Return more or less happy */
+	return ret;
+}
+
+/**
+ * nand_sync - [MTD Interface] sync
+ * @mtd:	MTD device structure
+ *
+ * Sync is actually a wait for chip ready function
+ */
+static void nand_sync (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_SYNCING);
+	/* Release it and go back */
+	nand_release_device (mtd);
+}
+
+
+/**
+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset relative to mtd start
+ */
+static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
+{
+	/* Check for invalid offset */
+	if (ofs > mtd->size) 
+		return -EINVAL;
+	
+	return nand_block_checkbad (mtd, ofs, 1, 0);
+}
+
+/**
+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset relative to mtd start
+ */
+static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *this = mtd->priv;
+	int ret;
+
+        if ((ret = nand_block_isbad(mtd, ofs))) {
+        	/* If it was bad already, return success and do nothing. */
+		if (ret > 0)
+			return 0;
+        	return ret;
+        }
+
+	return this->block_markbad(mtd, ofs);
+}
+
+/**
+ * nand_scan - [NAND Interface] Scan for the NAND device
+ * @mtd:	MTD device structure
+ * @maxchips:	Number of chips to scan for
+ *
+ * This fills out all the not initialized function pointers
+ * with the defaults.
+ * The flash ID is read and the mtd/chip structures are
+ * filled with the appropriate values. Buffers are allocated if
+ * they are not provided by the board driver
+ *
+ */
+int nand_scan (struct mtd_info *mtd, int maxchips)
+{
+	int i, j, nand_maf_id, nand_dev_id, busw;
+	struct nand_chip *this = mtd->priv;
+
+	/* Get buswidth to select the correct functions*/
+	busw = this->options & NAND_BUSWIDTH_16;
+
+	/* check for proper chip_delay setup, set 20us if not */
+	if (!this->chip_delay)
+		this->chip_delay = 20;
+
+	/* check, if a user supplied command function given */
+	if (this->cmdfunc == NULL)
+		this->cmdfunc = nand_command;
+
+	/* check, if a user supplied wait function given */
+	if (this->waitfunc == NULL)
+		this->waitfunc = nand_wait;
+
+	if (!this->select_chip)
+		this->select_chip = nand_select_chip;
+	if (!this->write_byte)
+		this->write_byte = busw ? nand_write_byte16 : nand_write_byte;
+	if (!this->read_byte)
+		this->read_byte = busw ? nand_read_byte16 : nand_read_byte;
+	if (!this->write_word)
+		this->write_word = nand_write_word;
+	if (!this->read_word)
+		this->read_word = nand_read_word;
+	if (!this->block_bad)
+		this->block_bad = nand_block_bad;
+	if (!this->block_markbad)
+		this->block_markbad = nand_default_block_markbad;
+	if (!this->write_buf)
+		this->write_buf = busw ? nand_write_buf16 : nand_write_buf;
+	if (!this->read_buf)
+		this->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+	if (!this->verify_buf)
+		this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
+	if (!this->scan_bbt)
+		this->scan_bbt = nand_default_bbt;
+
+	/* Select the device */
+	this->select_chip(mtd, 0);
+
+	/* Send the command for reading device ID */
+	this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+	nand_maf_id = this->read_byte(mtd);
+	nand_dev_id = this->read_byte(mtd);
+
+	/* Print and store flash device information */
+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+				
+		if (nand_dev_id != nand_flash_ids[i].id) 
+			continue;
+
+		if (!mtd->name) mtd->name = nand_flash_ids[i].name;
+		this->chipsize = nand_flash_ids[i].chipsize << 20;
+		
+		/* New devices have all the information in additional id bytes */
+		if (!nand_flash_ids[i].pagesize) {
+			int extid;
+			/* The 3rd id byte contains non relevant data ATM */
+			extid = this->read_byte(mtd);
+			/* The 4th id byte is the important one */
+			extid = this->read_byte(mtd);
+			/* Calc pagesize */
+			mtd->oobblock = 1024 << (extid & 0x3);
+			extid >>= 2;
+			/* Calc oobsize */
+			mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
+			extid >>= 2;
+			/* Calc blocksize. Blocksize is multiples of 64KiB */
+			mtd->erasesize = (64 * 1024)  << (extid & 0x03);
+			extid >>= 2;
+			/* Get buswidth information */
+			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+		
+		} else {
+			/* Old devices have this data hardcoded in the
+			 * device id table */
+			mtd->erasesize = nand_flash_ids[i].erasesize;
+			mtd->oobblock = nand_flash_ids[i].pagesize;
+			mtd->oobsize = mtd->oobblock / 32;
+			busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
+		}
+
+		/* Check, if buswidth is correct. Hardware drivers should set
+		 * this correct ! */
+		if (busw != (this->options & NAND_BUSWIDTH_16)) {
+			printk (KERN_INFO "NAND device: Manufacturer ID:"
+				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
+				nand_manuf_ids[i].name , mtd->name);
+			printk (KERN_WARNING 
+				"NAND bus width %d instead %d bit\n", 
+					(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
+					busw ? 16 : 8);
+			this->select_chip(mtd, -1);
+			return 1;	
+		}
+		
+		/* Calculate the address shift from the page size */	
+		this->page_shift = ffs(mtd->oobblock) - 1;
+		this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
+		this->chip_shift = ffs(this->chipsize) - 1;
+
+		/* Set the bad block position */
+		this->badblockpos = mtd->oobblock > 512 ? 
+			NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
+
+		/* Get chip options, preserve non chip based options */
+		this->options &= ~NAND_CHIPOPTIONS_MSK;
+		this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
+		/* Set this as a default. Board drivers can override it, if neccecary */
+		this->options |= NAND_NO_AUTOINCR;
+		/* Check if this is a not a samsung device. Do not clear the options
+		 * for chips which are not having an extended id.
+		 */	
+		if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
+			this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+		
+		/* Check for AND chips with 4 page planes */
+		if (this->options & NAND_4PAGE_ARRAY)
+			this->erase_cmd = multi_erase_cmd;
+		else
+			this->erase_cmd = single_erase_cmd;
+
+		/* Do not replace user supplied command function ! */
+		if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
+			this->cmdfunc = nand_command_lp;
+				
+		/* Try to identify manufacturer */
+		for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
+			if (nand_manuf_ids[j].id == nand_maf_id)
+				break;
+		}
+		printk (KERN_INFO "NAND device: Manufacturer ID:"
+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
+			nand_manuf_ids[j].name , nand_flash_ids[i].name);
+		break;
+	}
+
+	if (!nand_flash_ids[i].name) {
+		printk (KERN_WARNING "No NAND device found!!!\n");
+		this->select_chip(mtd, -1);
+		return 1;
+	}
+
+	for (i=1; i < maxchips; i++) {
+		this->select_chip(mtd, i);
+
+		/* Send the command for reading device ID */
+		this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
+
+		/* Read manufacturer and device IDs */
+		if (nand_maf_id != this->read_byte(mtd) ||
+		    nand_dev_id != this->read_byte(mtd))
+			break;
+	}
+	if (i > 1)
+		printk(KERN_INFO "%d NAND chips detected\n", i);
+	
+	/* Allocate buffers, if neccecary */
+	if (!this->oob_buf) {
+		size_t len;
+		len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
+		this->oob_buf = kmalloc (len, GFP_KERNEL);
+		if (!this->oob_buf) {
+			printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
+			return -ENOMEM;
+		}
+		this->options |= NAND_OOBBUF_ALLOC;
+	}
+	
+	if (!this->data_buf) {
+		size_t len;
+		len = mtd->oobblock + mtd->oobsize;
+		this->data_buf = kmalloc (len, GFP_KERNEL);
+		if (!this->data_buf) {
+			if (this->options & NAND_OOBBUF_ALLOC)
+				kfree (this->oob_buf);
+			printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
+			return -ENOMEM;
+		}
+		this->options |= NAND_DATABUF_ALLOC;
+	}
+
+	/* Store the number of chips and calc total size for mtd */
+	this->numchips = i;
+	mtd->size = i * this->chipsize;
+	/* Convert chipsize to number of pages per chip -1. */
+	this->pagemask = (this->chipsize >> this->page_shift) - 1;
+	/* Preset the internal oob buffer */
+	memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
+
+	/* If no default placement scheme is given, select an
+	 * appropriate one */
+	if (!this->autooob) {
+		/* Select the appropriate default oob placement scheme for
+		 * placement agnostic filesystems */
+		switch (mtd->oobsize) { 
+		case 8:
+			this->autooob = &nand_oob_8;
+			break;
+		case 16:
+			this->autooob = &nand_oob_16;
+			break;
+		case 64:
+			this->autooob = &nand_oob_64;
+			break;
+		default:
+			printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
+				mtd->oobsize);
+			BUG();
+		}
+	}
+	
+	/* The number of bytes available for the filesystem to place fs dependend
+	 * oob data */
+	if (this->options & NAND_BUSWIDTH_16) {
+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
+		if (this->autooob->eccbytes & 0x01)
+			mtd->oobavail--;
+	} else
+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
+
+	/* 
+	 * check ECC mode, default to software
+	 * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
+	 * fallback to software ECC 
+	*/
+	this->eccsize = 256;	/* set default eccsize */	
+	this->eccbytes = 3;
+
+	switch (this->eccmode) {
+	case NAND_ECC_HW12_2048:
+		if (mtd->oobblock < 2048) {
+			printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+			       mtd->oobblock);
+			this->eccmode = NAND_ECC_SOFT;
+			this->calculate_ecc = nand_calculate_ecc;
+			this->correct_data = nand_correct_data;
+		} else
+			this->eccsize = 2048;
+		break;
+
+	case NAND_ECC_HW3_512: 
+	case NAND_ECC_HW6_512: 
+	case NAND_ECC_HW8_512: 
+		if (mtd->oobblock == 256) {
+			printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
+			this->eccmode = NAND_ECC_SOFT;
+			this->calculate_ecc = nand_calculate_ecc;
+			this->correct_data = nand_correct_data;
+		} else 
+			this->eccsize = 512; /* set eccsize to 512 */
+		break;
+			
+	case NAND_ECC_HW3_256:
+		break;
+		
+	case NAND_ECC_NONE: 
+		printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
+		this->eccmode = NAND_ECC_NONE;
+		break;
+
+	case NAND_ECC_SOFT:	
+		this->calculate_ecc = nand_calculate_ecc;
+		this->correct_data = nand_correct_data;
+		break;
+
+	default:
+		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
+		BUG();	
+	}	
+
+	/* Check hardware ecc function availability and adjust number of ecc bytes per 
+	 * calculation step
+	*/
+	switch (this->eccmode) {
+	case NAND_ECC_HW12_2048:
+		this->eccbytes += 4;
+	case NAND_ECC_HW8_512: 
+		this->eccbytes += 2;
+	case NAND_ECC_HW6_512: 
+		this->eccbytes += 3;
+	case NAND_ECC_HW3_512: 
+	case NAND_ECC_HW3_256:
+		if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
+			break;
+		printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
+		BUG();	
+	}
+		
+	mtd->eccsize = this->eccsize;
+	
+	/* Set the number of read / write steps for one page to ensure ECC generation */
+	switch (this->eccmode) {
+	case NAND_ECC_HW12_2048:
+		this->eccsteps = mtd->oobblock / 2048;
+		break;
+	case NAND_ECC_HW3_512:
+	case NAND_ECC_HW6_512:
+	case NAND_ECC_HW8_512:
+		this->eccsteps = mtd->oobblock / 512;
+		break;
+	case NAND_ECC_HW3_256:
+	case NAND_ECC_SOFT:	
+		this->eccsteps = mtd->oobblock / 256;
+		break;
+		
+	case NAND_ECC_NONE: 
+		this->eccsteps = 1;
+		break;
+	}
+	
+	/* Initialize state, waitqueue and spinlock */
+	this->state = FL_READY;
+	init_waitqueue_head (&this->wq);
+	spin_lock_init (&this->chip_lock);
+
+	/* De-select the device */
+	this->select_chip(mtd, -1);
+
+	/* Invalidate the pagebuffer reference */
+	this->pagebuf = -1;
+
+	/* Fill in remaining MTD driver data */
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
+	mtd->ecctype = MTD_ECC_SW;
+	mtd->erase = nand_erase;
+	mtd->point = NULL;
+	mtd->unpoint = NULL;
+	mtd->read = nand_read;
+	mtd->write = nand_write;
+	mtd->read_ecc = nand_read_ecc;
+	mtd->write_ecc = nand_write_ecc;
+	mtd->read_oob = nand_read_oob;
+	mtd->write_oob = nand_write_oob;
+	mtd->readv = NULL;
+	mtd->writev = nand_writev;
+	mtd->writev_ecc = nand_writev_ecc;
+	mtd->sync = nand_sync;
+	mtd->lock = NULL;
+	mtd->unlock = NULL;
+	mtd->suspend = NULL;
+	mtd->resume = NULL;
+	mtd->block_isbad = nand_block_isbad;
+	mtd->block_markbad = nand_block_markbad;
+
+	/* and make the autooob the default one */
+	memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
+
+	mtd->owner = THIS_MODULE;
+
+	/* Build bad block table */
+	return this->scan_bbt (mtd);
+}
+
+/**
+ * nand_release - [NAND Interface] Free resources held by the NAND device 
+ * @mtd:	MTD device structure
+*/
+void nand_release (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	/* Deregister partitions */
+	del_mtd_partitions (mtd);
+#endif
+	/* Deregister the device */
+	del_mtd_device (mtd);
+
+	/* Free bad block table memory, if allocated */
+	if (this->bbt)
+		kfree (this->bbt);
+	/* Buffer allocated by nand_scan ? */
+	if (this->options & NAND_OOBBUF_ALLOC)
+		kfree (this->oob_buf);
+	/* Buffer allocated by nand_scan ? */
+	if (this->options & NAND_DATABUF_ALLOC)
+		kfree (this->data_buf);
+}
+
+EXPORT_SYMBOL (nand_scan);
+EXPORT_SYMBOL (nand_release);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION ("Generic NAND flash driver code");
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
new file mode 100644
index 000000000000..9a1949751c1f
--- /dev/null
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -0,0 +1,1056 @@
+/*
+ *  drivers/mtd/nand_bbt.c
+ *
+ *  Overview:
+ *   Bad block table support for the NAND driver
+ *   
+ *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Description:
+ *
+ * When nand_scan_bbt is called, then it tries to find the bad block table 
+ * depending on the options in the bbt descriptor(s). If a bbt is found 
+ * then the contents are read and the memory based bbt is created. If a 
+ * mirrored bbt is selected then the mirror is searched too and the
+ * versions are compared. If the mirror has a greater version number 
+ * than the mirror bbt is used to build the memory based bbt.
+ * If the tables are not versioned, then we "or" the bad block information.
+ * If one of the bbt's is out of date or does not exist it is (re)created. 
+ * If no bbt exists at all then the device is scanned for factory marked 
+ * good / bad blocks and the bad block tables are created. 
+ *
+ * For manufacturer created bbts like the one found on M-SYS DOC devices 
+ * the bbt is searched and read but never created
+ *
+ * The autogenerated bad block table is located in the last good blocks 
+ * of the device. The table is mirrored, so it can be updated eventually. 
+ * The table is marked in the oob area with an ident pattern and a version 
+ * number which indicates which of both tables is more up to date.
+ *
+ * The table uses 2 bits per block
+ * 11b: 	block is good
+ * 00b: 	block is factory marked bad
+ * 01b, 10b: 	block is marked bad due to wear
+ *
+ * The memory bad block table uses the following scheme:
+ * 00b:		block is good
+ * 01b:		block is marked bad due to wear
+ * 10b:		block is reserved (to protect the bbt area)
+ * 11b:		block is factory marked bad
+ * 
+ * Multichip devices like DOC store the bad block info per floor.
+ *
+ * Following assumptions are made:
+ * - bbts start at a page boundary, if autolocated on a block boundary
+ * - the space neccecary for a bbt in FLASH does not exceed a block boundary
+ * 
+ */
+
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+
+/** 
+ * check_pattern - [GENERIC] check if a pattern is in the buffer
+ * @buf:	the buffer to search
+ * @len:	the length of buffer to search
+ * @paglen:	the pagelength
+ * @td:		search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block
+ * tables and good / bad block identifiers.
+ * If the SCAN_EMPTY option is set then check, if all bytes except the
+ * pattern area contain 0xff
+ *
+*/
+static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
+{
+	int i, end;
+	uint8_t *p = buf;
+
+	end = paglen + td->offs;
+	if (td->options & NAND_BBT_SCANEMPTY) {
+		for (i = 0; i < end; i++) {
+			if (p[i] != 0xff)
+				return -1;
+		}
+	}	
+	p += end;
+	
+	/* Compare the pattern */
+	for (i = 0; i < td->len; i++) {
+		if (p[i] != td->pattern[i])
+			return -1;
+	}
+
+	p += td->len;
+	end += td->len;
+	if (td->options & NAND_BBT_SCANEMPTY) {
+		for (i = end; i < len; i++) {
+			if (*p++ != 0xff)
+				return -1;
+		}
+	}
+	return 0;
+}
+
+/**
+ * read_bbt - [GENERIC] Read the bad block table starting from page
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @page:	the starting page
+ * @num:	the number of bbt descriptors to read
+ * @bits:	number of bits per block
+ * @offs:	offset in the memory table
+ * @reserved_block_code:	Pattern to identify reserved blocks
+ *
+ * Read the bad block table starting from page.
+ *
+ */
+static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num, 
+	int bits, int offs, int reserved_block_code)
+{
+	int res, i, j, act = 0;
+	struct nand_chip *this = mtd->priv;
+	size_t retlen, len, totlen;
+	loff_t from;
+	uint8_t msk = (uint8_t) ((1 << bits) - 1);
+
+	totlen = (num * bits) >> 3;
+	from = ((loff_t)page) << this->page_shift;
+	
+	while (totlen) {
+		len = min (totlen, (size_t) (1 << this->bbt_erase_shift));
+		res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob);
+		if (res < 0) {
+			if (retlen != len) {
+				printk (KERN_INFO "nand_bbt: Error reading bad block table\n");
+				return res;
+			}
+			printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
+		}	
+
+		/* Analyse data */
+		for (i = 0; i < len; i++) {
+			uint8_t dat = buf[i];
+			for (j = 0; j < 8; j += bits, act += 2) {
+				uint8_t tmp = (dat >> j) & msk;
+				if (tmp == msk)
+					continue;
+				if (reserved_block_code &&
+				    (tmp == reserved_block_code)) {
+					printk (KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
+						((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+					this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
+					continue;
+				}
+				/* Leave it for now, if its matured we can move this
+				 * message to MTD_DEBUG_LEVEL0 */
+				printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
+					((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+				/* Factory marked bad or worn out ? */	
+				if (tmp == 0)
+					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
+				else
+					this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
+			}	
+		}
+		totlen -= len;
+		from += len;
+	}
+	return 0;
+}
+
+/**
+ * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @chip:	read the table for a specific chip, -1 read all chips.
+ *		Applies only if NAND_BBT_PERCHIP option is set
+ *
+ * Read the bad block table for all chips starting at a given page
+ * We assume that the bbt bits are in consecutive order.
+*/
+static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	int res = 0, i;
+	int bits;
+
+	bits = td->options & NAND_BBT_NRBITS_MSK;
+	if (td->options & NAND_BBT_PERCHIP) {
+		int offs = 0;
+		for (i = 0; i < this->numchips; i++) {
+			if (chip == -1 || chip == i)
+				res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code);
+			if (res)
+				return res;
+			offs += this->chipsize >> (this->bbt_erase_shift + 2);
+		}
+	} else {
+		res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code);
+		if (res)
+			return res;
+	}
+	return 0;
+}
+
+/**
+ * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @md:		descriptor for the bad block table mirror
+ *
+ * Read the bad block table(s) for all chips starting at a given page
+ * We assume that the bbt bits are in consecutive order.
+ *
+*/
+static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td,
+	struct nand_bbt_descr *md)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* Read the primary version, if available */	
+	if (td->options & NAND_BBT_VERSION) {
+		nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); 
+		td->version[0] = buf[mtd->oobblock + td->veroffs];
+		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]);
+	}
+
+	/* Read the mirror version, if available */	
+	if (md && (md->options & NAND_BBT_VERSION)) {
+		nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); 
+		md->version[0] = buf[mtd->oobblock + md->veroffs];
+		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]);
+	}
+
+	return 1;
+}
+
+/**
+ * create_bbt - [GENERIC] Create a bad block table by scanning the device
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @bd:		descriptor for the good/bad block search pattern
+ * @chip:	create the table for a specific chip, -1 read all chips.
+ *		Applies only if NAND_BBT_PERCHIP option is set
+ *
+ * Create a bad block table by scanning the device
+ * for the given good/bad block identify pattern
+ */
+static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, j, numblocks, len, scanlen;
+	int startblock;
+	loff_t from;
+	size_t readlen, ooblen;
+
+	printk (KERN_INFO "Scanning device for bad blocks\n");
+
+	if (bd->options & NAND_BBT_SCANALLPAGES)
+		len = 1 << (this->bbt_erase_shift - this->page_shift);
+	else {
+		if (bd->options & NAND_BBT_SCAN2NDPAGE)
+			len = 2;
+		else	
+			len = 1;
+	}
+	scanlen	= mtd->oobblock + mtd->oobsize;
+	readlen = len * mtd->oobblock;
+	ooblen = len * mtd->oobsize;
+
+	if (chip == -1) {
+		/* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it
+		 * makes shifting and masking less painful */
+		numblocks = mtd->size >> (this->bbt_erase_shift - 1);
+		startblock = 0;
+		from = 0;
+	} else {
+		if (chip >= this->numchips) {
+			printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+				chip + 1, this->numchips);
+			return;	
+		}
+		numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
+		startblock = chip * numblocks;
+		numblocks += startblock;
+		from = startblock << (this->bbt_erase_shift - 1);
+	}
+	
+	for (i = startblock; i < numblocks;) {
+		nand_read_raw (mtd, buf, from, readlen, ooblen);
+		for (j = 0; j < len; j++) {
+			if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+				this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+				printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", 
+					i >> 1, (unsigned int) from);
+				break;
+			}
+		}
+		i += 2;
+		from += (1 << this->bbt_erase_shift);
+	}
+}
+
+/**
+ * search_bbt - [GENERIC] scan the device for a specific bad block table
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table
+ *
+ * Read the bad block table by searching for a given ident pattern.
+ * Search is preformed either from the beginning up or from the end of 
+ * the device downwards. The search starts always at the start of a
+ * block.
+ * If the option NAND_BBT_PERCHIP is given, each chip is searched 
+ * for a bbt, which contains the bad block information of this chip.
+ * This is neccecary to provide support for certain DOC devices.
+ *
+ * The bbt ident pattern resides in the oob area of the first page 
+ * in a block. 
+ */
+static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, chips;
+	int bits, startblock, block, dir;
+	int scanlen = mtd->oobblock + mtd->oobsize;
+	int bbtblocks;
+
+	/* Search direction top -> down ? */
+	if (td->options & NAND_BBT_LASTBLOCK) {
+		startblock = (mtd->size >> this->bbt_erase_shift) -1;
+		dir = -1;
+	} else {
+		startblock = 0;	
+		dir = 1;
+	}	
+	
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		chips = this->numchips;
+		bbtblocks = this->chipsize >> this->bbt_erase_shift;
+		startblock &= bbtblocks - 1;
+	} else {
+		chips = 1;
+		bbtblocks = mtd->size >> this->bbt_erase_shift;
+	}
+	
+	/* Number of bits for each erase block in the bbt */
+	bits = td->options & NAND_BBT_NRBITS_MSK;
+	
+	for (i = 0; i < chips; i++) {
+		/* Reset version information */
+		td->version[i] = 0;	
+		td->pages[i] = -1;
+		/* Scan the maximum number of blocks */
+		for (block = 0; block < td->maxblocks; block++) {
+			int actblock = startblock + dir * block;
+			/* Read first page */
+			nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize); 
+			if (!check_pattern(buf, scanlen, mtd->oobblock, td)) {
+				td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift);
+				if (td->options & NAND_BBT_VERSION) {
+					td->version[i] = buf[mtd->oobblock + td->veroffs];
+				}
+				break;
+			}
+		}
+		startblock += this->chipsize >> this->bbt_erase_shift;
+	}
+	/* Check, if we found a bbt for each requested chip */
+	for (i = 0; i < chips; i++) {
+		if (td->pages[i] == -1)
+			printk (KERN_WARNING "Bad block table not found for chip %d\n", i);
+		else
+			printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]);
+	}
+	return 0;	
+}
+
+/**
+ * search_read_bbts - [GENERIC] scan the device for bad block table(s)
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @md:		descriptor for the bad block table mirror
+ *
+ * Search and read the bad block table(s)
+*/
+static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf, 
+	struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+{
+	/* Search the primary table */
+	search_bbt (mtd, buf, td);
+		
+	/* Search the mirror table */
+	if (md)
+		search_bbt (mtd, buf, md);
+	
+	/* Force result check */
+	return 1;	
+}
+	
+
+/** 
+ * write_bbt - [GENERIC] (Re)write the bad block table
+ *
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @md:		descriptor for the bad block table mirror
+ * @chipsel:	selector for a specific chip, -1 for all
+ *
+ * (Re)write the bad block table
+ *
+*/
+static int write_bbt (struct mtd_info *mtd, uint8_t *buf, 
+	struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel)
+{
+	struct nand_chip *this = mtd->priv;
+	struct nand_oobinfo oobinfo;
+	struct erase_info einfo;
+	int i, j, res, chip = 0;
+	int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
+	int nrchips, bbtoffs, pageoffs;
+	uint8_t msk[4];
+	uint8_t rcode = td->reserved_block_code;
+	size_t retlen, len = 0;
+	loff_t to;
+
+	if (!rcode)
+		rcode = 0xff;
+	/* Write bad block table per chip rather than per device ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		numblocks = (int) (this->chipsize >> this->bbt_erase_shift);
+		/* Full device write or specific chip ? */	
+		if (chipsel == -1) {
+			nrchips = this->numchips;
+		} else {
+			nrchips = chipsel + 1;
+			chip = chipsel;
+		}
+	} else {
+		numblocks = (int) (mtd->size >> this->bbt_erase_shift);
+		nrchips = 1;
+	}	
+	
+	/* Loop through the chips */
+	for (; chip < nrchips; chip++) {
+		
+		/* There was already a version of the table, reuse the page 
+		 * This applies for absolute placement too, as we have the 
+		 * page nr. in td->pages.
+		 */
+		if (td->pages[chip] != -1) {
+			page = td->pages[chip];
+			goto write;
+		}	
+
+		/* Automatic placement of the bad block table */
+		/* Search direction top -> down ? */
+		if (td->options & NAND_BBT_LASTBLOCK) {
+			startblock = numblocks * (chip + 1) - 1;
+			dir = -1;
+		} else {
+			startblock = chip * numblocks;
+			dir = 1;
+		}	
+
+		for (i = 0; i < td->maxblocks; i++) {
+			int block = startblock + dir * i;
+			/* Check, if the block is bad */
+			switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) {
+			case 0x01:
+			case 0x03:
+				continue;
+			}
+			page = block << (this->bbt_erase_shift - this->page_shift);
+			/* Check, if the block is used by the mirror table */
+			if (!md || md->pages[chip] != page)
+				goto write;
+		}
+		printk (KERN_ERR "No space left to write bad block table\n");
+		return -ENOSPC;
+write:	
+
+		/* Set up shift count and masks for the flash table */
+		bits = td->options & NAND_BBT_NRBITS_MSK;
+		switch (bits) {
+		case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break;
+		case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break;
+		case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break;
+		case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break;
+		default: return -EINVAL;
+		}
+		
+		bbtoffs = chip * (numblocks >> 2);
+		
+		to = ((loff_t) page) << this->page_shift;
+
+		memcpy (&oobinfo, this->autooob, sizeof(oobinfo));
+		oobinfo.useecc = MTD_NANDECC_PLACEONLY;
+		
+		/* Must we save the block contents ? */
+		if (td->options & NAND_BBT_SAVECONTENT) {
+			/* Make it block aligned */
+			to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+			len = 1 << this->bbt_erase_shift;
+			res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
+			if (res < 0) {
+				if (retlen != len) {
+					printk (KERN_INFO "nand_bbt: Error reading block for writing the bad block table\n");
+					return res;
+				}
+				printk (KERN_WARNING "nand_bbt: ECC error while reading block for writing bad block table\n");
+			}
+			/* Calc the byte offset in the buffer */
+			pageoffs = page - (int)(to >> this->page_shift);
+			offs = pageoffs << this->page_shift;
+			/* Preset the bbt area with 0xff */
+			memset (&buf[offs], 0xff, (size_t)(numblocks >> sft));
+			/* Preset the bbt's oob area with 0xff */
+			memset (&buf[len + pageoffs * mtd->oobsize], 0xff,
+				((len >> this->page_shift) - pageoffs) * mtd->oobsize);
+			if (td->options & NAND_BBT_VERSION) {
+				buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip];
+			}
+		} else {
+			/* Calc length */
+			len = (size_t) (numblocks >> sft);
+			/* Make it page aligned ! */
+			len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1);
+			/* Preset the buffer with 0xff */
+			memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize);
+			offs = 0;
+			/* Pattern is located in oob area of first page */
+			memcpy (&buf[len + td->offs], td->pattern, td->len);
+			if (td->options & NAND_BBT_VERSION) {
+				buf[len + td->veroffs] = td->version[chip];
+			}
+		}
+	
+		/* walk through the memory table */
+		for (i = 0; i < numblocks; ) {
+			uint8_t dat;
+			dat = this->bbt[bbtoffs + (i >> 2)];
+			for (j = 0; j < 4; j++ , i++) {
+				int sftcnt = (i << (3 - sft)) & sftmsk;
+				/* Do not store the reserved bbt blocks ! */
+				buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt);
+				dat >>= 2;
+			}
+		}
+		
+		memset (&einfo, 0, sizeof (einfo));
+		einfo.mtd = mtd;
+		einfo.addr = (unsigned long) to;
+		einfo.len = 1 << this->bbt_erase_shift;
+		res = nand_erase_nand (mtd, &einfo, 1);
+		if (res < 0) {
+			printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res);
+			return res;
+		}
+	
+		res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
+		if (res < 0) {
+			printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res);
+			return res;
+		}
+		printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n", 
+			(unsigned int) to, td->version[chip]);
+	
+		/* Mark it as used */
+		td->pages[chip] = page;
+	}	
+	return 0;
+}
+
+/**
+ * nand_memory_bbt - [GENERIC] create a memory based bad block table
+ * @mtd:	MTD device structure
+ * @bd:		descriptor for the good/bad block search pattern
+ *
+ * The function creates a memory based bbt by scanning the device 
+ * for manufacturer / software marked good / bad blocks
+*/
+static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* Ensure that we only scan for the pattern and nothing else */
+	bd->options = 0;
+	create_bbt (mtd, this->data_buf, bd, -1);
+	return 0;
+}
+
+/**
+ * check_create - [GENERIC] create and write bbt(s) if neccecary
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @bd:		descriptor for the good/bad block search pattern
+ *
+ * The function checks the results of the previous call to read_bbt
+ * and creates / updates the bbt(s) if neccecary
+ * Creation is neccecary if no bbt was found for the chip/device
+ * Update is neccecary if one of the tables is missing or the
+ * version nr. of one table is less than the other
+*/
+static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
+{
+	int i, chips, writeops, chipsel, res;
+	struct nand_chip *this = mtd->priv;
+	struct nand_bbt_descr *td = this->bbt_td;
+	struct nand_bbt_descr *md = this->bbt_md;
+	struct nand_bbt_descr *rd, *rd2;
+
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) 
+		chips = this->numchips;
+	else 
+		chips = 1;
+	
+	for (i = 0; i < chips; i++) {
+		writeops = 0;
+		rd = NULL;
+		rd2 = NULL;
+		/* Per chip or per device ? */
+		chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
+		/* Mirrored table avilable ? */
+		if (md) {
+			if (td->pages[i] == -1 && md->pages[i] == -1) {
+				writeops = 0x03;
+				goto create;
+			}
+
+			if (td->pages[i] == -1) {
+				rd = md;				
+				td->version[i] = md->version[i];
+				writeops = 1;
+				goto writecheck;
+			}
+
+			if (md->pages[i] == -1) {
+				rd = td;
+				md->version[i] = td->version[i];
+				writeops = 2;
+				goto writecheck;
+			}
+
+			if (td->version[i] == md->version[i]) {
+				rd = td;
+				if (!(td->options & NAND_BBT_VERSION))
+					rd2 = md;
+				goto writecheck;
+			}	
+
+			if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+				rd = td;
+				md->version[i] = td->version[i];
+				writeops = 2;
+			} else {
+				rd = md;
+				td->version[i] = md->version[i];
+				writeops = 1;
+			}
+
+			goto writecheck;
+
+		} else {
+			if (td->pages[i] == -1) {
+				writeops = 0x01;
+				goto create;
+			}
+			rd = td;
+			goto writecheck;
+		}
+create:
+		/* Create the bad block table by scanning the device ? */
+		if (!(td->options & NAND_BBT_CREATE))
+			continue;	
+		
+		/* Create the table in memory by scanning the chip(s) */
+		create_bbt (mtd, buf, bd, chipsel);
+		
+		td->version[i] = 1;
+		if (md)
+			md->version[i] = 1;	
+writecheck:	
+		/* read back first ? */
+		if (rd)
+			read_abs_bbt (mtd, buf, rd, chipsel);
+		/* If they weren't versioned, read both. */
+		if (rd2)
+			read_abs_bbt (mtd, buf, rd2, chipsel);
+
+		/* Write the bad block table to the device ? */
+		if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+			res = write_bbt (mtd, buf, td, md, chipsel);
+			if (res < 0)
+				return res;
+		}
+		
+		/* Write the mirror bad block table to the device ? */
+		if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+			res = write_bbt (mtd, buf, md, td, chipsel);
+			if (res < 0)
+				return res;
+		}
+	}
+	return 0;	
+}
+
+/**
+ * mark_bbt_regions - [GENERIC] mark the bad block table regions 
+ * @mtd:	MTD device structure
+ * @td:		bad block table descriptor
+ *
+ * The bad block table regions are marked as "bad" to prevent
+ * accidental erasures / writes. The regions are identified by
+ * the mark 0x02.
