Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 3299 insertions, 0 deletions

diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
new file mode 100644
index 000000000000..5bcbeb0cb9ae
--- /dev/null
+++ b/drivers/char/rocket.c
@@ -0,0 +1,3299 @@
+/*
+ * RocketPort device driver for Linux
+ *
+ * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
+ * 
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Kernel Synchronization:
+ *
+ * This driver has 2 kernel control paths - exception handlers (calls into the driver
+ * from user mode) and the timer bottom half (tasklet).  This is a polled driver, interrupts
+ * are not used.
+ *
+ * Critical data: 
+ * -  rp_table[], accessed through passed "info" pointers, is a global (static) array of 
+ *    serial port state information and the xmit_buf circular buffer.  Protected by 
+ *    a per port spinlock.
+ * -  xmit_flags[], an array of ints indexed by line (port) number, indicating that there
+ *    is data to be transmitted.  Protected by atomic bit operations.
+ * -  rp_num_ports, int indicating number of open ports, protected by atomic operations.
+ * 
+ * rp_write() and rp_write_char() functions use a per port semaphore to protect against
+ * simultaneous access to the same port by more than one process.
+ */
+
+/****** Defines ******/
+#ifdef PCI_NUM_RESOURCES
+#define PCI_BASE_ADDRESS(dev, r) ((dev)->resource[r].start)
+#else
+#define PCI_BASE_ADDRESS(dev, r) ((dev)->base_address[r])
+#endif
+
+#define ROCKET_PARANOIA_CHECK
+#define ROCKET_DISABLE_SIMUSAGE
+
+#undef ROCKET_SOFT_FLOW
+#undef ROCKET_DEBUG_OPEN
+#undef ROCKET_DEBUG_INTR
+#undef ROCKET_DEBUG_WRITE
+#undef ROCKET_DEBUG_FLOW
+#undef ROCKET_DEBUG_THROTTLE
+#undef ROCKET_DEBUG_WAIT_UNTIL_SENT
+#undef ROCKET_DEBUG_RECEIVE
+#undef ROCKET_DEBUG_HANGUP
+#undef REV_PCI_ORDER
+#undef ROCKET_DEBUG_IO
+
+#define POLL_PERIOD HZ/100	/*  Polling period .01 seconds (10ms) */
+
+/****** Kernel includes ******/
+
+#ifdef MODVERSIONS
+#include <config/modversions.h>
+#endif				
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/pci.h>
+#include <asm/uaccess.h>
+#include <asm/atomic.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <asm/semaphore.h>
+#include <linux/init.h>
+
+/****** RocketPort includes ******/
+
+#include "rocket_int.h"
+#include "rocket.h"
+
+#define ROCKET_VERSION "2.09"
+#define ROCKET_DATE "12-June-2003"
+
+/****** RocketPort Local Variables ******/
+
+static struct tty_driver *rocket_driver;
+
+static struct rocket_version driver_version = {	
+	ROCKET_VERSION, ROCKET_DATE
+};
+
+static struct r_port *rp_table[MAX_RP_PORTS];	       /*  The main repository of serial port state information. */
+static unsigned int xmit_flags[NUM_BOARDS];	       /*  Bit significant, indicates port had data to transmit. */
+						       /*  eg.  Bit 0 indicates port 0 has xmit data, ...        */
+static atomic_t rp_num_ports_open;	               /*  Number of serial ports open                           */
+static struct timer_list rocket_timer;
+
+static unsigned long board1;	                       /* ISA addresses, retrieved from rocketport.conf          */
+static unsigned long board2;
+static unsigned long board3;
+static unsigned long board4;
+static unsigned long controller;
+static int support_low_speed;
+static unsigned long modem1;
+static unsigned long modem2;
+static unsigned long modem3;
+static unsigned long modem4;
+static unsigned long pc104_1[8];
+static unsigned long pc104_2[8];
+static unsigned long pc104_3[8];
+static unsigned long pc104_4[8];
+static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 };
+
+static int rp_baud_base[NUM_BOARDS];	               /*  Board config info (Someday make a per-board structure)  */
+static unsigned long rcktpt_io_addr[NUM_BOARDS];
+static int rcktpt_type[NUM_BOARDS];
+static int is_PCI[NUM_BOARDS];
+static rocketModel_t rocketModel[NUM_BOARDS];
+static int max_board;
+
+/*
+ * The following arrays define the interrupt bits corresponding to each AIOP.
+ * These bits are different between the ISA and regular PCI boards and the
+ * Universal PCI boards.
+ */
+
+static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
+	AIOP_INTR_BIT_0,
+	AIOP_INTR_BIT_1,
+	AIOP_INTR_BIT_2,
+	AIOP_INTR_BIT_3
+};
+
+static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
+	UPCI_AIOP_INTR_BIT_0,
+	UPCI_AIOP_INTR_BIT_1,
+	UPCI_AIOP_INTR_BIT_2,
+	UPCI_AIOP_INTR_BIT_3
+};
+
+/*
+ *  Line number is the ttySIx number (x), the Minor number.  We 
+ *  assign them sequentially, starting at zero.  The following 
+ *  array keeps track of the line number assigned to a given board/aiop/channel.
+ */
+static unsigned char lineNumbers[MAX_RP_PORTS];
+static unsigned long nextLineNumber;
+
+/*****  RocketPort Static Prototypes   *********/
+static int __init init_ISA(int i);
+static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
+static void rp_flush_buffer(struct tty_struct *tty);
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
+static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
+static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
+static void rp_start(struct tty_struct *tty);
+
+#ifdef MODULE
+MODULE_AUTHOR("Theodore Ts'o");
+MODULE_DESCRIPTION("Comtrol RocketPort driver");
+module_param(board1, ulong, 0);
+MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
+module_param(board2, ulong, 0);
+MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
+module_param(board3, ulong, 0);
+MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
+module_param(board4, ulong, 0);
+MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
+module_param(controller, ulong, 0);
+MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
+module_param(support_low_speed, bool, 0);
+MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
+module_param(modem1, ulong, 0);
+MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
+module_param(modem2, ulong, 0);
+MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
+module_param(modem3, ulong, 0);
+MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
+module_param(modem4, ulong, 0);
+MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
+module_param_array(pc104_1, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
+module_param_array(pc104_2, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
+module_param_array(pc104_3, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
+module_param_array(pc104_4, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
+
+int rp_init(void);
+static void rp_cleanup_module(void);
+
+module_init(rp_init);
+module_exit(rp_cleanup_module);
+
+#endif
+
+#ifdef MODULE_LICENSE
+MODULE_LICENSE("Dual BSD/GPL");
+#endif
+
+/*************************************************************************/
+/*                     Module code starts here                           */
+
+static inline int rocket_paranoia_check(struct r_port *info,
+					const char *routine)
+{
+#ifdef ROCKET_PARANOIA_CHECK
+	if (!info)
+		return 1;
+	if (info->magic != RPORT_MAGIC) {
+		printk(KERN_INFO "Warning: bad magic number for rocketport struct in %s\n",
+		     routine);
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+
+/*  Serial port receive data function.  Called (from timer poll) when an AIOPIC signals 
+ *  that receive data is present on a serial port.  Pulls data from FIFO, moves it into the 
+ *  tty layer.  
+ */
+static void rp_do_receive(struct r_port *info,
+			  struct tty_struct *tty,
+			  CHANNEL_t * cp, unsigned int ChanStatus)
+{
+	unsigned int CharNStat;
+	int ToRecv, wRecv, space = 0, count;
+	unsigned char *cbuf;
+	char *fbuf;
+	struct tty_ldisc *ld;
+
+	ld = tty_ldisc_ref(tty);
+
+	ToRecv = sGetRxCnt(cp);
+	if (ld)
+		space = ld->receive_room(tty);
+	if (space > 2 * TTY_FLIPBUF_SIZE)
+		space = 2 * TTY_FLIPBUF_SIZE;
+	cbuf = tty->flip.char_buf;
+	fbuf = tty->flip.flag_buf;
+	count = 0;
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_INFO "rp_do_receive(%d, %d)...", ToRecv, space);
+#endif
+
+	/*
+	 * determine how many we can actually read in.  If we can't
+	 * read any in then we have a software overrun condition.
+	 */
+	if (ToRecv > space)
+		ToRecv = space;
+
+	if (ToRecv <= 0)
+		return;
+
+	/*
+	 * if status indicates there are errored characters in the
+	 * FIFO, then enter status mode (a word in FIFO holds
+	 * character and status).
+	 */
+	if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
+		if (!(ChanStatus & STATMODE)) {
+#ifdef ROCKET_DEBUG_RECEIVE
+			printk(KERN_INFO "Entering STATMODE...");
+#endif
+			ChanStatus |= STATMODE;
+			sEnRxStatusMode(cp);
+		}
+	}
+
+	/* 
+	 * if we previously entered status mode, then read down the
+	 * FIFO one word at a time, pulling apart the character and
+	 * the status.  Update error counters depending on status
+	 */
+	if (ChanStatus & STATMODE) {
+#ifdef ROCKET_DEBUG_RECEIVE
+		printk(KERN_INFO "Ignore %x, read %x...", info->ignore_status_mask,
+		       info->read_status_mask);
+#endif
+		while (ToRecv) {
+			CharNStat = sInW(sGetTxRxDataIO(cp));
+#ifdef ROCKET_DEBUG_RECEIVE
+			printk(KERN_INFO "%x...", CharNStat);
+#endif
+			if (CharNStat & STMBREAKH)
+				CharNStat &= ~(STMFRAMEH | STMPARITYH);
+			if (CharNStat & info->ignore_status_mask) {
+				ToRecv--;
+				continue;
+			}
+			CharNStat &= info->read_status_mask;
+			if (CharNStat & STMBREAKH)
+				*fbuf++ = TTY_BREAK;
+			else if (CharNStat & STMPARITYH)
+				*fbuf++ = TTY_PARITY;
+			else if (CharNStat & STMFRAMEH)
+				*fbuf++ = TTY_FRAME;
+			else if (CharNStat & STMRCVROVRH)
+				*fbuf++ = TTY_OVERRUN;
+			else
+				*fbuf++ = 0;
+			*cbuf++ = CharNStat & 0xff;
+			count++;
+			ToRecv--;
+		}
+
+		/*
+		 * after we've emptied the FIFO in status mode, turn
+		 * status mode back off
+		 */
+		if (sGetRxCnt(cp) == 0) {
+#ifdef ROCKET_DEBUG_RECEIVE
+			printk(KERN_INFO "Status mode off.\n");
+#endif
+			sDisRxStatusMode(cp);
+		}
+	} else {
+		/*
+		 * we aren't in status mode, so read down the FIFO two
+		 * characters at time by doing repeated word IO
+		 * transfer.
+		 */
+		wRecv = ToRecv >> 1;
+		if (wRecv)
+			sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
+		if (ToRecv & 1)
+			cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
+		memset(fbuf, 0, ToRecv);
+		cbuf += ToRecv;
+		fbuf += ToRecv;
+		count += ToRecv;
+	}
+	/*  Push the data up to the tty layer */
+	ld->receive_buf(tty, tty->flip.char_buf, tty->flip.flag_buf, count);
+	tty_ldisc_deref(ld);
+}
+
+/*
+ *  Serial port transmit data function.  Called from the timer polling loop as a 
+ *  result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
+ *  to be sent out the serial port.  Data is buffered in rp_table[line].xmit_buf, it is 
+ *  moved to the port's xmit FIFO.  *info is critical data, protected by spinlocks.
+ */
+static void rp_do_transmit(struct r_port *info)
+{
+	int c;
+	CHANNEL_t *cp = &info->channel;
+	struct tty_struct *tty;
+	unsigned long flags;
+
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_INFO "rp_do_transmit ");
+#endif
+	if (!info)
+		return;
+	if (!info->tty) {
+		printk(KERN_INFO  "rp: WARNING rp_do_transmit called with info->tty==NULL\n");
+		clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+		return;
+	}
+
+	spin_lock_irqsave(&info->slock, flags);
+	tty = info->tty;
+	info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
+
+	/*  Loop sending data to FIFO until done or FIFO full */
+	while (1) {
+		if (tty->stopped || tty->hw_stopped)
+			break;
+		c = min(info->xmit_fifo_room, min(info->xmit_cnt, XMIT_BUF_SIZE - info->xmit_tail));
+		if (c <= 0 || info->xmit_fifo_room <= 0)
+			break;
+		sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
+		if (c & 1)
+			sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]);
+		info->xmit_tail += c;
+		info->xmit_tail &= XMIT_BUF_SIZE - 1;
+		info->xmit_cnt -= c;
+		info->xmit_fifo_room -= c;
+#ifdef ROCKET_DEBUG_INTR
+		printk(KERN_INFO "tx %d chars...", c);
+#endif
+	}
+
+	if (info->xmit_cnt == 0)
+		clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+
+	if (info->xmit_cnt < WAKEUP_CHARS) {
+		tty_wakeup(tty);
+		wake_up_interruptible(&tty->write_wait);
+#ifdef ROCKETPORT_HAVE_POLL_WAIT
+		wake_up_interruptible(&tty->poll_wait);
+#endif
+	}
+
+	spin_unlock_irqrestore(&info->slock, flags);
+
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_INFO "(%d,%d,%d,%d)...", info->xmit_cnt, info->xmit_head,
+	       info->xmit_tail, info->xmit_fifo_room);
+#endif
+}
+
+/*
+ *  Called when a serial port signals it has read data in it's RX FIFO.
