Merge rsync://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	include/linux/kernel.h

14 files changed, 619 insertions, 192 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d6d44946a283..884320e70403 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -163,7 +163,7 @@ config I2C_PXA_SLAVE
 	  I2C bus.
 
 config I2C_PIIX4
-	tristate "Intel PIIX4"
+	tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
 	depends on I2C && PCI
 	help
 	  If you say yes to this option, support will be included for the Intel
@@ -172,6 +172,9 @@ config I2C_PIIX4
 	  of Broadcom):
 	    Intel PIIX4
 	    Intel 440MX
+	    ATI IXP200
+	    ATI IXP300
+	    ATI IXP400
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
@@ -252,12 +255,12 @@ config I2C_POWERMAC
 	  will be called i2c-powermac.
 
 config I2C_MPC
-	tristate "MPC107/824x/85xx/52xx"
+	tristate "MPC107/824x/85xx/52xx/86xx"
 	depends on I2C && PPC32
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
-	  MPC85xx family processors. The driver may also work on 52xx
+	  MPC85xx/MPC8641 family processors. The driver may also work on 52xx
 	  family processors, though interrupts are known not to work.
 
 	  This driver can also be built as a module.  If so, the module
@@ -273,6 +276,17 @@ config I2C_NFORCE2
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-nforce2.
 
+config I2C_OCORES
+	tristate "OpenCores I2C Controller"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the
+	  OpenCores I2C controller. For details see
+	  http://www.opencores.org/projects.cgi/web/i2c/overview
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ocores.
+
 config I2C_PARPORT
 	tristate "Parallel port adapter"
 	depends on I2C && PARPORT
@@ -500,6 +514,7 @@ config I2C_PCA_ISA
 	tristate "PCA9564 on an ISA bus"
 	depends on I2C
 	select I2C_ALGOPCA
+	default n
 	help
 	  This driver supports ISA boards using the Philips PCA 9564
 	  Parallel bus to I2C bus controller
@@ -507,6 +522,11 @@ config I2C_PCA_ISA
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pca-isa.
 
+	  This device is almost undetectable and using this driver on a
+	  system which doesn't have this device will result in long
+	  delays when I2C/SMBus chip drivers are loaded (e.g. at boot
+	  time).  If unsure, say N.
+
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
 	depends on I2C && MV64X60 && EXPERIMENTAL
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index b44831dff683..ac56df53155b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
+obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index dfca74933625..7be1d0a3e8f8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1,5 +1,5 @@
 /*
-    i801.c - Part of lm_sensors, Linux kernel modules for hardware
+    i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
               monitoring
     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
@@ -36,7 +36,7 @@
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
-    See the doc/busses/i2c-i801 file for details.
+    See the file Documentation/i2c/busses/i2c-i801 for details.
     I2C Block Read and Process Call are not supported.
 */
 
@@ -66,9 +66,8 @@
 #define SMBAUXCTL	(13 + i801_smba)	/* ICH4 only */
 
 /* PCI Address Constants */
-#define SMBBA		0x020
+#define SMBBAR		4
 #define SMBHSTCFG	0x040
-#define SMBREV		0x008
 
 /* Host configuration bits for SMBHSTCFG */
 #define SMBHSTCFG_HST_EN	1
@@ -92,92 +91,16 @@
 #define I801_START		0x40
 #define I801_PEC_EN		0x80	/* ICH4 only */
 
-/* insmod parameters */
-
-/* If force_addr is set to anything different from 0, we forcibly enable
-   the I801 at the given address. VERY DANGEROUS! */
-static u16 force_addr;
-module_param(force_addr, ushort, 0);
-MODULE_PARM_DESC(force_addr,
-		 "Forcibly enable the I801 at the given address. "
-		 "EXTREMELY DANGEROUS!");
 
 static int i801_transaction(void);
 static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 				  int command, int hwpec);
 
-static unsigned short i801_smba;
+static unsigned long i801_smba;
 static struct pci_driver i801_driver;
 static struct pci_dev *I801_dev;
 static int isich4;
 