+*/
+static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, j, chips, block, nrblocks, update;
+	uint8_t oldval, newval;
+
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		chips = this->numchips;
+		nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+	} else {
+		chips = 1;
+		nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
+	}	
+	
+	for (i = 0; i < chips; i++) {
+		if ((td->options & NAND_BBT_ABSPAGE) ||
+		    !(td->options & NAND_BBT_WRITE)) {
+		    	if (td->pages[i] == -1) continue;
+			block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
+			block <<= 1;		
+			oldval = this->bbt[(block >> 3)];
+			newval = oldval | (0x2 << (block & 0x06));
+			this->bbt[(block >> 3)] = newval;
+			if ((oldval != newval) && td->reserved_block_code)
+				nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1));
+			continue;
+		}
+		update = 0;
+		if (td->options & NAND_BBT_LASTBLOCK)
+			block = ((i + 1) * nrblocks) - td->maxblocks;
+		else	
+			block = i * nrblocks;
+		block <<= 1;	
+		for (j = 0; j < td->maxblocks; j++) {
+			oldval = this->bbt[(block >> 3)];
+			newval = oldval | (0x2 << (block & 0x06));
+			this->bbt[(block >> 3)] = newval;
+			if (oldval != newval) update = 1;
+			block += 2;
+		}	
+		/* If we want reserved blocks to be recorded to flash, and some
+		   new ones have been marked, then we need to update the stored
+		   bbts.  This should only happen once. */
+		if (update && td->reserved_block_code)
+			nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1));
+	}
+}
+
+/**
+ * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
+ * @mtd:	MTD device structure
+ * @bd:		descriptor for the good/bad block search pattern
+ *
+ * The function checks, if a bad block table(s) is/are already 
+ * available. If not it scans the device for manufacturer
+ * marked good / bad blocks and writes the bad block table(s) to
+ * the selected place.
+ *
+ * The bad block table memory is allocated here. It must be freed
+ * by calling the nand_free_bbt function.
+ *
+*/
+int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+	struct nand_chip *this = mtd->priv;
+	int len, res = 0;
+	uint8_t *buf;
+	struct nand_bbt_descr *td = this->bbt_td;
+	struct nand_bbt_descr *md = this->bbt_md;
+
+	len = mtd->size >> (this->bbt_erase_shift + 2);
+	/* Allocate memory (2bit per block) */
+	this->bbt = kmalloc (len, GFP_KERNEL);
+	if (!this->bbt) {
+		printk (KERN_ERR "nand_scan_bbt: Out of memory\n");
+		return -ENOMEM;
+	}
+	/* Clear the memory bad block table */
+	memset (this->bbt, 0x00, len);
+
+	/* If no primary table decriptor is given, scan the device
+	 * to build a memory based bad block table
+	 */
+	if (!td)
+		return nand_memory_bbt(mtd, bd);
+
+	/* Allocate a temporary buffer for one eraseblock incl. oob */
+	len = (1 << this->bbt_erase_shift);
+	len += (len >> this->page_shift) * mtd->oobsize;
+	buf = kmalloc (len, GFP_KERNEL);
+	if (!buf) {
+		printk (KERN_ERR "nand_bbt: Out of memory\n");
+		kfree (this->bbt);
+		this->bbt = NULL;
+		return -ENOMEM;
+	}
+	
+	/* Is the bbt at a given page ? */
+	if (td->options & NAND_BBT_ABSPAGE) {
+		res = read_abs_bbts (mtd, buf, td, md);
+	} else {	
+		/* Search the bad block table using a pattern in oob */
+		res = search_read_bbts (mtd, buf, td, md);
+	}	
+
+	if (res) 
+		res = check_create (mtd, buf, bd);
+	
+	/* Prevent the bbt regions from erasing / writing */
+	mark_bbt_region (mtd, td);
+	if (md)
+		mark_bbt_region (mtd, md);
+	
+	kfree (buf);
+	return res;
+}
+
+
+/**
+ * nand_update_bbt - [NAND Interface] update bad block table(s) 
+ * @mtd:	MTD device structure
+ * @offs:	the offset of the newly marked block
+ *
+ * The function updates the bad block table(s)
+*/
+int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
+{
+	struct nand_chip *this = mtd->priv;
+	int len, res = 0, writeops = 0;
+	int chip, chipsel;
+	uint8_t *buf;
+	struct nand_bbt_descr *td = this->bbt_td;
+	struct nand_bbt_descr *md = this->bbt_md;
+
+	if (!this->bbt || !td)
+		return -EINVAL;
+
+	len = mtd->size >> (this->bbt_erase_shift + 2);
+	/* Allocate a temporary buffer for one eraseblock incl. oob */
+	len = (1 << this->bbt_erase_shift);
+	len += (len >> this->page_shift) * mtd->oobsize;
+	buf = kmalloc (len, GFP_KERNEL);
+	if (!buf) {
+		printk (KERN_ERR "nand_update_bbt: Out of memory\n");
+		return -ENOMEM;
+	}
+	
+	writeops = md != NULL ? 0x03 : 0x01;
+
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		chip = (int) (offs >> this->chip_shift);
+		chipsel = chip;
+	} else {
+		chip = 0;
+		chipsel = -1;
+	}
+
+	td->version[chip]++;
+	if (md)
+		md->version[chip]++;	
+
+	/* Write the bad block table to the device ? */
+	if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+		res = write_bbt (mtd, buf, td, md, chipsel);
+		if (res < 0)
+			goto out;
+	}
+	/* Write the mirror bad block table to the device ? */
+	if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+		res = write_bbt (mtd, buf, md, td, chipsel);
+	}
+
+out:	
+	kfree (buf);
+	return res;
+}
+
+/* Define some generic bad / good block scan pattern which are used 
+ * while scanning a device for factory marked good / bad blocks
+ * 
+ * The memory based patterns just 
+ */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr smallpage_memorybased = {
+	.options = 0,
+	.offs = 5,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_bbt_descr smallpage_flashbased = {
+	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+	.offs = 5,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_bbt_descr largepage_flashbased = {
+	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+	.offs = 0,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
+
+static struct nand_bbt_descr agand_flashbased = {
+	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+	.offs = 0x20,
+	.len = 6,
+	.pattern = scan_agand_pattern
+};
+
+/* Generic flash bbt decriptors
+*/
+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE 
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs =	8,
+	.len = 4,
+	.veroffs = 12,
+	.maxblocks = 4,
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE 
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs =	8,
+	.len = 4,
+	.veroffs = 12,
+	.maxblocks = 4,
+	.pattern = mirror_pattern
+};
+
+/**
+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device 
+ * @mtd:	MTD device structure
+ *
+ * This function selects the default bad block table
+ * support for the device and calls the nand_scan_bbt function
+ *
+*/
+int nand_default_bbt (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	
+	/* Default for AG-AND. We must use a flash based 
+	 * bad block table as the devices have factory marked
+	 * _good_ blocks. Erasing those blocks leads to loss
+	 * of the good / bad information, so we _must_ store
+	 * this information in a good / bad table during 
+	 * startup
+	*/
+	if (this->options & NAND_IS_AND) {
+		/* Use the default pattern descriptors */
+		if (!this->bbt_td) {	
+			this->bbt_td = &bbt_main_descr;
+			this->bbt_md = &bbt_mirror_descr;
+		}	
+		this->options |= NAND_USE_FLASH_BBT;
+		return nand_scan_bbt (mtd, &agand_flashbased);
+	}
+	
+	
+	/* Is a flash based bad block table requested ? */
+	if (this->options & NAND_USE_FLASH_BBT) {
+		/* Use the default pattern descriptors */	
+		if (!this->bbt_td) {	
+			this->bbt_td = &bbt_main_descr;
+			this->bbt_md = &bbt_mirror_descr;
+		}
+		if (!this->badblock_pattern) {
+			this->badblock_pattern = (mtd->oobblock > 512) ?
+				&largepage_flashbased : &smallpage_flashbased;
+		}
+	} else {
+		this->bbt_td = NULL;
+		this->bbt_md = NULL;
+		if (!this->badblock_pattern) {
+			this->badblock_pattern = (mtd->oobblock > 512) ?
+				&largepage_memorybased : &smallpage_memorybased;
+		}
+	}
+	return nand_scan_bbt (mtd, this->badblock_pattern);
+}
+
+/**
+ * nand_isbad_bbt - [NAND Interface] Check if a block is bad 
+ * @mtd:	MTD device structure
+ * @offs:	offset in the device
+ * @allowbbt:	allow access to bad block table region
+ *
+*/
+int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+	struct nand_chip *this = mtd->priv;
+	int block;
+	uint8_t	res;
+	
+	/* Get block number * 2 */
+	block = (int) (offs >> (this->bbt_erase_shift - 1));
+	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
+
+	DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", 
+		(unsigned int)offs, res, block >> 1);
+
+	switch ((int)res) {
+	case 0x00:	return 0;
+	case 0x01:	return 1;
+	case 0x02:	return allowbbt ? 0 : 1;
+	}
+	return 1;
+}
+
+EXPORT_SYMBOL (nand_scan_bbt);
+EXPORT_SYMBOL (nand_default_bbt);
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
new file mode 100644
index 000000000000..2e341b75437a
--- /dev/null
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -0,0 +1,250 @@
+/*
+ * This file contains an ECC algorithm from Toshiba that detects and
+ * corrects 1 bit errors in a 256 byte block of data.
+ *
+ * drivers/mtd/nand/nand_ecc.c
+ *
+ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
+ *                         Toshiba America Electronics Components, Inc.
+ *
+ * $Id: nand_ecc.c,v 1.14 2004/06/16 15:34:37 gleixner Exp $
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ * 
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this file; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * 
+ * As a special exception, if other files instantiate templates or use
+ * macros or inline functions from these files, or you compile these
+ * files and link them with other works to produce a work based on these
+ * files, these files do not by themselves cause the resulting work to be
+ * covered by the GNU General Public License. However the source code for
+ * these files must still be made available in accordance with section (3)
+ * of the GNU General Public License.
+ * 
+ * This exception does not invalidate any other reasons why a work based on
+ * this file might be covered by the GNU General Public License.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/nand_ecc.h>
+
+/*
+ * Pre-calculated 256-way 1 byte column parity
+ */
+static const u_char nand_ecc_precalc_table[] = {
+	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
+	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+};
+
+
+/**
+ * nand_trans_result - [GENERIC] create non-inverted ECC
+ * @reg2:	line parity reg 2
+ * @reg3:	line parity reg 3
+ * @ecc_code:	ecc 
+ *
+ * Creates non-inverted ECC code from line parity
+ */
+static void nand_trans_result(u_char reg2, u_char reg3,
+	u_char *ecc_code)
+{
+	u_char a, b, i, tmp1, tmp2;
+	
+	/* Initialize variables */
+	a = b = 0x80;
+	tmp1 = tmp2 = 0;
+	
+	/* Calculate first ECC byte */
+	for (i = 0; i < 4; i++) {
+		if (reg3 & a)		/* LP15,13,11,9 --> ecc_code[0] */
+			tmp1 |= b;
+		b >>= 1;
+		if (reg2 & a)		/* LP14,12,10,8 --> ecc_code[0] */
+			tmp1 |= b;
+		b >>= 1;
+		a >>= 1;
+	}
+	
+	/* Calculate second ECC byte */
+	b = 0x80;
+	for (i = 0; i < 4; i++) {
+		if (reg3 & a)		/* LP7,5,3,1 --> ecc_code[1] */
+			tmp2 |= b;
+		b >>= 1;
+		if (reg2 & a)		/* LP6,4,2,0 --> ecc_code[1] */
+			tmp2 |= b;
+		b >>= 1;
+		a >>= 1;
+	}
+	
+	/* Store two of the ECC bytes */
+	ecc_code[0] = tmp1;
+	ecc_code[1] = tmp2;
+}
+
+/**
+ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
+ * @mtd:	MTD block structure
+ * @dat:	raw data
+ * @ecc_code:	buffer for ECC
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	u_char idx, reg1, reg2, reg3;
+	int j;
+	
+	/* Initialize variables */
+	reg1 = reg2 = reg3 = 0;
+	ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
+	
+	/* Build up column parity */ 
+	for(j = 0; j < 256; j++) {
+		
+		/* Get CP0 - CP5 from table */
+		idx = nand_ecc_precalc_table[dat[j]];
+		reg1 ^= (idx & 0x3f);
+		
+		/* All bit XOR = 1 ? */
+		if (idx & 0x40) {
+			reg3 ^= (u_char) j;
+			reg2 ^= ~((u_char) j);
+		}
+	}
+	
+	/* Create non-inverted ECC code from line parity */
+	nand_trans_result(reg2, reg3, ecc_code);
+	
+	/* Calculate final ECC code */
+	ecc_code[0] = ~ecc_code[0];
+	ecc_code[1] = ~ecc_code[1];
+	ecc_code[2] = ((~reg1) << 2) | 0x03;
+	return 0;
+}
+
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd:	MTD block structure
+ * @dat:	raw data read from the chip
+ * @read_ecc:	ECC from the chip
+ * @calc_ecc:	the ECC calculated from raw data
+ *
+ * Detect and correct a 1 bit error for 256 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+{
+	u_char a, b, c, d1, d2, d3, add, bit, i;
+	
+	/* Do error detection */ 
+	d1 = calc_ecc[0] ^ read_ecc[0];
+	d2 = calc_ecc[1] ^ read_ecc[1];
+	d3 = calc_ecc[2] ^ read_ecc[2];
+	
+	if ((d1 | d2 | d3) == 0) {
+		/* No errors */
+		return 0;
+	}
+	else {
+		a = (d1 ^ (d1 >> 1)) & 0x55;
+		b = (d2 ^ (d2 >> 1)) & 0x55;
+		c = (d3 ^ (d3 >> 1)) & 0x54;
+		
+		/* Found and will correct single bit error in the data */
+		if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
+			c = 0x80;
+			add = 0;
+			a = 0x80;
+			for (i=0; i<4; i++) {
+				if (d1 & c)
+					add |= a;
+				c >>= 2;
+				a >>= 1;
+			}
+			c = 0x80;
+			for (i=0; i<4; i++) {
+				if (d2 & c)
+					add |= a;
+				c >>= 2;
+				a >>= 1;
+			}
+			bit = 0;
+			b = 0x04;
+			c = 0x80;
+			for (i=0; i<3; i++) {
+				if (d3 & c)
+					bit |= b;
+				c >>= 2;
+				b >>= 1;
+			}
+			b = 0x01;
+			a = dat[add];
+			a ^= (b << bit);
+			dat[add] = a;
+			return 1;
+		}
+		else {
+			i = 0;
+			while (d1) {
+				if (d1 & 0x01)
+					++i;
+				d1 >>= 1;
+			}
+			while (d2) {
+				if (d2 & 0x01)
+					++i;
+				d2 >>= 1;
+			}
+			while (d3) {
+				if (d3 & 0x01)
+					++i;
+				d3 >>= 1;
+			}
+			if (i == 1) {
+				/* ECC Code Error Correction */
+				read_ecc[0] = calc_ecc[0];
+				read_ecc[1] = calc_ecc[1];
+				read_ecc[2] = calc_ecc[2];
+				return 2;
+			}
+			else {
+				/* Uncorrectable Error */
+				return -1;
+			}
+		}
+	}
+	
+	/* Should never happen */
+	return -1;
+}
+
+EXPORT_SYMBOL(nand_calculate_ecc);
+EXPORT_SYMBOL(nand_correct_data);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_DESCRIPTION("Generic NAND ECC support");
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
new file mode 100644
index 000000000000..2d8c4321275b
--- /dev/null
+++ b/drivers/mtd/nand/nand_ids.c
@@ -0,0 +1,129 @@
+/*
+ *  drivers/mtd/nandids.c
+ *
+ *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
+  *
+ * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+/*
+*	Chip ID list
+*	
+*	Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
+*	options
+* 
+* 	Pagesize; 0, 256, 512
+*	0 	get this information from the extended chip ID
++	256	256 Byte page size
+*	512	512 Byte page size	
+*/
+struct nand_flash_dev nand_flash_ids[] = {
+	{"NAND 1MiB 5V 8-bit", 		0x6e, 256, 1, 0x1000, 0},
+	{"NAND 2MiB 5V 8-bit", 		0x64, 256, 2, 0x1000, 0},
+	{"NAND 4MiB 5V 8-bit", 		0x6b, 512, 4, 0x2000, 0},
+	{"NAND 1MiB 3,3V 8-bit", 	0xe8, 256, 1, 0x1000, 0},
+	{"NAND 1MiB 3,3V 8-bit", 	0xec, 256, 1, 0x1000, 0},
+	{"NAND 2MiB 3,3V 8-bit", 	0xea, 256, 2, 0x1000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xd5, 512, 4, 0x2000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xe3, 512, 4, 0x2000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xe5, 512, 4, 0x2000, 0},
+	{"NAND 8MiB 3,3V 8-bit", 	0xd6, 512, 8, 0x2000, 0},
+	
+	{"NAND 8MiB 1,8V 8-bit", 	0x39, 512, 8, 0x2000, 0},
+	{"NAND 8MiB 3,3V 8-bit", 	0xe6, 512, 8, 0x2000, 0},
+	{"NAND 8MiB 1,8V 16-bit", 	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+	{"NAND 8MiB 3,3V 16-bit", 	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+	
+	{"NAND 16MiB 1,8V 8-bit", 	0x33, 512, 16, 0x4000, 0},
+	{"NAND 16MiB 3,3V 8-bit", 	0x73, 512, 16, 0x4000, 0},
+	{"NAND 16MiB 1,8V 16-bit", 	0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 16MiB 3,3V 16-bit", 	0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 32MiB 1,8V 8-bit", 	0x35, 512, 32, 0x4000, 0},
+	{"NAND 32MiB 3,3V 8-bit", 	0x75, 512, 32, 0x4000, 0},
+	{"NAND 32MiB 1,8V 16-bit", 	0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 32MiB 3,3V 16-bit", 	0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 64MiB 1,8V 8-bit", 	0x36, 512, 64, 0x4000, 0},
+	{"NAND 64MiB 3,3V 8-bit", 	0x76, 512, 64, 0x4000, 0},
+	{"NAND 64MiB 1,8V 16-bit", 	0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 64MiB 3,3V 16-bit", 	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 128MiB 1,8V 8-bit", 	0x78, 512, 128, 0x4000, 0},
+	{"NAND 128MiB 3,3V 8-bit", 	0x79, 512, 128, 0x4000, 0},
+	{"NAND 128MiB 1,8V 16-bit", 	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 128MiB 3,3V 16-bit", 	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 256MiB 3,3V 8-bit", 	0x71, 512, 256, 0x4000, 0},
+
+	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
+	
+	/* These are the new chips with large page size. The pagesize
+	* and the erasesize is determined from the extended id bytes
+	*/
+	/* 1 Gigabit */
+	{"NAND 128MiB 1,8V 8-bit", 	0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 3,3V 8-bit", 	0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 1,8V 16-bit", 	0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 3,3V 16-bit", 	0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* 2 Gigabit */
+	{"NAND 256MiB 1,8V 8-bit", 	0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 3,3V 8-bit", 	0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 1,8V 16-bit", 	0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 3,3V 16-bit", 	0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	
+	/* 4 Gigabit */
+	{"NAND 512MiB 1,8V 8-bit", 	0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 1,8V 16-bit", 	0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 3,3V 16-bit", 	0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	
+	/* 8 Gigabit */
+	{"NAND 1GiB 1,8V 8-bit", 	0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 3,3V 8-bit", 	0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 1,8V 16-bit", 	0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 3,3V 16-bit", 	0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* 16 Gigabit */
+	{"NAND 2GiB 1,8V 8-bit", 	0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 3,3V 8-bit", 	0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 1,8V 16-bit", 	0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 3,3V 16-bit", 	0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! 
+	 * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
+	 * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
+	 * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
+	 * There are more speed improvements for reads and writes possible, but not implemented now 
+	 */
+	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY},
+
+	{NULL,}
+};
+
+/*
+*	Manufacturer ID list
+*/
+struct nand_manufacturers nand_manuf_ids[] = {
+	{NAND_MFR_TOSHIBA, "Toshiba"},
+	{NAND_MFR_SAMSUNG, "Samsung"},
+	{NAND_MFR_FUJITSU, "Fujitsu"},
+	{NAND_MFR_NATIONAL, "National"},
+	{NAND_MFR_RENESAS, "Renesas"},
+	{NAND_MFR_STMICRO, "ST Micro"},
+	{0x0, "Unknown"}
+};
+
+EXPORT_SYMBOL (nand_manuf_ids);
+EXPORT_SYMBOL (nand_flash_ids);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR ("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION ("Nand device & manufacturer ID's");
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
new file mode 100644
index 000000000000..13feefd7d8ca
--- /dev/null
+++ b/drivers/mtd/nand/nandsim.c
@@ -0,0 +1,1613 @@
+/*
+ * NAND flash simulator.
+ *
+ * Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org>
+ *
+ * Copyright (C) 2004 Nokia Corporation 
+ *
+ * Note: NS means "NAND Simulator".
+ * Note: Input means input TO flash chip, output means output FROM chip.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any later
+ * version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ *
+ * $Id: nandsim.c,v 1.7 2004/12/06 11:53:06 dedekind Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#ifdef CONFIG_NS_ABS_POS
+#include <asm/io.h>
+#endif
+
+
+/* Default simulator parameters values */
+#if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
+    !defined(CONFIG_NANDSIM_SECOND_ID_BYTE) || \
+    !defined(CONFIG_NANDSIM_THIRD_ID_BYTE)  || \
+    !defined(CONFIG_NANDSIM_FOURTH_ID_BYTE)
+#define CONFIG_NANDSIM_FIRST_ID_BYTE  0x98
+#define CONFIG_NANDSIM_SECOND_ID_BYTE 0x39
+#define CONFIG_NANDSIM_THIRD_ID_BYTE  0xFF /* No byte */
+#define CONFIG_NANDSIM_FOURTH_ID_BYTE 0xFF /* No byte */
+#endif
+
+#ifndef CONFIG_NANDSIM_ACCESS_DELAY
+#define CONFIG_NANDSIM_ACCESS_DELAY 25
+#endif
+#ifndef CONFIG_NANDSIM_PROGRAMM_DELAY
+#define CONFIG_NANDSIM_PROGRAMM_DELAY 200
+#endif
+#ifndef CONFIG_NANDSIM_ERASE_DELAY
+#define CONFIG_NANDSIM_ERASE_DELAY 2
+#endif
+#ifndef CONFIG_NANDSIM_OUTPUT_CYCLE
+#define CONFIG_NANDSIM_OUTPUT_CYCLE 40
+#endif
+#ifndef CONFIG_NANDSIM_INPUT_CYCLE
+#define CONFIG_NANDSIM_INPUT_CYCLE  50
+#endif
+#ifndef CONFIG_NANDSIM_BUS_WIDTH
+#define CONFIG_NANDSIM_BUS_WIDTH  8
+#endif
+#ifndef CONFIG_NANDSIM_DO_DELAYS
+#define CONFIG_NANDSIM_DO_DELAYS  0
+#endif
+#ifndef CONFIG_NANDSIM_LOG
+#define CONFIG_NANDSIM_LOG        0
+#endif
+#ifndef CONFIG_NANDSIM_DBG
+#define CONFIG_NANDSIM_DBG        0
+#endif
+
+static uint first_id_byte  = CONFIG_NANDSIM_FIRST_ID_BYTE;
+static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE;
+static uint third_id_byte  = CONFIG_NANDSIM_THIRD_ID_BYTE;
+static uint fourth_id_byte = CONFIG_NANDSIM_FOURTH_ID_BYTE;
+static uint access_delay   = CONFIG_NANDSIM_ACCESS_DELAY;
+static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY;
+static uint erase_delay    = CONFIG_NANDSIM_ERASE_DELAY;
+static uint output_cycle   = CONFIG_NANDSIM_OUTPUT_CYCLE;
+static uint input_cycle    = CONFIG_NANDSIM_INPUT_CYCLE;
+static uint bus_width      = CONFIG_NANDSIM_BUS_WIDTH;
+static uint do_delays      = CONFIG_NANDSIM_DO_DELAYS;
+static uint log            = CONFIG_NANDSIM_LOG;
+static uint dbg            = CONFIG_NANDSIM_DBG;
+
+module_param(first_id_byte,  uint, 0400);
+module_param(second_id_byte, uint, 0400);
+module_param(third_id_byte,  uint, 0400);
+module_param(fourth_id_byte, uint, 0400);
+module_param(access_delay,   uint, 0400);
+module_param(programm_delay, uint, 0400);
+module_param(erase_delay,    uint, 0400);
+module_param(output_cycle,   uint, 0400);
+module_param(input_cycle,    uint, 0400);
+module_param(bus_width,      uint, 0400);
+module_param(do_delays,      uint, 0400);
+module_param(log,            uint, 0400);
+module_param(dbg,            uint, 0400);
+
+MODULE_PARM_DESC(first_id_byte,  "The fist byte returned by NAND Flash 'read ID' command (manufaturer ID)");
+MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
+MODULE_PARM_DESC(third_id_byte,  "The third byte returned by NAND Flash 'read ID' command");
+MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command");
+MODULE_PARM_DESC(access_delay,   "Initial page access delay (microiseconds)");
+MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
+MODULE_PARM_DESC(erase_delay,    "Sector erase delay (milliseconds)");
+MODULE_PARM_DESC(output_cycle,   "Word output (from flash) time (nanodeconds)");
+MODULE_PARM_DESC(input_cycle,    "Word input (to flash) time (nanodeconds)");
+MODULE_PARM_DESC(bus_width,      "Chip's bus width (8- or 16-bit)");
+MODULE_PARM_DESC(do_delays,      "Simulate NAND delays using busy-waits if not zero");
+MODULE_PARM_DESC(log,            "Perform logging if not zero");
+MODULE_PARM_DESC(dbg,            "Output debug information if not zero");
+
+/* The largest possible page size */
+#define NS_LARGEST_PAGE_SIZE	2048
+	
+/* The prefix for simulator output */
+#define NS_OUTPUT_PREFIX "[nandsim]"
+
+/* Simulator's output macros (logging, debugging, warning, error) */
+#define NS_LOG(args...) \
+	do { if (log) printk(KERN_DEBUG NS_OUTPUT_PREFIX " log: " args); } while(0)
+#define NS_DBG(args...) \
+	do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug: " args); } while(0)
+#define NS_WARN(args...) \
+	do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warnig: " args); } while(0)
+#define NS_ERR(args...) \
+	do { printk(KERN_ERR NS_OUTPUT_PREFIX " errorr: " args); } while(0)
+
+/* Busy-wait delay macros (microseconds, milliseconds) */
+#define NS_UDELAY(us) \
+        do { if (do_delays) udelay(us); } while(0)
+#define NS_MDELAY(us) \
+        do { if (do_delays) mdelay(us); } while(0)
+	
+/* Is the nandsim structure initialized ? */
+#define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0)
+
+/* Good operation completion status */
+#define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0)))
+
+/* Operation failed completion status */
+#define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns)) 
+
+/* Calculate the page offset in flash RAM image by (row, column) address */
+#define NS_RAW_OFFSET(ns) \
+	(((ns)->regs.row << (ns)->geom.pgshift) + ((ns)->regs.row * (ns)->geom.oobsz) + (ns)->regs.column)
+	
+/* Calculate the OOB offset in flash RAM image by (row, column) address */
+#define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
+
+/* After a command is input, the simulator goes to one of the following states */
+#define STATE_CMD_READ0        0x00000001 /* read data from the beginning of page */
+#define STATE_CMD_READ1        0x00000002 /* read data from the second half of page */
+#define STATE_CMD_READSTART      0x00000003 /* read data second command (large page devices) */
+#define STATE_CMD_PAGEPROG     0x00000004 /* start page programm */
+#define STATE_CMD_READOOB      0x00000005 /* read OOB area */
+#define STATE_CMD_ERASE1       0x00000006 /* sector erase first command */
+#define STATE_CMD_STATUS       0x00000007 /* read status */
+#define STATE_CMD_STATUS_M     0x00000008 /* read multi-plane status (isn't implemented) */
+#define STATE_CMD_SEQIN        0x00000009 /* sequential data imput */
+#define STATE_CMD_READID       0x0000000A /* read ID */
+#define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
+#define STATE_CMD_RESET        0x0000000C /* reset */
+#define STATE_CMD_MASK         0x0000000F /* command states mask */
+
+/* After an addres is input, the simulator goes to one of these states */
+#define STATE_ADDR_PAGE        0x00000010 /* full (row, column) address is accepted */
+#define STATE_ADDR_SEC         0x00000020 /* sector address was accepted */
+#define STATE_ADDR_ZERO        0x00000030 /* one byte zero address was accepted */
+#define STATE_ADDR_MASK        0x00000030 /* address states mask */
+
+/* Durind data input/output the simulator is in these states */
+#define STATE_DATAIN           0x00000100 /* waiting for data input */
+#define STATE_DATAIN_MASK      0x00000100 /* data input states mask */
+
+#define STATE_DATAOUT          0x00001000 /* waiting for page data output */
+#define STATE_DATAOUT_ID       0x00002000 /* waiting for ID bytes output */
+#define STATE_DATAOUT_STATUS   0x00003000 /* waiting for status output */
+#define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */
+#define STATE_DATAOUT_MASK     0x00007000 /* data output states mask */
+
+/* Previous operation is done, ready to accept new requests */
+#define STATE_READY            0x00000000
+
+/* This state is used to mark that the next state isn't known yet */
+#define STATE_UNKNOWN          0x10000000
+
+/* Simulator's actions bit masks */
+#define ACTION_CPY       0x00100000 /* copy page/OOB to the internal buffer */
+#define ACTION_PRGPAGE   0x00200000 /* programm the internal buffer to flash */
+#define ACTION_SECERASE  0x00300000 /* erase sector */
+#define ACTION_ZEROOFF   0x00400000 /* don't add any offset to address */
+#define ACTION_HALFOFF   0x00500000 /* add to address half of page */
+#define ACTION_OOBOFF    0x00600000 /* add to address OOB offset */
+#define ACTION_MASK      0x00700000 /* action mask */
+
+#define NS_OPER_NUM      12 /* Number of operations supported by the simulator */
+#define NS_OPER_STATES   6  /* Maximum number of states in operation */
+
+#define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
+#define OPT_PAGE256      0x00000001 /* 256-byte  page chips */
+#define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
+#define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
+#define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
+#define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is possible */
+#define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
+#define OPT_LARGEPAGE    (OPT_PAGE2048) /* 2048-byte page chips */
+#define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte page chips */
+
+/* Remove action bits ftom state */
+#define NS_STATE(x) ((x) & ~ACTION_MASK)
+	
+/* 
+ * Maximum previous states which need to be saved. Currently saving is
+ * only needed for page programm operation with preceeded read command
+ * (which is only valid for 512-byte pages).