+ *  It checks what interrupts are pending and services them, including
+ *  receiving serial data.  
+ */
+static void rp_handle_port(struct r_port *info)
+{
+	CHANNEL_t *cp;
+	struct tty_struct *tty;
+	unsigned int IntMask, ChanStatus;
+
+	if (!info)
+		return;
+
+	if ((info->flags & ROCKET_INITIALIZED) == 0) {
+		printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->flags & NOT_INIT\n");
+		return;
+	}
+	if (!info->tty) {
+		printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->tty==NULL\n");
+		return;
+	}
+	cp = &info->channel;
+	tty = info->tty;
+
+	IntMask = sGetChanIntID(cp) & info->intmask;
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_INFO "rp_interrupt %02x...", IntMask);
+#endif
+	ChanStatus = sGetChanStatus(cp);
+	if (IntMask & RXF_TRIG) {	/* Rx FIFO trigger level */
+		rp_do_receive(info, tty, cp, ChanStatus);
+	}
+	if (IntMask & DELTA_CD) {	/* CD change  */
+#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
+		printk(KERN_INFO "ttyR%d CD now %s...", info->line,
+		       (ChanStatus & CD_ACT) ? "on" : "off");
+#endif
+		if (!(ChanStatus & CD_ACT) && info->cd_status) {
+#ifdef ROCKET_DEBUG_HANGUP
+			printk(KERN_INFO "CD drop, calling hangup.\n");
+#endif
+			tty_hangup(tty);
+		}
+		info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
+		wake_up_interruptible(&info->open_wait);
+	}
+#ifdef ROCKET_DEBUG_INTR
+	if (IntMask & DELTA_CTS) {	/* CTS change */
+		printk(KERN_INFO "CTS change...\n");
+	}
+	if (IntMask & DELTA_DSR) {	/* DSR change */
+		printk(KERN_INFO "DSR change...\n");
+	}
+#endif
+}
+
+/*
+ *  The top level polling routine.  Repeats every 1/100 HZ (10ms).
+ */
+static void rp_do_poll(unsigned long dummy)
+{
+	CONTROLLER_t *ctlp;
+	int ctrl, aiop, ch, line, i;
+	unsigned int xmitmask;
+	unsigned int CtlMask;
+	unsigned char AiopMask;
+	Word_t bit;
+
+	/*  Walk through all the boards (ctrl's) */
+	for (ctrl = 0; ctrl < max_board; ctrl++) {
+		if (rcktpt_io_addr[ctrl] <= 0)
+			continue;
+
+		/*  Get a ptr to the board's control struct */
+		ctlp = sCtlNumToCtlPtr(ctrl);
+
+		/*  Get the interupt status from the board */
+#ifdef CONFIG_PCI
+		if (ctlp->BusType == isPCI)
+			CtlMask = sPCIGetControllerIntStatus(ctlp);
+		else
+#endif
+			CtlMask = sGetControllerIntStatus(ctlp);
+
+		/*  Check if any AIOP read bits are set */
+		for (aiop = 0; CtlMask; aiop++) {
+			bit = ctlp->AiopIntrBits[aiop];
+			if (CtlMask & bit) {
+				CtlMask &= ~bit;
+				AiopMask = sGetAiopIntStatus(ctlp, aiop);
+
+				/*  Check if any port read bits are set */
+				for (ch = 0; AiopMask;  AiopMask >>= 1, ch++) {
+					if (AiopMask & 1) {
+
+						/*  Get the line number (/dev/ttyRx number). */
+						/*  Read the data from the port. */
+						line = GetLineNumber(ctrl, aiop, ch);
+						rp_handle_port(rp_table[line]);
+					}
+				}
+			}
+		}
+
+		xmitmask = xmit_flags[ctrl];
+
+		/*
+		 *  xmit_flags contains bit-significant flags, indicating there is data
+		 *  to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port 
+		 *  1, ... (32 total possible).  The variable i has the aiop and ch 
+		 *  numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
+		 */
+		if (xmitmask) {
+			for (i = 0; i < rocketModel[ctrl].numPorts; i++) {
+				if (xmitmask & (1 << i)) {
+					aiop = (i & 0x18) >> 3;
+					ch = i & 0x07;
+					line = GetLineNumber(ctrl, aiop, ch);
+					rp_do_transmit(rp_table[line]);
+				}
+			}
+		}
+	}
+
+	/*
+	 * Reset the timer so we get called at the next clock tick (10ms).
+	 */
+	if (atomic_read(&rp_num_ports_open))
+		mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
+}
+
+/*
+ *  Initializes the r_port structure for a port, as well as enabling the port on 
+ *  the board.  
+ *  Inputs:  board, aiop, chan numbers
+ */
+static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
+{
+	unsigned rocketMode;
+	struct r_port *info;
+	int line;
+	CONTROLLER_T *ctlp;
+
+	/*  Get the next available line number */
+	line = SetLineNumber(board, aiop, chan);
+
+	ctlp = sCtlNumToCtlPtr(board);
+
+	/*  Get a r_port struct for the port, fill it in and save it globally, indexed by line number */
+	info = kmalloc(sizeof (struct r_port), GFP_KERNEL);
+	if (!info) {
+		printk(KERN_INFO "Couldn't allocate info struct for line #%d\n", line);
+		return;
+	}
+	memset(info, 0, sizeof (struct r_port));
+
+	info->magic = RPORT_MAGIC;
+	info->line = line;
+	info->ctlp = ctlp;
+	info->board = board;
+	info->aiop = aiop;
+	info->chan = chan;
+	info->closing_wait = 3000;
+	info->close_delay = 50;
+	init_waitqueue_head(&info->open_wait);
+	init_waitqueue_head(&info->close_wait);
+	info->flags &= ~ROCKET_MODE_MASK;
+	switch (pc104[board][line]) {
+	case 422:
+		info->flags |= ROCKET_MODE_RS422;
+		break;
+	case 485:
+		info->flags |= ROCKET_MODE_RS485;
+		break;
+	case 232:
+	default:
+		info->flags |= ROCKET_MODE_RS232;
+		break;
+	}
+
+	info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
+	if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
+		printk(KERN_INFO "RocketPort sInitChan(%d, %d, %d) failed!\n", board, aiop, chan);
+		kfree(info);
+		return;
+	}
+
+	rocketMode = info->flags & ROCKET_MODE_MASK;
+
+	if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485))
+		sEnRTSToggle(&info->channel);
+	else
+		sDisRTSToggle(&info->channel);
+
+	if (ctlp->boardType == ROCKET_TYPE_PC104) {
+		switch (rocketMode) {
+		case ROCKET_MODE_RS485:
+			sSetInterfaceMode(&info->channel, InterfaceModeRS485);
+			break;
+		case ROCKET_MODE_RS422:
+			sSetInterfaceMode(&info->channel, InterfaceModeRS422);
+			break;
+		case ROCKET_MODE_RS232:
+		default:
+			if (info->flags & ROCKET_RTS_TOGGLE)
+				sSetInterfaceMode(&info->channel, InterfaceModeRS232T);
+			else
+				sSetInterfaceMode(&info->channel, InterfaceModeRS232);
+			break;
+		}
+	}
+	spin_lock_init(&info->slock);
+	sema_init(&info->write_sem, 1);
+	rp_table[line] = info;
+	if (pci_dev)
+		tty_register_device(rocket_driver, line, &pci_dev->dev);
+}
+
+/*
+ *  Configures a rocketport port according to its termio settings.  Called from 
+ *  user mode into the driver (exception handler).  *info CD manipulation is spinlock protected.
+ */
+static void configure_r_port(struct r_port *info,
+			     struct termios *old_termios)
+{
+	unsigned cflag;
+	unsigned long flags;
+	unsigned rocketMode;
+	int bits, baud, divisor;
+	CHANNEL_t *cp;
+
+	if (!info->tty || !info->tty->termios)
+		return;
+	cp = &info->channel;
+	cflag = info->tty->termios->c_cflag;
+
+	/* Byte size and parity */
+	if ((cflag & CSIZE) == CS8) {
+		sSetData8(cp);
+		bits = 10;
+	} else {
+		sSetData7(cp);
+		bits = 9;
+	}
+	if (cflag & CSTOPB) {
+		sSetStop2(cp);
+		bits++;
+	} else {
+		sSetStop1(cp);
+	}
+
+	if (cflag & PARENB) {
+		sEnParity(cp);
+		bits++;
+		if (cflag & PARODD) {
+			sSetOddParity(cp);
+		} else {
+			sSetEvenParity(cp);
+		}
+	} else {
+		sDisParity(cp);
+	}
+
+	/* baud rate */
+	baud = tty_get_baud_rate(info->tty);
+	if (!baud)
+		baud = 9600;
+	divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
+	if ((divisor >= 8192 || divisor < 0) && old_termios) {
+		info->tty->termios->c_cflag &= ~CBAUD;
+		info->tty->termios->c_cflag |=
+		    (old_termios->c_cflag & CBAUD);
+		baud = tty_get_baud_rate(info->tty);
+		if (!baud)
+			baud = 9600;
+		divisor = (rp_baud_base[info->board] / baud) - 1;
+	}
+	if (divisor >= 8192 || divisor < 0) {
+		baud = 9600;
+		divisor = (rp_baud_base[info->board] / baud) - 1;
+	}
+	info->cps = baud / bits;
+	sSetBaud(cp, divisor);
+
+	if (cflag & CRTSCTS) {
+		info->intmask |= DELTA_CTS;
+		sEnCTSFlowCtl(cp);
+	} else {
+		info->intmask &= ~DELTA_CTS;
+		sDisCTSFlowCtl(cp);
+	}
+	if (cflag & CLOCAL) {
+		info->intmask &= ~DELTA_CD;
+	} else {
+		spin_lock_irqsave(&info->slock, flags);
+		if (sGetChanStatus(cp) & CD_ACT)
+			info->cd_status = 1;
+		else
+			info->cd_status = 0;
+		info->intmask |= DELTA_CD;
+		spin_unlock_irqrestore(&info->slock, flags);
+	}
+
+	/*
+	 * Handle software flow control in the board
+	 */
+#ifdef ROCKET_SOFT_FLOW
+	if (I_IXON(info->tty)) {
+		sEnTxSoftFlowCtl(cp);
+		if (I_IXANY(info->tty)) {
+			sEnIXANY(cp);
+		} else {
+			sDisIXANY(cp);
+		}
+		sSetTxXONChar(cp, START_CHAR(info->tty));
+		sSetTxXOFFChar(cp, STOP_CHAR(info->tty));
+	} else {
+		sDisTxSoftFlowCtl(cp);
+		sDisIXANY(cp);
+		sClrTxXOFF(cp);
+	}
+#endif
+
+	/*
+	 * Set up ignore/read mask words
+	 */
+	info->read_status_mask = STMRCVROVRH | 0xFF;
+	if (I_INPCK(info->tty))
+		info->read_status_mask |= STMFRAMEH | STMPARITYH;
+	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+		info->read_status_mask |= STMBREAKH;
+
+	/*
+	 * Characters to ignore
+	 */
+	info->ignore_status_mask = 0;
+	if (I_IGNPAR(info->tty))
+		info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
+	if (I_IGNBRK(info->tty)) {
+		info->ignore_status_mask |= STMBREAKH;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(info->tty))
+			info->ignore_status_mask |= STMRCVROVRH;
+	}
+
+	rocketMode = info->flags & ROCKET_MODE_MASK;
+
+	if ((info->flags & ROCKET_RTS_TOGGLE)
+	    || (rocketMode == ROCKET_MODE_RS485))
+		sEnRTSToggle(cp);
+	else
+		sDisRTSToggle(cp);
+
+	sSetRTS(&info->channel);
+
+	if (cp->CtlP->boardType == ROCKET_TYPE_PC104) {
+		switch (rocketMode) {
+		case ROCKET_MODE_RS485:
+			sSetInterfaceMode(cp, InterfaceModeRS485);
+			break;
+		case ROCKET_MODE_RS422:
+			sSetInterfaceMode(cp, InterfaceModeRS422);
+			break;
+		case ROCKET_MODE_RS232:
+		default:
+			if (info->flags & ROCKET_RTS_TOGGLE)
+				sSetInterfaceMode(cp, InterfaceModeRS232T);
+			else
+				sSetInterfaceMode(cp, InterfaceModeRS232);
+			break;
+		}
+	}
+}
+
+/*  info->count is considered critical, protected by spinlocks.  */
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+			   struct r_port *info)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int retval;
+	int do_clocal = 0, extra_count = 0;
+	unsigned long flags;
+
+	/*
+	 * If the device is in the middle of being closed, then block
+	 * until it's done, and then try again.