-static int i801_setup(struct pci_dev *dev)
-{
-	int error_return = 0;
-	unsigned char temp;
-
-	/* Note: we keep on searching until we have found 'function 3' */
-	if(PCI_FUNC(dev->devfn) != 3)
-		return -ENODEV;
-
-	I801_dev = dev;
-	if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
-	    (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
-	    (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
-		isich4 = 1;
-	else
-		isich4 = 0;
-
-	/* Determine the address of the SMBus areas */
-	if (force_addr) {
-		i801_smba = force_addr & 0xfff0;
-	} else {
-		pci_read_config_word(I801_dev, SMBBA, &i801_smba);
-		i801_smba &= 0xfff0;
-		if(i801_smba == 0) {
-			dev_err(&dev->dev, "SMB base address uninitialized "
-				"- upgrade BIOS or use force_addr=0xaddr\n");
-			return -ENODEV;
-		}
-	}
-
-	if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
-		dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
-			i801_smba);
-		error_return = -EBUSY;
-		goto END;
-	}
-
-	pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
-	temp &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
-	pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
-
-	/* If force_addr is set, we program the new address here. Just to make
-	   sure, we disable the device first. */
-	if (force_addr) {
-		pci_write_config_byte(I801_dev, SMBHSTCFG, temp & 0xfe);
-		pci_write_config_word(I801_dev, SMBBA, i801_smba);
-		pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 0x01);
-		dev_warn(&dev->dev, "WARNING: I801 SMBus interface set to "
-			"new address %04x!\n", i801_smba);
-	} else if ((temp & 1) == 0) {
-		pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 1);
-		dev_warn(&dev->dev, "enabling SMBus device\n");
-	}
-
-	if (temp & 0x02)
-		dev_dbg(&dev->dev, "I801 using Interrupt SMI# for SMBus.\n");
-	else
-		dev_dbg(&dev->dev, "I801 using PCI Interrupt for SMBus.\n");
-
-	pci_read_config_byte(I801_dev, SMBREV, &temp);
-	dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
-	dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba);
-
-END:
-	return error_return;
-}
-
 static int i801_transaction(void)
 {
 	int temp;
@@ -334,8 +257,8 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		/* We will always wait for a fraction of a second! */
 		timeout = 0;
 		do {
-			temp = inb_p(SMBHSTSTS);
 			msleep(1);
+			temp = inb_p(SMBHSTSTS);
 		}
 		    while ((!(temp & 0x80))
 			   && (timeout++ < MAX_TIMEOUT));
@@ -393,8 +316,8 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		/* wait for INTR bit as advised by Intel */
 		timeout = 0;
 		do {
-			temp = inb_p(SMBHSTSTS);
 			msleep(1);
+			temp = inb_p(SMBHSTSTS);
 		} while ((!(temp & 0x02))
 			   && (timeout++ < MAX_TIMEOUT));
 
@@ -541,25 +464,80 @@ MODULE_DEVICE_TABLE (pci, i801_ids);
 
 static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	unsigned char temp;
+	int err;
+
+	I801_dev = dev;
+	if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
+	    (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
+	    (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
+		isich4 = 1;
+	else
+		isich4 = 0;
 
-	if (i801_setup(dev)) {
-		dev_warn(&dev->dev,
-			"I801 not detected, module not inserted.\n");
-		return -ENODEV;
+	err = pci_enable_device(dev);
+	if (err) {
+		dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+			err);
+		goto exit;
 	}
 
