Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...

3 files changed, 297 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 796569eeaf1d..842b0043ad94 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -321,6 +321,14 @@ config SENSORS_APPLESMC
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of applesmc.
 
+config SENSORS_ARM_SCPI
+	tristate "ARM SCPI Sensors"
+	depends on ARM_SCPI_PROTOCOL
+	help
+	  This driver provides support for temperature, voltage, current
+	  and power sensors available on ARM Ltd's SCP based platforms. The
+	  actual number and type of sensors exported depend on the platform.
+
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
 	depends on X86 && I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 01855ee641d1..12a32398fdcc 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
+obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
new file mode 100644
index 000000000000..2c1241bbf9af
--- /dev/null
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -0,0 +1,288 @@
+/*
+ * System Control and Power Interface(SCPI) based hwmon sensor driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Punit Agrawal <punit.agrawal@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+struct sensor_data {
+	struct scpi_sensor_info info;
+	struct device_attribute dev_attr_input;
+	struct device_attribute dev_attr_label;
+	char input[20];
+	char label[20];
+};
+
+struct scpi_thermal_zone {
+	struct list_head list;
+	int sensor_id;
+	struct scpi_sensors *scpi_sensors;
+	struct thermal_zone_device *tzd;
+};
+
+struct scpi_sensors {
+	struct scpi_ops *scpi_ops;
+	struct sensor_data *data;
+	struct list_head thermal_zones;
+	struct attribute **attrs;
+	struct attribute_group group;
+	const struct attribute_group *groups[2];
+};
+
+static int scpi_read_temp(void *dev, int *temp)
+{
+	struct scpi_thermal_zone *zone = dev;
+	struct scpi_sensors *scpi_sensors = zone->scpi_sensors;
+	struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+	struct sensor_data *sensor = &scpi_sensors->data[zone->sensor_id];
+	u32 value;
+	int ret;
+
+	ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+	if (ret)
+		return ret;
+
+	*temp = value;
+	return 0;
+}
+
+/* hwmon callback functions */
+static ssize_t
+scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scpi_sensors *scpi_sensors = dev_get_drvdata(dev);
+	struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+	struct sensor_data *sensor;
+	u32 value;
+	int ret;
+
+	sensor = container_of(attr, struct sensor_data, dev_attr_input);
+
+	ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t
+scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_data *sensor;
+
+	sensor = container_of(attr, struct sensor_data, dev_attr_label);
+
+	return sprintf(buf, "%s\n", sensor->info.name);
+}
+
+static void
+unregister_thermal_zones(struct platform_device *pdev,
+			 struct scpi_sensors *scpi_sensors)
+{
+	struct list_head *pos;
+
+	list_for_each(pos, &scpi_sensors->thermal_zones) {
+		struct scpi_thermal_zone *zone;
+
+		zone = list_entry(pos, struct scpi_thermal_zone, list);
+		thermal_zone_of_sensor_unregister(&pdev->dev, zone->tzd);
+	}
+}
+
+static struct thermal_zone_of_device_ops scpi_sensor_ops = {
+	.get_temp = scpi_read_temp,
+};
+
+static int scpi_hwmon_probe(struct platform_device *pdev)
+{
+	u16 nr_sensors, i;
+	int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
+	struct scpi_ops *scpi_ops;
+	struct device *hwdev, *dev = &pdev->dev;
+	struct scpi_sensors *scpi_sensors;
+	int ret;
+
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EPROBE_DEFER;
+
+	ret = scpi_ops->sensor_get_capability(&nr_sensors);
+	if (ret)
+		return ret;
+
+	if (!nr_sensors)
+		return -ENODEV;
+
+	scpi_sensors = devm_kzalloc(dev, sizeof(*scpi_sensors), GFP_KERNEL);
+	if (!scpi_sensors)
+		return -ENOMEM;
+
+	scpi_sensors->data = devm_kcalloc(dev, nr_sensors,
+				   sizeof(*scpi_sensors->data), GFP_KERNEL);
+	if (!scpi_sensors->data)
+		return -ENOMEM;
+
+	scpi_sensors->attrs = devm_kcalloc(dev, (nr_sensors * 2) + 1,
+				   sizeof(*scpi_sensors->attrs), GFP_KERNEL);
+	if (!scpi_sensors->attrs)
+		return -ENOMEM;
+
+	scpi_sensors->scpi_ops = scpi_ops;
+
+	for (i = 0; i < nr_sensors; i++) {
+		struct sensor_data *sensor = &scpi_sensors->data[i];
+
+		ret = scpi_ops->sensor_get_info(i, &sensor->info);
+		if (ret)
+			return ret;
+
+		switch (sensor->info.class) {
+		case TEMPERATURE:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "temp%d_input", num_temp + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "temp%d_label", num_temp + 1);
+			num_temp++;
+			break;
+		case VOLTAGE:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "in%d_input", num_volt);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "in%d_label", num_volt);
+			num_volt++;
+			break;
+		case CURRENT:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "curr%d_input", num_current + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "curr%d_label", num_current + 1);
+			num_current++;
+			break;
+		case POWER:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "power%d_input", num_power + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "power%d_label", num_power + 1);
+			num_power++;
+			break;
+		default:
+			break;
+		}
+
+		sensor->dev_attr_input.attr.mode = S_IRUGO;
+		sensor->dev_attr_input.show = scpi_show_sensor;
+		sensor->dev_attr_input.attr.name = sensor->input;
+
+		sensor->dev_attr_label.attr.mode = S_IRUGO;
+		sensor->dev_attr_label.show = scpi_show_label;
+		sensor->dev_attr_label.attr.name = sensor->label;
+
+		scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
+		scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
+
+		sysfs_attr_init(scpi_sensors->attrs[i << 1]);
+		sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
+	}
+
+	scpi_sensors->group.attrs = scpi_sensors->attrs;
+	scpi_sensors->groups[0] = &scpi_sensors->group;
+
+	platform_set_drvdata(pdev, scpi_sensors);
+
+	hwdev = devm_hwmon_device_register_with_groups(dev,
+			"scpi_sensors", scpi_sensors, scpi_sensors->groups);
+
+	if (IS_ERR(hwdev))
+		return PTR_ERR(hwdev);
+
+	/*
+	 * Register the temperature sensors with the thermal framework
+	 * to allow their usage in setting up the thermal zones from
+	 * device tree.
+	 *
+	 * NOTE: Not all temperature sensors maybe used for thermal
+	 * control
+	 */
+	INIT_LIST_HEAD(&scpi_sensors->thermal_zones);
+	for (i = 0; i < nr_sensors; i++) {
+		struct sensor_data *sensor = &scpi_sensors->data[i];
+		struct scpi_thermal_zone *zone;
+
+		if (sensor->info.class != TEMPERATURE)
+			continue;
+
+		zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL);
+		if (!zone) {
+			ret = -ENOMEM;
+			goto unregister_tzd;
+		}
+
+		zone->sensor_id = i;
+		zone->scpi_sensors = scpi_sensors;
+		zone->tzd = thermal_zone_of_sensor_register(dev, i, zone,
+							    &scpi_sensor_ops);
+		/*
+		 * The call to thermal_zone_of_sensor_register returns
+		 * an error for sensors that are not associated with
+		 * any thermal zones or if the thermal subsystem is
+		 * not configured.
+		 */
+		if (IS_ERR(zone->tzd)) {
+			devm_kfree(dev, zone);
+			continue;
+		}
+		list_add(&zone->list, &scpi_sensors->thermal_zones);
+	}
+
+	return 0;
+
+unregister_tzd:
+	unregister_thermal_zones(pdev, scpi_sensors);
+	return ret;
+}
+
+static int scpi_hwmon_remove(struct platform_device *pdev)
+{
+	struct scpi_sensors *scpi_sensors = platform_get_drvdata(pdev);
+
+	unregister_thermal_zones(pdev, scpi_sensors);
+
+	return 0;
+}
+
+static const struct of_device_id scpi_of_match[] = {
+	{.compatible = "arm,scpi-sensors"},
+	{},
+};
+
+static struct platform_driver scpi_hwmon_platdrv = {
+	.driver = {
+		.name	= "scpi-hwmon",
+		.owner	= THIS_MODULE,
+		.of_match_table = scpi_of_match,
+	},
+	.probe		= scpi_hwmon_probe,
+	.remove		= scpi_hwmon_remove,
+};
+module_platform_driver(scpi_hwmon_platdrv);
+
+MODULE_AUTHOR("Punit Agrawal <punit.agrawal@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI HWMON interface driver");
+MODULE_LICENSE("GPL v2");