+	 */
+	if (tty_hung_up_p(filp))
+		return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
+	if (info->flags & ROCKET_CLOSING) {
+		interruptible_sleep_on(&info->close_wait);
+		return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
+	}
+
+	/*
+	 * If non-blocking mode is set, or the port is not enabled,
+	 * then make the check up front and then exit.
+	 */
+	if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
+		info->flags |= ROCKET_NORMAL_ACTIVE;
+		return 0;
+	}
+	if (tty->termios->c_cflag & CLOCAL)
+		do_clocal = 1;
+
+	/*
+	 * Block waiting for the carrier detect and the line to become free.  While we are in
+	 * this loop, info->count is dropped by one, so that rp_close() knows when to free things.  
+         * We restore it upon exit, either normal or abnormal.
+	 */
+	retval = 0;
+	add_wait_queue(&info->open_wait, &wait);
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->count);
+#endif
+	spin_lock_irqsave(&info->slock, flags);
+
+#ifdef ROCKET_DISABLE_SIMUSAGE
+	info->flags |= ROCKET_NORMAL_ACTIVE;
+#else
+	if (!tty_hung_up_p(filp)) {
+		extra_count = 1;
+		info->count--;
+	}
+#endif
+	info->blocked_open++;
+
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	while (1) {
+		if (tty->termios->c_cflag & CBAUD) {
+			sSetDTR(&info->channel);
+			sSetRTS(&info->channel);
+		}
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (tty_hung_up_p(filp) || !(info->flags & ROCKET_INITIALIZED)) {
+			if (info->flags & ROCKET_HUP_NOTIFY)
+				retval = -EAGAIN;
+			else
+				retval = -ERESTARTSYS;
+			break;
+		}
+		if (!(info->flags & ROCKET_CLOSING) && (do_clocal || (sGetChanStatusLo(&info->channel) & CD_ACT)))
+			break;
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+#ifdef ROCKET_DEBUG_OPEN
+		printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n",
+		     info->line, info->count, info->flags);
+#endif
+		schedule();	/*  Don't hold spinlock here, will hang PC */
+	}
+	current->state = TASK_RUNNING;
+	remove_wait_queue(&info->open_wait, &wait);
+
+	spin_lock_irqsave(&info->slock, flags);
+
+	if (extra_count)
+		info->count++;
+	info->blocked_open--;
+
+	spin_unlock_irqrestore(&info->slock, flags);
+
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n",
+	       info->line, info->count);
+#endif
+	if (retval)
+		return retval;
+	info->flags |= ROCKET_NORMAL_ACTIVE;
+	return 0;
+}
+
+/*
+ *  Exception handler that opens a serial port.  Creates xmit_buf storage, fills in 
+ *  port's r_port struct.  Initializes the port hardware.  
+ */
+static int rp_open(struct tty_struct *tty, struct file *filp)
+{
+	struct r_port *info;
+	int line = 0, retval;
+	CHANNEL_t *cp;
+	unsigned long page;
+
+	line = TTY_GET_LINE(tty);
+	if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL))
+		return -ENXIO;
+
+	page = __get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	if (info->flags & ROCKET_CLOSING) {
+		interruptible_sleep_on(&info->close_wait);
+		free_page(page);
+		return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
+	}
+
+	/*
+	 * We must not sleep from here until the port is marked fully in use.
+	 */
+	if (info->xmit_buf)
+		free_page(page);
+	else
+		info->xmit_buf = (unsigned char *) page;
+
+	tty->driver_data = info;
+	info->tty = tty;
+
+	if (info->count++ == 0) {
+		atomic_inc(&rp_num_ports_open);
+
+#ifdef ROCKET_DEBUG_OPEN
+		printk(KERN_INFO "rocket mod++ = %d...", atomic_read(&rp_num_ports_open));
+#endif
+	}
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->count);
+#endif
+
+	/*
+	 * Info->count is now 1; so it's safe to sleep now.
+	 */
+	info->session = current->signal->session;
+	info->pgrp = process_group(current);
+
+	if ((info->flags & ROCKET_INITIALIZED) == 0) {
+		cp = &info->channel;
+		sSetRxTrigger(cp, TRIG_1);
+		if (sGetChanStatus(cp) & CD_ACT)
+			info->cd_status = 1;
+		else
+			info->cd_status = 0;
+		sDisRxStatusMode(cp);
+		sFlushRxFIFO(cp);
+		sFlushTxFIFO(cp);
+
+		sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
+		sSetRxTrigger(cp, TRIG_1);
+
+		sGetChanStatus(cp);
+		sDisRxStatusMode(cp);
+		sClrTxXOFF(cp);
+
+		sDisCTSFlowCtl(cp);
+		sDisTxSoftFlowCtl(cp);
+
+		sEnRxFIFO(cp);
+		sEnTransmit(cp);
+
+		info->flags |= ROCKET_INITIALIZED;
+
+		/*
+		 * Set up the tty->alt_speed kludge
+		 */
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
+			info->tty->alt_speed = 57600;
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
+			info->tty->alt_speed = 115200;
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
+			info->tty->alt_speed = 230400;
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
+			info->tty->alt_speed = 460800;
+
+		configure_r_port(info, NULL);
+		if (tty->termios->c_cflag & CBAUD) {
+			sSetDTR(cp);
+			sSetRTS(cp);
+		}
+	}
+	/*  Starts (or resets) the maint polling loop */
+	mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
+
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+#ifdef ROCKET_DEBUG_OPEN
+		printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval);
+#endif
+		return retval;
+	}
+	return 0;
+}
+
+/*
+ *  Exception handler that closes a serial port. info->count is considered critical. 
+ */
+static void rp_close(struct tty_struct *tty, struct file *filp)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	unsigned long flags;
+	int timeout;
+	CHANNEL_t *cp;
+	
+	if (rocket_paranoia_check(info, "rp_close"))
+		return;
+
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->count);
+#endif
+
+	if (tty_hung_up_p(filp))
+		return;
+	spin_lock_irqsave(&info->slock, flags);
+
+	if ((tty->count == 1) && (info->count != 1)) {
+		/*
+		 * Uh, oh.  tty->count is 1, which means that the tty
+		 * structure will be freed.  Info->count should always
+		 * be one in these conditions.  If it's greater than
+		 * one, we've got real problems, since it means the
+		 * serial port won't be shutdown.
+		 */
+		printk(KERN_INFO "rp_close: bad serial port count; tty->count is 1, "
+		       "info->count is %d\n", info->count);
+		info->count = 1;
+	}
+	if (--info->count < 0) {
+		printk(KERN_INFO "rp_close: bad serial port count for ttyR%d: %d\n",
+		       info->line, info->count);
+		info->count = 0;
+	}
+	if (info->count) {
+		spin_unlock_irqrestore(&info->slock, flags);
+		return;
+	}
+	info->flags |= ROCKET_CLOSING;
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	cp = &info->channel;
+
+	/*
+	 * Notify the line discpline to only process XON/XOFF characters
+	 */
+	tty->closing = 1;
+
+	/*
+	 * If transmission was throttled by the application request,
+	 * just flush the xmit buffer.
+	 */
+	if (tty->flow_stopped)
+		rp_flush_buffer(tty);
+
+	/*
+	 * Wait for the transmit buffer to clear
+	 */
+	if (info->closing_wait != ROCKET_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, info->closing_wait);
+	/*
+	 * Before we drop DTR, make sure the UART transmitter
+	 * has completely drained; this is especially
+	 * important if there is a transmit FIFO!
+	 */
+	timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps;
+	if (timeout == 0)
+		timeout = 1;
+	rp_wait_until_sent(tty, timeout);
+	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+
+	sDisTransmit(cp);
+	sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
+	sDisCTSFlowCtl(cp);
+	sDisTxSoftFlowCtl(cp);
+	sClrTxXOFF(cp);
+	sFlushRxFIFO(cp);
+	sFlushTxFIFO(cp);
+	sClrRTS(cp);
+	if (C_HUPCL(tty))
+		sClrDTR(cp);
+
+	if (TTY_DRIVER_FLUSH_BUFFER_EXISTS(tty))
+		TTY_DRIVER_FLUSH_BUFFER(tty);
+		
+	tty_ldisc_flush(tty);
+
+	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+
+	if (info->blocked_open) {
+		if (info->close_delay) {
+			msleep_interruptible(jiffies_to_msecs(info->close_delay));
+		}
+		wake_up_interruptible(&info->open_wait);
+	} else {
+		if (info->xmit_buf) {
+			free_page((unsigned long) info->xmit_buf);
+			info->xmit_buf = NULL;
+		}
+	}
+	info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE);
+	tty->closing = 0;
+	wake_up_interruptible(&info->close_wait);
+	atomic_dec(&rp_num_ports_open);
+
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "rocket mod-- = %d...", atomic_read(&rp_num_ports_open));
+	printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line);
+#endif
+
+}
+
+static void rp_set_termios(struct tty_struct *tty,
+			   struct termios *old_termios)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned cflag;
+
+	if (rocket_paranoia_check(info, "rp_set_termios"))
+		return;
+
+	cflag = tty->termios->c_cflag;
+
+	if (cflag == old_termios->c_cflag)
+		return;
+
+	/*
+	 * This driver doesn't support CS5 or CS6
+	 */
+	if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
+		tty->termios->c_cflag =
+		    ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
+
+	configure_r_port(info, old_termios);
+
+	cp = &info->channel;
+
+	/* Handle transition to B0 status */
+	if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
+		sClrDTR(cp);
+		sClrRTS(cp);
+	}
+
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
+		if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
+			sSetRTS(cp);
+		sSetDTR(cp);
+	}
+
+	if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		rp_start(tty);
+	}
+}
+
+static void rp_break(struct tty_struct *tty, int break_state)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	unsigned long flags;
+
+	if (rocket_paranoia_check(info, "rp_break"))
+		return;
+
+	spin_lock_irqsave(&info->slock, flags);
+	if (break_state == -1)
+		sSendBreak(&info->channel);
+	else
+		sClrBreak(&info->channel);
+	spin_unlock_irqrestore(&info->slock, flags);
+}
+
+/*
+ * sGetChanRI used to be a macro in rocket_int.h. When the functionality for
+ * the UPCI boards was added, it was decided to make this a function because
+ * the macro was getting too complicated. All cases except the first one
+ * (UPCIRingInd) are taken directly from the original macro.
+ */
+static int sGetChanRI(CHANNEL_T * ChP)
+{
+	CONTROLLER_t *CtlP = ChP->CtlP;
+	int ChanNum = ChP->ChanNum;
+	int RingInd = 0;
+
+	if (CtlP->UPCIRingInd)
+		RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]);
+	else if (CtlP->AltChanRingIndicator)
+		RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT;
+	else if (CtlP->boardType == ROCKET_TYPE_PC104)
+		RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]);
+
+	return RingInd;
+}
+
+/********************************************************************************************/
+/*  Here are the routines used by rp_ioctl.  These are all called from exception handlers.  */
+
+/*
+ *  Returns the state of the serial modem control lines.  These next 2 functions 
+ *  are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
+ */
+static int rp_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct r_port *info = (struct r_port *)tty->driver_data;
+	unsigned int control, result, ChanStatus;
+
+	ChanStatus = sGetChanStatusLo(&info->channel);
+	control = info->channel.TxControl[3];
+	result = ((control & SET_RTS) ? TIOCM_RTS : 0) | 
+		((control & SET_DTR) ?  TIOCM_DTR : 0) |
+		((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
+		(sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
+		((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) |
+		((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0);
+
+	return result;
+}
+
+/* 
+ *  Sets the modem control lines
+ */
+static int rp_tiocmset(struct tty_struct *tty, struct file *file,
+		    unsigned int set, unsigned int clear)
+{
+	struct r_port *info = (struct r_port *)tty->driver_data;
+
+	if (set & TIOCM_RTS)
+		info->channel.TxControl[3] |= SET_RTS;
+	if (set & TIOCM_DTR)
+		info->channel.TxControl[3] |= SET_DTR;
+	if (clear & TIOCM_RTS)
+		info->channel.TxControl[3] &= ~SET_RTS;
+	if (clear & TIOCM_DTR)
+		info->channel.TxControl[3] &= ~SET_DTR;
+
+	sOutDW(info->channel.IndexAddr, *(DWord_t *) & (info->channel.TxControl[0]));
+	return 0;
+}
+
+static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
+{
+	struct rocket_config tmp;
+
+	if (!retinfo)
+		return -EFAULT;
+	memset(&tmp, 0, sizeof (tmp));
+	tmp.line = info->line;
+	tmp.flags = info->flags;
+	tmp.close_delay = info->close_delay;
+	tmp.closing_wait = info->closing_wait;
+	tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
+
+	if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_config(struct r_port *info, struct rocket_config __user *new_info)
+{
+	struct rocket_config new_serial;
+
+	if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
+		return -EFAULT;
+
+	if (!capable(CAP_SYS_ADMIN))
+	{
+		if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
+			return -EPERM;
+		info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
+		configure_r_port(info, NULL);
+		return 0;
+	}
+
+	info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
+	info->close_delay = new_serial.close_delay;
+	info->closing_wait = new_serial.closing_wait;
+
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
+		info->tty->alt_speed = 57600;
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
+		info->tty->alt_speed = 115200;
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
+		info->tty->alt_speed = 230400;
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
+		info->tty->alt_speed = 460800;
+
+	configure_r_port(info, NULL);
+	return 0;
+}
+
+/*
+ *  This function fills in a rocket_ports struct with information
+ *  about what boards/ports are in the system.  This info is passed
+ *  to user space.  See setrocket.c where the info is used to create
+ *  the /dev/ttyRx ports.
+ */
+static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
+{
+	struct rocket_ports tmp;
+	int board;
+
+	if (!retports)
+		return -EFAULT;
+	memset(&tmp, 0, sizeof (tmp));
+	tmp.tty_major = rocket_driver->major;
+
+	for (board = 0; board < 4; board++) {
+		tmp.rocketModel[board].model = rocketModel[board].model;
+		strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString);
+		tmp.rocketModel[board].numPorts = rocketModel[board].numPorts;
+		tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
+		tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber;
+	}
+	if (copy_to_user(retports, &tmp, sizeof (*retports)))
+		return -EFAULT;
+	return 0;
+}
+
+static int reset_rm2(struct r_port *info, void __user *arg)
+{
+	int reset;
+
+	if (copy_from_user(&reset, arg, sizeof (int)))
+		return -EFAULT;
+	if (reset)
+		reset = 1;
+
+	if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII &&
+            rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII)
+		return -EINVAL;
+
+	if (info->ctlp->BusType == isISA)
+		sModemReset(info->ctlp, info->chan, reset);
+	else
+		sPCIModemReset(info->ctlp, info->chan, reset);
+
+	return 0;
+}
+
+static int get_version(struct r_port *info, struct rocket_version __user *retvers)
+{
+	if (copy_to_user(retvers, &driver_version, sizeof (*retvers)))
+		return -EFAULT;
+	return 0;
+}
+
+/*  IOCTL call handler into the driver */
+static int rp_ioctl(struct tty_struct *tty, struct file *file,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	void __user *argp = (void __user *)arg;
+
+	if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
+		return -ENXIO;
+
+	switch (cmd) {
+	case RCKP_GET_STRUCT:
+		if (copy_to_user(argp, info, sizeof (struct r_port)))
+			return -EFAULT;
+		return 0;
+	case RCKP_GET_CONFIG:
+		return get_config(info, argp);
+	case RCKP_SET_CONFIG:
+		return set_config(info, argp);
+	case RCKP_GET_PORTS:
+		return get_ports(info, argp);
+	case RCKP_RESET_RM2:
+		return reset_rm2(info, argp);
+	case RCKP_GET_VERSION:
+		return get_version(info, argp);
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static void rp_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+
+	if (rocket_paranoia_check(info, "rp_send_xchar"))
+		return;
+
+	cp = &info->channel;
+	if (sGetTxCnt(cp))
+		sWriteTxPrioByte(cp, ch);
+	else
+		sWriteTxByte(sGetTxRxDataIO(cp), ch);
+}
+
+static void rp_throttle(struct tty_struct *tty)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+
+#ifdef ROCKET_DEBUG_THROTTLE
+	printk(KERN_INFO "throttle %s: %d....\n", tty->name,
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	if (rocket_paranoia_check(info, "rp_throttle"))
+		return;
+
+	cp = &info->channel;
+	if (I_IXOFF(tty))
+		rp_send_xchar(tty, STOP_CHAR(tty));
+
+	sClrRTS(&info->channel);
+}
+
+static void rp_unthrottle(struct tty_struct *tty)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+#ifdef ROCKET_DEBUG_THROTTLE
+	printk(KERN_INFO "unthrottle %s: %d....\n", tty->name,
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	if (rocket_paranoia_check(info, "rp_throttle"))
+		return;
+
+	cp = &info->channel;
+	if (I_IXOFF(tty))
+		rp_send_xchar(tty, START_CHAR(tty));
+
+	sSetRTS(&info->channel);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rp_stop() and rp_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rp_stop(struct tty_struct *tty)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+
+#ifdef ROCKET_DEBUG_FLOW
+	printk(KERN_INFO "stop %s: %d %d....\n", tty->name,
+	       info->xmit_cnt, info->xmit_fifo_room);
+#endif
+
+	if (rocket_paranoia_check(info, "rp_stop"))
+		return;
+
+	if (sGetTxCnt(&info->channel))
+		sDisTransmit(&info->channel);
+}
+
+static void rp_start(struct tty_struct *tty)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+
+#ifdef ROCKET_DEBUG_FLOW
+	printk(KERN_INFO "start %s: %d %d....\n", tty->name,
+	       info->xmit_cnt, info->xmit_fifo_room);
+#endif
+
+	if (rocket_paranoia_check(info, "rp_stop"))
+		return;
+
+	sEnTransmit(&info->channel);
+	set_bit((info->aiop * 8) + info->chan,
+		(void *) &xmit_flags[info->board]);
+}
+
+/*
+ * rp_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned long orig_jiffies;
+	int check_time, exit_time;
+	int txcnt;
+
+	if (rocket_paranoia_check(info, "rp_wait_until_sent"))
+		return;
+
+	cp = &info->channel;
+
+	orig_jiffies = jiffies;
+#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
+	printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...", timeout,
+	       jiffies);
+	printk(KERN_INFO "cps=%d...", info->cps);
+#endif
+	while (1) {
+		txcnt = sGetTxCnt(cp);
+		if (!txcnt) {
+			if (sGetChanStatusLo(cp) & TXSHRMT)
+				break;
+			check_time = (HZ / info->cps) / 5;
+		} else {
+			check_time = HZ * txcnt / info->cps;
+		}
+		if (timeout) {
+			exit_time = orig_jiffies + timeout - jiffies;
+			if (exit_time <= 0)
+				break;
+			if (exit_time < check_time)
+				check_time = exit_time;
+		}
+		if (check_time == 0)
+			check_time = 1;
+#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
+		printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...", txcnt, jiffies, check_time);
+#endif
+		msleep_interruptible(jiffies_to_msecs(check_time));
+		if (signal_pending(current))
+			break;
+	}
+	current->state = TASK_RUNNING;
+#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
+	printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
+#endif
+}
+
+/*
+ * rp_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rp_hangup(struct tty_struct *tty)
+{
+	CHANNEL_t *cp;
+	struct r_port *info = (struct r_port *) tty->driver_data;
+
+	if (rocket_paranoia_check(info, "rp_hangup"))
+		return;
+
+#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP))
+	printk(KERN_INFO "rp_hangup of ttyR%d...", info->line);
+#endif
+	rp_flush_buffer(tty);
+	if (info->flags & ROCKET_CLOSING)
+		return;
+	if (info->count) 
+		atomic_dec(&rp_num_ports_open);
+	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+
+	info->count = 0;
+	info->flags &= ~ROCKET_NORMAL_ACTIVE;
+	info->tty = NULL;
+
+	cp = &info->channel;
+	sDisRxFIFO(cp);
+	sDisTransmit(cp);
+	sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
+	sDisCTSFlowCtl(cp);
+	sDisTxSoftFlowCtl(cp);
+	sClrTxXOFF(cp);
+	info->flags &= ~ROCKET_INITIALIZED;
+
+	wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ *  Exception handler - write char routine.  The RocketPort driver uses a
+ *  double-buffering strategy, with the twist that if the in-memory CPU
+ *  buffer is empty, and there's space in the transmit FIFO, the
+ *  writing routines will write directly to transmit FIFO.
+ *  Write buffer and counters protected by spinlocks
+ */
+static void rp_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned long flags;
+
+	if (rocket_paranoia_check(info, "rp_put_char"))
+		return;
+
+	/*  Grab the port write semaphore, locking out other processes that try to write to this port */
+	down(&info->write_sem);
+
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_put_char %c...", ch);
+#endif
+
+	spin_lock_irqsave(&info->slock, flags);
+	cp = &info->channel;
+
+	if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0)
+		info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
+
+	if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
+		info->xmit_buf[info->xmit_head++] = ch;
+		info->xmit_head &= XMIT_BUF_SIZE - 1;
+		info->xmit_cnt++;
+		set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+	} else {
+		sOutB(sGetTxRxDataIO(cp), ch);
+		info->xmit_fifo_room--;
+	}
+	spin_unlock_irqrestore(&info->slock, flags);
+	up(&info->write_sem);
+}
+
+/*
+ *  Exception handler - write routine, called when user app writes to the device.
+ *  A per port write semaphore is used to protect from another process writing to
+ *  this port at the same time.  This other process could be running on the other CPU
+ *  or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out). 
+ *  Spinlocks protect the info xmit members.
+ */
+static int rp_write(struct tty_struct *tty,
+		    const unsigned char *buf, int count)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+	const unsigned char *b;
+	int c, retval = 0;
+	unsigned long flags;
+
+	if (count <= 0 || rocket_paranoia_check(info, "rp_write"))
+		return 0;
+
+	down_interruptible(&info->write_sem);
+
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_write %d chars...", count);
+#endif
+	cp = &info->channel;
+
+	if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count)
+		info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
+
+        /*
+	 *  If the write queue for the port is empty, and there is FIFO space, stuff bytes 
+	 *  into FIFO.  Use the write queue for temp storage.
+         */
+	if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
+		c = min(count, info->xmit_fifo_room);
+		b = buf;
+
+		/*  Push data into FIFO, 2 bytes at a time */
+		sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
+
+		/*  If there is a byte remaining, write it */
+		if (c & 1)
+			sOutB(sGetTxRxDataIO(cp), b[c - 1]);
+
+		retval += c;
+		buf += c;
+		count -= c;
+
+		spin_lock_irqsave(&info->slock, flags);
+		info->xmit_fifo_room -= c;
+		spin_unlock_irqrestore(&info->slock, flags);
+	}
+
+	/* If count is zero, we wrote it all and are done */
+	if (!count)
+		goto end;
+
+	/*  Write remaining data into the port's xmit_buf */
+	while (1) {
+		if (info->tty == 0)	/*   Seemingly obligatory check... */
+			goto end;
+
+		c = min(count, min(XMIT_BUF_SIZE - info->xmit_cnt - 1, XMIT_BUF_SIZE - info->xmit_head));
+		if (c <= 0)
+			break;
+
+		b = buf;
+		memcpy(info->xmit_buf + info->xmit_head, b, c);
+
+		spin_lock_irqsave(&info->slock, flags);
+		info->xmit_head =
+		    (info->xmit_head + c) & (XMIT_BUF_SIZE - 1);
+		info->xmit_cnt += c;
+		spin_unlock_irqrestore(&info->slock, flags);
+
+		buf += c;
+		count -= c;
+		retval += c;
+	}
+
+	if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
+		set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+	
+end:
+ 	if (info->xmit_cnt < WAKEUP_CHARS) {
+ 		tty_wakeup(tty);
+		wake_up_interruptible(&tty->write_wait);
+#ifdef ROCKETPORT_HAVE_POLL_WAIT
+		wake_up_interruptible(&tty->poll_wait);
+#endif
+	}
+	up(&info->write_sem);
+	return retval;
+}
+
+/*
+ * Return the number of characters that can be sent.  We estimate
+ * only using the in-memory transmit buffer only, and ignore the
+ * potential space in the transmit FIFO.
+ */
+static int rp_write_room(struct tty_struct *tty)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	int ret;
+
+	if (rocket_paranoia_check(info, "rp_write_room"))
+		return 0;
+
+	ret = XMIT_BUF_SIZE - info->xmit_cnt - 1;
+	if (ret < 0)
+		ret = 0;
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_write_room returns %d...", ret);
+#endif
+	return ret;
+}
+
+/*
+ * Return the number of characters in the buffer.  Again, this only
+ * counts those characters in the in-memory transmit buffer.
+ */
+static int rp_chars_in_buffer(struct tty_struct *tty)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+
+	if (rocket_paranoia_check(info, "rp_chars_in_buffer"))
+		return 0;
+
+	cp = &info->channel;
+
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_chars_in_buffer returns %d...", info->xmit_cnt);
+#endif
+	return info->xmit_cnt;
+}
+
+/*
+ *  Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the
+ *  r_port struct for the port.  Note that spinlock are used to protect info members,
+ *  do not call this function if the spinlock is already held.
+ */
+static void rp_flush_buffer(struct tty_struct *tty)
+{
+	struct r_port *info = (struct r_port *) tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned long flags;
+
+	if (rocket_paranoia_check(info, "rp_flush_buffer"))
+		return;
+
+	spin_lock_irqsave(&info->slock, flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	wake_up_interruptible(&tty->write_wait);
+#ifdef ROCKETPORT_HAVE_POLL_WAIT
+	wake_up_interruptible(&tty->poll_wait);
+#endif
+	tty_wakeup(tty);
+
+	cp = &info->channel;
+	sFlushTxFIFO(cp);
+}
+
+#ifdef CONFIG_PCI
+
+/*
+ *  Called when a PCI card is found.  Retrieves and stores model information,
+ *  init's aiopic and serial port hardware.
+ *  Inputs:  i is the board number (0-n)
+ */
+__init int register_PCI(int i, struct pci_dev *dev)
+{
+	int num_aiops, aiop, max_num_aiops, num_chan, chan;
+	unsigned int aiopio[MAX_AIOPS_PER_BOARD];
+	char *str, *board_type;
+	CONTROLLER_t *ctlp;
+
+	int fast_clock = 0;
+	int altChanRingIndicator = 0;
+	int ports_per_aiop = 8;
+	int ret;
+	unsigned int class_rev;
+	WordIO_t ConfigIO = 0;
+	ByteIO_t UPCIRingInd = 0;
+
+	if (!dev || pci_enable_device(dev))
+		return 0;
+
+	rcktpt_io_addr[i] = pci_resource_start(dev, 0);
+	ret = pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
+
+	if (ret) {
+		printk(KERN_INFO "  Error during register_PCI(), unable to read config dword \n");
+		return 0;
+	}
+
+	rcktpt_type[i] = ROCKET_TYPE_NORMAL;
+	rocketModel[i].loadrm2 = 0;
+	rocketModel[i].startingPortNumber = nextLineNumber;
+
+	/*  Depending on the model, set up some config variables */
+	switch (dev->device) {
+	case PCI_DEVICE_ID_RP4QUAD:
+		str = "Quadcable";
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		rocketModel[i].model = MODEL_RP4QUAD;
+		strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable");
+		rocketModel[i].numPorts = 4;
+		break;
+	case PCI_DEVICE_ID_RP8OCTA:
+		str = "Octacable";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8OCTA;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_URP8OCTA:
+		str = "Octacable";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RP8OCTA;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP8INTF:
+		str = "8";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_URP8INTF:
+		str = "8";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RP8INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP8J:
+		str = "8J";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8J;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP4J:
+		str = "4J";
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		rocketModel[i].model = MODEL_RP4J;
+		strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors");
+		rocketModel[i].numPorts = 4;
+		break;
+	case PCI_DEVICE_ID_RP8SNI:
+		str = "8 (DB78 Custom)";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8SNI;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP16SNI:
+		str = "16 (DB78 Custom)";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_RP16SNI;
+		strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_RP16INTF:
+		str = "16";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_RP16INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_URP16INTF:
+		str = "16";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_UPCI_RP16INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_CRP16INTF:
+		str = "16";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_CPCI_RP16INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_RP32INTF:
+		str = "32";
+		max_num_aiops = 4;
+		rocketModel[i].model = MODEL_RP32INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F");
+		rocketModel[i].numPorts = 32;
+		break;
+	case PCI_DEVICE_ID_URP32INTF:
+		str = "32";
+		max_num_aiops = 4;
+		rocketModel[i].model = MODEL_UPCI_RP32INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F");
+		rocketModel[i].numPorts = 32;
+		break;
+	case PCI_DEVICE_ID_RPP4:
+		str = "Plus Quadcable";
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RPP4;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port");
+		rocketModel[i].numPorts = 4;
+		break;
+	case PCI_DEVICE_ID_RPP8:
+		str = "Plus Octacable";
+		max_num_aiops = 2;
+		ports_per_aiop = 4;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RPP8;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP2_232:
+		str = "Plus 2 (RS-232)";
+		max_num_aiops = 1;
+		ports_per_aiop = 2;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RP2_232;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232");
+		rocketModel[i].numPorts = 2;
+		break;
+	case PCI_DEVICE_ID_RP2_422:
+		str = "Plus 2 (RS-422)";
+		max_num_aiops = 1;
+		ports_per_aiop = 2;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RP2_422;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422");
+		rocketModel[i].numPorts = 2;
+		break;
+	case PCI_DEVICE_ID_RP6M:
+
+		max_num_aiops = 1;
+		ports_per_aiop = 6;
+		str = "6-port";
+
+		/*  If class_rev is 1, the rocketmodem flash must be loaded.  If it is 2 it is a "socketed" version. */
+		if ((class_rev & 0xFF) == 1) {
+			rcktpt_type[i] = ROCKET_TYPE_MODEMII;
+			rocketModel[i].loadrm2 = 1;
+		} else {
+			rcktpt_type[i] = ROCKET_TYPE_MODEM;
+		}
+
+		rocketModel[i].model = MODEL_RP6M;
+		strcpy(rocketModel[i].modelString, "RocketModem 6 port");
+		rocketModel[i].numPorts = 6;
+		break;
+	case PCI_DEVICE_ID_RP4M:
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		str = "4-port";
+		if ((class_rev & 0xFF) == 1) {
+			rcktpt_type[i] = ROCKET_TYPE_MODEMII;
+			rocketModel[i].loadrm2 = 1;
+		} else {
+			rcktpt_type[i] = ROCKET_TYPE_MODEM;
+		}
+
+		rocketModel[i].model = MODEL_RP4M;
+		strcpy(rocketModel[i].modelString, "RocketModem 4 port");
+		rocketModel[i].numPorts = 4;
+		break;
+	default:
+		str = "(unknown/unsupported)";
+		max_num_aiops = 0;
+		break;
+	}
+
+	/*
+	 * Check for UPCI boards.
+	 */
+
+	switch (dev->device) {
+	case PCI_DEVICE_ID_URP32INTF:
+	case PCI_DEVICE_ID_URP8INTF:
+	case PCI_DEVICE_ID_URP16INTF:
+	case PCI_DEVICE_ID_CRP16INTF:
+	case PCI_DEVICE_ID_URP8OCTA:
+		rcktpt_io_addr[i] = pci_resource_start(dev, 2);
+		ConfigIO = pci_resource_start(dev, 1);
+		if (dev->device == PCI_DEVICE_ID_URP8OCTA) {
+			UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
+
+			/*
+			 * Check for octa or quad cable.
+			 */
+			if (!
+			    (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) &
+			     PCI_GPIO_CTRL_8PORT)) {
+				str = "Quadcable";
+				ports_per_aiop = 4;
+				rocketModel[i].numPorts = 4;
+			}
+		}
+		break;
+	case PCI_DEVICE_ID_UPCI_RM3_8PORT:
+		str = "8 ports";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RM3_8PORT;
+		strcpy(rocketModel[i].modelString, "RocketModem III 8 port");
+		rocketModel[i].numPorts = 8;
+		rcktpt_io_addr[i] = pci_resource_start(dev, 2);
+		UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
+		ConfigIO = pci_resource_start(dev, 1);
+		rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
+		break;
+	case PCI_DEVICE_ID_UPCI_RM3_4PORT:
+		str = "4 ports";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RM3_4PORT;
+		strcpy(rocketModel[i].modelString, "RocketModem III 4 port");
+		rocketModel[i].numPorts = 4;
+		rcktpt_io_addr[i] = pci_resource_start(dev, 2);
+		UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
+		ConfigIO = pci_resource_start(dev, 1);
+		rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
+		break;
+	default:
+		break;
+	}
+
+	switch (rcktpt_type[i]) {
+	case ROCKET_TYPE_MODEM:
+		board_type = "RocketModem";
+		break;
+	case ROCKET_TYPE_MODEMII:
+		board_type = "RocketModem II";
+		break;
+	case ROCKET_TYPE_MODEMIII:
+		board_type = "RocketModem III";
+		break;
+	default:
+		board_type = "RocketPort";
+		break;
+	}
+
+	if (fast_clock) {
+		sClockPrescale = 0x12;	/* mod 2 (divide by 3) */
+		rp_baud_base[i] = 921600;
+	} else {
+		/*
+		 * If support_low_speed is set, use the slow clock
+		 * prescale, which supports 50 bps
+		 */
+		if (support_low_speed) {
+			/* mod 9 (divide by 10) prescale */
+			sClockPrescale = 0x19;
+			rp_baud_base[i] = 230400;
+		} else {
+			/* mod 4 (devide by 5) prescale */
+			sClockPrescale = 0x14;
+			rp_baud_base[i] = 460800;
+		}
+	}
+
+	for (aiop = 0; aiop < max_num_aiops; aiop++)
+		aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40);
+	ctlp = sCtlNumToCtlPtr(i);
+	num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd);
+	for (aiop = 0; aiop < max_num_aiops; aiop++)
+		ctlp->AiopNumChan[aiop] = ports_per_aiop;
+
+	printk("Comtrol PCI controller #%d ID 0x%x found in bus:slot:fn %s at address %04lx, "
+	     "%d AIOP(s) (%s)\n", i, dev->device, pci_name(dev),
+	     rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString);
+	printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
+	       rocketModel[i].modelString,
+	       rocketModel[i].startingPortNumber,
+	       rocketModel[i].startingPortNumber +
+	       rocketModel[i].numPorts - 1);
+
+	if (num_aiops <= 0) {
+		rcktpt_io_addr[i] = 0;
+		return (0);
+	}
+	is_PCI[i] = 1;
+
+	/*  Reset the AIOPIC, init the serial ports */
+	for (aiop = 0; aiop < num_aiops; aiop++) {
+		sResetAiopByNum(ctlp, aiop);
+		num_chan = ports_per_aiop;
+		for (chan = 0; chan < num_chan; chan++)
+			init_r_port(i, aiop, chan, dev);
+	}
+
+	/*  Rocket modems must be reset */
+	if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
+	    (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
+	    (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
+		num_chan = ports_per_aiop;
+		for (chan = 0; chan < num_chan; chan++)
+			sPCIModemReset(ctlp, chan, 1);
+		mdelay(500);
+		for (chan = 0; chan < num_chan; chan++)
+			sPCIModemReset(ctlp, chan, 0);
+		mdelay(500);
+		rmSpeakerReset(ctlp, rocketModel[i].model);
+	}
+	return (1);
+}
+
+/*
+ *  Probes for PCI cards, inits them if found
+ *  Input:   board_found = number of ISA boards already found, or the
+ *           starting board number
+ *  Returns: Number of PCI boards found
+ */
+static int __init init_PCI(int boards_found)
+{
+	struct pci_dev *dev = NULL;
+	int count = 0;
+
+	/*  Work through the PCI device list, pulling out ours */
+	while ((dev = pci_find_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
+		if (register_PCI(count + boards_found, dev))
+			count++;
+	}
+	return (count);
+}
+
+#endif				/* CONFIG_PCI */
+
+/*
+ *  Probes for ISA cards
+ *  Input:   i = the board number to look for
+ *  Returns: 1 if board found, 0 else
+ */
+static int __init init_ISA(int i)
+{
+	int num_aiops, num_chan = 0, total_num_chan = 0;
+	int aiop, chan;
+	unsigned int aiopio[MAX_AIOPS_PER_BOARD];
+	CONTROLLER_t *ctlp;
+	char *type_string;
+
+	/*  If io_addr is zero, no board configured */
+	if (rcktpt_io_addr[i] == 0)
+		return (0);
+
+	/*  Reserve the IO region */
+	if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
+		printk(KERN_INFO "Unable to reserve IO region for configured ISA RocketPort at address 0x%lx, board not installed...\n", rcktpt_io_addr[i]);
+		rcktpt_io_addr[i] = 0;
+		return (0);
+	}
+
+	ctlp = sCtlNumToCtlPtr(i);
+
+	ctlp->boardType = rcktpt_type[i];
+
+	switch (rcktpt_type[i]) {
+	case ROCKET_TYPE_PC104:
+		type_string = "(PC104)";
+		break;
+	case ROCKET_TYPE_MODEM:
+		type_string = "(RocketModem)";
+		break;
+	case ROCKET_TYPE_MODEMII:
+		type_string = "(RocketModem II)";
+		break;
+	default:
+		type_string = "";
+		break;
+	}
+
+	/*
+	 * If support_low_speed is set, use the slow clock prescale,
+	 * which supports 50 bps
+	 */
+	if (support_low_speed) {
+		sClockPrescale = 0x19;	/* mod 9 (divide by 10) prescale */
+		rp_baud_base[i] = 230400;
+	} else {
+		sClockPrescale = 0x14;	/* mod 4 (devide by 5) prescale */
+		rp_baud_base[i] = 460800;
+	}
+
+	for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
+		aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
+
+	num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio,  MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
+
+	if (ctlp->boardType == ROCKET_TYPE_PC104) {
+		sEnAiop(ctlp, 2);	/* only one AIOPIC, but these */
+		sEnAiop(ctlp, 3);	/* CSels used for other stuff */
+	}
+
+	/*  If something went wrong initing the AIOP's release the ISA IO memory */
+	if (num_aiops <= 0) {
+		release_region(rcktpt_io_addr[i], 64);
+		rcktpt_io_addr[i] = 0;
+		return (0);
+	}
+  
+	rocketModel[i].startingPortNumber = nextLineNumber;
+
+	for (aiop = 0; aiop < num_aiops; aiop++) {
+		sResetAiopByNum(ctlp, aiop);
+		sEnAiop(ctlp, aiop);
+		num_chan = sGetAiopNumChan(ctlp, aiop);
+		total_num_chan += num_chan;
+		for (chan = 0; chan < num_chan; chan++)
+			init_r_port(i, aiop, chan, NULL);
+	}
+	is_PCI[i] = 0;
+	if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) {
+		num_chan = sGetAiopNumChan(ctlp, 0);
+		total_num_chan = num_chan;
+		for (chan = 0; chan < num_chan; chan++)
+			sModemReset(ctlp, chan, 1);
+		mdelay(500);
+		for (chan = 0; chan < num_chan; chan++)
+			sModemReset(ctlp, chan, 0);
+		mdelay(500);
+		strcpy(rocketModel[i].modelString, "RocketModem ISA");
+	} else {
+		strcpy(rocketModel[i].modelString, "RocketPort ISA");
+	}
+	rocketModel[i].numPorts = total_num_chan;
+	rocketModel[i].model = MODEL_ISA;
+
+	printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", 
+	       i, rcktpt_io_addr[i], num_aiops, type_string);
+
+	printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
+	       rocketModel[i].modelString,
+	       rocketModel[i].startingPortNumber,
+	       rocketModel[i].startingPortNumber +
+	       rocketModel[i].numPorts - 1);
+
+	return (1);
+}
+
+static struct tty_operations rocket_ops = {
+	.open = rp_open,
+	.close = rp_close,
+	.write = rp_write,
+	.put_char = rp_put_char,
+	.write_room = rp_write_room,
+	.chars_in_buffer = rp_chars_in_buffer,
+	.flush_buffer = rp_flush_buffer,
+	.ioctl = rp_ioctl,
+	.throttle = rp_throttle,
+	.unthrottle = rp_unthrottle,
+	.set_termios = rp_set_termios,
+	.stop = rp_stop,
+	.start = rp_start,
+	.hangup = rp_hangup,
+	.break_ctl = rp_break,
+	.send_xchar = rp_send_xchar,
+	.wait_until_sent = rp_wait_until_sent,
+	.tiocmget = rp_tiocmget,
+	.tiocmset = rp_tiocmset,
+};
+
+/*
+ * The module "startup" routine; it's run when the module is loaded.
