[media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver

This patch adds support for the Exynos5250 SoC variant of the FIMC-LITE
IP. A 'compatible' string is added for Exynos5250 compatible devices
and the capture DMA handling is reworked to use the FLITE_REG_CIFCNTSEQ
register, masking output DMA buffer address slots. The frame interrupt
is enabled so there are now 2 interrupts per frame. This likely can be
optimized in future by using any status registers that allow to figure
out what the last and the currently written frame buffer is. It would
also be more reliable in cases where there are high interrupt service
latencies.

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 20 insertions, 2 deletions

diff --git a/drivers/media/platform/exynos4-is/fimc-lite.h b/drivers/media/platform/exynos4-is/fimc-lite.h
index 4b1068425dad..c98f3da74870 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.h
+++ b/drivers/media/platform/exynos4-is/fimc-lite.h
@@ -27,7 +27,7 @@
 
 #define FIMC_LITE_DRV_NAME	"exynos-fimc-lite"
 #define FLITE_CLK_NAME		"flite"
-#define FIMC_LITE_MAX_DEVS	2
+#define FIMC_LITE_MAX_DEVS	3
 #define FLITE_REQ_BUFS_MIN	2
 
 /* Bit index definitions for struct fimc_lite::state */
@@ -48,12 +48,26 @@ enum {
 #define FLITE_SD_PAD_SOURCE_ISP	2
 #define FLITE_SD_PADS_NUM	3
 
+/**
+ * struct flite_drvdata - FIMC-LITE IP variant data structure
+ * @max_width: maximum camera interface input width in pixels
+ * @max_height: maximum camera interface input height in pixels
+ * @out_width_align: minimum output width alignment in pixels
+ * @win_hor_offs_align: minimum camera interface crop window horizontal
+ * 			offset alignment in pixels
+ * @out_hor_offs_align: minimum output DMA compose rectangle horizontal
+ * 			offset alignment in pixels
+ * @max_dma_bufs: number of output DMA buffer start address registers
+ * @num_instances: total number of FIMC-LITE IP instances available
+ */
 struct flite_drvdata {
 	unsigned short max_width;
 	unsigned short max_height;
 	unsigned short out_width_align;
 	unsigned short win_hor_offs_align;
 	unsigned short out_hor_offs_align;
+	unsigned short max_dma_bufs;
+	unsigned short num_instances;
 };
 
 struct fimc_lite_events {
@@ -80,12 +94,14 @@ struct flite_frame {
  * struct flite_buffer - video buffer structure
  * @vb:    vb2 buffer
  * @list:  list head for the buffers queue
- * @paddr: precalculated physical address
+ * @paddr: DMA buffer start address
+ * @index: DMA start address register's index
  */
 struct flite_buffer {
 	struct vb2_buffer vb;
 	struct list_head list;
 	dma_addr_t paddr;
+	unsigned short index;
 };
 
 /**
@@ -119,6 +135,7 @@ struct flite_buffer {
  * @pending_buf_q: pending buffers queue head
  * @active_buf_q: the queue head of buffers scheduled in hardware
  * @vb_queue: vb2 buffers queue
+ * @buf_index: helps to keep track of the DMA start address register index
  * @active_buf_count: number of video buffers scheduled in hardware
  * @frame_count: the captured frames counter
  * @reqbufs_count: the number of buffers requested with REQBUFS ioctl
@@ -155,6 +172,7 @@ struct fimc_lite {
 	struct list_head	pending_buf_q;
 	struct list_head	active_buf_q;
 	struct vb2_queue	vb_queue;
+	unsigned short		buf_index;
 	unsigned int		frame_count;
 	unsigned int		reqbufs_count;