+	/* Determine the address of the SMBus area */
+	i801_smba = pci_resource_start(dev, SMBBAR);
+	if (!i801_smba) {
+		dev_err(&dev->dev, "SMBus base address uninitialized, "
+			"upgrade BIOS\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	err = pci_request_region(dev, SMBBAR, i801_driver.name);
+	if (err) {
+		dev_err(&dev->dev, "Failed to request SMBus region "
+			"0x%lx-0x%Lx\n", i801_smba,
+			(unsigned long long)pci_resource_end(dev, SMBBAR));
+		goto exit;
+	}
+
+	pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
+	temp &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	if (!(temp & SMBHSTCFG_HST_EN)) {
+		dev_info(&dev->dev, "Enabling SMBus device\n");
+		temp |= SMBHSTCFG_HST_EN;
+	}
+	pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
+
+	if (temp & SMBHSTCFG_SMB_SMI_EN)
+		dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+	else
+		dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
+
 	/* set up the driverfs linkage to our parent device */
 	i801_adapter.dev.parent = &dev->dev;
 
 	snprintf(i801_adapter.name, I2C_NAME_SIZE,
-		"SMBus I801 adapter at %04x", i801_smba);
-	return i2c_add_adapter(&i801_adapter);
+		"SMBus I801 adapter at %04lx", i801_smba);
+	err = i2c_add_adapter(&i801_adapter);
+	if (err) {
+		dev_err(&dev->dev, "Failed to add SMBus adapter\n");
+		goto exit_release;
+	}
+	return 0;
+
+exit_release:
+	pci_release_region(dev, SMBBAR);
+exit:
+	return err;
 }
 
 static void __devexit i801_remove(struct pci_dev *dev)
 {
 	i2c_del_adapter(&i801_adapter);
-	release_region(i801_smba, (isich4 ? 16 : 8));
+	pci_release_region(dev, SMBBAR);
+	/*
+	 * do not call pci_disable_device(dev) since it can cause hard hangs on
+	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
+	 */
 }
 
 static struct pci_driver i801_driver = {
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 87fae937e666..0599bbd65d93 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -28,7 +28,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/ioport.h>
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index d00a02fc23e4..aca7e1668605 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -26,7 +26,6 @@
  * the Free Software Foundation, version 2.
  */
 
-#include <linux/config.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 2721e4c8184a..377ab40944b8 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -13,7 +13,6 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -319,7 +318,7 @@ static int fsl_i2c_probe(struct platform_device *pdev)
 
 	if (i2c->irq != 0)
 		if ((result = request_irq(i2c->irq, mpc_i2c_isr,
-					  SA_SHIRQ, "i2c-mpc", i2c)) < 0) {
+					  IRQF_SHARED, "i2c-mpc", i2c)) < 0) {
 			printk(KERN_ERR
 			       "i2c-mpc - failed to attach interrupt\n");
 			goto fail_irq;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 2d80eb26f688..604b49e22df1 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -31,6 +31,8 @@
     nForce3 250Gb MCP		00E4
     nForce4 MCP			0052
     nForce4 MCP-04		0034
+    nForce4 MCP51		0264
+    nForce4 MCP55		0368
 
     This driver supports the 2 SMBuses that are included in the MCP of the
     nForce2/3/4 chipsets.
@@ -64,6 +66,7 @@ struct nforce2_smbus {
 
 /*
  * nVidia nForce2 SMBus control register definitions
+ * (Newer incarnations use standard BARs 4 and 5 instead)
  */
 #define NFORCE_PCI_SMB1	0x50
 #define NFORCE_PCI_SMB2	0x54
@@ -259,6 +262,8 @@ static struct pci_device_id nforce2_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) },
 	{ 0 }
 };
 
@@ -266,19 +271,29 @@ static struct pci_device_id nforce2_ids[] = {
 MODULE_DEVICE_TABLE (pci, nforce2_ids);
 
 
-static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
-	struct nforce2_smbus *smbus, char *name)
+static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
+	int alt_reg, struct nforce2_smbus *smbus, const char *name)
 {
-	u16 iobase;
 	int error;
 
-	if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) {
-		dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name);
-		return -1;
+	smbus->base = pci_resource_start(dev, bar);
+	if (smbus->base) {
+		smbus->size = pci_resource_len(dev, bar);
+	} else {
+		/* Older incarnations of the device used non-standard BARs */
+		u16 iobase;
+
+		if (pci_read_config_word(dev, alt_reg, &iobase)
+		    != PCIBIOS_SUCCESSFUL) {
+			dev_err(&dev->dev, "Error reading PCI config for %s\n",
+				name);
+			return -1;
+		}
+
+		smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
+		smbus->size = 8;
 	}
-	smbus->dev  = dev;
-	smbus->base = iobase & 0xfffc;
-	smbus->size = 8;
+	smbus->dev = dev;
 
 	if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
 		dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
@@ -313,12 +328,13 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
 	pci_set_drvdata(dev, smbuses);
 
