Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The first part of the media updates for Kernel 3.7.

  This series contain:

   - A major tree renaming patch series: now, drivers are organized
     internally by their used bus, instead of by V4L2 and/or DVB API,
     providing a cleaner driver location for hybrid drivers that
     implement both APIs, and allowing to cleanup the Kconfig items and
     make them more intuitive for the end user;

   - Media Kernel developers are typically very lazy with their duties
     of keeping the MAINTAINERS entries for their drivers updated.  As
     now the tree is more organized, we're doing an effort to add/update
     those entries for the drivers that aren't currently orphan;

   - Several DVB USB drivers got moved to a new DVB USB v2 core; the new
     core fixes several bugs (as the existing one that got bitroted).
     Now, suspend/resume finally started to work fine (at least with
     some devices - we should expect more work with regards to it);

   - added multistream support for DVB-T2, and unified the API for
     DVB-S2 and ISDB-S.  Backward binary support is preserved;

   - as usual, a few new drivers, some V4L2 core improvements and lots
     of drivers improvements and fixes.

  There are some points to notice on this series:

   1) you should expect a trivial merge conflict on your tree, with the
      removal of Documentation/feature-removal-schedule.txt: this series
      would be adding two additional entries there.  I opted to not
      rebase it due to this recent change;

   2) With regards to the PCTV 520e udev-related breakage, I opted to
      fix it in a way that the patches can be backported to 3.5 even
      without your firmware fix patch.  This way, Greg doesn't need to
      rush backporting your patch (as there are still the firmware cache
      and firmware path customization issues to be addressed there).

      I'll send later a patch (likely after the end of the merge window)
      reverting the rest of the DRX-K async firmware request, fully
      restoring its original behaviour to allow media drivers to
      initialize everything serialized as before for 3.7 and upper.

   3) I'm planning to work on this weekend to test the DMABUF patches
      for V4L2.  The patches are on my queue for several Kernel cycles,
      but, up to now, there is/was no way to test the series locally.

      I have some concerns about this particular changeset with regards
      to security issues, and with regards to the replacement of the old
      VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to
      GPU drivers change.  The Overlay API allows direct PCI2PCI
      transfers from a media capture card into the GPU framebuffer, but
      its API is crappy.  Also, the only existing X11 driver that
      implements it requires a XV extension that is not available
      anymore on modern drivers.  The DMABUF can do the same thing, but
      with it is promising to be a properly-designed API.  If I can
      successfully test this series and be happy with it, I should be
      asking you to pull them next week."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits)
  em28xx: regression fix: use DRX-K sync firmware requests on em28xx
  drxk: allow loading firmware synchrousnously
  em28xx: Make all em28xx extensions to be initialized asynchronously
  [media] tda18271: properly report read errors in tda18271_get_id
  [media] tda18271: delay IR & RF calibration until init() if delay_cal is set
  [media] MAINTAINERS: add Michael Krufky as tda827x maintainer
  [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer
  [media] MAINTAINERS: add Michael Krufky as cxusb maintainer
  [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer
  [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer
  [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer
  [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap
  [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend()
  [media] exynos-gsc: Add missing static storage class specifiers
  [media] exynos-gsc: Remove <linux/version.h> header file inclusion
  [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs()
  [media] s5p-tv: Fix potential NULL pointer dereference error
  [media] s5k6aa: Fix possible NULL pointer dereference
  ...