+ */
+#define NS_MAX_PREVSTATES 1
+
+/* 
+ * The structure which describes all the internal simulator data.
+ */
+struct nandsim {
+	struct mtd_partition part;
+
+	uint busw;              /* flash chip bus width (8 or 16) */
+	u_char ids[4];          /* chip's ID bytes */
+	uint32_t options;       /* chip's characteristic bits */
+	uint32_t state;         /* current chip state */
+	uint32_t nxstate;       /* next expected state */
+	
+	uint32_t *op;           /* current operation, NULL operations isn't known yet  */
+	uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */
+	uint16_t npstates;      /* number of previous states saved */
+	uint16_t stateidx;      /* current state index */
+
+	/* The simulated NAND flash image */
+	union flash_media {
+		u_char *byte;
+		uint16_t    *word;
+	} mem;
+
+	/* Internal buffer of page + OOB size bytes */
+	union internal_buffer {
+		u_char *byte;    /* for byte access */
+		uint16_t *word;  /* for 16-bit word access */
+	} buf;
+
+	/* NAND flash "geometry" */
+	struct nandsin_geometry {
+		uint32_t totsz;     /* total flash size, bytes */
+		uint32_t secsz;     /* flash sector (erase block) size, bytes */
+		uint pgsz;          /* NAND flash page size, bytes */
+		uint oobsz;         /* page OOB area size, bytes */
+		uint32_t totszoob;  /* total flash size including OOB, bytes */
+		uint pgszoob;       /* page size including OOB , bytes*/
+		uint secszoob;      /* sector size including OOB, bytes */
+		uint pgnum;         /* total number of pages */
+		uint pgsec;         /* number of pages per sector */
+		uint secshift;      /* bits number in sector size */
+		uint pgshift;       /* bits number in page size */
+		uint oobshift;      /* bits number in OOB size */
+		uint pgaddrbytes;   /* bytes per page address */
+		uint secaddrbytes;  /* bytes per sector address */
+		uint idbytes;       /* the number ID bytes that this chip outputs */
+	} geom;
+
+	/* NAND flash internal registers */
+	struct nandsim_regs {
+		unsigned command; /* the command register */
+		u_char   status;  /* the status register */
+		uint     row;     /* the page number */
+		uint     column;  /* the offset within page */
+		uint     count;   /* internal counter */
+		uint     num;     /* number of bytes which must be processed */
+		uint     off;     /* fixed page offset */
+	} regs;
+
+	/* NAND flash lines state */
+        struct ns_lines_status {
+                int ce;  /* chip Enable */
+                int cle; /* command Latch Enable */
+                int ale; /* address Latch Enable */
+                int wp;  /* write Protect */
+        } lines;
+};
+
+/*
+ * Operations array. To perform any operation the simulator must pass
+ * through the correspondent states chain.
+ */
+static struct nandsim_operations {
+	uint32_t reqopts;  /* options which are required to perform the operation */
+	uint32_t states[NS_OPER_STATES]; /* operation's states */
+} ops[NS_OPER_NUM] = {
+	/* Read page + OOB from the beginning */
+	{OPT_SMALLPAGE, {STATE_CMD_READ0 | ACTION_ZEROOFF, STATE_ADDR_PAGE | ACTION_CPY,
+			STATE_DATAOUT, STATE_READY}},
+	/* Read page + OOB from the second half */
+	{OPT_PAGE512_8BIT, {STATE_CMD_READ1 | ACTION_HALFOFF, STATE_ADDR_PAGE | ACTION_CPY,
+			STATE_DATAOUT, STATE_READY}},
+	/* Read OOB */
+	{OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
+			STATE_DATAOUT, STATE_READY}},
+	/* Programm page starting from the beginning */
+	{OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
+			STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+	/* Programm page starting from the beginning */
+	{OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
+			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+	/* Programm page starting from the second half */
+	{OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
+			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+	/* Programm OOB */
+	{OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
+			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+	/* Erase sector */
+	{OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}},
+	/* Read status */
+	{OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}},
+	/* Read multi-plane status */
+	{OPT_SMARTMEDIA, {STATE_CMD_STATUS_M, STATE_DATAOUT_STATUS_M, STATE_READY}},
+	/* Read ID */
+	{OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
+	/* Large page devices read page */
+	{OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
+			       STATE_DATAOUT, STATE_READY}}
+};
+
+/* MTD structure for NAND controller */
+static struct mtd_info *nsmtd;
+
+static u_char ns_verify_buf[NS_LARGEST_PAGE_SIZE];
+
+/*
+ * Initialize the nandsim structure.
+ *
+ * RETURNS: 0 if success, -ERRNO if failure.
+ */
+static int
+init_nandsim(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
+	int i;
+
+	if (NS_IS_INITIALIZED(ns)) {
+		NS_ERR("init_nandsim: nandsim is already initialized\n");
+		return -EIO;
+	}
+
+	/* Force mtd to not do delays */
+	chip->chip_delay = 0;
+
+	/* Initialize the NAND flash parameters */
+	ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
+	ns->geom.totsz    = mtd->size;
+	ns->geom.pgsz     = mtd->oobblock;
+	ns->geom.oobsz    = mtd->oobsize;
+	ns->geom.secsz    = mtd->erasesize;
+	ns->geom.pgszoob  = ns->geom.pgsz + ns->geom.oobsz;
+	ns->geom.pgnum    = ns->geom.totsz / ns->geom.pgsz;
+	ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz;
+	ns->geom.secshift = ffs(ns->geom.secsz) - 1;
+	ns->geom.pgshift  = chip->page_shift;
+	ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
+	ns->geom.pgsec    = ns->geom.secsz / ns->geom.pgsz;
+	ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec;
+	ns->options = 0;
+
+	if (ns->geom.pgsz == 256) {
+		ns->options |= OPT_PAGE256;
+	}
+	else if (ns->geom.pgsz == 512) {
+		ns->options |= (OPT_PAGE512 | OPT_AUTOINCR);
+		if (ns->busw == 8)
+			ns->options |= OPT_PAGE512_8BIT;
+	} else if (ns->geom.pgsz == 2048) {
+		ns->options |= OPT_PAGE2048;
+	} else {
+		NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
+		return -EIO;
+	}
+
+	if (ns->options & OPT_SMALLPAGE) {
+		if (ns->geom.totsz < (64 << 20)) {
+			ns->geom.pgaddrbytes  = 3;
+			ns->geom.secaddrbytes = 2;
+		} else {
+			ns->geom.pgaddrbytes  = 4;
+			ns->geom.secaddrbytes = 3;
+		}
+	} else {
+		if (ns->geom.totsz <= (128 << 20)) {
+			ns->geom.pgaddrbytes  = 5;
+			ns->geom.secaddrbytes = 2;
+		} else {
+			ns->geom.pgaddrbytes  = 5;
+			ns->geom.secaddrbytes = 3;
+		}
+	}
+	
+	/* Detect how many ID bytes the NAND chip outputs */
+        for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+                if (second_id_byte != nand_flash_ids[i].id)
+                        continue;
+		if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR))
+			ns->options |= OPT_AUTOINCR;
+	}
+
+	if (ns->busw == 16)
+		NS_WARN("16-bit flashes support wasn't tested\n");
+
+	printk("flash size: %u MiB\n",          ns->geom.totsz >> 20);
+	printk("page size: %u bytes\n",         ns->geom.pgsz);
+	printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
+	printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
+	printk("pages number: %u\n",            ns->geom.pgnum);
+	printk("pages per sector: %u\n",        ns->geom.pgsec);
+	printk("bus width: %u\n",               ns->busw);
+	printk("bits in sector size: %u\n",     ns->geom.secshift);
+	printk("bits in page size: %u\n",       ns->geom.pgshift);
+	printk("bits in OOB size: %u\n",        ns->geom.oobshift);
+	printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10);
+	printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
+	printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
+	printk("options: %#x\n",                ns->options);
+
+	/* Map / allocate and initialize the flash image */
+#ifdef CONFIG_NS_ABS_POS
+	ns->mem.byte = ioremap(CONFIG_NS_ABS_POS, ns->geom.totszoob);
+	if (!ns->mem.byte) {
+		NS_ERR("init_nandsim: failed to map the NAND flash image at address %p\n", 
+			(void *)CONFIG_NS_ABS_POS);
+		return -ENOMEM;
+	}
+#else
+	ns->mem.byte = vmalloc(ns->geom.totszoob);
+	if (!ns->mem.byte) {
+		NS_ERR("init_nandsim: unable to allocate %u bytes for flash image\n",
+			ns->geom.totszoob);
+		return -ENOMEM;
+	}
+	memset(ns->mem.byte, 0xFF, ns->geom.totszoob);
+#endif
+
+	/* Allocate / initialize the internal buffer */
+	ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
+	if (!ns->buf.byte) {
+		NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
+			ns->geom.pgszoob);
+		goto error;
+	}
+	memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
+
+	/* Fill the partition_info structure */
+	ns->part.name   = "NAND simulator partition";
+	ns->part.offset = 0;
+	ns->part.size   = ns->geom.totsz;
+
+	return 0;
+
+error:
+#ifdef CONFIG_NS_ABS_POS
+	iounmap(ns->mem.byte);
+#else
+	vfree(ns->mem.byte);
+#endif
+
+	return -ENOMEM;
+}
+
+/*
+ * Free the nandsim structure.
+ */
+static void
+free_nandsim(struct nandsim *ns)
+{
+	kfree(ns->buf.byte);
+
+#ifdef CONFIG_NS_ABS_POS
+	iounmap(ns->mem.byte);
+#else
+	vfree(ns->mem.byte);
+#endif
+
+	return;
+}
+
+/*
+ * Returns the string representation of 'state' state.
+ */
+static char *
+get_state_name(uint32_t state)
+{
+	switch (NS_STATE(state)) {
+		case STATE_CMD_READ0:
+			return "STATE_CMD_READ0";
+		case STATE_CMD_READ1:
+			return "STATE_CMD_READ1";
+		case STATE_CMD_PAGEPROG:
+			return "STATE_CMD_PAGEPROG";
+		case STATE_CMD_READOOB:
+			return "STATE_CMD_READOOB";
+		case STATE_CMD_READSTART:
+			return "STATE_CMD_READSTART";
+		case STATE_CMD_ERASE1:
+			return "STATE_CMD_ERASE1";
+		case STATE_CMD_STATUS:
+			return "STATE_CMD_STATUS";
+		case STATE_CMD_STATUS_M:
+			return "STATE_CMD_STATUS_M";
+		case STATE_CMD_SEQIN:
+			return "STATE_CMD_SEQIN";
+		case STATE_CMD_READID:
+			return "STATE_CMD_READID";
+		case STATE_CMD_ERASE2:
+			return "STATE_CMD_ERASE2";
+		case STATE_CMD_RESET:
+			return "STATE_CMD_RESET";
+		case STATE_ADDR_PAGE:
+			return "STATE_ADDR_PAGE";
+		case STATE_ADDR_SEC:
+			return "STATE_ADDR_SEC";
+		case STATE_ADDR_ZERO:
+			return "STATE_ADDR_ZERO";
+		case STATE_DATAIN:
+			return "STATE_DATAIN";
+		case STATE_DATAOUT:
+			return "STATE_DATAOUT";
+		case STATE_DATAOUT_ID:
+			return "STATE_DATAOUT_ID";
+		case STATE_DATAOUT_STATUS:
+			return "STATE_DATAOUT_STATUS";
+		case STATE_DATAOUT_STATUS_M:
+			return "STATE_DATAOUT_STATUS_M";
+		case STATE_READY:
+			return "STATE_READY";
+		case STATE_UNKNOWN:
+			return "STATE_UNKNOWN";
+	}
+
+	NS_ERR("get_state_name: unknown state, BUG\n");
+	return NULL;
+}
+
+/*
+ * Check if command is valid.
+ *
+ * RETURNS: 1 if wrong command, 0 if right.
+ */
+static int
+check_command(int cmd)
+{
+	switch (cmd) {
+		
+	case NAND_CMD_READ0:
+	case NAND_CMD_READSTART:
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_READOOB:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_STATUS:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_READID:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_RESET:
+	case NAND_CMD_READ1:
+		return 0;
+		
+	case NAND_CMD_STATUS_MULTI:
+	default:
+		return 1;
+	}
+}
+
+/*
+ * Returns state after command is accepted by command number.
+ */
+static uint32_t
+get_state_by_command(unsigned command)
+{
+	switch (command) {
+		case NAND_CMD_READ0:
+			return STATE_CMD_READ0;
+		case NAND_CMD_READ1:
+			return STATE_CMD_READ1;
+		case NAND_CMD_PAGEPROG:
+			return STATE_CMD_PAGEPROG;
+		case NAND_CMD_READSTART:
+			return STATE_CMD_READSTART;
+		case NAND_CMD_READOOB:
+			return STATE_CMD_READOOB;
+		case NAND_CMD_ERASE1:
+			return STATE_CMD_ERASE1;
+		case NAND_CMD_STATUS:
+			return STATE_CMD_STATUS;
+		case NAND_CMD_STATUS_MULTI:
+			return STATE_CMD_STATUS_M;
+		case NAND_CMD_SEQIN:
+			return STATE_CMD_SEQIN;
+		case NAND_CMD_READID:
+			return STATE_CMD_READID;
+		case NAND_CMD_ERASE2:
+			return STATE_CMD_ERASE2;
+		case NAND_CMD_RESET:
+			return STATE_CMD_RESET;
+	}
+
+	NS_ERR("get_state_by_command: unknown command, BUG\n");
+	return 0;
+}
+
+/*
+ * Move an address byte to the correspondent internal register.
+ */
+static inline void
+accept_addr_byte(struct nandsim *ns, u_char bt)
+{
+	uint byte = (uint)bt;
+	
+	if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes))
+		ns->regs.column |= (byte << 8 * ns->regs.count);
+	else {
+		ns->regs.row |= (byte << 8 * (ns->regs.count -
+						ns->geom.pgaddrbytes +
+						ns->geom.secaddrbytes));
+	}
+
+	return;
+}
+		
+/*
+ * Switch to STATE_READY state.
+ */
+static inline void 
+switch_to_ready_state(struct nandsim *ns, u_char status)
+{
+	NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY));
+
+	ns->state       = STATE_READY;
+	ns->nxstate     = STATE_UNKNOWN;
+	ns->op          = NULL;
+	ns->npstates    = 0;
+	ns->stateidx    = 0;
+	ns->regs.num    = 0;
+	ns->regs.count  = 0;
+	ns->regs.off    = 0;
+	ns->regs.row    = 0;
+	ns->regs.column = 0;
+	ns->regs.status = status;
+}
+
+/*
+ * If the operation isn't known yet, try to find it in the global array
+ * of supported operations.
+ *
+ * Operation can be unknown because of the following.
+ *   1. New command was accepted and this is the firs call to find the
+ *      correspondent states chain. In this case ns->npstates = 0;
+ *   2. There is several operations which begin with the same command(s)
+ *      (for example program from the second half and read from the
+ *      second half operations both begin with the READ1 command). In this
+ *      case the ns->pstates[] array contains previous states.
+ * 
+ * Thus, the function tries to find operation containing the following
+ * states (if the 'flag' parameter is 0):
+ *    ns->pstates[0], ... ns->pstates[ns->npstates], ns->state
+ *
+ * If (one and only one) matching operation is found, it is accepted (
+ * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
+ * zeroed).
+ * 
+ * If there are several maches, the current state is pushed to the
+ * ns->pstates.
+ *
+ * The operation can be unknown only while commands are input to the chip.
+ * As soon as address command is accepted, the operation must be known.
+ * In such situation the function is called with 'flag' != 0, and the
+ * operation is searched using the following pattern:
+ *     ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
+ * 
+ * It is supposed that this pattern must either match one operation on
+ * none. There can't be ambiguity in that case.
+ *
+ * If no matches found, the functions does the following:
+ *   1. if there are saved states present, try to ignore them and search
+ *      again only using the last command. If nothing was found, switch
+ *      to the STATE_READY state.
+ *   2. if there are no saved states, switch to the STATE_READY state.
+ *
+ * RETURNS: -2 - no matched operations found.
+ *          -1 - several matches.
+ *           0 - operation is found.
+ */
+static int
+find_operation(struct nandsim *ns, uint32_t flag)
+{
+	int opsfound = 0;
+	int i, j, idx = 0;
+	
+	for (i = 0; i < NS_OPER_NUM; i++) {
+
+		int found = 1;
+	
+		if (!(ns->options & ops[i].reqopts))
+			/* Ignore operations we can't perform */
+			continue;
+			
+		if (flag) {
+			if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK))
+				continue;
+		} else {
+			if (NS_STATE(ns->state) != NS_STATE(ops[i].states[ns->npstates]))
+				continue;
+		}
+
+		for (j = 0; j < ns->npstates; j++) 
+			if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j])
+				&& (ns->options & ops[idx].reqopts)) {
+				found = 0;
+				break;
+			}
+
+		if (found) {
+			idx = i;
+			opsfound += 1;
+		}
+	}
+
+	if (opsfound == 1) {
+		/* Exact match */
+		ns->op = &ops[idx].states[0];
+		if (flag) {
+			/* 
+			 * In this case the find_operation function was
+			 * called when address has just began input. But it isn't
+			 * yet fully input and the current state must
+			 * not be one of STATE_ADDR_*, but the STATE_ADDR_*
+			 * state must be the next state (ns->nxstate).
+			 */
+			ns->stateidx = ns->npstates - 1;
+		} else {
+			ns->stateidx = ns->npstates;
+		}
+		ns->npstates = 0;
+		ns->state = ns->op[ns->stateidx];
+		ns->nxstate = ns->op[ns->stateidx + 1];
+		NS_DBG("find_operation: operation found, index: %d, state: %s, nxstate %s\n",
+				idx, get_state_name(ns->state), get_state_name(ns->nxstate));
+		return 0;
+	}
+	
+	if (opsfound == 0) {
+		/* Nothing was found. Try to ignore previous commands (if any) and search again */
+		if (ns->npstates != 0) {
+			NS_DBG("find_operation: no operation found, try again with state %s\n",
+					get_state_name(ns->state));
+			ns->npstates = 0;
+			return find_operation(ns, 0);
+
+		}
+		NS_DBG("find_operation: no operations found\n");
+		switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+		return -2;
+	}
+	
+	if (flag) {
+		/* This shouldn't happen */
+		NS_DBG("find_operation: BUG, operation must be known if address is input\n");
+		return -2;
+	}
+	
+	NS_DBG("find_operation: there is still ambiguity\n");
+
+	ns->pstates[ns->npstates++] = ns->state;
+
+	return -1;
+}
+
+/*
+ * If state has any action bit, perform this action.
+ *
+ * RETURNS: 0 if success, -1 if error.
+ */
+static int
+do_state_action(struct nandsim *ns, uint32_t action)
+{
+	int i, num;
+	int busdiv = ns->busw == 8 ? 1 : 2;
+
+	action &= ACTION_MASK;
+	
+	/* Check that page address input is correct */
+	if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) {
+		NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row);
+		return -1;
+	}
+
+	switch (action) {
+
+	case ACTION_CPY:
+		/*
+		 * Copy page data to the internal buffer.
+		 */
+
+		/* Column shouldn't be very large */
+		if (ns->regs.column >= (ns->geom.pgszoob - ns->regs.off)) {
+			NS_ERR("do_state_action: column number is too large\n");
+			break;
+		}
+		num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
+		memcpy(ns->buf.byte, ns->mem.byte + NS_RAW_OFFSET(ns) + ns->regs.off, num);
+
+		NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
+			num, NS_RAW_OFFSET(ns) + ns->regs.off);
+		
+		if (ns->regs.off == 0)
+			NS_LOG("read page %d\n", ns->regs.row);
+		else if (ns->regs.off < ns->geom.pgsz)
+			NS_LOG("read page %d (second half)\n", ns->regs.row);
+		else
+			NS_LOG("read OOB of page %d\n", ns->regs.row);
+		
+		NS_UDELAY(access_delay);
+		NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv);
+
+		break;
+
+	case ACTION_SECERASE:
+		/*
+		 * Erase sector.
+		 */
+		
+		if (ns->lines.wp) {
+			NS_ERR("do_state_action: device is write-protected, ignore sector erase\n");
+			return -1;
+		}
+		
+		if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec
+			|| (ns->regs.row & ~(ns->geom.secsz - 1))) {
+			NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row);
+			return -1;
+		}
+		
+		ns->regs.row = (ns->regs.row <<
+				8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column;
+		ns->regs.column = 0;
+		
+		NS_DBG("do_state_action: erase sector at address %#x, off = %d\n",
+				ns->regs.row, NS_RAW_OFFSET(ns));
+		NS_LOG("erase sector %d\n", ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift));
+
+		memset(ns->mem.byte + NS_RAW_OFFSET(ns), 0xFF, ns->geom.secszoob);
+		
+		NS_MDELAY(erase_delay);
+		
+		break;
+
+	case ACTION_PRGPAGE:
+		/*
+		 * Programm page - move internal buffer data to the page.
+		 */
+
+		if (ns->lines.wp) {
+			NS_WARN("do_state_action: device is write-protected, programm\n");
+			return -1;
+		}
+
+		num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
+		if (num != ns->regs.count) {
+			NS_ERR("do_state_action: too few bytes were input (%d instead of %d)\n",
+					ns->regs.count, num);
+			return -1;
+		}
+
+		for (i = 0; i < num; i++)
+			ns->mem.byte[NS_RAW_OFFSET(ns) + ns->regs.off + i] &= ns->buf.byte[i];
+
+		NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
+			num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
+		NS_LOG("programm page %d\n", ns->regs.row);
+		
+		NS_UDELAY(programm_delay);
+		NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv);
+		
+		break;
+	
+	case ACTION_ZEROOFF:
+		NS_DBG("do_state_action: set internal offset to 0\n");
+		ns->regs.off = 0;
+		break;
+
+	case ACTION_HALFOFF:
+		if (!(ns->options & OPT_PAGE512_8BIT)) {
+			NS_ERR("do_state_action: BUG! can't skip half of page for non-512"
+				"byte page size 8x chips\n");
+			return -1;
+		}
+		NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz/2);
+		ns->regs.off = ns->geom.pgsz/2;
+		break;
+
+	case ACTION_OOBOFF:
+		NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz);
+		ns->regs.off = ns->geom.pgsz;
+		break;
+		
+	default:
+		NS_DBG("do_state_action: BUG! unknown action\n");
+	}
+
+	return 0;
+}
+
+/*
+ * Switch simulator's state.
+ */
+static void
+switch_state(struct nandsim *ns)
+{
+	if (ns->op) {
+		/*
+		 * The current operation have already been identified.
+		 * Just follow the states chain.
+		 */
+		
+		ns->stateidx += 1;
+		ns->state = ns->nxstate;
+		ns->nxstate = ns->op[ns->stateidx + 1];
+
+		NS_DBG("switch_state: operation is known, switch to the next state, "
+			"state: %s, nxstate: %s\n",
+			get_state_name(ns->state), get_state_name(ns->nxstate));
+
+		/* See, whether we need to do some action */
+		if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
+			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+			return;
+		}
+		
+	} else {
+		/*
+		 * We don't yet know which operation we perform.
+		 * Try to identify it.
+		 */
+
+		/*  
+		 *  The only event causing the switch_state function to
+		 *  be called with yet unknown operation is new command.
+		 */
+		ns->state = get_state_by_command(ns->regs.command);
+
+		NS_DBG("switch_state: operation is unknown, try to find it\n");
+
+		if (find_operation(ns, 0) != 0)
+			return;
+
+		if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
+			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+			return;
+		}
+	}
+
+	/* For 16x devices column means the page offset in words */
+	if ((ns->nxstate & STATE_ADDR_MASK) && ns->busw == 16) {
+		NS_DBG("switch_state: double the column number for 16x device\n");
+		ns->regs.column <<= 1;
+	}
+
+	if (NS_STATE(ns->nxstate) == STATE_READY) {
+		/*
+		 * The current state is the last. Return to STATE_READY
+		 */
+
+		u_char status = NS_STATUS_OK(ns);
+		
+		/* In case of data states, see if all bytes were input/output */
+		if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK))
+			&& ns->regs.count != ns->regs.num) {
+			NS_WARN("switch_state: not all bytes were processed, %d left\n",
+					ns->regs.num - ns->regs.count);
+			status = NS_STATUS_FAILED(ns);
+		}
+				
+		NS_DBG("switch_state: operation complete, switch to STATE_READY state\n");
+
+		switch_to_ready_state(ns, status);
+
+		return;
+	} else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) {
+		/* 
+		 * If the next state is data input/output, switch to it now
+		 */
+		
+		ns->state      = ns->nxstate;
+		ns->nxstate    = ns->op[++ns->stateidx + 1];
+		ns->regs.num   = ns->regs.count = 0;
+
+		NS_DBG("switch_state: the next state is data I/O, switch, "
+			"state: %s, nxstate: %s\n",
+			get_state_name(ns->state), get_state_name(ns->nxstate));
+
+		/*
+		 * Set the internal register to the count of bytes which
+		 * are expected to be input or output
+		 */
+		switch (NS_STATE(ns->state)) {
+			case STATE_DATAIN:
+			case STATE_DATAOUT:
+				ns->regs.num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
+				break;
+				
+			case STATE_DATAOUT_ID:
+				ns->regs.num = ns->geom.idbytes;
+				break;
+				
+			case STATE_DATAOUT_STATUS:
+			case STATE_DATAOUT_STATUS_M:
+				ns->regs.count = ns->regs.num = 0;
+				break;
+				
+			default:
+				NS_ERR("switch_state: BUG! unknown data state\n");
+		}
+
+	} else if (ns->nxstate & STATE_ADDR_MASK) {
+		/*
+		 * If the next state is address input, set the internal
+		 * register to the number of expected address bytes
+		 */
+
+		ns->regs.count = 0;
+		
+		switch (NS_STATE(ns->nxstate)) {
+			case STATE_ADDR_PAGE:
+				ns->regs.num = ns->geom.pgaddrbytes;
+		
+				break;
+			case STATE_ADDR_SEC:
+				ns->regs.num = ns->geom.secaddrbytes;
+				break;
+	
+			case STATE_ADDR_ZERO:
+				ns->regs.num = 1;
+				break;
+
+			default:
+				NS_ERR("switch_state: BUG! unknown address state\n");
+		}
+	} else {
+		/* 
+		 * Just reset internal counters.
+		 */
+
+		ns->regs.num = 0;
+		ns->regs.count = 0;
+	}
+}
+
+static void
+ns_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+
+	switch (cmd) {
+
+	/* set CLE line high */
+	case NAND_CTL_SETCLE:
+		NS_DBG("ns_hwcontrol: start command latch cycles\n");
+		ns->lines.cle  = 1;
+		break;
+
+	/* set CLE line low */
+	case NAND_CTL_CLRCLE:
+		NS_DBG("ns_hwcontrol: stop command latch cycles\n");
+		ns->lines.cle  = 0;
+		break;
+
+	/* set ALE line high */
+	case NAND_CTL_SETALE:
+		NS_DBG("ns_hwcontrol: start address latch cycles\n");
+		ns->lines.ale   = 1;
+		break;
+
+	/* set ALE line low */
+	case NAND_CTL_CLRALE:
+		NS_DBG("ns_hwcontrol: stop address latch cycles\n");
+		ns->lines.ale  = 0;
+		break;
+
+	/* set WP line high */
+	case NAND_CTL_SETWP:
+		NS_DBG("ns_hwcontrol: enable write protection\n");
+		ns->lines.wp = 1;
+		break;
+
+	/* set WP line low */
+	case NAND_CTL_CLRWP:
+		NS_DBG("ns_hwcontrol: disable write protection\n");
+		ns->lines.wp = 0;
+		break;
+
+	/* set CE line low */
+	case NAND_CTL_SETNCE:
+		NS_DBG("ns_hwcontrol: enable chip\n");
+		ns->lines.ce = 1;
+		break;
+
+	/* set CE line high */
+	case NAND_CTL_CLRNCE:
+		NS_DBG("ns_hwcontrol: disable chip\n");
+		ns->lines.ce = 0;
+		break;
+
+	default:
+		NS_ERR("hwcontrol: unknown command\n");
+        }
+
+	return;
+}
+
+static u_char
+ns_nand_read_byte(struct mtd_info *mtd)
+{
+        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	u_char outb = 0x00;
+
+	/* Sanity and correctness checks */
+	if (!ns->lines.ce) {
+		NS_ERR("read_byte: chip is disabled, return %#x\n", (uint)outb);
+		return outb;
+	}
+	if (ns->lines.ale || ns->lines.cle) {
+		NS_ERR("read_byte: ALE or CLE pin is high, return %#x\n", (uint)outb);
+		return outb;
+	}
+	if (!(ns->state & STATE_DATAOUT_MASK)) {
+		NS_WARN("read_byte: unexpected data output cycle, state is %s "
+			"return %#x\n", get_state_name(ns->state), (uint)outb);
+		return outb;
+	}
+
+	/* Status register may be read as many times as it is wanted */
+	if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS) {
+		NS_DBG("read_byte: return %#x status\n", ns->regs.status);
+		return ns->regs.status;
+	}
+
+	/* Check if there is any data in the internal buffer which may be read */
+	if (ns->regs.count == ns->regs.num) {
+		NS_WARN("read_byte: no more data to output, return %#x\n", (uint)outb);
+		return outb;
+	}
+
+	switch (NS_STATE(ns->state)) {
+		case STATE_DATAOUT:
+			if (ns->busw == 8) {
+				outb = ns->buf.byte[ns->regs.count];
+				ns->regs.count += 1;
+			} else {
+				outb = (u_char)cpu_to_le16(ns->buf.word[ns->regs.count >> 1]);
+				ns->regs.count += 2;
+			}
+			break;
+		case STATE_DATAOUT_ID:
+			NS_DBG("read_byte: read ID byte %d, total = %d\n", ns->regs.count, ns->regs.num);
+			outb = ns->ids[ns->regs.count];
+			ns->regs.count += 1;
+			break;
+		default:
+			BUG();
+	}
+	
+	if (ns->regs.count == ns->regs.num) {
+		NS_DBG("read_byte: all bytes were read\n");
+
+		/*
+		 * The OPT_AUTOINCR allows to read next conseqitive pages without
+		 * new read operation cycle.