 	/* SMBus adapter 1 */
-	res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
+	res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
 	if (res1 < 0) {
 		dev_err(&dev->dev, "Error probing SMB1.\n");
 		smbuses[0].base = 0;	/* to have a check value */
 	}
-	res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
+	/* SMBus adapter 2 */
+	res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
 	if (res2 < 0) {
 		dev_err(&dev->dev, "Error probing SMB2.\n");
 		smbuses[1].base = 0;	/* to have a check value */
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
new file mode 100644
index 000000000000..592824087c49
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -0,0 +1,341 @@
+/*
+ * i2c-ocores.c: I2C bus driver for OpenCores I2C controller
+ * (http://www.opencores.org/projects.cgi/web/i2c/overview).
+ *
+ * Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/i2c-ocores.h>
+#include <asm/io.h>
+
+struct ocores_i2c {
+	void __iomem *base;
+	int regstep;
+	wait_queue_head_t wait;
+	struct i2c_adapter adap;
+	struct i2c_msg *msg;
+	int pos;
+	int nmsgs;
+	int state; /* see STATE_ */
+};
+
+/* registers */
+#define OCI2C_PRELOW		0
+#define OCI2C_PREHIGH		1
+#define OCI2C_CONTROL		2
+#define OCI2C_DATA		3
+#define OCI2C_CMD		4 /* write only */
+#define OCI2C_STATUS		4 /* read only, same address as OCI2C_CMD */
+
+#define OCI2C_CTRL_IEN		0x40
+#define OCI2C_CTRL_EN		0x80
+
+#define OCI2C_CMD_START		0x91
+#define OCI2C_CMD_STOP		0x41
+#define OCI2C_CMD_READ		0x21
+#define OCI2C_CMD_WRITE		0x11
+#define OCI2C_CMD_READ_ACK	0x21
+#define OCI2C_CMD_READ_NACK	0x29
+#define OCI2C_CMD_IACK		0x01
+
+#define OCI2C_STAT_IF		0x01
+#define OCI2C_STAT_TIP		0x02
+#define OCI2C_STAT_ARBLOST	0x20
+#define OCI2C_STAT_BUSY		0x40
+#define OCI2C_STAT_NACK		0x80
+
+#define STATE_DONE		0
+#define STATE_START		1
+#define STATE_WRITE		2
+#define STATE_READ		3
+#define STATE_ERROR		4
+
+static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite8(value, i2c->base + reg * i2c->regstep);
+}
+
+static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
+{
+	return ioread8(i2c->base + reg * i2c->regstep);
+}
+
+static void ocores_process(struct ocores_i2c *i2c)
+{
+	struct i2c_msg *msg = i2c->msg;
+	u8 stat = oc_getreg(i2c, OCI2C_STATUS);
+
+	if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) {
+		/* stop has been sent */
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
+		wake_up(&i2c->wait);
+		return;
+	}
+
+	/* error? */
+	if (stat & OCI2C_STAT_ARBLOST) {
+		i2c->state = STATE_ERROR;
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+		return;
+	}
+
+	if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) {
+		i2c->state =
+			(msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+		if (stat & OCI2C_STAT_NACK) {
+			i2c->state = STATE_ERROR;
+			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+			return;
+		}
+	} else
+		msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
+
+	/* end of msg? */
+	if (i2c->pos == msg->len) {
+		i2c->nmsgs--;
+		i2c->msg++;
+		i2c->pos = 0;
+		msg = i2c->msg;
+
+		if (i2c->nmsgs) {	/* end? */
+			/* send start? */
+			if (!(msg->flags & I2C_M_NOSTART)) {
+				u8 addr = (msg->addr << 1);
+
+				if (msg->flags & I2C_M_RD)
+					addr |= 1;
+
+				i2c->state = STATE_START;
+
+				oc_setreg(i2c, OCI2C_DATA, addr);
+				oc_setreg(i2c, OCI2C_CMD,  OCI2C_CMD_START);
+				return;
+			} else
+				i2c->state = (msg->flags & I2C_M_RD)
+					? STATE_READ : STATE_WRITE;
+		} else {
+			i2c->state = STATE_DONE;
+			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+			return;
+		}
+	}
+
+	if (i2c->state == STATE_READ) {
+		oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len-1) ?
+			  OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK);
+	} else {
+		oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]);
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE);
+	}
+}
+
+static irqreturn_t ocores_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct ocores_i2c *i2c = dev_id;
+
+	ocores_process(i2c);
+
+	return IRQ_HANDLED;
+}
+
+static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct ocores_i2c *i2c = i2c_get_adapdata(adap);
+
+	i2c->msg = msgs;
+	i2c->pos = 0;
+	i2c->nmsgs = num;