1 files changed, 339 insertions, 0 deletions

diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c
new file mode 100644
index 000000000000..448361c6a13e
--- /dev/null
+++ b/drivers/media/usb/au0828/au0828-cards.c
@@ -0,0 +1,339 @@
+/*
+ *  Driver for the Auvitek USB bridge
+ *
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "au0828.h"
+#include "au0828-cards.h"
+#include "au8522.h"
+#include "media/tuner.h"
+#include "media/v4l2-common.h"
+
+void hvr950q_cs5340_audio(void *priv, int enable)
+{
+	/* Because the HVR-950q shares an i2s bus between the cs5340 and the
+	   au8522, we need to hold cs5340 in reset when using the au8522 */
+	struct au0828_dev *dev = priv;
+	if (enable == 1)
+		au0828_set(dev, REG_000, 0x10);
+	else
+		au0828_clear(dev, REG_000, 0x10);
+}
+
+struct au0828_board au0828_boards[] = {
+	[AU0828_BOARD_UNKNOWN] = {
+		.name	= "Unknown board",
+		.tuner_type = UNSET,
+		.tuner_addr = ADDR_UNSET,
+	},
+	[AU0828_BOARD_HAUPPAUGE_HVR850] = {
+		.name	= "Hauppauge HVR850",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		.i2c_clk_divider = AU0828_I2C_CLK_20KHZ,
+		.input = {
+			{
+				.type = AU0828_VMUX_TELEVISION,
+				.vmux = AU8522_COMPOSITE_CH4_SIF,
+				.amux = AU8522_AUDIO_SIF,
+			},
+			{
+				.type = AU0828_VMUX_COMPOSITE,
+				.vmux = AU8522_COMPOSITE_CH1,
+				.amux = AU8522_AUDIO_NONE,
+				.audio_setup = hvr950q_cs5340_audio,
+			},
+			{
+				.type = AU0828_VMUX_SVIDEO,
+				.vmux = AU8522_SVIDEO_CH13,
+				.amux = AU8522_AUDIO_NONE,
+				.audio_setup = hvr950q_cs5340_audio,
+			},
+		},
+	},
+	[AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
+		.name	= "Hauppauge HVR950Q",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		/* The au0828 hardware i2c implementation does not properly
+		   support the xc5000's i2c clock stretching.  So we need to
+		   lower the clock frequency enough where the 15us clock
+		   stretch fits inside of a normal clock cycle, or else the
+		   au0828 fails to set the STOP bit.  A 30 KHz clock puts the
+		   clock pulse width at 18us */
+		.i2c_clk_divider = AU0828_I2C_CLK_20KHZ,
+		.input = {
+			{
+				.type = AU0828_VMUX_TELEVISION,
+				.vmux = AU8522_COMPOSITE_CH4_SIF,
+				.amux = AU8522_AUDIO_SIF,
+			},
+			{
+				.type = AU0828_VMUX_COMPOSITE,
+				.vmux = AU8522_COMPOSITE_CH1,
+				.amux = AU8522_AUDIO_NONE,
+				.audio_setup = hvr950q_cs5340_audio,
+			},
+			{
+				.type = AU0828_VMUX_SVIDEO,
+				.vmux = AU8522_SVIDEO_CH13,
+				.amux = AU8522_AUDIO_NONE,
+				.audio_setup = hvr950q_cs5340_audio,
+			},
+		},
+	},
+	[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
+		.name	= "Hauppauge HVR950Q rev xxF8",
+		.tuner_type = UNSET,
+		.tuner_addr = ADDR_UNSET,
+		.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
+	},
+	[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
+		.name	= "DViCO FusionHDTV USB",
+		.tuner_type = UNSET,
+		.tuner_addr = ADDR_UNSET,
+		.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
+	},
+	[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+		.name = "Hauppauge Woodbury",
+		.tuner_type = UNSET,
+		.tuner_addr = ADDR_UNSET,
+		.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
+	},
+};
+
+/* Tuner callback function for au0828 boards. Currently only needed
+ * for HVR1500Q, which has an xc5000 tuner.
+ */
+int au0828_tuner_callback(void *priv, int component, int command, int arg)
+{
+	struct au0828_dev *dev = priv;
+
+	dprintk(1, "%s()\n", __func__);
+
+	switch (dev->boardnr) {
+	case AU0828_BOARD_HAUPPAUGE_HVR850:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_DVICO_FUSIONHDTV7:
+		if (command == 0) {
+			/* Tuner Reset Command from xc5000 */
+			/* Drive the tuner into reset and out */
+			au0828_clear(dev, REG_001, 2);
+			mdelay(10);
+			au0828_set(dev, REG_001, 2);
+			mdelay(10);
+			return 0;
+		} else {
+			printk(KERN_ERR
+				"%s(): Unknown command.\n", __func__);
+			return -EINVAL;
+		}
+		break;
+	}
+
+	return 0; /* Should never be here */
+}
+
+static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data);
+	dev->board.tuner_type = tv.tuner_type;
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
+	case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
+	case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72261: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
+	case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
+		break;
+	default:
+		printk(KERN_WARNING "%s: warning: "
+		       "unknown hauppauge model #%d\n", __func__, tv.model);
+		break;
+	}
+
+	printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
+	       __func__, tv.model);
+}
+
+void au0828_card_setup(struct au0828_dev *dev)
+{
+	static u8 eeprom[256];
+	struct tuner_setup tun_setup;
+	struct v4l2_subdev *sd;
+	unsigned int mode_mask = T_ANALOG_TV;
+
+	dprintk(1, "%s()\n", __func__);
+
+	memcpy(&dev->board, &au0828_boards[dev->boardnr], sizeof(dev->board));
+
+	if (dev->i2c_rc == 0) {
+		dev->i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
+	}
+
+	switch (dev->boardnr) {
+	case AU0828_BOARD_HAUPPAUGE_HVR850:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+		if (dev->i2c_rc == 0)
+			hauppauge_eeprom(dev, eeprom+0xa0);
+		break;
+	}
+
+	if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
+		/* Load the analog demodulator driver (note this would need to
+		   be abstracted out if we ever need to support a different
+		   demod) */
+		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+				"au8522", 0x8e >> 1, NULL);
+		if (sd == NULL)
+			printk(KERN_ERR "analog subdev registration failed\n");
+	}
+
+	/* Setup tuners */
+	if (dev->board.tuner_type != TUNER_ABSENT) {
+		/* Load the tuner module, which does the attach */
+		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+				"tuner", dev->board.tuner_addr, NULL);
+		if (sd == NULL)
+			printk(KERN_ERR "tuner subdev registration fail\n");
+
+		tun_setup.mode_mask      = mode_mask;
+		tun_setup.type           = dev->board.tuner_type;
+		tun_setup.addr           = dev->board.tuner_addr;
+		tun_setup.tuner_callback = au0828_tuner_callback;
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr,
+				     &tun_setup);
+	}
+}
+
+/*
+ * The bridge has between 8 and 12 gpios.
+ * Regs 1 and 0 deal with output enables.
+ * Regs 3 and 2 deal with direction.
+ */
+void au0828_gpio_setup(struct au0828_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	switch (dev->boardnr) {
+	case AU0828_BOARD_HAUPPAUGE_HVR850:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+		/* GPIO's
+		 * 4 - CS5340
+		 * 5 - AU8522 Demodulator
+		 * 6 - eeprom W/P
+		 * 7 - power supply
+		 * 9 - XC5000 Tuner
+		 */
+
+		/* Into reset */
+		au0828_write(dev, REG_003, 0x02);
+		au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
+		au0828_write(dev, REG_001, 0x0);
+		au0828_write(dev, REG_000, 0x0);
+		msleep(100);
+
+		/* Out of reset (leave the cs5340 in reset until needed) */
+		au0828_write(dev, REG_003, 0x02);
+		au0828_write(dev, REG_001, 0x02);
+		au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
+		au0828_write(dev, REG_000, 0x80 | 0x40 | 0x20);
+
+		msleep(250);
+		break;
+	case AU0828_BOARD_DVICO_FUSIONHDTV7:
+		/* GPIO's
+		 * 6 - ?
+		 * 8 - AU8522 Demodulator
+		 * 9 - XC5000 Tuner
+		 */
+
+		/* Into reset */
+		au0828_write(dev, REG_003, 0x02);
+		au0828_write(dev, REG_002, 0xa0);
+		au0828_write(dev, REG_001, 0x0);
+		au0828_write(dev, REG_000, 0x0);
+		msleep(100);
+
+		/* Out of reset */
+		au0828_write(dev, REG_003, 0x02);
+		au0828_write(dev, REG_002, 0xa0);
+		au0828_write(dev, REG_001, 0x02);
+		au0828_write(dev, REG_000, 0xa0);
+		msleep(250);
+		break;
+	}
+}
+
+/* table of devices that work with this driver */
+struct usb_device_id au0828_usb_id_table[] = {
+	{ USB_DEVICE(0x2040, 0x7200),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7240),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
+	{ USB_DEVICE(0x0fe9, 0xd620),
+		.driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
+	{ USB_DEVICE(0x2040, 0x7210),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7217),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x721b),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x721e),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x721f),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7280),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x0fd9, 0x0008),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7201),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x7211),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x7281),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x05e1, 0x0480),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
+	{ USB_DEVICE(0x2040, 0x8200),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
+	{ USB_DEVICE(0x2040, 0x7260),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7213),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, au0828_usb_id_table);