diff options
author | Jakub Kicinski <kuba@kernel.org> | 2022-04-26 10:54:32 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2022-04-27 12:22:56 +0100 |
commit | 5b74a20d35ab8ff05c2111233bb069eb7fcea4e9 (patch) | |
tree | 963615531e825c3e3e951ce815622e9458d66afd /drivers/atm | |
parent | 41c335c8212387a7563b0eb7f885591ad49970be (diff) | |
download | lwn-5b74a20d35ab8ff05c2111233bb069eb7fcea4e9.tar.gz lwn-5b74a20d35ab8ff05c2111233bb069eb7fcea4e9.zip |
net: atm: remove support for Madge Horizon ATM devices
This driver received nothing but automated fixes since git era begun.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/atm')
-rw-r--r-- | drivers/atm/Kconfig | 24 | ||||
-rw-r--r-- | drivers/atm/Makefile | 1 | ||||
-rw-r--r-- | drivers/atm/horizon.c | 2853 | ||||
-rw-r--r-- | drivers/atm/horizon.h | 492 |
4 files changed, 0 insertions, 3370 deletions
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig index 360c98ad29eb..9c778308722a 100644 --- a/drivers/atm/Kconfig +++ b/drivers/atm/Kconfig @@ -234,30 +234,6 @@ config ATM_IDT77252_USE_SUNI depends on ATM_IDT77252 default y -config ATM_HORIZON - tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)" - depends on PCI && VIRT_TO_BUS - help - This is a driver for the Horizon chipset ATM adapter cards once - produced by Madge Networks Ltd. Say Y (or M to compile as a module - named horizon) here if you have one of these cards. - -config ATM_HORIZON_DEBUG - bool "Enable debugging messages" - depends on ATM_HORIZON - help - Somewhat useful debugging messages are available. The choice of - messages is controlled by a bitmap. This may be specified as a - module argument (kernel command line argument as well?), changed - dynamically using an ioctl (not yet) or changed by sending the - string "Dxxxx" to VCI 1023 (where x is a hex digit). See the file - <file:drivers/atm/horizon.h> for the meanings of the bits in the - mask. - - When active, these messages can have a significant impact on the - speed of the driver, and the size of your syslog files! When - inactive, they will have only a modest impact on performance. - config ATM_IA tristate "Interphase ATM PCI x575/x525/x531" depends on PCI diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile index 7d38fdaddd09..1b6a8ddaf007 100644 --- a/drivers/atm/Makefile +++ b/drivers/atm/Makefile @@ -7,7 +7,6 @@ fore_200e-y := fore200e.o obj-$(CONFIG_ATM_ZATM) += zatm.o uPD98402.o obj-$(CONFIG_ATM_NICSTAR) += nicstar.o -obj-$(CONFIG_ATM_HORIZON) += horizon.o obj-$(CONFIG_ATM_IA) += iphase.o suni.o obj-$(CONFIG_ATM_FORE200E) += fore_200e.o obj-$(CONFIG_ATM_ENI) += eni.o suni.o diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c deleted file mode 100644 index d0e67ec46216..000000000000 --- a/drivers/atm/horizon.c +++ /dev/null @@ -1,2853 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - Madge Horizon ATM Adapter driver. - Copyright (C) 1995-1999 Madge Networks Ltd. - -*/ - -/* - IMPORTANT NOTE: Madge Networks no longer makes the adapters - supported by this driver and makes no commitment to maintain it. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched/signal.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/atm.h> -#include <linux/atmdev.h> -#include <linux/sonet.h> -#include <linux/skbuff.h> -#include <linux/time.h> -#include <linux/delay.h> -#include <linux/uio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/wait.h> -#include <linux/slab.h> - -#include <asm/io.h> -#include <linux/atomic.h> -#include <linux/uaccess.h> -#include <asm/string.h> -#include <asm/byteorder.h> - -#include "horizon.h" - -#define maintainer_string "Giuliano Procida at Madge Networks <gprocida@madge.com>" -#define description_string "Madge ATM Horizon [Ultra] driver" -#define version_string "1.2.1" - -static inline void __init show_version (void) { - printk ("%s version %s\n", description_string, version_string); -} - -/* - - CREDITS - - Driver and documentation by: - - Chris Aston Madge Networks - Giuliano Procida Madge Networks - Simon Benham Madge Networks - Simon Johnson Madge Networks - Various Others Madge Networks - - Some inspiration taken from other drivers by: - - Alexandru Cucos UTBv - Kari Mettinen University of Helsinki - Werner Almesberger EPFL LRC - - Theory of Operation - - I Hardware, detection, initialisation and shutdown. - - 1. Supported Hardware - - This driver should handle all variants of the PCI Madge ATM adapters - with the Horizon chipset. These are all PCI cards supporting PIO, BM - DMA and a form of MMIO (registers only, not internal RAM). - - The driver is only known to work with SONET and UTP Horizon Ultra - cards at 155Mb/s. However, code is in place to deal with both the - original Horizon and 25Mb/s operation. - - There are two revisions of the Horizon ASIC: the original and the - Ultra. Details of hardware bugs are in section III. - - The ASIC version can be distinguished by chip markings but is NOT - indicated by the PCI revision (all adapters seem to have PCI rev 1). - - I believe that: - - Horizon => Collage 25 PCI Adapter (UTP and STP) - Horizon Ultra => Collage 155 PCI Client (UTP or SONET) - Ambassador x => Collage 155 PCI Server (completely different) - - Horizon (25Mb/s) is fitted with UTP and STP connectors. It seems to - have a Madge B154 plus glue logic serializer. I have also found a - really ancient version of this with slightly different glue. It - comes with the revision 0 (140-025-01) ASIC. - - Horizon Ultra (155Mb/s) is fitted with either a Pulse Medialink - output (UTP) or an HP HFBR 5205 output (SONET). It has either - Madge's SAMBA framer or a SUNI-lite device (early versions). It - comes with the revision 1 (140-027-01) ASIC. - - 2. Detection - - All Horizon-based cards present with the same PCI Vendor and Device - IDs. The standard Linux 2.2 PCI API is used to locate any cards and - to enable bus-mastering (with appropriate latency). - - ATM_LAYER_STATUS in the control register distinguishes between the - two possible physical layers (25 and 155). It is not clear whether - the 155 cards can also operate at 25Mbps. We rely on the fact that a - card operates at 155 if and only if it has the newer Horizon Ultra - ASIC. - - For 155 cards the two possible framers are probed for and then set - up for loop-timing. - - 3. Initialisation - - The card is reset and then put into a known state. The physical - layer is configured for normal operation at the appropriate speed; - in the case of the 155 cards, the framer is initialised with - line-based timing; the internal RAM is zeroed and the allocation of - buffers for RX and TX is made; the Burnt In Address is read and - copied to the ATM ESI; various policy settings for RX (VPI bits, - unknown VCs, oam cells) are made. Ideally all policy items should be - configurable at module load (if not actually on-demand), however, - only the vpi vs vci bit allocation can be specified at insmod. - - 4. Shutdown - - This is in response to module_cleaup. No VCs are in use and the card - should be idle; it is reset. - - II Driver software (as it should be) - - 0. Traffic Parameters - - The traffic classes (not an enumeration) are currently: ATM_NONE (no - traffic), ATM_UBR, ATM_CBR, ATM_VBR and ATM_ABR, ATM_ANYCLASS - (compatible with everything). Together with (perhaps only some of) - the following items they make up the traffic specification. - - struct atm_trafprm { - unsigned char traffic_class; traffic class (ATM_UBR, ...) - int max_pcr; maximum PCR in cells per second - int pcr; desired PCR in cells per second - int min_pcr; minimum PCR in cells per second - int max_cdv; maximum CDV in microseconds - int max_sdu; maximum SDU in bytes - }; - - Note that these denote bandwidth available not bandwidth used; the - possibilities according to ATMF are: - - Real Time (cdv and max CDT given) - - CBR(pcr) pcr bandwidth always available - rtVBR(pcr,scr,mbs) scr bandwidth always available, up to pcr at mbs too - - Non Real Time - - nrtVBR(pcr,scr,mbs) scr bandwidth always available, up to pcr at mbs too - UBR() - ABR(mcr,pcr) mcr bandwidth always available, up to pcr (depending) too - - mbs is max burst size (bucket) - pcr and scr have associated cdvt values - mcr is like scr but has no cdtv - cdtv may differ at each hop - - Some of the above items are qos items (as opposed to traffic - parameters). We have nothing to do with qos. All except ABR can have - their traffic parameters converted to GCRA parameters. The GCRA may - be implemented as a (real-number) leaky bucket. The GCRA can be used - in complicated ways by switches and in simpler ways by end-stations. - It can be used both to filter incoming cells and shape out-going - cells. - - ATM Linux actually supports: - - ATM_NONE() (no traffic in this direction) - ATM_UBR(max_frame_size) - ATM_CBR(max/min_pcr, max_cdv, max_frame_size) - - 0 or ATM_MAX_PCR are used to indicate maximum available PCR - - A traffic specification consists of the AAL type and separate - traffic specifications for either direction. In ATM Linux it is: - - struct atm_qos { - struct atm_trafprm txtp; - struct atm_trafprm rxtp; - unsigned char aal; - }; - - AAL types are: - - ATM_NO_AAL AAL not specified - ATM_AAL0 "raw" ATM cells - ATM_AAL1 AAL1 (CBR) - ATM_AAL2 AAL2 (VBR) - ATM_AAL34 AAL3/4 (data) - ATM_AAL5 AAL5 (data) - ATM_SAAL signaling AAL - - The Horizon has support for AAL frame types: 0, 3/4 and 5. However, - it does not implement AAL 3/4 SAR and it has a different notion of - "raw cell" to ATM Linux's (48 bytes vs. 52 bytes) so neither are - supported by this driver. - - The Horizon has limited support for ABR (including UBR), VBR and - CBR. Each TX channel has a bucket (containing up to 31 cell units) - and two timers (PCR and SCR) associated with it that can be used to - govern cell emissions and host notification (in the case of ABR this - is presumably so that RM cells may be emitted at appropriate times). - The timers may either be disabled or may be set to any of 240 values - (determined by the clock crystal, a fixed (?) per-device divider, a - configurable divider and a configurable timer preload value). - - At the moment only UBR and CBR are supported by the driver. VBR will - be supported as soon as ATM for Linux supports it. ABR support is - very unlikely as RM cell handling is completely up to the driver. - - 1. TX (TX channel setup and TX transfer) - - The TX half of the driver owns the TX Horizon registers. The TX - component in the IRQ handler is the BM completion handler. This can - only be entered when tx_busy is true (enforced by hardware). The - other TX component can only be entered when tx_busy is false - (enforced by driver). So TX is single-threaded. - - Apart from a minor optimisation to not re-select the last channel, - the TX send component works as follows: - - Atomic test and set tx_busy until we succeed; we should implement - some sort of timeout so that tx_busy will never be stuck at true. - - If no TX channel is set up for this VC we wait for an idle one (if - necessary) and set it up. - - At this point we have a TX channel ready for use. We wait for enough - buffers to become available then start a TX transmit (set the TX - descriptor, schedule transfer, exit). - - The IRQ component handles TX completion (stats, free buffer, tx_busy - unset, exit). We also re-schedule further transfers for the same - frame if needed. - - TX setup in more detail: - - TX open is a nop, the relevant information is held in the hrz_vcc - (vcc->dev_data) structure and is "cached" on the card. - - TX close gets the TX lock and clears the channel from the "cache". - - 2. RX (Data Available and RX transfer) - - The RX half of the driver owns the RX registers. There are two RX - components in the IRQ handler: the data available handler deals with - fresh data that has arrived on the card, the BM completion handler - is very similar to the TX completion handler. The data available - handler grabs the rx_lock and it is only released once the data has - been discarded or completely transferred to the host. The BM - completion handler only runs when the lock is held; the data - available handler is locked out over the same period. - - Data