+	i2c->state = STATE_START;
+
+	oc_setreg(i2c, OCI2C_DATA,
+			(i2c->msg->addr << 1) |
+			((i2c->msg->flags & I2C_M_RD) ? 1:0));
+
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
+
+	if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+			       (i2c->state == STATE_DONE), HZ))
+		return (i2c->state == STATE_DONE) ? num : -EIO;
+	else
+		return -ETIMEDOUT;
+}
+
+static void ocores_init(struct ocores_i2c *i2c,
+			struct ocores_i2c_platform_data *pdata)
+{
+	int prescale;
+	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+
+	/* make sure the device is disabled */
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+	prescale = (pdata->clock_khz / (5*100)) - 1;
+	oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff);
+	oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);
+
+	/* Init the device */
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN);
+}
+
+
+static u32 ocores_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm ocores_algorithm = {
+	.master_xfer	= ocores_xfer,
+	.functionality	= ocores_func,
+};
+
+static struct i2c_adapter ocores_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "i2c-ocores",
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &ocores_algorithm,
+};
+
+
+static int __devinit ocores_i2c_probe(struct platform_device *pdev)
+{
+	struct ocores_i2c *i2c;
+	struct ocores_i2c_platform_data *pdata;
+	struct resource *res, *res2;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res2)
+		return -ENODEV;
+
+	pdata = (struct ocores_i2c_platform_data*) pdev->dev.platform_data;
+	if (!pdata)
+		return -ENODEV;
+
+	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	if (!request_mem_region(res->start, res->end - res->start + 1,
+				pdev->name)) {
+		dev_err(&pdev->dev, "Memory region busy\n");
+		ret = -EBUSY;
+		goto request_mem_failed;
+	}
+
+	i2c->base = ioremap(res->start, res->end - res->start + 1);
+	if (!i2c->base) {
+		dev_err(&pdev->dev, "Unable to map registers\n");
+		ret = -EIO;
+		goto map_failed;
+	}
+
+	i2c->regstep = pdata->regstep;
+	ocores_init(i2c, pdata);
+
+	init_waitqueue_head(&i2c->wait);
+	ret = request_irq(res2->start, ocores_isr, 0, pdev->name, i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto request_irq_failed;
+	}
+
+	/* hook up driver to tree */
+	platform_set_drvdata(pdev, i2c);
+	i2c->adap = ocores_adapter;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &pdev->dev;
+
+	/* add i2c adapter to i2c tree */
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add adapter\n");
+		goto add_adapter_failed;
+	}
+
+	return 0;
+
+add_adapter_failed:
+	free_irq(res2->start, i2c);
+request_irq_failed:
+	iounmap(i2c->base);
+map_failed:
+	release_mem_region(res->start, res->end - res->start + 1);
+request_mem_failed:
+	kfree(i2c);
+
+	return ret;
+}
+
+static int __devexit ocores_i2c_remove(struct platform_device* pdev)
+{
+	struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	/* disable i2c logic */
+	oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL)
+		  & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+	/* remove adapter & data */
+	i2c_del_adapter(&i2c->adap);
+	platform_set_drvdata(pdev, NULL);
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res)
+		free_irq(res->start, i2c);
+
+	iounmap(i2c->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, res->end - res->start + 1);
+
+	kfree(i2c);
+
+	return 0;
+}
+
+static struct platform_driver ocores_i2c_driver = {
+	.probe  = ocores_i2c_probe,
+	.remove = __devexit_p(ocores_i2c_remove),
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "ocores-i2c",
+	},
+};
+
+static int __init ocores_i2c_init(void)
+{
+	return platform_driver_register(&ocores_i2c_driver);
+}
+
+static void __exit ocores_i2c_exit(void)
+{
+	platform_driver_unregister(&ocores_i2c_driver);
+}
+
+module_init(ocores_i2c_init);
+module_exit(ocores_i2c_exit);
+
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("OpenCores I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index d9c7c00e71f9..8f2f65b793b9 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -102,13 +102,6 @@ MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the PIIX4 at the given address. "
 		 "EXTREMELY DANGEROUS!");
 
-/* If fix_hstcfg is set to anything different from 0, we reset one of the
-   registers to be a valid value. */
-static int fix_hstcfg;
-module_param (fix_hstcfg, int, 0);
-MODULE_PARM_DESC(fix_hstcfg,
-		"Fix config register. Needed on some boards (Force CPCI735).");
-
 static int piix4_transaction(void);
 
 static unsigned short piix4_smba;
@@ -137,7 +130,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 	/* Don't access SMBus on IBM systems which get corrupted eeproms */
 	if (dmi_check_system(piix4_dmi_table) &&
 			PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
-		dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
+		dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
 			"may corrupt your serial eeprom! Refusing to load "
 			"module!\n");
 		return -EPERM;
@@ -166,22 +159,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 
 	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
 
-	/* Some BIOS will set up the chipset incorrectly and leave a register
-	   in an undefined state (causing I2C to act very strangely). */
-	if (temp & 0x02) {
-		if (fix_hstcfg) {
-			dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
-					"(I2C)\n");
-			temp &= 0xfd;
-			pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
-		} else {
-			dev_info(&PIIX4_dev->dev, "Unusual config register "
-					"value\n");
-			dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
-					"you experience problems\n");
-		}
-	}
- 
 	/* If force_addr is set, we program the new address here. Just to make
 	   sure, we disable the PIIX4 first. */
 	if (force_addr) {
@@ -214,7 +191,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 		}
 	}
 
-	if ((temp & 0x0E) == 8)
+	if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
 		dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
 	else if ((temp & 0x0E) == 0)
 		dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
@@ -413,6 +390,12 @@ static struct i2c_adapter piix4_adapter = {
 static struct pci_device_id piix4_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3),
 	  .driver_data = 3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS),
+	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index df786eb55295..2a0b3be7cdd0 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -20,7 +20,6 @@
 
 */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 5155010b455e..ee114b48face 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -968,7 +968,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 #endif
 
 	pxa_set_cken(CKEN14_I2C, 1);
-	ret = request_irq(IRQ_I2C, i2c_pxa_handler, SA_INTERRUPT,
+	ret = request_irq(IRQ_I2C, i2c_pxa_handler, IRQF_DISABLED,
 			  "pxa2xx-i2c", i2c);
 	if (ret)
 		goto out;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index f7d40f8e5f5c..5d2950e91fc5 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -20,7 +20,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 
@@ -829,7 +828,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	ret = request_irq(res->start, s3c24xx_i2c_irq, SA_INTERRUPT,
+	ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
 			  pdev->name, i2c);
 
 	if (ret != 0) {
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 766cc969c4d0..22a3eda04166 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -33,7 +33,6 @@
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <asm/io.h>
-#include <asm/msr.h>
 
 #include <linux/scx200.h>
 
@@ -85,6 +84,10 @@ struct scx200_acb_iface {
 	u8 *ptr;
 	char needs_reset;
 	unsigned len;
+
+	/* PCI device info */
+	struct pci_dev *pdev;
+	int bar;
 };
 
 /* Register Definitions */
@@ -381,7 +384,7 @@ static struct i2c_algorithm scx200_acb_algorithm = {
 static struct scx200_acb_iface *scx200_acb_list;
 static DECLARE_MUTEX(scx200_acb_list_mutex);
 
-static int scx200_acb_probe(struct scx200_acb_iface *iface)
+static __init int scx200_acb_probe(struct scx200_acb_iface *iface)
 {
 	u8 val;
 
@@ -417,17 +420,16 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface)
 	return 0;
 }
 
-static int  __init scx200_acb_create(const char *text, int base, int index)
+static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
+		int index)
 {
 	struct scx200_acb_iface *iface;
 	struct i2c_adapter *adapter;
-	int rc;
 
 	iface = kzalloc(sizeof(*iface), GFP_KERNEL);
 	if (!iface) {
 		printk(KERN_ERR NAME ": can't allocate memory\n");
-		rc = -ENOMEM;
-		goto errout;
+		return NULL;
 	}
 
 	adapter = &iface->adapter;
@@ -440,26 +442,27 @@ static int  __init scx200_acb_create(const char *text, int base, int index)
 
 	mutex_init(&iface->mutex);
 
-	if (!request_region(base, 8, adapter->name)) {
-		printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
-			base, base + 8-1);
-		rc = -EBUSY;
-		goto errout_free;
-	}
-	iface->base = base;
+	return iface;
+}
+
+static int __init scx200_acb_create(struct scx200_acb_iface *iface)
+{
+	struct i2c_adapter *adapter;
+	int rc;
+
+	adapter = &iface->adapter;
 
 	rc = scx200_acb_probe(iface);
 	if (rc) {
 		printk(KERN_WARNING NAME ": probe failed\n");
-		goto errout_release;
+		return rc;
 	}
 
 	scx200_acb_reset(iface);
 
 	if (i2c_add_adapter(adapter) < 0) {
 		printk(KERN_ERR NAME ": failed to register\n");
-		rc = -ENODEV;
-		goto errout_release;
+		return -ENODEV;
 	}
 
 	down(&scx200_acb_list_mutex);
@@ -468,64 +471,148 @@ static int  __init scx200_acb_create(const char *text, int base, int index)
 	up(&scx200_acb_list_mutex);
 
 	return 0;
+}
 
- errout_release:
-	release_region(iface->base, 8);
+static __init int scx200_create_pci(const char *text, struct pci_dev *pdev,
+		int bar)
+{
+	struct scx200_acb_iface *iface;
+	int rc;
+
+	iface = scx200_create_iface(text, 0);
+
+	if (iface == NULL)
+		return -ENOMEM;
+
+	iface->pdev = pdev;
+	iface->bar = bar;
+
+	pci_enable_device_bars(iface->pdev, 1 << iface->bar);
+
+	rc = pci_request_region(iface->pdev, iface->bar, iface->adapter.name);
+
+	if (rc != 0) {
+		printk(KERN_ERR NAME ": can't allocate PCI BAR %d\n",
+				iface->bar);
+		goto errout_free;
+	}
+
+	iface->base = pci_resource_start(iface->pdev, iface->bar);
+	rc = scx200_acb_create(iface);
+
+	if (rc == 0)
+		return 0;
+
+	pci_release_region(iface->pdev, iface->bar);
+	pci_dev_put(iface->pdev);
  errout_free:
 	kfree(iface);
- errout:
 	return rc;
 }
 
-static struct pci_device_id scx200[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
-	{ },
-};
+static int __init scx200_create_isa(const char *text, unsigned long base,
+		int index)
+{
+	struct scx200_acb_iface *iface;
+	int rc;
+
+	iface = scx200_create_iface(text, index);
+
+	if (iface == NULL)
+		return -ENOMEM;
+
+	if (request_region(base, 8, iface->adapter.name) == 0) {
+		printk(KERN_ERR NAME ": can't allocate io 0x%lx-0x%lx\n",
+		       base, base + 8 - 1);
+		rc = -EBUSY;
+		goto errout_free;
+	}
+
+	iface->base = base;
+	rc = scx200_acb_create(iface);
+
+	if (rc == 0)
+		return 0;
 