+		 */
+		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
+			ns->regs.count = 0;
+			if (ns->regs.row + 1 < ns->geom.pgnum)
+				ns->regs.row += 1;
+			NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row);
+			do_state_action(ns, ACTION_CPY);
+		}
+		else if (NS_STATE(ns->nxstate) == STATE_READY)
+			switch_state(ns);
+		
+	}
+	
+	return outb;
+}
+
+static void
+ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	
+	/* Sanity and correctness checks */
+	if (!ns->lines.ce) {
+		NS_ERR("write_byte: chip is disabled, ignore write\n");
+		return;
+	}
+	if (ns->lines.ale && ns->lines.cle) {
+		NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n");
+		return;
+	}
+			
+	if (ns->lines.cle == 1) {
+		/*
+		 * The byte written is a command.
+		 */
+
+		if (byte == NAND_CMD_RESET) {
+			NS_LOG("reset chip\n");
+			switch_to_ready_state(ns, NS_STATUS_OK(ns));
+			return;
+		}
+
+		/* 
+		 * Chip might still be in STATE_DATAOUT
+		 * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
+		 * STATE_DATAOUT_STATUS_M state. If so, switch state.
+		 */
+		if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
+			|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
+			|| ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT))
+			switch_state(ns);
+
+		/* Check if chip is expecting command */
+		if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
+			/*
+			 * We are in situation when something else (not command)
+			 * was expected but command was input. In this case ignore
+			 * previous command(s)/state(s) and accept the last one.
+			 */
+			NS_WARN("write_byte: command (%#x) wasn't expected, expected state is %s, "
+				"ignore previous states\n", (uint)byte, get_state_name(ns->nxstate));
+			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+		}
+		
+		/* Check that the command byte is correct */
+		if (check_command(byte)) {
+			NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
+			return;
+		}
+		
+		NS_DBG("command byte corresponding to %s state accepted\n",
+			get_state_name(get_state_by_command(byte)));
+		ns->regs.command = byte;
+		switch_state(ns);
+
+	} else if (ns->lines.ale == 1) {
+		/*
+		 * The byte written is an address.
+		 */
+
+		if (NS_STATE(ns->nxstate) == STATE_UNKNOWN) {
+
+			NS_DBG("write_byte: operation isn't known yet, identify it\n");
+
+			if (find_operation(ns, 1) < 0)
+				return;
+			
+			if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
+				switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+				return;
+			}
+				
+			ns->regs.count = 0;
+			switch (NS_STATE(ns->nxstate)) {
+				case STATE_ADDR_PAGE:
+					ns->regs.num = ns->geom.pgaddrbytes;
+					break;
+				case STATE_ADDR_SEC:
+					ns->regs.num = ns->geom.secaddrbytes;
+					break;
+				case STATE_ADDR_ZERO:
+					ns->regs.num = 1;
+					break;
+				default:
+					BUG();
+			}
+		}
+
+		/* Check that chip is expecting address */
+		if (!(ns->nxstate & STATE_ADDR_MASK)) {
+			NS_ERR("write_byte: address (%#x) isn't expected, expected state is %s, "
+				"switch to STATE_READY\n", (uint)byte, get_state_name(ns->nxstate));
+			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+			return;
+		}
+		
+		/* Check if this is expected byte */
+		if (ns->regs.count == ns->regs.num) {
+			NS_ERR("write_byte: no more address bytes expected\n");
+			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+			return;
+		}
+
+		accept_addr_byte(ns, byte);
+
+		ns->regs.count += 1;
+
+		NS_DBG("write_byte: address byte %#x was accepted (%d bytes input, %d expected)\n",
+				(uint)byte, ns->regs.count, ns->regs.num);
+
+		if (ns->regs.count == ns->regs.num) {
+			NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column);
+			switch_state(ns);
+		}
+		
+	} else {
+		/*
+		 * The byte written is an input data.
+		 */
+		
+		/* Check that chip is expecting data input */
+		if (!(ns->state & STATE_DATAIN_MASK)) {
+			NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, "
+				"switch to %s\n", (uint)byte,
+				get_state_name(ns->state), get_state_name(STATE_READY));
+			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+			return;
+		}
+
+		/* Check if this is expected byte */
+		if (ns->regs.count == ns->regs.num) {
+			NS_WARN("write_byte: %u input bytes has already been accepted, ignore write\n",
+					ns->regs.num);
+			return;
+		}
+
+		if (ns->busw == 8) {
+			ns->buf.byte[ns->regs.count] = byte;
+			ns->regs.count += 1;
+		} else {
+			ns->buf.word[ns->regs.count >> 1] = cpu_to_le16((uint16_t)byte);
+			ns->regs.count += 2;
+		}
+	}
+
+	return;
+}
+
+static int
+ns_device_ready(struct mtd_info *mtd)
+{
+	NS_DBG("device_ready\n");
+	return 1;
+}
+
+static uint16_t
+ns_nand_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+
+	NS_DBG("read_word\n");
+	
+	return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8);
+}
+
+static void
+ns_nand_write_word(struct mtd_info *mtd, uint16_t word)
+{
+	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+	
+	NS_DBG("write_word\n");
+	
+	chip->write_byte(mtd, word & 0xFF);
+	chip->write_byte(mtd, word >> 8);
+}
+
+static void 
+ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+
+	/* Check that chip is expecting data input */
+	if (!(ns->state & STATE_DATAIN_MASK)) {
+		NS_ERR("write_buf: data input isn't expected, state is %s, "
+			"switch to STATE_READY\n", get_state_name(ns->state));
+		switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+		return;
+	}
+
+	/* Check if these are expected bytes */
+	if (ns->regs.count + len > ns->regs.num) {
+		NS_ERR("write_buf: too many input bytes\n");
+		switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+		return;
+	}
+
+	memcpy(ns->buf.byte + ns->regs.count, buf, len);
+	ns->regs.count += len;
+	
+	if (ns->regs.count == ns->regs.num) {
+		NS_DBG("write_buf: %d bytes were written\n", ns->regs.count);
+	}
+}
+
+static void 
+ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+
+	/* Sanity and correctness checks */
+	if (!ns->lines.ce) {
+		NS_ERR("read_buf: chip is disabled\n");
+		return;
+	}
+	if (ns->lines.ale || ns->lines.cle) {
+		NS_ERR("read_buf: ALE or CLE pin is high\n");
+		return;
+	}
+	if (!(ns->state & STATE_DATAOUT_MASK)) {
+		NS_WARN("read_buf: unexpected data output cycle, current state is %s\n",
+			get_state_name(ns->state));
+		return;
+	}
+
+	if (NS_STATE(ns->state) != STATE_DATAOUT) {
+		int i;
+
+		for (i = 0; i < len; i++)
+			buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd);
+
+		return;
+	}
+
+	/* Check if these are expected bytes */
+	if (ns->regs.count + len > ns->regs.num) {
+		NS_ERR("read_buf: too many bytes to read\n");
+		switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+		return;
+	}
+
+	memcpy(buf, ns->buf.byte + ns->regs.count, len);
+	ns->regs.count += len;
+	
+	if (ns->regs.count == ns->regs.num) {
+		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
+			ns->regs.count = 0;
+			if (ns->regs.row + 1 < ns->geom.pgnum)
+				ns->regs.row += 1;
+			NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row);
+			do_state_action(ns, ACTION_CPY);
+		}
+		else if (NS_STATE(ns->nxstate) == STATE_READY)
+			switch_state(ns);
+	}
+	
+	return;
+}
+
+static int 
+ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	ns_nand_read_buf(mtd, (u_char *)&ns_verify_buf[0], len);
+
+	if (!memcmp(buf, &ns_verify_buf[0], len)) {
+		NS_DBG("verify_buf: the buffer is OK\n");
+		return 0;
+	} else {
+		NS_DBG("verify_buf: the buffer is wrong\n");
+		return -EFAULT;
+	}
+}
+
+/*
+ * Having only NAND chip IDs we call nand_scan which detects NAND flash
+ * parameters and then calls scan_bbt in order to scan/find/build the
+ * NAND flash bad block table. But since at that moment the NAND flash
+ * image isn't allocated in the simulator, errors arise. To avoid this
+ * we redefine the scan_bbt callback and initialize the nandsim structure
+ * before the flash media scanning.
+ */
+int ns_scan_bbt(struct mtd_info *mtd)
+{ 
+	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
+	int retval;
+
+	if (!NS_IS_INITIALIZED(ns))
+		if ((retval = init_nandsim(mtd)) != 0) {
+			NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
+			return retval;
+		}
+	if ((retval = nand_default_bbt(mtd)) != 0) {
+		free_nandsim(ns);
+		return retval;
+	}
+
+	return 0;
+}
+
+/*
+ * Module initialization function
+ */
+int __init ns_init_module(void)
+{
+	struct nand_chip *chip;
+	struct nandsim *nand;
+	int retval = -ENOMEM;
+
+	if (bus_width != 8 && bus_width != 16) {
+		NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
+		return -EINVAL;
+	}
+	
+	/* Allocate and initialize mtd_info, nand_chip and nandsim structures */
+	nsmtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
+				+ sizeof(struct nandsim), GFP_KERNEL);
+	if (!nsmtd) {
+		NS_ERR("unable to allocate core structures.\n");
+		return -ENOMEM;
+	}
+	memset(nsmtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip) +
+			sizeof(struct nandsim));
+	chip        = (struct nand_chip *)(nsmtd + 1);
+        nsmtd->priv = (void *)chip;
+	nand        = (struct nandsim *)(chip + 1);
+	chip->priv  = (void *)nand;	
+
+	/*
+	 * Register simulator's callbacks.
+	 */
+	chip->hwcontrol  = ns_hwcontrol;
+	chip->read_byte  = ns_nand_read_byte;
+	chip->dev_ready  = ns_device_ready;
+	chip->scan_bbt   = ns_scan_bbt;
+	chip->write_byte = ns_nand_write_byte;
+	chip->write_buf  = ns_nand_write_buf;
+	chip->read_buf   = ns_nand_read_buf;
+	chip->verify_buf = ns_nand_verify_buf;
+	chip->write_word = ns_nand_write_word;
+	chip->read_word  = ns_nand_read_word;
+	chip->eccmode    = NAND_ECC_SOFT;
+
+	/* 
+	 * Perform minimum nandsim structure initialization to handle
+	 * the initial ID read command correctly 
+	 */
+	if (third_id_byte != 0xFF || fourth_id_byte != 0xFF)
+		nand->geom.idbytes = 4;
+	else
+		nand->geom.idbytes = 2;
+	nand->regs.status = NS_STATUS_OK(nand);
+	nand->nxstate = STATE_UNKNOWN;
+	nand->options |= OPT_PAGE256; /* temporary value */
+	nand->ids[0] = first_id_byte;
+	nand->ids[1] = second_id_byte;
+	nand->ids[2] = third_id_byte;
+	nand->ids[3] = fourth_id_byte;
+	if (bus_width == 16) {
+		nand->busw = 16;
+		chip->options |= NAND_BUSWIDTH_16;
+	}
+
+	if ((retval = nand_scan(nsmtd, 1)) != 0) {
+		NS_ERR("can't register NAND Simulator\n");
+		if (retval > 0)
+			retval = -ENXIO;
+		goto error;
+	}
+
+	/* Register NAND as one big partition */
+	add_mtd_partitions(nsmtd, &nand->part, 1);
+
+        return 0;
+
+error:
+	kfree(nsmtd);
+
+	return retval;
+}
+
+module_init(ns_init_module);
+
+/*
+ * Module clean-up function
+ */
+static void __exit ns_cleanup_module(void)
+{
+	struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv);
+
+	free_nandsim(ns);    /* Free nandsim private resources */
+	nand_release(nsmtd); /* Unregisterd drived */
+	kfree(nsmtd);        /* Free other structures */
+}
+
+module_exit(ns_cleanup_module);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR ("Artem B. Bityuckiy");
+MODULE_DESCRIPTION ("The NAND flash simulator");
+
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
new file mode 100644
index 000000000000..e510a83d7bdb
--- /dev/null
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -0,0 +1,420 @@
+/*
+ *  drivers/mtd/nand/ppchameleonevb.c
+ *
+ *  Copyright (C) 2003 DAVE Srl (info@wawnet.biz)
+ *
+ *  Derived from drivers/mtd/nand/edb7312.c
+ *
+ *
+ * $Id: ppchameleonevb.c,v 1.6 2004/11/05 16:07:16 kalev Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash devices found on the
+ *   PPChameleon/PPChameleonEVB system.
+ *   PPChameleon options (autodetected):
+ *   - BA model: no NAND
+ *   - ME model: 32MB (Samsung K9F5608U0B)
+ *   - HI model: 128MB (Samsung K9F1G08UOM)
+ *   PPChameleonEVB options:
+ *   - 32MB (Samsung K9F5608U0B)
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <platforms/PPChameleonEVB.h>
+
+#undef USE_READY_BUSY_PIN
+#define USE_READY_BUSY_PIN
+/* see datasheets (tR) */
+#define NAND_BIG_DELAY_US		25
+#define NAND_SMALL_DELAY_US		10
+
+/* handy sizes */
+#define SZ_4M                           0x00400000
+#define NAND_SMALL_SIZE                 0x02000000
+#define NAND_MTD_NAME		"ppchameleon-nand"
+#define NAND_EVB_MTD_NAME	"ppchameleonevb-nand"
+
+/* GPIO pins used to drive NAND chip mounted on processor module */
+#define NAND_nCE_GPIO_PIN 		(0x80000000 >> 1)
+#define NAND_CLE_GPIO_PIN 		(0x80000000 >> 2)
+#define NAND_ALE_GPIO_PIN 		(0x80000000 >> 3)
+#define NAND_RB_GPIO_PIN 		(0x80000000 >> 4)
+/* GPIO pins used to drive NAND chip mounted on EVB */
+#define NAND_EVB_nCE_GPIO_PIN 	(0x80000000 >> 14)
+#define NAND_EVB_CLE_GPIO_PIN 	(0x80000000 >> 15)
+#define NAND_EVB_ALE_GPIO_PIN 	(0x80000000 >> 16)
+#define NAND_EVB_RB_GPIO_PIN 	(0x80000000 >> 31)
+
+/*
+ * MTD structure for PPChameleonEVB board
+ */
+static struct mtd_info *ppchameleon_mtd 	= NULL;
+static struct mtd_info *ppchameleonevb_mtd = NULL;
+
+/*
+ * Module stuff
+ */
+static unsigned long ppchameleon_fio_pbase 	= CFG_NAND0_PADDR;
+static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
+
+#ifdef MODULE
+module_param(ppchameleon_fio_pbase, ulong, 0);
+module_param(ppchameleonevb_fio_pbase, ulong, 0);
+#else
+__setup("ppchameleon_fio_pbase=",ppchameleon_fio_pbase);
+__setup("ppchameleonevb_fio_pbase=",ppchameleonevb_fio_pbase);
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * Define static partitions for flash devices
+ */
+static struct mtd_partition partition_info_hi[] = {
+	{ name: "PPChameleon HI Nand Flash",
+		  offset: 0,
+		  size: 128*1024*1024 }
+};
+
+static struct mtd_partition partition_info_me[] = {
+	{ name: "PPChameleon ME Nand Flash",
+		  offset: 0,
+		  size: 32*1024*1024 }
+};
+
+static struct mtd_partition partition_info_evb[] = {
+	{ name: "PPChameleonEVB Nand Flash",
+		  offset: 0,
+		  size: 32*1024*1024 }
+};
+
+#define NUM_PARTITIONS 1
+
+extern int parse_cmdline_partitions(struct mtd_info *master,
+				    struct mtd_partition **pparts,
+				    const char *mtd_id);
+#endif
+
+
+/*
+ *	hardware specific access to control-lines
+ */
+static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+	switch(cmd) {
+
+	case NAND_CTL_SETCLE:
+        	MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_CLRCLE:
+        	MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_SETALE:
+        	MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_CLRALE:
+        	MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_SETNCE:
+			MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	case NAND_CTL_CLRNCE:
+			MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
+		break;
+	}
+}
+
+static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+	switch(cmd) {
+
+	case NAND_CTL_SETCLE:
+        	MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_CLRCLE:
+        	MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_SETALE:
+        	MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_CLRALE:
+        	MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_SETNCE:
+        	MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	case NAND_CTL_CLRNCE:
+        	MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
+		break;
+	}
+}
+
+#ifdef USE_READY_BUSY_PIN
+/*
+ *	read device ready pin
+ */
+static int ppchameleon_device_ready(struct mtd_info *minfo)
+{
+	if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_RB_GPIO_PIN)
+		return 1;
+	return 0;
+}
+
+static int ppchameleonevb_device_ready(struct mtd_info *minfo)
+{
+	if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
+	return 1;
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+const char *part_probes_evb[] = { "cmdlinepart", NULL };
+#endif
+
+/*
+ * Main initialization routine
+ */
+static int __init ppchameleonevb_init (void)
+{
+	struct nand_chip *this;
+	const char *part_type = 0;
+	int mtd_parts_nb = 0;
+	struct mtd_partition *mtd_parts = 0;
+	void __iomem *ppchameleon_fio_base;
+	void __iomem *ppchameleonevb_fio_base;
+
+
+	/*********************************
+	* Processor module NAND (if any) *
+	*********************************/
+	/* Allocate memory for MTD device structure and private data */
+	ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) +
+						      sizeof(struct nand_chip), GFP_KERNEL);
+	if (!ppchameleon_mtd) {
+		printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* map physical address */
+	ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
+	if(!ppchameleon_fio_base) {
+		printk("ioremap PPChameleon NAND flash failed\n");
+		kfree(ppchameleon_mtd);
+		return -EIO;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&ppchameleon_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) ppchameleon_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	ppchameleon_mtd->priv = this;
+
+        /* Initialize GPIOs */
+	/* Pin mapping for NAND chip */
+	/*
+		CE	GPIO_01
+		CLE	GPIO_02
+		ALE	GPIO_03
+		R/B	GPIO_04
+	*/
+	/* output select */
+	out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xC0FFFFFF);
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xC0FFFFFF);
+	/* enable output driver */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
+#ifdef USE_READY_BUSY_PIN
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFF3FFFFF);
+	/* high-impedecence */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
+	/* input select */
+	out_be32((volatile unsigned*)GPIO0_ISR1H, (in_be32((volatile unsigned*)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
+#endif
+
+	/* insert callbacks */
+	this->IO_ADDR_R = ppchameleon_fio_base;
+	this->IO_ADDR_W = ppchameleon_fio_base;
+	this->hwcontrol = ppchameleon_hwcontrol;
+#ifdef USE_READY_BUSY_PIN
+	this->dev_ready = ppchameleon_device_ready;
+#endif
+	this->chip_delay = NAND_BIG_DELAY_US;
+	/* ECC mode */
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Scan to find existence of the device (it could not be mounted) */
+	if (nand_scan (ppchameleon_mtd, 1)) {
+		iounmap((void *)ppchameleon_fio_base);
+		kfree (ppchameleon_mtd);
+		goto nand_evb_init;
+	}
+
+#ifndef USE_READY_BUSY_PIN
+	/* Adjust delay if necessary */
+	if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
+		this->chip_delay = NAND_SMALL_DELAY_US;
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ppchameleon_mtd->name = "ppchameleon-nand";
+	mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
+	if (mtd_parts_nb > 0)
+	  part_type = "command line";
+	else
+	  mtd_parts_nb = 0;
+#endif
+	if (mtd_parts_nb == 0)
+	{
+		if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
+			mtd_parts = partition_info_me;
+		else
+			mtd_parts = partition_info_hi;
+		mtd_parts_nb = NUM_PARTITIONS;
+		part_type = "static";
+	}
+
+	/* Register the partitions */
+	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+	add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
+
+nand_evb_init:
+	/****************************
+	* EVB NAND (always present) *
+	****************************/
+	/* Allocate memory for MTD device structure and private data */
+	ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) +
+							 sizeof(struct nand_chip), GFP_KERNEL);
+	if (!ppchameleonevb_mtd) {
+		printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* map physical address */
+	ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
+	if(!ppchameleonevb_fio_base) {
+		printk("ioremap PPChameleonEVB NAND flash failed\n");
+		kfree(ppchameleonevb_mtd);
+		return -EIO;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&ppchameleonevb_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	ppchameleonevb_mtd->priv = this;
+
+        /* Initialize GPIOs */
+	/* Pin mapping for NAND chip */
+	/*
+		CE	GPIO_14
+		CLE	GPIO_15
+		ALE	GPIO_16
+		R/B	GPIO_31
+	*/
+	/* output select */
+	out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xFFFFFFF0);
+	out_be32((volatile unsigned*)GPIO0_OSRL, in_be32((volatile unsigned*)GPIO0_OSRL) & 0x3FFFFFFF);
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFFFFFFF0);
+	out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0x3FFFFFFF);
+	/* enable output driver */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN | 
+		 NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
+#ifdef USE_READY_BUSY_PIN
+	/* three-state select */
+	out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0xFFFFFFFC);
+	/* high-impedecence */
+	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
+	/* input select */
+	out_be32((volatile unsigned*)GPIO0_ISR1L, (in_be32((volatile unsigned*)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
+#endif
+
+	/* insert callbacks */
+	this->IO_ADDR_R = ppchameleonevb_fio_base;
+	this->IO_ADDR_W = ppchameleonevb_fio_base;
+	this->hwcontrol = ppchameleonevb_hwcontrol;
+#ifdef USE_READY_BUSY_PIN
+	this->dev_ready = ppchameleonevb_device_ready;
+#endif
+	this->chip_delay = NAND_SMALL_DELAY_US;
+
+	/* ECC mode */
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Scan to find existence of the device */
+	if (nand_scan (ppchameleonevb_mtd, 1)) {
+		iounmap((void *)ppchameleonevb_fio_base);
+		kfree (ppchameleonevb_mtd);
+		return -ENXIO;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
+	mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
+	if (mtd_parts_nb > 0)
+	  part_type = "command line";
+	else
+	  mtd_parts_nb = 0;
+#endif
+	if (mtd_parts_nb == 0)
+	{
+		mtd_parts = partition_info_evb;
+		mtd_parts_nb = NUM_PARTITIONS;
+		part_type = "static";
+	}
+
+	/* Register the partitions */
+	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+	add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
+
+	/* Return happy */
+	return 0;
+}
+module_init(ppchameleonevb_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit ppchameleonevb_cleanup (void)
+{
+	struct nand_chip *this;
+
+	/* Release resources, unregister device(s) */
+	nand_release (ppchameleon_mtd);
+	nand_release (ppchameleonevb_mtd);
+	
+	/* Release iomaps */
+	this = (struct nand_chip *) &ppchameleon_mtd[1];
+	iounmap((void *) this->IO_ADDR_R;
+	this = (struct nand_chip *) &ppchameleonevb_mtd[1];
+	iounmap((void *) this->IO_ADDR_R;
+
+	/* Free the MTD device structure */
+	kfree (ppchameleon_mtd);
+	kfree (ppchameleonevb_mtd);
+}
+module_exit(ppchameleonevb_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");
+MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
new file mode 100644
index 000000000000..02305a2adca7
--- /dev/null
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -0,0 +1,559 @@
+/*
+ *  drivers/mtd/nand/rtc_from4.c
+ *
+ *  Copyright (C) 2004  Red Hat, Inc.
+ * 
+ *  Derived from drivers/mtd/nand/spia.c
+ *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * $Id: rtc_from4.c,v 1.7 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ *   This is a device driver for the AG-AND flash device found on the
+ *   Renesas Technology Corp. Flash ROM 4-slot interface board (FROM_BOARD4), 
+ *   which utilizes the Renesas HN29V1G91T-30 part. 
+ *   This chip is a 1 GBibit (128MiB x 8 bits) AG-AND flash device.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/rslib.h>
+#include <linux/module.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
+/*
+ * MTD structure for Renesas board
+ */
+static struct mtd_info *rtc_from4_mtd = NULL;
+
+#define RTC_FROM4_MAX_CHIPS	2
+
+/* HS77x9 processor register defines */
+#define SH77X9_BCR1	((volatile unsigned short *)(0xFFFFFF60))
+#define SH77X9_BCR2	((volatile unsigned short *)(0xFFFFFF62))
+#define SH77X9_WCR1	((volatile unsigned short *)(0xFFFFFF64))
+#define SH77X9_WCR2	((volatile unsigned short *)(0xFFFFFF66))
+#define SH77X9_MCR	((volatile unsigned short *)(0xFFFFFF68))
+#define SH77X9_PCR	((volatile unsigned short *)(0xFFFFFF6C))
+#define SH77X9_FRQCR	((volatile unsigned short *)(0xFFFFFF80))
+
+/*
+ * Values specific to the Renesas Technology Corp. FROM_BOARD4 (used with HS77x9 processor)
+ */
+/* Address where flash is mapped */
+#define RTC_FROM4_FIO_BASE	0x14000000
+
+/* CLE and ALE are tied to address lines 5 & 4, respectively */
+#define RTC_FROM4_CLE		(1 << 5)
+#define RTC_FROM4_ALE		(1 << 4)
+
+/* address lines A24-A22 used for chip selection */
+#define RTC_FROM4_NAND_ADDR_SLOT3	(0x00800000)
+#define RTC_FROM4_NAND_ADDR_SLOT4	(0x00C00000)
+#define RTC_FROM4_NAND_ADDR_FPGA	(0x01000000)
+/* mask address lines A24-A22 used for chip selection */
+#define RTC_FROM4_NAND_ADDR_MASK	(RTC_FROM4_NAND_ADDR_SLOT3 | RTC_FROM4_NAND_ADDR_SLOT4 | RTC_FROM4_NAND_ADDR_FPGA)
+
+/* FPGA status register for checking device ready (bit zero) */
+#define RTC_FROM4_FPGA_SR		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000002)
+#define RTC_FROM4_DEVICE_READY		0x0001
+
+/* FPGA Reed-Solomon ECC Control register */
+
+#define RTC_FROM4_RS_ECC_CTL		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000050)
+#define RTC_FROM4_RS_ECC_CTL_CLR	(1 << 7)
+#define RTC_FROM4_RS_ECC_CTL_GEN	(1 << 6)
+#define RTC_FROM4_RS_ECC_CTL_FD_E	(1 << 5)
+
+/* FPGA Reed-Solomon ECC code base */
+#define RTC_FROM4_RS_ECC		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000060)
+#define RTC_FROM4_RS_ECCN		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000080)
+
+/* FPGA Reed-Solomon ECC check register */
+#define RTC_FROM4_RS_ECC_CHK		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000070)
+#define RTC_FROM4_RS_ECC_CHK_ERROR	(1 << 7)
+
+/* Undefine for software ECC */
+#define RTC_FROM4_HWECC	1
+
+/*
+ * Module stuff
+ */
+static void __iomem *rtc_from4_fio_base = P2SEGADDR(RTC_FROM4_FIO_BASE);
+
+const static struct mtd_partition partition_info[] = {
+        {
+                .name   = "Renesas flash partition 1",
+                .offset = 0,
+                .size   = MTDPART_SIZ_FULL
+        },
+};
+#define NUM_PARTITIONS 1
+
+/* 
+ *	hardware specific flash bbt decriptors
+ *	Note: this is to allow debugging by disabling 
+ *		NAND_BBT_CREATE and/or NAND_BBT_WRITE
+ *
+ */
+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr rtc_from4_bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs = 40,
+	.len = 4,
+	.veroffs = 44,
+	.maxblocks = 4,
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr rtc_from4_bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs = 40,
+	.len = 4,
+	.veroffs = 44,
+	.maxblocks = 4,
+	.pattern = mirror_pattern
+};
+
+
+
+#ifdef RTC_FROM4_HWECC
+
+/* the Reed Solomon control structure */
+static struct rs_control *rs_decoder;
+
+/* 
+ *      hardware specific Out Of Band information
+ */
+static struct nand_oobinfo rtc_from4_nand_oobinfo = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 32,
+	.eccpos = {
+		 0,  1,  2,  3,  4,  5,  6,  7,
+		 8,  9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31},
+	.oobfree = { {32, 32} }
+};
+
+/* Aargh. I missed the reversed bit order, when I
+ * was talking to Renesas about the FPGA.
+ *
+ * The table is used for bit reordering and inversion
+ * of the ecc byte which we get from the FPGA
+ */
+static uint8_t revbits[256] = {
+        0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+        0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+        0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+        0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+        0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+        0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+        0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+        0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+        0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+        0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+        0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+        0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+        0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+        0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+        0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+        0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+        0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+        0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+        0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+        0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+        0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+        0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+        0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+        0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+        0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+        0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+        0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+        0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+        0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+        0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+        0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+        0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+};
+
+#endif
+
+
+
+/* 
+ * rtc_from4_hwcontrol - hardware specific access to control-lines
+ * @mtd:	MTD device structure
+ * @cmd:	hardware control command
+ *
+ * Address lines (A5 and A4) are used to control Command and Address Latch 
+ * Enable on this board, so set the read/write address appropriately.
+ *
+ * Chip Enable is also controlled by the Chip Select (CS5) and 
+ * Address lines (A24-A22), so no action is required here.
+ *
+ */
+static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip* this = (struct nand_chip *) (mtd->priv);
+	
+	switch(cmd) {
+		
+	case NAND_CTL_SETCLE: 
+		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_CLE);
+		break;
+	case NAND_CTL_CLRCLE: 
+		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_CLE);
+		break;
+		
+	case NAND_CTL_SETALE:
+		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_ALE);
+		break;
+	case NAND_CTL_CLRALE:
+		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_ALE);
+		break;
+		
+	case NAND_CTL_SETNCE:
+		break;
+	case NAND_CTL_CLRNCE:
+		break;
+
+	}
+}
+
+
+/*
+ * rtc_from4_nand_select_chip - hardware specific chip select
+ * @mtd:	MTD device structure
+ * @chip:	Chip to select (0 == slot 3, 1 == slot 4)
+ *
+ * The chip select is based on address lines A24-A22.