available on the card triggers an interrupt. If the data is not - suitable for our existing RX channels or we cannot allocate a buffer - it is flushed. Otherwise an RX receive is scheduled. Multiple RX - transfers may be scheduled for the same frame. - - RX setup in more detail: - - RX open... - RX close... - - III Hardware Bugs - - 0. Byte vs Word addressing of adapter RAM. - - A design feature; see the .h file (especially the memory map). - - 1. Bus Master Data Transfers (original Horizon only, fixed in Ultra) - - The host must not start a transmit direction transfer at a - non-four-byte boundary in host memory. Instead the host should - perform a byte, or a two byte, or one byte followed by two byte - transfer in order to start the rest of the transfer on a four byte - boundary. RX is OK. - - Simultaneous transmit and receive direction bus master transfers are - not allowed. - - The simplest solution to these two is to always do PIO (never DMA) - in the TX direction on the original Horizon. More complicated - solutions are likely to hurt my brain. - - 2. Loss of buffer on close VC - - When a VC is being closed, the buffer associated with it is not - returned to the pool. The host must store the reference to this - buffer and when opening a new VC then give it to that new VC. - - The host intervention currently consists of stacking such a buffer - pointer at VC close and checking the stack at VC open. - - 3. Failure to close a VC - - If a VC is currently receiving a frame then closing the VC may fail - and the frame continues to be received. - - The solution is to make sure any received frames are flushed when - ready. This is currently done just before the solution to 2. - - 4. PCI bus (original Horizon only, fixed in Ultra) - - Reading from the data port prior to initialisation will hang the PCI - bus. Just don't do that then! We don't. - - IV To Do List - - . Timer code may be broken. - - . Allow users to specify buffer allocation split for TX and RX. - - . Deal once and for all with buggy VC close. - - . Handle interrupted and/or non-blocking operations. - - . Change some macros to functions and move from .h to .c. - - . Try to limit the number of TX frames each VC may have queued, in - order to reduce the chances of TX buffer exhaustion. - - . Implement VBR (bucket and timers not understood) and ABR (need to - do RM cells manually); also no Linux support for either. - - . Implement QoS changes on open VCs (involves extracting parts of VC open - and close into separate functions and using them to make changes). - -*/ - -/********** globals **********/ - -static void do_housekeeping (struct timer_list *t); - -static unsigned short debug = 0; -static unsigned short vpi_bits = 0; -static int max_tx_size = 9000; -static int max_rx_size = 9000; -static unsigned char pci_lat = 0; - -/********** access functions **********/ - -/* Read / Write Horizon registers */ -static inline void wr_regl (const hrz_dev * dev, unsigned char reg, u32 data) { - outl (cpu_to_le32 (data), dev->iobase + reg); -} - -static inline u32 rd_regl (const hrz_dev * dev, unsigned char reg) { - return le32_to_cpu (inl (dev->iobase + reg)); -} - -static inline void wr_regw (const hrz_dev * dev, unsigned char reg, u16 data) { - outw (cpu_to_le16 (data), dev->iobase + reg); -} - -static inline u16 rd_regw (const hrz_dev * dev, unsigned char reg) { - return le16_to_cpu (inw (dev->iobase + reg)); -} - -static inline void wrs_regb (const hrz_dev * dev, unsigned char reg, void * addr, u32 len) { - outsb (dev->iobase + reg, addr, len); -} - -static inline void rds_regb (const hrz_dev * dev, unsigned char reg, void * addr, u32 len) { - insb (dev->iobase + reg, addr, len); -} - -/* Read / Write to a given address in Horizon buffer memory. - Interrupts must be disabled between the address register and data - port accesses as these must form an atomic operation. */ -static inline void wr_mem (const hrz_dev * dev, HDW * addr, u32 data) { - // wr_regl (dev, MEM_WR_ADDR_REG_OFF, (u32) addr); - wr_regl (dev, MEM_WR_ADDR_REG_OFF, (addr - (HDW *) 0) * sizeof(HDW)); - wr_regl (dev, MEMORY_PORT_OFF, data); -} - -static inline u32 rd_mem (const hrz_dev * dev, HDW * addr) { - // wr_regl (dev, MEM_RD_ADDR_REG_OFF, (u32) addr); - wr_regl (dev, MEM_RD_ADDR_REG_OFF, (addr - (HDW *) 0) * sizeof(HDW)); - return rd_regl (dev, MEMORY_PORT_OFF); -} - -static inline void wr_framer (const hrz_dev * dev, u32 addr, u32 data) { - wr_regl (dev, MEM_WR_ADDR_REG_OFF, (u32) addr | 0x80000000); - wr_regl (dev, MEMORY_PORT_OFF, data); -} - -static inline u32 rd_framer (const hrz_dev * dev, u32 addr) { - wr_regl (dev, MEM_RD_ADDR_REG_OFF, (u32) addr | 0x80000000); - return rd_regl (dev, MEMORY_PORT_OFF); -} - -/********** specialised access functions **********/ - -/* RX */ - -static inline void FLUSH_RX_CHANNEL (hrz_dev * dev, u16 channel) { - wr_regw (dev, RX_CHANNEL_PORT_OFF, FLUSH_CHANNEL | channel); - return; -} - -static void WAIT_FLUSH_RX_COMPLETE (hrz_dev * dev) { - while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & FLUSH_CHANNEL) - ; - return; -} - -static inline void SELECT_RX_CHANNEL (hrz_dev * dev, u16 channel) { - wr_regw (dev, RX_CHANNEL_PORT_OFF, channel); - return; -} - -static void WAIT_UPDATE_COMPLETE (hrz_dev * dev) { - while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & RX_CHANNEL_UPDATE_IN_PROGRESS) - ; - return; -} - -/* TX */ - -static inline void SELECT_TX_CHANNEL (hrz_dev * dev, u16 tx_channel) { - wr_regl (dev, TX_CHANNEL_PORT_OFF, tx_channel); - return; -} - -/* Update or query one configuration parameter of a particular channel. */ - -static inline void update_tx_channel_config (hrz_dev * dev, short chan, u8 mode, u16 value) { - wr_regw (dev, TX_CHANNEL_CONFIG_COMMAND_OFF, - chan * TX_CHANNEL_CONFIG_MULT | mode); - wr_regw (dev, TX_CHANNEL_CONFIG_DATA_OFF, value); - return; -} - -/********** dump functions **********/ - -static inline void dump_skb (char * prefix, unsigned int vc, struct sk_buff * skb) { -#ifdef DEBUG_HORIZON - unsigned int i; - unsigned char * data = skb->data; - PRINTDB (DBG_DATA, "%s(%u) ", prefix, vc); - for (i=0; i<skb->len && i < 256;i++) - PRINTDM (DBG_DATA, "%02x ", data[i]); - PRINTDE (DBG_DATA,""); -#else - (void) prefix; - (void) vc; - (void) skb; -#endif - return; -} - -static inline void dump_regs (hrz_dev * dev) { -#ifdef DEBUG_HORIZON - PRINTD (DBG_REGS, "CONTROL 0: %#x", rd_regl (dev, CONTROL_0_REG)); - PRINTD (DBG_REGS, "RX CONFIG: %#x", rd_regw (dev, RX_CONFIG_OFF)); - PRINTD (DBG_REGS, "TX CONFIG: %#x", rd_regw (dev, TX_CONFIG_OFF)); - PRINTD (DBG_REGS, "TX STATUS: %#x", rd_regw (dev, TX_STATUS_OFF)); - PRINTD (DBG_REGS, "IRQ ENBLE: %#x", rd_regl (dev, INT_ENABLE_REG_OFF)); - PRINTD (DBG_REGS, "IRQ SORCE: %#x", rd_regl (dev, INT_SOURCE_REG_OFF)); -#else - (void) dev; -#endif - return; -} - -static inline void dump_framer (hrz_dev * dev) { -#ifdef DEBUG_HORIZON - unsigned int i; - PRINTDB (DBG_REGS, "framer registers:"); - for (i = 0; i < 0x10; ++i) - PRINTDM (DBG_REGS, " %02x", rd_framer (dev, i)); - PRINTDE (DBG_REGS,""); -#else - (void) dev; -#endif - return; -} - -/********** VPI/VCI <-> (RX) channel conversions **********/ - -/* RX channels are 10 bit integers, these fns are quite paranoid */ - -static inline int vpivci_to_channel (u16 * channel, const short vpi, const int vci) { - unsigned short vci_bits = 10 - vpi_bits; - if (0 <= vpi && vpi < 1<<vpi_bits && 0 <= vci && vci < 1<<vci_bits) { - *channel = vpi<<vci_bits | vci; - return *channel ? 0 : -EINVAL; - } - return -EINVAL; -} - -/********** decode RX queue entries **********/ - -static inline u16 rx_q_entry_to_length (u32 x) { - return x & RX_Q_ENTRY_LENGTH_MASK; -} - -static inline u16 rx_q_entry_to_rx_channel (u32 x) { - return (x>>RX_Q_ENTRY_CHANNEL_SHIFT) & RX_CHANNEL_MASK; -} - -/* Cell Transmit Rate Values - * - * the cell transmit rate (cells per sec) can be set to a variety of - * different values by specifying two parameters: a timer preload from - * 1 to 16 (stored as 0 to 15) and a clock divider (2 to the power of - * an exponent from 0 to 14; the special value 15 disables the timer). - * - * cellrate = baserate / (preload * 2^divider) - * - * The maximum cell rate that can be specified is therefore just the - * base rate. Halving the preload is equivalent to adding 1 to the - * divider and so values 1 to 8 of the preload are redundant except - * in the case of a maximal divider (14). - * - * Given a desired cell rate, an algorithm to determine the preload - * and divider is: - * - * a) x = baserate / cellrate, want p * 2^d = x (as far as possible) - * b) if x > 16 * 2^14 then set p = 16, d = 14 (min rate), done - * if x <= 16 then set p = x, d = 0 (high rates), done - * c) now have 16 < x <= 2^18, or 1 < x/16 <= 2^14 and we want to - * know n such that 2^(n-1) < x/16 <= 2^n, so slide a bit until - * we find the range (n will be between 1 and 14), set d = n - * d) Also have 8 < x/2^n <= 16, so set p nearest x/2^n - * - * The algorithm used below is a minor variant of the above. - * - * The base rate is derived from the oscillator frequency (Hz) using a - * fixed divider: - * - * baserate = freq / 32 in the case of some Unknown Card - * baserate = freq / 8 in the case of the Horizon 25 - * baserate = freq / 8 in the case of the Horizon Ultra 155 - * - * The Horizon cards have oscillators and base rates as follows: - * - * Card Oscillator Base Rate - * Unknown Card 33 MHz 1.03125 MHz (33 MHz = PCI freq) - * Horizon 25 32 MHz 4 MHz - * Horizon Ultra 155 40 MHz 5 MHz - * - * The following defines give the base rates in Hz. These were - * previously a factor of 100 larger, no doubt someone was using - * cps*100. - */ - -#define BR_UKN 1031250l -#define BR_HRZ 4000000l -#define BR_ULT 5000000l - -// d is an exponent -#define CR_MIND 0 -#define CR_MAXD 14 - -// p ranges from 1 to a power of 2 -#define CR_MAXPEXP 4 - -static int make_rate (const hrz_dev * dev, u32 c, rounding r, - u16 * bits, unsigned int * actual) -{ - // note: rounding the rate down means rounding 'p' up - const unsigned long br = test_bit(ultra, &dev->flags) ? BR_ULT : BR_HRZ; - - u32 div = CR_MIND; - u32 pre; - - // br_exp and br_man are used to avoid overflowing (c*maxp*2^d) in - // the tests below. We could think harder about exact possibilities - // of failure... - - unsigned long br_man = br; - unsigned int br_exp = 0; - - PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c, - r == round_up ? "up" : r == round_down ? "down" : "nearest"); - - // avoid div by zero - if (!c) { - PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!"); - return -EINVAL; - } - - while (br_exp < CR_MAXPEXP + CR_MIND && (br_man % 2 == 0)) { - br_man = br_man >> 1; - ++br_exp; - } - // (br >>br_exp) <<br_exp == br and - // br_exp <= CR_MAXPEXP+CR_MIND - - if (br_man <= (c << (CR_MAXPEXP+CR_MIND-br_exp))) { - // Equivalent to: B <= (c << (MAXPEXP+MIND)) - // take care of rounding - switch (r) { - case round_down: - pre = DIV_ROUND_UP(br, c<<div); - // but p must be non-zero - if (!pre) - pre = 1; - break; - case round_nearest: - pre = DIV_ROUND_CLOSEST(br, c<<div); - // but p must be non-zero - if (!pre) - pre = 1; - break; - default: /* round_up */ - pre = br/(c<<div); - // but p must be non-zero - if (!pre) - return -EINVAL; - } - PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div); - goto got_it; - } - - // at this point we have - // d == MIND and (c << (MAXPEXP+MIND)) < B - while (div < CR_MAXD) { - div++; - if (br_man <= (c << (CR_MAXPEXP+div-br_exp))) { - // Equivalent to: B <= (c << (MAXPEXP+d)) - // c << (MAXPEXP+d-1) < B <= c << (MAXPEXP+d) - // 1 << (MAXPEXP-1) < B/2^d/c <= 1 << MAXPEXP - // MAXP/2 < B/c2^d <= MAXP - // take care of rounding - switch (r) { - case round_down: - pre = DIV_ROUND_UP(br, c<<div); - break; - case round_nearest: - pre = DIV_ROUND_CLOSEST(br, c<<div); - break; - default: /* round_up */ - pre = br/(c<<div); - } - PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div); - goto got_it; - } - } - // at this point we have - // d == MAXD and (c << (MAXPEXP+MAXD)) < B - // but we cannot go any higher - // take care of rounding - if (r == round_down) - return -EINVAL; - pre = 1 << CR_MAXPEXP; - PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div); -got_it: - // paranoia - if (div > CR_MAXD || (!pre) || pre > 1<<CR_MAXPEXP) { - PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u", - div, pre); - return -EINVAL; - } else { - if (bits) - *bits = (div<<CLOCK_SELECT_SHIFT) | (pre-1); - if (actual) { - *actual = DIV_ROUND_UP(br, pre<<div); - PRINTD (DBG_QOS, "actual rate: %u", *actual); - } - return 0; - } -} - -static int make_rate_with_tolerance (const hrz_dev * dev, u32 c, rounding r, unsigned int tol, - u16 * bit_pattern, unsigned int * actual) { - unsigned int my_actual; - - PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u", - c, (r == round_up) ? "up" : (r == round_down) ? "down" : "nearest", tol); - - if (!actual) - // actual rate is not returned - actual = &my_actual; - - if (make_rate (dev, c, round_nearest, bit_pattern, actual)) - // should never happen as round_nearest always succeeds - return -1; - - if (c - tol <= *actual && *actual <= c + tol) - // within tolerance - return 0; - else - // intolerant, try rounding instead - return make_rate (dev, c, r, bit_pattern, actual); -} - -/********** Listen on a VC **********/ - -static int hrz_open_rx (hrz_dev * dev, u16 channel) { - // is there any guarantee that we don't get two simulataneous - // identical calls of this function from different processes? yes - // rate_lock - unsigned long flags; - u32 channel_type; // u16? - - u16 buf_ptr = RX_CHANNEL_IDLE; - - rx_ch_desc * rx_desc = &memmap->rx_descs[channel]; - - PRINTD (DBG_FLOW, "hrz_open_rx %x", channel); - - spin_lock_irqsave (&dev->mem_lock, flags); - channel_type = rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK; - spin_unlock_irqrestore (&dev->mem_lock, flags); - - // very serious error, should never occur - if (channel_type != RX_CHANNEL_DISABLED) { - PRINTD (DBG_ERR|DBG_VCC, "RX channel for VC already open"); - return -EBUSY; // clean up? - } - - // Give back spare buffer - if (dev->noof_spare_buffers) { - buf_ptr = dev->spare_buffers[--dev->noof_spare_buffers]; - PRINTD (DBG_VCC, "using a spare buffer: %u", buf_ptr); - // should never occur - if (buf_ptr == RX_CHANNEL_DISABLED || buf_ptr == RX_CHANNEL_IDLE) { - // but easy to recover from - PRINTD (DBG_ERR|DBG_VCC, "bad spare buffer pointer, using IDLE"); - buf_ptr = RX_CHANNEL_IDLE; - } - } else { - PRINTD (DBG_VCC, "using IDLE buffer pointer"); - } - - // Channel is currently disabled so change its status to idle - - // do we really need to save the flags again? - spin_lock_irqsave (&dev->mem_lock, flags); - - wr_mem (dev, &rx_desc->wr_buf_type, - buf_ptr | CHANNEL_TYPE_AAL5 | FIRST_CELL_OF_AAL5_FRAME); - if (buf_ptr != RX_CHANNEL_IDLE) - wr_mem (dev, &rx_desc->rd_buf_type, buf_ptr); - - spin_unlock_irqrestore (&dev->mem_lock, flags); - - // rxer->rate = make_rate (qos->peak_cells); - - PRINTD (DBG_FLOW, "hrz_open_rx ok"); - - return 0; -} - -#if 0 -/********** change vc rate for a given vc **********/ - -static void hrz_change_vc_qos (ATM_RXER * rxer, MAAL_QOS * qos) { - rxer->rate = make_rate (qos->peak_cells); -} -#endif - -/********** free an skb (as per ATM device driver documentation) **********/ - -static void hrz_kfree_skb (struct sk_buff * skb) { - if (ATM_SKB(skb)->vcc->pop) { - ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb); - } else { - dev_kfree_skb_any (skb); - } -} - -/********** cancel listen on a VC **********/ - -static void hrz_close_rx (hrz_dev * dev, u16 vc) { - unsigned long flags; - - u32 value; - - u32 r1, r2; - - rx_ch_desc * rx_desc = &memmap->rx_descs[vc]; - - int was_idle = 0; - - spin_lock_irqsave (&dev->mem_lock, flags); - value = rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK; - spin_unlock_irqrestore (&dev->mem_lock, flags); - - if (value == RX_CHANNEL_DISABLED) { - // I suppose this could happen once we deal with _NONE traffic properly - PRINTD (DBG_VCC, "closing VC: RX channel %u already disabled", vc); - return; - } - if (value == RX_CHANNEL_IDLE) - was_idle = 1; - - spin_lock_irqsave (&dev->mem_lock, flags); - - for (;;) { - wr_mem (dev, &rx_desc->wr_buf_type, RX_CHANNEL_DISABLED); - - if ((rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK) == RX_CHANNEL_DISABLED) - break; - - was_idle = 0; - } - - if (was_idle) { - spin_unlock_irqrestore (&dev->mem_lock, flags); - return; - } - - WAIT_FLUSH_RX_COMPLETE(dev); - - // XXX Is this all really necessary? We can rely on the rx_data_av - // handler to discard frames that remain queued for delivery. If the - // worry is that immediately reopening the channel (perhaps by a - // different process) may cause some data to be mis-delivered then - // there may still be a simpler solution (such as busy-waiting on - // rx_busy once the channel is disabled or before a new one is - // opened - does this leave any holes?). Arguably setting up and - // tearing down the TX and RX halves of each virtual circuit could - // most safely be done within ?x_busy protected regions. - - // OK, current changes are that Simon's marker is disabled and we DO - // look for NULL rxer elsewhere. The code here seems flush frames - // and then remember the last dead cell belonging to the channel - // just disabled - the cell gets relinked at the next vc_open. - // However, when all VCs are closed or only a few opened there are a - // handful of buffers that are unusable. - - // Does anyone feel like documenting spare_buffers properly? - // Does anyone feel like fixing this in a nicer way? - - // Flush any data which is left in the channel - for (;;) { - // Change the rx channel port to something different to the RX - // channel we are trying to close to force Horizon to flush the rx - // channel read and write pointers. - - u16 other = vc^(RX_CHANS/2); - - SELECT_RX_CHANNEL (dev, other); - WAIT_UPDATE_COMPLETE (dev); - - r1 = rd_mem (dev, &rx_desc->rd_buf_type); - - // Select this RX channel. Flush doesn't seem to work unless we - // select an RX channel before hand - - SELECT_RX_CHANNEL (dev, vc); - WAIT_UPDATE_COMPLETE (dev); - - // Attempt to flush a frame on this RX channel - - FLUSH_RX_CHANNEL (dev, vc); - WAIT_FLUSH_RX_COMPLETE (dev); - - // Force Horizon to flush rx channel read and write pointers as before - - SELECT_RX_CHANNEL (dev, other); - WAIT_UPDATE_COMPLETE (dev); - - r2 = rd_mem (dev, &rx_desc->rd_buf_type); - - PRINTD (DBG_VCC|DBG_RX, "r1 = %u, r2 = %u", r1, r2); - - if (r1 == r2) { - dev->spare_buffers[dev->noof_spare_buffers++] = (u16)r1; - break; - } - } - -#if 0 - { - rx_q_entry * wr_ptr = &memmap->rx_q_entries[rd_regw (dev, RX_QUEUE_WR_PTR_OFF)]; - rx_q_entry * rd_ptr = dev->rx_q_entry; - - PRINTD (DBG_VCC|DBG_RX, "rd_ptr = %u, wr_ptr = %u", rd_ptr, wr_ptr); - - while (rd_ptr != wr_ptr) { - u32 x = rd_mem (dev, (HDW *) rd_ptr); - - if (vc == rx_q_entry_to_rx_channel (x)) { - x |= SIMONS_DODGEY_MARKER; - - PRINTD (DBG_RX|DBG_VCC|DBG_WARN, "marking a frame as dodgey"); - - wr_mem (dev, (HDW *) rd_ptr, x); - } - - if (rd_ptr == dev->rx_q_wrap) - rd_ptr = dev->rx_q_reset; - else - rd_ptr++; - } - } -#endif - - spin_unlock_irqrestore (&dev->mem_lock, flags); - - return; -} - -/********** schedule RX transfers **********/ - -// Note on tail recursion: a GCC developer said that it is not likely -// to be fixed soon, so do not define TAILRECUSRIONWORKS unless you -// are sure it does as you may otherwise overflow the kernel stack. - -// giving this fn a return value would help GCC, allegedly - -static void rx_schedule (hrz_dev * dev, int irq) { - unsigned int rx_bytes; - - int pio_instead = 0; -#ifndef TAILRECURSIONWORKS - pio_instead = 1; - while (pio_instead) { -#endif - // bytes waiting for RX transfer - rx_bytes = dev->rx_bytes; - -#if 0 - spin_count = 0; - while (rd_regl (dev, MASTER_RX_COUNT_REG_OFF)) { - PRINTD (DBG_RX|DBG_WARN, "RX error: other PCI Bus Master RX still in progress!"); - if (++spin_count > 10) { - PRINTD (DBG_RX|DBG_ERR, "spun out waiting PCI Bus Master RX completion"); - wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0); - clear_bit (rx_busy, &dev->flags); - hrz_kfree_skb (dev->rx_skb); - return; - } - } -#endif - - // this code follows the TX code but (at the moment) there is only - // one region - the skb itself. I don't know if this will change, - // but it doesn't hurt to have the code here, disabled. - - if (rx_bytes) { - // start next transfer within same region - if (rx_bytes <= MAX_PIO_COUNT) { - PRINTD (DBG_RX|DBG_BUS, "(pio)"); - pio_instead = 1; - } - if (rx_bytes <= MAX_TRANSFER_COUNT) { - PRINTD (DBG_RX|DBG_BUS, "(simple or last multi)"); - dev->rx_bytes = 0; - } else { - PRINTD (DBG_RX|DBG_BUS, "(continuing multi)"); - dev->rx_bytes = rx_bytes - MAX_TRANSFER_COUNT; - rx_bytes = MAX_TRANSFER_COUNT; - } - } else { - // rx_bytes == 0 -- we're between regions - // regions remaining to transfer -#if 0 - unsigned int rx_regions = dev->rx_regions; -#else - unsigned int rx_regions = 0; -#endif - - if (rx_regions) { -#if 0 - // start a new region - dev->rx_addr = dev->rx_iovec->iov_base; - rx_bytes = dev->rx_iovec->iov_len; - ++dev->rx_iovec; - dev->rx_regions = rx_regions - 1; - - if (rx_bytes <= MAX_PIO_COUNT) { - PRINTD (DBG_RX|DBG_BUS, "(pio)"); - pio_instead = 1; - } - if (rx_bytes <= MAX_TRANSFER_COUNT) { - PRINTD (DBG_RX|DBG_BUS, "(full region)"); - dev->rx_bytes = 0; - } else { - PRINTD (DBG_RX|DBG_BUS, "(start multi region)"); - dev->rx_bytes = rx_bytes - MAX_TRANSFER_COUNT; - rx_bytes = MAX_TRANSFER_COUNT; - } -#endif - } else { - // rx_regions == 0 - // that's all folks - end of frame - struct sk_buff * skb = dev->rx_skb; - // dev->rx_iovec = 0; - - FLUSH_RX_CHANNEL (dev, dev->rx_channel); - - dump_skb ("<<<", dev->rx_channel, skb); - - PRINTD (DBG_RX|DBG_SKB, "push %p %u", skb->data, skb->len); - - { - struct atm_vcc * vcc = ATM_SKB(skb)->vcc; - // VC layer stats - atomic_inc(&vcc->stats->rx); - __net_timestamp(skb); - // end of our responsibility - vcc->push (vcc, skb); - } - } - } - - // note: writing RX_COUNT clears any interrupt condition - if (rx_bytes) { - if (pio_instead) { - if (irq) - wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0); - rds_regb (dev, DATA_PORT_OFF, dev->rx_addr, rx_bytes); - } else { - wr_regl (dev, MASTER_RX_ADDR_REG_OFF, virt_to_bus (dev->rx_addr)); - wr_regl (dev, MASTER_RX_COUNT_REG_OFF, rx_bytes); - } - dev->rx_addr += rx_bytes; - } else { - if (irq) - wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0); - // allow another RX thread to start - YELLOW_LED_ON(dev); - clear_bit (rx_busy, &dev->flags); - PRINTD (DBG_RX, "cleared rx_busy for dev %p", dev); - } - -#ifdef TAILRECURSIONWORKS - // and we all bless optimised tail calls - if (pio_instead) - return rx_schedule (dev, 0); - return; -#else - // grrrrrrr! - irq = 0; - } - return; -#endif -} - -/********** handle RX bus master complete events **********/ - -static void rx_bus_master_complete_handler (hrz_dev * dev) { - if (test_bit (rx_busy, &dev->flags)) { - rx_schedule (dev, 1); - } else { - PRINTD (DBG_RX|DBG_ERR, "unexpected RX bus master completion"); - // clear interrupt condition on adapter - wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0); - } - return; -} - -/********** (queue to) become the next TX thread **********/ - -static int tx_hold (hrz_dev * dev) { - PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags); - wait_event_interruptible(dev->tx_queue, (!test_and_set_bit(tx_busy, &dev->flags))); - PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags); - if (signal_pending (current)) - return -1; - PRINTD (DBG_TX, "set tx_busy for dev %p", dev); - return 0; -} - -/********** allow another TX thread to start **********/ - -static inline void tx_release (hrz_dev * dev) { - clear_bit (tx_busy, &dev->flags); - PRINTD (DBG_TX, "cleared tx_busy for dev %p", dev); - wake_up_interruptible (&dev->tx_queue); -} - -/********** schedule TX transfers **********/ - -static void tx_schedule (hrz_dev * const dev, int irq) { - unsigned int tx_bytes; - - int append_desc = 0; - - int pio_instead = 0; -#ifndef TAILRECURSIONWORKS - pio_instead = 1; - while (pio_instead) { -#endif - // bytes in current region waiting for TX transfer - tx_bytes = dev->tx_bytes; - -#if 0 - spin_count = 0; - while (rd_regl (dev, MASTER_TX_COUNT_REG_OFF)) { - PRINTD (DBG_TX|DBG_WARN, "TX error: other PCI Bus Master TX still in progress!"); - if (++spin_count > 10) { - PRINTD (DBG_TX|DBG_ERR, "spun out waiting PCI Bus Master TX completion"); - wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0); - tx_release (dev); - hrz_kfree_skb (dev->tx_skb); - return; - } - } -#endif - - if (tx_bytes) { - // start next transfer within same region - if (!test_bit (ultra, &dev->flags) || tx_bytes <= MAX_PIO_COUNT) { - PRINTD (DBG_TX|DBG_BUS, "(pio)"); - pio_instead = 1; - } - if (tx_bytes <= MAX_TRANSFER_COUNT) { - PRINTD (DBG_TX|DBG_BUS, "(simple or last multi)"); - if (!dev->tx_iovec) { - // end of last region - append_desc = 1; - } - dev->tx_bytes = 0; - } else { - PRINTD (DBG_TX|DBG_BUS, "(continuing multi)"); - dev->tx_bytes = tx_bytes - MAX_TRANSFER_COUNT; - tx_bytes = MAX_TRANSFER_COUNT; - } - } else { - // tx_bytes == 0 -- we're between regions - // regions remaining to transfer - unsigned int tx_regions = dev->tx_regions; - - if (tx_regions) { - // start a new region - dev->tx_addr = dev->tx_iovec->iov_base; - tx_bytes = dev->tx_iovec->iov_len; - ++dev->tx_iovec; - dev->tx_regions = tx_regions - 1; - - if (!test_bit (ultra, &dev->flags) || tx_bytes <= MAX_PIO_COUNT) { - PRINTD (DBG_TX|DBG_BUS, "(pio)"); - pio_instead = 1; - } - if (tx_bytes <= MAX_TRANSFER_COUNT) { - PRINTD (DBG_TX|DBG_BUS, "(full region)"); - dev->tx_bytes = 0; - } else { - PRINTD (DBG_TX|DBG_BUS, "(start multi region)"); - dev->tx_bytes = tx_bytes - MAX_TRANSFER_COUNT; - tx_bytes = MAX_TRANSFER_COUNT; - } - } else { - // tx_regions == 0 - // that's all folks - end of frame - struct sk_buff * skb = dev->tx_skb; - dev->tx_iovec = NULL; - - // VC layer stats - atomic_inc(&ATM_SKB(skb)->vcc->stats->tx); - - // free the skb - hrz_kfree_skb (skb); - } - } - - // note: writing TX_COUNT clears any interrupt condition - if (tx_bytes) { - if (pio_instead) { - if (irq) - wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0); - wrs_regb (dev, DATA_PORT_OFF, dev->tx_addr, tx_bytes); - if (append_desc) - wr_regl (dev, TX_DESCRIPTOR_PORT_OFF, cpu_to_be32 (dev->tx_skb->len)); - } else { - wr_regl (dev, MASTER_TX_ADDR_REG_OFF, virt_to_bus (dev->tx_addr)); - if (append_desc) - wr_regl (dev, TX_DESCRIPTOR_REG_OFF, cpu_to_be32 (dev->tx_skb->len)); - wr_regl (dev, MASTER_TX_COUNT_REG_OFF, - append_desc - ? tx_bytes | MASTER_TX_AUTO_APPEND_DESC - : tx_bytes); - } - dev->tx_addr += tx_bytes; - } else { - if (irq) - wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0); - YELLOW_LED_ON(dev); - tx_release (dev); - } - -#ifdef TAILRECURSIONWORKS - // and we all bless optimised tail calls - if (pio_instead) - return tx_schedule (dev, 0); - return; -#else - // grrrrrrr! - irq = 0; - } - return; -#endif -} - -/********** handle TX bus master complete events **********/ - -static void tx_bus_master_complete_handler (hrz_dev * dev) { - if (test_bit (tx_busy, &dev->flags)) { - tx_schedule (dev, 1); - } else { - PRINTD (DBG_TX|DBG_ERR, "unexpected TX bus master completion"); - // clear interrupt condition on adapter - wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0); - } - return; -} - -/********** move RX Q pointer to next item in circular buffer **********/ - -// called only from IRQ sub-handler -static u32 rx_queue_entry_next (hrz_dev * dev) { - u32 rx_queue_entry; - spin_lock (&dev->mem_lock); - rx_queue_entry = rd_mem (dev, &dev->rx_q_entry->entry); - if (dev->rx_q_entry == dev->rx_q_wrap) - dev->rx_q_entry = dev->rx_q_reset; - else - dev->rx_q_entry++; - wr_regw (dev, RX_QUEUE_RD_PTR_OFF, dev->rx_q_entry - dev->rx_q_reset); - spin_unlock (&dev->mem_lock); - return rx_queue_entry; -} - -/********** handle RX data received by device **********/ - -// called from IRQ handler -static void rx_data_av_handler (hrz_dev * dev) { - u32 rx_queue_entry; - u32 rx_queue_entry_flags; - u16 rx_len; - u16 rx_channel; - - PRINTD (DBG_FLOW, "hrz_data_av_handler"); - - // try to grab rx lock (not possible during RX bus mastering) - if (test_and_set_bit (rx_busy, &dev->flags)) { - PRINTD (DBG_RX, "locked out of rx lock"); - return; - } - PRINTD (DBG_RX, "set rx_busy for dev %p", dev); - // lock is cleared if we fail now, o/w after bus master completion - - YELLOW_LED_OFF(dev); - - rx_queue_entry = rx_queue_entry_next (dev); - - rx_len = rx_q_entry_to_length (rx_queue_entry); - rx_channel = rx_q_entry_to_rx_channel (rx_queue_entry); - - WAIT_FLUSH_RX_COMPLETE (dev); - - SELECT_RX_CHANNEL (dev, rx_channel); - - PRINTD (DBG_RX, "rx_queue_entry is: %#x", rx_queue_entry); - rx_queue_entry_flags = rx_queue_entry & (RX_CRC_32_OK|RX_COMPLETE_FRAME|SIMONS_DODGEY_MARKER); - - if (!rx_len) { - // (at least) bus-mastering breaks if we try to handle a - // zero-length frame, besides AAL5 does not support them - PRINTK (KERN_ERR, "zero-length frame!"); - rx_queue_entry_flags &= ~RX_COMPLETE_FRAME; - } - - if (rx_queue_entry_flags & SIMONS_DODGEY_MARKER) { - PRINTD (DBG_RX|DBG_ERR, "Simon's marker detected!"); - } - if (rx_queue_entry_flags == (RX_CRC_32_OK | RX_COMPLETE_FRAME)) { - struct atm_vcc * atm_vcc; - - PRINTD (DBG_RX, "got a frame on rx_channel %x len %u", rx_channel, rx_len); - - atm_vcc = dev->rxer[rx_channel]; - // if no vcc is assigned to this channel, we should drop the frame - // (is this what SIMONS etc. was trying to achieve?) - - if (atm_vcc) { - - if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) { - - if (rx_len <= atm_vcc->qos.rxtp.max_sdu) { - - struct sk_buff * skb = atm_alloc_charge (atm_vcc, rx_len, GFP_ATOMIC); - if (skb) { - // remember this so we can push it later - dev->rx_skb = skb; - // remember this so we can flush it later - dev->rx_channel = rx_channel; - - // prepare socket buffer - skb_put (skb, rx_len); - ATM_SKB(skb)->vcc = atm_vcc; - - // simple transfer - // dev->rx_regions = 0; - // dev->rx_iovec = 0; - dev->rx_bytes = rx_len; - dev->rx_addr = skb->data; - PRINTD (DBG_RX, "RX start simple transfer (addr %p, len %d)", - skb->data, rx_len); - - // do the business - rx_schedule (dev, 0); - return; - - } else { - PRINTD (DBG_SKB|DBG_WARN, "failed to get skb"); - } - - } else { - PRINTK (KERN_INFO, "frame received on TX-only VC %x", rx_channel); - // do we count this? - } - - } else { - PRINTK (KERN_WARNING, "dropped over-size frame"); - // do we count this? - } - - } else { - PRINTD (DBG_WARN|DBG_VCC|DBG_RX, "no VCC for this frame (VC closed)"); - // do we count this? - } - - } else { - // Wait update complete ? SPONG - } - - // RX was aborted - YELLOW_LED_ON(dev); - - FLUSH_RX_CHANNEL (dev,rx_channel); - clear_bit (rx_busy, &dev->flags); - - return; -} - -/********** interrupt handler **********/ - -static irqreturn_t interrupt_handler(int irq, void *dev_id) -{ - hrz_dev *dev = dev_id; - u32 int_source; - unsigned int irq_ok; - - PRINTD (DBG_FLOW, "interrupt_handler: %p", dev_id); - - // definitely for us - irq_ok = 0; - while ((int_source = rd_regl (dev, INT_SOURCE_REG_OFF) - & INTERESTING_INTERRUPTS)) { - // In the interests of fairness, the handlers below are - // called in sequence and without immediate return to the head of - // the while loop. This is only of issue for slow hosts (or when - // debugging messages are on). Really slow hosts may find a fast - // sender keeps them permanently in the IRQ handler. :( - - // (only an issue for slow hosts) RX completion goes before - // rx_data_av as the former implies rx_busy and so the latter - // would just abort. If it reschedules another transfer - // (continuing the same frame) then it will not clear rx_busy. - - // (only an issue for slow hosts) TX completion goes before RX - // data available as it is a much shorter routine - there is the - // chance that any further transfers it schedules will be complete - // by the time of the return to the head of the while loop - - if (int_source & RX_BUS_MASTER_COMPLETE) { - ++irq_ok; - PRINTD (DBG_IRQ|DBG_BUS|DBG_RX, "rx_bus_master_complete asserted"); - rx_bus_master_complete_handler (dev); - } - if (int_source & TX_BUS_MASTER_COMPLETE) { - ++irq_ok; - PRINTD (DBG_IRQ|DBG_BUS|DBG_TX, "tx_bus_master_complete asserted"); - tx_bus_master_complete_handler (dev); - } - if (int_source & RX_DATA_AV) { - ++irq_ok; - PRINTD (DBG_IRQ|DBG_RX, "rx_data_av asserted"); - rx_data_av_handler (dev); - } - } - if (irq_ok) { - PRINTD (DBG_IRQ, "work done: %u", irq_ok); - } else { - PRINTD (DBG_IRQ|DBG_WARN, "spurious interrupt source: %#x", int_source); - } - - PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id); - if (irq_ok) - return IRQ_HANDLED; - return IRQ_NONE; -} - -/********** housekeeping **********/ - -static void do_housekeeping (struct timer_list *t) { - // just stats at the moment - hrz_dev * dev = from_timer(dev, t, housekeeping); - - // collect device-specific (not driver/atm-linux) stats here - dev->tx_cell_count += rd_regw (dev, TX_CELL_COUNT_OFF); - dev->rx_cell_count += rd_regw (dev, RX_CELL_COUNT_OFF); - dev->hec_error_count += rd_regw (dev, HEC_ERROR_COUNT_OFF); - dev->unassigned_cell_count += rd_regw (dev, UNASSIGNED_CELL_COUNT_OFF); - - mod_timer (&dev->housekeeping, jiffies + HZ/10); - - return; -} - -/********** find an idle channel for TX and set it up **********/ - -// called with tx_busy set -static short setup_idle_tx_channel (hrz_dev * dev, hrz_vcc * vcc) { - unsigned short idle_channels; - short tx_channel = -1; - unsigned int spin_count; - PRINTD (DBG_FLOW|DBG_TX, "setup_idle_tx_channel %p", dev); - - // better would be to fail immediately, the caller can then decide whether - // to wait or drop (depending on whether this is UBR etc.) - spin_count = 0; - while (!(idle_channels = rd_regw (dev, TX_STATUS_OFF) & IDLE_CHANNELS_MASK)) { - PRINTD (DBG_TX|DBG_WARN, "waiting for idle TX channel"); - // delay a bit here - if (++spin_count > 100) { - PRINTD (DBG_TX|DBG_ERR, "spun out waiting for idle TX channel"); - return -EBUSY; - } - } - - // got an idle channel - { - // tx_idle ensures we look for idle channels in RR order - int chan = dev->tx_idle; - - int keep_going = 1; - while (keep_going) { - if (idle_channels & (1<<chan)) { - tx_channel = chan; - keep_going = 0; - } - ++chan; - if (chan == TX_CHANS) - chan = 0; - } - - dev->tx_idle = chan; - } - - // set up the channel we found - { - // Initialise the cell header in the transmit channel descriptor - // a.k.a. prepare the channel and remember that we have done so. - - tx_ch_desc * tx_desc = &memmap->tx_descs[tx_channel]; - u32 rd_ptr; - u32 wr_ptr; - u16 channel = vcc->channel; - - unsigned long flags; - spin_lock_irqsave (&dev->mem_lock, flags); - - // Update the transmit channel record. - dev->tx_channel_record[tx_channel] = channel; - - // xBR channel - update_tx_channel_config (dev, tx_channel, RATE_TYPE_ACCESS, - vcc->tx_xbr_bits); - - // Update the PCR counter preload value etc. - update_tx_channel_config (dev, tx_channel, PCR_TIMER_ACCESS, - vcc->tx_pcr_bits); - -#if 0 - if (vcc->tx_xbr_bits == VBR_RATE_TYPE) { - // SCR timer - update_tx_channel_config (dev, tx_channel, SCR_TIMER_ACCESS, - vcc->tx_scr_bits); - - // Bucket size... - update_tx_channel_config (dev, tx_channel, BUCKET_CAPACITY_ACCESS, - vcc->tx_bucket_bits); - - // ... and fullness - update_tx_channel_config (dev, tx_channel, BUCKET_FULLNESS_ACCESS, - vcc->tx_bucket_bits); - } -#endif - - // Initialise the read and write buffer pointers - rd_ptr = rd_mem (dev, &tx_desc->rd_buf_type) & BUFFER_PTR_MASK; - wr_ptr = rd_mem (dev, &tx_desc->wr_buf_type) & BUFFER_PTR_MASK; - - // idle TX channels should have identical pointers - if (rd_ptr != wr_ptr) { - PRINTD (DBG_TX|DBG_ERR, "TX buffer pointers are broken!"); - // spin_unlock... return -E... - // I wonder if gcc would get rid of one of the pointer aliases - } - PRINTD (DBG_TX, "TX buffer pointers are: rd %x, wr %x.", - rd_ptr, wr_ptr); - - switch (vcc->aal) { - case aal0: - PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0"); - rd_ptr |= CHANNEL_TYPE_RAW_CELLS; - wr_ptr |= CHANNEL_TYPE_RAW_CELLS; - break; - case aal34: - PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34"); - rd_ptr |= CHANNEL_TYPE_AAL3_4; - wr_ptr |= CHANNEL_TYPE_AAL3_4; - break; - case aal5: - rd_ptr |= CHANNEL_TYPE_AAL5; - wr_ptr |= CHANNEL_TYPE_AAL5; - // Initialise