+ */
+int __init rp_init(void)
+{
+	int retval, pci_boards_found, isa_boards_found, i;
+
+	printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
+	       ROCKET_VERSION, ROCKET_DATE);
+
+	rocket_driver = alloc_tty_driver(MAX_RP_PORTS);
+	if (!rocket_driver)
+		return -ENOMEM;
+
+	/*
+	 * Set up the timer channel.
+	 */
+	init_timer(&rocket_timer);
+	rocket_timer.function = rp_do_poll;
+
+	/*
+	 * Initialize the array of pointers to our own internal state
+	 * structures.
+	 */
+	memset(rp_table, 0, sizeof (rp_table));
+	memset(xmit_flags, 0, sizeof (xmit_flags));
+
+	for (i = 0; i < MAX_RP_PORTS; i++)
+		lineNumbers[i] = 0;
+	nextLineNumber = 0;
+	memset(rocketModel, 0, sizeof (rocketModel));
+
+	/*
+	 *  If board 1 is non-zero, there is at least one ISA configured.  If controller is 
+	 *  zero, use the default controller IO address of board1 + 0x40.
+	 */
+	if (board1) {
+		if (controller == 0)
+			controller = board1 + 0x40;
+	} else {
+		controller = 0;  /*  Used as a flag, meaning no ISA boards */
+	}
+
+	/*  If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
+	if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
+		printk(KERN_INFO "Unable to reserve IO region for first configured ISA RocketPort controller 0x%lx.  Driver exiting \n", controller);
+		return -EBUSY;
+	}
+
+	/*  Store ISA variable retrieved from command line or .conf file. */
+	rcktpt_io_addr[0] = board1;
+	rcktpt_io_addr[1] = board2;
+	rcktpt_io_addr[2] = board3;
+	rcktpt_io_addr[3] = board4;
+
+	rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0];
+	rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1];
+	rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2];
+	rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3];
+
+	/*
+	 * Set up the tty driver structure and then register this
+	 * driver with the tty layer.
+	 */
+
+	rocket_driver->owner = THIS_MODULE;
+	rocket_driver->flags = TTY_DRIVER_NO_DEVFS;
+	rocket_driver->devfs_name = "tts/R";
+	rocket_driver->name = "ttyR";
+	rocket_driver->driver_name = "Comtrol RocketPort";
+	rocket_driver->major = TTY_ROCKET_MAJOR;
+	rocket_driver->minor_start = 0;
+	rocket_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	rocket_driver->subtype = SERIAL_TYPE_NORMAL;
+	rocket_driver->init_termios = tty_std_termios;
+	rocket_driver->init_termios.c_cflag =
+	    B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+#ifdef ROCKET_SOFT_FLOW
+	rocket_driver->flags |= TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+#endif
+	tty_set_operations(rocket_driver, &rocket_ops);
+
+	retval = tty_register_driver(rocket_driver);
+	if (retval < 0) {
+		printk(KERN_INFO "Couldn't install tty RocketPort driver (error %d)\n", -retval);
+		put_tty_driver(rocket_driver);
+		return -1;
+	}
+
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major);
+#endif
+
+	/*
+	 *  OK, let's probe each of the controllers looking for boards.  Any boards found
+         *  will be initialized here.
+	 */
+	isa_boards_found = 0;
+	pci_boards_found = 0;
+
+	for (i = 0; i < NUM_BOARDS; i++) {
+		if (init_ISA(i))
+			isa_boards_found++;
+	}
+
+#ifdef CONFIG_PCI
+	if (isa_boards_found < NUM_BOARDS)
+		pci_boards_found = init_PCI(isa_boards_found);
+#endif
+
+	max_board = pci_boards_found + isa_boards_found;
+
+	if (max_board == 0) {
+		printk(KERN_INFO "No rocketport ports found; unloading driver.\n");
+		del_timer_sync(&rocket_timer);
+		tty_unregister_driver(rocket_driver);
+		put_tty_driver(rocket_driver);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+#ifdef MODULE
+
+static void rp_cleanup_module(void)
+{
+	int retval;
+	int i;
+
+	del_timer_sync(&rocket_timer);
+
+	retval = tty_unregister_driver(rocket_driver);
+	if (retval)
+		printk(KERN_INFO "Error %d while trying to unregister "
+		       "rocketport driver\n", -retval);
+	put_tty_driver(rocket_driver);
+
+	for (i = 0; i < MAX_RP_PORTS; i++) {
+		if (rp_table[i])
+			kfree(rp_table[i]);
+	}
+
+	for (i = 0; i < NUM_BOARDS; i++) {
+		if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
+			continue;
+		release_region(rcktpt_io_addr[i], 64);
+	}
+	if (controller)
+		release_region(controller, 4);
+}
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+static Byte_t RData[RDATASIZE] = {
+	0x00, 0x09, 0xf6, 0x82,
+	0x02, 0x09, 0x86, 0xfb,
+	0x04, 0x09, 0x00, 0x0a,
+	0x06, 0x09, 0x01, 0x0a,
+	0x08, 0x09, 0x8a, 0x13,
+	0x0a, 0x09, 0xc5, 0x11,
+	0x0c, 0x09, 0x86, 0x85,
+	0x0e, 0x09, 0x20, 0x0a,
+	0x10, 0x09, 0x21, 0x0a,
+	0x12, 0x09, 0x41, 0xff,
+	0x14, 0x09, 0x82, 0x00,
+	0x16, 0x09, 0x82, 0x7b,
+	0x18, 0x09, 0x8a, 0x7d,
+	0x1a, 0x09, 0x88, 0x81,
+	0x1c, 0x09, 0x86, 0x7a,
+	0x1e, 0x09, 0x84, 0x81,
+	0x20, 0x09, 0x82, 0x7c,
+	0x22, 0x09, 0x0a, 0x0a
+};
+
+static Byte_t RRegData[RREGDATASIZE] = {
+	0x00, 0x09, 0xf6, 0x82,	/* 00: Stop Rx processor */
+	0x08, 0x09, 0x8a, 0x13,	/* 04: Tx software flow control */
+	0x0a, 0x09, 0xc5, 0x11,	/* 08: XON char */
+	0x0c, 0x09, 0x86, 0x85,	/* 0c: XANY */
+	0x12, 0x09, 0x41, 0xff,	/* 10: Rx mask char */
+	0x14, 0x09, 0x82, 0x00,	/* 14: Compare/Ignore #0 */
+	0x16, 0x09, 0x82, 0x7b,	/* 18: Compare #1 */
+	0x18, 0x09, 0x8a, 0x7d,	/* 1c: Compare #2 */
+	0x1a, 0x09, 0x88, 0x81,	/* 20: Interrupt #1 */
+	0x1c, 0x09, 0x86, 0x7a,	/* 24: Ignore/Replace #1 */
+	0x1e, 0x09, 0x84, 0x81,	/* 28: Interrupt #2 */
+	0x20, 0x09, 0x82, 0x7c,	/* 2c: Ignore/Replace #2 */
+	0x22, 0x09, 0x0a, 0x0a	/* 30: Rx FIFO Enable */
+};
+
+CONTROLLER_T sController[CTL_SIZE] = {
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}
+};
+
+Byte_t sBitMapClrTbl[8] = {
+	0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f
+};
+
+Byte_t sBitMapSetTbl[8] = {
+	0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80
+};
+
+int sClockPrescale = 0x14;
+
+/***************************************************************************
+Function: sInitController
+Purpose:  Initialization of controller global registers and controller
+          structure.
+Call:     sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
+                          IRQNum,Frequency,PeriodicOnly)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int CtlNum; Controller number
+          ByteIO_t MudbacIO; Mudbac base I/O address.
+          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+             This list must be in the order the AIOPs will be found on the
+             controller.  Once an AIOP in the list is not found, it is
+             assumed that there are no more AIOPs on the controller.
+          int AiopIOListSize; Number of addresses in AiopIOList
+          int IRQNum; Interrupt Request number.  Can be any of the following:
+                         0: Disable global interrupts
+                         3: IRQ 3
+                         4: IRQ 4
+                         5: IRQ 5
+                         9: IRQ 9
+                         10: IRQ 10
+                         11: IRQ 11
+                         12: IRQ 12
+                         15: IRQ 15
+          Byte_t Frequency: A flag identifying the frequency
+                   of the periodic interrupt, can be any one of the following:
+                      FREQ_DIS - periodic interrupt disabled
+                      FREQ_137HZ - 137 Hertz
+                      FREQ_69HZ - 69 Hertz
+                      FREQ_34HZ - 34 Hertz
+                      FREQ_17HZ - 17 Hertz
+                      FREQ_9HZ - 9 Hertz
+                      FREQ_4HZ - 4 Hertz
+                   If IRQNum is set to 0 the Frequency parameter is
+                   overidden, it is forced to a value of FREQ_DIS.
+          int PeriodicOnly: TRUE if all interrupts except the periodic
+                               interrupt are to be blocked.
+                            FALSE is both the periodic interrupt and
+                               other channel interrupts are allowed.
+                            If IRQNum is set to 0 the PeriodicOnly parameter is
+                               overidden, it is forced to a value of FALSE.
+Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
+               initialization failed.