+ * This driver uses flash slots 3 and 4 (A23-A22).
+ *
+ */
+static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+        struct nand_chip *this = mtd->priv;
+
+	this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R & ~RTC_FROM4_NAND_ADDR_MASK);
+	this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_NAND_ADDR_MASK);
+
+        switch(chip) {
+
+        case 0:		/* select slot 3 chip */
+		this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT3);
+		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT3);
+                break;
+        case 1:		/* select slot 4 chip */
+		this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT4);
+		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT4);
+                break;
+
+        }
+}
+
+
+
+/*
+ * rtc_from4_nand_device_ready - hardware specific ready/busy check
+ * @mtd:	MTD device structure
+ *
+ * This board provides the Ready/Busy state in the status register
+ * of the FPGA.  Bit zero indicates the RDY(1)/BSY(0) signal.
+ *
+ */
+static int rtc_from4_nand_device_ready(struct mtd_info *mtd)
+{
+	unsigned short status;
+
+	status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_FPGA_SR));
+
+	return (status & RTC_FROM4_DEVICE_READY);
+
+}
+
+#ifdef RTC_FROM4_HWECC
+/*
+ * rtc_from4_enable_hwecc - hardware specific hardware ECC enable function
+ * @mtd:	MTD device structure
+ * @mode:	I/O mode; read or write
+ *
+ * enable hardware ECC for data read or write 
+ *
+ */
+static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	volatile unsigned short * rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL);
+	unsigned short status;
+
+	switch (mode) {
+	    case NAND_ECC_READ :
+		status =  RTC_FROM4_RS_ECC_CTL_CLR 
+			| RTC_FROM4_RS_ECC_CTL_FD_E;
+
+		*rs_ecc_ctl = status;
+		break;
+
+	    case NAND_ECC_READSYN :
+		status =  0x00;
+
+		*rs_ecc_ctl = status;
+		break;
+
+	    case NAND_ECC_WRITE :
+		status =  RTC_FROM4_RS_ECC_CTL_CLR 
+			| RTC_FROM4_RS_ECC_CTL_GEN 
+			| RTC_FROM4_RS_ECC_CTL_FD_E;
+
+		*rs_ecc_ctl = status;
+		break;
+
+	    default:
+		BUG();
+		break;
+	}
+
+}
+
+/*
+ * rtc_from4_calculate_ecc - hardware specific code to read ECC code
+ * @mtd:	MTD device structure
+ * @dat:	buffer containing the data to generate ECC codes
+ * @ecc_code	ECC codes calculated
+ *
+ * The ECC code is calculated by the FPGA.  All we have to do is read the values
+ * from the FPGA registers.
+ *
+ * Note: We read from the inverted registers, since data is inverted before
+ * the code is calculated. So all 0xff data (blank page) results in all 0xff rs code
+ *
+ */
+static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	volatile unsigned short * rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN);
+	unsigned short value;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		value = *rs_eccn;
+		ecc_code[i] = (unsigned char)value;
+		rs_eccn++;
+	}
+	ecc_code[7] |= 0x0f;	/* set the last four bits (not used) */
+}
+
+/*
+ * rtc_from4_correct_data - hardware specific code to correct data using ECC code
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to generate ECC codes
+ * @ecc1	ECC codes read
+ * @ecc2	ECC codes calculated
+ *
+ * The FPGA tells us fast, if there's an error or not. If no, we go back happy
+ * else we read the ecc results from the fpga and call the rs library to decode
+ * and hopefully correct the error
+ *
+ * For now I use the code, which we read from the FLASH to use the RS lib,
+ * as the syndrom conversion has a unresolved issue.
+ */
+static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2)
+{
+	int i, j, res;
+	unsigned short status; 
+	uint16_t par[6], syn[6], tmp;
+	uint8_t ecc[8];
+        volatile unsigned short *rs_ecc;
+
+	status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CHK));
+
+	if (!(status & RTC_FROM4_RS_ECC_CHK_ERROR)) {
+		return 0;
+	}
+
+	/* Read the syndrom pattern from the FPGA and correct the bitorder */
+	rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
+        for (i = 0; i < 8; i++) {
+                ecc[i] = revbits[(*rs_ecc) & 0xFF];
+                rs_ecc++;
+        }
+
+	/* convert into 6 10bit syndrome fields */
+	par[5] = rs_decoder->index_of[(((uint16_t)ecc[0] >> 0) & 0x0ff) | 
+				      (((uint16_t)ecc[1] << 8) & 0x300)];
+	par[4] = rs_decoder->index_of[(((uint16_t)ecc[1] >> 2) & 0x03f) |
+				      (((uint16_t)ecc[2] << 6) & 0x3c0)];
+	par[3] = rs_decoder->index_of[(((uint16_t)ecc[2] >> 4) & 0x00f) |
+				      (((uint16_t)ecc[3] << 4) & 0x3f0)];
+	par[2] = rs_decoder->index_of[(((uint16_t)ecc[3] >> 6) & 0x003) |
+				      (((uint16_t)ecc[4] << 2) & 0x3fc)];
+	par[1] = rs_decoder->index_of[(((uint16_t)ecc[5] >> 0) & 0x0ff) |
+				      (((uint16_t)ecc[6] << 8) & 0x300)];
+	par[0] = (((uint16_t)ecc[6] >> 2) & 0x03f) | (((uint16_t)ecc[7] << 6) & 0x3c0);
+
+	/* Convert to computable syndrome */
+	for (i = 0; i < 6; i++) {
+		syn[i] = par[0];
+		for (j = 1; j < 6; j++)
+			if (par[j] != rs_decoder->nn)
+				syn[i] ^= rs_decoder->alpha_to[rs_modnn(rs_decoder, par[j] + i * j)];
+
+		/* Convert to index form */
+		syn[i] = rs_decoder->index_of[syn[i]];
+	}
+
+	/* Let the library code do its magic.*/
+	res = decode_rs8(rs_decoder, buf, par, 512, syn, 0, NULL, 0xff, NULL);
+	if (res > 0) {
+		DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " 
+			"ECC corrected %d errors on read\n", res);
+	}
+	return res;
+}
+#endif
+
+/*
+ * Main initialization routine
+ */
+int __init rtc_from4_init (void)
+{
+	struct nand_chip *this;
+	unsigned short bcr1, bcr2, wcr2;
+
+	/* Allocate memory for MTD device structure and private data */
+	rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!rtc_from4_mtd) {
+		printk ("Unable to allocate Renesas NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&rtc_from4_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) rtc_from4_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	rtc_from4_mtd->priv = this;
+
+	/* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */
+	bcr1 = *SH77X9_BCR1 & ~0x0002;
+	bcr1 |= 0x0002;
+	*SH77X9_BCR1 = bcr1;
+
+	/* set */
+	bcr2 = *SH77X9_BCR2 & ~0x0c00;
+	bcr2 |= 0x0800;
+	*SH77X9_BCR2 = bcr2;
+
+	/* set area 5 wait states */
+	wcr2 = *SH77X9_WCR2 & ~0x1c00;
+	wcr2 |= 0x1c00;
+	*SH77X9_WCR2 = wcr2;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = rtc_from4_fio_base;
+	this->IO_ADDR_W = rtc_from4_fio_base;
+	/* Set address of hardware control function */
+	this->hwcontrol = rtc_from4_hwcontrol;
+	/* Set address of chip select function */
+        this->select_chip = rtc_from4_nand_select_chip;
+	/* command delay time (in us) */
+	this->chip_delay = 100;
+	/* return the status of the Ready/Busy line */
+	this->dev_ready = rtc_from4_nand_device_ready;
+
+#ifdef RTC_FROM4_HWECC
+	printk(KERN_INFO "rtc_from4_init: using hardware ECC detection.\n");
+
+        this->eccmode = NAND_ECC_HW8_512;
+	this->options |= NAND_HWECC_SYNDROME;
+	/* set the nand_oobinfo to support FPGA H/W error detection */
+	this->autooob = &rtc_from4_nand_oobinfo;
+	this->enable_hwecc = rtc_from4_enable_hwecc;
+	this->calculate_ecc = rtc_from4_calculate_ecc;
+	this->correct_data = rtc_from4_correct_data;
+#else
+	printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n");
+
+	this->eccmode = NAND_ECC_SOFT;
+#endif
+
+	/* set the bad block tables to support debugging */
+	this->bbt_td = &rtc_from4_bbt_main_descr;
+	this->bbt_md = &rtc_from4_bbt_mirror_descr;
+
+	/* Scan to find existence of the device */
+	if (nand_scan(rtc_from4_mtd, RTC_FROM4_MAX_CHIPS)) {
+		kfree(rtc_from4_mtd);
+		return -ENXIO;
+	}
+
+	/* Register the partitions */
+	add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS);
+
+#ifdef RTC_FROM4_HWECC
+	/* We could create the decoder on demand, if memory is a concern.
+	 * This way we have it handy, if an error happens 
+	 *
+	 * Symbolsize is 10 (bits)
+	 * Primitve polynomial is x^10+x^3+1
+	 * first consecutive root is 0
+	 * primitve element to generate roots = 1
+	 * generator polinomial degree = 6
+	 */
+	rs_decoder = init_rs(10, 0x409, 0, 1, 6);
+	if (!rs_decoder) {
+		printk (KERN_ERR "Could not create a RS decoder\n");
+		nand_release(rtc_from4_mtd);
+		kfree(rtc_from4_mtd);
+		return -ENOMEM;
+	}
+#endif
+	/* Return happy */
+	return 0;
+}
+module_init(rtc_from4_init);
+
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit rtc_from4_cleanup (void)
+{
+	/* Release resource, unregister partitions */
+	nand_release(rtc_from4_mtd);
+
+	/* Free the MTD device structure */
+	kfree (rtc_from4_mtd);
+
+#ifdef RTC_FROM4_HWECC
+	/* Free the reed solomon resources */
+	if (rs_decoder) {
+		free_rs(rs_decoder);
+	}
+#endif
+}
+module_exit(rtc_from4_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("d.marlin <dmarlin@redhat.com");
+MODULE_DESCRIPTION("Board-specific glue layer for AG-AND flash on Renesas FROM_BOARD4");
+
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
new file mode 100644
index 000000000000..d05e9b97947d
--- /dev/null
+++ b/drivers/mtd/nand/s3c2410.c
@@ -0,0 +1,704 @@
+/* linux/drivers/mtd/nand/s3c2410.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2410 NAND driver
+ *
+ * Changelog:
+ *	21-Sep-2004  BJD  Initial version
+ *	23-Sep-2004  BJD  Mulitple device support
+ *	28-Sep-2004  BJD  Fixed ECC placement for Hardware mode
+ *	12-Oct-2004  BJD  Fixed errors in use of platform data
+ *
+ * $Id: s3c2410.c,v 1.7 2005/01/05 18:05:14 dwmw2 Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <config/mtd/nand/s3c2410/hwecc.h>
+#include <config/mtd/nand/s3c2410/debug.h>
+
+#ifdef CONFIG_MTD_NAND_S3C2410_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/regs-nand.h>
+#include <asm/arch/nand.h>
+
+#define PFX "s3c2410-nand: "
+
+#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
+static int hardware_ecc = 1;
+#else
+static int hardware_ecc = 0;
+#endif
+
+/* new oob placement block for use with hardware ecc generation
+ */
+
+static struct nand_oobinfo nand_hw_eccoob = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 3,
+	.eccpos = {0, 1, 2 },
+	.oobfree = { {8, 8} }
+};
+
+/* controller and mtd information */
+
+struct s3c2410_nand_info;
+
+struct s3c2410_nand_mtd {
+	struct mtd_info			mtd;
+	struct nand_chip		chip;
+	struct s3c2410_nand_set		*set;
+	struct s3c2410_nand_info	*info;
+	int				scan_res;
+};
+
+/* overview of the s3c2410 nand state */
+
+struct s3c2410_nand_info {
+	/* mtd info */
+	struct nand_hw_control		controller;
+	struct s3c2410_nand_mtd		*mtds;
+	struct s3c2410_platform_nand	*platform;
+
+	/* device info */
+	struct device			*device;
+	struct resource			*area;
+	struct clk			*clk;
+	void				*regs;
+	int				mtd_count;
+};
+
+/* conversion functions */
+
+static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct s3c2410_nand_mtd, mtd);
+}
+
+static struct s3c2410_nand_info *s3c2410_nand_mtd_toinfo(struct mtd_info *mtd)
+{
+	return s3c2410_nand_mtd_toours(mtd)->info;
+}
+
+static struct s3c2410_nand_info *to_nand_info(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+
+static struct s3c2410_platform_nand *to_nand_plat(struct device *dev)
+{
+	return dev->platform_data;
+}
+
+/* timing calculations */
+
+#define NS_IN_KHZ 10000000
+
+static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max)
+{
+	int result;
+
+	result = (wanted * NS_IN_KHZ) / clk;
+	result++;
+
+	pr_debug("result %d from %ld, %d\n", result, clk, wanted);
+
+	if (result > max) {
+		printk("%d ns is too big for current clock rate %ld\n",
+		       wanted, clk);
+		return -1;
+	}
+
+	if (result < 1)
+		result = 1;
+
+	return result;
+}
+
+#define to_ns(ticks,clk) (((clk) * (ticks)) / NS_IN_KHZ)
+
+/* controller setup */
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, 
+			       struct device *dev)
+{
+	struct s3c2410_platform_nand *plat = to_nand_plat(dev);
+	unsigned int tacls, twrph0, twrph1;
+	unsigned long clkrate = clk_get_rate(info->clk);
+	unsigned long cfg;
+
+	/* calculate the timing information for the controller */
+
+	if (plat != NULL) {
+		tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 8);
+		twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8);
+		twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8);
+	} else {
+		/* default timings */
+		tacls = 8;
+		twrph0 = 8;
+		twrph1 = 8;
+	}
+	
+	if (tacls < 0 || twrph0 < 0 || twrph1 < 0) {
+		printk(KERN_ERR PFX "cannot get timings suitable for board\n");
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO PFX "timing: Tacls %ldns, Twrph0 %ldns, Twrph1 %ldns\n",
+	       to_ns(tacls, clkrate),
+	       to_ns(twrph0, clkrate),
+	       to_ns(twrph1, clkrate));
+
+	cfg  = S3C2410_NFCONF_EN;
+	cfg |= S3C2410_NFCONF_TACLS(tacls-1);
+	cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);
+	cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);
+
+	pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);
+
+	writel(cfg, info->regs + S3C2410_NFCONF);
+	return 0;
+}
+
+/* select chip */
+
+static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct s3c2410_nand_info *info;
+	struct s3c2410_nand_mtd *nmtd; 
+	struct nand_chip *this = mtd->priv;
+	unsigned long cur;
+
+	nmtd = this->priv;
+	info = nmtd->info;
+
+	cur = readl(info->regs + S3C2410_NFCONF);
+
+	if (chip == -1) {
+		cur |= S3C2410_NFCONF_nFCE;
+	} else {
+		if (chip > nmtd->set->nr_chips) {
+			printk(KERN_ERR PFX "chip %d out of range\n", chip);
+			return;
+		}
+
+		if (info->platform != NULL) {
+			if (info->platform->select_chip != NULL)
+				(info->platform->select_chip)(nmtd->set, chip);
+		}
+
+		cur &= ~S3C2410_NFCONF_nFCE;
+	}
+
+	writel(cur, info->regs + S3C2410_NFCONF);
+}
+
+/* command and control functions */
+
+static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long cur;
+
+	switch (cmd) {
+	case NAND_CTL_SETNCE:
+		cur = readl(info->regs + S3C2410_NFCONF);
+		cur &= ~S3C2410_NFCONF_nFCE;
+		writel(cur, info->regs + S3C2410_NFCONF);
+		break;
+
+	case NAND_CTL_CLRNCE:
+		cur = readl(info->regs + S3C2410_NFCONF);
+		cur |= S3C2410_NFCONF_nFCE;
+		writel(cur, info->regs + S3C2410_NFCONF);
+		break;
+
+		/* we don't need to implement these */
+	case NAND_CTL_SETCLE:
+	case NAND_CTL_CLRCLE:
+	case NAND_CTL_SETALE:
+	case NAND_CTL_CLRALE:
+		pr_debug(PFX "s3c2410_nand_hwcontrol(%d) unusedn", cmd);
+		break;
+	}
+}
+
+/* s3c2410_nand_command
+ *
+ * This function implements sending commands and the relevant address
+ * information to the chip, via the hardware controller. Since the
+ * S3C2410 generates the correct ALE/CLE signaling automatically, we
+ * do not need to use hwcontrol.
+*/
+
+static void s3c2410_nand_command (struct mtd_info *mtd, unsigned command,
+				  int column, int page_addr)
+{
+	register struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	register struct nand_chip *this = mtd->priv;
+
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		
+		writeb(readcmd, info->regs + S3C2410_NFCMD);
+	}
+	writeb(command, info->regs + S3C2410_NFCMD);
+
+	/* Set ALE and clear CLE to start address cycle */
+
+	if (column != -1 || page_addr != -1) {
+
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (this->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			writeb(column, info->regs + S3C2410_NFADDR);
+		}
+		if (page_addr != -1) {
+			writeb((unsigned char) (page_addr), info->regs + S3C2410_NFADDR);
+			writeb((unsigned char) (page_addr >> 8), info->regs + S3C2410_NFADDR);
+			/* One more address cycle for higher density devices */
+			if (this->chipsize & 0x0c000000) 
+				writeb((unsigned char) ((page_addr >> 16) & 0x0f),
+				       info->regs + S3C2410_NFADDR);
+		}
+		/* Latch in address */
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+
+		udelay(this->chip_delay);
+		writeb(NAND_CMD_STATUS, info->regs + S3C2410_NFCMD);
+
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+
+/* s3c2410_nand_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+*/
+
+static int s3c2410_nand_devready(struct mtd_info *mtd)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	
+	return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
+}
+
+/* ECC handling functions */
+
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+				     u_char *read_ecc, u_char *calc_ecc)
+{
+	pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n",
+		 mtd, dat, read_ecc, calc_ecc);
+
+	pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",
+		 read_ecc[0], read_ecc[1], read_ecc[2],
+		 calc_ecc[0], calc_ecc[1], calc_ecc[2]);
+
+	if (read_ecc[0] == calc_ecc[0] &&
+	    read_ecc[1] == calc_ecc[1] &&
+	    read_ecc[2] == calc_ecc[2]) 
+		return 0;
+
+	/* we curently have no method for correcting the error */
+
+	return -1;
+}
+
+static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ctrl;
+
+	ctrl = readl(info->regs + S3C2410_NFCONF);
+	ctrl |= S3C2410_NFCONF_INITECC;
+	writel(ctrl, info->regs + S3C2410_NFCONF);
+}
+
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
+				      const u_char *dat, u_char *ecc_code)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+	ecc_code[0] = readb(info->regs + S3C2410_NFECC + 0);
+	ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
+	ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
+
+	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n",
+		 ecc_code[0], ecc_code[1], ecc_code[2]);
+
+	return 0;
+}
+
+
+/* over-ride the standard functions for a little more speed? */
+
+static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	readsb(this->IO_ADDR_R, buf, len);
+}
+
+static void s3c2410_nand_write_buf(struct mtd_info *mtd,
+				   const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	writesb(this->IO_ADDR_W, buf, len);
+}
+
+/* device management functions */
+
+static int s3c2410_nand_remove(struct device *dev)
+{
+	struct s3c2410_nand_info *info = to_nand_info(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	if (info == NULL) 
+		return 0;
+
+	/* first thing we need to do is release all our mtds
+	 * and their partitions, then go through freeing the
+	 * resources used 
+	 */
+	
+	if (info->mtds != NULL) {
+		struct s3c2410_nand_mtd *ptr = info->mtds;
+		int mtdno;
+
+		for (mtdno = 0; mtdno < info->mtd_count; mtdno++, ptr++) {
+			pr_debug("releasing mtd %d (%p)\n", mtdno, ptr);
+			nand_release(&ptr->mtd);
+		}
+
+		kfree(info->mtds);
+	}
+
+	/* free the common resources */
+
+	if (info->clk != NULL && !IS_ERR(info->clk)) {
+		clk_disable(info->clk);
+		clk_unuse(info->clk);
+		clk_put(info->clk);
+	}
+
+	if (info->regs != NULL) {
+		iounmap(info->regs);
+		info->regs = NULL;
+	}
+
+	if (info->area != NULL) {
+		release_resource(info->area);
+		kfree(info->area);
+		info->area = NULL;
+	}
+
+	kfree(info);
+
+	return 0;
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
+				      struct s3c2410_nand_mtd *mtd,
+				      struct s3c2410_nand_set *set)
+{
+	if (set == NULL)
+		return add_mtd_device(&mtd->mtd);
+
+	if (set->nr_partitions > 0 && set->partitions != NULL) {
+		return add_mtd_partitions(&mtd->mtd,
+					  set->partitions,
+					  set->nr_partitions);
+	}
+
+	return add_mtd_device(&mtd->mtd);
+}
+#else
+static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
+				      struct s3c2410_nand_mtd *mtd,
+				      struct s3c2410_nand_set *set)
+{
+	return add_mtd_device(&mtd->mtd);
+}
+#endif
+
+/* s3c2410_nand_init_chip
+ *
+ * init a single instance of an chip 
+*/
+
+static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
+				   struct s3c2410_nand_mtd *nmtd,
+				   struct s3c2410_nand_set *set)
+{
+	struct nand_chip *chip = &nmtd->chip;
+
+	chip->IO_ADDR_R	   = (char *)info->regs + S3C2410_NFDATA;
+	chip->IO_ADDR_W    = (char *)info->regs + S3C2410_NFDATA;
+	chip->hwcontrol    = s3c2410_nand_hwcontrol;
+	chip->dev_ready    = s3c2410_nand_devready;
+	chip->cmdfunc      = s3c2410_nand_command;
+	chip->write_buf    = s3c2410_nand_write_buf;
+	chip->read_buf     = s3c2410_nand_read_buf;
+	chip->select_chip  = s3c2410_nand_select_chip;
+	chip->chip_delay   = 50;
+	chip->priv	   = nmtd;
+	chip->options	   = 0;
+	chip->controller   = &info->controller;
+
+	nmtd->info	   = info;
+	nmtd->mtd.priv	   = chip;
+	nmtd->set	   = set;
+
+	if (hardware_ecc) {
+		chip->correct_data  = s3c2410_nand_correct_data;
+		chip->enable_hwecc  = s3c2410_nand_enable_hwecc;
+		chip->calculate_ecc = s3c2410_nand_calculate_ecc;
+		chip->eccmode	    = NAND_ECC_HW3_512;
+		chip->autooob       = &nand_hw_eccoob;
+	} else {
+		chip->eccmode	    = NAND_ECC_SOFT;
+	}
+}
+
+/* s3c2410_nand_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices
+*/
+
+static int s3c2410_nand_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c2410_platform_nand *plat = to_nand_plat(dev);
+	struct s3c2410_nand_info *info;
+	struct s3c2410_nand_mtd *nmtd;
+	struct s3c2410_nand_set *sets;
+	struct resource *res;
+	int err = 0;
+	int size;
+	int nr_sets;
+	int setno;
+
+	pr_debug("s3c2410_nand_probe(%p)\n", dev);
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		printk(KERN_ERR PFX "no memory for flash info\n");
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	memzero(info, sizeof(*info));
+	dev_set_drvdata(dev, info);
+
+	spin_lock_init(&info->controller.lock);
+
+	/* get the clock source and enable it */
+
+	info->clk = clk_get(dev, "nand");
+	if (IS_ERR(info->clk)) {
+		printk(KERN_ERR PFX "failed to get clock");
+		err = -ENOENT;
+		goto exit_error;
+	}
+
+	clk_use(info->clk);
+	clk_enable(info->clk);
+
+	/* allocate and map the resource */
+
+	res = pdev->resource;  /* assume that the flash has one resource */
+	size = res->end - res->start + 1;
+
+	info->area = request_mem_region(res->start, size, pdev->name);
+
+	if (info->area == NULL) {
+		printk(KERN_ERR PFX "cannot reserve register region\n");
+		err = -ENOENT;
+		goto exit_error;
+	}
+
+	info->device = dev;
+	info->platform = plat;
+	info->regs = ioremap(res->start, size);
+
+	if (info->regs == NULL) {
+		printk(KERN_ERR PFX "cannot reserve register region\n");
+		err = -EIO;
+		goto exit_error;
+	}		
+
+	printk(KERN_INFO PFX "mapped registers at %p\n", info->regs);
+
+	/* initialise the hardware */
+
+	err = s3c2410_nand_inithw(info, dev);
+	if (err != 0)
+		goto exit_error;
+
+	sets = (plat != NULL) ? plat->sets : NULL;
+	nr_sets = (plat != NULL) ? plat->nr_sets : 1;
+
+	info->mtd_count = nr_sets;
+
+	/* allocate our information */
+
+	size = nr_sets * sizeof(*info->mtds);
+	info->mtds = kmalloc(size, GFP_KERNEL);
+	if (info->mtds == NULL) {
+		printk(KERN_ERR PFX "failed to allocate mtd storage\n");
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	memzero(info->mtds, size);
+
+	/* initialise all possible chips */
+
+	nmtd = info->mtds;
+
+	for (setno = 0; setno < nr_sets; setno++, nmtd++) {
+		pr_debug("initialising set %d (%p, info %p)\n",
+			 setno, nmtd, info);
+		
+		s3c2410_nand_init_chip(info, nmtd, sets);
+
+		nmtd->scan_res = nand_scan(&nmtd->mtd,
+					   (sets) ? sets->nr_chips : 1);
+
+		if (nmtd->scan_res == 0) {
+			s3c2410_nand_add_partition(info, nmtd, sets);
+		}
+
+		if (sets != NULL)
+			sets++;
+	}
+	
+	pr_debug("initialised ok\n");
+	return 0;
+
+ exit_error:
+	s3c2410_nand_remove(dev);
+
+	if (err == 0)
+		err = -EINVAL;
+	return err;
+}
+
+static struct device_driver s3c2410_nand_driver = {
+	.name		= "s3c2410-nand",
+	.bus		= &platform_bus_type,
+	.probe		= s3c2410_nand_probe,
+	.remove		= s3c2410_nand_remove,
+};
+
+static int __init s3c2410_nand_init(void)
+{
+	printk("S3C2410 NAND Driver, (c) 2004 Simtec Electronics\n");
+	return driver_register(&s3c2410_nand_driver);
+}
+
+static void __exit s3c2410_nand_exit(void)
+{
+	driver_unregister(&s3c2410_nand_driver);
+}
+
+module_init(s3c2410_nand_init);
+module_exit(s3c2410_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C2410 MTD NAND driver");
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
new file mode 100755
index 000000000000..29572793334c
--- /dev/null
+++ b/drivers/mtd/nand/sharpsl.c
@@ -0,0 +1,260 @@
+/*
+ * drivers/mtd/nand/sharpsl.c
+ *
+ *  Copyright (C) 2004 Richard Purdie
+ *
+ *  $Id: sharpsl.c,v 1.3 2005/01/03 14:53:50 rpurdie Exp $
+ *
+ *  Based on Sharp's NAND driver sharp_sl.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static void __iomem *sharpsl_io_base;
+static int sharpsl_phys_base = 0x0C000000;
+
+/* register offset */
+#define ECCLPLB	 	sharpsl_io_base+0x00	/* line parity 7 - 0 bit */
+#define ECCLPUB	 	sharpsl_io_base+0x04	/* line parity 15 - 8 bit */
+#define ECCCP	   	sharpsl_io_base+0x08	/* column parity 5 - 0 bit */
+#define ECCCNTR	 	sharpsl_io_base+0x0C	/* ECC byte counter */
+#define ECCCLRR	 	sharpsl_io_base+0x10	/* cleare ECC */
+#define FLASHIO	 	sharpsl_io_base+0x14	/* Flash I/O */
+#define FLASHCTL	sharpsl_io_base+0x18	/* Flash Control */
+
+/* Flash control bit */
+#define FLRYBY		(1 << 5)
+#define FLCE1		(1 << 4)
+#define FLWP		(1 << 3)
+#define FLALE		(1 << 2)
+#define FLCLE		(1 << 1)
+#define FLCE0		(1 << 0)
+
+
+/*
+ * MTD structure for SharpSL
+ */
+static struct mtd_info *sharpsl_mtd = NULL;
+
+/*
+ * Define partitions for flash device
+ */
+#define DEFAULT_NUM_PARTITIONS 3
+
+static int nr_partitions;
+static struct mtd_partition sharpsl_nand_default_partition_info[] = {
+	{
+	.name = "System Area",
+	.offset = 0,
+	.size = 7 * 1024 * 1024,
+	},
+	{
+	.name = "Root Filesystem",
+	.offset = 7 * 1024 * 1024,
+	.size = 30 * 1024 * 1024,
+	},
+	{
+	.name = "Home Filesystem",
+	.offset = MTDPART_OFS_APPEND ,
+	.size = MTDPART_SIZ_FULL ,
+	},
+};
+
+/* 
+ *	hardware specific access to control-lines
+ */
+static void
+sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
+{
+	switch (cmd) {
+	case NAND_CTL_SETCLE: 
+		writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
+		break;
+	case NAND_CTL_CLRCLE:
+		writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
+		break;
+
+	case NAND_CTL_SETALE:
+		writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
+		break;
+	case NAND_CTL_CLRALE:
+		writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
+		break;
+
+	case NAND_CTL_SETNCE: 
+		writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
+		break;
+	case NAND_CTL_CLRNCE: 
+		writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
+		break;
+	}
+}
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static int
+sharpsl_nand_dev_ready(struct mtd_info* mtd)
+{
+	return !((readb(FLASHCTL) & FLRYBY) == 0);
+}
+
+static void
+sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode)
+{
+	writeb(0 ,ECCCLRR);
+}
+
+static int
+sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
+				u_char* ecc_code)
+{
+	ecc_code[0] = ~readb(ECCLPUB);
+	ecc_code[1] = ~readb(ECCLPLB);
+	ecc_code[2] = (~readb(ECCCP) << 2) | 0x03;
+	return readb(ECCCNTR) != 0;
+}
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+
+/*
+ * Main initialization routine
+ */
+int __init
+sharpsl_nand_init(void)
+{
+	struct nand_chip *this;
+	struct mtd_partition* sharpsl_partition_info;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	sharpsl_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
+				GFP_KERNEL);
+	if (!sharpsl_mtd) {
+		printk ("Unable to allocate SharpSL NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+	
+	/* map physical adress */
+	sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
+	if(!sharpsl_io_base){
+		printk("ioremap to access Sharp SL NAND chip failed\n");
+		kfree(sharpsl_mtd);
+		return -EIO;
+	}
+	
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&sharpsl_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) sharpsl_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	sharpsl_mtd->priv = this;
+
+	/*
+	 * PXA initialize
+	 */
+	writeb(readb(FLASHCTL) | FLWP, FLASHCTL);
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = FLASHIO;
+	this->IO_ADDR_W = FLASHIO;
+	/* Set address of hardware control function */
+	this->hwcontrol = sharpsl_nand_hwcontrol;
+	this->dev_ready = sharpsl_nand_dev_ready;
+	/* 15 us command delay time */
+	this->chip_delay = 15;
+	/* set eccmode using hardware ECC */
+	this->eccmode = NAND_ECC_HW3_256;
+	this->enable_hwecc = sharpsl_nand_enable_hwecc;
+	this->calculate_ecc = sharpsl_nand_calculate_ecc;
+	this->correct_data = nand_correct_data;
+	this->badblock_pattern = &sharpsl_bbt;
+
+	/* Scan to find existence of the device */
+	err=nand_scan(sharpsl_mtd,1);
+	if (err) {
+		iounmap(sharpsl_io_base);
+		kfree(sharpsl_mtd);
+		return err;
+	}
+
+	/* Register the partitions */
+	sharpsl_mtd->name = "sharpsl-nand";
+	nr_partitions = parse_mtd_partitions(sharpsl_mtd, part_probes,
+						&sharpsl_partition_info, 0);
+						 
+	if (nr_partitions <= 0) {
+		nr_partitions = DEFAULT_NUM_PARTITIONS;
+		sharpsl_partition_info = sharpsl_nand_default_partition_info;
+		if (machine_is_poodle()) {
+			sharpsl_partition_info[1].size=22 * 1024 * 1024;
+		} else if (machine_is_corgi() || machine_is_shepherd()) {
+			sharpsl_partition_info[1].size=25 * 1024 * 1024;
+		} else if (machine_is_husky()) {
+			sharpsl_partition_info[1].size=53 * 1024 * 1024;
+		} 		
+	}
+
+	if (machine_is_husky()) {
+		/* Need to use small eraseblock size for backward compatibility */
+		sharpsl_mtd->flags |= MTD_NO_VIRTBLOCKS;
+	}
+
+	add_mtd_partitions(sharpsl_mtd, sharpsl_partition_info, nr_partitions);
+
+	/* Return happy */
+	return 0;
+}
+module_init(sharpsl_nand_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit sharpsl_nand_cleanup(void)
+{
+	struct nand_chip *this = (struct nand_chip *) &sharpsl_mtd[1];
+
+	/* Release resources, unregister device */
+	nand_release(sharpsl_mtd);
+
+	iounmap(sharpsl_io_base);
+
+	/* Free the MTD device structure */
+	kfree(sharpsl_mtd);
+}
+module_exit(sharpsl_nand_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
new file mode 100644
index 000000000000..b777c412b758
--- /dev/null
+++ b/drivers/mtd/nand/spia.c
@@ -0,0 +1,173 @@
+/*
+ *  drivers/mtd/nand/spia.c
+ *
+ *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ *
+ *	10-29-2001 TG	change to support hardwarespecific access
+ *			to controllines	(due to change in nand.c)
+ *			page_cache added
+ *
+ * $Id: spia.c,v 1.24 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device found on the
+ *   SPIA board which utilizes the Toshiba TC58V64AFT part. This is
+ *   a 64Mibit (8MiB x 8 bits) NAND flash device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
+/*
+ * MTD structure for SPIA board
+ */
+static struct mtd_info *spia_mtd = NULL;
+
+/*
+ * Values specific to the SPIA board (used with EP7212 processor)
+ */
+#define SPIA_IO_BASE	0xd0000000	/* Start of EP7212 IO address space */
+#define SPIA_FIO_BASE	0xf0000000	/* Address where flash is mapped */
+#define SPIA_PEDR	0x0080		/*
+					 * IO offset to Port E data register
+					 * where the CLE, ALE and NCE pins
+					 * are wired to.