-static struct pci_device_id divil_pci[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_NS,  PCI_DEVICE_ID_NS_CS5535_ISA) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
-	{ } /* NULL entry */
+	release_region(base, 8);
+ errout_free:
+	kfree(iface);
+	return rc;
+}
+
+/* Driver data is an index into the scx200_data array that indicates
+ * the name and the BAR where the I/O address resource is located.  ISA
+ * devices are flagged with a bar value of -1 */
+
+static struct pci_device_id scx200_pci[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA),
+	  .driver_data = 1 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA),
+	  .driver_data = 2 }
 };
 
-#define MSR_LBAR_SMB		0x5140000B
+static struct {
+	const char *name;
+	int bar;
+} scx200_data[] = {
+	{ "SCx200", -1 },
+	{ "CS5535",  0 },
+	{ "CS5536",  0 }
+};
 
-static __init int scx200_add_cs553x(void)
+static __init int scx200_scan_pci(void)
 {
-	u32	low, hi;
-	u32	smb_base;
-
-	/* Grab & reserve the SMB I/O range */
-	rdmsr(MSR_LBAR_SMB, low, hi);
+	int data, dev;
+	int rc = -ENODEV;
+	struct pci_dev *pdev;
+
+	for(dev = 0; dev < ARRAY_SIZE(scx200_pci); dev++) {
+		pdev = pci_get_device(scx200_pci[dev].vendor,
+				scx200_pci[dev].device, NULL);
+
+		if (pdev == NULL)
+			continue;
+
+		data = scx200_pci[dev].driver_data;
+
+		/* if .bar is greater or equal to zero, this is a
+		 * PCI device - otherwise, we assume
+		   that the ports are ISA based
+		*/
+
+		if (scx200_data[data].bar >= 0)
+			rc = scx200_create_pci(scx200_data[data].name, pdev,
+					scx200_data[data].bar);
+		else {
+			int i;
+
+			for (i = 0; i < MAX_DEVICES; ++i) {
+				if (base[i] == 0)
+					continue;
+
+				rc = scx200_create_isa(scx200_data[data].name,
+						base[i],
+						i);
+			}
+		}
 
-	/* Check the IO mask and whether SMB is enabled */
-	if (hi != 0x0000F001) {
-		printk(KERN_WARNING NAME ": SMBus not enabled\n");
-		return -ENODEV;
+		break;
 	}
 
-	/* SMBus IO size is 8 bytes */
-	smb_base = low & 0x0000FFF8;
-
-	return scx200_acb_create("CS5535", smb_base, 0);
+	return rc;
 }
 
 static int __init scx200_acb_init(void)
 {
-	int i;
-	int	rc = -ENODEV;
+	int rc;
 
 	pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n");
 
-	/* Verify that this really is a SCx200 processor */
-	if (pci_dev_present(scx200)) {
-		for (i = 0; i < MAX_DEVICES; ++i) {
-			if (base[i] > 0)
-				rc = scx200_acb_create("SCx200", base[i], i);
-		}
-	} else if (pci_dev_present(divil_pci))
-		rc = scx200_add_cs553x();
+	rc = scx200_scan_pci();
 
 	/* If at least one bus was created, init must succeed */
 	if (scx200_acb_list)
@@ -543,7 +630,14 @@ static void __exit scx200_acb_cleanup(void)
 		up(&scx200_acb_list_mutex);
 
 		i2c_del_adapter(&iface->adapter);
-		release_region(iface->base, 8);
+
+		if (iface->pdev) {
+			pci_release_region(iface->pdev, iface->bar);
+			pci_dev_put(iface->pdev);
+		}
+		else
+			release_region(iface->base, 8);
+
 		kfree(iface);
 		down(&scx200_acb_list_mutex);
 	}
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index 27fbfecc414f..cb3ef5ac99fd 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -21,7 +21,6 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     
 */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>