the CRC - wr_mem (dev, &tx_desc->partial_crc, INITIAL_CRC); - break; - } - - wr_mem (dev, &tx_desc->rd_buf_type, rd_ptr); - wr_mem (dev, &tx_desc->wr_buf_type, wr_ptr); - - // Write the Cell Header - // Payload Type, CLP and GFC would go here if non-zero - wr_mem (dev, &tx_desc->cell_header, channel); - - spin_unlock_irqrestore (&dev->mem_lock, flags); - } - - return tx_channel; -} - -/********** send a frame **********/ - -static int hrz_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) { - unsigned int spin_count; - int free_buffers; - hrz_dev * dev = HRZ_DEV(atm_vcc->dev); - hrz_vcc * vcc = HRZ_VCC(atm_vcc); - u16 channel = vcc->channel; - - u32 buffers_required; - - /* signed for error return */ - short tx_channel; - - PRINTD (DBG_FLOW|DBG_TX, "hrz_send vc %x data %p len %u", - channel, skb->data, skb->len); - - dump_skb (">>>", channel, skb); - - if (atm_vcc->qos.txtp.traffic_class == ATM_NONE) { - PRINTK (KERN_ERR, "attempt to send on RX-only VC %x", channel); - hrz_kfree_skb (skb); - return -EIO; - } - - // don't understand this - ATM_SKB(skb)->vcc = atm_vcc; - - if (skb->len > atm_vcc->qos.txtp.max_sdu) { - PRINTK (KERN_ERR, "sk_buff length greater than agreed max_sdu, dropping..."); - hrz_kfree_skb (skb); - return -EIO; - } - - if (!channel) { - PRINTD (DBG_ERR|DBG_TX, "attempt to transmit on zero (rx_)channel"); - hrz_kfree_skb (skb); - return -EIO; - } - -#if 0 - { - // where would be a better place for this? housekeeping? - u16 status; - pci_read_config_word (dev->pci_dev, PCI_STATUS, &status); - if (status & PCI_STATUS_REC_MASTER_ABORT) { - PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)"); - status &= ~PCI_STATUS_REC_MASTER_ABORT; - pci_write_config_word (dev->pci_dev, PCI_STATUS, status); - if (test_bit (tx_busy, &dev->flags)) { - hrz_kfree_skb (dev->tx_skb); - tx_release (dev); - } - } - } -#endif - -#ifdef DEBUG_HORIZON - /* wey-hey! */ - if (channel == 1023) { - unsigned int i; - unsigned short d = 0; - char * s = skb->data; - if (*s++ == 'D') { - for (i = 0; i < 4; ++i) - d = (d << 4) | hex_to_bin(*s++); - PRINTK (KERN_INFO, "debug bitmap is now %hx", debug = d); - } - } -#endif - - // wait until TX is free and grab lock - if (tx_hold (dev)) { - hrz_kfree_skb (skb); - return -ERESTARTSYS; - } - - // Wait for enough space to be available in transmit buffer memory. - - // should be number of cells needed + 2 (according to hardware docs) - // = ((framelen+8)+47) / 48 + 2 - // = (framelen+7) / 48 + 3, hmm... faster to put addition inside XXX - buffers_required = (skb->len+(ATM_AAL5_TRAILER-1)) / ATM_CELL_PAYLOAD + 3; - - // replace with timer and sleep, add dev->tx_buffers_queue (max 1 entry) - spin_count = 0; - while ((free_buffers = rd_regw (dev, TX_FREE_BUFFER_COUNT_OFF)) < buffers_required) { - PRINTD (DBG_TX, "waiting for free TX buffers, got %d of %d", - free_buffers, buffers_required); - // what is the appropriate delay? implement a timeout? (depending on line speed?) - // mdelay (1); - // what happens if we kill (current_pid, SIGKILL) ? - schedule(); - if (++spin_count > 1000) { - PRINTD (DBG_TX|DBG_ERR, "spun out waiting for tx buffers, got %d of %d", - free_buffers, buffers_required); - tx_release (dev); - hrz_kfree_skb (skb); - return -ERESTARTSYS; - } - } - - // Select a channel to transmit the frame on. - if (channel == dev->last_vc) { - PRINTD (DBG_TX, "last vc hack: hit"); - tx_channel = dev->tx_last; - } else { - PRINTD (DBG_TX, "last vc hack: miss"); - // Are we currently transmitting this VC on one of the channels? - for (tx_channel = 0; tx_channel < TX_CHANS; ++tx_channel) - if (dev->tx_channel_record[tx_channel] == channel) { - PRINTD (DBG_TX, "vc already on channel: hit"); - break; - } - if (tx_channel == TX_CHANS) { - PRINTD (DBG_TX, "vc already on channel: miss"); - // Find and set up an idle channel. - tx_channel = setup_idle_tx_channel (dev, vcc); - if (tx_channel < 0) { - PRINTD (DBG_TX|DBG_ERR, "failed to get channel"); - tx_release (dev); - return tx_channel; - } - } - - PRINTD (DBG_TX, "got channel"); - SELECT_TX_CHANNEL(dev, tx_channel); - - dev->last_vc = channel; - dev->tx_last = tx_channel; - } - - PRINTD (DBG_TX, "using channel %u", tx_channel); - - YELLOW_LED_OFF(dev); - - // TX start transfer - - { - unsigned int tx_len = skb->len; - unsigned int tx_iovcnt = skb_shinfo(skb)->nr_frags; - // remember this so we can free it later - dev->tx_skb = skb; - - if (tx_iovcnt) { - // scatter gather transfer - dev->tx_regions = tx_iovcnt; - dev->tx_iovec = NULL; /* @@@ needs rewritten */ - dev->tx_bytes = 0; - PRINTD (DBG_TX|DBG_BUS, "TX start scatter-gather transfer (iovec %p, len %d)", - skb->data, tx_len); - tx_release (dev); - hrz_kfree_skb (skb); - return -EIO; - } else { - // simple transfer - dev->tx_regions = 0; - dev->tx_iovec = NULL; - dev->tx_bytes = tx_len; - dev->tx_addr = skb->data; - PRINTD (DBG_TX|DBG_BUS, "TX start simple transfer (addr %p, len %d)", - skb->data, tx_len); - } - - // and do the business - tx_schedule (dev, 0); - - } - - return 0; -} - -/********** reset a card **********/ - -static void hrz_reset (const hrz_dev * dev) { - u32 control_0_reg = rd_regl (dev, CONTROL_0_REG); - - // why not set RESET_HORIZON to one and wait for the card to - // reassert that bit as zero? Like so: - control_0_reg = control_0_reg & RESET_HORIZON; - wr_regl (dev, CONTROL_0_REG, control_0_reg); - while (control_0_reg & RESET_HORIZON) - control_0_reg = rd_regl (dev, CONTROL_0_REG); - - // old reset code retained: - wr_regl (dev, CONTROL_0_REG, control_0_reg | - RESET_ATM | RESET_RX | RESET_TX | RESET_HOST); - // just guessing here - udelay (1000); - - wr_regl (dev, CONTROL_0_REG, control_0_reg); -} - -/********** read the burnt in address **********/ - -static void WRITE_IT_WAIT (const hrz_dev *dev, u32 ctrl) -{ - wr_regl (dev, CONTROL_0_REG, ctrl); - udelay (5); -} - -static void CLOCK_IT (const hrz_dev *dev, u32 ctrl) -{ - // DI must be valid around rising SK edge - WRITE_IT_WAIT(dev, ctrl & ~SEEPROM_SK); - WRITE_IT_WAIT(dev, ctrl | SEEPROM_SK); -} - -static u16 read_bia(const hrz_dev *dev, u16 addr) -{ - u32 ctrl = rd_regl (dev, CONTROL_0_REG); - - const unsigned int addr_bits = 6; - const unsigned int data_bits = 16; - - unsigned int i; - - u16 res; - - ctrl &= ~(SEEPROM_CS | SEEPROM_SK | SEEPROM_DI); - WRITE_IT_WAIT(dev, ctrl); - - // wake Serial EEPROM and send 110 (READ) command - ctrl |= (SEEPROM_CS | SEEPROM_DI); - CLOCK_IT(dev, ctrl); - - ctrl |= SEEPROM_DI; - CLOCK_IT(dev, ctrl); - - ctrl &= ~SEEPROM_DI; - CLOCK_IT(dev, ctrl); - - for (i=0; i<addr_bits; i++) { - if (addr & (1 << (addr_bits-1))) - ctrl |= SEEPROM_DI; - else - ctrl &= ~SEEPROM_DI; - - CLOCK_IT(dev, ctrl); - - addr = addr << 1; - } - - // we could check that we have DO = 0 here - ctrl &= ~SEEPROM_DI; - - res = 0; - for (i=0;i<data_bits;i++) { - res = res >> 1; - - CLOCK_IT(dev, ctrl); - - if (rd_regl (dev, CONTROL_0_REG) & SEEPROM_DO) - res |= (1 << (data_bits-1)); - } - - ctrl &= ~(SEEPROM_SK | SEEPROM_CS); - WRITE_IT_WAIT(dev, ctrl); - - return res; -} - -/********** initialise a card **********/ - -static int hrz_init(hrz_dev *dev) -{ - int onefivefive; - - u16 chan; - - int buff_count; - - HDW * mem; - - cell_buf * tx_desc; - cell_buf * rx_desc; - - u32 ctrl; - - ctrl = rd_regl (dev, CONTROL_0_REG); - PRINTD (DBG_INFO, "ctrl0reg is %#x", ctrl); - onefivefive = ctrl & ATM_LAYER_STATUS; - - if (onefivefive) - printk (DEV_LABEL ": Horizon Ultra (at 155.52 MBps)"); - else - printk (DEV_LABEL ": Horizon (at 25 MBps)"); - - printk (":"); - // Reset the card to get everything in a known state - - printk (" reset"); - hrz_reset (dev); - - // Clear all the buffer memory - - printk (" clearing memory"); - - for (mem = (HDW *) memmap; mem < (HDW *) (memmap + 1); ++mem) - wr_mem (dev, mem, 0); - - printk (" tx channels"); - - // All transmit eight channels are set up as AAL5 ABR channels with - // a 16us cell spacing. Why? - - // Channel 0 gets the free buffer at 100h, channel 1 gets the free - // buffer at 110h etc. - - for (chan = 0; chan < TX_CHANS; ++chan) { - tx_ch_desc * tx_desc = &memmap->tx_descs[chan]; - cell_buf * buf = &memmap->inittxbufs[chan]; - - // initialise the read and write buffer pointers - wr_mem (dev, &tx_desc->rd_buf_type, BUF_PTR(buf)); - wr_mem (dev, &tx_desc->wr_buf_type, BUF_PTR(buf)); - - // set the status of the initial buffers to empty - wr_mem (dev, &buf->next, BUFF_STATUS_EMPTY); - } - - // Use space bufn3 at the moment for tx buffers - - printk (" tx buffers"); - - tx_desc = memmap->bufn3; - - wr_mem (dev, &memmap->txfreebufstart.next, BUF_PTR(tx_desc) | BUFF_STATUS_EMPTY); - - for (buff_count = 0; buff_count < BUFN3_SIZE-1; buff_count++) { - wr_mem (dev, &tx_desc->next, BUF_PTR(tx_desc+1) | BUFF_STATUS_EMPTY); - tx_desc++; - } - - wr_mem (dev, &tx_desc->next, BUF_PTR(&memmap->txfreebufend) | BUFF_STATUS_EMPTY); - - // Initialise the transmit free buffer count - wr_regw (dev, TX_FREE_BUFFER_COUNT_OFF, BUFN3_SIZE); - - printk (" rx channels"); - - // Initialise all of the receive channels to be AAL5 disabled with - // an interrupt threshold of 0 - - for (chan = 0; chan < RX_CHANS; ++chan) { - rx_ch_desc * rx_desc = &memmap->rx_descs[chan]; - - wr_mem (dev, &rx_desc->wr_buf_type, CHANNEL_TYPE_AAL5 | RX_CHANNEL_DISABLED); - } - - printk (" rx buffers"); - - // Use space bufn4 at the moment for rx buffers - - rx_desc = memmap->bufn4; - - wr_mem (dev, &memmap->rxfreebufstart.next, BUF_PTR(rx_desc) | BUFF_STATUS_EMPTY); - - for (buff_count = 0; buff_count < BUFN4_SIZE-1; buff_count++) { - wr_mem (dev, &rx_desc->next, BUF_PTR(rx_desc+1) | BUFF_STATUS_EMPTY); - - rx_desc++; - } - - wr_mem (dev, &rx_desc->next, BUF_PTR(&memmap->rxfreebufend) | BUFF_STATUS_EMPTY); - - // Initialise the receive free buffer count - wr_regw (dev, RX_FREE_BUFFER_COUNT_OFF, BUFN4_SIZE); - - // Initialize Horizons registers - - // TX config - wr_regw (dev, TX_CONFIG_OFF, - ABR_ROUND_ROBIN | TX_NORMAL_OPERATION | DRVR_DRVRBAR_ENABLE); - - // RX config. Use 10-x VC bits, x VP bits, non user cells in channel 0. - wr_regw (dev, RX_CONFIG_OFF, - DISCARD_UNUSED_VPI_VCI_BITS_SET | NON_USER_CELLS_IN_ONE_CHANNEL | vpi_bits); - - // RX line config - wr_regw (dev, RX_LINE_CONFIG_OFF, - LOCK_DETECT_ENABLE | FREQUENCY_DETECT_ENABLE | GXTALOUT_SELECT_DIV4); - - // Set the max AAL5 cell count to be just enough to contain the - // largest AAL5 frame that the user wants to receive - wr_regw (dev, MAX_AAL5_CELL_COUNT_OFF, - DIV_ROUND_UP(max_rx_size + ATM_AAL5_TRAILER, ATM_CELL_PAYLOAD)); - - // Enable receive - wr_regw (dev, RX_CONFIG_OFF, rd_regw (dev, RX_CONFIG_OFF) | RX_ENABLE); - - printk (" control"); - - // Drive the OE of the LEDs then turn the green LED on - ctrl |= GREEN_LED_OE | YELLOW_LED_OE | GREEN_LED | YELLOW_LED; - wr_regl (dev, CONTROL_0_REG, ctrl); - - // Test for a 155-capable card - - if (onefivefive) { - // Select 155 mode... make this a choice (or: how do we detect - // external line speed and switch?) - ctrl |= ATM_LAYER_SELECT; - wr_regl (dev, CONTROL_0_REG, ctrl); - - // test SUNI-lite vs SAMBA - - // Register 0x00 in the SUNI will have some of bits 3-7 set, and - // they will always be zero for the SAMBA. Ha! Bloody hardware - // engineers. It'll never work. - - if (rd_framer (dev, 0) & 0x00f0) { - // SUNI - printk (" SUNI"); - - // Reset, just in case - wr_framer (dev, 0x00, 0x0080); - wr_framer (dev, 0x00, 0x0000); - - // Configure transmit FIFO - wr_framer (dev, 0x63, rd_framer (dev, 0x63) | 0x0002); - - // Set line timed mode - wr_framer (dev, 0x05, rd_framer (dev, 0x05) | 0x0001); - } else { - // SAMBA - printk (" SAMBA"); - - // Reset, just in case - wr_framer (dev, 0, rd_framer (dev, 0) | 0x0001); - wr_framer (dev, 0, rd_framer (dev, 0) &~ 0x0001); - - // Turn off diagnostic loopback and enable line-timed mode - wr_framer (dev, 0, 0x0002); - - // Turn on transmit outputs - wr_framer (dev, 2, 0x0B80); - } - } else { - // Select 25 mode - ctrl &= ~ATM_LAYER_SELECT; - - // Madge B154 setup - // none required? - } - - printk (" LEDs"); - - GREEN_LED_ON(dev); - YELLOW_LED_ON(dev); - - printk (" ESI="); - - { - u16 b = 0; - int i; - u8 * esi = dev->atm_dev->esi; - - // in the card I have, EEPROM - // addresses 0, 1, 2 contain 0 - // addresess 5, 6 etc. contain ffff - // NB: Madge prefix is 00 00 f6 (which is 00 00 6f in Ethernet bit order) - // the read_bia routine gets the BIA in Ethernet bit order - - for (i=0; i < ESI_LEN; ++i) { - if (i % 2 == 0) - b = read_bia (dev, i/2 + 2); - else - b = b >> 8; - esi[i] = b & 0xFF; - printk ("%02x", esi[i]); - } - } - - // Enable RX_Q and ?X_COMPLETE interrupts only - wr_regl (dev, INT_ENABLE_REG_OFF, INTERESTING_INTERRUPTS); - printk (" IRQ on"); - - printk (".