+					 */
+#define SPIA_PEDDR	0x00c0		/*
+					 * IO offset to Port E data direction
+					 * register so we can control the IO
+					 * lines.
+					 */
+
+/*
+ * Module stuff
+ */
+
+static int spia_io_base = SPIA_IO_BASE;
+static int spia_fio_base = SPIA_FIO_BASE;
+static int spia_pedr = SPIA_PEDR;
+static int spia_peddr = SPIA_PEDDR;
+
+module_param(spia_io_base, int, 0);
+module_param(spia_fio_base, int, 0);
+module_param(spia_pedr, int, 0);
+module_param(spia_peddr, int, 0);
+
+/*
+ * Define partitions for flash device
+ */
+const static struct mtd_partition partition_info[] = {
+	{
+		.name	= "SPIA flash partition 1",
+		.offset	= 0,
+		.size	= 2*1024*1024
+	},
+	{
+		.name	= "SPIA flash partition 2",
+		.offset	= 2*1024*1024,
+		.size	= 6*1024*1024
+	}
+};
+#define NUM_PARTITIONS 2
+
+
+/* 
+ *	hardware specific access to control-lines
+*/
+static void spia_hwcontrol(struct mtd_info *mtd, int cmd){
+
+    switch(cmd){
+
+	case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x01; break;
+	case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break;
+
+	case NAND_CTL_SETALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x02; break;
+	case NAND_CTL_CLRALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x02; break;
+
+	case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break;
+	case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x04; break;
+    }
+}
+
+/*
+ * Main initialization routine
+ */
+int __init spia_init (void)
+{
+	struct nand_chip *this;
+
+	/* Allocate memory for MTD device structure and private data */
+	spia_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!spia_mtd) {
+		printk ("Unable to allocate SPIA NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&spia_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) spia_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	spia_mtd->priv = this;
+
+	/*
+	 * Set GPIO Port E control register so that the pins are configured
+	 * to be outputs for controlling the NAND flash.
+	 */
+	(*(volatile unsigned char *) (spia_io_base + spia_peddr)) = 0x07;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = (void __iomem *) spia_fio_base;
+	this->IO_ADDR_W = (void __iomem *) spia_fio_base;
+	/* Set address of hardware control function */
+	this->hwcontrol = spia_hwcontrol;
+	/* 15 us command delay time */
+	this->chip_delay = 15;		
+
+	/* Scan to find existence of the device */
+	if (nand_scan (spia_mtd, 1)) {
+		kfree (spia_mtd);
+		return -ENXIO;
+	}
+
+	/* Register the partitions */
+	add_mtd_partitions(spia_mtd, partition_info, NUM_PARTITIONS);
+
+	/* Return happy */
+	return 0;
+}
+module_init(spia_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit spia_cleanup (void)
+{
+	/* Release resources, unregister device */
+	nand_release (spia_mtd);
+
+	/* Free the MTD device structure */
+	kfree (spia_mtd);
+}
+module_exit(spia_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board");
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
new file mode 100644
index 000000000000..52c808fb5fa9
--- /dev/null
+++ b/drivers/mtd/nand/toto.c
@@ -0,0 +1,205 @@
+/*
+ *  drivers/mtd/nand/toto.c
+ *
+ *  Copyright (c) 2003 Texas Instruments
+ *
+ *  Derived from drivers/mtd/autcpu12.c
+ *
+ *  Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device found on the
+ *   TI fido board. It supports 32MiB and 64MiB cards
+ *
+ * $Id: toto.c,v 1.4 2004/10/05 13:50:20 gleixner Exp $
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/sizes.h>
+#include <asm/arch/toto.h>
+#include <asm/arch-omap1510/hardware.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * MTD structure for TOTO board
+ */
+static struct mtd_info *toto_mtd = NULL;
+
+static unsigned long toto_io_base = OMAP_FLASH_1_BASE;
+
+#define CONFIG_NAND_WORKAROUND 1
+
+#define NAND_NCE 0x4000
+#define NAND_CLE 0x1000
+#define NAND_ALE 0x0002
+#define NAND_MASK (NAND_CLE | NAND_ALE | NAND_NCE)
+
+#define T_NAND_CTL_CLRALE(iob)  gpiosetout(NAND_ALE, 0)
+#define T_NAND_CTL_SETALE(iob)  gpiosetout(NAND_ALE, NAND_ALE)
+#ifdef CONFIG_NAND_WORKAROUND     /* "some" dev boards busted, blue wired to rts2 :( */
+#define T_NAND_CTL_CLRCLE(iob)  gpiosetout(NAND_CLE, 0); rts2setout(2, 2)
+#define T_NAND_CTL_SETCLE(iob)  gpiosetout(NAND_CLE, NAND_CLE); rts2setout(2, 0)
+#else
+#define T_NAND_CTL_CLRCLE(iob)  gpiosetout(NAND_CLE, 0)
+#define T_NAND_CTL_SETCLE(iob)  gpiosetout(NAND_CLE, NAND_CLE)
+#endif
+#define T_NAND_CTL_SETNCE(iob)  gpiosetout(NAND_NCE, 0)
+#define T_NAND_CTL_CLRNCE(iob)  gpiosetout(NAND_NCE, NAND_NCE)
+                
+/*
+ * Define partitions for flash devices
+ */
+
+static struct mtd_partition partition_info64M[] = {
+	{ .name =	"toto kernel partition 1",
+	  .offset =	0,
+	  .size	=	2 * SZ_1M },
+	{ .name =	"toto file sys partition 2",
+	  .offset =	2 * SZ_1M,
+	  .size =	14 * SZ_1M },
+	{ .name =	"toto user partition 3",
+	  .offset =	16 * SZ_1M,
+	  .size =	16 * SZ_1M },
+	{ .name =	"toto devboard extra partition 4",
+	  .offset =	32 * SZ_1M,
+	  .size =	32 * SZ_1M },
+};
+
+static struct mtd_partition partition_info32M[] = {
+	{ .name =	"toto kernel partition 1",
+	  .offset =	0,
+	  .size =	2 * SZ_1M },
+	{ .name =	"toto file sys partition 2",
+	  .offset =	2 * SZ_1M,
+	  .size =	14 * SZ_1M },
+	{ .name =	"toto user partition 3",
+	  .offset =	16 * SZ_1M,
+	  .size =	16 * SZ_1M },
+};
+
+#define NUM_PARTITIONS32M 3
+#define NUM_PARTITIONS64M 4
+/* 
+ *	hardware specific access to control-lines
+*/
+
+static void toto_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+
+	udelay(1); /* hopefully enough time for tc make proceding write to clear */
+	switch(cmd){
+
+		case NAND_CTL_SETCLE: T_NAND_CTL_SETCLE(cmd); break;
+		case NAND_CTL_CLRCLE: T_NAND_CTL_CLRCLE(cmd); break;
+
+		case NAND_CTL_SETALE: T_NAND_CTL_SETALE(cmd); break;
+		case NAND_CTL_CLRALE: T_NAND_CTL_CLRALE(cmd); break;
+
+		case NAND_CTL_SETNCE: T_NAND_CTL_SETNCE(cmd); break;
+		case NAND_CTL_CLRNCE: T_NAND_CTL_CLRNCE(cmd); break;
+	}
+	udelay(1); /* allow time to ensure gpio state to over take memory write */
+}
+
+/*
+ * Main initialization routine
+ */
+int __init toto_init (void)
+{
+	struct nand_chip *this;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	toto_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!toto_mtd) {
+		printk (KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&toto_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) toto_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	toto_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = toto_io_base;
+	this->IO_ADDR_W = toto_io_base;
+	this->hwcontrol = toto_hwcontrol;
+	this->dev_ready = NULL;
+	/* 25 us command delay time */
+	this->chip_delay = 30;		
+	this->eccmode = NAND_ECC_SOFT;
+
+        /* Scan to find existance of the device */
+	if (nand_scan (toto_mtd, 1)) {
+		err = -ENXIO;
+		goto out_mtd;
+	}
+
+	/* Register the partitions */
+	switch(toto_mtd->size){
+		case SZ_64M: add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M); break; 
+		case SZ_32M: add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M); break; 
+		default: {
+			printk (KERN_WARNING "Unsupported Nand device\n"); 
+			err = -ENXIO;
+			goto out_buf;
+		}
+	}
+
+    	gpioreserve(NAND_MASK);  /* claim our gpios */
+    	archflashwp(0,0);	 /* open up flash for writing */
+
+	goto out;
+    
+out_buf:
+	kfree (this->data_buf);    
+out_mtd:
+	kfree (toto_mtd);
+out:
+	return err;
+}
+
+module_init(toto_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit toto_cleanup (void)
+{
+	/* Release resources, unregister device */
+	nand_release (toto_mtd);
+
+	/* Free the MTD device structure */
+	kfree (toto_mtd);
+
+	/* stop flash writes */
+	 archflashwp(0,1);
+	
+	/* release gpios to system */
+	 gpiorelease(NAND_MASK);
+}
+module_exit(toto_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Woodruff <r-woodruff2@ti.com>");
+MODULE_DESCRIPTION("Glue layer for NAND flash on toto board");
diff --git a/drivers/mtd/nand/tx4925ndfmc.c b/drivers/mtd/nand/tx4925ndfmc.c
new file mode 100644
index 000000000000..bba688830c9b
--- /dev/null
+++ b/drivers/mtd/nand/tx4925ndfmc.c
@@ -0,0 +1,416 @@
+/*
+ *  drivers/mtd/tx4925ndfmc.c
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device found on the
+ *   Toshiba RBTX4925 reference board, which is a SmartMediaCard. It supports 
+ *   16MiB, 32MiB and 64MiB cards.
+ *
+ * Author: MontaVista Software, Inc.  source@mvista.com
+ *
+ * Derived from drivers/mtd/autcpu12.c
+ *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * $Id: tx4925ndfmc.c,v 1.5 2004/10/05 13:50:20 gleixner Exp $
+ *
+ * Copyright (C) 2001 Toshiba Corporation 
+ * 
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/tx4925/tx4925_nand.h>
+
+extern struct nand_oobinfo jffs2_oobinfo;
+
+/*
+ * MTD structure for RBTX4925 board
+ */
+static struct mtd_info *tx4925ndfmc_mtd = NULL;
+
+/*
+ * Define partitions for flash devices
+ */
+
+static struct mtd_partition partition_info16k[] = {
+	{ .name = "RBTX4925 flash partition 1",
+	  .offset =  0,
+	  .size =    8 * 0x00100000 },
+	{ .name = "RBTX4925 flash partition 2",
+	  .offset =  8 * 0x00100000,
+	  .size =    8 * 0x00100000 },
+};
+
+static struct mtd_partition partition_info32k[] = {
+	{ .name = "RBTX4925 flash partition 1",
+	  .offset =  0,
+	  .size =    8 * 0x00100000 },
+	{ .name = "RBTX4925 flash partition 2",
+	  .offset = 8 * 0x00100000,
+	  .size =  24 * 0x00100000 },
+};
+
+static struct mtd_partition partition_info64k[] = {
+	{ .name = "User FS",
+	  .offset =  0,
+	  .size =   16 * 0x00100000 },
+	{ .name = "RBTX4925 flash partition 2",
+	  .offset = 16 * 0x00100000,
+	  .size =   48 * 0x00100000},
+};
+
+static struct mtd_partition partition_info128k[] = {
+	{ .name = "Skip bad section",
+	  .offset =  0,
+	  .size =   16 * 0x00100000 },
+	{ .name = "User FS",
+	  .offset = 16 * 0x00100000,
+	  .size =   112 * 0x00100000 },
+};
+#define NUM_PARTITIONS16K  2
+#define NUM_PARTITIONS32K  2
+#define NUM_PARTITIONS64K  2
+#define NUM_PARTITIONS128K 2
+
+/* 
+ *	hardware specific access to control-lines
+*/
+static void tx4925ndfmc_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+
+	switch(cmd){
+
+		case NAND_CTL_SETCLE: 
+			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CLE;
+			break;
+		case NAND_CTL_CLRCLE:
+			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CLE;
+			break;
+		case NAND_CTL_SETALE:
+			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ALE;
+			break;
+		case NAND_CTL_CLRALE: 
+			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ALE;
+			break;
+		case NAND_CTL_SETNCE:
+			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CE;
+			break;
+		case NAND_CTL_CLRNCE:
+			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CE;
+			break;
+		case NAND_CTL_SETWP:
+			tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_WE;
+			break;
+		case NAND_CTL_CLRWP:
+			tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_WE;
+			break;
+	}
+}
+
+/*
+*	read device ready pin
+*/
+static int tx4925ndfmc_device_ready(struct mtd_info *mtd)
+{
+	int ready;
+	ready = (tx4925_ndfmcptr->sr & TX4925_NDSFR_BUSY) ? 0 : 1;
+	return ready;
+}
+void tx4925ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	/* reset first */
+	tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_MASK;
+	tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
+	tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_ENAB;
+}
+static void tx4925ndfmc_disable_ecc(void)
+{
+	tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
+}
+static void tx4925ndfmc_enable_read_ecc(void)
+{
+	tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK;
+	tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_READ;
+}
+void tx4925ndfmc_readecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code){
+	int i;
+	u_char *ecc = ecc_code;
+        tx4925ndfmc_enable_read_ecc();
+	for (i = 0;i < 6;i++,ecc++)
+		*ecc = tx4925_read_nfmc(&(tx4925_ndfmcptr->dtr));
+        tx4925ndfmc_disable_ecc();
+}
+void tx4925ndfmc_device_setup(void)
+{
+
+	*(unsigned char *)0xbb005000 &= ~0x08;
+
+        /* reset NDFMC */
+        tx4925_ndfmcptr->rstr |= TX4925_NDFRSTR_RST;
+	while (tx4925_ndfmcptr->rstr & TX4925_NDFRSTR_RST);       
+
+	/* setup BusSeparete, Hold Time, Strobe Pulse Width */
+	tx4925_ndfmcptr->mcr = TX4925_BSPRT ? TX4925_NDFMCR_BSPRT : 0;
+	tx4925_ndfmcptr->spr = TX4925_HOLD << 4 | TX4925_SPW;             
+}
+static u_char tx4925ndfmc_nand_read_byte(struct mtd_info *mtd)
+{
+        struct nand_chip *this = mtd->priv;
+        return tx4925_read_nfmc(this->IO_ADDR_R);
+}
+
+static void tx4925ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+        struct nand_chip *this = mtd->priv;
+        tx4925_write_nfmc(byte, this->IO_ADDR_W);
+}
+
+static void tx4925ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		tx4925_write_nfmc(buf[i], this->IO_ADDR_W);
+}
+
+static void tx4925ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		buf[i] = tx4925_read_nfmc(this->IO_ADDR_R);
+}
+
+static int tx4925ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		if (buf[i] != tx4925_read_nfmc(this->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Send command to NAND device
+ */
+static void tx4925ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/* Begin command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_SETCLE);
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		this->write_byte(mtd, readcmd);
+	}
+	this->write_byte(mtd, command);
+
+	/* Set ALE and clear CLE to start address cycle */
+	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+	if (column != -1 || page_addr != -1) {
+		this->hwcontrol(mtd, NAND_CTL_SETALE);
+
+		/* Serially input address */
+		if (column != -1)
+			this->write_byte(mtd, column);
+		if (page_addr != -1) {
+			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
+			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+			/* One more address cycle for higher density devices */
+			if (mtd->size & 0x0c000000) 
+				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
+		}
+		/* Latch in address */
+		this->hwcontrol(mtd, NAND_CTL_CLRALE);
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_PAGEPROG:
+		/* Turn off WE */
+		this->hwcontrol (mtd, NAND_CTL_CLRWP);
+                return;
+
+	case NAND_CMD_SEQIN:
+		/* Turn on WE */
+		this->hwcontrol (mtd, NAND_CTL_SETWP);
+                return;
+
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		this->write_byte(mtd, NAND_CMD_STATUS);
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partitio
+n **pparts, char *);
+#endif
+
+/*
+ * Main initialization routine
+ */
+extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+int __init tx4925ndfmc_init (void)
+{
+	struct nand_chip *this;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	tx4925ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!tx4925ndfmc_mtd) {
+		printk ("Unable to allocate RBTX4925 NAND MTD device structure.\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+        tx4925ndfmc_device_setup();
+
+	/* io is indirect via a register so don't need to ioremap address */
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&tx4925ndfmc_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) tx4925ndfmc_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	tx4925ndfmc_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = (void __iomem *)&(tx4925_ndfmcptr->dtr);
+	this->IO_ADDR_W = (void __iomem *)&(tx4925_ndfmcptr->dtr);
+	this->hwcontrol = tx4925ndfmc_hwcontrol;
+	this->enable_hwecc = tx4925ndfmc_enable_hwecc;
+	this->calculate_ecc = tx4925ndfmc_readecc;
+	this->correct_data = nand_correct_data;
+	this->eccmode = NAND_ECC_HW6_512;	
+	this->dev_ready = tx4925ndfmc_device_ready;
+	/* 20 us command delay time */
+	this->chip_delay = 20;		
+        this->read_byte = tx4925ndfmc_nand_read_byte;
+        this->write_byte = tx4925ndfmc_nand_write_byte;
+	this->cmdfunc = tx4925ndfmc_nand_command;
+	this->write_buf = tx4925ndfmc_nand_write_buf;
+	this->read_buf = tx4925ndfmc_nand_read_buf;
+	this->verify_buf = tx4925ndfmc_nand_verify_buf;
+
+	/* Scan to find existance of the device */
+	if (nand_scan (tx4925ndfmc_mtd, 1)) {
+		err = -ENXIO;
+		goto out_ior;
+	}
+
+	/* Register the partitions */
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+        {
+                int mtd_parts_nb = 0;
+                struct mtd_partition *mtd_parts = 0;
+                mtd_parts_nb = parse_cmdline_partitions(tx4925ndfmc_mtd, &mtd_parts, "tx4925ndfmc");
+                if (mtd_parts_nb > 0)
+                        add_mtd_partitions(tx4925ndfmc_mtd, mtd_parts, mtd_parts_nb);
+                else
+                        add_mtd_device(tx4925ndfmc_mtd);
+        }
+#else /* ifdef CONFIG_MTD_CMDLINE_PARTS */
+	switch(tx4925ndfmc_mtd->size){
+		case 0x01000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info16k, NUM_PARTITIONS16K); break;
+		case 0x02000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info32k, NUM_PARTITIONS32K); break;
+		case 0x04000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info64k, NUM_PARTITIONS64K); break; 
+		case 0x08000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info128k, NUM_PARTITIONS128K); break; 
+		default: {
+			printk ("Unsupported SmartMedia device\n"); 
+			err = -ENXIO;
+			goto out_ior;
+		}
+	}
+#endif /* ifdef CONFIG_MTD_CMDLINE_PARTS */
+	goto out;
+
+out_ior:
+out:
+	return err;
+}
+
+module_init(tx4925ndfmc_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit tx4925ndfmc_cleanup (void)
+{
+	/* Release resources, unregister device */
+	nand_release (tx4925ndfmc_mtd);
+
+	/* Free the MTD device structure */
+	kfree (tx4925ndfmc_mtd);
+}
+module_exit(tx4925ndfmc_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
+MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBTX4925");
diff --git a/drivers/mtd/nand/tx4938ndfmc.c b/drivers/mtd/nand/tx4938ndfmc.c
new file mode 100644
index 000000000000..df26e58820b3
--- /dev/null
+++ b/drivers/mtd/nand/tx4938ndfmc.c
@@ -0,0 +1,406 @@
+/*
+ * drivers/mtd/nand/tx4938ndfmc.c
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device connected to
+ *   TX4938 internal NAND Memory Controller.
+ *   TX4938 NDFMC is almost same as TX4925 NDFMC, but register size are 64 bit.
+ *
+ * Author: source@mvista.com
+ *
+ * Based on spia.c by Steven J. Hill
+ *
+ * $Id: tx4938ndfmc.c,v 1.4 2004/10/05 13:50:20 gleixner Exp $
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation 
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <linux/delay.h>
+#include <asm/tx4938/rbtx4938.h>
+
+extern struct nand_oobinfo jffs2_oobinfo;
+
+/*
+ * MTD structure for TX4938 NDFMC
+ */
+static struct mtd_info *tx4938ndfmc_mtd;
+
+/*
+ * Define partitions for flash device
+ */
+#define flush_wb()	(void)tx4938_ndfmcptr->mcr;
+
+#define NUM_PARTITIONS  	3
+#define NUMBER_OF_CIS_BLOCKS	24
+#define SIZE_OF_BLOCK		0x00004000
+#define NUMBER_OF_BLOCK_PER_ZONE 1024
+#define SIZE_OF_ZONE		(NUMBER_OF_BLOCK_PER_ZONE * SIZE_OF_BLOCK)
+#ifndef CONFIG_MTD_CMDLINE_PARTS
+/*
+ * You can use the following sample of MTD partitions 
+ * on the NAND Flash Memory 32MB or more.
+ *
+ * The following figure shows the image of the sample partition on
+ * the 32MB NAND Flash Memory. 
+ *
+ *   Block No.
+ *    0 +-----------------------------+ ------
+ *      |             CIS             |   ^
+ *   24 +-----------------------------+   |
+ *      |         kernel image        |   | Zone 0
+ *      |                             |   |
+ *      +-----------------------------+   |
+ * 1023 |         unused area         |   v
+ *      +-----------------------------+ ------
+ * 1024 |            JFFS2            |   ^
+ *      |                             |   |
+ *      |                             |   | Zone 1
+ *      |                             |   |
+ *      |                             |   |
+ *      |                             |   v
+ * 2047 +-----------------------------+ ------
+ *
+ */
+static struct mtd_partition partition_info[NUM_PARTITIONS] = {
+	{
+		.name = "RBTX4938 CIS Area",
+ 		.offset =  0,
+ 		.size =    (NUMBER_OF_CIS_BLOCKS * SIZE_OF_BLOCK),
+ 		.mask_flags  = MTD_WRITEABLE	/* This partition is NOT writable */
+ 	},
+ 	{
+ 		.name = "RBTX4938 kernel image",
+ 		.offset =  MTDPART_OFS_APPEND,
+ 		.size =    8 * 0x00100000,	/* 8MB (Depends on size of kernel image) */
+ 		.mask_flags  = MTD_WRITEABLE	/* This partition is NOT writable */
+ 	},
+ 	{
+ 		.name = "Root FS (JFFS2)",
+ 		.offset =  (0 + SIZE_OF_ZONE),    /* start address of next zone */
+ 		.size =    MTDPART_SIZ_FULL
+ 	},
+};
+#endif
+
+static void tx4938ndfmc_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	switch (cmd) {
+		case NAND_CTL_SETCLE:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CLE;
+			break;
+		case NAND_CTL_CLRCLE:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CLE;
+			break;
+		case NAND_CTL_SETALE:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_ALE;
+			break;
+		case NAND_CTL_CLRALE:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_ALE;
+			break;
+		/* TX4938_NDFMCR_CE bit is 0:high 1:low */
+		case NAND_CTL_SETNCE:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CE;
+			break;
+		case NAND_CTL_CLRNCE:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CE;
+			break;
+		case NAND_CTL_SETWP:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_WE;
+			break;
+		case NAND_CTL_CLRWP:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_WE;
+			break;
+	}
+}
+static int tx4938ndfmc_dev_ready(struct mtd_info *mtd)
+{
+	flush_wb();
+	return !(tx4938_ndfmcptr->sr & TX4938_NDFSR_BUSY);
+}
+static void tx4938ndfmc_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	u32 mcr = tx4938_ndfmcptr->mcr;
+	mcr &= ~TX4938_NDFMCR_ECC_ALL;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_READ;
+	ecc_code[1] = tx4938_ndfmcptr->dtr;
+	ecc_code[0] = tx4938_ndfmcptr->dtr;
+	ecc_code[2] = tx4938_ndfmcptr->dtr;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
+}
+static void tx4938ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	u32 mcr = tx4938_ndfmcptr->mcr;
+	mcr &= ~TX4938_NDFMCR_ECC_ALL;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_RESET;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_ON;
+}
+
+static u_char tx4938ndfmc_nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return tx4938_read_nfmc(this->IO_ADDR_R);
+}
+
+static void tx4938ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	tx4938_write_nfmc(byte, this->IO_ADDR_W);
+}
+
+static void tx4938ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		tx4938_write_nfmc(buf[i], this->IO_ADDR_W);
+}
+
+static void tx4938ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		buf[i] = tx4938_read_nfmc(this->IO_ADDR_R);
+}
+
+static int tx4938ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		if (buf[i] != tx4938_read_nfmc(this->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Send command to NAND device
+ */
+static void tx4938ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/* Begin command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_SETCLE);
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		this->write_byte(mtd, readcmd);
+	}
+	this->write_byte(mtd, command);
+
+	/* Set ALE and clear CLE to start address cycle */
+	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+	if (column != -1 || page_addr != -1) {
+		this->hwcontrol(mtd, NAND_CTL_SETALE);
+
+		/* Serially input address */
+		if (column != -1)
+			this->write_byte(mtd, column);
+		if (page_addr != -1) {
+			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
+			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+			/* One more address cycle for higher density devices */
+			if (mtd->size & 0x0c000000) 
+				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
+		}
+		/* Latch in address */
+		this->hwcontrol(mtd, NAND_CTL_CLRALE);
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_PAGEPROG:
+		/* Turn off WE */
+		this->hwcontrol (mtd, NAND_CTL_CLRWP);
+                return;
+
+	case NAND_CMD_SEQIN:
+		/* Turn on WE */
+		this->hwcontrol (mtd, NAND_CTL_SETWP);
+                return;
+
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		this->write_byte(mtd, NAND_CMD_STATUS);
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, char *);
+#endif
+/*
+ * Main initialization routine
+ */
+int __init tx4938ndfmc_init (void)
+{
+	struct nand_chip *this;
+	int bsprt = 0, hold = 0xf, spw = 0xf;
+	int protected = 0;
+
+	if ((*rbtx4938_piosel_ptr & 0x0c) != 0x08) {
+		printk("TX4938 NDFMC: disabled by IOC PIOSEL\n");
+		return -ENODEV;
+	}
+	bsprt = 1;
+	hold = 2;
+	spw = 9 - 1;	/* 8 GBUSCLK = 80ns (@ GBUSCLK 100MHz) */
+
+	if ((tx4938_ccfgptr->pcfg &
+	     (TX4938_PCFG_ATA_SEL|TX4938_PCFG_ISA_SEL|TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_NDF_SEL) {
+		printk("TX4938 NDFMC: disabled by PCFG.\n");
+		return -ENODEV;
+	}
+
+	/* reset NDFMC */
+	tx4938_ndfmcptr->rstr |= TX4938_NDFRSTR_RST;
+	while (tx4938_ndfmcptr->rstr & TX4938_NDFRSTR_RST)
+		;
+	/* setup BusSeparete, Hold Time, Strobe Pulse Width */
+	tx4938_ndfmcptr->mcr = bsprt ? TX4938_NDFMCR_BSPRT : 0;
+	tx4938_ndfmcptr->spr = hold << 4 | spw;
+
+	/* Allocate memory for MTD device structure and private data */
+	tx4938ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				      GFP_KERNEL);
+	if (!tx4938ndfmc_mtd) {
+		printk ("Unable to allocate TX4938 NDFMC MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&tx4938ndfmc_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) tx4938ndfmc_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	tx4938ndfmc_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = (unsigned long)&tx4938_ndfmcptr->dtr;
+	this->IO_ADDR_W = (unsigned long)&tx4938_ndfmcptr->dtr;
+	this->hwcontrol = tx4938ndfmc_hwcontrol;
+	this->dev_ready = tx4938ndfmc_dev_ready;
+	this->calculate_ecc = tx4938ndfmc_calculate_ecc;
+	this->correct_data = nand_correct_data;
+	this->enable_hwecc = tx4938ndfmc_enable_hwecc;
+	this->eccmode = NAND_ECC_HW3_256;
+	this->chip_delay = 100;
+	this->read_byte = tx4938ndfmc_nand_read_byte;
+	this->write_byte = tx4938ndfmc_nand_write_byte;
+	this->cmdfunc = tx4938ndfmc_nand_command;
+	this->write_buf = tx4938ndfmc_nand_write_buf;
+	this->read_buf = tx4938ndfmc_nand_read_buf;
+	this->verify_buf = tx4938ndfmc_nand_verify_buf;
+
+	/* Scan to find existance of the device */
+	if (nand_scan (tx4938ndfmc_mtd, 1)) {
+		kfree (tx4938ndfmc_mtd);
+		return -ENXIO;
+	}
+
+	if (protected) {
+		printk(KERN_INFO "TX4938 NDFMC: write protected.\n");
+		tx4938ndfmc_mtd->flags &= ~(MTD_WRITEABLE | MTD_ERASEABLE);
+	}
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	{
+		int mtd_parts_nb = 0;
+		struct mtd_partition *mtd_parts = 0;
+		mtd_parts_nb = parse_cmdline_partitions(tx4938ndfmc_mtd, &mtd_parts, "tx4938ndfmc");
+		if (mtd_parts_nb > 0)
+			add_mtd_partitions(tx4938ndfmc_mtd, mtd_parts, mtd_parts_nb);
+		else
+			add_mtd_device(tx4938ndfmc_mtd);
+	}
+#else
+	add_mtd_partitions(tx4938ndfmc_mtd, partition_info, NUM_PARTITIONS );
+#endif
+
+	return 0;
+}
+module_init(tx4938ndfmc_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit tx4938ndfmc_cleanup (void)
+{
+	/* Release resources, unregister device */
+	nand_release (tx4938ndfmc_mtd);
+
+	/* Free the MTD device structure */
+	kfree (tx4938ndfmc_mtd);
+}
+module_exit(tx4938ndfmc_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on TX4938 NDFMC");
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
new file mode 100644
index 000000000000..b2014043634f
--- /dev/null
+++ b/drivers/mtd/nftlcore.c
@@ -0,0 +1,767 @@
+/* Linux driver for NAND Flash Translation Layer      */
+/* (c) 1999 Machine Vision Holdings, Inc.             */
+/* Author: David Woodhouse <dwmw2@infradead.org>      */
+/* $Id: nftlcore.c,v 1.97 2004/11/16 18:28:59 dwmw2 Exp $ */
+
+/*
+  The contents of this file are distributed under the GNU General
+  Public License version 2. The author places no additional
+  restrictions of any kind on it.