+
+Comments:
+          If periodic interrupts are to be disabled but AIOP interrupts
+          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to FALSE.
+
+          If interrupts are to be completely disabled set IRQNum to 0.
+
+          Setting Frequency to FREQ_DIS and PeriodicOnly to TRUE is an
+          invalid combination.
+
+          This function performs initialization of global interrupt modes,
+          but it does not actually enable global interrupts.  To enable
+          and disable global interrupts use functions sEnGlobalInt() and
+          sDisGlobalInt().  Enabling of global interrupts is normally not
+          done until all other initializations are complete.
+
+          Even if interrupts are globally enabled, they must also be
+          individually enabled for each channel that is to generate
+          interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+
+          After this function all AIOPs on the controller are disabled,
+          they can be enabled with sEnAiop().
+*/
+int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
+		    ByteIO_t * AiopIOList, int AiopIOListSize, int IRQNum,
+		    Byte_t Frequency, int PeriodicOnly)
+{
+	int i;
+	ByteIO_t io;
+	int done;
+
+	CtlP->AiopIntrBits = aiop_intr_bits;
+	CtlP->AltChanRingIndicator = 0;
+	CtlP->CtlNum = CtlNum;
+	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
+	CtlP->BusType = isISA;
+	CtlP->MBaseIO = MudbacIO;
+	CtlP->MReg1IO = MudbacIO + 1;
+	CtlP->MReg2IO = MudbacIO + 2;
+	CtlP->MReg3IO = MudbacIO + 3;
+#if 1
+	CtlP->MReg2 = 0;	/* interrupt disable */
+	CtlP->MReg3 = 0;	/* no periodic interrupts */
+#else
+	if (sIRQMap[IRQNum] == 0) {	/* interrupts globally disabled */
+		CtlP->MReg2 = 0;	/* interrupt disable */
+		CtlP->MReg3 = 0;	/* no periodic interrupts */
+	} else {
+		CtlP->MReg2 = sIRQMap[IRQNum];	/* set IRQ number */
+		CtlP->MReg3 = Frequency;	/* set frequency */
+		if (PeriodicOnly) {	/* periodic interrupt only */
+			CtlP->MReg3 |= PERIODIC_ONLY;
+		}
+	}
+#endif
+	sOutB(CtlP->MReg2IO, CtlP->MReg2);
+	sOutB(CtlP->MReg3IO, CtlP->MReg3);
+	sControllerEOI(CtlP);	/* clear EOI if warm init */
+	/* Init AIOPs */
+	CtlP->NumAiop = 0;
+	for (i = done = 0; i < AiopIOListSize; i++) {
+		io = AiopIOList[i];
+		CtlP->AiopIO[i] = (WordIO_t) io;
+		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+		sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03));	/* AIOP index */
+		sOutB(MudbacIO, (Byte_t) (io >> 6));	/* set up AIOP I/O in MUDBAC */
+		if (done)
+			continue;
+		sEnAiop(CtlP, i);	/* enable the AIOP */
+		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
+		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
+			done = 1;	/* done looking for AIOPs */
+		else {
+			CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
+			sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
+			sOutB(io + _INDX_DATA, sClockPrescale);
+			CtlP->NumAiop++;	/* bump count of AIOPs */
+		}
+		sDisAiop(CtlP, i);	/* disable AIOP */
+	}
+
+	if (CtlP->NumAiop == 0)
+		return (-1);
+	else
+		return (CtlP->NumAiop);
+}
+
+/***************************************************************************
+Function: sPCIInitController
+Purpose:  Initialization of controller global registers and controller
+          structure.
+Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
+                          IRQNum,Frequency,PeriodicOnly)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int CtlNum; Controller number
+          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+             This list must be in the order the AIOPs will be found on the
+             controller.  Once an AIOP in the list is not found, it is
+             assumed that there are no more AIOPs on the controller.
+          int AiopIOListSize; Number of addresses in AiopIOList
+          int IRQNum; Interrupt Request number.  Can be any of the following:
+                         0: Disable global interrupts
+                         3: IRQ 3
+                         4: IRQ 4
+                         5: IRQ 5
+                         9: IRQ 9
+                         10: IRQ 10
+                         11: IRQ 11
+                         12: IRQ 12
+                         15: IRQ 15
+          Byte_t Frequency: A flag identifying the frequency
+                   of the periodic interrupt, can be any one of the following:
+                      FREQ_DIS - periodic interrupt disabled
+                      FREQ_137HZ - 137 Hertz
+                      FREQ_69HZ - 69 Hertz
+                      FREQ_34HZ - 34 Hertz
+                      FREQ_17HZ - 17 Hertz
+                      FREQ_9HZ - 9 Hertz
+                      FREQ_4HZ - 4 Hertz
+                   If IRQNum is set to 0 the Frequency parameter is
+                   overidden, it is forced to a value of FREQ_DIS.
+          int PeriodicOnly: TRUE if all interrupts except the periodic
+                               interrupt are to be blocked.
+                            FALSE is both the periodic interrupt and
+                               other channel interrupts are allowed.
+                            If IRQNum is set to 0 the PeriodicOnly parameter is
+                               overidden, it is forced to a value of FALSE.
+Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
+               initialization failed.
+
+Comments:
+          If periodic interrupts are to be disabled but AIOP interrupts
+          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to FALSE.
+
+          If interrupts are to be completely disabled set IRQNum to 0.
+
+          Setting Frequency to FREQ_DIS and PeriodicOnly to TRUE is an
+          invalid combination.
+
+          This function performs initialization of global interrupt modes,
+          but it does not actually enable global interrupts.  To enable
+          and disable global interrupts use functions sEnGlobalInt() and
+          sDisGlobalInt().  Enabling of global interrupts is normally not
+          done until all other initializations are complete.
+
+          Even if interrupts are globally enabled, they must also be
+          individually enabled for each channel that is to generate
+          interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+
+          After this function all AIOPs on the controller are disabled,
+          they can be enabled with sEnAiop().
+*/
+int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
+		       ByteIO_t * AiopIOList, int AiopIOListSize,
+		       WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
+		       int PeriodicOnly, int altChanRingIndicator,
+		       int UPCIRingInd)
+{
+	int i;
+	ByteIO_t io;
+
+	CtlP->AltChanRingIndicator = altChanRingIndicator;
+	CtlP->UPCIRingInd = UPCIRingInd;
+	CtlP->CtlNum = CtlNum;
+	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
+	CtlP->BusType = isPCI;	/* controller release 1 */
+
+	if (ConfigIO) {
+		CtlP->isUPCI = 1;
+		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
+		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
+		CtlP->AiopIntrBits = upci_aiop_intr_bits;
+	} else {
+		CtlP->isUPCI = 0;
+		CtlP->PCIIO =
+		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
+		CtlP->AiopIntrBits = aiop_intr_bits;
+	}
+
+	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
+	/* Init AIOPs */
+	CtlP->NumAiop = 0;
+	for (i = 0; i < AiopIOListSize; i++) {
+		io = AiopIOList[i];
+		CtlP->AiopIO[i] = (WordIO_t) io;
+		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+
+		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
+		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
+			break;	/* done looking for AIOPs */
+
+		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
+		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
+		sOutB(io + _INDX_DATA, sClockPrescale);
+		CtlP->NumAiop++;	/* bump count of AIOPs */
+	}
+
+	if (CtlP->NumAiop == 0)
+		return (-1);
+	else
+		return (CtlP->NumAiop);
+}
+
+/***************************************************************************
+Function: sReadAiopID
+Purpose:  Read the AIOP idenfication number directly from an AIOP.
+Call:     sReadAiopID(io)
+          ByteIO_t io: AIOP base I/O address
+Return:   int: Flag AIOPID_XXXX if a valid AIOP is found, where X
+                 is replace by an identifying number.
+          Flag AIOPID_NULL if no valid AIOP is found
+Warnings: No context switches are allowed while executing this function.
+
+*/
+int sReadAiopID(ByteIO_t io)
+{
+	Byte_t AiopID;		/* ID byte from AIOP */
+
+	sOutB(io + _CMD_REG, RESET_ALL);	/* reset AIOP */
+	sOutB(io + _CMD_REG, 0x0);
+	AiopID = sInW(io + _CHN_STAT0) & 0x07;
+	if (AiopID == 0x06)
+		return (1);
+	else			/* AIOP does not exist */
+		return (-1);
+}
+
+/***************************************************************************
+Function: sReadAiopNumChan
+Purpose:  Read the number of channels available in an AIOP directly from
+          an AIOP.
+Call:     sReadAiopNumChan(io)
+          WordIO_t io: AIOP base I/O address
+Return:   int: The number of channels available
+Comments: The number of channels is determined by write/reads from identical
+          offsets within the SRAM address spaces for channels 0 and 4.
+          If the channel 4 space is mirrored to channel 0 it is a 4 channel
+          AIOP, otherwise it is an 8 channel.
+Warnings: No context switches are allowed while executing this function.
+*/
+int sReadAiopNumChan(WordIO_t io)
+{
+	Word_t x;
+	static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
+
+	/* write to chan 0 SRAM */
+	sOutDW((DWordIO_t) io + _INDX_ADDR, *((DWord_t *) & R[0]));
+	sOutW(io + _INDX_ADDR, 0);	/* read from SRAM, chan 0 */
+	x = sInW(io + _INDX_DATA);
+	sOutW(io + _INDX_ADDR, 0x4000);	/* read from SRAM, chan 4 */
+	if (x != sInW(io + _INDX_DATA))	/* if different must be 8 chan */
+		return (8);
+	else
+		return (4);
+}
+
+/***************************************************************************
+Function: sInitChan
+Purpose:  Initialization of a channel and channel structure
+Call:     sInitChan(CtlP,ChP,AiopNum,ChanNum)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          CHANNEL_T *ChP; Ptr to channel structure
+          int AiopNum; AIOP number within controller
+          int ChanNum; Channel number within AIOP
+Return:   int: TRUE if initialization succeeded, FALSE if it fails because channel
+               number exceeds number of channels available in AIOP.
+Comments: This function must be called before a channel can be used.
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+*/
+int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
+	      int ChanNum)
+{
+	int i;
+	WordIO_t AiopIO;
+	WordIO_t ChIOOff;
+	Byte_t *ChR;
+	Word_t ChOff;
+	static Byte_t R[4];
+	int brd9600;
+
+	if (ChanNum >= CtlP->AiopNumChan[AiopNum])
+		return (FALSE);	/* exceeds num chans in AIOP */
+
+	/* Channel, AIOP, and controller identifiers */
+	ChP->CtlP = CtlP;
+	ChP->ChanID = CtlP->AiopID[AiopNum];
+	ChP->AiopNum = AiopNum;
+	ChP->ChanNum = ChanNum;
+
+	/* Global direct addresses */
+	AiopIO = CtlP->AiopIO[AiopNum];
+	ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG;
+	ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN;
+	ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK;
+	ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR;
+	ChP->IndexData = AiopIO + _INDX_DATA;
+
+	/* Channel direct addresses */
+	ChIOOff = AiopIO + ChP->ChanNum * 2;
+	ChP->TxRxData = ChIOOff + _TD0;
+	ChP->ChanStat = ChIOOff + _CHN_STAT0;
+	ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
+	ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0;
+
+	/* Initialize the channel from the RData array */
+	for (i = 0; i < RDATASIZE; i += 4) {
+		R[0] = RData[i];
+		R[1] = RData[i + 1] + 0x10 * ChanNum;
+		R[2] = RData[i + 2];
+		R[3] = RData[i + 3];
+		sOutDW(ChP->IndexAddr, *((DWord_t *) & R[0]));
+	}
+
+	ChR = ChP->R;
+	for (i = 0; i < RREGDATASIZE; i += 4) {
+		ChR[i] = RRegData[i];
+		ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum;
+		ChR[i + 2] = RRegData[i + 2];
+		ChR[i + 3] = RRegData[i + 3];
+	}
+
+	/* Indexed registers */
+	ChOff = (Word_t) ChanNum *0x1000;
+
+	if (sClockPrescale == 0x14)
+		brd9600 = 47;
+	else
+		brd9600 = 23;
+
+	ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD);
+	ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
+	ChP->BaudDiv[2] = (Byte_t) brd9600;
+	ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->BaudDiv[0]);
+
+	ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
+	ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
+	ChP->TxControl[2] = 0;
+	ChP->TxControl[3] = 0;
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
+
+	ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
+	ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
+	ChP->RxControl[2] = 0;
+	ChP->RxControl[3] = 0;
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
+
+	ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
+	ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
+	ChP->TxEnables[2] = 0;
+	ChP->TxEnables[3] = 0;
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxEnables[0]);
+
+	ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
+	ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
+	ChP->TxCompare[2] = 0;
+	ChP->TxCompare[3] = 0;
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxCompare[0]);
+
+	ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
+	ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
+	ChP->TxReplace1[2] = 0;
+	ChP->TxReplace1[3] = 0;
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace1[0]);
+
+	ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
+	ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
+	ChP->TxReplace2[2] = 0;
+	ChP->TxReplace2[3] = 0;
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace2[0]);
+
+	ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
+	ChP->TxFIFO = ChOff + _TX_FIFO;
+
+	sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT);	/* apply reset Tx FIFO count */
+	sOutB(ChP->Cmd, (Byte_t) ChanNum);	/* remove reset Tx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs);	/* clear Tx in/out ptrs */
+	sOutW(ChP->IndexData, 0);
+	ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
+	ChP->RxFIFO = ChOff + _RX_FIFO;
+
+	sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT);	/* apply reset Rx FIFO count */
+	sOutB(ChP->Cmd, (Byte_t) ChanNum);	/* remove reset Rx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs);	/* clear Rx out ptr */
+	sOutW(ChP->IndexData, 0);
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2);	/* clear Rx in ptr */
+	sOutW(ChP->IndexData, 0);
+	ChP->TxPrioCnt = ChOff + _TXP_CNT;
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt);
+	sOutB(ChP->IndexData, 0);
+	ChP->TxPrioPtr = ChOff + _TXP_PNTR;
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr);
+	sOutB(ChP->IndexData, 0);
+	ChP->TxPrioBuf = ChOff + _TXP_BUF;
+	sEnRxProcessor(ChP);	/* start the Rx processor */
+
+	return (TRUE);
+}
+
+/***************************************************************************
+Function: sStopRxProcessor
+Purpose:  Stop the receive processor from processing a channel.