\n"); - - return onefivefive; -} - -/********** check max_sdu **********/ - -static int check_max_sdu (hrz_aal aal, struct atm_trafprm * tp, unsigned int max_frame_size) { - PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu"); - - switch (aal) { - case aal0: - if (!(tp->max_sdu)) { - PRINTD (DBG_QOS, "defaulting max_sdu"); - tp->max_sdu = ATM_AAL0_SDU; - } else if (tp->max_sdu != ATM_AAL0_SDU) { - PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu"); - return -EINVAL; - } - break; - case aal34: - if (tp->max_sdu == 0 || tp->max_sdu > ATM_MAX_AAL34_PDU) { - PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default"); - tp->max_sdu = ATM_MAX_AAL34_PDU; - } - break; - case aal5: - if (tp->max_sdu == 0 || tp->max_sdu > max_frame_size) { - PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default"); - tp->max_sdu = max_frame_size; - } - break; - } - return 0; -} - -/********** check pcr **********/ - -// something like this should be part of ATM Linux -static int atm_pcr_check (struct atm_trafprm * tp, unsigned int pcr) { - // we are assuming non-UBR, and non-special values of pcr - if (tp->min_pcr == ATM_MAX_PCR) - PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR"); - else if (tp->min_pcr < 0) - PRINTD (DBG_QOS, "luser gave negative min_pcr"); - else if (tp->min_pcr && tp->min_pcr > pcr) - PRINTD (DBG_QOS, "pcr less than min_pcr"); - else - // !! max_pcr = UNSPEC (0) is equivalent to max_pcr = MAX (-1) - // easier to #define ATM_MAX_PCR 0 and have all rates unsigned? - // [this would get rid of next two conditionals] - if ((0) && tp->max_pcr == ATM_MAX_PCR) - PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR"); - else if ((tp->max_pcr != ATM_MAX_PCR) && tp->max_pcr < 0) - PRINTD (DBG_QOS, "luser gave negative max_pcr"); - else if (tp->max_pcr && tp->max_pcr != ATM_MAX_PCR && tp->max_pcr < pcr) - PRINTD (DBG_QOS, "pcr greater than max_pcr"); - else { - // each limit unspecified or not violated - PRINTD (DBG_QOS, "xBR(pcr) OK"); - return 0; - } - PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d", - pcr, tp->min_pcr, tp->pcr, tp->max_pcr); - return -EINVAL; -} - -/********** open VC **********/ - -static int hrz_open (struct atm_vcc *atm_vcc) -{ - int error; - u16 channel; - - struct atm_qos * qos; - struct atm_trafprm * txtp; - struct atm_trafprm * rxtp; - - hrz_dev * dev = HRZ_DEV(atm_vcc->dev); - hrz_vcc vcc; - hrz_vcc * vccp; // allocated late - short vpi = atm_vcc->vpi; - int vci = atm_vcc->vci; - PRINTD (DBG_FLOW|DBG_VCC, "hrz_open %x %x", vpi, vci); - -#ifdef ATM_VPI_UNSPEC - // UNSPEC is deprecated, remove this code eventually - if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC) { - PRINTK (KERN_WARNING, "rejecting open with unspecified VPI/VCI (deprecated)"); - return -EINVAL; - } -#endif - - error = vpivci_to_channel (&channel, vpi, vci); - if (error) { - PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci); - return error; - } - - vcc.channel = channel; - // max speed for the moment - vcc.tx_rate = 0x0; - - qos = &atm_vcc->qos; - - // check AAL and remember it - switch (qos->aal) { - case ATM_AAL0: - // we would if it were 48 bytes and not 52! - PRINTD (DBG_QOS|DBG_VCC, "AAL0"); - vcc.aal = aal0; - break; - case ATM_AAL34: - // we would if I knew how do the SAR! - PRINTD (DBG_QOS|DBG_VCC, "AAL3/4"); - vcc.aal = aal34; - break; - case ATM_AAL5: - PRINTD (DBG_QOS|DBG_VCC, "AAL5"); - vcc.aal = aal5; - break; - default: - PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!"); - return -EINVAL; - } - - // TX traffic parameters - - // there are two, interrelated problems here: 1. the reservation of - // PCR is not a binary choice, we are given bounds and/or a - // desirable value; 2. the device is only capable of certain values, - // most of which are not integers. It is almost certainly acceptable - // to be off by a maximum of 1 to 10 cps. - - // Pragmatic choice: always store an integral PCR as that which has - // been allocated, even if we allocate a little (or a lot) less, - // after rounding. The actual allocation depends on what we can - // manage with our rate selection algorithm. The rate selection - // algorithm is given an integral PCR and a tolerance and told - // whether it should round the value up or down if the tolerance is - // exceeded; it returns: a) the actual rate selected (rounded up to - // the nearest integer), b) a bit pattern to feed to the timer - // register, and c) a failure value if no applicable rate exists. - - // Part of the job is done by atm_pcr_goal which gives us a PCR - // specification which says: EITHER grab the maximum available PCR - // (and perhaps a lower bound which we must not pass), OR grab this - // amount, rounding down if you have to (and perhaps a lower bound - // which we must not pass) OR grab this amount, rounding up if you - // have to (and perhaps an upper bound which we must not pass). If any - // bounds ARE passed we fail. Note that rounding is only rounding to - // match device limitations, we do not round down to satisfy - // bandwidth availability even if this would not violate any given - // lower bound. - - // Note: telephony = 64kb/s = 48 byte cell payload @ 500/3 cells/s - // (say) so this is not even a binary fixpoint cell rate (but this - // device can do it). To avoid this sort of hassle we use a - // tolerance parameter (currently fixed at 10 cps). - - PRINTD (DBG_QOS, "TX:"); - - txtp = &qos->txtp; - - // set up defaults for no traffic - vcc.tx_rate = 0; - // who knows what would actually happen if you try and send on this? - vcc.tx_xbr_bits = IDLE_RATE_TYPE; - vcc.tx_pcr_bits = CLOCK_DISABLE; -#if 0 - vcc.tx_scr_bits = CLOCK_DISABLE; - vcc.tx_bucket_bits = 0; -#endif - - if (txtp->traffic_class != ATM_NONE) { - error = check_max_sdu (vcc.aal, txtp, max_tx_size); - if (error) { - PRINTD (DBG_QOS, "TX max_sdu check failed"); - return error; - } - - switch (txtp->traffic_class) { - case ATM_UBR: { - // we take "the PCR" as a rate-cap - // not reserved - vcc.tx_rate = 0; - make_rate (dev, 1<<30, round_nearest, &vcc.tx_pcr_bits, NULL); - vcc.tx_xbr_bits = ABR_RATE_TYPE; - break; - } -#if 0 - case ATM_ABR: { - // reserve min, allow up to max - vcc.tx_rate = 0; // ? - make_rate (dev, 1<<30, round_nearest, &vcc.tx_pcr_bits, 0); - vcc.tx_xbr_bits = ABR_RATE_TYPE; - break; - } -#endif - case ATM_CBR: { - int pcr = atm_pcr_goal (txtp); - rounding r; - if (!pcr) { - // down vs. up, remaining bandwidth vs. unlimited bandwidth!! - // should really have: once someone gets unlimited bandwidth - // that no more non-UBR channels can be opened until the - // unlimited one closes?? For the moment, round_down means - // greedy people actually get something and not nothing - r = round_down; - // slight race (no locking) here so we may get -EAGAIN - // later; the greedy bastards would deserve it :) - PRINTD (DBG_QOS, "snatching all remaining TX bandwidth"); - pcr = dev->tx_avail; - } else if (pcr < 0) { - r = round_down; - pcr = -pcr; - } else { - r = round_up; - } - error = make_rate_with_tolerance (dev, pcr, r, 10, - &vcc.tx_pcr_bits, &vcc.tx_rate); - if (error) { - PRINTD (DBG_QOS, "could not make rate from TX PCR"); - return error; - } - // not really clear what further checking is needed - error = atm_pcr_check (txtp, vcc.tx_rate); - if (error) { - PRINTD (DBG_QOS, "TX PCR failed consistency check"); - return error; - } - vcc.tx_xbr_bits = CBR_RATE_TYPE; - break; - } -#if 0 - case ATM_VBR: { - int pcr = atm_pcr_goal (txtp); - // int scr = atm_scr_goal (txtp); - int scr = pcr/2; // just for fun - unsigned int mbs = 60; // just for fun - rounding pr; - rounding sr; - unsigned int bucket; - if (!pcr) { - pr = round_nearest; - pcr = 1<<30; - } else if (pcr < 0) { - pr = round_down; - pcr = -pcr; - } else { - pr = round_up; - } - error = make_rate_with_tolerance (dev, pcr, pr, 10, - &vcc.tx_pcr_bits, 0); - if (!scr) { - // see comments for PCR with CBR above - sr = round_down; - // slight race (no locking) here so we may get -EAGAIN - // later; the greedy bastards would deserve it :) - PRINTD (DBG_QOS, "snatching all remaining TX bandwidth"); - scr = dev->tx_avail; - } else if (scr < 0) { - sr = round_down; - scr = -scr; - } else { - sr = round_up; - } - error = make_rate_with_tolerance (dev, scr, sr, 10, - &vcc.tx_scr_bits, &vcc.tx_rate); - if (error) { - PRINTD (DBG_QOS, "could not make rate from TX SCR"); - return error; - } - // not really clear what further checking is needed - // error = atm_scr_check (txtp, vcc.tx_rate); - if (error) { - PRINTD (DBG_QOS, "TX SCR failed consistency check"); - return error; - } - // bucket calculations (from a piece of paper...) cell bucket - // capacity must be largest integer smaller than m(p-s)/p + 1 - // where m = max burst size, p = pcr, s = scr - bucket = mbs*(pcr-scr)/pcr; - if (bucket*pcr != mbs*(pcr-scr)) - bucket += 1; - if (bucket > BUCKET_MAX_SIZE) { - PRINTD (DBG_QOS, "shrinking bucket from %u to %u", - bucket, BUCKET_MAX_SIZE); - bucket = BUCKET_MAX_SIZE; - } - vcc.tx_xbr_bits = VBR_RATE_TYPE; - vcc.tx_bucket_bits = bucket; - break; - } -#endif - default: { - PRINTD (DBG_QOS, "unsupported TX traffic class"); - return -EINVAL; - } - } - } - - // RX traffic parameters - - PRINTD (DBG_QOS, "RX:"); - - rxtp = &qos->rxtp; - - // set up defaults for no traffic - vcc.rx_rate = 0; - - if (rxtp->traffic_class != ATM_NONE) { - error = check_max_sdu (vcc.aal, rxtp, max_rx_size); - if (error) { - PRINTD (DBG_QOS, "RX max_sdu check failed"); - return error; - } - switch (rxtp->traffic_class) { - case ATM_UBR: { - // not reserved - break; - } -#if 0 - case ATM_ABR: { - // reserve min - vcc.rx_rate = 0; // ? - break; - } -#endif - case ATM_CBR: { - int pcr = atm_pcr_goal (rxtp); - if (!pcr) { - // slight race (no locking) here so we may get -EAGAIN - // later; the greedy bastards would deserve it :) - PRINTD (DBG_QOS, "snatching all remaining RX bandwidth"); - pcr = dev->rx_avail; - } else if (pcr < 0) { - pcr = -pcr; - } - vcc.rx_rate = pcr; - // not really clear what further checking is needed - error = atm_pcr_check (rxtp, vcc.rx_rate); - if (error) { - PRINTD (DBG_QOS, "RX PCR failed consistency check"); - return error; - } - break; - } -#if 0 - case ATM_VBR: { - // int scr = atm_scr_goal (rxtp); - int scr = 1<<16; // just for fun - if (!scr) { - // slight race (no locking) here so we may get -EAGAIN - // later; the greedy bastards would deserve it :) - PRINTD (DBG_QOS, "snatching all remaining RX bandwidth"); - scr = dev->rx_avail; - } else if (scr < 0) { - scr = -scr; - } - vcc.rx_rate = scr; - // not really clear what further checking is needed - // error = atm_scr_check (rxtp, vcc.rx_rate); - if (error) { - PRINTD (DBG_QOS, "RX SCR failed consistency check"); - return error; - } - break; - } -#endif - default: { - PRINTD (DBG_QOS, "unsupported RX traffic class"); - return -EINVAL; - } - } - } - - - // late abort useful for diagnostics - if (vcc.aal != aal5) { - PRINTD (DBG_QOS, "AAL not supported"); - return -EINVAL; - } - - // get space for our vcc stuff and copy parameters into it - vccp = kmalloc (sizeof(hrz_vcc), GFP_KERNEL); - if (!vccp) { - PRINTK (KERN_ERR, "out of memory!"); - return -ENOMEM; - } - *vccp = vcc; - - // clear error and grab cell rate resource lock - error = 0; - spin_lock (&dev->rate_lock); - - if (vcc.tx_rate > dev->tx_avail) { - PRINTD (DBG_QOS, "not enough TX PCR left"); - error = -EAGAIN; - } - - if (vcc.rx_rate > dev->rx_avail) { - PRINTD (DBG_QOS, "not enough RX PCR left"); - error = -EAGAIN; - } - - if (!error) { - // really consume cell rates - dev->tx_avail -= vcc.tx_rate; - dev->rx_avail -= vcc.rx_rate; - PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR", - vcc.tx_rate, vcc.rx_rate); - } - - // release