+ */
+
+#define PRERELEASE
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/hdreg.h>
+
+#include <linux/kmod.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nftl.h>
+#include <linux/mtd/blktrans.h>
+
+/* maximum number of loops while examining next block, to have a
+   chance to detect consistency problems (they should never happen
+   because of the checks done in the mounting */
+
+#define MAX_LOOPS 10000
+
+
+static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
+{
+	struct NFTLrecord *nftl;
+	unsigned long temp;
+
+	if (mtd->type != MTD_NANDFLASH)
+		return;
+	/* OK, this is moderately ugly.  But probably safe.  Alternatives? */
+	if (memcmp(mtd->name, "DiskOnChip", 10))
+		return;
+
+	if (!mtd->block_isbad) {
+		printk(KERN_ERR
+"NFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n"
+"Please use the new diskonchip driver under the NAND subsystem.\n");
+		return;
+	}
+
+	DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name);
+
+	nftl = kmalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
+
+	if (!nftl) {
+		printk(KERN_WARNING "NFTL: out of memory for data structures\n");
+		return;
+	}
+	memset(nftl, 0, sizeof(*nftl));
+
+	nftl->mbd.mtd = mtd;
+	nftl->mbd.devnum = -1;
+	nftl->mbd.blksize = 512;
+	nftl->mbd.tr = tr;
+	memcpy(&nftl->oobinfo, &mtd->oobinfo, sizeof(struct nand_oobinfo));
+	nftl->oobinfo.useecc = MTD_NANDECC_PLACEONLY;
+
+        if (NFTL_mount(nftl) < 0) {
+		printk(KERN_WARNING "NFTL: could not mount device\n");
+		kfree(nftl);
+		return;
+        }
+
+	/* OK, it's a new one. Set up all the data structures. */
+
+	/* Calculate geometry */
+	nftl->cylinders = 1024;
+	nftl->heads = 16;
+
+	temp = nftl->cylinders * nftl->heads;
+	nftl->sectors = nftl->mbd.size / temp;
+	if (nftl->mbd.size % temp) {
+		nftl->sectors++;
+		temp = nftl->cylinders * nftl->sectors;
+		nftl->heads = nftl->mbd.size / temp;
+
+		if (nftl->mbd.size % temp) {
+			nftl->heads++;
+			temp = nftl->heads * nftl->sectors;
+			nftl->cylinders = nftl->mbd.size / temp;
+		}
+	}
+
+	if (nftl->mbd.size != nftl->heads * nftl->cylinders * nftl->sectors) {
+		/*
+		  Oh no we don't have 
+		   mbd.size == heads * cylinders * sectors
+		*/
+		printk(KERN_WARNING "NFTL: cannot calculate a geometry to "
+		       "match size of 0x%lx.\n", nftl->mbd.size);
+		printk(KERN_WARNING "NFTL: using C:%d H:%d S:%d "
+			"(== 0x%lx sects)\n",
+			nftl->cylinders, nftl->heads , nftl->sectors, 
+			(long)nftl->cylinders * (long)nftl->heads *
+			(long)nftl->sectors );
+	}
+
+	if (add_mtd_blktrans_dev(&nftl->mbd)) {
+		if (nftl->ReplUnitTable)
+			kfree(nftl->ReplUnitTable);
+		if (nftl->EUNtable)
+			kfree(nftl->EUNtable);
+		kfree(nftl);
+		return;
+	}
+#ifdef PSYCHO_DEBUG
+	printk(KERN_INFO "NFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a');
+#endif
+}
+
+static void nftl_remove_dev(struct mtd_blktrans_dev *dev)
+{
+	struct NFTLrecord *nftl = (void *)dev;
+
+	DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum);
+
+	del_mtd_blktrans_dev(dev);
+	if (nftl->ReplUnitTable)
+		kfree(nftl->ReplUnitTable);
+	if (nftl->EUNtable)
+		kfree(nftl->EUNtable);
+	kfree(nftl);
+}
+
+#ifdef CONFIG_NFTL_RW
+
+/* Actual NFTL access routines */
+/* NFTL_findfreeblock: Find a free Erase Unit on the NFTL partition. This function is used
+ *	when the give Virtual Unit Chain
+ */
+static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate )
+{
+	/* For a given Virtual Unit Chain: find or create a free block and
+	   add it to the chain */
+	/* We're passed the number of the last EUN in the chain, to save us from
+	   having to look it up again */
+	u16 pot = nftl->LastFreeEUN;
+	int silly = nftl->nb_blocks;
+
+	/* Normally, we force a fold to happen before we run out of free blocks completely */
+	if (!desperate && nftl->numfreeEUNs < 2) {
+		DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
+		return 0xffff;
+	}
+
+	/* Scan for a free block */
+	do {
+		if (nftl->ReplUnitTable[pot] == BLOCK_FREE) {
+			nftl->LastFreeEUN = pot;
+			nftl->numfreeEUNs--;
+			return pot;
+		}
+
+		/* This will probably point to the MediaHdr unit itself,
+		   right at the beginning of the partition. But that unit
+		   (and the backup unit too) should have the UCI set
+		   up so that it's not selected for overwriting */
+		if (++pot > nftl->lastEUN)
+			pot = le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN);
+
+		if (!silly--) {
+			printk("Argh! No free blocks found! LastFreeEUN = %d, "
+			       "FirstEUN = %d\n", nftl->LastFreeEUN, 
+			       le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN));
+			return 0xffff;
+		}
+	} while (pot != nftl->LastFreeEUN);
+
+	return 0xffff;
+}
+
+static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock )
+{
+	u16 BlockMap[MAX_SECTORS_PER_UNIT];
+	unsigned char BlockLastState[MAX_SECTORS_PER_UNIT];
+	unsigned char BlockFreeFound[MAX_SECTORS_PER_UNIT];
+	unsigned int thisEUN;
+	int block;
+	int silly;
+	unsigned int targetEUN;
+	struct nftl_oob oob;
+	int inplace = 1;
+        size_t retlen;
+
+	memset(BlockMap, 0xff, sizeof(BlockMap));
+	memset(BlockFreeFound, 0, sizeof(BlockFreeFound));
+
+	thisEUN = nftl->EUNtable[thisVUC];
+
+	if (thisEUN == BLOCK_NIL) {
+		printk(KERN_WARNING "Trying to fold non-existent "
+		       "Virtual Unit Chain %d!\n", thisVUC);
+		return BLOCK_NIL;
+	}
+	
+	/* Scan to find the Erase Unit which holds the actual data for each
+	   512-byte block within the Chain.
+	*/
+        silly = MAX_LOOPS;
+	targetEUN = BLOCK_NIL;
+	while (thisEUN <= nftl->lastEUN ) {
+                unsigned int status, foldmark;
+
+		targetEUN = thisEUN;
+		for (block = 0; block < nftl->EraseSize / 512; block ++) {
+			MTD_READOOB(nftl->mbd.mtd,
+				    (thisEUN * nftl->EraseSize) + (block * 512),
+				    16 , &retlen, (char *)&oob);
+			if (block == 2) {
+                                foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
+                                if (foldmark == FOLD_MARK_IN_PROGRESS) {
+                                        DEBUG(MTD_DEBUG_LEVEL1, 
+                                              "Write Inhibited on EUN %d\n", thisEUN);
+					inplace = 0;
+				} else {
+					/* There's no other reason not to do inplace,
+					   except ones that come later. So we don't need
+					   to preserve inplace */
+					inplace = 1;
+				}
+			}
+                        status = oob.b.Status | oob.b.Status1;
+			BlockLastState[block] = status;
+
+			switch(status) {
+			case SECTOR_FREE:
+				BlockFreeFound[block] = 1;
+				break;
+
+			case SECTOR_USED:
+				if (!BlockFreeFound[block])
+					BlockMap[block] = thisEUN;
+				else
+					printk(KERN_WARNING 
+					       "SECTOR_USED found after SECTOR_FREE "
+					       "in Virtual Unit Chain %d for block %d\n",
+					       thisVUC, block);
+				break;
+			case SECTOR_DELETED:
+				if (!BlockFreeFound[block])
+					BlockMap[block] = BLOCK_NIL;
+				else
+					printk(KERN_WARNING 
+					       "SECTOR_DELETED found after SECTOR_FREE "
+					       "in Virtual Unit Chain %d for block %d\n",
+					       thisVUC, block);
+				break;
+
+			case SECTOR_IGNORE:
+				break;
+			default:
+				printk("Unknown status for block %d in EUN %d: %x\n",
+				       block, thisEUN, status);
+			}
+		}
+
+		if (!silly--) {
+			printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n",
+			       thisVUC);
+			return BLOCK_NIL;
+		}
+		
+		thisEUN = nftl->ReplUnitTable[thisEUN];
+	}
+
+	if (inplace) {
+		/* We're being asked to be a fold-in-place. Check
+		   that all blocks which actually have data associated
+		   with them (i.e. BlockMap[block] != BLOCK_NIL) are 
+		   either already present or SECTOR_FREE in the target
+		   block. If not, we're going to have to fold out-of-place
+		   anyway.
+		*/
+		for (block = 0; block < nftl->EraseSize / 512 ; block++) {
+			if (BlockLastState[block] != SECTOR_FREE &&
+			    BlockMap[block] != BLOCK_NIL &&
+			    BlockMap[block] != targetEUN) {
+				DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, "
+				      "block %d was %x lastEUN, "
+				      "and is in EUN %d (%s) %d\n",
+				      thisVUC, block, BlockLastState[block],
+				      BlockMap[block], 
+				      BlockMap[block]== targetEUN ? "==" : "!=",
+				      targetEUN);
+				inplace = 0;
+				break;
+			}
+		}
+
+		if (pendingblock >= (thisVUC * (nftl->EraseSize / 512)) &&
+		    pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) &&
+		    BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] !=
+		    SECTOR_FREE) {
+			DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. "
+			      "Folding out of place.\n", targetEUN);
+			inplace = 0;
+		}
+	}
+	
+	if (!inplace) {
+		DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. "
+		      "Trying out-of-place\n", thisVUC);
+		/* We need to find a targetEUN to fold into. */
+		targetEUN = NFTL_findfreeblock(nftl, 1);
+		if (targetEUN == BLOCK_NIL) {
+			/* Ouch. Now we're screwed. We need to do a 
+			   fold-in-place of another chain to make room
+			   for this one. We need a better way of selecting
+			   which chain to fold, because makefreeblock will 
+			   only ask us to fold the same one again.
+			*/
+			printk(KERN_WARNING
+			       "NFTL_findfreeblock(desperate) returns 0xffff.\n");
+			return BLOCK_NIL;
+		}
+	} else {
+            /* We put a fold mark in the chain we are folding only if
+               we fold in place to help the mount check code. If we do
+               not fold in place, it is possible to find the valid
+               chain by selecting the longer one */
+            oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS);
+            oob.u.c.unused = 0xffffffff;
+            MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8, 
+                         8, &retlen, (char *)&oob.u);
+        }
+
+	/* OK. We now know the location of every block in the Virtual Unit Chain,
+	   and the Erase Unit into which we are supposed to be copying.
+	   Go for it.
+	*/
+	DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN);
+	for (block = 0; block < nftl->EraseSize / 512 ; block++) {
+		unsigned char movebuf[512];
+		int ret;
+
+		/* If it's in the target EUN already, or if it's pending write, do nothing */
+		if (BlockMap[block] == targetEUN ||
+		    (pendingblock == (thisVUC * (nftl->EraseSize / 512) + block))) {
+			continue;
+		}
+
+                /* copy only in non free block (free blocks can only
+                   happen in case of media errors or deleted blocks) */
+                if (BlockMap[block] == BLOCK_NIL)
+                        continue;
+                
+                ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
+				  512, &retlen, movebuf); 
+                if (ret < 0) {
+                    ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block])
+                                      + (block * 512), 512, &retlen,
+                                      movebuf); 
+                    if (ret != -EIO) 
+                        printk("Error went away on retry.\n");
+                }
+		memset(&oob, 0xff, sizeof(struct nftl_oob));
+		oob.b.Status = oob.b.Status1 = SECTOR_USED;
+                MTD_WRITEECC(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + (block * 512),
+                             512, &retlen, movebuf, (char *)&oob, &nftl->oobinfo);
+	}
+        
+        /* add the header so that it is now a valid chain */
+        oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum
+                = cpu_to_le16(thisVUC);
+        oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff;
+        
+        MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 8, 
+                     8, &retlen, (char *)&oob.u);
+
+	/* OK. We've moved the whole lot into the new block. Now we have to free the original blocks. */
+
+	/* At this point, we have two different chains for this Virtual Unit, and no way to tell 
+	   them apart. If we crash now, we get confused. However, both contain the same data, so we
+	   shouldn't actually lose data in this case. It's just that when we load up on a medium which
+	   has duplicate chains, we need to free one of the chains because it's not necessary any more.
+	*/
+	thisEUN = nftl->EUNtable[thisVUC];
+	DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n");
+
+	/* For each block in the old chain (except the targetEUN of course), 
+	   free it and make it available for future use */
+	while (thisEUN <= nftl->lastEUN && thisEUN != targetEUN) {
+		unsigned int EUNtmp;
+
+                EUNtmp = nftl->ReplUnitTable[thisEUN];
+
+                if (NFTL_formatblock(nftl, thisEUN) < 0) {
+			/* could not erase : mark block as reserved
+			 */
+			nftl->ReplUnitTable[thisEUN] = BLOCK_RESERVED;
+                } else {
+			/* correctly erased : mark it as free */
+			nftl->ReplUnitTable[thisEUN] = BLOCK_FREE;
+			nftl->numfreeEUNs++;
+                }
+                thisEUN = EUNtmp;
+	}
+	
+	/* Make this the new start of chain for thisVUC */
+	nftl->ReplUnitTable[targetEUN] = BLOCK_NIL;
+	nftl->EUNtable[thisVUC] = targetEUN;
+
+	return targetEUN;
+}
+
+static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock)
+{
+	/* This is the part that needs some cleverness applied. 
+	   For now, I'm doing the minimum applicable to actually
+	   get the thing to work.
+	   Wear-levelling and other clever stuff needs to be implemented
+	   and we also need to do some assessment of the results when
+	   the system loses power half-way through the routine.
+	*/
+	u16 LongestChain = 0;
+	u16 ChainLength = 0, thislen;
+	u16 chain, EUN;
+
+	for (chain = 0; chain < le32_to_cpu(nftl->MediaHdr.FormattedSize) / nftl->EraseSize; chain++) {
+		EUN = nftl->EUNtable[chain];
+		thislen = 0;
+
+		while (EUN <= nftl->lastEUN) {
+			thislen++;
+			//printk("VUC %d reaches len %d with EUN %d\n", chain, thislen, EUN);
+			EUN = nftl->ReplUnitTable[EUN] & 0x7fff;
+			if (thislen > 0xff00) {
+				printk("Endless loop in Virtual Chain %d: Unit %x\n",
+				       chain, EUN);
+			}
+			if (thislen > 0xff10) {
+				/* Actually, don't return failure. Just ignore this chain and
+				   get on with it. */
+				thislen = 0;
+				break;
+			}
+		}
+
+		if (thislen > ChainLength) {
+			//printk("New longest chain is %d with length %d\n", chain, thislen);
+			ChainLength = thislen;
+			LongestChain = chain;
+		}
+	}
+
+	if (ChainLength < 2) {
+		printk(KERN_WARNING "No Virtual Unit Chains available for folding. "
+		       "Failing request\n");
+		return 0xffff;
+	}
+
+	return NFTL_foldchain (nftl, LongestChain, pendingblock);
+}
+
+/* NFTL_findwriteunit: Return the unit number into which we can write 
+                       for this block. Make it available if it isn't already
+*/
+static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
+{
+	u16 lastEUN;
+	u16 thisVUC = block / (nftl->EraseSize / 512);
+	unsigned int writeEUN;
+	unsigned long blockofs = (block * 512) & (nftl->EraseSize -1);
+	size_t retlen;
+	int silly, silly2 = 3;
+	struct nftl_oob oob;
+
+	do {
+		/* Scan the media to find a unit in the VUC which has
+		   a free space for the block in question.
+		*/
+
+		/* This condition catches the 0x[7f]fff cases, as well as 
+		   being a sanity check for past-end-of-media access
+		*/
+		lastEUN = BLOCK_NIL;
+		writeEUN = nftl->EUNtable[thisVUC];
+                silly = MAX_LOOPS;
+		while (writeEUN <= nftl->lastEUN) {
+			struct nftl_bci bci;
+			size_t retlen;
+                        unsigned int status;
+
+			lastEUN = writeEUN;
+
+			MTD_READOOB(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs,
+				    8, &retlen, (char *)&bci);
+			
+			DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n",
+			      block , writeEUN, le16_to_cpu(bci.Status));
+
+                        status = bci.Status | bci.Status1;
+			switch(status) {
+			case SECTOR_FREE:
+				return writeEUN;
+
+			case SECTOR_DELETED:
+			case SECTOR_USED:
+			case SECTOR_IGNORE:
+				break;
+			default:
+				// Invalid block. Don't use it any more. Must implement.
+				break;			
+			}
+			
+			if (!silly--) { 
+				printk(KERN_WARNING
+				       "Infinite loop in Virtual Unit Chain 0x%x\n",
+				       thisVUC);
+				return 0xffff;
+			}
+
+			/* Skip to next block in chain */
+			writeEUN = nftl->ReplUnitTable[writeEUN];
+		}
+
+		/* OK. We didn't find one in the existing chain, or there 
+		   is no existing chain. */
+
+		/* Try to find an already-free block */
+		writeEUN = NFTL_findfreeblock(nftl, 0);
+
+		if (writeEUN == BLOCK_NIL) {
+			/* That didn't work - there were no free blocks just
+			   waiting to be picked up. We're going to have to fold
+			   a chain to make room.
+			*/
+
+			/* First remember the start of this chain */
+			//u16 startEUN = nftl->EUNtable[thisVUC];
+			
+			//printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC);
+			writeEUN = NFTL_makefreeblock(nftl, 0xffff);
+
+			if (writeEUN == BLOCK_NIL) {
+				/* OK, we accept that the above comment is 
+				   lying - there may have been free blocks
+				   last time we called NFTL_findfreeblock(),
+				   but they are reserved for when we're
+				   desperate. Well, now we're desperate.
+				*/
+				DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
+				writeEUN = NFTL_findfreeblock(nftl, 1);
+			}
+			if (writeEUN == BLOCK_NIL) {
+				/* Ouch. This should never happen - we should
+				   always be able to make some room somehow. 
+				   If we get here, we've allocated more storage 
+				   space than actual media, or our makefreeblock
+				   routine is missing something.
+				*/
+				printk(KERN_WARNING "Cannot make free space.\n");
+				return BLOCK_NIL;
+			}			
+			//printk("Restarting scan\n");
+			lastEUN = BLOCK_NIL;
+			continue;
+		}
+
+		/* We've found a free block. Insert it into the chain. */
+		
+		if (lastEUN != BLOCK_NIL) {
+                    thisVUC |= 0x8000; /* It's a replacement block */
+		} else {
+                    /* The first block in a new chain */
+                    nftl->EUNtable[thisVUC] = writeEUN;
+		}
+
+		/* set up the actual EUN we're writing into */
+		/* Both in our cache... */
+		nftl->ReplUnitTable[writeEUN] = BLOCK_NIL;
+
+		/* ... and on the flash itself */
+		MTD_READOOB(nftl->mbd.mtd, writeEUN * nftl->EraseSize + 8, 8,
+			    &retlen, (char *)&oob.u);
+
+		oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC);
+
+		MTD_WRITEOOB(nftl->mbd.mtd, writeEUN * nftl->EraseSize + 8, 8,
+                             &retlen, (char *)&oob.u);
+
+                /* we link the new block to the chain only after the
+                   block is ready. It avoids the case where the chain
+                   could point to a free block */
+                if (lastEUN != BLOCK_NIL) {
+			/* Both in our cache... */
+			nftl->ReplUnitTable[lastEUN] = writeEUN;
+			/* ... and on the flash itself */
+			MTD_READOOB(nftl->mbd.mtd, (lastEUN * nftl->EraseSize) + 8,
+				    8, &retlen, (char *)&oob.u);
+
+			oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum
+				= cpu_to_le16(writeEUN);
+
+			MTD_WRITEOOB(nftl->mbd.mtd, (lastEUN * nftl->EraseSize) + 8,
+				     8, &retlen, (char *)&oob.u);
+		}
+
+		return writeEUN;
+
+	} while (silly2--);
+
+	printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n",
+	       thisVUC);
+	return 0xffff;
+}
+
+static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
+			   char *buffer)
+{
+	struct NFTLrecord *nftl = (void *)mbd;
+	u16 writeEUN;
+	unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1);
+	size_t retlen;
+	struct nftl_oob oob;
+
+	writeEUN = NFTL_findwriteunit(nftl, block);
+
+	if (writeEUN == BLOCK_NIL) {
+		printk(KERN_WARNING
+		       "NFTL_writeblock(): Cannot find block to write to\n");
+		/* If we _still_ haven't got a block to use, we're screwed */
+		return 1;
+	}
+
+	memset(&oob, 0xff, sizeof(struct nftl_oob));
+	oob.b.Status = oob.b.Status1 = SECTOR_USED;
+	MTD_WRITEECC(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs,
+		     512, &retlen, (char *)buffer, (char *)&oob, &nftl->oobinfo);
+        /* need to write SECTOR_USED flags since they are not written in mtd_writeecc */
+
+	return 0;
+}
+#endif /* CONFIG_NFTL_RW */
+
+static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
+			  char *buffer)
+{
+	struct NFTLrecord *nftl = (void *)mbd;
+	u16 lastgoodEUN;
+	u16 thisEUN = nftl->EUNtable[block / (nftl->EraseSize / 512)];
+	unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1);
+        unsigned int status;
+	int silly = MAX_LOOPS;
+        size_t retlen;
+        struct nftl_bci bci;
+
+	lastgoodEUN = BLOCK_NIL;
+
+        if (thisEUN != BLOCK_NIL) {
+		while (thisEUN < nftl->nb_blocks) {
+			if (MTD_READOOB(nftl->mbd.mtd, (thisEUN * nftl->EraseSize) + blockofs,
+					8, &retlen, (char *)&bci) < 0)
+				status = SECTOR_IGNORE;
+			else
+				status = bci.Status | bci.Status1;
+
+			switch (status) {
+			case SECTOR_FREE:
+				/* no modification of a sector should follow a free sector */
+				goto the_end;
+			case SECTOR_DELETED:
+				lastgoodEUN = BLOCK_NIL;
+				break;
+			case SECTOR_USED:
+				lastgoodEUN = thisEUN;
+				break;
+			case SECTOR_IGNORE:
+				break;
+			default:
+				printk("Unknown status for block %ld in EUN %d: %x\n",
+				       block, thisEUN, status);
+				break;
+			}
+
+			if (!silly--) {
+				printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%lx\n",
+				       block / (nftl->EraseSize / 512));
+				return 1;
+			}
+			thisEUN = nftl->ReplUnitTable[thisEUN];
+		}
+        }
+
+ the_end:
+	if (lastgoodEUN == BLOCK_NIL) {
+		/* the requested block is not on the media, return all 0x00 */
+		memset(buffer, 0, 512);
+	} else {
+		loff_t ptr = (lastgoodEUN * nftl->EraseSize) + blockofs;
+		size_t retlen;
+		if (MTD_READ(nftl->mbd.mtd, ptr, 512, &retlen, buffer))
+			return -EIO;
+	}
+	return 0;
+}
+
+static int nftl_getgeo(struct mtd_blktrans_dev *dev,  struct hd_geometry *geo)
+{
+	struct NFTLrecord *nftl = (void *)dev;
+
+	geo->heads = nftl->heads;
+	geo->sectors = nftl->sectors;
+	geo->cylinders = nftl->cylinders;
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * Module stuff
+ *
+ ****************************************************************************/
+
+
+static struct mtd_blktrans_ops nftl_tr = {
+	.name		= "nftl",
+	.major		= NFTL_MAJOR,
+	.part_bits	= NFTL_PARTN_BITS,
+	.getgeo		= nftl_getgeo,
+	.readsect	= nftl_readblock,
+#ifdef CONFIG_NFTL_RW
+	.writesect	= nftl_writeblock,
+#endif
+	.add_mtd	= nftl_add_mtd,
+	.remove_dev	= nftl_remove_dev,
+	.owner		= THIS_MODULE,
+};
+
+extern char nftlmountrev[];
+
+static int __init init_nftl(void)
+{
+	printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.97 $, nftlmount.c %s\n", nftlmountrev);
+
+	return register_mtd_blktrans(&nftl_tr);
+}
+
+static void __exit cleanup_nftl(void)
+{
+	deregister_mtd_blktrans(&nftl_tr);
+}
+
+module_init(init_nftl);
+module_exit(cleanup_nftl);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>, Fabrice Bellard <fabrice.bellard@netgem.com> et al.");
+MODULE_DESCRIPTION("Support code for NAND Flash Translation Layer, used on M-Systems DiskOnChip 2000 and Millennium");
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
new file mode 100644
index 000000000000..84afd9029f53
--- /dev/null
+++ b/drivers/mtd/nftlmount.c
@@ -0,0 +1,770 @@
+/* 
+ * NFTL mount code with extensive checks
+ *
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com) 
+ * Copyright (C) 2000 Netgem S.A.
+ *
+ * $Id: nftlmount.c,v 1.40 2004/11/22 14:38:29 kalev Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <asm/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nftl.h>
+
+#define SECTORSIZE 512
+
+char nftlmountrev[]="$Revision: 1.40 $";
+
+/* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
+ *	various device information of the NFTL partition and Bad Unit Table. Update
+ *	the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
+ *	is used for management of Erase Unit in other routines in nftl.c and nftlmount.c
+ */
+static int find_boot_record(struct NFTLrecord *nftl)
+{
+	struct nftl_uci1 h1;
+	unsigned int block, boot_record_count = 0;
+	size_t retlen;
+	u8 buf[SECTORSIZE];
+	struct NFTLMediaHeader *mh = &nftl->MediaHdr;
+	unsigned int i;
+
+        /* Assume logical EraseSize == physical erasesize for starting the scan. 
+	   We'll sort it out later if we find a MediaHeader which says otherwise */
+	/* Actually, we won't.  The new DiskOnChip driver has already scanned
+	   the MediaHeader and adjusted the virtual erasesize it presents in
+	   the mtd device accordingly.  We could even get rid of
+	   nftl->EraseSize if there were any point in doing so. */
+	nftl->EraseSize = nftl->mbd.mtd->erasesize;
+        nftl->nb_blocks = nftl->mbd.mtd->size / nftl->EraseSize;
+
+	nftl->MediaUnit = BLOCK_NIL;
+	nftl->SpareMediaUnit = BLOCK_NIL;
+
+	/* search for a valid boot record */
+	for (block = 0; block < nftl->nb_blocks; block++) {
+		int ret;
+
+		/* Check for ANAND header first. Then can whinge if it's found but later
+		   checks fail */
+		ret = MTD_READ(nftl->mbd.mtd, block * nftl->EraseSize, SECTORSIZE, &retlen, buf);
+		/* We ignore ret in case the ECC of the MediaHeader is invalid
+		   (which is apparently acceptable) */
+		if (retlen != SECTORSIZE) {
+			static int warncount = 5;
+
+			if (warncount) {
+				printk(KERN_WARNING "Block read at 0x%x of mtd%d failed: %d\n",
+				       block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
+				if (!--warncount)
+					printk(KERN_WARNING "Further failures for this block will not be printed\n");
+			}
+			continue;
+		}
+
+		if (retlen < 6 || memcmp(buf, "ANAND", 6)) {
+			/* ANAND\0 not found. Continue */
+#if 0
+			printk(KERN_DEBUG "ANAND header not found at 0x%x in mtd%d\n", 
+			       block * nftl->EraseSize, nftl->mbd.mtd->index);
+#endif			
+			continue;
+		}
+
+		/* To be safer with BIOS, also use erase mark as discriminant */
+		if ((ret = MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8,
+				8, &retlen, (char *)&h1) < 0)) {
+			printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n",
+			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
+			continue;
+		}
+
+#if 0 /* Some people seem to have devices without ECC or erase marks
+	 on the Media Header blocks. There are enough other sanity
+	 checks in here that we can probably do without it.
