Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...

1 files changed, 167 insertions, 0 deletions

diff --git a/drivers/mfd/lp3943.c b/drivers/mfd/lp3943.c
new file mode 100644
index 000000000000..e32226836fb4
--- /dev/null
+++ b/drivers/mfd/lp3943.c
@@ -0,0 +1,167 @@
+/*
+ * TI/National Semiconductor LP3943 MFD Core Driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver structure:
+ *   LP3943 is an integrated device capable of driving 16 output channels.
+ *   It can be used for a GPIO expander and PWM generators.
+ *
+ *                                   LED control    General usage for a device
+ *                                   ___________   ____________________________
+ *
+ *   LP3943 MFD ---- GPIO expander    leds-gpio        eg) HW enable pin
+ *               |
+ *               --- PWM generator    leds-pwm         eg) PWM input
+ *
+ *   Internal two PWM channels are used for LED dimming effect.
+ *   And each output pin can be used as a GPIO as well.
+ *   The LED functionality can work with GPIOs or PWMs.
+ *   LEDs can be controlled with legacy leds-gpio(static brightness) or
+ *   leds-pwm drivers(dynamic brightness control).
+ *   Alternatively, it can be used for generic GPIO and PWM controller.
+ *   For example, a GPIO is HW enable pin of a device.
+ *   A PWM is input pin of a backlight device.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#define LP3943_MAX_REGISTERS		0x09
+
+/* Register configuration for pin MUX */
+static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
+	/* address, mask, shift */
+	{ LP3943_REG_MUX0, 0x03, 0 },
+	{ LP3943_REG_MUX0, 0x0C, 2 },
+	{ LP3943_REG_MUX0, 0x30, 4 },
+	{ LP3943_REG_MUX0, 0xC0, 6 },
+	{ LP3943_REG_MUX1, 0x03, 0 },
+	{ LP3943_REG_MUX1, 0x0C, 2 },
+	{ LP3943_REG_MUX1, 0x30, 4 },
+	{ LP3943_REG_MUX1, 0xC0, 6 },
+	{ LP3943_REG_MUX2, 0x03, 0 },
+	{ LP3943_REG_MUX2, 0x0C, 2 },
+	{ LP3943_REG_MUX2, 0x30, 4 },
+	{ LP3943_REG_MUX2, 0xC0, 6 },
+	{ LP3943_REG_MUX3, 0x03, 0 },
+	{ LP3943_REG_MUX3, 0x0C, 2 },
+	{ LP3943_REG_MUX3, 0x30, 4 },
+	{ LP3943_REG_MUX3, 0xC0, 6 },
+};
+
+static struct mfd_cell lp3943_devs[] = {
+	{
+		.name = "lp3943-pwm",
+		.of_compatible = "ti,lp3943-pwm",
+	},
+	{
+		.name = "lp3943-gpio",
+		.of_compatible = "ti,lp3943-gpio",
+	},
+};
+
+int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(lp3943->regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	*read = (u8)val;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(lp3943_read_byte);
+
+int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data)
+{
+	return regmap_write(lp3943->regmap, reg, data);
+}
+EXPORT_SYMBOL_GPL(lp3943_write_byte);
+
+int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data)
+{
+	return regmap_update_bits(lp3943->regmap, reg, mask, data);
+}
+EXPORT_SYMBOL_GPL(lp3943_update_bits);
+
+static const struct regmap_config lp3943_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LP3943_MAX_REGISTERS,
+};
+
+static int lp3943_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+	struct lp3943 *lp3943;
+	struct device *dev = &cl->dev;
+
+	lp3943 = devm_kzalloc(dev, sizeof(*lp3943), GFP_KERNEL);
+	if (!lp3943)
+		return -ENOMEM;
+
+	lp3943->regmap = devm_regmap_init_i2c(cl, &lp3943_regmap_config);
+	if (IS_ERR(lp3943->regmap))
+		return PTR_ERR(lp3943->regmap);
+
+	lp3943->pdata = dev_get_platdata(dev);
+	lp3943->dev = dev;
+	lp3943->mux_cfg = lp3943_mux_cfg;
+	i2c_set_clientdata(cl, lp3943);
+
+	return mfd_add_devices(dev, -1, lp3943_devs, ARRAY_SIZE(lp3943_devs),
+			       NULL, 0, NULL);
+}
+
+static int lp3943_remove(struct i2c_client *cl)
+{
+	struct lp3943 *lp3943 = i2c_get_clientdata(cl);
+
+	mfd_remove_devices(lp3943->dev);
+	return 0;
+}
+
+static const struct i2c_device_id lp3943_ids[] = {
+	{ "lp3943", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp3943_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id lp3943_of_match[] = {
+	{ .compatible = "ti,lp3943", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_of_match);
+#endif
+
+static struct i2c_driver lp3943_driver = {
+	.probe = lp3943_probe,
+	.remove = lp3943_remove,
+	.driver = {
+		.name = "lp3943",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(lp3943_of_match),
+	},
+	.id_table = lp3943_ids,
+};
+
+module_i2c_driver(lp3943_driver);
+
+MODULE_DESCRIPTION("LP3943 MFD Core Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");