lock and exit on error - spin_unlock (&dev->rate_lock); - if (error) { - PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources"); - kfree (vccp); - return error; - } - - // this is "immediately before allocating the connection identifier - // in hardware" - so long as the next call does not fail :) - set_bit(ATM_VF_ADDR,&atm_vcc->flags); - - // any errors here are very serious and should never occur - - if (rxtp->traffic_class != ATM_NONE) { - if (dev->rxer[channel]) { - PRINTD (DBG_ERR|DBG_VCC, "VC already open for RX"); - error = -EBUSY; - } - if (!error) - error = hrz_open_rx (dev, channel); - if (error) { - kfree (vccp); - return error; - } - // this link allows RX frames through - dev->rxer[channel] = atm_vcc; - } - - // success, set elements of atm_vcc - atm_vcc->dev_data = (void *) vccp; - - // indicate readiness - set_bit(ATM_VF_READY,&atm_vcc->flags); - - return 0; -} - -/********** close VC **********/ - -static void hrz_close (struct atm_vcc * atm_vcc) { - hrz_dev * dev = HRZ_DEV(atm_vcc->dev); - hrz_vcc * vcc = HRZ_VCC(atm_vcc); - u16 channel = vcc->channel; - PRINTD (DBG_VCC|DBG_FLOW, "hrz_close"); - - // indicate unreadiness - clear_bit(ATM_VF_READY,&atm_vcc->flags); - - if (atm_vcc->qos.txtp.traffic_class != ATM_NONE) { - unsigned int i; - - // let any TX on this channel that has started complete - // no restart, just keep trying - while (tx_hold (dev)) - ; - // remove record of any tx_channel having been setup for this channel - for (i = 0; i < TX_CHANS; ++i) - if (dev->tx_channel_record[i] == channel) { - dev->tx_channel_record[i] = -1; - break; - } - if (dev->last_vc == channel) - dev->tx_last = -1; - tx_release (dev); - } - - if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) { - // disable RXing - it tries quite hard - hrz_close_rx (dev, channel); - // forget the vcc - no more skbs will be pushed - if (atm_vcc != dev->rxer[channel]) - PRINTK (KERN_ERR, "%s atm_vcc=%p rxer[channel]=%p", - "arghhh! we're going to die!", - atm_vcc, dev->rxer[channel]); - dev->rxer[channel] = NULL; - } - - // atomically release our rate reservation - spin_lock (&dev->rate_lock); - PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR", - vcc->tx_rate, vcc->rx_rate); - dev->tx_avail += vcc->tx_rate; - dev->rx_avail += vcc->rx_rate; - spin_unlock (&dev->rate_lock); - - // free our structure - kfree (vcc); - // say the VPI/VCI is free again - clear_bit(ATM_VF_ADDR,&atm_vcc->flags); -} - -#if 0 -static int hrz_ioctl (struct atm_dev * atm_dev, unsigned int cmd, void *arg) { - hrz_dev * dev = HRZ_DEV(atm_dev); - PRINTD (DBG_FLOW, "hrz_ioctl"); - return -1; -} - -unsigned char hrz_phy_get (struct atm_dev * atm_dev, unsigned long addr) { - hrz_dev * dev = HRZ_DEV(atm_dev); - PRINTD (DBG_FLOW, "hrz_phy_get"); - return 0; -} - -static void hrz_phy_put (struct atm_dev * atm_dev, unsigned char value, - unsigned long addr) { - hrz_dev * dev = HRZ_DEV(atm_dev); - PRINTD (DBG_FLOW, "hrz_phy_put"); -} - -static int hrz_change_qos (struct atm_vcc * atm_vcc, struct atm_qos *qos, int flgs) { - hrz_dev * dev = HRZ_DEV(vcc->dev); - PRINTD (DBG_FLOW, "hrz_change_qos"); - return -1; -} -#endif - -/********** proc file contents **********/ - -static int hrz_proc_read (struct atm_dev * atm_dev, loff_t * pos, char * page) { - hrz_dev * dev = HRZ_DEV(atm_dev); - int left = *pos; - PRINTD (DBG_FLOW, "hrz_proc_read"); - - /* more diagnostics here? */ - -#if 0 - if (!left--) { - unsigned int count = sprintf (page, "vbr buckets:"); - unsigned int i; - for (i = 0; i < TX_CHANS; ++i) - count += sprintf (page, " %u/%u", - query_tx_channel_config (dev, i, BUCKET_FULLNESS_ACCESS), - query_tx_channel_config (dev, i, BUCKET_CAPACITY_ACCESS)); - count += sprintf (page+count, ".\n"); - return count; - } -#endif - - if (!left--) - return sprintf (page, - "cells: TX %lu, RX %lu, HEC errors %lu, unassigned %lu.\n", - dev->tx_cell_count, dev->rx_cell_count, - dev->hec_error_count, dev->unassigned_cell_count); - - if (!left--) - return sprintf (page, - "free cell buffers: TX %hu, RX %hu+%hu.\n", - rd_regw (dev, TX_FREE_BUFFER_COUNT_OFF), - rd_regw (dev, RX_FREE_BUFFER_COUNT_OFF), - dev->noof_spare_buffers); - - if (!left--) - return sprintf (page, - "cps remaining: TX %u, RX %u\n", - dev->tx_avail, dev->rx_avail); - - return 0; -} - -static const struct atmdev_ops hrz_ops = { - .open = hrz_open, - .close = hrz_close, - .send = hrz_send, - .proc_read = hrz_proc_read, - .owner = THIS_MODULE, -}; - -static int hrz_probe(struct pci_dev *pci_dev, - const struct pci_device_id *pci_ent) -{ - hrz_dev * dev; - int err = 0; - - // adapter slot free, read resources from PCI configuration space - u32 iobase = pci_resource_start (pci_dev, 0); - u32 * membase = bus_to_virt (pci_resource_start (pci_dev, 1)); - unsigned int irq; - unsigned char lat; - - PRINTD (DBG_FLOW, "hrz_probe"); - - if (pci_enable_device(pci_dev)) - return -EINVAL; - - /* XXX DEV_LABEL is a guess */ - if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { - err = -EINVAL; - goto out_disable; - } - - dev = kzalloc(sizeof(hrz_dev), GFP_KERNEL); - if (!dev) { - // perhaps we should be nice: deregister all adapters and abort? - PRINTD(DBG_ERR, "out of memory"); - err = -ENOMEM; - goto out_release; - } - - pci_set_drvdata(pci_dev, dev); - - // grab IRQ and install handler - move this someplace more sensible - irq = pci_dev->irq; - if (request_irq(irq, - interrupt_handler, - IRQF_SHARED, /* irqflags guess */ - DEV_LABEL, /* name guess */ - dev)) { - PRINTD(DBG_WARN, "request IRQ failed!"); - err = -EINVAL; - goto out_free; - } - - PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p", - iobase, irq, membase); - - dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1, - NULL); - if (!(dev->atm_dev)) { - PRINTD(DBG_ERR, "failed to register Madge ATM adapter"); - err = -EINVAL; - goto out_free_irq; - } - - PRINTD(DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p", - dev->atm_dev->number, dev, dev->atm_dev); - dev->atm_dev->dev_data = (void *) dev; - dev->pci_dev = pci_dev; - - // enable bus master accesses - pci_set_master(pci_dev); - - // frobnicate latency (upwards, usually) - pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &lat); - if (pci_lat) { - PRINTD(DBG_INFO, "%s PCI latency timer from %hu to %hu", - "changing", lat, pci_lat); - pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, pci_lat); - } else if (lat < MIN_PCI_LATENCY) { - PRINTK(KERN_INFO, "%s PCI latency timer from %hu to %hu", - "increasing", lat, MIN_PCI_LATENCY); - pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, MIN_PCI_LATENCY); - } - - dev->iobase = iobase; - dev->irq = irq; - dev->membase = membase; - - dev->rx_q_entry = dev->rx_q_reset = &memmap->rx_q_entries[0]; - dev->rx_q_wrap = &memmap->rx_q_entries[RX_CHANS-1]; - - // these next three are performance hacks - dev->last_vc = -1; - dev->tx_last = -1; - dev->tx_idle = 0; - - dev->tx_regions = 0; - dev->tx_bytes = 0; - dev->tx_skb = NULL; - dev->tx_iovec = NULL; - - dev->tx_cell_count = 0; - dev->rx_cell_count = 0; - dev->hec_error_count = 0; - dev->unassigned_cell_count = 0; - - dev->noof_spare_buffers = 0; - - { - unsigned int i; - for (i = 0; i < TX_CHANS; ++i) - dev->tx_channel_record[i] = -1; - } - - dev->flags = 0; - - // Allocate cell rates and remember ASIC version - // Fibre: ATM_OC3_PCR = 1555200000/8/270*260/53 - 29/53 - // Copper: (WRONG) we want 6 into the above, close to 25Mb/s - // Copper: (plagarise!) 25600000/8/270*260/53 - n/53 - - if (hrz_init(dev)) { - // to be really pedantic, this should be ATM_OC3c_PCR - dev->tx_avail = ATM_OC3_PCR; - dev->rx_avail = ATM_OC3_PCR; - set_bit(ultra, &dev->flags); // NOT "|= ultra" ! - } else { - dev->tx_avail = ((25600000/8)*26)/(27*53); - dev->rx_avail = ((25600000/8)*26)/(27*53); - PRINTD(DBG_WARN, "Buggy ASIC: no TX bus-mastering."); - } - - // rate changes spinlock - spin_lock_init(&dev->rate_lock); - - // on-board memory access spinlock; we want atomic reads and - // writes to adapter memory (handles IRQ and SMP) - spin_lock_init(&dev->mem_lock); - - init_waitqueue_head(&dev->tx_queue); - - // vpi in 0..4, vci in 6..10 - dev->atm_dev->ci_range.vpi_bits = vpi_bits; - dev->atm_dev->ci_range.vci_bits = 10-vpi_bits; - - timer_setup(&dev->housekeeping, do_housekeeping, 0); - mod_timer(&dev->housekeeping, jiffies); - -out: - return err; - -out_free_irq: - free_irq(irq, dev); -out_free: - kfree(dev); -out_release: - release_region(iobase, HRZ_IO_EXTENT); -out_disable: - pci_disable_device(pci_dev); - goto out; -} - -static void hrz_remove_one(struct pci_dev *pci_dev) -{ - hrz_dev *dev; - - dev = pci_get_drvdata(pci_dev); - - PRINTD(DBG_INFO, "closing %p (atm_dev = %p)", dev, dev->atm_dev); - del_timer_sync(&dev->housekeeping); - hrz_reset(dev); - atm_dev_deregister(dev->atm_dev); - free_irq(dev->irq, dev); - release_region(dev->iobase, HRZ_IO_EXTENT); - kfree(dev); - - pci_disable_device(pci_dev); -} - -static void __init hrz_check_args (void) { -#ifdef DEBUG_HORIZON - PRINTK (KERN_NOTICE, "debug bitmap is %hx", debug &= DBG_MASK); -#else - if (debug) - PRINTK (KERN_NOTICE, "no debug support in this image"); -#endif - - if (vpi_bits > HRZ_MAX_VPI) - PRINTK (KERN_ERR, "vpi_bits has been limited to %hu", - vpi_bits = HRZ_MAX_VPI); - - if (max_tx_size < 0 || max_tx_size > TX_AAL5_LIMIT) - PRINTK (KERN_NOTICE, "max_tx_size has been limited to %hu", - max_tx_size = TX_AAL5_LIMIT); - - if (max_rx_size < 0 || max_rx_size > RX_AAL5_LIMIT) - PRINTK (KERN_NOTICE, "max_rx_size has been limited to %hu", - max_rx_size = RX_AAL5_LIMIT); - - return; -} - -MODULE_AUTHOR(maintainer_string); -MODULE_DESCRIPTION(description_string); -MODULE_LICENSE("GPL"); -module_param(debug, ushort, 0644); -module_param(vpi_bits, ushort, 0); -module_param(max_tx_size, int, 0); -module_param(max_rx_size, int, 0); -module_param(pci_lat, byte, 0); -MODULE_PARM_DESC(debug, "debug bitmap, see .h file"); -MODULE_PARM_DESC(vpi_bits, "number of bits (0..4) to allocate to VPIs"); -MODULE_PARM_DESC(max_tx_size, "maximum size of TX AAL5 frames"); -MODULE_PARM_DESC(max_rx_size, "maximum size of RX AAL5 frames"); -MODULE_PARM_DESC(pci_lat, "PCI latency in bus cycles"); - -static const struct pci_device_id hrz_pci_tbl[] = { - { PCI_VENDOR_ID_MADGE, PCI_DEVICE_ID_MADGE_HORIZON, PCI_ANY_ID, PCI_ANY_ID, - 0, 0, 0 }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, hrz_pci_tbl); - -static struct pci_driver hrz_driver = { - .name = "horizon", - .probe = hrz_probe, - .remove = hrz_remove_one, - .id_table = hrz_pci_tbl, -}; - -/********** module entry **********/ - -static int __init hrz_module_init (void) { - BUILD_BUG_ON(sizeof(struct MEMMAP) != 128*1024/4); - - show_version(); - - // check arguments - hrz_check_args(); - - // get the juice - return pci_register_driver(&hrz_driver); -} - -/********** module exit **********/ - -static void __exit hrz_module_exit (void) { - PRINTD (DBG_FLOW, "cleanup_module"); - - pci_unregister_driver(&hrz_driver); -} - -module_init(hrz_module_init); -module_exit(hrz_module_exit); diff --git a/drivers/atm/horizon.h b/drivers/atm/horizon.h deleted file mode 100644 index 7523eba19bad..000000000000 --- a/drivers/atm/horizon.h +++ /dev/null @@ -1,492 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - Madge Horizon ATM Adapter driver. - Copyright (C) 1995-1999 Madge Networks Ltd. - -*/ - -/* - IMPORTANT NOTE: Madge Networks no longer makes the adapters - supported by this driver and makes no commitment to maintain it. -*/ - -/* too many macros - change to inline functions */ - -#ifndef DRIVER_ATM_HORIZON_H -#define DRIVER_ATM_HORIZON_H - - -#ifdef CONFIG_ATM_HORIZON_DEBUG -#define DEBUG_HORIZON -#endif - -#define DEV_LABEL "hrz" - -#ifndef PCI_VENDOR_ID_MADGE -#define PCI_VENDOR_ID_MADGE 0x10B6 -#endif -#ifndef PCI_DEVICE_ID_MADGE_HORIZON -#define PCI_DEVICE_ID_MADGE_HORIZON 0x1000 -#endif - -// diagnostic output - -#define PRINTK(severity,format,args...) \ - printk(severity DEV_LABEL ": " format "\n" , ## args) - -#ifdef DEBUG_HORIZON - -#define DBG_ERR 0x0001 -#define DBG_WARN 0x0002 -#define DBG_INFO 0x0004 -#define DBG_VCC 0x0008 -#define DBG_QOS 0x0010 -#define DBG_TX 0x0020 -#define DBG_RX 0x0040 -#define DBG_SKB 0x0080 -#define DBG_IRQ 0x0100 -#define DBG_FLOW 0x0200 -#define DBG_BUS 0x0400 -#define DBG_REGS 0x0800 -#define DBG_DATA 0x1000 -#define DBG_MASK 0x1fff - -/* the ## prevents the annoying double expansion of the macro arguments */ -/* KERN_INFO is used since KERN_DEBUG often does not make it to the console */ -#define PRINTDB(bits,format,args...) \ - ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) -#define PRINTDM(bits,format,args...) \ - ( (debug & (bits)) ? printk (format , ## args) : 1 ) -#define PRINTDE(bits,format,args...) \ - ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 ) -#define PRINTD(bits,format,args...) \ - ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) - -#else - -#define PRINTD(bits,format,args...) -#define PRINTDB(bits,format,args...) -#define PRINTDM(bits,format,args...) -#define PRINTDE(bits,format,args...) - -#endif - -#define PRINTDD(sec,fmt,args...) -#define PRINTDDB(sec,fmt,args...) -#define PRINTDDM(sec,fmt,args...) -#define PRINTDDE(sec,fmt,args...) - -// fixed constants - -#define SPARE_BUFFER_POOL_SIZE MAX_VCS -#define HRZ_MAX_VPI 4 -#define MIN_PCI_LATENCY 48 // 24 IS TOO SMALL - -/* Horizon specific bits */ -/* Register offsets */ - -#define HRZ_IO_EXTENT 0x80 - -#define DATA_PORT_OFF 0x00 -#define TX_CHANNEL_PORT_OFF 0x04 -#define TX_DESCRIPTOR_PORT_OFF 0x08 -#define MEMORY_PORT_OFF 0x0C -#define MEM_WR_ADDR_REG_OFF 0x14 -#define MEM_RD_ADDR_REG_OFF 0x18 -#define CONTROL_0_REG 0x1C -#define INT_SOURCE_REG_OFF 0x20 -#define INT_ENABLE_REG_OFF 0x24 -#define MASTER_RX_ADDR_REG_OFF 0x28 -#define MASTER_RX_COUNT_REG_OFF 0x2C -#define MASTER_TX_ADDR_REG_OFF 0x30 -#define MASTER_TX_COUNT_REG_OFF 0x34 -#define TX_DESCRIPTOR_REG_OFF 0x38 -#define TX_CHANNEL_CONFIG_COMMAND_OFF 0x40 -#define TX_CHANNEL_CONFIG_DATA_OFF 0x44 -#define TX_FREE_BUFFER_COUNT_OFF 0x48 -#define RX_FREE_BUFFER_COUNT_OFF 0x4C -#define TX_CONFIG_OFF 0x50 -#define TX_STATUS_OFF 0x54 -#define RX_CONFIG_OFF 0x58 -#define RX_LINE_CONFIG_OFF 0x5C -#define RX_QUEUE_RD_PTR_OFF 0x60 -#define RX_QUEUE_WR_PTR_OFF 0x64 -#define MAX_AAL5_CELL_COUNT_OFF 0x68 -#define RX_CHANNEL_PORT_OFF 0x6C -#define TX_CELL_COUNT_OFF 0x70 -#define RX_CELL_COUNT_OFF 0x74 -#define HEC_ERROR_COUNT_OFF 0x78 -#define UNASSIGNED_CELL_COUNT_OFF 0x7C - -/* Register bit definitions */ - -/* Control 0 register */ - -#define SEEPROM_DO 0x00000001 -#define SEEPROM_DI 0x00000002 -#define SEEPROM_SK 0x00000004 -#define SEEPROM_CS 0x00000008 -#define DEBUG_BIT_0 0x00000010 -#define DEBUG_BIT_1 0x00000020 -#define DEBUG_BIT_2 0x00000040 -// RESERVED 0x00000080 -#define DEBUG_BIT_0_OE 0x00000100 -#define DEBUG_BIT_1_OE 0x00000200 -#define DEBUG_BIT_2_OE 0x00000400 -// RESERVED 0x00000800 -#define DEBUG_BIT_0_STATE 0x00001000 -#define DEBUG_BIT_1_STATE 0x00002000 -#define DEBUG_BIT_2_STATE 0x00004000 -// RESERVED 0x00008000 -#define GENERAL_BIT_0 0x00010000 -#define GENERAL_BIT_1 0x00020000 -#define GENERAL_BIT_2 0x00040000 -#define GENERAL_BIT_3 0x00080000 -#define RESET_HORIZON 0x00100000 -#define RESET_ATM 0x00200000 -#define RESET_RX 0x00400000 -#define RESET_TX 0x00800000 -#define RESET_HOST 0x01000000 -// RESERVED 0x02000000 -#define TARGET_RETRY_DISABLE 0x04000000 -#define ATM_LAYER_SELECT 0x08000000 -#define ATM_LAYER_STATUS 0x10000000 -// RESERVED 0xE0000000 - -/* Interrupt source and enable registers */ - -#define RX_DATA_AV 0x00000001 -#define RX_DISABLED 0x00000002 -#define TIMING_MARKER 0x00000004 -#define FORCED 0x00000008 -#define RX_BUS_MASTER_COMPLETE 0x00000010 -#define TX_BUS_MASTER_COMPLETE 0x00000020 -#define ABR_TX_CELL_COUNT_INT 0x00000040 -#define DEBUG_INT 0x00000080 -// RESERVED 0xFFFFFF00 - -/* PIO and Bus Mastering */ - -#define MAX_PIO_COUNT 0x000000ff // 255 - make tunable? -// 8188 is a hard limit for bus mastering -#define MAX_TRANSFER_COUNT 0x00001ffc // 8188 -#define MASTER_TX_AUTO_APPEND_DESC 0x80000000 - -/* TX channel config command port */ - -#define PCR_TIMER_ACCESS 0x0000 -#define SCR_TIMER_ACCESS 0x0001 -#define BUCKET_CAPACITY_ACCESS 0x0002 -#define BUCKET_FULLNESS_ACCESS 0x0003 -#define RATE_TYPE_ACCESS 0x0004 -// UNUSED 0x00F8 -#define TX_CHANNEL_CONFIG_MULT 0x0100 -// UNUSED 0xF800 -#define BUCKET_MAX_SIZE 0x003f - -/* TX channel config data port */ - -#define CLOCK_SELECT_SHIFT 4 -#define CLOCK_DISABLE 0x00ff - -#define IDLE_RATE_TYPE 0x0 -#define ABR_RATE_TYPE 0x1 -#define VBR_RATE_TYPE 0x2 -#define CBR_RATE_TYPE 0x3 - -/* TX config register */ - -#define DRVR_DRVRBAR_ENABLE 0x0001 -#define TXCLK_MUX_SELECT_RCLK 0x0002 -#define TRANSMIT_TIMING_MARKER 0x0004 -#define LOOPBACK_TIMING_MARKER 0x0008 -#define TX_TEST_MODE_16MHz 0x0000 -#define TX_TEST_MODE_8MHz 0x0010 -#define TX_TEST_MODE_5_33MHz 0x0020 -#define TX_TEST_MODE_4MHz 0x0030 -#define TX_TEST_MODE_3_2MHz 0x0040 -#define TX_TEST_MODE_2_66MHz 0x0050 -#define TX_TEST_MODE_2_29MHz 0x0060 -#define TX_NORMAL_OPERATION 0x0070 -#define ABR_ROUND_ROBIN 0x0080 - -/* TX status register */ - -#define IDLE_CHANNELS_MASK 0x00FF -#define ABR_CELL_COUNT_REACHED_MULT 0x0100 -#define ABR_CELL_COUNT_REACHED_MASK 0xFF - -/* RX config register */ - -#define NON_USER_CELLS_IN_ONE_CHANNEL 0x0008 -#define RX_ENABLE 0x0010 -#define IGNORE_UNUSED_VPI_VCI_BITS_SET 0x0000 -#define NON_USER_UNUSED_VPI_VCI_BITS_SET 0x0020 -#define DISCARD_UNUSED_VPI_VCI_BITS_SET 0x0040 - -/* RX line config register */ - -#define SIGNAL_LOSS 0x0001 -#define FREQUENCY_DETECT_ERROR 0x0002 -#define LOCK_DETECT_ERROR 0x0004 -#define SELECT_INTERNAL_LOOPBACK 0x0008 -#define LOCK_DETECT_ENABLE 0x0010 -#define FREQUENCY_DETECT_ENABLE 0x0020 -#define USER_FRAQ 0x0040 -#define GXTALOUT_SELECT_DIV4 0x0080 -#define GXTALOUT_SELECT_NO_GATING 0x0100 -#define TIMING_MARKER_RECEIVED 0x0200 - -/* RX channel port */ - -#define RX_CHANNEL_MASK 0x03FF -// UNUSED 0x3C00 -#define FLUSH_CHANNEL 0x4000 -#define RX_CHANNEL_UPDATE_IN_PROGRESS 0x8000 - -/* Receive queue entry */ - -#define RX_Q_ENTRY_LENGTH_MASK 0x0000FFFF -#define RX_Q_ENTRY_CHANNEL_SHIFT 16 -#define SIMONS_DODGEY_MARKER 0x08000000 -#define RX_CONGESTION_EXPERIENCED 0x10000000 -#define RX_CRC_10_OK 0x20000000 -#define RX_CRC_32_OK 0x40000000 -#define RX_COMPLETE_FRAME 0x80000000 - -/* Offsets and constants for use with the buffer memory */ - -/* Buffer pointers and channel types */ - -#define BUFFER_PTR_MASK 0x0000FFFF -#define RX_INT_THRESHOLD_MULT 0x00010000 -#define RX_INT_THRESHOLD_MASK 0x07FF -#define INT_EVERY_N_CELLS 0x08000000 -#define CONGESTION_EXPERIENCED 0x10000000 -#define FIRST_CELL_OF_AAL5_FRAME 0x20000000 -#define CHANNEL_TYPE_AAL5 0x00000000 -#define CHANNEL_TYPE_RAW_CELLS 0x40000000 -#define CHANNEL_TYPE_AAL3_4 0x80000000 - -/* Buffer status stuff */ - -#define BUFF_STATUS_MASK 0x00030000 -#define BUFF_STATUS_EMPTY 0x00000000 -#define BUFF_STATUS_CELL_AV 0x00010000 -#define BUFF_STATUS_LAST_CELL_AV 0x00020000 - -/* Transmit channel stuff */ - -/* Receive channel stuff */ - -#define RX_CHANNEL_DISABLED 0x00000000 -#define RX_CHANNEL_IDLE 0x00000001 - -/* General things */ - -#define INITIAL_CRC 0xFFFFFFFF - -// A Horizon u32, a byte! Really nasty. Horizon pointers are (32 bit) -// word addresses and so standard C pointer operations break (as they -// assume byte addresses); so we pretend that Horizon words (and word -// pointers) are bytes (and byte pointers) for the purposes of having -// a memory map that works. - -typedef u8 HDW; - -typedef struct cell_buf { - HDW payload[12]; - HDW next; - HDW cell_count; // AAL5 rx bufs - HDW res; - union { - HDW partial_crc; // AAL5 rx bufs - HDW cell_header; // RAW bufs - } u; -} cell_buf; - -typedef struct tx_ch_desc { - HDW rd_buf_type; - HDW wr_buf_type; - HDW partial_crc; - HDW cell_header; -} tx_ch_desc; - -typedef struct rx_ch_desc { - HDW wr_buf_type; - HDW rd_buf_type; -} rx_ch_desc; - -typedef struct rx_q_entry { - HDW entry; -} rx_q_entry; - -#define TX_CHANS 8 -#define RX_CHANS 1024 -#define RX_QS 1024 -#define MAX_VCS RX_CHANS - -/* Horizon buffer memory map */ - -// TX Channel Descriptors 2 -// TX Initial Buffers 8 // TX_CHANS -#define BUFN1_SIZE 118 // (126 - TX_CHANS) -// RX/TX Start/End Buffers 4 -#define BUFN2_SIZE 124 -// RX Queue Entries 64 -#define BUFN3_SIZE 192 -// RX Channel Descriptors 128 -#define BUFN4_SIZE 1408 -// TOTAL cell_buff chunks 2048 - -// cell_buf bufs[2048]; -// HDW dws[32768]; - -typedef struct MEMMAP { - tx_ch_desc tx_descs[TX_CHANS]; // 8 * 4 = 32 , 0x0020 - cell_buf inittxbufs[TX_CHANS]; // these are really - cell_buf bufn1[BUFN1_SIZE]; // part of this pool - cell_buf txfreebufstart; - cell_buf txfreebufend; - cell_buf rxfreebufstart; - cell_buf rxfreebufend; // 8+118+1+1+1+1+124 = 254 - cell_buf bufn2[BUFN2_SIZE]; // 16 * 254 = 4064 , 0x1000 - rx_q_entry rx_q_entries[RX_QS]; // 1 * 1024 = 1024 , 0x1400 - cell_buf bufn3[BUFN3_SIZE]; // 16 * 192 = 3072 , 0x2000 - rx_ch_desc rx_descs[MAX_VCS]; // 2 * 1024 = 2048 , 0x2800 - cell_buf bufn4[BUFN4_SIZE]; // 16 * 1408 = 22528 , 0x8000 -} MEMMAP; - -#define memmap ((MEMMAP *)0) - -/* end horizon specific bits */ - -typedef enum { - aal0, - aal34, - aal5 -} hrz_aal; - -typedef enum { - tx_busy, - rx_busy, - ultra -} hrz_flags; - -// a single struct pointed to by atm_vcc->dev_data - -typedef struct { - unsigned int tx_rate; - unsigned int rx_rate; - u16 channel; - u16 tx_xbr_bits; - u16 tx_pcr_bits; -#if 0 - u16 tx_scr_bits; - u16 tx_bucket_bits; -#endif - hrz_aal aal; -} hrz_vcc; - -struct hrz_dev { - - u32 iobase; - u32 * membase; - - struct sk_buff * rx_skb; // skb being RXed - unsigned int rx_bytes; // bytes remaining to RX within region - void * rx_addr; // addr to send bytes to (for PIO) - unsigned int rx_channel; // channel that the skb is going out on - - struct sk_buff * tx_skb; // skb being TXed - unsigned int tx_bytes; // bytes remaining to TX within region - void * tx_addr; // addr to send bytes from (for PIO) - struct iovec * tx_iovec; // remaining regions - unsigned int tx_regions; // number of remaining regions - - spinlock_t mem_lock; - wait_queue_head_t tx_queue; - - u8 irq; - unsigned long flags; - u8 tx_last; - u8 tx_idle; - - rx_q_entry * rx_q_reset; - rx_q_entry * rx_q_entry; - rx_q_entry * rx_q_wrap; - - struct atm_dev * atm_dev; - - u32 last_vc; - - int noof_spare_buffers; - u16 spare_buffers[SPARE_BUFFER_POOL_SIZE]; - - u16 tx_channel_record[TX_CHANS]; - - // this is what we follow when we get incoming data - u32 txer[MAX_VCS/32]; - struct atm_vcc * rxer[MAX_VCS]; - - // cell rate allocation - spinlock_t rate_lock; - unsigned int rx_avail; - unsigned int tx_avail; - - // dev stats - unsigned long tx_cell_count; - unsigned long rx_cell_count; - unsigned long hec_error_count; - unsigned long unassigned_cell_count; - - struct pci_dev * pci_dev; - struct timer_list housekeeping; -}; - -typedef struct hrz_dev hrz_dev; - -/* macros for use later */ - -#define BUF_PTR(cbptr) ((cbptr) - (cell_buf *) 0) - -#define INTERESTING_INTERRUPTS \ - (RX_DATA_AV | RX_DISABLED | TX_BUS_MASTER_COMPLETE | RX_BUS_MASTER_COMPLETE) - -// 190 cells by default (192 TX buffers - 2 elbow room, see docs) -#define TX_AAL5_LIMIT (190*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER) // 9112 - -// Have enough RX buffers (unless we allow other buffer splits) -#define RX_AAL5_LIMIT ATM_MAX_AAL5_PDU - -/* multi-statement macro protector */ -#define DW(x) do{ x } while(0) - -#define HRZ_DEV(atm_dev) ((hrz_dev *) (atm_dev)->dev_data) -#define HRZ_VCC(atm_vcc) ((hrz_vcc *) (atm_vcc)->dev_data) - -/* Turn the LEDs on and off */ -// The LEDs bits are upside down in that setting the bit in the debug -// register will turn the appropriate LED off. - -#define YELLOW_LED DEBUG_BIT_0 -#define GREEN_LED DEBUG_BIT_1 -#define YELLOW_LED_OE DEBUG_BIT_0_OE -#define GREEN_LED_OE DEBUG_BIT_1_OE - -#define GREEN_LED_OFF(dev) \ - wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | GREEN_LED) -#define GREEN_LED_ON(dev) \ - wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ GREEN_LED) -#define YELLOW_LED_OFF(dev) \ - wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | YELLOW_LED) -#define YELLOW_LED_ON(dev) \ - wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ YELLOW_LED) - -typedef enum { - round_up, - round_down, - round_nearest -} rounding; - -#endif /* DRIVER_ATM_HORIZON_H */ |