media: cec: move cec autorepeat handling to rc-core

CEC autorepeat is different than other protocols. Autorepeat is triggered
by the first repeated user control pressed CEC message, rather than a
fixed REP_DELAY.

This change also does away with the KEY_UP event directly after the first
KEY_DOWN event, which was used to stop autorepeat from starting.

See commit a9a249a2c997 ("media: cec: fix remote control passthrough")
for the original change.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 5 insertions, 51 deletions

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index 2a097e016414..2b1e540587d6 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -1788,9 +1788,6 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
 	int la_idx = cec_log_addr2idx(adap, dest_laddr);
 	bool from_unregistered = init_laddr == 0xf;
 	struct cec_msg tx_cec_msg = { };
-#ifdef CONFIG_MEDIA_CEC_RC
-	int scancode;
-#endif
 
 	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
 
@@ -1886,9 +1883,11 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
 		 */
 		case 0x60:
 			if (msg->len == 2)
-				scancode = msg->msg[2];
+				rc_keydown(adap->rc, RC_PROTO_CEC,
+					   msg->msg[2], 0);
 			else
-				scancode = msg->msg[2] << 8 | msg->msg[3];
+				rc_keydown(adap->rc, RC_PROTO_CEC,
+					   msg->msg[2] << 8 | msg->msg[3], 0);
 			break;
 		/*
 		 * Other function messages that are not handled.
@@ -1901,54 +1900,11 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
 		 */
 		case 0x56: case 0x57:
 		case 0x67: case 0x68: case 0x69: case 0x6a:
-			scancode = -1;
 			break;
 		default:
-			scancode = msg->msg[2];
-			break;
-		}
-
-		/* Was repeating, but keypress timed out */
-		if (adap->rc_repeating && !adap->rc->keypressed) {
-			adap->rc_repeating = false;
-			adap->rc_last_scancode = -1;
-		}
-		/* Different keypress from last time, ends repeat mode */
-		if (adap->rc_last_scancode != scancode) {
-			rc_keyup(adap->rc);
-			adap->rc_repeating = false;
-		}
-		/* We can't handle this scancode */
-		if (scancode < 0) {
-			adap->rc_last_scancode = scancode;
-			break;
-		}
-
-		/* Send key press */
-		rc_keydown(adap->rc, RC_PROTO_CEC, scancode, 0);
-
-		/* When in repeating mode, we're done */
-		if (adap->rc_repeating)
-			break;
-
-		/*
-		 * We are not repeating, but the new scancode is
-		 * the same as the last one, and this second key press is
-		 * within 550 ms (the 'Follower Safety Timeout') from the
-		 * previous key press, so we now enable the repeating mode.
-		 */
-		if (adap->rc_last_scancode == scancode &&
-		    msg->rx_ts - adap->rc_last_keypress < 550 * NSEC_PER_MSEC) {
-			adap->rc_repeating = true;
+			rc_keydown(adap->rc, RC_PROTO_CEC, msg->msg[2], 0);
 			break;
 		}
-		/*
-		 * Not in repeating mode, so avoid triggering repeat mode
-		 * by calling keyup.
-		 */
-		rc_keyup(adap->rc);
-		adap->rc_last_scancode = scancode;
-		adap->rc_last_keypress = msg->rx_ts;
 #endif
 		break;
 
@@ -1958,8 +1914,6 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
 			break;
 #ifdef CONFIG_MEDIA_CEC_RC
 		rc_keyup(adap->rc);
-		adap->rc_repeating = false;
-		adap->rc_last_scancode = -1;
 #endif
 		break;