Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 0 insertions, 230 deletions

diff --git a/drivers/isdn/sc/message.c b/drivers/isdn/sc/message.c
deleted file mode 100644
index 9679a1902b32..000000000000
--- a/drivers/isdn/sc/message.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* $Id: message.c,v 1.5.8.2 2001/09/23 22:24:59 kai Exp $
- *
- * functions for sending and receiving control messages
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-#include <linux/sched.h>
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-/*
- * receive a message from the board
- */
-int receivemessage(int card, RspMessage *rspmsg)
-{
-	DualPortMemory *dpm;
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	pr_debug("%s: Entered receivemessage\n",
-		 sc_adapter[card]->devicename);
-
-	/*
-	 * See if there are messages waiting
-	 */
-	if (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) {
-		/*
-		 * Map in the DPM to the base page and copy the message
-		 */
-		spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-		outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
-		     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-		dpm = (DualPortMemory *) sc_adapter[card]->rambase;
-		memcpy_fromio(rspmsg, &(dpm->rsp_queue[dpm->rsp_tail]),
-			      MSG_LEN);
-		dpm->rsp_tail = (dpm->rsp_tail + 1) % MAX_MESSAGES;
-		inb(sc_adapter[card]->ioport[FIFO_READ]);
-		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-		/*
-		 * Tell the board that the message is received
-		 */
-		pr_debug("%s: Received Message seq:%d pid:%d time:%d cmd:%d "
-			 "cnt:%d (type,class,code):(%d,%d,%d) "
-			 "link:%d stat:0x%x\n",
-			 sc_adapter[card]->devicename,
-			 rspmsg->sequence_no,
-			 rspmsg->process_id,
-			 rspmsg->time_stamp,
-			 rspmsg->cmd_sequence_no,
-			 rspmsg->msg_byte_cnt,
-			 rspmsg->type,
-			 rspmsg->class,
-			 rspmsg->code,
-			 rspmsg->phy_link_no,
-			 rspmsg->rsp_status);
-
-		return 0;
-	}
-	return -ENOMSG;
-}
-
-/*
- * send a message to the board
- */
-int sendmessage(int card,
-		unsigned int procid,
-		unsigned int type,
-		unsigned int class,
-		unsigned int code,
-		unsigned int link,
-		unsigned int data_len,
-		unsigned int *data)
-{
-	DualPortMemory *dpm;
-	ReqMessage sndmsg;
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	/*
-	 * Make sure we only send CEPID messages when the engine is up
-	 * and CMPID messages when it is down
-	 */
-	if (sc_adapter[card]->EngineUp && procid == CMPID) {
-		pr_debug("%s: Attempt to send CM message with engine up\n",
-			 sc_adapter[card]->devicename);
-		return -ESRCH;
-	}
-
-	if (!sc_adapter[card]->EngineUp && procid == CEPID) {
-		pr_debug("%s: Attempt to send CE message with engine down\n",
-			 sc_adapter[card]->devicename);
-		return -ESRCH;
-	}
-
-	memset(&sndmsg, 0, MSG_LEN);
-	sndmsg.msg_byte_cnt = 4;
-	sndmsg.type = type;
-	sndmsg.class = class;
-	sndmsg.code = code;
-	sndmsg.phy_link_no = link;
-
-	if (data_len > 0) {
-		if (data_len > MSG_DATA_LEN)
-			data_len = MSG_DATA_LEN;
-		memcpy(&(sndmsg.msg_data), data, data_len);
-		sndmsg.msg_byte_cnt = data_len + 8;
-	}
-
-	sndmsg.process_id = procid;
-	sndmsg.sequence_no = sc_adapter[card]->seq_no++ % 256;
-
-	/*
-	 * wait for an empty slot in the queue
-	 */
-	while (!(inb(sc_adapter[card]->ioport[FIFO_STATUS]) & WF_NOT_FULL))
-		udelay(1);
-
-	/*
-	 * Disable interrupts and map in shared memory
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	dpm = (DualPortMemory *) sc_adapter[card]->rambase;	/* Fix me */
-	memcpy_toio(&(dpm->req_queue[dpm->req_head]), &sndmsg, MSG_LEN);
-	dpm->req_head = (dpm->req_head + 1) % MAX_MESSAGES;
-	outb(sndmsg.sequence_no, sc_adapter[card]->ioport[FIFO_WRITE]);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
-	pr_debug("%s: Sent Message seq:%d pid:%d time:%d "
-		 "cnt:%d (type,class,code):(%d,%d,%d) "
-		 "link:%d\n ",
-		 sc_adapter[card]->devicename,
-		 sndmsg.sequence_no,
-		 sndmsg.process_id,
-		 sndmsg.time_stamp,
-		 sndmsg.msg_byte_cnt,
-		 sndmsg.type,
-		 sndmsg.class,
-		 sndmsg.code,
-		 sndmsg.phy_link_no);
-
-	return 0;
-}
-
-int send_and_receive(int card,
-		     unsigned int procid,
-		     unsigned char type,
-		     unsigned char class,
-		     unsigned char code,
-		     unsigned char link,
-		     unsigned char data_len,
-		     unsigned char *data,
-		     RspMessage *mesgdata,
-		     int timeout)
-{
-	int retval;
-	int tries;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	sc_adapter[card]->want_async_messages = 1;
-	retval = sendmessage(card, procid, type, class, code, link,
-			     data_len, (unsigned int *) data);
-
-	if (retval) {
-		pr_debug("%s: SendMessage failed in SAR\n",
-			 sc_adapter[card]->devicename);
-		sc_adapter[card]->want_async_messages = 0;
-		return -EIO;
-	}
-
-	tries = 0;
-	/* wait for the response */
-	while (tries < timeout) {
-		schedule_timeout_interruptible(1);
-
-		pr_debug("SAR waiting..\n");
-
-		/*
-		 * See if we got our message back
-		 */
-		if ((sc_adapter[card]->async_msg.type == type) &&
-		    (sc_adapter[card]->async_msg.class == class) &&
-		    (sc_adapter[card]->async_msg.code == code) &&
-		    (sc_adapter[card]->async_msg.phy_link_no == link)) {
-
-			/*
-			 * Got it!
-			 */
-			pr_debug("%s: Got ASYNC message\n",
-				 sc_adapter[card]->devicename);
-			memcpy(mesgdata, &(sc_adapter[card]->async_msg),
-			       sizeof(RspMessage));
-			sc_adapter[card]->want_async_messages = 0;
-			return 0;
-		}
-
-		tries++;
-	}
-
-	pr_debug("%s: SAR message timeout\n", sc_adapter[card]->devicename);
-	sc_adapter[card]->want_async_messages = 0;
-	return -ETIME;
-}