[PATCH] I2C: Move hwmon drivers (2/3)

Part 2: Move the driver files themselves.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 817 insertions, 0 deletions

diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
new file mode 100644
index 000000000000..6bbfc8fb4f13
--- /dev/null
+++ b/drivers/hwmon/sis5595.c
@@ -0,0 +1,817 @@
+/*
+    sis5595.c - Part of lm_sensors, Linux kernel modules
+		for hardware monitoring
+
+    Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
+			Ky�sti M�lkki <kmalkki@cc.hut.fi>, and
+			Mark D. Studebaker <mdsxyz123@yahoo.com>
+    Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
+    the help of Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   SiS southbridge has a LM78-like chip integrated on the same IC.
+   This driver is a customized copy of lm78.c
+   
+   Supports following revisions:
+	Version		PCI ID		PCI Revision
+	1		1039/0008	AF or less
+	2		1039/0008	B0 or greater
+
+   Note: these chips contain a 0008 device which is incompatible with the
+	 5595. We recognize these by the presence of the listed
+	 "blacklist" PCI ID and refuse to load.
+
+   NOT SUPPORTED	PCI ID		BLACKLIST PCI ID	
+	 540		0008		0540
+	 550		0008		0550
+	5513		0008		5511
+	5581		0008		5597
+	5582		0008		5597
+	5597		0008		5597
+	5598		0008		5597/5598
+	 630		0008		0630
+	 645		0008		0645
+	 730		0008		0730
+	 735		0008		0735
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <asm/io.h>
+
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+
+/* Addresses to scan.
+   Note that we can't determine the ISA address until we have initialized
+   our module */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(sis5595);
+
+/* Many SIS5595 constants specified below */
+
+/* Length of ISA address segment */
+#define SIS5595_EXTENT 8
+/* PCI Config Registers */
+#define SIS5595_REVISION_REG 0x08
+#define SIS5595_BASE_REG 0x68
+#define SIS5595_PIN_REG 0x7A
+#define SIS5595_ENABLE_REG 0x7B
+
+/* Where are the ISA address/data registers relative to the base address */
+#define SIS5595_ADDR_REG_OFFSET 5
+#define SIS5595_DATA_REG_OFFSET 6
+
+/* The SIS5595 registers */
+#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
+#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
+#define SIS5595_REG_IN(nr) (0x20 + (nr))
+
+#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
+#define SIS5595_REG_FAN(nr) (0x28 + (nr))
+
+/* On the first version of the chip, the temp registers are separate.
+   On the second version,
+   TEMP pin is shared with IN4, configured in PCI register 0x7A.
+   The registers are the same as well.
+   OVER and HYST are really MAX and MIN. */
+
+#define REV2MIN	0xb0
+#define SIS5595_REG_TEMP 	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN(4) : 0x27
+#define SIS5595_REG_TEMP_OVER	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MAX(4) : 0x39
+#define SIS5595_REG_TEMP_HYST	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MIN(4) : 0x3a
+
+#define SIS5595_REG_CONFIG 0x40
+#define SIS5595_REG_ALARM1 0x41
+#define SIS5595_REG_ALARM2 0x42
+#define SIS5595_REG_FANDIV 0x47
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants. */
+
+/* IN: mV, (0V to 4.08V)
+   REG: 16mV/bit */
+static inline u8 IN_TO_REG(unsigned long val)
+{
+	unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
+	return (nval + 8) / 16;
+}
+#define IN_FROM_REG(val) ((val) *  16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm <= 0)
+		return 255;
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static inline int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* TEMP: mC (-54.12C to +157.53C)
+   REG: 0.83C/bit + 52.12, two's complement  */
+static inline int TEMP_FROM_REG(s8 val)
+{
+	return val * 830 + 52120;
+}
+static inline s8 TEMP_TO_REG(int val)
+{
+	int nval = SENSORS_LIMIT(val, -54120, 157530) ;
+	return nval<0 ? (nval-5212-415)/830 : (nval-5212+415)/830;
+}
+
+/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
+   REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
+static inline u8 DIV_TO_REG(int val)
+{
+	return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* For the SIS5595, we need to keep some data in memory. That
+   data is pointed to by sis5595_list[NR]->data. The structure itself is
+   dynamically allocated, at the time when the new sis5595 client is
+   allocated. */
+struct sis5595_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	char maxins;		/* == 3 if temp enabled, otherwise == 4 */
+	u8 revision;		/* Reg. value */
+
+	u8 in[5];		/* Register value */
+	u8 in_max[5];		/* Register value */
+	u8 in_min[5];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	s8 temp;		/* Register value */
+	s8 temp_over;		/* Register value */
+	s8 temp_hyst;		/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+static struct pci_dev *s_bridge;	/* pointer to the (only) sis5595 */
+
+static int sis5595_attach_adapter(struct i2c_adapter *adapter);
+static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind);
+static int sis5595_detach_client(struct i2c_client *client);
+
+static int sis5595_read_value(struct i2c_client *client, u8 register);
+static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value);
+static struct sis5595_data *sis5595_update_device(struct device *dev);
+static void sis5595_init_client(struct i2c_client *client);
+
+static struct i2c_driver sis5595_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "sis5595",
+	.id		= I2C_DRIVERID_SIS5595,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= sis5595_attach_adapter,
+	.detach_client	= sis5595_detach_client,
+};
+
+/* 4 Voltages */
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+	       size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct device *dev, const char *buf,
+	       size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_in_offset(offset)					\
+static ssize_t							\
+	show_in##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, 		\
+		show_in##offset, NULL);				\
+static ssize_t							\
+	show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	return show_in_min(dev, buf, offset);			\
+}								\
+static ssize_t							\
+	show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	return show_in_max(dev, buf, offset);			\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+
+/* Temperature */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_over = TEMP_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst = TEMP_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+		show_temp_over, set_temp_over);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+		show_temp_hyst, set_temp_hyst);
+
+/* 2 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int reg;
+
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			DIV_FROM_REG(data->fan_div[nr]));
+	reg = sis5595_read_value(client, SIS5595_REG_FANDIV);
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			"supported. Choose one of 1, 2, 4 or 8!\n", val);
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	
+	switch (nr) {
+	case 0:
+		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
+		break;
+	case 1:
+		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
+		break;
+	}
+	sis5595_write_value(client, SIS5595_REG_FANDIV, reg);
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+show_fan_offset(1);
+show_fan_offset(2);
+
+static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 0) ;
+}
+
+static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 1) ;
+}
+static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+		show_fan_1_div, set_fan_1_div);
+static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
+		show_fan_2_div, set_fan_2_div);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+ 
+/* This is called when the module is loaded */
+static int sis5595_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, sis5595_detect);
+}
+
+int sis5595_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int err = 0;
+	int i;
+	struct i2c_client *new_client;
+	struct sis5595_data *data;
+	char val;
+	u16 a;
+
+	/* Make sure we are probing the ISA bus!!  */
+	if (!i2c_is_isa_adapter(adapter))
+		goto exit;
+
+	if (force_addr)
+		address = force_addr & ~(SIS5595_EXTENT - 1);
+	/* Reserve the ISA region */
+	if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) {
+		err = -EBUSY;
+		goto exit;
+	}
+	if (force_addr) {
+		dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address);
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_word(s_bridge, SIS5595_BASE_REG, address))
+			goto exit_release;
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a))
+			goto exit_release;
+		if ((a & ~(SIS5595_EXTENT - 1)) != address)
+			/* doesn't work for some chips? */
+			goto exit_release;
+	}
+
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) {
+		goto exit_release;
+	}
+	if ((val & 0x80) == 0) {
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG,
+					  val | 0x80))
+			goto exit_release;
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val))
+			goto exit_release;
+		if ((val & 0x80) == 0) 
+			/* doesn't work for some chips! */
+			goto exit_release;
+	}
+
+	if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+	memset(data, 0, sizeof(struct sis5595_data));
+
+	new_client = &data->client;
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->adapter = adapter;
+	new_client->driver = &sis5595_driver;
+	new_client->flags = 0;
+
+	/* Check revision and pin registers to determine whether 4 or 5 voltages */
+	pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision));
+	/* 4 voltages, 1 temp */
+	data->maxins = 3;
+	if (data->revision >= REV2MIN) {
+		pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
+		if (!(val & 0x80))
+			/* 5 voltages, no temps */
+			data->maxins = 4;
+	}
+	
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE);
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+	
+	/* Initialize the SIS5595 chip */
+	sis5595_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 0; i < 2; i++) {
+		data->fan_min[i] = sis5595_read_value(new_client,
+					SIS5595_REG_FAN_MIN(i));
+	}
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	if (data->maxins == 4) {
+		device_create_file(&new_client->dev, &dev_attr_in4_input);
+		device_create_file(&new_client->dev, &dev_attr_in4_min);
+		device_create_file(&new_client->dev, &dev_attr_in4_max);
+	}
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	if (data->maxins == 3) {
+		device_create_file(&new_client->dev, &dev_attr_temp1_input);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	}
+	return 0;
+	
+exit_free:
+	kfree(data);
+exit_release:
+	release_region(address, SIS5595_EXTENT);
+exit:
+	return err;
+}
+
+static int sis5595_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if (i2c_is_isa_client(client))
+		release_region(client->addr, SIS5595_EXTENT);
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+
+/* ISA access must be locked explicitly. */
+static int sis5595_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	down(&data->lock);
+	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
+	res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET);
+	up(&data->lock);
+	return res;
+}
+
+static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	down(&data->lock);
+	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
+	outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET);
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new SIS5595. */
+static void sis5595_init_client(struct i2c_client *client)
+{
+	u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG);
+	if (!(config & 0x01))
+		sis5595_write_value(client, SIS5595_REG_CONFIG,
+				(config & 0xf7) | 0x01);
+}
+
+static struct sis5595_data *sis5595_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		for (i = 0; i <= data->maxins; i++) {
+			data->in[i] =
+			    sis5595_read_value(client, SIS5595_REG_IN(i));
+			data->in_min[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_IN_MIN(i));
+			data->in_max[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_IN_MAX(i));
+		}
+		for (i = 0; i < 2; i++) {
+			data->fan[i] =
+			    sis5595_read_value(client, SIS5595_REG_FAN(i));
+			data->fan_min[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_FAN_MIN(i));
+		}
+		if (data->maxins == 3) {
+			data->temp =
+			    sis5595_read_value(client, SIS5595_REG_TEMP);
+			data->temp_over =
+			    sis5595_read_value(client, SIS5595_REG_TEMP_OVER);
+			data->temp_hyst =
+			    sis5595_read_value(client, SIS5595_REG_TEMP_HYST);
+		}
+		i = sis5595_read_value(client, SIS5595_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms =
+		    sis5595_read_value(client, SIS5595_REG_ALARM1) |
+		    (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static struct pci_device_id sis5595_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
+
+static int blacklist[] __devinitdata = {
+	PCI_DEVICE_ID_SI_540,
+	PCI_DEVICE_ID_SI_550,
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_645,
+	PCI_DEVICE_ID_SI_730,
+	PCI_DEVICE_ID_SI_735,
+	PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but
+				  that ID shows up in other chips so we
+				  use the 5511 ID for recognition */
+	PCI_DEVICE_ID_SI_5597,
+	PCI_DEVICE_ID_SI_5598,
+	0 };
+
+static int __devinit sis5595_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	u16 val;
+	int *i;
+	int addr = 0;
+
+	for (i = blacklist; *i != 0; i++) {
+		struct pci_dev *dev;
+		dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
+		if (dev) {
+			dev_err(&dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
+			pci_dev_put(dev);
+			return -ENODEV;
+		}
+	}
+	
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_word(dev, SIS5595_BASE_REG, &val))
+		return -ENODEV;
+	
+	addr = val & ~(SIS5595_EXTENT - 1);
+	if (addr == 0 && force_addr == 0) {
+		dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+	if (force_addr)
+		addr = force_addr;	/* so detect will get called */
+
+	if (!addr) {
+		dev_err(&dev->dev,"No SiS 5595 sensors found.\n");
+		return -ENODEV;
+	}
+	normal_isa[0] = addr;
+
+	s_bridge = pci_dev_get(dev);
+	if (i2c_add_driver(&sis5595_driver)) {
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+}
+
+static struct pci_driver sis5595_pci_driver = {
+	.name            = "sis5595",
+	.id_table        = sis5595_pci_ids,
+	.probe           = sis5595_pci_probe,
+};
+
+static int __init sm_sis5595_init(void)
+{
+	return pci_register_driver(&sis5595_pci_driver);
+}
+
+static void __exit sm_sis5595_exit(void)
+{
+	pci_unregister_driver(&sis5595_pci_driver);
+	if (s_bridge != NULL) {
+		i2c_del_driver(&sis5595_driver);
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+}
+
+MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+MODULE_DESCRIPTION("SiS 5595 Sensor device");
+MODULE_LICENSE("GPL");
+
+module_init(sm_sis5595_init);
+module_exit(sm_sis5595_exit);