+Call:     sStopRxProcessor(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+
+Comments: The receive processor can be started again with sStartRxProcessor().
+          This function causes the receive processor to skip over the
+          stopped channel.  It does not stop it from processing other channels.
+
+Warnings: No context switches are allowed while executing this function.
+
+          Do not leave the receive processor stopped for more than one
+          character time.
+
+          After calling this function a delay of 4 uS is required to ensure
+          that the receive processor is no longer processing this channel.
+*/
+void sStopRxProcessor(CHANNEL_T * ChP)
+{
+	Byte_t R[4];
+
+	R[0] = ChP->R[0];
+	R[1] = ChP->R[1];
+	R[2] = 0x0a;
+	R[3] = ChP->R[3];
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & R[0]);
+}
+
+/***************************************************************************
+Function: sFlushRxFIFO
+Purpose:  Flush the Rx FIFO
+Call:     sFlushRxFIFO(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   void
+Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
+          while it is being flushed the receive processor is stopped
+          and the transmitter is disabled.  After these operations a
+          4 uS delay is done before clearing the pointers to allow
+          the receive processor to stop.  These items are handled inside
+          this function.
+Warnings: No context switches are allowed while executing this function.
+*/
+void sFlushRxFIFO(CHANNEL_T * ChP)
+{
+	int i;
+	Byte_t Ch;		/* channel number within AIOP */
+	int RxFIFOEnabled;	/* TRUE if Rx FIFO enabled */
+
+	if (sGetRxCnt(ChP) == 0)	/* Rx FIFO empty */
+		return;		/* don't need to flush */
+
+	RxFIFOEnabled = FALSE;
+	if (ChP->R[0x32] == 0x08) {	/* Rx FIFO is enabled */
+		RxFIFOEnabled = TRUE;
+		sDisRxFIFO(ChP);	/* disable it */
+		for (i = 0; i < 2000 / 200; i++)	/* delay 2 uS to allow proc to disable FIFO */
+			sInB(ChP->IntChan);	/* depends on bus i/o timing */
+	}
+	sGetChanStatus(ChP);	/* clear any pending Rx errors in chan stat */
+	Ch = (Byte_t) sGetChanNum(ChP);
+	sOutB(ChP->Cmd, Ch | RESRXFCNT);	/* apply reset Rx FIFO count */
+	sOutB(ChP->Cmd, Ch);	/* remove reset Rx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs);	/* clear Rx out ptr */
+	sOutW(ChP->IndexData, 0);
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2);	/* clear Rx in ptr */
+	sOutW(ChP->IndexData, 0);
+	if (RxFIFOEnabled)
+		sEnRxFIFO(ChP);	/* enable Rx FIFO */
+}
+
+/***************************************************************************
+Function: sFlushTxFIFO
+Purpose:  Flush the Tx FIFO
+Call:     sFlushTxFIFO(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   void
+Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
+          while it is being flushed the receive processor is stopped
+          and the transmitter is disabled.  After these operations a
+          4 uS delay is done before clearing the pointers to allow
+          the receive processor to stop.  These items are handled inside
+          this function.
+Warnings: No context switches are allowed while executing this function.
+*/
+void sFlushTxFIFO(CHANNEL_T * ChP)
+{
+	int i;
+	Byte_t Ch;		/* channel number within AIOP */
+	int TxEnabled;		/* TRUE if transmitter enabled */
+
+	if (sGetTxCnt(ChP) == 0)	/* Tx FIFO empty */
+		return;		/* don't need to flush */
+
+	TxEnabled = FALSE;
+	if (ChP->TxControl[3] & TX_ENABLE) {
+		TxEnabled = TRUE;
+		sDisTransmit(ChP);	/* disable transmitter */
+	}
+	sStopRxProcessor(ChP);	/* stop Rx processor */
+	for (i = 0; i < 4000 / 200; i++)	/* delay 4 uS to allow proc to stop */
+		sInB(ChP->IntChan);	/* depends on bus i/o timing */
+	Ch = (Byte_t) sGetChanNum(ChP);
+	sOutB(ChP->Cmd, Ch | RESTXFCNT);	/* apply reset Tx FIFO count */
+	sOutB(ChP->Cmd, Ch);	/* remove reset Tx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs);	/* clear Tx in/out ptrs */
+	sOutW(ChP->IndexData, 0);
+	if (TxEnabled)
+		sEnTransmit(ChP);	/* enable transmitter */
+	sStartRxProcessor(ChP);	/* restart Rx processor */
+}
+
+/***************************************************************************
+Function: sWriteTxPrioByte
+Purpose:  Write a byte of priority transmit data to a channel
+Call:     sWriteTxPrioByte(ChP,Data)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Byte_t Data; The transmit data byte
+
+Return:   int: 1 if the bytes is successfully written, otherwise 0.
+
+Comments: The priority byte is transmitted before any data in the Tx FIFO.
+
+Warnings: No context switches are allowed while executing this function.
+*/
+int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
+{
+	Byte_t DWBuf[4];	/* buffer for double word writes */
+	Word_t *WordPtr;	/* must be far because Win SS != DS */
+	register DWordIO_t IndexAddr;
+
+	if (sGetTxCnt(ChP) > 1) {	/* write it to Tx priority buffer */
+		IndexAddr = ChP->IndexAddr;
+		sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt);	/* get priority buffer status */
+		if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND)	/* priority buffer busy */
+			return (0);	/* nothing sent */
+
+		WordPtr = (Word_t *) (&DWBuf[0]);
+		*WordPtr = ChP->TxPrioBuf;	/* data byte address */
+
+		DWBuf[2] = Data;	/* data byte value */
+		sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0])));	/* write it out */
+
+		*WordPtr = ChP->TxPrioCnt;	/* Tx priority count address */
+
+		DWBuf[2] = PRI_PEND + 1;	/* indicate 1 byte pending */
+		DWBuf[3] = 0;	/* priority buffer pointer */
+		sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0])));	/* write it out */
+	} else {		/* write it to Tx FIFO */
+
+		sWriteTxByte(sGetTxRxDataIO(ChP), Data);
+	}
+	return (1);		/* 1 byte sent */
+}
+
+/***************************************************************************
+Function: sEnInterrupts
+Purpose:  Enable one or more interrupts for a channel
+Call:     sEnInterrupts(ChP,Flags)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Word_t Flags: Interrupt enable flags, can be any combination
+             of the following flags:
+                TXINT_EN:   Interrupt on Tx FIFO empty
+                RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
+                            sSetRxTrigger())
+                SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
+                MCINT_EN:   Interrupt on modem input change
+                CHANINT_EN: Allow channel interrupt signal to the AIOP's
+                            Interrupt Channel Register.
+Return:   void
+Comments: If an interrupt enable flag is set in Flags, that interrupt will be
+          enabled.  If an interrupt enable flag is not set in Flags, that
+          interrupt will not be changed.  Interrupts can be disabled with
+          function sDisInterrupts().
+
+          This function sets the appropriate bit for the channel in the AIOP's
+          Interrupt Mask Register if the CHANINT_EN flag is set.  This allows
+          this channel's bit to be set in the AIOP's Interrupt Channel Register.
+
+          Interrupts must also be globally enabled before channel interrupts
+          will be passed on to the host.  This is done with function
+          sEnGlobalInt().
+
+          In some cases it may be desirable to disable interrupts globally but
+          enable channel interrupts.  This would allow the global interrupt
+          status register to be used to determine which AIOPs need service.
+*/
+void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
+{
+	Byte_t Mask;		/* Interrupt Mask Register */
+
+	ChP->RxControl[2] |=
+	    ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
+
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
+
+	ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
+
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
+
+	if (Flags & CHANINT_EN) {
+		Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
+		sOutB(ChP->IntMask, Mask);
+	}
+}
+
+/***************************************************************************
+Function: sDisInterrupts
+Purpose:  Disable one or more interrupts for a channel
+Call:     sDisInterrupts(ChP,Flags)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Word_t Flags: Interrupt flags, can be any combination
+             of the following flags:
+                TXINT_EN:   Interrupt on Tx FIFO empty
+                RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
+                            sSetRxTrigger())
+                SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
+                MCINT_EN:   Interrupt on modem input change
+                CHANINT_EN: Disable channel interrupt signal to the
+                            AIOP's Interrupt Channel Register.
+Return:   void
+Comments: If an interrupt flag is set in Flags, that interrupt will be
+          disabled.  If an interrupt flag is not set in Flags, that
+          interrupt will not be changed.  Interrupts can be enabled with
+          function sEnInterrupts().
+
+          This function clears the appropriate bit for the channel in the AIOP's
+          Interrupt Mask Register if the CHANINT_EN flag is set.  This blocks
+          this channel's bit from being set in the AIOP's Interrupt Channel
+          Register.
+*/
+void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
+{
+	Byte_t Mask;		/* Interrupt Mask Register */
+
+	ChP->RxControl[2] &=
+	    ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
+	ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
+	sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
+
+	if (Flags & CHANINT_EN) {
+		Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
+		sOutB(ChP->IntMask, Mask);
+	}
+}
+
+void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode)
+{
+	sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum);
+}
+
+/*
+ *  Not an official SSCI function, but how to reset RocketModems.
+ *  ISA bus version
+ */
+void sModemReset(CONTROLLER_T * CtlP, int chan, int on)
+{
+	ByteIO_t addr;
+	Byte_t val;
+
+	addr = CtlP->AiopIO[0] + 0x400;
+	val = sInB(CtlP->MReg3IO);
+	/* if AIOP[1] is not enabled, enable it */
+	if ((val & 2) == 0) {
+		val = sInB(CtlP->MReg2IO);
+		sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03));
+		sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6));
+	}
+
+	sEnAiop(CtlP, 1);
+	if (!on)
+		addr += 8;
+	sOutB(addr + chan, 0);	/* apply or remove reset */
+	sDisAiop(CtlP, 1);
+}
+
+/*
+ *  Not an official SSCI function, but how to reset RocketModems.
+ *  PCI bus version
+ */
+void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
+{
+	ByteIO_t addr;
+
+	addr = CtlP->AiopIO[0] + 0x40;	/* 2nd AIOP */
+	if (!on)
+		addr += 8;
+	sOutB(addr + chan, 0);	/* apply or remove reset */
+}
+
+/*  Resets the speaker controller on RocketModem II and III devices */
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
+{
+	ByteIO_t addr;
+
+	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
+	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
+		addr = CtlP->AiopIO[0] + 0x4F;
+		sOutB(addr, 0);
+	}
+
+	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
+	if ((model == MODEL_UPCI_RM3_8PORT)
+	    || (model == MODEL_UPCI_RM3_4PORT)) {
+		addr = CtlP->AiopIO[0] + 0x88;
+		sOutB(addr, 0);
+	}
+}
+
+/*  Returns the line number given the controller (board), aiop and channel number */
+static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
+{
+	return lineNumbers[(ctrl << 5) | (aiop << 3) | ch];
+}
+
+/*
+ *  Stores the line number associated with a given controller (board), aiop
+ *  and channel number.  
+ *  Returns:  The line number assigned 
+ */
+static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
+{
+	lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++;
+	return (nextLineNumber - 1);
+}