+      */
+		if (le16_to_cpu(h1.EraseMark | h1.EraseMark1) != ERASE_MARK) {
+			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but erase mark not present (0x%04x,0x%04x instead)\n",
+			       block * nftl->EraseSize, nftl->mbd.mtd->index, 
+			       le16_to_cpu(h1.EraseMark), le16_to_cpu(h1.EraseMark1));
+			continue;
+		}
+
+		/* Finally reread to check ECC */
+		if ((ret = MTD_READECC(nftl->mbd.mtd, block * nftl->EraseSize, SECTORSIZE,
+				&retlen, buf, (char *)&oob, NULL) < 0)) {
+			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n",
+			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
+			continue;
+		}
+
+		/* Paranoia. Check the ANAND header is still there after the ECC read */
+		if (memcmp(buf, "ANAND", 6)) {
+			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but went away on reread!\n",
+			       block * nftl->EraseSize, nftl->mbd.mtd->index);
+			printk(KERN_NOTICE "New data are: %02x %02x %02x %02x %02x %02x\n",
+			       buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+			continue;
+		}
+#endif
+		/* OK, we like it. */
+
+		if (boot_record_count) {
+			/* We've already processed one. So we just check if
+			   this one is the same as the first one we found */
+			if (memcmp(mh, buf, sizeof(struct NFTLMediaHeader))) {
+				printk(KERN_NOTICE "NFTL Media Headers at 0x%x and 0x%x disagree.\n",
+				       nftl->MediaUnit * nftl->EraseSize, block * nftl->EraseSize);
+				/* if (debug) Print both side by side */
+				if (boot_record_count < 2) {
+					/* We haven't yet seen two real ones */
+					return -1;
+				}
+				continue;
+			}
+			if (boot_record_count == 1)
+				nftl->SpareMediaUnit = block;
+
+			/* Mark this boot record (NFTL MediaHeader) block as reserved */
+			nftl->ReplUnitTable[block] = BLOCK_RESERVED;
+
+
+			boot_record_count++;
+			continue;
+		}
+
+		/* This is the first we've seen. Copy the media header structure into place */
+		memcpy(mh, buf, sizeof(struct NFTLMediaHeader));
+
+		/* Do some sanity checks on it */
+#if 0
+The new DiskOnChip driver scans the MediaHeader itself, and presents a virtual
+erasesize based on UnitSizeFactor.  So the erasesize we read from the mtd
+device is already correct.
+		if (mh->UnitSizeFactor == 0) {
+			printk(KERN_NOTICE "NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think we know what it means...\n");
+		} else if (mh->UnitSizeFactor < 0xfc) {
+			printk(KERN_NOTICE "Sorry, we don't support UnitSizeFactor 0x%02x\n",
+			       mh->UnitSizeFactor);
+			return -1;
+		} else if (mh->UnitSizeFactor != 0xff) {
+			printk(KERN_NOTICE "WARNING: Support for NFTL with UnitSizeFactor 0x%02x is experimental\n",
+			       mh->UnitSizeFactor);
+			nftl->EraseSize = nftl->mbd.mtd->erasesize << (0xff - mh->UnitSizeFactor);
+			nftl->nb_blocks = nftl->mbd.mtd->size / nftl->EraseSize;
+		}
+#endif
+		nftl->nb_boot_blocks = le16_to_cpu(mh->FirstPhysicalEUN);
+		if ((nftl->nb_boot_blocks + 2) >= nftl->nb_blocks) {
+			printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n");
+			printk(KERN_NOTICE "nb_boot_blocks (%d) + 2 > nb_blocks (%d)\n", 
+			       nftl->nb_boot_blocks, nftl->nb_blocks);
+			return -1;
+		}
+
+		nftl->numvunits = le32_to_cpu(mh->FormattedSize) / nftl->EraseSize;
+		if (nftl->numvunits > (nftl->nb_blocks - nftl->nb_boot_blocks - 2)) {
+			printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n");
+			printk(KERN_NOTICE "numvunits (%d) > nb_blocks (%d) - nb_boot_blocks(%d) - 2\n",
+			       nftl->numvunits, nftl->nb_blocks, nftl->nb_boot_blocks);
+			return -1;
+		}
+		
+		nftl->mbd.size  = nftl->numvunits * (nftl->EraseSize / SECTORSIZE);
+
+		/* If we're not using the last sectors in the device for some reason,
+		   reduce nb_blocks accordingly so we forget they're there */
+		nftl->nb_blocks = le16_to_cpu(mh->NumEraseUnits) + le16_to_cpu(mh->FirstPhysicalEUN);
+
+		/* XXX: will be suppressed */
+		nftl->lastEUN = nftl->nb_blocks - 1;
+
+		/* memory alloc */
+		nftl->EUNtable = kmalloc(nftl->nb_blocks * sizeof(u16), GFP_KERNEL);
+		if (!nftl->EUNtable) {
+			printk(KERN_NOTICE "NFTL: allocation of EUNtable failed\n");
+			return -ENOMEM;
+		}
+
+		nftl->ReplUnitTable = kmalloc(nftl->nb_blocks * sizeof(u16), GFP_KERNEL);
+		if (!nftl->ReplUnitTable) {
+			kfree(nftl->EUNtable);
+			printk(KERN_NOTICE "NFTL: allocation of ReplUnitTable failed\n");
+			return -ENOMEM;
+		}
+		
+		/* mark the bios blocks (blocks before NFTL MediaHeader) as reserved */
+		for (i = 0; i < nftl->nb_boot_blocks; i++)
+			nftl->ReplUnitTable[i] = BLOCK_RESERVED;
+		/* mark all remaining blocks as potentially containing data */
+		for (; i < nftl->nb_blocks; i++) { 
+			nftl->ReplUnitTable[i] = BLOCK_NOTEXPLORED;
+		}
+
+		/* Mark this boot record (NFTL MediaHeader) block as reserved */
+		nftl->ReplUnitTable[block] = BLOCK_RESERVED;
+
+		/* read the Bad Erase Unit Table and modify ReplUnitTable[] accordingly */
+		for (i = 0; i < nftl->nb_blocks; i++) {
+#if 0
+The new DiskOnChip driver already scanned the bad block table.  Just query it.
+			if ((i & (SECTORSIZE - 1)) == 0) {
+				/* read one sector for every SECTORSIZE of blocks */
+				if ((ret = MTD_READECC(nftl->mbd.mtd, block * nftl->EraseSize +
+						       i + SECTORSIZE, SECTORSIZE, &retlen, buf,
+						       (char *)&oob, NULL)) < 0) {
+					printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n",
+					       ret);
+					kfree(nftl->ReplUnitTable);
+					kfree(nftl->EUNtable);
+					return -1;
+				}
+			}
+			/* mark the Bad Erase Unit as RESERVED in ReplUnitTable */
+			if (buf[i & (SECTORSIZE - 1)] != 0xff)
+				nftl->ReplUnitTable[i] = BLOCK_RESERVED;
+#endif
+			if (nftl->mbd.mtd->block_isbad(nftl->mbd.mtd, i * nftl->EraseSize))
+				nftl->ReplUnitTable[i] = BLOCK_RESERVED;
+		}
+		
+		nftl->MediaUnit = block;
+		boot_record_count++;
+		
+	} /* foreach (block) */
+		
+	return boot_record_count?0:-1;
+}
+
+static int memcmpb(void *a, int c, int n)
+{
+	int i;
+	for (i = 0; i < n; i++) {
+		if (c != ((unsigned char *)a)[i])
+			return 1;
+	}
+	return 0;
+}
+
+/* check_free_sector: check if a free sector is actually FREE, i.e. All 0xff in data and oob area */
+static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len, 
+			      int check_oob)
+{
+	int i;
+	size_t retlen;
+	u8 buf[SECTORSIZE + nftl->mbd.mtd->oobsize];
+
+	for (i = 0; i < len; i += SECTORSIZE) {
+		if (MTD_READECC(nftl->mbd.mtd, address, SECTORSIZE, &retlen, buf, &buf[SECTORSIZE], &nftl->oobinfo) < 0)
+			return -1;
+		if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
+			return -1;
+
+		if (check_oob) {
+			if (memcmpb(buf + SECTORSIZE, 0xff, nftl->mbd.mtd->oobsize) != 0)
+				return -1;
+		}
+		address += SECTORSIZE;
+	}
+
+	return 0;
+}
+
+/* NFTL_format: format a Erase Unit by erasing ALL Erase Zones in the Erase Unit and
+ *              Update NFTL metadata. Each erase operation is checked with check_free_sectors
+ *
+ * Return: 0 when succeed, -1 on error.
+ *
+ *  ToDo: 1. Is it neceressary to check_free_sector after erasing ?? 
+ */
+int NFTL_formatblock(struct NFTLrecord *nftl, int block)
+{
+	size_t retlen;
+	unsigned int nb_erases, erase_mark;
+	struct nftl_uci1 uci;
+	struct erase_info *instr = &nftl->instr;
+
+	/* Read the Unit Control Information #1 for Wear-Leveling */
+	if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8,
+			8, &retlen, (char *)&uci) < 0)
+		goto default_uci1;
+
+	erase_mark = le16_to_cpu ((uci.EraseMark | uci.EraseMark1));
+	if (erase_mark != ERASE_MARK) {
+	default_uci1:
+		uci.EraseMark = cpu_to_le16(ERASE_MARK);
+		uci.EraseMark1 = cpu_to_le16(ERASE_MARK);
+		uci.WearInfo = cpu_to_le32(0);
+	}
+
+	memset(instr, 0, sizeof(struct erase_info));
+
+	/* XXX: use async erase interface, XXX: test return code */
+	instr->mtd = nftl->mbd.mtd;
+	instr->addr = block * nftl->EraseSize;
+	instr->len = nftl->EraseSize;
+	MTD_ERASE(nftl->mbd.mtd, instr);
+
+	if (instr->state == MTD_ERASE_FAILED) {
+		printk("Error while formatting block %d\n", block);
+		goto fail;
+	}
+
+		/* increase and write Wear-Leveling info */
+		nb_erases = le32_to_cpu(uci.WearInfo);
+		nb_erases++;
+
+		/* wrap (almost impossible with current flashs) or free block */
+		if (nb_erases == 0)
+			nb_erases = 1;
+
+		/* check the "freeness" of Erase Unit before updating metadata
+		 * FixMe:  is this check really necessary ? since we have check the
+		 *         return code after the erase operation. */
+		if (check_free_sectors(nftl, instr->addr, nftl->EraseSize, 1) != 0)
+			goto fail;
+
+		uci.WearInfo = le32_to_cpu(nb_erases);
+		if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8,
+				 &retlen, (char *)&uci) < 0)
+			goto fail;
+		return 0;
+fail:
+	/* could not format, update the bad block table (caller is responsible
+	   for setting the ReplUnitTable to BLOCK_RESERVED on failure) */
+	nftl->mbd.mtd->block_markbad(nftl->mbd.mtd, instr->addr);
+	return -1;
+}
+
+/* check_sectors_in_chain: Check that each sector of a Virtual Unit Chain is correct.
+ *	Mark as 'IGNORE' each incorrect sector. This check is only done if the chain
+ *	was being folded when NFTL was interrupted.
+ *
+ *	The check_free_sectors in this function is neceressary. There is a possible
+ *	situation that after writing the Data area, the Block Control Information is
+ *	not updated according (due to power failure or something) which leaves the block
+ *	in an umconsistent state. So we have to check if a block is really FREE in this
+ *	case. */
+static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block)
+{
+	unsigned int block, i, status;
+	struct nftl_bci bci;
+	int sectors_per_block;
+	size_t retlen;
+
+	sectors_per_block = nftl->EraseSize / SECTORSIZE;
+	block = first_block;
+	for (;;) {
+		for (i = 0; i < sectors_per_block; i++) {
+			if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + i * SECTORSIZE,
+					8, &retlen, (char *)&bci) < 0)
+				status = SECTOR_IGNORE;
+			else
+				status = bci.Status | bci.Status1;
+
+			switch(status) {
+			case SECTOR_FREE:
+				/* verify that the sector is really free. If not, mark
+				   as ignore */
+				if (memcmpb(&bci, 0xff, 8) != 0 ||
+				    check_free_sectors(nftl, block * nftl->EraseSize + i * SECTORSIZE, 
+						       SECTORSIZE, 0) != 0) {
+					printk("Incorrect free sector %d in block %d: "
+					       "marking it as ignored\n",
+					       i, block);
+
+					/* sector not free actually : mark it as SECTOR_IGNORE  */
+					bci.Status = SECTOR_IGNORE;
+					bci.Status1 = SECTOR_IGNORE;
+					MTD_WRITEOOB(nftl->mbd.mtd,
+						     block * nftl->EraseSize + i * SECTORSIZE,
+						     8, &retlen, (char *)&bci);
+				}
+				break;
+			default:
+				break;
+			}
+		}
+
+		/* proceed to next Erase Unit on the chain */
+		block = nftl->ReplUnitTable[block];
+		if (!(block == BLOCK_NIL || block < nftl->nb_blocks))
+			printk("incorrect ReplUnitTable[] : %d\n", block);
+		if (block == BLOCK_NIL || block >= nftl->nb_blocks)
+			break;
+	}
+}
+
+/* calc_chain_lenght: Walk through a Virtual Unit Chain and estimate chain length */
+static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block)
+{
+	unsigned int length = 0, block = first_block;
+
+	for (;;) {
+		length++;
+		/* avoid infinite loops, although this is guaranted not to
+		   happen because of the previous checks */
+		if (length >= nftl->nb_blocks) {
+			printk("nftl: length too long %d !\n", length);
+			break;
+		}
+
+		block = nftl->ReplUnitTable[block];
+		if (!(block == BLOCK_NIL || block < nftl->nb_blocks))
+			printk("incorrect ReplUnitTable[] : %d\n", block);
+		if (block == BLOCK_NIL || block >= nftl->nb_blocks)
+			break;
+	}
+	return length;
+}
+
+/* format_chain: Format an invalid Virtual Unit chain. It frees all the Erase Units in a
+ *	Virtual Unit Chain, i.e. all the units are disconnected.
+ *
+ *	It is not stricly correct to begin from the first block of the chain because
+ *	if we stop the code, we may see again a valid chain if there was a first_block
+ *	flag in a block inside it. But is it really a problem ?
+ *
+ * FixMe: Figure out what the last statesment means. What if power failure when we are
+ *	in the for (;;) loop formatting blocks ??
+ */
+static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
+{
+	unsigned int block = first_block, block1;
+
+	printk("Formatting chain at block %d\n", first_block);
+
+	for (;;) {
+		block1 = nftl->ReplUnitTable[block];
+
+		printk("Formatting block %d\n", block);
+		if (NFTL_formatblock(nftl, block) < 0) {
+			/* cannot format !!!! Mark it as Bad Unit */
+			nftl->ReplUnitTable[block] = BLOCK_RESERVED;
+		} else {
+			nftl->ReplUnitTable[block] = BLOCK_FREE;
+		}
+
+		/* goto next block on the chain */
+		block = block1;
+
+		if (!(block == BLOCK_NIL || block < nftl->nb_blocks))
+			printk("incorrect ReplUnitTable[] : %d\n", block);
+		if (block == BLOCK_NIL || block >= nftl->nb_blocks)
+			break;
+	}
+}
+
+/* check_and_mark_free_block: Verify that a block is free in the NFTL sense (valid erase mark) or
+ *	totally free (only 0xff).
+ *
+ * Definition: Free Erase Unit -- A properly erased/formatted Free Erase Unit should have meet the
+ *	following critia:
+ *	1. */
+static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
+{
+	struct nftl_uci1 h1;
+	unsigned int erase_mark;
+	size_t retlen;
+
+	/* check erase mark. */
+	if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, 
+			&retlen, (char *)&h1) < 0)
+		return -1;
+
+	erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
+	if (erase_mark != ERASE_MARK) {
+		/* if no erase mark, the block must be totally free. This is
+		   possible in two cases : empty filsystem or interrupted erase (very unlikely) */
+		if (check_free_sectors (nftl, block * nftl->EraseSize, nftl->EraseSize, 1) != 0)
+			return -1;
+
+		/* free block : write erase mark */
+		h1.EraseMark = cpu_to_le16(ERASE_MARK);
+		h1.EraseMark1 = cpu_to_le16(ERASE_MARK);
+		h1.WearInfo = cpu_to_le32(0);
+		if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, 
+				 &retlen, (char *)&h1) < 0)
+			return -1;
+	} else {
+#if 0
+		/* if erase mark present, need to skip it when doing check */
+		for (i = 0; i < nftl->EraseSize; i += SECTORSIZE) {
+			/* check free sector */
+			if (check_free_sectors (nftl, block * nftl->EraseSize + i,
+						SECTORSIZE, 0) != 0)
+				return -1;
+
+			if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + i,
+					16, &retlen, buf) < 0)
+				return -1;
+			if (i == SECTORSIZE) {
+				/* skip erase mark */
+				if (memcmpb(buf, 0xff, 8))
+					return -1;
+			} else {
+				if (memcmpb(buf, 0xff, 16))
+					return -1;
+			}
+		}
+#endif
+	}
+
+	return 0;
+}
+
+/* get_fold_mark: Read fold mark from Unit Control Information #2, we use FOLD_MARK_IN_PROGRESS
+ *	to indicate that we are in the progression of a Virtual Unit Chain folding. If the UCI #2
+ *	is FOLD_MARK_IN_PROGRESS when mounting the NFTL, the (previous) folding process is interrupted
+ *	for some reason. A clean up/check of the VUC is neceressary in this case.
+ *
+ * WARNING: return 0 if read error
+ */
+static int get_fold_mark(struct NFTLrecord *nftl, unsigned int block)
+{
+	struct nftl_uci2 uci;
+	size_t retlen;
+
+	if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + 2 * SECTORSIZE + 8,
+			8, &retlen, (char *)&uci) < 0)
+		return 0;
+
+	return le16_to_cpu((uci.FoldMark | uci.FoldMark1));
+}
+
+int NFTL_mount(struct NFTLrecord *s)
+{
+	int i;
+	unsigned int first_logical_block, logical_block, rep_block, nb_erases, erase_mark;
+	unsigned int block, first_block, is_first_block;
+	int chain_length, do_format_chain;
+	struct nftl_uci0 h0;
+	struct nftl_uci1 h1;
+	size_t retlen;
+
+	/* search for NFTL MediaHeader and Spare NFTL Media Header */
+	if (find_boot_record(s) < 0) {
+		printk("Could not find valid boot record\n");
+		return -1;
+	}
+
+	/* init the logical to physical table */
+	for (i = 0; i < s->nb_blocks; i++) {
+		s->EUNtable[i] = BLOCK_NIL;
+	}
+
+	/* first pass : explore each block chain */
+	first_logical_block = 0;
+	for (first_block = 0; first_block < s->nb_blocks; first_block++) {
+		/* if the block was not already explored, we can look at it */
+		if (s->ReplUnitTable[first_block] == BLOCK_NOTEXPLORED) {
+			block = first_block;
+			chain_length = 0;
+			do_format_chain = 0;
+
+			for (;;) {
+				/* read the block header. If error, we format the chain */
+				if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8, 8, 
+						&retlen, (char *)&h0) < 0 ||
+				    MTD_READOOB(s->mbd.mtd, block * s->EraseSize + SECTORSIZE + 8, 8, 
+						&retlen, (char *)&h1) < 0) {
+					s->ReplUnitTable[block] = BLOCK_NIL;
+					do_format_chain = 1;
+					break;
+				}
+
+				logical_block = le16_to_cpu ((h0.VirtUnitNum | h0.SpareVirtUnitNum));
+				rep_block = le16_to_cpu ((h0.ReplUnitNum | h0.SpareReplUnitNum));
+				nb_erases = le32_to_cpu (h1.WearInfo);
+				erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
+
+				is_first_block = !(logical_block >> 15);
+				logical_block = logical_block & 0x7fff;
+
+				/* invalid/free block test */
+				if (erase_mark != ERASE_MARK || logical_block >= s->nb_blocks) {
+					if (chain_length == 0) {
+						/* if not currently in a chain, we can handle it safely */
+						if (check_and_mark_free_block(s, block) < 0) {
+							/* not really free: format it */
+							printk("Formatting block %d\n", block);
+							if (NFTL_formatblock(s, block) < 0) {
+								/* could not format: reserve the block */
+								s->ReplUnitTable[block] = BLOCK_RESERVED;
+							} else {
+								s->ReplUnitTable[block] = BLOCK_FREE;
+							}
+						} else {
+							/* free block: mark it */
+							s->ReplUnitTable[block] = BLOCK_FREE;
+						}
+						/* directly examine the next block. */
+						goto examine_ReplUnitTable;
+					} else {
+						/* the block was in a chain : this is bad. We
+						   must format all the chain */
+						printk("Block %d: free but referenced in chain %d\n",
+						       block, first_block);
+						s->ReplUnitTable[block] = BLOCK_NIL;
+						do_format_chain = 1;
+						break;
+					}
+				}
+
+				/* we accept only first blocks here */
+				if (chain_length == 0) {
+					/* this block is not the first block in chain :
+					   ignore it, it will be included in a chain
+					   later, or marked as not explored */
+					if (!is_first_block)
+						goto examine_ReplUnitTable;
+					first_logical_block = logical_block;
+				} else {
+					if (logical_block != first_logical_block) {
+						printk("Block %d: incorrect logical block: %d expected: %d\n", 
+						       block, logical_block, first_logical_block);
+						/* the chain is incorrect : we must format it,
+						   but we need to read it completly */
+						do_format_chain = 1;
+					}
+					if (is_first_block) {
+						/* we accept that a block is marked as first
+						   block while being last block in a chain
+						   only if the chain is being folded */
+						if (get_fold_mark(s, block) != FOLD_MARK_IN_PROGRESS ||
+						    rep_block != 0xffff) {
+							printk("Block %d: incorrectly marked as first block in chain\n",
+							       block);
+							/* the chain is incorrect : we must format it,
+							   but we need to read it completly */
+							do_format_chain = 1;
+						} else {
+							printk("Block %d: folding in progress - ignoring first block flag\n",
+							       block);
+						}
+					}
+				}
+				chain_length++;
+				if (rep_block == 0xffff) {
+					/* no more blocks after */
+					s->ReplUnitTable[block] = BLOCK_NIL;
+					break;
+				} else if (rep_block >= s->nb_blocks) {
+					printk("Block %d: referencing invalid block %d\n", 
+					       block, rep_block);
+					do_format_chain = 1;
+					s->ReplUnitTable[block] = BLOCK_NIL;
+					break;
+				} else if (s->ReplUnitTable[rep_block] != BLOCK_NOTEXPLORED) {
+					/* same problem as previous 'is_first_block' test:
+					   we accept that the last block of a chain has
+					   the first_block flag set if folding is in
+					   progress. We handle here the case where the
+					   last block appeared first */
+					if (s->ReplUnitTable[rep_block] == BLOCK_NIL &&
+					    s->EUNtable[first_logical_block] == rep_block &&
+					    get_fold_mark(s, first_block) == FOLD_MARK_IN_PROGRESS) {
+						/* EUNtable[] will be set after */
+						printk("Block %d: folding in progress - ignoring first block flag\n",
+						       rep_block);
+						s->ReplUnitTable[block] = rep_block;
+						s->EUNtable[first_logical_block] = BLOCK_NIL;
+					} else {
+						printk("Block %d: referencing block %d already in another chain\n", 
+						       block, rep_block);
+						/* XXX: should handle correctly fold in progress chains */
+						do_format_chain = 1;
+						s->ReplUnitTable[block] = BLOCK_NIL;
+					}
+					break;
+				} else {
+					/* this is OK */
+					s->ReplUnitTable[block] = rep_block;
+					block = rep_block;
+				}
+			}
+
+			/* the chain was completely explored. Now we can decide
+			   what to do with it */
+			if (do_format_chain) {
+				/* invalid chain : format it */
+				format_chain(s, first_block);
+			} else {
+				unsigned int first_block1, chain_to_format, chain_length1;
+				int fold_mark;
+				
+				/* valid chain : get foldmark */
+				fold_mark = get_fold_mark(s, first_block);
+				if (fold_mark == 0) {
+					/* cannot get foldmark : format the chain */
+					printk("Could read foldmark at block %d\n", first_block);
+					format_chain(s, first_block);
+				} else {
+					if (fold_mark == FOLD_MARK_IN_PROGRESS)
+						check_sectors_in_chain(s, first_block);
+
+					/* now handle the case where we find two chains at the
+					   same virtual address : we select the longer one,
+					   because the shorter one is the one which was being
+					   folded if the folding was not done in place */
+					first_block1 = s->EUNtable[first_logical_block];
+					if (first_block1 != BLOCK_NIL) {
+						/* XXX: what to do if same length ? */
+						chain_length1 = calc_chain_length(s, first_block1);
+						printk("Two chains at blocks %d (len=%d) and %d (len=%d)\n", 
+						       first_block1, chain_length1, first_block, chain_length);
+						
+						if (chain_length >= chain_length1) {
+							chain_to_format = first_block1;
+							s->EUNtable[first_logical_block] = first_block;
+						} else {
+							chain_to_format = first_block;
+						}
+						format_chain(s, chain_to_format);
+					} else {
+						s->EUNtable[first_logical_block] = first_block;
+					}
+				}
+			}
+		}
+	examine_ReplUnitTable:;
+	}
+
+	/* second pass to format unreferenced blocks  and init free block count */
+	s->numfreeEUNs = 0;
+	s->LastFreeEUN = le16_to_cpu(s->MediaHdr.FirstPhysicalEUN);
+
+	for (block = 0; block < s->nb_blocks; block++) {
+		if (s->ReplUnitTable[block] == BLOCK_NOTEXPLORED) {
+			printk("Unreferenced block %d, formatting it\n", block);
+			if (NFTL_formatblock(s, block) < 0)
+				s->ReplUnitTable[block] = BLOCK_RESERVED;
+			else
+				s->ReplUnitTable[block] = BLOCK_FREE;
+		}
+		if (s->ReplUnitTable[block] == BLOCK_FREE) {
+			s->numfreeEUNs++;
+			s->LastFreeEUN = block;
+		}
+	}
+
+	return 0;
+}
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
new file mode 100644
index 000000000000..13f9e992bef8
--- /dev/null
+++ b/drivers/mtd/redboot.c
@@ -0,0 +1,235 @@
+/*
+ * $Id: redboot.c,v 1.17 2004/11/22 11:33:56 ijc Exp $
+ *
+ * Parse RedBoot-style Flash Image System (FIS) tables and
+ * produce a Linux partition array to match.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct fis_image_desc {
+    unsigned char name[16];      // Null terminated name
+    unsigned long flash_base;    // Address within FLASH of image
+    unsigned long mem_base;      // Address in memory where it executes
+    unsigned long size;          // Length of image
+    unsigned long entry_point;   // Execution entry point
+    unsigned long data_length;   // Length of actual data
+    unsigned char _pad[256-(16+7*sizeof(unsigned long))];
+    unsigned long desc_cksum;    // Checksum over image descriptor
+    unsigned long file_cksum;    // Checksum over image data
+};
+
+struct fis_list {
+	struct fis_image_desc *img;
+	struct fis_list *next;
+};
+
+static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
+module_param(directory, int, 0);
+
+static inline int redboot_checksum(struct fis_image_desc *img)
+{
+	/* RedBoot doesn't actually write the desc_cksum field yet AFAICT */
+	return 1;
+}
+
+static int parse_redboot_partitions(struct mtd_info *master, 
+                             struct mtd_partition **pparts,
+                             unsigned long fis_origin)
+{
+	int nrparts = 0;
+	struct fis_image_desc *buf;
+	struct mtd_partition *parts;
+	struct fis_list *fl = NULL, *tmp_fl;
+	int ret, i;
+	size_t retlen;
+	char *names;
+	char *nullname;
+	int namelen = 0;
+	int nulllen = 0;
+	int numslots;
+	unsigned long offset;
+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+	static char nullstring[] = "unallocated";
+#endif
+
+	buf = vmalloc(master->erasesize);
+
+	if (!buf)
+		return -ENOMEM;
+
+	if ( directory < 0 )
+		offset = master->size + directory*master->erasesize;
+	else
+		offset = directory*master->erasesize;
+
+	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+	       master->name, offset);
+
+	ret = master->read(master, offset,
+			   master->erasesize, &retlen, (void *)buf);
+
+	if (ret)
+		goto out;
+
+	if (retlen != master->erasesize) {
+		ret = -EIO;
+		goto out;
+	}
+
+	numslots = (master->erasesize / sizeof(struct fis_image_desc));
+	for (i = 0; i < numslots; i++) {
+		if (buf[i].name[0] == 0xff) {
+			i = numslots;
+			break;
+		}
+		if (!memcmp(buf[i].name, "FIS directory", 14))
+			break;
+	}
+	if (i == numslots) {
+		/* Didn't find it */
+		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+		       master->name);
+		ret = 0;
+		goto out;
+	}
+
+	for (i = 0; i < numslots; i++) {
+		struct fis_list *new_fl, **prev;
+
+		if (buf[i].name[0] == 0xff)
+			break;
+		if (!redboot_checksum(&buf[i]))
+			break;
+
+		new_fl = kmalloc(sizeof(struct fis_list), GFP_KERNEL);
+		namelen += strlen(buf[i].name)+1;
+		if (!new_fl) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		new_fl->img = &buf[i];
+                if (fis_origin) {
+                        buf[i].flash_base -= fis_origin;
+                } else {
+                        buf[i].flash_base &= master->size-1;
+                }
+
+		/* I'm sure the JFFS2 code has done me permanent damage.
+		 * I now think the following is _normal_
+		 */
+		prev = &fl;
+		while(*prev && (*prev)->img->flash_base < new_fl->img->flash_base)
+			prev = &(*prev)->next;
+		new_fl->next = *prev;
+		*prev = new_fl;
+
+		nrparts++;
+	}
+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+	if (fl->img->flash_base) {
+		nrparts++;
+		nulllen = sizeof(nullstring);
+	}
+
+	for (tmp_fl = fl; tmp_fl->next; tmp_fl = tmp_fl->next) {
+		if (tmp_fl->img->flash_base + tmp_fl->img->size + master->erasesize <= tmp_fl->next->img->flash_base) {
+			nrparts++;
+			nulllen = sizeof(nullstring);
+		}
+	}
+#endif
+	parts = kmalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
+
+	if (!parts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(parts, 0, sizeof(*parts)*nrparts + nulllen + namelen);
+
+	nullname = (char *)&parts[nrparts];
+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+	if (nulllen > 0) {
+		strcpy(nullname, nullstring);
+	}
+#endif
+	names = nullname + nulllen;
+
+	i=0;
+
+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+	if (fl->img->flash_base) {
+	       parts[0].name = nullname;
+	       parts[0].size = fl->img->flash_base;
+	       parts[0].offset = 0;
+		i++;
+	}
+#endif
+	for ( ; i<nrparts; i++) {
+		parts[i].size = fl->img->size;
+		parts[i].offset = fl->img->flash_base;
+		parts[i].name = names;
+
+		strcpy(names, fl->img->name);
+#ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
+		if (!memcmp(names, "RedBoot", 8) ||
+				!memcmp(names, "RedBoot config", 15) ||
+				!memcmp(names, "FIS directory", 14)) {
+			parts[i].mask_flags = MTD_WRITEABLE;
+		}
+#endif
+		names += strlen(names)+1;
+
+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+			i++;
+			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+			parts[i].name = nullname;
+		}
+#endif
+		tmp_fl = fl;
+		fl = fl->next;
+		kfree(tmp_fl);
+	}
+	ret = nrparts;
+	*pparts = parts;
+ out:
+	while (fl) {
+		struct fis_list *old = fl;
+		fl = fl->next;
+		kfree(old);
+	}
+	vfree(buf);
+	return ret;
+}
+
+static struct mtd_part_parser redboot_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_redboot_partitions,
+	.name = "RedBoot",
+};
+
+static int __init redboot_parser_init(void)
+{
+	return register_mtd_parser(&redboot_parser);
+}
+
+static void __exit redboot_parser_exit(void)
+{
+	deregister_mtd_parser(&redboot_parser);
+}
+
+module_init(redboot_parser_init);
+module_exit(redboot_parser_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
+MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables");