diff options
| author | Stephan Gerhold <stephan.gerhold@kernkonzept.com> | 2023-03-08 14:31:55 +0100 |
|---|---|---|
| committer | Luiz Augusto von Dentz <luiz.von.dentz@intel.com> | 2023-03-23 13:09:38 -0700 |
| commit | 5d44ab9e204200a78ad55cdf185aa2bb109b5950 (patch) | |
| tree | 379b10b1368aaf717c57590dd2e1b8e4a257c182 /drivers/bluetooth | |
| parent | 902160cdb2bf4d23cd75f43ed0597ddf0134bb89 (diff) | |
| download | lwn-5d44ab9e204200a78ad55cdf185aa2bb109b5950.tar.gz lwn-5d44ab9e204200a78ad55cdf185aa2bb109b5950.zip | |
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:
Bluetooth: hci0: Opcode 0x c03 failed: -110
Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.
Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.
Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Diffstat (limited to 'drivers/bluetooth')
| -rw-r--r-- | drivers/bluetooth/btqcomsmd.c | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c index 2acb719e596f..11c7e04bf394 100644 --- a/drivers/bluetooth/btqcomsmd.c +++ b/drivers/bluetooth/btqcomsmd.c @@ -122,6 +122,21 @@ static int btqcomsmd_setup(struct hci_dev *hdev) return 0; } +static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + int ret; + + ret = qca_set_bdaddr_rome(hdev, bdaddr); + if (ret) + return ret; + + /* The firmware stops responding for a while after setting the bdaddr, + * causing timeouts for subsequent commands. Sleep a bit to avoid this. + */ + usleep_range(1000, 10000); + return 0; +} + static int btqcomsmd_probe(struct platform_device *pdev) { struct btqcomsmd *btq; @@ -162,7 +177,7 @@ static int btqcomsmd_probe(struct platform_device *pdev) hdev->close = btqcomsmd_close; hdev->send = btqcomsmd_send; hdev->setup = btqcomsmd_setup; - hdev->set_bdaddr = qca_set_bdaddr_rome; + hdev->set_bdaddr = btqcomsmd_set_bdaddr; ret = hci_register_dev(hdev); if (ret < 0) |