Merge tag 'wireless-drivers-next-for-davem-2016-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
pull-request: wireless-drivers-next 2016-07-22

I'm sick so I have to keep this short, but here's the last pull request
to net-next. This time there's a trivial conflict with mtd tree:

http://lkml.kernel.org/g/20160720123133.44dab209@canb.auug.org.au

We concluded with Brian (CCed) that it's best that we ask Linus to fix
this. The patches have been in linux-next for a couple of days. This
time I haven't done any merge tests so I don't know if there are any
other conflicts etc.

Please let me know if there are any problems.

wireless-drivers-next patches for 4.8

Major changes:

wl18xx

* add initial mesh support

bcma

* serial flash support on non-MIPS SoCs

ath10k

* enable support for QCA9888
* disable wake_tx_queue() mac80211 op for older devices to workaround
  throughput regression

ath9k

* implement temperature compensation support for AR9003+
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 15 insertions, 6 deletions

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index efdc2ae8441a..b5c48a8d485f 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -76,9 +76,16 @@ config BCMA_PFLASH
 	default y
 
 config BCMA_SFLASH
-	bool
-	depends on BCMA_DRIVER_MIPS
+	bool "ChipCommon-attached serial flash support"
+	depends on BCMA_HOST_SOC
 	default y
+	help
+	  Some cheap devices have serial flash connected to the ChipCommon
+	  instead of independent SPI controller. It requires using a separated
+	  driver that implements ChipCommon specific interface communication.
+
+	  Enabling this symbol will let bcma recognize serial flash and register
+	  it as platform device.
 
 config BCMA_NFLASH
 	bool
diff --git a/drivers/bcma/driver_chipcommon_b.c b/drivers/bcma/driver_chipcommon_b.c
index c20b5f4ff290..57f10b58b47c 100644
--- a/drivers/bcma/driver_chipcommon_b.c
+++ b/drivers/bcma/driver_chipcommon_b.c
@@ -33,11 +33,12 @@ static bool bcma_wait_reg(struct bcma_bus *bus, void __iomem *addr, u32 mask,
 void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value)
 {
 	struct bcma_bus *bus = ccb->core->bus;
+	void __iomem *mii = ccb->mii;
 
-	writel(offset, ccb->mii + 0x00);
-	bcma_wait_reg(bus, ccb->mii + 0x00, 0x0100, 0x0000, 100);
-	writel(value, ccb->mii + 0x04);
-	bcma_wait_reg(bus, ccb->mii + 0x00, 0x0100, 0x0000, 100);
+	writel(offset, mii + BCMA_CCB_MII_MNG_CTL);
+	bcma_wait_reg(bus, mii + BCMA_CCB_MII_MNG_CTL, 0x0100, 0x0000, 100);
+	writel(value, mii + BCMA_CCB_MII_MNG_CMD_DATA);
+	bcma_wait_reg(bus, mii + BCMA_CCB_MII_MNG_CTL, 0x0100, 0x0000, 100);
 }
 EXPORT_SYMBOL_GPL(bcma_chipco_b_mii_write);
 
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index cae5385cf499..bd46569e0e52 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -295,6 +295,7 @@ static const struct pci_device_id bcma_pci_bridge_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_FOXCONN, 0xe092) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },